/* C-compiler utilities for types and variables storage layout
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1996, 1998,
- 1999, 2000 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+02111-1307, USA. */
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "tree.h"
#include "rtl.h"
#include "tm_p.h"
#include "expr.h"
#include "toplev.h"
#include "ggc.h"
+#include "target.h"
+#include "langhooks.h"
/* Set to one when set_sizetype has been called. */
static int sizetype_set;
The value is measured in bits. */
unsigned int maximum_field_alignment;
-/* If non-zero, the alignment of a bitstring or (power-)set value, in bits.
+/* If nonzero, the alignment of a bitstring or (power-)set value, in bits.
May be overridden by front-ends. */
unsigned int set_alignment = 0;
+/* Nonzero if all REFERENCE_TYPEs are internal and hence should be
+ allocated in Pmode, not ptr_mode. Set only by internal_reference_types
+ called only by a front end. */
+static int reference_types_internal = 0;
+
static void finalize_record_size PARAMS ((record_layout_info));
static void finalize_type_size PARAMS ((tree));
static void place_union_field PARAMS ((record_layout_info, tree));
+#if defined (PCC_BITFIELD_TYPE_MATTERS) || defined (BITFIELD_NBYTES_LIMITED)
+static int excess_unit_span PARAMS ((HOST_WIDE_INT, HOST_WIDE_INT,
+ HOST_WIDE_INT, HOST_WIDE_INT,
+ tree));
+#endif
+static unsigned int update_alignment_for_field
+ PARAMS ((record_layout_info, tree,
+ unsigned int));
extern void debug_rli PARAMS ((record_layout_info));
\f
/* SAVE_EXPRs for sizes of types and decls, waiting to be expanded. */
-static tree pending_sizes;
+static GTY(()) tree pending_sizes;
/* Nonzero means cannot safely call expand_expr now,
so put variable sizes onto `pending_sizes' instead. */
int immediate_size_expand;
+/* Show that REFERENCE_TYPES are internal and should be Pmode. Called only
+ by front end. */
+
+void
+internal_reference_types ()
+{
+ reference_types_internal = 1;
+}
+
/* Get a list of all the objects put on the pending sizes list. */
tree
return chain;
}
+/* Return nonzero if EXPR is present on the pending sizes list. */
+
+int
+is_pending_size (expr)
+ tree expr;
+{
+ tree t;
+
+ for (t = pending_sizes; t; t = TREE_CHAIN (t))
+ if (TREE_VALUE (t) == expr)
+ return 1;
+ return 0;
+}
+
+/* Add EXPR to the pending sizes list. */
+
+void
+put_pending_size (expr)
+ tree expr;
+{
+ /* Strip any simple arithmetic from EXPR to see if it has an underlying
+ SAVE_EXPR. */
+ while (TREE_CODE_CLASS (TREE_CODE (expr)) == '1'
+ || (TREE_CODE_CLASS (TREE_CODE (expr)) == '2'
+ && TREE_CONSTANT (TREE_OPERAND (expr, 1))))
+ expr = TREE_OPERAND (expr, 0);
+
+ if (TREE_CODE (expr) == SAVE_EXPR)
+ pending_sizes = tree_cons (NULL_TREE, expr, pending_sizes);
+}
+
/* Put a chain of objects into the pending sizes list, which must be
empty. */
{
/* If the language-processor is to take responsibility for variable-sized
items (e.g., languages which have elaboration procedures like Ada),
- just return SIZE unchanged. Likewise for self-referential sizes. */
+ just return SIZE unchanged. Likewise for self-referential sizes and
+ constant sizes. */
if (TREE_CONSTANT (size)
- || global_bindings_p () < 0 || contains_placeholder_p (size))
+ || (*lang_hooks.decls.global_bindings_p) () < 0
+ || contains_placeholder_p (size))
return size;
size = save_expr (size);
if (TREE_CODE (size) == SAVE_EXPR)
SAVE_EXPR_PERSISTENT_P (size) = 1;
- if (global_bindings_p ())
+ if ((*lang_hooks.decls.global_bindings_p) ())
{
if (TREE_CONSTANT (size))
error ("type size can't be explicitly evaluated");
}
if (immediate_size_expand)
- /* NULL_RTX is not defined; neither is the rtx type.
+ /* NULL_RTX is not defined; neither is the rtx type.
Also, we would like to pass const0_rtx here, but don't have it. */
- expand_expr (size, expand_expr (integer_zero_node, NULL_PTR, VOIDmode, 0),
+ expand_expr (size, expand_expr (integer_zero_node, NULL_RTX, VOIDmode, 0),
VOIDmode, 0);
else if (cfun != 0 && cfun->x_dont_save_pending_sizes_p)
/* The front-end doesn't want us to keep a list of the expressions
that determine sizes for variable size objects. */
;
else
- pending_sizes = tree_cons (NULL_TREE, size, pending_sizes);
+ put_pending_size (size);
return size;
}
enum mode_class class;
int limit;
{
- register enum machine_mode mode;
+ enum machine_mode mode;
if (limit && size > MAX_FIXED_MODE_SIZE)
return BLKmode;
unsigned int size;
enum mode_class class;
{
- register enum machine_mode mode;
+ enum machine_mode mode;
/* Get the first mode which has at least this size, in the
specified class. */
case MODE_COMPLEX_INT:
case MODE_COMPLEX_FLOAT:
case MODE_FLOAT:
+ case MODE_VECTOR_INT:
+ case MODE_VECTOR_FLOAT:
mode = mode_for_size (GET_MODE_BITSIZE (mode), MODE_INT, 0);
break;
case MODE_RANDOM:
if (mode == BLKmode)
- break;
+ break;
- /* ... fall through ... */
+ /* ... fall through ... */
case MODE_CC:
default:
return mode;
}
+/* Return the alignment of MODE. This will be bounded by 1 and
+ BIGGEST_ALIGNMENT. */
+
+unsigned int
+get_mode_alignment (mode)
+ enum machine_mode mode;
+{
+ unsigned int alignment;
+
+ if (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT
+ || GET_MODE_CLASS (mode) == MODE_COMPLEX_INT)
+ alignment = GET_MODE_UNIT_SIZE (mode);
+ else
+ alignment = GET_MODE_SIZE (mode);
+
+ /* Extract the LSB of the size. */
+ alignment = alignment & -alignment;
+ alignment *= BITS_PER_UNIT;
+
+ alignment = MIN (BIGGEST_ALIGNMENT, MAX (1, alignment));
+ return alignment;
+}
+
/* Return the value of VALUE, rounded up to a multiple of DIVISOR.
