/* C-compiler utilities for types and variables storage layout
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1996, 1998,
- 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GCC.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
#include "config.h"
#include "flags.h"
#include "function.h"
#include "expr.h"
+#include "output.h"
#include "toplev.h"
#include "ggc.h"
#include "target.h"
#include "langhooks.h"
-
-/* Set to one when set_sizetype has been called. */
-static int sizetype_set;
-
-/* List of types created before set_sizetype has been called. We do not
- make this a GGC root since we want these nodes to be reclaimed. */
-static tree early_type_list;
+#include "regs.h"
+#include "params.h"
/* Data type for the expressions representing sizes of data types.
It is the first integer type laid out. */
/* If nonzero, this is an upper limit on alignment of structure fields.
The value is measured in bits. */
-unsigned int maximum_field_alignment;
-
-/* If nonzero, the alignment of a bitstring or (power-)set value, in bits.
- May be overridden by front-ends. */
-unsigned int set_alignment = 0;
+unsigned int maximum_field_alignment = TARGET_DEFAULT_PACK_STRUCT * BITS_PER_UNIT;
+/* ... and its original value in bytes, specified via -fpack-struct=<value>. */
+unsigned int initial_max_fld_align = TARGET_DEFAULT_PACK_STRUCT;
/* Nonzero if all REFERENCE_TYPEs are internal and hence should be
allocated in Pmode, not ptr_mode. Set only by internal_reference_types
called only by a front end. */
static int reference_types_internal = 0;
-static void finalize_record_size PARAMS ((record_layout_info));
-static void finalize_type_size PARAMS ((tree));
-static void place_union_field PARAMS ((record_layout_info, tree));
+static void finalize_record_size (record_layout_info);
+static void finalize_type_size (tree);
+static void place_union_field (record_layout_info, tree);
#if defined (PCC_BITFIELD_TYPE_MATTERS) || defined (BITFIELD_NBYTES_LIMITED)
-static int excess_unit_span PARAMS ((HOST_WIDE_INT, HOST_WIDE_INT,
- HOST_WIDE_INT, HOST_WIDE_INT,
- tree));
+static int excess_unit_span (HOST_WIDE_INT, HOST_WIDE_INT, HOST_WIDE_INT,
+ HOST_WIDE_INT, tree);
#endif
-static unsigned int update_alignment_for_field
- PARAMS ((record_layout_info, tree,
- unsigned int));
-extern void debug_rli PARAMS ((record_layout_info));
+extern void debug_rli (record_layout_info);
\f
/* SAVE_EXPRs for sizes of types and decls, waiting to be expanded. */
static GTY(()) tree pending_sizes;
-/* Nonzero means cannot safely call expand_expr now,
- so put variable sizes onto `pending_sizes' instead. */
-
-int immediate_size_expand;
-
/* Show that REFERENCE_TYPES are internal and should be Pmode. Called only
by front end. */
void
-internal_reference_types ()
+internal_reference_types (void)
{
reference_types_internal = 1;
}
/* Get a list of all the objects put on the pending sizes list. */
tree
-get_pending_sizes ()
+get_pending_sizes (void)
{
tree chain = pending_sizes;
- tree t;
-
- /* Put each SAVE_EXPR into the current function. */
- for (t = chain; t; t = TREE_CHAIN (t))
- SAVE_EXPR_CONTEXT (TREE_VALUE (t)) = current_function_decl;
pending_sizes = 0;
return chain;
}
-/* Return nonzero if EXPR is present on the pending sizes list. */
-
-int
-is_pending_size (expr)
- tree expr;
-{
- tree t;
-
- for (t = pending_sizes; t; t = TREE_CHAIN (t))
- if (TREE_VALUE (t) == expr)
- return 1;
- return 0;
-}
-
/* Add EXPR to the pending sizes list. */
void
-put_pending_size (expr)
- tree expr;
+put_pending_size (tree expr)
{
/* Strip any simple arithmetic from EXPR to see if it has an underlying
SAVE_EXPR. */
empty. */
void
-put_pending_sizes (chain)
- tree chain;
+put_pending_sizes (tree chain)
{
- if (pending_sizes)
- abort ();
-
+ gcc_assert (!pending_sizes);
pending_sizes = chain;
}
to serve as the actual size-expression for a type or decl. */
tree
-variable_size (size)
- tree size;
+variable_size (tree size)
{
tree save;
just return SIZE unchanged. Likewise for self-referential sizes and
constant sizes. */
if (TREE_CONSTANT (size)
- || (*lang_hooks.decls.global_bindings_p) () < 0
- || contains_placeholder_p (size))
+ || lang_hooks.decls.global_bindings_p () < 0
+ || CONTAINS_PLACEHOLDER_P (size))
return size;
- if (TREE_CODE (size) == MINUS_EXPR && integer_onep (TREE_OPERAND (size, 1)))
- /* If this is the upper bound of a C array, leave the minus 1 outside
- the SAVE_EXPR so it can be folded away. */
- TREE_OPERAND (size, 0) = save = save_expr (TREE_OPERAND (size, 0));
- else
- size = save = save_expr (size);
+ size = save_expr (size);
/* If an array with a variable number of elements is declared, and
the elements require destruction, we will emit a cleanup for the
`unsaved', i.e., all SAVE_EXPRs are recalculated. However, we do
not wish to do that here; the array-size is the same in both
places. */
- if (TREE_CODE (save) == SAVE_EXPR)
- SAVE_EXPR_PERSISTENT_P (save) = 1;
+ save = skip_simple_arithmetic (size);
+
+ if (cfun && cfun->x_dont_save_pending_sizes_p)
+ /* The front-end doesn't want us to keep a list of the expressions
+ that determine sizes for variable size objects. Trust it. */
+ return size;
- if ((*lang_hooks.decls.global_bindings_p) ())
+ if (lang_hooks.decls.global_bindings_p ())
{
if (TREE_CONSTANT (size))
- error ("type size can't be explicitly evaluated");
+ error ("type size can%'t be explicitly evaluated");
else
error ("variable-size type declared outside of any function");
return size_one_node;
}
- if (immediate_size_expand)
- expand_expr (save, const0_rtx, VOIDmode, 0);
- else if (cfun != 0 && cfun->x_dont_save_pending_sizes_p)
- /* The front-end doesn't want us to keep a list of the expressions
- that determine sizes for variable size objects. */
- ;
- else
- put_pending_size (save);
+ put_pending_size (save);
return size;
}
#define MAX_FIXED_MODE_SIZE GET_MODE_BITSIZE (DImode)
#endif
-/* Return the machine mode to use for a nonscalar of SIZE bits.
- The mode must be in class CLASS, and have exactly that many bits.
- If LIMIT is nonzero, modes of wider than MAX_FIXED_MODE_SIZE will not
- be used. */
+/* Return the machine mode to use for a nonscalar of SIZE bits. The
+ mode must be in class CLASS, and have exactly that many value bits;
+ it may have padding as well. If LIMIT is nonzero, modes of wider
+ than MAX_FIXED_MODE_SIZE will not be used. */
enum machine_mode
-mode_for_size (size, class, limit)
- unsigned int size;
- enum mode_class class;
- int limit;
+mode_for_size (unsigned int size, enum mode_class class, int limit)
{
enum machine_mode mode;
/* Get the first mode which has this size, in the specified class. */
for (mode = GET_CLASS_NARROWEST_MODE (class); mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
- if (GET_MODE_BITSIZE (mode) == size)
+ if (GET_MODE_PRECISION (mode) == size)
return mode;
return BLKmode;
/* Similar, except passed a tree node. */
enum machine_mode
-mode_for_size_tree (size, class, limit)
- tree size;
- enum mode_class class;
- int limit;
+mode_for_size_tree (tree size, enum mode_class class, int limit)
{
if (TREE_CODE (size) != INTEGER_CST
+ || TREE_OVERFLOW (size)
/* What we really want to say here is that the size can fit in a
host integer, but we know there's no way we'd find a mode for
this many bits, so there's no point in doing the precise test. */
}
/* Similar, but never return BLKmode; return the narrowest mode that
- contains at least the requested number of bits. */
+ contains at least the requested number of value bits. */
enum machine_mode
-smallest_mode_for_size (size, class)
- unsigned int size;
- enum mode_class class;
+smallest_mode_for_size (unsigned int size, enum mode_class class)
{
enum machine_mode mode;
specified class. */
for (mode = GET_CLASS_NARROWEST_MODE (class); mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
- if (GET_MODE_BITSIZE (mode) >= size)
+ if (GET_MODE_PRECISION (mode) >= size)
return mode;
- abort ();
+ gcc_unreachable ();
}
/* Find an integer mode of the exact same size, or BLKmode on failure. */
enum machine_mode
-int_mode_for_mode (mode)
- enum machine_mode mode;
+int_mode_for_mode (enum machine_mode mode)
{
switch (GET_MODE_CLASS (mode))
{
case MODE_CC:
default:
- abort ();
+ gcc_unreachable ();
}
return mode;
BIGGEST_ALIGNMENT. */
unsigned int
-get_mode_alignment (mode)
- enum machine_mode mode;
+get_mode_alignment (enum machine_mode mode)
{
- unsigned int alignment;
-
- if (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT
- || GET_MODE_CLASS (mode) == MODE_COMPLEX_INT)
- alignment = GET_MODE_UNIT_SIZE (mode);
- else
- alignment = GET_MODE_SIZE (mode);
-
- /* Extract the LSB of the size. */
- alignment = alignment & -alignment;
- alignment *= BITS_PER_UNIT;
-
- alignment = MIN (BIGGEST_ALIGNMENT, MAX (1, alignment));
- return alignment;
-}
-
-/* Return the value of VALUE, rounded up to a multiple of DIVISOR.
