-%% TeX macros to handle texinfo files
+%% TeX macros to handle Texinfo files.
+%% $Id: texinfo.tex,v 2.203 1997/06/05 22:04:25 karl Exp karl $
% Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
-% 94, 95, 1996 Free Software Foundation, Inc.
+% 94, 95, 96, 97 Free Software Foundation, Inc.
%This texinfo.tex file is free software; you can redistribute it and/or
%modify it under the terms of the GNU General Public License as
% This automatically updates the version number based on RCS.
\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
-\deftexinfoversion$Revision: 2.178 $
+\deftexinfoversion$Revision: 2.203 $
\message{Loading texinfo package [Version \texinfoversion]:}
% If in a .fmt file, print the version number
% Save some parts of plain tex whose names we will redefine.
-\let\ptextilde=\~
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexdots=\dots
-\let\ptexdot=\.
-\let\ptexstar=\*
-\let\ptexend=\end
-\let\ptexbullet=\bullet
\let\ptexb=\b
+\let\ptexbullet=\bullet
\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv = \equiv
\let\ptexi=\i
+\let\ptexlbrace=\{
+\let\ptexrbrace=\}
+\let\ptexstar=\*
\let\ptext=\t
-\let\ptexl=\l
-\let\ptexL=\L
% Be sure we're in horizontal mode when doing a tie, since we make space
% equivalent to this in @example-like environments. Otherwise, a space
\global\let\tiepenalty = \@M
\gdef\tie{\leavevmode\penalty\tiepenalty\ }
}
-\let\~ = \tie % And make it available as @~.
+
\message{Basics,}
\chardef\other=12
\hyphenation{eshell}
% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset \bindingoffset=0pt
-\newdimen \normaloffset \normaloffset=\hoffset
+\newdimen \bindingoffset
+\newdimen \normaloffset
\newdimen\pagewidth \newdimen\pageheight
-\pagewidth=\hsize \pageheight=\vsize
% Sometimes it is convenient to have everything in the transcript file
% and nothing on the terminal. We don't just call \tracingall here,
\showboxbreadth\maxdimen\showboxdepth\maxdimen
}%
-%---------------------Begin change-----------------------
+% For @cropmarks command.
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
%
-%%%% For @cropmarks command.
-% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
%
\newdimen\cornerlong \newdimen\cornerthick
-\newdimen \topandbottommargin
-\newdimen \outerhsize \newdimen \outervsize
-\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
+\newdimen\topandbottommargin
+\newdimen\outerhsize \newdimen\outervsize
+\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
\outerhsize=7in
%\outervsize=9.5in
% Alternative @smallbook page size is 9.25in
\outervsize=9.25in
\topandbottommargin=.75in
-%
-%---------------------End change-----------------------
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions itself, but you have to call it yourself.
-\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}}
-\def\onepageout#1{\hoffset=\normaloffset
-\ifodd\pageno \advance\hoffset by \bindingoffset
-\else \advance\hoffset by -\bindingoffset\fi
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
-\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}%
-{\let\hsize=\pagewidth \makefootline}}}%
-\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-
-%%%% For @cropmarks command %%%%
-
-% Here is a modification of the main output routine for Near East Publications
-% This provides right-angle cropmarks at all four corners.
-% The contents of the page are centerlined into the cropmarks,
-% and any desired binding offset is added as an \hskip on either
-% site of the centerlined box. (P. A. MacKay, 12 November, 1986)
-%
-\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
- \shipout
- \vbox to \outervsize{\hsize=\outerhsize
- \vbox{\line{\ewtop\hfill\ewtop}}
- \nointerlineskip
- \line{\vbox{\moveleft\cornerthick\nstop}
- \hfill
- \vbox{\moveright\cornerthick\nstop}}
- \vskip \topandbottommargin
- \centerline{\ifodd\pageno\hskip\bindingoffset\fi
- \vbox{
- {\let\hsize=\pagewidth \makeheadline}
- \pagebody{#1}
- {\let\hsize=\pagewidth \makefootline}}
- \ifodd\pageno\else\hskip\bindingoffset\fi}
- \vskip \topandbottommargin plus1fill minus1fill
- \boxmaxdepth\cornerthick
- \line{\vbox{\moveleft\cornerthick\nsbot}
- \hfill
- \vbox{\moveright\cornerthick\nsbot}}
- \nointerlineskip
- \vbox{\line{\ewbot\hfill\ewbot}}
- }}
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+ \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+ %
+ \ifodd\pageno \advance\hoffset by \bindingoffset
+ \else \advance\hoffset by -\bindingoffset\fi
+ %
+ % Do this outside of the \shipout so @code etc. will be expanded in
+ % the headline as they should be, not taken literally (outputting ''code).
+ \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+ \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+ %
+ {%
+ % Have to do this stuff outside the \shipout because we want it to
+ % take effect in \write's, yet the group defined by the \vbox ends
+ % before the \shipout runs.
+ %
+ \escapechar = `\\ % use backslash in output files.
+ \indexdummies % don't expand commands in the output.
+ \normalturnoffactive % \ in index entries must not stay \, e.g., if
+ % the page break happens to be in the middle of an example.
+ \shipout\vbox{%
+ \ifcropmarks \vbox to \outervsize\bgroup
+ \hsize = \outerhsize
+ \line{\ewtop\hfil\ewtop}%
+ \nointerlineskip
+ \line{%
+ \vbox{\moveleft\cornerthick\nstop}%
+ \hfill
+ \vbox{\moveright\cornerthick\nstop}%
+ }%
+ \vskip\topandbottommargin
+ \line\bgroup
+ \hfil % center the page within the outer (page) hsize.
+ \ifodd\pageno\hskip\bindingoffset\fi
+ \vbox\bgroup
+ \fi
+ %
+ \unvbox\headlinebox
+ \pagebody{#1}%
+ \unvbox\footlinebox
+ %
+ \ifcropmarks
+ \egroup % end of \vbox\bgroup
+ \hfil\egroup % end of (centering) \line\bgroup
+ \vskip\topandbottommargin plus1fill minus1fill
+ \boxmaxdepth = \cornerthick
+ \line{%
+ \vbox{\moveleft\cornerthick\nsbot}%
+ \hfill
+ \vbox{\moveright\cornerthick\nsbot}%
+ }%
+ \nointerlineskip
+ \line{\ewbot\hfil\ewbot}%
+ \egroup % \vbox from first cropmarks clause
+ \fi
+ }% end of \shipout\vbox
+ }% end of group with \turnoffactive
\advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-%
-% Do @cropmarks to get crop marks
-\def\cropmarks{\let\onepageout=\croppageout }
+ \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
\newinsert\margin \dimen\margin=\maxdimen
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
}
-%
% Here are the rules for the cropmarks. Note that they are
% offset so that the space between them is truly \outerhsize or \outervsize
% (P. A. MacKay, 12 November, 1986)
%\def\'{{'}}
% Used to generate quoted braces.
-
\def\mylbrace {{\tt \char '173}}
\def\myrbrace {{\tt \char '175}}
\let\{=\mylbrace
\let\}=\myrbrace
+\begingroup
+ % Definitions to produce actual \{ & \} command in an index.
