/* Definitions for code generation pass of GNU compiler.
- Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
This file is part of GCC.
For example, add_optab applies to addition.
- The insn_code slot is the enum insn_code that says how to
- generate an insn for this operation on a particular machine mode.
- It is CODE_FOR_nothing if there is no such insn on the target machine.
-
The `lib_call' slot is the name of the library function that
can be used to perform the operation.
- A few optabs, such as move_optab and cmp_optab, are used
- by special code. */
+ A few optabs, such as move_optab, are used by special code. */
-struct optab_handlers GTY(())
+struct optab_handlers
{
- enum insn_code insn_code;
- rtx libfunc;
+ /* I - CODE_FOR_nothing, where I is either the insn code of the
+ associated insn generator or CODE_FOR_nothing if there is no such
+ insn on the target machine. */
+ int insn_code;
};
-struct optab GTY(())
+struct optab_d
{
enum rtx_code code;
+ char libcall_suffix;
+ const char *libcall_basename;
+ void (*libcall_gen)(struct optab_d *, const char *name, char suffix,
+ enum machine_mode);
struct optab_handlers handlers[NUM_MACHINE_MODES];
};
-typedef struct optab * optab;
+typedef struct optab_d * optab;
/* A convert_optab is for some sort of conversion operation between
modes. The first array index is the destination mode, the second
is the source mode. */
-struct convert_optab GTY(())
+struct convert_optab_d
{
enum rtx_code code;
+ const char *libcall_basename;
+ void (*libcall_gen)(struct convert_optab_d *, const char *name,
+ enum machine_mode,
+ enum machine_mode);
struct optab_handlers handlers[NUM_MACHINE_MODES][NUM_MACHINE_MODES];
};
-typedef struct convert_optab *convert_optab;
+typedef struct convert_optab_d *convert_optab;
/* Given an enum insn_code, access the function to construct
the body of that kind of insn. */
/* Enumeration of valid indexes into optab_table. */
enum optab_index
{
+ /* Fixed-point operators with signed/unsigned saturation */
+ OTI_ssadd,
+ OTI_usadd,
+ OTI_sssub,
+ OTI_ussub,
+ OTI_ssmul,
+ OTI_usmul,
+ OTI_ssdiv,
+ OTI_usdiv,
+ OTI_ssneg,
+ OTI_usneg,
+ OTI_ssashl,
+ OTI_usashl,
+
OTI_add,
OTI_addv,
OTI_sub,
/* Unsigned multiply and add with the result and addend one machine mode
wider than the multiplicand and multiplier. */
OTI_umadd_widen,
+ /* Signed multiply and add with the result and addend one machine mode
+ wider than the multiplicand and multiplier.
+ All involved operations are saturating. */
+ OTI_ssmadd_widen,
+ /* Unsigned multiply and add with the result and addend one machine mode
+ wider than the multiplicand and multiplier.
+ All involved operations are saturating. */
+ OTI_usmadd_widen,
/* Signed multiply and subtract the result and minuend one machine mode
wider than the multiplicand and multiplier. */
OTI_smsub_widen,
/* Unsigned multiply and subtract the result and minuend one machine mode
wider than the multiplicand and multiplier. */
OTI_umsub_widen,
+ /* Signed multiply and subtract the result and minuend one machine mode
+ wider than the multiplicand and multiplier.
+ All involved operations are saturating. */
+ OTI_ssmsub_widen,
+ /* Unsigned multiply and subtract the result and minuend one machine mode
+ wider than the multiplicand and multiplier.
+ All involved operations are saturating. */
+ OTI_usmsub_widen,
/* Signed divide */
OTI_sdiv,
OTI_rotl,
/* Rotate right */
OTI_rotr,
+
+ /* Arithmetic shift left of vector by vector */
+ OTI_vashl,
+ /* Logical shift right of vector by vector */
+ OTI_vlshr,
+ /* Arithmetic shift right of vector by vector */
+ OTI_vashr,
+ /* Rotate left of vector by vector */
+ OTI_vrotl,
+ /* Rotate right of vector by vector */
+ OTI_vrotr,
+
/* Signed and floating-point minimum value */
OTI_smin,
/* Signed and floating-point maximum value */
OTI_pow,
/* Arc tangent of y/x */
OTI_atan2,
+ /* Floating multiply/add */
+ OTI_fma,
+ OTI_fms,
+ OTI_fnma,
+ OTI_fnms,
/* Move instruction. */
OTI_mov,
OTI_ldexp,
/* Multiply floating-point number by integral power of radix */
OTI_scalb,
+ /* Mantissa of a floating-point number */
+ OTI_significand,
/* Radix-independent exponent */
OTI_logb,
OTI_ilogb,
/* Test for infinite value */
OTI_isinf,
- /* Compare insn; two operands. */
+ /* Compare insn; two operands. Used only for libcalls. */
OTI_cmp,
- /* Used only for libcalls for unsigned comparisons. */
OTI_ucmp,
- /* tst insn; compare one operand against 0 */
- OTI_tst,
/* Floating point comparison optabs - used primarily for libfuncs */
OTI_eq,
/* String length */
OTI_strlen,
- /* Combined compare & jump/store flags/move operations. */
+ /* Combined compare & jump/move/store flags/trap operations. */
OTI_cbranch,
OTI_cmov,
OTI_cstore,
+ OTI_ctrap,
/* Push instruction. */
OTI_push,
OTI_vec_shr,
/* Extract specified elements from vectors, for vector load. */
OTI_vec_realign_load,
- /* Widening multiplication.
+ /* Widening multiplication.
