/* This file contains the definitions and documentation for the
Register Transfer Expressions (rtx's) that make up the
Register Transfer Language (rtl) used in the Back End of the GNU compiler.
- Copyright (C) 1987, 88, 92, 94, 95, 97, 98, 1999, 2000
+ Copyright (C) 1987, 1988, 1992, 1994, 1995, 1997, 1998, 1999, 2000, 2004,
+ 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/* Expression definitions and descriptions for all targets are in this file.
3. The print format, and type of each rtx->u.fld[] (field) in this rtx.
These formats are stored in rtx_format[].
The meaning of the formats is documented in front of this array in rtl.c
-
+
4. The class of the rtx. These are stored in rtx_class and are accessed
via the GET_RTX_CLASS macro. They are defined as follows:
- "o" an rtx code that can be used to represent an object (e.g, REG, MEM)
- "<" an rtx code for a comparison (e.g, EQ, NE, LT)
- "1" an rtx code for a unary arithmetic expression (e.g, NEG, NOT)
- "c" an rtx code for a commutative binary operation (e.g,, PLUS, MULT)
- "3" an rtx code for a non-bitfield three input operation (IF_THEN_ELSE)
- "2" an rtx code for a non-commutative binary operation (e.g., MINUS, DIV)
- "b" an rtx code for a bit-field operation (ZERO_EXTRACT, SIGN_EXTRACT)
- "i" an rtx code for a machine insn (INSN, JUMP_INSN, CALL_INSN)
- "m" an rtx code for something that matches in insns (e.g, MATCH_DUP)
- "g" an rtx code for grouping insns together (e.g, GROUP_PARALLEL)
- "a" an rtx code for autoincrement addressing modes (e.g. POST_DEC)
- "x" everything else
-
- */
+ RTX_CONST_OBJ
+ an rtx code that can be used to represent a constant object
+ (e.g, CONST_INT)
+ RTX_OBJ
+ an rtx code that can be used to represent an object (e.g, REG, MEM)
+ RTX_COMPARE
+ an rtx code for a comparison (e.g, LT, GT)
+ RTX_COMM_COMPARE
+ an rtx code for a commutative comparison (e.g, EQ, NE, ORDERED)
+ RTX_UNARY
+ an rtx code for a unary arithmetic expression (e.g, NEG, NOT)
+ RTX_COMM_ARITH
+ an rtx code for a commutative binary operation (e.g,, PLUS, MULT)
+ RTX_TERNARY
+ an rtx code for a non-bitfield three input operation (IF_THEN_ELSE)
+ RTX_BIN_ARITH
+ an rtx code for a non-commutative binary operation (e.g., MINUS, DIV)
+ RTX_BITFIELD_OPS
+ an rtx code for a bit-field operation (ZERO_EXTRACT, SIGN_EXTRACT)
+ RTX_INSN
+ an rtx code for a machine insn (INSN, JUMP_INSN, CALL_INSN)
+ RTX_MATCH
+ an rtx code for something that matches in insns (e.g, MATCH_DUP)
+ RTX_AUTOINC
+ an rtx code for autoincrement addressing modes (e.g. POST_DEC)
+ RTX_EXTRA
+ everything else
+
+ All of the expressions that appear only in machine descriptions,
+ not in RTL used by the compiler itself, are at the end of the file. */
+
+/* Unknown, or no such operation; the enumeration constant should have
+ value zero. */
+DEF_RTL_EXPR(UNKNOWN, "UnKnown", "*", RTX_EXTRA)
+
+/* Used in the cselib routines to describe a value. Objects of this
+ kind are only allocated in cselib.c, in an alloc pool instead of in
+ GC memory. The only operand of a VALUE is a cselib_val_struct.
+ var-tracking requires this to have a distinct integral value from
+ DECL codes in trees. */
+DEF_RTL_EXPR(VALUE, "value", "0", RTX_OBJ)
+
+/* The RTL generated for a DEBUG_EXPR_DECL. It links back to the
+ DEBUG_EXPR_DECL in the first operand. */
+DEF_RTL_EXPR(DEBUG_EXPR, "debug_expr", "0", RTX_OBJ)
/* ---------------------------------------------------------------------
- Expressions (and "meta" expressions) used for structuring the
- rtl representation of a program.
+ Expressions used in constructing lists.
--------------------------------------------------------------------- */
-/* an expression code name unknown to the reader */
-DEF_RTL_EXPR(UNKNOWN, "UnKnown", "*", 'x')
+/* a linked list of expressions */
+DEF_RTL_EXPR(EXPR_LIST, "expr_list", "ee", RTX_EXTRA)
+
+/* a linked list of instructions.
+ The insns are represented in print by their uids. */
+DEF_RTL_EXPR(INSN_LIST, "insn_list", "ue", RTX_EXTRA)
+
+/* SEQUENCE appears in the result of a `gen_...' function
+ for a DEFINE_EXPAND that wants to make several insns.
+ Its elements are the bodies of the insns that should be made.
+ `emit_insn' takes the SEQUENCE apart and makes separate insns. */
+DEF_RTL_EXPR(SEQUENCE, "sequence", "E", RTX_EXTRA)
-/* (NIL) is used by rtl reader and printer to represent a null pointer. */
+/* Refers to the address of its argument. This is only used in alias.c. */
+DEF_RTL_EXPR(ADDRESS, "address", "e", RTX_MATCH)
-DEF_RTL_EXPR(NIL, "nil", "*", 'x')
+/* ----------------------------------------------------------------------
+ Expression types used for things in the instruction chain.
+ All formats must start with "iuu" to handle the chain.
+ Each insn expression holds an rtl instruction and its semantics
+ during back-end processing.
+ See macros's in "rtl.h" for the meaning of each rtx->u.fld[].
-/* include a file */
+ ---------------------------------------------------------------------- */
-DEF_RTL_EXPR(INCLUDE, "include", "s", 'x')
+/* An annotation for variable assignment tracking. */
+DEF_RTL_EXPR(DEBUG_INSN, "debug_insn", "iuuBieie", RTX_INSN)
-/* ---------------------------------------------------------------------
- Expressions used in constructing lists.
- --------------------------------------------------------------------- */
+/* An instruction that cannot jump. */
+DEF_RTL_EXPR(INSN, "insn", "iuuBieie", RTX_INSN)
-/* a linked list of expressions */
-DEF_RTL_EXPR(EXPR_LIST, "expr_list", "ee", 'x')
+/* An instruction that can possibly jump.
+ Fields ( rtx->u.fld[] ) have exact same meaning as INSN's. */
+DEF_RTL_EXPR(JUMP_INSN, "jump_insn", "iuuBieie0", RTX_INSN)
-/* a linked list of instructions.
- The insns are represented in print by their uids. */
-DEF_RTL_EXPR(INSN_LIST, "insn_list", "ue", 'x')
+/* An instruction that can possibly call a subroutine
+ but which will not change which instruction comes next
+ in the current function.
+ Field ( rtx->u.fld[8] ) is CALL_INSN_FUNCTION_USAGE.
+ All other fields ( rtx->u.fld[] ) have exact same meaning as INSN's. */
+DEF_RTL_EXPR(CALL_INSN, "call_insn", "iuuBieiee", RTX_INSN)
+
+/* A marker that indicates that control will not flow through. */
+DEF_RTL_EXPR(BARRIER, "barrier", "iuu00000", RTX_EXTRA)
+
+/* Holds a label that is followed by instructions.
+ Operand:
+ 4: is used in jump.c for the use-count of the label.
+ 5: is used in the sh backend.
+ 6: is a number that is unique in the entire compilation.
+ 7: is the user-given name of the label, if any. */
+DEF_RTL_EXPR(CODE_LABEL, "code_label", "iuuB00is", RTX_EXTRA)
+
+/* Say where in the code a source line starts, for symbol table's sake.
+ Operand:
+ 4: note-specific data
+ 5: enum insn_note
+ 6: unique number if insn_note == note_insn_deleted_label. */
+DEF_RTL_EXPR(NOTE, "note", "iuuB0ni", RTX_EXTRA)
/* ----------------------------------------------------------------------
- Expression types for machine descriptions.
- These do not appear in actual rtl code in the compiler.
+ Top level constituents of INSN, JUMP_INSN and CALL_INSN.
---------------------------------------------------------------------- */
-/* Appears only in machine descriptions.
- Means use the function named by the second arg (the string)
- as a predicate; if matched, store the structure that was matched
- in the operand table at index specified by the first arg (the integer).
- If the second arg is the null string, the structure is just stored.
+/* Conditionally execute code.
+ Operand 0 is the condition that if true, the code is executed.
+ Operand 1 is the code to be executed (typically a SET).
- A third string argument indicates to the register allocator restrictions
- on where the operand can be allocated.
+ Semantics are that there are no side effects if the condition
+ is false. This pattern is created automatically by the if_convert
+ pass run after reload or by target-specific splitters. */
+DEF_RTL_EXPR(COND_EXEC, "cond_exec", "ee", RTX_EXTRA)
- If the target needs no restriction on any instruction this field should
- be the null string.
+/* Several operations to be done in parallel (perhaps under COND_EXEC). */
+DEF_RTL_EXPR(PARALLEL, "parallel", "E", RTX_EXTRA)
- The string is prepended by:
- '=' to indicate the operand is only written to.
- '+' to indicate the operand is both read and written to.
+/* A string that is passed through to the assembler as input.
+ One can obviously pass comments through by using the
+ assembler comment syntax.
+ These occur in an insn all by themselves as the PATTERN.
+ They also appear inside an ASM_OPERANDS
+ as a convenient way to hold a string. */
+DEF_RTL_EXPR(ASM_INPUT, "asm_input", "si", RTX_EXTRA)
- Each character in the string represents an allocable class for an operand.
- 'g' indicates the operand can be any valid class.
- 'i' indicates the operand can be immediate (in the instruction) data.
- 'r' indicates the operand can be in a register.
- 'm' indicates the operand can be in memory.
- 'o' a subset of the 'm' class. Those memory addressing modes that
- can be offset at compile time (have a constant added to them).
+/* An assembler instruction with operands.
+ 1st operand is the instruction template.
+ 2nd operand is the constraint for the output.
+ 3rd operand is the number of the output this expression refers to.
+ When an insn stores more than one value, a separate ASM_OPERANDS
+ is made for each output; this integer distinguishes them.
+ 4th is a vector of values of input operands.
+ 5th is a vector of modes and constraints for the input operands.
+ Each element is an ASM_INPUT containing a constraint string
+ and whose mode indicates the mode of the input operand.
+ 6th is a vector of labels that may be branched to by the asm.
+ 7th is the source line number. */
+DEF_RTL_EXPR(ASM_OPERANDS, "asm_operands", "ssiEEEi", RTX_EXTRA)
- Other characters indicate target dependent operand classes and
- are described in each target's machine description.
+/* A machine-specific operation.
+ 1st operand is a vector of operands being used by the operation so that
+ any needed reloads can be done.
+ 2nd operand is a unique value saying which of a number of machine-specific
+ operations is to be performed.
+ (Note that the vector must be the first operand because of the way that
+ genrecog.c record positions within an insn.)
- For instructions with more than one operand, sets of classes can be
- separated by a comma to indicate the appropriate multi-operand constraints.
- There must be a 1 to 1 correspondence between these sets of classes in
- all operands for an instruction.
+ UNSPEC can occur all by itself in a PATTERN, as a component of a PARALLEL,
+ or inside an expression.
+ UNSPEC by itself or as a component of a PARALLEL
+ is currently considered not deletable.
+
+ FIXME: Replace all uses of UNSPEC that appears by itself or as a component
+ of a PARALLEL with USE.
*/
-DEF_RTL_EXPR(MATCH_OPERAND, "match_operand", "iss", 'm')
+DEF_RTL_EXPR(UNSPEC, "unspec", "Ei", RTX_EXTRA)
-/* Appears only in machine descriptions.
- Means match a SCRATCH or a register. When used to generate rtl, a
- SCRATCH is generated. As for MATCH_OPERAND, the mode specifies
- the desired mode and the first argument is the operand number.
- The second argument is the constraint. */
-DEF_RTL_EXPR(MATCH_SCRATCH, "match_scratch", "is", 'm')
+/* Similar, but a volatile operation and one which may trap. */
+DEF_RTL_EXPR(UNSPEC_VOLATILE, "unspec_volatile", "Ei", RTX_EXTRA)
-/* Appears only in machine descriptions.
- Means match only something equal to what is stored in the operand table
- at the index specified by the argument. */
-DEF_RTL_EXPR(MATCH_DUP, "match_dup", "i", 'm')
+/* Vector of addresses, stored as full words. */
+/* Each element is a LABEL_REF to a CODE_LABEL whose address we want. */
+DEF_RTL_EXPR(ADDR_VEC, "addr_vec", "E", RTX_EXTRA)
-/* Appears only in machine descriptions.
- Means apply a predicate, AND match recursively the operands of the rtx.
- Operand 0 is the operand-number, as in match_operand.
- Operand 1 is a predicate to apply (as a string, a function name).
- Operand 2 is a vector of expressions, each of which must match
- one subexpression of the rtx this construct is matching. */
-DEF_RTL_EXPR(MATCH_OPERATOR, "match_operator", "isE", 'm')
+/* Vector of address differences X0 - BASE, X1 - BASE, ...
+ First operand is BASE; the vector contains the X's.
+ The machine mode of this rtx says how much space to leave
+ for each difference and is adjusted by branch shortening if
+ CASE_VECTOR_SHORTEN_MODE is defined.
+ The third and fourth operands store the target labels with the
+ minimum and maximum addresses respectively.
+ The fifth operand stores flags for use by branch shortening.
+ Set at the start of shorten_branches:
+ min_align: the minimum alignment for any of the target labels.
+ base_after_vec: true iff BASE is after the ADDR_DIFF_VEC.