+ \catcode`\{ = 12 \catcode`\} = 12
+ \catcode`\[ = 1 \catcode`\] = 2
+ \catcode`\@ = 0 \catcode`\\ = 12
+ @gdef@lbracecmd[\{]%
+ @gdef@rbracecmd[\}]%
+@endgroup
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown
+% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+ \def\temp{#1}%
+ \ifx\temp\imacro \ptexi
+ \else\ifx\temp\jmacro \j
+ \else \errmessage{@dotless can be used only with i or j}%
+ \fi\fi
+}
% @: forces normal size whitespace following.
\def\:{\spacefactor=1000 }
% @sp n outputs n lines of vertical space
\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\par \vskip #1\baselineskip}
+\def\spxxx #1{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
\def\menu{\doignore{menu}}
\def\direntry{\doignore{direntry}}
+% Also ignore @macro ... @end macro. The user must run texi2dvi,
+% which runs makeinfo to do macro expansion. Ignore @unmacro, too.
+\def\macro{\doignore{macro}}
+\let\unmacro = \comment
+
+
% @dircategory CATEGORY -- specify a category of the dir file
% which this file should belong to. Ignore this in TeX.
-
-\def\dircategory{\comment}
+\let\dircategory = \comment
% Ignore text until a line `@end #1'.
%
\immediate\write16{If you are running another version of TeX, relax.}
\immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
\immediate\write16{ Then upgrade your TeX installation if you can.}
+ \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
\immediate\write16{If you are stuck with version 3.0, run the}
\immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
\immediate\write16{ to use a workaround.}
% didn't need it. Make sure the catcode of space is correct to avoid
% losing inside @example, for instance.
%
-\def\set{\begingroup\catcode` =10 \parsearg\setxxx}
+\def\set{\begingroup\catcode` =10
+ \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+ \parsearg\setxxx}
\def\setxxx#1{\setyyy#1 \endsetyyy}
\def\setyyy#1 #2\endsetyyy{%
\def\temp{#2}%
% @value{foo} gets the text saved in variable foo.
%
-\def\value#1{\expandafter
- \ifx\csname SET#1\endcsname\relax
- {\{No value for ``#1''\}}
- \else \csname SET#1\endcsname \fi}
+\def\value{\begingroup
+ \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+ \valuexxx}
+\def\valuexxx#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ {\{No value for ``#1''\}}%
+ \else
+ \csname SET#1\endcsname
+ \fi
+\endgroup}
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
\global\let\lastnode=\relax}
+% @refill is a no-op.
\let\refill=\relax
% @setfilename is done at the beginning of every texinfo file.
\comment % Ignore the actual filename.
}
+% @bye.
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-\def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
-\def\macroxxx#1#2 \end macro{%
-\expandafter\gdef\macrotemp#1{#2}%
-\endgroup}
+% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
+% \def\macroxxx#1#2 \end macro{%
+% \expandafter\gdef\macrotemp#1{#2}%
+% \endgroup}
%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
%\def\linemacroxxx#1#2 \end linemacro{%
%\def\butfirst#1{}
+
\message{fonts,}
% Font-change commands.
% We don't need math for this one.
\def\ttsl{\tenttsl}
-%% Try out Computer Modern fonts at \magstephalf
-\let\mainmagstep=\magstephalf
+% Use Computer Modern fonts at \magstephalf (11pt).
+\newcount\mainmagstep
+\mainmagstep=\magstephalf
% Set the font macro #1 to the font named #2, adding on the
% specified font prefix (normally `cm').
\fi
% Support font families that don't use the same naming scheme as CM.
\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
+\def\rmbshape{bx} %where the normal face is bold
\def\bfshape{b}
\def\bxshape{bx}
\def\ttshape{tt}
% \setfont\ssectt\ttshape{10}{\magstep1}
% \setfont\ssecsf\sfshape{10}{\magstep1}
-%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
-%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
-%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
+%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
+%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
+%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
%\setfont\ssectt\ttshape{10}{1315}
%\setfont\ssecsf\sfshape{10}{1315}
\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
\raise0.4pt\hbox{$\langle$}\kern-.08em\vtop{%
\vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}\uppercase{#1}}}%
+ \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}#1}}%
\kern-0.4pt\hrule}%
\kern-.06em\raise0.4pt\hbox{$\rangle$}}}}
+% The old definition, with no lozenge:
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
\let\file=\samp
-\let\email=\samp
-\let\url=\samp % perhaps include a hypertex \special eventually
% @code is a modification of @t,
% which makes spaces the same size as normal in the surrounding text.
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
% both hyphenation at - and hyphenation within words.
% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate an a dash.
+% and arrange explicitly to hyphenate at a dash.
% -- rms.
{
\catcode`\-=\active
\catcode`\_=\active
+\catcode`\|=\active
\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
% The following is used by \doprintindex to insure that long function names
% wrap around. It is necessary for - and _ to be active before the index is
% read from the file, as \entry parses the arguments long before \code is
% ever called. -- mycroft
-\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
+% _ is always active; and it shouldn't be \let = to an _ that is a
+% subscript character anyway. Then, @cindex @samp{_} (for example)
+% fails. --karl
+\global\def\indexbreaks{%
+ \catcode`\-=\active \let-\realdash
+}
}
\def\realdash{-}
-\def\realunder{_}
\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{\normalunderscore\discretionary{}{}{}}
+\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
\def\codex #1{\tclose{#1}\endgroup}
%\let\exp=\tclose %Was temporary
\else{\tclose{\ttsl\look}}\fi
\else{\tclose{\ttsl\look}}\fi}
+% @url, @email. Quotes do not seem necessary.
+\let\url=\code % perhaps include a hypertex \special eventually
+% rms does not like the angle brackets --karl, 17may97.
+%\def\email#1{$\langle${\tt #1}$\rangle$}
+\let\email=\code
+
+% @uref (abbreviation for `urlref') takes an optional second argument
+% specifying the text to display. First (mandatory) arg is the url.
+%
+\def\uref#1{\urefxxx #1,,\finish}
+\def\urefxxx#1,#2,#3\finish{%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \unhbox0\ (\code{#1})%
+ \else
+ \code{#1}%
+ \fi
+}
+
% Check if we are currently using a typewriter font. Since all the
% Computer Modern typewriter fonts have zero interword stretch (and
% shrink), and it is reasonable to expect all typewriter fonts to have
% this property, we can check that font parameter.
-%
+%
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-\def\l#1{{\li #1}\null} %
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find. We need it for
+% Polish suppressed-l. --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
-\def\r#1{{\rm #1}} % roman font
+\def\r#1{{\rm #1}} % roman font
% Use of \lowercase was suggested.
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
+\def\sc#1{{\smallcaps#1}} % smallcaps font
+\def\ii#1{{\it #1}} % italic font
+
+% @pounds{} is a sterling sign.
