fixing up each insn, and generating the new insns to copy values
into the reload registers. */
\f
+struct target_reload default_target_reload;
+#if SWITCHABLE_TARGET
+struct target_reload *this_target_reload = &default_target_reload;
+#endif
+
+#define spill_indirect_levels \
+ (this_target_reload->x_spill_indirect_levels)
+
/* During reload_as_needed, element N contains a REG rtx for the hard reg
into which reg N has been reloaded (perhaps for a previous insn). */
static rtx *reg_last_reload_reg;
a round-robin fashion. */
static int last_spill_reg;
-/* Nonzero if indirect addressing is supported on the machine; this means
- that spilling (REG n) does not require reloading it into a register in
- order to do (MEM (REG n)) or (MEM (PLUS (REG n) (CONST_INT c))). The
- value indicates the level of indirect addressing supported, e.g., two
- means that (MEM (MEM (REG n))) is also valid if (REG n) does not get
- a hard register. */
-static char spill_indirect_levels;
-
-/* Nonzero if indirect addressing is supported when the innermost MEM is
- of the form (MEM (SYMBOL_REF sym)). It is assumed that the level to
- which these are valid is the same as spill_indirect_levels, above. */
-char indirect_symref_ok;
-
-/* Nonzero if an address (plus (reg frame_pointer) (reg ...)) is valid. */
-char double_reg_address_ok;
-
/* Record the stack slot for each spilled hard register. */
static rtx spill_stack_slot[FIRST_PSEUDO_REGISTER];
static int set_reload_reg (int, int);
static void choose_reload_regs_init (struct insn_chain *, rtx *);
static void choose_reload_regs (struct insn_chain *);
-static void merge_assigned_reloads (rtx);
static void emit_input_reload_insns (struct insn_chain *, struct reload *,
rtx, int);
static void emit_output_reload_insns (struct insn_chain *, struct reload *,
if (regno < FIRST_PSEUDO_REGISTER)
return;
- x = eliminate_regs (x, mem_mode, usage);
+ x = eliminate_regs_1 (x, mem_mode, usage, true, false);
if (x != *loc)
{
*loc = x;
if (reg_equiv_constant[regno])
*loc = reg_equiv_constant[regno];
+ else if (reg_equiv_invariant[regno])
+ *loc = reg_equiv_invariant[regno];
else if (reg_equiv_mem[regno])
*loc = reg_equiv_mem[regno];
else if (reg_equiv_address[regno])
/* Now see if there's a reachable block with an exceptional incoming
edge. */
FOR_EACH_BB (bb)
- if (bb->flags & BB_REACHABLE)
- FOR_EACH_EDGE (e, ei, bb->preds)
- if (e->flags & EDGE_ABNORMAL)
- return true;
+ if (bb->flags & BB_REACHABLE && bb_has_abnormal_pred (bb))
+ return true;
/* No exceptional block reached exit unexceptionally. */
return false;
spill_hard_reg (from, 1);
}
-#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
+#if !HARD_FRAME_POINTER_IS_FRAME_POINTER
if (frame_pointer_needed)
spill_hard_reg (HARD_FRAME_POINTER_REGNUM, 1);
#endif
VEC_free (rtx_p, heap, substitute_stack);
+ gcc_assert (bitmap_empty_p (&spilled_pseudos));
+
return failure;
}
return x;
case CLOBBER:
+ case ASM_OPERANDS:
gcc_assert (insn && DEBUG_INSN_P (insn));
break;
- case ASM_OPERANDS:
case SET:
gcc_unreachable ();
for (ep = reg_eliminate; ep < ®_eliminate[NUM_ELIMINABLE_REGS]; ep++)
if (ep->from_rtx == SET_DEST (old_set) && ep->can_eliminate)
{
-#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
+#if !HARD_FRAME_POINTER_IS_FRAME_POINTER
/* If this is setting the frame pointer register to the
hardware frame pointer register and this is an elimination
that will be done (tested above), this insn is really
Record the choices of reload reg in reload_reg_rtx. */
choose_reload_regs (chain);
- /* Merge any reloads that we didn't combine for fear of
- increasing the number of spill registers needed but now
- discover can be safely merged. */
- if (targetm.small_register_classes_for_mode_p (VOIDmode))
- merge_assigned_reloads (insn);
-
/* Generate the insns to reload operands into or out of
their reload regs. */
emit_reload_insns (chain);
reload_spill_index[r] = -1;
}
\f
-/* If the small_register_classes_for_mode_p target hook returns true for
- some machine modes, we may not have merged two reloads of the same item
- for fear that we might not have enough reload registers. However,
- normally they will get the same reload register and hence actually need
- not be loaded twice.
