/* Compute register class preferences for pseudo-registers.
- Copyright (C) 1987, 88, 91-97, 1998 Free Software Foundation, Inc.
+ Copyright (C) 1987, 88, 91-98, 1999 Free Software Foundation, Inc.
This file is part of GNU CC.
and a function init_reg_sets to initialize the tables. */
#include "config.h"
-#include <stdio.h>
-#if HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
+#include "system.h"
#include "rtl.h"
#include "hard-reg-set.h"
#include "flags.h"
#include "recog.h"
#include "reload.h"
#include "real.h"
+#include "toplev.h"
+#include "output.h"
#ifndef REGISTER_MOVE_COST
#define REGISTER_MOVE_COST(x, y) 2
#endif
-#ifndef MEMORY_MOVE_COST
-#define MEMORY_MOVE_COST(x) 4
-#endif
+static void init_reg_sets_1 PROTO((void));
+static void init_reg_modes PROTO((void));
/* If we have auto-increment or auto-decrement and we can have secondary
reloads, we are not allowed to use classes requiring secondary
/* Indexed by hard register number, contains 1 for registers
that are fixed use (stack pointer, pc, frame pointer, etc.).
These are the registers that cannot be used to allocate
- a pseudo reg whose life does not cross calls. */
+ a pseudo reg for general use. */
char fixed_regs[FIRST_PSEUDO_REGISTER];
/* Indexed by hard register number, contains 1 for registers
that are fixed use or are clobbered by function calls.
These are the registers that cannot be used to allocate
- a pseudo reg whose life crosses calls. */
+ a pseudo reg whose life crosses calls unless we are able
+ to save/restore them across the calls. */
char call_used_regs[FIRST_PSEUDO_REGISTER];
static char initial_call_used_regs[] = CALL_USED_REGISTERS;
/* Indexed by hard register number, contains 1 for registers that are
- fixed use -- i.e. in fixed_regs -- or a function value return register
- or STRUCT_VALUE_REGNUM or STATIC_CHAIN_REGNUM. These are the
- registers that cannot hold quantities across calls even if we are
- willing to save and restore them. */
+ fixed use or call used registers that cannot hold quantities across
+ calls even if we are willing to save and restore them. call fixed
+ registers are a subset of call used registers. */
char call_fixed_regs[FIRST_PSEUDO_REGISTER];
#endif /* FORBIDDEN_INC_DEC_CLASSES */
+#ifdef HAVE_SECONDARY_RELOADS
+
+/* Sample MEM values for use by memory_move_secondary_cost. */
+
+static rtx top_of_stack[MAX_MACHINE_MODE];
+
+#endif /* HAVE_SECONDARY_RELOADS */
+
+/* Linked list of reg_info structures allocated for reg_n_info array.
+ Grouping all of the allocated structures together in one lump
+ means only one call to bzero to clear them, rather than n smaller
+ calls. */
+struct reg_info_data {
+ struct reg_info_data *next; /* next set of reg_info structures */
+ size_t min_index; /* minimum index # */
+ size_t max_index; /* maximum index # */
+ char used_p; /* non-zero if this has been used previously */
+ reg_info data[1]; /* beginning of the reg_info data */
+};
+
+static struct reg_info_data *reg_info_head;
+
+
/* Function called only once to initialize the above data on reg usage.
Once this is done, various switches may override. */
bcopy (initial_call_used_regs, call_used_regs, sizeof call_used_regs);
bzero (global_regs, sizeof global_regs);
+ /* Do any additional initialization regsets may need */
+ INIT_ONCE_REG_SET ();
+}
+
+/* After switches have been processed, which perhaps alter
+ `fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */
+
+static void
+init_reg_sets_1 ()
+{
+ register unsigned int i, j;
+
+ /* This macro allows the fixed or call-used registers
+ and the register classes to depend on target flags. */
+
+#ifdef CONDITIONAL_REGISTER_USAGE
+ CONDITIONAL_REGISTER_USAGE;
+#endif
+
/* Compute number of hard regs in each class. */
bzero ((char *) reg_class_size, sizeof reg_class_size);
}
}
- /* Do any additional initialization regsets may need */
- INIT_ONCE_REG_SET ();
-}
-
-/* After switches have been processed, which perhaps alter
- `fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */
-
-static void
-init_reg_sets_1 ()
-{
- register unsigned int i, j;
-
- /* This macro allows the fixed or call-used registers
- to depend on target flags. */
-
-#ifdef CONDITIONAL_REGISTER_USAGE
- CONDITIONAL_REGISTER_USAGE;
-#endif
-
/* Initialize "constant" tables. */
CLEAR_HARD_REG_SET (fixed_reg_set);
init_reg_sets_1 ();
init_reg_modes ();
+
+#ifdef HAVE_SECONDARY_RELOADS
+ {
+ /* Make some fake stack-frame MEM references for use in
+ memory_move_secondary_cost. */
+ int i;
+ for (i = 0; i < MAX_MACHINE_MODE; i++)
+ top_of_stack[i] = gen_rtx_MEM (i, stack_pointer_rtx);
+ }
+#endif
+}
+
+#ifdef HAVE_SECONDARY_RELOADS
+
+/* Compute extra cost of moving registers to/from memory due to reloads.