+ min_after_vec: true iff minimum addr target label is after the ADDR_DIFF_VEC.
+ max_after_vec: true iff maximum addr target label is after the ADDR_DIFF_VEC.
+ min_after_base: true iff minimum address target label is after BASE.
+ max_after_base: true iff maximum address target label is after BASE.
+ Set by the actual branch shortening process:
+ offset_unsigned: true iff offsets have to be treated as unsigned.
+ scale: scaling that is necessary to make offsets fit into the mode.
-/* Appears only in machine descriptions.
- Means to match a PARALLEL of arbitrary length. The predicate is applied
- to the PARALLEL and the initial expressions in the PARALLEL are matched.
- Operand 0 is the operand-number, as in match_operand.
- Operand 1 is a predicate to apply to the PARALLEL.
- Operand 2 is a vector of expressions, each of which must match the
- corresponding element in the PARALLEL. */
-DEF_RTL_EXPR(MATCH_PARALLEL, "match_parallel", "isE", 'm')
+ The third, fourth and fifth operands are only valid when
+ CASE_VECTOR_SHORTEN_MODE is defined, and only in an optimizing
+ compilations. */
-/* Appears only in machine descriptions.
- Means match only something equal to what is stored in the operand table
- at the index specified by the argument. For MATCH_OPERATOR. */
-DEF_RTL_EXPR(MATCH_OP_DUP, "match_op_dup", "iE", 'm')
+DEF_RTL_EXPR(ADDR_DIFF_VEC, "addr_diff_vec", "eEee0", RTX_EXTRA)
-/* Appears only in machine descriptions.
- Means match only something equal to what is stored in the operand table
- at the index specified by the argument. For MATCH_PARALLEL. */
-DEF_RTL_EXPR(MATCH_PAR_DUP, "match_par_dup", "iE", 'm')
+/* Memory prefetch, with attributes supported on some targets.
+ Operand 1 is the address of the memory to fetch.
+ Operand 2 is 1 for a write access, 0 otherwise.
+ Operand 3 is the level of temporal locality; 0 means there is no
+ temporal locality and 1, 2, and 3 are for increasing levels of temporal
+ locality.
-/* Appears only in machine descriptions.
- Operand 0 is the operand number, as in match_operand.
- Operand 1 is the predicate to apply to the insn. */
-DEF_RTL_EXPR(MATCH_INSN, "match_insn", "is", 'm')
+ The attributes specified by operands 2 and 3 are ignored for targets
+ whose prefetch instructions do not support them. */
+DEF_RTL_EXPR(PREFETCH, "prefetch", "eee", RTX_EXTRA)
-/* Appears only in machine descriptions.
- Defines the pattern for one kind of instruction.
- Operand:
- 0: names this instruction.
- If the name is the null string, the instruction is in the
- machine description just to be recognized, and will never be emitted by
- the tree to rtl expander.
- 1: is the pattern.
- 2: is a string which is a C expression
- giving an additional condition for recognizing this pattern.
- A null string means no extra condition.
- 3: is the action to execute if this pattern is matched.
- If this assembler code template starts with a * then it is a fragment of
- C code to run to decide on a template to use. Otherwise, it is the
- template to use.
- 4: optionally, a vector of attributes for this insn.
- */
-DEF_RTL_EXPR(DEFINE_INSN, "define_insn", "sEsTV", 'x')
+/* ----------------------------------------------------------------------
+ At the top level of an instruction (perhaps under PARALLEL).
+ ---------------------------------------------------------------------- */
-/* Definition of a peephole optimization.
- 1st operand: vector of insn patterns to match
- 2nd operand: C expression that must be true
- 3rd operand: template or C code to produce assembler output.
- 4: optionally, a vector of attributes for this insn.
- */
-DEF_RTL_EXPR(DEFINE_PEEPHOLE, "define_peephole", "EsTV", 'x')
+/* Assignment.
+ Operand 1 is the location (REG, MEM, PC, CC0 or whatever) assigned to.
+ Operand 2 is the value stored there.
+ ALL assignment must use SET.
+ Instructions that do multiple assignments must use multiple SET,
+ under PARALLEL. */
+DEF_RTL_EXPR(SET, "set", "ee", RTX_EXTRA)
-/* Definition of a split operation.
- 1st operand: insn pattern to match
- 2nd operand: C expression that must be true
- 3rd operand: vector of insn patterns to place into a SEQUENCE
- 4th operand: optionally, some C code to execute before generating the
- insns. This might, for example, create some RTX's and store them in
- elements of `recog_data.operand' for use by the vector of
- insn-patterns.
- (`operands' is an alias here for `recog_data.operand'). */
-DEF_RTL_EXPR(DEFINE_SPLIT, "define_split", "EsES", 'x')
+/* Indicate something is used in a way that we don't want to explain.
+ For example, subroutine calls will use the register
+ in which the static chain is passed.
-/* Definition of an insn and associated split.
- This is the concatenation, with a few modifications, of a define_insn
- and a define_split which share the same pattern.
- Operand:
- 0: names this instruction.
- If the name is the null string, the instruction is in the
- machine description just to be recognized, and will never be emitted by
- the tree to rtl expander.
- 1: is the pattern.
- 2: is a string which is a C expression
- giving an additional condition for recognizing this pattern.
- A null string means no extra condition.
- 3: is the action to execute if this pattern is matched.
- If this assembler code template starts with a * then it is a fragment of
- C code to run to decide on a template to use. Otherwise, it is the
- template to use.
- 4: C expression that must be true for split. This may start with "&&"
- in which case the split condition is the logical and of the insn
- condition and what follows the "&&" of this operand.
- 5: vector of insn patterns to place into a SEQUENCE
- 6: optionally, some C code to execute before generating the
- insns. This might, for example, create some RTX's and store them in
- elements of `recog_data.operand' for use by the vector of
- insn-patterns.
- (`operands' is an alias here for `recog_data.operand').
- 7: optionally, a vector of attributes for this insn. */
-DEF_RTL_EXPR(DEFINE_INSN_AND_SPLIT, "define_insn_and_split", "sEsTsESV", 'x')
+ USE can not appear as an operand of other rtx except for PARALLEL.
+ USE is not deletable, as it indicates that the operand
+ is used in some unknown way. */
+DEF_RTL_EXPR(USE, "use", "e", RTX_EXTRA)
-/* Definition of an RTL peephole operation.
- Follows the same arguments as define_split. */
-DEF_RTL_EXPR(DEFINE_PEEPHOLE2, "define_peephole2", "EsES", 'x')
+/* Indicate something is clobbered in a way that we don't want to explain.
+ For example, subroutine calls will clobber some physical registers
+ (the ones that are by convention not saved).
-/* Definition of a combiner pattern.
- Operands not defined yet. */
-DEF_RTL_EXPR(DEFINE_COMBINE, "define_combine", "Ess", 'x')
+ CLOBBER can not appear as an operand of other rtx except for PARALLEL.
+ CLOBBER of a hard register appearing by itself (not within PARALLEL)
+ is considered undeletable before reload. */
+DEF_RTL_EXPR(CLOBBER, "clobber", "e", RTX_EXTRA)
-/* Define how to generate multiple insns for a standard insn name.
- 1st operand: the insn name.
- 2nd operand: vector of insn-patterns.
- Use match_operand to substitute an element of `recog_data.operand'.
- 3rd operand: C expression that must be true for this to be available.
- This may not test any operands.
- 4th operand: Extra C code to execute before generating the insns.
- This might, for example, create some RTX's and store them in
- elements of `recog_data.operand' for use by the vector of
- insn-patterns.
- (`operands' is an alias here for `recog_data.operand'). */
-DEF_RTL_EXPR(DEFINE_EXPAND, "define_expand", "sEss", 'x')
-
-/* Define a requirement for delay slots.
- 1st operand: Condition involving insn attributes that, if true,
- indicates that the insn requires the number of delay slots
- shown.
- 2nd operand: Vector whose length is the three times the number of delay
- slots required.
- Each entry gives three conditions, each involving attributes.
- The first must be true for an insn to occupy that delay slot
- location. The second is true for all insns that can be
- annulled if the branch is true and the third is true for all
- insns that can be annulled if the branch is false.
+/* Call a subroutine.
+ Operand 1 is the address to call.
+ Operand 2 is the number of arguments. */
- Multiple DEFINE_DELAYs may be present. They indicate differing
- requirements for delay slots. */
-DEF_RTL_EXPR(DEFINE_DELAY, "define_delay", "eE", 'x')
-
-/* Define a set of insns that requires a function unit. This means that
- these insns produce their result after a delay and that there may be
- restrictions on the number of insns of this type that can be scheduled
- simultaneously.
-
- More than one DEFINE_FUNCTION_UNIT can be specified for a function unit.
- Each gives a set of operations and associated delays. The first three
- operands must be the same for each operation for the same function unit.
-
- All delays are specified in cycles.
-
- 1st operand: Name of function unit (mostly for documentation)
- 2nd operand: Number of identical function units in CPU
- 3rd operand: Total number of simultaneous insns that can execute on this
- function unit; 0 if unlimited.
- 4th operand: Condition involving insn attribute, that, if true, specifies
- those insns that this expression applies to.
- 5th operand: Constant delay after which insn result will be
- available.
- 6th operand: Delay until next insn can be scheduled on the function unit
- executing this operation. The meaning depends on whether or
- not the next operand is supplied.
- 7th operand: If this operand is not specified, the 6th operand gives the
- number of cycles after the instruction matching the 4th
- operand begins using the function unit until a subsequent
- insn can begin. A value of zero should be used for a
- unit with no issue constraints. If only one operation can
- be executed a time and the unit is busy for the entire time,
- the 3rd operand should be specified as 1, the 6th operand
- should be specified as 0, and the 7th operand should not
- be specified.
-
- If this operand is specified, it is a list of attribute
- expressions. If an insn for which any of these expressions
- is true is currently executing on the function unit, the
- issue delay will be given by the 6th operand. Otherwise,
- the insn can be immediately scheduled (subject to the limit
- on the number of simultaneous operations executing on the
- unit.) */
-DEF_RTL_EXPR(DEFINE_FUNCTION_UNIT, "define_function_unit", "siieiiV", 'x')
+DEF_RTL_EXPR(CALL, "call", "ee", RTX_EXTRA)
-/* Define attribute computation for `asm' instructions. */
-DEF_RTL_EXPR(DEFINE_ASM_ATTRIBUTES, "define_asm_attributes", "V", 'x' )
+/* Return from a subroutine. */
-/* Definition of a conditional execution meta operation. Automatically
- generates new instances of DEFINE_INSN, selected by having attribute
- "predicable" true. The new pattern will contain a COND_EXEC and the
- predicate at top-level.
+DEF_RTL_EXPR(RETURN, "return", "", RTX_EXTRA)
- Operand:
- 0: The predicate pattern. The top-level form should match a
- relational operator. Operands should have only one alternative.
- 1: A C expression giving an additional condition for recognizing
- the generated pattern.
- 2: A template or C code to produce assembler output. */
-DEF_RTL_EXPR(DEFINE_COND_EXEC, "define_cond_exec", "Ess", 'x')
+/* Special for EH return from subroutine. */
-/* SEQUENCE appears in the result of a `gen_...' function
- for a DEFINE_EXPAND that wants to make several insns.
- Its elements are the bodies of the insns that should be made.
- `emit_insn' takes the SEQUENCE apart and makes separate insns. */
-DEF_RTL_EXPR(SEQUENCE, "sequence", "E", 'x')
+DEF_RTL_EXPR(EH_RETURN, "eh_return", "", RTX_EXTRA)
-/* Refers to the address of its argument. This is only used in alias.c. */
-DEF_RTL_EXPR(ADDRESS, "address", "e", 'm')
+/* Conditional trap.
+ Operand 1 is the condition.
+ Operand 2 is the trap code.
+ For an unconditional trap, make the condition (const_int 1). */
+DEF_RTL_EXPR(TRAP_IF, "trap_if", "ee", RTX_EXTRA)
/* ----------------------------------------------------------------------
- Constructions for CPU pipeline description described by NDFAs.
- These do not appear in actual rtl code in the compiler.
+ Primitive values for use in expressions.
---------------------------------------------------------------------- */
-/* (define_cpu_unit string [string]) describes cpu functional
- units (separated by comma).
-
- 1st operand: Names of cpu functional units.
- 2nd operand: Name of automaton (see comments for DEFINE_AUTOMATON).
+/* numeric integer constant */
+DEF_RTL_EXPR(CONST_INT, "const_int", "w", RTX_CONST_OBJ)
- All define_reservations, define_cpu_units, and
- define_query_cpu_units should have unique names which may not be
- "nothing". */
-DEF_RTL_EXPR(DEFINE_CPU_UNIT, "define_cpu_unit", "sS", 'x')
+/* fixed-point constant */
+DEF_RTL_EXPR(CONST_FIXED, "const_fixed", "www", RTX_CONST_OBJ)
-/* (define_query_cpu_unit string [string]) describes cpu functional
- units analogously to define_cpu_unit. The reservation of such
- units can be queried for automaton state. */
-DEF_RTL_EXPR(DEFINE_QUERY_CPU_UNIT, "define_query_cpu_unit", "sS", 'x')
+/* numeric floating point constant.