-
- Here we check for the most common case of this phenomenon: when we have
- a number of reloads for the same object, each of which were allocated
- the same reload_reg_rtx, that reload_reg_rtx is not used for any other
- reload, and is not modified in the insn itself. If we find such,
- merge all the reloads and set the resulting reload to RELOAD_OTHER.
- This will not increase the number of spill registers needed and will
- prevent redundant code. */
-
-static void
-merge_assigned_reloads (rtx insn)
-{
- int i, j;
-
- /* Scan all the reloads looking for ones that only load values and
- are not already RELOAD_OTHER and ones whose reload_reg_rtx are
- assigned and not modified by INSN. */
-
- for (i = 0; i < n_reloads; i++)
- {
- int conflicting_input = 0;
- int max_input_address_opnum = -1;
- int min_conflicting_input_opnum = MAX_RECOG_OPERANDS;
-
- if (rld[i].in == 0 || rld[i].when_needed == RELOAD_OTHER
- || rld[i].out != 0 || rld[i].reg_rtx == 0
- || reg_set_p (rld[i].reg_rtx, insn))
- continue;
-
- /* Look at all other reloads. Ensure that the only use of this
- reload_reg_rtx is in a reload that just loads the same value
- as we do. Note that any secondary reloads must be of the identical
- class since the values, modes, and result registers are the
- same, so we need not do anything with any secondary reloads. */
-
- for (j = 0; j < n_reloads; j++)
- {
- if (i == j || rld[j].reg_rtx == 0
- || ! reg_overlap_mentioned_p (rld[j].reg_rtx,
- rld[i].reg_rtx))
- continue;
-
- if (rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
- && rld[j].opnum > max_input_address_opnum)
- max_input_address_opnum = rld[j].opnum;
-
- /* If the reload regs aren't exactly the same (e.g, different modes)
- or if the values are different, we can't merge this reload.
- But if it is an input reload, we might still merge
- RELOAD_FOR_INPUT_ADDRESS and RELOAD_FOR_OTHER_ADDRESS reloads. */
-
- if (! rtx_equal_p (rld[i].reg_rtx, rld[j].reg_rtx)
- || rld[j].out != 0 || rld[j].in == 0
- || ! rtx_equal_p (rld[i].in, rld[j].in))
- {
- if (rld[j].when_needed != RELOAD_FOR_INPUT
- || ((rld[i].when_needed != RELOAD_FOR_INPUT_ADDRESS
- || rld[i].opnum > rld[j].opnum)
- && rld[i].when_needed != RELOAD_FOR_OTHER_ADDRESS))
- break;
- conflicting_input = 1;
- if (min_conflicting_input_opnum > rld[j].opnum)
- min_conflicting_input_opnum = rld[j].opnum;
- }
- }
-
- /* If all is OK, merge the reloads. Only set this to RELOAD_OTHER if
- we, in fact, found any matching reloads. */
-
- if (j == n_reloads
- && max_input_address_opnum <= min_conflicting_input_opnum)
- {
- gcc_assert (rld[i].when_needed != RELOAD_FOR_OUTPUT);
-
- for (j = 0; j < n_reloads; j++)
- if (i != j && rld[j].reg_rtx != 0
- && rtx_equal_p (rld[i].reg_rtx, rld[j].reg_rtx)
- && (! conflicting_input
- || rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
- || rld[j].when_needed == RELOAD_FOR_OTHER_ADDRESS))
- {
- rld[i].when_needed = RELOAD_OTHER;
- rld[j].in = 0;
- reload_spill_index[j] = -1;
- transfer_replacements (i, j);
- }
-
- /* If this is now RELOAD_OTHER, look for any reloads that
- load parts of this operand and set them to
- RELOAD_FOR_OTHER_ADDRESS if they were for inputs,
- RELOAD_OTHER for outputs. Note that this test is
- equivalent to looking for reloads for this operand
- number.
