/* Subroutines used by or related to instruction recognition.
Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
- 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "hard-reg-set.h"
#include "recog.h"
#include "regs.h"
+#include "addresses.h"
#include "expr.h"
#include "function.h"
#include "flags.h"
#include "basic-block.h"
#include "output.h"
#include "reload.h"
+#include "target.h"
+#include "timevar.h"
+#include "tree-pass.h"
+#include "df.h"
#ifndef STACK_PUSH_CODE
#ifdef STACK_GROWS_DOWNWARD
#endif
#endif
-static void validate_replace_rtx_1 (rtx *, rtx, rtx, rtx);
-static rtx *find_single_use_1 (rtx, rtx *);
+#ifndef HAVE_ATTR_enabled
+static inline bool
+get_attr_enabled (rtx insn ATTRIBUTE_UNUSED)
+{
+ return true;
+}
+#endif
+
+static void validate_replace_rtx_1 (rtx *, rtx, rtx, rtx, bool);
static void validate_replace_src_1 (rtx *, void *);
static rtx split_insn (rtx);
This should be 0 if you are generating rtl, such as if you are calling
the functions in optabs.c and expmed.c (most of the time).
This should be 1 if all valid insns need to be recognized,
- such as in regclass.c and final.c and reload.c.
+ such as in reginfo.c and final.c and reload.c.
init_recog and init_recog_no_volatile are responsible for setting this. */
volatile_ok = 1;
}
-/* Try recognizing the instruction INSN,
- and return the code number that results.
- Remember the code so that repeated calls do not
- need to spend the time for actual rerecognition.
-
- This function is the normal interface to instruction recognition.
- The automatically-generated function `recog' is normally called
- through this one. (The only exception is in combine.c.) */
-
-int
-recog_memoized_1 (rtx insn)
-{
- if (INSN_CODE (insn) < 0)
- INSN_CODE (insn) = recog (PATTERN (insn), insn, 0);
- return INSN_CODE (insn);
-}
\f
/* Check that X is an insn-body for an `asm' with operands
and that the operands mentioned in it are legitimate. */
if (noperands == 0)
return 1;
- operands = alloca (noperands * sizeof (rtx));
- constraints = alloca (noperands * sizeof (char *));
+ operands = XALLOCAVEC (rtx, noperands);
+ constraints = XALLOCAVEC (const char *, noperands);
- decode_asm_operands (x, operands, NULL, constraints, NULL);
+ decode_asm_operands (x, operands, NULL, constraints, NULL, NULL);
for (i = 0; i < noperands; i++)
{
const char *c = constraints[i];
if (c[0] == '%')
c++;
- if (ISDIGIT ((unsigned char) c[0]) && c[1] == '\0')
- c = constraints[c[0] - '0'];
-
- if (! asm_operand_ok (operands[i], c))
+ if (! asm_operand_ok (operands[i], c, constraints))
return 0;
}
int old_code;
rtx *loc;
rtx old;
+ bool unshare;
} change_t;
static change_t *changes;
static int num_changes = 0;
/* Validate a proposed change to OBJECT. LOC is the location in the rtl
- at which NEW will be placed. If OBJECT is zero, no validation is done,
+ at which NEW_RTX will be placed. If OBJECT is zero, no validation is done,
the change is simply made.
Two types of objects are supported: If OBJECT is a MEM, memory_address_p
is not valid for the machine, suppress the change and return zero.
Otherwise, perform the change and return 1. */
-int
-validate_change (rtx object, rtx *loc, rtx new, int in_group)
+static bool
+validate_change_1 (rtx object, rtx *loc, rtx new_rtx, bool in_group, bool unshare)
{
rtx old = *loc;
- if (old == new || rtx_equal_p (old, new))
+ if (old == new_rtx || rtx_equal_p (old, new_rtx))
return 1;
- if (in_group == 0 && num_changes != 0)
- abort ();
+ gcc_assert (in_group != 0 || num_changes == 0);
- *loc = new;
+ *loc = new_rtx;
/* Save the information describing this change. */
if (num_changes >= changes_allocated)
else
changes_allocated *= 2;
- changes = xrealloc (changes, sizeof (change_t) * changes_allocated);
+ changes = XRESIZEVEC (change_t, changes, changes_allocated);
}
changes[num_changes].object = object;
changes[num_changes].loc = loc;
changes[num_changes].old = old;
+ changes[num_changes].unshare = unshare;
- if (object && GET_CODE (object) != MEM)
+ if (object && !MEM_P (object))
{
/* Set INSN_CODE to force rerecognition of insn. Save old code in
case invalid. */
return apply_change_group ();
}
+/* Wrapper for validate_change_1 without the UNSHARE argument defaulting
+ UNSHARE to false. */
+
+bool
+validate_change (rtx object, rtx *loc, rtx new_rtx, bool in_group)
+{
+ return validate_change_1 (object, loc, new_rtx, in_group, false);
+}
+
+/* Wrapper for validate_change_1 without the UNSHARE argument defaulting
+ UNSHARE to true. */
+
+bool
+validate_unshare_change (rtx object, rtx *loc, rtx new_rtx, bool in_group)
+{
+ return validate_change_1 (object, loc, new_rtx, in_group, true);
+}
+
+
+/* Keep X canonicalized if some changes have made it non-canonical; only
+ modifies the operands of X, not (for example) its code. Simplifications
+ are not the job of this routine.
+
+ Return true if anything was changed. */
+bool
+canonicalize_change_group (rtx insn, rtx x)
+{
+ if (COMMUTATIVE_P (x)
+ && swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
+ {
+ /* Oops, the caller has made X no longer canonical.
+ Let's redo the changes in the correct order. */
+ rtx tem = XEXP (x, 0);
+ validate_change (insn, &XEXP (x, 0), XEXP (x, 1), 1);
+ validate_change (insn, &XEXP (x, 1), tem, 1);
+ return true;
+ }
+ else
+ return false;
+}
+
+
/* This subroutine of apply_change_group verifies whether the changes to INSN
were valid; i.e. whether INSN can still be recognized. */
return num_changes;
}
-/* Apply a group of changes previously issued with `validate_change'.
+/* Tentatively apply the changes numbered NUM and up.
Return 1 if all changes are valid, zero otherwise. */
int
-apply_change_group (void)
+verify_changes (int num)
{
int i;
rtx last_validated = NULL_RTX;
we also require that the operands meet the constraints for
the insn. */
- for (i = 0; i < num_changes; i++)
+ for (i = num; i < num_changes; i++)
{
rtx object = changes[i].object;
if (object == 0 || object == last_validated)
continue;
- if (GET_CODE (object) == MEM)
+ if (MEM_P (object))
{
- if (! memory_address_p (GET_MODE (object), XEXP (object, 0)))
+ if (! memory_address_addr_space_p (GET_MODE (object),
+ XEXP (object, 0),
+ MEM_ADDR_SPACE (object)))
break;
}
+ else if (REG_P (changes[i].old)
+ && asm_noperands (PATTERN (object)) > 0
+ && REG_EXPR (changes[i].old) != NULL_TREE
+ && DECL_ASSEMBLER_NAME_SET_P (REG_EXPR (changes[i].old))
+ && DECL_REGISTER (REG_EXPR (changes[i].old)))
+ {
+ /* Don't allow changes of hard register operands to inline
+ assemblies if they have been defined as register asm ("x"). */
+ break;
+ }
+ else if (DEBUG_INSN_P (object))
+ continue;
else if (insn_invalid_p (object))
{
rtx pat = PATTERN (object);
validate_change (object, &PATTERN (object), newpat, 1);
continue;
}
- else if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER)
+ else if (GET_CODE (pat) == USE || GET_CODE (pat) == CLOBBER
+ || GET_CODE (pat) == VAR_LOCATION)
/* If this insn is a CLOBBER or USE, it is always valid, but is
never recognized. */
continue;
last_validated = object;
}
- if (i == num_changes)
+ return (i == num_changes);
+}
+
+/* A group of changes has previously been issued with validate_change
+ and verified with verify_changes. Call df_insn_rescan for each of
+ the insn changed and clear num_changes. */
+
+void
+confirm_change_group (void)
+{
+ int i;
+ rtx last_object = NULL;
+
+ for (i = 0; i < num_changes; i++)
{
- basic_block bb;
+ rtx object = changes[i].object;
+
+ if (changes[i].unshare)
+ *changes[i].loc = copy_rtx (*changes[i].loc);
+
+ /* Avoid unnecessary rescanning when multiple changes to same instruction
+ are made. */
+ if (object)
+ {
+ if (object != last_object && last_object && INSN_P (last_object))
+ df_insn_rescan (last_object);
+ last_object = object;
+ }
+ }
+
+ if (last_object && INSN_P (last_object))
+ df_insn_rescan (last_object);
+ num_changes = 0;
+}
- for (i = 0; i < num_changes; i++)
- if (changes[i].object
- && INSN_P (changes[i].object)
- && (bb = BLOCK_FOR_INSN (changes[i].object)))
- bb->flags |= BB_DIRTY;
+/* Apply a group of changes previously issued with `validate_change'.
+ If all changes are valid, call confirm_change_group and return 1,
+ otherwise, call cancel_changes and return 0. */
- num_changes = 0;
+int
+apply_change_group (void)
+{
+ if (verify_changes (0))
+ {
+ confirm_change_group ();
return 1;
}
else
}
}
+
/* Return the number of changes so far in the current group. */
int
for (i = num_changes - 1; i >= num; i--)
{
*changes[i].loc = changes[i].old;
- if (changes[i].object && GET_CODE (changes[i].object) != MEM)
+ if (changes[i].object && !MEM_P (changes[i].object))
INSN_CODE (changes[i].object) = changes[i].old_code;
}
num_changes = num;
}
-/* Replace every occurrence of FROM in X with TO. Mark each change with
- validate_change passing OBJECT. */
+/* A subroutine of validate_replace_rtx_1 that tries to simplify the resulting
+ rtx. */
static void
-validate_replace_rtx_1 (rtx *loc, rtx from, rtx to, rtx object)
+simplify_while_replacing (rtx *loc, rtx to, rtx object,
+ enum machine_mode op0_mode)
{
- int i, j;
- const char *fmt;
rtx x = *loc;
- enum rtx_code code;
- enum machine_mode op0_mode = VOIDmode;
- int prev_changes = num_changes;
- rtx new;
-
- if (!x)
- return;
-
- code = GET_CODE (x);
- fmt = GET_RTX_FORMAT (code);
- if (fmt[0] == 'e')
- op0_mode = GET_MODE (XEXP (x, 0));
-
- /* X matches FROM if it is the same rtx or they are both referring to the
- same register in the same mode. Avoid calling rtx_equal_p unless the
- operands look similar. */
-
- if (x == from
- || (GET_CODE (x) == REG && GET_CODE (from) == REG
- && GET_MODE (x) == GET_MODE (from)
- && REGNO (x) == REGNO (from))
- || (GET_CODE (x) == GET_CODE (from) && GET_MODE (x) == GET_MODE (from)
- && rtx_equal_p (x, from)))
- {
- validate_change (object, loc, to, 1);
- return;
- }
-
- /* Call ourself recursively to perform the replacements. */
-
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- {
- if (fmt[i] == 'e')
- validate_replace_rtx_1 (&XEXP (x, i), from, to, object);
- else if (fmt[i] == 'E')
- for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object);
- }
-
- /* If we didn't substitute, there is nothing more to do. */
- if (num_changes == prev_changes)
- return;
-
- /* Allow substituted expression to have different mode. This is used by
- regmove to change mode of pseudo register. */
- if (fmt[0] == 'e' && GET_MODE (XEXP (x, 0)) != VOIDmode)
- op0_mode = GET_MODE (XEXP (x, 0));
-
- /* Do changes needed to keep rtx consistent. Don't do any other
- simplifications, as it is not our job. */
+ enum rtx_code code = GET_CODE (x);
+ rtx new_rtx;
- if ((GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == 'c')
+ if (SWAPPABLE_OPERANDS_P (x)
&& swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
{
- validate_change (object, loc,
- gen_rtx_fmt_ee (GET_RTX_CLASS (code) == 'c' ? code
- : swap_condition (code),
- GET_MODE (x), XEXP (x, 1),
- XEXP (x, 0)), 1);
+ validate_unshare_change (object, loc,
+ gen_rtx_fmt_ee (COMMUTATIVE_ARITH_P (x) ? code
+ : swap_condition (code),
+ GET_MODE (x), XEXP (x, 1),
+ XEXP (x, 0)), 1);
x = *loc;
code = GET_CODE (x);
}
simplify_gen_binary to try to simplify it.
