/* Compute register class preferences for pseudo-registers.
- Copyright (C) 1987, 88, 91-97, 1998 Free Software Foundation, Inc.
+ Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996
+ 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
This file is part of GNU CC.
#include "config.h"
#include "system.h"
#include "rtl.h"
+#include "tm_p.h"
#include "hard-reg-set.h"
#include "flags.h"
#include "basic-block.h"
#include "regs.h"
+#include "function.h"
#include "insn-config.h"
#include "recog.h"
#include "reload.h"
#include "real.h"
#include "toplev.h"
#include "output.h"
+#include "ggc.h"
#ifndef REGISTER_MOVE_COST
-#define REGISTER_MOVE_COST(x, y) 2
+#define REGISTER_MOVE_COST(m, x, y) 2
#endif
+static void init_reg_sets_1 PARAMS ((void));
+static void init_reg_modes PARAMS ((void));
+
/* If we have auto-increment or auto-decrement and we can have secondary
reloads, we are not allowed to use classes requiring secondary
reloads for pseudos auto-incremented since reload can't handle it. */
/* Indexed by hard register number, contains 1 for registers
that are fixed use (stack pointer, pc, frame pointer, etc.).
These are the registers that cannot be used to allocate
- a pseudo reg whose life does not cross calls. */
+ a pseudo reg for general use. */
char fixed_regs[FIRST_PSEUDO_REGISTER];
/* Indexed by hard register number, contains 1 for registers
that are fixed use or are clobbered by function calls.
These are the registers that cannot be used to allocate
- a pseudo reg whose life crosses calls. */
+ a pseudo reg whose life crosses calls unless we are able
+ to save/restore them across the calls. */
char call_used_regs[FIRST_PSEUDO_REGISTER];
static char initial_call_used_regs[] = CALL_USED_REGISTERS;
/* Indexed by hard register number, contains 1 for registers that are
- fixed use -- i.e. in fixed_regs -- or a function value return register
- or STRUCT_VALUE_REGNUM or STATIC_CHAIN_REGNUM. These are the
- registers that cannot hold quantities across calls even if we are
- willing to save and restore them. */
+ fixed use or call used registers that cannot hold quantities across
+ calls even if we are willing to save and restore them. call fixed
+ registers are a subset of call used registers. */
char call_fixed_regs[FIRST_PSEUDO_REGISTER];
/* Table of register numbers in the order in which to try to use them. */
#ifdef REG_ALLOC_ORDER
int reg_alloc_order[FIRST_PSEUDO_REGISTER] = REG_ALLOC_ORDER;
+
+/* The inverse of reg_alloc_order. */
+int inv_reg_alloc_order[FIRST_PSEUDO_REGISTER];
#endif
/* For each reg class, a HARD_REG_SET saying which registers are in it. */
/* For each reg class, number of regs it contains. */
-int reg_class_size[N_REG_CLASSES];
+unsigned int reg_class_size[N_REG_CLASSES];
/* For each reg class, table listing all the containing classes. */
enum reg_class reg_class_superunion[N_REG_CLASSES][N_REG_CLASSES];
-/* Array containing all of the register names */
+/* Array containing all of the register names. Unless
+ DEBUG_REGISTER_NAMES is defined, use the copy in print-rtl.c. */
-char *reg_names[] = REGISTER_NAMES;
+#ifdef DEBUG_REGISTER_NAMES
+const char * reg_names[] = REGISTER_NAMES;
+#endif
/* For each hard register, the widest mode object that it can contain.
This will be a MODE_INT mode if the register can hold integers. Otherwise
/* Maximum cost of moving from a register in one class to a register in
another class. Based on REGISTER_MOVE_COST. */
-static int move_cost[N_REG_CLASSES][N_REG_CLASSES];
+static int move_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES];
/* Similar, but here we don't have to move if the first index is a subset
of the second so in that case the cost is zero. */
-static int may_move_cost[N_REG_CLASSES][N_REG_CLASSES];
+static int may_move_in_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES];
+
+/* Similar, but here we don't have to move if the first index is a superset
+ of the second so in that case the cost is zero. */
+
+static int may_move_out_cost[MAX_MACHINE_MODE][N_REG_CLASSES][N_REG_CLASSES];
#ifdef FORBIDDEN_INC_DEC_CLASSES
#endif /* FORBIDDEN_INC_DEC_CLASSES */
+#ifdef CLASS_CANNOT_CHANGE_MODE
+
+/* These are the classes containing only registers that can be used in
+ a SUBREG expression that changes the mode of the register in some
+ way that is illegal. */
+
+static int class_can_change_mode[N_REG_CLASSES];
+
+/* Registers, including pseudos, which change modes in some way that
+ is illegal. */
+
+static regset reg_changes_mode;
+
+#endif /* CLASS_CANNOT_CHANGE_MODE */
+
#ifdef HAVE_SECONDARY_RELOADS
/* Sample MEM values for use by memory_move_secondary_cost. */
static struct reg_info_data *reg_info_head;
+/* No more global register variables may be declared; true once
+ regclass has been initialized. */
+
+static int no_global_reg_vars = 0;
+
/* Function called only once to initialize the above data on reg usage.
Once this is done, various switches may override. */
SET_HARD_REG_BIT (reg_class_contents[i], j);
}
- bcopy (initial_fixed_regs, fixed_regs, sizeof fixed_regs);
- bcopy (initial_call_used_regs, call_used_regs, sizeof call_used_regs);
- bzero (global_regs, sizeof global_regs);
+ memcpy (fixed_regs, initial_fixed_regs, sizeof fixed_regs);
+ memcpy (call_used_regs, initial_call_used_regs, sizeof call_used_regs);
+ memset (global_regs, 0, sizeof global_regs);
+
+ /* Do any additional initialization regsets may need */
+ INIT_ONCE_REG_SET ();
+
+#ifdef REG_ALLOC_ORDER
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ inv_reg_alloc_order[reg_alloc_order[i]] = i;
+#endif
+}
+
+/* After switches have been processed, which perhaps alter
+ `fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */
+
+static void
+init_reg_sets_1 ()
+{
+ register unsigned int i, j;
+ register unsigned int /* enum machine_mode */ m;
+ char contains_reg_of_mode [N_REG_CLASSES] [MAX_MACHINE_MODE];
+ char allocatable_regs_of_mode [MAX_MACHINE_MODE];
+
+ /* This macro allows the fixed or call-used registers
+ and the register classes to depend on target flags. */
+
+#ifdef CONDITIONAL_REGISTER_USAGE
+ CONDITIONAL_REGISTER_USAGE;
+#endif
/* Compute number of hard regs in each class. */
- bzero ((char *) reg_class_size, sizeof reg_class_size);
+ memset ((char *) reg_class_size, 0, sizeof reg_class_size);
for (i = 0; i < N_REG_CLASSES; i++)
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (TEST_HARD_REG_BIT (reg_class_contents[i], j))
}
}
- /* Do any additional initialization regsets may need */
- INIT_ONCE_REG_SET ();
-}
-
-/* After switches have been processed, which perhaps alter
- `fixed_regs' and `call_used_regs', convert them to HARD_REG_SETs. */
-
-static void
-init_reg_sets_1 ()
-{
- register unsigned int i, j;
-
- /* This macro allows the fixed or call-used registers
- to depend on target flags. */
-
-#ifdef CONDITIONAL_REGISTER_USAGE
- CONDITIONAL_REGISTER_USAGE;
-#endif
-
/* Initialize "constant" tables. */
CLEAR_HARD_REG_SET (fixed_reg_set);
CLEAR_HARD_REG_SET (call_used_reg_set);
CLEAR_HARD_REG_SET (call_fixed_reg_set);
- bcopy (fixed_regs, call_fixed_regs, sizeof call_fixed_regs);
+ memcpy (call_fixed_regs, fixed_regs, sizeof call_fixed_regs);
n_non_fixed_regs = 0;
if (CLASS_LIKELY_SPILLED_P (REGNO_REG_CLASS (i)))
SET_HARD_REG_BIT (losing_caller_save_reg_set, i);
}
+ memset (contains_reg_of_mode, 0, sizeof (contains_reg_of_mode));
+ memset (allocatable_regs_of_mode, 0, sizeof (allocatable_regs_of_mode));
+ for (m = 0; m < MAX_MACHINE_MODE; m++)
+ for (i = 0; i < N_REG_CLASSES; i++)
+ for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
+ if (!fixed_regs [j] && TEST_HARD_REG_BIT (reg_class_contents[i], j)
+ && HARD_REGNO_MODE_OK (j, m))
+ {
+ contains_reg_of_mode [i][m] = 1;
+ allocatable_regs_of_mode [m] = 1;
+ break;
+ }
/* Initialize the move cost table. Find every subset of each class
and take the maximum cost of moving any subset to any other. */
- for (i = 0; i < N_REG_CLASSES; i++)
- for (j = 0; j < N_REG_CLASSES; j++)