The high/low part of the resulting vector of products is returned. */
OTI_vec_widen_umult_hi,
OTI_vec_widen_umult_lo,
OTI_MAX
};
-extern GTY(()) optab optab_table[OTI_MAX];
-
-#define add_optab (optab_table[OTI_add])
-#define sub_optab (optab_table[OTI_sub])
-#define smul_optab (optab_table[OTI_smul])
-#define addv_optab (optab_table[OTI_addv])
-#define subv_optab (optab_table[OTI_subv])
-#define smul_highpart_optab (optab_table[OTI_smul_highpart])
-#define umul_highpart_optab (optab_table[OTI_umul_highpart])
-#define smul_widen_optab (optab_table[OTI_smul_widen])
-#define umul_widen_optab (optab_table[OTI_umul_widen])
-#define usmul_widen_optab (optab_table[OTI_usmul_widen])
-#define smadd_widen_optab (optab_table[OTI_smadd_widen])
-#define umadd_widen_optab (optab_table[OTI_umadd_widen])
-#define smsub_widen_optab (optab_table[OTI_smsub_widen])
-#define umsub_widen_optab (optab_table[OTI_umsub_widen])
-#define sdiv_optab (optab_table[OTI_sdiv])
-#define smulv_optab (optab_table[OTI_smulv])
-#define sdivv_optab (optab_table[OTI_sdivv])
-#define sdivmod_optab (optab_table[OTI_sdivmod])
-#define udiv_optab (optab_table[OTI_udiv])
-#define udivmod_optab (optab_table[OTI_udivmod])
-#define smod_optab (optab_table[OTI_smod])
-#define umod_optab (optab_table[OTI_umod])
-#define fmod_optab (optab_table[OTI_fmod])
-#define remainder_optab (optab_table[OTI_remainder])
-#define ftrunc_optab (optab_table[OTI_ftrunc])
-#define and_optab (optab_table[OTI_and])
-#define ior_optab (optab_table[OTI_ior])
-#define xor_optab (optab_table[OTI_xor])
-#define ashl_optab (optab_table[OTI_ashl])
-#define lshr_optab (optab_table[OTI_lshr])
-#define ashr_optab (optab_table[OTI_ashr])
-#define rotl_optab (optab_table[OTI_rotl])
-#define rotr_optab (optab_table[OTI_rotr])
-#define smin_optab (optab_table[OTI_smin])
-#define smax_optab (optab_table[OTI_smax])
-#define umin_optab (optab_table[OTI_umin])
-#define umax_optab (optab_table[OTI_umax])
-#define pow_optab (optab_table[OTI_pow])
-#define atan2_optab (optab_table[OTI_atan2])
-
-#define mov_optab (optab_table[OTI_mov])
-#define movstrict_optab (optab_table[OTI_movstrict])
-#define movmisalign_optab (optab_table[OTI_movmisalign])
-#define storent_optab (optab_table[OTI_storent])
-
-#define neg_optab (optab_table[OTI_neg])
-#define negv_optab (optab_table[OTI_negv])
-#define abs_optab (optab_table[OTI_abs])
-#define absv_optab (optab_table[OTI_absv])
-#define one_cmpl_optab (optab_table[OTI_one_cmpl])
-#define bswap_optab (optab_table[OTI_bswap])
-#define ffs_optab (optab_table[OTI_ffs])
-#define clz_optab (optab_table[OTI_clz])
-#define ctz_optab (optab_table[OTI_ctz])
-#define popcount_optab (optab_table[OTI_popcount])
-#define parity_optab (optab_table[OTI_parity])
-#define sqrt_optab (optab_table[OTI_sqrt])
-#define sincos_optab (optab_table[OTI_sincos])
-#define sin_optab (optab_table[OTI_sin])
-#define asin_optab (optab_table[OTI_asin])
-#define cos_optab (optab_table[OTI_cos])
-#define acos_optab (optab_table[OTI_acos])
-#define exp_optab (optab_table[OTI_exp])
-#define exp10_optab (optab_table[OTI_exp10])
-#define exp2_optab (optab_table[OTI_exp2])
-#define expm1_optab (optab_table[OTI_expm1])
-#define ldexp_optab (optab_table[OTI_ldexp])
-#define scalb_optab (optab_table[OTI_scalb])
-#define logb_optab (optab_table[OTI_logb])
-#define ilogb_optab (optab_table[OTI_ilogb])
-#define log_optab (optab_table[OTI_log])
-#define log10_optab (optab_table[OTI_log10])
-#define log2_optab (optab_table[OTI_log2])
-#define log1p_optab (optab_table[OTI_log1p])
-#define floor_optab (optab_table[OTI_floor])
-#define ceil_optab (optab_table[OTI_ceil])
-#define btrunc_optab (optab_table[OTI_btrunc])
-#define round_optab (optab_table[OTI_round])
-#define nearbyint_optab (optab_table[OTI_nearbyint])
-#define rint_optab (optab_table[OTI_rint])
-#define tan_optab (optab_table[OTI_tan])
-#define atan_optab (optab_table[OTI_atan])
-#define copysign_optab (optab_table[OTI_copysign])
-#define signbit_optab (optab_table[OTI_signbit])
-#define isinf_optab (optab_table[OTI_isinf])
-
-#define cmp_optab (optab_table[OTI_cmp])
-#define ucmp_optab (optab_table[OTI_ucmp])
-#define tst_optab (optab_table[OTI_tst])
-
-#define eq_optab (optab_table[OTI_eq])
-#define ne_optab (optab_table[OTI_ne])
-#define gt_optab (optab_table[OTI_gt])
-#define ge_optab (optab_table[OTI_ge])
-#define lt_optab (optab_table[OTI_lt])
-#define le_optab (optab_table[OTI_le])
-#define unord_optab (optab_table[OTI_unord])
-
-#define strlen_optab (optab_table[OTI_strlen])
-
-#define cbranch_optab (optab_table[OTI_cbranch])
-#define cmov_optab (optab_table[OTI_cmov])
-#define cstore_optab (optab_table[OTI_cstore])