+ Operands hold the value. They are all 'w' and there may be from 2 to 6;
+ see real.h. */
+DEF_RTL_EXPR(CONST_DOUBLE, "const_double", CONST_DOUBLE_FORMAT, RTX_CONST_OBJ)
-/* (exclusion_set string string) means that each CPU functional unit
- in the first string can not be reserved simultaneously with any
- unit whose name is in the second string and vise versa. CPU units
- in the string are separated by commas. For example, it is useful
- for description CPU with fully pipelined floating point functional
- unit which can execute simultaneously only single floating point
- insns or only double floating point insns. All CPU functional
- units in a set should belong to the same automaton. */
-DEF_RTL_EXPR(EXCLUSION_SET, "exclusion_set", "ss", 'x')
+/* Describes a vector constant. */
+DEF_RTL_EXPR(CONST_VECTOR, "const_vector", "E", RTX_CONST_OBJ)
-/* (presence_set string string) means that each CPU functional unit in
- the first string can not be reserved unless at least one of pattern
- of units whose names are in the second string is reserved. This is
- an asymmetric relation. CPU units or unit patterns in the strings
- are separated by commas. Pattern is one unit name or unit names
- separated by white-spaces.
-
- For example, it is useful for description that slot1 is reserved
- after slot0 reservation for a VLIW processor. We could describe it
- by the following construction
+/* String constant. Used for attributes in machine descriptions and
+ for special cases in DWARF2 debug output. NOT used for source-
+ language string constants. */
+DEF_RTL_EXPR(CONST_STRING, "const_string", "s", RTX_OBJ)
- (presence_set "slot1" "slot0")
+/* This is used to encapsulate an expression whose value is constant
+ (such as the sum of a SYMBOL_REF and a CONST_INT) so that it will be
+ recognized as a constant operand rather than by arithmetic instructions. */
- Or slot1 is reserved only after slot0 and unit b0 reservation. In
- this case we could write
+DEF_RTL_EXPR(CONST, "const", "e", RTX_CONST_OBJ)
- (presence_set "slot1" "slot0 b0")
+/* program counter. Ordinary jumps are represented
+ by a SET whose first operand is (PC). */
+DEF_RTL_EXPR(PC, "pc", "", RTX_OBJ)
- All CPU functional units in a set should belong to the same
- automaton. */
-DEF_RTL_EXPR(PRESENCE_SET, "presence_set", "ss", 'x')
+/* A register. The "operand" is the register number, accessed with
+ the REGNO macro. If this number is less than FIRST_PSEUDO_REGISTER
+ than a hardware register is being referred to. The second operand
+ holds the original register number - this will be different for a
+ pseudo register that got turned into a hard register. The third
+ operand points to a reg_attrs structure.
+ This rtx needs to have as many (or more) fields as a MEM, since we
+ can change REG rtx's into MEMs during reload. */
+DEF_RTL_EXPR(REG, "reg", "i00", RTX_OBJ)
-/* (final_presence_set string string) is analogous to `presence_set'.
- The difference between them is when checking is done. When an
- instruction is issued in given automaton state reflecting all
- current and planned unit reservations, the automaton state is
- changed. The first state is a source state, the second one is a
- result state. Checking for `presence_set' is done on the source
- state reservation, checking for `final_presence_set' is done on the
- result reservation. This construction is useful to describe a
- reservation which is actually two subsequent reservations. For
- example, if we use
+/* A scratch register. This represents a register used only within a
+ single insn. It will be turned into a REG during register allocation
+ or reload unless the constraint indicates that the register won't be
+ needed, in which case it can remain a SCRATCH. This code is
+ marked as having one operand so it can be turned into a REG. */
+DEF_RTL_EXPR(SCRATCH, "scratch", "0", RTX_OBJ)
- (presence_set "slot1" "slot0")
+/* A reference to a part of another value. The first operand is the
+ complete value and the second is the byte offset of the selected part. */
+DEF_RTL_EXPR(SUBREG, "subreg", "ei", RTX_EXTRA)
- the following insn will be never issued (because slot1 requires
- slot0 which is absent in the source state).
+/* This one-argument rtx is used for move instructions
+ that are guaranteed to alter only the low part of a destination.
+ Thus, (SET (SUBREG:HI (REG...)) (MEM:HI ...))
+ has an unspecified effect on the high part of REG,
+ but (SET (STRICT_LOW_PART (SUBREG:HI (REG...))) (MEM:HI ...))
+ is guaranteed to alter only the bits of REG that are in HImode.
- (define_reservation "insn_and_nop" "slot0 + slot1")
+ The actual instruction used is probably the same in both cases,
+ but the register constraints may be tighter when STRICT_LOW_PART
+ is in use. */
- but it can be issued if we use analogous `final_presence_set'. */
-DEF_RTL_EXPR(FINAL_PRESENCE_SET, "final_presence_set", "ss", 'x')
+DEF_RTL_EXPR(STRICT_LOW_PART, "strict_low_part", "e", RTX_EXTRA)
-/* (absence_set string string) means that each CPU functional unit in
- the first string can be reserved only if each pattern of units
- whose names are in the second string is not reserved. This is an
- asymmetric relation (actually exclusion set is analogous to this
- one but it is symmetric). CPU units or unit patterns in the string
- are separated by commas. Pattern is one unit name or unit names
- separated by white-spaces.
+/* (CONCAT a b) represents the virtual concatenation of a and b
+ to make a value that has as many bits as a and b put together.
+ This is used for complex values. Normally it appears only
+ in DECL_RTLs and during RTL generation, but not in the insn chain. */
+DEF_RTL_EXPR(CONCAT, "concat", "ee", RTX_OBJ)
- For example, it is useful for description that slot0 can not be
- reserved after slot1 or slot2 reservation for a VLIW processor. We
- could describe it by the following construction
+/* (CONCATN [a1 a2 ... an]) represents the virtual concatenation of
+ all An to make a value. This is an extension of CONCAT to larger
+ number of components. Like CONCAT, it should not appear in the
+ insn chain. Every element of the CONCATN is the same size. */
+DEF_RTL_EXPR(CONCATN, "concatn", "E", RTX_OBJ)
- (absence_set "slot2" "slot0, slot1")
+/* A memory location; operand is the address. The second operand is the
+ alias set to which this MEM belongs. We use `0' instead of `w' for this
+ field so that the field need not be specified in machine descriptions. */
+DEF_RTL_EXPR(MEM, "mem", "e0", RTX_OBJ)
- Or slot2 can not be reserved if slot0 and unit b0 are reserved or
- slot1 and unit b1 are reserved . In this case we could write
+/* Reference to an assembler label in the code for this function.
+ The operand is a CODE_LABEL found in the insn chain. */
+DEF_RTL_EXPR(LABEL_REF, "label_ref", "u", RTX_CONST_OBJ)
- (absence_set "slot2" "slot0 b0, slot1 b1")
+/* Reference to a named label:
+ Operand 0: label name
+ Operand 1: flags (see SYMBOL_FLAG_* in rtl.h)
+ Operand 2: tree from which this symbol is derived, or null.
+ This is either a DECL node, or some kind of constant. */
+DEF_RTL_EXPR(SYMBOL_REF, "symbol_ref", "s00", RTX_CONST_OBJ)
- All CPU functional units in a set should to belong the same
- automaton. */
-DEF_RTL_EXPR(ABSENCE_SET, "absence_set", "ss", 'x')
+/* The condition code register is represented, in our imagination,
+ as a register holding a value that can be compared to zero.
+ In fact, the machine has already compared them and recorded the
+ results; but instructions that look at the condition code
+ pretend to be looking at the entire value and comparing it. */
+DEF_RTL_EXPR(CC0, "cc0", "", RTX_OBJ)
-/* (final_absence_set string string) is analogous to `absence_set' but
- checking is done on the result (state) reservation. See comments
- for `final_presence_set'. */
-DEF_RTL_EXPR(FINAL_ABSENCE_SET, "final_absence_set", "ss", 'x')
+/* ----------------------------------------------------------------------
+ Expressions for operators in an rtl pattern
+ ---------------------------------------------------------------------- */
-/* (define_bypass number out_insn_names in_insn_names) names bypass
- with given latency (the first number) from insns given by the first
- string (see define_insn_reservation) into insns given by the second
- string. Insn names in the strings are separated by commas. The
- third operand is optional name of function which is additional
- guard for the bypass. The function will get the two insns as
- parameters. If the function returns zero the bypass will be
- ignored for this case. Additional guard is necessary to recognize
- complicated bypasses, e.g. when consumer is load address. */
-DEF_RTL_EXPR(DEFINE_BYPASS, "define_bypass", "issS", 'x')
+/* if_then_else. This is used in representing ordinary
+ conditional jump instructions.
+ Operand:
+ 0: condition
+ 1: then expr
+ 2: else expr */
+DEF_RTL_EXPR(IF_THEN_ELSE, "if_then_else", "eee", RTX_TERNARY)
-/* (define_automaton string) describes names of automata generated and
- used for pipeline hazards recognition. The names are separated by
- comma. Actually it is possibly to generate the single automaton
- but unfortunately it can be very large. If we use more one
- automata, the summary size of the automata usually is less than the
- single one. The automaton name is used in define_cpu_unit and
- define_query_cpu_unit. All automata should have unique names. */
-DEF_RTL_EXPR(DEFINE_AUTOMATON, "define_automaton", "s", 'x')
+/* Comparison, produces a condition code result. */
+DEF_RTL_EXPR(COMPARE, "compare", "ee", RTX_BIN_ARITH)
-/* (automata_option string) describes option for generation of
- automata. Currently there are the following options:
+/* plus */
+DEF_RTL_EXPR(PLUS, "plus", "ee", RTX_COMM_ARITH)
- o "no-minimization" which makes no minimization of automata. This
- is only worth to do when we are debugging the description and
- need to look more accurately at reservations of states.
+/* Operand 0 minus operand 1. */
+DEF_RTL_EXPR(MINUS, "minus", "ee", RTX_BIN_ARITH)
- o "time" which means printing additional time statistics about
- generation of automata.
-
- o "v" which means generation of file describing the result
- automata. The file has suffix `.dfa' and can be used for the
- description verification and debugging.
+/* Minus operand 0. */
+DEF_RTL_EXPR(NEG, "neg", "e", RTX_UNARY)
- o "w" which means generation of warning instead of error for
- non-critical errors.
+DEF_RTL_EXPR(MULT, "mult", "ee", RTX_COMM_ARITH)
- o "ndfa" which makes nondeterministic finite state automata. */
-DEF_RTL_EXPR(AUTOMATA_OPTION, "automata_option", "s", 'x')
+/* Multiplication with signed saturation */
+DEF_RTL_EXPR(SS_MULT, "ss_mult", "ee", RTX_COMM_ARITH)
+/* Multiplication with unsigned saturation */
+DEF_RTL_EXPR(US_MULT, "us_mult", "ee", RTX_COMM_ARITH)
-/* (define_reservation string string) names reservation (the first
- string) of cpu functional units (the 2nd string). Sometimes unit
- reservations for different insns contain common parts. In such
- case, you can describe common part and use its name (the 1st
- parameter) in regular expression in define_insn_reservation. All
- define_reservations, define_cpu_units, and define_query_cpu_units
- should have unique names which may not be "nothing". */
-DEF_RTL_EXPR(DEFINE_RESERVATION, "define_reservation", "ss", 'x')
+/* Operand 0 divided by operand 1. */
+DEF_RTL_EXPR(DIV, "div", "ee", RTX_BIN_ARITH)
+/* Division with signed saturation */
+DEF_RTL_EXPR(SS_DIV, "ss_div", "ee", RTX_BIN_ARITH)
+/* Division with unsigned saturation */
+DEF_RTL_EXPR(US_DIV, "us_div", "ee", RTX_BIN_ARITH)
-/* (define_insn_reservation name default_latency condition regexpr)
- describes reservation of cpu functional units (the 3nd operand) for
- instruction which is selected by the condition (the 2nd parameter).
- The first parameter is used for output of debugging information.
- The reservations are described by a regular expression according
- the following syntax:
+/* Remainder of operand 0 divided by operand 1. */
+DEF_RTL_EXPR(MOD, "mod", "ee", RTX_BIN_ARITH)
- regexp = regexp "," oneof
- | oneof
+/* Unsigned divide and remainder. */
+DEF_RTL_EXPR(UDIV, "udiv", "ee", RTX_BIN_ARITH)
+DEF_RTL_EXPR(UMOD, "umod", "ee", RTX_BIN_ARITH)
- oneof = oneof "|" allof
- | allof
+/* Bitwise operations. */
+DEF_RTL_EXPR(AND, "and", "ee", RTX_COMM_ARITH)
+DEF_RTL_EXPR(IOR, "ior", "ee", RTX_COMM_ARITH)
+DEF_RTL_EXPR(XOR, "xor", "ee", RTX_COMM_ARITH)
+DEF_RTL_EXPR(NOT, "not", "e", RTX_UNARY)
- allof = allof "+" repeat
- | repeat
-
- repeat = element "*" number
- | element
+/* Operand:
+ 0: value to be shifted.
+ 1: number of bits. */
+DEF_RTL_EXPR(ASHIFT, "ashift", "ee", RTX_BIN_ARITH) /* shift left */
+DEF_RTL_EXPR(ROTATE, "rotate", "ee", RTX_BIN_ARITH) /* rotate left */
+DEF_RTL_EXPR(ASHIFTRT, "ashiftrt", "ee", RTX_BIN_ARITH) /* arithmetic shift right */
+DEF_RTL_EXPR(LSHIFTRT, "lshiftrt", "ee", RTX_BIN_ARITH) /* logical shift right */
+DEF_RTL_EXPR(ROTATERT, "rotatert", "ee", RTX_BIN_ARITH) /* rotate right */
- element = cpu_function_unit_name
- | reservation_name
- | result_name
- | "nothing"
- | "(" regexp ")"
+/* Minimum and maximum values of two operands. We need both signed and
+ unsigned forms. (We cannot use MIN for SMIN because it conflicts
+ with a macro of the same name.) The signed variants should be used
+ with floating point. Further, if both operands are zeros, or if either
+ operand is NaN, then it is unspecified which of the two operands is
+ returned as the result. */
- 1. "," is used for describing start of the next cycle in
- reservation.