+\def\pounds{{\it\$}}
+
\message{page headings,}
\def\shorttitlepage{\parsearg\shorttitlepagezzz}
\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
+ \endgroup\page\hbox{}\page}
\def\titlepage{\begingroup \parindent=0pt \textfonts
\let\subtitlerm=\tenrm
% Now you can print the title using @title.
\def\title{\parsearg\titlezzz}%
\def\titlezzz##1{\leftline{\titlefont{##1}}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
+ % print a rule at the page bottom also.
+ \finishedtitlepagefalse
+ \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
% No rule at page bottom unless we print one at the top with @title.
\finishedtitlepagetrue
%
\let\oldpage = \page
\def\page{%
\iffinishedtitlepage\else
- \finishtitlepage
+ \finishtitlepage
\fi
\oldpage
\let\page = \oldpage
%
}% unbind the catcode of @.
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
+% @headings double turns headings on for double-sided printing.
+% @headings single turns headings on for single-sided printing.
+% @headings off turns them off.
+% @headings on same as @headings double, retained for compatibility.
+% @headings after turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
% @headings singleafter turns on single-sided headings after this page.
% By default, they are off at the start of a document,
% and turned `on' after @end titlepage.
\def\settitle{\parsearg\settitlezzz}
\def\settitlezzz #1{\gdef\thistitle{#1}}
+
\message{tables,}
% @tabs -- simple alignment
\def\itemizeitem{%
\advance\itemno by 1
{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{\in hmode at itemizeitem}\fi
+\ifhmode \errmessage{In hmode at itemizeitem}\fi
{\parskip=0in \hskip 0pt
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
\vadjust{\penalty 1200}}%
% To make preamble:
%
-% Either define widths of columns in terms of percent of \hsize:
+% Either define widths of columns in terms of percent of \hsize:
% @multitable @columnfractions .25 .3 .45
% @item ...
%
% current hsize to be used for each column. You may use as many
% columns as desired.
+
% Or use a template:
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item ...
% the preamble, break the line within one argument and it
% will parse correctly, i.e.,
%
-% @multitable {Column 1 template} {Column 2 template} {Column 3
+% @multitable {Column 1 template} {Column 2 template} {Column 3
% template}
% Not:
-% @multitable {Column 1 template} {Column 2 template}
+% @multitable {Column 1 template} {Column 2 template}
% {Column 3 template}
-% Each new table line starts with @item, each subsequent new column
+% Each new table line starts with @item, each subsequent new column
% starts with @tab. Empty columns may be produced by supplying @tab's
% with nothing between them for as many times as empty columns are needed,
% ie, @tab@tab@tab will produce two empty columns.
-% @item, @tab, @multicolumn or @endmulticolumn do not need to be on their
+% @item, @tab, @multitable or @end multitable do not need to be on their
% own lines, but it will not hurt if they are.
% Sample multitable:
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
% @tab Many paragraphs of text may be used in any column.
-%
+%
% They will wrap at the width determined by the template.
% @item@tab@tab This will be in third column.
% @end multitable
% 0pt means it depends on current normal line spacing.
%%%%
-% Dimensions
+% Dimensions
\newskip\multitableparskip
\newskip\multitableparindent
% We don't need this so we don't use it.
\else
\global\advance\colcount by1
- \setbox0=\hbox{#1}%
+ \setbox0=\hbox{#1 }% Add a normal word space as a separator;
+ % typically that is always in the input, anyway.
\expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
\fi%
\fi%
% To parse everything between @multitable and @item :
\setuptable#1 \endsetuptable
% Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax%
+\global\colcount=0\relax%
%
% This preamble sets up a generic column definition, which will
% be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
+ % \vtop will set a single line and will also let text wrap and
% continue for many paragraphs if desired.
\halign\bgroup&\global\advance\colcount by 1\relax%
\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
% In order to keep entries from bumping into each other
% we will add a \leftskip of \multitablecolspace to all columns after
% the first one.
- % If a template has been used, we will add \multitablecolspace
+ % If a template has been used, we will add \multitablecolspace
% to the width of each template entry.
% If user has set preamble in terms of percent of \hsize
% we will use that dimension as the width of the column, and
\ifsetpercent
\else
% If user has <not> set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace
+ % we will advance \hsize by \multitablecolspace
\advance\hsize by \multitablecolspace
\fi
% In either case we will make \leftskip=\multitablecolspace:
\leftskip=\multitablecolspace
\fi
-\noindent##}\cr%
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively marking
+ % characters.
+ \noindent\ignorespaces##\unskip\multistrut}\cr
% \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
+ % each line. Every column entry will cause \colcount to advance by one.
% The table preamble
% looks at the current \colcount to find the correct column width.
\global\everycr{\noalign{%
-\filbreak%% keeps underfull box messages off when table breaks over pages.
+% \filbreak%% keeps underfull box messages off when table breaks over pages.
+% Maybe so, but it also creates really weird page breaks when the table
+% breaks over pages Wouldn't \vfil be better? Wait until the problem
+% manifests itself, so it can be fixed for real --karl.
\global\colcount=0\relax}}
}
\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
% If so, do nothing. If not, give it an appropriate dimension based on
% current baselineskip.
-\setbox0=\vbox{Xy}
\ifdim\multitablelinespace=0pt
%% strut to put in table in case some entry doesn't have descenders,
%% to keep lines equally spaced
-\gdef\multistrut{\vrule height\ht0 depth\dp0 width0pt\relax}
+\let\multistrut = \strut
%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
+%% table. If not, do nothing.
%% If so, set to same dimension as multitablelinespace.
\else
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
%% than skip between lines in the table.
\fi}
+
+
\message{indexing,}
% Index generation facilities
% It automatically defines \fooindex such that
% \fooindex ...rest of line... puts an entry in the index foo.
% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
+% the file that accumulates this index. The file's extension is foo.
% The name of an index should be no more than 2 characters long
% for the sake of vms.
\def\newindex #1{
\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\doindex {#1}}
}
\def\newcodeindex #1{
\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\docodeindex {#1}}
}
\def\synindex #1 #2 {%
\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\doindex {#2}}%
}
\def\syncodeindex #1 #2 {%
\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\docodeindex {#2}}%
}
\def\L{\realbackslash L}%
\def\ss{\realbackslash ss}%
% Take care of texinfo commands likely to appear in an index entry.
+% (Must be a way to avoid doing expansion at all, and thus not have to
+% laboriously list every single command here.)
+\def\@{@}% will be @@ when we switch to @ as escape char.