This can only be applied to objects of a sizetype. */
tree decl;
unsigned int known_align;
{
- register tree type = TREE_TYPE (decl);
- register enum tree_code code = TREE_CODE (decl);
+ tree type = TREE_TYPE (decl);
+ enum tree_code code = TREE_CODE (decl);
if (code == CONST_DECL)
return;
&& (DECL_ALIGN (decl) == 0
|| (! (code == FIELD_DECL && DECL_PACKED (decl))
&& TYPE_ALIGN (type) > DECL_ALIGN (decl))))
- DECL_ALIGN (decl) = TYPE_ALIGN (type);
+ {
+ DECL_ALIGN (decl) = TYPE_ALIGN (type);
+ DECL_USER_ALIGN (decl) = 0;
+ }
/* For fields, set the bit field type and update the alignment. */
if (code == FIELD_DECL)
DECL_BIT_FIELD_TYPE (decl) = DECL_BIT_FIELD (decl) ? type : 0;
if (maximum_field_alignment != 0)
DECL_ALIGN (decl) = MIN (DECL_ALIGN (decl), maximum_field_alignment);
- else if (DECL_PACKED (decl))
- DECL_ALIGN (decl) = MIN (DECL_ALIGN (decl), BITS_PER_UNIT);
+
+ /* If the field is of variable size, we can't misalign it since we
+ have no way to make a temporary to align the result. But this
+ isn't an issue if the decl is not addressable. Likewise if it
+ is of unknown size. */
+ else if (DECL_PACKED (decl)
+ && (DECL_NONADDRESSABLE_P (decl)
+ || DECL_SIZE_UNIT (decl) == 0
+ || TREE_CODE (DECL_SIZE_UNIT (decl)) == INTEGER_CST))
+ {
+ DECL_ALIGN (decl) = MIN (DECL_ALIGN (decl), BITS_PER_UNIT);
+ DECL_USER_ALIGN (decl) = 0;
+ }
}
- /* See if we can use an ordinary integer mode for a bit-field.
+ /* See if we can use an ordinary integer mode for a bit-field.
Conditions are: a fixed size that is correct for another mode
and occupying a complete byte or bytes on proper boundary. */
if (code == FIELD_DECL && DECL_BIT_FIELD (decl)
&& TREE_CODE (TYPE_SIZE (type)) == INTEGER_CST
&& GET_MODE_CLASS (TYPE_MODE (type)) == MODE_INT)
{
- register enum machine_mode xmode
+ enum machine_mode xmode
= mode_for_size_tree (DECL_SIZE (decl), MODE_INT, 1);
if (xmode != BLKmode && known_align >= GET_MODE_ALIGNMENT (xmode))
}
}
\f
+/* Hook for a front-end function that can modify the record layout as needed
+ immediately before it is finalized. */
+
+void (*lang_adjust_rli) PARAMS ((record_layout_info)) = 0;
+
+void
+set_lang_adjust_rli (f)
+ void (*f) PARAMS ((record_layout_info));
+{
+ lang_adjust_rli = f;
+}
+
/* Begin laying out type T, which may be a RECORD_TYPE, UNION_TYPE, or
QUAL_UNION_TYPE. Return a pointer to a struct record_layout_info which
is to be passed to all other layout functions for this record. It is the
- responsibility of the caller to call `free' for the storage returned.
+ responsibility of the caller to call `free' for the storage returned.
Note that garbage collection is not permitted until we finish laying
out the record. */
start_record_layout (t)
tree t;
{
- record_layout_info rli
- = (record_layout_info) xmalloc (sizeof (struct record_layout_info));
+ record_layout_info rli
+ = (record_layout_info) xmalloc (sizeof (struct record_layout_info_s));
rli->t = t;
declaration, for example) use it -- otherwise, start with a
one-byte alignment. */
rli->record_align = MAX (BITS_PER_UNIT, TYPE_ALIGN (t));
- rli->unpacked_align = rli->record_align;
+ rli->unpacked_align = rli->unpadded_align = rli->record_align;
rli->offset_align = MAX (rli->record_align, BIGGEST_ALIGNMENT);
#ifdef STRUCTURE_SIZE_BOUNDARY
/* Packed structures don't need to have minimum size. */
if (! TYPE_PACKED (t))
- rli->record_align = MAX (rli->record_align, STRUCTURE_SIZE_BOUNDARY);
+ rli->record_align = MAX (rli->record_align, (unsigned) STRUCTURE_SIZE_BOUNDARY);
#endif
rli->offset = size_zero_node;
rli->bitpos = bitsize_zero_node;
+ rli->prev_field = 0;
rli->pending_statics = 0;
rli->packed_maybe_necessary = 0;
}
void
-pos_from_byte (poffset, pbitpos, off_align, pos)
- tree *poffset, *pbitpos;
- unsigned int off_align;
- tree pos;
-{
- *poffset
- = size_binop (MULT_EXPR,
- convert (sizetype,
- size_binop (FLOOR_DIV_EXPR, pos,
- bitsize_int (off_align
- / BITS_PER_UNIT))),
- size_int (off_align / BITS_PER_UNIT));
- *pbitpos = size_binop (MULT_EXPR,
- size_binop (FLOOR_MOD_EXPR, pos,
- bitsize_int (off_align / BITS_PER_UNIT)),
- bitsize_unit_node);
-}
-
-void
pos_from_bit (poffset, pbitpos, off_align, pos)
tree *poffset, *pbitpos;
unsigned int off_align;
= size_binop (PLUS_EXPR, *poffset,
size_binop (MULT_EXPR, convert (sizetype, extra_aligns),
size_int (off_align / BITS_PER_UNIT)));
-
+
*pbitpos
= size_binop (FLOOR_MOD_EXPR, *pbitpos, bitsize_int (off_align));
}
print_node_brief (stderr, "\noffset", rli->offset, 0);
print_node_brief (stderr, " bitpos", rli->bitpos, 0);
- fprintf (stderr, "\nrec_align = %u, unpack_align = %u, off_align = %u\n",
- rli->record_align, rli->unpacked_align, rli->offset_align);
+ fprintf (stderr, "\naligns: rec = %u, unpack = %u, unpad = %u, off = %u\n",
+ rli->record_align, rli->unpacked_align, rli->unpadded_align,
+ rli->offset_align);
if (rli->packed_maybe_necessary)
fprintf (stderr, "packed may be necessary\n");
return bit_from_pos (rli->offset, rli->bitpos);
}
+/* FIELD is about to be added to RLI->T. The alignment (in bits) of
+ the next available location is given by KNOWN_ALIGN. Update the
+ variable alignment fields in RLI, and return the alignment to give
+ the FIELD. */
+
+static unsigned int
+update_alignment_for_field (rli, field, known_align)
+ record_layout_info rli;
+ tree field;
+ unsigned int known_align;
+{
+ /* The alignment required for FIELD. */
+ unsigned int desired_align;
+ /* The type of this field. */
+ tree type = TREE_TYPE (field);
+ /* True if the field was explicitly aligned by the user. */
+ bool user_align;
+
+ /* Lay out the field so we know what alignment it needs. For a
+ packed field, use the alignment as specified, disregarding what
+ the type would want. */
+ desired_align = DECL_ALIGN (field);
+ user_align = DECL_USER_ALIGN (field);
+ layout_decl (field, known_align);
+ if (! DECL_PACKED (field))
+ {
+ desired_align = DECL_ALIGN (field);
+ user_align = DECL_USER_ALIGN (field);
+ }
+
+ /* Some targets (i.e. i386, VMS) limit struct field alignment
+ to a lower boundary than alignment of variables unless
+ it was overridden by attribute aligned. */
+#ifdef BIGGEST_FIELD_ALIGNMENT
+ if (!user_align)
+ desired_align
+ = MIN (desired_align, (unsigned) BIGGEST_FIELD_ALIGNMENT);
+#endif
+
+#ifdef ADJUST_FIELD_ALIGN
+ if (!user_align)
+ desired_align = ADJUST_FIELD_ALIGN (field, desired_align);
+#endif
+
+ /* Record must have at least as much alignment as any field.
+ Otherwise, the alignment of the field within the record is
+ meaningless. */
+ if ((* targetm.ms_bitfield_layout_p) (rli->t)
+ && type != error_mark_node
+ && DECL_BIT_FIELD_TYPE (field)
+ && ! integer_zerop (TYPE_SIZE (type)))
+ {
+ /* Here, the alignment of the underlying type of a bitfield can
+ affect the alignment of a record; even a zero-sized field
+ can do this. The alignment should be to the alignment of
+ the type, except that for zero-size bitfields this only
+ applies if there was an immediately prior, nonzero-size
+ bitfield. (That's the way it is, experimentally.) */
+ if (! integer_zerop (DECL_SIZE (field))
+ ? ! DECL_PACKED (field)
+ : (rli->prev_field
+ && DECL_BIT_FIELD_TYPE (rli->prev_field)
+ && ! integer_zerop (DECL_SIZE (rli->prev_field))))
+ {
+ unsigned int type_align = TYPE_ALIGN (type);
+ type_align = MAX (type_align, desired_align);
+ if (maximum_field_alignment != 0)
+ type_align = MIN (type_align, maximum_field_alignment);
+ rli->record_align = MAX (rli->record_align, type_align);
+ rli->unpacked_align = MAX (rli->unpacked_align, TYPE_ALIGN (type));
+ rli->unpadded_align = MAX (rli->unpadded_align, DECL_ALIGN (field));
+ }
+ else
+ desired_align = 1;
+ }
+ else
+#ifdef PCC_BITFIELD_TYPE_MATTERS
+ if (PCC_BITFIELD_TYPE_MATTERS && type != error_mark_node
+ && ! (* targetm.ms_bitfield_layout_p) (rli->t)
+ && DECL_BIT_FIELD_TYPE (field)
+ && ! integer_zerop (TYPE_SIZE (type)))
+ {
+ /* A zero-length bit-field affects the alignment of the next
+ field. */
+ if (!DECL_PACKED (field) && integer_zerop (DECL_SIZE (field)))
+ {
+ desired_align = TYPE_ALIGN (type);
+#ifdef ADJUST_FIELD_ALIGN
+ desired_align = ADJUST_FIELD_ALIGN (field, desired_align);
+#endif
+ }
+
+ /* Named bit-fields cause the entire structure to have the
+ alignment implied by their type. */
+ if (DECL_NAME (field) != 0)
+ {
+ unsigned int type_align = TYPE_ALIGN (type);
+
+#ifdef ADJUST_FIELD_ALIGN
+ if (! TYPE_USER_ALIGN (type))
+ type_align = ADJUST_FIELD_ALIGN (field, type_align);
+#endif
+
+ if (maximum_field_alignment != 0)
+ type_align = MIN (type_align, maximum_field_alignment);
+ else if (DECL_PACKED (field))
+ type_align = MIN (type_align, BITS_PER_UNIT);
+
+ /* The alignment of the record is increased to the maximum
+ of the current alignment, the alignment indicated on the
+ field (i.e., the alignment specified by an __aligned__
+ attribute), and the alignment indicated by the type of
+ the field. */
+ rli->record_align = MAX (rli->record_align, desired_align);
+ rli->record_align = MAX (rli->record_align, type_align);
+
+ rli->unpadded_align = MAX (rli->unpadded_align, DECL_ALIGN (field));
+ if (warn_packed)
+ rli->unpacked_align = MAX (rli->unpacked_align, TYPE_ALIGN (type));
+ user_align |= TYPE_USER_ALIGN (type);
+ }
+ }
+ else
+#endif
+ {
+ rli->record_align = MAX (rli->record_align, desired_align);
+ rli->unpacked_align = MAX (rli->unpacked_align, TYPE_ALIGN (type));
+ rli->unpadded_align = MAX (rli->unpadded_align, DECL_ALIGN (field));
+ }
+
+ TYPE_USER_ALIGN (rli->t) |= user_align;
+
+ return desired_align;
+}
+
/* Called from place_field to handle unions. */
static void
record_layout_info rli;
tree field;
{
- layout_decl (field, 0);
-
+ update_alignment_for_field (rli, field, /*known_align=*/0);
+
DECL_FIELD_OFFSET (field) = size_zero_node;
DECL_FIELD_BIT_OFFSET (field) = bitsize_zero_node;
- DECL_OFFSET_ALIGN (field) = BIGGEST_ALIGNMENT;
-
- /* Union must be at least as aligned as any field requires. */
- rli->record_align = MAX (rli->record_align, DECL_ALIGN (field));
-
-#ifdef PCC_BITFIELD_TYPE_MATTERS
- /* On the m88000, a bit field of declare type `int' forces the
- entire union to have `int' alignment. */
- if (PCC_BITFIELD_TYPE_MATTERS && DECL_BIT_FIELD_TYPE (field))
- rli->record_align = MAX (rli->record_align,
- TYPE_ALIGN (TREE_TYPE (field)));
-#endif
+ SET_DECL_OFFSET_ALIGN (field, BIGGEST_ALIGNMENT);
/* We assume the union's size will be a multiple of a byte so we don't
bother with BITPOS. */
if (TREE_CODE (rli->t) == UNION_TYPE)
rli->offset = size_binop (MAX_EXPR, rli->offset, DECL_SIZE_UNIT (field));
else if (TREE_CODE (rli->t) == QUAL_UNION_TYPE)
- rli->offset = fold (build (COND_EXPR, sizetype,
+ rli->offset = fold (build (COND_EXPR, sizetype,
DECL_QUALIFIER (field),
DECL_SIZE_UNIT (field), rli->offset));
}
+#if defined (PCC_BITFIELD_TYPE_MATTERS) || defined (BITFIELD_NBYTES_LIMITED)
+/* A bitfield of SIZE with a required access alignment of ALIGN is allocated
+ at BYTE_OFFSET / BIT_OFFSET. Return nonzero if the field would span more
+ units of alignment than the underlying TYPE. */
+static int
+excess_unit_span (byte_offset, bit_offset, size, align, type)
+ HOST_WIDE_INT byte_offset, bit_offset, size, align;
+ tree type;
+{
+ /* Note that the calculation of OFFSET might overflow; we calculate it so
+ that we still get the right result as long as ALIGN is a power of two. */
+ unsigned HOST_WIDE_INT offset = byte_offset * BITS_PER_UNIT + bit_offset;
+
+ offset = offset % align;
+ return ((offset + size + align - 1) / align
+ > ((unsigned HOST_WIDE_INT) tree_low_cst (TYPE_SIZE (type), 1)
+ / align));
+}
+#endif
+
/* RLI contains information about the layout of a RECORD_TYPE. FIELD
is a FIELD_DECL to be added after those fields already present in
T. (FIELD is not actually added to the TYPE_FIELDS list here;
unsigned int actual_align;
/* The type of this field. */
tree type = TREE_TYPE (field);
-
+
+ if (TREE_CODE (field) == ERROR_MARK || TREE_CODE (type) == ERROR_MARK)
+ return;
+
/* If FIELD is static, then treat it like a separate variable, not
really like a structure field. If it is a FUNCTION_DECL, it's a
method. In both cases, all we do is lay out the decl, and we do
& - tree_low_cst (rli->offset, 1)));
else
known_align = rli->offset_align;
-
- /* Lay out the field so we know what alignment it needs. For a
- packed field, use the alignment as specified, disregarding what
- the type would want. */
- desired_align = DECL_ALIGN (field);
- layout_decl (field, known_align);
- if (! DECL_PACKED (field))
- desired_align = DECL_ALIGN (field);
-
- /* Some targets (i.e. VMS) limit struct field alignment
- to a lower boundary than alignment of variables. */
-#ifdef BIGGEST_FIELD_ALIGNMENT
- desired_align = MIN (desired_align, BIGGEST_FIELD_ALIGNMENT);
-#endif
-#ifdef ADJUST_FIELD_ALIGN
- desired_align = ADJUST_FIELD_ALIGN (field, desired_align);
-#endif
-
- /* Record must have at least as much alignment as any field.
- Otherwise, the alignment of the field within the record is
- meaningless. */
-#ifdef PCC_BITFIELD_TYPE_MATTERS
- if (PCC_BITFIELD_TYPE_MATTERS && type != error_mark_node
- && DECL_BIT_FIELD_TYPE (field)
- && ! integer_zerop (TYPE_SIZE (type)))
- {
- /* For these machines, a zero-length field does not
- affect the alignment of the structure as a whole.
- It does, however, affect the alignment of the next field
- within the structure. */
- if (! integer_zerop (DECL_SIZE (field)))
- rli->record_align = MAX (rli->record_align, desired_align);
- else if (! DECL_PACKED (field))
- desired_align = TYPE_ALIGN (type);
-
- /* A named bit field of declared type `int'
- forces the entire structure to have `int' alignment. */
- if (DECL_NAME (field) != 0)
- {
- unsigned int type_align = TYPE_ALIGN (type);
-
- if (maximum_field_alignment != 0)
- type_align = MIN (type_align, maximum_field_alignment);
- else if (DECL_PACKED (field))
- type_align = MIN (type_align, BITS_PER_UNIT);
-
- rli->record_align = MAX (rli->record_align, type_align);
- if (warn_packed)
- rli->unpacked_align = MAX (rli->unpacked_align,
- TYPE_ALIGN (type));
- }
- }
- else
-#endif
- {
- rli->record_align = MAX (rli->record_align, desired_align);
- rli->unpacked_align = MAX (rli->unpacked_align, TYPE_ALIGN (type));
- }
+
+ desired_align = update_alignment_for_field (rli, field, known_align);
if (warn_packed && DECL_PACKED (field))
{
variable-sized fields, we need not worry about compatibility. */
#ifdef PCC_BITFIELD_TYPE_MATTERS
if (PCC_BITFIELD_TYPE_MATTERS
+ && ! (* targetm.ms_bitfield_layout_p) (rli->t)
&& TREE_CODE (field) == FIELD_DECL
&& type != error_mark_node
&& DECL_BIT_FIELD (field)
HOST_WIDE_INT offset = tree_low_cst (rli->offset, 0);
HOST_WIDE_INT bit_offset = tree_low_cst (rli->bitpos, 0);
+#ifdef ADJUST_FIELD_ALIGN
+ if (! TYPE_USER_ALIGN (type))
+ type_align = ADJUST_FIELD_ALIGN (field, type_align);
+#endif
+
/* A bit field may not span more units of alignment of its type
than its type itself. Advance to next boundary if necessary. */
- if ((((offset * BITS_PER_UNIT + bit_offset + field_size +
- type_align - 1)
- / type_align)
- - (offset * BITS_PER_UNIT + bit_offset) / type_align)
- > tree_low_cst (TYPE_SIZE (type), 1) / type_align)
+ if (excess_unit_span (offset, bit_offset, field_size, type_align, type))
rli->bitpos = round_up (rli->bitpos, type_align);
+
+ TYPE_USER_ALIGN (rli->t) |= TYPE_USER_ALIGN (type);
}
#endif
#ifdef BITFIELD_NBYTES_LIMITED
if (BITFIELD_NBYTES_LIMITED
+ && ! (* targetm.ms_bitfield_layout_p) (rli->t)
&& TREE_CODE (field) == FIELD_DECL
&& type != error_mark_node
&& DECL_BIT_FIELD_TYPE (field)
&& ! DECL_PACKED (field)
&& ! integer_zerop (DECL_SIZE (field))
&& host_integerp (DECL_SIZE (field), 1)
- && host_integerp (rli->size, 1)
+ && host_integerp (rli->offset, 1)
&& host_integerp (TYPE_SIZE (type), 1))
{
unsigned int type_align = TYPE_ALIGN (type);
HOST_WIDE_INT offset = tree_low_cst (rli->offset, 0);
HOST_WIDE_INT bit_offset = tree_low_cst (rli->bitpos, 0);
+#ifdef ADJUST_FIELD_ALIGN
+ if (! TYPE_USER_ALIGN (type))
+ type_align = ADJUST_FIELD_ALIGN (field, type_align);
+#endif
+
if (maximum_field_alignment != 0)
type_align = MIN (type_align, maximum_field_alignment);
/* ??? This test is opposite the test in the containing if
/* A bit field may not span the unit of alignment of its type.
Advance to next boundary if necessary. */
- /* ??? This code should match the code above for the
- PCC_BITFIELD_TYPE_MATTERS case. */
- if ((offset * BITS_PER_UNIT + bit_offset) / type_align
- != ((offset * BITS_PER_UNIT + bit_offset + field_size - 1)
- / type_align))
+ if (excess_unit_span (offset, bit_offset, field_size, type_align, type))
rli->bitpos = round_up (rli->bitpos, type_align);
+
+ TYPE_USER_ALIGN (rli->t) |= TYPE_USER_ALIGN (type);
}
#endif
+ /* See the docs for TARGET_MS_BITFIELD_LAYOUT_P for details.
+ A subtlety:
+ When a bit field is inserted into a packed record, the whole
+ size of the underlying type is used by one or more same-size
+ adjacent bitfields. (That is, if its long:3, 32 bits is
+ used in the record, and any additional adjacent long bitfields are
+ packed into the same chunk of 32 bits. However, if the size
+ changes, a new field of that size is allocated.) In an unpacked
+ record, this is the same as using alignment, but not equivalent
+ when packing.
+
+ Note: for compatibility, we use the type size, not the type alignment
+ to determine alignment, since that matches the documentation */
+
+ if ((* targetm.ms_bitfield_layout_p) (rli->t)
+ && ((DECL_BIT_FIELD_TYPE (field) && ! DECL_PACKED (field))
+ || (rli->prev_field && ! DECL_PACKED (rli->prev_field))))
+ {
+ /* At this point, either the prior or current are bitfields,
+ (possibly both), and we're dealing with MS packing. */
+ tree prev_saved = rli->prev_field;
+
+ /* Is the prior field a bitfield? If so, handle "runs" of same
+ type size fields. */
+ if (rli->prev_field /* necessarily a bitfield if it exists. */)
+ {
+ /* If both are bitfields, nonzero, and the same size, this is
+ the middle of a run. Zero declared size fields are special
+ and handled as "end of run". (Note: it's nonzero declared
+ size, but equal type sizes!) (Since we know that both
+ the current and previous fields are bitfields by the
+ time we check it, DECL_SIZE must be present for both.) */
+ if (DECL_BIT_FIELD_TYPE (field)
+ && !integer_zerop (DECL_SIZE (field))
+ && !integer_zerop (DECL_SIZE (rli->prev_field))
+ && simple_cst_equal (TYPE_SIZE (type),
+ TYPE_SIZE (TREE_TYPE (rli->prev_field))) )
+ {
+ /* We're in the middle of a run of equal type size fields; make
+ sure we realign if we run out of bits. (Not decl size,
+ type size!) */
+ int bitsize = TREE_INT_CST_LOW (DECL_SIZE (field));
+ tree type_size = TYPE_SIZE(TREE_TYPE(rli->prev_field));
+
+ if (rli->remaining_in_alignment < bitsize)
+ {
+ /* out of bits; bump up to next 'word'. */
+ rli->offset = DECL_FIELD_OFFSET (rli->prev_field);
+ rli->bitpos = size_binop (PLUS_EXPR,
+ type_size,
+ DECL_FIELD_BIT_OFFSET(rli->prev_field));
+ rli->prev_field = field;
+ rli->remaining_in_alignment = TREE_INT_CST_LOW (type_size);
+ }
+ rli->remaining_in_alignment -= bitsize;
+ }
+ else
+ {
+ /* End of a run: if leaving a run of bitfields of the same type
+ size, we have to "use up" the rest of the bits of the type
+ size.
+
+ Compute the new position as the sum of the size for the prior
+ type and where we first started working on that type.
+ Note: since the beginning of the field was aligned then
+ of course the end will be too. No round needed. */
+
+ if (!integer_zerop (DECL_SIZE (rli->prev_field)))
+ {
+ tree type_size = TYPE_SIZE(TREE_TYPE(rli->prev_field));
+ rli->bitpos = size_binop (PLUS_EXPR,
+ type_size,
+ DECL_FIELD_BIT_OFFSET(rli->prev_field));
+ }
+ else
+ {
+ /* We "use up" size zero fields; the code below should behave
+ as if the prior field was not a bitfield. */
+ prev_saved = NULL;
+ }
+
+ /* Cause a new bitfield to be captured, either this time (if
+ currently a bitfield) or next time we see one. */
+ if (!DECL_BIT_FIELD_TYPE(field)
+ || integer_zerop (DECL_SIZE (field)))
+ {
+ rli->prev_field = NULL;
+ }
+ }
+ normalize_rli (rli);
+ }
+
+ /* If we're starting a new run of same size type bitfields
+ (or a run of non-bitfields), set up the "first of the run"
+ fields.
+
+ That is, if the current field is not a bitfield, or if there
+ was a prior bitfield the type sizes differ, or if there wasn't
+ a prior bitfield the size of the current field is nonzero.
+
+ Note: we must be sure to test ONLY the type size if there was
+ a prior bitfield and ONLY for the current field being zero if
+ there wasn't. */
+
+ if (!DECL_BIT_FIELD_TYPE (field)
+ || ( prev_saved != NULL
+ ? !simple_cst_equal (TYPE_SIZE (type),
+ TYPE_SIZE (TREE_TYPE (prev_saved)))
+ : !integer_zerop (DECL_SIZE (field)) ))
+ {
+ unsigned int type_align = 8; /* Never below 8 for compatibility */
+
+ /* (When not a bitfield), we could be seeing a flex array (with
+ no DECL_SIZE). Since we won't be using remaining_in_alignment
+ until we see a bitfield (and come by here again) we just skip
+ calculating it. */
+
+ if (DECL_SIZE (field) != NULL)
+ rli->remaining_in_alignment
+ = TREE_INT_CST_LOW (TYPE_SIZE(TREE_TYPE(field)))
+ - TREE_INT_CST_LOW (DECL_SIZE (field));
+
+ /* Now align (conventionally) for the new type. */
+ if (!DECL_PACKED(field))
+ type_align = MAX(TYPE_ALIGN (type), type_align);
+
+ if (prev_saved
+ && DECL_BIT_FIELD_TYPE (prev_saved)
+ /* If the previous bit-field is zero-sized, we've already
+ accounted for its alignment needs (or ignored it, if
+ appropriate) while placing it. */
+ && ! integer_zerop (DECL_SIZE (prev_saved)))
+ type_align = MAX (type_align,
+ TYPE_ALIGN (TREE_TYPE (prev_saved)));
+
+ if (maximum_field_alignment != 0)
+ type_align = MIN (type_align, maximum_field_alignment);
+
+ rli->bitpos = round_up (rli->bitpos, type_align);
+ /* If we really aligned, don't allow subsequent bitfields
+ to undo that. */
+ rli->prev_field = NULL;
+ }
+ }
+
/* Offset so far becomes the position of this field after normalizing. */
normalize_rli (rli);
DECL_FIELD_OFFSET (field) = rli->offset;
DECL_FIELD_BIT_OFFSET (field) = rli->bitpos;
- DECL_OFFSET_ALIGN (field) = rli->offset_align;
+ SET_DECL_OFFSET_ALIGN (field, rli->offset_align);
/* If this field ended up more aligned than we thought it would be (we
approximate this by seeing if its position changed), lay out the field
if (known_align != actual_align)
layout_decl (field, actual_align);
+ /* Only the MS bitfields use this. */
+ if (rli->prev_field == NULL && DECL_BIT_FIELD_TYPE(field))
+ rli->prev_field = field;
+
/* Now add size of this field to the size of the record. If the size is
not constant, treat the field as being a multiple of bytes and just
adjust the offset, resetting the bit position. Otherwise, apportion the
is printed in finish_struct. */
if (DECL_SIZE (field) == 0)
/* Do nothing. */;
- else if (! TREE_CONSTANT (DECL_SIZE_UNIT (field)))
+ else if (TREE_CODE (DECL_SIZE_UNIT (field)) != INTEGER_CST
+ || TREE_CONSTANT_OVERFLOW (DECL_SIZE_UNIT (field)))
{
rli->offset
= size_binop (PLUS_EXPR, rli->offset,
/* Assuming that all the fields have been laid out, this function uses
RLI to compute the final TYPE_SIZE, TYPE_ALIGN, etc. for the type
- inidicated by RLI. */
+ indicated by RLI. */
static void
finalize_record_size (rli)
unpadded_size_unit
= size_binop (PLUS_EXPR, unpadded_size_unit, size_one_node);
- /* Record the un-rounded size in the binfo node. But first we check
- the size of TYPE_BINFO to make sure that BINFO_SIZE is available. */
- if (TYPE_BINFO (rli->t) && TREE_VEC_LENGTH (TYPE_BINFO (rli->t)) > 6)
- {
- TYPE_BINFO_SIZE (rli->t) = unpadded_size;
- TYPE_BINFO_SIZE_UNIT (rli->t) = unpadded_size_unit;
- }
-
- /* Round the size up to be a multiple of the required alignment */
+ /* Round the size up to be a multiple of the required alignment */
#ifdef ROUND_TYPE_SIZE
TYPE_SIZE (rli->t) = ROUND_TYPE_SIZE (rli->t, unpadded_size,
TYPE_ALIGN (rli->t));
TYPE_SIZE_UNIT (rli->t)
- = ROUND_TYPE_SIZE_UNIT (rli->t, unpaded_size_unit,
+ = ROUND_TYPE_SIZE_UNIT (rli->t, unpadded_size_unit,
TYPE_ALIGN (rli->t) / BITS_PER_UNIT);
#else
TYPE_SIZE (rli->t) = round_up (unpadded_size, TYPE_ALIGN (rli->t));
if (warn_padded && TREE_CONSTANT (unpadded_size)
&& simple_cst_equal (unpadded_size, TYPE_SIZE (rli->t)) == 0)
warning ("padding struct size to alignment boundary");
-
+
if (warn_packed && TREE_CODE (rli->t) == RECORD_TYPE
&& TYPE_PACKED (rli->t) && ! rli->packed_maybe_necessary
&& TREE_CONSTANT (unpadded_size))
if (TYPE_NAME (rli->t))
{
- char *name;
+ const char *name;
if (TREE_CODE (TYPE_NAME (rli->t)) == IDENTIFIER_NODE)
name = IDENTIFIER_POINTER (TYPE_NAME (rli->t));
|| (TYPE_MODE (TREE_TYPE (field)) == BLKmode
&& ! TYPE_NO_FORCE_BLK (TREE_TYPE (field)))
|| ! host_integerp (bit_position (field), 1)
+ || DECL_SIZE (field) == 0
|| ! host_integerp (DECL_SIZE (field), 1))
return;
bitpos = int_bit_position (field);
-
+
/* Must be BLKmode if any field crosses a word boundary,
since extract_bit_field can't handle that in registers. */
if (bitpos / BITS_PER_WORD
- != ((TREE_INT_CST_LOW (DECL_SIZE (field)) + bitpos - 1)
+ != ((tree_low_cst (DECL_SIZE (field), 1) + bitpos - 1)
/ BITS_PER_WORD)
/* But there is no problem if the field is entire words. */
&& tree_low_cst (DECL_SIZE (field), 1) % BITS_PER_WORD != 0)
/* If this field is the whole struct, remember its mode so
that, say, we can put a double in a class into a DF
register instead of forcing it to live in the stack. */
- if (field == TYPE_FIELDS (type) && TREE_CHAIN (field) == 0)
+ if (simple_cst_equal (TYPE_SIZE (type), DECL_SIZE (field)))
mode = DECL_MODE (field);
-#ifdef STRUCT_FORCE_BLK
+#ifdef MEMBER_TYPE_FORCES_BLK
/* With some targets, eg. c4x, it is sub-optimal
to access an aligned BLKmode structure as a scalar. */
- if (mode == VOIDmode && STRUCT_FORCE_BLK (field))
+
+ if (MEMBER_TYPE_FORCES_BLK (field, mode))
return;
-#endif /* STRUCT_FORCE_BLK */
+#endif /* MEMBER_TYPE_FORCES_BLK */
}
- if (mode != VOIDmode)
- /* We only have one real field; use its mode. */
+ /* If we only have one real field; use its mode. This only applies to
+ RECORD_TYPE. This does not apply to unions. */
+ if (TREE_CODE (type) == RECORD_TYPE && mode != VOIDmode)
TYPE_MODE (type) = mode;
else
TYPE_MODE (type) = mode_for_size_tree (TYPE_SIZE (type), MODE_INT, 1);
|| (TREE_CODE (type) != RECORD_TYPE && TREE_CODE (type) != UNION_TYPE
&& TREE_CODE (type) != QUAL_UNION_TYPE
&& TREE_CODE (type) != ARRAY_TYPE)))
- TYPE_ALIGN (type) = GET_MODE_ALIGNMENT (TYPE_MODE (type));
+ {
+ TYPE_ALIGN (type) = GET_MODE_ALIGNMENT (TYPE_MODE (type));
+ TYPE_USER_ALIGN (type) = 0;
+ }
/* Do machine-dependent extra alignment. */
#ifdef ROUND_TYPE_ALIGN
tree size = TYPE_SIZE (type);
tree size_unit = TYPE_SIZE_UNIT (type);
unsigned int align = TYPE_ALIGN (type);
+ unsigned int user_align = TYPE_USER_ALIGN (type);
enum machine_mode mode = TYPE_MODE (type);
/* Copy it into all variants. */
TYPE_SIZE (variant) = size;
TYPE_SIZE_UNIT (variant) = size_unit;
TYPE_ALIGN (variant) = align;
+ TYPE_USER_ALIGN (variant) = user_align;
TYPE_MODE (variant) = mode;
}
}
/* Do all of the work required to layout the type indicated by RLI,
once the fields have been laid out. This function will call `free'
- for RLI. */
+ for RLI, unless FREE_P is false. Passing a value other than false
+ for FREE_P is bad practice; this option only exists to support the
+ G++ 3.2 ABI. */
void
-finish_record_layout (rli)
+finish_record_layout (rli, free_p)
record_layout_info rli;
+ int free_p;
{
/* Compute the final size. */
finalize_record_size (rli);
/* Compute the TYPE_MODE for the record. */
compute_record_mode (rli->t);
+ /* Perform any last tweaks to the TYPE_SIZE, etc. */
+ finalize_type_size (rli->t);
+
/* Lay out any static members. This is done now because their type
may use the record's type. */
while (rli->pending_statics)
rli->pending_statics = TREE_CHAIN (rli->pending_statics);
}
- /* Perform any last tweaks to the TYPE_SIZE, etc. */
- finalize_type_size (rli->t);
-
/* Clean up. */
- free (rli);
+ if (free_p)
+ free (rli);
}
\f
+
+/* Finish processing a builtin RECORD_TYPE type TYPE. It's name is
+ NAME, its fields are chained in reverse on FIELDS.
+
+ If ALIGN_TYPE is non-null, it is given the same alignment as
+ ALIGN_TYPE. */
+
+void
+finish_builtin_struct (type, name, fields, align_type)
+ tree type;
+ const char *name;
+ tree fields;
+ tree align_type;
+{
+ tree tail, next;
+
+ for (tail = NULL_TREE; fields; tail = fields, fields = next)
+ {
+ DECL_FIELD_CONTEXT (fields) = type;
+ next = TREE_CHAIN (fields);
+ TREE_CHAIN (fields) = tail;
+ }
+ TYPE_FIELDS (type) = tail;
+
+ if (align_type)
+ {
+ TYPE_ALIGN (type) = TYPE_ALIGN (align_type);
+ TYPE_USER_ALIGN (type) = TYPE_USER_ALIGN (align_type);
+ }
+
+ layout_type (type);
+#if 0 /* not yet, should get fixed properly later */
+ TYPE_NAME (type) = make_type_decl (get_identifier (name), type);
+#else
+ TYPE_NAME (type) = build_decl (TYPE_DECL, get_identifier (name), type);
+#endif
+ TYPE_STUB_DECL (type) = TYPE_NAME (type);
+ layout_decl (TYPE_NAME (type), 0);
+}
+
/* Calculate the mode, size, and alignment for TYPE.
For an array type, calculate the element separation as well.
Record TYPE on the chain of permanent or temporary types
layout_type (type)
tree type;
{
- int old;
-
if (type == 0)
abort ();
if (TYPE_SIZE (type))
return;
- /* Make sure all nodes we allocate are not momentary; they must last
- past the current statement. */
- old = suspend_momentary ();
-
- /* Put all our nodes into the same obstack as the type. Also,
- make expressions saveable (this is a no-op for permanent types). */
-
- push_obstacks (TYPE_OBSTACK (type), TYPE_OBSTACK (type));
- saveable_allocation ();
-
switch (TREE_CODE (type))
{
case LANG_TYPE:
of the language-specific code. */
abort ();
- case BOOLEAN_TYPE: /* Used for Java, Pascal, and Chill. */
+ case BOOLEAN_TYPE: /* Used for Java, Pascal, and Chill. */
if (TYPE_PRECISION (type) == 0)
- TYPE_PRECISION (type) = 1; /* default to one byte/boolean. */
+ TYPE_PRECISION (type) = 1; /* default to one byte/boolean. */
- /* ... fall through ... */
+ /* ... fall through ... */
case INTEGER_TYPE:
case ENUMERAL_TYPE:
TYPE_SIZE_UNIT (type) = size_int (GET_MODE_SIZE (TYPE_MODE (type)));
break;
+ case VECTOR_TYPE:
+ {
+ tree subtype;
+
+ subtype = TREE_TYPE (type);
+ TREE_UNSIGNED (type) = TREE_UNSIGNED (subtype);
+ TYPE_SIZE (type) = bitsize_int (GET_MODE_BITSIZE (TYPE_MODE (type)));
+ TYPE_SIZE_UNIT (type) = size_int (GET_MODE_SIZE (TYPE_MODE (type)));
+ }
+ break;
+
case VOID_TYPE:
/* This is an incomplete type and so doesn't have a size. */
TYPE_ALIGN (type) = 1;
+ TYPE_USER_ALIGN (type) = 0;
TYPE_MODE (type) = VOIDmode;
break;
case OFFSET_TYPE:
TYPE_SIZE (type) = bitsize_int (POINTER_SIZE);
TYPE_SIZE_UNIT (type) = size_int (POINTER_SIZE / BITS_PER_UNIT);
- TYPE_MODE (type) = ptr_mode;
+ /* A pointer might be MODE_PARTIAL_INT,
+ but ptrdiff_t must be integral. */
+ TYPE_MODE (type) = mode_for_size (POINTER_SIZE, MODE_INT, 0);
break;
case FUNCTION_TYPE:
case POINTER_TYPE:
case REFERENCE_TYPE:
- TYPE_MODE (type) = ptr_mode;
- TYPE_SIZE (type) = bitsize_int (POINTER_SIZE);
- TYPE_SIZE_UNIT (type) = size_int (POINTER_SIZE / BITS_PER_UNIT);
- TREE_UNSIGNED (type) = 1;
- TYPE_PRECISION (type) = POINTER_SIZE;
+ {
+
+ enum machine_mode mode = ((TREE_CODE (type) == REFERENCE_TYPE
+ && reference_types_internal)
+ ? Pmode : TYPE_MODE (type));
+
+ int nbits = GET_MODE_BITSIZE (mode);
+
+ TYPE_SIZE (type) = bitsize_int (nbits);
+ TYPE_SIZE_UNIT (type) = size_int (GET_MODE_SIZE (mode));
+ TREE_UNSIGNED (type) = 1;
+ TYPE_PRECISION (type) = nbits;
+ }
break;
case ARRAY_TYPE:
{
- register tree index = TYPE_DOMAIN (type);
- register tree element = TREE_TYPE (type);
+ tree index = TYPE_DOMAIN (type);
+ tree element = TREE_TYPE (type);
build_pointer_type (element);
tree length;
tree element_size;
- /* If UB is max (lb - 1, x), remove the MAX_EXPR since the
- test for negative below covers it. */
- if (TREE_CODE (ub) == MAX_EXPR
- && TREE_CODE (TREE_OPERAND (ub, 0)) == MINUS_EXPR
- && integer_onep (TREE_OPERAND (TREE_OPERAND (ub, 0), 1))
- && operand_equal_p (TREE_OPERAND (TREE_OPERAND (ub, 0), 0),
- lb, 0))
- ub = TREE_OPERAND (ub, 1);
- else if (TREE_CODE (ub) == MAX_EXPR
- && TREE_CODE (TREE_OPERAND (ub, 1)) == MINUS_EXPR
- && integer_onep (TREE_OPERAND (TREE_OPERAND (ub, 1), 1))
- && operand_equal_p (TREE_OPERAND (TREE_OPERAND (ub, 1),
- 0),
- lb, 0))
- ub = TREE_OPERAND (ub, 0);
-
/* The initial subtraction should happen in the original type so
that (possible) negative values are handled appropriately. */
length = size_binop (PLUS_EXPR, size_one_node,
TREE_TYPE (lb),
ub, lb))));
- /* If neither bound is a constant and sizetype is signed, make
- sure the size is never negative. We should really do this
- if *either* bound is non-constant, but this is the best
- compromise between C and Ada. */
- if (! TREE_UNSIGNED (sizetype)
- && TREE_CODE (TYPE_MIN_VALUE (index)) != INTEGER_CST
- && TREE_CODE (TYPE_MAX_VALUE (index)) != INTEGER_CST)
- length = size_binop (MAX_EXPR, length, size_zero_node);
-
/* Special handling for arrays of bits (for Chill). */
element_size = TYPE_SIZE (element);
- if (TYPE_PACKED (type) && INTEGRAL_TYPE_P (element))
+ if (TYPE_PACKED (type) && INTEGRAL_TYPE_P (element)
+ && (integer_zerop (TYPE_MAX_VALUE (element))
+ || integer_onep (TYPE_MAX_VALUE (element)))
+ && host_integerp (TYPE_MIN_VALUE (element), 1))
{
HOST_WIDE_INT maxvalue
- = TREE_INT_CST_LOW (TYPE_MAX_VALUE (element));
+ = tree_low_cst (TYPE_MAX_VALUE (element), 1);
HOST_WIDE_INT minvalue
- = TREE_INT_CST_LOW (TYPE_MIN_VALUE (element));
+ = tree_low_cst (TYPE_MIN_VALUE (element), 1);
if (maxvalue - minvalue == 1
&& (maxvalue == 1 || maxvalue == 0))
#else
TYPE_ALIGN (type) = MAX (TYPE_ALIGN (element), BITS_PER_UNIT);
#endif
+ TYPE_USER_ALIGN (type) = TYPE_USER_ALIGN (element);
#ifdef ROUND_TYPE_SIZE
if (TYPE_SIZE (type) != 0)
TYPE_MODE (type) = BLKmode;
if (TYPE_SIZE (type) != 0
+#ifdef MEMBER_TYPE_FORCES_BLK
+ && ! MEMBER_TYPE_FORCES_BLK (type, VOIDmode)
+#endif
/* BLKmode elements force BLKmode aggregate;
else extract/store fields may lose. */
&& (TYPE_MODE (TREE_TYPE (type)) != BLKmode
|| TYPE_NO_FORCE_BLK (TREE_TYPE (type))))
{