+ for (m = 0; m < MAX_MACHINE_MODE; m++)
+ if (allocatable_regs_of_mode [m])
{
- int cost = i == j ? 2 : REGISTER_MOVE_COST (i, j);
- enum reg_class *p1, *p2;
-
- for (p2 = ®_class_subclasses[j][0]; *p2 != LIM_REG_CLASSES; p2++)
- if (*p2 != i)
- cost = MAX (cost, REGISTER_MOVE_COST (i, *p2));
-
- for (p1 = ®_class_subclasses[i][0]; *p1 != LIM_REG_CLASSES; p1++)
- {
- if (*p1 != j)
- cost = MAX (cost, REGISTER_MOVE_COST (*p1, j));
-
- for (p2 = ®_class_subclasses[j][0];
- *p2 != LIM_REG_CLASSES; p2++)
- if (*p1 != *p2)
- cost = MAX (cost, REGISTER_MOVE_COST (*p1, *p2));
- }
-
- move_cost[i][j] = cost;
+ for (i = 0; i < N_REG_CLASSES; i++)
+ if (contains_reg_of_mode [i][m])
+ for (j = 0; j < N_REG_CLASSES; j++)
+ {
+ int cost;
+ enum reg_class *p1, *p2;
- if (reg_class_subset_p (i, j))
- cost = 0;
+ if (!contains_reg_of_mode [j][m])
+ {
+ move_cost[m][i][j] = 65536;
+ may_move_in_cost[m][i][j] = 65536;
+ may_move_out_cost[m][i][j] = 65536;
+ }
+ else
+ {
+ cost = i == j ? 2 : REGISTER_MOVE_COST (m, i, j);
+
+ for (p2 = ®_class_subclasses[j][0];
+ *p2 != LIM_REG_CLASSES;
+ p2++)
+ if (*p2 != i && contains_reg_of_mode [*p2][m])
+ cost = MAX (cost, move_cost [m][i][*p2]);
+
+ for (p1 = ®_class_subclasses[i][0];
+ *p1 != LIM_REG_CLASSES;
+ p1++)
+ if (*p1 != j && contains_reg_of_mode [*p1][m])
+ cost = MAX (cost, move_cost [m][*p1][j]);
+
+ move_cost[m][i][j] = cost;
+
+ if (reg_class_subset_p (i, j))
+ may_move_in_cost[m][i][j] = 0;
+ else
+ may_move_in_cost[m][i][j] = cost;
+
+ if (reg_class_subset_p (j, i))
+ may_move_out_cost[m][i][j] = 0;
+ else
+ may_move_out_cost[m][i][j] = cost;
+ }
+ }
+ else
+ for (j = 0; j < N_REG_CLASSES; j++)
+ {
+ move_cost[m][i][j] = 65536;
+ may_move_in_cost[m][i][j] = 65536;
+ may_move_out_cost[m][i][j] = 65536;
+ }
+ }
- may_move_cost[i][j] = cost;
+#ifdef CLASS_CANNOT_CHANGE_MODE
+ {
+ HARD_REG_SET c;
+ COMPL_HARD_REG_SET (c, reg_class_contents[CLASS_CANNOT_CHANGE_MODE]);
+
+ for (i = 0; i < N_REG_CLASSES; i++)
+ {
+ GO_IF_HARD_REG_SUBSET (reg_class_contents[i], c, ok_class);
+ class_can_change_mode [i] = 0;
+ continue;
+ ok_class:
+ class_can_change_mode [i] = 1;
}
+ }
+#endif /* CLASS_CANNOT_CHANGE_MODE */
}
/* Compute the table of register modes.
/* Make some fake stack-frame MEM references for use in
memory_move_secondary_cost. */
int i;
+
for (i = 0; i < MAX_MACHINE_MODE; i++)
top_of_stack[i] = gen_rtx_MEM (i, stack_pointer_rtx);
+ ggc_add_rtx_root (top_of_stack, MAX_MACHINE_MODE);
}
#endif
}
enum reg_class altclass;
int partial_cost = 0;
/* We need a memory reference to feed to SECONDARY... macros. */
- rtx mem = top_of_stack[(int) mode];
+ /* mem may be unused even if the SECONDARY_ macros are defined. */
+ rtx mem ATTRIBUTE_UNUSED = top_of_stack[(int) mode];
+
if (in)
{
return 0;
if (in)
- partial_cost = REGISTER_MOVE_COST (altclass, class);
+ partial_cost = REGISTER_MOVE_COST (mode, altclass, class);
else
- partial_cost = REGISTER_MOVE_COST (class, altclass);
+ partial_cost = REGISTER_MOVE_COST (mode, class, altclass);
if (class == altclass)
/* This isn't simply a copy-to-temporary situation. Can't guess
enum machine_mode
choose_hard_reg_mode (regno, nregs)
- int regno;
- int nregs;
+ unsigned int regno ATTRIBUTE_UNUSED;
+ unsigned int nregs;
{
enum machine_mode found_mode = VOIDmode, mode;
if (found_mode != VOIDmode)
return found_mode;
- if (HARD_REGNO_NREGS (regno, CCmode) == nregs
- && HARD_REGNO_MODE_OK (regno, CCmode))
- return CCmode;
+ /* Iterate over all of the CCmodes. */
+ for (mode = CCmode; mode < NUM_MACHINE_MODES; ++mode)
+ if (HARD_REGNO_NREGS (regno, mode) == nregs
+ && HARD_REGNO_MODE_OK (regno, mode))
+ return mode;
/* We can't find a mode valid for this register. */
return VOIDmode;
void
fix_register (name, fixed, call_used)
- char *name;
+ const char *name;
int fixed, call_used;
{
int i;
if ((i = decode_reg_name (name)) >= 0)
{
- fixed_regs[i] = fixed;
- call_used_regs[i] = call_used;
+ if ((i == STACK_POINTER_REGNUM
+#ifdef HARD_FRAME_POINTER_REGNUM
+ || i == HARD_FRAME_POINTER_REGNUM
+#else
+ || i == FRAME_POINTER_REGNUM
+#endif
+ )
+ && (fixed == 0 || call_used == 0))
+ {
+ static const char * const what_option[2][2] = {
+ { "call-saved", "call-used" },
+ { "no-such-option", "fixed" }};
+
+ error ("can't use '%s' as a %s register", name,
+ what_option[fixed][call_used]);
+ }
+ else
+ {
+ fixed_regs[i] = fixed;
+ call_used_regs[i] = call_used;
+ }
}
else
{
globalize_reg (i)
int i;
{
+ if (fixed_regs[i] == 0 && no_global_reg_vars)
+ error ("global register variable follows a function definition");
+
if (global_regs[i])
{
warning ("register used for two global register variables");
int mem_cost;
};
-/* Record the cost of each class for each pseudo. */
-
-static struct costs *costs;
+/* Structure used to record preferrences of given pseudo. */
+struct reg_pref
+{
+ /* (enum reg_class) prefclass is the preferred class. */
+ char prefclass;
-/* Record the same data by operand number, accumulated for each alternative
- in an insn. The contribution to a pseudo is that of the minimum-cost
- alternative. */
+ /* altclass is a register class that we should use for allocating
+ pseudo if no register in the preferred class is available.
+ If no register in this class is available, memory is preferred.
-static struct costs op_costs[MAX_RECOG_OPERANDS];
+ It might appear to be more general to have a bitmask of classes here,
+ but since it is recommended that there be a class corresponding to the
+ union of most major pair of classes, that generality is not required. */
+ char altclass;
+};
-/* (enum reg_class) prefclass[R] is the preferred class for pseudo number R.
- This is available after `regclass' is run. */
+/* Record the cost of each class for each pseudo. */
-static char *prefclass;
+static struct costs *costs;
-/* altclass[R] is a register class that we should use for allocating
- pseudo number R if no register in the preferred class is available.
- If no register in this class is available, memory is preferred.
+/* Initialized once, and used to initialize cost values for each insn. */
- It might appear to be more general to have a bitmask of classes here,
- but since it is recommended that there be a class corresponding to the
- union of most major pair of classes, that generality is not required.
+static struct costs init_cost;
+/* Record preferrences of each pseudo.
This is available after `regclass' is run. */
-static char *altclass;
-
-/* Allocated buffers for prefclass and altclass. */
-static char *prefclass_buffer;
-static char *altclass_buffer;
+static struct reg_pref *reg_pref;
-/* Record the depth of loops that we are in. */
+/* Allocated buffers for reg_pref. */
-static int loop_depth;
+static struct reg_pref *reg_pref_buffer;
/* Account for the fact that insns within a loop are executed very commonly,
but don't keep doing this as loops go too deep. */
static int loop_cost;
-static void record_reg_classes PROTO((int, int, rtx *, enum machine_mode *,
- char **, rtx));
-static int copy_cost PROTO((rtx, enum machine_mode,
+static rtx scan_one_insn PARAMS ((rtx, int));
+static void record_operand_costs PARAMS ((rtx, struct costs *, struct reg_pref *));
+static void dump_regclass PARAMS ((FILE *));
+static void record_reg_classes PARAMS ((int, int, rtx *, enum machine_mode *,
+ const char **, rtx,
+ struct costs *, struct reg_pref *));
+static int copy_cost PARAMS ((rtx, enum machine_mode,
enum reg_class, int));
-static void record_address_regs PROTO((rtx, enum reg_class, int));
+static void record_address_regs PARAMS ((rtx, enum reg_class, int));
#ifdef FORBIDDEN_INC_DEC_CLASSES
-static int auto_inc_dec_reg_p PROTO((rtx, enum machine_mode));
+static int auto_inc_dec_reg_p PARAMS ((rtx, enum machine_mode));
#endif
-static void reg_scan_mark_refs PROTO((rtx, rtx, int));
+static void reg_scan_mark_refs PARAMS ((rtx, rtx, int, unsigned int));
/* Return the reg_class in which pseudo reg number REGNO is best allocated.
