/* Register to Stack convert for GNU compiler.
- Copyright (C) 1992, 93-98, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2001 Free Software Foundation, Inc.
-This file is part of GNU CC.
+ This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
/* This pass converts stack-like registers from the "flat register
file" model that gcc uses, to a stack convention that the 387 uses.
asm ("fyl2xp1" : "=t" (result) : "0" (x), "u" (y) : "st(1)");
- */
+*/
\f
#include "config.h"
#include "system.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "flags.h"
-#include "insn-flags.h"
#include "toplev.h"
#include "recog.h"
+#include "output.h"
+#include "basic-block.h"
#include "varray.h"
+#include "reload.h"
#ifdef STACK_REGS
{
int top; /* index to top stack element */
HARD_REG_SET reg_set; /* set of live registers */
- char reg[REG_STACK_SIZE]; /* register - stack mapping */
+ unsigned char reg[REG_STACK_SIZE];/* register - stack mapping */
} *stack;
-/* highest instruction uid */
-static int max_uid = 0;
+/* This is used to carry information about basic blocks. It is
+ attached to the AUX field of the standard CFG block. */
-/* Number of basic blocks in the current function. */
-static int blocks;
-
-/* Element N is first insn in basic block N.
- This info lasts until we finish compiling the function. */
-static rtx *block_begin;
-
-/* Element N is last insn in basic block N.
- This info lasts until we finish compiling the function. */
-static rtx *block_end;
-
-/* Element N is nonzero if control can drop into basic block N */
-static char *block_drops_in;
-
-/* Element N says all about the stack at entry block N */
-static stack block_stack_in;
-
-/* Element N says all about the stack life at the end of block N */
-static HARD_REG_SET *block_out_reg_set;
-
-/* This is where the BLOCK_NUM values are really stored. This is set
- up by find_blocks and used there and in life_analysis. It can be used
- later, but only to look up an insn that is the head or tail of some
- block. life_analysis and the stack register conversion process can
- add insns within a block. */
-static int *block_number;
+typedef struct block_info_def
+{
+ struct stack_def stack_in; /* Input stack configuration. */
+ struct stack_def stack_out; /* Output stack configuration. */
+ HARD_REG_SET out_reg_set; /* Stack regs live on output. */
+ int done; /* True if block already converted. */
+ int predecesors; /* Number of predecesors that needs
+ to be visited. */
+} *block_info;
+
+#define BLOCK_INFO(B) ((block_info) (B)->aux)
+
+/* Passed to change_stack to indicate where to emit insns. */
+enum emit_where
+{
+ EMIT_AFTER,
+ EMIT_BEFORE
+};
/* We use this array to cache info about insns, because otherwise we
spend too much time in stack_regs_mentioned_p.
stack registers. */
static varray_type stack_regs_mentioned_data;
+/* The block we're currently working on. */
+static basic_block current_block;
+
/* This is the register file for all register after conversion */
static rtx
FP_mode_reg[LAST_STACK_REG+1-FIRST_STACK_REG][(int) MAX_MACHINE_MODE];
#define FP_MODE_REG(regno,mode) \
(FP_mode_reg[(regno)-FIRST_STACK_REG][(int)(mode)])
-/* Get the basic block number of an insn. See note at block_number
- definition are validity of this information. */
-
-#define BLOCK_NUM(INSN) \
- ((INSN_UID (INSN) > max_uid) \
- ? (abort() , -1) : block_number[INSN_UID (INSN)])
+/* Used to initialize uninitialized registers. */
+static rtx nan;
/* Forward declarations */
-static int stack_regs_mentioned_p PROTO((rtx pat));
-static void mark_regs_pat PROTO((rtx, HARD_REG_SET *));
-static void straighten_stack PROTO((rtx, stack));
-static void pop_stack PROTO((stack, int));
-static void record_label_references PROTO((rtx, rtx));
-static rtx *get_true_reg PROTO((rtx *));
-
-static void record_asm_reg_life PROTO((rtx, stack));
-static void record_reg_life_pat PROTO((rtx, HARD_REG_SET *,
- HARD_REG_SET *, int));
-static int get_asm_operand_n_inputs PROTO((rtx));
-static void record_reg_life PROTO((rtx, int, stack));
-static void find_blocks PROTO((rtx));
-static rtx stack_result PROTO((tree));
-static void stack_reg_life_analysis PROTO((rtx, HARD_REG_SET *));
-static void replace_reg PROTO((rtx *, int));
-static void remove_regno_note PROTO((rtx, enum reg_note, int));
-static int get_hard_regnum PROTO((stack, rtx));
-static void delete_insn_for_stacker PROTO((rtx));
-static rtx emit_pop_insn PROTO((rtx, stack, rtx, rtx (*) ()));
-static void emit_swap_insn PROTO((rtx, stack, rtx));
-static void move_for_stack_reg PROTO((rtx, stack, rtx));
-static int swap_rtx_condition_1 PROTO((rtx));
-static int swap_rtx_condition PROTO((rtx));
-static void compare_for_stack_reg PROTO((rtx, stack, rtx));
-static void subst_stack_regs_pat PROTO((rtx, stack, rtx));
-static void subst_asm_stack_regs PROTO((rtx, stack));
-static void subst_stack_regs PROTO((rtx, stack));
-static void change_stack PROTO((rtx, stack, stack, rtx (*) ()));
-
-static void goto_block_pat PROTO((rtx, stack, rtx));
-static void convert_regs PROTO((void));
-static void print_blocks PROTO((FILE *, rtx, rtx));
-static void dump_stack_info PROTO((FILE *));
+static int stack_regs_mentioned_p PARAMS ((rtx pat));
+static void straighten_stack PARAMS ((rtx, stack));
+static void pop_stack PARAMS ((stack, int));
+static rtx *get_true_reg PARAMS ((rtx *));
+
+static int check_asm_stack_operands PARAMS ((rtx));
+static int get_asm_operand_n_inputs PARAMS ((rtx));
+static rtx stack_result PARAMS ((tree));
+static void replace_reg PARAMS ((rtx *, int));
+static void remove_regno_note PARAMS ((rtx, enum reg_note,
+ unsigned int));
+static int get_hard_regnum PARAMS ((stack, rtx));
+static void delete_insn_for_stacker PARAMS ((rtx));
+static rtx emit_pop_insn PARAMS ((rtx, stack, rtx,
+ enum emit_where));
+static void emit_swap_insn PARAMS ((rtx, stack, rtx));
+static void move_for_stack_reg PARAMS ((rtx, stack, rtx));
+static int swap_rtx_condition_1 PARAMS ((rtx));
+static int swap_rtx_condition PARAMS ((rtx));
+static void compare_for_stack_reg PARAMS ((rtx, stack, rtx));
+static void subst_stack_regs_pat PARAMS ((rtx, stack, rtx));
+static void subst_asm_stack_regs PARAMS ((rtx, stack));
+static void subst_stack_regs PARAMS ((rtx, stack));
+static void change_stack PARAMS ((rtx, stack, stack,
+ enum emit_where));
+static int convert_regs_entry PARAMS ((void));
+static void convert_regs_exit PARAMS ((void));
+static int convert_regs_1 PARAMS ((FILE *, basic_block));
+static int convert_regs_2 PARAMS ((FILE *, basic_block));
+static int convert_regs PARAMS ((FILE *));
+static void print_stack PARAMS ((FILE *, stack));
+static rtx next_flags_user PARAMS ((rtx));
+static void record_label_references PARAMS ((rtx, rtx));
+static bool compensate_edge PARAMS ((edge, FILE *));
\f
/* Return non-zero if any stack register is mentioned somewhere within PAT. */
unsigned int uid, max;
int test;
- if (GET_RTX_CLASS (GET_CODE (insn)) != 'i')
+ if (! INSN_P (insn) || !stack_regs_mentioned_data)
return 0;
uid = INSN_UID (insn);
{
/* Search forward looking for the first use of this value.
Stop at block boundaries. */
- /* ??? This really cries for BLOCK_END! */
- while (1)
+ while (insn != current_block->end)
{
insn = NEXT_INSN (insn);
- if (!insn)
- return NULL_RTX;
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i'
- && reg_mentioned_p (ix86_flags_rtx, PATTERN (insn)))
+ if (INSN_P (insn) && reg_mentioned_p (ix86_flags_rtx, PATTERN (insn)))
return insn;
- if (GET_CODE (insn) == JUMP_INSN
- || GET_CODE (insn) == CODE_LABEL
- || GET_CODE (insn) == CALL_INSN)
+ if (GET_CODE (insn) == CALL_INSN)
return NULL_RTX;
}
-}
-\f
-/* Mark all registers needed for this pattern. */
-
-static void
-mark_regs_pat (pat, set)
- rtx pat;
- HARD_REG_SET *set;
-{
- enum machine_mode mode;
- register int regno;
- register int count;
-
- if (GET_CODE (pat) == SUBREG)
- {
- mode = GET_MODE (pat);
- regno = SUBREG_WORD (pat);
- regno += REGNO (SUBREG_REG (pat));
- }
- else
- regno = REGNO (pat), mode = GET_MODE (pat);
-
- for (count = HARD_REGNO_NREGS (regno, mode);
- count; count--, regno++)
- SET_HARD_REG_BIT (*set, regno);
+ return NULL_RTX;
}
\f
/* Reorganise the stack into ascending numbers,
for (top = temp_stack.top = regstack->top; top >= 0; top--)
temp_stack.reg[top] = FIRST_STACK_REG + temp_stack.top - top;
- change_stack (insn, regstack, &temp_stack, emit_insn_after);
+ change_stack (insn, regstack, &temp_stack, EMIT_AFTER);
}
/* Pop a register from the stack */
register file. FIRST is the first insn in the function, FILE is the
dump file, if used.
- First compute the beginning and end of each basic block. Do a
- register life analysis on the stack registers, recording the result
- for the head and tail of each basic block. The convert each insn one
- by one. Run a last jump_optimize() pass, if optimizing, to eliminate
- any cross-jumping created when the converter inserts pop insns.*/
+ Construct a CFG and run life analysis. Then convert each insn one
+ by one. Run a last cleanup_cfg pass, if optimizing, to eliminate
+ code duplication created when the converter inserts pop insns on
+ the edges. */
void
reg_to_stack (first, file)
rtx first;
FILE *file;
{
- register rtx insn;
- register int i;
- int stack_reg_seen = 0;
- enum machine_mode mode;
- HARD_REG_SET stackentry;
-
- ix86_flags_rtx = gen_rtx_REG (CCmode, FLAGS_REG);
-
- max_uid = get_max_uid ();
- VARRAY_CHAR_INIT (stack_regs_mentioned_data, max_uid + 1,
- "stack_regs_mentioned cache");
-
- CLEAR_HARD_REG_SET (stackentry);
-
- {
- static int initialised;
- if (!initialised)
- {
-#if 0
- initialised = 1; /* This array can not have been previously
- initialised, because the rtx's are
- thrown away between compilations of
- functions. */
-#endif
- for (i = FIRST_STACK_REG; i <= LAST_STACK_REG; i++)
- {
- for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode;
- mode = GET_MODE_WIDER_MODE (mode))
- FP_MODE_REG (i, mode) = gen_rtx_REG (mode, i);
- for (mode = GET_CLASS_NARROWEST_MODE (MODE_COMPLEX_FLOAT); mode != VOIDmode;
- mode = GET_MODE_WIDER_MODE (mode))
- FP_MODE_REG (i, mode) = gen_rtx_REG (mode, i);
- }
- }
- }
-
- /* Count the basic blocks. Also find maximum insn uid. */
- {
- register RTX_CODE prev_code = BARRIER;
- register RTX_CODE code;
- register int before_function_beg = 1;
-
- max_uid = 0;
- blocks = 0;
- for (insn = first; insn; insn = NEXT_INSN (insn))
- {
- /* Note that this loop must select the same block boundaries
- as code in find_blocks. Also note that this code is not the
- same as that used in flow.c. */
-
- if (INSN_UID (insn) > max_uid)
- max_uid = INSN_UID (insn);
-
- code = GET_CODE (insn);
-
- if (code == CODE_LABEL
- || (prev_code != INSN
- && prev_code != CALL_INSN
- && prev_code != CODE_LABEL
- && GET_RTX_CLASS (code) == 'i'))
- blocks++;
-
- if (code == NOTE && NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_BEG)
- before_function_beg = 0;
-
- /* Remember whether or not this insn mentions an FP regs.