+ Only needed if secondary reloads are required for memory moves. */
+
+int
+memory_move_secondary_cost (mode, class, in)
+ enum machine_mode mode;
+ enum reg_class class;
+ int in;
+{
+ enum reg_class altclass;
+ int partial_cost = 0;
+ /* We need a memory reference to feed to SECONDARY... macros. */
+ rtx mem = top_of_stack[(int) mode];
+
+ if (in)
+ {
+#ifdef SECONDARY_INPUT_RELOAD_CLASS
+ altclass = SECONDARY_INPUT_RELOAD_CLASS (class, mode, mem);
+#else
+ altclass = NO_REGS;
+#endif
+ }
+ else
+ {
+#ifdef SECONDARY_OUTPUT_RELOAD_CLASS
+ altclass = SECONDARY_OUTPUT_RELOAD_CLASS (class, mode, mem);
+#else
+ altclass = NO_REGS;
+#endif
+ }
+
+ if (altclass == NO_REGS)
+ return 0;
+
+ if (in)
+ partial_cost = REGISTER_MOVE_COST (altclass, class);
+ else
+ partial_cost = REGISTER_MOVE_COST (class, altclass);
+
+ if (class == altclass)
+ /* This isn't simply a copy-to-temporary situation. Can't guess
+ what it is, so MEMORY_MOVE_COST really ought not to be calling
+ here in that case.
+
+ I'm tempted to put in an abort here, but returning this will
+ probably only give poor estimates, which is what we would've
+ had before this code anyways. */
+ return partial_cost;
+
+ /* Check if the secondary reload register will also need a
+ secondary reload. */
+ return memory_move_secondary_cost (mode, altclass, in) + partial_cost;
}
+#endif
/* Return a machine mode that is legitimate for hard reg REGNO and large
enough to save nregs. If we can't find one, return VOIDmode. */
if ((i = decode_reg_name (name)) >= 0)
{
- fixed_regs[i] = fixed;
- call_used_regs[i] = call_used;
+ if ((i == STACK_POINTER_REGNUM
+#ifdef HARD_FRAME_POINTER_REGNUM
+ || i == HARD_FRAME_POINTER_REGNUM
+#else
+ || i == FRAME_POINTER_REGNUM
+#endif
+ )
+ && (fixed == 0 || call_used == 0))
+ {
+ static char* what_option[2][2] = {
+ { "call-saved", "call-used" },
+ { "no-such-option", "fixed" }};
+
+ error ("can't use '%s' as a %s register", name,
+ what_option[fixed][call_used]);
+ }
+ else
+ {
+ fixed_regs[i] = fixed;
+ call_used_regs[i] = call_used;
+ }
}
else
{
static struct costs *costs;
+/* Initialized once, and used to initialize cost values for each insn. */
+
+static struct costs init_cost;
+
/* Record the same data by operand number, accumulated for each alternative
in an insn. The contribution to a pseudo is that of the minimum-cost
alternative. */
static char *altclass;
+/* Allocated buffers for prefclass and altclass. */
+static char *prefclass_buffer;
+static char *altclass_buffer;
+
/* Record the depth of loops that we are in. */
static int loop_depth;
static int loop_cost;
+static rtx scan_one_insn PROTO((rtx, int));
static void record_reg_classes PROTO((int, int, rtx *, enum machine_mode *,
- char **, rtx));
+ const char **, rtx));
static int copy_cost PROTO((rtx, enum machine_mode,
enum reg_class, int));
static void record_address_regs PROTO((rtx, enum reg_class, int));
#ifdef FORBIDDEN_INC_DEC_CLASSES
static int auto_inc_dec_reg_p PROTO((rtx, enum machine_mode));
#endif
-static void reg_scan_mark_refs PROTO((rtx, rtx, int));
+static void reg_scan_mark_refs PROTO((rtx, rtx, int, int));
/* Return the reg_class in which pseudo reg number REGNO is best allocated.
This function is sometimes called before the info has been computed.
return (enum reg_class) altclass[regno];
}
-/* This prevents dump_flow_info from losing if called
- before regclass is run. */
+/* Initialize some global data for this pass. */
void
regclass_init ()
{
+ int i;
+
+ init_cost.mem_cost = 10000;
+ for (i = 0; i < N_REG_CLASSES; i++)
+ init_cost.cost[i] = 10000;
+
+ /* This prevents dump_flow_info from losing if called
+ before regclass is run. */
prefclass = 0;
}
\f
+/* Subroutine of regclass, processes one insn INSN. Scan it and record each
+ time it would save code to put a certain register in a certain class.
+ PASS, when nonzero, inhibits some optimizations which need only be done
+ once.
+ Return the last insn processed, so that the scan can be continued from
+ there. */
+
+static rtx
+scan_one_insn (insn, pass)
+ rtx insn;
+ int pass;
+{
+ enum rtx_code code = GET_CODE (insn);
+ enum rtx_code pat_code;
+ const char *constraints[MAX_RECOG_OPERANDS];
+ enum machine_mode modes[MAX_RECOG_OPERANDS];
+ rtx set, note;
+ int i, j;
+
+ /* Show that an insn inside a loop is likely to be executed three
+ times more than insns outside a loop. This is much more aggressive
+ than the assumptions made elsewhere and is being tried as an
+ experiment. */
+
+ if (code == NOTE)
+ {
+ if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
+ loop_depth++, loop_cost = 1 << (2 * MIN (loop_depth, 5));
+ else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
+ loop_depth--, loop_cost = 1 << (2 * MIN (loop_depth, 5));
+
+ return insn;
+ }
+
+ if (GET_RTX_CLASS (code) != 'i')
+ return insn;
+
+ pat_code = GET_CODE (PATTERN (insn));
+ if (pat_code == USE
+ || pat_code == CLOBBER
+ || pat_code == ASM_INPUT
+ || pat_code == ADDR_VEC
+ || pat_code == ADDR_DIFF_VEC)
+ return insn;
+
+ set = single_set (insn);
+ extract_insn (insn);
+
+ for (i = 0; i < recog_n_operands; i++)
+ {
+ constraints[i] = recog_constraints[i];
+ modes[i] = recog_operand_mode[i];
+ }
+
+ /* If this insn loads a parameter from its stack slot, then
+ it represents a savings, rather than a cost, if the
+ parameter is stored in memory. Record this fact. */
+
+ if (set != 0 && GET_CODE (SET_DEST (set)) == REG
+ && GET_CODE (SET_SRC (set)) == MEM
+ && (note = find_reg_note (insn, REG_EQUIV,
+ NULL_RTX)) != 0
+ && GET_CODE (XEXP (note, 0)) == MEM)
+ {
+ costs[REGNO (SET_DEST (set))].mem_cost
+ -= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set)),
+ GENERAL_REGS, 1)
+ * loop_cost);
+ record_address_regs (XEXP (SET_SRC (set), 0),
+ BASE_REG_CLASS, loop_cost * 2);
+ return insn;
+ }
+
+ /* Improve handling of two-address insns such as
+ (set X (ashift CONST Y)) where CONST must be made to
+ match X. Change it into two insns: (set X CONST)
+ (set X (ashift X Y)). If we left this for reloading, it
+ would probably get three insns because X and Y might go
+ in the same place. This prevents X and Y from receiving
+ the same hard reg.