+DEF_RTL_EXPR(SMIN, "smin", "ee", RTX_COMM_ARITH)
+DEF_RTL_EXPR(SMAX, "smax", "ee", RTX_COMM_ARITH)
+DEF_RTL_EXPR(UMIN, "umin", "ee", RTX_COMM_ARITH)
+DEF_RTL_EXPR(UMAX, "umax", "ee", RTX_COMM_ARITH)
- 2. "|" is used for describing the reservation described by the
- first regular expression *or* the reservation described by the
- second regular expression *or* etc.
+/* These unary operations are used to represent incrementation
+ and decrementation as they occur in memory addresses.
+ The amount of increment or decrement are not represented
+ because they can be understood from the machine-mode of the
+ containing MEM. These operations exist in only two cases:
+ 1. pushes onto the stack.
+ 2. created automatically by the auto-inc-dec pass. */
+DEF_RTL_EXPR(PRE_DEC, "pre_dec", "e", RTX_AUTOINC)
+DEF_RTL_EXPR(PRE_INC, "pre_inc", "e", RTX_AUTOINC)
+DEF_RTL_EXPR(POST_DEC, "post_dec", "e", RTX_AUTOINC)
+DEF_RTL_EXPR(POST_INC, "post_inc", "e", RTX_AUTOINC)
- 3. "+" is used for describing the reservation described by the
- first regular expression *and* the reservation described by the
- second regular expression *and* etc.
+/* These binary operations are used to represent generic address
+ side-effects in memory addresses, except for simple incrementation
+ or decrementation which use the above operations. They are
+ created automatically by the life_analysis pass in flow.c.
+ The first operand is a REG which is used as the address.
+ The second operand is an expression that is assigned to the
+ register, either before (PRE_MODIFY) or after (POST_MODIFY)
+ evaluating the address.
+ Currently, the compiler can only handle second operands of the
+ form (plus (reg) (reg)) and (plus (reg) (const_int)), where
+ the first operand of the PLUS has to be the same register as
+ the first operand of the *_MODIFY. */
+DEF_RTL_EXPR(PRE_MODIFY, "pre_modify", "ee", RTX_AUTOINC)
+DEF_RTL_EXPR(POST_MODIFY, "post_modify", "ee", RTX_AUTOINC)
- 4. "*" is used for convenience and simply means sequence in
- which the regular expression are repeated NUMBER times with
- cycle advancing (see ",").
+/* Comparison operations. The ordered comparisons exist in two
+ flavors, signed and unsigned. */
+DEF_RTL_EXPR(NE, "ne", "ee", RTX_COMM_COMPARE)
+DEF_RTL_EXPR(EQ, "eq", "ee", RTX_COMM_COMPARE)
+DEF_RTL_EXPR(GE, "ge", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(GT, "gt", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(LE, "le", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(LT, "lt", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(GEU, "geu", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(GTU, "gtu", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(LEU, "leu", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(LTU, "ltu", "ee", RTX_COMPARE)
- 5. cpu functional unit name which means its reservation.
+/* Additional floating point unordered comparison flavors. */
+DEF_RTL_EXPR(UNORDERED, "unordered", "ee", RTX_COMM_COMPARE)
+DEF_RTL_EXPR(ORDERED, "ordered", "ee", RTX_COMM_COMPARE)
- 6. reservation name -- see define_reservation.
+/* These are equivalent to unordered or ... */
+DEF_RTL_EXPR(UNEQ, "uneq", "ee", RTX_COMM_COMPARE)
+DEF_RTL_EXPR(UNGE, "unge", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(UNGT, "ungt", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(UNLE, "unle", "ee", RTX_COMPARE)
+DEF_RTL_EXPR(UNLT, "unlt", "ee", RTX_COMPARE)
- 7. string "nothing" means no units reservation. */
+/* This is an ordered NE, ie !UNEQ, ie false for NaN. */
+DEF_RTL_EXPR(LTGT, "ltgt", "ee", RTX_COMM_COMPARE)
-DEF_RTL_EXPR(DEFINE_INSN_RESERVATION, "define_insn_reservation", "sies", 'x')
+/* Represents the result of sign-extending the sole operand.
+ The machine modes of the operand and of the SIGN_EXTEND expression
+ determine how much sign-extension is going on. */
+DEF_RTL_EXPR(SIGN_EXTEND, "sign_extend", "e", RTX_UNARY)
-/* ----------------------------------------------------------------------
- Expressions used for insn attributes. These also do not appear in
- actual rtl code in the compiler.
- ---------------------------------------------------------------------- */
+/* Similar for zero-extension (such as unsigned short to int). */
+DEF_RTL_EXPR(ZERO_EXTEND, "zero_extend", "e", RTX_UNARY)
-/* Definition of an insn attribute.
- 1st operand: name of the attribute
- 2nd operand: comma-separated list of possible attribute values
- 3rd operand: expression for the default value of the attribute. */
-DEF_RTL_EXPR(DEFINE_ATTR, "define_attr", "sse", 'x')
+/* Similar but here the operand has a wider mode. */
+DEF_RTL_EXPR(TRUNCATE, "truncate", "e", RTX_UNARY)
-/* Marker for the name of an attribute. */
-DEF_RTL_EXPR(ATTR, "attr", "s", 'x')
+/* Similar for extending floating-point values (such as SFmode to DFmode). */
+DEF_RTL_EXPR(FLOAT_EXTEND, "float_extend", "e", RTX_UNARY)
+DEF_RTL_EXPR(FLOAT_TRUNCATE, "float_truncate", "e", RTX_UNARY)
-/* For use in the last (optional) operand of DEFINE_INSN or DEFINE_PEEPHOLE and
- in DEFINE_ASM_INSN to specify an attribute to assign to insns matching that
- pattern.
+/* Conversion of fixed point operand to floating point value. */
+DEF_RTL_EXPR(FLOAT, "float", "e", RTX_UNARY)
- (set_attr "name" "value") is equivalent to
- (set (attr "name") (const_string "value")) */
-DEF_RTL_EXPR(SET_ATTR, "set_attr", "ss", 'x')
+/* With fixed-point machine mode:
+ Conversion of floating point operand to fixed point value.
+ Value is defined only when the operand's value is an integer.
+ With floating-point machine mode (and operand with same mode):
+ Operand is rounded toward zero to produce an integer value
+ represented in floating point. */
+DEF_RTL_EXPR(FIX, "fix", "e", RTX_UNARY)
-/* In the last operand of DEFINE_INSN and DEFINE_PEEPHOLE, this can be used to
- specify that attribute values are to be assigned according to the
- alternative matched.
+/* Conversion of unsigned fixed point operand to floating point value. */
+DEF_RTL_EXPR(UNSIGNED_FLOAT, "unsigned_float", "e", RTX_UNARY)
- The following three expressions are equivalent:
+/* With fixed-point machine mode:
+ Conversion of floating point operand to *unsigned* fixed point value.
+ Value is defined only when the operand's value is an integer. */
+DEF_RTL_EXPR(UNSIGNED_FIX, "unsigned_fix", "e", RTX_UNARY)
+
+/* Conversions involving fractional fixed-point types without saturation,
+ including:
+ fractional to fractional (of different precision),
+ signed integer to fractional,
+ fractional to signed integer,
+ floating point to fractional,
+ fractional to floating point.
+ NOTE: fractional can be either signed or unsigned for conversions. */
+DEF_RTL_EXPR(FRACT_CONVERT, "fract_convert", "e", RTX_UNARY)
+
+/* Conversions involving fractional fixed-point types and unsigned integer
+ without saturation, including:
+ unsigned integer to fractional,
+ fractional to unsigned integer.
+ NOTE: fractional can be either signed or unsigned for conversions. */
+DEF_RTL_EXPR(UNSIGNED_FRACT_CONVERT, "unsigned_fract_convert", "e", RTX_UNARY)
+
+/* Conversions involving fractional fixed-point types with saturation,
+ including:
+ fractional to fractional (of different precision),
+ signed integer to fractional,
+ floating point to fractional.
+ NOTE: fractional can be either signed or unsigned for conversions. */
+DEF_RTL_EXPR(SAT_FRACT, "sat_fract", "e", RTX_UNARY)
+
+/* Conversions involving fractional fixed-point types and unsigned integer
+ with saturation, including:
+ unsigned integer to fractional.
+ NOTE: fractional can be either signed or unsigned for conversions. */
+DEF_RTL_EXPR(UNSIGNED_SAT_FRACT, "unsigned_sat_fract", "e", RTX_UNARY)
- (set (attr "att") (cond [(eq_attrq "alternative" "1") (const_string "a1")
- (eq_attrq "alternative" "2") (const_string "a2")]
- (const_string "a3")))
- (set_attr_alternative "att" [(const_string "a1") (const_string "a2")
- (const_string "a3")])
- (set_attr "att" "a1,a2,a3")
- */
-DEF_RTL_EXPR(SET_ATTR_ALTERNATIVE, "set_attr_alternative", "sE", 'x')
+/* Absolute value */
+DEF_RTL_EXPR(ABS, "abs", "e", RTX_UNARY)
-/* A conditional expression true if the value of the specified attribute of
- the current insn equals the specified value. The first operand is the
- attribute name and the second is the comparison value. */
-DEF_RTL_EXPR(EQ_ATTR, "eq_attr", "ss", 'x')
+/* Square root */
+DEF_RTL_EXPR(SQRT, "sqrt", "e", RTX_UNARY)
-/* A special case of the above representing a set of alternatives. The first
- operand is bitmap of the set, the second one is the default value. */
-DEF_RTL_EXPR(EQ_ATTR_ALT, "eq_attr_alt", "ii", 'x')
+/* Swap bytes. */
+DEF_RTL_EXPR(BSWAP, "bswap", "e", RTX_UNARY)
-/* A conditional expression which is true if the specified flag is
- true for the insn being scheduled in reorg.
+/* Find first bit that is set.
+ Value is 1 + number of trailing zeros in the arg.,
+ or 0 if arg is 0. */
+DEF_RTL_EXPR(FFS, "ffs", "e", RTX_UNARY)
- genattr.c defines the following flags which can be tested by
- (attr_flag "foo") expressions in eligible_for_delay.
+/* Count leading zeros. */
+DEF_RTL_EXPR(CLZ, "clz", "e", RTX_UNARY)
- forward, backward, very_likely, likely, very_unlikely, and unlikely. */
+/* Count trailing zeros. */
+DEF_RTL_EXPR(CTZ, "ctz", "e", RTX_UNARY)
-DEF_RTL_EXPR (ATTR_FLAG, "attr_flag", "s", 'x')
+/* Population count (number of 1 bits). */
+DEF_RTL_EXPR(POPCOUNT, "popcount", "e", RTX_UNARY)
-/* ----------------------------------------------------------------------
- Expression types used for things in the instruction chain.
+/* Population parity (number of 1 bits modulo 2). */
+DEF_RTL_EXPR(PARITY, "parity", "e", RTX_UNARY)
- All formats must start with "iuu" to handle the chain.
- Each insn expression holds an rtl instruction and its semantics
- during back-end processing.
- See macros's in "rtl.h" for the meaning of each rtx->u.fld[].
+/* Reference to a signed bit-field of specified size and position.
+ Operand 0 is the memory unit (usually SImode or QImode) which
+ contains the field's first bit. Operand 1 is the width, in bits.
+ Operand 2 is the number of bits in the memory unit before the
+ first bit of this field.
+ If BITS_BIG_ENDIAN is defined, the first bit is the msb and
+ operand 2 counts from the msb of the memory unit.
+ Otherwise, the first bit is the lsb and operand 2 counts from
+ the lsb of the memory unit.
+ This kind of expression can not appear as an lvalue in RTL. */
+DEF_RTL_EXPR(SIGN_EXTRACT, "sign_extract", "eee", RTX_BITFIELD_OPS)
- ---------------------------------------------------------------------- */
+/* Similar for unsigned bit-field.
+ But note! This kind of expression _can_ appear as an lvalue. */
+DEF_RTL_EXPR(ZERO_EXTRACT, "zero_extract", "eee", RTX_BITFIELD_OPS)
-/* An instruction that cannot jump. */
-DEF_RTL_EXPR(INSN, "insn", "iuuBieiee", 'i')
+/* For RISC machines. These save memory when splitting insns. */
-/* An instruction that can possibly jump.
- Fields ( rtx->u.fld[] ) have exact same meaning as INSN's. */
-DEF_RTL_EXPR(JUMP_INSN, "jump_insn", "iuuBieiee0", 'i')
+/* HIGH are the high-order bits of a constant expression. */
+DEF_RTL_EXPR(HIGH, "high", "e", RTX_CONST_OBJ)
-/* An instruction that can possibly call a subroutine
- but which will not change which instruction comes next
- in the current function.
- Field ( rtx->u.fld[9] ) is CALL_INSN_FUNCTION_USAGE.
- All other fields ( rtx->u.fld[] ) have exact same meaning as INSN's. */
-DEF_RTL_EXPR(CALL_INSN, "call_insn", "iuuBieieee", 'i')
+/* LO_SUM is the sum of a register and the low-order bits
+ of a constant expression. */
+DEF_RTL_EXPR(LO_SUM, "lo_sum", "ee", RTX_OBJ)
-/* A marker that indicates that control will not flow through. */
-DEF_RTL_EXPR(BARRIER, "barrier", "iuu000000", 'x')
+/* Describes a merge operation between two vector values.
+ Operands 0 and 1 are the vectors to be merged, operand 2 is a bitmask
+ that specifies where the parts of the result are taken from. Set bits
+ indicate operand 0, clear bits indicate operand 1. The parts are defined
+ by the mode of the vectors. */
+DEF_RTL_EXPR(VEC_MERGE, "vec_merge", "eee", RTX_TERNARY)
-/* Holds a label that is followed by instructions.
- Operand:
- 5: is used in jump.c for the use-count of the label.
- 6: is used in flow.c to point to the chain of label_ref's to this label.