- This can only be applied to objects of a sizetype. */
-
-tree
-round_up (value, divisor)
- tree value;
- int divisor;
-{
- tree arg = size_int_type (divisor, TREE_TYPE (value));
-
- return size_binop (MULT_EXPR, size_binop (CEIL_DIV_EXPR, value, arg), arg);
+ return MIN (BIGGEST_ALIGNMENT, MAX (1, mode_base_align[mode]*BITS_PER_UNIT));
}
-/* Likewise, but round down. */
-
-tree
-round_down (value, divisor)
- tree value;
- int divisor;
-{
- tree arg = size_int_type (divisor, TREE_TYPE (value));
-
- return size_binop (MULT_EXPR, size_binop (FLOOR_DIV_EXPR, value, arg), arg);
-}
\f
/* Subroutine of layout_decl: Force alignment required for the data type.
But if the decl itself wants greater alignment, don't override that. */
if (TYPE_ALIGN (type) > DECL_ALIGN (decl))
{
DECL_ALIGN (decl) = TYPE_ALIGN (type);
- DECL_USER_ALIGN (decl) = TYPE_USER_ALIGN (type);
+ if (TREE_CODE (decl) == FIELD_DECL)
+ DECL_USER_ALIGN (decl) = TYPE_USER_ALIGN (type);
}
}
the record will be aligned to suit. */
void
-layout_decl (decl, known_align)
- tree decl;
- unsigned int known_align;
+layout_decl (tree decl, unsigned int known_align)
{
tree type = TREE_TYPE (decl);
enum tree_code code = TREE_CODE (decl);
if (code == CONST_DECL)
return;
- else if (code != VAR_DECL && code != PARM_DECL && code != RESULT_DECL
- && code != TYPE_DECL && code != FIELD_DECL)
- abort ();
-
+
+ gcc_assert (code == VAR_DECL || code == PARM_DECL || code == RESULT_DECL
+ || code == TYPE_DECL ||code == FIELD_DECL);
+
rtl = DECL_RTL_IF_SET (decl);
if (type == error_mark_node)
size in bytes from the size in bits. If we have already set the mode,
don't set it again since we can be called twice for FIELD_DECLs. */
- TREE_UNSIGNED (decl) = TREE_UNSIGNED (type);
+ DECL_UNSIGNED (decl) = TYPE_UNSIGNED (type);
if (DECL_MODE (decl) == VOIDmode)
DECL_MODE (decl) = TYPE_MODE (type);
}
else if (DECL_SIZE_UNIT (decl) == 0)
DECL_SIZE_UNIT (decl)
- = convert (sizetype, size_binop (CEIL_DIV_EXPR, DECL_SIZE (decl),
- bitsize_unit_node));
+ = fold_convert (sizetype, size_binop (CEIL_DIV_EXPR, DECL_SIZE (decl),
+ bitsize_unit_node));
if (code != FIELD_DECL)
/* For non-fields, update the alignment from the type. */
else
/* For fields, it's a bit more complicated... */
{
+ bool old_user_align = DECL_USER_ALIGN (decl);
+
if (DECL_BIT_FIELD (decl))
{
DECL_BIT_FIELD_TYPE (decl) = type;
field. */
if (integer_zerop (DECL_SIZE (decl))
&& ! DECL_PACKED (decl)
- && ! (*targetm.ms_bitfield_layout_p) (DECL_FIELD_CONTEXT (decl)))
+ && ! targetm.ms_bitfield_layout_p (DECL_FIELD_CONTEXT (decl)))
{
#ifdef PCC_BITFIELD_TYPE_MATTERS
if (PCC_BITFIELD_TYPE_MATTERS)
enum machine_mode xmode
= mode_for_size_tree (DECL_SIZE (decl), MODE_INT, 1);
- if (xmode != BLKmode && known_align >= GET_MODE_ALIGNMENT (xmode))
+ if (xmode != BLKmode
+ && (known_align == 0
+ || known_align >= GET_MODE_ALIGNMENT (xmode)))
{
DECL_ALIGN (decl) = MAX (GET_MODE_ALIGNMENT (xmode),
DECL_ALIGN (decl));
}
else if (DECL_PACKED (decl) && DECL_USER_ALIGN (decl))
/* Don't touch DECL_ALIGN. For other packed fields, go ahead and
- round up; we'll reduce it again below. */;
+ round up; we'll reduce it again below. We want packing to
+ supersede USER_ALIGN inherited from the type, but defer to
+ alignment explicitly specified on the field decl. */;
else
do_type_align (type, decl);
/* If the field is of variable size, we can't misalign it since we
have no way to make a temporary to align the result. But this
isn't an issue if the decl is not addressable. Likewise if it
- is of unknown size. */
+ is of unknown size.
+
+ Note that do_type_align may set DECL_USER_ALIGN, so we need to
+ check old_user_align instead. */
if (DECL_PACKED (decl)
- && !DECL_USER_ALIGN (decl)
+ && !old_user_align
&& (DECL_NONADDRESSABLE_P (decl)
|| DECL_SIZE_UNIT (decl) == 0
|| TREE_CODE (DECL_SIZE_UNIT (decl)) == INTEGER_CST))
DECL_ALIGN (decl) = MIN (DECL_ALIGN (decl), BITS_PER_UNIT);
- /* Should this be controlled by DECL_USER_ALIGN, too? */
- if (maximum_field_alignment != 0)
- DECL_ALIGN (decl) = MIN (DECL_ALIGN (decl), maximum_field_alignment);
- if (! DECL_USER_ALIGN (decl))
+ if (! DECL_USER_ALIGN (decl) && ! DECL_PACKED (decl))
{
/* Some targets (i.e. i386, VMS) limit struct field alignment
to a lower boundary than alignment of variables unless
DECL_ALIGN (decl) = ADJUST_FIELD_ALIGN (decl, DECL_ALIGN (decl));
#endif
}
+
+ /* Should this be controlled by DECL_USER_ALIGN, too? */
+ if (maximum_field_alignment != 0)
+ DECL_ALIGN (decl) = MIN (DECL_ALIGN (decl), maximum_field_alignment);
}
/* Evaluate nonconstant size only once, either now or as soon as safe. */
int size_as_int = TREE_INT_CST_LOW (size);
if (compare_tree_int (size, size_as_int) == 0)
- warning_with_decl (decl, "size of `%s' is %d bytes", size_as_int);
+ warning (0, "size of %q+D is %d bytes", decl, size_as_int);
else
- warning_with_decl (decl, "size of `%s' is larger than %d bytes",
- larger_than_size);
+ warning (0, "size of %q+D is larger than %wd bytes",
+ decl, larger_than_size);
}
}
SET_DECL_RTL (decl, rtl);
}
}
+
+/* Given a VAR_DECL, PARM_DECL or RESULT_DECL, clears the results of
+ a previous call to layout_decl and calls it again. */
+
+void
+relayout_decl (tree decl)
+{
+ DECL_SIZE (decl) = DECL_SIZE_UNIT (decl) = 0;
+ DECL_MODE (decl) = VOIDmode;
+ DECL_ALIGN (decl) = 0;
+ SET_DECL_RTL (decl, 0);
+
+ layout_decl (decl, 0);
+}
\f
/* Hook for a front-end function that can modify the record layout as needed
immediately before it is finalized. */
-void (*lang_adjust_rli) PARAMS ((record_layout_info)) = 0;
+static void (*lang_adjust_rli) (record_layout_info) = 0;
void
-set_lang_adjust_rli (f)
- void (*f) PARAMS ((record_layout_info));
+set_lang_adjust_rli (void (*f) (record_layout_info))
{
lang_adjust_rli = f;
}
out the record. */
record_layout_info
-start_record_layout (t)
- tree t;
+start_record_layout (tree t)
{
- record_layout_info rli
- = (record_layout_info) xmalloc (sizeof (struct record_layout_info_s));
+ record_layout_info rli = xmalloc (sizeof (struct record_layout_info_s));
rli->t = t;
the offset/bitpos forms and byte and bit offsets. */
tree
-bit_from_pos (offset, bitpos)
- tree offset, bitpos;
+bit_from_pos (tree offset, tree bitpos)
{
return size_binop (PLUS_EXPR, bitpos,
- size_binop (MULT_EXPR, convert (bitsizetype, offset),
+ size_binop (MULT_EXPR,
+ fold_convert (bitsizetype, offset),
bitsize_unit_node));
}
tree
-byte_from_pos (offset, bitpos)
- tree offset, bitpos;
+byte_from_pos (tree offset, tree bitpos)
{
return size_binop (PLUS_EXPR, offset,
- convert (sizetype,
- size_binop (TRUNC_DIV_EXPR, bitpos,
- bitsize_unit_node)));
+ fold_convert (sizetype,
+ size_binop (TRUNC_DIV_EXPR, bitpos,
+ bitsize_unit_node)));
}
void
-pos_from_bit (poffset, pbitpos, off_align, pos)
- tree *poffset, *pbitpos;
- unsigned int off_align;
- tree pos;
+pos_from_bit (tree *poffset, tree *pbitpos, unsigned int off_align,
+ tree pos)
{
*poffset = size_binop (MULT_EXPR,
- convert (sizetype,