-#define push_optab (optab_table[OTI_push])
-#define addcc_optab (optab_table[OTI_addcc])
-
-#define reduc_smax_optab (optab_table[OTI_reduc_smax])
-#define reduc_umax_optab (optab_table[OTI_reduc_umax])
-#define reduc_smin_optab (optab_table[OTI_reduc_smin])
-#define reduc_umin_optab (optab_table[OTI_reduc_umin])
-#define reduc_splus_optab (optab_table[OTI_reduc_splus])
-#define reduc_uplus_optab (optab_table[OTI_reduc_uplus])
-
-#define ssum_widen_optab (optab_table[OTI_ssum_widen])
-#define usum_widen_optab (optab_table[OTI_usum_widen])
-#define sdot_prod_optab (optab_table[OTI_sdot_prod])
-#define udot_prod_optab (optab_table[OTI_udot_prod])
-
-#define vec_set_optab (optab_table[OTI_vec_set])
-#define vec_extract_optab (optab_table[OTI_vec_extract])
-#define vec_extract_even_optab (optab_table[OTI_vec_extract_even])
-#define vec_extract_odd_optab (optab_table[OTI_vec_extract_odd])
-#define vec_interleave_high_optab (optab_table[OTI_vec_interleave_high])
-#define vec_interleave_low_optab (optab_table[OTI_vec_interleave_low])
-#define vec_init_optab (optab_table[OTI_vec_init])
-#define vec_shl_optab (optab_table[OTI_vec_shl])
-#define vec_shr_optab (optab_table[OTI_vec_shr])
-#define vec_realign_load_optab (optab_table[OTI_vec_realign_load])
-#define vec_widen_umult_hi_optab (optab_table[OTI_vec_widen_umult_hi])
-#define vec_widen_umult_lo_optab (optab_table[OTI_vec_widen_umult_lo])
-#define vec_widen_smult_hi_optab (optab_table[OTI_vec_widen_smult_hi])
-#define vec_widen_smult_lo_optab (optab_table[OTI_vec_widen_smult_lo])
-#define vec_unpacks_hi_optab (optab_table[OTI_vec_unpacks_hi])
-#define vec_unpacks_lo_optab (optab_table[OTI_vec_unpacks_lo])
-#define vec_unpacku_hi_optab (optab_table[OTI_vec_unpacku_hi])
-#define vec_unpacku_lo_optab (optab_table[OTI_vec_unpacku_lo])
-#define vec_unpacks_float_hi_optab (optab_table[OTI_vec_unpacks_float_hi])
-#define vec_unpacks_float_lo_optab (optab_table[OTI_vec_unpacks_float_lo])
-#define vec_unpacku_float_hi_optab (optab_table[OTI_vec_unpacku_float_hi])
-#define vec_unpacku_float_lo_optab (optab_table[OTI_vec_unpacku_float_lo])
-#define vec_pack_trunc_optab (optab_table[OTI_vec_pack_trunc])
-#define vec_pack_ssat_optab (optab_table[OTI_vec_pack_ssat])
-#define vec_pack_usat_optab (optab_table[OTI_vec_pack_usat])
-#define vec_pack_sfix_trunc_optab (optab_table[OTI_vec_pack_sfix_trunc])
-#define vec_pack_ufix_trunc_optab (optab_table[OTI_vec_pack_ufix_trunc])
-
-#define powi_optab (optab_table[OTI_powi])
+#define ssadd_optab (&optab_table[OTI_ssadd])
+#define usadd_optab (&optab_table[OTI_usadd])
+#define sssub_optab (&optab_table[OTI_sssub])
+#define ussub_optab (&optab_table[OTI_ussub])
+#define ssmul_optab (&optab_table[OTI_ssmul])
+#define usmul_optab (&optab_table[OTI_usmul])
+#define ssdiv_optab (&optab_table[OTI_ssdiv])
+#define usdiv_optab (&optab_table[OTI_usdiv])
+#define ssneg_optab (&optab_table[OTI_ssneg])
+#define usneg_optab (&optab_table[OTI_usneg])
+#define ssashl_optab (&optab_table[OTI_ssashl])
+#define usashl_optab (&optab_table[OTI_usashl])
+
+#define add_optab (&optab_table[OTI_add])
+#define sub_optab (&optab_table[OTI_sub])
+#define smul_optab (&optab_table[OTI_smul])
+#define addv_optab (&optab_table[OTI_addv])
+#define subv_optab (&optab_table[OTI_subv])
+#define smul_highpart_optab (&optab_table[OTI_smul_highpart])
+#define umul_highpart_optab (&optab_table[OTI_umul_highpart])
+#define smul_widen_optab (&optab_table[OTI_smul_widen])
+#define umul_widen_optab (&optab_table[OTI_umul_widen])
+#define usmul_widen_optab (&optab_table[OTI_usmul_widen])
+#define smadd_widen_optab (&optab_table[OTI_smadd_widen])
+#define umadd_widen_optab (&optab_table[OTI_umadd_widen])
+#define ssmadd_widen_optab (&optab_table[OTI_ssmadd_widen])
+#define usmadd_widen_optab (&optab_table[OTI_usmadd_widen])
+#define smsub_widen_optab (&optab_table[OTI_smsub_widen])
+#define umsub_widen_optab (&optab_table[OTI_umsub_widen])
+#define ssmsub_widen_optab (&optab_table[OTI_ssmsub_widen])
+#define usmsub_widen_optab (&optab_table[OTI_usmsub_widen])
+#define sdiv_optab (&optab_table[OTI_sdiv])
+#define smulv_optab (&optab_table[OTI_smulv])
+#define sdivv_optab (&optab_table[OTI_sdivv])
+#define sdivmod_optab (&optab_table[OTI_sdivmod])
+#define udiv_optab (&optab_table[OTI_udiv])
+#define udivmod_optab (&optab_table[OTI_udivmod])
+#define smod_optab (&optab_table[OTI_smod])
+#define umod_optab (&optab_table[OTI_umod])
+#define fmod_optab (&optab_table[OTI_fmod])
+#define remainder_optab (&optab_table[OTI_remainder])
+#define ftrunc_optab (&optab_table[OTI_ftrunc])
+#define and_optab (&optab_table[OTI_and])
+#define ior_optab (&optab_table[OTI_ior])