- 7: is a number that is unique in the entire compilation.
- 8: is the user-given name of the label, if any. */
-DEF_RTL_EXPR(CODE_LABEL, "code_label", "iuuB00is", 'x')
+/* Describes an operation that selects parts of a vector.
+ Operands 0 is the source vector, operand 1 is a PARALLEL that contains
+ a CONST_INT for each of the subparts of the result vector, giving the
+ number of the source subpart that should be stored into it. */
+DEF_RTL_EXPR(VEC_SELECT, "vec_select", "ee", RTX_BIN_ARITH)
-/* Say where in the code a source line starts, for symbol table's sake.
- Operand:
- 5: filename, if line number > 0, note-specific data otherwise.
- 6: line number if > 0, enum note_insn otherwise.
- 7: unique number if line number == note_insn_deleted_label. */
-DEF_RTL_EXPR(NOTE, "note", "iuuB0ni", 'x')
+/* Describes a vector concat operation. Operands 0 and 1 are the source
+ vectors, the result is a vector that is as long as operands 0 and 1
+ combined and is the concatenation of the two source vectors. */
+DEF_RTL_EXPR(VEC_CONCAT, "vec_concat", "ee", RTX_BIN_ARITH)
-/* ----------------------------------------------------------------------
- Top level constituents of INSN, JUMP_INSN and CALL_INSN.
- ---------------------------------------------------------------------- */
-
-/* Conditionally execute code.
- Operand 0 is the condition that if true, the code is executed.
- Operand 1 is the code to be executed (typically a SET).
+/* Describes an operation that converts a small vector into a larger one by
+ duplicating the input values. The output vector mode must have the same
+ submodes as the input vector mode, and the number of output parts must be
+ an integer multiple of the number of input parts. */
+DEF_RTL_EXPR(VEC_DUPLICATE, "vec_duplicate", "e", RTX_UNARY)
- Semantics are that there are no side effects if the condition
- is false. This pattern is created automatically by the if_convert
- pass run after reload or by target-specific splitters. */
-DEF_RTL_EXPR(COND_EXEC, "cond_exec", "ee", 'x')
+/* Addition with signed saturation */
+DEF_RTL_EXPR(SS_PLUS, "ss_plus", "ee", RTX_COMM_ARITH)
-/* Several operations to be done in parallel (perhaps under COND_EXEC). */
-DEF_RTL_EXPR(PARALLEL, "parallel", "E", 'x')
+/* Addition with unsigned saturation */
+DEF_RTL_EXPR(US_PLUS, "us_plus", "ee", RTX_COMM_ARITH)
-/* A string that is passed through to the assembler as input.
- One can obviously pass comments through by using the
- assembler comment syntax.
- These occur in an insn all by themselves as the PATTERN.
- They also appear inside an ASM_OPERANDS
- as a convenient way to hold a string. */
-DEF_RTL_EXPR(ASM_INPUT, "asm_input", "s", 'x')
+/* Operand 0 minus operand 1, with signed saturation. */
+DEF_RTL_EXPR(SS_MINUS, "ss_minus", "ee", RTX_BIN_ARITH)
-/* An assembler instruction with operands.
- 1st operand is the instruction template.
- 2nd operand is the constraint for the output.
- 3rd operand is the number of the output this expression refers to.
- When an insn stores more than one value, a separate ASM_OPERANDS
- is made for each output; this integer distinguishes them.
- 4th is a vector of values of input operands.
- 5th is a vector of modes and constraints for the input operands.
- Each element is an ASM_INPUT containing a constraint string
- and whose mode indicates the mode of the input operand.
- 6th is the name of the containing source file.
- 7th is the source line number. */
-DEF_RTL_EXPR(ASM_OPERANDS, "asm_operands", "ssiEEsi", 'x')
+/* Negation with signed saturation. */
+DEF_RTL_EXPR(SS_NEG, "ss_neg", "e", RTX_UNARY)
+/* Negation with unsigned saturation. */
+DEF_RTL_EXPR(US_NEG, "us_neg", "e", RTX_UNARY)
-/* A machine-specific operation.
- 1st operand is a vector of operands being used by the operation so that
- any needed reloads can be done.
- 2nd operand is a unique value saying which of a number of machine-specific
- operations is to be performed.
- (Note that the vector must be the first operand because of the way that
- genrecog.c record positions within an insn.)
- This can occur all by itself in a PATTERN, as a component of a PARALLEL,
- or inside an expression. */
-DEF_RTL_EXPR(UNSPEC, "unspec", "Ei", 'x')
+/* Absolute value with signed saturation. */
+DEF_RTL_EXPR(SS_ABS, "ss_abs", "e", RTX_UNARY)
-/* Similar, but a volatile operation and one which may trap. */
-DEF_RTL_EXPR(UNSPEC_VOLATILE, "unspec_volatile", "Ei", 'x')
+/* Shift left with signed saturation. */
+DEF_RTL_EXPR(SS_ASHIFT, "ss_ashift", "ee", RTX_BIN_ARITH)
-/* Vector of addresses, stored as full words. */
-/* Each element is a LABEL_REF to a CODE_LABEL whose address we want. */
-DEF_RTL_EXPR(ADDR_VEC, "addr_vec", "E", 'x')
+/* Shift left with unsigned saturation. */
+DEF_RTL_EXPR(US_ASHIFT, "us_ashift", "ee", RTX_BIN_ARITH)
-/* Vector of address differences X0 - BASE, X1 - BASE, ...
- First operand is BASE; the vector contains the X's.
- The machine mode of this rtx says how much space to leave
- for each difference and is adjusted by branch shortening if
- CASE_VECTOR_SHORTEN_MODE is defined.
- The third and fourth operands store the target labels with the
- minimum and maximum addresses respectively.
- The fifth operand stores flags for use by branch shortening.
- Set at the start of shorten_branches:
- min_align: the minimum alignment for any of the target labels.
- base_after_vec: true iff BASE is after the ADDR_DIFF_VEC.
- min_after_vec: true iff minimum addr target label is after the ADDR_DIFF_VEC.
- max_after_vec: true iff maximum addr target label is after the ADDR_DIFF_VEC.
- min_after_base: true iff minimum address target label is after BASE.
- max_after_base: true iff maximum address target label is after BASE.
- Set by the actual branch shortening process:
- offset_unsigned: true iff offsets have to be treated as unsigned.
- scale: scaling that is necessary to make offsets fit into the mode.
+/* Operand 0 minus operand 1, with unsigned saturation. */
+DEF_RTL_EXPR(US_MINUS, "us_minus", "ee", RTX_BIN_ARITH)
- The third, fourth and fifth operands are only valid when
- CASE_VECTOR_SHORTEN_MODE is defined, and only in an optimizing
- compilations. */
-
-DEF_RTL_EXPR(ADDR_DIFF_VEC, "addr_diff_vec", "eEee0", 'x')
+/* Signed saturating truncate. */
+DEF_RTL_EXPR(SS_TRUNCATE, "ss_truncate", "e", RTX_UNARY)
-/* Memory prefetch, with attributes supported on some targets.
- Operand 1 is the address of the memory to fetch.
- Operand 2 is 1 for a write access, 0 otherwise.
- Operand 3 is the level of temporal locality; 0 means there is no
- temporal locality and 1, 2, and 3 are for increasing levels of temporal
- locality.
+/* Unsigned saturating truncate. */
+DEF_RTL_EXPR(US_TRUNCATE, "us_truncate", "e", RTX_UNARY)
- The attributes specified by operands 2 and 3 are ignored for targets
- whose prefetch instructions do not support them. */
-DEF_RTL_EXPR(PREFETCH, "prefetch", "eee", 'x')
+/* Information about the variable and its location. */
+/* Changed 'te' to 'tei'; the 'i' field is for recording
+ initialization status of variables. */
+DEF_RTL_EXPR(VAR_LOCATION, "var_location", "tei", RTX_EXTRA)
-/* ----------------------------------------------------------------------
- At the top level of an instruction (perhaps under PARALLEL).
- ---------------------------------------------------------------------- */
+/* All expressions from this point forward appear only in machine
+ descriptions. */
+#ifdef GENERATOR_FILE
-/* Assignment.
- Operand 1 is the location (REG, MEM, PC, CC0 or whatever) assigned to.
- Operand 2 is the value stored there.
- ALL assignment must use SET.
- Instructions that do multiple assignments must use multiple SET,
- under PARALLEL. */
-DEF_RTL_EXPR(SET, "set", "ee", 'x')
+/* Include a secondary machine-description file at this point. */
+DEF_RTL_EXPR(INCLUDE, "include", "s", RTX_EXTRA)
-/* Indicate something is used in a way that we don't want to explain.
- For example, subroutine calls will use the register
- in which the static chain is passed. */
-DEF_RTL_EXPR(USE, "use", "e", 'x')
+/* Pattern-matching operators: */
-/* Indicate something is clobbered in a way that we don't want to explain.
- For example, subroutine calls will clobber some physical registers
- (the ones that are by convention not saved). */
-DEF_RTL_EXPR(CLOBBER, "clobber", "e", 'x')
+/* Use the function named by the second arg (the string)
+ as a predicate; if matched, store the structure that was matched
+ in the operand table at index specified by the first arg (the integer).
+ If the second arg is the null string, the structure is just stored.
-/* Call a subroutine.
- Operand 1 is the address to call.
- Operand 2 is the number of arguments. */
+ A third string argument indicates to the register allocator restrictions
+ on where the operand can be allocated.
-DEF_RTL_EXPR(CALL, "call", "ee", 'x')
+ If the target needs no restriction on any instruction this field should
+ be the null string.
-/* Return from a subroutine. */
+ The string is prepended by:
+ '=' to indicate the operand is only written to.
+ '+' to indicate the operand is both read and written to.
-DEF_RTL_EXPR(RETURN, "return", "", 'x')
+ Each character in the string represents an allocable class for an operand.
+ 'g' indicates the operand can be any valid class.
+ 'i' indicates the operand can be immediate (in the instruction) data.
+ 'r' indicates the operand can be in a register.
+ 'm' indicates the operand can be in memory.
+ 'o' a subset of the 'm' class. Those memory addressing modes that
+ can be offset at compile time (have a constant added to them).
-/* Conditional trap.
- Operand 1 is the condition.
- Operand 2 is the trap code.
- For an unconditional trap, make the condition (const_int 1). */
-DEF_RTL_EXPR(TRAP_IF, "trap_if", "ee", 'x')
+ Other characters indicate target dependent operand classes and
+ are described in each target's machine description.
-/* Placeholder for _Unwind_Resume before we know if a function call
- or a branch is needed. Operand 1 is the exception region from
- which control is flowing. */
-DEF_RTL_EXPR(RESX, "resx", "i", 'x')
+ For instructions with more than one operand, sets of classes can be
+ separated by a comma to indicate the appropriate multi-operand constraints.
+ There must be a 1 to 1 correspondence between these sets of classes in
+ all operands for an instruction.
+ */
+DEF_RTL_EXPR(MATCH_OPERAND, "match_operand", "iss", RTX_MATCH)
-/* ----------------------------------------------------------------------
- Primitive values for use in expressions.
- ---------------------------------------------------------------------- */
+/* Match a SCRATCH or a register. When used to generate rtl, a
+ SCRATCH is generated. As for MATCH_OPERAND, the mode specifies
+ the desired mode and the first argument is the operand number.
+ The second argument is the constraint. */
+DEF_RTL_EXPR(MATCH_SCRATCH, "match_scratch", "is", RTX_MATCH)
-/* numeric integer constant */
-DEF_RTL_EXPR(CONST_INT, "const_int", "w", 'o')
+/* Apply a predicate, AND match recursively the operands of the rtx.
+ Operand 0 is the operand-number, as in match_operand.
+ Operand 1 is a predicate to apply (as a string, a function name).
+ Operand 2 is a vector of expressions, each of which must match
+ one subexpression of the rtx this construct is matching. */
+DEF_RTL_EXPR(MATCH_OPERATOR, "match_operator", "isE", RTX_MATCH)
-/* numeric floating point constant.
- Operands hold the value. They are all 'w' and there may be from 2 to 6;
- see real.h. */
-DEF_RTL_EXPR(CONST_DOUBLE, "const_double", CONST_DOUBLE_FORMAT, 'o')
+/* Match a PARALLEL of arbitrary length. The predicate is applied
+ to the PARALLEL and the initial expressions in the PARALLEL are matched.
+ Operand 0 is the operand-number, as in match_operand.
+ Operand 1 is a predicate to apply to the PARALLEL.
+ Operand 2 is a vector of expressions, each of which must match the
+ corresponding element in the PARALLEL. */
+DEF_RTL_EXPR(MATCH_PARALLEL, "match_parallel", "isE", RTX_MATCH)
+
+/* Match only something equal to what is stored in the operand table
+ at the index specified by the argument. Use with MATCH_OPERAND. */
+DEF_RTL_EXPR(MATCH_DUP, "match_dup", "i", RTX_MATCH)
+
+/* Match only something equal to what is stored in the operand table
+ at the index specified by the argument. Use with MATCH_OPERATOR. */
+DEF_RTL_EXPR(MATCH_OP_DUP, "match_op_dup", "iE", RTX_MATCH)
+
+/* Match only something equal to what is stored in the operand table
+ at the index specified by the argument. Use with MATCH_PARALLEL. */
+DEF_RTL_EXPR(MATCH_PAR_DUP, "match_par_dup", "iE", RTX_MATCH)
+
+/* Appears only in define_predicate/define_special_predicate
+ expressions. Evaluates true only if the operand has an RTX code
+ from the set given by the argument (a comma-separated list). If the
+ second argument is present and nonempty, it is a sequence of digits
+ and/or letters which indicates the subexpression to test, using the
+ same syntax as genextract/genrecog's location strings: 0-9 for
+ XEXP (op, n), a-z for XVECEXP (op, 0, n); each character applies to
+ the result of the one before it. */
+DEF_RTL_EXPR(MATCH_CODE, "match_code", "ss", RTX_MATCH)
+
+/* Appears only in define_predicate/define_special_predicate
+ expressions. The argument is a C expression to be injected at this
+ point in the predicate formula. */
+DEF_RTL_EXPR(MATCH_TEST, "match_test", "s", RTX_MATCH)
+
+/* Insn (and related) definitions. */
+
+/* Definition of the pattern for one kind of instruction.