- Check JUMP_INSNs too, in case someone creates a funny PARALLEL. */
-
- if (GET_RTX_CLASS (code) == 'i'
- && stack_regs_mentioned_p (PATTERN (insn)))
- {
- stack_reg_seen = 1;
- VARRAY_CHAR (stack_regs_mentioned_data, INSN_UID (insn)) = 1;
-
- /* Note any register passing parameters. */
-
- if (before_function_beg && code == INSN
- && GET_CODE (PATTERN (insn)) == USE)
- record_reg_life_pat (PATTERN (insn), (HARD_REG_SET *) 0,
- &stackentry, 1);
- }
- else
- VARRAY_CHAR (stack_regs_mentioned_data, INSN_UID (insn)) = 2;
-
- if (code == CODE_LABEL)
- LABEL_REFS (insn) = insn; /* delete old chain */
-
- if (code != NOTE)
- prev_code = code;
- }
- }
-
- /* If no stack register reference exists in this insn, there isn't
- anything to convert. */
+ int i;
+ int max_uid;
+ block_info bi;
- if (! stack_reg_seen)
+ /* Clean up previous run. */
+ if (stack_regs_mentioned_data)
{
VARRAY_FREE (stack_regs_mentioned_data);
- return;
+ stack_regs_mentioned_data = 0;
}
- /* If there are stack registers, there must be at least one block. */
+ if (!optimize)
+ split_all_insns (0);
- if (! blocks)
- abort ();
-
- /* Allocate some tables that last till end of compiling this function
- and some needed only in find_blocks and life_analysis. */
+ /* See if there is something to do. Flow analysis is quite
+ expensive so we might save some compilation time. */
+ for (i = FIRST_STACK_REG; i <= LAST_STACK_REG; i++)
+ if (regs_ever_live[i])
+ break;
+ if (i > LAST_STACK_REG)
+ return;
- block_begin = (rtx *) alloca (blocks * sizeof (rtx));
- block_end = (rtx *) alloca (blocks * sizeof (rtx));
- block_drops_in = (char *) alloca (blocks);
+ /* Ok, floating point instructions exist. If not optimizing,
+ build the CFG and run life analysis. */
+ if (!optimize)
+ find_basic_blocks (first, max_reg_num (), file);
+ count_or_remove_death_notes (NULL, 1);
+ life_analysis (first, file, PROP_DEATH_NOTES);
+ mark_dfs_back_edges ();
+
+ /* Set up block info for each basic block. */
+ bi = (block_info) xcalloc ((n_basic_blocks + 1), sizeof (*bi));
+ for (i = n_basic_blocks - 1; i >= 0; --i)
+ {
+ edge e;
+ basic_block bb = BASIC_BLOCK (i);
+ bb->aux = bi + i;
+ for (e = bb->pred; e; e=e->pred_next)
+ if (!(e->flags & EDGE_DFS_BACK)
+ && e->src != ENTRY_BLOCK_PTR)
+ BLOCK_INFO (bb)->predecesors++;
+ }
+ EXIT_BLOCK_PTR->aux = bi + n_basic_blocks;
- block_stack_in = (stack) alloca (blocks * sizeof (struct stack_def));
- block_out_reg_set = (HARD_REG_SET *) alloca (blocks * sizeof (HARD_REG_SET));
- bzero ((char *) block_stack_in, blocks * sizeof (struct stack_def));
- bzero ((char *) block_out_reg_set, blocks * sizeof (HARD_REG_SET));
+ /* Create the replacement registers up front. */
+ for (i = FIRST_STACK_REG; i <= LAST_STACK_REG; i++)
+ {
+ enum machine_mode mode;
+ for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT);
+ mode != VOIDmode;
+ mode = GET_MODE_WIDER_MODE (mode))
+ FP_MODE_REG (i, mode) = gen_rtx_REG (mode, i);
+ for (mode = GET_CLASS_NARROWEST_MODE (MODE_COMPLEX_FLOAT);
+ mode != VOIDmode;
+ mode = GET_MODE_WIDER_MODE (mode))
+ FP_MODE_REG (i, mode) = gen_rtx_REG (mode, i);
+ }
- block_number = (int *) alloca ((max_uid + 1) * sizeof (int));
+ ix86_flags_rtx = gen_rtx_REG (CCmode, FLAGS_REG);
- find_blocks (first);
- stack_reg_life_analysis (first, &stackentry);
+ /* A QNaN for initializing uninitialized variables.
- /* Dump the life analysis debug information before jump
- optimization, as that will destroy the LABEL_REFS we keep the
- information in. */
+ ??? We can't load from constant memory in PIC mode, because
+ we're insertting these instructions before the prologue and
+ the PIC register hasn't been set up. In that case, fall back
+ on zero, which we can get from `ldz'. */
- if (file)
- dump_stack_info (file);
+ if (flag_pic)
+ nan = CONST0_RTX (SFmode);
+ else
+ {
+ nan = gen_lowpart (SFmode, GEN_INT (0x7fc00000));
+ nan = force_const_mem (SFmode, nan);
+ }
- convert_regs ();
+ /* Allocate a cache for stack_regs_mentioned. */
+ max_uid = get_max_uid ();
+ VARRAY_CHAR_INIT (stack_regs_mentioned_data, max_uid + 1,
+ "stack_regs_mentioned cache");
- if (optimize)
- jump_optimize (first, 2, 0, 0);
+ convert_regs (file);
- VARRAY_FREE (stack_regs_mentioned_data);
+ free (bi);
}
\f
/* Check PAT, which is in INSN, for LABEL_REFs. Add INSN to the
rtx subreg;
if (FP_REG_P (subreg = SUBREG_REG (*pat)))
{
- *pat = FP_MODE_REG (REGNO (subreg) + SUBREG_WORD (*pat),
+ int regno_off = subreg_regno_offset (REGNO (subreg),
+ GET_MODE (subreg),
+ SUBREG_BYTE (*pat),
+ GET_MODE (*pat));
+ *pat = FP_MODE_REG (REGNO (subreg) + regno_off,
GET_MODE (subreg));
default:
return pat;
}
}
\f
-/* Record the life info of each stack reg in INSN, updating REGSTACK.
- N_INPUTS is the number of inputs; N_OUTPUTS the outputs.
-
- There are many rules that an asm statement for stack-like regs must
+/* There are many rules that an asm statement for stack-like regs must
follow. Those rules are explained at the top of this file: the rule
numbers below refer to that explanation. */
-static void
-record_asm_reg_life (insn, regstack)
+static int
+check_asm_stack_operands (insn)
rtx insn;
- stack regstack;
{
int i;
int n_clobbers;
int malformed_asm = 0;
rtx body = PATTERN (insn);
- int reg_used_as_output[FIRST_PSEUDO_REGISTER];
- int implicitly_dies[FIRST_PSEUDO_REGISTER];
+ char reg_used_as_output[FIRST_PSEUDO_REGISTER];
+ char implicitly_dies[FIRST_PSEUDO_REGISTER];
int alt;
- rtx *clobber_reg;
+ rtx *clobber_reg = 0;
int n_inputs, n_outputs;
/* Find out what the constraints require. If no constraint
malformed_asm = 1;
/* Avoid further trouble with this insn. */
PATTERN (insn) = gen_rtx_USE (VOIDmode, const0_rtx);
- PUT_MODE (insn, VOIDmode);
- return;
+ return 0;
}
/* Strip SUBREGs here to make the following code simpler. */
Also enforce rule #5: Output operands must start at the top of
the reg-stack: output operands may not "skip" a reg. */
- bzero ((char *) reg_used_as_output, sizeof (reg_used_as_output));
+ memset (reg_used_as_output, 0, sizeof (reg_used_as_output));
for (i = 0; i < n_outputs; i++)
if (STACK_REG_P (recog_data.operand[i]))
{
malformed_asm = 1;
}
else
- reg_used_as_output[REGNO (recog_data.operand[i])] = 1;
+ {
+ int j;
+
+ for (j = 0; j < n_clobbers; j++)
+ if (REGNO (recog_data.operand[i]) == REGNO (clobber_reg[j]))
+ {
+ error_for_asm (insn, "Output constraint %d cannot be specified together with \"%s\" clobber",
+ i, reg_names [REGNO (clobber_reg[j])]);
+ malformed_asm = 1;
+ break;
+ }
+ if (j == n_clobbers)
+ reg_used_as_output[REGNO (recog_data.operand[i])] = 1;
+ }
}
to the top of the reg-stack than any input that is not implicitly
popped. */
- bzero ((char *) implicitly_dies, sizeof (implicitly_dies));
+ memset (implicitly_dies, 0, sizeof (implicitly_dies));
for (i = n_outputs; i < n_outputs + n_inputs; i++)
if (STACK_REG_P (recog_data.operand[i]))
{
/* Enfore rule #3: If any input operand uses the "f" constraint, all
output constraints must use the "&" earlyclobber.
- ??? Detect this more deterministically by having constraint_asm_operands
+ ??? Detect this more deterministically by having constrain_asm_operands
record any earlyclobber. */
for (i = n_outputs; i < n_outputs + n_inputs; i++)
{
/* Avoid further trouble with this insn. */
PATTERN (insn) = gen_rtx_USE (VOIDmode, const0_rtx);
- VARRAY_CHAR (stack_regs_mentioned_data, INSN_UID (insn)) = 2;
- return;
- }
-
- /* Process all outputs */
- for (i = 0; i < n_outputs; i++)
- {
- rtx op = recog_data.operand[i];
-
- if (! STACK_REG_P (op))
- {
- if (stack_regs_mentioned_p (op))
- abort ();
- else
- continue;
- }
-
- /* Each destination is dead before this insn. If the
- destination is not used after this insn, record this with
- REG_UNUSED. */
-
- if (! TEST_HARD_REG_BIT (regstack->reg_set, REGNO (op)))
- REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_UNUSED, op,
- REG_NOTES (insn));
-
- CLEAR_HARD_REG_BIT (regstack->reg_set, REGNO (op));
+ return 0;
}
- /* Process all inputs */
- for (i = n_outputs; i < n_outputs + n_inputs; i++)
- {
- rtx op = recog_data.operand[i];
- if (! STACK_REG_P (op))
- {
- if (stack_regs_mentioned_p (op))
- abort ();
- else
- continue;
- }
-
- /* If an input is dead after the insn, record a death note.
- But don't record a death note if there is already a death note,
- or if the input is also an output. */
-
- if (! TEST_HARD_REG_BIT (regstack->reg_set, REGNO (op))
- && recog_op_alt[i][alt].matches == -1
- && find_regno_note (insn, REG_DEAD, REGNO (op)) == NULL_RTX)
- REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_DEAD, op, REG_NOTES (insn));
-
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (op));
- }
-}
-
-/* Scan PAT, which is part of INSN, and record registers appearing in
- a SET_DEST in DEST, and other registers in SRC.
-
- This function does not know about SET_DESTs that are both input and
- output (such as ZERO_EXTRACT) - this cannot happen on a 387. */
-
-static void
-record_reg_life_pat (pat, src, dest, douse)
- rtx pat;
- HARD_REG_SET *src, *dest;
- int douse;
-{
- register const char *fmt;
- register int i;
-
- if (STACK_REG_P (pat)
- || (GET_CODE (pat) == SUBREG && STACK_REG_P (SUBREG_REG (pat))))
- {
- if (src)
- mark_regs_pat (pat, src);
-
- if (dest)
- mark_regs_pat (pat, dest);
-
- return;
- }
-
- if (GET_CODE (pat) == SET)
- {
- record_reg_life_pat (XEXP (pat, 0), NULL_PTR, dest, 0);
- record_reg_life_pat (XEXP (pat, 1), src, NULL_PTR, 0);
- return;
- }
-
- /* We don't need to consider either of these cases. */
- if ((GET_CODE (pat) == USE && !douse) || GET_CODE (pat) == CLOBBER)
- return;
-
- fmt = GET_RTX_FORMAT (GET_CODE (pat));
- for (i = GET_RTX_LENGTH (GET_CODE (pat)) - 1; i >= 0; i--)
- {
- if (fmt[i] == 'E')
- {
- register int j;
-
- for (j = XVECLEN (pat, i) - 1; j >= 0; j--)
- record_reg_life_pat (XVECEXP (pat, i, j), src, dest, 0);
- }
- else if (fmt[i] == 'e')
- record_reg_life_pat (XEXP (pat, i), src, dest, 0);
- }
+ return 1;
}
\f
/* Calculate the number of inputs and outputs in BODY, an
abort ();
}
-\f
-/* Scan INSN, which is in BLOCK, and record the life & death of stack
- registers in REGSTACK. This function is called to process insns from
- the last insn in a block to the first. The actual scanning is done in
- record_reg_life_pat.