??? We may want later to remove this, once simplification is
separated from this function. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT && XEXP (x, 1) == to)
+ if (CONST_INT_P (XEXP (x, 1)) && XEXP (x, 1) == to)
validate_change (object, loc,
simplify_gen_binary
(PLUS, GET_MODE (x), XEXP (x, 0), XEXP (x, 1)), 1);
break;
case MINUS:
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
|| GET_CODE (XEXP (x, 1)) == CONST_DOUBLE)
validate_change (object, loc,
simplify_gen_binary
case SIGN_EXTEND:
if (GET_MODE (XEXP (x, 0)) == VOIDmode)
{
- new = simplify_gen_unary (code, GET_MODE (x), XEXP (x, 0),
+ new_rtx = simplify_gen_unary (code, GET_MODE (x), XEXP (x, 0),
op0_mode);
/* If any of the above failed, substitute in something that
we know won't be recognized. */
- if (!new)
- new = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
- validate_change (object, loc, new, 1);
+ if (!new_rtx)
+ new_rtx = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ validate_change (object, loc, new_rtx, 1);
}
break;
case SUBREG:
/* All subregs possible to simplify should be simplified. */
- new = simplify_subreg (GET_MODE (x), SUBREG_REG (x), op0_mode,
+ new_rtx = simplify_subreg (GET_MODE (x), SUBREG_REG (x), op0_mode,
SUBREG_BYTE (x));
/* Subregs of VOIDmode operands are incorrect. */
- if (!new && GET_MODE (SUBREG_REG (x)) == VOIDmode)
- new = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
- if (new)
- validate_change (object, loc, new, 1);
+ if (!new_rtx && GET_MODE (SUBREG_REG (x)) == VOIDmode)
+ new_rtx = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
+ if (new_rtx)
+ validate_change (object, loc, new_rtx, 1);
break;
case ZERO_EXTRACT:
case SIGN_EXTRACT:
likely to be an insertion operation; if it was, nothing bad will
happen, we might just fail in some cases). */
- if (GET_CODE (XEXP (x, 0)) == MEM
- && GET_CODE (XEXP (x, 1)) == CONST_INT
- && GET_CODE (XEXP (x, 2)) == CONST_INT
+ if (MEM_P (XEXP (x, 0))
+ && CONST_INT_P (XEXP (x, 1))
+ && CONST_INT_P (XEXP (x, 2))
&& !mode_dependent_address_p (XEXP (XEXP (x, 0), 0))
&& !MEM_VOLATILE_P (XEXP (x, 0)))
{
}
}
+/* Replace every occurrence of FROM in X with TO. Mark each change with
+ validate_change passing OBJECT. */
+
+static void
+validate_replace_rtx_1 (rtx *loc, rtx from, rtx to, rtx object,
+ bool simplify)
+{
+ int i, j;
+ const char *fmt;
+ rtx x = *loc;
+ enum rtx_code code;
+ enum machine_mode op0_mode = VOIDmode;
+ int prev_changes = num_changes;
+
+ if (!x)
+ return;
+
+ code = GET_CODE (x);
+ fmt = GET_RTX_FORMAT (code);
+ if (fmt[0] == 'e')
+ op0_mode = GET_MODE (XEXP (x, 0));
+
+ /* X matches FROM if it is the same rtx or they are both referring to the
+ same register in the same mode. Avoid calling rtx_equal_p unless the
+ operands look similar. */
+
+ if (x == from
+ || (REG_P (x) && REG_P (from)
+ && GET_MODE (x) == GET_MODE (from)
+ && REGNO (x) == REGNO (from))
+ || (GET_CODE (x) == GET_CODE (from) && GET_MODE (x) == GET_MODE (from)
+ && rtx_equal_p (x, from)))
+ {
+ validate_unshare_change (object, loc, to, 1);
+ return;
+ }
+
+ /* Call ourself recursively to perform the replacements.
+ We must not replace inside already replaced expression, otherwise we
+ get infinite recursion for replacements like (reg X)->(subreg (reg X))
+ done by regmove, so we must special case shared ASM_OPERANDS. */
+
+ if (GET_CODE (x) == PARALLEL)
+ {
+ for (j = XVECLEN (x, 0) - 1; j >= 0; j--)
+ {
+ if (j && GET_CODE (XVECEXP (x, 0, j)) == SET
+ && GET_CODE (SET_SRC (XVECEXP (x, 0, j))) == ASM_OPERANDS)
+ {
+ /* Verify that operands are really shared. */
+ gcc_assert (ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP (x, 0, 0)))
+ == ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP
+ (x, 0, j))));
+ validate_replace_rtx_1 (&SET_DEST (XVECEXP (x, 0, j)),
+ from, to, object, simplify);
+ }
+ else
+ validate_replace_rtx_1 (&XVECEXP (x, 0, j), from, to, object,
+ simplify);
+ }
+ }
+ else
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ validate_replace_rtx_1 (&XEXP (x, i), from, to, object, simplify);
+ else if (fmt[i] == 'E')
+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+ validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object,
+ simplify);
+ }
+
+ /* If we didn't substitute, there is nothing more to do. */
+ if (num_changes == prev_changes)
+ return;
+
+ /* Allow substituted expression to have different mode. This is used by
+ regmove to change mode of pseudo register. */
+ if (fmt[0] == 'e' && GET_MODE (XEXP (x, 0)) != VOIDmode)
+ op0_mode = GET_MODE (XEXP (x, 0));
+
+ /* Do changes needed to keep rtx consistent. Don't do any other
+ simplifications, as it is not our job. */
+ if (simplify)
+ simplify_while_replacing (loc, to, object, op0_mode);
+}
+
/* Try replacing every occurrence of FROM in subexpression LOC of INSN
with TO. After all changes have been made, validate by seeing
if INSN is still valid. */
int
validate_replace_rtx_subexp (rtx from, rtx to, rtx insn, rtx *loc)
{
- validate_replace_rtx_1 (loc, from, to, insn);
+ validate_replace_rtx_1 (loc, from, to, insn, true);
return apply_change_group ();
}
int
validate_replace_rtx (rtx from, rtx to, rtx insn)
{
- validate_replace_rtx_1 (&PATTERN (insn), from, to, insn);
+ validate_replace_rtx_1 (&PATTERN (insn), from, to, insn, true);
+ return apply_change_group ();
+}
+
+/* Try replacing every occurrence of FROM in WHERE with TO. Assume that WHERE
+ is a part of INSN. After all changes have been made, validate by seeing if
+ INSN is still valid.
+ validate_replace_rtx (from, to, insn) is equivalent to
+ validate_replace_rtx_part (from, to, &PATTERN (insn), insn). */
+
+int
+validate_replace_rtx_part (rtx from, rtx to, rtx *where, rtx insn)
+{
+ validate_replace_rtx_1 (where, from, to, insn, true);
+ return apply_change_group ();
+}
+
+/* Same as above, but do not simplify rtx afterwards. */
+int
+validate_replace_rtx_part_nosimplify (rtx from, rtx to, rtx *where,
+ rtx insn)
+{
+ validate_replace_rtx_1 (where, from, to, insn, false);
return apply_change_group ();
+
}
/* Try replacing every occurrence of FROM in INSN with TO. */
void
validate_replace_rtx_group (rtx from, rtx to, rtx insn)
{
- validate_replace_rtx_1 (&PATTERN (insn), from, to, insn);
+ validate_replace_rtx_1 (&PATTERN (insn), from, to, insn, true);
}
/* Function called by note_uses to replace used subexpressions. */
struct validate_replace_src_data *d
= (struct validate_replace_src_data *) data;
- validate_replace_rtx_1 (x, d->from, d->to, d->insn);
+ validate_replace_rtx_1 (x, d->from, d->to, d->insn, true);
}
/* Try replacing every occurrence of FROM in INSN with TO, avoiding
note_uses (&PATTERN (insn), validate_replace_src_1, &d);
}
-/* Same as validate_replace_src_group, but validate by seeing if
- INSN is still valid. */
-int
-validate_replace_src (rtx from, rtx to, rtx insn)
+/* Try simplify INSN.
+ Invoke simplify_rtx () on every SET_SRC and SET_DEST inside the INSN's
+ pattern and return true if something was simplified. */
+
+bool
+validate_simplify_insn (rtx insn)
{
- validate_replace_src_group (from, to, insn);
- return apply_change_group ();
+ int i;
+ rtx pat = NULL;
+ rtx newpat = NULL;
+
+ pat = PATTERN (insn);
+
+ if (GET_CODE (pat) == SET)
+ {
+ newpat = simplify_rtx (SET_SRC (pat));
+ if (newpat && !rtx_equal_p (SET_SRC (pat), newpat))
+ validate_change (insn, &SET_SRC (pat), newpat, 1);
+ newpat = simplify_rtx (SET_DEST (pat));
+ if (newpat && !rtx_equal_p (SET_DEST (pat), newpat))
+ validate_change (insn, &SET_DEST (pat), newpat, 1);
+ }
+ else if (GET_CODE (pat) == PARALLEL)
+ for (i = 0; i < XVECLEN (pat, 0); i++)
+ {
+ rtx s = XVECEXP (pat, 0, i);
+
+ if (GET_CODE (XVECEXP (pat, 0, i)) == SET)
+ {
+ newpat = simplify_rtx (SET_SRC (s));
+ if (newpat && !rtx_equal_p (SET_SRC (s), newpat))
+ validate_change (insn, &SET_SRC (s), newpat, 1);
+ newpat = simplify_rtx (SET_DEST (s));
+ if (newpat && !rtx_equal_p (SET_DEST (s), newpat))
+ validate_change (insn, &SET_DEST (s), newpat, 1);
+ }
+ }
+ return ((num_changes_pending () > 0) && (apply_change_group () > 0));
}
\f
#ifdef HAVE_cc0
if (next == 0)
return 0;
- return ((GET_CODE (next) == JUMP_INSN
- || GET_CODE (next) == INSN
- || GET_CODE (next) == CALL_INSN)
+ return (INSN_P (next)
&& ! inequality_comparisons_p (PATTERN (next)));
}
#endif
\f
-/* This is used by find_single_use to locate an rtx that contains exactly one
- use of DEST, which is typically either a REG or CC0. It returns a
- pointer to the innermost rtx expression containing DEST. Appearances of
- DEST that are being used to totally replace it are not counted. */
-
-static rtx *
-find_single_use_1 (rtx dest, rtx *loc)
-{
- rtx x = *loc;
- enum rtx_code code = GET_CODE (x);
- rtx *result = 0;
- rtx *this_result;
- int i;
- const char *fmt;
-
- switch (code)
- {
- case CONST_INT:
- case CONST:
- case LABEL_REF:
- case SYMBOL_REF:
- case CONST_DOUBLE:
- case CONST_VECTOR:
- case CLOBBER:
- return 0;
-
- case SET:
- /* If the destination is anything other than CC0, PC, a REG or a SUBREG
- of a REG that occupies all of the REG, the insn uses DEST if
- it is mentioned in the destination or the source. Otherwise, we
- need just check the source. */
- if (GET_CODE (SET_DEST (x)) != CC0
- && GET_CODE (SET_DEST (x)) != PC
- && GET_CODE (SET_DEST (x)) != REG
- && ! (GET_CODE (SET_DEST (x)) == SUBREG
- && GET_CODE (SUBREG_REG (SET_DEST (x))) == REG
- && (((GET_MODE_SIZE (GET_MODE (SUBREG_REG (SET_DEST (x))))
- + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
- == ((GET_MODE_SIZE (GET_MODE (SET_DEST (x)))
- + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))))
- break;
-
- return find_single_use_1 (dest, &SET_SRC (x));
-
- case MEM:
- case SUBREG:
- return find_single_use_1 (dest, &XEXP (x, 0));
-
- default:
- break;
- }
-
- /* If it wasn't one of the common cases above, check each expression and
- vector of this code. Look for a unique usage of DEST. */
-
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- {
- if (fmt[i] == 'e')
- {
- if (dest == XEXP (x, i)
- || (GET_CODE (dest) == REG && GET_CODE (XEXP (x, i)) == REG
- && REGNO (dest) == REGNO (XEXP (x, i))))
- this_result = loc;
- else
- this_result = find_single_use_1 (dest, &XEXP (x, i));
-
- if (result == 0)
- result = this_result;
- else if (this_result)
- /* Duplicate usage. */
- return 0;
- }
- else if (fmt[i] == 'E')
- {
- int j;
-
- for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- {
- if (XVECEXP (x, i, j) == dest
- || (GET_CODE (dest) == REG
- && GET_CODE (XVECEXP (x, i, j)) == REG
- && REGNO (XVECEXP (x, i, j)) == REGNO (dest)))
- this_result = loc;
- else
- this_result = find_single_use_1 (dest, &XVECEXP (x, i, j));
-
- if (result == 0)
- result = this_result;
- else if (this_result)
- return 0;
- }
- }
- }
-
- return result;
-}
-\f
-/* See if DEST, produced in INSN, is used only a single time in the
- sequel. If so, return a pointer to the innermost rtx expression in which
- it is used.