+#define xor_optab (&optab_table[OTI_xor])
+#define ashl_optab (&optab_table[OTI_ashl])
+#define lshr_optab (&optab_table[OTI_lshr])
+#define ashr_optab (&optab_table[OTI_ashr])
+#define rotl_optab (&optab_table[OTI_rotl])
+#define rotr_optab (&optab_table[OTI_rotr])
+#define vashl_optab (&optab_table[OTI_vashl])
+#define vlshr_optab (&optab_table[OTI_vlshr])
+#define vashr_optab (&optab_table[OTI_vashr])
+#define vrotl_optab (&optab_table[OTI_vrotl])
+#define vrotr_optab (&optab_table[OTI_vrotr])
+#define smin_optab (&optab_table[OTI_smin])
+#define smax_optab (&optab_table[OTI_smax])
+#define umin_optab (&optab_table[OTI_umin])
+#define umax_optab (&optab_table[OTI_umax])
+#define pow_optab (&optab_table[OTI_pow])
+#define atan2_optab (&optab_table[OTI_atan2])
+#define fma_optab (&optab_table[OTI_fma])
+#define fms_optab (&optab_table[OTI_fms])
+#define fnma_optab (&optab_table[OTI_fnma])
+#define fnms_optab (&optab_table[OTI_fnms])
+
+#define mov_optab (&optab_table[OTI_mov])
+#define movstrict_optab (&optab_table[OTI_movstrict])
+#define movmisalign_optab (&optab_table[OTI_movmisalign])
+#define storent_optab (&optab_table[OTI_storent])
+
+#define neg_optab (&optab_table[OTI_neg])
+#define negv_optab (&optab_table[OTI_negv])
+#define abs_optab (&optab_table[OTI_abs])
+#define absv_optab (&optab_table[OTI_absv])
+#define one_cmpl_optab (&optab_table[OTI_one_cmpl])
+#define bswap_optab (&optab_table[OTI_bswap])
+#define ffs_optab (&optab_table[OTI_ffs])
+#define clz_optab (&optab_table[OTI_clz])
+#define ctz_optab (&optab_table[OTI_ctz])
+#define popcount_optab (&optab_table[OTI_popcount])
+#define parity_optab (&optab_table[OTI_parity])
+#define sqrt_optab (&optab_table[OTI_sqrt])
+#define sincos_optab (&optab_table[OTI_sincos])
+#define sin_optab (&optab_table[OTI_sin])
+#define asin_optab (&optab_table[OTI_asin])
+#define cos_optab (&optab_table[OTI_cos])
+#define acos_optab (&optab_table[OTI_acos])
+#define exp_optab (&optab_table[OTI_exp])
+#define exp10_optab (&optab_table[OTI_exp10])
+#define exp2_optab (&optab_table[OTI_exp2])
+#define expm1_optab (&optab_table[OTI_expm1])
+#define ldexp_optab (&optab_table[OTI_ldexp])
+#define scalb_optab (&optab_table[OTI_scalb])
+#define significand_optab (&optab_table[OTI_significand])
+#define logb_optab (&optab_table[OTI_logb])
+#define ilogb_optab (&optab_table[OTI_ilogb])
+#define log_optab (&optab_table[OTI_log])
+#define log10_optab (&optab_table[OTI_log10])
+#define log2_optab (&optab_table[OTI_log2])
+#define log1p_optab (&optab_table[OTI_log1p])
+#define floor_optab (&optab_table[OTI_floor])
+#define ceil_optab (&optab_table[OTI_ceil])
+#define btrunc_optab (&optab_table[OTI_btrunc])
+#define round_optab (&optab_table[OTI_round])
+#define nearbyint_optab (&optab_table[OTI_nearbyint])
+#define rint_optab (&optab_table[OTI_rint])
+#define tan_optab (&optab_table[OTI_tan])
+#define atan_optab (&optab_table[OTI_atan])
+#define copysign_optab (&optab_table[OTI_copysign])
+#define signbit_optab (&optab_table[OTI_signbit])
+#define isinf_optab (&optab_table[OTI_isinf])
+
+#define cmp_optab (&optab_table[OTI_cmp])
+#define ucmp_optab (&optab_table[OTI_ucmp])
+
+#define eq_optab (&optab_table[OTI_eq])
+#define ne_optab (&optab_table[OTI_ne])
+#define gt_optab (&optab_table[OTI_gt])
+#define ge_optab (&optab_table[OTI_ge])
+#define lt_optab (&optab_table[OTI_lt])
+#define le_optab (&optab_table[OTI_le])
+#define unord_optab (&optab_table[OTI_unord])
+
+#define strlen_optab (&optab_table[OTI_strlen])
+
+#define cbranch_optab (&optab_table[OTI_cbranch])
+#define cmov_optab (&optab_table[OTI_cmov])
+#define cstore_optab (&optab_table[OTI_cstore])
+#define ctrap_optab (&optab_table[OTI_ctrap])
+
+#define push_optab (&optab_table[OTI_push])
+#define addcc_optab (&optab_table[OTI_addcc])
+
+#define reduc_smax_optab (&optab_table[OTI_reduc_smax])
+#define reduc_umax_optab (&optab_table[OTI_reduc_umax])
+#define reduc_smin_optab (&optab_table[OTI_reduc_smin])
+#define reduc_umin_optab (&optab_table[OTI_reduc_umin])
+#define reduc_splus_optab (&optab_table[OTI_reduc_splus])
+#define reduc_uplus_optab (&optab_table[OTI_reduc_uplus])
+
+#define ssum_widen_optab (&optab_table[OTI_ssum_widen])
+#define usum_widen_optab (&optab_table[OTI_usum_widen])
+#define sdot_prod_optab (&optab_table[OTI_sdot_prod])
+#define udot_prod_optab (&optab_table[OTI_udot_prod])
+
+#define vec_set_optab (&optab_table[OTI_vec_set])
+#define vec_extract_optab (&optab_table[OTI_vec_extract])
+#define vec_extract_even_optab (&optab_table[OTI_vec_extract_even])
+#define vec_extract_odd_optab (&optab_table[OTI_vec_extract_odd])
+#define vec_interleave_high_optab (&optab_table[OTI_vec_interleave_high])