-
- If a register is live after a CALL_INSN, but is not a value return
- register for that CALL_INSN, then code is emitted to initialize that
- register. The block_end[] data is kept accurate.
-
- Existing death and unset notes for stack registers are deleted
- before processing the insn. */
-
-static void
-record_reg_life (insn, block, regstack)
- rtx insn;
- int block;
- stack regstack;
-{
- rtx note, *note_link;
- int n_operands;
-
- if ((GET_CODE (insn) != INSN && GET_CODE (insn) != CALL_INSN)
- || INSN_DELETED_P (insn))
- return;
-
- /* Strip death notes for stack regs from this insn */
-
- note_link = ®_NOTES(insn);
- for (note = *note_link; note; note = XEXP (note, 1))
- if (STACK_REG_P (XEXP (note, 0))
- && (REG_NOTE_KIND (note) == REG_DEAD
- || REG_NOTE_KIND (note) == REG_UNUSED))
- *note_link = XEXP (note, 1);
- else
- note_link = &XEXP (note, 1);
-
- /* Process all patterns in the insn. */
-
- n_operands = asm_noperands (PATTERN (insn));
- if (n_operands >= 0)
- {
- record_asm_reg_life (insn, regstack);
- return;
- }
-
- {
- HARD_REG_SET src, dest;
- int regno;
-
- CLEAR_HARD_REG_SET (src);
- CLEAR_HARD_REG_SET (dest);
-
- if (GET_CODE (insn) == CALL_INSN)
- for (note = CALL_INSN_FUNCTION_USAGE (insn);
- note;
- note = XEXP (note, 1))
- if (GET_CODE (XEXP (note, 0)) == USE)
- record_reg_life_pat (SET_DEST (XEXP (note, 0)), &src, NULL_PTR, 0);
-
- record_reg_life_pat (PATTERN (insn), &src, &dest, 0);
- for (regno = FIRST_STACK_REG; regno <= LAST_STACK_REG; regno++)
- if (! TEST_HARD_REG_BIT (regstack->reg_set, regno))
- {
- if (TEST_HARD_REG_BIT (src, regno)
- && ! TEST_HARD_REG_BIT (dest, regno))
- REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_DEAD,
- FP_MODE_REG (regno, DFmode),
- REG_NOTES (insn));
- else if (TEST_HARD_REG_BIT (dest, regno))
- REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_UNUSED,
- FP_MODE_REG (regno, DFmode),
- REG_NOTES (insn));
- }
-
- if (GET_CODE (insn) == CALL_INSN)
- {
- int reg;
-
- /* There might be a reg that is live after a function call.
- Initialize it to zero so that the program does not crash. See
- comment towards the end of stack_reg_life_analysis(). */
-
- for (reg = FIRST_STACK_REG; reg <= LAST_STACK_REG; reg++)
- if (! TEST_HARD_REG_BIT (dest, reg)
- && TEST_HARD_REG_BIT (regstack->reg_set, reg))
- {
- rtx init, pat;
-
- /* The insn will use virtual register numbers, and so
- convert_regs is expected to process these. But BLOCK_NUM
- cannot be used on these insns, because they do not appear in
- block_number[]. */
-
- pat = gen_rtx_SET (VOIDmode, FP_MODE_REG (reg, DFmode),
- CONST0_RTX (DFmode));
- init = emit_insn_after (pat, insn);
-
- CLEAR_HARD_REG_BIT (regstack->reg_set, reg);
-
- /* If the CALL_INSN was the end of a block, move the
- block_end to point to the new insn. */
-
- if (block_end[block] == insn)
- block_end[block] = init;
- }
-
- /* Some regs do not survive a CALL */
- AND_COMPL_HARD_REG_SET (regstack->reg_set, call_used_reg_set);
- }
-
- AND_COMPL_HARD_REG_SET (regstack->reg_set, dest);
- IOR_HARD_REG_SET (regstack->reg_set, src);
- }
-}
-\f
-/* Find all basic blocks of the function, which starts with FIRST.
- For each JUMP_INSN, build the chain of LABEL_REFS on each CODE_LABEL. */
-
-static void
-find_blocks (first)
- rtx first;
-{
- register rtx insn;
- register int block;
- register RTX_CODE prev_code = BARRIER;
- register RTX_CODE code;
- rtx label_value_list = 0;
-
- /* Record where all the blocks start and end.
- Record which basic blocks control can drop in to. */
-
- block = -1;
- for (insn = first; insn; insn = NEXT_INSN (insn))
- {
- /* Note that this loop must select the same block boundaries
- as code in reg_to_stack, but that these are not the same
- as those selected in flow.c. */
-
- code = GET_CODE (insn);
-
- if (code == CODE_LABEL
- || (prev_code != INSN
- && prev_code != CALL_INSN
- && prev_code != CODE_LABEL
- && GET_RTX_CLASS (code) == 'i'))
- {
- block_begin[++block] = insn;
- block_end[block] = insn;
- block_drops_in[block] = prev_code != BARRIER;
- }
- else if (GET_RTX_CLASS (code) == 'i')
- block_end[block] = insn;
-
- if (GET_RTX_CLASS (code) == 'i')
- {
- rtx note;
-
- /* Make a list of all labels referred to other than by jumps. */
- for (note = REG_NOTES (insn); note; note = XEXP (note, 1))
- if (REG_NOTE_KIND (note) == REG_LABEL)
- label_value_list = gen_rtx_EXPR_LIST (VOIDmode, XEXP (note, 0),
- label_value_list);
- }
-
- block_number[INSN_UID (insn)] = block;
-
- if (code != NOTE)
- prev_code = code;
- }
-
- if (block + 1 != blocks)
- abort ();
-
- /* generate all label references to the corresponding jump insn */
- for (block = 0; block < blocks; block++)
- {
- insn = block_end[block];
-
- if (GET_CODE (insn) == JUMP_INSN)
- {
- rtx pat = PATTERN (insn);
- rtx x;
-
- if (computed_jump_p (insn))
- {
- for (x = label_value_list; x; x = XEXP (x, 1))
- record_label_references (insn,
- gen_rtx_LABEL_REF (VOIDmode,
- XEXP (x, 0)));
-
- for (x = forced_labels; x; x = XEXP (x, 1))
- record_label_references (insn,
- gen_rtx_LABEL_REF (VOIDmode,
- XEXP (x, 0)));
- }
-
- record_label_references (insn, pat);
- }
- }
-}
/* If current function returns its result in an fp stack register,
return the REG. Otherwise, return 0. */
stack_result (decl)
tree decl;
{
- rtx result = DECL_RTL (DECL_RESULT (decl));
+ rtx result;
- if (result != 0
- && ! (GET_CODE (result) == REG
- && REGNO (result) < FIRST_PSEUDO_REGISTER))
+ /* If the value is supposed to be returned in memory, then clearly
+ it is not returned in a stack register. */
+ if (aggregate_value_p (DECL_RESULT (decl)))
+ return 0;
+
+ result = DECL_RTL_IF_SET (DECL_RESULT (decl));
+ if (result != 0)
{
#ifdef FUNCTION_OUTGOING_VALUE
result
return result != 0 && STACK_REG_P (result) ? result : 0;
}
\f
-/* Determine the which registers are live at the start of each basic
- block of the function whose first insn is FIRST.
-
- First, if the function returns a real_type, mark the function
- return type as live at each return point, as the RTL may not give any
- hint that the register is live.
-
- Then, start with the last block and work back to the first block.
- Similarly, work backwards within each block, insn by insn, recording
- which regs are dead and which are used (and therefore live) in the
- hard reg set of block_stack_in[].
-
- After processing each basic block, if there is a label at the start
- of the block, propagate the live registers to all jumps to this block.
-
- As a special case, if there are regs live in this block, that are
- not live in a block containing a jump to this label, and the block
- containing the jump has already been processed, we must propagate this
- block's entry register life back to the block containing the jump, and
- restart life analysis from there.
-
- In the worst case, this function may traverse the insns
- REG_STACK_SIZE times. This is necessary, since a jump towards the end
- of the insns may not know that a reg is live at a target that is early
- in the insns. So we back up and start over with the new reg live.
-
- If there are registers that are live at the start of the function,
- insns are emitted to initialize these registers. Something similar is
- done after CALL_INSNs in record_reg_life. */
-
-static void
-stack_reg_life_analysis (first, stackentry)
- rtx first;
- HARD_REG_SET *stackentry;
-{
- int reg, block;
- struct stack_def regstack;
-
- {
- rtx retvalue;
-
- if ((retvalue = stack_result (current_function_decl)))
- {
- /* Find all RETURN insns and mark them. */
- for (block = blocks - 1; --block >= 0;)
- if (GET_CODE (block_end[block]) == JUMP_INSN
- && returnjump_p (block_end[block]))
- mark_regs_pat (retvalue, block_out_reg_set+block);
-
- /* Mark off the end of last block if we "fall off" the end of the
- function into the epilogue. */
-
- if (GET_CODE (block_end[blocks-1]) != JUMP_INSN
- || GET_CODE (PATTERN (block_end[blocks-1])) == RETURN)
- mark_regs_pat (retvalue, block_out_reg_set+blocks-1);
- }
- }
-
- /* now scan all blocks backward for stack register use */
-
- block = blocks - 1;
- while (block >= 0)
- {
- register rtx insn, prev;
-
- /* current register status at last instruction */
-
- COPY_HARD_REG_SET (regstack.reg_set, block_out_reg_set[block]);
-
- prev = block_end[block];
- do
- {
- insn = prev;
- prev = PREV_INSN (insn);
-
- /* If the insn is a CALL_INSN, we need to ensure that
- everything dies. But otherwise don't process unless there
- are some stack regs present. */
-
- if (stack_regs_mentioned (insn) || GET_CODE (insn) == CALL_INSN)
- record_reg_life (insn, block, ®stack);
-
- } while (insn != block_begin[block]);
-
- /* Set the state at the start of the block. Mark that no
- register mapping information known yet. */
-
- COPY_HARD_REG_SET (block_stack_in[block].reg_set, regstack.reg_set);
- block_stack_in[block].top = -2;
-
- /* If there is a label, propagate our register life to all jumps
- to this label. */
-
- if (GET_CODE (insn) == CODE_LABEL)
- {
- register rtx label;
- int must_restart = 0;
-
- for (label = LABEL_REFS (insn); label != insn;
- label = LABEL_NEXTREF (label))
- {
- int jump_block = BLOCK_NUM (CONTAINING_INSN (label));
-
- if (jump_block < block)
- IOR_HARD_REG_SET (block_out_reg_set[jump_block],
- block_stack_in[block].reg_set);
- else
- {
- /* The block containing the jump has already been
- processed. If there are registers that were not known
- to be live then, but are live now, we must back up
- and restart life analysis from that point with the new
- life information. */
-
- GO_IF_HARD_REG_SUBSET (block_stack_in[block].reg_set,
- block_out_reg_set[jump_block],
- win);
-
- IOR_HARD_REG_SET (block_out_reg_set[jump_block],
- block_stack_in[block].reg_set);
-
- block = jump_block;
- must_restart = 1;
- break;
-
- win:
- ;
- }
- }
- if (must_restart)
- continue;
- }
-
- if (block_drops_in[block])
- IOR_HARD_REG_SET (block_out_reg_set[block-1],
- block_stack_in[block].reg_set);
-
- block -= 1;
- }
-
- /* If any reg is live at the start of the first block of a
- function, then we must guarantee that the reg holds some value by
- generating our own "load" of that register. Otherwise a 387 would
- fault trying to access an empty register. */
-
- /* Load zero into each live register. The fact that a register
- appears live at the function start necessarily implies an error
- in the user program: it means that (unless the offending code is *never*
- executed) this program is using uninitialised floating point
- variables. In order to keep broken code like this happy, we initialise
- those variables with zero.
