/* Compiler driver program that can handle many languages.
Copyright (C) 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC.
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include <signal.h>
#if ! defined( SIGCHLD ) && defined( SIGCLD )
# define SIGCHLD SIGCLD
#include <sys/resource.h>
#endif
#if defined (HAVE_DECL_GETRUSAGE) && !HAVE_DECL_GETRUSAGE
-extern int getrusage PARAMS ((int, struct rusage *));
+extern int getrusage (int, struct rusage *);
#endif
/* By default there is no special suffix for target executables. */
#define TARGET_OBJECT_SUFFIX ".o"
#endif
-#ifndef VMS
-/* FIXME: the location independence code for VMS is hairier than this,
- and hasn't been written. */
-#ifndef DIR_UP
-#define DIR_UP ".."
-#endif /* DIR_UP */
-#endif /* VMS */
-
static const char dir_separator_str[] = { DIR_SEPARATOR, 0 };
/* Most every one is fine with LIBRARY_PATH. For some, it conflicts. */
static int report_times;
+/* Nonzero means place this string before uses of /, so that include
+ and library files can be found in an alternate location. */
+
+#ifdef TARGET_SYSTEM_ROOT
+static const char *target_system_root = TARGET_SYSTEM_ROOT;
+#else
+static const char *target_system_root = 0;
+#endif
+
+/* Nonzero means pass the updated target_system_root to the compiler. */
+
+static int target_system_root_changed;
+
+/* Nonzero means append this string to target_system_root. */
+
+static const char *target_sysroot_suffix = 0;
+
+/* Nonzero means append this string to target_system_root for headers. */
+
+static const char *target_sysroot_hdrs_suffix = 0;
+
/* Nonzero means write "temp" files in source directory
and use the source file's name in them, and don't delete them. */
static int save_temps_flag;
+/* Nonzero means use pipes to communicate between subprocesses.
+ Overridden by either of the above two flags. */
+
+static int use_pipes;
+
/* The compiler version. */
static const char *compiler_version;
/* Forward declaration for prototypes. */
struct path_prefix;
-static void init_spec PARAMS ((void));
-#ifndef VMS
-static char **split_directories PARAMS ((const char *, int *));
-static void free_split_directories PARAMS ((char **));
-static char *make_relative_prefix PARAMS ((const char *, const char *, const char *));
-#endif /* VMS */
-static void store_arg PARAMS ((const char *, int, int));
-static char *load_specs PARAMS ((const char *));
-static void read_specs PARAMS ((const char *, int));
-static void set_spec PARAMS ((const char *, const char *));
-static struct compiler *lookup_compiler PARAMS ((const char *, size_t, const char *));
-static char *build_search_list PARAMS ((struct path_prefix *, const char *, int));
-static void putenv_from_prefixes PARAMS ((struct path_prefix *, const char *));
-static int access_check PARAMS ((const char *, int));
-static char *find_a_file PARAMS ((struct path_prefix *, const char *,
- int, int));
-static void add_prefix PARAMS ((struct path_prefix *, const char *,
- const char *, int, int, int *, int));
-static void translate_options PARAMS ((int *, const char *const **));
-static char *skip_whitespace PARAMS ((char *));
-static void delete_if_ordinary PARAMS ((const char *));
-static void delete_temp_files PARAMS ((void));
-static void delete_failure_queue PARAMS ((void));
-static void clear_failure_queue PARAMS ((void));
-static int check_live_switch PARAMS ((int, int));
-static const char *handle_braces PARAMS ((const char *));
-static char *save_string PARAMS ((const char *, int));
-static void set_collect_gcc_options PARAMS ((void));
-static int do_spec_1 PARAMS ((const char *, int, const char *));
-static int do_spec_2 PARAMS ((const char *));
-static const char *find_file PARAMS ((const char *));
-static int is_directory PARAMS ((const char *, const char *, int));
-static void validate_switches PARAMS ((const char *));
-static void validate_all_switches PARAMS ((void));
-static void give_switch PARAMS ((int, int, int));
-static int used_arg PARAMS ((const char *, int));
-static int default_arg PARAMS ((const char *, int));
-static void set_multilib_dir PARAMS ((void));
-static void print_multilib_info PARAMS ((void));
-static void perror_with_name PARAMS ((const char *));
-static void pfatal_pexecute PARAMS ((const char *, const char *))
- ATTRIBUTE_NORETURN;
-static void notice PARAMS ((const char *, ...))
- ATTRIBUTE_PRINTF_1;
-static void display_help PARAMS ((void));
-static void add_preprocessor_option PARAMS ((const char *, int));
-static void add_assembler_option PARAMS ((const char *, int));
-static void add_linker_option PARAMS ((const char *, int));
-static void process_command PARAMS ((int, const char *const *));
-static int execute PARAMS ((void));
-static void clear_args PARAMS ((void));
-static void fatal_error PARAMS ((int));
+static void init_spec (void);
+static void store_arg (const char *, int, int);
+static char *load_specs (const char *);
+static void read_specs (const char *, int);
+static void set_spec (const char *, const char *);
+static struct compiler *lookup_compiler (const char *, size_t, const char *);
+static char *build_search_list (struct path_prefix *, const char *, int);
+static void putenv_from_prefixes (struct path_prefix *, const char *);
+static int access_check (const char *, int);
+static char *find_a_file (struct path_prefix *, const char *, int, int);
+static void add_prefix (struct path_prefix *, const char *, const char *,
+ int, int, int *, int);
+static void add_sysrooted_prefix (struct path_prefix *, const char *,
+ const char *, int, int, int *, int);
+static void translate_options (int *, const char *const **);
+static char *skip_whitespace (char *);
+static void delete_if_ordinary (const char *);
+static void delete_temp_files (void);
+static void delete_failure_queue (void);
+static void clear_failure_queue (void);
+static int check_live_switch (int, int);
+static const char *handle_braces (const char *);
+static inline bool input_suffix_matches (const char *, const char *);
+static inline bool switch_matches (const char *, const char *, int);
+static inline void mark_matching_switches (const char *, const char *, int);
+static inline void process_marked_switches (void);
+static const char *process_brace_body (const char *, const char *, const char *, int, int);
+static const struct spec_function *lookup_spec_function (const char *);
+static const char *eval_spec_function (const char *, const char *);
+static const char *handle_spec_function (const char *);
+static char *save_string (const char *, int);
+static void set_collect_gcc_options (void);
+static int do_spec_1 (const char *, int, const char *);
+static int do_spec_2 (const char *);
+static void do_option_spec (const char *, const char *);
+static void do_self_spec (const char *);
+static const char *find_file (const char *);
+static int is_directory (const char *, const char *, int);
+static const char *validate_switches (const char *);
+static void validate_all_switches (void);
+static inline void validate_switches_from_spec (const char *);
+static void give_switch (int, int);
+static int used_arg (const char *, int);
+static int default_arg (const char *, int);
+static void set_multilib_dir (void);
+static void print_multilib_info (void);
+static void perror_with_name (const char *);
+static void pfatal_pexecute (const char *, const char *) ATTRIBUTE_NORETURN;
+static void notice (const char *, ...) ATTRIBUTE_PRINTF_1;
+static void display_help (void);
+static void add_preprocessor_option (const char *, int);
+static void add_assembler_option (const char *, int);
+static void add_linker_option (const char *, int);
+static void process_command (int, const char *const *);
+static int execute (void);
+static void alloc_args (void);
+static void clear_args (void);
+static void fatal_error (int);
#ifdef ENABLE_SHARED_LIBGCC
-static void init_gcc_specs PARAMS ((struct obstack *,
- const char *, const char *,
- const char *));
+static void init_gcc_specs (struct obstack *, const char *, const char *,
+ const char *);
#endif
#if defined(HAVE_TARGET_OBJECT_SUFFIX) || defined(HAVE_TARGET_EXECUTABLE_SUFFIX)
-static const char *convert_filename PARAMS ((const char *, int, int));
+static const char *convert_filename (const char *, int, int);
#endif
+
+static const char *if_exists_spec_function (int, const char **);
+static const char *if_exists_else_spec_function (int, const char **);
\f
/* The Specs Language
with a file name chosen once per compilation, without regard
to any appended suffix (which was therefore treated just like
ordinary text), making such attacks more likely to succeed.
+ %|SUFFIX
+ like %g, but if -pipe is in effect, expands simply to "-".
+ %mSUFFIX
+ like %g, but if -pipe is in effect, expands to nothing. (We have both
+ %| and %m to accommodate differences between system assemblers; see
+ the AS_NEEDS_DASH_FOR_PIPED_INPUT target macro.)
%uSUFFIX
like %g, but generates a new temporary file name even if %uSUFFIX
was already seen.
%w marks the argument containing or following the %w as the
"output file" of this compilation. This puts the argument
into the sequence of arguments that %o will substitute later.
+ %V indicates that this compilation produces no "output file".
%W{...}
like %{...} but mark last argument supplied within
as a file to be deleted on failure.
except that %g, %u, and %U do not currently support additional
SUFFIX characters following %O as they would following, for
example, `.o'.
- %p substitutes the standard macro predefinitions for the
- current target machine. Use this when running cpp.
- %P like %p, but puts `__' before and after the name of each macro.
- (Except macros that already have __.)
- This is for ANSI C.
- %I Substitute a -iprefix option made from GCC_EXEC_PREFIX.
+ %I Substitute any of -iprefix (made from GCC_EXEC_PREFIX), -isysroot
+ (made from TARGET_SYSTEM_ROOT), and -isystem (made from COMPILER_PATH
+ and -B options) as necessary.
%s current argument is the name of a library or startup file of some sort.
Search for that file in a standard list of directories
and substitute the full name found.
%eSTR Print STR as an error message. STR is terminated by a newline.
Use this when inconsistent options are detected.
- %nSTR Print STR as an notice. STR is terminated by a newline.
+ %nSTR Print STR as a notice. STR is terminated by a newline.
%x{OPTION} Accumulate an option for %X.
%X Output the accumulated linker options specified by compilations.
%Y Output the accumulated assembler options specified by compilations.
%Z Output the accumulated preprocessor options specified by compilations.
- %v1 Substitute the major version number of GCC.
- (For version 2.5.3, this is 2.)
- %v2 Substitute the minor version number of GCC.
- (For version 2.5.3, this is 5.)
- %v3 Substitute the patch level number of GCC.
- (For version 2.5.3, this is 3.)
%a process ASM_SPEC as a spec.
This allows config.h to specify part of the spec for running as.
%A process ASM_FINAL_SPEC as a spec. A capital A is actually
%C process CPP_SPEC as a spec.
%1 process CC1_SPEC as a spec.
%2 process CC1PLUS_SPEC as a spec.
- %| output "-" if the input for the current command is coming from a pipe.
%* substitute the variable part of a matched option. (See below.)
Note that each comma in the substituted string is replaced by
a single space.
+ %<S remove all occurrences of -S from the command line.
+ Note - this command is position dependent. % commands in the
+ spec string before this one will see -S, % commands in the
+ spec string after this one will not.
+ %<S* remove all occurrences of all switches beginning with -S from the
+ command line.
+ %:function(args)
+ Call the named function FUNCTION, passing it ARGS. ARGS is
+ first processed as a nested spec string, then split into an
+ argument vector in the usual fashion. The function returns
+ a string which is processed as if it had appeared literally
+ as part of the current spec.
%{S} substitutes the -S switch, if that switch was given to CC.
If that switch was not specified, this substitutes nothing.
Here S is a metasyntactic variable.
arguments. CC considers `-o foo' as being one switch whose
name starts with `o'. %{o*} would substitute this text,
including the space; thus, two arguments would be generated.
- %{^S*} likewise, but don't put a blank between a switch and any args.
%{S*&T*} likewise, but preserve order of S and T options (the order
- of S and T in the spec is not significant). Can be any number
- of ampersand-separated variables; for each the wild card is
- optional. Useful for CPP as %{D*&U*&A*}.
- %{S*:X} substitutes X if one or more switches whose names start with -S are
- specified to CC. Note that the tail part of the -S option
- (i.e. the part matched by the `*') will be substituted for each
- occurrence of %* within X.
- %{<S} remove all occurrences of -S from the command line.
- Note - this option is position dependent. % commands in the
- spec string before this option will see -S, % commands in the
- spec string after this option will not.
- %{S:X} substitutes X, but only if the -S switch was given to CC.
- %{!S:X} substitutes X, but only if the -S switch was NOT given to CC.
- %{|S:X} like %{S:X}, but if no S switch, substitute `-'.
- %{|!S:X} like %{!S:X}, but if there is an S switch, substitute `-'.
- %{.S:X} substitutes X, but only if processing a file with suffix S.
- %{!.S:X} substitutes X, but only if NOT processing a file with suffix S.
- %{S|P:X} substitutes X if either -S or -P was given to CC. This may be
- combined with ! and . as above binding stronger than the OR.
+ of S and T in the spec is not significant). Can be any number
+ of ampersand-separated variables; for each the wild card is
+ optional. Useful for CPP as %{D*&U*&A*}.
+
+ %{S:X} substitutes X, if the -S switch was given to CC.
+ %{!S:X} substitutes X, if the -S switch was NOT given to CC.
+ %{S*:X} substitutes X if one or more switches whose names start
+ with -S was given to CC. Normally X is substituted only
+ once, no matter how many such switches appeared. However,
+ if %* appears somewhere in X, then X will be substituted
+ once for each matching switch, with the %* replaced by the
+ part of that switch that matched the '*'.
+ %{.S:X} substitutes X, if processing a file with suffix S.
+ %{!.S:X} substitutes X, if NOT processing a file with suffix S.
+
+ %{S|T:X} substitutes X if either -S or -T was given to CC. This may be
+ combined with !, ., and * as above binding stronger than the OR.
+ If %* appears in X, all of the alternatives must be starred, and
+ only the first matching alternative is substituted.
+ %{S:X; if S was given to CC, substitutes X;
+ T:Y; else if T was given to CC, substitutes Y;
+ :D} else substitutes D. There can be as many clauses as you need.
+ This may be combined with ., !, |, and * as above.
+
%(Spec) processes a specification defined in a specs file as *Spec:
%[Spec] as above, but put __ around -D arguments
-The conditional text X in a %{S:X} or %{!S:X} construct may contain
+The conditional text X in a %{S:X} or similar construct may contain
other nested % constructs or spaces, or even newlines. They are
-processed as usual, as described above.
+processed as usual, as described above. Trailing white space in X is
+ignored. White space may also appear anywhere on the left side of the
+colon in these constructs, except between . or * and the corresponding
+word.
The -O, -f, -m, and -W switches are handled specifically in these
constructs. If another value of -O or the negated form of a -f, -m, or
#define LINK_GCC_C_SEQUENCE_SPEC "%G %L %G"
#endif
+#ifndef LINK_PIE_SPEC
+#ifdef HAVE_LD_PIE
+#define LINK_PIE_SPEC "%{pie:-pie} "
+#else
+#define LINK_PIE_SPEC "%{pie:} "
+#endif
+#endif
+
/* -u* was put back because both BSD and SysV seem to support it. */
/* %{static:} simply prevents an error message if the target machine
doesn't handle -static. */
#ifndef LINK_COMMAND_SPEC
#define LINK_COMMAND_SPEC "\
%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S:\
- %(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r} %{s} %{t}\
- %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
- %{static:} %{L*} %(link_libgcc) %o %{!nostdlib:%{!nodefaultlibs:%(link_gcc_c_sequence)}}\
+ %(linker) %l " LINK_PIE_SPEC "%X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r}\
+ %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
+ %{static:} %{L*} %(link_libgcc) %o %{fprofile-arcs:-lgcov}\
+ %{!nostdlib:%{!nodefaultlibs:%(link_gcc_c_sequence)}}\
%{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}"
#endif
# define STARTFILE_PREFIX_SPEC ""
#endif
+#ifndef SYSROOT_SUFFIX_SPEC
+# define SYSROOT_SUFFIX_SPEC ""
+#endif
+
+#ifndef SYSROOT_HEADERS_SUFFIX_SPEC
+# define SYSROOT_HEADERS_SUFFIX_SPEC ""
+#endif
+
static const char *asm_debug;
static const char *cpp_spec = CPP_SPEC;
-static const char *cpp_predefines = CPP_PREDEFINES;
static const char *cc1_spec = CC1_SPEC;
static const char *cc1plus_spec = CC1PLUS_SPEC;
static const char *link_gcc_c_sequence_spec = LINK_GCC_C_SEQUENCE_SPEC;
static const char *link_command_spec = LINK_COMMAND_SPEC;
static const char *link_libgcc_spec = LINK_LIBGCC_SPEC;
static const char *startfile_prefix_spec = STARTFILE_PREFIX_SPEC;
+static const char *sysroot_suffix_spec = SYSROOT_SUFFIX_SPEC;
+static const char *sysroot_hdrs_suffix_spec = SYSROOT_HEADERS_SUFFIX_SPEC;
/* Standard options to cpp, cc1, and as, to reduce duplication in specs.