This function is sometimes called before the info has been computed.
reg_preferred_class (regno)
int regno;
{
- if (prefclass == 0)
+ if (reg_pref == 0)
return GENERAL_REGS;
- return (enum reg_class) prefclass[regno];
+ return (enum reg_class) reg_pref[regno].prefclass;
}
enum reg_class
reg_alternate_class (regno)
int regno;
{
- if (prefclass == 0)
+ if (reg_pref == 0)
return ALL_REGS;
- return (enum reg_class) altclass[regno];
+ return (enum reg_class) reg_pref[regno].altclass;
}
-/* This prevents dump_flow_info from losing if called
- before regclass is run. */
+/* Initialize some global data for this pass. */
void
regclass_init ()
{
- prefclass = 0;
+ int i;
+
+ init_cost.mem_cost = 10000;
+ for (i = 0; i < N_REG_CLASSES; i++)
+ init_cost.cost[i] = 10000;
+
+ /* This prevents dump_flow_info from losing if called
+ before regclass is run. */
+ reg_pref = NULL;
+
+ /* No more global register variables may be declared. */
+ no_global_reg_vars = 1;
+}
+\f
+/* Dump register costs. */
+static void
+dump_regclass (dump)
+ FILE *dump;
+{
+ static const char *const reg_class_names[] = REG_CLASS_NAMES;
+ int i;
+ for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
+ {
+ enum reg_class class;
+ if (REG_N_REFS (i))
+ {
+ fprintf (dump, " Register %i costs:", i);
+ for (class = 0; class < N_REG_CLASSES; class++)
+ fprintf (dump, " %s:%i", reg_class_names[(int) class],
+ costs[i].cost[class]);
+ fprintf (dump, " MEM:%i\n", costs[i].mem_cost);
+ }
+ }
}
\f
+
+/* Calculate the costs of insn operands. */
+
+static void
+record_operand_costs (insn, op_costs, reg_pref)
+ rtx insn;
+ struct costs *op_costs;
+ struct reg_pref *reg_pref;
+{
+ const char *constraints[MAX_RECOG_OPERANDS];
+ enum machine_mode modes[MAX_RECOG_OPERANDS];
+ int i;
+
+ for (i = 0; i < recog_data.n_operands; i++)
+ {
+ constraints[i] = recog_data.constraints[i];
+ modes[i] = recog_data.operand_mode[i];
+ }
+
+ /* If we get here, we are set up to record the costs of all the
+ operands for this insn. Start by initializing the costs.
+ Then handle any address registers. Finally record the desired
+ classes for any pseudos, doing it twice if some pair of
+ operands are commutative. */
+
+ for (i = 0; i < recog_data.n_operands; i++)
+ {
+ op_costs[i] = init_cost;
+
+ if (GET_CODE (recog_data.operand[i]) == SUBREG)
+ {
+ rtx inner = SUBREG_REG (recog_data.operand[i]);
+#ifdef CLASS_CANNOT_CHANGE_MODE
+ if (GET_CODE (inner) == REG
+ && CLASS_CANNOT_CHANGE_MODE_P (modes[i], GET_MODE (inner)))
+ SET_REGNO_REG_SET (reg_changes_mode, REGNO (inner));
+#endif
+ recog_data.operand[i] = inner;
+ }
+
+ if (GET_CODE (recog_data.operand[i]) == MEM)
+ record_address_regs (XEXP (recog_data.operand[i], 0),
+ BASE_REG_CLASS, loop_cost * 2);
+ else if (constraints[i][0] == 'p')
+ record_address_regs (recog_data.operand[i],
+ BASE_REG_CLASS, loop_cost * 2);
+ }
+
+ /* Check for commutative in a separate loop so everything will
+ have been initialized. We must do this even if one operand
+ is a constant--see addsi3 in m68k.md. */
+
+ for (i = 0; i < (int) recog_data.n_operands - 1; i++)
+ if (constraints[i][0] == '%')
+ {
+ const char *xconstraints[MAX_RECOG_OPERANDS];
+ int j;
+
+ /* Handle commutative operands by swapping the constraints.
+ We assume the modes are the same. */
+
+ for (j = 0; j < recog_data.n_operands; j++)
+ xconstraints[j] = constraints[j];
+
+ xconstraints[i] = constraints[i+1];
+ xconstraints[i+1] = constraints[i];
+ record_reg_classes (recog_data.n_alternatives, recog_data.n_operands,
+ recog_data.operand, modes,
+ xconstraints, insn, op_costs, reg_pref);
+ }
+
+ record_reg_classes (recog_data.n_alternatives, recog_data.n_operands,
+ recog_data.operand, modes,
+ constraints, insn, op_costs, reg_pref);
+}
+\f
+/* Subroutine of regclass, processes one insn INSN. Scan it and record each
+ time it would save code to put a certain register in a certain class.
+ PASS, when nonzero, inhibits some optimizations which need only be done
+ once.
+ Return the last insn processed, so that the scan can be continued from
+ there. */
+
+static rtx
+scan_one_insn (insn, pass)
+ rtx insn;
+ int pass;
+{
+ enum rtx_code code = GET_CODE (insn);
+ enum rtx_code pat_code;
+ rtx set, note;
+ int i, j;
+ struct costs op_costs[MAX_RECOG_OPERANDS];
+
+ if (GET_RTX_CLASS (code) != 'i')
+ return insn;
+
+ pat_code = GET_CODE (PATTERN (insn));
+ if (pat_code == USE
+ || pat_code == CLOBBER
+ || pat_code == ASM_INPUT
+ || pat_code == ADDR_VEC
+ || pat_code == ADDR_DIFF_VEC)
+ return insn;
+
+ set = single_set (insn);
+ extract_insn (insn);
+
+ /* If this insn loads a parameter from its stack slot, then
+ it represents a savings, rather than a cost, if the
+ parameter is stored in memory. Record this fact. */
+
+ if (set != 0 && GET_CODE (SET_DEST (set)) == REG
+ && GET_CODE (SET_SRC (set)) == MEM
+ && (note = find_reg_note (insn, REG_EQUIV,
+ NULL_RTX)) != 0
+ && GET_CODE (XEXP (note, 0)) == MEM)
+ {
+ costs[REGNO (SET_DEST (set))].mem_cost
+ -= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set)),
+ GENERAL_REGS, 1)
+ * loop_cost);
+ record_address_regs (XEXP (SET_SRC (set), 0),
+ BASE_REG_CLASS, loop_cost * 2);
+ return insn;
+ }
+
+ /* Improve handling of two-address insns such as
+ (set X (ashift CONST Y)) where CONST must be made to
+ match X. Change it into two insns: (set X CONST)
+ (set X (ashift X Y)). If we left this for reloading, it
+ would probably get three insns because X and Y might go
+ in the same place. This prevents X and Y from receiving
+ the same hard reg.
+
+ We can only do this if the modes of operands 0 and 1
+ (which might not be the same) are tieable and we only need
+ do this during our first pass. */
+
+ if (pass == 0 && optimize
+ && recog_data.n_operands >= 3
+ && recog_data.constraints[1][0] == '0'
+ && recog_data.constraints[1][1] == 0
+ && CONSTANT_P (recog_data.operand[1])
+ && ! rtx_equal_p (recog_data.operand[0], recog_data.operand[1])
+ && ! rtx_equal_p (recog_data.operand[0], recog_data.operand[2])
+ && GET_CODE (recog_data.operand[0]) == REG
+ && MODES_TIEABLE_P (GET_MODE (recog_data.operand[0]),
+ recog_data.operand_mode[1]))
+ {
+ rtx previnsn = prev_real_insn (insn);
+ rtx dest
+ = gen_lowpart (recog_data.operand_mode[1],
+ recog_data.operand[0]);
+ rtx newinsn
+ = emit_insn_before (gen_move_insn (dest, recog_data.operand[1]), insn);
+
+ /* If this insn was the start of a basic block,
+ include the new insn in that block.
+ We need not check for code_label here;
+ while a basic block can start with a code_label,
+ INSN could not be at the beginning of that block. */
+ if (previnsn == 0 || GET_CODE (previnsn) == JUMP_INSN)
+ {
+ int b;
+ for (b = 0; b < n_basic_blocks; b++)
+ if (insn == BLOCK_HEAD (b))
+ BLOCK_HEAD (b) = newinsn;
+ }
+
+ /* This makes one more setting of new insns's dest. */
+ REG_N_SETS (REGNO (recog_data.operand[0]))++;
+
+ *recog_data.operand_loc[1] = recog_data.operand[0];
+ for (i = recog_data.n_dups - 1; i >= 0; i--)
+ if (recog_data.dup_num[i] == 1)
+ *recog_data.dup_loc[i] = recog_data.operand[0];
+
+ return PREV_INSN (newinsn);
+ }
+
+ record_operand_costs (insn, op_costs, reg_pref);
+
+ /* Now add the cost for each operand to the total costs for
+ its register. */
+
+ for (i = 0; i < recog_data.n_operands; i++)
+ if (GET_CODE (recog_data.operand[i]) == REG
+ && REGNO (recog_data.operand[i]) >= FIRST_PSEUDO_REGISTER)
+ {
+ int regno = REGNO (recog_data.operand[i]);
+ struct costs *p = &costs[regno], *q = &op_costs[i];
+
+ p->mem_cost += q->mem_cost * loop_cost;
+ for (j = 0; j < N_REG_CLASSES; j++)
+ p->cost[j] += q->cost[j] * loop_cost;
+ }
+
+ return insn;
+}
+
/* This is a pass of the compiler that scans all instructions
and calculates the preferred class for each pseudo-register.