+%\let\{ = \lbracecmd
+%\let\} = \rbracecmd
\def\_{{\realbackslash _}}%
\def\w{\realbackslash w }%
\def\bf{\realbackslash bf }%
-\def\rm{\realbackslash rm }%
+%\def\rm{\realbackslash rm }%
\def\sl{\realbackslash sl }%
\def\sf{\realbackslash sf}%
\def\tt{\realbackslash tt}%
\def\gtr{\realbackslash gtr}%
\def\less{\realbackslash less}%
\def\hat{\realbackslash hat}%
-\def\char{\realbackslash char}%
+%\def\char{\realbackslash char}%
\def\TeX{\realbackslash TeX}%
\def\dots{\realbackslash dots }%
\def\copyright{\realbackslash copyright }%
\def\tclose##1{\realbackslash tclose {##1}}%
\def\code##1{\realbackslash code {##1}}%
+\def\dotless##1{\realbackslash dotless {##1}}%
\def\samp##1{\realbackslash samp {##1}}%
-\def\t##1{\realbackslash r {##1}}%
+\def\,##1{\realbackslash ,{##1}}%
+\def\t##1{\realbackslash t {##1}}%
\def\r##1{\realbackslash r {##1}}%
\def\i##1{\realbackslash i {##1}}%
\def\b##1{\realbackslash b {##1}}%
+\def\sc##1{\realbackslash sc {##1}}%
\def\cite##1{\realbackslash cite {##1}}%
\def\key##1{\realbackslash key {##1}}%
\def\file##1{\realbackslash file {##1}}%
\def\indexnofonts{%
% Just ignore accents.
+\let\,=\indexdummyfont
\let\"=\indexdummyfont
\let\`=\indexdummyfont
\let\'=\indexdummyfont
\let\u=\indexdummyfont
\let\v=\indexdummyfont
\let\H=\indexdummyfont
+\let\dotless=\indexdummyfont
% Take care of the plain tex special European modified letters.
\def\oe{oe}%
\def\ae{ae}%
\let\var=\indexdummyfont
\let\TeX=\indexdummytex
\let\dots=\indexdummydots
+\def\@{@}%
}
% To define \realbackslash, we must make \ not be an escape.
% workhorse for all \fooindexes
% #1 is name of index, #2 is stuff to put there
\def\doind #1#2{%
-% Put the index entry in the margin if desired.
-\ifx\SETmarginindex\relax\else%
-\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
-\fi%
-{\count10=\lastpenalty %
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\escapechar=`\\%
-{\let\folio=0% Expand all macros now EXCEPT \folio
-\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
-% so it will be output as is; and it will print as backslash in the indx.
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}}}%
-\temp }%
-}\penalty\count10}}
+ % Put the index entry in the margin if desired.
+ \ifx\SETmarginindex\relax\else
+ \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
+ \fi
+ {%
+ \count255=\lastpenalty
+ {%
+ \indexdummies % Must do this here, since \bf, etc expand at this stage
+ \escapechar=`\\
+ {%
+ \let\folio=0% We will expand all macros now EXCEPT \folio.
+ \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
+ % so it will be output as is; and it will print as backslash.
+ %
+ % First process the index-string with all font commands turned off
+ % to get the string to sort by.
+ {\indexnofonts \xdef\indexsorttmp{#2}}%
+ %
+ % Now produce the complete index entry, with both the sort key and the
+ % original text, including any font commands.
+ \toks0 = {#2}%
+ \edef\temp{%
+ \write\csname#1indfile\endcsname{%
+ \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
+ }%
+ \temp
+ }%
+ }%
+ \penalty\count255
+ }%
+}
\def\dosubind #1#2#3{%
{\count10=\lastpenalty %
% Define the macros used in formatting output of the sorted index material.
-% This is what you call to cause a particular index to get printed.
-% Write
-% @unnumbered Function Index
-% @printindex fn
-
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
\def\printindex{\parsearg\doprintindex}
-
\def\doprintindex#1{\begingroup
\dobreak \chapheadingskip{10000}%
%
\indexfonts \rm
\tolerance = 9500
\indexbreaks
- \def\indexbackslash{\rawbackslashxx}%
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \catcode`\\ = 0
- \begindoublecolumns
%
% See if the index file exists and is nonempty.
\openin 1 \jobname.#1s
\ifeof 1
(Index is empty)
\else
+ % Index files are almost Texinfo source, but we use \ as the escape
+ % character. It would be better to use @, but that's too big a change
+ % to make right now.
+ \def\indexbackslash{\rawbackslashxx}%
+ \catcode`\\ = 0
+ \catcode`\@ = 11
+ \escapechar = `\\
+ \begindoublecolumns
\input \jobname.#1s
+ \enddoublecolumns
\fi
\fi
\closein 1
- \enddoublecolumns
\endgroup}
% These macros are used by the sorted index file itself.
\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
}}
-%% Define two-column mode, which is used in indexes.
-%% Adapted from the TeXbook, page 416.
-\catcode `\@=11
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
\newbox\partialpage
-
\newdimen\doublecolumnhsize
-\def\begindoublecolumns{\begingroup
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
% Grab any single-column material above us.
- \output = {\global\setbox\partialpage
- =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
+ \output = {\global\setbox\partialpage = \vbox{%
+ %
+ % Here is a possibility not foreseen in manmac: if we accumulate a
+ % whole lot of material, we might end up calling this \output
+ % routine twice in a row (see the doublecol-lose test, which is
+ % essentially a couple of indexes with @setchapternewpage off). In
+ % that case, we must prevent the second \partialpage from
+ % simply overwriting the first, causing us to lose the page.
+ % This will preserve it until a real output routine can ship it
+ % out. Generally, \partialpage will be empty when this runs and
+ % this will be a no-op.
+ \unvbox\partialpage
+ %
+ % Unvbox the main output page.
+ \unvbox255
+ \kern-\topskip \kern\baselineskip
+ }}%
\eject
%
- % Now switch to the double-column output routine.
- \output={\doublecolumnout}%
+ % Use the double-column output routine for subsequent pages.
+ \output = {\doublecolumnout}%
%
% Change the page size parameters. We could do this once outside this
% routine, in each of @smallbook, @afourpaper, and the default 8.5x11
% format, but then we repeat the same computation. Repeating a couple
% of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it once.
+ % execution time, so we may as well do it in one place.
%
% First we halve the line length, less a little for the gutter between
% the columns. We compute the gutter based on the line length, so it
% changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +- <
- % 1pt) as it did when we hard-coded it.
+ % below is chosen so that the gutter has the same value (well, +-<1pt)
+ % as it did when we hard-coded it.
%
% We put the result in a separate register, \doublecolumhsize, so we
% can restore it in \pagesofar, after \hsize itself has (potentially)
% Double the \vsize as well. (We don't need a separate register here,
% since nobody clobbers \vsize.)
\vsize = 2\vsize
- \doublecolumnpagegoal
}
-
-\def\enddoublecolumns{\eject \endgroup \pagegoal=\vsize \unvbox\partialpage}
-
-\def\doublecolumnsplit{\splittopskip=\topskip \splitmaxdepth=\maxdepth
- \global\dimen@=\pageheight \global\advance\dimen@ by-\ht\partialpage
- \global\setbox1=\vsplit255 to\dimen@ \global\setbox0=\vbox{\unvbox1}
- \global\setbox3=\vsplit255 to\dimen@ \global\setbox2=\vbox{\unvbox3}
- \ifdim\ht0>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi
- \ifdim\ht2>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi
+\def\doublecolumnout{%
+ \splittopskip=\topskip \splitmaxdepth=\maxdepth
+ % Get the available space for the double columns -- the normal
+ % (undoubled) page height minus any material left over from the
+ % previous page.