+
+ We can only do this if the modes of operands 0 and 1
+ (which might not be the same) are tieable and we only need
+ do this during our first pass. */
+
+ if (pass == 0 && optimize
+ && recog_n_operands >= 3
+ && recog_constraints[1][0] == '0'
+ && recog_constraints[1][1] == 0
+ && CONSTANT_P (recog_operand[1])
+ && ! rtx_equal_p (recog_operand[0], recog_operand[1])
+ && ! rtx_equal_p (recog_operand[0], recog_operand[2])
+ && GET_CODE (recog_operand[0]) == REG
+ && MODES_TIEABLE_P (GET_MODE (recog_operand[0]),
+ recog_operand_mode[1]))
+ {
+ rtx previnsn = prev_real_insn (insn);
+ rtx dest
+ = gen_lowpart (recog_operand_mode[1],
+ recog_operand[0]);
+ rtx newinsn
+ = emit_insn_before (gen_move_insn (dest,
+ recog_operand[1]),
+ insn);
+
+ /* If this insn was the start of a basic block,
+ include the new insn in that block.
+ We need not check for code_label here;
+ while a basic block can start with a code_label,
+ INSN could not be at the beginning of that block. */
+ if (previnsn == 0 || GET_CODE (previnsn) == JUMP_INSN)
+ {
+ int b;
+ for (b = 0; b < n_basic_blocks; b++)
+ if (insn == BLOCK_HEAD (b))
+ BLOCK_HEAD (b) = newinsn;
+ }
+
+ /* This makes one more setting of new insns's dest. */
+ REG_N_SETS (REGNO (recog_operand[0]))++;
+
+ *recog_operand_loc[1] = recog_operand[0];
+ for (i = recog_n_dups - 1; i >= 0; i--)
+ if (recog_dup_num[i] == 1)
+ *recog_dup_loc[i] = recog_operand[0];
+
+ return PREV_INSN (newinsn);
+ }
+
+ /* If we get here, we are set up to record the costs of all the
+ operands for this insn. Start by initializing the costs.
+ Then handle any address registers. Finally record the desired
+ classes for any pseudos, doing it twice if some pair of
+ operands are commutative. */
+
+ for (i = 0; i < recog_n_operands; i++)
+ {
+ op_costs[i] = init_cost;
+
+ if (GET_CODE (recog_operand[i]) == SUBREG)
+ recog_operand[i] = SUBREG_REG (recog_operand[i]);
+
+ if (GET_CODE (recog_operand[i]) == MEM)
+ record_address_regs (XEXP (recog_operand[i], 0),
+ BASE_REG_CLASS, loop_cost * 2);
+ else if (constraints[i][0] == 'p')
+ record_address_regs (recog_operand[i],
+ BASE_REG_CLASS, loop_cost * 2);
+ }
+
+ /* Check for commutative in a separate loop so everything will
+ have been initialized. We must do this even if one operand
+ is a constant--see addsi3 in m68k.md. */
+
+ for (i = 0; i < recog_n_operands - 1; i++)
+ if (constraints[i][0] == '%')
+ {
+ const char *xconstraints[MAX_RECOG_OPERANDS];
+ int j;
+
+ /* Handle commutative operands by swapping the constraints.
+ We assume the modes are the same. */
+
+ for (j = 0; j < recog_n_operands; j++)
+ xconstraints[j] = constraints[j];
+
+ xconstraints[i] = constraints[i+1];
+ xconstraints[i+1] = constraints[i];
+ record_reg_classes (recog_n_alternatives, recog_n_operands,
+ recog_operand, modes, xconstraints,
+ insn);
+ }
+
+ record_reg_classes (recog_n_alternatives, recog_n_operands, recog_operand,
+ modes, constraints, insn);
+
+ /* Now add the cost for each operand to the total costs for
+ its register. */
+
+ for (i = 0; i < recog_n_operands; i++)
+ if (GET_CODE (recog_operand[i]) == REG
+ && REGNO (recog_operand[i]) >= FIRST_PSEUDO_REGISTER)
+ {
+ int regno = REGNO (recog_operand[i]);
+ struct costs *p = &costs[regno], *q = &op_costs[i];
+
+ p->mem_cost += q->mem_cost * loop_cost;
+ for (j = 0; j < N_REG_CLASSES; j++)
+ p->cost[j] += q->cost[j] * loop_cost;
+ }
+
+ return insn;
+}
+
/* This is a pass of the compiler that scans all instructions
and calculates the preferred class for each pseudo-register.