-
- If PLOC is nonzero, *PLOC is set to the insn containing the single use.
-
- This routine will return usually zero either before flow is called (because
- there will be no LOG_LINKS notes) or after reload (because the REG_DEAD
- note can't be trusted).
-
- If DEST is cc0_rtx, we look only at the next insn. In that case, we don't
- care about REG_DEAD notes or LOG_LINKS.
-
- Otherwise, we find the single use by finding an insn that has a
- LOG_LINKS pointing at INSN and has a REG_DEAD note for DEST. If DEST is
- only referenced once in that insn, we know that it must be the first
- and last insn referencing DEST. */
-
-rtx *
-find_single_use (rtx dest, rtx insn, rtx *ploc)
-{
- rtx next;
- rtx *result;
- rtx link;
-
-#ifdef HAVE_cc0
- if (dest == cc0_rtx)
- {
- next = NEXT_INSN (insn);
- if (next == 0
- || (GET_CODE (next) != INSN && GET_CODE (next) != JUMP_INSN))
- return 0;
-
- result = find_single_use_1 (dest, &PATTERN (next));
- if (result && ploc)
- *ploc = next;
- return result;
- }
-#endif
-
- if (reload_completed || reload_in_progress || GET_CODE (dest) != REG)
- return 0;
-
- for (next = next_nonnote_insn (insn);
- next != 0 && GET_CODE (next) != CODE_LABEL;
- next = next_nonnote_insn (next))
- if (INSN_P (next) && dead_or_set_p (next, dest))
- {
- for (link = LOG_LINKS (next); link; link = XEXP (link, 1))
- if (XEXP (link, 0) == insn)
- break;
-
- if (link)
- {
- result = find_single_use_1 (dest, &PATTERN (next));
- if (ploc)
- *ploc = next;
- return result;
- }
- }
-
- return 0;
-}
-\f
/* Return 1 if OP is a valid general operand for machine mode MODE.
This is either a register reference, a memory reference,
or a constant. In the case of a memory reference, the address
&& GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
return 0;
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& mode != VOIDmode
&& trunc_int_for_mode (INTVAL (op), mode) != INTVAL (op))
return 0;
if (CONSTANT_P (op))
return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode
|| mode == VOIDmode)
-#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
&& LEGITIMATE_CONSTANT_P (op));
/* Except for certain constants with VOIDmode, already checked for,
#ifdef INSN_SCHEDULING
/* On machines that have insn scheduling, we want all memory
- reference to be explicit, so outlaw paradoxical SUBREGs. */
- if (GET_CODE (sub) == MEM
+ reference to be explicit, so outlaw paradoxical SUBREGs.
+ However, we must allow them after reload so that they can
+ get cleaned up by cleanup_subreg_operands. */
+ if (!reload_completed && MEM_P (sub)
&& GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (sub)))
return 0;
#endif
??? This is a kludge. */
if (!reload_completed && SUBREG_BYTE (op) != 0
- && GET_CODE (sub) == MEM)
+ && MEM_P (sub))
return 0;
/* FLOAT_MODE subregs can't be paradoxical. Combine will occasionally
create such rtl, and we must reject it. */
- if (GET_MODE_CLASS (GET_MODE (op)) == MODE_FLOAT
+ if (SCALAR_FLOAT_MODE_P (GET_MODE (op))
&& GET_MODE_SIZE (GET_MODE (op)) > GET_MODE_SIZE (GET_MODE (sub)))
return 0;
if (! volatile_ok && MEM_VOLATILE_P (op))
return 0;
- if (GET_CODE (y) == ADDRESSOF)
- return 1;
-
/* Use the mem's mode, since it will be reloaded thus. */
- mode = GET_MODE (op);
- GO_IF_LEGITIMATE_ADDRESS (mode, y, win);
+ if (memory_address_addr_space_p (GET_MODE (op), y, MEM_ADDR_SPACE (op)))
+ return 1;
}
- /* Pretend this is an operand for now; we'll run force_operand
- on its replacement in fixup_var_refs_1. */
- if (code == ADDRESSOF)
- return 1;
-
return 0;
-
- win:
- return 1;
}
\f
/* Return 1 if OP is a valid memory address for a memory reference
(Ideally, (SUBREG (MEM)...) should not exist after reload,
but currently it does result from (SUBREG (REG)...) where the
reg went on the stack.) */
- if (! reload_completed && GET_CODE (sub) == MEM)
+ if (! reload_completed && MEM_P (sub))
return general_operand (op, mode);
#ifdef CANNOT_CHANGE_MODE_CLASS
- if (GET_CODE (sub) == REG
+ if (REG_P (sub)
&& REGNO (sub) < FIRST_PSEUDO_REGISTER
&& REG_CANNOT_CHANGE_MODE_P (REGNO (sub), GET_MODE (sub), mode)
&& GET_MODE_CLASS (GET_MODE (sub)) != MODE_COMPLEX_INT
/* FLOAT_MODE subregs can't be paradoxical. Combine will occasionally
create such rtl, and we must reject it. */
- if (GET_MODE_CLASS (GET_MODE (op)) == MODE_FLOAT
+ if (SCALAR_FLOAT_MODE_P (GET_MODE (op))
&& GET_MODE_SIZE (GET_MODE (op)) > GET_MODE_SIZE (GET_MODE (sub)))
return 0;
op = sub;
}
- /* If we have an ADDRESSOF, consider it valid since it will be
- converted into something that will not be a MEM. */
- if (GET_CODE (op) == ADDRESSOF)
- return 1;
-
/* We don't consider registers whose class is NO_REGS
to be a register operand. */
- return (GET_CODE (op) == REG
+ return (REG_P (op)
&& (REGNO (op) >= FIRST_PSEUDO_REGISTER
|| REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
}
return 0;
return (GET_CODE (op) == SCRATCH
- || (GET_CODE (op) == REG
+ || (REG_P (op)
&& REGNO (op) < FIRST_PSEUDO_REGISTER));
}
&& GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
return 0;
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& mode != VOIDmode
&& trunc_int_for_mode (INTVAL (op), mode) != INTVAL (op))
return 0;
- /* Accept CONSTANT_P_RTX, since it will be gone by CSE1 and
- result in 0/1. It seems a safe assumption that this is
- in range for everyone. */
- if (GET_CODE (op) == CONSTANT_P_RTX)
- return 1;
-
return (CONSTANT_P (op)
&& (GET_MODE (op) == mode || mode == VOIDmode
|| GET_MODE (op) == VOIDmode)
-#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
&& LEGITIMATE_CONSTANT_P (op));
}
int
const_int_operand (rtx op, enum machine_mode mode)
{
- if (GET_CODE (op) != CONST_INT)
+ if (!CONST_INT_P (op))
return 0;
if (mode != VOIDmode
&& GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
return 0;
- return ((GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_INT)
+ return ((GET_CODE (op) == CONST_DOUBLE || CONST_INT_P (op))
&& (mode == VOIDmode || GET_MODE (op) == mode
|| GET_MODE (op) == VOIDmode));
}
&& GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
return 0;
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& mode != VOIDmode
&& trunc_int_for_mode (INTVAL (op), mode) != INTVAL (op))
return 0;
return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode
|| mode == VOIDmode)
-#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
&& LEGITIMATE_CONSTANT_P (op));
}
(Ideally, (SUBREG (MEM)...) should not exist after reload,
but currently it does result from (SUBREG (REG)...) where the
reg went on the stack.) */
- if (! reload_completed && GET_CODE (SUBREG_REG (op)) == MEM)
+ if (! reload_completed && MEM_P (SUBREG_REG (op)))
return general_operand (op, mode);
op = SUBREG_REG (op);
}
/* We don't consider registers whose class is NO_REGS
to be a register operand. */
- return (GET_CODE (op) == REG
+ return (REG_P (op)
&& (REGNO (op) >= FIRST_PSEUDO_REGISTER
|| REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
}
rounded_size = PUSH_ROUNDING (rounded_size);
#endif
- if (GET_CODE (op) != MEM)
+ if (!MEM_P (op))
return 0;
if (mode != VOIDmode && GET_MODE (op) != mode)
if (GET_CODE (op) != PRE_MODIFY
|| GET_CODE (XEXP (op, 1)) != PLUS
|| XEXP (XEXP (op, 1), 0) != XEXP (op, 0)
- || GET_CODE (XEXP (XEXP (op, 1), 1)) != CONST_INT
+ || !CONST_INT_P (XEXP (XEXP (op, 1), 1))
#ifdef STACK_GROWS_DOWNWARD
|| INTVAL (XEXP (XEXP (op, 1), 1)) != - (int) rounded_size
#else
int
pop_operand (rtx op, enum machine_mode mode)
{
- if (GET_CODE (op) != MEM)
+ if (!MEM_P (op))
return 0;
if (mode != VOIDmode && GET_MODE (op) != mode)
return XEXP (op, 0) == stack_pointer_rtx;
}
-/* Return 1 if ADDR is a valid memory address for mode MODE. */
+/* Return 1 if ADDR is a valid memory address
+ for mode MODE in address space AS. */
int
-memory_address_p (enum machine_mode mode ATTRIBUTE_UNUSED, rtx addr)
+memory_address_addr_space_p (enum machine_mode mode ATTRIBUTE_UNUSED,
+ rtx addr, addr_space_t as)
{
- if (GET_CODE (addr) == ADDRESSOF)
- return 1;
-
+#ifdef GO_IF_LEGITIMATE_ADDRESS
+ gcc_assert (ADDR_SPACE_GENERIC_P (as));
GO_IF_LEGITIMATE_ADDRESS (mode, addr, win);
return 0;
win:
return 1;
+#else
+ return targetm.addr_space.legitimate_address_p (mode, addr, 0, as);
+#endif
}
/* Return 1 if OP is a valid memory reference with mode MODE,
if (! reload_completed)
/* Note that no SUBREG is a memory operand before end of reload pass,
because (SUBREG (MEM...)) forces reloading into a register. */
- return GET_CODE (op) == MEM && general_operand (op, mode);
+ return MEM_P (op) && general_operand (op, mode);
if (mode != VOIDmode && GET_MODE (op) != mode)
return 0;
if (GET_CODE (inner) == SUBREG)
inner = SUBREG_REG (inner);
- return (GET_CODE (inner) == MEM && general_operand (op, mode));
+ return (MEM_P (inner) && general_operand (op, mode));
}
/* Return 1 if OP is a valid indirect memory reference with mode MODE;
{
/* Before reload, a SUBREG isn't in memory (see memory_operand, above). */
if (! reload_completed
- && GET_CODE (op) == SUBREG && GET_CODE (SUBREG_REG (op)) == MEM)
+ && GET_CODE (op) == SUBREG && MEM_P (SUBREG_REG (op)))
{
int offset = SUBREG_BYTE (op);
rtx inner = SUBREG_REG (op);
return ((offset == 0 && general_operand (XEXP (inner, 0), Pmode))
|| (GET_CODE (XEXP (inner, 0)) == PLUS
- && GET_CODE (XEXP (XEXP (inner, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (inner, 0), 1))
&& INTVAL (XEXP (XEXP (inner, 0), 1)) == -offset
&& general_operand (XEXP (XEXP (inner, 0), 0), Pmode)));
}
- return (GET_CODE (op) == MEM
+ return (MEM_P (op)
&& memory_operand (op, mode)
&& general_operand (XEXP (op, 0), Pmode));
}
+/* Return 1 if this is an ordered comparison operator (not including
+ ORDERED and UNORDERED). */
+
+int
+ordered_comparison_operator (rtx op, enum machine_mode mode)
+{
+ if (mode != VOIDmode && GET_MODE (op) != mode)
+ return false;
+ switch (GET_CODE (op))
+ {
+ case EQ:
+ case NE:
+ case LT:
+ case LTU:
+ case LE:
+ case LEU:
+ case GT:
+ case GTU:
+ case GE:
+ case GEU:
+ return true;
+ default:
+ return false;
+ }
+}
+
/* Return 1 if this is a comparison operator. This allows the use of
MATCH_OPERATOR to recognize all the branch insns. */
comparison_operator (rtx op, enum machine_mode mode)
{
return ((mode == VOIDmode || GET_MODE (op) == mode)
- && GET_RTX_CLASS (GET_CODE (op)) == '<');
+ && COMPARISON_P (op));
}
\f
-/* If BODY is an insn body that uses ASM_OPERANDS,
- return the number of operands (both input and output) in the insn.