This information can be accessed later by calling `reg_preferred_class'.
This pass comes just before local register allocation. */
void
-regclass (f, nregs)
+regclass (f, nregs, dump)
rtx f;
int nregs;
+ FILE *dump;
{
-#ifdef REGISTER_CONSTRAINTS
register rtx insn;
- register int i, j;
- struct costs init_cost;
- rtx set;
+ register int i;
int pass;
init_recog ();
- costs = (struct costs *) alloca (nregs * sizeof (struct costs));
+ costs = (struct costs *) xmalloc (nregs * sizeof (struct costs));
+
+#ifdef CLASS_CANNOT_CHANGE_MODE
+ reg_changes_mode = BITMAP_XMALLOC();
+#endif
#ifdef FORBIDDEN_INC_DEC_CLASSES
- in_inc_dec = (char *) alloca (nregs);
+ in_inc_dec = (char *) xmalloc (nregs);
/* Initialize information about which register classes can be used for
pseudos that are auto-incremented or auto-decremented. It would
{
rtx r = gen_rtx_REG (VOIDmode, 0);
enum machine_mode m;
+ register int j;
for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
if (TEST_HARD_REG_BIT (reg_class_contents[i], j))
}
#endif /* FORBIDDEN_INC_DEC_CLASSES */
- init_cost.mem_cost = 10000;
- for (i = 0; i < N_REG_CLASSES; i++)
- init_cost.cost[i] = 10000;
-
/* Normally we scan the insns once and determine the best class to use for
each register. However, if -fexpensive_optimizations are on, we do so
twice, the second time using the tentative best classes to guide the
for (pass = 0; pass <= flag_expensive_optimizations; pass++)
{
+ int index;
+
+ if (dump)
+ fprintf (dump, "\n\nPass %i\n\n",pass);
/* Zero out our accumulation of the cost of each class for each reg. */
- bzero ((char *) costs, nregs * sizeof (struct costs));
+ memset ((char *) costs, 0, nregs * sizeof (struct costs));
#ifdef FORBIDDEN_INC_DEC_CLASSES
- bzero (in_inc_dec, nregs);
+ memset (in_inc_dec, 0, nregs);
#endif
- loop_depth = 0, loop_cost = 1;
-
/* Scan the instructions and record each time it would
save code to put a certain register in a certain class. */
- for (insn = f; insn; insn = NEXT_INSN (insn))
+ if (!optimize)
{
- char *constraints[MAX_RECOG_OPERANDS];
- enum machine_mode modes[MAX_RECOG_OPERANDS];
- int nalternatives;
- int noperands;
-
- /* Show that an insn inside a loop is likely to be executed three
- times more than insns outside a loop. This is much more aggressive
- than the assumptions made elsewhere and is being tried as an
- experiment. */
-
- if (GET_CODE (insn) == NOTE
- && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- loop_depth++, loop_cost = 1 << (2 * MIN (loop_depth, 5));
- else if (GET_CODE (insn) == NOTE
- && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- loop_depth--, loop_cost = 1 << (2 * MIN (loop_depth, 5));
-
- else if ((GET_CODE (insn) == INSN
- && GET_CODE (PATTERN (insn)) != USE
- && GET_CODE (PATTERN (insn)) != CLOBBER
- && GET_CODE (PATTERN (insn)) != ASM_INPUT)
- || (GET_CODE (insn) == JUMP_INSN
- && GET_CODE (PATTERN (insn)) != ADDR_VEC
- && GET_CODE (PATTERN (insn)) != ADDR_DIFF_VEC)
- || GET_CODE (insn) == CALL_INSN)
- {
- if (GET_CODE (insn) == INSN
- && (noperands = asm_noperands (PATTERN (insn))) >= 0)
- {
- decode_asm_operands (PATTERN (insn), recog_operand, NULL_PTR,
- constraints, modes);
- nalternatives = (noperands == 0 ? 0
- : n_occurrences (',', constraints[0]) + 1);
- }
- else
- {
- int insn_code_number = recog_memoized (insn);
- rtx note;
-
- set = single_set (insn);
- insn_extract (insn);
-
- nalternatives = insn_n_alternatives[insn_code_number];
- noperands = insn_n_operands[insn_code_number];
-
- /* If this insn loads a parameter from its stack slot, then
- it represents a savings, rather than a cost, if the
- parameter is stored in memory. Record this fact. */
-
- if (set != 0 && GET_CODE (SET_DEST (set)) == REG
- && GET_CODE (SET_SRC (set)) == MEM
- && (note = find_reg_note (insn, REG_EQUIV,
- NULL_RTX)) != 0
- && GET_CODE (XEXP (note, 0)) == MEM)
- {
- costs[REGNO (SET_DEST (set))].mem_cost
- -= (MEMORY_MOVE_COST (GET_MODE (SET_DEST (set)),
- GENERAL_REGS, 1)
- * loop_cost);
- record_address_regs (XEXP (SET_SRC (set), 0),
- BASE_REG_CLASS, loop_cost * 2);
- continue;
- }
-
- /* Improve handling of two-address insns such as
- (set X (ashift CONST Y)) where CONST must be made to
- match X. Change it into two insns: (set X CONST)
- (set X (ashift X Y)). If we left this for reloading, it
- would probably get three insns because X and Y might go
- in the same place. This prevents X and Y from receiving
- the same hard reg.
-
- We can only do this if the modes of operands 0 and 1
- (which might not be the same) are tieable and we only need
- do this during our first pass. */
-
- if (pass == 0 && optimize
- && noperands >= 3
- && insn_operand_constraint[insn_code_number][1][0] == '0'
- && insn_operand_constraint[insn_code_number][1][1] == 0
- && CONSTANT_P (recog_operand[1])
- && ! rtx_equal_p (recog_operand[0], recog_operand[1])
- && ! rtx_equal_p (recog_operand[0], recog_operand[2])
- && GET_CODE (recog_operand[0]) == REG
- && MODES_TIEABLE_P (GET_MODE (recog_operand[0]),
- insn_operand_mode[insn_code_number][1]))
- {
- rtx previnsn = prev_real_insn (insn);
- rtx dest
- = gen_lowpart (insn_operand_mode[insn_code_number][1],
- recog_operand[0]);
- rtx newinsn
- = emit_insn_before (gen_move_insn (dest,
- recog_operand[1]),
- insn);
-
- /* If this insn was the start of a basic block,
- include the new insn in that block.
- We need not check for code_label here;
- while a basic block can start with a code_label,
- INSN could not be at the beginning of that block. */
- if (previnsn == 0 || GET_CODE (previnsn) == JUMP_INSN)
- {
- int b;
- for (b = 0; b < n_basic_blocks; b++)
- if (insn == basic_block_head[b])
- basic_block_head[b] = newinsn;
- }
-
- /* This makes one more setting of new insns's dest. */
- REG_N_SETS (REGNO (recog_operand[0]))++;
-
- *recog_operand_loc[1] = recog_operand[0];
- for (i = insn_n_dups[insn_code_number] - 1; i >= 0; i--)
- if (recog_dup_num[i] == 1)
- *recog_dup_loc[i] = recog_operand[0];
-
- insn = PREV_INSN (newinsn);
- continue;
- }
-
- for (i = 0; i < noperands; i++)
- {
- constraints[i]
- = insn_operand_constraint[insn_code_number][i];
- modes[i] = insn_operand_mode[insn_code_number][i];
- }
- }
-
- /* If we get here, we are set up to record the costs of all the
- operands for this insn. Start by initializing the costs.
- Then handle any address registers. Finally record the desired
- classes for any pseudos, doing it twice if some pair of
- operands are commutative. */
-
- for (i = 0; i < noperands; i++)
- {
- op_costs[i] = init_cost;
-
- if (GET_CODE (recog_operand[i]) == SUBREG)
- recog_operand[i] = SUBREG_REG (recog_operand[i]);
-
- if (GET_CODE (recog_operand[i]) == MEM)
- record_address_regs (XEXP (recog_operand[i], 0),
- BASE_REG_CLASS, loop_cost * 2);
- else if (constraints[i][0] == 'p')
- record_address_regs (recog_operand[i],
- BASE_REG_CLASS, loop_cost * 2);
- }
-
- /* Check for commutative in a separate loop so everything will
- have been initialized. We must do this even if one operand
- is a constant--see addsi3 in m68k.md. */
-
- for (i = 0; i < noperands - 1; i++)
- if (constraints[i][0] == '%')
- {
- char *xconstraints[MAX_RECOG_OPERANDS];
- int j;
-
- /* Handle commutative operands by swapping the constraints.