+#define vec_interleave_low_optab (&optab_table[OTI_vec_interleave_low])
+#define vec_init_optab (&optab_table[OTI_vec_init])
+#define vec_shl_optab (&optab_table[OTI_vec_shl])
+#define vec_shr_optab (&optab_table[OTI_vec_shr])
+#define vec_realign_load_optab (&optab_table[OTI_vec_realign_load])
+#define vec_widen_umult_hi_optab (&optab_table[OTI_vec_widen_umult_hi])
+#define vec_widen_umult_lo_optab (&optab_table[OTI_vec_widen_umult_lo])
+#define vec_widen_smult_hi_optab (&optab_table[OTI_vec_widen_smult_hi])
+#define vec_widen_smult_lo_optab (&optab_table[OTI_vec_widen_smult_lo])
+#define vec_unpacks_hi_optab (&optab_table[OTI_vec_unpacks_hi])
+#define vec_unpacks_lo_optab (&optab_table[OTI_vec_unpacks_lo])
+#define vec_unpacku_hi_optab (&optab_table[OTI_vec_unpacku_hi])
+#define vec_unpacku_lo_optab (&optab_table[OTI_vec_unpacku_lo])
+#define vec_unpacks_float_hi_optab (&optab_table[OTI_vec_unpacks_float_hi])
+#define vec_unpacks_float_lo_optab (&optab_table[OTI_vec_unpacks_float_lo])
+#define vec_unpacku_float_hi_optab (&optab_table[OTI_vec_unpacku_float_hi])
+#define vec_unpacku_float_lo_optab (&optab_table[OTI_vec_unpacku_float_lo])
+#define vec_pack_trunc_optab (&optab_table[OTI_vec_pack_trunc])
+#define vec_pack_ssat_optab (&optab_table[OTI_vec_pack_ssat])
+#define vec_pack_usat_optab (&optab_table[OTI_vec_pack_usat])
+#define vec_pack_sfix_trunc_optab (&optab_table[OTI_vec_pack_sfix_trunc])
+#define vec_pack_ufix_trunc_optab (&optab_table[OTI_vec_pack_ufix_trunc])
+
+#define powi_optab (&optab_table[OTI_powi])
/* Conversion optabs have their own table and indexes. */
enum convert_optab_index
COI_lfloor,
COI_lceil,
+ COI_fract,
+ COI_fractuns,
+ COI_satfract,
+ COI_satfractuns,
+
+ COI_vec_load_lanes,
+ COI_vec_store_lanes,
+
COI_MAX
};
-extern GTY(()) convert_optab convert_optab_table[COI_MAX];
-
-#define sext_optab (convert_optab_table[COI_sext])
-#define zext_optab (convert_optab_table[COI_zext])
-#define trunc_optab (convert_optab_table[COI_trunc])
-#define sfix_optab (convert_optab_table[COI_sfix])
-#define ufix_optab (convert_optab_table[COI_ufix])
-#define sfixtrunc_optab (convert_optab_table[COI_sfixtrunc])
-#define ufixtrunc_optab (convert_optab_table[COI_ufixtrunc])
-#define sfloat_optab (convert_optab_table[COI_sfloat])
-#define ufloat_optab (convert_optab_table[COI_ufloat])
-#define lrint_optab (convert_optab_table[COI_lrint])
-#define lround_optab (convert_optab_table[COI_lround])
-#define lfloor_optab (convert_optab_table[COI_lfloor])
-#define lceil_optab (convert_optab_table[COI_lceil])
-
-/* These arrays record the insn_code of insns that may be needed to
- perform input and output reloads of special objects. They provide a
- place to pass a scratch register. */
-extern enum insn_code reload_in_optab[NUM_MACHINE_MODES];
-extern enum insn_code reload_out_optab[NUM_MACHINE_MODES];
+#define sext_optab (&convert_optab_table[COI_sext])
+#define zext_optab (&convert_optab_table[COI_zext])
+#define trunc_optab (&convert_optab_table[COI_trunc])
+#define sfix_optab (&convert_optab_table[COI_sfix])
+#define ufix_optab (&convert_optab_table[COI_ufix])
+#define sfixtrunc_optab (&convert_optab_table[COI_sfixtrunc])
+#define ufixtrunc_optab (&convert_optab_table[COI_ufixtrunc])
+#define sfloat_optab (&convert_optab_table[COI_sfloat])
+#define ufloat_optab (&convert_optab_table[COI_ufloat])
+#define lrint_optab (&convert_optab_table[COI_lrint])
+#define lround_optab (&convert_optab_table[COI_lround])
+#define lfloor_optab (&convert_optab_table[COI_lfloor])
+#define lceil_optab (&convert_optab_table[COI_lceil])
+#define fract_optab (&convert_optab_table[COI_fract])
+#define fractuns_optab (&convert_optab_table[COI_fractuns])
+#define satfract_optab (&convert_optab_table[COI_satfract])
+#define satfractuns_optab (&convert_optab_table[COI_satfractuns])
+#define vec_load_lanes_optab (&convert_optab_table[COI_vec_load_lanes])
+#define vec_store_lanes_optab (&convert_optab_table[COI_vec_store_lanes])
/* Contains the optab used for each rtx code. */
-extern GTY(()) optab code_to_optab[NUM_RTX_CODE + 1];
+extern optab code_to_optab[NUM_RTX_CODE + 1];
\f
typedef rtx (*rtxfun) (rtx);
-/* Indexed by the rtx-code for a conditional (e.g. EQ, LT,...)
- gives the gen_function to make a branch to test that condition. */
-
-extern rtxfun bcc_gen_fctn[NUM_RTX_CODE];
+/* Enumerates operations that have a named .md pattern associated
+ with them, but which are not implemented as library functions. */
+enum direct_optab_index
+{
+#ifdef HAVE_conditional_move
+ /* Conditional move operations. */
+ DOI_movcc,
+#endif
-/* Indexed by the rtx-code for a conditional (e.g. EQ, LT,...)