+ \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
+ % box0 will be the left-hand column, box2 the right.
+ \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+ \onepageout\pagesofar
+ \unvbox255
+ \penalty\outputpenalty
}
-\def\doublecolumnpagegoal{%
- \dimen@=\vsize \advance\dimen@ by-2\ht\partialpage \global\pagegoal=\dimen@
+\def\pagesofar{%
+ % Re-output the contents of the output page -- any previous material,
+ % followed by the two boxes we just split.
+ \unvbox\partialpage
+ \hsize = \doublecolumnhsize
+ \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
}
-\def\pagesofar{\unvbox\partialpage %
- \hsize=\doublecolumnhsize % have to restore this since output routine
- \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}}
-\def\doublecolumnout{%
- \setbox5=\copy255
- {\vbadness=10000 \doublecolumnsplit}
- \ifvbox255
- \setbox0=\vtop to\dimen@{\unvbox0}
- \setbox2=\vtop to\dimen@{\unvbox2}
- \onepageout\pagesofar \unvbox255 \penalty\outputpenalty
- \else
- \setbox0=\vbox{\unvbox5}
- \ifvbox0
- \dimen@=\ht0 \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
- \divide\dimen@ by2 \splittopskip=\topskip \splitmaxdepth=\maxdepth
- {\vbadness=10000
- \loop \global\setbox5=\copy0
- \setbox1=\vsplit5 to\dimen@
- \setbox3=\vsplit5 to\dimen@
- \ifvbox5 \global\advance\dimen@ by1pt \repeat
- \setbox0=\vbox to\dimen@{\unvbox1}
- \setbox2=\vbox to\dimen@{\unvbox3}
- \global\setbox\partialpage=\vbox{\pagesofar}
- \doublecolumnpagegoal
- }
- \fi
- \fi
+\def\enddoublecolumns{%
+ \output = {\balancecolumns}\eject % split what we have
+ \endgroup % started in \begindoublecolumns
+ %
+ % Back to normal single-column typesetting, but take account of the
+ % fact that we just accumulated some stuff on the output page.
+ \pagegoal = \vsize
}
+\def\balancecolumns{%
+ % Called at the end of the double column material.
+ \setbox0 = \vbox{\unvbox255}%
+ \dimen@ = \ht0
+ \advance\dimen@ by \topskip
+ \advance\dimen@ by-\baselineskip
+ \divide\dimen@ by 2
+ \splittopskip = \topskip
+ % Loop until we get a decent breakpoint.
+ {\vbadness=10000 \loop
+ \global\setbox3=\copy0
+ \global\setbox1=\vsplit3 to\dimen@
+ \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
+ \repeat}%
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ \pagesofar
+}
+\catcode`\@ = \other
+
-\catcode `\@=\other
\message{sectioning,}
% Define chapters, sections, etc.
-\newcount \chapno
-\newcount \secno \secno=0
-\newcount \subsecno \subsecno=0
-\newcount \subsubsecno \subsubsecno=0
+\newcount\chapno
+\newcount\secno \secno=0
+\newcount\subsecno \subsecno=0
+\newcount\subsubsecno \subsubsecno=0
% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount \appendixno \appendixno = `\@
+\newcount\appendixno \appendixno = `\@
\def\appendixletter{\char\the\appendixno}
-\newwrite \contentsfile
+\newwrite\contentsfile
% This is called from \setfilename.
-\def\opencontents{\openout \contentsfile = \jobname.toc}
+\def\opencontents{\openout\contentsfile = \jobname.toc }
% Each @chapter defines this as the name of the chapter.
% page headings and footings can use it. @section does likewise
\def\thischapter{} \def\thissection{}
-\def\seccheck#1{\if \pageno<0 %
-\errmessage{@#1 not allowed after generating table of contents}\fi
-%
-}
+\def\seccheck#1{\ifnum \pageno<0
+ \errmessage{@#1 not allowed after generating table of contents}%
+\fi}
\def\chapternofonts{%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\def\result{\realbackslash result}
-\def\equiv{\realbackslash equiv}
-\def\expansion{\realbackslash expansion}
-\def\print{\realbackslash print}
-\def\TeX{\realbackslash TeX}
-\def\dots{\realbackslash dots}
-\def\copyright{\realbackslash copyright}
-\def\tt{\realbackslash tt}
-\def\bf{\realbackslash bf }
-\def\w{\realbackslash w}
-\def\less{\realbackslash less}
-\def\gtr{\realbackslash gtr}
-\def\hat{\realbackslash hat}
-\def\char{\realbackslash char}
-\def\tclose##1{\realbackslash tclose {##1}}
-\def\code##1{\realbackslash code {##1}}
-\def\samp##1{\realbackslash samp {##1}}
-\def\r##1{\realbackslash r {##1}}
-\def\b##1{\realbackslash b {##1}}
-\def\key##1{\realbackslash key {##1}}
-\def\file##1{\realbackslash file {##1}}
-\def\kbd##1{\realbackslash kbd {##1}}
-% These are redefined because @smartitalic wouldn't work inside xdef.
-\def\i##1{\realbackslash i {##1}}
-\def\cite##1{\realbackslash cite {##1}}
-\def\var##1{\realbackslash var {##1}}
-\def\emph##1{\realbackslash emph {##1}}
-\def\dfn##1{\realbackslash dfn {##1}}
+ \let\rawbackslash=\relax
+ \let\frenchspacing=\relax
+ \def\result{\realbackslash result}%
+ \def\equiv{\realbackslash equiv}%
+ \def\expansion{\realbackslash expansion}%
+ \def\print{\realbackslash print}%
+ \def\TeX{\realbackslash TeX}%
+ \def\dots{\realbackslash dots}%
+ \def\copyright{\realbackslash copyright}%
+ \def\tt{\realbackslash tt}%
+ \def\bf{\realbackslash bf}%
+ \def\w{\realbackslash w}%
+ \def\less{\realbackslash less}%
+ \def\gtr{\realbackslash gtr}%
+ \def\hat{\realbackslash hat}%
+ \def\char{\realbackslash char}%
+ \def\tclose##1{\realbackslash tclose{##1}}%
+ \def\code##1{\realbackslash code{##1}}%
+ \def\samp##1{\realbackslash samp{##1}}%
+ \def\r##1{\realbackslash r{##1}}%
+ \def\b##1{\realbackslash b{##1}}%
+ \def\key##1{\realbackslash key{##1}}%
+ \def\file##1{\realbackslash file{##1}}%
+ \def\kbd##1{\realbackslash kbd{##1}}%
+ % These are redefined because @smartitalic wouldn't work inside xdef.
+ \def\i##1{\realbackslash i{##1}}%
+ \def\cite##1{\realbackslash cite{##1}}%
+ \def\var##1{\realbackslash var{##1}}%
+ \def\emph##1{\realbackslash emph{##1}}%
+ \def\dfn##1{\realbackslash dfn{##1}}%
}
\newcount\absseclevel % used to calculate proper heading level
% because we don't want its macros evaluated now.