- We assume the modes are the same. */
-
- for (j = 0; j < noperands; j++)
- xconstraints[j] = constraints[j];
-
- xconstraints[i] = constraints[i+1];
- xconstraints[i+1] = constraints[i];
- record_reg_classes (nalternatives, noperands,
- recog_operand, modes, xconstraints,
- insn);
- }
-
- record_reg_classes (nalternatives, noperands, recog_operand,
- modes, constraints, insn);
-
- /* Now add the cost for each operand to the total costs for
- its register. */
-
- for (i = 0; i < noperands; i++)
- if (GET_CODE (recog_operand[i]) == REG
- && REGNO (recog_operand[i]) >= FIRST_PSEUDO_REGISTER)
- {
- int regno = REGNO (recog_operand[i]);
- struct costs *p = &costs[regno], *q = &op_costs[i];
-
- p->mem_cost += q->mem_cost * loop_cost;
- for (j = 0; j < N_REG_CLASSES; j++)
- p->cost[j] += q->cost[j] * loop_cost;
- }
- }
+ loop_cost = 1;
+ for (insn = f; insn; insn = NEXT_INSN (insn))
+ insn = scan_one_insn (insn, pass);
}
-
+ else
+ for (index = 0; index < n_basic_blocks; index++)
+ {
+ basic_block bb = BASIC_BLOCK (index);
+
+ /* Show that an insn inside a loop is likely to be executed three
+ times more than insns outside a loop. This is much more
+ aggressive than the assumptions made elsewhere and is being
+ tried as an experiment. */
+ if (optimize_size)
+ loop_cost = 1;
+ else
+ loop_cost = 1 << (2 * MIN (bb->loop_depth, 5));
+ for (insn = bb->head; ; insn = NEXT_INSN (insn))
+ {
+ insn = scan_one_insn (insn, pass);
+ if (insn == bb->end)
+ break;
+ }
+ }
+
/* Now for each register look at how desirable each class is
and find which class is preferred. Store that in
- `prefclass[REGNO]'. Record in `altclass[REGNO]' the largest register
+ `prefclass'. Record in `altclass' the largest register
class any of whose registers is better than memory. */
if (pass == 0)
- {
- prefclass = prefclass_buffer;
- altclass = altclass_buffer;
- }
+ reg_pref = reg_pref_buffer;
+ if (dump)
+ {
+ dump_regclass (dump);
+ fprintf (dump,"\n");
+ }
for (i = FIRST_PSEUDO_REGISTER; i < nregs; i++)
{
register int best_cost = (1 << (HOST_BITS_PER_INT - 2)) - 1;
register int class;
register struct costs *p = &costs[i];
+ /* In non-optimizing compilation REG_N_REFS is not initialized
+ yet. */
+ if (optimize && !REG_N_REFS (i))
+ continue;
+
for (class = (int) ALL_REGS - 1; class > 0; class--)
{
/* Ignore classes that are too small for this operand or
#ifdef FORBIDDEN_INC_DEC_CLASSES
|| (in_inc_dec[i] && forbidden_inc_dec_class[class])
#endif
+#ifdef CLASS_CANNOT_CHANGE_MODE
+ || (REGNO_REG_SET_P (reg_changes_mode, i)
+ && ! class_can_change_mode [class])
+#endif
)
;
else if (p->cost[class] < best_cost)
should be provided as a register class. Don't do this if we
will be doing it again later. */
- if (pass == 1 || ! flag_expensive_optimizations)
+ if ((pass == 1 || dump) || ! flag_expensive_optimizations)
for (class = 0; class < N_REG_CLASSES; class++)
if (p->cost[class] < p->mem_cost
&& (reg_class_size[(int) reg_class_subunion[(int) alt][class]]
#ifdef FORBIDDEN_INC_DEC_CLASSES
&& ! (in_inc_dec[i] && forbidden_inc_dec_class[class])
#endif
+#ifdef CLASS_CANNOT_CHANGE_MODE
+ && ! (REGNO_REG_SET_P (reg_changes_mode, i)
+ && ! class_can_change_mode [class])
+#endif
)
alt = reg_class_subunion[(int) alt][class];
if (alt == best)
alt = NO_REGS;
+ if (dump
+ && (reg_pref[i].prefclass != (int) best
+ || reg_pref[i].altclass != (int) alt))
+ {
+ static const char *const reg_class_names[] = REG_CLASS_NAMES;
+ fprintf (dump, " Register %i", i);
+ if (alt == ALL_REGS || best == ALL_REGS)
+ fprintf (dump, " pref %s\n", reg_class_names[(int) best]);
+ else if (alt == NO_REGS)
+ fprintf (dump, " pref %s or none\n", reg_class_names[(int) best]);
+ else
+ fprintf (dump, " pref %s, else %s\n",
+ reg_class_names[(int) best],
+ reg_class_names[(int) alt]);
+ }
+
/* We cast to (int) because (char) hits bugs in some compilers. */
- prefclass[i] = (int) best;
- altclass[i] = (int) alt;
+ reg_pref[i].prefclass = (int) best;
+ reg_pref[i].altclass = (int) alt;
}
}
-#endif /* REGISTER_CONSTRAINTS */
+
+#ifdef FORBIDDEN_INC_DEC_CLASSES
+ free (in_inc_dec);
+#endif
+#ifdef CLASS_CANNOT_CHANGE_MODE
+ BITMAP_XFREE (reg_changes_mode);
+#endif
+ free (costs);
}
\f
-#ifdef REGISTER_CONSTRAINTS
-
/* Record the cost of using memory or registers of various classes for
the operands in INSN.
alternatives. */
static void
-record_reg_classes (n_alts, n_ops, ops, modes, constraints, insn)
+record_reg_classes (n_alts, n_ops, ops, modes,
+ constraints, insn, op_costs, reg_pref)
int n_alts;
int n_ops;
rtx *ops;
enum machine_mode *modes;
- char **constraints;
+ const char **constraints;
rtx insn;
+ struct costs *op_costs;
+ struct reg_pref *reg_pref;
{
int alt;
- enum op_type {OP_READ, OP_WRITE, OP_READ_WRITE} op_types[MAX_RECOG_OPERANDS];
int i, j;
rtx set;
- /* By default, each operand is an input operand. */
-
- for (i = 0; i < n_ops; i++)
- op_types[i] = OP_READ;
-
/* Process each alternative, each time minimizing an operand's cost with
the cost for each operand in that alternative. */
int alt_fail = 0;
int alt_cost = 0;
enum reg_class classes[MAX_RECOG_OPERANDS];
+ int allows_mem[MAX_RECOG_OPERANDS];
int class;
for (i = 0; i < n_ops; i++)
{
- char *p = constraints[i];
+ const char *p = constraints[i];
rtx op = ops[i];
enum machine_mode mode = modes[i];
- int allows_mem = 0;
+ int allows_addr = 0;
int win = 0;
- char c;
+ unsigned char c;
+
+ /* Initially show we know nothing about the register class. */
+ classes[i] = NO_REGS;
+ allows_mem[i] = 0;
/* If this operand has no constraints at all, we can conclude
nothing about it since anything is valid. */
if (*p == 0)
{
if (GET_CODE (op) == REG && REGNO (op) >= FIRST_PSEUDO_REGISTER)
- bzero ((char *) &this_op_costs[i], sizeof this_op_costs[i]);
+ memset ((char *) &this_op_costs[i], 0, sizeof this_op_costs[i]);
continue;
}
- if (*p == '%')
- p++;
-
/* If this alternative is only relevant when this operand
matches a previous operand, we do different things depending
- on whether this operand is a pseudo-reg or not. */
+ on whether this operand is a pseudo-reg or not. We must process
+ any modifiers for the operand before we can make this test. */
+
+ while (*p == '%' || *p == '=' || *p == '+' || *p == '&')
+ p++;
if (p[0] >= '0' && p[0] <= '0' + i && (p[1] == ',' || p[1] == 0))
{
+ /* Copy class and whether memory is allowed from the matching
+ alternative. Then perform any needed cost computations
+ and/or adjustments. */
j = p[0] - '0';
classes[i] = classes[j];
+ allows_mem[i] = allows_mem[j];
if (GET_CODE (op) != REG || REGNO (op) < FIRST_PSEUDO_REGISTER)
{
}
else
{
- /* The costs of this operand are the same as that of the
- other operand. However, if we cannot tie them, this
- alternative needs to do a copy, which is one
- instruction. */
+ /* The costs of this operand are not the same as the other
+ operand since move costs are not symmetric. Moreover,
+ if we cannot tie them, this alternative needs to do a
+ copy, which is one instruction. */
+
+ struct costs *pp = &this_op_costs[i];
+
+ for (class = 0; class < N_REG_CLASSES; class++)
+ pp->cost[class]
+ = ((recog_data.operand_type[i] != OP_OUT
+ ? may_move_in_cost[mode][class][(int) classes[i]]
+ : 0)
+ + (recog_data.operand_type[i] != OP_IN
+ ? may_move_out_cost[mode][(int) classes[i]][class]
+ : 0));
+
+ /* If the alternative actually allows memory, make things
+ a bit cheaper since we won't need an extra insn to
+ load it. */
+
+ pp->mem_cost
+ = ((recog_data.operand_type[i] != OP_IN
+ ? MEMORY_MOVE_COST (mode, classes[i], 0)
+ : 0)
+ + (recog_data.operand_type[i] != OP_OUT
+ ? MEMORY_MOVE_COST (mode, classes[i], 1)
+ : 0) - allows_mem[i]);
+
+ /* If we have assigned a class to this register in our
+ first pass, add a cost to this alternative corresponding
+ to what we would add if this register were not in the