- gives the insn code to make a store-condition insn
- to test that condition. */
+ /* Operations that use a scratch register to perform input and output
+ reloads of special objects. */
+ DOI_reload_in,
+ DOI_reload_out,
+
+ /* Vector conditional operations. */
+ DOI_vcond,
+ DOI_vcondu,
+
+ /* Block move operation. */
+ DOI_movmem,
+
+ /* Block set operation. */
+ DOI_setmem,
+
+ /* Various types of block compare operation. */
+ DOI_cmpstr,
+ DOI_cmpstrn,
+ DOI_cmpmem,
+
+ /* Synchronization primitives. This first set is atomic operation for
+ which we don't care about the resulting value. */
+ DOI_sync_add,
+ DOI_sync_sub,
+ DOI_sync_ior,
+ DOI_sync_and,
+ DOI_sync_xor,
+ DOI_sync_nand,
+
+ /* This second set is atomic operations in which we return the value
+ that existed in memory before the operation. */
+ DOI_sync_old_add,
+ DOI_sync_old_sub,
+ DOI_sync_old_ior,
+ DOI_sync_old_and,
+ DOI_sync_old_xor,
+ DOI_sync_old_nand,
+
+ /* This third set is atomic operations in which we return the value
+ that resulted after performing the operation. */
+ DOI_sync_new_add,
+ DOI_sync_new_sub,
+ DOI_sync_new_ior,
+ DOI_sync_new_and,
+ DOI_sync_new_xor,
+ DOI_sync_new_nand,
+
+ /* Atomic compare and swap. */
+ DOI_sync_compare_and_swap,
+
+ /* Atomic exchange with acquire semantics. */
+ DOI_sync_lock_test_and_set,
+
+ /* Atomic clear with release semantics. */
+ DOI_sync_lock_release,
+
+ DOI_MAX
+};
-extern enum insn_code setcc_gen_code[NUM_RTX_CODE];
+/* A structure that says which insn should be used to perform an operation
+ in a particular mode. */
+struct direct_optab_d
+{
+ struct optab_handlers handlers[NUM_MACHINE_MODES];
+};
+typedef struct direct_optab_d *direct_optab;
#ifdef HAVE_conditional_move
-/* Indexed by the machine mode, gives the insn code to make a conditional
- move insn. */
-
-extern enum insn_code movcc_gen_code[NUM_MACHINE_MODES];
+#define movcc_optab (&direct_optab_table[(int) DOI_movcc])
#endif
+#define reload_in_optab (&direct_optab_table[(int) DOI_reload_in])
+#define reload_out_optab (&direct_optab_table[(int) DOI_reload_out])
+#define vcond_optab (&direct_optab_table[(int) DOI_vcond])
+#define vcondu_optab (&direct_optab_table[(int) DOI_vcondu])
+#define movmem_optab (&direct_optab_table[(int) DOI_movmem])
+#define setmem_optab (&direct_optab_table[(int) DOI_setmem])
+#define cmpstr_optab (&direct_optab_table[(int) DOI_cmpstr])
+#define cmpstrn_optab (&direct_optab_table[(int) DOI_cmpstrn])
+#define cmpmem_optab (&direct_optab_table[(int) DOI_cmpmem])
+#define sync_add_optab (&direct_optab_table[(int) DOI_sync_add])
+#define sync_sub_optab (&direct_optab_table[(int) DOI_sync_sub])
+#define sync_ior_optab (&direct_optab_table[(int) DOI_sync_ior])
+#define sync_and_optab (&direct_optab_table[(int) DOI_sync_and])
+#define sync_xor_optab (&direct_optab_table[(int) DOI_sync_xor])
+#define sync_nand_optab (&direct_optab_table[(int) DOI_sync_nand])
+#define sync_old_add_optab (&direct_optab_table[(int) DOI_sync_old_add])
+#define sync_old_sub_optab (&direct_optab_table[(int) DOI_sync_old_sub])
+#define sync_old_ior_optab (&direct_optab_table[(int) DOI_sync_old_ior])
+#define sync_old_and_optab (&direct_optab_table[(int) DOI_sync_old_and])
+#define sync_old_xor_optab (&direct_optab_table[(int) DOI_sync_old_xor])
+#define sync_old_nand_optab (&direct_optab_table[(int) DOI_sync_old_nand])
+#define sync_new_add_optab (&direct_optab_table[(int) DOI_sync_new_add])
+#define sync_new_sub_optab (&direct_optab_table[(int) DOI_sync_new_sub])
+#define sync_new_ior_optab (&direct_optab_table[(int) DOI_sync_new_ior])
+#define sync_new_and_optab (&direct_optab_table[(int) DOI_sync_new_and])
+#define sync_new_xor_optab (&direct_optab_table[(int) DOI_sync_new_xor])
+#define sync_new_nand_optab (&direct_optab_table[(int) DOI_sync_new_nand])
+#define sync_compare_and_swap_optab \
+ (&direct_optab_table[(int) DOI_sync_compare_and_swap])
+#define sync_lock_test_and_set_optab \
+ (&direct_optab_table[(int) DOI_sync_lock_test_and_set])
+#define sync_lock_release_optab \
+ (&direct_optab_table[(int) DOI_sync_lock_release])
+\f
+/* Target-dependent globals. */
+struct target_optabs {
+ /* Tables of patterns that may have an associated libcall. */
+ struct optab_d x_optab_table[(int) OTI_MAX];
+
+ /* Tables of patterns for converting one mode to another. */
+ struct convert_optab_d x_convert_optab_table[(int) COI_MAX];
-/* Indexed by the machine mode, gives the insn code for vector conditional
- operation. */
-
-extern enum insn_code vcond_gen_code[NUM_MACHINE_MODES];
-extern enum insn_code vcondu_gen_code[NUM_MACHINE_MODES];
-
-/* This array records the insn_code of insns to perform block moves. */
-extern enum insn_code movmem_optab[NUM_MACHINE_MODES];
-
-/* This array records the insn_code of insns to perform block sets. */
-extern enum insn_code setmem_optab[NUM_MACHINE_MODES];
-
-/* These arrays record the insn_code of two different kinds of insns
- to perform block compares. */
-extern enum insn_code cmpstr_optab[NUM_MACHINE_MODES];
-extern enum insn_code cmpstrn_optab[NUM_MACHINE_MODES];
-extern enum insn_code cmpmem_optab[NUM_MACHINE_MODES];
-
-/* Synchronization primitives. This first set is atomic operation for
- which we don't care about the resulting value. */
-extern enum insn_code sync_add_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_sub_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_ior_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_and_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_xor_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_nand_optab[NUM_MACHINE_MODES];
-
-/* This second set is atomic operations in which we return the value
- that existed in memory before the operation. */
-extern enum insn_code sync_old_add_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_old_sub_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_old_ior_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_old_and_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_old_xor_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_old_nand_optab[NUM_MACHINE_MODES];