There should be no need to override these in target dependent files,
therefore no dependency entry, confuses make into thinking a .o
file that happens to exist is up-to-date. */
static const char *cpp_unique_options =
-"%{C:%{!E:%eGNU C does not support -C without using -E}}\
- %{CC:%{!E:%eGNU C does not support -CC without using -E}}\
+"%{C|CC:%{!E:%eGCC does not support -C or -CC without -E}}\
%{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*} %{P} %I\
%{MD:-MD %{!o:%b.d}%{o*:%.d%*}}\
%{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}}\
%{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*}\
%{!E:%{!M:%{!MM:%{MD|MMD:%{o*:-MQ %*}}}}}\
- %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
- %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
- %{remap} %{g3:-dD} %{H} %C %{D*&U*&A*} %{i*} %Z %i\
+ %{trigraphs} %{remap} %{g3:-dD} %{H} %C %{D*&U*&A*} %{i*} %Z %i\
%{E|M|MM:%W{o*}}";
/* This contains cpp options which are common with cc1_options and are passed
in turn cause preprocessor symbols to be defined specially. */
static const char *cpp_options =
"%(cpp_unique_options) %1 %{m*} %{std*} %{ansi} %{W*&pedantic*} %{w} %{f*}\
- %{O*} %{undef}";
+ %{g*:%{!g0:%{!fno-working-directory:-fworking-directory}}} %{O*} %{undef}";
/* This contains cpp options which are not passed when the preprocessor
output will be used by another program. */
"%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}";
static const char *invoke_as =
-"%{!S:-o %{|!pipe:%g.s} |\n as %(asm_options) %{!pipe:%g.s} %A }";
+#ifdef AS_NEEDS_DASH_FOR_PIPED_INPUT
+"%{!S:-o %|.s |\n as %(asm_options) %|.s %A }";
+#else
+"%{!S:-o %|.s |\n as %(asm_options) %m.s %A }";
+#endif
/* Some compilers have limits on line lengths, and the multilib_select
and/or multilib_matches strings can be very long, so we build them at
static const char *const multilib_defaults_raw[] = MULTILIB_DEFAULTS;
+#ifndef DRIVER_SELF_SPECS
+#define DRIVER_SELF_SPECS ""
+#endif
+
+static const char *const driver_self_specs[] = { DRIVER_SELF_SPECS };
+
+#ifndef OPTION_DEFAULT_SPECS
+#define OPTION_DEFAULT_SPECS { "", "" }
+#endif
+
+struct default_spec
+{
+ const char *name;
+ const char *spec;
+};
+
+static const struct default_spec
+ option_default_specs[] = { OPTION_DEFAULT_SPECS };
+
struct user_specs
{
struct user_specs *next;
static struct user_specs *user_specs_head, *user_specs_tail;
-/* This defines which switch letters take arguments. */
-
-#define DEFAULT_SWITCH_TAKES_ARG(CHAR) \
- ((CHAR) == 'D' || (CHAR) == 'U' || (CHAR) == 'o' \
- || (CHAR) == 'e' || (CHAR) == 'T' || (CHAR) == 'u' \
- || (CHAR) == 'I' || (CHAR) == 'm' || (CHAR) == 'x' \
- || (CHAR) == 'L' || (CHAR) == 'A' || (CHAR) == 'B' || (CHAR) == 'b')
-
#ifndef SWITCH_TAKES_ARG
#define SWITCH_TAKES_ARG(CHAR) DEFAULT_SWITCH_TAKES_ARG(CHAR)
#endif
-/* This defines which multi-letter switches take arguments. */
-
-#define DEFAULT_WORD_SWITCH_TAKES_ARG(STR) \
- (!strcmp (STR, "Tdata") || !strcmp (STR, "Ttext") \
- || !strcmp (STR, "Tbss") || !strcmp (STR, "include") \
- || !strcmp (STR, "imacros") || !strcmp (STR, "aux-info") \
- || !strcmp (STR, "idirafter") || !strcmp (STR, "iprefix") \
- || !strcmp (STR, "iwithprefix") || !strcmp (STR, "iwithprefixbefore") \
- || !strcmp (STR, "isystem") || !strcmp (STR, "-param") \
- || !strcmp (STR, "specs") \
- || !strcmp (STR, "MF") || !strcmp (STR, "MT") || !strcmp (STR, "MQ"))
-
#ifndef WORD_SWITCH_TAKES_ARG
#define WORD_SWITCH_TAKES_ARG(STR) DEFAULT_WORD_SWITCH_TAKES_ARG (STR)
#endif
{".m", "#Objective-C", 0}, {".mi", "#Objective-C", 0},
{".cc", "#C++", 0}, {".cxx", "#C++", 0}, {".cpp", "#C++", 0},
{".cp", "#C++", 0}, {".c++", "#C++", 0}, {".C", "#C++", 0},
- {".ii", "#C++", 0},
+ {".CPP", "#C++", 0}, {".ii", "#C++", 0},
{".ads", "#Ada", 0}, {".adb", "#Ada", 0},
{".f", "#Fortran", 0}, {".for", "#Fortran", 0}, {".fpp", "#Fortran", 0},
{".F", "#Fortran", 0}, {".FOR", "#Fortran", 0}, {".FPP", "#Fortran", 0},
%{!E:%{!M:%{!MM:\
%{traditional|ftraditional:\
%eGNU C no longer supports -traditional without -E}\
- %{save-temps|traditional-cpp:%(trad_capable_cpp) \
- %(cpp_options) %b.i \n\
- cc1 -fpreprocessed %b.i %(cc1_options)}\
- %{!save-temps:%{!traditional-cpp:\
- cc1 %(cpp_unique_options) %(cc1_options)}}\
+ %{save-temps|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
+ %(cpp_options) -o %{save-temps:%b.i} %{!save-temps:%g.i} \n\
+ cc1 -fpreprocessed %{save-temps:%b.i} %{!save-temps:%g.i} \
+ %(cc1_options)}\
+ %{!save-temps:%{!traditional-cpp:%{!no-integrated-cpp:\
+ cc1 %(cpp_unique_options) %(cc1_options)}}}\
%{!fsyntax-only:%(invoke_as)}}}}", 0},
{"-",
"%{!E:%e-E required when input is from standard input}\
%(trad_capable_cpp) %(cpp_options) %(cpp_debug_options)", 0},
{".h", "@c-header", 0},
{"@c-header",
- "%{!E:%ecompilation of header file requested} \
- %(trad_capable_cpp) %(cpp_options) %(cpp_debug_options)",
- 0},
+ /* cc1 has an integrated ISO C preprocessor. We should invoke the
+ external preprocessor if -save-temps is given. */
+ "%{E|M|MM:%(trad_capable_cpp) %(cpp_options) %(cpp_debug_options)}\
+ %{!E:%{!M:%{!MM:\
+ %{save-temps|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
+ %(cpp_options) -o %{save-temps:%b.i} %{!save-temps:%g.i} \n\
+ cc1 -fpreprocessed %{save-temps:%b.i} %{!save-temps:%g.i} \
+ %(cc1_options)\
+ -o %g.s %{!o*:--output-pch=%i.gch}\
+ %W{o*:--output-pch=%*}%V}\
+ %{!save-temps:%{!traditional-cpp:%{!no-integrated-cpp:\
+ cc1 %(cpp_unique_options) %(cc1_options)\
+ -o %g.s %{!o*:--output-pch=%i.gch}\
+ %W{o*:--output-pch=%*}%V}}}}}}", 0},
{".i", "@cpp-output", 0},
{"@cpp-output",
"%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}", 0},
"%{!M:%{!MM:%{!E:%{!S:as %(asm_debug) %(asm_options) %i %A }}}}", 0},
{".S", "@assembler-with-cpp", 0},
{"@assembler-with-cpp",
+#ifdef AS_NEEDS_DASH_FOR_PIPED_INPUT
+ "%(trad_capable_cpp) -lang-asm %(cpp_options)\
+ %{E|M|MM:%(cpp_debug_options)}\
+ %{!M:%{!MM:%{!E:%{!S:-o %|.s |\n\
+ as %(asm_debug) %(asm_options) %|.s %A }}}}"
+#else
"%(trad_capable_cpp) -lang-asm %(cpp_options)\
%{E|M|MM:%(cpp_debug_options)}\
- %{!M:%{!MM:%{!E:%{!S:-o %{|!pipe:%g.s} |\n\
- as %(asm_debug) %(asm_options) %{!pipe:%g.s} %A }}}}", 0},
+ %{!M:%{!MM:%{!E:%{!S:-o %|.s |\n\
+ as %(asm_debug) %(asm_options) %m.s %A }}}}"
+#endif
+ , 0},
+
#include "specs.h"
- /* Mark end of table */
+ /* Mark end of table. */
{0, 0, 0}
};
{"--library-directory", "-L", "a"},
{"--machine", "-m", "aj"},
{"--machine-", "-m", "*j"},
+ {"--no-integrated-cpp", "-no-integrated-cpp", 0},
{"--no-line-commands", "-P", 0},
{"--no-precompiled-includes", "-noprecomp", 0},
{"--no-standard-includes", "-nostdinc", 0},
{"--param", "--param", "a"},
{"--pedantic", "-pedantic", 0},
{"--pedantic-errors", "-pedantic-errors", 0},
+ {"--pie", "-pie", 0},
{"--pipe", "-pipe", 0},
{"--prefix", "-B", "a"},
{"--preprocess", "-E", 0},
{"--static", "-static", 0},
{"--std", "-std=", "aj"},
{"--symbolic", "-symbolic", 0},
- {"--target", "-b", "a"},
{"--time", "-time", 0},
{"--trace-includes", "-H", 0},
{"--traditional", "-traditional", 0},
{"--traditional-cpp", "-traditional-cpp", 0},
{"--trigraphs", "-trigraphs", 0},
{"--undefine-macro", "-U", "aj"},
- {"--use-version", "-V", "a"},
{"--user-dependencies", "-MM", 0},
{"--verbose", "-v", 0},
{"--warn-", "-W", "*j"},
and store its length in *ARGVC. */
static void
-translate_options (argcp, argvp)
- int *argcp;
- const char *const **argvp;
+translate_options (int *argcp, const char *const **argvp)
{
int i;
int argc = *argcp;
const char *const *argv = *argvp;
int newvsize = (argc + 2) * 2 * sizeof (const char *);
- const char **newv =
- (const char **) xmalloc (newvsize);
+ const char **newv = xmalloc (newvsize);
int newindex = 0;
i = 0;
}
newvsize += spaces * sizeof (const char *);
- newv = (const char **) xrealloc (newv, newvsize);
+ newv = xrealloc (newv, newvsize);
sp = target_option_translations[tott_idx].replacements;
np = xstrdup (sp);
nskip += 1;
else if (! strcmp (p, "Xlinker"))
nskip += 1;
+ else if (! strcmp (p, "Xpreprocessor"))
+ nskip += 1;
+ else if (! strcmp (p, "Xassembler"))
+ nskip += 1;
/* Watch out for an option at the end of the command line that
is missing arguments, and avoid skipping past the end of the
}
\f
static char *
-skip_whitespace (p)
- char *p;
+skip_whitespace (char *p)
{
while (1)
{
static const char *gcc_exec_prefix;
+/* Adjusted value of standard_libexec_prefix. */
+
+static const char *gcc_libexec_prefix;
+
/* Default prefixes to attach to command names. */
#ifdef CROSS_COMPILE /* Don't use these prefixes for a cross compiler. */
#define MD_STARTFILE_PREFIX_1 ""
#endif
-/* Supply defaults for the standard prefixes. */
-
-#ifndef STANDARD_EXEC_PREFIX
-#define STANDARD_EXEC_PREFIX "/usr/local/lib/gcc-lib/"
-#endif
-#ifndef STANDARD_STARTFILE_PREFIX
-#define STANDARD_STARTFILE_PREFIX "/usr/local/lib/"
-#endif
-#ifndef TOOLDIR_BASE_PREFIX
-#define TOOLDIR_BASE_PREFIX "/usr/local/"
-#endif
-#ifndef STANDARD_BINDIR_PREFIX
-#define STANDARD_BINDIR_PREFIX "/usr/local/bin"
-#endif
-
static const char *const standard_exec_prefix = STANDARD_EXEC_PREFIX;
-static const char *const standard_exec_prefix_1 = "/usr/lib/gcc/";
+static const char *const standard_exec_prefix_1 = "/usr/libexec/gcc/";
+static const char *const standard_exec_prefix_2 = "/usr/lib/gcc/";
static const char *md_exec_prefix = MD_EXEC_PREFIX;
static const char *md_startfile_prefix = MD_STARTFILE_PREFIX;
static const char *const standard_bindir_prefix = STANDARD_BINDIR_PREFIX;
+static const char *standard_libexec_prefix = STANDARD_LIBEXEC_PREFIX;
+
/* Subdirectory to use for locating libraries. Set by
set_multilib_dir based on the compilation options. */
INIT_STATIC_SPEC ("libgcc", &libgcc_spec),
INIT_STATIC_SPEC ("startfile", &startfile_spec),
INIT_STATIC_SPEC ("switches_need_spaces", &switches_need_spaces),
- INIT_STATIC_SPEC ("predefines", &cpp_predefines),
INIT_STATIC_SPEC ("cross_compile", &cross_compile),
INIT_STATIC_SPEC ("version", &compiler_version),
INIT_STATIC_SPEC ("multilib", &multilib_select),
INIT_STATIC_SPEC ("md_startfile_prefix", &md_startfile_prefix),
INIT_STATIC_SPEC ("md_startfile_prefix_1", &md_startfile_prefix_1),
INIT_STATIC_SPEC ("startfile_prefix_spec", &startfile_prefix_spec),
+ INIT_STATIC_SPEC ("sysroot_suffix_spec", &sysroot_suffix_spec),
+ INIT_STATIC_SPEC ("sysroot_hdrs_suffix_spec", &sysroot_hdrs_suffix_spec),
};
#ifdef EXTRA_SPECS /* additional specs needed */
static struct spec_list *specs = (struct spec_list *) 0;
\f
+/* List of static spec functions. */
+
+static const struct spec_function static_spec_functions[] =
+{
+ { "if-exists", if_exists_spec_function },
+ { "if-exists-else", if_exists_else_spec_function },
+ { 0, 0 }
+};
+
+static int processing_spec_function;
+\f
/* Add appropriate libgcc specs to OBSTACK, taking into account
various permutations of -shared-libgcc, -shared, and such. */
#ifdef ENABLE_SHARED_LIBGCC
static void
-init_gcc_specs (obstack, shared_name, static_name, eh_name)
- struct obstack *obstack;
- const char *shared_name;
- const char *static_name;
- const char *eh_name;
+init_gcc_specs (struct obstack *obstack, const char *shared_name,
+ const char *static_name, const char *eh_name)
{
char *buf;
/* Initialize the specs lookup routines. */
static void
-init_spec ()
+init_spec (void)
{
struct spec_list *next = (struct spec_list *) 0;
struct spec_list *sl = (struct spec_list *) 0;
notice ("Using built-in specs.\n");
#ifdef EXTRA_SPECS
- extra_specs = (struct spec_list *)
- xcalloc (sizeof (struct spec_list), ARRAY_SIZE (extra_specs_1));
+ extra_specs = xcalloc (sizeof (struct spec_list),
+ ARRAY_SIZE (extra_specs_1));
for (i = ARRAY_SIZE (extra_specs_1) - 1; i >= 0; i--)
{
#else
"-lgcc_s%M"
#endif
+#ifdef USE_LIBUNWIND_EXCEPTIONS
+ " -lunwind"
+#endif
,
"-lgcc",
"-lgcc_eh");
current spec. */
static void
-set_spec (name, spec)
- const char *name;
- const char *spec;
+set_spec (const char *name, const char *spec)
{
struct spec_list *sl;
const char *old_spec;
if (!sl)
{
/* Not found - make it. */
- sl = (struct spec_list *) xmalloc (sizeof (struct spec_list));
+ sl = xmalloc (sizeof (struct spec_list));
sl->name = xstrdup (name);
sl->name_len = name_len;
sl->ptr_spec = &sl->ptr;
/* Free the old spec. */
if (old_spec && sl->alloc_p)
- free ((PTR) old_spec);
+ free ((void *) old_spec);
sl->alloc_p = 1;
}
static const char *programname;
\f
+/* Allocate the argument vector. */
+
+static void
+alloc_args (void)
+{
+ argbuf_length = 10;
+ argbuf = xmalloc (argbuf_length * sizeof (const char *));
+}
+