+ appropriate class. */
+
+ if (reg_pref)
+ alt_cost
+ += (may_move_in_cost[mode]
+ [(unsigned char) reg_pref[REGNO (op)].prefclass]
+ [(int) classes[i]]);
- this_op_costs[i] = this_op_costs[j];
if (REGNO (ops[i]) != REGNO (ops[j])
&& ! find_reg_note (insn, REG_DEAD, op))
alt_cost += 2;
any of the constraints. Collect the valid register classes
and see if this operand accepts memory. */
- classes[i] = NO_REGS;
while (*p && (c = *p++) != ',')
switch (c)
{
- case '=':
- op_types[i] = OP_WRITE;
- break;
-
- case '+':
- op_types[i] = OP_READ_WRITE;
- break;
-
case '*':
/* Ignore the next letter for this pass. */
p++;
case '?':
alt_cost += 2;
- case '%':
- case '!': case '#':
- case '&':
+ case '!': case '#': case '&':
case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ break;
+
case 'p':
+ allows_addr = 1;
+ win = address_operand (op, GET_MODE (op));
+ /* We know this operand is an address, so we want it to be
+ allocated to a register that can be the base of an
+ address, ie BASE_REG_CLASS. */
+ classes[i]
+ = reg_class_subunion[(int) classes[i]]
+ [(int) BASE_REG_CLASS];
break;
case 'm': case 'o': case 'V':
/* It doesn't seem worth distinguishing between offsettable
and non-offsettable addresses here. */
- allows_mem = 1;
+ allows_mem[i] = 1;
if (GET_CODE (op) == MEM)
win = 1;
break;
win = 1;
break;
-#ifdef EXTRA_CONSTRAINT
- case 'Q':
- case 'R':
- case 'S':
- case 'T':
- case 'U':
- if (EXTRA_CONSTRAINT (op, c))
- win = 1;
- break;
-#endif
-
case 'g':
if (GET_CODE (op) == MEM
|| (CONSTANT_P (op)
#endif
))
win = 1;
- allows_mem = 1;
+ allows_mem[i] = 1;
case 'r':
classes[i]
= reg_class_subunion[(int) classes[i]][(int) GENERAL_REGS];
break;
default:
- classes[i]
- = reg_class_subunion[(int) classes[i]]
- [(int) REG_CLASS_FROM_LETTER (c)];
+ if (REG_CLASS_FROM_LETTER (c) != NO_REGS)
+ classes[i]
+ = reg_class_subunion[(int) classes[i]]
+ [(int) REG_CLASS_FROM_LETTER (c)];
+#ifdef EXTRA_CONSTRAINT
+ else if (EXTRA_CONSTRAINT (op, c))
+ win = 1;
+#endif
+ break;
}
constraints[i] = p;
if (GET_CODE (op) == REG && REGNO (op) >= FIRST_PSEUDO_REGISTER)
{
if (classes[i] == NO_REGS)
- alt_fail = 1;
+ {
+ /* We must always fail if the operand is a REG, but
+ we did not find a suitable class.
+
+ Otherwise we may perform an uninitialized read
+ from this_op_costs after the `continue' statement
+ below. */
+ alt_fail = 1;
+ }
else
{
struct costs *pp = &this_op_costs[i];
for (class = 0; class < N_REG_CLASSES; class++)
- pp->cost[class] = may_move_cost[class][(int) classes[i]];
+ pp->cost[class]
+ = ((recog_data.operand_type[i] != OP_OUT
+ ? may_move_in_cost[mode][class][(int) classes[i]]
+ : 0)
+ + (recog_data.operand_type[i] != OP_IN
+ ? may_move_out_cost[mode][(int) classes[i]][class]
+ : 0));
/* If the alternative actually allows memory, make things
a bit cheaper since we won't need an extra insn to
load it. */
- pp->mem_cost = (MEMORY_MOVE_COST (mode, classes[i], 1)
- - allows_mem);
+ pp->mem_cost
+ = ((recog_data.operand_type[i] != OP_IN
+ ? MEMORY_MOVE_COST (mode, classes[i], 0)
+ : 0)
+ + (recog_data.operand_type[i] != OP_OUT
+ ? MEMORY_MOVE_COST (mode, classes[i], 1)
+ : 0) - allows_mem[i]);
/* If we have assigned a class to this register in our
first pass, add a cost to this alternative corresponding
to what we would add if this register were not in the
appropriate class. */
- if (prefclass)
+ if (reg_pref)
alt_cost
- += may_move_cost[prefclass[REGNO (op)]][(int) classes[i]];
+ += (may_move_in_cost[mode]
+ [(unsigned char) reg_pref[REGNO (op)].prefclass]
+ [(int) classes[i]]);
}
}
else if (classes[i] != NO_REGS)
{
- if (op_types[i] != OP_WRITE)
+ if (recog_data.operand_type[i] != OP_OUT)
alt_cost += copy_cost (op, mode, classes[i], 1);
- if (op_types[i] != OP_READ)
+ if (recog_data.operand_type[i] != OP_IN)
alt_cost += copy_cost (op, mode, classes[i], 0);
}
/* The only other way this alternative can be used is if this is a
constant that could be placed into memory. */
- else if (CONSTANT_P (op) && allows_mem)
+ else if (CONSTANT_P (op) && (allows_addr || allows_mem[i]))
alt_cost += MEMORY_MOVE_COST (mode, classes[i], 1);
else
alt_fail = 1;
&& REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER)
{
struct costs *pp = &op_costs[i], *qq = &this_op_costs[i];
- int scale = 1 + (op_types[i] == OP_READ_WRITE);
+ int scale = 1 + (recog_data.operand_type[i] == OP_INOUT);
pp->mem_cost = MIN (pp->mem_cost,
(qq->mem_cost + alt_cost) * scale);
}
/* If this insn is a single set copying operand 1 to operand 0
- and one is a pseudo with the other a hard reg that is in its
- own register class, set the cost of that register class to -1. */
+ and one operand is a pseudo with the other a hard reg or a pseudo
+ that prefers a register that is in its own register class then
+ we may want to adjust the cost of that register class to -1.
+
+ Avoid the adjustment if the source does not die to avoid stressing of
+ register allocator by preferrencing two coliding registers into single
+ class.
+
+ Also avoid the adjustment if a copy between registers of the class
+ is expensive (ten times the cost of a default copy is considered
+ arbitrarily expensive). This avoids losing when the preferred class
+ is very expensive as the source of a copy instruction. */
if ((set = single_set (insn)) != 0
&& ops[0] == SET_DEST (set) && ops[1] == SET_SRC (set)
- && GET_CODE (ops[0]) == REG && GET_CODE (ops[1]) == REG)
+ && GET_CODE (ops[0]) == REG && GET_CODE (ops[1]) == REG
+ && find_regno_note (insn, REG_DEAD, REGNO (ops[1])))
for (i = 0; i <= 1; i++)
if (REGNO (ops[i]) >= FIRST_PSEUDO_REGISTER)
{
- int regno = REGNO (ops[!i]);
+ unsigned int regno = REGNO (ops[!i]);
enum machine_mode mode = GET_MODE (ops[!i]);
int class;
- int nr;
+ unsigned int nr;
+
+ if (regno >= FIRST_PSEUDO_REGISTER && reg_pref != 0)
+ {
+ enum reg_class pref = reg_pref[regno].prefclass;
- if (regno >= FIRST_PSEUDO_REGISTER && prefclass != 0
- && (reg_class_size[prefclass[regno]]
- == CLASS_MAX_NREGS (prefclass[regno], mode)))
- op_costs[i].cost[prefclass[regno]] = -1;
+ if ((reg_class_size[(unsigned char) pref]
+ == CLASS_MAX_NREGS (pref, mode))
+ && REGISTER_MOVE_COST (mode, pref, pref) < 10 * 2)
+ op_costs[i].cost[(unsigned char) pref] = -1;
+ }
else if (regno < FIRST_PSEUDO_REGISTER)
for (class = 0; class < N_REG_CLASSES; class++)
if (TEST_HARD_REG_BIT (reg_class_contents[class], regno)
op_costs[i].cost[class] = -1;
else
{
- for (nr = 0; nr < HARD_REGNO_NREGS(regno, mode); nr++)
+ for (nr = 0; nr < HARD_REGNO_NREGS (regno, mode); nr++)
{
- if (!TEST_HARD_REG_BIT (reg_class_contents[class], regno + nr))
+ if (! TEST_HARD_REG_BIT (reg_class_contents[class],
+ regno + nr))
break;
}
- if (nr == HARD_REGNO_NREGS(regno,mode))
+ if (nr == HARD_REGNO_NREGS (regno,mode))
op_costs[i].cost[class] = -1;
}
}
static int
copy_cost (x, mode, class, to_p)
rtx x;
- enum machine_mode mode;
+ enum machine_mode mode ATTRIBUTE_UNUSED;
enum reg_class class;
- int to_p;
+ int to_p ATTRIBUTE_UNUSED;
{
#ifdef HAVE_SECONDARY_RELOADS
enum reg_class secondary_class = NO_REGS;
#endif
if (secondary_class != NO_REGS)
- return (move_cost[(int) secondary_class][(int) class]
+ return (move_cost[mode][(int) secondary_class][(int) class]
+ copy_cost (x, mode, secondary_class, 2));
#endif /* HAVE_SECONDARY_RELOADS */
return MEMORY_MOVE_COST (mode, class, to_p);
else if (GET_CODE (x) == REG)
- return move_cost[(int) REGNO_REG_CLASS (REGNO (x))][(int) class];
+ return move_cost[mode][(int) REGNO_REG_CLASS (REGNO (x))][(int) class];
else
/* If this is a constant, we may eventually want to call rtx_cost here. */
- return 2;
+ return COSTS_N_INSNS (1);
}
\f
/* Record the pseudo registers we must reload into hard registers
/* When we have an address that is a sum,
we must determine whether registers are "base" or "index" regs.