-
-/* This third set is atomic operations in which we return the value
- that resulted after performing the operation. */
-extern enum insn_code sync_new_add_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_new_sub_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_new_ior_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_new_and_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_new_xor_optab[NUM_MACHINE_MODES];
-extern enum insn_code sync_new_nand_optab[NUM_MACHINE_MODES];
-
-/* Atomic compare and swap. */
-extern enum insn_code sync_compare_and_swap[NUM_MACHINE_MODES];
-extern enum insn_code sync_compare_and_swap_cc[NUM_MACHINE_MODES];
-
-/* Atomic exchange with acquire semantics. */
-extern enum insn_code sync_lock_test_and_set[NUM_MACHINE_MODES];
-
-/* Atomic clear with release semantics. */
-extern enum insn_code sync_lock_release[NUM_MACHINE_MODES];
+ /* Tables of patterns for direct optabs (i.e. those which cannot be
+ implemented using a libcall). */
+ struct direct_optab_d x_direct_optab_table[(int) DOI_MAX];
+};
+
+extern struct target_optabs default_target_optabs;
+#if SWITCHABLE_TARGET
+extern struct target_optabs *this_target_optabs;
+#else
+#define this_target_optabs (&default_target_optabs)
+#endif
+#define optab_table \
+ (this_target_optabs->x_optab_table)
+#define convert_optab_table \
+ (this_target_optabs->x_convert_optab_table)
+#define direct_optab_table \
+ (this_target_optabs->x_direct_optab_table)
+\f
/* Define functions given in optabs.c. */
-extern rtx expand_widen_pattern_expr (tree exp, rtx op0, rtx op1, rtx wide_op,
+extern rtx expand_widen_pattern_expr (sepops ops, rtx op0, rtx op1, rtx wide_op,
rtx target, int unsignedp);
extern rtx expand_ternary_op (enum machine_mode mode, optab ternary_optab,
extern rtx expand_abs_nojump (enum machine_mode, rtx, rtx, int);
extern rtx expand_abs (enum machine_mode, rtx, rtx, int, int);
+/* Expand the one's complement absolute value operation. */
+extern rtx expand_one_cmpl_abs_nojump (enum machine_mode, rtx, rtx);
+
/* Expand the copysign operation. */
extern rtx expand_copysign (rtx, rtx, rtx);
/* Generate an instruction with a given INSN_CODE with an output and
an input. */
-extern void emit_unop_insn (int, rtx, rtx, enum rtx_code);
-
-/* Excapsulate the block in REG_LIBCALL, and REG_RETVAL reg notes and add
- REG_LIBCALL_ID notes to all insns in block. */
-extern void maybe_encapsulate_block (rtx, rtx, rtx);
+extern void emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code);
+extern bool maybe_emit_unop_insn (enum insn_code, rtx, rtx, enum rtx_code);
-/* Emit code to perform a series of operations on a multi-word quantity, one
- word at a time. */
-extern rtx emit_no_conflict_block (rtx, rtx, rtx, rtx, rtx);
+/* An extra flag to control optab_for_tree_code's behavior. This is needed to
+ distinguish between machines with a vector shift that takes a scalar for the
+ shift amount vs. machines that take a vector for the shift amount. */
+enum optab_subtype
+{
+ optab_default,
+ optab_scalar,
+ optab_vector
+};
-/* Emit one rtl insn to compare two rtx's. */
-extern void emit_cmp_insn (rtx, rtx, enum rtx_code, rtx, enum machine_mode,
- int);
+/* Return the optab used for computing the given operation on the type given by
+ the second argument. The third argument distinguishes between the types of
+ vector shifts and rotates */
+extern optab optab_for_tree_code (enum tree_code, const_tree, enum optab_subtype);
/* The various uses that a comparison can have; used by can_compare_p:
jumps, conditional moves, store flag operations. */
ccp_store_flag
};
-/* Return the optab used for computing the given operation on the type
- given by the second argument. */
-extern optab optab_for_tree_code (enum tree_code, tree);
-
/* Nonzero if a compare of mode MODE can be done straightforwardly
(without splitting it into pieces). */
extern int can_compare_p (enum rtx_code, enum machine_mode,
extern void set_conv_libfunc (convert_optab, enum machine_mode,
enum machine_mode, const char *);
+/* Generate code for a FIXED_CONVERT_EXPR. */
+extern void expand_fixed_convert (rtx, rtx, int, int);
+
/* Generate code for a FLOAT_EXPR. */
extern void expand_float (rtx, rtx, int);
/* Generate code for float to integral conversion. */
extern bool expand_sfix_optab (rtx, rtx, convert_optab);
+/* Generate code for a widening multiply. */
+extern rtx expand_widening_mult (enum machine_mode, rtx, rtx, rtx, int, optab);
+
/* Return tree if target supports vector operations for COND_EXPR. */
bool expand_vec_cond_expr_p (tree, enum machine_mode);
/* Generate code for VEC_COND_EXPR. */
-extern rtx expand_vec_cond_expr (tree, rtx);
-
+extern rtx expand_vec_cond_expr (tree, tree, tree, tree, rtx);
/* Generate code for VEC_LSHIFT_EXPR and VEC_RSHIFT_EXPR. */
-extern rtx expand_vec_shift_expr (tree, rtx);
+extern rtx expand_vec_shift_expr (sepops, rtx);
+
+/* Return the insn used to implement mode MODE of OP, or CODE_FOR_nothing
+ if the target does not have such an insn. */
+
+static inline enum insn_code
+optab_handler (optab op, enum machine_mode mode)
+{
+ return (enum insn_code) (op->handlers[(int) mode].insn_code
+ + (int) CODE_FOR_nothing);
+}
+
+/* Record that insn CODE should be used to implement mode MODE of OP. */
+
+static inline void
+set_optab_handler (optab op, enum machine_mode mode, enum insn_code code)
+{
+ op->handlers[(int) mode].insn_code = (int) code - (int) CODE_FOR_nothing;
+}
+
+/* Return the insn used to perform conversion OP from mode FROM_MODE
+ to mode TO_MODE; return CODE_FOR_nothing if the target does not have
+ such an insn. */
+
+static inline enum insn_code
+convert_optab_handler (convert_optab op, enum machine_mode to_mode,
+ enum machine_mode from_mode)
+{
+ return ((enum insn_code)
+ (op->handlers[(int) to_mode][(int) from_mode].insn_code
+ + (int) CODE_FOR_nothing));
+}
-#define optab_handler(optab,mode) (&(optab)->handlers[(int) (mode)])