- size_binop (FLOOR_DIV_EXPR, pos,
- bitsize_int (off_align))),
+ fold_convert (sizetype,
+ size_binop (FLOOR_DIV_EXPR, pos,
+ bitsize_int (off_align))),
size_int (off_align / BITS_PER_UNIT));
*pbitpos = size_binop (FLOOR_MOD_EXPR, pos, bitsize_int (off_align));
}
normalize the offsets so they are within the alignment. */
void
-normalize_offset (poffset, pbitpos, off_align)
- tree *poffset, *pbitpos;
- unsigned int off_align;
+normalize_offset (tree *poffset, tree *pbitpos, unsigned int off_align)
{
/* If the bit position is now larger than it should be, adjust it
downwards. */
*poffset
= size_binop (PLUS_EXPR, *poffset,
- size_binop (MULT_EXPR, convert (sizetype, extra_aligns),
+ size_binop (MULT_EXPR,
+ fold_convert (sizetype, extra_aligns),
size_int (off_align / BITS_PER_UNIT)));
*pbitpos
/* Print debugging information about the information in RLI. */
void
-debug_rli (rli)
- record_layout_info rli;
+debug_rli (record_layout_info rli)
{
print_node_brief (stderr, "type", rli->t, 0);
print_node_brief (stderr, "\noffset", rli->offset, 0);
BITPOS if necessary to keep BITPOS below OFFSET_ALIGN. */
void
-normalize_rli (rli)
- record_layout_info rli;
+normalize_rli (record_layout_info rli)
{
normalize_offset (&rli->offset, &rli->bitpos, rli->offset_align);
}
/* Returns the size in bytes allocated so far. */
tree
-rli_size_unit_so_far (rli)
- record_layout_info rli;
+rli_size_unit_so_far (record_layout_info rli)
{
return byte_from_pos (rli->offset, rli->bitpos);
}
/* Returns the size in bits allocated so far. */
tree
-rli_size_so_far (rli)
- record_layout_info rli;
+rli_size_so_far (record_layout_info rli)
{
return bit_from_pos (rli->offset, rli->bitpos);
}
/* FIELD is about to be added to RLI->T. The alignment (in bits) of
- the next available location is given by KNOWN_ALIGN. Update the
- variable alignment fields in RLI, and return the alignment to give
- the FIELD. */
-
-static unsigned int
-update_alignment_for_field (rli, field, known_align)
- record_layout_info rli;
- tree field;
- unsigned int known_align;
+ the next available location within the record is given by KNOWN_ALIGN.
+ Update the variable alignment fields in RLI, and return the alignment
+ to give the FIELD. */
+
+unsigned int
+update_alignment_for_field (record_layout_info rli, tree field,
+ unsigned int known_align)
{
/* The alignment required for FIELD. */
unsigned int desired_align;
/* Record must have at least as much alignment as any field.
Otherwise, the alignment of the field within the record is
meaningless. */
- if (is_bitfield && (* targetm.ms_bitfield_layout_p) (rli->t))
+ if (is_bitfield && targetm.ms_bitfield_layout_p (rli->t))
{
/* Here, the alignment of the underlying type of a bitfield can
affect the alignment of a record; even a zero-sized field
applies if there was an immediately prior, nonzero-size
bitfield. (That's the way it is, experimentally.) */
if (! integer_zerop (DECL_SIZE (field))
- ? ! DECL_PACKED (field)
- : (rli->prev_field
- && DECL_BIT_FIELD_TYPE (rli->prev_field)
- && ! integer_zerop (DECL_SIZE (rli->prev_field))))
+ ? ! DECL_PACKED (field)
+ : (rli->prev_field
+ && DECL_BIT_FIELD_TYPE (rli->prev_field)
+ && ! integer_zerop (DECL_SIZE (rli->prev_field))))
{
unsigned int type_align = TYPE_ALIGN (type);
type_align = MAX (type_align, desired_align);
type_align = MIN (type_align, maximum_field_alignment);
rli->record_align = MAX (rli->record_align, type_align);
rli->unpacked_align = MAX (rli->unpacked_align, TYPE_ALIGN (type));
+ /* If we start a new run, make sure we start it properly aligned. */
+ if ((!rli->prev_field
+ || integer_zerop (DECL_SIZE (field))
+ || integer_zerop (DECL_SIZE (rli->prev_field))
+ || !host_integerp (DECL_SIZE (rli->prev_field), 0)
+ || !host_integerp (TYPE_SIZE (type), 0)
+ || !simple_cst_equal (TYPE_SIZE (type),
+ TYPE_SIZE (TREE_TYPE (rli->prev_field)))
+ || (rli->remaining_in_alignment
+ < tree_low_cst (DECL_SIZE (field), 0)))
+ && desired_align < type_align)
+ desired_align = type_align;
}
}
#ifdef PCC_BITFIELD_TYPE_MATTERS
else if (is_bitfield && PCC_BITFIELD_TYPE_MATTERS)
{
/* Named bit-fields cause the entire structure to have the
- alignment implied by their type. */
- if (DECL_NAME (field) != 0)
+ alignment implied by their type. Some targets also apply the same
+ rules to unnamed bitfields. */
+ if (DECL_NAME (field) != 0
+ || targetm.align_anon_bitfield ())
{
unsigned int type_align = TYPE_ALIGN (type);
/* Called from place_field to handle unions. */
static void
-place_union_field (rli, field)
- record_layout_info rli;
- tree field;
+place_union_field (record_layout_info rli, tree field)
{
update_alignment_for_field (rli, field, /*known_align=*/0);
if (TREE_CODE (rli->t) == UNION_TYPE)
rli->offset = size_binop (MAX_EXPR, rli->offset, DECL_SIZE_UNIT (field));
else if (TREE_CODE (rli->t) == QUAL_UNION_TYPE)
- rli->offset = fold (build (COND_EXPR, sizetype,
+ rli->offset = fold_build3 (COND_EXPR, sizetype,
DECL_QUALIFIER (field),
- DECL_SIZE_UNIT (field), rli->offset));
+ DECL_SIZE_UNIT (field), rli->offset);
}
#if defined (PCC_BITFIELD_TYPE_MATTERS) || defined (BITFIELD_NBYTES_LIMITED)
at BYTE_OFFSET / BIT_OFFSET. Return nonzero if the field would span more
units of alignment than the underlying TYPE. */
static int
-excess_unit_span (byte_offset, bit_offset, size, align, type)
- HOST_WIDE_INT byte_offset, bit_offset, size, align;
- tree type;
+excess_unit_span (HOST_WIDE_INT byte_offset, HOST_WIDE_INT bit_offset,
+ HOST_WIDE_INT size, HOST_WIDE_INT align, tree type)
{
/* Note that the calculation of OFFSET might overflow; we calculate it so
that we still get the right result as long as ALIGN is a power of two. */
callers that desire that behavior must manually perform that step.) */
void
-place_field (rli, field)
- record_layout_info rli;
- tree field;
+place_field (record_layout_info rli, tree field)
{
/* The alignment required for FIELD. */
unsigned int desired_align;
known_align = (tree_low_cst (rli->bitpos, 1)
& - tree_low_cst (rli->bitpos, 1));
else if (integer_zerop (rli->offset))
- known_align = BIGGEST_ALIGNMENT;
+ known_align = 0;
else if (host_integerp (rli->offset, 1))
known_align = (BITS_PER_UNIT
* (tree_low_cst (rli->offset, 1)
& - tree_low_cst (rli->offset, 1)));
else
known_align = rli->offset_align;
-
+
desired_align = update_alignment_for_field (rli, field, known_align);
+ if (known_align == 0)
+ known_align = MAX (BIGGEST_ALIGNMENT, rli->record_align);
if (warn_packed && DECL_PACKED (field))
{
if (TYPE_ALIGN (type) > desired_align)
{
if (STRICT_ALIGNMENT)
- warning_with_decl (field, "packed attribute causes inefficient alignment for `%s'");
+ warning (OPT_Wattributes, "packed attribute causes "
+ "inefficient alignment for %q+D", field);
else
- warning_with_decl (field, "packed attribute is unnecessary for `%s'");
+ warning (OPT_Wattributes, "packed attribute is "
+ "unnecessary for %q+D", field);
}
}
else
/* No, we need to skip space before this field.