\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
{\chapternofonts%
-\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
\gdef\thischaptername{#1}%
\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
{\chapternofonts%
-\edef\temp{{\realbackslash chapentry
- {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash chapentry{\the\toks0}%
+ {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\unnumbchapmacro {#1}%
\gdef\thischapter{#1}\gdef\thissection{#1}%
{\chapternofonts%
-\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
{\chapternofonts%
+\toks0 = {#1}%
\edef\temp{{\realbackslash secentry %
-{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
+{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
{\chapternofonts%
+\toks0 = {#1}%
\edef\temp{{\realbackslash secentry %
-{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
+{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
\plainsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
-\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
{\chapternofonts%
+\toks0 = {#1}%
\edef\temp{{\realbackslash subsecentry %
-{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
{\chapternofonts%
+\toks0 = {#1}%
\edef\temp{{\realbackslash subsecentry %
-{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
\plainsubsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
-\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\subsubsecheading {#1}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
{\chapternofonts%
-\edef\temp{{\realbackslash subsubsecentry %
- {#1}
+\toks0 = {#1}%
+\edef\temp{{\realbackslash subsubsecentry{\the\toks0}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
{\noexpand\folio}}}%
\escapechar=`\\%
\subsubsecheading {#1}
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
{\chapternofonts%
-\edef\temp{{\realbackslash subsubsecentry{#1}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
{\appendixletter}
{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
\escapechar=`\\%
\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
\plainsubsubsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
% NOTE on use of \vbox for chapter headings, section headings, and
% such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
+% 1) We use \vbox rather than the earlier \line to permit
+% overlong headings to fold.
+% 2) \hyphenpenalty is set to 10000 because hyphenation in a
+% heading is obnoxious; this forbids it.
% 3) Likewise, headings look best if no \parindent is used, and
% if justification is not attempted. Hence \raggedright.
%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
-\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt
+\newskip\chapheadingskip
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
\global\let\unnumbchapmacro=\unnchfplain
\global\let\centerchapmacro=\centerchfplain}
-% #1 is the text, #2 the chapter number.
-\def\chfplain #1#2{%
+% Plain chapter opening.
+% #1 is the text, #2 the chapter number or empty if unnumbered.
+\def\chfplain#1#2{%
\pchapsepmacro
{%
\chapfonts \rm
- \setbox0 = \hbox{#2\enspace}%
+ \def\chapnum{#2}%
+ \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent = \wd0
- \unhbox0 #1}%
+ \hangindent = \wd0 \centerparametersmaybe
+ \unhbox0 #1\par}%
}%
\nobreak\bigskip % no page break after a chapter title
\nobreak
}
-\def\unnchfplain #1{%
-\pchapsepmacro %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 10000 %
-}
+% Plain opening for unnumbered.
+\def\unnchfplain#1{\chfplain{#1}{}}
-\def\centerchfplain #1{%
-\pchapsepmacro %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
-}
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerchfplain#1{{%
+ \def\centerparametersmaybe{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+ }%
+ \chfplain{#1}{}%
+}}
\CHAPFplain % The default
% Section titles.
-\newskip \secheadingskip \secheadingskip = 21pt plus 8pt minus 4pt
+\newskip\secheadingskip
\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
% Subsection titles.
-\newskip \subsecheadingskip \subsecheadingskip = 17pt plus 8pt minus 4pt
+\newskip \subsecheadingskip
\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
% Print any size section title.
-%
+%
% #1 is the section type (sec/subsec/subsubsec), #2 is the section
% number (maybe empty), #3 the text.
\def\sectionheading#1#2#3{%
\csname #1headingbreak\endcsname
}%
{%
+ % Switch to the right set of fonts.
\csname #1fonts\endcsname \rm
- \def\secnum{#2}%
+ %
% Only insert the separating space if we have a section number.
- \setbox0 = \hbox{#2\ifx\secnum\empty\else \enspace \fi}%
+ \def\secnum{#2}%
+ \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
+ %
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
\hangindent = \wd0 % zero if no section number
\unhbox0 #3}%
\message{toc printing,}
-
% Finish up the main text and prepare to read what we've written
% to \contentsfile.
\contentsalignmacro
\immediate\closeout \contentsfile
\ifnum \pageno>0
- \pageno = -1 % Request roman numbered pages.
+ \pageno = -1 % Request roman numbered pages.
\fi
% Don't need to put `Contents' or `Short Contents' in the headline.
% It is abundantly clear what they are.
\unnumbchapmacro{#1}\def\thischapter{}%
- \begingroup % Set up to handle contents files properly.
+ \begingroup % Set up to handle contents files properly.
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
\raggedbottom % Worry more about breakpoints than the bottom.
\secfonts
\let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
\rm
+ \hyphenpenalty = 10000
\advance\baselineskip by 1pt % Open it up a little.
\def\secentry ##1##2##3##4{}
\def\unnumbsecentry ##1##2{}
% This space should be plenty, since a single number is .5em, and the
% widest letter (M) is 1em, at least in the Computer Modern fonts.
% (This space doesn't include the extra space that gets added after
- % the label; that gets put in in \shortchapentry above.)
+ % the label; that gets put in by \shortchapentry above.)
\advance\dimen0 by 1.1em
\hbox to \dimen0{#1\hfil}%
}
\dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
-
% This parameter controls the indentation of the various levels.
\newdimen\tocindent \tocindent = 3pc
% Now for the actual typesetting. In all these, #1 is the text and #2 is the
% page number.
%
-% If the toc has to be broken over pages, we would want to be at chapters
+% If the toc has to be broken over pages, we want it to be at chapters
% if at all possible; hence the \penalty.
\def\dochapentry#1#2{%
- \penalty-300 \vskip\baselineskip
+ \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
\begingroup
\chapentryfonts
\tocentry{#1}{\dopageno{#2}}%
\endgroup
- \nobreak\vskip .25\baselineskip
+ \nobreak\vskip .25\baselineskip plus.1\baselineskip
}
\def\dosecentry#1#2{\begingroup
%
% \turnoffactive is for the sake of @" used for umlauts.
\def\tocentry#1#2{\begingroup
- \hyphenpenalty = 10000
+ \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
\entry{\turnoffactive #1}{\turnoffactive #2}%
\endgroup}
\newbox\pushcharbox \newbox\bullbox
\newbox\equivbox \newbox\errorbox
-\let\ptexequiv = \equiv
-
%{\tentt
%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
% depth .1ex\hfil}
%}
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
\def\point{$\star$}
-
\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-
\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
% Adapted from the TeXbook's \boxit.