-#define convert_optab_handler(optab,mode,mode2) \
- (&(optab)->handlers[(int) (mode)][(int) (mode2)])
+/* Record that insn CODE should be used to perform conversion OP
+ from mode FROM_MODE to mode TO_MODE. */
+
+static inline void
+set_convert_optab_handler (convert_optab op, enum machine_mode to_mode,
+ enum machine_mode from_mode, enum insn_code code)
+{
+ op->handlers[(int) to_mode][(int) from_mode].insn_code
+ = (int) code - (int) CODE_FOR_nothing;
+}
+
+/* Return the insn used to implement mode MODE of OP, or CODE_FOR_nothing
+ if the target does not have such an insn. */
+
+static inline enum insn_code
+direct_optab_handler (direct_optab op, enum machine_mode mode)
+{
+ return (enum insn_code) (op->handlers[(int) mode].insn_code
+ + (int) CODE_FOR_nothing);
+}
+
+/* Record that insn CODE should be used to implement mode MODE of OP. */
+
+static inline void
+set_direct_optab_handler (direct_optab op, enum machine_mode mode,
+ enum insn_code code)
+{
+ op->handlers[(int) mode].insn_code = (int) code - (int) CODE_FOR_nothing;
+}
+
+extern rtx optab_libfunc (optab optab, enum machine_mode mode);
+extern rtx convert_optab_libfunc (convert_optab optab, enum machine_mode mode1,
+ enum machine_mode mode2);
+
+extern bool insn_operand_matches (enum insn_code icode, unsigned int opno,
+ rtx operand);
+
+/* Describes the type of an expand_operand. Each value is associated
+ with a create_*_operand function; see the comments above those
+ functions for details. */
+enum expand_operand_type {
+ EXPAND_FIXED,
+ EXPAND_OUTPUT,
+ EXPAND_INPUT,
+ EXPAND_CONVERT_TO,
+ EXPAND_CONVERT_FROM,
+ EXPAND_ADDRESS,
+ EXPAND_INTEGER
+};
+
+/* Information about an operand for instruction expansion. */
+struct expand_operand {
+ /* The type of operand. */
+ ENUM_BITFIELD (expand_operand_type) type : 8;
+
+ /* True if any conversion should treat VALUE as being unsigned
+ rather than signed. Only meaningful for certain types. */
+ unsigned int unsigned_p : 1;
+
+ /* Unused; available for future use. */
+ unsigned int unused : 7;
+
+ /* The mode passed to the convert_*_operand function. It has a
+ type-dependent meaning. */
+ ENUM_BITFIELD (machine_mode) mode : 16;
+
+ /* The value of the operand. */
+ rtx value;
+};
+
+/* Initialize OP with the given fields. Initialise the other fields
+ to their default values. */
+
+static inline void
+create_expand_operand (struct expand_operand *op,
+ enum expand_operand_type type,
+ rtx value, enum machine_mode mode,
+ bool unsigned_p)
+{
+ op->type = type;
+ op->unsigned_p = unsigned_p;
+ op->unused = 0;
+ op->mode = mode;
+ op->value = value;
+}
+
+/* Make OP describe an operand that must use rtx X, even if X is volatile. */
+
+static inline void
+create_fixed_operand (struct expand_operand *op, rtx x)
+{
+ create_expand_operand (op, EXPAND_FIXED, x, VOIDmode, false);
+}
+
+/* Make OP describe an output operand that must have mode MODE.
+ X, if nonnull, is a suggestion for where the output should be stored.
+ It is OK for VALUE to be inconsistent with MODE, although it will just
+ be ignored in that case. */
+
+static inline void
+create_output_operand (struct expand_operand *op, rtx x,
+ enum machine_mode mode)
+{
+ create_expand_operand (op, EXPAND_OUTPUT, x, mode, false);
+}
+
+/* Make OP describe an input operand that must have mode MODE and
+ value VALUE; MODE cannot be VOIDmode. The backend may request that
+ VALUE be copied into a different kind of rtx before being passed
+ as an operand. */
+
+static inline void
+create_input_operand (struct expand_operand *op, rtx value,
+ enum machine_mode mode)
+{
+ create_expand_operand (op, EXPAND_INPUT, value, mode, false);
+}
+
+/* Like create_input_operand, except that VALUE must first be converted
+ to mode MODE. UNSIGNED_P says whether VALUE is unsigned. */
+
+static inline void
+create_convert_operand_to (struct expand_operand *op, rtx value,
+ enum machine_mode mode, bool unsigned_p)
+{
+ create_expand_operand (op, EXPAND_CONVERT_TO, value, mode, unsigned_p);
+}
+
+/* Make OP describe an input operand that should have the same value
+ as VALUE, after any mode conversion that the backend might request.
+ If VALUE is a CONST_INT, it should be treated as having mode MODE.
+ UNSIGNED_P says whether VALUE is unsigned. */
+
+static inline void
+create_convert_operand_from (struct expand_operand *op, rtx value,
+ enum machine_mode mode, bool unsigned_p)
+{
+ create_expand_operand (op, EXPAND_CONVERT_FROM, value, mode, unsigned_p);
+}
+
+extern void create_convert_operand_from_type (struct expand_operand *op,
+ rtx value, tree type);
+
+/* Make OP describe an input Pmode address operand. VALUE is the value
+ of the address, but it may need to be converted to Pmode first. */
+
+static inline void
+create_address_operand (struct expand_operand *op, rtx value)
+{
+ create_expand_operand (op, EXPAND_ADDRESS, value, Pmode, false);
+}
+
+/* Make OP describe an input operand that has value INTVAL and that has
+ no inherent mode. This function should only be used for operands that
+ are always expand-time constants. The backend may request that INTVAL
+ be copied into a different kind of rtx, but it must specify the mode
+ of that rtx if so. */
+
+static inline void
+create_integer_operand (struct expand_operand *op, HOST_WIDE_INT intval)
+{
+ create_expand_operand (op, EXPAND_INTEGER, GEN_INT (intval), VOIDmode, false);
+}
+
+extern bool maybe_legitimize_operands (enum insn_code icode,
+ unsigned int opno, unsigned int nops,
+ struct expand_operand *ops);
+extern rtx maybe_gen_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern bool maybe_expand_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern bool maybe_expand_jump_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern void expand_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+extern void expand_jump_insn (enum insn_code icode, unsigned int nops,
+ struct expand_operand *ops);
+
+extern rtx prepare_operand (enum insn_code, rtx, int, enum machine_mode,
+ enum machine_mode, int);
#endif /* GCC_OPTABS_H */