+ Operand:
+ 0: names this instruction.
+ If the name is the null string, the instruction is in the
+ machine description just to be recognized, and will never be emitted by
+ the tree to rtl expander.
+ 1: is the pattern.
+ 2: is a string which is a C expression
+ giving an additional condition for recognizing this pattern.
+ A null string means no extra condition.
+ 3: is the action to execute if this pattern is matched.
+ If this assembler code template starts with a * then it is a fragment of
+ C code to run to decide on a template to use. Otherwise, it is the
+ template to use.
+ 4: optionally, a vector of attributes for this insn.
+ */
+DEF_RTL_EXPR(DEFINE_INSN, "define_insn", "sEsTV", RTX_EXTRA)
-/* Describes a vector constant. */
-DEF_RTL_EXPR(CONST_VECTOR, "const_vector", "E", 'x')
+/* Definition of a peephole optimization.
+ 1st operand: vector of insn patterns to match
+ 2nd operand: C expression that must be true
+ 3rd operand: template or C code to produce assembler output.
+ 4: optionally, a vector of attributes for this insn.
-/* String constant. Used only for attributes right now. */
-DEF_RTL_EXPR(CONST_STRING, "const_string", "s", 'o')
+ This form is deprecated; use define_peephole2 instead. */
+DEF_RTL_EXPR(DEFINE_PEEPHOLE, "define_peephole", "EsTV", RTX_EXTRA)
-/* This is used to encapsulate an expression whose value is constant
- (such as the sum of a SYMBOL_REF and a CONST_INT) so that it will be
- recognized as a constant operand rather than by arithmetic instructions. */
+/* Definition of a split operation.
+ 1st operand: insn pattern to match
+ 2nd operand: C expression that must be true
+ 3rd operand: vector of insn patterns to place into a SEQUENCE
+ 4th operand: optionally, some C code to execute before generating the
+ insns. This might, for example, create some RTX's and store them in
+ elements of `recog_data.operand' for use by the vector of
+ insn-patterns.
+ (`operands' is an alias here for `recog_data.operand'). */
+DEF_RTL_EXPR(DEFINE_SPLIT, "define_split", "EsES", RTX_EXTRA)
-DEF_RTL_EXPR(CONST, "const", "e", 'o')
+/* Definition of an insn and associated split.
+ This is the concatenation, with a few modifications, of a define_insn
+ and a define_split which share the same pattern.
+ Operand:
+ 0: names this instruction.
+ If the name is the null string, the instruction is in the
+ machine description just to be recognized, and will never be emitted by
+ the tree to rtl expander.
+ 1: is the pattern.
+ 2: is a string which is a C expression
+ giving an additional condition for recognizing this pattern.
+ A null string means no extra condition.
+ 3: is the action to execute if this pattern is matched.
+ If this assembler code template starts with a * then it is a fragment of
+ C code to run to decide on a template to use. Otherwise, it is the
+ template to use.
+ 4: C expression that must be true for split. This may start with "&&"
+ in which case the split condition is the logical and of the insn
+ condition and what follows the "&&" of this operand.
+ 5: vector of insn patterns to place into a SEQUENCE
+ 6: optionally, some C code to execute before generating the
+ insns. This might, for example, create some RTX's and store them in
+ elements of `recog_data.operand' for use by the vector of
+ insn-patterns.
+ (`operands' is an alias here for `recog_data.operand').
+ 7: optionally, a vector of attributes for this insn. */
+DEF_RTL_EXPR(DEFINE_INSN_AND_SPLIT, "define_insn_and_split", "sEsTsESV", RTX_EXTRA)
-/* program counter. Ordinary jumps are represented
- by a SET whose first operand is (PC). */
-DEF_RTL_EXPR(PC, "pc", "", 'o')
+/* Definition of an RTL peephole operation.
+ Follows the same arguments as define_split. */
+DEF_RTL_EXPR(DEFINE_PEEPHOLE2, "define_peephole2", "EsES", RTX_EXTRA)
-/* Used in the cselib routines to describe a value. */
-DEF_RTL_EXPR(VALUE, "value", "0", 'o')
+/* Define how to generate multiple insns for a standard insn name.
+ 1st operand: the insn name.
+ 2nd operand: vector of insn-patterns.
+ Use match_operand to substitute an element of `recog_data.operand'.
+ 3rd operand: C expression that must be true for this to be available.
+ This may not test any operands.
+ 4th operand: Extra C code to execute before generating the insns.
+ This might, for example, create some RTX's and store them in
+ elements of `recog_data.operand' for use by the vector of
+ insn-patterns.
+ (`operands' is an alias here for `recog_data.operand'). */
+DEF_RTL_EXPR(DEFINE_EXPAND, "define_expand", "sEss", RTX_EXTRA)
-/* A register. The "operand" is the register number, accessed with
- the REGNO macro. If this number is less than FIRST_PSEUDO_REGISTER
- than a hardware register is being referred to. The second operand
- holds the original register number - this will be different for a
- pseudo register that got turned into a hard register.
- This rtx needs to have as many (or more) fields as a MEM, since we
- can change REG rtx's into MEMs during reload. */
-DEF_RTL_EXPR(REG, "reg", "i00", 'o')
+/* Define a requirement for delay slots.
+ 1st operand: Condition involving insn attributes that, if true,
+ indicates that the insn requires the number of delay slots
+ shown.
+ 2nd operand: Vector whose length is the three times the number of delay
+ slots required.
+ Each entry gives three conditions, each involving attributes.
+ The first must be true for an insn to occupy that delay slot
+ location. The second is true for all insns that can be
+ annulled if the branch is true and the third is true for all
+ insns that can be annulled if the branch is false.
-/* A scratch register. This represents a register used only within a
- single insn. It will be turned into a REG during register allocation
- or reload unless the constraint indicates that the register won't be
- needed, in which case it can remain a SCRATCH. This code is
- marked as having one operand so it can be turned into a REG. */
-DEF_RTL_EXPR(SCRATCH, "scratch", "0", 'o')
+ Multiple DEFINE_DELAYs may be present. They indicate differing
+ requirements for delay slots. */
+DEF_RTL_EXPR(DEFINE_DELAY, "define_delay", "eE", RTX_EXTRA)
-/* One word of a multi-word value.
- The first operand is the complete value; the second says which word.
- The WORDS_BIG_ENDIAN flag controls whether word number 0
- (as numbered in a SUBREG) is the most or least significant word.
+/* Define attribute computation for `asm' instructions. */
+DEF_RTL_EXPR(DEFINE_ASM_ATTRIBUTES, "define_asm_attributes", "V", RTX_EXTRA)
- This is also used to refer to a value in a different machine mode.
- For example, it can be used to refer to a SImode value as if it were
- Qimode, or vice versa. Then the word number is always 0. */
-DEF_RTL_EXPR(SUBREG, "subreg", "ei", 'x')
+/* Definition of a conditional execution meta operation. Automatically
+ generates new instances of DEFINE_INSN, selected by having attribute
+ "predicable" true. The new pattern will contain a COND_EXEC and the
+ predicate at top-level.
-/* This one-argument rtx is used for move instructions
- that are guaranteed to alter only the low part of a destination.
- Thus, (SET (SUBREG:HI (REG...)) (MEM:HI ...))
- has an unspecified effect on the high part of REG,
- but (SET (STRICT_LOW_PART (SUBREG:HI (REG...))) (MEM:HI ...))
- is guaranteed to alter only the bits of REG that are in HImode.
+ Operand:
+ 0: The predicate pattern. The top-level form should match a
+ relational operator. Operands should have only one alternative.
+ 1: A C expression giving an additional condition for recognizing
+ the generated pattern.
+ 2: A template or C code to produce assembler output. */
+DEF_RTL_EXPR(DEFINE_COND_EXEC, "define_cond_exec", "Ess", RTX_EXTRA)
- The actual instruction used is probably the same in both cases,
- but the register constraints may be tighter when STRICT_LOW_PART
- is in use. */
+/* Definition of an operand predicate. The difference between
+ DEFINE_PREDICATE and DEFINE_SPECIAL_PREDICATE is that genrecog will
+ not warn about a match_operand with no mode if it has a predicate
+ defined with DEFINE_SPECIAL_PREDICATE.
-DEF_RTL_EXPR(STRICT_LOW_PART, "strict_low_part", "e", 'x')
+ Operand:
+ 0: The name of the predicate.
+ 1: A boolean expression which computes whether or not the predicate
+ matches. This expression can use IOR, AND, NOT, MATCH_OPERAND,
+ MATCH_CODE, and MATCH_TEST. It must be specific enough that genrecog
+ can calculate the set of RTX codes that can possibly match.
+ 2: A C function body which must return true for the predicate to match.
+ Optional. Use this when the test is too complicated to fit into a
+ match_test expression. */
+DEF_RTL_EXPR(DEFINE_PREDICATE, "define_predicate", "ses", RTX_EXTRA)
+DEF_RTL_EXPR(DEFINE_SPECIAL_PREDICATE, "define_special_predicate", "ses", RTX_EXTRA)
+
+/* Definition of a register operand constraint. This simply maps the
+ constraint string to a register class.
-/* (CONCAT a b) represents the virtual concatenation of a and b
- to make a value that has as many bits as a and b put together.
- This is used for complex values. Normally it appears only
- in DECL_RTLs and during RTL generation, but not in the insn chain. */
-DEF_RTL_EXPR(CONCAT, "concat", "ee", 'o')
+ Operand:
+ 0: The name of the constraint (often, but not always, a single letter).
+ 1: A C expression which evaluates to the appropriate register class for
+ this constraint. If this is not just a constant, it should look only
+ at -m switches and the like.
+ 2: A docstring for this constraint, in Texinfo syntax; not currently
+ used, in future will be incorporated into the manual's list of
+ machine-specific operand constraints. */
+DEF_RTL_EXPR(DEFINE_REGISTER_CONSTRAINT, "define_register_constraint", "sss", RTX_EXTRA)
-/* A memory location; operand is the address. The second operand is the
- alias set to which this MEM belongs. We use `0' instead of `w' for this
- field so that the field need not be specified in machine descriptions. */
-DEF_RTL_EXPR(MEM, "mem", "e0", 'o')
+/* Definition of a non-register operand constraint. These look at the
+ operand and decide whether it fits the constraint.
-/* Reference to an assembler label in the code for this function.
- The operand is a CODE_LABEL found in the insn chain.
- The unprinted fields 1 and 2 are used in flow.c for the
- LABEL_NEXTREF and CONTAINING_INSN. */
-DEF_RTL_EXPR(LABEL_REF, "label_ref", "u00", 'o')
+ DEFINE_CONSTRAINT gets no special treatment if it fails to match.
+ It is appropriate for constant-only constraints, and most others.
-/* Reference to a named label:
- Operand 0: label name
- Operand 1: flags (see SYMBOL_FLAG_* in rtl.h)
- Operand 2: tree from which this symbol is derived, or null.
- This is either a DECL node, or some kind of constant. */
-DEF_RTL_EXPR(SYMBOL_REF, "symbol_ref", "s00", 'o')
+ DEFINE_MEMORY_CONSTRAINT tells reload that this constraint can be made
+ to match, if it doesn't already, by converting the operand to the form
+ (mem (reg X)) where X is a base register. It is suitable for constraints
+ that describe a subset of all memory references.
+
+ DEFINE_ADDRESS_CONSTRAINT tells reload that this constraint can be made
+ to match, if it doesn't already, by converting the operand to the form
+ (reg X) where X is a base register. It is suitable for constraints that
+ describe a subset of all address references.
+
+ When in doubt, use plain DEFINE_CONSTRAINT.
+
+ Operand:
+ 0: The name of the constraint (often, but not always, a single letter).
+ 1: A docstring for this constraint, in Texinfo syntax; not currently
+ used, in future will be incorporated into the manual's list of
+ machine-specific operand constraints.
+ 2: A boolean expression which computes whether or not the constraint
+ matches. It should follow the same rules as a define_predicate
+ expression, including the bit about specifying the set of RTX codes
+ that could possibly match. MATCH_TEST subexpressions may make use of
+ these variables:
+ `op' - the RTL object defining the operand.
+ `mode' - the mode of `op'.
+ `ival' - INTVAL(op), if op is a CONST_INT.
+ `hval' - CONST_DOUBLE_HIGH(op), if op is an integer CONST_DOUBLE.
+ `lval' - CONST_DOUBLE_LOW(op), if op is an integer CONST_DOUBLE.
+ `rval' - CONST_DOUBLE_REAL_VALUE(op), if op is a floating-point
+ CONST_DOUBLE.
+ Do not use ival/hval/lval/rval if op is not the appropriate kind of
+ RTL object. */
+DEF_RTL_EXPR(DEFINE_CONSTRAINT, "define_constraint", "sse", RTX_EXTRA)
+DEF_RTL_EXPR(DEFINE_MEMORY_CONSTRAINT, "define_memory_constraint", "sse", RTX_EXTRA)
+DEF_RTL_EXPR(DEFINE_ADDRESS_CONSTRAINT, "define_address_constraint", "sse", RTX_EXTRA)
+
+
+/* Constructions for CPU pipeline description described by NDFAs. */
+
+/* (define_cpu_unit string [string]) describes cpu functional
+ units (separated by comma).
+
+ 1st operand: Names of cpu functional units.