This information can be accessed later by calling `reg_preferred_class'.
{
#ifdef REGISTER_CONSTRAINTS
register rtx insn;
- register int i, j;
- struct costs init_cost;
- rtx set;
+ register int i;
int pass;
init_recog ();
- costs = (struct costs *) alloca (nregs * sizeof (struct costs));
+ costs = (struct costs *) xmalloc (nregs * sizeof (struct costs));
#ifdef FORBIDDEN_INC_DEC_CLASSES
{
rtx r = gen_rtx_REG (VOIDmode, 0);
enum machine_mode m;
+ register int j;
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (TEST_HARD_REG_BIT (reg_class_contents[i], j))
}
#endif /* FORBIDDEN_INC_DEC_CLASSES */
- init_cost.mem_cost = 10000;
- for (i = 0; i < N_REG_CLASSES; i++)
- init_cost.cost[i] = 10000;
-
/* Normally we scan the insns once and determine the best class to use for
each register. However, if -fexpensive_optimizations are on, we do so
twice, the second time using the tentative best classes to guide the
for (insn = f; insn; insn = NEXT_INSN (insn))
{
- char *constraints[MAX_RECOG_OPERANDS];
- enum machine_mode modes[MAX_RECOG_OPERANDS];
- int nalternatives;
- int noperands;
-
- /* Show that an insn inside a loop is likely to be executed three
- times more than insns outside a loop. This is much more aggressive
- than the assumptions made elsewhere and is being tried as an
- experiment. */
-
- if (GET_CODE (insn) == NOTE
- && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- loop_depth++, loop_cost = 1 << (2 * MIN (loop_depth, 5));
- else if (GET_CODE (insn) == NOTE
- && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- loop_depth--, loop_cost = 1 << (2 * MIN (loop_depth, 5));
-
- else if ((GET_CODE (insn) == INSN
- && GET_CODE (PATTERN (insn)) != USE
- && GET_CODE (PATTERN (insn)) != CLOBBER
- && GET_CODE (PATTERN (insn)) != ASM_INPUT)
- || (GET_CODE (insn) == JUMP_INSN
- && GET_CODE (PATTERN (insn)) != ADDR_VEC
- && GET_CODE (PATTERN (insn)) != ADDR_DIFF_VEC)
- || GET_CODE (insn) == CALL_INSN)
- {
- if (GET_CODE (insn) == INSN
- && (noperands = asm_noperands (PATTERN (insn))) >= 0)
- {
- decode_asm_operands (PATTERN (insn), recog_operand, NULL_PTR,
- constraints, modes);
- nalternatives = (noperands == 0 ? 0
- : n_occurrences (',', constraints[0]) + 1);
- }
- else
- {
- int insn_code_number = recog_memoized (insn);
- rtx note;
-
- set = single_set (insn);
- insn_extract (insn);
-
- nalternatives = insn_n_alternatives[insn_code_number];
- noperands = insn_n_operands[insn_code_number];
-
- /* If this insn loads a parameter from its stack slot, then
- it represents a savings, rather than a cost, if the
- parameter is stored in memory. Record this fact. */
-
- if (set != 0 && GET_CODE (SET_DEST (set)) == REG
- && GET_CODE (SET_SRC (set)) == MEM
- && (note = find_reg_note (insn, REG_EQUIV,
- NULL_RTX)) != 0
- && GET_CODE (XEXP (note, 0)) == MEM)
- {
- costs[REGNO (SET_DEST (set))].mem_cost
- -= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set)))
- * loop_cost);
- record_address_regs (XEXP (SET_SRC (set), 0),
- BASE_REG_CLASS, loop_cost * 2);
- continue;
- }
-
- /* Improve handling of two-address insns such as
- (set X (ashift CONST Y)) where CONST must be made to
- match X. Change it into two insns: (set X CONST)
- (set X (ashift X Y)). If we left this for reloading, it
- would probably get three insns because X and Y might go
- in the same place. This prevents X and Y from receiving
- the same hard reg.
-
- We can only do this if the modes of operands 0 and 1
- (which might not be the same) are tieable and we only need
- do this during our first pass. */
-
- if (pass == 0 && optimize
- && noperands >= 3
- && insn_operand_constraint[insn_code_number][1][0] == '0'
- && insn_operand_constraint[insn_code_number][1][1] == 0
- && CONSTANT_P (recog_operand[1])
- && ! rtx_equal_p (recog_operand[0], recog_operand[1])
- && ! rtx_equal_p (recog_operand[0], recog_operand[2])
- && GET_CODE (recog_operand[0]) == REG
- && MODES_TIEABLE_P (GET_MODE (recog_operand[0]),
- insn_operand_mode[insn_code_number][1]))
- {
- rtx previnsn = prev_real_insn (insn);
- rtx dest
- = gen_lowpart (insn_operand_mode[insn_code_number][1],
- recog_operand[0]);
- rtx newinsn
- = emit_insn_before (gen_move_insn (dest,
- recog_operand[1]),
- insn);
-
- /* If this insn was the start of a basic block,
- include the new insn in that block.