-
- Note that we are inserting virtual register references here:
- these insns must be processed by convert_regs later. Also, these
- insns will not be in block_number, so BLOCK_NUM() will fail for them. */
-
- for (reg = LAST_STACK_REG; reg >= FIRST_STACK_REG; reg--)
- if (TEST_HARD_REG_BIT (block_stack_in[0].reg_set, reg)
- && ! TEST_HARD_REG_BIT (*stackentry, reg))
- {
- rtx init_rtx;
-
- init_rtx = gen_rtx_SET (VOIDmode, FP_MODE_REG(reg, DFmode),
- CONST0_RTX (DFmode));
- block_begin[0] = emit_insn_after (init_rtx, first);
-
- CLEAR_HARD_REG_BIT (block_stack_in[0].reg_set, reg);
- }
-}
-\f
/*
* This section deals with stack register substitution, and forms the second
* pass over the RTL.
remove_regno_note (insn, note, regno)
rtx insn;
enum reg_note note;
- int regno;
+ unsigned int regno;
{
register rtx *note_link, this;
cases the movdf pattern to pop. */
static rtx
-emit_pop_insn (insn, regstack, reg, when)
+emit_pop_insn (insn, regstack, reg, where)
rtx insn;
stack regstack;
rtx reg;
- rtx (*when)();
+ enum emit_where where;
{
rtx pop_insn, pop_rtx;
int hard_regno;
+ /* For complex types take care to pop both halves. These may survive in
+ CLOBBER and USE expressions. */
+ if (COMPLEX_MODE_P (GET_MODE (reg)))
+ {
+ rtx reg1 = FP_MODE_REG (REGNO (reg), DFmode);
+ rtx reg2 = FP_MODE_REG (REGNO (reg) + 1, DFmode);
+
+ pop_insn = NULL_RTX;
+ if (get_hard_regnum (regstack, reg1) >= 0)
+ pop_insn = emit_pop_insn (insn, regstack, reg1, where);
+ if (get_hard_regnum (regstack, reg2) >= 0)
+ pop_insn = emit_pop_insn (insn, regstack, reg2, where);
+ if (!pop_insn)
+ abort ();
+ return pop_insn;
+ }
+
hard_regno = get_hard_regnum (regstack, reg);
if (hard_regno < FIRST_STACK_REG)
pop_rtx = gen_rtx_SET (VOIDmode, FP_MODE_REG (hard_regno, DFmode),
FP_MODE_REG (FIRST_STACK_REG, DFmode));
- pop_insn = (*when) (pop_rtx, insn);
+ if (where == EMIT_AFTER)
+ pop_insn = emit_block_insn_after (pop_rtx, insn, current_block);
+ else
+ pop_insn = emit_block_insn_before (pop_rtx, insn, current_block);
REG_NOTES (pop_insn)
= gen_rtx_EXPR_LIST (REG_DEAD, FP_MODE_REG (FIRST_STACK_REG, DFmode),
return pop_insn;
}
\f
-/* Emit an insn before or after INSN to swap virtual register REG with the
- top of stack. WHEN should be `emit_insn_before' or `emit_insn_before'
- REGSTACK is the stack state before the swap, and is updated to reflect
- the swap. A swap insn is represented as a PARALLEL of two patterns:
- each pattern moves one reg to the other.
+/* Emit an insn before or after INSN to swap virtual register REG with
+ the top of stack. REGSTACK is the stack state before the swap, and
+ is updated to reflect the swap. A swap insn is represented as a
+ PARALLEL of two patterns: each pattern moves one reg to the other.
If REG is already at the top of the stack, no insn is emitted. */
rtx reg;
{
int hard_regno;
- rtx swap_rtx, swap_insn;
+ rtx swap_rtx;
int tmp, other_reg; /* swap regno temps */
rtx i1; /* the stack-reg insn prior to INSN */
rtx i1set = NULL_RTX; /* the SET rtx within I1 */
regstack->reg[other_reg] = regstack->reg[regstack->top];
regstack->reg[regstack->top] = tmp;
- /* Find the previous insn involving stack regs, but don't go past
- any labels, calls or jumps. */
- i1 = prev_nonnote_insn (insn);
- while (i1 && GET_CODE (i1) == INSN && !stack_regs_mentioned (i1))
- i1 = prev_nonnote_insn (i1);
-
- if (i1)
- i1set = single_set (i1);
+ /* Find the previous insn involving stack regs, but don't pass a
+ block boundary. */
+ i1 = NULL;
+ if (current_block && insn != current_block->head)
+ {
+ rtx tmp = PREV_INSN (insn);
+ rtx limit = PREV_INSN (current_block->head);
+ while (tmp != limit)
+ {
+ if (GET_CODE (tmp) == CODE_LABEL
+ || GET_CODE (tmp) == CALL_INSN
+ || NOTE_INSN_BASIC_BLOCK_P (tmp)
+ || (GET_CODE (tmp) == INSN
+ && stack_regs_mentioned (tmp)))
+ {
+ i1 = tmp;
+ break;
+ }
+ tmp = PREV_INSN (tmp);
+ }
+ }
- if (i1set)
+ if (i1 != NULL_RTX
+ && (i1set = single_set (i1)) != NULL_RTX)
{
rtx i1src = *get_true_reg (&SET_SRC (i1set));
rtx i1dest = *get_true_reg (&SET_DEST (i1set));
swap with, omit the swap. */
if (GET_CODE (i1dest) == REG && REGNO (i1dest) == FIRST_STACK_REG
- && GET_CODE (i1src) == REG && REGNO (i1src) == hard_regno - 1
+ && GET_CODE (i1src) == REG
+ && REGNO (i1src) == (unsigned) hard_regno - 1
&& find_regno_note (i1, REG_DEAD, FIRST_STACK_REG) == NULL_RTX)
return;
/* If the previous insn wrote to the reg we are to swap with,
omit the swap. */
- if (GET_CODE (i1dest) == REG && REGNO (i1dest) == hard_regno
+ if (GET_CODE (i1dest) == REG && REGNO (i1dest) == (unsigned) hard_regno
&& GET_CODE (i1src) == REG && REGNO (i1src) == FIRST_STACK_REG
&& find_regno_note (i1, REG_DEAD, FIRST_STACK_REG) == NULL_RTX)
return;
swap_rtx = gen_swapxf (FP_MODE_REG (hard_regno, XFmode),
FP_MODE_REG (FIRST_STACK_REG, XFmode));
- swap_insn = emit_insn_after (swap_rtx, i1);
+
+ if (i1)
+ emit_block_insn_after (swap_rtx, i1, current_block);
+ else if (current_block)
+ emit_block_insn_before (swap_rtx, current_block->head, current_block);
+ else
+ emit_insn_before (swap_rtx, insn);
}
\f
/* Handle a move to or from a stack register in PAT, which is in INSN.
if (find_regno_note (insn, REG_UNUSED, REGNO (dest)))
{
- emit_pop_insn (insn, regstack, src, emit_insn_after);
+ emit_pop_insn (insn, regstack, src, EMIT_AFTER);
delete_insn_for_stacker (insn);
return;
if (REGNO (src) == REGNO (dest))
{
if (find_regno_note (insn, REG_UNUSED, REGNO (dest)))
- emit_pop_insn (insn, regstack, dest, emit_insn_after);
+ emit_pop_insn (insn, regstack, dest, EMIT_AFTER);
delete_insn_for_stacker (insn);
return;
regstack->top--;
CLEAR_HARD_REG_BIT (regstack->reg_set, REGNO (src));
}
- else if (GET_MODE (src) == XFmode && regstack->top < REG_STACK_SIZE - 1)
+ else if ((GET_MODE (src) == XFmode || GET_MODE (src) == TFmode)
+ && regstack->top < REG_STACK_SIZE - 1)
{
/* A 387 cannot write an XFmode value to a MEM without
clobbering the source reg. The output code can handle
stack is not full, and then write the value to memory via
a pop. */
rtx push_rtx, push_insn;
- rtx top_stack_reg = FP_MODE_REG (FIRST_STACK_REG, XFmode);
+ rtx top_stack_reg = FP_MODE_REG (FIRST_STACK_REG, GET_MODE (src));
- push_rtx = gen_movxf (top_stack_reg, top_stack_reg);
+ if (GET_MODE (src) == TFmode)
+ push_rtx = gen_movtf (top_stack_reg, top_stack_reg);
+ else
+ push_rtx = gen_movxf (top_stack_reg, top_stack_reg);
push_insn = emit_insn_before (push_rtx, insn);
REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_DEAD, top_stack_reg,
REG_NOTES (insn));
\f
/* Swap the condition on a branch, if there is one. Return true if we
found a condition to swap. False if the condition was not used as
- such. */
+ such. */
static int
swap_rtx_condition_1 (pat)
/* Search forward looking for the first use of this value.
Stop at block boundaries. */
- /* ??? This really cries for BLOCK_END! */
- while (1)
+ while (insn != current_block->end)
{
insn = NEXT_INSN (insn);
- if (insn == NULL_RTX)
- return 0;
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i'
- && reg_mentioned_p (dest, insn))
+ if (INSN_P (insn) && reg_mentioned_p (dest, insn))
break;
- if (GET_CODE (insn) == JUMP_INSN)
- return 0;
- if (GET_CODE (insn) == CODE_LABEL)
+ if (GET_CODE (insn) == CALL_INSN)
return 0;
}
pat = PATTERN (insn);
}
- return swap_rtx_condition_1 (pat);
+ if (swap_rtx_condition_1 (pat))
+ {
+ int fail = 0;
+ INSN_CODE (insn) = -1;
+ if (recog_memoized (insn) == -1)
+ fail = 1;
+ /* In case the flags don't die here, recurse to try fix
+ following user too. */
+ else if (! dead_or_set_p (insn, ix86_flags_rtx))
+ {
+ insn = next_flags_user (insn);
+ if (!insn || !swap_rtx_condition (insn))
+ fail = 1;
+ }
+ if (fail)
+ {
+ swap_rtx_condition_1 (pat);
+ return 0;
+ }
+ return 1;
+ }
+ return 0;
}
/* Handle a comparison. Special care needs to be taken to avoid
remove_regno_note (insn, REG_DEAD, REGNO (XEXP (src2_note, 0)));
emit_pop_insn (insn, regstack, XEXP (src2_note, 0),
- emit_insn_after);
+ EMIT_AFTER);
}
}
}
rtx pat;
{
rtx *dest, *src;
- rtx *src1 = (rtx *) NULL_PTR, *src2;
- rtx src1_note, src2_note;
- rtx pat_src;
- if (GET_CODE (pat) != SET)
- return;
+ switch (GET_CODE (pat))
+ {
+ case USE:
+ /* Deaths in USE insns can happen in non optimizing compilation.
+ Handle them by popping the dying register. */
+ src = get_true_reg (&XEXP (pat, 0));
+ if (STACK_REG_P (*src)
+ && find_regno_note (insn, REG_DEAD, REGNO (*src)))
+ {
+ emit_pop_insn (insn, regstack, *src, EMIT_AFTER);
+ return;
+ }
+ /* ??? Uninitialized USE should not happen. */
+ else if (get_hard_regnum (regstack, *src) == -1)
+ abort();
+ break;
- dest = get_true_reg (&SET_DEST (pat));
- src = get_true_reg (&SET_SRC (pat));
- pat_src = SET_SRC (pat);
+ case CLOBBER:
+ {
+ rtx note;
- /* See if this is a `movM' pattern, and handle elsewhere if so. */
+ dest = get_true_reg (&XEXP (pat, 0));
+ if (STACK_REG_P (*dest))
+ {
+ note = find_reg_note (insn, REG_DEAD, *dest);
- if (*dest != cc0_rtx
- && (STACK_REG_P (*src)
- || (STACK_REG_P (*dest)
- && (GET_CODE (*src) == REG || GET_CODE (*src) == MEM
- || GET_CODE (*src) == CONST_DOUBLE))))
- move_for_stack_reg (insn, regstack, pat);
- else
- switch (GET_CODE (pat_src))
- {
- case COMPARE:
- compare_for_stack_reg (insn, regstack, pat_src);
- break;
+ if (pat != PATTERN (insn))
+ {
+ /* The fix_truncdi_1 pattern wants to be able to allocate
+ it's own scratch register. It does this by clobbering
+ an fp reg so that it is assured of an empty reg-stack
+ register. If the register is live, kill it now.