+ 2nd operand: Name of automaton (see comments for DEFINE_AUTOMATON).
+
+ All define_reservations, define_cpu_units, and
+ define_query_cpu_units should have unique names which may not be
+ "nothing". */
+DEF_RTL_EXPR(DEFINE_CPU_UNIT, "define_cpu_unit", "sS", RTX_EXTRA)
+
+/* (define_query_cpu_unit string [string]) describes cpu functional
+ units analogously to define_cpu_unit. The reservation of such
+ units can be queried for automaton state. */
+DEF_RTL_EXPR(DEFINE_QUERY_CPU_UNIT, "define_query_cpu_unit", "sS", RTX_EXTRA)
+
+/* (exclusion_set string string) means that each CPU functional unit
+ in the first string can not be reserved simultaneously with any
+ unit whose name is in the second string and vise versa. CPU units
+ in the string are separated by commas. For example, it is useful
+ for description CPU with fully pipelined floating point functional
+ unit which can execute simultaneously only single floating point
+ insns or only double floating point insns. All CPU functional
+ units in a set should belong to the same automaton. */
+DEF_RTL_EXPR(EXCLUSION_SET, "exclusion_set", "ss", RTX_EXTRA)
+
+/* (presence_set string string) means that each CPU functional unit in
+ the first string can not be reserved unless at least one of pattern
+ of units whose names are in the second string is reserved. This is
+ an asymmetric relation. CPU units or unit patterns in the strings
+ are separated by commas. Pattern is one unit name or unit names
+ separated by white-spaces.
+
+ For example, it is useful for description that slot1 is reserved
+ after slot0 reservation for a VLIW processor. We could describe it
+ by the following construction
-/* The condition code register is represented, in our imagination,
- as a register holding a value that can be compared to zero.
- In fact, the machine has already compared them and recorded the
- results; but instructions that look at the condition code
- pretend to be looking at the entire value and comparing it. */
-DEF_RTL_EXPR(CC0, "cc0", "", 'o')
-
-/* Reference to the address of a register. Removed by purge_addressof after
- CSE has elided as many as possible.
- 1st operand: the register we may need the address of.
- 2nd operand: the original pseudo regno we were generated for.
- 3rd operand: the decl for the object in the register, for
- put_reg_in_stack. */
-
-DEF_RTL_EXPR(ADDRESSOF, "addressof", "eit", 'o')
-
-/* =====================================================================
- A QUEUED expression really points to a member of the queue of instructions
- to be output later for postincrement/postdecrement.
- QUEUED expressions never become part of instructions.
- When a QUEUED expression would be put into an instruction,
- instead either the incremented variable or a copy of its previous
- value is used.
-
- Operands are:
- 0. the variable to be incremented (a REG rtx).
- 1. the incrementing instruction, or 0 if it hasn't been output yet.
- 2. A REG rtx for a copy of the old value of the variable, or 0 if none yet.
- 3. the body to use for the incrementing instruction
- 4. the next QUEUED expression in the queue.
- ====================================================================== */
-
-DEF_RTL_EXPR(QUEUED, "queued", "eeeee", 'x')
+ (presence_set "slot1" "slot0")
-/* ----------------------------------------------------------------------
- Expressions for operators in an rtl pattern
- ---------------------------------------------------------------------- */
+ Or slot1 is reserved only after slot0 and unit b0 reservation. In
+ this case we could write
-/* if_then_else. This is used in representing ordinary
- conditional jump instructions.
- Operand:
- 0: condition
- 1: then expr
- 2: else expr */
-DEF_RTL_EXPR(IF_THEN_ELSE, "if_then_else", "eee", '3')
+ (presence_set "slot1" "slot0 b0")
-/* General conditional. The first operand is a vector composed of pairs of
- expressions. The first element of each pair is evaluated, in turn.
- The value of the conditional is the second expression of the first pair
- whose first expression evaluates nonzero. If none of the expressions is
- true, the second operand will be used as the value of the conditional.
+ All CPU functional units in a set should belong to the same
+ automaton. */
+DEF_RTL_EXPR(PRESENCE_SET, "presence_set", "ss", RTX_EXTRA)
- This should be replaced with use of IF_THEN_ELSE. */
-DEF_RTL_EXPR(COND, "cond", "Ee", 'x')
+/* (final_presence_set string string) is analogous to `presence_set'.
+ The difference between them is when checking is done. When an
+ instruction is issued in given automaton state reflecting all
+ current and planned unit reservations, the automaton state is
+ changed. The first state is a source state, the second one is a
+ result state. Checking for `presence_set' is done on the source
+ state reservation, checking for `final_presence_set' is done on the
+ result reservation. This construction is useful to describe a
+ reservation which is actually two subsequent reservations. For
+ example, if we use
-/* Comparison, produces a condition code result. */
-DEF_RTL_EXPR(COMPARE, "compare", "ee", '2')
+ (presence_set "slot1" "slot0")
-/* plus */
-DEF_RTL_EXPR(PLUS, "plus", "ee", 'c')
+ the following insn will be never issued (because slot1 requires
+ slot0 which is absent in the source state).
-/* Operand 0 minus operand 1. */
-DEF_RTL_EXPR(MINUS, "minus", "ee", '2')
+ (define_reservation "insn_and_nop" "slot0 + slot1")
-/* Minus operand 0. */
-DEF_RTL_EXPR(NEG, "neg", "e", '1')
+ but it can be issued if we use analogous `final_presence_set'. */
+DEF_RTL_EXPR(FINAL_PRESENCE_SET, "final_presence_set", "ss", RTX_EXTRA)
-DEF_RTL_EXPR(MULT, "mult", "ee", 'c')
+/* (absence_set string string) means that each CPU functional unit in
+ the first string can be reserved only if each pattern of units
+ whose names are in the second string is not reserved. This is an
+ asymmetric relation (actually exclusion set is analogous to this
+ one but it is symmetric). CPU units or unit patterns in the string
+ are separated by commas. Pattern is one unit name or unit names
+ separated by white-spaces.
-/* Operand 0 divided by operand 1. */
-DEF_RTL_EXPR(DIV, "div", "ee", '2')
-/* Remainder of operand 0 divided by operand 1. */
-DEF_RTL_EXPR(MOD, "mod", "ee", '2')
+ For example, it is useful for description that slot0 can not be
+ reserved after slot1 or slot2 reservation for a VLIW processor. We
+ could describe it by the following construction
-/* Unsigned divide and remainder. */
-DEF_RTL_EXPR(UDIV, "udiv", "ee", '2')
-DEF_RTL_EXPR(UMOD, "umod", "ee", '2')
+ (absence_set "slot2" "slot0, slot1")
-/* Bitwise operations. */
-DEF_RTL_EXPR(AND, "and", "ee", 'c')
+ Or slot2 can not be reserved if slot0 and unit b0 are reserved or
+ slot1 and unit b1 are reserved . In this case we could write
-DEF_RTL_EXPR(IOR, "ior", "ee", 'c')
+ (absence_set "slot2" "slot0 b0, slot1 b1")
-DEF_RTL_EXPR(XOR, "xor", "ee", 'c')
+ All CPU functional units in a set should to belong the same
+ automaton. */
+DEF_RTL_EXPR(ABSENCE_SET, "absence_set", "ss", RTX_EXTRA)
-DEF_RTL_EXPR(NOT, "not", "e", '1')
+/* (final_absence_set string string) is analogous to `absence_set' but
+ checking is done on the result (state) reservation. See comments
+ for `final_presence_set'. */
+DEF_RTL_EXPR(FINAL_ABSENCE_SET, "final_absence_set", "ss", RTX_EXTRA)
-/* Operand:
- 0: value to be shifted.
- 1: number of bits. */
-DEF_RTL_EXPR(ASHIFT, "ashift", "ee", '2') /* shift left */
-DEF_RTL_EXPR(ROTATE, "rotate", "ee", '2') /* rotate left */
-DEF_RTL_EXPR(ASHIFTRT, "ashiftrt", "ee", '2') /* arithmetic shift right */
-DEF_RTL_EXPR(LSHIFTRT, "lshiftrt", "ee", '2') /* logical shift right */
-DEF_RTL_EXPR(ROTATERT, "rotatert", "ee", '2') /* rotate right */
+/* (define_bypass number out_insn_names in_insn_names) names bypass
+ with given latency (the first number) from insns given by the first
+ string (see define_insn_reservation) into insns given by the second
+ string. Insn names in the strings are separated by commas. The
+ third operand is optional name of function which is additional
+ guard for the bypass. The function will get the two insns as
+ parameters. If the function returns zero the bypass will be
+ ignored for this case. Additional guard is necessary to recognize
+ complicated bypasses, e.g. when consumer is load address. If there
+ are more one bypass with the same output and input insns, the
+ chosen bypass is the first bypass with a guard in description whose
+ guard function returns nonzero. If there is no such bypass, then
+ bypass without the guard function is chosen. */
+DEF_RTL_EXPR(DEFINE_BYPASS, "define_bypass", "issS", RTX_EXTRA)
-/* Minimum and maximum values of two operands. We need both signed and
- unsigned forms. (We cannot use MIN for SMIN because it conflicts
- with a macro of the same name.) */
+/* (define_automaton string) describes names of automata generated and
+ used for pipeline hazards recognition. The names are separated by
+ comma. Actually it is possibly to generate the single automaton
+ but unfortunately it can be very large. If we use more one
+ automata, the summary size of the automata usually is less than the
+ single one. The automaton name is used in define_cpu_unit and
+ define_query_cpu_unit. All automata should have unique names. */
+DEF_RTL_EXPR(DEFINE_AUTOMATON, "define_automaton", "s", RTX_EXTRA)
-DEF_RTL_EXPR(SMIN, "smin", "ee", 'c')
-DEF_RTL_EXPR(SMAX, "smax", "ee", 'c')
-DEF_RTL_EXPR(UMIN, "umin", "ee", 'c')
-DEF_RTL_EXPR(UMAX, "umax", "ee", 'c')
+/* (automata_option string) describes option for generation of
+ automata. Currently there are the following options:
-/* These unary operations are used to represent incrementation
- and decrementation as they occur in memory addresses.
- The amount of increment or decrement are not represented
- because they can be understood from the machine-mode of the
- containing MEM. These operations exist in only two cases:
- 1. pushes onto the stack.
- 2. created automatically by the life_analysis pass in flow.c. */
-DEF_RTL_EXPR(PRE_DEC, "pre_dec", "e", 'a')
-DEF_RTL_EXPR(PRE_INC, "pre_inc", "e", 'a')
-DEF_RTL_EXPR(POST_DEC, "post_dec", "e", 'a')
-DEF_RTL_EXPR(POST_INC, "post_inc", "e", 'a')
+ o "no-minimization" which makes no minimization of automata. This
+ is only worth to do when we are debugging the description and
+ need to look more accurately at reservations of states.
-/* These binary operations are used to represent generic address
- side-effects in memory addresses, except for simple incrementation
- or decrementation which use the above operations. They are
- created automatically by the life_analysis pass in flow.c.
- The first operand is a REG which is used as the address.
- The second operand is an expression that is assigned to the
- register, either before (PRE_MODIFY) or after (POST_MODIFY)
- evaluating the address.
- Currently, the compiler can only handle second operands of the
- form (plus (reg) (reg)) and (plus (reg) (const_int)), where
- the first operand of the PLUS has to be the same register as
- the first operand of the *_MODIFY. */
-DEF_RTL_EXPR(PRE_MODIFY, "pre_modify", "ee", 'a')
-DEF_RTL_EXPR(POST_MODIFY, "post_modify", "ee", 'a')
+ o "time" which means printing additional time statistics about
+ generation of automata.
-/* Comparison operations. The ordered comparisons exist in two
- flavors, signed and unsigned. */
-DEF_RTL_EXPR(NE, "ne", "ee", '<')
-DEF_RTL_EXPR(EQ, "eq", "ee", '<')
-DEF_RTL_EXPR(GE, "ge", "ee", '<')
-DEF_RTL_EXPR(GT, "gt", "ee", '<')
-DEF_RTL_EXPR(LE, "le", "ee", '<')
-DEF_RTL_EXPR(LT, "lt", "ee", '<')
-DEF_RTL_EXPR(GEU, "geu", "ee", '<')
-DEF_RTL_EXPR(GTU, "gtu", "ee", '<')
-DEF_RTL_EXPR(LEU, "leu", "ee", '<')
-DEF_RTL_EXPR(LTU, "ltu", "ee", '<')
+ o "v" which means generation of file describing the result
+ automata. The file has suffix `.dfa' and can be used for the
+ description verification and debugging.
-/* Additional floating point unordered comparison flavors. */
-DEF_RTL_EXPR(UNORDERED, "unordered", "ee", '<')
-DEF_RTL_EXPR(ORDERED, "ordered", "ee", '<')
+ o "w" which means generation of warning instead of error for
+ non-critical errors.
-/* These are equivalent to unordered or ... */
-DEF_RTL_EXPR(UNEQ, "uneq", "ee", '<')
-DEF_RTL_EXPR(UNGE, "unge", "ee", '<')
-DEF_RTL_EXPR(UNGT, "ungt", "ee", '<')
-DEF_RTL_EXPR(UNLE, "unle", "ee", '<')
-DEF_RTL_EXPR(UNLT, "unlt", "ee", '<')
+ o "ndfa" which makes nondeterministic finite state automata.
-/* This is an ordered NE, ie !UNEQ, ie false for NaN. */
-DEF_RTL_EXPR(LTGT, "ltgt", "ee", '<')
+ o "progress" which means output of a progress bar showing how many
+ states were generated so far for automaton being processed. */
+DEF_RTL_EXPR(AUTOMATA_OPTION, "automata_option", "s", RTX_EXTRA)
-/* Represents the result of sign-extending the sole operand.