- Otherwise return -1. */
+/* If BODY is an insn body that uses ASM_OPERANDS, return it. */
-int
-asm_noperands (rtx body)
+rtx
+extract_asm_operands (rtx body)
{
+ rtx tmp;
switch (GET_CODE (body))
{
case ASM_OPERANDS:
- /* No output operands: return number of input operands. */
- return ASM_OPERANDS_INPUT_LENGTH (body);
+ return body;
+
case SET:
- if (GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
- /* Single output operand: BODY is (set OUTPUT (asm_operands ...)). */
- return ASM_OPERANDS_INPUT_LENGTH (SET_SRC (body)) + 1;
- else
- return -1;
+ /* Single output operand: BODY is (set OUTPUT (asm_operands ...)). */
+ tmp = SET_SRC (body);
+ if (GET_CODE (tmp) == ASM_OPERANDS)
+ return tmp;
+ break;
+
case PARALLEL:
- if (GET_CODE (XVECEXP (body, 0, 0)) == SET
- && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) == ASM_OPERANDS)
+ tmp = XVECEXP (body, 0, 0);
+ if (GET_CODE (tmp) == ASM_OPERANDS)
+ return tmp;
+ if (GET_CODE (tmp) == SET)
{
- /* Multiple output operands, or 1 output plus some clobbers:
- body is [(set OUTPUT (asm_operands ...))... (clobber (reg ...))...]. */
- int i;
- int n_sets;
+ tmp = SET_SRC (tmp);
+ if (GET_CODE (tmp) == ASM_OPERANDS)
+ return tmp;
+ }
+ break;
+ default:
+ break;
+ }
+ return NULL;
+}
+
+/* If BODY is an insn body that uses ASM_OPERANDS,
+ return the number of operands (both input and output) in the insn.
+ Otherwise return -1. */
+
+int
+asm_noperands (const_rtx body)
+{
+ rtx asm_op = extract_asm_operands (CONST_CAST_RTX (body));
+ int n_sets = 0;
+
+ if (asm_op == NULL)
+ return -1;
+
+ if (GET_CODE (body) == SET)
+ n_sets = 1;
+ else if (GET_CODE (body) == PARALLEL)
+ {
+ int i;
+ if (GET_CODE (XVECEXP (body, 0, 0)) == SET)
+ {
+ /* Multiple output operands, or 1 output plus some clobbers:
+ body is
+ [(set OUTPUT (asm_operands ...))... (clobber (reg ...))...]. */
/* Count backwards through CLOBBERs to determine number of SETs. */
for (i = XVECLEN (body, 0); i > 0; i--)
{
/* If these ASM_OPERANDS rtx's came from different original insns
then they aren't allowed together. */
if (ASM_OPERANDS_INPUT_VEC (SET_SRC (elt))
- != ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP (body, 0, 0))))
+ != ASM_OPERANDS_INPUT_VEC (asm_op))
return -1;
}
- return (ASM_OPERANDS_INPUT_LENGTH (SET_SRC (XVECEXP (body, 0, 0)))
- + n_sets);
}
- else if (GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
+ else
{
/* 0 outputs, but some clobbers:
body is [(asm_operands ...) (clobber (reg ...))...]. */
- int i;
-
/* Make sure all the other parallel things really are clobbers. */
for (i = XVECLEN (body, 0) - 1; i > 0; i--)
if (GET_CODE (XVECEXP (body, 0, i)) != CLOBBER)
return -1;
-
- return ASM_OPERANDS_INPUT_LENGTH (XVECEXP (body, 0, 0));
}
- else
- return -1;
- default:
- return -1;
}
+
+ return (ASM_OPERANDS_INPUT_LENGTH (asm_op)
+ + ASM_OPERANDS_LABEL_LENGTH (asm_op) + n_sets);
}
/* Assuming BODY is an insn body that uses ASM_OPERANDS,
const char *
decode_asm_operands (rtx body, rtx *operands, rtx **operand_locs,
- const char **constraints, enum machine_mode *modes)
+ const char **constraints, enum machine_mode *modes,
+ location_t *loc)
{
- int i;
- int noperands;
- const char *template = 0;
+ int nbase = 0, n, i;
+ rtx asmop;
- if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
+ switch (GET_CODE (body))
{
- rtx asmop = SET_SRC (body);
- /* Single output operand: BODY is (set OUTPUT (asm_operands ....)). */
-
- noperands = ASM_OPERANDS_INPUT_LENGTH (asmop) + 1;
+ case ASM_OPERANDS:
+ /* Zero output asm: BODY is (asm_operands ...). */
+ asmop = body;
+ break;
- for (i = 1; i < noperands; i++)
- {
- if (operand_locs)
- operand_locs[i] = &ASM_OPERANDS_INPUT (asmop, i - 1);
- if (operands)
- operands[i] = ASM_OPERANDS_INPUT (asmop, i - 1);
- if (constraints)
- constraints[i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i - 1);
- if (modes)
- modes[i] = ASM_OPERANDS_INPUT_MODE (asmop, i - 1);
- }
+ case SET:
+ /* Single output asm: BODY is (set OUTPUT (asm_operands ...)). */
+ asmop = SET_SRC (body);
/* The output is in the SET.
Its constraint is in the ASM_OPERANDS itself. */
if (constraints)
constraints[0] = ASM_OPERANDS_OUTPUT_CONSTRAINT (asmop);
if (modes)
- modes[0] = GET_MODE (SET_DEST (body));
- template = ASM_OPERANDS_TEMPLATE (asmop);
- }
- else if (GET_CODE (body) == ASM_OPERANDS)
- {
- rtx asmop = body;
- /* No output operands: BODY is (asm_operands ....). */
-
- noperands = ASM_OPERANDS_INPUT_LENGTH (asmop);
-
- /* The input operands are found in the 1st element vector. */
- /* Constraints for inputs are in the 2nd element vector. */
- for (i = 0; i < noperands; i++)
- {
- if (operand_locs)
- operand_locs[i] = &ASM_OPERANDS_INPUT (asmop, i);
- if (operands)
- operands[i] = ASM_OPERANDS_INPUT (asmop, i);
- if (constraints)
- constraints[i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
- if (modes)
- modes[i] = ASM_OPERANDS_INPUT_MODE (asmop, i);
- }
- template = ASM_OPERANDS_TEMPLATE (asmop);
- }
- else if (GET_CODE (body) == PARALLEL
- && GET_CODE (XVECEXP (body, 0, 0)) == SET
- && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) == ASM_OPERANDS)
- {
- rtx asmop = SET_SRC (XVECEXP (body, 0, 0));
- int nparallel = XVECLEN (body, 0); /* Includes CLOBBERs. */
- int nin = ASM_OPERANDS_INPUT_LENGTH (asmop);
- int nout = 0; /* Does not include CLOBBERs. */
-
- /* At least one output, plus some CLOBBERs. */
+ modes[0] = GET_MODE (SET_DEST (body));
+ nbase = 1;
+ break;
- /* The outputs are in the SETs.
- Their constraints are in the ASM_OPERANDS itself. */
- for (i = 0; i < nparallel; i++)
- {
- if (GET_CODE (XVECEXP (body, 0, i)) == CLOBBER)
- break; /* Past last SET */
+ case PARALLEL:
+ {
+ int nparallel = XVECLEN (body, 0); /* Includes CLOBBERs. */
- if (operands)
- operands[i] = SET_DEST (XVECEXP (body, 0, i));
- if (operand_locs)
- operand_locs[i] = &SET_DEST (XVECEXP (body, 0, i));
- if (constraints)
- constraints[i] = XSTR (SET_SRC (XVECEXP (body, 0, i)), 1);
- if (modes)
- modes[i] = GET_MODE (SET_DEST (XVECEXP (body, 0, i)));
- nout++;
- }
+ asmop = XVECEXP (body, 0, 0);
+ if (GET_CODE (asmop) == SET)
+ {
+ asmop = SET_SRC (asmop);
- for (i = 0; i < nin; i++)
- {
- if (operand_locs)
- operand_locs[i + nout] = &ASM_OPERANDS_INPUT (asmop, i);
- if (operands)
- operands[i + nout] = ASM_OPERANDS_INPUT (asmop, i);
- if (constraints)
- constraints[i + nout] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
- if (modes)
- modes[i + nout] = ASM_OPERANDS_INPUT_MODE (asmop, i);
- }
+ /* At least one output, plus some CLOBBERs. The outputs are in
+ the SETs. Their constraints are in the ASM_OPERANDS itself. */
+ for (i = 0; i < nparallel; i++)
+ {
+ if (GET_CODE (XVECEXP (body, 0, i)) == CLOBBER)
+ break; /* Past last SET */
+ if (operands)
+ operands[i] = SET_DEST (XVECEXP (body, 0, i));
+ if (operand_locs)
+ operand_locs[i] = &SET_DEST (XVECEXP (body, 0, i));
+ if (constraints)
+ constraints[i] = XSTR (SET_SRC (XVECEXP (body, 0, i)), 1);
+ if (modes)
+ modes[i] = GET_MODE (SET_DEST (XVECEXP (body, 0, i)));
+ }
+ nbase = i;
+ }
+ break;
+ }
- template = ASM_OPERANDS_TEMPLATE (asmop);
+ default:
+ gcc_unreachable ();
}
- else if (GET_CODE (body) == PARALLEL
- && GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
- {
- /* No outputs, but some CLOBBERs. */
- rtx asmop = XVECEXP (body, 0, 0);
- int nin = ASM_OPERANDS_INPUT_LENGTH (asmop);
-
- for (i = 0; i < nin; i++)
- {
- if (operand_locs)
- operand_locs[i] = &ASM_OPERANDS_INPUT (asmop, i);
- if (operands)
- operands[i] = ASM_OPERANDS_INPUT (asmop, i);
- if (constraints)
- constraints[i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
- if (modes)
- modes[i] = ASM_OPERANDS_INPUT_MODE (asmop, i);
- }
+ n = ASM_OPERANDS_INPUT_LENGTH (asmop);
+ for (i = 0; i < n; i++)
+ {
+ if (operand_locs)
+ operand_locs[nbase + i] = &ASM_OPERANDS_INPUT (asmop, i);
+ if (operands)
+ operands[nbase + i] = ASM_OPERANDS_INPUT (asmop, i);
+ if (constraints)
+ constraints[nbase + i] = ASM_OPERANDS_INPUT_CONSTRAINT (asmop, i);
+ if (modes)
+ modes[nbase + i] = ASM_OPERANDS_INPUT_MODE (asmop, i);
+ }
+ nbase += n;
- template = ASM_OPERANDS_TEMPLATE (asmop);
+ n = ASM_OPERANDS_LABEL_LENGTH (asmop);
+ for (i = 0; i < n; i++)
+ {
+ if (operand_locs)
+ operand_locs[nbase + i] = &ASM_OPERANDS_LABEL (asmop, i);
+ if (operands)
+ operands[nbase + i] = ASM_OPERANDS_LABEL (asmop, i);
+ if (constraints)
+ constraints[nbase + i] = "";
+ if (modes)
+ modes[nbase + i] = Pmode;
}
- return template;
+ if (loc)
+ *loc = ASM_OPERANDS_SOURCE_LOCATION (asmop);
+
+ return ASM_OPERANDS_TEMPLATE (asmop);
}
-/* Check if an asm_operand matches it's constraints.
+/* Check if an asm_operand matches its constraints.
Return > 0 if ok, = 0 if bad, < 0 if inconclusive. */
int
-asm_operand_ok (rtx op, const char *constraint)
+asm_operand_ok (rtx op, const char *constraint, const char **constraints)
{
int result = 0;
/* Use constrain_operands after reload. */
- if (reload_completed)
- abort ();
+ gcc_assert (!reload_completed);
+
+ /* Empty constraint string is the same as "X,...,X", i.e. X for as
+ many alternatives as required to match the other operands. */
+ if (*constraint == '\0')
+ return 1;
while (*constraint)
{
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
- /* For best results, our caller should have given us the
- proper matching constraint, but we can't actually fail
- the check if they didn't. Indicate that results are
- inconclusive. */
- do
- constraint++;
- while (ISDIGIT (*constraint));
- if (! result)
- result = -1;
+ /* If caller provided constraints pointer, look up
+ the maching constraint. Otherwise, our caller should have
+ given us the proper matching constraint, but we can't
+ actually fail the check if they didn't. Indicate that
+ results are inconclusive. */
+ if (constraints)
+ {
+ char *end;
+ unsigned long match;
+
+ match = strtoul (constraint, &end, 10);
+ if (!result)
+ result = asm_operand_ok (op, constraints[match], NULL);
+ constraint = (const char *) end;
+ }
+ else
+ {
+ do
+ constraint++;
+ while (ISDIGIT (*constraint));
+ if (! result)
+ result = -1;
+ }
continue;
case 'p':
result = 1;
break;
- case 'm':
+ case TARGET_MEM_CONSTRAINT:
case 'V': /* non-offsettable */
if (memory_operand (op, VOIDmode))
result = 1;
break;
case '<':
- /* ??? Before flow, auto inc/dec insns are not supposed to exist,
+ /* ??? Before auto-inc-dec, auto inc/dec insns are not supposed to exist,
excepting those that expand_call created. Further, on some
machines which do not have generalized auto inc/dec, an inc/dec
is not a memory_operand.