+ Remove the DEAD/UNUSED note so we don't try to kill it
+ later too. */
+
+ if (note)
+ emit_pop_insn (insn, regstack, *dest, EMIT_BEFORE);
+ else
+ {
+ note = find_reg_note (insn, REG_UNUSED, *dest);
+ if (!note)
+ abort ();
+ }
+ remove_note (insn, note);
+ replace_reg (dest, LAST_STACK_REG);
+ }
+ else
+ {
+ /* A top-level clobber with no REG_DEAD, and no hard-regnum
+ indicates an uninitialized value. Because reload removed
+ all other clobbers, this must be due to a function
+ returning without a value. Load up a NaN. */
- case CALL:
- {
- int count;
- for (count = HARD_REGNO_NREGS (REGNO (*dest), GET_MODE (*dest));
- --count >= 0;)
- {
- regstack->reg[++regstack->top] = REGNO (*dest) + count;
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest) + count);
- }
- }
- replace_reg (dest, FIRST_STACK_REG);
+ if (! note
+ && get_hard_regnum (regstack, *dest) == -1)
+ {
+ pat = gen_rtx_SET (VOIDmode,
+ FP_MODE_REG (REGNO (*dest), SFmode),
+ nan);
+ PATTERN (insn) = pat;
+ move_for_stack_reg (insn, regstack, pat);
+ }
+ if (! note && COMPLEX_MODE_P (GET_MODE (*dest))
+ && get_hard_regnum (regstack, FP_MODE_REG (REGNO (*dest), DFmode)) == -1)
+ {
+ pat = gen_rtx_SET (VOIDmode,
+ FP_MODE_REG (REGNO (*dest) + 1, SFmode),
+ nan);
+ PATTERN (insn) = pat;
+ move_for_stack_reg (insn, regstack, pat);
+ }
+ }
+ }
break;
+ }
- case REG:
- /* This is a `tstM2' case. */
- if (*dest != cc0_rtx)
- abort ();
+ case SET:
+ {
+ rtx *src1 = (rtx *) 0, *src2;
+ rtx src1_note, src2_note;
+ rtx pat_src;
+
+ dest = get_true_reg (&SET_DEST (pat));
+ src = get_true_reg (&SET_SRC (pat));
+ pat_src = SET_SRC (pat);
+
+ /* See if this is a `movM' pattern, and handle elsewhere if so. */
+ if (STACK_REG_P (*src)
+ || (STACK_REG_P (*dest)
+ && (GET_CODE (*src) == REG || GET_CODE (*src) == MEM
+ || GET_CODE (*src) == CONST_DOUBLE)))
+ {
+ move_for_stack_reg (insn, regstack, pat);
+ break;
+ }
- src1 = src;
+ switch (GET_CODE (pat_src))
+ {
+ case COMPARE:
+ compare_for_stack_reg (insn, regstack, pat_src);
+ break;
- /* Fall through. */
+ case CALL:
+ {
+ int count;
+ for (count = HARD_REGNO_NREGS (REGNO (*dest), GET_MODE (*dest));
+ --count >= 0;)
+ {
+ regstack->reg[++regstack->top] = REGNO (*dest) + count;
+ SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest) + count);
+ }
+ }
+ replace_reg (dest, FIRST_STACK_REG);
+ break;
- case FLOAT_TRUNCATE:
- case SQRT:
- case ABS:
- case NEG:
- /* These insns only operate on the top of the stack. DEST might
- be cc0_rtx if we're processing a tstM pattern. Also, it's
- possible that the tstM case results in a REG_DEAD note on the
- source. */
+ case REG:
+ /* This is a `tstM2' case. */
+ if (*dest != cc0_rtx)
+ abort ();
+ src1 = src;
- if (src1 == 0)
- src1 = get_true_reg (&XEXP (pat_src, 0));
+ /* Fall through. */
- emit_swap_insn (insn, regstack, *src1);
+ case FLOAT_TRUNCATE:
+ case SQRT:
+ case ABS:
+ case NEG:
+ /* These insns only operate on the top of the stack. DEST might
+ be cc0_rtx if we're processing a tstM pattern. Also, it's
+ possible that the tstM case results in a REG_DEAD note on the
+ source. */
- src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
+ if (src1 == 0)
+ src1 = get_true_reg (&XEXP (pat_src, 0));
- if (STACK_REG_P (*dest))
- replace_reg (dest, FIRST_STACK_REG);
+ emit_swap_insn (insn, regstack, *src1);
- if (src1_note)
- {
- replace_reg (&XEXP (src1_note, 0), FIRST_STACK_REG);
- regstack->top--;
- CLEAR_HARD_REG_BIT (regstack->reg_set, REGNO (*src1));
- }
+ src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
- replace_reg (src1, FIRST_STACK_REG);
+ if (STACK_REG_P (*dest))
+ replace_reg (dest, FIRST_STACK_REG);
- break;
+ if (src1_note)
+ {
+ replace_reg (&XEXP (src1_note, 0), FIRST_STACK_REG);
+ regstack->top--;
+ CLEAR_HARD_REG_BIT (regstack->reg_set, REGNO (*src1));
+ }
- case MINUS:
- case DIV:
- /* On i386, reversed forms of subM3 and divM3 exist for
- MODE_FLOAT, so the same code that works for addM3 and mulM3
- can be used. */
- case MULT:
- case PLUS:
- /* These insns can accept the top of stack as a destination
- from a stack reg or mem, or can use the top of stack as a
- source and some other stack register (possibly top of stack)
- as a destination. */
-
- src1 = get_true_reg (&XEXP (pat_src, 0));
- src2 = get_true_reg (&XEXP (pat_src, 1));
-
- /* We will fix any death note later. */
-
- if (STACK_REG_P (*src1))
- src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
- else
- src1_note = NULL_RTX;
- if (STACK_REG_P (*src2))
- src2_note = find_regno_note (insn, REG_DEAD, REGNO (*src2));
- else
- src2_note = NULL_RTX;
-
- /* If either operand is not a stack register, then the dest
- must be top of stack. */
-
- if (! STACK_REG_P (*src1) || ! STACK_REG_P (*src2))
- emit_swap_insn (insn, regstack, *dest);
- else
- {
- /* Both operands are REG. If neither operand is already
- at the top of stack, choose to make the one that is the dest
- the new top of stack. */
+ replace_reg (src1, FIRST_STACK_REG);
+ break;
- int src1_hard_regnum, src2_hard_regnum;
+ case MINUS:
+ case DIV:
+ /* On i386, reversed forms of subM3 and divM3 exist for
+ MODE_FLOAT, so the same code that works for addM3 and mulM3
+ can be used. */
+ case MULT:
+ case PLUS:
+ /* These insns can accept the top of stack as a destination
+ from a stack reg or mem, or can use the top of stack as a
+ source and some other stack register (possibly top of stack)
+ as a destination. */
+
+ src1 = get_true_reg (&XEXP (pat_src, 0));
+ src2 = get_true_reg (&XEXP (pat_src, 1));
+
+ /* We will fix any death note later. */
+
+ if (STACK_REG_P (*src1))
+ src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
+ else
+ src1_note = NULL_RTX;
+ if (STACK_REG_P (*src2))
+ src2_note = find_regno_note (insn, REG_DEAD, REGNO (*src2));
+ else
+ src2_note = NULL_RTX;
- src1_hard_regnum = get_hard_regnum (regstack, *src1);
- src2_hard_regnum = get_hard_regnum (regstack, *src2);
- if (src1_hard_regnum == -1 || src2_hard_regnum == -1)
- abort ();
+ /* If either operand is not a stack register, then the dest
+ must be top of stack. */
- if (src1_hard_regnum != FIRST_STACK_REG
- && src2_hard_regnum != FIRST_STACK_REG)
+ if (! STACK_REG_P (*src1) || ! STACK_REG_P (*src2))
emit_swap_insn (insn, regstack, *dest);
- }
+ else
+ {
+ /* Both operands are REG. If neither operand is already
+ at the top of stack, choose to make the one that is the dest
+ the new top of stack. */
- if (STACK_REG_P (*src1))
- replace_reg (src1, get_hard_regnum (regstack, *src1));
- if (STACK_REG_P (*src2))
- replace_reg (src2, get_hard_regnum (regstack, *src2));
+ int src1_hard_regnum, src2_hard_regnum;
- if (src1_note)
- {
- /* If the register that dies is at the top of stack, then
- the destination is somewhere else - merely substitute it.
- But if the reg that dies is not at top of stack, then
- move the top of stack to the dead reg, as though we had
- done the insn and then a store-with-pop. */
+ src1_hard_regnum = get_hard_regnum (regstack, *src1);
+ src2_hard_regnum = get_hard_regnum (regstack, *src2);
+ if (src1_hard_regnum == -1 || src2_hard_regnum == -1)
+ abort ();
- if (REGNO (XEXP (src1_note, 0)) == regstack->reg[regstack->top])
- {
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
- replace_reg (dest, get_hard_regnum (regstack, *dest));
+ if (src1_hard_regnum != FIRST_STACK_REG
+ && src2_hard_regnum != FIRST_STACK_REG)
+ emit_swap_insn (insn, regstack, *dest);
}
- else
+
+ if (STACK_REG_P (*src1))
+ replace_reg (src1, get_hard_regnum (regstack, *src1));
+ if (STACK_REG_P (*src2))
+ replace_reg (src2, get_hard_regnum (regstack, *src2));
+
+ if (src1_note)
{
- int regno = get_hard_regnum (regstack, XEXP (src1_note, 0));
+ rtx src1_reg = XEXP (src1_note, 0);
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
- replace_reg (dest, regno);
+ /* If the register that dies is at the top of stack, then
+ the destination is somewhere else - merely substitute it.
+ But if the reg that dies is not at top of stack, then
+ move the top of stack to the dead reg, as though we had
+ done the insn and then a store-with-pop. */
- regstack->reg[regstack->top - (regno - FIRST_STACK_REG)]
- = regstack->reg[regstack->top];
- }
+ if (REGNO (src1_reg) == regstack->reg[regstack->top])
+ {
+ SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
+ replace_reg (dest, get_hard_regnum (regstack, *dest));
+ }
+ else
+ {
+ int regno = get_hard_regnum (regstack, src1_reg);
- CLEAR_HARD_REG_BIT (regstack->reg_set,
- REGNO (XEXP (src1_note, 0)));
- replace_reg (&XEXP (src1_note, 0), FIRST_STACK_REG);
- regstack->top--;
- }
- else if (src2_note)
- {
- if (REGNO (XEXP (src2_note, 0)) == regstack->reg[regstack->top])
+ SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
+ replace_reg (dest, regno);
+
+ regstack->reg[regstack->top - (regno - FIRST_STACK_REG)]
+ = regstack->reg[regstack->top];
+ }
+
+ CLEAR_HARD_REG_BIT (regstack->reg_set,
+ REGNO (XEXP (src1_note, 0)));
+ replace_reg (&XEXP (src1_note, 0), FIRST_STACK_REG);
+ regstack->top--;
+ }
+ else if (src2_note)
{
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
- replace_reg (dest, get_hard_regnum (regstack, *dest));
+ rtx src2_reg = XEXP (src2_note, 0);
+ if (REGNO (src2_reg) == regstack->reg[regstack->top])
+ {
+ SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
+ replace_reg (dest, get_hard_regnum (regstack, *dest));
+ }
+ else
+ {
+ int regno = get_hard_regnum (regstack, src2_reg);
+
+ SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
+ replace_reg (dest, regno);
+
+ regstack->reg[regstack->top - (regno - FIRST_STACK_REG)]
+ = regstack->reg[regstack->top];
+ }
+
+ CLEAR_HARD_REG_BIT (regstack->reg_set,
+ REGNO (XEXP (src2_note, 0)));
+ replace_reg (&XEXP (src2_note, 0), FIRST_STACK_REG);
+ regstack->top--;
}
else
{
- int regno = get_hard_regnum (regstack, XEXP (src2_note, 0));
-
SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
- replace_reg (dest, regno);
-
- regstack->reg[regstack->top - (regno - FIRST_STACK_REG)]
- = regstack->reg[regstack->top];
+ replace_reg (dest, get_hard_regnum (regstack, *dest));
}
- CLEAR_HARD_REG_BIT (regstack->reg_set,
- REGNO (XEXP (src2_note, 0)));
- replace_reg (&XEXP (src2_note, 0), FIRST_STACK_REG);
- regstack->top--;
- }
- else
- {
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
- replace_reg (dest, get_hard_regnum (regstack, *dest));
- }
-
- break;
+ /* Keep operand 1 maching with destination. */
+ if (GET_RTX_CLASS (GET_CODE (pat_src)) == 'c'
+ && REG_P (*src1) && REG_P (*src2)
+ && REGNO (*src1) != REGNO (*dest))
+ {
+ int tmp = REGNO (*src1);
+ replace_reg (src1, REGNO (*src2));
+ replace_reg (src2, tmp);
+ }
+ break;
- case UNSPEC:
- switch (XINT (pat_src, 1))
- {
- case 1: /* sin */
- case 2: /* cos */
- /* These insns only operate on the top of the stack. */
+ case UNSPEC:
+ switch (XINT (pat_src, 1))
+ {
+ case 1: /* sin */
+ case 2: /* cos */
+ /* These insns only operate on the top of the stack. */
- src1 = get_true_reg (&XVECEXP (pat_src, 0, 0));
+ src1 = get_true_reg (&XVECEXP (pat_src, 0, 0));
- emit_swap_insn (insn, regstack, *src1);
+ emit_swap_insn (insn, regstack, *src1);
- src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
+ src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
- if (STACK_REG_P (*dest))
- replace_reg (dest, FIRST_STACK_REG);
+ if (STACK_REG_P (*dest))
+ replace_reg (dest, FIRST_STACK_REG);
- if (src1_note)
- {
- replace_reg (&XEXP (src1_note, 0), FIRST_STACK_REG);
- regstack->top--;
- CLEAR_HARD_REG_BIT (regstack->reg_set, REGNO (*src1));
- }
+ if (src1_note)
+ {
+ replace_reg (&XEXP (src1_note, 0), FIRST_STACK_REG);
+ regstack->top--;
+ CLEAR_HARD_REG_BIT (regstack->reg_set, REGNO (*src1));
+ }
- replace_reg (src1, FIRST_STACK_REG);
+ replace_reg (src1, FIRST_STACK_REG);
+ break;
- break;
+ case 10:
+ /* (unspec [(unspec [(compare ..)] 9)] 10)
+ Unspec 9 is fnstsw; unspec 10 is sahf. The combination
+ matches the PPRO fcomi instruction. */
- case 10:
- /* (unspec [(unspec [(compare ..)] 9)] 10)
- Unspec 9 is fnstsw; unspec 10 is sahf. The combination
- matches the PPRO fcomi instruction. */
+ pat_src = XVECEXP (pat_src, 0, 0);
+ if (GET_CODE (pat_src) != UNSPEC
+ || XINT (pat_src, 1) != 9)
+ abort ();
+ /* FALLTHRU */
- pat_src = XVECEXP (pat_src, 0, 0);
- if (GET_CODE (pat_src) != UNSPEC
- || XINT (pat_src, 1) != 9)
- abort ();
- /* FALLTHRU */
+ case 9:
+ /* (unspec [(compare ..)] 9) */
+ /* Combined fcomp+fnstsw generated for doing well with
+ CSE. When optimizing this would have been broken
+ up before now. */
- case 9:
- /* (unspec [(compare ..)] 9)
- Combined fcomp+fnstsw generated for doing well with CSE.