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
\catcode `\%=14
-\catcode 43=12
+\catcode 43=12 % plus
\catcode`\"=12
\catcode`\==12
\catcode`\|=12
\catcode`\>=12
\escapechar=`\\
%
-\let\~=\ptextilde
+\let\,=\ptexcomma
\let\{=\ptexlbrace
\let\}=\ptexrbrace
\let\.=\ptexdot
\let\*=\ptexstar
\let\dots=\ptexdots
-\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}
-\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}
+\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
\def\@{@}%
\let\bullet=\ptexbullet
-\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl
-\let\L=\ptexL
+\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
%
\let\Etex=\endgroup}
\def\cbl{{\circle\char'012\hskip -6pt}}
\def\cbr{{\hskip 6pt\circle\char'011}}
\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
+ \ctl\leaders\hrule height\circthick\hfil\ctr
+ \hskip\rskip}}
\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
+ \cbl\leaders\hrule height\circthick\hfil\cbr
+ \hskip\rskip}}
%
\newskip\lskip\newskip\rskip
\long\def\cartouche{%
\begingroup
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt %we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18pt % allow for 3pt kerns on either
-% side, and for 6pt waste from
-% each corner char
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \hsize=\cartinner
- \kern3pt
- \begingroup
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
+ \lskip=\leftskip \rskip=\rightskip
+ \leftskip=0pt\rightskip=0pt %we want these *outside*.
+ \cartinner=\hsize \advance\cartinner by-\lskip
+ \advance\cartinner by-\rskip
+ \cartouter=\hsize
+ \advance\cartouter by 18pt % allow for 3pt kerns on either
+% side, and for 6pt waste from
+% each corner char
+ \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+ % Flag to tell @lisp, etc., not to narrow margin.
+ \let\nonarrowing=\comment
+ \vbox\bgroup
+ \baselineskip=0pt\parskip=0pt\lineskip=0pt
+ \carttop
+ \hbox\bgroup
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \hsize=\cartinner
+ \kern3pt
+ \begingroup
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \vskip -\parskip
\def\Ecartouche{%
- \endgroup
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
+ \endgroup
+ \kern3pt
+ \egroup
+ \kern3pt\vrule
+ \hskip\rskip
+ \egroup
+ \cartbot
+ \egroup
\endgroup
}}
% Definitions of (, ) and & used in args for functions.
% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
-\global\advance\parencount by 1 }
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
+ \global\advance\parencount by 1
+}
%
% This is the definition of ( when already inside a level of parens.
\gdef\opnested{\char`\(\global\advance\parencount by 1 }
%
\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
-% also in that case restore the outer-level definition of (.
-\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
-\global\advance \parencount by -1 }
+ % also in that case restore the outer-level definition of (.
+ \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+ \global\advance \parencount by -1 }
% If we encounter &foo, then turn on ()-hacking afterwards
\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
%
} % End of definition inside \activeparens
%% These parens (in \boldbrax) actually are a little bolder than the
%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
-\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
+\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
+\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
+\def\ampnr{\&}
+\def\lbrb{{\bf\char`\[}}
+\def\rbrb{{\bf\char`\]}}
% First, defname, which formats the header line itself.
% #1 should be the function name.
% This is used for \def{tp,vr}parsebody. It could probably be used for
% some of the others, too, with some judicious conditionals.
-%
+%
\def\parsebodycommon#1#2#3{%
\begingroup\inENV %
\medbreak %
}
% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any). That's what this does, putting the result in \tptemp.
-%
-\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
+% braces (if any). That's what this does.
+%
+\def\removeemptybraces\empty#1\relax{#1}
% After \spacesplit has done its work, this is called -- #1 is the final
% thing to call, #2 the type name (which starts with \empty), and #3
% (which might be empty) the arguments.
-%
+%
\def\parsetpheaderline#1#2#3{%
- \removeemptybraces#2\relax
- #1{\tptemp}{#3}%
+ #1{\removeemptybraces#2\relax}{#3}%
}%
\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
\hyphenchar\tensl=0
#1%
\hyphenchar\tensl=45
-\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
+\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
\interlinepenalty=10000
\advance\rightskip by 0pt plus 1fil
\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
+\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
% @defmethod, and so on
\defunargs {#3}\endgroup %
}
+% @deftypemethod foo-class return-type foo-method args
+%
+\def\deftypemethod{%
+ \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+%
+% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
+\def\deftypemethodheader#1#2#3#4{%
+ \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
+}
+
% @defmethod == @defop Method
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-% #1 is the data type. #2 is the name.
+% #1 is the data type. #2 is the name, perhaps followed by text that
+% is actually part of the data type, which should not be put into the index.
\def\deftypevarheader #1#2{%
-\doind {vr}{\code{#2}}% Make entry in variables index
+\dovarind#2 \relax% Make entry in variables index
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
\interlinepenalty=10000
\endgraf\penalty 10000\vskip -\parskip\penalty 10000
\endgroup}
+\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
% @deftypevr {Global Flag} int enable
\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
+\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
\interlinepenalty=10000
\endgraf\penalty 10000\vskip -\parskip\penalty 10000
\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+
\message{cross reference,}
% Define cross-reference macros
\newwrite \auxfile
\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
+% @inforef is simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+ node \samp{\ignorespaces#1{}}}
+
% \setref{foo} defines a cross-reference point named foo.
\def\setref#1{%
% Use \turnoffactive so that punctuation chars such as underscore
% work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat%
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive
\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
\next}}
#2% Output the suffix in any case.
}
-% Read the last existing aux file, if any. No error if none exists.
-
% This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{
-{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
+\def\xrdef #1#2{{%
+ \catcode`\'=\other
+ \expandafter\gdef\csname X#1\endcsname{#2}%
+}}
-\def\readauxfile{%
-\begingroup
-\catcode `\^^@=\other
-\catcode `\\ 1=\other
-\catcode `\\ 2=\other
-\catcode `\^^C=\other
-\catcode `\^^D=\other
-\catcode `\^^E=\other
-\catcode `\^^F=\other
-\catcode `\^^G=\other
-\catcode `\^^H=\other
-\catcode `\\v=\other
-\catcode `\^^L=\other
-\catcode `\\ e=\other
-\catcode `\\ f=\other
-\catcode `\\10=\other
-\catcode `\\11=\other
-\catcode `\\12=\other
-\catcode `\\13=\other
-\catcode `\\14=\other
-\catcode `\\15=\other
-\catcode `\\16=\other
-\catcode `\\17=\other
-\catcode `\\18=\other
-\catcode `\\19=\other
-\catcode 26=\other
-\catcode `\^^[=\other
-\catcode `\^^\=\other
-\catcode `\^^]=\other
-\catcode `\^^^=\other
-\catcode `\^^_=\other
-\catcode `\@=\other
-\catcode `\^=\other
-\catcode `\~=\other
-\catcode `\[=\other
-\catcode `\]=\other
-\catcode`\"=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode `\$=\other
-\catcode `\#=\other
-\catcode `\&=\other
-% `\+ does not work, so use 43.
-\catcode 43=\other
-% Make the characters 128-255 be printing characters
-{%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
+% Read the last existing aux file, if any. No error if none exists.