- We need not check for code_label here;
- while a basic block can start with a code_label,
- INSN could not be at the beginning of that block. */
- if (previnsn == 0 || GET_CODE (previnsn) == JUMP_INSN)
- {
- int b;
- for (b = 0; b < n_basic_blocks; b++)
- if (insn == basic_block_head[b])
- basic_block_head[b] = newinsn;
- }
-
- /* This makes one more setting of new insns's dest. */
- REG_N_SETS (REGNO (recog_operand[0]))++;
-
- *recog_operand_loc[1] = recog_operand[0];
- for (i = insn_n_dups[insn_code_number] - 1; i >= 0; i--)
- if (recog_dup_num[i] == 1)
- *recog_dup_loc[i] = recog_operand[0];
-
- insn = PREV_INSN (newinsn);
- continue;
- }
-
- for (i = 0; i < noperands; i++)
- {
- constraints[i]
- = insn_operand_constraint[insn_code_number][i];
- modes[i] = insn_operand_mode[insn_code_number][i];
- }
- }
-
- /* If we get here, we are set up to record the costs of all the
- operands for this insn. Start by initializing the costs.
- Then handle any address registers. Finally record the desired
- classes for any pseudos, doing it twice if some pair of
- operands are commutative. */
-
- for (i = 0; i < noperands; i++)
- {
- op_costs[i] = init_cost;
-
- if (GET_CODE (recog_operand[i]) == SUBREG)
- recog_operand[i] = SUBREG_REG (recog_operand[i]);
-
- if (GET_CODE (recog_operand[i]) == MEM)
- record_address_regs (XEXP (recog_operand[i], 0),
- BASE_REG_CLASS, loop_cost * 2);
- else if (constraints[i][0] == 'p')
- record_address_regs (recog_operand[i],
- BASE_REG_CLASS, loop_cost * 2);
- }
-
- /* Check for commutative in a separate loop so everything will
- have been initialized. We must do this even if one operand
- is a constant--see addsi3 in m68k.md. */
-
- for (i = 0; i < noperands - 1; i++)
- if (constraints[i][0] == '%')
- {
- char *xconstraints[MAX_RECOG_OPERANDS];
- int j;
-
- /* Handle commutative operands by swapping the constraints.
- We assume the modes are the same. */
-
- for (j = 0; j < noperands; j++)
- xconstraints[j] = constraints[j];
-
- xconstraints[i] = constraints[i+1];
- xconstraints[i+1] = constraints[i];
- record_reg_classes (nalternatives, noperands,
- recog_operand, modes, xconstraints,
- insn);
- }
-
- record_reg_classes (nalternatives, noperands, recog_operand,
- modes, constraints, insn);
-
- /* Now add the cost for each operand to the total costs for
- its register. */
-
- for (i = 0; i < noperands; i++)
- if (GET_CODE (recog_operand[i]) == REG
- && REGNO (recog_operand[i]) >= FIRST_PSEUDO_REGISTER)
- {
- int regno = REGNO (recog_operand[i]);
- struct costs *p = &costs[regno], *q = &op_costs[i];
-
- p->mem_cost += q->mem_cost * loop_cost;
- for (j = 0; j < N_REG_CLASSES; j++)
- p->cost[j] += q->cost[j] * loop_cost;
- }
- }
+ insn = scan_one_insn (insn, pass);
}
-
+
/* Now for each register look at how desirable each class is
and find which class is preferred. Store that in
`prefclass[REGNO]'. Record in `altclass[REGNO]' the largest register
if (pass == 0)
{
- prefclass = (char *) oballoc (nregs);
- altclass = (char *) oballoc (nregs);
+ prefclass = prefclass_buffer;
+ altclass = altclass_buffer;
}
for (i = FIRST_PSEUDO_REGISTER; i < nregs; i++)
}
}
#endif /* REGISTER_CONSTRAINTS */
+
+ free (costs);
}
\f
#ifdef REGISTER_CONSTRAINTS
int n_ops;
rtx *ops;
enum machine_mode *modes;
- char **constraints;
+ const char **constraints;
rtx insn;
{
int alt;
- enum op_type {OP_READ, OP_WRITE, OP_READ_WRITE} op_types[MAX_RECOG_OPERANDS];
int i, j;
rtx set;
- /* By default, each operand is an input operand. */
-
- for (i = 0; i < n_ops; i++)
- op_types[i] = OP_READ;
-
/* Process each alternative, each time minimizing an operand's cost with
the cost for each operand in that alternative. */
for (i = 0; i < n_ops; i++)
{
- char *p = constraints[i];
+ const char *p = constraints[i];
rtx op = ops[i];
enum machine_mode mode = modes[i];
+ int allows_addr = 0;
int allows_mem = 0;
int win = 0;
- char c;
+ unsigned char c;
+
+ /* Initially show we know nothing about the register class. */
+ classes[i] = NO_REGS;
/* If this operand has no constraints at all, we can conclude
nothing about it since anything is valid. */
continue;
}
- if (*p == '%')
- p++;
-
/* If this alternative is only relevant when this operand
matches a previous operand, we do different things depending
- on whether this operand is a pseudo-reg or not. */
+ on whether this operand is a pseudo-reg or not. We must process
+ any modifiers for the operand before we can make this test. */
+
+ while (*p == '%' || *p == '=' || *p == '+' || *p == '&')
+ p++;
if (p[0] >= '0' && p[0] <= '0' + i && (p[1] == ',' || p[1] == 0))
{
any of the constraints. Collect the valid register classes