If there is a sum of two registers, we must choose one to be
- the "base". Luckily, we can use the REGNO_POINTER_FLAG
- to make a good choice most of the time. We only need to do this
- on machines that can have two registers in an address and where
- the base and index register classes are different.
+ the "base". Luckily, we can use the REG_POINTER to make a good
+ choice most of the time. We only need to do this on machines
+ that can have two registers in an address and where the base
+ and index register classes are different.
??? This code used to set REGNO_POINTER_FLAG in some cases, but
that seems bogus since it should only be set when we are sure
with the other operand the index. Likewise if the other operand
is a MULT. */
- else if ((code0 == REG && REGNO_POINTER_FLAG (REGNO (arg0)))
+ else if ((code0 == REG && REG_POINTER (arg0))
|| code1 == MULT)
{
record_address_regs (arg0, BASE_REG_CLASS, scale);
record_address_regs (arg1, INDEX_REG_CLASS, scale);
}
- else if ((code1 == REG && REGNO_POINTER_FLAG (REGNO (arg1)))
+ else if ((code1 == REG && REG_POINTER (arg1))
|| code0 == MULT)
{
record_address_regs (arg0, INDEX_REG_CLASS, scale);
}
break;
+ /* Double the importance of a pseudo register that is incremented
+ or decremented, since it would take two extra insns
+ if it ends up in the wrong place. */
+ case POST_MODIFY:
+ case PRE_MODIFY:
+ record_address_regs (XEXP (x, 0), BASE_REG_CLASS, 2 * scale);
+ if (REG_P (XEXP (XEXP (x, 1), 1)))
+ record_address_regs (XEXP (XEXP (x, 1), 1),
+ INDEX_REG_CLASS, 2 * scale);
+ break;
+
case POST_INC:
case PRE_INC:
case POST_DEC:
pp->mem_cost += (MEMORY_MOVE_COST (Pmode, class, 1) * scale) / 2;
for (i = 0; i < N_REG_CLASSES; i++)
- pp->cost[i] += (may_move_cost[i][(int) class] * scale) / 2;
+ pp->cost[i] += (may_move_in_cost[Pmode][i][(int) class] * scale) / 2;
}
break;
default:
{
- register char *fmt = GET_RTX_FORMAT (code);
+ register const char *fmt = GET_RTX_FORMAT (code);
register int i;
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
if (fmt[i] == 'e')
rtx reg;
enum machine_mode mode;
{
-#ifdef HAVE_POST_INCREMENT
- if (memory_address_p (mode, gen_rtx_POST_INC (Pmode, reg)))
+ if (HAVE_POST_INCREMENT
+ && memory_address_p (mode, gen_rtx_POST_INC (Pmode, reg)))
return 1;
-#endif
-#ifdef HAVE_POST_DECREMENT
- if (memory_address_p (mode, gen_rtx_POST_DEC (Pmode, reg)))
+ if (HAVE_POST_DECREMENT
+ && memory_address_p (mode, gen_rtx_POST_DEC (Pmode, reg)))
return 1;
-#endif
-#ifdef HAVE_PRE_INCREMENT
- if (memory_address_p (mode, gen_rtx_PRE_INC (Pmode, reg)))
+ if (HAVE_PRE_INCREMENT
+ && memory_address_p (mode, gen_rtx_PRE_INC (Pmode, reg)))
return 1;
-#endif
-#ifdef HAVE_PRE_DECREMENT
- if (memory_address_p (mode, gen_rtx_PRE_DEC (Pmode, reg)))
+ if (HAVE_PRE_DECREMENT
+ && memory_address_p (mode, gen_rtx_PRE_DEC (Pmode, reg)))
return 1;
-#endif
return 0;
}
#endif
-
-#endif /* REGISTER_CONSTRAINTS */
\f
+static short *renumber;
+static size_t regno_allocated;
+static unsigned int reg_n_max;
+
/* Allocate enough space to hold NUM_REGS registers for the tables used for
reg_scan and flow_analysis that are indexed by the register number. If
NEW_P is non zero, initialize all of the registers, otherwise only
int new_p;
int renumber_p;
{
- static size_t regno_allocated = 0;
- static short *renumber = (short *)0;
- int i;
size_t size_info;
size_t size_renumber;
size_t min = (new_p) ? 0 : reg_n_max;
struct reg_info_data *reg_data;
- struct reg_info_data *reg_next;
-
- /* Free up all storage allocated */
- if (num_regs < 0)
- {
- if (reg_n_info)
- {
- VARRAY_FREE (reg_n_info);
- for (reg_data = reg_info_head; reg_data; reg_data = reg_next)
- {
- reg_next = reg_data->next;
- free ((char *)reg_data);
- }
-
- free (prefclass_buffer);
- free (altclass_buffer);
- prefclass_buffer = (char *)0;
- altclass_buffer = (char *)0;
- reg_info_head = (struct reg_info_data *)0;
- renumber = (short *)0;
- }
- regno_allocated = 0;
- reg_n_max = 0;
- return;
- }
if (num_regs > regno_allocated)
{
{
VARRAY_REG_INIT (reg_n_info, regno_allocated, "reg_n_info");
renumber = (short *) xmalloc (size_renumber);
- prefclass_buffer = (char *) xmalloc (regno_allocated);
- altclass_buffer = (char *) xmalloc (regno_allocated);
+ reg_pref_buffer = (struct reg_pref *) xmalloc (regno_allocated
+ * sizeof (struct reg_pref));
}
else
if (new_p) /* if we're zapping everything, no need to realloc */
{
free ((char *)renumber);
- free ((char *)prefclass_buffer);
- free ((char *)altclass_buffer);
+ free ((char *)reg_pref);
renumber = (short *) xmalloc (size_renumber);
- prefclass_buffer = (char *) xmalloc (regno_allocated);
- altclass_buffer = (char *) xmalloc (regno_allocated);
+ reg_pref_buffer = (struct reg_pref *) xmalloc (regno_allocated
+ * sizeof (struct reg_pref));
}
else
{
renumber = (short *) xrealloc ((char *)renumber, size_renumber);
- prefclass_buffer = (char *) xrealloc ((char *)prefclass_buffer,
- regno_allocated);
-
- altclass_buffer = (char *) xrealloc ((char *)altclass_buffer,
- regno_allocated);
+ reg_pref_buffer = (struct reg_pref *) xrealloc ((char *)reg_pref_buffer,
+ regno_allocated
+ * sizeof (struct reg_pref));
}
}
{
/* Loop through each of the segments allocated for the actual
reg_info pages, and set up the pointers, zero the pages, etc. */
- for (reg_data = reg_info_head; reg_data; reg_data = reg_next)
+ for (reg_data = reg_info_head;
+ reg_data && reg_data->max_index >= min;
+ reg_data = reg_data->next)
{
size_t min_index = reg_data->min_index;
size_t max_index = reg_data->max_index;
+ size_t max = MIN (max_index, num_regs);
+ size_t local_min = min - min_index;
+ size_t i;
- reg_next = reg_data->next;
- if (min_index <= regno_allocated)
- {
- size_t max = max_index;
- if (max > regno_allocated)
- max = regno_allocated;
- if (!reg_data->used_p) /* page just allocated with calloc */
- reg_data->used_p = 1; /* no need to zero */
- else
- bzero ((char *) ®_data->data,
- sizeof (reg_info) * (max - min_index + 1));
+ if (reg_data->min_index > num_regs)
+ continue;
- for (i = min_index; i <= max; i++)
- {
- VARRAY_REG (reg_n_info, i) = ®_data->data[i-min_index];
- REG_BASIC_BLOCK (i) = REG_BLOCK_UNKNOWN;
- renumber[i] = -1;
- prefclass_buffer[i] = (char) NO_REGS;
- altclass_buffer[i] = (char) NO_REGS;
- }
+ if (min < min_index)
+ local_min = 0;
+ if (!reg_data->used_p) /* page just allocated with calloc */
+ reg_data->used_p = 1; /* no need to zero */
+ else
+ memset ((char *) ®_data->data[local_min], 0,
+ sizeof (reg_info) * (max - min_index - local_min + 1));
+
+ for (i = min_index+local_min; i <= max; i++)
+ {
+ VARRAY_REG (reg_n_info, i) = ®_data->data[i-min_index];
+ REG_BASIC_BLOCK (i) = REG_BLOCK_UNKNOWN;
+ renumber[i] = -1;
+ reg_pref_buffer[i].prefclass = (char) NO_REGS;
+ reg_pref_buffer[i].altclass = (char) NO_REGS;
}
}
}
/* If {pref,alt}class have already been allocated, update the pointers to
the newly realloced ones. */
- if (prefclass)
- {
- prefclass = prefclass_buffer;
- altclass = altclass_buffer;
- }
+ if (reg_pref)
+ reg_pref = reg_pref_buffer;
if (renumber_p)
reg_renumber = renumber;
MAX_REGNO_REG_SET (num_regs, new_p, renumber_p);
}
+/* Free up the space allocated by allocate_reg_info. */
+void
+free_reg_info ()
+{
+ if (reg_n_info)
+ {
+ struct reg_info_data *reg_data;
+ struct reg_info_data *reg_next;
+
+ VARRAY_FREE (reg_n_info);
+ for (reg_data = reg_info_head; reg_data; reg_data = reg_next)
+ {
+ reg_next = reg_data->next;
+ free ((char *)reg_data);
+ }
+
+ free (reg_pref_buffer);
+ reg_pref_buffer = (struct reg_pref *)0;
+ reg_info_head = (struct reg_info_data *)0;
+ renumber = (short *)0;
+ }
+ regno_allocated = 0;
+ reg_n_max = 0;
+}
\f
/* This is the `regscan' pass of the compiler, run just before cse
and again just before loop.
