enum insn_code *, secondary_reload_info *);
static enum reg_class find_valid_class (enum machine_mode, enum machine_mode,
int, unsigned int);
-static int reload_inner_reg_of_subreg (rtx, enum machine_mode, int);
static void push_replacement (rtx *, int, enum machine_mode);
static void dup_replacements (rtx *, rtx *);
static void combine_reloads (void);
return n_reloads;
}
-/* Return nonzero if X is a SUBREG which will require reloading of its
- SUBREG_REG expression. */
+/* Return true if X is a SUBREG that will need reloading of its SUBREG_REG
+ expression. MODE is the mode that X will be used in. OUTPUT is true if
+ the function is invoked for the output part of an enclosing reload. */
-static int
-reload_inner_reg_of_subreg (rtx x, enum machine_mode mode, int output)
+static bool
+reload_inner_reg_of_subreg (rtx x, enum machine_mode mode, bool output)
{
rtx inner;
/* Only SUBREGs are problematical. */
if (GET_CODE (x) != SUBREG)
- return 0;
+ return false;
inner = SUBREG_REG (x);
- /* If INNER is a constant or PLUS, then INNER must be reloaded. */
+ /* If INNER is a constant or PLUS, then INNER will need reloading. */
if (CONSTANT_P (inner) || GET_CODE (inner) == PLUS)
- return 1;
+ return true;
- /* If INNER is not a hard register, then INNER will not need to
- be reloaded. */
- if (!REG_P (inner)
- || REGNO (inner) >= FIRST_PSEUDO_REGISTER)
- return 0;
+ /* If INNER is not a hard register, then INNER will not need reloading. */
+ if (!(REG_P (inner) && HARD_REGISTER_P (inner)))
+ return false;
/* If INNER is not ok for MODE, then INNER will need reloading. */
- if (! HARD_REGNO_MODE_OK (subreg_regno (x), mode))
- return 1;
-
- /* If the outer part is a word or smaller, INNER larger than a
- word and the number of regs for INNER is not the same as the
- number of words in INNER, then INNER will need reloading. */
- return (GET_MODE_SIZE (mode) <= UNITS_PER_WORD
- && output
+ if (!HARD_REGNO_MODE_OK (subreg_regno (x), mode))
+ return true;
+
+ /* If this is for an output, and the outer part is a word or smaller,
+ INNER is larger than a word and the number of registers in INNER is
+ not the same as the number of words in INNER, then INNER will need
+ reloading (with an in-out reload). */
+ return (output
+ && GET_MODE_SIZE (mode) <= UNITS_PER_WORD
&& GET_MODE_SIZE (GET_MODE (inner)) > UNITS_PER_WORD
&& ((GET_MODE_SIZE (GET_MODE (inner)) / UNITS_PER_WORD)
!= (int) hard_regno_nregs[REGNO (inner)][GET_MODE (inner)]));
For machines that extend byte loads, do this for any SUBREG of a pseudo
where both M1 and M2 are a word or smaller, M1 is wider than M2, and
M2 is an integral mode that gets extended when loaded.
- Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R where
- either M1 is not valid for R or M2 is wider than a word but we only
- need one word to store an M2-sized quantity in R.
+ Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R
+ where either M1 is not valid for R or M2 is wider than a word but we
+ only need one register to store an M2-sized quantity in R.
(However, if OUT is nonzero, we need to reload the reg *and*
the subreg, so do nothing here, and let following statement handle it.)
inmode = GET_MODE (in);
}
- /* Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R where
- either M1 is not valid for R or M2 is wider than a word but we only
- need one word to store an M2-sized quantity in R.
+ /* Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R
+ where M1 is not valid for R if it was not handled by the code above.
+
+ Similar issue for (SUBREG constant ...) if it was not handled by the
+ code above. This can happen if SUBREG_BYTE != 0.