+\def\readauxfile{\begingroup
+ \catcode`\^^@=\other
+ \catcode`\\ 1=\other
+ \catcode`\\ 2=\other
+ \catcode`\^^C=\other
+ \catcode`\^^D=\other
+ \catcode`\^^E=\other
+ \catcode`\^^F=\other
+ \catcode`\^^G=\other
+ \catcode`\^^H=\other
+ \catcode`\\v=\other
+ \catcode`\^^L=\other
+ \catcode`\\ e=\other
+ \catcode`\\ f=\other
+ \catcode`\\10=\other
+ \catcode`\\11=\other
+ \catcode`\\12=\other
+ \catcode`\\13=\other
+ \catcode`\\14=\other
+ \catcode`\\15=\other
+ \catcode`\\16=\other
+ \catcode`\\17=\other
+ \catcode`\\18=\other
+ \catcode`\\19=\other
+ \catcode26=\other
+ \catcode`\^^[=\other
+ \catcode`\^^\=\other
+ \catcode`\^^]=\other
+ \catcode`\^^^=\other
+ \catcode`\^^_=\other
+ \catcode`\@=\other
+ \catcode`\^=\other
+ % It was suggested to define this as 7, which would allow ^^e4 etc.
+ % in xref tags, i.e., node names. But since ^^e4 notation isn't
+ % supported in the main text, it doesn't seem desirable. Furthermore,
+ % that is not enough: for node names that actually contain a ^
+ % character, we would end up writing a line like this: 'xrdef {'hat
+ % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+ % argument, and \hat is not an expandable control sequence. It could
+ % all be worked out, but why? Either we support ^^ or we don't.
+ %
+ % The other change necessary for this was to define \auxhat:
+ % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+ % and then to call \auxhat in \setq.
+ %
+ \catcode`\~=\other
+ \catcode`\[=\other
+ \catcode`\]=\other
+ \catcode`\"=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\$=\other
+ \catcode`\#=\other
+ \catcode`\&=\other
+ % `\+ does not work, so use 43.
+ \catcode43=\other
+ % Make the characters 128-255 be printing characters
+ {%
+ \count 1=128
+ \def\loop{%
+ \catcode\count 1=\other
+ \advance\count 1 by 1
+ \ifnum \count 1<256 \loop \fi
+ }%
}%
-}%
-% the aux file uses ' as the escape.
-% Turn off \ as an escape so we do not lose on
-% entries which were dumped with control sequences in their names.
-% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
-% Reference to such entries still does not work the way one would wish,
-% but at least they do not bomb out when the aux file is read in.
-\catcode `\{=1 \catcode `\}=2
-\catcode `\%=\other
-\catcode `\'=0
-\catcode`\^=7 % to make ^^e4 etc usable in xref tags
-\catcode `\\=\other
-\openin 1 \jobname.aux
-\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
-\global\warnedobstrue
-\fi
-% Open the new aux file. Tex will close it automatically at exit.
-\openout \auxfile=\jobname.aux
+ % The aux file uses ' as the escape (for now).
+ % Turn off \ as an escape so we do not lose on
+ % entries which were dumped with control sequences in their names.
+ % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
+ % Reference to such entries still does not work the way one would wish,
+ % but at least they do not bomb out when the aux file is read in.
+ \catcode`\{=1
+ \catcode`\}=2
+ \catcode`\%=\other
+ \catcode`\'=0
+ \catcode`\\=\other
+ %
+ \openin 1 \jobname.aux
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.aux
+ \global\havexrefstrue
+ \global\warnedobstrue
+ \fi
+ % Open the new aux file. TeX will close it automatically at exit.
+ \openout\auxfile=\jobname.aux
\endgroup}
% Don't bother with the trickery in plain.tex to not require the
% footnote text as a parameter. Our footnotes don't need to be so general.
%
-\long\gdef\footnotezzz#1{\insert\footins{%
+% Oh yes, they do; otherwise, @ifset and anything else that uses
+% \parseargline fail inside footnotes because the tokens are fixed when
+% the footnote is read. --karl, 16nov96.
+%
+\long\gdef\footnotezzz{\insert\footins\bgroup
% We want to typeset this text as a normal paragraph, even if the
% footnote reference occurs in (for example) a display environment.
% So reset some parameters.
% expands into a box, it must come within the paragraph, lest it
% provide a place where TeX can split the footnote.
\footstrut
- #1\strut}%
+ \futurelet\next\fo@t
}
+\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
+ \else\let\next\f@t\fi \next}
+\def\f@@t{\bgroup\aftergroup\@foot\let\next}
+\def\f@t#1{#1\@foot}
+\def\@foot{\strut\egroup}
}%end \catcode `\@=11
% Set some numeric style parameters, for 8.5 x 11 format.
-%\hsize = 6.5in
+\hsize = 6in
+\hoffset = .25in
\newdimen\defaultparindent \defaultparindent = 15pt
\parindent = \defaultparindent
-\parskip 18pt plus 1pt
-\setleading{15pt}
+\parskip 3pt plus 2pt minus 1pt
+\setleading{13.2pt}
\advance\topskip by 1.2cm
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
% Prevent underfull vbox error messages.
\vbadness=10000
% Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25)
\def\smallbook{
-
-% These values for secheadingskip and subsecheadingskip are
-% experiments. RJC 7 Aug 1992
-\global\secheadingskip = 17pt plus 6pt minus 3pt
-\global\subsecheadingskip = 14pt plus 6pt minus 3pt
-
-\global\lispnarrowing = 0.3in
-\setleading{12pt}
-\advance\topskip by -1cm
-\global\parskip 3pt plus 1pt
-\global\hsize = 5in
-\global\vsize=7.5in
-\global\tolerance=700
-\global\hfuzz=1pt
-\global\contentsrightmargin=0pt
-\global\deftypemargin=0pt
-\global\defbodyindent=.5cm
-
-\global\pagewidth=\hsize
-\global\pageheight=\vsize
-
-\global\let\smalllisp=\smalllispx
-\global\let\smallexample=\smalllispx
-\global\def\Esmallexample{\Esmalllisp}
+ \global\chapheadingskip = 15pt plus 4pt minus 2pt
+ \global\secheadingskip = 12pt plus 3pt minus 2pt
+ \global\subsecheadingskip = 9pt plus 2pt minus 2pt
+ %
+ \global\lispnarrowing = 0.3in
+ \setleading{12pt}
+ \advance\topskip by -1cm
+ \global\parskip 2pt plus 1pt
+ \global\hsize = 5in
+ \global\vsize=7.5in
+ \global\tolerance=700
+ \global\hfuzz=1pt
+ \global\contentsrightmargin=0pt
+ \global\deftypemargin=0pt
+ \global\defbodyindent=.5cm
+ %
+ \global\pagewidth=\hsize
+ \global\pageheight=\vsize
+ %
+ \global\let\smalllisp=\smalllispx
+ \global\let\smallexample=\smalllispx
+ \global\def\Esmallexample{\Esmalllisp}
}
% Use @afourpaper to print on European A4 paper.
\global\pageheight=\vsize
}
+\bindingoffset=0pt
+\normaloffset=\hoffset
+\pagewidth=\hsize
+\pageheight=\vsize
+
% Allow control of the text dimensions. Parameters in order: textheight;
% textwidth; voffset; hoffset; binding offset; topskip.
% All require a dimension;
\def~{{\tt \char '176}}
\chardef\hat=`\^
\catcode`\^=\active
-\def\auxhat{\def^{'hat}}
\def^{{\tt \hat}}
\catcode`\_=\active
OSDN Git Service