Bump the cumulative size to multiple of field alignment. */
- if (warn_padded)
- warning_with_decl (field, "padding struct to align `%s'");
+ warning (OPT_Wpadded, "padding struct to align %q+D", field);
/* If the alignment is still within offset_align, just align
the bit position. */
/* First adjust OFFSET by the partial bits, then align. */
rli->offset
= size_binop (PLUS_EXPR, rli->offset,
- convert (sizetype,
- size_binop (CEIL_DIV_EXPR, rli->bitpos,
- bitsize_unit_node)));
+ fold_convert (sizetype,
+ size_binop (CEIL_DIV_EXPR, rli->bitpos,
+ bitsize_unit_node)));
rli->bitpos = bitsize_zero_node;
rli->offset = round_up (rli->offset, desired_align / BITS_PER_UNIT);
variable-sized fields, we need not worry about compatibility. */
#ifdef PCC_BITFIELD_TYPE_MATTERS
if (PCC_BITFIELD_TYPE_MATTERS
- && ! (* targetm.ms_bitfield_layout_p) (rli->t)
+ && ! targetm.ms_bitfield_layout_p (rli->t)
&& TREE_CODE (field) == FIELD_DECL
&& type != error_mark_node
&& DECL_BIT_FIELD (field)
#ifdef BITFIELD_NBYTES_LIMITED
if (BITFIELD_NBYTES_LIMITED
- && ! (* targetm.ms_bitfield_layout_p) (rli->t)
+ && ! targetm.ms_bitfield_layout_p (rli->t)
&& TREE_CODE (field) == FIELD_DECL
&& type != error_mark_node
&& DECL_BIT_FIELD_TYPE (field)
Note: for compatibility, we use the type size, not the type alignment
to determine alignment, since that matches the documentation */
- if ((* targetm.ms_bitfield_layout_p) (rli->t)
+ if (targetm.ms_bitfield_layout_p (rli->t)
&& ((DECL_BIT_FIELD_TYPE (field) && ! DECL_PACKED (field))
- || (rli->prev_field && ! DECL_PACKED (rli->prev_field))))
+ || (rli->prev_field && ! DECL_PACKED (rli->prev_field))))
{
/* At this point, either the prior or current are bitfields,
(possibly both), and we're dealing with MS packing. */
if (rli->remaining_in_alignment < bitsize)
{
- /* out of bits; bump up to next 'word'. */
- rli->offset = DECL_FIELD_OFFSET (rli->prev_field);
- rli->bitpos
- = size_binop (PLUS_EXPR, TYPE_SIZE (type),
- DECL_FIELD_BIT_OFFSET (rli->prev_field));
- rli->prev_field = field;
- rli->remaining_in_alignment
- = tree_low_cst (TYPE_SIZE (type), 0);
+ /* If PREV_FIELD is packed, and we haven't lumped
+ non-packed bitfields with it, treat this as if PREV_FIELD
+ was not a bitfield. This avoids anomalies where a packed
+ bitfield with long long base type can take up more
+ space than a same-size bitfield with base type short. */
+ if (rli->prev_packed)
+ rli->prev_field = prev_saved = NULL;
+ else
+ {
+ /* out of bits; bump up to next 'word'. */
+ rli->offset = DECL_FIELD_OFFSET (rli->prev_field);
+ rli->bitpos
+ = size_binop (PLUS_EXPR, TYPE_SIZE (type),
+ DECL_FIELD_BIT_OFFSET (rli->prev_field));
+ rli->prev_field = field;
+ rli->remaining_in_alignment
+ = tree_low_cst (TYPE_SIZE (type), 0) - bitsize;
+ }
}
-
- rli->remaining_in_alignment -= bitsize;
+ else
+ rli->remaining_in_alignment -= bitsize;
}
+ else if (rli->prev_packed)
+ rli->prev_field = prev_saved = NULL;
else
{
/* End of a run: if leaving a run of bitfields of the same type
{
tree type_size = TYPE_SIZE (TREE_TYPE (rli->prev_field));
- rli->bitpos
- = size_binop (PLUS_EXPR, type_size,
- DECL_FIELD_BIT_OFFSET (rli->prev_field));
+ /* If the desired alignment is greater or equal to TYPE_SIZE,
+ we have already adjusted rli->bitpos / rli->offset above.
+ */
+ if ((unsigned HOST_WIDE_INT) tree_low_cst (type_size, 0)
+ > desired_align)
+ rli->bitpos
+ = size_binop (PLUS_EXPR, type_size,
+ DECL_FIELD_BIT_OFFSET (rli->prev_field));
}
else
/* We "use up" size zero fields; the code below should behave
rli->prev_field = NULL;
}
+ rli->prev_packed = 0;
normalize_rli (rli);
}
actual_align = (tree_low_cst (DECL_FIELD_BIT_OFFSET (field), 1)
& - tree_low_cst (DECL_FIELD_BIT_OFFSET (field), 1));
else if (integer_zerop (DECL_FIELD_OFFSET (field)))
- actual_align = BIGGEST_ALIGNMENT;
+ actual_align = MAX (BIGGEST_ALIGNMENT, rli->record_align);
else if (host_integerp (DECL_FIELD_OFFSET (field), 1))
actual_align = (BITS_PER_UNIT
* (tree_low_cst (DECL_FIELD_OFFSET (field), 1)
& - tree_low_cst (DECL_FIELD_OFFSET (field), 1)));
else
actual_align = DECL_OFFSET_ALIGN (field);
+ /* ACTUAL_ALIGN is still the actual alignment *within the record* .
+ store / extract bit field operations will check the alignment of the
+ record against the mode of bit fields. */
if (known_align != actual_align)
layout_decl (field, actual_align);
- /* Only the MS bitfields use this. */
- if (rli->prev_field == NULL && DECL_BIT_FIELD_TYPE(field))
- rli->prev_field = field;
+ if (DECL_BIT_FIELD_TYPE (field))
+ {
+ unsigned int type_align = TYPE_ALIGN (type);
+
+ /* Only the MS bitfields use this. We used to also put any kind of
+ packed bit fields into prev_field, but that makes no sense, because
+ an 8 bit packed bit field shouldn't impose more restriction on
+ following fields than a char field, and the alignment requirements
+ are also not fulfilled.
+ There is no sane value to set rli->remaining_in_alignment to when
+ a packed bitfield in prev_field is unaligned. */
+ if (maximum_field_alignment != 0)
+ type_align = MIN (type_align, maximum_field_alignment);
+ gcc_assert (rli->prev_field
+ || actual_align >= type_align || DECL_PACKED (field)
+ || integer_zerop (DECL_SIZE (field))
+ || !targetm.ms_bitfield_layout_p (rli->t));
+ if (rli->prev_field == NULL && actual_align >= type_align
+ && !integer_zerop (DECL_SIZE (field)))
+ {
+ rli->prev_field = field;
+ /* rli->remaining_in_alignment has not been set if the bitfield
+ has size zero, or if it is a packed bitfield. */
+ rli->remaining_in_alignment
+ = (tree_low_cst (TYPE_SIZE (TREE_TYPE (field)), 0)
+ - tree_low_cst (DECL_SIZE (field), 0));
+ rli->prev_packed = DECL_PACKED (field);
+
+ }
+ else if (rli->prev_field && DECL_PACKED (field))
+ {
+ HOST_WIDE_INT bitsize = tree_low_cst (DECL_SIZE (field), 0);
+
+ if (rli->remaining_in_alignment < bitsize)
+ rli->prev_field = NULL;
+ else
+ rli->remaining_in_alignment -= bitsize;
+ }
+ }
/* Now add size of this field to the size of the record. If the size is
not constant, treat the field as being a multiple of bytes and just
{
rli->offset
= size_binop (PLUS_EXPR, rli->offset,
- convert (sizetype,
- size_binop (CEIL_DIV_EXPR, rli->bitpos,
- bitsize_unit_node)));
+ fold_convert (sizetype,
+ size_binop (CEIL_DIV_EXPR, rli->bitpos,
+ bitsize_unit_node)));
rli->offset
= size_binop (PLUS_EXPR, rli->offset, DECL_SIZE_UNIT (field));
rli->bitpos = bitsize_zero_node;
- rli->offset_align = MIN (rli->offset_align, DECL_ALIGN (field));
+ rli->offset_align = MIN (rli->offset_align, desired_align);
}
else
{
indicated by RLI. */
static void
-finalize_record_size (rli)
- record_layout_info rli;
+finalize_record_size (record_layout_info rli)
{
tree unpadded_size, unpadded_size_unit;
unpadded_size_unit
= size_binop (PLUS_EXPR, unpadded_size_unit, size_one_node);
- /* Round the size up to be a multiple of the required alignment */
-#ifdef ROUND_TYPE_SIZE
- TYPE_SIZE (rli->t) = ROUND_TYPE_SIZE (rli->t, unpadded_size,
- TYPE_ALIGN (rli->t));
- TYPE_SIZE_UNIT (rli->t)
- = ROUND_TYPE_SIZE_UNIT (rli->t, unpadded_size_unit,
- TYPE_ALIGN (rli->t) / BITS_PER_UNIT);
-#else
+ /* Round the size up to be a multiple of the required alignment. */
TYPE_SIZE (rli->t) = round_up (unpadded_size, TYPE_ALIGN (rli->t));
- TYPE_SIZE_UNIT (rli->t) = round_up (unpadded_size_unit,
- TYPE_ALIGN (rli->t) / BITS_PER_UNIT);
-#endif
+ TYPE_SIZE_UNIT (rli->t)
+ = round_up (unpadded_size_unit, TYPE_ALIGN_UNIT (rli->t));
- if (warn_padded && TREE_CONSTANT (unpadded_size)
+ if (TREE_CONSTANT (unpadded_size)
&& simple_cst_equal (unpadded_size, TYPE_SIZE (rli->t)) == 0)
- warning ("padding struct size to alignment boundary");
+ warning (OPT_Wpadded, "padding struct size to alignment boundary");
if (warn_packed && TREE_CODE (rli->t) == RECORD_TYPE
&& TYPE_PACKED (rli->t) && ! rli->packed_maybe_necessary
rli->unpacked_align = MAX (TYPE_ALIGN (rli->t), rli->unpacked_align);
#endif
-#ifdef ROUND_TYPE_SIZE
- unpacked_size = ROUND_TYPE_SIZE (rli->t, TYPE_SIZE (rli->t),
- rli->unpacked_align);
-#else
unpacked_size = round_up (TYPE_SIZE (rli->t), rli->unpacked_align);
-#endif
-
if (simple_cst_equal (unpacked_size, TYPE_SIZE (rli->t)))
{
TYPE_PACKED (rli->t) = 0;
name = IDENTIFIER_POINTER (DECL_NAME (TYPE_NAME (rli->t)));
if (STRICT_ALIGNMENT)
- warning ("packed attribute causes inefficient alignment for `%s'", name);
+ warning (OPT_Wpacked, "packed attribute causes inefficient "
+ "alignment for %qs", name);
else
- warning ("packed attribute is unnecessary for `%s'", name);
+ warning (OPT_Wpacked,
+ "packed attribute is unnecessary for %qs", name);
}
else
{
if (STRICT_ALIGNMENT)
- warning ("packed attribute causes inefficient alignment");
+ warning (OPT_Wpacked,
+ "packed attribute causes inefficient alignment");
else
- warning ("packed attribute is unnecessary");
+ warning (OPT_Wpacked, "packed attribute is unnecessary");
}
}
}
/* Compute the TYPE_MODE for the TYPE (which is a RECORD_TYPE). */
void
-compute_record_mode (type)
- tree type;
+compute_record_mode (tree type)
{
tree field;
enum machine_mode mode = VOIDmode;
BLKmode only because it isn't aligned. */
for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field))
{
- unsigned HOST_WIDE_INT bitpos;
-
if (TREE_CODE (field) != FIELD_DECL)
continue;
if (TREE_CODE (TREE_TYPE (field)) == ERROR_MARK
|| (TYPE_MODE (TREE_TYPE (field)) == BLKmode
- && ! TYPE_NO_FORCE_BLK (TREE_TYPE (field)))
+ && ! TYPE_NO_FORCE_BLK (TREE_TYPE (field))
+ && !(TYPE_SIZE (TREE_TYPE (field)) != 0
+ && integer_zerop (TYPE_SIZE (TREE_TYPE (field)))))
|| ! host_integerp (bit_position (field), 1)
|| DECL_SIZE (field) == 0
|| ! host_integerp (DECL_SIZE (field), 1))
return;
- bitpos = int_bit_position (field);
-
- /* Must be BLKmode if any field crosses a word boundary,
- since extract_bit_field can't handle that in registers. */
- if (bitpos / BITS_PER_WORD
- != ((tree_low_cst (DECL_SIZE (field), 1) + bitpos - 1)
- / BITS_PER_WORD)
- /* But there is no problem if the field is entire words. */
- && tree_low_cst (DECL_SIZE (field), 1) % BITS_PER_WORD != 0)
- return;
-
/* If this field is the whole struct, remember its mode so
that, say, we can put a double in a class into a DF
register instead of forcing it to live in the stack. */
#endif /* MEMBER_TYPE_FORCES_BLK */
}
- /* If we only have one real field; use its mode. This only applies to
- RECORD_TYPE. This does not apply to unions. */
- if (TREE_CODE (type) == RECORD_TYPE && mode != VOIDmode)
+ /* If we only have one real field; use its mode if that mode's size
+ matches the type's size. This only applies to RECORD_TYPE. This
+ does not apply to unions. */
+ if (TREE_CODE (type) == RECORD_TYPE && mode != VOIDmode
+ && host_integerp (TYPE_SIZE (type), 1)
+ && GET_MODE_BITSIZE (mode) == TREE_INT_CST_LOW (TYPE_SIZE (type)))
TYPE_MODE (type) = mode;
else
TYPE_MODE (type) = mode_for_size_tree (TYPE_SIZE (type), MODE_INT, 1);
out. */
static void
-finalize_type_size (type)
- tree type;
+finalize_type_size (tree type)
{
/* Normally, use the alignment corresponding to the mode chosen.
However, where strict alignment is not required, avoid
&& TREE_CODE (type) != QUAL_UNION_TYPE
&& TREE_CODE (type) != ARRAY_TYPE)))
{
- TYPE_ALIGN (type) = GET_MODE_ALIGNMENT (TYPE_MODE (type));
- TYPE_USER_ALIGN (type) = 0;
+ unsigned mode_align = GET_MODE_ALIGNMENT (TYPE_MODE (type));
+
+ /* Don't override a larger alignment requirement coming from a user
+ alignment of one of the fields. */
+ if (mode_align >= TYPE_ALIGN (type))
+ {
+ TYPE_ALIGN (type) = mode_align;
+ TYPE_USER_ALIGN (type) = 0;
+ }
}
/* Do machine-dependent extra alignment. */
result will fit in sizetype. We will get more efficient code using
sizetype, so we force a conversion. */
TYPE_SIZE_UNIT (type)
- = convert (sizetype,
- size_binop (FLOOR_DIV_EXPR, TYPE_SIZE (type),
- bitsize_unit_node));
+ = fold_convert (sizetype,
+ size_binop (FLOOR_DIV_EXPR, TYPE_SIZE (type),
+ bitsize_unit_node));
if (TYPE_SIZE (type) != 0)
{
-#ifdef ROUND_TYPE_SIZE
- TYPE_SIZE (type)
- = ROUND_TYPE_SIZE (type, TYPE_SIZE (type), TYPE_ALIGN (type));
- TYPE_SIZE_UNIT (type)
- = ROUND_TYPE_SIZE_UNIT (type, TYPE_SIZE_UNIT (type),
- TYPE_ALIGN (type) / BITS_PER_UNIT);
-#else
TYPE_SIZE (type) = round_up (TYPE_SIZE (type), TYPE_ALIGN (type));
- TYPE_SIZE_UNIT (type)
- = round_up (TYPE_SIZE_UNIT (type), TYPE_ALIGN (type) / BITS_PER_UNIT);
-#endif
+ TYPE_SIZE_UNIT (type) = round_up (TYPE_SIZE_UNIT (type),
+ TYPE_ALIGN_UNIT (type));
}
/* Evaluate nonconstant sizes only once, either now or as soon as safe. */
G++ 3.2 ABI. */
void
-finish_record_layout (rli, free_p)
- record_layout_info rli;
- int free_p;
+finish_record_layout (record_layout_info rli, int free_p)
{
+ tree field;
+
/* Compute the final size. */
finalize_record_size (rli);
/* Perform any last tweaks to the TYPE_SIZE, etc. */
finalize_type_size (rli->t);
+ /* We might be able to clear DECL_PACKED on any members that happen
+ to be suitably aligned (not forgetting the alignment of the type
+ itself). */
+ for (field = TYPE_FIELDS (rli->t); field; field = TREE_CHAIN (field))
+ if (TREE_CODE (field) == FIELD_DECL && DECL_PACKED (field)
+ && DECL_OFFSET_ALIGN (field) >= TYPE_ALIGN (TREE_TYPE (field))
+ && TYPE_ALIGN (rli->t) >= TYPE_ALIGN (TREE_TYPE (field)))
+ DECL_PACKED (field) = 0;
+
/* Lay out any static members. This is done now because their type
may use the record's type. */
while (rli->pending_statics)
ALIGN_TYPE. */
void
-finish_builtin_struct (type, name, fields, align_type)
- tree type;
- const char *name;
- tree fields;
- tree align_type;
+finish_builtin_struct (tree type, const char *name, tree fields,
+ tree align_type)
{
tree tail, next;
If the type is incomplete, its TYPE_SIZE remains zero. */
void
-layout_type (type)
- tree type;
+layout_type (tree type)
{
- if (type == 0)
- abort ();
+ gcc_assert (type);
+
+ if (type == error_mark_node)
+ return;
/* Do nothing if type has been laid out before. */
if (TYPE_SIZE (type))
case LANG_TYPE:
/* This kind of type is the responsibility
of the language-specific code. */
- abort ();
+ gcc_unreachable ();
case BOOLEAN_TYPE: /* Used for Java, Pascal, and Chill. */
if (TYPE_PRECISION (type) == 0)
case CHAR_TYPE:
if (TREE_CODE (TYPE_MIN_VALUE (type)) == INTEGER_CST
&& tree_int_cst_sgn (TYPE_MIN_VALUE (type)) >= 0)
- TREE_UNSIGNED (type) = 1;
+ TYPE_UNSIGNED (type) = 1;
TYPE_MODE (type) = smallest_mode_for_size (TYPE_PRECISION (type),
MODE_INT);
break;
case COMPLEX_TYPE:
- TREE_UNSIGNED (type) = TREE_UNSIGNED (TREE_TYPE (type));
+ TYPE_UNSIGNED (type) = TYPE_UNSIGNED (TREE_TYPE (type));
TYPE_MODE (type)
= mode_for_size (2 * TYPE_PRECISION (TREE_TYPE (type)),
- (TREE_CODE (TREE_TYPE (type)) == INTEGER_TYPE
- ? MODE_COMPLEX_INT : MODE_COMPLEX_FLOAT),
+ (TREE_CODE (TREE_TYPE (type)) == REAL_TYPE
+ ? MODE_COMPLEX_FLOAT : MODE_COMPLEX_INT),
0);
TYPE_SIZE (type) = bitsize_int (GET_MODE_BITSIZE (TYPE_MODE (type)));
TYPE_SIZE_UNIT (type) = size_int (GET_MODE_SIZE (TYPE_MODE (type)));
case VECTOR_TYPE:
{
- tree subtype;
+ int nunits = TYPE_VECTOR_SUBPARTS (type);
+ tree nunits_tree = build_int_cst (NULL_TREE, nunits);
+ tree innertype = TREE_TYPE (type);
+
+ gcc_assert (!(nunits & (nunits - 1)));
+
+ /* Find an appropriate mode for the vector type. */
+ if (TYPE_MODE (type) == VOIDmode)
+ {
+ enum machine_mode innermode = TYPE_MODE (innertype);
+ enum machine_mode mode;
- subtype = TREE_TYPE (type);
- TREE_UNSIGNED (type) = TREE_UNSIGNED (subtype);
- TYPE_SIZE (type) = bitsize_int (GET_MODE_BITSIZE (TYPE_MODE (type)));
- TYPE_SIZE_UNIT (type) = size_int (GET_MODE_SIZE (TYPE_MODE (type)));
+ /* First, look for a supported vector type. */
+ if (GET_MODE_CLASS (innermode) == MODE_FLOAT)
+ mode = MIN_MODE_VECTOR_FLOAT;
+ else
+ mode = MIN_MODE_VECTOR_INT;
+
+ for (; mode != VOIDmode ; mode = GET_MODE_WIDER_MODE (mode))
+ if (GET_MODE_NUNITS (mode) == nunits
+ && GET_MODE_INNER (mode) == innermode
+ && targetm.vector_mode_supported_p (mode))
+ break;
+
+ /* For integers, try mapping it to a same-sized scalar mode. */
+ if (mode == VOIDmode
+ && GET_MODE_CLASS (innermode) == MODE_INT)
+ mode = mode_for_size (nunits * GET_MODE_BITSIZE (innermode),
+ MODE_INT, 0);
+
+ if (mode == VOIDmode || !have_regs_of_mode[mode])
+ TYPE_MODE (type) = BLKmode;
+ else
+ TYPE_MODE (type) = mode;
+ }
+
+ TYPE_UNSIGNED (type) = TYPE_UNSIGNED (TREE_TYPE (type));
+ TYPE_SIZE_UNIT (type) = int_const_binop (MULT_EXPR,
+ TYPE_SIZE_UNIT (innertype),
+ nunits_tree, 0);
+ TYPE_SIZE (type) = int_const_binop (MULT_EXPR, TYPE_SIZE (innertype),
+ nunits_tree, 0);
+
+ /* Always naturally align vectors. This prevents ABI changes
+ depending on whether or not native vector modes are supported. */
+ TYPE_ALIGN (type) = tree_low_cst (TYPE_SIZE (type), 0);
+ break;
}
- break;
case VOID_TYPE:
/* This is an incomplete type and so doesn't have a size. */
case FUNCTION_TYPE:
case METHOD_TYPE:
- TYPE_MODE (type) = mode_for_size (2 * POINTER_SIZE, MODE_INT, 0);
- TYPE_SIZE (type) = bitsize_int (2 * POINTER_SIZE);
- TYPE_SIZE_UNIT (type) = size_int ((2 * POINTER_SIZE) / BITS_PER_UNIT);
+ /* It's hard to see what the mode and size of a function ought to
+ be, but we do know the alignment is FUNCTION_BOUNDARY, so
+ make it consistent with that. */
+ TYPE_MODE (type) = mode_for_size (FUNCTION_BOUNDARY, MODE_INT, 0);
+ TYPE_SIZE (type) = bitsize_int (FUNCTION_BOUNDARY);
+ TYPE_SIZE_UNIT (type) = size_int (FUNCTION_BOUNDARY / BITS_PER_UNIT);
break;
case POINTER_TYPE:
TYPE_SIZE (type) = bitsize_int (nbits);
TYPE_SIZE_UNIT (type) = size_int (GET_MODE_SIZE (mode));
- TREE_UNSIGNED (type) = 1;
+ TYPE_UNSIGNED (type) = 1;
TYPE_PRECISION (type) = nbits;
}
break;
/* The initial subtraction should happen in the original type so
that (possible) negative values are handled appropriately. */
length = size_binop (PLUS_EXPR, size_one_node,
- convert (sizetype,
- fold (build (MINUS_EXPR,
- TREE_TYPE (lb),
- ub, lb))));
+ fold_convert (sizetype,
+ fold_build2 (MINUS_EXPR,
+ TREE_TYPE (lb),
+ ub, lb)));
/* Special handling for arrays of bits (for Chill). */
element_size = TYPE_SIZE (element);
sure the size is never negative. We should really do this
if *either* bound is non-constant, but this is the best
compromise between C and Ada. */
- if (! TREE_UNSIGNED (sizetype)
+ if (!TYPE_UNSIGNED (sizetype)
&& TREE_CODE (TYPE_MIN_VALUE (index)) != INTEGER_CST
&& TREE_CODE (TYPE_MAX_VALUE (index)) != INTEGER_CST)
length = size_binop (MAX_EXPR, length, size_zero_node);
TYPE_SIZE (type) = size_binop (MULT_EXPR, element_size,
- convert (bitsizetype, length));
+ fold_convert (bitsizetype,
+ length));
/* If we know the size of the element, calculate the total
size directly, rather than do some division thing below.