However, we must reload the inner reg *as well as* the subreg in
that case. */
- /* Similar issue for (SUBREG constant ...) if it was not handled by the
- code above. This can happen if SUBREG_BYTE != 0. */
-
- if (in != 0 && reload_inner_reg_of_subreg (in, inmode, 0))
+ if (in != 0 && reload_inner_reg_of_subreg (in, inmode, false))
{
enum reg_class in_class = rclass;
/* Similarly for paradoxical and problematical SUBREGs on the output.
Note that there is no reason we need worry about the previous value
- of SUBREG_REG (out); even if wider than out,
- storing in a subreg is entitled to clobber it all
- (except in the case of STRICT_LOW_PART,
- and in that case the constraint should label it input-output.) */
+ of SUBREG_REG (out); even if wider than out, storing in a subreg is
+ entitled to clobber it all (except in the case of a word mode subreg
+ or of a STRICT_LOW_PART, in that latter case the constraint should
+ label it input-output.) */
if (out != 0 && GET_CODE (out) == SUBREG
&& (subreg_lowpart_p (out) || strict_low)
#ifdef CANNOT_CHANGE_MODE_CLASS
))
|| (REG_P (SUBREG_REG (out))
&& REGNO (SUBREG_REG (out)) < FIRST_PSEUDO_REGISTER
- && ((GET_MODE_SIZE (outmode) <= UNITS_PER_WORD
- && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
- > UNITS_PER_WORD)
- && ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
- / UNITS_PER_WORD)
- != (int) hard_regno_nregs[REGNO (SUBREG_REG (out))]
- [GET_MODE (SUBREG_REG (out))]))
- || ! HARD_REGNO_MODE_OK (subreg_regno (out), outmode)))
+ /* The case of a word mode subreg
+ is handled differently in the following statement. */
+ && ! (GET_MODE_SIZE (outmode) <= UNITS_PER_WORD
+ && (GET_MODE_SIZE (GET_MODE (SUBREG_REG (out)))
+ > UNITS_PER_WORD))
+ && ! HARD_REGNO_MODE_OK (subreg_regno (out), outmode))
|| (secondary_reload_class (0, rclass, outmode, out) != NO_REGS
&& (secondary_reload_class (0, rclass, GET_MODE (SUBREG_REG (out)),
SUBREG_REG (out))
outmode = GET_MODE (out);
}
- /* Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R where
- either M1 is not valid for R or M2 is wider than a word but we only
- need one word to store an M2-sized quantity in R.
+ /* Similar issue for (SUBREG:M1 (REG:M2 ...) ...) for a hard register R
+ where either M1 is not valid for R or M2 is wider than a word but we
+ only need one register to store an M2-sized quantity in R.
However, we must reload the inner reg *as well as* the subreg in
- that case. In this case, the inner reg is an in-out reload. */
+ that case and the inner reg is an in-out reload. */
- if (out != 0 && reload_inner_reg_of_subreg (out, outmode, 1))
+ if (out != 0 && reload_inner_reg_of_subreg (out, outmode, true))
{
+ enum reg_class in_out_class
+ = find_valid_class (outmode, GET_MODE (SUBREG_REG (out)),
+ subreg_regno_offset (REGNO (SUBREG_REG (out)),
+ GET_MODE (SUBREG_REG (out)),
+ SUBREG_BYTE (out),
+ GET_MODE (out)),
+ REGNO (SUBREG_REG (out)));
+
/* This relies on the fact that emit_reload_insns outputs the
instructions for output reloads of type RELOAD_OTHER in reverse
order of the reloads. Thus if the outer reload is also of type
RELOAD_OTHER, we are guaranteed that this inner reload will be
