#define HWI_SIGN_EXTEND(low) \
((((HOST_WIDE_INT) low) < 0) ? ((HOST_WIDE_INT) -1) : ((HOST_WIDE_INT) 0))
+static rtx neg_const_int PARAMS ((enum machine_mode, rtx));
+static int simplify_plus_minus_op_data_cmp PARAMS ((const void *,
+ const void *));
static rtx simplify_plus_minus PARAMS ((enum rtx_code,
enum machine_mode, rtx, rtx));
static void check_fold_consts PARAMS ((PTR));
static void simplify_binary_is2orm1 PARAMS ((PTR));
\f
+/* Negate a CONST_INT rtx, truncating (because a conversion from a
+ maximally negative number can overflow). */
+static rtx
+neg_const_int (mode, i)
+ enum machine_mode mode;
+ rtx i;
+{
+ return GEN_INT (trunc_int_for_mode (- INTVAL (i), mode));
+}
+
+\f
/* Make a binary operation by properly ordering the operands and
seeing if the expression folds. */
/* Handle addition and subtraction of CONST_INT specially. Otherwise,
just form the operation. */
- if (code == PLUS && GET_CODE (op1) == CONST_INT
- && GET_MODE (op0) != VOIDmode)
- return plus_constant (op0, INTVAL (op1));
- else if (code == MINUS && GET_CODE (op1) == CONST_INT
- && GET_MODE (op0) != VOIDmode)
- return plus_constant (op0, - INTVAL (op1));
+ if (GET_CODE (op1) == CONST_INT
+ && GET_MODE (op0) != VOIDmode
+ && (code == PLUS || code == MINUS))
+ {
+ if (code == MINUS)
+ op1 = neg_const_int (mode, op1);
+ return plus_constant (op0, INTVAL (op1));
+ }
else
return gen_rtx_fmt_ee (code, mode, op0, op1);
}
if (GET_CODE (trueop) == CONST_INT
&& width <= HOST_BITS_PER_WIDE_INT && width > 0)
{
- register HOST_WIDE_INT arg0 = INTVAL (trueop);
- register HOST_WIDE_INT val;
+ HOST_WIDE_INT arg0 = INTVAL (trueop);
+ HOST_WIDE_INT val;
switch (code)
{
case SQRT:
case FLOAT_EXTEND:
case FLOAT_TRUNCATE:
+ case SS_TRUNCATE:
+ case US_TRUNCATE:
return 0;
default:
enum machine_mode mode;
rtx op0, op1;
{
- register HOST_WIDE_INT arg0, arg1, arg0s, arg1s;
+ HOST_WIDE_INT arg0, arg1, arg0s, arg1s;
HOST_WIDE_INT val;
unsigned int width = GET_MODE_BITSIZE (mode);
rtx tem;
if (INTEGRAL_MODE_P (mode)
&& (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS
- || GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS)
+ || GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS
+ || (GET_CODE (op0) == CONST
+ && GET_CODE (XEXP (op0, 0)) == PLUS)
+ || (GET_CODE (op1) == CONST
+ && GET_CODE (XEXP (op1, 0)) == PLUS))
&& (tem = simplify_plus_minus (code, mode, op0, op1)) != 0)
return tem;
break;
#endif
return xop00;
}
-
break;
+
case MINUS:
/* None of these optimizations can be done for IEEE
floating point. */
if (INTEGRAL_MODE_P (mode)
&& (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS
- || GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS)
+ || GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS
+ || (GET_CODE (op0) == CONST
+ && GET_CODE (XEXP (op0, 0)) == PLUS)
+ || (GET_CODE (op1) == CONST
+ && GET_CODE (XEXP (op1, 0)) == PLUS))
&& (tem = simplify_plus_minus (code, mode, op0, op1)) != 0)
return tem;
/* Don't let a relocatable value get a negative coeff. */
if (GET_CODE (op1) == CONST_INT && GET_MODE (op0) != VOIDmode)
- return plus_constant (op0, - INTVAL (op1));
+ return simplify_gen_binary (PLUS, mode,
+ op0,
+ neg_const_int (mode, op1));
/* (x - (x & y)) -> (x & ~y) */
if (GET_CODE (op1) == AND)
return simplify_gen_binary (AND, mode, op0,
gen_rtx_NOT (mode, XEXP (op1, 0)));
}
-
- /* Simplify operations with constants containing embedded offsets. */
- if (GET_CODE (op0) == CONST)
- {
- tem = simplify_binary_operation (code, mode, XEXP (op0, 0), op1);
- if (tem)
- {
- if (CONSTANT_P (op1) && ! CONSTANT_P (tem))