- When optimizing this would have been broken up before now. */
+ pat_src = XVECEXP (pat_src, 0, 0);
+ if (GET_CODE (pat_src) != COMPARE)
+ abort ();
- pat_src = XVECEXP (pat_src, 0, 0);
- if (GET_CODE (pat_src) != COMPARE)
- abort ();
+ compare_for_stack_reg (insn, regstack, pat_src);
+ break;
- compare_for_stack_reg (insn, regstack, pat_src);
+ default:
+ abort ();
+ }
break;
- default:
- abort ();
- }
- break;
-
- case IF_THEN_ELSE:
- /* This insn requires the top of stack to be the destination. */
+ case IF_THEN_ELSE:
+ /* This insn requires the top of stack to be the destination. */
- /* If the comparison operator is an FP comparison operator,
- it is handled correctly by compare_for_stack_reg () who
- will move the destination to the top of stack. But if the
- comparison operator is not an FP comparison operator, we
- have to handle it here. */
- if (get_hard_regnum (regstack, *dest) >= FIRST_STACK_REG
- && REGNO (*dest) != regstack->reg[regstack->top])
- emit_swap_insn (insn, regstack, *dest);
+ /* If the comparison operator is an FP comparison operator,
+ it is handled correctly by compare_for_stack_reg () who
+ will move the destination to the top of stack. But if the
+ comparison operator is not an FP comparison operator, we
+ have to handle it here. */
+ if (get_hard_regnum (regstack, *dest) >= FIRST_STACK_REG
+ && REGNO (*dest) != regstack->reg[regstack->top])
+ emit_swap_insn (insn, regstack, *dest);
- src1 = get_true_reg (&XEXP (pat_src, 1));
- src2 = get_true_reg (&XEXP (pat_src, 2));
+ src1 = get_true_reg (&XEXP (pat_src, 1));
+ src2 = get_true_reg (&XEXP (pat_src, 2));
- src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
- src2_note = find_regno_note (insn, REG_DEAD, REGNO (*src2));
+ src1_note = find_regno_note (insn, REG_DEAD, REGNO (*src1));
+ src2_note = find_regno_note (insn, REG_DEAD, REGNO (*src2));
- {
- rtx src_note [3];
- int i;
+ {
+ rtx src_note [3];
+ int i;
- src_note[0] = 0;
- src_note[1] = src1_note;
- src_note[2] = src2_note;
+ src_note[0] = 0;
+ src_note[1] = src1_note;
+ src_note[2] = src2_note;
- if (STACK_REG_P (*src1))
- replace_reg (src1, get_hard_regnum (regstack, *src1));
- if (STACK_REG_P (*src2))
- replace_reg (src2, get_hard_regnum (regstack, *src2));
+ if (STACK_REG_P (*src1))
+ replace_reg (src1, get_hard_regnum (regstack, *src1));
+ if (STACK_REG_P (*src2))
+ replace_reg (src2, get_hard_regnum (regstack, *src2));
- for (i = 1; i <= 2; i++)
- if (src_note [i])
- {
- /* If the register that dies is not at the top of stack, then
- move the top of stack to the dead reg */
- if (REGNO (XEXP (src_note[i], 0))
- != regstack->reg[regstack->top])
+ for (i = 1; i <= 2; i++)
+ if (src_note [i])
{
- remove_regno_note (insn, REG_DEAD,
- REGNO (XEXP (src_note [i], 0)));
- emit_pop_insn (insn, regstack, XEXP (src_note[i], 0),
- emit_insn_after);
- }
- else
- {
- CLEAR_HARD_REG_BIT (regstack->reg_set,
- REGNO (XEXP (src_note[i], 0)));
- replace_reg (&XEXP (src_note[i], 0), FIRST_STACK_REG);
- regstack->top--;
+ int regno = REGNO (XEXP (src_note[i], 0));
+
+ /* If the register that dies is not at the top of
+ stack, then move the top of stack to the dead reg */
+ if (regno != regstack->reg[regstack->top])
+ {
+ remove_regno_note (insn, REG_DEAD, regno);
+ emit_pop_insn (insn, regstack, XEXP (src_note[i], 0),
+ EMIT_AFTER);
+ }
+ else
+ {
+ CLEAR_HARD_REG_BIT (regstack->reg_set, regno);
+ replace_reg (&XEXP (src_note[i], 0), FIRST_STACK_REG);
+ regstack->top--;
+ }
}
- }
- }
+ }
- /* Make dest the top of stack. Add dest to regstack if not present. */
- if (get_hard_regnum (regstack, *dest) < FIRST_STACK_REG)
- regstack->reg[++regstack->top] = REGNO (*dest);
- SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
- replace_reg (dest, FIRST_STACK_REG);
+ /* Make dest the top of stack. Add dest to regstack if
+ not present. */
+ if (get_hard_regnum (regstack, *dest) < FIRST_STACK_REG)
+ regstack->reg[++regstack->top] = REGNO (*dest);
+ SET_HARD_REG_BIT (regstack->reg_set, REGNO (*dest));
+ replace_reg (dest, FIRST_STACK_REG);
+ break;
+ default:
+ abort ();
+ }
break;
-
- default:
- abort ();
}
+
+ default:
+ break;
+ }
}
\f
/* Substitute hard regnums for any stack regs in INSN, which has
rtx **note_loc; /* Address of REG field of each note */
enum reg_note *note_kind; /* The type of each note */
- rtx *clobber_reg;
- rtx **clobber_loc;
+ rtx *clobber_reg = 0;
+ rtx **clobber_loc = 0;
struct stack_def temp_stack;
int n_notes;
int i;
int n_inputs, n_outputs;
+ if (! check_asm_stack_operands (insn))
+ return;
+
/* Find out what the constraints required. If no constraint
alternative matches, that is a compiler bug: we should have caught
- such an insn during the life analysis pass (and reload should have
- caught it regardless). */
+ such an insn in check_asm_stack_operands. */
extract_insn (insn);
constrain_operands (1);
alt = which_alternative;
}
}
- bcopy ((char *) regstack, (char *) &temp_stack, sizeof (temp_stack));
+ temp_stack = *regstack;
/* Put the input regs into the desired place in TEMP_STACK. */
if (regno < 0)
abort ();
- if (regno != REGNO (recog_data.operand[i]))
+ if ((unsigned int) regno != REGNO (recog_data.operand[i]))
{
/* recog_data.operand[i] is not in the right place. Find
it and swap it with whatever is already in I's place.
}
}
- /* emit insns before INSN to make sure the reg-stack is in the right
+ /* Emit insns before INSN to make sure the reg-stack is in the right
order. */
- change_stack (insn, regstack, &temp_stack, emit_insn_before);
+ change_stack (insn, regstack, &temp_stack, EMIT_BEFORE);
/* Make the needed input register substitutions. Do death notes and
clobbers too, because these are for inputs, not outputs. */
for (j = 0; j < n_outputs; j++)
if (STACK_REG_P (recog_data.operand[j])
- && REGNO (recog_data.operand[j]) == i)
+ && REGNO (recog_data.operand[j]) == (unsigned) i)
{
regstack->reg[++regstack->top] = i;
SET_HARD_REG_BIT (regstack->reg_set, i);
&& note_kind[j] == REG_UNUSED)
{
insn = emit_pop_insn (insn, regstack, recog_data.operand[i],
- emit_insn_after);
+ EMIT_AFTER);
break;
}
}
REGNO (recog_data.operand[i])))
{
insn = emit_pop_insn (insn, regstack, recog_data.operand[i],
- emit_insn_after);
+ EMIT_AFTER);
break;
}
}
if (REG_NOTE_KIND (note) == REG_UNUSED && STACK_REG_P (XEXP (note, 0)))
{
*note_link = XEXP (note, 1);
- insn = emit_pop_insn (insn, regstack, XEXP (note, 0), emit_insn_after);
+ insn = emit_pop_insn (insn, regstack, XEXP (note, 0), EMIT_AFTER);
}
else
note_link = &XEXP (note, 1);
block. Some registers might have to be popped, but there can never be
a register live in the new block that is not now live.
- Insert any needed insns before or after INSN. WHEN is emit_insn_before
- or emit_insn_after. OLD is the original stack layout, and NEW is
- the desired form. OLD is updated to reflect the code emitted, ie, it
- will be the same as NEW upon return.
+ Insert any needed insns before or after INSN, as indicated by
+ WHERE. OLD is the original stack layout, and NEW is the desired
+ form. OLD is updated to reflect the code emitted, ie, it will be
+ the same as NEW upon return.
This function will not preserve block_end[]. But that information
is no longer needed once this has executed. */
static void
-change_stack (insn, old, new, when)
+change_stack (insn, old, new, where)
rtx insn;
stack old;
stack new;
- rtx (*when)();
+ enum emit_where where;
{
int reg;
+ int update_end = 0;
- /* We will be inserting new insns "backwards", by calling emit_insn_before.
- If we are to insert after INSN, find the next insn, and insert before
- it. */
+ /* We will be inserting new insns "backwards". If we are to insert
+ after INSN, find the next insn, and insert before it. */
- if (when == emit_insn_after)
- insn = NEXT_INSN (insn);
+ if (where == EMIT_AFTER)
+ {
+ if (current_block && current_block->end == insn)
+ update_end = 1;
+ insn = NEXT_INSN (insn);
+ }
/* Pop any registers that are not needed in the new block. */
for (reg = old->top; reg >= 0; reg--)
if (! TEST_HARD_REG_BIT (new->reg_set, old->reg[reg]))
emit_pop_insn (insn, old, FP_MODE_REG (old->reg[reg], DFmode),
- emit_insn_before);
+ EMIT_BEFORE);
if (new->top == -2)
{
the old stack order. */
new->top = old->top;
- bcopy (old->reg, new->reg, sizeof (new->reg));
+ memcpy (new->reg, old->reg, sizeof (new->reg));
}
else
{
not their depth or liveliness. */
GO_IF_HARD_REG_EQUAL (old->reg_set, new->reg_set, win);
-
abort ();
-
win:
-
if (old->top != new->top)
abort ();
if (old->reg[reg] != new->reg[reg])
abort ();
}
+
+ if (update_end)
+ current_block->end = PREV_INSN (insn);
}
\f
-/* Check PAT, which points to RTL in INSN, for a LABEL_REF. If it is
- found, ensure that a jump from INSN to the code_label to which the
- label_ref points ends up with the same stack as that at the
- code_label. Do this by inserting insns just before the code_label to
- pop and rotate the stack until it is in the correct order. REGSTACK
- is the order of the register stack in INSN.