/* Clear out the vector of arguments (after a command is executed). */
static void
-clear_args ()
+clear_args (void)
{
argbuf_index = 0;
}
and the file should be deleted if this compilation fails. */
static void
-store_arg (arg, delete_always, delete_failure)
- const char *arg;
- int delete_always, delete_failure;
+store_arg (const char *arg, int delete_always, int delete_failure)
{
if (argbuf_index + 1 == argbuf_length)
- argbuf
- = (const char **) xrealloc (argbuf,
- (argbuf_length *= 2) * sizeof (const char *));
+ argbuf = xrealloc (argbuf, (argbuf_length *= 2) * sizeof (const char *));
argbuf[argbuf_index++] = arg;
argbuf[argbuf_index] = 0;
a single \n. */
static char *
-load_specs (filename)
- const char *filename;
+load_specs (const char *filename)
{
int desc;
int readlen;
Anything invalid in the file is a fatal error. */
static void
-read_specs (filename, main_p)
- const char *filename;
- int main_p;
+read_specs (const char *filename, int main_p)
{
char *buffer;
char *p;
set_spec (p2, *(sl->ptr_spec));
if (sl->alloc_p)
- free ((PTR) *(sl->ptr_spec));
+ free ((void *) *(sl->ptr_spec));
*(sl->ptr_spec) = "";
sl->alloc_p = 0;
{
/* Add this pair to the vector. */
compilers
- = ((struct compiler *)
- xrealloc (compilers,
- (n_compilers + 2) * sizeof (struct compiler)));
+ = xrealloc (compilers,
+ (n_compilers + 2) * sizeof (struct compiler));
compilers[n_compilers].suffix = suffix;
compilers[n_compilers].spec = spec;
otherwise delete it in any case. */
void
-record_temp_file (filename, always_delete, fail_delete)
- const char *filename;
- int always_delete;
- int fail_delete;
+record_temp_file (const char *filename, int always_delete, int fail_delete)
{
char *const name = xstrdup (filename);
if (! strcmp (name, temp->name))
goto already1;
- temp = (struct temp_file *) xmalloc (sizeof (struct temp_file));
+ temp = xmalloc (sizeof (struct temp_file));
temp->next = always_delete_queue;
temp->name = name;
always_delete_queue = temp;
if (! strcmp (name, temp->name))
goto already2;
- temp = (struct temp_file *) xmalloc (sizeof (struct temp_file));
+ temp = xmalloc (sizeof (struct temp_file));
temp->next = failure_delete_queue;
temp->name = name;
failure_delete_queue = temp;
/* Delete all the temporary files whose names we previously recorded. */
static void
-delete_if_ordinary (name)
- const char *name;
+delete_if_ordinary (const char *name)
{
struct stat st;
#ifdef DEBUG
}
static void
-delete_temp_files ()
+delete_temp_files (void)
{
struct temp_file *temp;
/* Delete all the files to be deleted on error. */
static void
-delete_failure_queue ()
+delete_failure_queue (void)
{
struct temp_file *temp;
}
static void
-clear_failure_queue ()
+clear_failure_queue (void)
{
failure_delete_queue = 0;
}
It is also used by the --print-search-dirs flag. */
static char *
-build_search_list (paths, prefix, check_dir_p)
- struct path_prefix *paths;
- const char *prefix;
- int check_dir_p;
+build_search_list (struct path_prefix *paths, const char *prefix,
+ int check_dir_p)
{
int suffix_len = (machine_suffix) ? strlen (machine_suffix) : 0;
int just_suffix_len
for collect. */
static void
-putenv_from_prefixes (paths, env_var)
- struct path_prefix *paths;
- const char *env_var;
+putenv_from_prefixes (struct path_prefix *paths, const char *env_var)
{
putenv (build_search_list (paths, env_var, 1));
}
\f
-#ifndef VMS
-
-/* FIXME: the location independence code for VMS is hairier than this,
- and hasn't been written. */
-
-/* Split a filename into component directories. */
-
-static char **
-split_directories (name, ptr_num_dirs)
- const char *name;
- int *ptr_num_dirs;
-{
- int num_dirs = 0;
- char **dirs;
- const char *p, *q;
- int ch;
-
- /* Count the number of directories. Special case MSDOS disk names as part
- of the initial directory. */
- p = name;
-#ifdef HAVE_DOS_BASED_FILE_SYSTEM
- if (name[1] == ':' && IS_DIR_SEPARATOR (name[2]))
- {
- p += 3;
- num_dirs++;
- }
-#endif /* HAVE_DOS_BASED_FILE_SYSTEM */
-
- while ((ch = *p++) != '\0')
- {
- if (IS_DIR_SEPARATOR (ch))
- {
- num_dirs++;
- while (IS_DIR_SEPARATOR (*p))
- p++;
- }
- }
-
- dirs = (char **) xmalloc (sizeof (char *) * (num_dirs + 2));
-
- /* Now copy the directory parts. */
- num_dirs = 0;
- p = name;
-#ifdef HAVE_DOS_BASED_FILE_SYSTEM
- if (name[1] == ':' && IS_DIR_SEPARATOR (name[2]))
- {
- dirs[num_dirs++] = save_string (p, 3);
- p += 3;
- }
-#endif /* HAVE_DOS_BASED_FILE_SYSTEM */
-
- q = p;
- while ((ch = *p++) != '\0')
- {
- if (IS_DIR_SEPARATOR (ch))
- {
- while (IS_DIR_SEPARATOR (*p))
- p++;
-
- dirs[num_dirs++] = save_string (q, p - q);
- q = p;
- }
- }
-
- if (p - 1 - q > 0)
- dirs[num_dirs++] = save_string (q, p - 1 - q);
-
- dirs[num_dirs] = NULL;
- if (ptr_num_dirs)
- *ptr_num_dirs = num_dirs;
-
- return dirs;
-}
-
-/* Release storage held by split directories. */
-
-static void
-free_split_directories (dirs)
- char **dirs;
-{
- int i = 0;
-
- while (dirs[i] != NULL)
- free (dirs[i++]);
-
- free ((char *) dirs);
-}
-
-/* Given three strings PROGNAME, BIN_PREFIX, PREFIX, return a string that gets
- to PREFIX starting with the directory portion of PROGNAME and a relative
- pathname of the difference between BIN_PREFIX and PREFIX.
-
- For example, if BIN_PREFIX is /alpha/beta/gamma/gcc/delta, PREFIX is
- /alpha/beta/gamma/omega/, and PROGNAME is /red/green/blue/gcc, then this
- function will return /red/green/blue/../omega.
-
- If no relative prefix can be found, return NULL. */
-
-static char *
-make_relative_prefix (progname, bin_prefix, prefix)
- const char *progname;
- const char *bin_prefix;
- const char *prefix;
-{
- char **prog_dirs, **bin_dirs, **prefix_dirs;
- int prog_num, bin_num, prefix_num, std_loc_p;
- int i, n, common;
-
- prog_dirs = split_directories (progname, &prog_num);
- bin_dirs = split_directories (bin_prefix, &bin_num);
-
- /* If there is no full pathname, try to find the program by checking in each
- of the directories specified in the PATH environment variable. */
- if (prog_num == 1)
- {
- char *temp;
-
- GET_ENVIRONMENT (temp, "PATH");
- if (temp)
- {
- char *startp, *endp, *nstore;
- size_t prefixlen = strlen (temp) + 1;
- if (prefixlen < 2)
- prefixlen = 2;
-
- nstore = (char *) alloca (prefixlen + strlen (progname) + 1);
-
- startp = endp = temp;
- while (1)
- {
- if (*endp == PATH_SEPARATOR || *endp == 0)
- {
- if (endp == startp)
- {
- nstore[0] = '.';
- nstore[1] = DIR_SEPARATOR;
- nstore[2] = '\0';
- }
- else
- {
- strncpy (nstore, startp, endp - startp);
- if (! IS_DIR_SEPARATOR (endp[-1]))
- {
- nstore[endp - startp] = DIR_SEPARATOR;
- nstore[endp - startp + 1] = 0;
- }
- else
- nstore[endp - startp] = 0;
- }
- strcat (nstore, progname);
- if (! access (nstore, X_OK)
-#ifdef HAVE_HOST_EXECUTABLE_SUFFIX
- || ! access (strcat (nstore, HOST_EXECUTABLE_SUFFIX), X_OK)
-#endif
- )
- {
- free_split_directories (prog_dirs);
- progname = nstore;
- prog_dirs = split_directories (progname, &prog_num);
- break;
- }
-
- if (*endp == 0)
- break;
- endp = startp = endp + 1;
- }
- else
- endp++;
- }
- }
- }
-
- /* Remove the program name from comparison of directory names. */
- prog_num--;
-
- /* Determine if the compiler is installed in the standard location, and if
- so, we don't need to specify relative directories. Also, if argv[0]
- doesn't contain any directory specifiers, there is not much we can do. */
- std_loc_p = 0;
- if (prog_num == bin_num)
- {
- for (i = 0; i < bin_num; i++)
- {
- if (strcmp (prog_dirs[i], bin_dirs[i]) != 0)
- break;
- }
-
- if (prog_num <= 0 || i == bin_num)
- {
- std_loc_p = 1;
- free_split_directories (prog_dirs);
- free_split_directories (bin_dirs);
- prog_dirs = bin_dirs = (char **) 0;
- return NULL;
- }
- }
-
- prefix_dirs = split_directories (prefix, &prefix_num);
-
- /* Find how many directories are in common between bin_prefix & prefix. */
- n = (prefix_num < bin_num) ? prefix_num : bin_num;
- for (common = 0; common < n; common++)
- {
- if (strcmp (bin_dirs[common], prefix_dirs[common]) != 0)
- break;
- }
-
- /* If there are no common directories, there can be no relative prefix. */
- if (common == 0)
- {
- free_split_directories (prog_dirs);
- free_split_directories (bin_dirs);
- free_split_directories (prefix_dirs);
- return NULL;
- }
-
- /* Build up the pathnames in argv[0]. */
- for (i = 0; i < prog_num; i++)
- obstack_grow (&obstack, prog_dirs[i], strlen (prog_dirs[i]));
-
- /* Now build up the ..'s. */
- for (i = common; i < n; i++)
- {
- obstack_grow (&obstack, DIR_UP, sizeof (DIR_UP) - 1);
- obstack_1grow (&obstack, DIR_SEPARATOR);
- }
-
- /* Put in directories to move over to prefix. */
- for (i = common; i < prefix_num; i++)
- obstack_grow (&obstack, prefix_dirs[i], strlen (prefix_dirs[i]));
-
- free_split_directories (prog_dirs);
- free_split_directories (bin_dirs);
- free_split_directories (prefix_dirs);
-
- obstack_1grow (&obstack, '\0');
- return obstack_finish (&obstack);
-}
-#endif /* VMS */
-\f
/* Check whether NAME can be accessed in MODE. This is like access,
except that it never considers directories to be executable. */
static int
-access_check (name, mode)
- const char *name;
- int mode;
+access_check (const char *name, int mode)
{
if (mode == X_OK)
{
Return 0 if not found, otherwise return its name, allocated with malloc. */
static char *
-find_a_file (pprefix, name, mode, multilib)
- struct path_prefix *pprefix;
- const char *name;
- int mode, multilib;
+find_a_file (struct path_prefix *pprefix, const char *name, int mode,
+ int multilib)
{
char *temp;
const char *const file_suffix =
/* Determine the filename to execute (special case for absolute paths). */
- if (IS_ABSOLUTE_PATHNAME (name))
+ if (IS_ABSOLUTE_PATH (name))
{
if (access (name, mode) == 0)
{
PREFIX_PRIORITY_LAST
};
-/* Add an entry for PREFIX in PLIST. The PLIST is kept in assending
+/* Add an entry for PREFIX in PLIST. The PLIST is kept in ascending
order according to PRIORITY. Within each PRIORITY, new entries are
appended.
2 means try both machine_suffix and just_machine_suffix. */
static void
-add_prefix (pprefix, prefix, component, priority, require_machine_suffix,
- warn, os_multilib)
- struct path_prefix *pprefix;
- const char *prefix;
- const char *component;
- /* enum prefix_priority */ int priority;
- int require_machine_suffix;
- int *warn;
- int os_multilib;
+add_prefix (struct path_prefix *pprefix, const char *prefix,
+ const char *component, /* enum prefix_priority */ int priority,
+ int require_machine_suffix, int *warn, int os_multilib)
{
struct prefix_list *pl, **prev;
int len;
prev = &(*prev)->next)
;
- /* Keep track of the longest prefix */
+ /* Keep track of the longest prefix. */
prefix = update_path (prefix, component);
len = strlen (prefix);
if (len > pprefix->max_len)
pprefix->max_len = len;
- pl = (struct prefix_list *) xmalloc (sizeof (struct prefix_list));
+ pl = xmalloc (sizeof (struct prefix_list));
pl->prefix = prefix;
pl->require_machine_suffix = require_machine_suffix;
pl->used_flag_ptr = warn;
if (warn)
*warn = 0;
- /* Insert after PREV */
+ /* Insert after PREV. */
pl->next = (*prev);
(*prev) = pl;
}
+
+/* Same as add_prefix, but prepending target_system_root to prefix. */
+static void
+add_sysrooted_prefix (struct path_prefix *pprefix, const char *prefix,
+ const char *component,
+ /* enum prefix_priority */ int priority,
+ int require_machine_suffix, int *warn, int os_multilib)
+{
+ if (!IS_ABSOLUTE_PATH (prefix))
+ abort ();
+
+ if (target_system_root)
+ {
+ if (target_sysroot_suffix)
+ prefix = concat (target_sysroot_suffix, prefix, NULL);
+ prefix = concat (target_system_root, prefix, NULL);
+
+ /* We have to override this because GCC's notion of sysroot
+ moves along with GCC. */
+ component = "GCC";
+ }
+
+ add_prefix (pprefix, prefix, component, priority,
+ require_machine_suffix, warn, os_multilib);
+}
\f
/* Execute the command specified by the arguments on the current line of spec.
When using pipes, this includes several piped-together commands
Return 0 if successful, -1 if failed. */
static int
-execute ()
+execute (void)
{
int i;
int n_commands; /* # of command. */
struct command *commands; /* each command buffer with above info. */
+ if (processing_spec_function)
+ abort ();
+
/* Count # of piped commands. */
for (n_commands = 1, i = 0; i < argbuf_index; i++)
if (strcmp (argbuf[i], "|") == 0)
n_commands++;
/* Get storage for each command. */
- commands = (struct command *) alloca (n_commands * sizeof (struct command));
+ commands = alloca (n_commands * sizeof (struct command));
/* Split argbuf into its separate piped processes,
and record info about each one.