and see if this operand accepts memory. */
- classes[i] = NO_REGS;
while (*p && (c = *p++) != ',')
switch (c)
{
- case '=':
- op_types[i] = OP_WRITE;
- break;
-
- case '+':
- op_types[i] = OP_READ_WRITE;
- break;
-
case '*':
/* Ignore the next letter for this pass. */
p++;
break;
- case '%':
- case '?': case '!': case '#':
- case '&':
+ case '?':
+ alt_cost += 2;
+ case '!': case '#': case '&':
case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ break;
+
case 'p':
+ allows_addr = 1;
+ win = address_operand (op, GET_MODE (op));
break;
case 'm': case 'o': case 'V':
if (GET_CODE (op) == REG && REGNO (op) >= FIRST_PSEUDO_REGISTER)
{
if (classes[i] == NO_REGS)
- alt_fail = 1;
+ {
+ if (! allows_addr)
+ alt_fail = 1;
+ }
else
{
struct costs *pp = &this_op_costs[i];
a bit cheaper since we won't need an extra insn to
load it. */
- pp->mem_cost = MEMORY_MOVE_COST (mode) - allows_mem;
+ pp->mem_cost = (MEMORY_MOVE_COST (mode, classes[i], 1)
+ - allows_mem);
/* If we have assigned a class to this register in our
first pass, add a cost to this alternative corresponding
if (prefclass)
alt_cost
- += may_move_cost[prefclass[REGNO (op)]][(int) classes[i]];
+ += may_move_cost[(unsigned char)prefclass[REGNO (op)]][(int) classes[i]];
}
}
else if (classes[i] != NO_REGS)
{
- if (op_types[i] != OP_WRITE)
+ if (recog_op_type[i] != OP_OUT)
alt_cost += copy_cost (op, mode, classes[i], 1);
- if (op_types[i] != OP_READ)
+ if (recog_op_type[i] != OP_IN)
alt_cost += copy_cost (op, mode, classes[i], 0);
}
/* The only other way this alternative can be used is if this is a
constant that could be placed into memory. */
- else if (CONSTANT_P (op) && allows_mem)
- alt_cost += MEMORY_MOVE_COST (mode);
+ else if (CONSTANT_P (op) && (allows_addr || allows_mem))
+ alt_cost += MEMORY_MOVE_COST (mode, classes[i], 1);
else
alt_fail = 1;
}
&& REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER)
{
struct costs *pp = &op_costs[i], *qq = &this_op_costs[i];
- int scale = 1 + (op_types[i] == OP_READ_WRITE);
+ int scale = 1 + (recog_op_type[i] == OP_INOUT);
pp->mem_cost = MIN (pp->mem_cost,
(qq->mem_cost + alt_cost) * scale);
int nr;
if (regno >= FIRST_PSEUDO_REGISTER && prefclass != 0
- && (reg_class_size[prefclass[regno]]
+ && (reg_class_size[(unsigned char)prefclass[regno]]
== CLASS_MAX_NREGS (prefclass[regno], mode)))
- op_costs[i].cost[prefclass[regno]] = -1;
+ op_costs[i].cost[(unsigned char)prefclass[regno]] = -1;
else if (regno < FIRST_PSEUDO_REGISTER)
for (class = 0; class < N_REG_CLASSES; class++)
if (TEST_HARD_REG_BIT (reg_class_contents[class], regno)
else (constants). */
if (GET_CODE (x) == MEM || class == NO_REGS)
- return MEMORY_MOVE_COST (mode);
+ return MEMORY_MOVE_COST (mode, class, to_p);
else if (GET_CODE (x) == REG)
return move_cost[(int) REGNO_REG_CLASS (REGNO (x))][(int) class];
register struct costs *pp = &costs[REGNO (x)];
register int i;
- pp->mem_cost += (MEMORY_MOVE_COST (Pmode) * scale) / 2;
+ pp->mem_cost += (MEMORY_MOVE_COST (Pmode, class, 1) * scale) / 2;
for (i = 0; i < N_REG_CLASSES; i++)
pp->cost[i] += (may_move_cost[i][(int) class] * scale) / 2;
rtx reg;
enum machine_mode mode;
{
-#ifdef HAVE_POST_INCREMENT
- if (memory_address_p (mode, gen_rtx_POST_INC (Pmode, reg)))
+ if (HAVE_POST_INCREMENT
+ && memory_address_p (mode, gen_rtx_POST_INC (Pmode, reg)))
return 1;
-#endif
-#ifdef HAVE_POST_DECREMENT
- if (memory_address_p (mode, gen_rtx_POST_DEC (Pmode, reg)))
+ if (HAVE_POST_DECREMENT
+ && memory_address_p (mode, gen_rtx_POST_DEC (Pmode, reg)))
return 1;
-#endif
-#ifdef HAVE_PRE_INCREMENT
- if (memory_address_p (mode, gen_rtx_PRE_INC (Pmode, reg)))
+ if (HAVE_PRE_INCREMENT
+ && memory_address_p (mode, gen_rtx_PRE_INC (Pmode, reg)))
return 1;
-#endif
-#ifdef HAVE_PRE_DECREMENT
- if (memory_address_p (mode, gen_rtx_PRE_DEC (Pmode, reg)))
+ if (HAVE_PRE_DECREMENT
+ && memory_address_p (mode, gen_rtx_PRE_DEC (Pmode, reg)))
return 1;
-#endif
return 0;
}
#endif /* REGISTER_CONSTRAINTS */
\f
+static short *renumber = (short *)0;
+static size_t regno_allocated = 0;
+
/* Allocate enough space to hold NUM_REGS registers for the tables used for
reg_scan and flow_analysis that are indexed by the register number. If
NEW_P is non zero, initialize all of the registers, otherwise only
void
allocate_reg_info (num_regs, new_p, renumber_p)
- int num_regs;
+ size_t num_regs;
int new_p;
int renumber_p;
{
- static int regno_allocated = 0;
- static int regno_max = 0;
- static short *renumber = (short *)0;
- int i;
- int size_info;
- int size_renumber;
- int min = (new_p) ? 0 : regno_max;
-
- /* If this message come up, and you want to fix it, then all of the tables