/* Maximum number of parallel sets and clobbers in any insn in this fn.
Always at least 3, since the combiner could put that many together
- and we want this to remain correct for all the remaining passes. */
+ and we want this to remain correct for all the remaining passes.
+ This corresponds to the maximum number of times note_stores will call
+ a function for any insn. */
int max_parallel;
+/* Used as a temporary to record the largest number of registers in
+ PARALLEL in a SET_DEST. This is added to max_parallel. */
+
+static int max_set_parallel;
+
void
reg_scan (f, nregs, repeat)
rtx f;
- int nregs;
- int repeat;
+ unsigned int nregs;
+ int repeat ATTRIBUTE_UNUSED;
{
register rtx insn;
allocate_reg_info (nregs, TRUE, FALSE);
max_parallel = 3;
+ max_set_parallel = 0;
for (insn = f; insn; insn = NEXT_INSN (insn))
if (GET_CODE (insn) == INSN
if (GET_CODE (PATTERN (insn)) == PARALLEL
&& XVECLEN (PATTERN (insn), 0) > max_parallel)
max_parallel = XVECLEN (PATTERN (insn), 0);
- reg_scan_mark_refs (PATTERN (insn), insn, 0);
+ reg_scan_mark_refs (PATTERN (insn), insn, 0, 0);
if (REG_NOTES (insn))
- reg_scan_mark_refs (REG_NOTES (insn), insn, 1);
+ reg_scan_mark_refs (REG_NOTES (insn), insn, 1, 0);
+ }
+
+ max_parallel += max_set_parallel;
+}
+
+/* Update 'regscan' information by looking at the insns
+ from FIRST to LAST. Some new REGs have been created,
+ and any REG with number greater than OLD_MAX_REGNO is
+ such a REG. We only update information for those. */
+
+void
+reg_scan_update (first, last, old_max_regno)
+ rtx first;
+ rtx last;
+ unsigned int old_max_regno;
+{
+ register rtx insn;
+
+ allocate_reg_info (max_reg_num (), FALSE, FALSE);
+
+ for (insn = first; insn != last; insn = NEXT_INSN (insn))
+ if (GET_CODE (insn) == INSN
+ || GET_CODE (insn) == CALL_INSN
+ || GET_CODE (insn) == JUMP_INSN)
+ {
+ if (GET_CODE (PATTERN (insn)) == PARALLEL
+ && XVECLEN (PATTERN (insn), 0) > max_parallel)
+ max_parallel = XVECLEN (PATTERN (insn), 0);
+ reg_scan_mark_refs (PATTERN (insn), insn, 0, old_max_regno);
+
+ if (REG_NOTES (insn))
+ reg_scan_mark_refs (REG_NOTES (insn), insn, 1, old_max_regno);
}
}
/* X is the expression to scan. INSN is the insn it appears in.
- NOTE_FLAG is nonzero if X is from INSN's notes rather than its body. */
+ NOTE_FLAG is nonzero if X is from INSN's notes rather than its body.
+ We should only record information for REGs with numbers
+ greater than or equal to MIN_REGNO. */
static void
-reg_scan_mark_refs (x, insn, note_flag)
+reg_scan_mark_refs (x, insn, note_flag, min_regno)
rtx x;
rtx insn;
int note_flag;
+ unsigned int min_regno;
{
- register enum rtx_code code = GET_CODE (x);
+ register enum rtx_code code;
register rtx dest;
register rtx note;
+ code = GET_CODE (x);
switch (code)
{
- case CONST_INT:
case CONST:
+ case CONST_INT:
case CONST_DOUBLE:
case CC0:
case PC:
case REG:
{
- register int regno = REGNO (x);
+ unsigned int regno = REGNO (x);
- REGNO_LAST_NOTE_UID (regno) = INSN_UID (insn);
- if (!note_flag)
- REGNO_LAST_UID (regno) = INSN_UID (insn);
- if (REGNO_FIRST_UID (regno) == 0)
- REGNO_FIRST_UID (regno) = INSN_UID (insn);
+ if (regno >= min_regno)
+ {
+ REGNO_LAST_NOTE_UID (regno) = INSN_UID (insn);
+ if (!note_flag)
+ REGNO_LAST_UID (regno) = INSN_UID (insn);
+ if (REGNO_FIRST_UID (regno) == 0)
+ REGNO_FIRST_UID (regno) = INSN_UID (insn);
+ }
}
break;
case EXPR_LIST:
if (XEXP (x, 0))
- reg_scan_mark_refs (XEXP (x, 0), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, 0), insn, note_flag, min_regno);
if (XEXP (x, 1))
- reg_scan_mark_refs (XEXP (x, 1), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno);
break;
case INSN_LIST:
if (XEXP (x, 1))
- reg_scan_mark_refs (XEXP (x, 1), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, 1), insn, note_flag, min_regno);
break;
case SET:
dest = XEXP (dest, 0))
;
- if (GET_CODE (dest) == REG)
+ /* For a PARALLEL, record the number of things (less the usual one for a
+ SET) that are set. */
+ if (GET_CODE (dest) == PARALLEL)
+ max_set_parallel = MAX (max_set_parallel, XVECLEN (dest, 0) - 1);
+
+ if (GET_CODE (dest) == REG
+ && REGNO (dest) >= min_regno)
REG_N_SETS (REGNO (dest))++;
/* If this is setting a pseudo from another pseudo or the sum of a
if (GET_CODE (SET_DEST (x)) == REG
&& REGNO (SET_DEST (x)) >= FIRST_PSEUDO_REGISTER
+ && REGNO (SET_DEST (x)) >= min_regno
/* If the destination pseudo is set more than once, then other
sets might not be to a pointer value (consider access to a
union in two threads of control in the presense of global
- optimizations). So only set REGNO_POINTER_FLAG on the destination
+ optimizations). So only set REG_POINTER on the destination
pseudo if this is the only set of that pseudo. */
&& REG_N_SETS (REGNO (SET_DEST (x))) == 1
&& ! REG_USERVAR_P (SET_DEST (x))
- && ! REGNO_POINTER_FLAG (REGNO (SET_DEST (x)))
+ && ! REG_POINTER (SET_DEST (x))
&& ((GET_CODE (SET_SRC (x)) == REG
- && REGNO_POINTER_FLAG (REGNO (SET_SRC (x))))
+ && REG_POINTER (SET_SRC (x)))
|| ((GET_CODE (SET_SRC (x)) == PLUS
|| GET_CODE (SET_SRC (x)) == LO_SUM)
&& GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
&& GET_CODE (XEXP (SET_SRC (x), 0)) == REG
- && REGNO_POINTER_FLAG (REGNO (XEXP (SET_SRC (x), 0))))
+ && REG_POINTER (XEXP (SET_SRC (x), 0)))
|| GET_CODE (SET_SRC (x)) == CONST
|| GET_CODE (SET_SRC (x)) == SYMBOL_REF
|| GET_CODE (SET_SRC (x)) == LABEL_REF
&& (GET_CODE (XEXP (note, 0)) == CONST
|| GET_CODE (XEXP (note, 0)) == SYMBOL_REF
|| GET_CODE (XEXP (note, 0)) == LABEL_REF))))
- REGNO_POINTER_FLAG (REGNO (SET_DEST (x))) = 1;
+ REG_POINTER (SET_DEST (x)) = 1;
/* ... fall through ... */
default:
{
- register char *fmt = GET_RTX_FORMAT (code);
+ register const char *fmt = GET_RTX_FORMAT (code);
register int i;
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
if (fmt[i] == 'e')
- reg_scan_mark_refs (XEXP (x, i), insn, note_flag);
+ reg_scan_mark_refs (XEXP (x, i), insn, note_flag, min_regno);
else if (fmt[i] == 'E' && XVEC (x, i) != 0)
{
register int j;
for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- reg_scan_mark_refs (XVECEXP (x, i, j), insn, note_flag);
+ reg_scan_mark_refs (XVECEXP (x, i, j), insn, note_flag, min_regno);
}
}
}
void
regset_release_memory ()
{
- if (basic_block_live_at_start)
- {
- free_regset_vector (basic_block_live_at_start, n_basic_blocks);
- basic_block_live_at_start = 0;
- }
-
- FREE_REG_SET (regs_live_at_setjmp);
bitmap_release_memory ();
}