#endif /* DEBUG */
}
+#ifdef ENABLE_VALGRIND_CHECKING
+ /* Run the each command through valgrind. To simplify prepending the
+ path to valgrind and the option "-q" (for quiet operation unless
+ something triggers), we allocate a separate argv array. */
+
+ for (i = 0; i < n_commands; i++)
+ {
+ const char **argv;
+ int argc;
+ int j;
+
+ for (argc = 0; commands[i].argv[argc] != NULL; argc++)
+ ;
+
+ argv = alloca ((argc + 3) * sizeof (char *));
+
+ argv[0] = VALGRIND_PATH;
+ argv[1] = "-q";
+ for (j = 2; j < argc + 2; j++)
+ argv[j] = commands[i].argv[j - 2];
+ argv[j] = NULL;
+
+ commands[i].argv = argv;
+ commands[i].prog = argv[0];
+ }
+#endif
+
/* Run each piped subprocess. */
for (i = 0; i < n_commands; i++)
pfatal_pexecute (errmsg_fmt, errmsg_arg);
if (string != commands[i].prog)
- free ((PTR) string);
+ free ((void *) string);
}
execution_count++;
0 when initialized
1 if the switch is true in a conditional spec,
-1 if false (overridden by a later switch)
- -2 if this switch should be ignored (used in %{<S})
+ -2 if this switch should be ignored (used in %<S)
The `validated' field is nonzero if any spec has looked at this switch;
if it remains zero at the end of the run, it must be meaningless. */
int n_infiles;
+/* True if multiple input files are being compiled to a single
+ assembly file. */
+
+static bool combine_inputs;
+
/* This counts the number of libraries added by lang_specific_driver, so that
we can tell if there were any user supplied any files or libraries. */
is true if we should look for an object suffix. */
static const char *
-convert_filename (name, do_exe, do_obj)
- const char *name;
- int do_exe ATTRIBUTE_UNUSED;
- int do_obj ATTRIBUTE_UNUSED;
+convert_filename (const char *name, int do_exe ATTRIBUTE_UNUSED,
+ int do_obj ATTRIBUTE_UNUSED)
{
#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX)
int i;
\f
/* Display the command line switches accepted by gcc. */
static void
-display_help ()
+display_help (void)
{
printf (_("Usage: %s [options] file...\n"), programname);
fputs (_("Options:\n"), stdout);
fputs (_(" -Wa,<options> Pass comma-separated <options> on to the assembler\n"), stdout);
fputs (_(" -Wp,<options> Pass comma-separated <options> on to the preprocessor\n"), stdout);
fputs (_(" -Wl,<options> Pass comma-separated <options> on to the linker\n"), stdout);
+ fputs (_(" -Xassembler <arg> Pass <arg> on to the assembler\n"), stdout);
+ fputs (_(" -Xpreprocessor <arg> Pass <arg> on to the preprocessor\n"), stdout);
fputs (_(" -Xlinker <arg> Pass <arg> on to the linker\n"), stdout);
fputs (_(" -save-temps Do not delete intermediate files\n"), stdout);
fputs (_(" -pipe Use pipes rather than intermediate files\n"), stdout);
fputs (_(" -o <file> Place the output into <file>\n"), stdout);
fputs (_("\
-x <language> Specify the language of the following input files\n\
- Permissable languages include: c c++ assembler none\n\
+ Permissible languages include: c c++ assembler none\n\
'none' means revert to the default behavior of\n\
guessing the language based on the file's extension\n\
"), stdout);
}
static void
-add_preprocessor_option (option, len)
- const char *option;
- int len;
+add_preprocessor_option (const char *option, int len)
{
n_preprocessor_options++;
if (! preprocessor_options)
- preprocessor_options
- = (char **) xmalloc (n_preprocessor_options * sizeof (char *));
+ preprocessor_options = xmalloc (n_preprocessor_options * sizeof (char *));
else
- preprocessor_options
- = (char **) xrealloc (preprocessor_options,
- n_preprocessor_options * sizeof (char *));
+ preprocessor_options = xrealloc (preprocessor_options,
+ n_preprocessor_options * sizeof (char *));
preprocessor_options [n_preprocessor_options - 1] =
save_string (option, len);
}
static void
-add_assembler_option (option, len)
- const char *option;
- int len;
+add_assembler_option (const char *option, int len)
{
n_assembler_options++;
if (! assembler_options)
- assembler_options
- = (char **) xmalloc (n_assembler_options * sizeof (char *));
+ assembler_options = xmalloc (n_assembler_options * sizeof (char *));
else
- assembler_options
- = (char **) xrealloc (assembler_options,
- n_assembler_options * sizeof (char *));
+ assembler_options = xrealloc (assembler_options,
+ n_assembler_options * sizeof (char *));
assembler_options [n_assembler_options - 1] = save_string (option, len);
}
static void
-add_linker_option (option, len)
- const char *option;
- int len;
+add_linker_option (const char *option, int len)
{
n_linker_options++;
if (! linker_options)
- linker_options
- = (char **) xmalloc (n_linker_options * sizeof (char *));
+ linker_options = xmalloc (n_linker_options * sizeof (char *));
else
- linker_options
- = (char **) xrealloc (linker_options,
- n_linker_options * sizeof (char *));
+ linker_options = xrealloc (linker_options,
+ n_linker_options * sizeof (char *));
linker_options [n_linker_options - 1] = save_string (option, len);
}
Store its length in `n_switches'. */
static void
-process_command (argc, argv)
- int argc;
- const char *const *argv;
+process_command (int argc, const char *const *argv)
{
int i;
const char *temp;
char **new_argv;
char *new_argv0;
int baselen;
-
+
while (argc > 1 && argv[1][0] == '-'
&& (argv[1][1] == 'V' || argv[1][1] == 'b'))
{
for (baselen = strlen (progname); baselen > 0; baselen--)
if (IS_DIR_SEPARATOR (progname[baselen-1]))
break;
- new_argv0 = xmemdup (progname, baselen,
+ new_argv0 = xmemdup (progname, baselen,
baselen + concat_length (new_version, new_machine,
"-gcc-", NULL) + 1);
strcpy (new_argv0 + baselen, new_machine);
/* Set up the default search paths. If there is no GCC_EXEC_PREFIX,
see if we can create it from the pathname specified in argv[0]. */
+ gcc_libexec_prefix = standard_libexec_prefix;
#ifndef VMS
/* FIXME: make_relative_prefix doesn't yet work for VMS. */
if (!gcc_exec_prefix)
{
gcc_exec_prefix = make_relative_prefix (argv[0], standard_bindir_prefix,
standard_exec_prefix);
+ gcc_libexec_prefix = make_relative_prefix (argv[0],
+ standard_bindir_prefix,
+ standard_libexec_prefix);
if (gcc_exec_prefix)
putenv (concat ("GCC_EXEC_PREFIX=", gcc_exec_prefix, NULL));
}
+ else
+ gcc_libexec_prefix = make_relative_prefix (gcc_exec_prefix,
+ standard_exec_prefix,
+ standard_libexec_prefix);
+#else
#endif
if (gcc_exec_prefix)
{
int len = strlen (gcc_exec_prefix);
- if (len > (int) sizeof ("/lib/gcc-lib/") - 1
+ if (len > (int) sizeof ("/lib/gcc/") - 1
&& (IS_DIR_SEPARATOR (gcc_exec_prefix[len-1])))
{
- temp = gcc_exec_prefix + len - sizeof ("/lib/gcc-lib/") + 1;
+ temp = gcc_exec_prefix + len - sizeof ("/lib/gcc/") + 1;
if (IS_DIR_SEPARATOR (*temp)
&& strncmp (temp + 1, "lib", 3) == 0
&& IS_DIR_SEPARATOR (temp[4])
- && strncmp (temp + 5, "gcc-lib", 7) == 0)
- len -= sizeof ("/lib/gcc-lib/") - 1;
+ && strncmp (temp + 5, "gcc", 3) == 0)
+ len -= sizeof ("/lib/gcc/") - 1;
}
set_std_prefix (gcc_exec_prefix, len);
- add_prefix (&exec_prefixes, gcc_exec_prefix, "GCC",
+ add_prefix (&exec_prefixes, gcc_libexec_prefix, "GCC",
PREFIX_PRIORITY_LAST, 0, NULL, 0);
add_prefix (&startfile_prefixes, gcc_exec_prefix, "GCC",
PREFIX_PRIORITY_LAST, 0, NULL, 0);
if (temp)
{
const char *startp, *endp;
- char *nstore = (char *) alloca (strlen (temp) + 3);
+ char *nstore = alloca (strlen (temp) + 3);
startp = endp = temp;
while (1)
if (temp && *cross_compile == '0')
{
const char *startp, *endp;
- char *nstore = (char *) alloca (strlen (temp) + 3);
+ char *nstore = alloca (strlen (temp) + 3);
startp = endp = temp;
while (1)
if (temp && *cross_compile == '0')
{
const char *startp, *endp;
- char *nstore = (char *) alloca (strlen (temp) + 3);
+ char *nstore = alloca (strlen (temp) + 3);
startp = endp = temp;
while (1)
{
/* translate_options () has turned --version into -fversion. */
printf (_("%s (GCC) %s\n"), programname, version_string);
- fputs (_("Copyright (C) 2002 Free Software Foundation, Inc.\n"),
+ fputs (_("Copyright (C) 2003 Free Software Foundation, Inc.\n"),
stdout);
fputs (_("This is free software; see the source for copying conditions. There is NO\n\
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n"),
n_infiles++;
i++;
}
+ else if (strcmp (argv[i], "-Xpreprocessor") == 0)
+ {
+ if (i + 1 == argc)
+ fatal ("argument to `-Xpreprocessor' is missing");
+
+ add_preprocessor_option (argv[i+1], strlen (argv[i+1]));
+ }
+ else if (strcmp (argv[i], "-Xassembler") == 0)
+ {
+ if (i + 1 == argc)
+ fatal ("argument to `-Xassembler' is missing");
+
+ add_assembler_option (argv[i+1], strlen (argv[i+1]));
+ }
else if (strcmp (argv[i], "-l") == 0)
{
if (i + 1 == argc)
}
else if (strcmp (argv[i], "-specs") == 0)
{
- struct user_specs *user = (struct user_specs *)
- xmalloc (sizeof (struct user_specs));
+ struct user_specs *user = xmalloc (sizeof (struct user_specs));
if (++i >= argc)
fatal ("argument to `-specs' is missing");
}
else if (strncmp (argv[i], "-specs=", 7) == 0)
{
- struct user_specs *user = (struct user_specs *)
- xmalloc (sizeof (struct user_specs));
+ struct user_specs *user = xmalloc (sizeof (struct user_specs));
if (strlen (argv[i]) == 7)
fatal ("argument to `-specs=' is missing");
}
else if (strcmp (argv[i], "-time") == 0)
report_times = 1;
+ else if (strcmp (argv[i], "-pipe") == 0)
+ {
+ /* -pipe has to go into the switches array as well as
+ setting a flag. */
+ use_pipes = 1;
+ n_switches++;
+ }
else if (strcmp (argv[i], "-###") == 0)
{
/* This is similar to -v except that there is no execution
for (j = 0; j < ARRAY_SIZE (modify_target); j++)
if (! strcmp (argv[i], modify_target[j].sw))
{
- char *new_name
- = (char *) xmalloc (strlen (modify_target[j].str)
- + strlen (spec_machine));
+ char *new_name = xmalloc (strlen (modify_target[j].str)
+ + strlen (spec_machine));
const char *p, *r;
char *q;
int made_addition = 0;
}
}
- if (have_c && have_o && lang_n_infiles > 1)
- fatal ("cannot specify -o with -c or -S and multiple compilations");
+ combine_inputs = (have_c && have_o && lang_n_infiles > 1);
+
+ if ((save_temps_flag || report_times) && use_pipes)
+ {
+ /* -save-temps overrides -pipe, so that temp files are produced */
+ if (save_temps_flag)
+ error ("warning: -pipe ignored because -save-temps specified");
+ /* -time overrides -pipe because we can't get correct stats when
+ multiple children are running at once. */
+ else if (report_times)
+ error ("warning: -pipe ignored because -time specified");
+
+ use_pipes = 0;
+ }
/* Set up the search paths before we go looking for config files. */
/* Use 2 as fourth arg meaning try just the machine as a suffix,
as well as trying the machine and the version. */
#ifndef OS2
- add_prefix (&exec_prefixes, standard_exec_prefix, "GCC",
+ add_prefix (&exec_prefixes, standard_libexec_prefix, "GCC",
PREFIX_PRIORITY_LAST, 1, warn_std_ptr, 0);
+ add_prefix (&exec_prefixes, standard_libexec_prefix, "BINUTILS",
+ PREFIX_PRIORITY_LAST, 2, warn_std_ptr, 0);
add_prefix (&exec_prefixes, standard_exec_prefix, "BINUTILS",
PREFIX_PRIORITY_LAST, 2, warn_std_ptr, 0);
add_prefix (&exec_prefixes, standard_exec_prefix_1, "BINUTILS",
PREFIX_PRIORITY_LAST, 2, warn_std_ptr, 0);
+ add_prefix (&exec_prefixes, standard_exec_prefix_2, "BINUTILS",
+ PREFIX_PRIORITY_LAST, 2, warn_std_ptr, 0);
#endif
add_prefix (&startfile_prefixes, standard_exec_prefix, "BINUTILS",
PREFIX_PRIORITY_LAST, 1, warn_std_ptr, 0);
- add_prefix (&startfile_prefixes, standard_exec_prefix_1, "BINUTILS",
+ add_prefix (&startfile_prefixes, standard_exec_prefix_2, "BINUTILS",
PREFIX_PRIORITY_LAST, 1, warn_std_ptr, 0);
tooldir_prefix = concat (tooldir_base_prefix, spec_machine,
directories, so that we can search both the user specified directory
and the standard place. */
- if (!IS_ABSOLUTE_PATHNAME (tooldir_prefix))
+ if (!IS_ABSOLUTE_PATH (tooldir_prefix))
{
if (gcc_exec_prefix)
{
concat (tooldir_prefix, "lib", dir_separator_str, NULL),
"BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL, 1);
+#if defined(TARGET_SYSTEM_ROOT_RELOCATABLE) && !defined(VMS)
+ /* If the normal TARGET_SYSTEM_ROOT is inside of $exec_prefix,
+ then consider it to relocate with the rest of the GCC installation
+ if GCC_EXEC_PREFIX is set.
+ ``make_relative_prefix'' is not compiled for VMS, so don't call it. */
+ if (target_system_root && gcc_exec_prefix)
+ {
+ char *tmp_prefix = make_relative_prefix (argv[0],
+ standard_bindir_prefix,
+ target_system_root);
+ if (tmp_prefix && access_check (tmp_prefix, F_OK) == 0)
+ {
+ target_system_root = tmp_prefix;
+ target_system_root_changed = 1;
+ }
+ }
+#endif
+
/* More prefixes are enabled in main, after we read the specs file
and determine whether this is cross-compilation or not. */
/* Then create the space for the vectors and scan again. */
- switches = ((struct switchstr *)
- xmalloc ((n_switches + 1) * sizeof (struct switchstr)));
- infiles = (struct infile *) xmalloc ((n_infiles + 1) * sizeof (struct infile));
+ switches = xmalloc ((n_switches + 1) * sizeof (struct switchstr));
+ infiles = xmalloc ((n_infiles + 1) * sizeof (struct infile));
n_switches = 0;
n_infiles = 0;
last_language_n_infiles = -1;
infiles[n_infiles].language = "*";
infiles[n_infiles++].name = argv[++i];
}
+ else if (strcmp (argv[i], "-Xassembler") == 0)
+ {
+ infiles[n_infiles].language = "*";
+ infiles[n_infiles++].name = argv[++i];
+ }
+ else if (strcmp (argv[i], "-Xpreprocessor") == 0)
+ {
+ infiles[n_infiles].language = "*";
+ infiles[n_infiles++].name = argv[++i];
+ }
else if (strcmp (argv[i], "-l") == 0)
{ /* POSIX allows separation of -l and the lib arg;
canonicalize by concatenating -l with its arg */
;
else if (strcmp (argv[i], "-time") == 0)
;
- else if ((save_temps_flag || report_times)
- && strcmp (argv[i], "-pipe") == 0)
- {
- /* -save-temps overrides -pipe, so that temp files are produced */
- if (save_temps_flag)
- error ("warning: -pipe ignored because -save-temps specified");
- /* -time overrides -pipe because we can't get correct stats when
- multiple children are running at once. */
- else if (report_times)
- error ("warning: -pipe ignored because -time specified");
- }
else if (strcmp (argv[i], "-###") == 0)
;
else if (argv[i][0] == '-' && argv[i][1] != 0)
if (i + n_args >= argc)
fatal ("argument to `-%s' is missing", p);
switches[n_switches].args
- = (const char **) xmalloc ((n_args + 1) * sizeof(const char *));
+ = xmalloc ((n_args + 1) * sizeof(const char *));
while (j < n_args)
switches[n_switches].args[j++] = argv[++i];
/* Null-terminate the vector. */
{
/* On some systems, ld cannot handle some options without
a space. So split the option from its argument. */
- char *part1 = (char *) xmalloc (2);
+ char *part1 = xmalloc (2);
part1[0] = c;
part1[1] = '\0';
switches[n_switches].part1 = part1;
- switches[n_switches].args
- = (const char **) xmalloc (2 * sizeof (const char *));
+ switches[n_switches].args = xmalloc (2 * sizeof (const char *));
switches[n_switches].args[0] = xstrdup (p+1);
switches[n_switches].args[1] = 0;
}
switches[n_switches].live_cond = SWITCH_OK;
switches[n_switches].validated = 0;
switches[n_switches].ordering = 0;
- /* These are always valid, since gcc.c itself understands it. */
+ /* These are always valid, since gcc.c itself understands them. */
if (!strcmp (p, "save-temps")
|| !strcmp (p, "static-libgcc")
- || !strcmp (p, "shared-libgcc"))
+ || !strcmp (p, "shared-libgcc")
+ || !strcmp (p, "pipe"))
switches[n_switches].validated = 1;
else
{
infiles[n_infiles].name = 0;
}
-/* Store switches not filtered out by %{<S} in spec in COLLECT_GCC_OPTIONS
+/* Store switches not filtered out by %<S in spec in COLLECT_GCC_OPTIONS
and place that in the environment. */
static void
-set_collect_gcc_options ()
+set_collect_gcc_options (void)
{
int i;
int first_time;
sans all directory names, and basename_length is the number
of characters starting there excluding the suffix .c or whatever. */
-const char *input_filename;
+static const char *input_filename;
static int input_file_number;
size_t input_filename_length;
static int basename_length;
Returns 0 if the spec is successfully processed; -1 if failed. */
int
-do_spec (spec)
- const char *spec;
+do_spec (const char *spec)
{
int value;
}
static int
-do_spec_2 (spec)
- const char *spec;
+do_spec_2 (const char *spec)
{
+ const char *string;
+ int result;
+
clear_args ();
arg_going = 0;
delete_this_arg = 0;
input_from_pipe = 0;
suffix_subst = NULL;
- return do_spec_1 (spec, 0, NULL);
+ result = do_spec_1 (spec, 0, NULL);
+
+ /* End any pending argument. */
+ if (arg_going)
+ {
+ obstack_1grow (&obstack, 0);
+ string = obstack_finish (&obstack);
+ if (this_is_library_file)
+ string = find_file (string);
+ store_arg (string, delete_this_arg, this_is_output_file);
+ if (this_is_output_file)
+ outfiles[input_file_number] = string;
+ arg_going = 0;
+ }
+
+ return result;
}
-/* Process the sub-spec SPEC as a portion of a larger spec.
- This is like processing a whole spec except that we do
- not initialize at the beginning and we do not supply a
- newline by default at the end.
- INSWITCH nonzero means don't process %-sequences in SPEC;
- in this case, % is treated as an ordinary character.
- This is used while substituting switches.
- INSWITCH nonzero also causes SPC not to terminate an argument.
- Value is zero unless a line was finished
- and the command on that line reported an error. */
+/* Process the given spec string and add any new options to the end
+ of the switches/n_switches array. */
-static int
-do_spec_1 (spec, inswitch, soft_matched_part)
- const char *spec;
- int inswitch;
- const char *soft_matched_part;
+static void
+do_option_spec (const char *name, const char *spec)
{
- const char *p = spec;
- int c;
- int i;
- const char *string;
+ unsigned int i, value_count, value_len;
+ const char *p, *q, *value;
+ char *tmp_spec, *tmp_spec_p;
+
+ if (configure_default_options[0].name == NULL)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE (configure_default_options); i++)
+ if (strcmp (configure_default_options[i].name, name) == 0)
+ break;
+ if (i == ARRAY_SIZE (configure_default_options))
+ return;
+
+ value = configure_default_options[i].value;
+ value_len = strlen (value);
+
+ /* Compute the size of the final spec. */
+ value_count = 0;
+ p = spec;
+ while ((p = strstr (p, "%(VALUE)")) != NULL)
+ {
+ p ++;
+ value_count ++;
+ }
+
+ /* Replace each %(VALUE) by the specified value. */
+ tmp_spec = alloca (strlen (spec) + 1
+ + value_count * (value_len - strlen ("%(VALUE)")));
+ tmp_spec_p = tmp_spec;
+ q = spec;
+ while ((p = strstr (q, "%(VALUE)")) != NULL)
+ {
+ memcpy (tmp_spec_p, q, p - q);
+ tmp_spec_p = tmp_spec_p + (p - q);
+ memcpy (tmp_spec_p, value, value_len);
+ tmp_spec_p += value_len;
+ q = p + strlen ("%(VALUE)");
+ }
+ strcpy (tmp_spec_p, q);
+
+ do_self_spec (tmp_spec);
+}
+
+/* Process the given spec string and add any new options to the end
+ of the switches/n_switches array. */
+
+static void
+do_self_spec (const char *spec)
+{
+ do_spec_2 (spec);
+ do_spec_1 (" ", 0, NULL);
+
+ if (argbuf_index > 0)
+ {
+ int i, first;
+
+ first = n_switches;
+ n_switches += argbuf_index;
+ switches = xrealloc (switches,
+ sizeof (struct switchstr) * (n_switches + 1));
+
+ switches[n_switches] = switches[first];
+ for (i = 0; i < argbuf_index; i++)
+ {
+ struct switchstr *sw;
+
+ /* Each switch should start with '-'. */
+ if (argbuf[i][0] != '-')
+ abort ();
+
+ sw = &switches[i + first];
+ sw->part1 = &argbuf[i][1];
+ sw->args = 0;
+ sw->live_cond = SWITCH_OK;
+ sw->validated = 0;
+ sw->ordering = 0;
+ }
+ }
+}
+
+/* Process the sub-spec SPEC as a portion of a larger spec.
+ This is like processing a whole spec except that we do
+ not initialize at the beginning and we do not supply a
+ newline by default at the end.
+ INSWITCH nonzero means don't process %-sequences in SPEC;
+ in this case, % is treated as an ordinary character.
+ This is used while substituting switches.
+ INSWITCH nonzero also causes SPC not to terminate an argument.
+
+ Value is zero unless a line was finished
+ and the command on that line reported an error. */
+
+static int
+do_spec_1 (const char *spec, int inswitch, const char *soft_matched_part)
+{
+ const char *p = spec;
+ int c;
+ int i;
+ const char *string;
int value;
while ((c = *p++))
if (argbuf_index > 0 && !strcmp (argbuf[argbuf_index - 1], "|"))
{
- for (i = 0; i < n_switches; i++)
- if (!strcmp (switches[i].part1, "pipe"))
- break;
-
/* A `|' before the newline means use a pipe here,
but only if -pipe was specified.
Otherwise, execute now and don't pass the `|' as an arg. */
- if (i < n_switches)
+ if (use_pipes)
{
input_from_pipe = 1;
- switches[i].validated = 1;
break;
}
else
{
struct prefix_list *pl = startfile_prefixes.plist;
size_t bufsize = 100;
- char *buffer = (char *) xmalloc (bufsize);
+ char *buffer = xmalloc (bufsize);
int idx;
for (; pl; pl = pl->next)
/* Relative directories always come from -B,
and it is better not to use them for searching
at run time. In particular, stage1 loses. */
- if (!IS_ABSOLUTE_PATHNAME (pl->prefix))
+ if (!IS_ABSOLUTE_PATH (pl->prefix))
continue;
#endif
/* Try subdirectory if there is one. */
>= bufsize)
bufsize = (strlen (pl->prefix)
+ strlen (machine_suffix)) * 2 + 1;
- buffer = (char *) xrealloc (buffer, bufsize);
+ buffer = xrealloc (buffer, bufsize);
strcpy (buffer, pl->prefix);
strcat (buffer, machine_suffix);
if (is_directory (buffer, multilib_dir, 1))
/* Remove slash from machine_suffix. */
if (strlen (machine_suffix) >= bufsize)
bufsize = strlen (machine_suffix) * 2 + 1;
- buffer = (char *) xrealloc (buffer, bufsize);
+ buffer = xrealloc (buffer, bufsize);
strcpy (buffer, machine_suffix);
idx = strlen (buffer);
if (IS_DIR_SEPARATOR (buffer[idx - 1]))
/* Remove slash from pl->prefix. */
if (strlen (pl->prefix) >= bufsize)
bufsize = strlen (pl->prefix) * 2 + 1;
- buffer = (char *) xrealloc (buffer, bufsize);
+ buffer = xrealloc (buffer, bufsize);
strcpy (buffer, pl->prefix);
idx = strlen (buffer);
if (IS_DIR_SEPARATOR (buffer[idx - 1]))
char *buf;
while (*p != 0 && *p != '\n')
p++;
- buf = (char *) alloca (p - q + 1);
+ buf = alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
error ("%s", buf);
}
break;
case 'n':
- /* %nfoo means report an notice with `foo' on stderr. */
+ /* %nfoo means report a notice with `foo' on stderr. */
{
const char *q = p;
char *buf;
while (*p != 0 && *p != '\n')
p++;
- buf = (char *) alloca (p - q + 1);
+ buf = alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
notice ("%s\n", buf);
{
struct stat st;
- /* If save_temps_flag is off, and the HOST_BIT_BUCKET is defined,
- and it is not a directory, and it is writable, use it.
- Otherwise, fall through and treat this like any other
- temporary file. */
+ /* If save_temps_flag is off, and the HOST_BIT_BUCKET is
+ defined, and it is not a directory, and it is
+ writable, use it. Otherwise, treat this like any
+ other temporary file. */
if ((!save_temps_flag)
&& (stat (HOST_BIT_BUCKET, &st) == 0) && (!S_ISDIR (st.st_mode))
break;
}
}
+ goto create_temp_file;
+ case '|':
+ if (use_pipes)
+ {
+ obstack_1grow (&obstack, '-');
+ delete_this_arg = 0;
+ arg_going = 1;
+
+ /* consume suffix */
+ while (*p == '.' || ISALPHA ((unsigned char) *p))
+ p++;
+ if (p[0] == '%' && p[1] == 'O')
+ p += 2;
+
+ break;
+ }
+ goto create_temp_file;
+ case 'm':
+ if (use_pipes)
+ {
+ /* consume suffix */
+ while (*p == '.' || ISALPHA ((unsigned char) *p))
+ p++;
+ if (p[0] == '%' && p[1] == 'O')
+ p += 2;
+
+ break;
+ }
+ goto create_temp_file;
case 'g':
case 'u':
case 'U':
+ create_temp_file:
{
struct temp_name *t;
int suffix_length;
else
{
saved_suffix
- = (char *) xmalloc (suffix_length
- + strlen (TARGET_OBJECT_SUFFIX));
+ = xmalloc (suffix_length
+ + strlen (TARGET_OBJECT_SUFFIX));
strncpy (saved_suffix, suffix, suffix_length);
strcpy (saved_suffix + suffix_length,
TARGET_OBJECT_SUFFIX);
temp_filename = alloca (temp_filename_length + 1);
strncpy ((char *) temp_filename, input_basename, basename_length);
strncpy ((char *) temp_filename + basename_length, suffix,
- suffix_length);
+ suffix_length);
*((char *) temp_filename + temp_filename_length) = '\0';
if (strcmp (temp_filename, input_filename) != 0)
{
- struct stat st_temp;
+ struct stat st_temp;
- /* Note, set_input() resets input_stat_set to 0. */
- if (input_stat_set == 0)
- {
- input_stat_set = stat (input_filename, &input_stat);
- if (input_stat_set >= 0)
- input_stat_set = 1;
- }
+ /* Note, set_input() resets input_stat_set to 0. */
+ if (input_stat_set == 0)
+ {
+ input_stat_set = stat (input_filename, &input_stat);
+ if (input_stat_set >= 0)
+ input_stat_set = 1;
+ }
- /* If we have the stat for the input_filename
- and we can do the stat for the temp_filename
- then the they could still refer to the same
- file if st_dev/st_ino's are the same. */
+ /* If we have the stat for the input_filename
+ and we can do the stat for the temp_filename
+ then the they could still refer to the same
+ file if st_dev/st_ino's are the same. */
if (input_stat_set != 1
|| stat (temp_filename, &st_temp) < 0
temp_filename = save_string (temp_filename,
temp_filename_length + 1);
obstack_grow (&obstack, temp_filename,
- temp_filename_length);
+ temp_filename_length);
arg_going = 1;
+ delete_this_arg = 0;
break;
}
}
for (t = temp_names; t; t = t->next)
if (t->length == suffix_length
&& strncmp (t->suffix, suffix, suffix_length) == 0
- && t->unique == (c != 'g'))
+ && t->unique == (c == 'u' || c == 'U' || c == 'j'))
break;
/* Make a new association if needed. %u and %j
{
if (t == 0)
{
- t = (struct temp_name *) xmalloc (sizeof (struct temp_name));
+ t = xmalloc (sizeof (struct temp_name));
t->next = temp_names;
temp_names = t;
}
}
else
t->suffix = save_string (suffix, suffix_length);
- t->unique = (c != 'g');
+ t->unique = (c == 'u' || c == 'U' || c == 'j');
temp_filename = make_temp_file (t->suffix);
temp_filename_length = strlen (temp_filename);
t->filename = temp_filename;
break;
case 'i':
- obstack_grow (&obstack, input_filename, input_filename_length);
- arg_going = 1;
+ if (combine_inputs)
+ {
+ for (i = 0; (int) i < n_infiles; i++)
+ store_arg (infiles[i].name, 0, 0);
+ }
+ else
+ {
+ obstack_grow (&obstack, input_filename, input_filename_length);
+ arg_going = 1;
+ }
break;
case 'I':
do_spec_1 (" ", 0, NULL);
}
+ if (target_system_root_changed ||
+ (target_system_root && target_sysroot_hdrs_suffix))
+ {
+ do_spec_1 ("-isysroot", 1, NULL);
+ /* Make this a separate argument. */
+ do_spec_1 (" ", 0, NULL);
+ do_spec_1 (target_system_root, 1, NULL);
+ if (target_sysroot_hdrs_suffix)
+ do_spec_1 (target_sysroot_hdrs_suffix, 1, NULL);
+ do_spec_1 (" ", 0, NULL);
+ }
+
for (; pl; pl = pl->next)
{
do_spec_1 ("-isystem", 1, NULL);
this_is_library_file = 1;
break;
+ case 'V':
+ outfiles[input_file_number] = NULL;
+ break;
+
case 'w':
this_is_output_file = 1;
break;
p = handle_braces (p + 1);
if (p == 0)
return -1;
+ /* End any pending argument. */
+ if (arg_going)
+ {
+ obstack_1grow (&obstack, 0);
+ string = obstack_finish (&obstack);
+ if (this_is_library_file)
+ string = find_file (string);
+ store_arg (string, delete_this_arg, this_is_output_file);
+ if (this_is_output_file)
+ outfiles[input_file_number] = string;
+ arg_going = 0;
+ }
/* If any args were output, mark the last one for deletion
on failure. */
if (argbuf_index != cur_index)
}
break;
- case 'p':
- {
- char *x = (char *) alloca (strlen (cpp_predefines) + 1);
- char *buf = x;
- const char *y;
-
- /* Copy all of the -D options in CPP_PREDEFINES into BUF. */
- y = cpp_predefines;
- while (*y != 0)
- {
- if (! strncmp (y, "-D", 2))
- /* Copy the whole option. */
- while (*y && *y != ' ' && *y != '\t')
- *x++ = *y++;
- else if (*y == ' ' || *y == '\t')
- /* Copy whitespace to the result. */
- *x++ = *y++;
- /* Don't copy other options. */
- else
- y++;
- }
-
- *x = 0;
-
- value = do_spec_1 (buf, 0, NULL);
- if (value != 0)
- return value;
- }
- break;
-
- case 'P':
- {
- char *x = (char *) alloca (strlen (cpp_predefines) * 4 + 1);
- char *buf = x;
- const char *y;
-
- /* Copy all of CPP_PREDEFINES into BUF,
- but force them all into the reserved name space if they
- aren't already there. The reserved name space is all
- identifiers beginning with two underscores or with one
- underscore and a capital letter. We do the forcing by
- adding up to two underscores to the beginning and end
- of each symbol. e.g. mips, _mips, mips_, and _mips_ all
- become __mips__. */
- y = cpp_predefines;
- while (*y != 0)
- {
- if (! strncmp (y, "-D", 2))
- {
- int flag = 0;
-
- *x++ = *y++;
- *x++ = *y++;
-
- if (*y != '_'
- || (*(y + 1) != '_'
- && ! ISUPPER ((unsigned char) *(y + 1))))
- {
- /* Stick __ at front of macro name. */
- if (*y != '_')
- *x++ = '_';
- *x++ = '_';
- /* Arrange to stick __ at the end as well. */
- flag = 1;
- }
-
- /* Copy the macro name. */
- while (*y && *y != '=' && *y != ' ' && *y != '\t')
- *x++ = *y++;
-
- if (flag)
- {
- if (x[-1] != '_')
- {
- if (x[-2] != '_')
- *x++ = '_';
- *x++ = '_';
- }
- }
-
- /* Copy the value given, if any. */
- while (*y && *y != ' ' && *y != '\t')
- *x++ = *y++;
- }
- else if (*y == ' ' || *y == '\t')
- /* Copy whitespace to the result. */
- *x++ = *y++;
- /* Don't copy -A options */
- else
- y++;
- }
- *x++ = ' ';
-
- /* Copy all of CPP_PREDEFINES into BUF,
- but put __ after every -D. */
- y = cpp_predefines;
- while (*y != 0)
- {
- if (! strncmp (y, "-D", 2))
- {
- y += 2;
-
- if (*y != '_'
- || (*(y + 1) != '_'
- && ! ISUPPER ((unsigned char) *(y + 1))))
- {
- /* Stick -D__ at front of macro name. */
- *x++ = '-';
- *x++ = 'D';
- if (*y != '_')
- *x++ = '_';
- *x++ = '_';
-
- /* Copy the macro name. */
- while (*y && *y != '=' && *y != ' ' && *y != '\t')
- *x++ = *y++;
-
- /* Copy the value given, if any. */
- while (*y && *y != ' ' && *y != '\t')
- *x++ = *y++;
- }
- else
- {
- /* Do not copy this macro - we have just done it before */
- while (*y && *y != ' ' && *y != '\t')
- y++;
- }
- }
- else if (*y == ' ' || *y == '\t')
- /* Copy whitespace to the result. */
- *x++ = *y++;
- /* Don't copy -A options. */
- else
- y++;
- }
- *x++ = ' ';
-
- /* Copy all of the -A options in CPP_PREDEFINES into BUF. */
- y = cpp_predefines;
- while (*y != 0)
- {
- if (! strncmp (y, "-A", 2))
- /* Copy the whole option. */
- while (*y && *y != ' ' && *y != '\t')
- *x++ = *y++;
- else if (*y == ' ' || *y == '\t')
- /* Copy whitespace to the result. */
- *x++ = *y++;
- /* Don't copy other options. */
- else
- y++;
- }
-
- *x = 0;
-
- value = do_spec_1 (buf, 0, NULL);
- if (value != 0)
- return value;
- }
+ case 'R':
+ /* We assume there is a directory
+ separator at the end of this string. */
+ if (target_system_root)
+ {
+ obstack_grow (&obstack, target_system_root,
+ strlen (target_system_root));
+ if (target_sysroot_suffix)
+ obstack_grow (&obstack, target_sysroot_suffix,
+ strlen (target_sysroot_suffix));
+ }
break;
case 'S':
return -1;
break;
+ case ':':
+ p = handle_spec_function (p);
+ if (p == 0)
+ return -1;
+ break;
+
case '%':
obstack_1grow (&obstack, '%');
break;
}
break;
+ /* Henceforth ignore the option(s) matching the pattern
+ after the %<. */
+ case '<':
+ {
+ unsigned len = 0;
+ int have_wildcard = 0;
+ int i;
+
+ while (p[len] && p[len] != ' ' && p[len] != '\t')
+ len++;
+
+ if (p[len-1] == '*')
+ have_wildcard = 1;
+
+ for (i = 0; i < n_switches; i++)
+ if (!strncmp (switches[i].part1, p, len - have_wildcard)
+ && (have_wildcard || switches[i].part1[len] == '\0'))
+ {
+ switches[i].live_cond = SWITCH_IGNORE;
+ switches[i].validated = 1;
+ }
+
+ p += len;
+ }
+ break;
+
case '*':
if (soft_matched_part)
{
}
else
{
- char *x = (char *) alloca (strlen (name) * 2 + 1);
+ char *x = alloca (strlen (name) * 2 + 1);
char *buf = x;
const char *y = name;
int flag = 0;
}
break;
- case 'v':
- {
- int c1 = *p++; /* Select first or second version number. */
- const char *v = compiler_version;
- const char *q;
- static const char zeroc = '0';
-
- /* The format of the version string is
- ([^0-9]*-)?[0-9]+[.][0-9]+([.][0-9]+)?([- ].*)? */
-
- /* Ignore leading non-digits. i.e. "foo-" in "foo-2.7.2". */
- while (! ISDIGIT (*v))
- v++;
- if (v > compiler_version && v[-1] != '-')
- abort ();
-
- /* If desired, advance to second version number. */
- if (c1 >= '2')
- {
- /* Set V after the first period. */
- while (ISDIGIT (*v))
- v++;
- if (*v != '.')
- abort ();
- v++;
- }
-
- /* If desired, advance to third version number.
- But don't complain if it's not present */
- if (c1 == '3')
- {
- /* Set V after the second period. */
- while (ISDIGIT (*v))
- v++;
- if ((*v != 0) && (*v != ' ') && (*v != '.') && (*v != '-'))
- abort ();
- if (*v != 0)
- v++;
- }
-
- /* Set Q at the next period or at the end. */
- q = v;
- while (ISDIGIT (*q))
- q++;
- if (*q != 0 && q > v && *q != ' ' && *q != '.' && *q != '-')
- abort ();
-
- if (q > v)
- /* Put that part into the command. */
- obstack_grow (&obstack, v, q - v);
- else
- /* Default to "0" */
- obstack_grow (&obstack, &zeroc, 1);
- arg_going = 1;
- }
- break;
-
- case '|':
- if (input_from_pipe)
- do_spec_1 ("-", 0, NULL);
- break;
-
default:
error ("spec failure: unrecognized spec option '%c'", c);
break;
/* Backslash: treat next character as ordinary. */
c = *p++;
- /* fall through */
+ /* Fall through. */
default:
/* Ordinary character: put it into the current argument. */
obstack_1grow (&obstack, c);
arg_going = 1;
}
- /* End of string. */
+ /* End of string. If we are processing a spec function, we need to
+ end any pending argument. */
+ if (processing_spec_function && arg_going)
+ {
+ obstack_1grow (&obstack, 0);
+ string = obstack_finish (&obstack);
+ if (this_is_library_file)
+ string = find_file (string);
+ store_arg (string, delete_this_arg, this_is_output_file);
+ if (this_is_output_file)
+ outfiles[input_file_number] = string;
+ arg_going = 0;
+ }
+
return 0;
}
-/* Return 0 if we call do_spec_1 and that returns -1. */
+/* Look up a spec function. */
-static const char *
-handle_braces (p)
- const char *p;
+static const struct spec_function *
+lookup_spec_function (const char *name)
{
- const char *filter, *body = NULL, *endbody = NULL;
- int pipe_p = 0;
- int true_once = 0; /* If, in %{a|b:d}, at least one of a,b was seen. */
- int negate;
- int suffix;
- int include_blanks = 1;
- int elide_switch = 0;
- int ordered = 0;
-
- if (*p == '^')
+ static const struct spec_function * const spec_function_tables[] =
+ {
+ static_spec_functions,
+ lang_specific_spec_functions,
+ };
+ const struct spec_function *sf;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE (spec_function_tables); i++)
{
- /* A '^' after the open-brace means to not give blanks before args. */
- include_blanks = 0;
- ++p;
+ for (sf = spec_function_tables[i]; sf->name != NULL; sf++)
+ if (strcmp (sf->name, name) == 0)
+ return sf;
}
- if (*p == '|')
+ return NULL;
+}
+
+/* Evaluate a spec function. */
+
+static const char *
+eval_spec_function (const char *func, const char *args)
+{
+ const struct spec_function *sf;
+ const char *funcval;
+
+ /* Saved spec processing context. */
+ int save_argbuf_index;
+ int save_argbuf_length;
+ const char **save_argbuf;
+
+ int save_arg_going;
+ int save_delete_this_arg;
+ int save_this_is_output_file;
+ int save_this_is_library_file;
+ int save_input_from_pipe;
+ const char *save_suffix_subst;
+
+
+ sf = lookup_spec_function (func);
+ if (sf == NULL)
+ fatal ("unknown spec function `%s'", func);
+
+ /* Push the spec processing context. */
+ save_argbuf_index = argbuf_index;
+ save_argbuf_length = argbuf_length;
+ save_argbuf = argbuf;
+
+ save_arg_going = arg_going;
+ save_delete_this_arg = delete_this_arg;
+ save_this_is_output_file = this_is_output_file;
+ save_this_is_library_file = this_is_library_file;
+ save_input_from_pipe = input_from_pipe;
+ save_suffix_subst = suffix_subst;
+
+ /* Create a new spec processing context, and build the function
+ arguments. */
+
+ alloc_args ();
+ if (do_spec_2 (args) < 0)
+ fatal ("error in args to spec function `%s'", func);
+
+ /* argbuf_index is an index for the next argument to be inserted, and
+ so contains the count of the args already inserted. */
+
+ funcval = (*sf->func) (argbuf_index, argbuf);
+
+ /* Pop the spec processing context. */
+ argbuf_index = save_argbuf_index;
+ argbuf_length = save_argbuf_length;
+ free (argbuf);
+ argbuf = save_argbuf;
+
+ arg_going = save_arg_going;
+ delete_this_arg = save_delete_this_arg;
+ this_is_output_file = save_this_is_output_file;
+ this_is_library_file = save_this_is_library_file;
+ input_from_pipe = save_input_from_pipe;
+ suffix_subst = save_suffix_subst;
+
+ return funcval;
+}
+
+/* Handle a spec function call of the form:
+
+ %:function(args)
+
+ ARGS is processed as a spec in a separate context and split into an
+ argument vector in the normal fashion. The function returns a string
+ containing a spec which we then process in the caller's context, or
+ NULL if no processing is required. */
+
+static const char *
+handle_spec_function (const char *p)
+{
+ char *func, *args;
+ const char *endp, *funcval;
+ int count;
+
+ processing_spec_function++;
+
+ /* Get the function name. */
+ for (endp = p; *endp != '\0'; endp++)
{
- /* A `|' after the open-brace means,
- if the test fails, output a single minus sign rather than nothing.
- This is used in %{|!pipe:...}. */
- pipe_p = 1;
- ++p;
+ if (*endp == '(') /* ) */
+ break;
+ /* Only allow [A-Za-z0-9], -, and _ in function names. */
+ if (!ISALNUM (*endp) && !(*endp == '-' || *endp == '_'))
+ fatal ("malformed spec function name");
}
+ if (*endp != '(') /* ) */
+ fatal ("no arguments for spec function");
+ func = save_string (p, endp - p);
+ p = ++endp;
- if (*p == '<')
+ /* Get the arguments. */
+ for (count = 0; *endp != '\0'; endp++)
{
- /* A `<' after the open-brace means that the switch should be
- removed from the command-line. */
- elide_switch = 1;
- ++p;
+ /* ( */
+ if (*endp == ')')
+ {
+ if (count == 0)
+ break;
+ count--;
+ }
+ else if (*endp == '(') /* ) */
+ count++;
}
+ /* ( */
+ if (*endp != ')')
+ fatal ("malformed spec function arguments");
+ args = save_string (p, endp - p);
+ p = ++endp;
-next_member:
- negate = suffix = 0;
+ /* p now points to just past the end of the spec function expression. */
- if (*p == '!')
- /* A `!' after the open-brace negates the condition:
- succeed if the specified switch is not present. */
- negate = 1, ++p;
+ funcval = eval_spec_function (func, args);
+ if (funcval != NULL && do_spec_1 (funcval, 0, NULL) < 0)
+ p = NULL;
- if (*p == '.')
- /* A `.' after the open-brace means test against the current suffix. */
- {
- if (pipe_p)
- abort ();
+ free (func);
+ free (args);
- suffix = 1;
- ++p;
- }
+ processing_spec_function--;
- if (elide_switch && (negate || pipe_p || suffix))
- {
- /* It doesn't make sense to mix elision with other flags. We
- could fatal() here, but the standard seems to be to abort. */
- abort ();
- }
+ return p;
+}
- next_ampersand:
- filter = p;
- while (*p != ':' && *p != '}' && *p != '|' && *p != '&')
- p++;
+/* Inline subroutine of handle_braces. Returns true if the current
+ input suffix matches the atom bracketed by ATOM and END_ATOM. */
+static inline bool
+input_suffix_matches (const char *atom, const char *end_atom)
+{
+ return (input_suffix
+ && !strncmp (input_suffix, atom, end_atom - atom)
+ && input_suffix[end_atom - atom] == '\0');
+}
- if (*p == '|' && (pipe_p || ordered))
- abort ();
+/* Inline subroutine of handle_braces. Returns true if a switch
+ matching the atom bracketed by ATOM and END_ATOM appeared on the
+ command line. */
+static inline bool
+switch_matches (const char *atom, const char *end_atom, int starred)
+{
+ int i;
+ int len = end_atom - atom;
+ int plen = starred ? len : -1;
- if (!body)
- {
- if (*p != '}' && *p != '&')
- {
- int count = 1;
- const char *q = p;
+ for (i = 0; i < n_switches; i++)
+ if (!strncmp (switches[i].part1, atom, len)
+ && (starred || switches[i].part1[len] == '\0')
+ && check_live_switch (i, plen))
+ return true;
- while (*q++ != ':')
- continue;
- body = q;
+ return false;
+}
- while (count > 0)
- {
- if (*q == '{')
- count++;
- else if (*q == '}')
- count--;
- else if (*q == 0)
- fatal ("mismatched braces in specs");
- q++;
- }
- endbody = q;
- }
- else
- body = p, endbody = p + 1;
- }
+/* Inline subroutine of handle_braces. Mark all of the switches which
+ match ATOM (extends to END_ATOM; STARRED indicates whether there
+ was a star after the atom) for later processing. */
+static inline void
+mark_matching_switches (const char *atom, const char *end_atom, int starred)
+{
+ int i;
+ int len = end_atom - atom;
+ int plen = starred ? len : -1;
+
+ for (i = 0; i < n_switches; i++)
+ if (!strncmp (switches[i].part1, atom, len)
+ && (starred || switches[i].part1[len] == '\0')
+ && check_live_switch (i, plen))
+ switches[i].ordering = 1;
+}
- if (suffix)
- {
- int found = (input_suffix != 0
- && (long) strlen (input_suffix) == (long) (p - filter)
- && strncmp (input_suffix, filter, p - filter) == 0);
+/* Inline subroutine of handle_braces. Process all the currently
+ marked switches through give_switch, and clear the marks. */
+static inline void
+process_marked_switches (void)
+{
+ int i;
- if (body[0] == '}')
- abort ();
+ for (i = 0; i < n_switches; i++)
+ if (switches[i].ordering == 1)
+ {
+ switches[i].ordering = 0;
+ give_switch (i, 0);
+ }
+}
- if (negate != found
- && do_spec_1 (save_string (body, endbody-body-1), 0, NULL) < 0)
- return 0;
- }
- else if (p[-1] == '*' && (p[0] == '}' || p[0] == '&'))
- {
- /* Substitute all matching switches as separate args. */
- int i;
+/* Handle a %{ ... } construct. P points just inside the leading {.
+ Returns a pointer one past the end of the brace block, or 0
+ if we call do_spec_1 and that returns -1. */
- for (i = 0; i < n_switches; i++)
- if (!strncmp (switches[i].part1, filter, p - 1 - filter)
- && check_live_switch (i, p - 1 - filter))
- {
- if (elide_switch)
- {
- switches[i].live_cond = SWITCH_IGNORE;
- switches[i].validated = 1;
- }
- else
- ordered = 1, switches[i].ordering = 1;
- }
- }
- else
+static const char *
+handle_braces (const char *p)
+{
+ const char *atom, *end_atom;
+ const char *d_atom = NULL, *d_end_atom = NULL;
+
+ bool a_is_suffix;
+ bool a_is_starred;
+ bool a_is_negated;
+ bool a_matched;
+
+ bool a_must_be_last = false;
+ bool ordered_set = false;
+ bool disjunct_set = false;
+ bool disj_matched = false;
+ bool disj_starred = true;
+ bool n_way_choice = false;
+ bool n_way_matched = false;
+
+#define SKIP_WHITE() do { while (*p == ' ' || *p == '\t') p++; } while (0)
+
+ do
{
- /* Test for presence of the specified switch. */
- int i;
- int present = 0;
+ if (a_must_be_last)
+ abort ();
- /* If name specified ends in *, as in {x*:...},
- check for %* and handle that case. */
- if (p[-1] == '*' && !negate)
- {
- int substitution;
- const char *r = body;
+ /* Scan one "atom" (S in the description above of %{}, possibly
+ with !, ., or * modifiers). */
+ a_matched = a_is_suffix = a_is_starred = a_is_negated = false;
- /* First see whether we have %*. */
- substitution = 0;
- while (r < endbody)
- {
- if (*r == '%' && r[1] == '*')
- substitution = 1;
- r++;
- }
- /* If we do, handle that case. */
- if (substitution)
- {
- /* Substitute all matching switches as separate args.
- But do this by substituting for %*
- in the text that follows the colon. */
+ SKIP_WHITE();
+ if (*p == '!')
+ p++, a_is_negated = true;
- unsigned hard_match_len = p - filter - 1;
- char *string = save_string (body, endbody - body - 1);
+ SKIP_WHITE();
+ if (*p == '.')
+ p++, a_is_suffix = true;
- for (i = 0; i < n_switches; i++)
- if (!strncmp (switches[i].part1, filter, hard_match_len)
- && check_live_switch (i, -1))
- {
- do_spec_1 (string, 0, &switches[i].part1[hard_match_len]);
- /* Pass any arguments this switch has. */
- give_switch (i, 1, 1);
- suffix_subst = NULL;
- }
+ atom = p;
+ while (ISIDNUM(*p) || *p == '-' || *p == '+' || *p == '='
+ || *p == ',' || *p == '.' || *p == '@')
+ p++;
+ end_atom = p;
- /* We didn't match. Try again. */
- if (*p++ == '|')
- goto next_member;
- return endbody;
- }
- }
+ if (*p == '*')
+ p++, a_is_starred = 1;
- /* If name specified ends in *, as in {x*:...},
- check for presence of any switch name starting with x. */
- if (p[-1] == '*')
+ SKIP_WHITE();
+ if (*p == '&' || *p == '}')
{
- for (i = 0; i < n_switches; i++)
- {
- unsigned hard_match_len = p - filter - 1;
+ /* Substitute the switch(es) indicated by the current atom. */
+ ordered_set = true;
+ if (disjunct_set || n_way_choice || a_is_negated || a_is_suffix
+ || atom == end_atom)
+ abort ();
- if (!strncmp (switches[i].part1, filter, hard_match_len)
- && check_live_switch (i, hard_match_len))
- {
- present = 1;
- break;
- }
- }
+ mark_matching_switches (atom, end_atom, a_is_starred);
+
+ if (*p == '}')
+ process_marked_switches ();
}
- /* Otherwise, check for presence of exact name specified. */
- else
+ else if (*p == '|' || *p == ':')
{
- for (i = 0; i < n_switches; i++)
+ /* Substitute some text if the current atom appears as a switch
+ or suffix. */
+ disjunct_set = true;
+ if (ordered_set)
+ abort ();
+
+ if (atom == end_atom)
{
- if (!strncmp (switches[i].part1, filter, p - filter)
- && switches[i].part1[p - filter] == 0
- && check_live_switch (i, -1))
- {
- present = 1;
- break;
- }
+ if (!n_way_choice || disj_matched || *p == '|'
+ || a_is_negated || a_is_suffix || a_is_starred)
+ abort ();
+
+ /* An empty term may appear as the last choice of an
+ N-way choice set; it means "otherwise". */
+ a_must_be_last = true;
+ disj_matched = !n_way_matched;
+ disj_starred = false;
+ }
+ else
+ {
+ if (a_is_suffix && a_is_starred)
+ abort ();
+
+ if (!a_is_starred)
+ disj_starred = false;
+
+ /* Don't bother testing this atom if we already have a
+ match. */
+ if (!disj_matched && !n_way_matched)
+ {
+ if (a_is_suffix)
+ a_matched = input_suffix_matches (atom, end_atom);
+ else
+ a_matched = switch_matches (atom, end_atom, a_is_starred);
+
+ if (a_matched != a_is_negated)
+ {
+ disj_matched = true;
+ d_atom = atom;
+ d_end_atom = end_atom;
+ }
+ }
}
- }
- /* If it is as desired (present for %{s...}, absent for %{!s...})
- then substitute either the switch or the specified
- conditional text. */
- if (present != negate)
- {
- if (elide_switch)
+ if (*p == ':')
{
- switches[i].live_cond = SWITCH_IGNORE;
- switches[i].validated = 1;
+ /* Found the body, that is, the text to substitute if the
+ current disjunction matches. */
+ p = process_brace_body (p + 1, d_atom, d_end_atom, disj_starred,
+ disj_matched && !n_way_matched);
+ if (p == 0)
+ return 0;
+
+ /* If we have an N-way choice, reset state for the next
+ disjunction. */
+ if (*p == ';')
+ {
+ n_way_choice = true;
+ n_way_matched |= disj_matched;
+ disj_matched = false;
+ disj_starred = true;
+ d_atom = d_end_atom = NULL;
+ }
}
- else if (ordered || *p == '&')
- ordered = 1, switches[i].ordering = 1;
- else if (*p == '}')
- give_switch (i, 0, include_blanks);
- else
- /* Even if many alternatives are matched, only output once. */
- true_once = 1;
- }
- else if (pipe_p)
- {
- /* Here if a %{|...} conditional fails: output a minus sign,
- which means "standard output" or "standard input". */
- do_spec_1 ("-", 0, NULL);
- return endbody;
}
+ else
+ abort ();
}
+ while (*p++ != '}');
- /* We didn't match; try again. */
- if (*p++ == '|')
- goto next_member;
+ return p;
- if (p[-1] == '&')
- {
- body = 0;
- goto next_ampersand;
- }
+#undef SKIP_WHITE
+}
- if (ordered)
+/* Subroutine of handle_braces. Scan and process a brace substitution body
+ (X in the description of %{} syntax). P points one past the colon;
+ ATOM and END_ATOM bracket the first atom which was found to be true
+ (present) in the current disjunction; STARRED indicates whether all
+ the atoms in the current disjunction were starred (for syntax validation);
+ MATCHED indicates whether the disjunction matched or not, and therefore
+ whether or not the body is to be processed through do_spec_1 or just
+ skipped. Returns a pointer to the closing } or ;, or 0 if do_spec_1
+ returns -1. */
+
+static const char *
+process_brace_body (const char *p, const char *atom, const char *end_atom,
+ int starred, int matched)
+{
+ const char *body, *end_body;
+ unsigned int nesting_level;
+ bool have_subst = false;
+
+ /* Locate the closing } or ;, honoring nested braces.
+ Trim trailing whitespace. */
+ body = p;
+ nesting_level = 1;
+ for (;;)
{
- int i;
- /* Doing this set of switches later preserves their command-line
- ordering. This is needed for e.g. -U, -D and -A. */
- for (i = 0; i < n_switches; i++)
- if (switches[i].ordering == 1)
- {
- switches[i].ordering = 0;
- give_switch (i, 0, include_blanks);
- }
+ if (*p == '{')
+ nesting_level++;
+ else if (*p == '}')
+ {
+ if (!--nesting_level)
+ break;
+ }
+ else if (*p == ';' && nesting_level == 1)
+ break;
+ else if (*p == '%' && p[1] == '*' && nesting_level == 1)
+ have_subst = true;
+ else if (*p == '\0')
+ abort ();
+ p++;
}
- /* Process the spec just once, regardless of match count. */
- else if (true_once)
+
+ end_body = p;
+ while (end_body[-1] == ' ' || end_body[-1] == '\t')
+ end_body--;
+
+ if (have_subst && !starred)
+ abort ();
+
+ if (matched)
{
- if (do_spec_1 (save_string (body, endbody - body - 1),
- 0, NULL) < 0)
- return 0;
+ /* Copy the substitution body to permanent storage and execute it.
+ If have_subst is false, this is a simple matter of running the
+ body through do_spec_1... */
+ char *string = save_string (body, end_body - body);
+ if (!have_subst)
+ {
+ if (do_spec_1 (string, 0, NULL) < 0)
+ return 0;
+ }
+ else
+ {
+ /* ... but if have_subst is true, we have to process the
+ body once for each matching switch, with %* set to the
+ variant part of the switch. */
+ unsigned int hard_match_len = end_atom - atom;
+ int i;
+
+ for (i = 0; i < n_switches; i++)
+ if (!strncmp (switches[i].part1, atom, hard_match_len)
+ && check_live_switch (i, hard_match_len))
+ {
+ if (do_spec_1 (string, 0,
+ &switches[i].part1[hard_match_len]) < 0)
+ return 0;
+ /* Pass any arguments this switch has. */
+ give_switch (i, 1);
+ suffix_subst = NULL;
+ }
+ }
}
- return endbody;
+ return p;
}
\f
/* Return 0 iff switch number SWITCHNUM is obsoleted by a later switch
with the "no-", similarly for a switch with the "no-" prefix. */
static int
-check_live_switch (switchnum, prefix_length)
- int switchnum;
- int prefix_length;
+check_live_switch (int switchnum, int prefix_length)
{
const char *name = switches[switchnum].part1;
int i;
the vector of switches gcc received, which is `switches'.
This cannot fail since it never finishes a command line.
- If OMIT_FIRST_WORD is nonzero, then we omit .part1 of the argument.
-
- If INCLUDE_BLANKS is nonzero, then we include blanks before each argument
- of the switch. */
+ If OMIT_FIRST_WORD is nonzero, then we omit .part1 of the argument. */
static void
-give_switch (switchnum, omit_first_word, include_blanks)
- int switchnum;
- int omit_first_word;
- int include_blanks;
+give_switch (int switchnum, int omit_first_word)
{
if (switches[switchnum].live_cond == SWITCH_IGNORE)
return;
{
const char *arg = *p;
- if (include_blanks)
- do_spec_1 (" ", 0, NULL);
+ do_spec_1 (" ", 0, NULL);
if (suffix_subst)
{
unsigned length = strlen (arg);
Return the absolute file name found. If nothing is found, return NAME. */
static const char *
-find_file (name)
- const char *name;
+find_file (const char *name)
{
char *newname;
limit. */
static int
-is_directory (path1, path2, linker)
- const char *path1;
- const char *path2;
- int linker;
+is_directory (const char *path1, const char *path2, int linker)
{
int len1 = strlen (path1);
int len2 = strlen (path2);
- char *path = (char *) alloca (3 + len1 + len2);
+ char *path = alloca (3 + len1 + len2);
char *cp;
struct stat st;
the input file named FILENAME. */
void
-set_input (filename)
- const char *filename;
+set_input (const char *filename)
{
const char *p;
/* On fatal signals, delete all the temporary files. */
static void
-fatal_error (signum)
- int signum;
+fatal_error (int signum)
{
signal (signum, SIG_DFL);
delete_failure_queue ();
kill (getpid (), signum);
}
-extern int main PARAMS ((int, const char *const *));
+extern int main (int, const char *const *);
int
-main (argc, argv)
- int argc;
- const char *const *argv;
+main (int argc, const char *const *argv)
{
size_t i;
int value;
int linker_was_run = 0;
+ int num_linker_inputs = 0;
char *explicit_link_files;
char *specs_file;
const char *p;
signal (SIGCHLD, SIG_DFL);
#endif
- argbuf_length = 10;
- argbuf = (const char **) xmalloc (argbuf_length * sizeof (const char *));
+ /* Allocate the argument vector. */
+ alloc_args ();
obstack_init (&obstack);
/* Initialize the vector of specs to just the default.
This means one element containing 0s, as a terminator. */
- compilers = (struct compiler *) xmalloc (sizeof default_compilers);
- memcpy ((char *) compilers, (char *) default_compilers,
- sizeof default_compilers);
+ compilers = xmalloc (sizeof default_compilers);
+ memcpy (compilers, default_compilers, sizeof default_compilers);
n_compilers = n_default_compilers;
/* Read specs from a file if there is one. */
/* We need to check standard_exec_prefix/just_machine_suffix/specs
for any override of as, ld and libraries. */
- specs_file = (char *) alloca (strlen (standard_exec_prefix)
- + strlen (just_machine_suffix)
- + sizeof ("specs"));
+ specs_file = alloca (strlen (standard_exec_prefix)
+ + strlen (just_machine_suffix) + sizeof ("specs"));
strcpy (specs_file, standard_exec_prefix);
strcat (specs_file, just_machine_suffix);
if (access (specs_file, R_OK) == 0)
read_specs (specs_file, TRUE);
- /* If not cross-compiling, look for startfiles in the standard places.