Match any memory and hope things are resolved after reload. */
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (1
|| GET_CODE (XEXP (op, 0)) == PRE_DEC
|| GET_CODE (XEXP (op, 0)) == POST_DEC))
break;
case '>':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (1
|| GET_CODE (XEXP (op, 0)) == PRE_INC
|| GET_CODE (XEXP (op, 0)) == POST_INC))
break;
case 's':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
break;
- /* FALLTHRU */
+ /* Fall through. */
case 'i':
- if (CONSTANT_P (op)
-#ifdef LEGITIMATE_PIC_OPERAND_P
- && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
- )
+ if (CONSTANT_P (op) && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op)))
result = 1;
break;
case 'n':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
result = 1;
break;
case 'I':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'I', constraint))
result = 1;
break;
case 'J':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'J', constraint))
result = 1;
break;
case 'K':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'K', constraint))
result = 1;
break;
case 'L':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'L', constraint))
result = 1;
break;
case 'M':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'M', constraint))
result = 1;
break;
case 'N':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'N', constraint))
result = 1;
break;
case 'O':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'O', constraint))
result = 1;
break;
case 'P':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), 'P', constraint))
result = 1;
break;
result = 1;
}
#ifdef EXTRA_CONSTRAINT_STR
+ else if (EXTRA_MEMORY_CONSTRAINT (c, constraint))
+ /* Every memory operand can be reloaded to fit. */
+ result = result || memory_operand (op, VOIDmode);
+ else if (EXTRA_ADDRESS_CONSTRAINT (c, constraint))
+ /* Every address operand can be reloaded to fit. */
+ result = result || address_operand (op, VOIDmode);
else if (EXTRA_CONSTRAINT_STR (op, c, constraint))
result = 1;
- else if (EXTRA_MEMORY_CONSTRAINT (c, constraint)
- /* Every memory operand can be reloaded to fit. */
- && memory_operand (op, VOIDmode))
- result = 1;
- else if (EXTRA_ADDRESS_CONSTRAINT (c, constraint)
- /* Every address operand can be reloaded to fit. */
- && address_operand (op, VOIDmode))
- result = 1;
#endif
break;
}
int
offsettable_memref_p (rtx op)
{
- return ((GET_CODE (op) == MEM)
- && offsettable_address_p (1, GET_MODE (op), XEXP (op, 0)));
+ return ((MEM_P (op))
+ && offsettable_address_addr_space_p (1, GET_MODE (op), XEXP (op, 0),
+ MEM_ADDR_SPACE (op)));
}
/* Similar, but don't require a strictly valid mem ref:
int
offsettable_nonstrict_memref_p (rtx op)
{
- return ((GET_CODE (op) == MEM)
- && offsettable_address_p (0, GET_MODE (op), XEXP (op, 0)));
+ return ((MEM_P (op))
+ && offsettable_address_addr_space_p (0, GET_MODE (op), XEXP (op, 0),
+ MEM_ADDR_SPACE (op)));
}
/* Return 1 if Y is a memory address which contains no side effects
- and would remain valid after the addition of a positive integer
- less than the size of that mode.
+ and would remain valid for address space AS after the addition of
+ a positive integer less than the size of that mode.
We assume that the original address is valid and do not check it.
We do check that it is valid for narrower modes.
for the sake of use in reload.c. */
int
-offsettable_address_p (int strictp, enum machine_mode mode, rtx y)
+offsettable_address_addr_space_p (int strictp, enum machine_mode mode, rtx y,
+ addr_space_t as)
{
enum rtx_code ycode = GET_CODE (y);
rtx z;
rtx y1 = y;
rtx *y2;
- int (*addressp) (enum machine_mode, rtx) =
- (strictp ? strict_memory_address_p : memory_address_p);
+ int (*addressp) (enum machine_mode, rtx, addr_space_t) =
+ (strictp ? strict_memory_address_addr_space_p
+ : memory_address_addr_space_p);
unsigned int mode_sz = GET_MODE_SIZE (mode);
if (CONSTANT_ADDRESS_P (y))
*y2 = plus_constant (*y2, mode_sz - 1);
/* Use QImode because an odd displacement may be automatically invalid
for any wider mode. But it should be valid for a single byte. */
- good = (*addressp) (QImode, y);
+ good = (*addressp) (QImode, y, as);
/* In any case, restore old contents of memory. */
*y2 = y1;
return good;
}
- if (GET_RTX_CLASS (ycode) == 'a')
+ if (GET_RTX_CLASS (ycode) == RTX_AUTOINC)
return 0;
/* The offset added here is chosen as the maximum offset that
/* Use QImode because an odd displacement may be automatically invalid
for any wider mode. But it should be valid for a single byte. */
- return (*addressp) (QImode, z);
+ return (*addressp) (QImode, z, as);
}
/* Return 1 if ADDR is an address-expression whose effect depends
because the amount of the increment depends on the mode. */
int
-mode_dependent_address_p (rtx addr ATTRIBUTE_UNUSED /* Maybe used in GO_IF_MODE_DEPENDENT_ADDRESS. */)
-{
+mode_dependent_address_p (rtx addr)
+{
+ /* Auto-increment addressing with anything other than post_modify
+ or pre_modify always introduces a mode dependency. Catch such
+ cases now instead of deferring to the target. */
+ if (GET_CODE (addr) == PRE_INC
+ || GET_CODE (addr) == POST_INC
+ || GET_CODE (addr) == PRE_DEC
+ || GET_CODE (addr) == POST_DEC)
+ return 1;
+
GO_IF_MODE_DEPENDENT_ADDRESS (addr, win);
return 0;
/* Label `win' might (not) be used via GO_IF_MODE_DEPENDENT_ADDRESS. */
extract_insn (insn);
recog_data.insn = insn;
}
+
/* Do cached extract_insn, constrain_operands and complain about failures.
Used by insn_attrtab. */
void
&& !constrain_operands (reload_completed))
fatal_insn_not_found (insn);
}
+
/* Do cached constrain_operands and complain about failures. */
int
constrain_operands_cached (int strict)
int noperands;
rtx body = PATTERN (insn);
- recog_data.insn = NULL;
recog_data.n_operands = 0;
recog_data.n_alternatives = 0;
recog_data.n_dups = 0;
- which_alternative = -1;
switch (GET_CODE (body))
{
case ASM_INPUT:
case ADDR_VEC:
case ADDR_DIFF_VEC:
+ case VAR_LOCATION:
return;
case SET:
/* This insn is an `asm' with operands. */
/* expand_asm_operands makes sure there aren't too many operands. */
- if (noperands > MAX_RECOG_OPERANDS)
- abort ();
+ gcc_assert (noperands <= MAX_RECOG_OPERANDS);
/* Now get the operand values and constraints out of the insn. */
decode_asm_operands (body, recog_data.operand,
recog_data.operand_loc,
recog_data.constraints,
- recog_data.operand_mode);
+ recog_data.operand_mode, NULL);
if (noperands > 0)
{
const char *p = recog_data.constraints[0];
: recog_data.constraints[i][0] == '+' ? OP_INOUT
: OP_IN);
- if (recog_data.n_alternatives > MAX_RECOG_ALTERNATIVES)
- abort ();
+ gcc_assert (recog_data.n_alternatives <= MAX_RECOG_ALTERNATIVES);
+
+ if (INSN_CODE (insn) < 0)
+ for (i = 0; i < recog_data.n_alternatives; i++)
+ recog_data.alternative_enabled_p[i] = true;
+ else
+ {
+ recog_data.insn = insn;
+ for (i = 0; i < recog_data.n_alternatives; i++)
+ {
+ which_alternative = i;
+ recog_data.alternative_enabled_p[i] = get_attr_enabled (insn);
+ }
+ }
+
+ recog_data.insn = NULL;
+ which_alternative = -1;
}
/* After calling extract_insn, you can use this function to extract some
for (j = 0; j < recog_data.n_alternatives; j++)
{
- op_alt[j].class = NO_REGS;
+ op_alt[j].cl = NO_REGS;
op_alt[j].constraint = p;
op_alt[j].matches = -1;
op_alt[j].matched = -1;
+ if (!recog_data.alternative_enabled_p[j])
+ {
+ p = skip_alternative (p);
+ continue;
+ }
+
if (*p == '\0' || *p == ',')
{
op_alt[j].anything_ok = 1;
}
continue;
- case 'm':
+ case TARGET_MEM_CONSTRAINT:
op_alt[j].memory_ok = 1;
break;
case '<':
case 'p':
op_alt[j].is_address = 1;
- op_alt[j].class = reg_class_subunion[(int) op_alt[j].class]
- [(int) MODE_BASE_REG_CLASS (VOIDmode)];
+ op_alt[j].cl = reg_class_subunion[(int) op_alt[j].cl]
+ [(int) base_reg_class (VOIDmode, ADDRESS, SCRATCH)];
break;
- case 'g': case 'r':
- op_alt[j].class = reg_class_subunion[(int) op_alt[j].class][(int) GENERAL_REGS];
+ case 'g':
+ case 'r':
+ op_alt[j].cl =
+ reg_class_subunion[(int) op_alt[j].cl][(int) GENERAL_REGS];
break;
default:
if (EXTRA_ADDRESS_CONSTRAINT (c, p))
{
op_alt[j].is_address = 1;
- op_alt[j].class
+ op_alt[j].cl
= (reg_class_subunion
- [(int) op_alt[j].class]
- [(int) MODE_BASE_REG_CLASS (VOIDmode)]);
+ [(int) op_alt[j].cl]
+ [(int) base_reg_class (VOIDmode, ADDRESS,
+ SCRATCH)]);
break;
}
- op_alt[j].class
+ op_alt[j].cl
= (reg_class_subunion
- [(int) op_alt[j].class]
+ [(int) op_alt[j].cl]
[(int) REG_CLASS_FROM_CONSTRAINT ((unsigned char) c, p)]);
break;
}
struct funny_match
{
- int this, other;
+ int this_op, other;
};
int
do
{
+ int seen_earlyclobber_at = -1;
int opno;
int lose = 0;
funny_match_index = 0;
+ if (!recog_data.alternative_enabled_p[which_alternative])
+ {
+ int i;
+
+ for (i = 0; i < recog_data.n_operands; i++)
+ constraints[i] = skip_alternative (constraints[i]);
+
+ which_alternative++;
+ continue;
+ }
+
for (opno = 0; opno < recog_data.n_operands; opno++)
{
rtx op = recog_data.operand[opno];
/* A unary operator may be accepted by the predicate, but it
is irrelevant for matching constraints. */
- if (GET_RTX_CLASS (GET_CODE (op)) == '1')
+ if (UNARY_P (op))
op = XEXP (op, 0);
if (GET_CODE (op) == SUBREG)
{
- if (GET_CODE (SUBREG_REG (op)) == REG
+ if (REG_P (SUBREG_REG (op))
&& REGNO (SUBREG_REG (op)) < FIRST_PSEUDO_REGISTER)
offset = subreg_regno_offset (REGNO (SUBREG_REG (op)),
GET_MODE (SUBREG_REG (op)),
case '&':
earlyclobber[opno] = 1;
+ if (seen_earlyclobber_at < 0)
+ seen_earlyclobber_at = opno;
break;
case '0': case '1': case '2': case '3': case '4':
/* A unary operator may be accepted by the predicate,
but it is irrelevant for matching constraints. */
- if (GET_RTX_CLASS (GET_CODE (op1)) == '1')
+ if (UNARY_P (op1))
op1 = XEXP (op1, 0);
- if (GET_RTX_CLASS (GET_CODE (op2)) == '1')
+ if (UNARY_P (op2))
op2 = XEXP (op2, 0);
val = operands_match_p (op1, op2);
output op is the one that will be printed. */
if (val == 2 && strict > 0)