-
- Any code that is emitted here must not be later processed as part
- of any block, as it will already contain hard register numbers. */
+/* Print stack configuration. */
static void
-goto_block_pat (insn, regstack, pat)
- rtx insn;
- stack regstack;
- rtx pat;
+print_stack (file, s)
+ FILE *file;
+ stack s;
{
- rtx label;
- rtx new_jump, new_label, new_barrier;
- rtx *ref;
- stack label_stack;
- struct stack_def temp_stack;
- int reg;
+ if (! file)
+ return;
- switch (GET_CODE (pat))
+ if (s->top == -2)
+ fprintf (file, "uninitialized\n");
+ else if (s->top == -1)
+ fprintf (file, "empty\n");
+ else
{
- case RETURN:
- straighten_stack (PREV_INSN (insn), regstack);
- return;
- default:
- {
- int i, j;
- const char *fmt = GET_RTX_FORMAT (GET_CODE (pat));
+ int i;
+ fputs ("[ ", file);
+ for (i = 0; i <= s->top; ++i)
+ fprintf (file, "%d ", s->reg[i]);
+ fputs ("]\n", file);
+ }
+}
+\f
+/* This function was doing life analysis. We now let the regular live
+ code do it's job, so we only need to check some extra invariants
+ that reg-stack expects. Primary among these being that all registers
+ are initialized before use.
+
+ The function returns true when code was emitted to CFG edges and
+ commit_edge_insertions needs to be called. */
+
+static int
+convert_regs_entry ()
+{
+ int inserted = 0, i;
+ edge e;
+
+ for (i = n_basic_blocks - 1; i >= 0; --i)
+ {
+ basic_block block = BASIC_BLOCK (i);
+ block_info bi = BLOCK_INFO (block);
+ int reg;
+
+ /* Set current register status at last instruction `uninitialized'. */
+ bi->stack_in.top = -2;
+
+ /* Copy live_at_end and live_at_start into temporaries. */
+ for (reg = FIRST_STACK_REG; reg <= LAST_STACK_REG; reg++)
+ {
+ if (REGNO_REG_SET_P (block->global_live_at_end, reg))
+ SET_HARD_REG_BIT (bi->out_reg_set, reg);
+ if (REGNO_REG_SET_P (block->global_live_at_start, reg))
+ SET_HARD_REG_BIT (bi->stack_in.reg_set, reg);
+ }
+ }
+
+ /* Load something into each stack register live at function entry.
+ Such live registers can be caused by uninitialized variables or
+ functions not returning values on all paths. In order to keep
+ the push/pop code happy, and to not scrog the register stack, we
+ must put something in these registers. Use a QNaN.
+
+ Note that we are insertting converted code here. This code is
+ never seen by the convert_regs pass. */
+
+ for (e = ENTRY_BLOCK_PTR->succ; e ; e = e->succ_next)
+ {
+ basic_block block = e->dest;
+ block_info bi = BLOCK_INFO (block);
+ int reg, top = -1;
- for (i = GET_RTX_LENGTH (GET_CODE (pat)) - 1; i >= 0; i--)
+ for (reg = LAST_STACK_REG; reg >= FIRST_STACK_REG; --reg)
+ if (TEST_HARD_REG_BIT (bi->stack_in.reg_set, reg))
{
- if (fmt[i] == 'e')
- goto_block_pat (insn, regstack, XEXP (pat, i));
- if (fmt[i] == 'E')
- for (j = 0; j < XVECLEN (pat, i); j++)
- goto_block_pat (insn, regstack, XVECEXP (pat, i, j));
+ rtx init;
+
+ bi->stack_in.reg[++top] = reg;
+
+ init = gen_rtx_SET (VOIDmode,
+ FP_MODE_REG (FIRST_STACK_REG, SFmode),
+ nan);
+ insert_insn_on_edge (init, e);
+ inserted = 1;
}
- return;
- }
- case LABEL_REF:;
+
+ bi->stack_in.top = top;
}
- label = XEXP (pat, 0);
- if (GET_CODE (label) != CODE_LABEL)
- abort ();
+ return inserted;
+}
- /* First, see if in fact anything needs to be done to the stack at all. */
- if (INSN_UID (label) <= 0)
- return;
+/* Construct the desired stack for function exit. This will either
+ be `empty', or the function return value at top-of-stack. */
- label_stack = &block_stack_in[BLOCK_NUM (label)];
+static void
+convert_regs_exit ()
+{
+ int value_reg_low, value_reg_high;
+ stack output_stack;
+ rtx retvalue;
+
+ retvalue = stack_result (current_function_decl);
+ value_reg_low = value_reg_high = -1;
+ if (retvalue)
+ {
+ value_reg_low = REGNO (retvalue);
+ value_reg_high = value_reg_low
+ + HARD_REGNO_NREGS (value_reg_low, GET_MODE (retvalue)) - 1;
+ }
- if (label_stack->top == -2)
+ output_stack = &BLOCK_INFO (EXIT_BLOCK_PTR)->stack_in;
+ if (value_reg_low == -1)
+ output_stack->top = -1;
+ else
{
- /* If the target block hasn't had a stack order selected, then
- we need merely ensure that no pops are needed. */
+ int reg;
+
+ output_stack->top = value_reg_high - value_reg_low;
+ for (reg = value_reg_low; reg <= value_reg_high; ++reg)
+ {
+ output_stack->reg[reg - value_reg_low] = reg;
+ SET_HARD_REG_BIT (output_stack->reg_set, reg);
+ }
+ }
+}
+
+/* Adjust the stack of this block on exit to match the stack of the
+ target block, or copy stack info into the stack of the successor
+ of the successor hasn't been processed yet. */
+static bool
+compensate_edge (e, file)
+ edge e;
+ FILE *file;
+{
+ basic_block block = e->src, target = e->dest;
+ block_info bi = BLOCK_INFO (block);
+ struct stack_def regstack, tmpstack;
+ stack target_stack = &BLOCK_INFO (target)->stack_in;
+ int reg;
+
+ current_block = block;
+ regstack = bi->stack_out;
+ if (file)
+ fprintf (file, "Edge %d->%d: ", block->index, target->index);
- for (reg = regstack->top; reg >= 0; reg--)
- if (! TEST_HARD_REG_BIT (label_stack->reg_set, regstack->reg[reg]))
+ if (target_stack->top == -2)
+ {
+ /* The target block hasn't had a stack order selected.
+ We need merely ensure that no pops are needed. */
+ for (reg = regstack.top; reg >= 0; --reg)
+ if (!TEST_HARD_REG_BIT (target_stack->reg_set, regstack.reg[reg]))
break;
if (reg == -1)
{
- /* change_stack will not emit any code in this case. */
+ if (file)
+ fprintf (file, "new block; copying stack position\n");
- change_stack (label, regstack, label_stack, emit_insn_after);
- return;
+ /* change_stack kills values in regstack. */
+ tmpstack = regstack;
+
+ change_stack (block->end, &tmpstack, target_stack, EMIT_AFTER);
+ return false;
}
+
+ if (file)
+ fprintf (file, "new block; pops needed\n");
}
- else if (label_stack->top == regstack->top)
+ else
{
- for (reg = label_stack->top; reg >= 0; reg--)
- if (label_stack->reg[reg] != regstack->reg[reg])
- break;
+ if (target_stack->top == regstack.top)
+ {
+ for (reg = target_stack->top; reg >= 0; --reg)
+ if (target_stack->reg[reg] != regstack.reg[reg])
+ break;
- if (reg == -1)
- return;
+ if (reg == -1)
+ {
+ if (file)
+ fprintf (file, "no changes needed\n");
+ return false;
+ }
+ }
+
+ if (file)
+ {
+ fprintf (file, "correcting stack to ");
+ print_stack (file, target_stack);
+ }
}
- /* At least one insn will need to be inserted before label. Insert
- a jump around the code we are about to emit. Emit a label for the new
- code, and point the original insn at this new label. We can't use
- redirect_jump here, because we're using fld[4] of the code labels as
- LABEL_REF chains, no NUSES counters. */
+ /* Care for non-call EH edges specially. The normal return path have
+ values in registers. These will be popped en masse by the unwind
+ library. */
+ if ((e->flags & (EDGE_EH | EDGE_ABNORMAL_CALL)) == EDGE_EH)
+ target_stack->top = -1;
- new_jump = emit_jump_insn_before (gen_jump (label), label);
- record_label_references (new_jump, PATTERN (new_jump));
- JUMP_LABEL (new_jump) = label;
+ /* Other calls may appear to have values live in st(0), but the
+ abnormal return path will not have actually loaded the values. */
+ else if (e->flags & EDGE_ABNORMAL_CALL)
+ {
+ /* Assert that the lifetimes are as we expect -- one value
+ live at st(0) on the end of the source block, and no
+ values live at the beginning of the destination block. */
+ HARD_REG_SET tmp;
- new_barrier = emit_barrier_after (new_jump);
+ CLEAR_HARD_REG_SET (tmp);
+ GO_IF_HARD_REG_EQUAL (target_stack->reg_set, tmp, eh1);
+ abort ();
+ eh1:
- new_label = gen_label_rtx ();
- emit_label_after (new_label, new_barrier);
- LABEL_REFS (new_label) = new_label;
+ SET_HARD_REG_BIT (tmp, FIRST_STACK_REG);
+ GO_IF_HARD_REG_EQUAL (regstack.reg_set, tmp, eh2);
+ abort ();
+ eh2:
- /* The old label_ref will no longer point to the code_label if now uses,
- so strip the label_ref from the code_label's chain of references. */
+ target_stack->top = -1;
+ }
- for (ref = &LABEL_REFS (label); *ref != label; ref = &LABEL_NEXTREF (*ref))
- if (*ref == pat)
- break;
+ /* It is better to output directly to the end of the block
+ instead of to the edge, because emit_swap can do minimal
+ insn scheduling. We can do this when there is only one
+ edge out, and it is not abnormal. */
+ else if (block->succ->succ_next == NULL && !(e->flags & EDGE_ABNORMAL))
+ {
+ /* change_stack kills values in regstack. */
+ tmpstack = regstack;
- if (*ref == label)
- abort ();
+ change_stack (block->end, &tmpstack, target_stack,
+ (GET_CODE (block->end) == JUMP_INSN
+ ? EMIT_BEFORE : EMIT_AFTER));
+ }
+ else
+ {
+ rtx seq, after;
- *ref = LABEL_NEXTREF (*ref);
+ /* We don't support abnormal edges. Global takes care to
+ avoid any live register across them, so we should never
+ have to insert instructions on such edges. */
+ if (e->flags & EDGE_ABNORMAL)
+ abort ();
- XEXP (pat, 0) = new_label;
- record_label_references (insn, PATTERN (insn));
+ current_block = NULL;
+ start_sequence ();
- if (JUMP_LABEL (insn) == label)
- JUMP_LABEL (insn) = new_label;
+ /* ??? change_stack needs some point to emit insns after.