output after the outer reload. */
- dont_remove_subreg = 1;
push_reload (SUBREG_REG (out), SUBREG_REG (out), &SUBREG_REG (out),
- &SUBREG_REG (out),
- find_valid_class (outmode, GET_MODE (SUBREG_REG (out)),
- subreg_regno_offset (REGNO (SUBREG_REG (out)),
- GET_MODE (SUBREG_REG (out)),
- SUBREG_BYTE (out),
- GET_MODE (out)),
- REGNO (SUBREG_REG (out))),
- VOIDmode, VOIDmode, 0, 0,
- opnum, RELOAD_OTHER);
+ &SUBREG_REG (out), in_out_class, VOIDmode, VOIDmode,
+ 0, 0, opnum, RELOAD_OTHER);
+ dont_remove_subreg = 1;
}
/* If IN appears in OUT, we can't share any input-only reload for IN. */
&& rld[i].when_needed != RELOAD_FOR_OUTPUT_ADDRESS
&& rld[i].when_needed != RELOAD_FOR_OUTADDR_ADDRESS
&& rld[i].when_needed != RELOAD_OTHER
- && (CLASS_MAX_NREGS (rld[i].rclass, rld[i].inmode)
- == CLASS_MAX_NREGS (rld[output_reload].rclass,
- rld[output_reload].outmode))
+ && (ira_reg_class_max_nregs [(int)rld[i].rclass][(int) rld[i].inmode]
+ == ira_reg_class_max_nregs [(int) rld[output_reload].rclass]
+ [(int) rld[output_reload].outmode])
&& rld[i].inc == 0
&& rld[i].reg_rtx == 0
#ifdef SECONDARY_MEMORY_NEEDED
/* Address operands are reloaded in their existing mode,
no matter what is specified in the machine description. */
operand_mode[i] = GET_MODE (recog_data.operand[i]);
+
+ /* If the address is a single CONST_INT pick address mode
+ instead otherwise we will later not know in which mode
+ the reload should be performed. */
+ if (operand_mode[i] == VOIDmode)
+ operand_mode[i] = Pmode;
+
}
else if (code == MEM)
{
> GET_MODE_SIZE (rld[i].inmode)))
? rld[i].outmode : rld[i].inmode;
- rld[i].nregs = CLASS_MAX_NREGS (rld[i].rclass, rld[i].mode);
+ rld[i].nregs = ira_reg_class_max_nregs [rld[i].rclass][rld[i].mode];
}
/* Special case a simple move with an input reload and a
/* Skip alternatives before the one requested. */
while (altnum > 0)
{
- while (*constraint++ != ',');
+ while (*constraint++ != ',')
+ ;
altnum--;
}
/* Scan the requested alternative for TARGET_MEM_CONSTRAINT or 'o'.
else
{
enum reg_class rclass = context_reg_class;
- if ((unsigned) CLASS_MAX_NREGS (rclass, GET_MODE (SUBREG_REG (x)))
- > reg_class_size[rclass])
+ if (ira_reg_class_max_nregs [rclass][GET_MODE (SUBREG_REG (x))]
+ > reg_class_size[(int) rclass])
{
x = find_reloads_subreg_address (x, 0, opnum,
ADDR_TYPE (type),
XEXP (tem, 0) = plus_constant (XEXP (tem, 0), offset);
PUT_MODE (tem, GET_MODE (x));
- if (MEM_OFFSET (tem))
- set_mem_offset (tem, plus_constant (MEM_OFFSET (tem), offset));
- if (MEM_SIZE (tem)
- && INTVAL (MEM_SIZE (tem)) != (HOST_WIDE_INT) outer_size)
- set_mem_size (tem, GEN_INT (outer_size));
+ if (MEM_OFFSET_KNOWN_P (tem))
+ set_mem_offset (tem, MEM_OFFSET (tem) + offset);
+ if (MEM_SIZE_KNOWN_P (tem)
+ && MEM_SIZE (tem) != (HOST_WIDE_INT) outer_size)
+ set_mem_size (tem, outer_size);
/* If this was a paradoxical subreg that we replaced, the
resulting memory must be sufficiently aligned to allow
{
rtx elt = XVECEXP (PATTERN (insn), 0, i);
if ((GET_CODE (elt) == CLOBBER
- || (sets == 1 && GET_CODE (PATTERN (insn)) == SET))
+ || (sets == 1 && GET_CODE (elt) == SET))
&& REG_P (XEXP (elt, 0)))
{
unsigned int test = REGNO (XEXP (elt, 0));
OSDN Git Service