- The machine modes of the operand and of the SIGN_EXTEND expression
- determine how much sign-extension is going on. */
-DEF_RTL_EXPR(SIGN_EXTEND, "sign_extend", "e", '1')
+/* (define_reservation string string) names reservation (the first
+ string) of cpu functional units (the 2nd string). Sometimes unit
+ reservations for different insns contain common parts. In such
+ case, you can describe common part and use its name (the 1st
+ parameter) in regular expression in define_insn_reservation. All
+ define_reservations, define_cpu_units, and define_query_cpu_units
+ should have unique names which may not be "nothing". */
+DEF_RTL_EXPR(DEFINE_RESERVATION, "define_reservation", "ss", RTX_EXTRA)
-/* Similar for zero-extension (such as unsigned short to int). */
-DEF_RTL_EXPR(ZERO_EXTEND, "zero_extend", "e", '1')
+/* (define_insn_reservation name default_latency condition regexpr)
+ describes reservation of cpu functional units (the 3nd operand) for
+ instruction which is selected by the condition (the 2nd parameter).
+ The first parameter is used for output of debugging information.
+ The reservations are described by a regular expression according
+ the following syntax:
-/* Similar but here the operand has a wider mode. */
-DEF_RTL_EXPR(TRUNCATE, "truncate", "e", '1')
+ regexp = regexp "," oneof
+ | oneof
-/* Similar for extending floating-point values (such as SFmode to DFmode). */
-DEF_RTL_EXPR(FLOAT_EXTEND, "float_extend", "e", '1')
-DEF_RTL_EXPR(FLOAT_TRUNCATE, "float_truncate", "e", '1')
+ oneof = oneof "|" allof
+ | allof
-/* Conversion of fixed point operand to floating point value. */
-DEF_RTL_EXPR(FLOAT, "float", "e", '1')
+ allof = allof "+" repeat
+ | repeat
-/* With fixed-point machine mode:
- Conversion of floating point operand to fixed point value.
- Value is defined only when the operand's value is an integer.
- With floating-point machine mode (and operand with same mode):
- Operand is rounded toward zero to produce an integer value
- represented in floating point. */
-DEF_RTL_EXPR(FIX, "fix", "e", '1')
+ repeat = element "*" number
+ | element
-/* Conversion of unsigned fixed point operand to floating point value. */
-DEF_RTL_EXPR(UNSIGNED_FLOAT, "unsigned_float", "e", '1')
+ element = cpu_function_unit_name
+ | reservation_name
+ | result_name
+ | "nothing"
+ | "(" regexp ")"
-/* With fixed-point machine mode:
- Conversion of floating point operand to *unsigned* fixed point value.
- Value is defined only when the operand's value is an integer. */
-DEF_RTL_EXPR(UNSIGNED_FIX, "unsigned_fix", "e", '1')
+ 1. "," is used for describing start of the next cycle in
+ reservation.
-/* Absolute value */
-DEF_RTL_EXPR(ABS, "abs", "e", '1')
+ 2. "|" is used for describing the reservation described by the
+ first regular expression *or* the reservation described by the
+ second regular expression *or* etc.
-/* Square root */
-DEF_RTL_EXPR(SQRT, "sqrt", "e", '1')
+ 3. "+" is used for describing the reservation described by the
+ first regular expression *and* the reservation described by the
+ second regular expression *and* etc.
-/* Find first bit that is set.
- Value is 1 + number of trailing zeros in the arg.,
- or 0 if arg is 0. */
-DEF_RTL_EXPR(FFS, "ffs", "e", '1')
+ 4. "*" is used for convenience and simply means sequence in
+ which the regular expression are repeated NUMBER times with
+ cycle advancing (see ",").
-/* Count leading zeros. */
-DEF_RTL_EXPR(CLZ, "clz", "e", '1')
+ 5. cpu functional unit name which means its reservation.
-/* Count trailing zeros. */
-DEF_RTL_EXPR(CTZ, "ctz", "e", '1')
+ 6. reservation name -- see define_reservation.
-/* Population count (number of 1 bits). */
-DEF_RTL_EXPR(POPCOUNT, "popcount", "e", '1')
+ 7. string "nothing" means no units reservation. */
-/* Population parity (number of 1 bits modulo 2). */
-DEF_RTL_EXPR(PARITY, "parity", "e", '1')
+DEF_RTL_EXPR(DEFINE_INSN_RESERVATION, "define_insn_reservation", "sies", RTX_EXTRA)
-/* Reference to a signed bit-field of specified size and position.
- Operand 0 is the memory unit (usually SImode or QImode) which
- contains the field's first bit. Operand 1 is the width, in bits.
- Operand 2 is the number of bits in the memory unit before the
- first bit of this field.
- If BITS_BIG_ENDIAN is defined, the first bit is the msb and
- operand 2 counts from the msb of the memory unit.
- Otherwise, the first bit is the lsb and operand 2 counts from
- the lsb of the memory unit. */
-DEF_RTL_EXPR(SIGN_EXTRACT, "sign_extract", "eee", 'b')
+/* Expressions used for insn attributes. */
-/* Similar for unsigned bit-field. */
-DEF_RTL_EXPR(ZERO_EXTRACT, "zero_extract", "eee", 'b')
+/* Definition of an insn attribute.
+ 1st operand: name of the attribute
+ 2nd operand: comma-separated list of possible attribute values
+ 3rd operand: expression for the default value of the attribute. */
+DEF_RTL_EXPR(DEFINE_ATTR, "define_attr", "sse", RTX_EXTRA)
-/* For RISC machines. These save memory when splitting insns. */
+/* Marker for the name of an attribute. */
+DEF_RTL_EXPR(ATTR, "attr", "s", RTX_EXTRA)
-/* HIGH are the high-order bits of a constant expression. */
-DEF_RTL_EXPR(HIGH, "high", "e", 'o')
+/* For use in the last (optional) operand of DEFINE_INSN or DEFINE_PEEPHOLE and
+ in DEFINE_ASM_INSN to specify an attribute to assign to insns matching that
+ pattern.
-/* LO_SUM is the sum of a register and the low-order bits
- of a constant expression. */
-DEF_RTL_EXPR(LO_SUM, "lo_sum", "ee", 'o')
-
-/* Header for range information. Operand 0 is the NOTE_INSN_RANGE_BEG insn.
- Operand 1 is the NOTE_INSN_RANGE_END insn. Operand 2 is a vector of all of
- the registers that can be substituted within this range. Operand 3 is the
- number of calls in the range. Operand 4 is the number of insns in the
- range. Operand 5 is the unique range number for this range. Operand 6 is
- the basic block # of the start of the live range. Operand 7 is the basic
- block # of the end of the live range. Operand 8 is the loop depth. Operand
- 9 is a bitmap of the registers live at the start of the range. Operand 10
- is a bitmap of the registers live at the end of the range. Operand 11 is
- marker number for the start of the range. Operand 12 is the marker number
- for the end of the range. */
-DEF_RTL_EXPR(RANGE_INFO, "range_info", "uuEiiiiiibbii", 'x')
-
-/* Registers that can be substituted within the range. Operand 0 is the
- original pseudo register number. Operand 1 will be filled in with the
- pseudo register the value is copied for the duration of the range. Operand
- 2 is the number of references within the range to the register. Operand 3
- is the number of sets or clobbers of the register in the range. Operand 4
- is the number of deaths the register has. Operand 5 is the copy flags that
- give the status of whether a copy is needed from the original register to
- the new register at the beginning of the range, or whether a copy from the
- new register back to the original at the end of the range. Operand 6 is the
- live length. Operand 7 is the number of calls that this register is live
- across. Operand 8 is the symbol node of the variable if the register is a
- user variable. Operand 9 is the block node that the variable is declared
- in if the register is a user variable. */
-DEF_RTL_EXPR(RANGE_REG, "range_reg", "iiiiiiiitt", 'x')
-
-/* Information about a local variable's ranges. Operand 0 is an EXPR_LIST of
- the different ranges a variable is in where it is copied to a different
- pseudo register. Operand 1 is the block that the variable is declared in.
- Operand 2 is the number of distinct ranges. */
-DEF_RTL_EXPR(RANGE_VAR, "range_var", "eti", 'x')
-
-/* Information about the registers that are live at the current point. Operand
- 0 is the live bitmap. Operand 1 is the original block number. */
-DEF_RTL_EXPR(RANGE_LIVE, "range_live", "bi", 'x')
-
-/* A unary `__builtin_constant_p' expression. These are only emitted
- during RTL generation, and then only if optimize > 0. They are
- eliminated by the first CSE pass. */
-DEF_RTL_EXPR(CONSTANT_P_RTX, "constant_p_rtx", "e", 'x')
-
-/* A placeholder for a CALL_INSN which may be turned into a normal call,
- a sibling (tail) call or tail recursion.
-
- Immediately after RTL generation, this placeholder will be replaced
- by the insns to perform the call, sibcall or tail recursion.
-
- This RTX has 4 operands. The first three are lists of instructions to
- perform the call as a normal call, sibling call and tail recursion
- respectively. The latter two lists may be NULL, the first may never
- be NULL.
-
- The last operand is the tail recursion CODE_LABEL, which may be NULL if no
- potential tail recursive calls were found.
-
- The tail recursion label is needed so that we can clear LABEL_PRESERVE_P
- after we select a call method.
-
- This method of tail-call elimination is intended to be replaced by
- tree-based optimizations once front-end conversions are complete. */
-DEF_RTL_EXPR(CALL_PLACEHOLDER, "call_placeholder", "uuuu", 'x')
+ (set_attr "name" "value") is equivalent to
+ (set (attr "name") (const_string "value")) */
+DEF_RTL_EXPR(SET_ATTR, "set_attr", "ss", RTX_EXTRA)
-/* Describes a merge operation between two vector values.
- Operands 0 and 1 are the vectors to be merged, operand 2 is a bitmask
- that specifies where the parts of the result are taken from. Set bits
- indicate operand 0, clear bits indicate operand 1. The parts are defined
- by the mode of the vectors. */
-DEF_RTL_EXPR(VEC_MERGE, "vec_merge", "eee", '3')
+/* In the last operand of DEFINE_INSN and DEFINE_PEEPHOLE, this can be used to
+ specify that attribute values are to be assigned according to the
+ alternative matched.
-/* Describes an operation that selects parts of a vector.
- Operands 0 is the source vector, operand 1 is a PARALLEL that contains
- a CONST_INT for each of the subparts of the result vector, giving the
- number of the source subpart that should be stored into it. */
-DEF_RTL_EXPR(VEC_SELECT, "vec_select", "ee", '2')
+ The following three expressions are equivalent:
-/* Describes a vector concat operation. Operands 0 and 1 are the source
- vectors, the result is a vector that is as long as operands 0 and 1
- combined and is the concatenation of the two source vectors. */
-DEF_RTL_EXPR(VEC_CONCAT, "vec_concat", "ee", '2')
+ (set (attr "att") (cond [(eq_attrq "alternative" "1") (const_string "a1")
+ (eq_attrq "alternative" "2") (const_string "a2")]
+ (const_string "a3")))
+ (set_attr_alternative "att" [(const_string "a1") (const_string "a2")
+ (const_string "a3")])
+ (set_attr "att" "a1,a2,a3")
+ */
+DEF_RTL_EXPR(SET_ATTR_ALTERNATIVE, "set_attr_alternative", "sE", RTX_EXTRA)
-/* Describes an operation that converts a small vector into a larger one by
- duplicating the input values. The output vector mode must have the same
- submodes as the input vector mode, and the number of output parts must be
- an integer multiple of the number of input parts. */
-DEF_RTL_EXPR(VEC_DUPLICATE, "vec_duplicate", "e", '1')
-
-/* Addition with signed saturation */
-DEF_RTL_EXPR(SS_PLUS, "ss_plus", "ee", 'c')
+/* A conditional expression true if the value of the specified attribute of
+ the current insn equals the specified value. The first operand is the
+ attribute name and the second is the comparison value. */
+DEF_RTL_EXPR(EQ_ATTR, "eq_attr", "ss", RTX_EXTRA)
-/* Addition with unsigned saturation */
-DEF_RTL_EXPR(US_PLUS, "us_plus", "ee", 'c')
+/* A special case of the above representing a set of alternatives. The first
+ operand is bitmap of the set, the second one is the default value. */
+DEF_RTL_EXPR(EQ_ATTR_ALT, "eq_attr_alt", "ii", RTX_EXTRA)
-/* Operand 0 minus operand 1, with signed saturation. */
-DEF_RTL_EXPR(SS_MINUS, "ss_minus", "ee", '2')
+/* A conditional expression which is true if the specified flag is
+ true for the insn being scheduled in reorg.
-/* Operand 0 minus operand 1, with unsigned saturation. */
-DEF_RTL_EXPR(US_MINUS, "us_minus", "ee", '2')
+ genattr.c defines the following flags which can be tested by
+ (attr_flag "foo") expressions in eligible_for_delay.
-/* Signed saturating truncate. */
-DEF_RTL_EXPR(SS_TRUNCATE, "ss_truncate", "e", '1')
+ forward, backward, very_likely, likely, very_unlikely, and unlikely. */
-/* Unsigned saturating truncate. */
-DEF_RTL_EXPR(US_TRUNCATE, "us_truncate", "e", '1')
+DEF_RTL_EXPR (ATTR_FLAG, "attr_flag", "s", RTX_EXTRA)
+
+/* General conditional. The first operand is a vector composed of pairs of
+ expressions. The first element of each pair is evaluated, in turn.
+ The value of the conditional is the second expression of the first pair
+ whose first expression evaluates nonzero. If none of the expressions is
+ true, the second operand will be used as the value of the conditional. */
+DEF_RTL_EXPR(COND, "cond", "Ee", RTX_EXTRA)
+#endif /* GENERATOR_FILE */
/*
Local variables: