/* Generic partial redundancy elimination with lazy code motion support.
- Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
This file is part of GCC.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
/* These routines are meant to be used by various optimization
passes which can be modeled as lazy code motion problems.
#include "insn-attr.h"
/* Edge based LCM routines. */
-static void compute_antinout_edge PARAMS ((sbitmap *, sbitmap *,
- sbitmap *, sbitmap *));
-static void compute_earliest PARAMS ((struct edge_list *, int,
- sbitmap *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
-static void compute_laterin PARAMS ((struct edge_list *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
-static void compute_insert_delete PARAMS ((struct edge_list *edge_list,
- sbitmap *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
+static void compute_antinout_edge (sbitmap *, sbitmap *, sbitmap *, sbitmap *);
+static void compute_earliest (struct edge_list *, int, sbitmap *, sbitmap *,
+ sbitmap *, sbitmap *, sbitmap *);
+static void compute_laterin (struct edge_list *, sbitmap *, sbitmap *,
+ sbitmap *, sbitmap *);
+static void compute_insert_delete (struct edge_list *edge_list, sbitmap *,
+ sbitmap *, sbitmap *, sbitmap *, sbitmap *);
/* Edge based LCM routines on a reverse flowgraph. */
-static void compute_farthest PARAMS ((struct edge_list *, int,
- sbitmap *, sbitmap *,
- sbitmap*, sbitmap *,
- sbitmap *));
-static void compute_nearerout PARAMS ((struct edge_list *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
-static void compute_rev_insert_delete PARAMS ((struct edge_list *edge_list,
- sbitmap *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
+static void compute_farthest (struct edge_list *, int, sbitmap *, sbitmap *,
+ sbitmap*, sbitmap *, sbitmap *);
+static void compute_nearerout (struct edge_list *, sbitmap *, sbitmap *,
+ sbitmap *, sbitmap *);
+static void compute_rev_insert_delete (struct edge_list *edge_list, sbitmap *,
+ sbitmap *, sbitmap *, sbitmap *,
+ sbitmap *);
\f
/* Edge based lcm routines. */
Other than that, its pretty much identical to compute_antinout. */
static void
-compute_antinout_edge (antloc, transp, antin, antout)
- sbitmap *antloc;
- sbitmap *transp;
- sbitmap *antin;
- sbitmap *antout;
+compute_antinout_edge (sbitmap *antloc, sbitmap *transp, sbitmap *antin,
+ sbitmap *antout)
{
basic_block bb;
edge e;
basic_block *worklist, *qin, *qout, *qend;
unsigned int qlen;
+ edge_iterator ei;
/* Allocate a worklist array/queue. Entries are only added to the
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
- qin = qout = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * n_basic_blocks);
+ qin = qout = worklist = XNEWVEC (basic_block, n_basic_blocks);
/* We want a maximal solution, so make an optimistic initialization of
ANTIN. */
}
qin = worklist;
- qend = &worklist[n_basic_blocks];
- qlen = n_basic_blocks;
+ qend = &worklist[n_basic_blocks - NUM_FIXED_BLOCKS];
+ qlen = n_basic_blocks - NUM_FIXED_BLOCKS;
/* Mark blocks which are predecessors of the exit block so that we
can easily identify them below. */
- for (e = EXIT_BLOCK_PTR->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
e->src->aux = EXIT_BLOCK_PTR;
/* Iterate until the worklist is empty. */
/* If the in state of this block changed, then we need
to add the predecessors of this block to the worklist
if they are not already on the worklist. */
- for (e = bb->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, bb->preds)
if (!e->src->aux && e->src != ENTRY_BLOCK_PTR)
{
*qin++ = e->src;
/* Compute the earliest vector for edge based lcm. */
static void
-compute_earliest (edge_list, n_exprs, antin, antout, avout, kill, earliest)
- struct edge_list *edge_list;
- int n_exprs;
- sbitmap *antin, *antout, *avout, *kill, *earliest;
+compute_earliest (struct edge_list *edge_list, int n_exprs, sbitmap *antin,
+ sbitmap *antout, sbitmap *avout, sbitmap *kill,
+ sbitmap *earliest)
{
sbitmap difference, temp_bitmap;
int x, num_edges;
to compute it. */
static void
-compute_laterin (edge_list, earliest, antloc, later, laterin)
- struct edge_list *edge_list;
- sbitmap *earliest, *antloc, *later, *laterin;
+compute_laterin (struct edge_list *edge_list, sbitmap *earliest,
+ sbitmap *antloc, sbitmap *later, sbitmap *laterin)
{
int num_edges, i;
edge e;
basic_block *worklist, *qin, *qout, *qend, bb;
unsigned int qlen;
+ edge_iterator ei;
num_edges = NUM_EDGES (edge_list);
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
qin = qout = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * (n_basic_blocks + 1));
+ = XNEWVEC (basic_block, n_basic_blocks);
/* Initialize a mapping from each edge to its index. */
for (i = 0; i < num_edges; i++)
do not want to be overly optimistic. Consider an outgoing edge from
the entry block. That edge should always have a LATER value the
same as EARLIEST for that edge. */
- for (e = ENTRY_BLOCK_PTR->succ; e; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR->succs)
sbitmap_copy (later[(size_t) e->aux], earliest[(size_t) e->aux]);
/* Add all the blocks to the worklist. This prevents an early exit from
*qin++ = bb;
bb->aux = bb;
}
- qin = worklist;
+
/* Note that we do not use the last allocated element for our queue,
- as EXIT_BLOCK is never inserted into it. In fact the above allocation
- of n_basic_blocks + 1 elements is not necessary. */
- qend = &worklist[n_basic_blocks];
- qlen = n_basic_blocks;
+ as EXIT_BLOCK is never inserted into it. */
+ qin = worklist;
+ qend = &worklist[n_basic_blocks - NUM_FIXED_BLOCKS];
+ qlen = n_basic_blocks - NUM_FIXED_BLOCKS;
/* Iterate until the worklist is empty. */
while (qlen)
/* Compute the intersection of LATERIN for each incoming edge to B. */
sbitmap_ones (laterin[bb->index]);
- for (e = bb->pred; e != NULL; e = e->pred_next)
- sbitmap_a_and_b (laterin[bb->index], laterin[bb->index], later[(size_t)e->aux]);
+ FOR_EACH_EDGE (e, ei, bb->preds)
+ sbitmap_a_and_b (laterin[bb->index], laterin[bb->index],
+ later[(size_t)e->aux]);
/* Calculate LATER for all outgoing edges. */
- for (e = bb->succ; e != NULL; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, bb->succs)
if (sbitmap_union_of_diff_cg (later[(size_t) e->aux],
earliest[(size_t) e->aux],
laterin[e->src->index],
for the EXIT block. We allocated an extra entry in the LATERIN array
for just this purpose. */
sbitmap_ones (laterin[last_basic_block]);
- for (e = EXIT_BLOCK_PTR->pred; e != NULL; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
sbitmap_a_and_b (laterin[last_basic_block],
laterin[last_basic_block],
later[(size_t) e->aux]);
/* Compute the insertion and deletion points for edge based LCM. */
static void
-compute_insert_delete (edge_list, antloc, later, laterin,
- insert, delete)
- struct edge_list *edge_list;
- sbitmap *antloc, *later, *laterin, *insert, *delete;
+compute_insert_delete (struct edge_list *edge_list, sbitmap *antloc,
+ sbitmap *later, sbitmap *laterin, sbitmap *insert,
+ sbitmap *delete)
{
int x;
basic_block bb;
FOR_EACH_BB (bb)
- sbitmap_difference (delete[bb->index], antloc[bb->index], laterin[bb->index]);
+ sbitmap_difference (delete[bb->index], antloc[bb->index],
+ laterin[bb->index]);
for (x = 0; x < NUM_EDGES (edge_list); x++)
{
map the insert vector to what edge an expression should be inserted on. */
struct edge_list *
-pre_edge_lcm (file, n_exprs, transp, avloc, antloc, kill, insert, delete)
- FILE *file ATTRIBUTE_UNUSED;
- int n_exprs;
- sbitmap *transp;
- sbitmap *avloc;
- sbitmap *antloc;
- sbitmap *kill;
- sbitmap **insert;
- sbitmap **delete;
+pre_edge_lcm (int n_exprs, sbitmap *transp,
+ sbitmap *avloc, sbitmap *antloc, sbitmap *kill,
+ sbitmap **insert, sbitmap **delete)
{
sbitmap *antin, *antout, *earliest;
sbitmap *avin, *avout;
num_edges = NUM_EDGES (edge_list);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- fprintf (file, "Edge List:\n");
- verify_edge_list (file, edge_list);
- print_edge_list (file, edge_list);
- dump_sbitmap_vector (file, "transp", "", transp, last_basic_block);
- dump_sbitmap_vector (file, "antloc", "", antloc, last_basic_block);
- dump_sbitmap_vector (file, "avloc", "", avloc, last_basic_block);
- dump_sbitmap_vector (file, "kill", "", kill, last_basic_block);
+ fprintf (dump_file, "Edge List:\n");
+ verify_edge_list (dump_file, edge_list);
+ print_edge_list (dump_file, edge_list);
+ dump_sbitmap_vector (dump_file, "transp", "", transp, last_basic_block);
+ dump_sbitmap_vector (dump_file, "antloc", "", antloc, last_basic_block);
+ dump_sbitmap_vector (dump_file, "avloc", "", avloc, last_basic_block);
+ dump_sbitmap_vector (dump_file, "kill", "", kill, last_basic_block);
}
#endif
compute_antinout_edge (antloc, transp, antin, antout);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- dump_sbitmap_vector (file, "antin", "", antin, last_basic_block);
- dump_sbitmap_vector (file, "antout", "", antout, last_basic_block);
+ dump_sbitmap_vector (dump_file, "antin", "", antin, last_basic_block);
+ dump_sbitmap_vector (dump_file, "antout", "", antout, last_basic_block);
}
#endif
compute_earliest (edge_list, n_exprs, antin, antout, avout, kill, earliest);
#ifdef LCM_DEBUG_INFO
- if (file)
- dump_sbitmap_vector (file, "earliest", "", earliest, num_edges);
+ if (dump_file)
+ dump_sbitmap_vector (dump_file, "earliest", "", earliest, num_edges);
#endif
sbitmap_vector_free (antout);
compute_laterin (edge_list, earliest, antloc, later, laterin);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- dump_sbitmap_vector (file, "laterin", "", laterin, last_basic_block + 1);
- dump_sbitmap_vector (file, "later", "", later, num_edges);
+ dump_sbitmap_vector (dump_file, "laterin", "", laterin, last_basic_block + 1);
+ dump_sbitmap_vector (dump_file, "later", "", later, num_edges);
}
#endif
sbitmap_vector_free (later);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- dump_sbitmap_vector (file, "pre_insert_map", "", *insert, num_edges);
- dump_sbitmap_vector (file, "pre_delete_map", "", *delete,
+ dump_sbitmap_vector (dump_file, "pre_insert_map", "", *insert, num_edges);
+ dump_sbitmap_vector (dump_file, "pre_delete_map", "", *delete,
last_basic_block);
}
#endif
Return the number of passes we performed to iterate to a solution. */
void
-compute_available (avloc, kill, avout, avin)
- sbitmap *avloc, *kill, *avout, *avin;
+compute_available (sbitmap *avloc, sbitmap *kill, sbitmap *avout,
+ sbitmap *avin)
{
edge e;
basic_block *worklist, *qin, *qout, *qend, bb;
unsigned int qlen;
+ edge_iterator ei;
/* Allocate a worklist array/queue. Entries are only added to the
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
- qin = qout = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * n_basic_blocks);
+ qin = qout = worklist =
+ XNEWVEC (basic_block, n_basic_blocks - NUM_FIXED_BLOCKS);
/* We want a maximal solution. */
sbitmap_vector_ones (avout, last_basic_block);
}
qin = worklist;
- qend = &worklist[n_basic_blocks];
- qlen = n_basic_blocks;
+ qend = &worklist[n_basic_blocks - NUM_FIXED_BLOCKS];
+ qlen = n_basic_blocks - NUM_FIXED_BLOCKS;
/* Mark blocks which are successors of the entry block so that we
can easily identify them below. */
- for (e = ENTRY_BLOCK_PTR->succ; e; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR->succs)
e->dest->aux = ENTRY_BLOCK_PTR;
/* Iterate until the worklist is empty. */
sbitmap_intersection_of_preds (avin[bb->index], avout, bb->index);
}
- if (sbitmap_union_of_diff_cg (avout[bb->index], avloc[bb->index], avin[bb->index], kill[bb->index]))
+ if (sbitmap_union_of_diff_cg (avout[bb->index], avloc[bb->index],
+ avin[bb->index], kill[bb->index]))
/* If the out state of this block changed, then we need
to add the successors of this block to the worklist
if they are not already on the worklist. */
- for (e = bb->succ; e; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, bb->succs)
if (!e->dest->aux && e->dest != EXIT_BLOCK_PTR)
{
*qin++ = e->dest;
/* Compute the farthest vector for edge based lcm. */
static void
-compute_farthest (edge_list, n_exprs, st_avout, st_avin, st_antin,
- kill, farthest)
- struct edge_list *edge_list;
- int n_exprs;
- sbitmap *st_avout, *st_avin, *st_antin, *kill, *farthest;
+compute_farthest (struct edge_list *edge_list, int n_exprs,
+ sbitmap *st_avout, sbitmap *st_avin, sbitmap *st_antin,
+ sbitmap *kill, sbitmap *farthest)
{
sbitmap difference, temp_bitmap;
int x, num_edges;
implementation can be found before compute_laterin. */
static void
-compute_nearerout (edge_list, farthest, st_avloc, nearer, nearerout)
- struct edge_list *edge_list;
- sbitmap *farthest, *st_avloc, *nearer, *nearerout;
+compute_nearerout (struct edge_list *edge_list, sbitmap *farthest,
+ sbitmap *st_avloc, sbitmap *nearer, sbitmap *nearerout)
{
int num_edges, i;
edge e;
basic_block *worklist, *tos, bb;
+ edge_iterator ei;
num_edges = NUM_EDGES (edge_list);
/* Allocate a worklist array/queue. Entries are only added to the
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
- tos = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * (n_basic_blocks + 1));
+ tos = worklist = XNEWVEC (basic_block, n_basic_blocks + 1);
/* Initialize NEARER for each edge and build a mapping from an edge to
its index. */
do not want to be overly optimistic. Consider an incoming edge to
the exit block. That edge should always have a NEARER value the
same as FARTHEST for that edge. */
- for (e = EXIT_BLOCK_PTR->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
sbitmap_copy (nearer[(size_t)e->aux], farthest[(size_t)e->aux]);
/* Add all the blocks to the worklist. This prevents an early exit
/* Compute the intersection of NEARER for each outgoing edge from B. */
sbitmap_ones (nearerout[bb->index]);
- for (e = bb->succ; e != NULL; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, bb->succs)
sbitmap_a_and_b (nearerout[bb->index], nearerout[bb->index],
nearer[(size_t) e->aux]);
/* Calculate NEARER for all incoming edges. */
- for (e = bb->pred; e != NULL; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, bb->preds)
if (sbitmap_union_of_diff_cg (nearer[(size_t) e->aux],
farthest[(size_t) e->aux],
nearerout[e->dest->index],
for the ENTRY block. We allocated an extra entry in the NEAREROUT array
for just this purpose. */
sbitmap_ones (nearerout[last_basic_block]);
- for (e = ENTRY_BLOCK_PTR->succ; e != NULL; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR->succs)
sbitmap_a_and_b (nearerout[last_basic_block],
nearerout[last_basic_block],
nearer[(size_t) e->aux]);
/* Compute the insertion and deletion points for edge based LCM. */
static void
-compute_rev_insert_delete (edge_list, st_avloc, nearer, nearerout,
- insert, delete)
- struct edge_list *edge_list;
- sbitmap *st_avloc, *nearer, *nearerout, *insert, *delete;
+compute_rev_insert_delete (struct edge_list *edge_list, sbitmap *st_avloc,
+ sbitmap *nearer, sbitmap *nearerout,
+ sbitmap *insert, sbitmap *delete)
{
int x;
basic_block bb;
FOR_EACH_BB (bb)
- sbitmap_difference (delete[bb->index], st_avloc[bb->index], nearerout[bb->index]);
+ sbitmap_difference (delete[bb->index], st_avloc[bb->index],
+ nearerout[bb->index]);
for (x = 0; x < NUM_EDGES (edge_list); x++)
{
an expression should be inserted on. */
struct edge_list *
-pre_edge_rev_lcm (file, n_exprs, transp, st_avloc, st_antloc, kill,
- insert, delete)
- FILE *file ATTRIBUTE_UNUSED;
- int n_exprs;
- sbitmap *transp;
- sbitmap *st_avloc;
- sbitmap *st_antloc;
- sbitmap *kill;
- sbitmap **insert;
- sbitmap **delete;
+pre_edge_rev_lcm (int n_exprs, sbitmap *transp,
+ sbitmap *st_avloc, sbitmap *st_antloc, sbitmap *kill,
+ sbitmap **insert, sbitmap **delete)
{
sbitmap *st_antin, *st_antout;
sbitmap *st_avout, *st_avin, *farthest;
edge_list = create_edge_list ();
num_edges = NUM_EDGES (edge_list);
- st_antin = (sbitmap *) sbitmap_vector_alloc (last_basic_block, n_exprs);
- st_antout = (sbitmap *) sbitmap_vector_alloc (last_basic_block, n_exprs);
+ st_antin = sbitmap_vector_alloc (last_basic_block, n_exprs);
+ st_antout = sbitmap_vector_alloc (last_basic_block, n_exprs);
sbitmap_vector_zero (st_antin, last_basic_block);
sbitmap_vector_zero (st_antout, last_basic_block);
compute_antinout_edge (st_antloc, transp, st_antin, st_antout);
compute_available (st_avloc, kill, st_avout, st_avin);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- fprintf (file, "Edge List:\n");
- verify_edge_list (file, edge_list);
- print_edge_list (file, edge_list);
- dump_sbitmap_vector (file, "transp", "", transp, last_basic_block);
- dump_sbitmap_vector (file, "st_avloc", "", st_avloc, last_basic_block);
- dump_sbitmap_vector (file, "st_antloc", "", st_antloc, last_basic_block);
- dump_sbitmap_vector (file, "st_antin", "", st_antin, last_basic_block);
- dump_sbitmap_vector (file, "st_antout", "", st_antout, last_basic_block);
- dump_sbitmap_vector (file, "st_kill", "", kill, last_basic_block);
+ fprintf (dump_file, "Edge List:\n");
+ verify_edge_list (dump_file, edge_list);
+ print_edge_list (dump_file, edge_list);
+ dump_sbitmap_vector (dump_file, "transp", "", transp, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_avloc", "", st_avloc, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_antloc", "", st_antloc, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_antin", "", st_antin, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_antout", "", st_antout, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_kill", "", kill, last_basic_block);
}
#endif
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- dump_sbitmap_vector (file, "st_avout", "", st_avout, last_basic_block);
- dump_sbitmap_vector (file, "st_avin", "", st_avin, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_avout", "", st_avout, last_basic_block);
+ dump_sbitmap_vector (dump_file, "st_avin", "", st_avin, last_basic_block);
}
#endif
kill, farthest);
#ifdef LCM_DEBUG_INFO
- if (file)
- dump_sbitmap_vector (file, "farthest", "", farthest, num_edges);
+ if (dump_file)
+ dump_sbitmap_vector (dump_file, "farthest", "", farthest, num_edges);
#endif
sbitmap_vector_free (st_antin);
compute_nearerout (edge_list, farthest, st_avloc, nearer, nearerout);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- dump_sbitmap_vector (file, "nearerout", "", nearerout,
+ dump_sbitmap_vector (dump_file, "nearerout", "", nearerout,
last_basic_block + 1);
- dump_sbitmap_vector (file, "nearer", "", nearer, num_edges);
+ dump_sbitmap_vector (dump_file, "nearer", "", nearer, num_edges);
}
#endif
sbitmap_vector_free (nearer);
#ifdef LCM_DEBUG_INFO
- if (file)
+ if (dump_file)
{
- dump_sbitmap_vector (file, "pre_insert_map", "", *insert, num_edges);
- dump_sbitmap_vector (file, "pre_delete_map", "", *delete,
+ dump_sbitmap_vector (dump_file, "pre_insert_map", "", *insert, num_edges);
+ dump_sbitmap_vector (dump_file, "pre_delete_map", "", *delete,
last_basic_block);
}
#endif
return edge_list;
}
-/* Mode switching:
-
- The algorithm for setting the modes consists of scanning the insn list
- and finding all the insns which require a specific mode. Each insn gets
- a unique struct seginfo element. These structures are inserted into a list
- for each basic block. For each entity, there is an array of bb_info over
- the flow graph basic blocks (local var 'bb_info'), and contains a list
- of all insns within that basic block, in the order they are encountered.
-
- For each entity, any basic block WITHOUT any insns requiring a specific
- mode are given a single entry, without a mode. (Each basic block
- in the flow graph must have at least one entry in the segment table.)
-
- The LCM algorithm is then run over the flow graph to determine where to
- place the sets to the highest-priority value in respect of first the first
- insn in any one block. Any adjustments required to the transparency
- vectors are made, then the next iteration starts for the next-lower
- priority mode, till for each entity all modes are exhausted.
-
- More details are located in the code for optimize_mode_switching(). */
-
-/* This structure contains the information for each insn which requires
- either single or double mode to be set.
- MODE is the mode this insn must be executed in.
- INSN_PTR is the insn to be executed (may be the note that marks the
- beginning of a basic block).
- BBNUM is the flow graph basic block this insn occurs in.
- NEXT is the next insn in the same basic block. */
-struct seginfo
-{
- int mode;
- rtx insn_ptr;
- int bbnum;
- struct seginfo *next;
- HARD_REG_SET regs_live;
-};
-
-struct bb_info
-{
- struct seginfo *seginfo;
- int computing;
-};
-
-/* These bitmaps are used for the LCM algorithm. */
-
-#ifdef OPTIMIZE_MODE_SWITCHING
-static sbitmap *antic;
-static sbitmap *transp;
-static sbitmap *comp;
-static sbitmap *delete;
-static sbitmap *insert;
-
-static struct seginfo * new_seginfo PARAMS ((int, rtx, int, HARD_REG_SET));
-static void add_seginfo PARAMS ((struct bb_info *, struct seginfo *));
-static void reg_dies PARAMS ((rtx, HARD_REG_SET));
-static void reg_becomes_live PARAMS ((rtx, rtx, void *));
-static void make_preds_opaque PARAMS ((basic_block, int));
-#endif
-\f
-#ifdef OPTIMIZE_MODE_SWITCHING
-
-/* This function will allocate a new BBINFO structure, initialized
- with the MODE, INSN, and basic block BB parameters. */
-
-static struct seginfo *
-new_seginfo (mode, insn, bb, regs_live)
- int mode;
- rtx insn;
- int bb;
- HARD_REG_SET regs_live;
-{
- struct seginfo *ptr;
- ptr = xmalloc (sizeof (struct seginfo));
- ptr->mode = mode;
- ptr->insn_ptr = insn;
- ptr->bbnum = bb;
- ptr->next = NULL;
- COPY_HARD_REG_SET (ptr->regs_live, regs_live);
- return ptr;
-}
-
-/* Add a seginfo element to the end of a list.
- HEAD is a pointer to the list beginning.
- INFO is the structure to be linked in. */
-
-static void
-add_seginfo (head, info)
- struct bb_info *head;
- struct seginfo *info;
-{
- struct seginfo *ptr;
-
- if (head->seginfo == NULL)
- head->seginfo = info;
- else
- {
- ptr = head->seginfo;
- while (ptr->next != NULL)
- ptr = ptr->next;
- ptr->next = info;
- }
-}
-
-/* Make all predecessors of basic block B opaque, recursively, till we hit
- some that are already non-transparent, or an edge where aux is set; that
- denotes that a mode set is to be done on that edge.
- J is the bit number in the bitmaps that corresponds to the entity that
- we are currently handling mode-switching for. */
-
-static void
-make_preds_opaque (b, j)
- basic_block b;
- int j;
-{
- edge e;
-
- for (e = b->pred; e; e = e->pred_next)
- {
- basic_block pb = e->src;
-
- if (e->aux || ! TEST_BIT (transp[pb->index], j))
- continue;
-
- RESET_BIT (transp[pb->index], j);
- make_preds_opaque (pb, j);
- }
-}
-
-/* Record in LIVE that register REG died. */
-
-static void
-reg_dies (reg, live)
- rtx reg;
- HARD_REG_SET live;
-{
- int regno, nregs;
-
- if (GET_CODE (reg) != REG)
- return;
-
- regno = REGNO (reg);
- if (regno < FIRST_PSEUDO_REGISTER)
- for (nregs = HARD_REGNO_NREGS (regno, GET_MODE (reg)) - 1; nregs >= 0;
- nregs--)
- CLEAR_HARD_REG_BIT (live, regno + nregs);
-}
-
-/* Record in LIVE that register REG became live.
- This is called via note_stores. */
-
-static void
-reg_becomes_live (reg, setter, live)
- rtx reg;
- rtx setter ATTRIBUTE_UNUSED;
- void *live;
-{
- int regno, nregs;
-
- if (GET_CODE (reg) == SUBREG)
- reg = SUBREG_REG (reg);
-
- if (GET_CODE (reg) != REG)
- return;
-
- regno = REGNO (reg);
- if (regno < FIRST_PSEUDO_REGISTER)
- for (nregs = HARD_REGNO_NREGS (regno, GET_MODE (reg)) - 1; nregs >= 0;
- nregs--)
- SET_HARD_REG_BIT (* (HARD_REG_SET *) live, regno + nregs);
-}
-
-/* Find all insns that need a particular mode setting, and insert the
- necessary mode switches. Return true if we did work. */
-
-int
-optimize_mode_switching (file)
- FILE *file;
-{
- rtx insn;
- int e;
- basic_block bb;
- int need_commit = 0;
- sbitmap *kill;
- struct edge_list *edge_list;
- static const int num_modes[] = NUM_MODES_FOR_MODE_SWITCHING;
-#define N_ENTITIES ARRAY_SIZE (num_modes)
- int entity_map[N_ENTITIES];
- struct bb_info *bb_info[N_ENTITIES];
- int i, j;
- int n_entities;
- int max_num_modes = 0;
- bool emited = false;
- basic_block post_entry ATTRIBUTE_UNUSED, pre_exit ATTRIBUTE_UNUSED;
-
- clear_bb_flags ();
-
- for (e = N_ENTITIES - 1, n_entities = 0; e >= 0; e--)
- if (OPTIMIZE_MODE_SWITCHING (e))
- {
- int entry_exit_extra = 0;
-
- /* Create the list of segments within each basic block.
- If NORMAL_MODE is defined, allow for two extra
- blocks split from the entry and exit block. */
-#ifdef NORMAL_MODE
- entry_exit_extra = 2;
-#endif
- bb_info[n_entities]
- = (struct bb_info *) xcalloc (last_basic_block + entry_exit_extra,
- sizeof **bb_info);
- entity_map[n_entities++] = e;
- if (num_modes[e] > max_num_modes)
- max_num_modes = num_modes[e];
- }
-
- if (! n_entities)
- return 0;
-
-#ifdef NORMAL_MODE
- {
- /* Split the edge from the entry block and the fallthrough edge to the
- exit block, so that we can note that there NORMAL_MODE is supplied /
- required. */
- edge eg;
- post_entry = split_edge (ENTRY_BLOCK_PTR->succ);
- /* The only non-call predecessor at this stage is a block with a
- fallthrough edge; there can be at most one, but there could be
- none at all, e.g. when exit is called. */
- for (pre_exit = 0, eg = EXIT_BLOCK_PTR->pred; eg; eg = eg->pred_next)
- if (eg->flags & EDGE_FALLTHRU)
- {
- regset live_at_end = eg->src->global_live_at_end;
-
- if (pre_exit)
- abort ();
- pre_exit = split_edge (eg);
- COPY_REG_SET (pre_exit->global_live_at_start, live_at_end);
- COPY_REG_SET (pre_exit->global_live_at_end, live_at_end);
- }
- }
-#endif
-
- /* Create the bitmap vectors. */
-
- antic = sbitmap_vector_alloc (last_basic_block, n_entities);
- transp = sbitmap_vector_alloc (last_basic_block, n_entities);
- comp = sbitmap_vector_alloc (last_basic_block, n_entities);
-
- sbitmap_vector_ones (transp, last_basic_block);
-
- for (j = n_entities - 1; j >= 0; j--)
- {
- int e = entity_map[j];
- int no_mode = num_modes[e];
- struct bb_info *info = bb_info[j];
-
- /* Determine what the first use (if any) need for a mode of entity E is.
- This will be the mode that is anticipatable for this block.
- Also compute the initial transparency settings. */
- FOR_EACH_BB (bb)
- {
- struct seginfo *ptr;
- int last_mode = no_mode;
- HARD_REG_SET live_now;
-
- REG_SET_TO_HARD_REG_SET (live_now,
- bb->global_live_at_start);
- for (insn = bb->head;
- insn != NULL && insn != NEXT_INSN (bb->end);
- insn = NEXT_INSN (insn))
- {
- if (INSN_P (insn))
- {
- int mode = MODE_NEEDED (e, insn);
- rtx link;
-
- if (mode != no_mode && mode != last_mode)
- {
- last_mode = mode;
- ptr = new_seginfo (mode, insn, bb->index, live_now);
- add_seginfo (info + bb->index, ptr);
- RESET_BIT (transp[bb->index], j);
- }
-
- /* Update LIVE_NOW. */
- for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
- if (REG_NOTE_KIND (link) == REG_DEAD)
- reg_dies (XEXP (link, 0), live_now);
-
- note_stores (PATTERN (insn), reg_becomes_live, &live_now);
- for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
- if (REG_NOTE_KIND (link) == REG_UNUSED)
- reg_dies (XEXP (link, 0), live_now);
- }
- }
-
- info[bb->index].computing = last_mode;
- /* Check for blocks without ANY mode requirements. */
- if (last_mode == no_mode)
- {
- ptr = new_seginfo (no_mode, bb->end, bb->index, live_now);
- add_seginfo (info + bb->index, ptr);
- }
- }
-#ifdef NORMAL_MODE
- {
- int mode = NORMAL_MODE (e);
-
- if (mode != no_mode)
- {
- bb = post_entry;
-
- /* By always making this nontransparent, we save
- an extra check in make_preds_opaque. We also
- need this to avoid confusing pre_edge_lcm when
- antic is cleared but transp and comp are set. */
- RESET_BIT (transp[bb->index], j);
-
- /* Insert a fake computing definition of MODE into entry
- blocks which compute no mode. This represents the mode on
- entry. */
- info[bb->index].computing = mode;
-
- if (pre_exit)
- info[pre_exit->index].seginfo->mode = mode;
- }
- }
-#endif /* NORMAL_MODE */
- }
-
- kill = sbitmap_vector_alloc (last_basic_block, n_entities);
- for (i = 0; i < max_num_modes; i++)
- {
- int current_mode[N_ENTITIES];
-
- /* Set the anticipatable and computing arrays. */
- sbitmap_vector_zero (antic, last_basic_block);
- sbitmap_vector_zero (comp, last_basic_block);
- for (j = n_entities - 1; j >= 0; j--)
- {
- int m = current_mode[j] = MODE_PRIORITY_TO_MODE (entity_map[j], i);
- struct bb_info *info = bb_info[j];
-
- FOR_EACH_BB (bb)
- {
- if (info[bb->index].seginfo->mode == m)
- SET_BIT (antic[bb->index], j);
-
- if (info[bb->index].computing == m)
- SET_BIT (comp[bb->index], j);
- }
- }
-
- /* Calculate the optimal locations for the
- placement mode switches to modes with priority I. */
-
- FOR_EACH_BB (bb)
- sbitmap_not (kill[bb->index], transp[bb->index]);
- edge_list = pre_edge_lcm (file, 1, transp, comp, antic,
- kill, &insert, &delete);
-
- for (j = n_entities - 1; j >= 0; j--)
- {
- /* Insert all mode sets that have been inserted by lcm. */
- int no_mode = num_modes[entity_map[j]];
-
- /* Wherever we have moved a mode setting upwards in the flow graph,
- the blocks between the new setting site and the now redundant
- computation ceases to be transparent for any lower-priority
- mode of the same entity. First set the aux field of each
- insertion site edge non-transparent, then propagate the new
- non-transparency from the redundant computation upwards till
- we hit an insertion site or an already non-transparent block. */
- for (e = NUM_EDGES (edge_list) - 1; e >= 0; e--)
- {
- edge eg = INDEX_EDGE (edge_list, e);
- int mode;
- basic_block src_bb;
- HARD_REG_SET live_at_edge;
- rtx mode_set;
-
- eg->aux = 0;
-
- if (! TEST_BIT (insert[e], j))
- continue;
-
- eg->aux = (void *)1;
-
- mode = current_mode[j];
- src_bb = eg->src;
-
- REG_SET_TO_HARD_REG_SET (live_at_edge,
- src_bb->global_live_at_end);
-
- start_sequence ();
- EMIT_MODE_SET (entity_map[j], mode, live_at_edge);
- mode_set = get_insns ();
- end_sequence ();
-
- /* Do not bother to insert empty sequence. */
- if (mode_set == NULL_RTX)
- continue;
-
- /* If this is an abnormal edge, we'll insert at the end
- of the previous block. */
- if (eg->flags & EDGE_ABNORMAL)
- {
- emited = true;
- if (GET_CODE (src_bb->end) == JUMP_INSN)
- emit_insn_before (mode_set, src_bb->end);
- /* It doesn't make sense to switch to normal mode
- after a CALL_INSN, so we're going to abort if we
- find one. The cases in which a CALL_INSN may
- have an abnormal edge are sibcalls and EH edges.
- In the case of sibcalls, the dest basic-block is
- the EXIT_BLOCK, that runs in normal mode; it is
- assumed that a sibcall insn requires normal mode
- itself, so no mode switch would be required after
- the call (it wouldn't make sense, anyway). In
- the case of EH edges, EH entry points also start
- in normal mode, so a similar reasoning applies. */
- else if (GET_CODE (src_bb->end) == INSN)
- emit_insn_after (mode_set, src_bb->end);
- else
- abort ();
- bb_info[j][src_bb->index].computing = mode;
- RESET_BIT (transp[src_bb->index], j);
- }
- else
- {
- need_commit = 1;
- insert_insn_on_edge (mode_set, eg);
- }
- }
-
- FOR_EACH_BB_REVERSE (bb)
- if (TEST_BIT (delete[bb->index], j))
- {
- make_preds_opaque (bb, j);
- /* Cancel the 'deleted' mode set. */
- bb_info[j][bb->index].seginfo->mode = no_mode;
- }
- }
-
- clear_aux_for_edges ();
- free_edge_list (edge_list);
- }
-
- /* Now output the remaining mode sets in all the segments. */
- for (j = n_entities - 1; j >= 0; j--)
- {
- int no_mode = num_modes[entity_map[j]];
-
- FOR_EACH_BB_REVERSE (bb)
- {
- struct seginfo *ptr, *next;
- for (ptr = bb_info[j][bb->index].seginfo; ptr; ptr = next)
- {
- next = ptr->next;
- if (ptr->mode != no_mode)
- {
- rtx mode_set;
-
- start_sequence ();
- EMIT_MODE_SET (entity_map[j], ptr->mode, ptr->regs_live);
- mode_set = get_insns ();
- end_sequence ();
-
- /* Do not bother to insert empty sequence. */
- if (mode_set == NULL_RTX)
- continue;
-
- emited = true;
- if (GET_CODE (ptr->insn_ptr) == NOTE
- && (NOTE_LINE_NUMBER (ptr->insn_ptr)
- == NOTE_INSN_BASIC_BLOCK))
- emit_insn_after (mode_set, ptr->insn_ptr);
- else
- emit_insn_before (mode_set, ptr->insn_ptr);
- }
-
- free (ptr);
- }
- }
-
- free (bb_info[j]);
- }
-
- /* Finished. Free up all the things we've allocated. */
-
- sbitmap_vector_free (kill);
- sbitmap_vector_free (antic);
- sbitmap_vector_free (transp);
- sbitmap_vector_free (comp);
- sbitmap_vector_free (delete);
- sbitmap_vector_free (insert);
-
- if (need_commit)
- commit_edge_insertions ();
-
-#ifdef NORMAL_MODE
- cleanup_cfg (CLEANUP_NO_INSN_DEL);
-#else
- if (!need_commit && !emited)
- return 0;
-#endif
-
- max_regno = max_reg_num ();
- allocate_reg_info (max_regno, FALSE, FALSE);
- update_life_info_in_dirty_blocks (UPDATE_LIFE_GLOBAL_RM_NOTES,
- (PROP_DEATH_NOTES | PROP_KILL_DEAD_CODE
- | PROP_SCAN_DEAD_CODE));
-
- return 1;
-}
-#endif /* OPTIMIZE_MODE_SWITCHING */