-
- We must take special care with RELOAD_FOR_OUTPUT_ADDRESS;
- it may share registers with a RELOAD_FOR_INPUT, so we can
- not change it to RELOAD_FOR_OTHER_ADDRESS. We should
- never need to, since we do not modify RELOAD_FOR_OUTPUT.
-
- It is possible that the RELOAD_FOR_OPERAND_ADDRESS
- instruction is assigned the same register as the earlier
- RELOAD_FOR_OTHER_ADDRESS instruction. Merging these two
- instructions will cause the RELOAD_FOR_OTHER_ADDRESS
- instruction to be deleted later on. */
-
- if (rld[i].when_needed == RELOAD_OTHER)
- for (j = 0; j < n_reloads; j++)
- if (rld[j].in != 0
- && rld[j].when_needed != RELOAD_OTHER
- && rld[j].when_needed != RELOAD_FOR_OTHER_ADDRESS
- && rld[j].when_needed != RELOAD_FOR_OUTPUT_ADDRESS
- && rld[j].when_needed != RELOAD_FOR_OPERAND_ADDRESS
- && (! conflicting_input
- || rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
- || rld[j].when_needed == RELOAD_FOR_INPADDR_ADDRESS)
- && reg_overlap_mentioned_for_reload_p (rld[j].in,
- rld[i].in))
- {
- int k;
-
- rld[j].when_needed
- = ((rld[j].when_needed == RELOAD_FOR_INPUT_ADDRESS
- || rld[j].when_needed == RELOAD_FOR_INPADDR_ADDRESS)
- ? RELOAD_FOR_OTHER_ADDRESS : RELOAD_OTHER);
-
- /* Check to see if we accidentally converted two
- reloads that use the same reload register with
- different inputs to the same type. If so, the
- resulting code won't work. */
- if (rld[j].reg_rtx)
- for (k = 0; k < j; k++)
- gcc_assert (rld[k].in == 0 || rld[k].reg_rtx == 0
- || rld[k].when_needed != rld[j].when_needed
- || !rtx_equal_p (rld[k].reg_rtx,
- rld[j].reg_rtx)
- || rtx_equal_p (rld[k].in,
- rld[j].in));
- }
- }
- }
-}
-\f
/* These arrays are filled by emit_reload_insns and its subroutines. */
static rtx input_reload_insns[MAX_RECOG_OPERANDS];
static rtx other_input_address_reload_insns = 0;
|| (reg_equiv_constant
[REGNO (SUBREG_REG (oldequiv))] != 0)))
|| (CONSTANT_P (oldequiv)
- && (PREFERRED_RELOAD_CLASS (oldequiv,
- REGNO_REG_CLASS (REGNO (reloadreg)))
+ && (targetm.preferred_reload_class (oldequiv,
+ REGNO_REG_CLASS (REGNO (reloadreg)))
== NO_REGS)))
real_oldequiv = rl->in;
gen_reload (reloadreg, real_oldequiv, rl->opnum,
int n_inherited = 0;
rtx i1;
rtx substed;
+ unsigned regno;
+ int nregs;
/* It is possible that this reload has been only used to set another reload
we eliminated earlier and thus deleted this instruction too. */
if (n_occurrences > n_inherited)
return;
+ regno = REGNO (reg);
+ if (regno >= FIRST_PSEUDO_REGISTER)
+ nregs = 1;
+ else
+ nregs = hard_regno_nregs[regno][GET_MODE (reg)];
+
/* If the pseudo-reg we are reloading is no longer referenced
anywhere between the store into it and here,
and we're within the same basic block, then the value can only
if (NOTE_INSN_BASIC_BLOCK_P (i1))
return;
if ((NONJUMP_INSN_P (i1) || CALL_P (i1))
- && reg_mentioned_p (reg, PATTERN (i1)))
+ && refers_to_regno_p (regno, regno + nregs, PATTERN (i1), NULL))
{
/* If this is USE in front of INSN, we only have to check that
there are no more references than accounted for by inheritance. */
BB_END (bb) = insn;
insn = NEXT_INSN (insn);
- FOR_EACH_EDGE (e, ei, bb->succs)
- if (e->flags & EDGE_FALLTHRU)
- break;
+ e = find_fallthru_edge (bb->succs);
while (insn && insn != stop)
{
OSDN Git Service