TYPE_ALIGN (type) = MAX (TYPE_ALIGN (element), BITS_PER_UNIT);
#endif
TYPE_USER_ALIGN (type) = TYPE_USER_ALIGN (element);
-
-#ifdef ROUND_TYPE_SIZE
- if (TYPE_SIZE (type) != 0)
- {
- tree tmp
- = ROUND_TYPE_SIZE (type, TYPE_SIZE (type), TYPE_ALIGN (type));
-
- /* If the rounding changed the size of the type, remove any
- pre-calculated TYPE_SIZE_UNIT. */
- if (simple_cst_equal (TYPE_SIZE (type), tmp) != 1)
- TYPE_SIZE_UNIT (type) = NULL;
-
- TYPE_SIZE (type) = tmp;
- }
-#endif
-
TYPE_MODE (type) = BLKmode;
if (TYPE_SIZE (type) != 0
#ifdef MEMBER_TYPE_FORCES_BLK
}
break;
- case SET_TYPE: /* Used by Chill and Pascal. */
- if (TREE_CODE (TYPE_MAX_VALUE (TYPE_DOMAIN (type))) != INTEGER_CST
- || TREE_CODE (TYPE_MIN_VALUE (TYPE_DOMAIN (type))) != INTEGER_CST)
- abort ();
- else
- {
-#ifndef SET_WORD_SIZE
-#define SET_WORD_SIZE BITS_PER_WORD
-#endif
- unsigned int alignment
- = set_alignment ? set_alignment : SET_WORD_SIZE;
- HOST_WIDE_INT size_in_bits
- = (tree_low_cst (TYPE_MAX_VALUE (TYPE_DOMAIN (type)), 0)
- - tree_low_cst (TYPE_MIN_VALUE (TYPE_DOMAIN (type)), 0) + 1);
- HOST_WIDE_INT rounded_size
- = ((size_in_bits + alignment - 1) / alignment) * alignment;
-
- if (rounded_size > (int) alignment)
- TYPE_MODE (type) = BLKmode;
- else
- TYPE_MODE (type) = mode_for_size (alignment, MODE_INT, 1);
-
- TYPE_SIZE (type) = bitsize_int (rounded_size);
- TYPE_SIZE_UNIT (type) = size_int (rounded_size / BITS_PER_UNIT);
- TYPE_ALIGN (type) = alignment;
- TYPE_USER_ALIGN (type) = 0;
- TYPE_PRECISION (type) = size_in_bits;
- }
- break;
-
- case FILE_TYPE:
- /* The size may vary in different languages, so the language front end
- should fill in the size. */
- TYPE_ALIGN (type) = BIGGEST_ALIGNMENT;
- TYPE_USER_ALIGN (type) = 0;
- TYPE_MODE (type) = BLKmode;
- break;
-
default:
- abort ();
+ gcc_unreachable ();
}
/* Compute the final TYPE_SIZE, TYPE_ALIGN, etc. for TYPE. For
&& TREE_CODE (type) != QUAL_UNION_TYPE)
finalize_type_size (type);
- /* If this type is created before sizetype has been permanently set,
- record it so set_sizetype can fix it up. */
- if (! sizetype_set)
- early_type_list = tree_cons (NULL_TREE, type, early_type_list);
-
/* If an alias set has been set for this aggregate when it was incomplete,
force it into alias set 0.
This is too conservative, but we cannot call record_component_aliases
/* Create and return a type for signed integers of PRECISION bits. */
tree
-make_signed_type (precision)
- int precision;
+make_signed_type (int precision)
{
tree type = make_node (INTEGER_TYPE);
/* Create and return a type for unsigned integers of PRECISION bits. */
tree
-make_unsigned_type (precision)
- int precision;
+make_unsigned_type (int precision)
{
tree type = make_node (INTEGER_TYPE);
value to enable integer types to be created. */
void
-initialize_sizetypes ()
+initialize_sizetypes (bool signed_p)
{
tree t = make_node (INTEGER_TYPE);
- /* Set this so we do something reasonable for the build_int_2 calls
- below. */
- integer_type_node = t;
-
TYPE_MODE (t) = SImode;
TYPE_ALIGN (t) = GET_MODE_ALIGNMENT (SImode);
TYPE_USER_ALIGN (t) = 0;
- TYPE_SIZE (t) = build_int_2 (GET_MODE_BITSIZE (SImode), 0);
- TYPE_SIZE_UNIT (t) = build_int_2 (GET_MODE_SIZE (SImode), 0);
- TREE_UNSIGNED (t) = 1;
- TYPE_PRECISION (t) = GET_MODE_BITSIZE (SImode);
- TYPE_MIN_VALUE (t) = build_int_2 (0, 0);
TYPE_IS_SIZETYPE (t) = 1;
+ TYPE_UNSIGNED (t) = !signed_p;
+ TYPE_SIZE (t) = build_int_cst (t, GET_MODE_BITSIZE (SImode));
+ TYPE_SIZE_UNIT (t) = build_int_cst (t, GET_MODE_SIZE (SImode));
+ TYPE_PRECISION (t) = GET_MODE_BITSIZE (SImode);
+ TYPE_MIN_VALUE (t) = build_int_cst (t, 0);
/* 1000 avoids problems with possible overflow and is certainly
larger than any size value we'd want to be storing. */
- TYPE_MAX_VALUE (t) = build_int_2 (1000, 0);
+ TYPE_MAX_VALUE (t) = build_int_cst (t, 1000);
- /* These two must be different nodes because of the caching done in
- size_int_wide. */
sizetype = t;
- bitsizetype = copy_node (t);
- integer_type_node = 0;
+ bitsizetype = build_distinct_type_copy (t);
}
-/* Set sizetype to TYPE, and initialize *sizetype accordingly.
- Also update the type of any standard type's sizes made so far. */
+/* Make sizetype a version of TYPE, and initialize *sizetype
+ accordingly. We do this by overwriting the stub sizetype and
+ bitsizetype nodes created by initialize_sizetypes. This makes sure
+ that (a) anything stubby about them no longer exists, (b) any
+ INTEGER_CSTs created with such a type, remain valid. */
void
-set_sizetype (type)
- tree type;
+set_sizetype (tree type)
{
int oprecision = TYPE_PRECISION (type);
/* The *bitsizetype types use a precision that avoids overflows when
precision. */
int precision = MIN (oprecision + BITS_PER_UNIT_LOG + 1,
2 * HOST_BITS_PER_WIDE_INT);
- unsigned int i;
tree t;
- if (sizetype_set)
- abort ();
-
- /* Make copies of nodes since we'll be setting TYPE_IS_SIZETYPE. */
- sizetype = copy_node (type);
- TYPE_DOMAIN (sizetype) = type;
- TYPE_IS_SIZETYPE (sizetype) = 1;
- bitsizetype = make_node (INTEGER_TYPE);
- TYPE_NAME (bitsizetype) = TYPE_NAME (type);
- TYPE_PRECISION (bitsizetype) = precision;
- TYPE_IS_SIZETYPE (bitsizetype) = 1;
-
- if (TREE_UNSIGNED (type))
- fixup_unsigned_type (bitsizetype);
- else
- fixup_signed_type (bitsizetype);
-
- layout_type (bitsizetype);
+ gcc_assert (TYPE_UNSIGNED (type) == TYPE_UNSIGNED (sizetype));
- if (TREE_UNSIGNED (type))
+ t = build_distinct_type_copy (type);
+ /* We do want to use sizetype's cache, as we will be replacing that
+ type. */
+ TYPE_CACHED_VALUES (t) = TYPE_CACHED_VALUES (sizetype);
+ TYPE_CACHED_VALUES_P (t) = TYPE_CACHED_VALUES_P (sizetype);
+ TREE_TYPE (TYPE_CACHED_VALUES (t)) = type;
+ TYPE_UID (t) = TYPE_UID (sizetype);
+ TYPE_IS_SIZETYPE (t) = 1;
+
+ /* Replace our original stub sizetype. */
+ memcpy (sizetype, t, tree_size (sizetype));
+ TYPE_MAIN_VARIANT (sizetype) = sizetype;
+
+ t = make_node (INTEGER_TYPE);
+ TYPE_NAME (t) = get_identifier ("bit_size_type");
+ /* We do want to use bitsizetype's cache, as we will be replacing that
+ type. */
+ TYPE_CACHED_VALUES (t) = TYPE_CACHED_VALUES (bitsizetype);
+ TYPE_CACHED_VALUES_P (t) = TYPE_CACHED_VALUES_P (bitsizetype);
+ TYPE_PRECISION (t) = precision;
+ TYPE_UID (t) = TYPE_UID (bitsizetype);
+ TYPE_IS_SIZETYPE (t) = 1;