- Similarly, don't add the standard prefixes if startfile handling
- will be under control of startfile_prefix_spec. */
- if (*cross_compile == '0' && *startfile_prefix_spec == 0)
+ /* Process any configure-time defaults specified for the command line
+ options, via OPTION_DEFAULT_SPECS. */
+ for (i = 0; i < ARRAY_SIZE (option_default_specs); i++)
+ do_option_spec (option_default_specs[i].name,
+ option_default_specs[i].spec);
+
+ /* Process DRIVER_SELF_SPECS, adding any new options to the end
+ of the command line. */
+
+ for (i = 0; i < ARRAY_SIZE (driver_self_specs); i++)
+ do_self_spec (driver_self_specs[i]);
+
+ /* If not cross-compiling, look for executables in the standard
+ places. */
+ if (*cross_compile == '0')
{
if (*md_exec_prefix)
{
add_prefix (&exec_prefixes, md_exec_prefix, "GCC",
PREFIX_PRIORITY_LAST, 0, NULL, 0);
- add_prefix (&startfile_prefixes, md_exec_prefix, "GCC",
- PREFIX_PRIORITY_LAST, 0, NULL, 0);
}
+ }
+
+ /* Process sysroot_suffix_spec. */
+ if (*sysroot_suffix_spec != 0
+ && do_spec_2 (sysroot_suffix_spec) == 0)
+ {
+ if (argbuf_index > 1)
+ error ("spec failure: more than one arg to SYSROOT_SUFFIX_SPEC.");
+ else if (argbuf_index == 1)
+ target_sysroot_suffix = xstrdup (argbuf[argbuf_index -1]);
+ }
+
+ /* Process sysroot_hdrs_suffix_spec. */
+ if (*sysroot_hdrs_suffix_spec != 0
+ && do_spec_2 (sysroot_hdrs_suffix_spec) == 0)
+ {
+ if (argbuf_index > 1)
+ error ("spec failure: more than one arg to SYSROOT_HEADERS_SUFFIX_SPEC.");
+ else if (argbuf_index == 1)
+ target_sysroot_hdrs_suffix = xstrdup (argbuf[argbuf_index -1]);
+ }
+
+ /* Look for startfiles in the standard places. */
+ if (*startfile_prefix_spec != 0
+ && do_spec_2 (startfile_prefix_spec) == 0
+ && do_spec_1 (" ", 0, NULL) == 0)
+ {
+ int ndx;
+ for (ndx = 0; ndx < argbuf_index; ndx++)
+ add_sysrooted_prefix (&startfile_prefixes, argbuf[ndx], "BINUTILS",
+ PREFIX_PRIORITY_LAST, 0, NULL, 1);
+ }
+ /* We should eventually get rid of all these and stick to
+ startfile_prefix_spec exclusively. */
+ else if (*cross_compile == '0' || target_system_root)
+ {
+ if (*md_exec_prefix)
+ add_sysrooted_prefix (&startfile_prefixes, md_exec_prefix, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL, 1);
if (*md_startfile_prefix)
- add_prefix (&startfile_prefixes, md_startfile_prefix, "GCC",
- PREFIX_PRIORITY_LAST, 0, NULL, 1);
+ add_sysrooted_prefix (&startfile_prefixes, md_startfile_prefix,
+ "GCC", PREFIX_PRIORITY_LAST, 0, NULL, 1);
if (*md_startfile_prefix_1)
- add_prefix (&startfile_prefixes, md_startfile_prefix_1, "GCC",
- PREFIX_PRIORITY_LAST, 0, NULL, 1);
+ add_sysrooted_prefix (&startfile_prefixes, md_startfile_prefix_1,
+ "GCC", PREFIX_PRIORITY_LAST, 0, NULL, 1);
/* If standard_startfile_prefix is relative, base it on
standard_exec_prefix. This lets us move the installed tree
as a unit. If GCC_EXEC_PREFIX is defined, base
- standard_startfile_prefix on that as well. */
- if (IS_ABSOLUTE_PATHNAME (standard_startfile_prefix))
- add_prefix (&startfile_prefixes, standard_startfile_prefix, "BINUTILS",
- PREFIX_PRIORITY_LAST, 0, NULL, 1);
- else
+ standard_startfile_prefix on that as well.
+
+ If the prefix is relative, only search it for native compilers;
+ otherwise we will search a directory containing host libraries. */
+ if (IS_ABSOLUTE_PATH (standard_startfile_prefix))
+ add_sysrooted_prefix (&startfile_prefixes,
+ standard_startfile_prefix, "BINUTILS",
+ PREFIX_PRIORITY_LAST, 0, NULL, 1);
+ else if (*cross_compile == '0')
{
if (gcc_exec_prefix)
add_prefix (&startfile_prefixes,
NULL, PREFIX_PRIORITY_LAST, 0, NULL, 1);
}
- add_prefix (&startfile_prefixes, standard_startfile_prefix_1,
- "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL, 1);
- add_prefix (&startfile_prefixes, standard_startfile_prefix_2,
- "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL, 1);
+ add_sysrooted_prefix (&startfile_prefixes, standard_startfile_prefix_1,
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL, 1);
+ add_sysrooted_prefix (&startfile_prefixes, standard_startfile_prefix_2,
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL, 1);
#if 0 /* Can cause surprises, and one can use -B./ instead. */
add_prefix (&startfile_prefixes, "./", NULL,
PREFIX_PRIORITY_LAST, 1, NULL, 0);
#endif
}
- else
- {
- if (!IS_ABSOLUTE_PATHNAME (standard_startfile_prefix)
- && gcc_exec_prefix)
- add_prefix (&startfile_prefixes,
- concat (gcc_exec_prefix, machine_suffix,
- standard_startfile_prefix, NULL),
- "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL, 1);
- }
-
- if (*startfile_prefix_spec != 0
- && do_spec_2 (startfile_prefix_spec) == 0
- && do_spec_1 (" ", 0, NULL) == 0)
- {
- int ndx;
- for (ndx = 0; ndx < argbuf_index; ndx++)
- add_prefix (&startfile_prefixes, argbuf[ndx], "BINUTILS",
- PREFIX_PRIORITY_LAST, 0, NULL, 1);
- }
/* Process any user specified specs in the order given on the command
line. */
i = n_infiles;
i += lang_specific_extra_outfiles;
- outfiles = (const char **) xcalloc (i, sizeof (char *));
+ outfiles = xcalloc (i, sizeof (char *));
/* Record which files were specified explicitly as link input. */
explicit_link_files = xcalloc (1, n_infiles);
- for (i = 0; (int) i < n_infiles; i++)
+ if (combine_inputs)
+ {
+ int lang_n_infiles = 0;
+ for (i = 0; (int) i < n_infiles; i++)
+ {
+ const char *name = infiles[i].name;
+ struct compiler *compiler
+ = lookup_compiler (name, strlen (name), infiles[i].language);
+ if (compiler == NULL)
+ error ("%s: linker input file unused because linking not done",
+ name);
+ else if (lang_n_infiles > 0 && compiler != input_file_compiler)
+ fatal ("cannot specify -o with -c or -S and multiple languages");
+ else
+ {
+ lang_n_infiles++;
+ input_file_compiler = compiler;
+ }
+ }
+ }
+
+ for (i = 0; (int) i < (combine_inputs ? 1 : n_infiles); i++)
{
int this_file_error = 0;
/* Figure out which compiler from the file's suffix. */
- input_file_compiler
- = lookup_compiler (infiles[i].name, input_filename_length,
- infiles[i].language);
+ if (! combine_inputs)
+ input_file_compiler
+ = lookup_compiler (infiles[i].name, input_filename_length,
+ infiles[i].language);
if (input_file_compiler)
{
error_count++;
}
+ /* Determine if there are any linker input files. */
+ num_linker_inputs = 0;
+ for (i = 0; (int) i < n_infiles; i++)
+ if (explicit_link_files[i] || outfiles[i] != NULL)
+ num_linker_inputs++;
+
/* Run ld to link all the compiler output files. */
- if (error_count == 0)
+ if (num_linker_inputs > 0 && error_count == 0)
{
int tmp = execution_count;
or 0 if this file is to be passed to the linker. */
static struct compiler *
-lookup_compiler (name, length, language)
- const char *name;
- size_t length;
- const char *language;
+lookup_compiler (const char *name, size_t length, const char *language)
{
struct compiler *cp;
}
\f
static char *
-save_string (s, len)
- const char *s;
- int len;
+save_string (const char *s, int len)
{
char *result = xmalloc (len + 1);
}
void
-pfatal_with_name (name)
- const char *name;
+pfatal_with_name (const char *name)
{
perror_with_name (name);
delete_temp_files ();
}
static void
-perror_with_name (name)
- const char *name;
+perror_with_name (const char *name)
{
error ("%s: %s", name, xstrerror (errno));
}
static void
-pfatal_pexecute (errmsg_fmt, errmsg_arg)
- const char *errmsg_fmt;
- const char *errmsg_arg;
+pfatal_pexecute (const char *errmsg_fmt, const char *errmsg_arg)
{
if (errmsg_arg)
{
pfatal_with_name (errmsg_fmt);
}
-/* Output an error message and exit */
+/* Output an error message and exit. */
void
-fancy_abort ()
+fancy_abort (void)
{
fatal ("internal gcc abort");
}
\f
-/* Output an error message and exit */
+/* Output an error message and exit. */
void
-fatal VPARAMS ((const char *msgid, ...))
+fatal (const char *msgid, ...)
{
- VA_OPEN (ap, msgid);
- VA_FIXEDARG (ap, const char *, msgid);
+ va_list ap;
+
+ va_start (ap, msgid);
fprintf (stderr, "%s: ", programname);
vfprintf (stderr, _(msgid), ap);
- VA_CLOSE (ap);
+ va_end (ap);
fprintf (stderr, "\n");
delete_temp_files ();
exit (1);
}
void
-error VPARAMS ((const char *msgid, ...))
+error (const char *msgid, ...)
{
- VA_OPEN (ap, msgid);
- VA_FIXEDARG (ap, const char *, msgid);
+ va_list ap;
+ va_start (ap, msgid);
fprintf (stderr, "%s: ", programname);
vfprintf (stderr, _(msgid), ap);
- VA_CLOSE (ap);
+ va_end (ap);
fprintf (stderr, "\n");
}
static void
-notice VPARAMS ((const char *msgid, ...))
+notice (const char *msgid, ...)
{
- VA_OPEN (ap, msgid);
- VA_FIXEDARG (ap, const char *, msgid);
+ va_list ap;
+ va_start (ap, msgid);
vfprintf (stderr, _(msgid), ap);
- VA_CLOSE (ap);
+ va_end (ap);
}
\f
+static inline void
+validate_switches_from_spec (const char *spec)
+{
+ const char *p = spec;
+ char c;
+ while ((c = *p++))
+ if (c == '%' && (*p == '{' || *p == '<' || (*p == 'W' && *++p == '{')))
+ /* We have a switch spec. */
+ p = validate_switches (p + 1);
+}
+
static void
-validate_all_switches ()
+validate_all_switches (void)
{
struct compiler *comp;
- const char *p;
- char c;
struct spec_list *spec;
for (comp = compilers; comp->spec; comp++)
- {
- p = comp->spec;
- while ((c = *p++))
- if (c == '%' && (*p == '{' || (*p == 'W' && *++p == '{')))
- /* We have a switch spec. */
- validate_switches (p + 1);
- }
+ validate_switches_from_spec (comp->spec);
/* Look through the linked list of specs read from the specs file. */
for (spec = specs; spec; spec = spec->next)
- {
- p = *(spec->ptr_spec);
- while ((c = *p++))
- if (c == '%' && (*p == '{' || (*p == 'W' && *++p == '{')))
- /* We have a switch spec. */
- validate_switches (p + 1);
- }
+ validate_switches_from_spec (*spec->ptr_spec);
- p = link_command_spec;
- while ((c = *p++))
- if (c == '%' && (*p == '{' || (*p == 'W' && *++p == '{')))
- /* We have a switch spec. */
- validate_switches (p + 1);
+ validate_switches_from_spec (link_command_spec);
}
/* Look at the switch-name that comes after START
and mark as valid all supplied switches that match it. */
-static void
-validate_switches (start)
- const char *start;
+static const char *
+validate_switches (const char *start)
{
const char *p = start;
- const char *filter;
+ const char *atom;
+ size_t len;
int i;
- int suffix;
+ bool suffix = false;
+ bool starred = false;
- if (*p == '|')
- ++p;
+#define SKIP_WHITE() do { while (*p == ' ' || *p == '\t') p++; } while (0)
next_member:
+ SKIP_WHITE ();
+
if (*p == '!')
- ++p;
+ p++;
- suffix = 0;
+ SKIP_WHITE ();
if (*p == '.')
- suffix = 1, ++p;
+ suffix = true, p++;
- filter = p;
- while (*p != ':' && *p != '}' && *p != '|' && *p != '&')
+ atom = p;
+ while (ISIDNUM (*p) || *p == '-' || *p == '+' || *p == '='
+ || *p == ',' || *p == '.' || *p == '@')
p++;
+ len = p - atom;
- if (suffix)
- ;
- else if (p[-1] == '*')
+ if (*p == '*')
+ starred = true, p++;
+
+ SKIP_WHITE ();
+
+ if (!suffix)
{
/* Mark all matching switches as valid. */
for (i = 0; i < n_switches; i++)
- if (!strncmp (switches[i].part1, filter, p - filter - 1))
+ if (!strncmp (switches[i].part1, atom, len)
+ && (starred || switches[i].part1[len] == 0))
switches[i].validated = 1;
}
- else
+
+ if (*p) p++;
+ if (*p && (p[-1] == '|' || p[-1] == '&'))
+ goto next_member;
+
+ if (*p && p[-1] == ':')
{
- /* Mark an exact matching switch as valid. */
- for (i = 0; i < n_switches; i++)
+ while (*p && *p != ';' && *p != '}')
{
- if (!strncmp (switches[i].part1, filter, p - filter)
- && switches[i].part1[p - filter] == 0)
- switches[i].validated = 1;
+ if (*p == '%')
+ {
+ p++;
+ if (*p == '{' || *p == '<')
+ p = validate_switches (p+1);
+ else if (p[0] == 'W' && p[1] == '{')
+ p = validate_switches (p+2);
+ }
+ else
+ p++;
}
+
+ if (*p) p++;
+ if (*p && p[-1] == ';')
+ goto next_member;
}
- if (*p++ == '|' || p[-1] == '&')
- goto next_member;
+ return p;
+#undef SKIP_WHITE
}
\f
struct mdswitchstr
canonicalize the switches to keep only the ones we care about. */
static int
-used_arg (p, len)
- const char *p;
- int len;
+used_arg (const char *p, int len)
{
struct mswitchstr
{
if (*q == ';')
cnt++;
- matches =
- (struct mswitchstr *) alloca ((sizeof (struct mswitchstr)) * cnt);
+ matches = alloca ((sizeof (struct mswitchstr)) * cnt);
i = 0;
q = multilib_matches;
while (*q != '\0')
xmalloc from calling fatal, and prevents us from re-executing this
block of code. */
mswitches
- = (struct mswitchstr *)
- xmalloc (sizeof (struct mswitchstr)
+ = xmalloc (sizeof (struct mswitchstr)
* (n_mdswitches + (n_switches ? n_switches : 1)));
for (i = 0; i < n_switches; i++)
{
}
static int
-default_arg (p, len)
- const char *p;
- int len;
+default_arg (const char *p, int len)
{
int i;
will be used. */
static void
-set_multilib_dir ()
+set_multilib_dir (void)
{
const char *p;
unsigned int this_path_len;
{
int i = 0;
- mdswitches
- = (struct mdswitchstr *) xmalloc (sizeof (struct mdswitchstr)
- * n_mdswitches);
+ mdswitches = xmalloc (sizeof (struct mdswitchstr) * n_mdswitches);
for (start = multilib_defaults; *start != '\0'; start = end + 1)
{
while (*start == ' ' || *start == '\t')
if (*start == '\0')
break;
-
+
for (end = start + 1;
*end != ' ' && *end != '\t' && *end != '\0'; end++)
;
the exclusions. */
static void
-print_multilib_info ()
+print_multilib_info (void)
{
const char *p = multilib_select;
const char *last_path = 0, *this_path;
++p;
}
}
+\f
+/* if-exists built-in spec function.
+
+ Checks to see if the file specified by the absolute pathname in
+ ARGS exists. Returns that pathname if found.
+
+ The usual use for this function is to check for a library file
+ (whose name has been expanded with %s). */
+
+static const char *
+if_exists_spec_function (int argc, const char **argv)
+{
+ /* Must have only one argument. */
+ if (argc == 1 && IS_ABSOLUTE_PATH (argv[0]) && ! access (argv[0], R_OK))
+ return argv[0];
+
+ return NULL;
+}
+
+/* if-exists-else built-in spec function.
+
+ This is like if-exists, but takes an additional argument which
+ is returned if the first argument does not exist. */
+
+static const char *
+if_exists_else_spec_function (int argc, const char **argv)
+{
+ /* Must have exactly two arguments. */
+ if (argc != 2)
+ return NULL;
+
+ if (IS_ABSOLUTE_PATH (argv[0]) && ! access (argv[0], R_OK))
+ return argv[0];
+
+ return argv[1];
+}