- tem = gen_rtx_CONST (mode, tem);
- return tem;
- }
- }
- if (GET_CODE (op1) == CONST)
- {
- tem = simplify_binary_operation (code, mode, op0, XEXP (op1, 0));
- if (tem)
- {
- if (CONSTANT_P (op0) && ! CONSTANT_P (tem))
- tem = gen_rtx_CONST (mode, tem);
- return tem;
- }
- }
break;
case MULT:
case DIV:
if (trueop1 == CONST1_RTX (mode))
- return op0;
+ {
+ /* On some platforms DIV uses narrower mode than its
+ operands. */
+ rtx x = gen_lowpart_common (mode, op0);
+ if (x)
+ return x;
+ else if (mode != GET_MODE (op0) && GET_MODE (op0) != VOIDmode)
+ return gen_lowpart_SUBREG (mode, op0);
+ else
+ return op0;
+ }
/* In IEEE floating point, 0/x is not always 0. */
if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT
return op0;
break;
+ case SS_PLUS:
+ case US_PLUS:
+ case SS_MINUS:
+ case US_MINUS:
+ /* ??? There are simplifications that can be done. */
+ return 0;
+
default:
abort ();
}
and do all possible simplifications until no more changes occur. Then
we rebuild the operation. */
+struct simplify_plus_minus_op_data
+{
+ rtx op;
+ int neg;
+};
+
+static int
+simplify_plus_minus_op_data_cmp (p1, p2)
+ const void *p1;
+ const void *p2;
+{
+ const struct simplify_plus_minus_op_data *d1 = p1;
+ const struct simplify_plus_minus_op_data *d2 = p2;
+
+ return (commutative_operand_precedence (d2->op)
+ - commutative_operand_precedence (d1->op));
+}
+
static rtx
simplify_plus_minus (code, mode, op0, op1)
enum rtx_code code;
enum machine_mode mode;
rtx op0, op1;
{
- rtx ops[8];
- int negs[8];
+ struct simplify_plus_minus_op_data ops[8];
rtx result, tem;
- int n_ops = 2, input_ops = 2, input_consts = 0, n_consts = 0;
- int first = 1, negate = 0, changed;
+ int n_ops = 2, input_ops = 2, input_consts = 0, n_consts;
+ int first, negate, changed;
int i, j;
memset ((char *) ops, 0, sizeof ops);
changed. If we run out of room in our array, give up; this should
almost never happen. */
- ops[0] = op0, ops[1] = op1, negs[0] = 0, negs[1] = (code == MINUS);
+ ops[0].op = op0;
+ ops[0].neg = 0;
+ ops[1].op = op1;
+ ops[1].neg = (code == MINUS);
- changed = 1;
- while (changed)
+ do
{
changed = 0;
for (i = 0; i < n_ops; i++)
- switch (GET_CODE (ops[i]))
- {
- case PLUS:
- case MINUS:
- if (n_ops == 7)
- return 0;
-
- ops[n_ops] = XEXP (ops[i], 1);
- negs[n_ops++] = GET_CODE (ops[i]) == MINUS ? !negs[i] : negs[i];
- ops[i] = XEXP (ops[i], 0);
- input_ops++;
- changed = 1;
- break;
-
- case NEG:
- ops[i] = XEXP (ops[i], 0);
- negs[i] = ! negs[i];
- changed = 1;
- break;
+ {
+ rtx this_op = ops[i].op;
+ int this_neg = ops[i].neg;
+ enum rtx_code this_code = GET_CODE (this_op);
- case CONST:
- ops[i] = XEXP (ops[i], 0);
- input_consts++;
- changed = 1;
- break;
+ switch (this_code)
+ {
+ case PLUS:
+ case MINUS:
+ if (n_ops == 7)
+ return 0;
- case NOT:
- /* ~a -> (-a - 1) */
- if (n_ops != 7)
- {
- ops[n_ops] = constm1_rtx;
- negs[n_ops++] = negs[i];
- ops[i] = XEXP (ops[i], 0);
- negs[i] = ! negs[i];
- changed = 1;
- }
- break;
+ ops[n_ops].op = XEXP (this_op, 1);
+ ops[n_ops].neg = (this_code == MINUS) ^ this_neg;
+ n_ops++;
+
+ ops[i].op = XEXP (this_op, 0);
+ input_ops++;
+ changed = 1;
+ break;
+
+ case NEG:
+ ops[i].op = XEXP (this_op, 0);
+ ops[i].neg = ! this_neg;
+ changed = 1;
+ break;
+
+ case CONST:
+ ops[i].op = XEXP (this_op, 0);
+ input_consts++;
+ changed = 1;
+ break;
+
+ case NOT:
+ /* ~a -> (-a - 1) */
+ if (n_ops != 7)
+ {
+ ops[n_ops].op = constm1_rtx;
+ ops[n_ops++].neg = this_neg;
+ ops[i].op = XEXP (this_op, 0);
+ ops[i].neg = !this_neg;
+ changed = 1;
+ }
+ break;
- case CONST_INT:
- if (negs[i])
- ops[i] = GEN_INT (- INTVAL (ops[i])), negs[i] = 0, changed = 1;
- break;
+ case CONST_INT:
+ if (this_neg)
+ {
+ ops[i].op = neg_const_int (mode, this_op);
+ ops[i].neg = 0;
+ changed = 1;
+ }
+ break;
- default:
- break;
- }
+ default:
+ break;
+ }
+ }
}
+ while (changed);
/* If we only have two operands, we can't do anything. */
if (n_ops <= 2)
- return 0;
+ return NULL_RTX;
/* Now simplify each pair of operands until nothing changes. The first
time through just simplify constants against each other. */
- changed = 1;
- while (changed)
+ first = 1;
+ do
{
changed = first;
for (i = 0; i < n_ops - 1; i++)
for (j = i + 1; j < n_ops; j++)
- if (ops[i] != 0 && ops[j] != 0
- && (! first || (CONSTANT_P (ops[i]) && CONSTANT_P (ops[j]))))
- {
- rtx lhs = ops[i], rhs = ops[j];
- enum rtx_code ncode = PLUS;
-
- if (negs[i] && ! negs[j])
- lhs = ops[j], rhs = ops[i], ncode = MINUS;
- else if (! negs[i] && negs[j])
- ncode = MINUS;
-
- tem = simplify_binary_operation (ncode, mode, lhs, rhs);
- if (tem)
- {
- ops[i] = tem, ops[j] = 0;
- negs[i] = negs[i] && negs[j];
- if (GET_CODE (tem) == NEG)
- ops[i] = XEXP (tem, 0), negs[i] = ! negs[i];
+ {
+ rtx lhs = ops[i].op, rhs = ops[j].op;
+ int lneg = ops[i].neg, rneg = ops[j].neg;
- if (GET_CODE (ops[i]) == CONST_INT && negs[i])
- ops[i] = GEN_INT (- INTVAL (ops[i])), negs[i] = 0;
- changed = 1;
- }
- }
+ if (lhs != 0 && rhs != 0
+ && (! first || (CONSTANT_P (lhs) && CONSTANT_P (rhs))))
+ {
+ enum rtx_code ncode = PLUS;
+
+ if (lneg != rneg)
+ {
+ ncode = MINUS;
+ if (lneg)
+ tem = lhs, lhs = rhs, rhs = tem;
+ }
+ else if (swap_commutative_operands_p (lhs, rhs))
+ tem = lhs, lhs = rhs, rhs = tem;
+
+ tem = simplify_binary_operation (ncode, mode, lhs, rhs);
+
+ /* Reject "simplifications" that just wrap the two
+ arguments in a CONST. Failure to do so can result
+ in infinite recursion with simplify_binary_operation
+ when it calls us to simplify CONST operations. */
+ if (tem
+ && ! (GET_CODE (tem) == CONST
+ && GET_CODE (XEXP (tem, 0)) == ncode
+ && XEXP (XEXP (tem, 0), 0) == lhs
+ && XEXP (XEXP (tem, 0), 1) == rhs)
+ /* Don't allow -x + -1 -> ~x simplifications in the
+ first pass. This allows us the chance to combine
+ the -1 with other constants. */
+ && ! (first
+ && GET_CODE (tem) == NOT
+ && XEXP (tem, 0) == rhs))
+ {
+ lneg &= rneg;
+ if (GET_CODE (tem) == NEG)
+ tem = XEXP (tem, 0), lneg = !lneg;
+ if (GET_CODE (tem) == CONST_INT && lneg)
+ tem = neg_const_int (mode, tem), lneg = 0;
+
+ ops[i].op = tem;
+ ops[i].neg = lneg;
+ ops[j].op = NULL_RTX;
+ changed = 1;
+ }
+ }
+ }
first = 0;
}
+ while (changed);
- /* Pack all the operands to the lower-numbered entries and give up if
- we didn't reduce the number of operands we had. Make sure we
- count a CONST as two operands. If we have the same number of
- operands, but have made more CONSTs than we had, this is also
- an improvement, so accept it. */
-
+ /* Pack all the operands to the lower-numbered entries. */
for (i = 0, j = 0; j < n_ops; j++)
- if (ops[j] != 0)
- {
- ops[i] = ops[j], negs[i++] = negs[j];
- if (GET_CODE (ops[j]) == CONST)
- n_consts++;
- }
+ if (ops[j].op)
+ ops[i++] = ops[j];
+ n_ops = i;
- if (i + n_consts > input_ops
- || (i + n_consts == input_ops && n_consts <= input_consts))
- return 0;
+ /* Sort the operations based on swap_commutative_operands_p. */
+ qsort (ops, n_ops, sizeof (*ops), simplify_plus_minus_op_data_cmp);
- n_ops = i;
+ /* We suppressed creation of trivial CONST expressions in the
+ combination loop to avoid recursion. Create one manually now.