{
- funny_match[funny_match_index].this = opno;
+ funny_match[funny_match_index].this_op = opno;
funny_match[funny_match_index++].other = match;
}
}
break;
/* No need to check general_operand again;
- it was done in insn-recog.c. */
+ it was done in insn-recog.c. Well, except that reload
+ doesn't check the validity of its replacements, but
+ that should only matter when there's a bug. */
case 'g':
/* Anything goes unless it is a REG and really has a hard reg
but the hard reg is not in the class GENERAL_REGS. */
- if (strict < 0
- || GENERAL_REGS == ALL_REGS
- || GET_CODE (op) != REG
- || (reload_in_progress
- && REGNO (op) >= FIRST_PSEUDO_REGISTER)
- || reg_fits_class_p (op, GENERAL_REGS, offset, mode))
+ if (REG_P (op))
+ {
+ if (strict < 0
+ || GENERAL_REGS == ALL_REGS
+ || (reload_in_progress
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER)
+ || reg_fits_class_p (op, GENERAL_REGS, offset, mode))
+ win = 1;
+ }
+ else if (strict < 0 || general_operand (op, mode))
win = 1;
break;
win = 1;
break;
- case 'm':
- if (GET_CODE (op) == MEM
- /* Before reload, accept what reload can turn into mem. */
- || (strict < 0 && CONSTANT_P (op))
- /* During reload, accept a pseudo */
- || (reload_in_progress && GET_CODE (op) == REG
- && REGNO (op) >= FIRST_PSEUDO_REGISTER))
+ case TARGET_MEM_CONSTRAINT:
+ /* Memory operands must be valid, to the extent
+ required by STRICT. */
+ if (MEM_P (op))
+ {
+ if (strict > 0
+ && !strict_memory_address_addr_space_p
+ (GET_MODE (op), XEXP (op, 0),
+ MEM_ADDR_SPACE (op)))
+ break;
+ if (strict == 0
+ && !memory_address_addr_space_p
+ (GET_MODE (op), XEXP (op, 0),
+ MEM_ADDR_SPACE (op)))
+ break;
+ win = 1;
+ }
+ /* Before reload, accept what reload can turn into mem. */
+ else if (strict < 0 && CONSTANT_P (op))
+ win = 1;
+ /* During reload, accept a pseudo */
+ else if (reload_in_progress && REG_P (op)
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER)
win = 1;
break;
case '<':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (GET_CODE (XEXP (op, 0)) == PRE_DEC
|| GET_CODE (XEXP (op, 0)) == POST_DEC))
win = 1;
break;
case '>':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (GET_CODE (XEXP (op, 0)) == PRE_INC
|| GET_CODE (XEXP (op, 0)) == POST_INC))
win = 1;
break;
case 's':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
break;
break;
case 'n':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
win = 1;
case 'N':
case 'O':
case 'P':
- if (GET_CODE (op) == CONST_INT
+ if (CONST_INT_P (op)
&& CONST_OK_FOR_CONSTRAINT_P (INTVAL (op), c, p))
win = 1;
break;
case 'V':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& ((strict > 0 && ! offsettable_memref_p (op))
|| (strict < 0
- && !(CONSTANT_P (op) || GET_CODE (op) == MEM))
+ && !(CONSTANT_P (op) || MEM_P (op)))
|| (reload_in_progress
- && !(GET_CODE (op) == REG
+ && !(REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER))))
win = 1;
break;
|| (strict == 0 && offsettable_nonstrict_memref_p (op))
/* Before reload, accept what reload can handle. */
|| (strict < 0
- && (CONSTANT_P (op) || GET_CODE (op) == MEM))
+ && (CONSTANT_P (op) || MEM_P (op)))
/* During reload, accept a pseudo */
- || (reload_in_progress && GET_CODE (op) == REG
+ || (reload_in_progress && REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER))
win = 1;
break;
default:
{
- enum reg_class class;
+ enum reg_class cl;
- class = (c == 'r'
+ cl = (c == 'r'
? GENERAL_REGS : REG_CLASS_FROM_CONSTRAINT (c, p));
- if (class != NO_REGS)
+ if (cl != NO_REGS)
{
if (strict < 0
|| (strict == 0
- && GET_CODE (op) == REG
+ && REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER)
|| (strict == 0 && GET_CODE (op) == SCRATCH)
- || (GET_CODE (op) == REG
- && reg_fits_class_p (op, class, offset, mode)))
+ || (REG_P (op)
+ && reg_fits_class_p (op, cl, offset, mode)))
win = 1;
}
#ifdef EXTRA_CONSTRAINT_STR
else if (EXTRA_MEMORY_CONSTRAINT (c, p)
/* Every memory operand can be reloaded to fit. */
- && ((strict < 0 && GET_CODE (op) == MEM)
+ && ((strict < 0 && MEM_P (op))
/* Before reload, accept what reload can turn
into mem. */
|| (strict < 0 && CONSTANT_P (op))
/* During reload, accept a pseudo */
- || (reload_in_progress && GET_CODE (op) == REG
+ || (reload_in_progress && REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER)))
win = 1;
else if (EXTRA_ADDRESS_CONSTRAINT (c, p)
/* See if any earlyclobber operand conflicts with some other
operand. */
- if (strict > 0)
- for (eopno = 0; eopno < recog_data.n_operands; eopno++)
+ if (strict > 0 && seen_earlyclobber_at >= 0)
+ for (eopno = seen_earlyclobber_at;
+ eopno < recog_data.n_operands;
+ eopno++)
/* Ignore earlyclobber operands now in memory,
because we would often report failure when we have
two memory operands, one of which was formerly a REG. */
if (earlyclobber[eopno]
- && GET_CODE (recog_data.operand[eopno]) == REG)
+ && REG_P (recog_data.operand[eopno]))
for (opno = 0; opno < recog_data.n_operands; opno++)
- if ((GET_CODE (recog_data.operand[opno]) == MEM
+ if ((MEM_P (recog_data.operand[opno])
|| recog_data.operand_type[opno] != OP_OUT)
&& opno != eopno
/* Ignore things like match_operator operands. */
while (--funny_match_index >= 0)
{
recog_data.operand[funny_match[funny_match_index].other]
- = recog_data.operand[funny_match[funny_match_index].this];
+ = recog_data.operand[funny_match[funny_match_index].this_op];
}
return 1;
If REG occupies multiple hard regs, all of them must be in CLASS. */
int
-reg_fits_class_p (rtx operand, enum reg_class class, int offset,
+reg_fits_class_p (rtx operand, enum reg_class cl, int offset,
enum machine_mode mode)
{
int regno = REGNO (operand);
- if (regno < FIRST_PSEUDO_REGISTER
- && TEST_HARD_REG_BIT (reg_class_contents[(int) class],
- regno + offset))
- {
- int sr;
- regno += offset;
- for (sr = HARD_REGNO_NREGS (regno, mode) - 1;
- sr > 0; sr--)
- if (! TEST_HARD_REG_BIT (reg_class_contents[(int) class],
- regno + sr))
- break;
- return sr == 0;
- }
- return 0;
+ if (cl == NO_REGS)
+ return 0;
+
+ return (regno < FIRST_PSEUDO_REGISTER
+ && in_hard_reg_set_p (reg_class_contents[(int) cl],
+ mode, regno + offset));
}
\f
/* Split single instruction. Helper function for split_all_insns and
/* Split insns here to get max fine-grain parallelism. */
rtx first = PREV_INSN (insn);
rtx last = try_split (PATTERN (insn), insn, 1);
+ rtx insn_set, last_set, note;
if (last == insn)
return NULL_RTX;
+ /* If the original instruction was a single set that was known to be
+ equivalent to a constant, see if we can say the same about the last
+ instruction in the split sequence. The two instructions must set
+ the same destination. */
+ insn_set = single_set (insn);
+ if (insn_set)
+ {
+ last_set = single_set (last);
+ if (last_set && rtx_equal_p (SET_DEST (last_set), SET_DEST (insn_set)))
+ {
+ note = find_reg_equal_equiv_note (insn);
+ if (note && CONSTANT_P (XEXP (note, 0)))
+ set_unique_reg_note (last, REG_EQUAL, XEXP (note, 0));
+ else if (CONSTANT_P (SET_SRC (insn_set)))
+ set_unique_reg_note (last, REG_EQUAL, SET_SRC (insn_set));
+ }
+ }
+
/* try_split returns the NOTE that INSN became. */
- PUT_CODE (insn, NOTE);
- NOTE_SOURCE_FILE (insn) = 0;
- NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ SET_INSN_DELETED (insn);
/* ??? Coddle to md files that generate subregs in post-reload
splitters instead of computing the proper hard register. */
first = NEXT_INSN (first);
}
}
+
return last;
}
/* Split all insns in the function. If UPD_LIFE, update life info after. */
void
-split_all_insns (int upd_life)
+split_all_insns (void)
{
sbitmap blocks;
bool changed;
rtx insn, next;
bool finish = false;
+ rtl_profile_for_bb (bb);
for (insn = BB_HEAD (bb); !finish ; insn = next)
{
/* Can't use `next_real_insn' because that might go across
/* Don't split no-op move insns. These should silently
disappear later in final. Splitting such insns would
- break the code that handles REG_NO_CONFLICT blocks. */
+ break the code that handles LIBCALL blocks. */
if (set && set_noop_p (set))
{
/* Nops get in the way while scheduling, so delete them
allocation, and there are unlikely to be very many
nops then anyways. */
if (reload_completed)
- {
- /* If the no-op set has a REG_UNUSED note, we need
- to update liveness information. */
- if (find_reg_note (insn, REG_UNUSED, NULL_RTX))
- {
- SET_BIT (blocks, bb->index);
- changed = true;
- }
- /* ??? Is life info affected by deleting edges? */
delete_insn_and_edges (insn);
- }
}
else
{
BB boundary we are interested in will be set to
previous one. */
- while (GET_CODE (last) == BARRIER)
+ while (BARRIER_P (last))
last = PREV_INSN (last);
SET_BIT (blocks, bb->index);
changed = true;
}
}
+ default_rtl_profile ();
if (changed)
- {
- int old_last_basic_block = last_basic_block;
-
- find_many_sub_basic_blocks (blocks);
-
- if (old_last_basic_block != last_basic_block && upd_life)
- blocks = sbitmap_resize (blocks, last_basic_block, 1);
- }
-
- if (changed && upd_life)
- update_life_info (blocks, UPDATE_LIFE_GLOBAL_RM_NOTES,
- PROP_DEATH_NOTES | PROP_REG_INFO);
+ find_many_sub_basic_blocks (blocks);
#ifdef ENABLE_CHECKING
verify_flow_info ();
/* Same as split_all_insns, but do not expect CFG to be available.
Used by machine dependent reorg passes. */
-void
+unsigned int
split_all_insns_noflow (void)
{
rtx next, insn;
{
/* Don't split no-op move insns. These should silently
disappear later in final. Splitting such insns would
- break the code that handles REG_NO_CONFLICT blocks. */
+ break the code that handles LIBCALL blocks. */
rtx set = single_set (insn);
if (set && set_noop_p (set))
{
split_insn (insn);
}
}
+ return 0;
}
\f
#ifdef HAVE_peephole2
static struct peep2_insn_data peep2_insn_data[MAX_INSNS_PER_PEEP2 + 1];
static int peep2_current;
+/* The number of instructions available to match a peep2. */
+int peep2_current_count;
/* A non-insn marker indicating the last insn of the block.