+ /* Replace our original stub bitsizetype. */
+ memcpy (bitsizetype, t, tree_size (bitsizetype));
+
+ if (TYPE_UNSIGNED (type))
{
- usizetype = sizetype;
- ubitsizetype = bitsizetype;
- ssizetype = copy_node (make_signed_type (oprecision));
- sbitsizetype = copy_node (make_signed_type (precision));
+ fixup_unsigned_type (bitsizetype);
+ ssizetype = build_distinct_type_copy (make_signed_type (oprecision));
+ TYPE_IS_SIZETYPE (ssizetype) = 1;
+ sbitsizetype = build_distinct_type_copy (make_signed_type (precision));
+ TYPE_IS_SIZETYPE (sbitsizetype) = 1;
}
else
{
+ fixup_signed_type (bitsizetype);
ssizetype = sizetype;
sbitsizetype = bitsizetype;
- usizetype = copy_node (make_unsigned_type (oprecision));
- ubitsizetype = copy_node (make_unsigned_type (precision));
}
+}
+\f
+/* TYPE is an integral type, i.e., an INTEGRAL_TYPE, ENUMERAL_TYPE,
+ BOOLEAN_TYPE, or CHAR_TYPE. Set TYPE_MIN_VALUE and TYPE_MAX_VALUE
+ for TYPE, based on the PRECISION and whether or not the TYPE
+ IS_UNSIGNED. PRECISION need not correspond to a width supported
+ natively by the hardware; for example, on a machine with 8-bit,
+ 16-bit, and 32-bit register modes, PRECISION might be 7, 23, or
+ 61. */
- TYPE_NAME (bitsizetype) = get_identifier ("bit_size_type");
+void
+set_min_and_max_values_for_integral_type (tree type,
+ int precision,
+ bool is_unsigned)
+{
+ tree min_value;
+ tree max_value;
- /* Show is a sizetype, is a main type, and has no pointers to it. */
- for (i = 0; i < ARRAY_SIZE (sizetype_tab); i++)
+ if (is_unsigned)
{
- TYPE_IS_SIZETYPE (sizetype_tab[i]) = 1;
- TYPE_MAIN_VARIANT (sizetype_tab[i]) = sizetype_tab[i];
- TYPE_NEXT_VARIANT (sizetype_tab[i]) = 0;
- TYPE_POINTER_TO (sizetype_tab[i]) = 0;
- TYPE_REFERENCE_TO (sizetype_tab[i]) = 0;
+ min_value = build_int_cst (type, 0);
+ max_value
+ = build_int_cst_wide (type, precision - HOST_BITS_PER_WIDE_INT >= 0
+ ? -1
+ : ((HOST_WIDE_INT) 1 << precision) - 1,
+ precision - HOST_BITS_PER_WIDE_INT > 0
+ ? ((unsigned HOST_WIDE_INT) ~0
+ >> (HOST_BITS_PER_WIDE_INT
+ - (precision - HOST_BITS_PER_WIDE_INT)))
+ : 0);
}
-
- /* Go down each of the types we already made and set the proper type
- for the sizes in them. */
- for (t = early_type_list; t != 0; t = TREE_CHAIN (t))
+ else
{
- if (TREE_CODE (TREE_VALUE (t)) != INTEGER_TYPE)
- abort ();
-
- TREE_TYPE (TYPE_SIZE (TREE_VALUE (t))) = bitsizetype;
- TREE_TYPE (TYPE_SIZE_UNIT (TREE_VALUE (t))) = sizetype;
+ min_value
+ = build_int_cst_wide (type,
+ (precision - HOST_BITS_PER_WIDE_INT > 0
+ ? 0
+ : (HOST_WIDE_INT) (-1) << (precision - 1)),
+ (((HOST_WIDE_INT) (-1)
+ << (precision - HOST_BITS_PER_WIDE_INT - 1 > 0
+ ? precision - HOST_BITS_PER_WIDE_INT - 1
+ : 0))));
+ max_value
+ = build_int_cst_wide (type,
+ (precision - HOST_BITS_PER_WIDE_INT > 0
+ ? -1
+ : ((HOST_WIDE_INT) 1 << (precision - 1)) - 1),
+ (precision - HOST_BITS_PER_WIDE_INT - 1 > 0
+ ? (((HOST_WIDE_INT) 1
+ << (precision - HOST_BITS_PER_WIDE_INT - 1))) - 1
+ : 0));
}
- early_type_list = 0;
- sizetype_set = 1;
+ TYPE_MIN_VALUE (type) = min_value;
+ TYPE_MAX_VALUE (type) = max_value;
}
-\f
+
/* Set the extreme values of TYPE based on its precision in bits,
then lay it out. Used when make_signed_type won't do
because the tree code is not INTEGER_TYPE.
E.g. for Pascal, when the -fsigned-char option is given. */
void
-fixup_signed_type (type)
- tree type;
+fixup_signed_type (tree type)
{
int precision = TYPE_PRECISION (type);
if (precision > HOST_BITS_PER_WIDE_INT * 2)
precision = HOST_BITS_PER_WIDE_INT * 2;
- TYPE_MIN_VALUE (type)
- = build_int_2 ((precision - HOST_BITS_PER_WIDE_INT > 0
- ? 0 : (HOST_WIDE_INT) (-1) << (precision - 1)),
- (((HOST_WIDE_INT) (-1)
- << (precision - HOST_BITS_PER_WIDE_INT - 1 > 0
- ? precision - HOST_BITS_PER_WIDE_INT - 1
- : 0))));
- TYPE_MAX_VALUE (type)
- = build_int_2 ((precision - HOST_BITS_PER_WIDE_INT > 0
- ? -1 : ((HOST_WIDE_INT) 1 << (precision - 1)) - 1),
- (precision - HOST_BITS_PER_WIDE_INT - 1 > 0
- ? (((HOST_WIDE_INT) 1
- << (precision - HOST_BITS_PER_WIDE_INT - 1))) - 1
- : 0));
-
- TREE_TYPE (TYPE_MIN_VALUE (type)) = type;
- TREE_TYPE (TYPE_MAX_VALUE (type)) = type;
+ set_min_and_max_values_for_integral_type (type, precision,
+ /*is_unsigned=*/false);
/* Lay out the type: set its alignment, size, etc. */
layout_type (type);
and for enumeral types. */
void
-fixup_unsigned_type (type)
- tree type;
+fixup_unsigned_type (tree type)
{
int precision = TYPE_PRECISION (type);
if (precision > HOST_BITS_PER_WIDE_INT * 2)
precision = HOST_BITS_PER_WIDE_INT * 2;
- TYPE_MIN_VALUE (type) = build_int_2 (0, 0);
- TYPE_MAX_VALUE (type)
- = build_int_2 (precision - HOST_BITS_PER_WIDE_INT >= 0
- ? -1 : ((HOST_WIDE_INT) 1 << precision) - 1,
- precision - HOST_BITS_PER_WIDE_INT > 0
- ? ((unsigned HOST_WIDE_INT) ~0
- >> (HOST_BITS_PER_WIDE_INT
- - (precision - HOST_BITS_PER_WIDE_INT)))
- : 0);
- TREE_TYPE (TYPE_MIN_VALUE (type)) = type;
- TREE_TYPE (TYPE_MAX_VALUE (type)) = type;
+ TYPE_UNSIGNED (type) = 1;
+
+ set_min_and_max_values_for_integral_type (type, precision,
+ /*is_unsigned=*/true);
/* Lay out the type: set its alignment, size, etc. */
layout_type (type);
all the conditions. */
enum machine_mode
-get_best_mode (bitsize, bitpos, align, largest_mode, volatilep)
- int bitsize, bitpos;
- unsigned int align;
- enum machine_mode largest_mode;
- int volatilep;
+get_best_mode (int bitsize, int bitpos, unsigned int align,
+ enum machine_mode largest_mode, int volatilep)
{
enum machine_mode mode;
unsigned int unit = 0;
return mode;
}
+/* Gets minimal and maximal values for MODE (signed or unsigned depending on
+ SIGN). The returned constants are made to be usable in TARGET_MODE. */
+
+void
+get_mode_bounds (enum machine_mode mode, int sign,
+ enum machine_mode target_mode,
+ rtx *mmin, rtx *mmax)
+{
+ unsigned size = GET_MODE_BITSIZE (mode);
+ unsigned HOST_WIDE_INT min_val, max_val;
+
+ gcc_assert (size <= HOST_BITS_PER_WIDE_INT);
+
+ if (sign)
+ {
+ min_val = -((unsigned HOST_WIDE_INT) 1 << (size - 1));
+ max_val = ((unsigned HOST_WIDE_INT) 1 << (size - 1)) - 1;
+ }
+ else
+ {
+ min_val = 0;
+ max_val = ((unsigned HOST_WIDE_INT) 1 << (size - 1) << 1) - 1;
+ }
+
+ *mmin = gen_int_mode (min_val, target_mode);
+ *mmax = gen_int_mode (max_val, target_mode);
+}
+
#include "gt-stor-layout.h"