+ The combination loop should have ensured that there is exactly
+ one CONST_INT, and the sort will have ensured that it is last
+ in the array and that any other constant will be next-to-last. */
- /* If we have a CONST_INT, put it last. */
- for (i = 0; i < n_ops - 1; i++)
- if (GET_CODE (ops[i]) == CONST_INT)
- {
- tem = ops[n_ops - 1], ops[n_ops - 1] = ops[i] , ops[i] = tem;
- j = negs[n_ops - 1], negs[n_ops - 1] = negs[i], negs[i] = j;
- }
+ if (n_ops > 1
+ && GET_CODE (ops[n_ops - 1].op) == CONST_INT
+ && CONSTANT_P (ops[n_ops - 2].op))
+ {
+ rtx value = ops[n_ops - 1].op;
+ if (ops[n_ops - 1].neg ^ ops[n_ops - 2].neg)
+ value = neg_const_int (mode, value);
+ ops[n_ops - 2].op = plus_constant (ops[n_ops - 2].op, INTVAL (value));
+ n_ops--;
+ }
+
+ /* Count the number of CONSTs that we generated. */
+ n_consts = 0;
+ for (i = 0; i < n_ops; i++)
+ if (GET_CODE (ops[i].op) == CONST)
+ n_consts++;
+
+ /* Give up if we didn't reduce the number of operands we had. Make
+ sure we count a CONST as two operands. If we have the same
+ number of operands, but have made more CONSTs than before, this
+ is also an improvement, so accept it. */
+ if (n_ops + n_consts > input_ops
+ || (n_ops + n_consts == input_ops && n_consts <= input_consts))
+ return NULL_RTX;
/* Put a non-negated operand first. If there aren't any, make all
operands positive and negate the whole thing later. */
- for (i = 0; i < n_ops && negs[i]; i++)
- ;
+ negate = 0;
+ for (i = 0; i < n_ops && ops[i].neg; i++)
+ continue;
if (i == n_ops)
{
for (i = 0; i < n_ops; i++)
- negs[i] = 0;
+ ops[i].neg = 0;
negate = 1;
}
else if (i != 0)
{
- tem = ops[0], ops[0] = ops[i], ops[i] = tem;
- j = negs[0], negs[0] = negs[i], negs[i] = j;
+ tem = ops[0].op;
+ ops[0] = ops[i];
+ ops[i].op = tem;
+ ops[i].neg = 1;
}
/* Now make the result by performing the requested operations. */
- result = ops[0];
+ result = ops[0].op;
for (i = 1; i < n_ops; i++)
- result = simplify_gen_binary (negs[i] ? MINUS : PLUS, mode, result, ops[i]);
+ result = gen_rtx_fmt_ee (ops[i].neg ? MINUS : PLUS,
+ mode, result, ops[i].op);
return negate ? gen_rtx_NEG (mode, result) : result;
}
arguments are passed on 32-bit Sparc and should be fixed. */
if (HARD_REGNO_MODE_OK (final_regno, outermode)
|| ! HARD_REGNO_MODE_OK (REGNO (op), innermode))
- return gen_rtx_REG (outermode, final_regno);
+ {
+ rtx x = gen_rtx_REG (outermode, final_regno);
+
+ /* Propagate original regno. We don't have any way to specify
+ the offset inside orignal regno, so do so only for lowpart.
+ The information is used only by alias analysis that can not
+ grog partial register anyway. */
+
+ if (subreg_lowpart_offset (outermode, innermode) == byte)
+ ORIGINAL_REGNO (x) = ORIGINAL_REGNO (op);
+ return x;
+ }
}
/* If we have a SUBREG of a register that we are replacing and we are
res = simplify_subreg (outermode, part, GET_MODE (part), final_offset);
if (res)
return res;
- /* We can at least simplify it by referring directly to the relevent part. */
+ /* We can at least simplify it by referring directly to the relevant part. */
return gen_rtx_SUBREG (outermode, part, final_offset);
}
OSDN Git Service