- like reg_renumber, etc. that use short will have to be found and lengthed
- to int or HOST_WIDE_INT. */
-
- /* Free up all storage allocated */
- if (num_regs < 0)
- {
- if (reg_n_info)
- {
- free ((char *)reg_n_info);
- free ((char *)renumber);
- reg_n_info = (reg_info *)0;
- renumber = (short *)0;
- }
- regno_allocated = 0;
- regno_max = 0;
- return;
- }
+ size_t size_info;
+ size_t size_renumber;
+ size_t min = (new_p) ? 0 : reg_n_max;
+ struct reg_info_data *reg_data;
+ struct reg_info_data *reg_next;
if (num_regs > regno_allocated)
{
+ size_t old_allocated = regno_allocated;
+
regno_allocated = num_regs + (num_regs / 20); /* add some slop space */
- size_info = regno_allocated * sizeof (reg_info);
size_renumber = regno_allocated * sizeof (short);
if (!reg_n_info)
{
- reg_n_info = (reg_info *) xmalloc (size_info);
- renumber = (short *) xmalloc (size_renumber);
- }
-
- else if (new_p) /* if we're zapping everything, no need to realloc */
- {
- free ((char *)reg_n_info);
- free ((char *)renumber);
- reg_n_info = (reg_info *) xmalloc (size_info);
+ VARRAY_REG_INIT (reg_n_info, regno_allocated, "reg_n_info");
renumber = (short *) xmalloc (size_renumber);
+ prefclass_buffer = (char *) xmalloc (regno_allocated);
+ altclass_buffer = (char *) xmalloc (regno_allocated);
}
else
{
- reg_n_info = (reg_info *) xrealloc ((char *)reg_n_info, size_info);
- renumber = (short *) xrealloc ((char *)renumber, size_renumber);
+ VARRAY_GROW (reg_n_info, regno_allocated);
+
+ if (new_p) /* if we're zapping everything, no need to realloc */
+ {
+ free ((char *)renumber);
+ free ((char *)prefclass_buffer);
+ free ((char *)altclass_buffer);
+ renumber = (short *) xmalloc (size_renumber);
+ prefclass_buffer = (char *) xmalloc (regno_allocated);
+ altclass_buffer = (char *) xmalloc (regno_allocated);
+ }
+
+ else
+ {
+ renumber = (short *) xrealloc ((char *)renumber, size_renumber);
+ prefclass_buffer = (char *) xrealloc ((char *)prefclass_buffer,
+ regno_allocated);
+
+ altclass_buffer = (char *) xrealloc ((char *)altclass_buffer,
+ regno_allocated);
+ }
}
+
+ size_info = (regno_allocated - old_allocated) * sizeof (reg_info)
+ + sizeof (struct reg_info_data) - sizeof (reg_info);
+ reg_data = (struct reg_info_data *) xcalloc (size_info, 1);
+ reg_data->min_index = old_allocated;
+ reg_data->max_index = regno_allocated - 1;
+ reg_data->next = reg_info_head;
+ reg_info_head = reg_data;
}
+ reg_n_max = num_regs;
if (min < num_regs)
{
- bzero ((char *) ®_n_info[min], (num_regs - min) * sizeof (reg_info));
- for (i = min; i < num_regs; i++)
+ /* Loop through each of the segments allocated for the actual
+ reg_info pages, and set up the pointers, zero the pages, etc. */
+ for (reg_data = reg_info_head; reg_data; reg_data = reg_next)
{
- REG_BASIC_BLOCK (i) = REG_BLOCK_UNKNOWN;
- renumber[i] = -1;
+ size_t min_index = reg_data->min_index;
+ size_t max_index = reg_data->max_index;
+
+ reg_next = reg_data->next;
+ if (min <= max_index)
+ {
+ size_t max = max_index;
+ size_t local_min = min - min_index;
+ size_t i;
+
+ if (min < min_index)
+ local_min = 0;
+ if (!reg_data->used_p) /* page just allocated with calloc */
+ reg_data->used_p = 1; /* no need to zero */
+ else
+ bzero ((char *) ®_data->data[local_min],
+ sizeof (reg_info) * (max - min_index - local_min + 1));
+
+ for (i = min_index+local_min; i <= max; i++)
+ {
+ VARRAY_REG (reg_n_info, i) = ®_data->data[i-min_index];
+ REG_BASIC_BLOCK (i) = REG_BLOCK_UNKNOWN;
+ renumber[i] = -1;
+ prefclass_buffer[i] = (char) NO_REGS;
+ altclass_buffer[i] = (char) NO_REGS;
+ }
+ }
}
}
+ /* If {pref,alt}class have already been allocated, update the pointers to
+ the newly realloced ones. */
+ if (prefclass)
+ {
+ prefclass = prefclass_buffer;
+ altclass = altclass_buffer;
+ }
+
if (renumber_p)
reg_renumber = renumber;
/* Tell the regset code about the new number of registers */
MAX_REGNO_REG_SET (num_regs, new_p, renumber_p);
-
- regno_max = num_regs;
}
+/* Free up the space allocated by allocate_reg_info. */
+void
+free_reg_info ()
+{
+ if (reg_n_info)
+ {
+ struct reg_info_data *reg_data;
+ struct reg_info_data *reg_next;
+
+ VARRAY_FREE (reg_n_info);
+ for (reg_data = reg_info_head; reg_data; reg_data = reg_next)
+ {
+ reg_next = reg_data->next;
+ free ((char *)reg_data);
+ }
+
+ free (prefclass_buffer);
+ free (altclass_buffer);
+ prefclass_buffer = (char *)0;
+ altclass_buffer = (char *)0;
+ reg_info_head = (struct reg_info_data *)0;
+ renumber = (short *)0;
+ }
+ regno_allocated = 0;
+ reg_n_max = 0;
+}
\f
/* This is the `regscan' pass of the compiler, run just before cse
and again just before loop.