- TYPE_MODE (type)
- = mode_for_size_tree (TYPE_SIZE (type), MODE_INT, 1);
+ /* One-element arrays get the component type's mode. */
+ if (simple_cst_equal (TYPE_SIZE (type),
+ TYPE_SIZE (TREE_TYPE (type))))
+ TYPE_MODE (type) = TYPE_MODE (TREE_TYPE (type));
+ else
+ TYPE_MODE (type)
+ = mode_for_size_tree (TYPE_SIZE (type), MODE_INT, 1);
if (TYPE_MODE (type) != BLKmode
&& STRICT_ALIGNMENT && TYPE_ALIGN (type) < BIGGEST_ALIGNMENT
if (TREE_CODE (type) == QUAL_UNION_TYPE)
TYPE_FIELDS (type) = nreverse (TYPE_FIELDS (type));
+ if (lang_adjust_rli)
+ (*lang_adjust_rli) (rli);
+
/* Finish laying out the record. */
- finish_record_layout (rli);
+ finish_record_layout (rli, /*free_p=*/true);
}
break;
- case SET_TYPE: /* Used by Chill and Pascal. */
+ case SET_TYPE: /* Used by Chill and Pascal. */
if (TREE_CODE (TYPE_MAX_VALUE (TYPE_DOMAIN (type))) != INTEGER_CST
|| TREE_CODE (TYPE_MIN_VALUE (TYPE_DOMAIN (type))) != INTEGER_CST)
- abort();
+ abort ();
else
{
#ifndef SET_WORD_SIZE
TYPE_SIZE (type) = bitsize_int (rounded_size);
TYPE_SIZE_UNIT (type) = size_int (rounded_size / BITS_PER_UNIT);
TYPE_ALIGN (type) = alignment;
+ TYPE_USER_ALIGN (type) = 0;
TYPE_PRECISION (type) = size_in_bits;
}
break;
/* The size may vary in different languages, so the language front end
should fill in the size. */
TYPE_ALIGN (type) = BIGGEST_ALIGNMENT;
+ TYPE_USER_ALIGN (type) = 0;
TYPE_MODE (type) = BLKmode;
break;
/* Compute the final TYPE_SIZE, TYPE_ALIGN, etc. for TYPE. For
records and unions, finish_record_layout already called this
function. */
- if (TREE_CODE (type) != RECORD_TYPE
+ if (TREE_CODE (type) != RECORD_TYPE
&& TREE_CODE (type) != UNION_TYPE
&& TREE_CODE (type) != QUAL_UNION_TYPE)
finalize_type_size (type);
- pop_obstacks ();
- resume_momentary (old);
-
/* If this type is created before sizetype has been permanently set,
record it so set_sizetype can fix it up. */
if (! sizetype_set)
early_type_list = tree_cons (NULL_TREE, type, early_type_list);
+
+ /* If an alias set has been set for this aggregate when it was incomplete,
+ force it into alias set 0.
+ This is too conservative, but we cannot call record_component_aliases
+ here because some frontends still change the aggregates after
+ layout_type. */
+ if (AGGREGATE_TYPE_P (type) && TYPE_ALIAS_SET_KNOWN_P (type))
+ TYPE_ALIAS_SET (type) = 0;
}
\f
/* Create and return a type for signed integers of PRECISION bits. */
make_signed_type (precision)
int precision;
{
- register tree type = make_node (INTEGER_TYPE);
+ tree type = make_node (INTEGER_TYPE);
TYPE_PRECISION (type) = precision;
make_unsigned_type (precision)
int precision;
{
- register tree type = make_node (INTEGER_TYPE);
+ tree type = make_node (INTEGER_TYPE);
TYPE_PRECISION (type) = precision;
TYPE_MODE (t) = SImode;
TYPE_ALIGN (t) = GET_MODE_ALIGNMENT (SImode);
+ TYPE_USER_ALIGN (t) = 0;
TYPE_SIZE (t) = build_int_2 (GET_MODE_BITSIZE (SImode), 0);
TYPE_SIZE_UNIT (t) = build_int_2 (GET_MODE_SIZE (SImode), 0);
TREE_UNSIGNED (t) = 1;
TYPE_NAME (bitsizetype) = get_identifier ("bit_size_type");
/* Show is a sizetype, is a main type, and has no pointers to it. */
- for (i = 0; i < sizeof sizetype_tab / sizeof sizetype_tab[0]; i++)
+ for (i = 0; i < ARRAY_SIZE (sizetype_tab); i++)
{
TYPE_IS_SIZETYPE (sizetype_tab[i]) = 1;
TYPE_MAIN_VARIANT (sizetype_tab[i]) = sizetype_tab[i];
TYPE_REFERENCE_TO (sizetype_tab[i]) = 0;
}
- ggc_add_tree_root ((tree *) &sizetype_tab,
- sizeof sizetype_tab / sizeof (tree));
-
/* Go down each of the types we already made and set the proper type
for the sizes in them. */
for (t = early_type_list; t != 0; t = TREE_CHAIN (t))
fixup_signed_type (type)
tree type;
{
- register int precision = TYPE_PRECISION (type);
+ int precision = TYPE_PRECISION (type);
+
+ /* We can not represent properly constants greater then
+ 2 * HOST_BITS_PER_WIDE_INT, still we need the types
+ as they are used by i386 vector extensions and friends. */
+ if (precision > HOST_BITS_PER_WIDE_INT * 2)
+ precision = HOST_BITS_PER_WIDE_INT * 2;
TYPE_MIN_VALUE (type)
= build_int_2 ((precision - HOST_BITS_PER_WIDE_INT > 0
fixup_unsigned_type (type)
tree type;
{
- register int precision = TYPE_PRECISION (type);
+ int precision = TYPE_PRECISION (type);
+
+ /* We can not represent properly constants greater then
+ 2 * HOST_BITS_PER_WIDE_INT, still we need the types
+ as they are used by i386 vector extensions and friends. */
+ if (precision > HOST_BITS_PER_WIDE_INT * 2)
+ precision = HOST_BITS_PER_WIDE_INT * 2;
TYPE_MIN_VALUE (type) = build_int_2 (0, 0);
TYPE_MAX_VALUE (type)
return mode;
}
-/* Return the alignment of MODE. This will be bounded by 1 and
- BIGGEST_ALIGNMENT. */
-
-unsigned int
-get_mode_alignment (mode)
- enum machine_mode mode;
-{
- unsigned int alignment = GET_MODE_UNIT_SIZE (mode) * BITS_PER_UNIT;
-
- /* Extract the LSB of the size. */
- alignment = alignment & -alignment;
-
- alignment = MIN (BIGGEST_ALIGNMENT, MAX (1, alignment));
- return alignment;
-}
-
-/* This function is run once to initialize stor-layout.c. */
-
-void
-init_stor_layout_once ()
-{
- ggc_add_tree_root (&pending_sizes, 1);
-}
+#include "gt-stor-layout.h"