The live_before regset for this element is correct, indicating
- global_live_at_end for the block. */
+ DF_LIVE_OUT for the block. */
#define PEEP2_EOB pc_rtx
/* Return the Nth non-note insn after `current', or return NULL_RTX if it
rtx
peep2_next_insn (int n)
{
- if (n >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (n <= peep2_current_count);
n += peep2_current;
if (n >= MAX_INSNS_PER_PEEP2 + 1)
n -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[n].insn == PEEP2_EOB)
- return NULL_RTX;
return peep2_insn_data[n].insn;
}
int
peep2_regno_dead_p (int ofs, int regno)
{
- if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (ofs < MAX_INSNS_PER_PEEP2 + 1);
ofs += peep2_current;
if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
ofs -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[ofs].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[ofs].insn != NULL_RTX);
return ! REGNO_REG_SET_P (peep2_insn_data[ofs].live_before, regno);
}
{
int regno, n;
- if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (ofs < MAX_INSNS_PER_PEEP2 + 1);
ofs += peep2_current;
if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
ofs -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[ofs].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[ofs].insn != NULL_RTX);
regno = REGNO (reg);
- n = HARD_REGNO_NREGS (regno, GET_MODE (reg));
+ n = hard_regno_nregs[regno][GET_MODE (reg)];
while (--n >= 0)
if (REGNO_REG_SET_P (peep2_insn_data[ofs].live_before, regno + n))
return 0;
enum machine_mode mode, HARD_REG_SET *reg_set)
{
static int search_ofs;
- enum reg_class class;
+ enum reg_class cl;
HARD_REG_SET live;
int i;
- if (from >= MAX_INSNS_PER_PEEP2 + 1 || to >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (from < MAX_INSNS_PER_PEEP2 + 1);
+ gcc_assert (to < MAX_INSNS_PER_PEEP2 + 1);
from += peep2_current;
if (from >= MAX_INSNS_PER_PEEP2 + 1)
if (to >= MAX_INSNS_PER_PEEP2 + 1)
to -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[from].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[from].insn != NULL_RTX);
REG_SET_TO_HARD_REG_SET (live, peep2_insn_data[from].live_before);
while (from != to)
if (++from >= MAX_INSNS_PER_PEEP2 + 1)
from = 0;
- if (peep2_insn_data[from].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[from].insn != NULL_RTX);
REG_SET_TO_HARD_REG_SET (this_live, peep2_insn_data[from].live_before);
IOR_HARD_REG_SET (live, this_live);
}
- class = (class_str[0] == 'r' ? GENERAL_REGS
+ cl = (class_str[0] == 'r' ? GENERAL_REGS
: REG_CLASS_FROM_CONSTRAINT (class_str[0], class_str));
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
/* Don't allocate fixed registers. */
if (fixed_regs[regno])
continue;
+ /* Don't allocate global registers. */
+ if (global_regs[regno])
+ continue;
/* Make sure the register is of the right class. */
- if (! TEST_HARD_REG_BIT (reg_class_contents[class], regno))
+ if (! TEST_HARD_REG_BIT (reg_class_contents[cl], regno))
continue;
/* And can support the mode we need. */
if (! HARD_REGNO_MODE_OK (regno, mode))
continue;
/* And that we don't create an extra save/restore. */
- if (! call_used_regs[regno] && ! regs_ever_live[regno])
+ if (! call_used_regs[regno] && ! df_regs_ever_live_p (regno))
continue;
+ if (! targetm.hard_regno_scratch_ok (regno))
+ continue;
+
/* And we don't clobber traceback for noreturn functions. */
if ((regno == FRAME_POINTER_REGNUM || regno == HARD_FRAME_POINTER_REGNUM)
&& (! reload_completed || frame_pointer_needed))
continue;
success = 1;
- for (j = HARD_REGNO_NREGS (regno, mode) - 1; j >= 0; j--)
+ for (j = hard_regno_nregs[regno][mode] - 1; j >= 0; j--)
{
if (TEST_HARD_REG_BIT (*reg_set, regno + j)
|| TEST_HARD_REG_BIT (live, regno + j))
}
if (success)
{
- for (j = HARD_REGNO_NREGS (regno, mode) - 1; j >= 0; j--)
- SET_HARD_REG_BIT (*reg_set, regno + j);
+ add_to_hard_reg_set (reg_set, mode, regno);
/* Start the next search with the next register. */
if (++raw_regno >= FIRST_PSEUDO_REGISTER)
return NULL_RTX;
}
+/* Forget all currently tracked instructions, only remember current
+ LIVE regset. */
+
+static void
+peep2_reinit_state (regset live)
+{
+ int i;
+
+ /* Indicate that all slots except the last holds invalid data. */
+ for (i = 0; i < MAX_INSNS_PER_PEEP2; ++i)
+ peep2_insn_data[i].insn = NULL_RTX;
+ peep2_current_count = 0;
+
+ /* Indicate that the last slot contains live_after data. */
+ peep2_insn_data[MAX_INSNS_PER_PEEP2].insn = PEEP2_EOB;
+ peep2_current = MAX_INSNS_PER_PEEP2;
+
+ COPY_REG_SET (peep2_insn_data[MAX_INSNS_PER_PEEP2].live_before, live);
+}
+
/* Perform the peephole2 optimization pass. */
-void
-peephole2_optimize (FILE *dump_file ATTRIBUTE_UNUSED)
+static void
+peephole2_optimize (void)
{
- regset_head rs_heads[MAX_INSNS_PER_PEEP2 + 2];
rtx insn, prev;
- regset live;
+ bitmap live;
int i;
basic_block bb;
-#ifdef HAVE_conditional_execution
- sbitmap blocks;
- bool changed;
-#endif
bool do_cleanup_cfg = false;
bool do_rebuild_jump_labels = false;
+ df_set_flags (DF_LR_RUN_DCE);
+ df_analyze ();
+
/* Initialize the regsets we're going to use. */
for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
- peep2_insn_data[i].live_before = INITIALIZE_REG_SET (rs_heads[i]);
- live = INITIALIZE_REG_SET (rs_heads[i]);
-
-#ifdef HAVE_conditional_execution
- blocks = sbitmap_alloc (last_basic_block);
- sbitmap_zero (blocks);
- changed = false;
-#else
- count_or_remove_death_notes (NULL, 1);
-#endif
+ peep2_insn_data[i].live_before = BITMAP_ALLOC (®_obstack);
+ live = BITMAP_ALLOC (®_obstack);
FOR_EACH_BB_REVERSE (bb)
{
- struct propagate_block_info *pbi;
-
- /* Indicate that all slots except the last holds invalid data. */
- for (i = 0; i < MAX_INSNS_PER_PEEP2; ++i)
- peep2_insn_data[i].insn = NULL_RTX;
-
- /* Indicate that the last slot contains live_after data. */
- peep2_insn_data[MAX_INSNS_PER_PEEP2].insn = PEEP2_EOB;
- peep2_current = MAX_INSNS_PER_PEEP2;
+ rtl_profile_for_bb (bb);
/* Start up propagation. */
- COPY_REG_SET (live, bb->global_live_at_end);
- COPY_REG_SET (peep2_insn_data[MAX_INSNS_PER_PEEP2].live_before, live);
-
-#ifdef HAVE_conditional_execution
- pbi = init_propagate_block_info (bb, live, NULL, NULL, 0);
-#else
- pbi = init_propagate_block_info (bb, live, NULL, NULL, PROP_DEATH_NOTES);
-#endif
+ bitmap_copy (live, DF_LR_OUT (bb));
+ df_simulate_initialize_backwards (bb, live);
+ peep2_reinit_state (live);
for (insn = BB_END (bb); ; insn = prev)
{
prev = PREV_INSN (insn);
- if (INSN_P (insn))
+ if (NONDEBUG_INSN_P (insn))
{
- rtx try, before_try, x;
+ rtx attempt, before_try, x;
int match_len;
rtx note;
bool was_call = false;
/* Record this insn. */
if (--peep2_current < 0)
peep2_current = MAX_INSNS_PER_PEEP2;
+ if (peep2_current_count < MAX_INSNS_PER_PEEP2
+ && peep2_insn_data[peep2_current].insn == NULL_RTX)
+ peep2_current_count++;
peep2_insn_data[peep2_current].insn = insn;
- propagate_one_insn (pbi, insn);
+ df_simulate_one_insn_backwards (bb, insn, live);
COPY_REG_SET (peep2_insn_data[peep2_current].live_before, live);
- /* Match the peephole. */
- try = peephole2_insns (PATTERN (insn), insn, &match_len);
- if (try != NULL)
+ if (RTX_FRAME_RELATED_P (insn))
+ {
+ /* If an insn has RTX_FRAME_RELATED_P set, peephole
+ substitution would lose the
+ REG_FRAME_RELATED_EXPR that is attached. */
+ peep2_reinit_state (live);
+ attempt = NULL;
+ }
+ else
+ /* Match the peephole. */
+ attempt = peephole2_insns (PATTERN (insn), insn, &match_len);
+
+ if (attempt != NULL)
{
/* If we are splitting a CALL_INSN, look for the CALL_INSN
in SEQ and copy our CALL_INSN_FUNCTION_USAGE and other
if (j >= MAX_INSNS_PER_PEEP2 + 1)
j -= MAX_INSNS_PER_PEEP2 + 1;
old_insn = peep2_insn_data[j].insn;
- if (GET_CODE (old_insn) != CALL_INSN)
+ if (!CALL_P (old_insn))
continue;
was_call = true;
- new_insn = try;
+ new_insn = attempt;
while (new_insn != NULL_RTX)
{
- if (GET_CODE (new_insn) == CALL_INSN)
+ if (CALL_P (new_insn))
break;
new_insn = NEXT_INSN (new_insn);
}
- if (new_insn == NULL_RTX)
- abort ();
+ gcc_assert (new_insn != NULL_RTX);
CALL_INSN_FUNCTION_USAGE (new_insn)
= CALL_INSN_FUNCTION_USAGE (old_insn);
{
case REG_NORETURN:
case REG_SETJMP:
- case REG_ALWAYS_RETURN:
- REG_NOTES (new_insn)
- = gen_rtx_EXPR_LIST (REG_NOTE_KIND (note),
- XEXP (note, 0),
- REG_NOTES (new_insn));
+ add_reg_note (new_insn, REG_NOTE_KIND (note),
+ XEXP (note, 0));
+ break;
default:
/* Discard all other reg notes. */
break;
if (j >= MAX_INSNS_PER_PEEP2 + 1)
j -= MAX_INSNS_PER_PEEP2 + 1;
old_insn = peep2_insn_data[j].insn;
- if (GET_CODE (old_insn) == CALL_INSN)
- abort ();
+ gcc_assert (!CALL_P (old_insn));
}
break;
}
REG_EH_REGION, NULL_RTX);
/* Replace the old sequence with the new. */
- try = emit_insn_after_setloc (try, peep2_insn_data[i].insn,
- INSN_LOCATOR (peep2_insn_data[i].insn));
+ attempt = emit_insn_after_setloc (attempt,
+ peep2_insn_data[i].insn,
+ INSN_LOCATOR (peep2_insn_data[i].insn));
before_try = PREV_INSN (insn);
- delete_insn_chain (insn, peep2_insn_data[i].insn);
+ delete_insn_chain (insn, peep2_insn_data[i].insn, false);
/* Re-insert the EH_REGION notes. */
if (note || (was_call && nonlocal_goto_handler_labels))
{
edge eh_edge;
+ edge_iterator ei;
- for (eh_edge = bb->succ; eh_edge
- ; eh_edge = eh_edge->succ_next)
+ FOR_EACH_EDGE (eh_edge, ei, bb->succs)
if (eh_edge->flags & (EDGE_EH | EDGE_ABNORMAL_CALL))
break;
- for (x = try ; x != before_try ; x = PREV_INSN (x))
- if (GET_CODE (x) == CALL_INSN
- || (flag_non_call_exceptions
- && may_trap_p (PATTERN (x))
- && !find_reg_note (x, REG_EH_REGION, NULL)))
- {
- if (note)
- REG_NOTES (x)
- = gen_rtx_EXPR_LIST (REG_EH_REGION,
- XEXP (note, 0),
- REG_NOTES (x));
-
- if (x != BB_END (bb) && eh_edge)
- {
- edge nfte, nehe;
- int flags;
-
- nfte = split_block (bb, x);
- flags = (eh_edge->flags
- & (EDGE_EH | EDGE_ABNORMAL));
- if (GET_CODE (x) == CALL_INSN)
- flags |= EDGE_ABNORMAL_CALL;
- nehe = make_edge (nfte->src, eh_edge->dest,
- flags);
-
- nehe->probability = eh_edge->probability;
- nfte->probability
- = REG_BR_PROB_BASE - nehe->probability;
-
- do_cleanup_cfg |= purge_dead_edges (nfte->dest);
-#ifdef HAVE_conditional_execution
- SET_BIT (blocks, nfte->dest->index);
- changed = true;
-#endif
- bb = nfte->src;
- eh_edge = nehe;
- }
- }
+ if (note)
+ copy_reg_eh_region_note_backward (note, attempt,
+ before_try);
+
+ if (eh_edge)
+ for (x = attempt ; x != before_try ; x = PREV_INSN (x))
+ if (x != BB_END (bb)
+ && (can_throw_internal (x)
+ || can_nonlocal_goto (x)))
+ {
+ edge nfte, nehe;
+ int flags;
+
+ nfte = split_block (bb, x);
+ flags = (eh_edge->flags
+ & (EDGE_EH | EDGE_ABNORMAL));
+ if (CALL_P (x))
+ flags |= EDGE_ABNORMAL_CALL;
+ nehe = make_edge (nfte->src, eh_edge->dest,
+ flags);
+
+ nehe->probability = eh_edge->probability;
+ nfte->probability
+ = REG_BR_PROB_BASE - nehe->probability;
+
+ do_cleanup_cfg |= purge_dead_edges (nfte->dest);
+ bb = nfte->src;
+ eh_edge = nehe;
+ }
/* Converting possibly trapping insn to non-trapping is
possible. Zap dummy outgoing edges. */
do_cleanup_cfg |= purge_dead_edges (bb);
}
-#ifdef HAVE_conditional_execution
- /* With conditional execution, we cannot back up the
- live information so easily, since the conditional
- death data structures are not so self-contained.