if (GET_CODE (PATTERN (insn)) == PARALLEL
&& XVECLEN (PATTERN (insn), 0) > max_parallel)
max_parallel = XVECLEN (PATTERN (insn), 0);
- reg_scan_mark_refs (PATTERN (insn), insn, 0);
+ reg_scan_mark_refs (PATTERN (insn), insn, 0, 0);
if (REG_NOTES (insn))
- reg_scan_mark_refs (REG_NOTES (insn), insn, 1);
+ reg_scan_mark_refs (REG_NOTES (insn), insn, 1, 0);
+ }
+}
+
+/* Update 'regscan' information by looking at the insns
+ from FIRST to LAST. Some new REGs have been created,
+ and any REG with number greater than OLD_MAX_REGNO is
+ such a REG. We only update information for those. */
+
+void
+reg_scan_update(first, last, old_max_regno)
+ rtx first;
+ rtx last;
+ int old_max_regno;
+{
+ register rtx insn;
+
+ allocate_reg_info (max_reg_num (), FALSE, FALSE);
+
+ for (insn = first; insn != last; insn = NEXT_INSN (insn))
+ if (GET_CODE (insn) == INSN
+ || GET_CODE (insn) == CALL_INSN
+ || GET_CODE (insn) == JUMP_INSN)
+ {
+ if (GET_CODE (PATTERN (insn)) == PARALLEL
+ && XVECLEN (PATTERN (insn), 0) > max_parallel)
+ max_parallel = XVECLEN (PATTERN (insn), 0);
+ reg_scan_mark_refs (PATTERN (insn), insn, 0, old_max_regno);
+
+ if (REG_NOTES (insn))
+ reg_scan_mark_refs (REG_NOTES (insn), insn, 1, old_max_regno);
}
}
/* X is the expression to scan. INSN is the insn it appears in.
- NOTE_FLAG is nonzero if X is from INSN's notes rather than its body. */
+ NOTE_FLAG is nonzero if X is from INSN's notes rather than its body.
+ We should only record information for REGs with numbers
+ greater than or equal to MIN_REGNO. */
static void
-reg_scan_mark_refs (x, insn, note_flag)
+reg_scan_mark_refs (x, insn, note_flag, min_regno)
rtx x;
rtx insn;
int note_flag;
+ int min_regno;
{
- register enum rtx_code code = GET_CODE (x);
+ register enum rtx_code code;
register rtx dest;
register rtx note;
+ code = GET_CODE (x);
switch (code)
{
- case CONST_INT:
case CONST:
+ case CONST_INT:
case CONST_DOUBLE:
case CC0:
case PC:
{
register int regno = REGNO (x);
- REGNO_LAST_NOTE_UID (regno) = INSN_UID (insn);
- if (!note_flag)
- REGNO_LAST_UID (regno) = INSN_UID (insn);
- if (REGNO_FIRST_UID (regno) == 0)
- REGNO_FIRST_UID (regno) = INSN_UID (insn);
+ if (regno >= min_regno)
+ {
+ REGNO_LAST_NOTE_UID (regno) = INSN_UID (insn);
+ if (!note_flag)
+ REGNO_LAST_UID (regno) = INSN_UID (insn);
+ if (REGNO_FIRST_UID (regno) == 0)
+ REGNO_FIRST_UID (regno) = INSN_UID (insn);
+ }
}
break;
case EXPR_LIST:
if (XEXP (x, 0))
- reg_scan_mark_refs (XEXP (x, 0), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, 0), insn, note_flag, min_regno);
if (XEXP (x, 1))
- reg_scan_mark_refs (XEXP (x, 1), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno);
break;
case INSN_LIST:
if (XEXP (x, 1))
- reg_scan_mark_refs (XEXP (x, 1), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno);
break;
case SET:
dest = XEXP (dest, 0))
;
- if (GET_CODE (dest) == REG)
+ if (GET_CODE (dest) == REG
+ && REGNO (dest) >= min_regno)
REG_N_SETS (REGNO (dest))++;
/* If this is setting a pseudo from another pseudo or the sum of a
if (GET_CODE (SET_DEST (x)) == REG
&& REGNO (SET_DEST (x)) >= FIRST_PSEUDO_REGISTER
+ && REGNO (SET_DEST (x)) >= min_regno
+ /* If the destination pseudo is set more than once, then other
+ sets might not be to a pointer value (consider access to a
+ union in two threads of control in the presense of global
+ optimizations). So only set REGNO_POINTER_FLAG on the destination
+ pseudo if this is the only set of that pseudo. */
+ && REG_N_SETS (REGNO (SET_DEST (x))) == 1
&& ! REG_USERVAR_P (SET_DEST (x))
&& ! REGNO_POINTER_FLAG (REGNO (SET_DEST (x)))
&& ((GET_CODE (SET_SRC (x)) == REG
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
if (fmt[i] == 'e')
- reg_scan_mark_refs (XEXP (x, i), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, i), insn, note_flag, min_regno);
else if (fmt[i] == 'E' && XVEC (x, i) != 0)
{
register int j;
for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- reg_scan_mark_refs (XVECEXP (x, i, j), insn, note_flag);
+ reg_scan_mark_refs (XVECEXP (x, i, j), insn, note_flag, min_regno);
}
}
}
OSDN Git Service