+ Also needed to keep gen_sequence from returning a
+ pattern as opposed to a sequence, which would lose
+ REG_DEAD notes. */
+ after = emit_note (NULL, NOTE_INSN_DELETED);
- /* Now emit the needed code. */
+ tmpstack = regstack;
+ change_stack (after, &tmpstack, target_stack, EMIT_BEFORE);
- temp_stack = *regstack;
+ seq = gen_sequence ();
+ end_sequence ();
- change_stack (new_label, &temp_stack, label_stack, emit_insn_after);
+ insert_insn_on_edge (seq, e);
+ return true;
+ }
+ return false;
}
-\f
-/* Traverse all basic blocks in a function, converting the register
- references in each insn from the "flat" register file that gcc uses, to
- the stack-like registers the 387 uses. */
-static void
-convert_regs ()
+/* Convert stack register references in one block. */
+
+static int
+convert_regs_1 (file, block)
+ FILE *file;
+ basic_block block;
{
- register int block, reg;
- register rtx insn, next;
struct stack_def regstack;
-
- for (block = 0; block < blocks; block++)
+ block_info bi = BLOCK_INFO (block);
+ int inserted, reg;
+ rtx insn, next;
+ edge e, beste = NULL;
+
+ inserted = 0;
+
+ /* Find the edge we will copy stack from. It should be the most frequent
+ one as it will get cheapest after compensation code is generated,
+ if multiple such exists, take one with largest count, preffer critical
+ one (as splitting critical edges is more expensive), or one with lowest
+ index, to avoid random changes with different orders of the edges. */
+ for (e = block->pred; e ; e = e->pred_next)
{
- if (block_stack_in[block].top == -2)
+ if (e->flags & EDGE_DFS_BACK)
+ ;
+ else if (! beste)
+ beste = e;
+ else if (EDGE_FREQUENCY (beste) < EDGE_FREQUENCY (e))
+ beste = e;
+ else if (EDGE_FREQUENCY (beste) > EDGE_FREQUENCY (e))
+ ;
+ else if (beste->count < e->count)
+ beste = e;
+ else if (beste->count > e->count)
+ ;
+ else if ((e->flags & EDGE_CRITICAL) != (beste->flags & EDGE_CRITICAL))
{
- /* This block has not been previously encountered. Choose a
- default mapping for any stack regs live on entry */
-
- block_stack_in[block].top = -1;
-
- for (reg = LAST_STACK_REG; reg >= FIRST_STACK_REG; reg--)
- if (TEST_HARD_REG_BIT (block_stack_in[block].reg_set, reg))
- block_stack_in[block].reg[++block_stack_in[block].top] = reg;
+ if (e->flags & EDGE_CRITICAL)
+ beste = e;
}
+ else if (e->src->index < beste->src->index)
+ beste = e;
+ }
- /* Process all insns in this block. Keep track of `next' here,
- so that we don't process any insns emitted while making
- substitutions in INSN. */
-
- next = block_begin[block];
- regstack = block_stack_in[block];
- do
- {
- insn = next;
- next = NEXT_INSN (insn);
-
- /* Don't bother processing unless there is a stack reg
- mentioned or if it's a CALL_INSN (register passing of
- floating point values). */
+ /* Entry block does have stack already initialized. */
+ if (bi->stack_in.top == -2)
+ inserted |= compensate_edge (beste, file);
+ else
+ beste = NULL;
+
+ current_block = block;
- if (stack_regs_mentioned (insn) || GET_CODE (insn) == CALL_INSN)
- subst_stack_regs (insn, ®stack);
+ if (file)
+ {
+ fprintf (file, "\nBasic block %d\nInput stack: ", block->index);
+ print_stack (file, &bi->stack_in);
+ }
- } while (insn != block_end[block]);
-
- /* For all further actions, INSN needs to be the last insn in
- this basic block. If subst_stack_regs inserted additional
- instructions after INSN, it is no longer the last one at
- this point. */
- next = PREV_INSN (next);
-
- /* If subst_stack_regs inserted something after a JUMP_INSN, that
- is almost certainly a bug. */
- if (GET_CODE (insn) == JUMP_INSN && insn != next)
- abort ();
+ /* Process all insns in this block. Keep track of NEXT so that we
+ don't process insns emitted while substituting in INSN. */
+ next = block->head;
+ regstack = bi->stack_in;
+ do
+ {
insn = next;
+ next = NEXT_INSN (insn);
- /* Something failed if the stack life doesn't match. */
+ /* Ensure we have not missed a block boundary. */
+ if (next == NULL)
+ abort ();
+ if (insn == block->end)
+ next = NULL;
- GO_IF_HARD_REG_EQUAL (regstack.reg_set, block_out_reg_set[block], win);
+ /* Don't bother processing unless there is a stack reg
+ mentioned or if it's a CALL_INSN. */
+ if (stack_regs_mentioned (insn)
+ || GET_CODE (insn) == CALL_INSN)
+ {
+ if (file)
+ {
+ fprintf (file, " insn %d input stack: ",
+ INSN_UID (insn));
+ print_stack (file, ®stack);
+ }
+ subst_stack_regs (insn, ®stack);
+ }
+ }
+ while (next);
- abort ();
+ if (file)
+ {
+ fprintf (file, "Expected live registers [");
+ for (reg = FIRST_STACK_REG; reg <= LAST_STACK_REG; ++reg)
+ if (TEST_HARD_REG_BIT (bi->out_reg_set, reg))
+ fprintf (file, " %d", reg);
+ fprintf (file, " ]\nOutput stack: ");
+ print_stack (file, ®stack);
+ }
- win:
+ insn = block->end;
+ if (GET_CODE (insn) == JUMP_INSN)
+ insn = PREV_INSN (insn);
- /* Adjust the stack of this block on exit to match the stack of
- the target block, or copy stack information into stack of
- jump target if the target block's stack order hasn't been set
- yet. */
+ /* If the function is declared to return a value, but it returns one
+ in only some cases, some registers might come live here. Emit
+ necessary moves for them. */
- if (GET_CODE (insn) == JUMP_INSN)
- goto_block_pat (insn, ®stack, PATTERN (insn));
+ for (reg = FIRST_STACK_REG; reg <= LAST_STACK_REG; ++reg)
+ {
+ if (TEST_HARD_REG_BIT (bi->out_reg_set, reg)
+ && ! TEST_HARD_REG_BIT (regstack.reg_set, reg))
+ {
+ rtx set;
- /* Likewise handle the case where we fall into the next block. */
+ if (file)
+ {
+ fprintf (file, "Emitting insn initializing reg %d\n",
+ reg);
+ }
- if ((block < blocks - 1) && block_drops_in[block+1])
- change_stack (insn, ®stack, &block_stack_in[block+1],
- emit_insn_after);
+ set = gen_rtx_SET (VOIDmode, FP_MODE_REG (reg, SFmode),
+ nan);
+ insn = emit_block_insn_after (set, insn, block);
+ subst_stack_regs (insn, ®stack);
+ }
}
- /* If the last basic block is the end of a loop, and that loop has
- regs live at its start, then the last basic block will have regs live
- at its end that need to be popped before the function returns. */
+ /* Something failed if the stack lives don't match. */
+ GO_IF_HARD_REG_EQUAL (regstack.reg_set, bi->out_reg_set, win);
+ abort ();
+ win:
+ bi->stack_out = regstack;
- {
- int value_reg_low, value_reg_high;
- value_reg_low = value_reg_high = -1;
+ /* Compensate the back edges, as those wasn't visited yet. */
+ for (e = block->succ; e ; e = e->succ_next)
{
- rtx retvalue;
- if ((retvalue = stack_result (current_function_decl)))
+ if (e->flags & EDGE_DFS_BACK
+ || (e->dest == EXIT_BLOCK_PTR))
{
- value_reg_low = REGNO (retvalue);
- value_reg_high = value_reg_low +
- HARD_REGNO_NREGS (value_reg_low, GET_MODE (retvalue)) - 1;
+ if (!BLOCK_INFO (e->dest)->done
+ && e->dest != block)
+ abort ();
+ inserted |= compensate_edge (e, file);
+ }
+ }
+ for (e = block->pred; e ; e = e->pred_next)
+ {
+ if (e != beste && !(e->flags & EDGE_DFS_BACK)
+ && e->src != ENTRY_BLOCK_PTR)
+ {
+ if (!BLOCK_INFO (e->src)->done)
+ abort ();
+ inserted |= compensate_edge (e, file);
}
-
}
- for (reg = regstack.top; reg >= 0; reg--)
- if (regstack.reg[reg] < value_reg_low
- || regstack.reg[reg] > value_reg_high)
- insn = emit_pop_insn (insn, ®stack,
- FP_MODE_REG (regstack.reg[reg], DFmode),
- emit_insn_after);
- }
- straighten_stack (insn, ®stack);
+
+ return inserted;
}
-\f
-/* Check expression PAT, which is in INSN, for label references. if
- one is found, print the block number of destination to FILE. */
-static void
-print_blocks (file, insn, pat)
+/* Convert registers in all blocks reachable from BLOCK. */
+
+static int
+convert_regs_2 (file, block)
FILE *file;
- rtx insn, pat;
+ basic_block block;
{
- register RTX_CODE code = GET_CODE (pat);
- register int i;
- register const char *fmt;
+ basic_block *stack, *sp;
+ int inserted;
- if (code == LABEL_REF)
- {
- register rtx label = XEXP (pat, 0);
+ stack = (basic_block *) xmalloc (sizeof (*stack) * n_basic_blocks);
+ sp = stack;
- if (GET_CODE (label) != CODE_LABEL)
- abort ();
+ *sp++ = block;
- fprintf (file, " %d", BLOCK_NUM (label));
+ inserted = 0;
+ do
+ {
+ edge e;
- return;
- }
+ block = *--sp;
+ inserted |= convert_regs_1 (file, block);
+ BLOCK_INFO (block)->done = 1;
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- {
- if (fmt[i] == 'e')
- print_blocks (file, insn, XEXP (pat, i));
- if (fmt[i] == 'E')
- {
- register int j;
- for (j = 0; j < XVECLEN (pat, i); j++)
- print_blocks (file, insn, XVECEXP (pat, i, j));
- }
+ for (e = block->succ; e ; e = e->succ_next)
+ if (! (e->flags & EDGE_DFS_BACK))
+ {
+ BLOCK_INFO (e->dest)->predecesors--;
+ if (!BLOCK_INFO (e->dest)->predecesors)
+ *sp++ = e->dest;
+ }
}
+ while (sp != stack);
+
+ return inserted;
}
-\f
-/* Write information about stack registers and stack blocks into FILE.
- This is part of making a debugging dump. */
-static void
-dump_stack_info (file)
+/* Traverse all basic blocks in a function, converting the register
+ references in each insn from the "flat" register file that gcc uses,
+ to the stack-like registers the 387 uses. */
+
+static int
+convert_regs (file)
FILE *file;
{
- register int block;
+ int inserted, i;
+ edge e;
- fprintf (file, "\n%d stack blocks.\n", blocks);
- for (block = 0; block < blocks; block++)
- {
- register rtx head, jump, end;
- register int regno;
+ /* Initialize uninitialized registers on function entry. */
+ inserted = convert_regs_entry ();
- fprintf (file, "\nStack block %d: first insn %d, last %d.\n",
- block, INSN_UID (block_begin[block]),
- INSN_UID (block_end[block]));
+ /* Construct the desired stack for function exit. */
+ convert_regs_exit ();
+ BLOCK_INFO (EXIT_BLOCK_PTR)->done = 1;
- head = block_begin[block];
+ /* ??? Future: process inner loops first, and give them arbitrary
+ initial stacks which emit_swap_insn can modify. This ought to
+ prevent double fxch that aften appears at the head of a loop. */
- fprintf (file, "Reached from blocks: ");
- if (GET_CODE (head) == CODE_LABEL)
- for (jump = LABEL_REFS (head);
- jump != head;
- jump = LABEL_NEXTREF (jump))
- {
- register int from_block = BLOCK_NUM (CONTAINING_INSN (jump));
- fprintf (file, " %d", from_block);
- }
- if (block_drops_in[block])
- fprintf (file, " previous");
+ /* Process all blocks reachable from all entry points. */
+ for (e = ENTRY_BLOCK_PTR->succ; e ; e = e->succ_next)
+ inserted |= convert_regs_2 (file, e->dest);
+
+ /* ??? Process all unreachable blocks. Though there's no excuse
+ for keeping these even when not optimizing. */
+ for (i = 0; i < n_basic_blocks; ++i)
+ {
+ basic_block b = BASIC_BLOCK (i);
+ block_info bi = BLOCK_INFO (b);
- fprintf (file, "\nlive stack registers on block entry: ");
- for (regno = FIRST_STACK_REG; regno <= LAST_STACK_REG; regno++)
+ if (! bi->done)
{
- if (TEST_HARD_REG_BIT (block_stack_in[block].reg_set, regno))
- fprintf (file, "%d ", regno);
- }
+ int reg;
- fprintf (file, "\nlive stack registers on block exit: ");
- for (regno = FIRST_STACK_REG; regno <= LAST_STACK_REG; regno++)
- {
- if (TEST_HARD_REG_BIT (block_out_reg_set[block], regno))
- fprintf (file, "%d ", regno);
- }
+ /* Create an arbitrary input stack. */
+ bi->stack_in.top = -1;
+ for (reg = LAST_STACK_REG; reg >= FIRST_STACK_REG; --reg)
+ if (TEST_HARD_REG_BIT (bi->stack_in.reg_set, reg))
+ bi->stack_in.reg[++bi->stack_in.top] = reg;
- end = block_end[block];
+ inserted |= convert_regs_2 (file, b);
+ }
+ }
- fprintf (file, "\nJumps to blocks: ");
- if (GET_CODE (end) == JUMP_INSN)
- print_blocks (file, end, PATTERN (end));
+ if (inserted)
+ commit_edge_insertions ();
- if (block + 1 < blocks && block_drops_in[block+1])
- fprintf (file, " next");
- else if (block + 1 == blocks
- || (GET_CODE (end) == JUMP_INSN
- && GET_CODE (PATTERN (end)) == RETURN))
- fprintf (file, " return");
+ if (file)
+ fputc ('\n', file);
- fprintf (file, "\n");
- }
+ return inserted;
}
#endif /* STACK_REGS */