- So record that we've made a modification to this
- block and update life information at the end. */
- SET_BIT (blocks, bb->index);
- changed = true;
-
- for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
- peep2_insn_data[i].insn = NULL_RTX;
- peep2_insn_data[peep2_current].insn = PEEP2_EOB;
-#else
- /* Back up lifetime information past the end of the
- newly created sequence. */
- if (++i >= MAX_INSNS_PER_PEEP2 + 1)
- i = 0;
- COPY_REG_SET (live, peep2_insn_data[i].live_before);
-
- /* Update life information for the new sequence. */
- x = try;
- do
+ if (targetm.have_conditional_execution ())
+ {
+ for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
+ peep2_insn_data[i].insn = NULL_RTX;
+ peep2_insn_data[peep2_current].insn = PEEP2_EOB;
+ peep2_current_count = 0;
+ }
+ else
{
- if (INSN_P (x))
+ /* Back up lifetime information past the end of the
+ newly created sequence. */
+ if (++i >= MAX_INSNS_PER_PEEP2 + 1)
+ i = 0;
+ bitmap_copy (live, peep2_insn_data[i].live_before);
+
+ /* Update life information for the new sequence. */
+ x = attempt;
+ do
{
- if (--i < 0)
- i = MAX_INSNS_PER_PEEP2;
- peep2_insn_data[i].insn = x;
- propagate_one_insn (pbi, x);
- COPY_REG_SET (peep2_insn_data[i].live_before, live);
+ if (INSN_P (x))
+ {
+ if (--i < 0)
+ i = MAX_INSNS_PER_PEEP2;
+ if (peep2_current_count < MAX_INSNS_PER_PEEP2
+ && peep2_insn_data[i].insn == NULL_RTX)
+ peep2_current_count++;
+ peep2_insn_data[i].insn = x;
+ df_insn_rescan (x);
+ df_simulate_one_insn_backwards (bb, x, live);
+ bitmap_copy (peep2_insn_data[i].live_before,
+ live);
+ }
+ x = PREV_INSN (x);
}
- x = PREV_INSN (x);
- }
- while (x != prev);
+ while (x != prev);
- /* ??? Should verify that LIVE now matches what we
- had before the new sequence. */
-
- peep2_current = i;
-#endif
+ peep2_current = i;
+ }
/* If we generated a jump instruction, it won't have
JUMP_LABEL set. Recompute after we're done. */
- for (x = try; x != before_try; x = PREV_INSN (x))
- if (GET_CODE (x) == JUMP_INSN)
+ for (x = attempt; x != before_try; x = PREV_INSN (x))
+ if (JUMP_P (x))
{
do_rebuild_jump_labels = true;
break;
if (insn == BB_HEAD (bb))
break;
}
-
- free_propagate_block_info (pbi);
}
+ default_rtl_profile ();
for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
- FREE_REG_SET (peep2_insn_data[i].live_before);
- FREE_REG_SET (live);
-
+ BITMAP_FREE (peep2_insn_data[i].live_before);
+ BITMAP_FREE (live);
if (do_rebuild_jump_labels)
rebuild_jump_labels (get_insns ());
-
- /* If we eliminated EH edges, we may be able to merge blocks. Further,
- we've changed global life since exception handlers are no longer
- reachable. */
- if (do_cleanup_cfg)
- {
- cleanup_cfg (0);
- update_life_info (0, UPDATE_LIFE_GLOBAL_RM_NOTES, PROP_DEATH_NOTES);
- }
-#ifdef HAVE_conditional_execution
- else
- {
- count_or_remove_death_notes (blocks, 1);
- update_life_info (blocks, UPDATE_LIFE_LOCAL, PROP_DEATH_NOTES);
- }
- sbitmap_free (blocks);
-#endif
}
#endif /* HAVE_peephole2 */
/* Common predicates for use with define_bypass. */
/* True if the dependency between OUT_INSN and IN_INSN is on the store
- data not the address operand(s) of the store. IN_INSN must be
- single_set. OUT_INSN must be either a single_set or a PARALLEL with
- SETs inside. */
+ data not the address operand(s) of the store. IN_INSN and OUT_INSN
+ must be either a single_set or a PARALLEL with SETs inside. */
int
store_data_bypass_p (rtx out_insn, rtx in_insn)
{
rtx out_set, in_set;
+ rtx out_pat, in_pat;
+ rtx out_exp, in_exp;
+ int i, j;
in_set = single_set (in_insn);
- if (! in_set)
- abort ();
-
- if (GET_CODE (SET_DEST (in_set)) != MEM)
- return false;
-
- out_set = single_set (out_insn);
- if (out_set)
+ if (in_set)
{
- if (reg_mentioned_p (SET_DEST (out_set), SET_DEST (in_set)))
+ if (!MEM_P (SET_DEST (in_set)))
return false;
+
+ out_set = single_set (out_insn);
+ if (out_set)
+ {
+ if (reg_mentioned_p (SET_DEST (out_set), SET_DEST (in_set)))
+ return false;
+ }
+ else
+ {
+ out_pat = PATTERN (out_insn);
+
+ if (GET_CODE (out_pat) != PARALLEL)
+ return false;
+
+ for (i = 0; i < XVECLEN (out_pat, 0); i++)
+ {
+ out_exp = XVECEXP (out_pat, 0, i);
+
+ if (GET_CODE (out_exp) == CLOBBER)
+ continue;
+
+ gcc_assert (GET_CODE (out_exp) == SET);
+
+ if (reg_mentioned_p (SET_DEST (out_exp), SET_DEST (in_set)))
+ return false;
+ }
+ }
}
else
{
- rtx out_pat;
- int i;
-
- out_pat = PATTERN (out_insn);
- if (GET_CODE (out_pat) != PARALLEL)
- abort ();
+ in_pat = PATTERN (in_insn);
+ gcc_assert (GET_CODE (in_pat) == PARALLEL);
- for (i = 0; i < XVECLEN (out_pat, 0); i++)
+ for (i = 0; i < XVECLEN (in_pat, 0); i++)
{
- rtx exp = XVECEXP (out_pat, 0, i);
+ in_exp = XVECEXP (in_pat, 0, i);
- if (GET_CODE (exp) == CLOBBER)
+ if (GET_CODE (in_exp) == CLOBBER)
continue;
- if (GET_CODE (exp) != SET)
- abort ();
+ gcc_assert (GET_CODE (in_exp) == SET);
- if (reg_mentioned_p (SET_DEST (exp), SET_DEST (in_set)))
+ if (!MEM_P (SET_DEST (in_exp)))
return false;
- }
+
+ out_set = single_set (out_insn);
+ if (out_set)
+ {
+ if (reg_mentioned_p (SET_DEST (out_set), SET_DEST (in_exp)))
+ return false;
+ }
+ else
+ {
+ out_pat = PATTERN (out_insn);
+ gcc_assert (GET_CODE (out_pat) == PARALLEL);
+
+ for (j = 0; j < XVECLEN (out_pat, 0); j++)
+ {
+ out_exp = XVECEXP (out_pat, 0, j);
+
+ if (GET_CODE (out_exp) == CLOBBER)
+ continue;
+
+ gcc_assert (GET_CODE (out_exp) == SET);
+
+ if (reg_mentioned_p (SET_DEST (out_exp), SET_DEST (in_exp)))
+ return false;
+ }
+ }
+ }
}
return true;
in_set = single_set (in_insn);
if (! in_set)
{
- if (GET_CODE (in_insn) == JUMP_INSN || GET_CODE (in_insn) == CALL_INSN)
- return false;
- abort ();
+ gcc_assert (JUMP_P (in_insn) || CALL_P (in_insn));
+ return false;
}
if (GET_CODE (SET_SRC (in_set)) != IF_THEN_ELSE)
int i;
out_pat = PATTERN (out_insn);
- if (GET_CODE (out_pat) != PARALLEL)
- abort ();
+ gcc_assert (GET_CODE (out_pat) == PARALLEL);
for (i = 0; i < XVECLEN (out_pat, 0); i++)
{
if (GET_CODE (exp) == CLOBBER)
continue;
- if (GET_CODE (exp) != SET)
- abort ();
+ gcc_assert (GET_CODE (exp) == SET);
if (reg_mentioned_p (SET_DEST (out_set), XEXP (in_set, 1))
|| reg_mentioned_p (SET_DEST (out_set), XEXP (in_set, 2)))
return true;
}
+\f
+static bool
+gate_handle_peephole2 (void)
+{
+ return (optimize > 0 && flag_peephole2);
+}
+
+static unsigned int
+rest_of_handle_peephole2 (void)
+{
+#ifdef HAVE_peephole2
+ peephole2_optimize ();
+#endif
+ return 0;
+}
+
+struct rtl_opt_pass pass_peephole2 =
+{
+ {
+ RTL_PASS,
+ "peephole2", /* name */
+ gate_handle_peephole2, /* gate */
+ rest_of_handle_peephole2, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_PEEPHOLE2, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_df_finish | TODO_verify_rtl_sharing |
+ TODO_dump_func /* todo_flags_finish */
+ }
+};
+
+static unsigned int
+rest_of_handle_split_all_insns (void)
+{
+ split_all_insns ();
+ return 0;
+}
+
+struct rtl_opt_pass pass_split_all_insns =
+{
+ {
+ RTL_PASS,
+ "split1", /* name */
+ NULL, /* gate */
+ rest_of_handle_split_all_insns, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func /* todo_flags_finish */
+ }
+};
+
+static unsigned int
+rest_of_handle_split_after_reload (void)
+{
+ /* If optimizing, then go ahead and split insns now. */
+#ifndef STACK_REGS
+ if (optimize > 0)
+#endif
+ split_all_insns ();
+ return 0;
+}
+
+struct rtl_opt_pass pass_split_after_reload =
+{
+ {
+ RTL_PASS,
+ "split2", /* name */
+ NULL, /* gate */
+ rest_of_handle_split_after_reload, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func /* todo_flags_finish */
+ }
+};
+
+static bool
+gate_handle_split_before_regstack (void)
+{
+#if defined (HAVE_ATTR_length) && defined (STACK_REGS)
+ /* If flow2 creates new instructions which need splitting
+ and scheduling after reload is not done, they might not be
+ split until final which doesn't allow splitting
+ if HAVE_ATTR_length. */
+# ifdef INSN_SCHEDULING
+ return (optimize && !flag_schedule_insns_after_reload);
+# else
+ return (optimize);
+# endif
+#else
+ return 0;
+#endif
+}
+
+static unsigned int
+rest_of_handle_split_before_regstack (void)
+{
+ split_all_insns ();
+ return 0;
+}
+
+struct rtl_opt_pass pass_split_before_regstack =
+{
+ {
+ RTL_PASS,
+ "split3", /* name */
+ gate_handle_split_before_regstack, /* gate */
+ rest_of_handle_split_before_regstack, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func /* todo_flags_finish */
+ }
+};
+
+static bool
+gate_handle_split_before_sched2 (void)
+{
+#ifdef INSN_SCHEDULING
+ return optimize > 0 && flag_schedule_insns_after_reload;
+#else
+ return 0;
+#endif
+}
+
+static unsigned int
+rest_of_handle_split_before_sched2 (void)
+{
+#ifdef INSN_SCHEDULING
+ split_all_insns ();
+#endif
+ return 0;
+}
+
+struct rtl_opt_pass pass_split_before_sched2 =
+{
+ {
+ RTL_PASS,
+ "split4", /* name */
+ gate_handle_split_before_sched2, /* gate */
+ rest_of_handle_split_before_sched2, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_verify_flow |
+ TODO_dump_func /* todo_flags_finish */
+ }
+};
+
+/* The placement of the splitting that we do for shorten_branches
+ depends on whether regstack is used by the target or not. */
+static bool
+gate_do_final_split (void)
+{
+#if defined (HAVE_ATTR_length) && !defined (STACK_REGS)
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+struct rtl_opt_pass pass_split_for_shorten_branches =
+{
+ {
+ RTL_PASS,
+ "split5", /* name */
+ gate_do_final_split, /* gate */
+ split_all_insns_noflow, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_NONE, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func | TODO_verify_rtl_sharing /* todo_flags_finish */
+ }
+};