/* Subroutines for manipulating rtx's in semantically interesting ways.
Copyright (C) 1987, 1991, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "ggc.h"
#include "recog.h"
#include "langhooks.h"
+#include "target.h"
+#include "output.h"
static rtx break_out_memory_refs (rtx);
static void emit_stack_probe (rtx);
if (TREE_CODE (exp) == WITH_SIZE_EXPR)
size = TREE_OPERAND (exp, 1);
else
- size = SUBSTITUTE_PLACEHOLDER_IN_EXPR (lang_hooks.expr_size (exp), exp);
+ {
+ size = lang_hooks.expr_size (exp);
+ gcc_assert (size);
+ size = SUBSTITUTE_PLACEHOLDER_IN_EXPR (size, exp);
+ }
- return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype), 0);
+ return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype), EXPAND_NORMAL);
}
/* Return a wide integer for the size in bytes of the value of EXP, or -1
if (TREE_CODE (exp) == WITH_SIZE_EXPR)
size = TREE_OPERAND (exp, 1);
else
- size = lang_hooks.expr_size (exp);
+ {
+ size = lang_hooks.expr_size (exp);
+ gcc_assert (size);
+ }
if (size == 0 || !host_integerp (size, 0))
return -1;
rtx op1 = break_out_memory_refs (XEXP (x, 1));
if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
- x = gen_rtx_fmt_ee (GET_CODE (x), Pmode, op0, op1);
+ x = simplify_gen_binary (GET_CODE (x), Pmode, op0, op1);
}
return x;
rtx x)
{
#ifndef POINTERS_EXTEND_UNSIGNED
+ gcc_assert (GET_MODE (x) == to_mode || GET_MODE (x) == VOIDmode);
return x;
#else /* defined(POINTERS_EXTEND_UNSIGNED) */
enum machine_mode from_mode;
case MULT:
/* For addition we can safely permute the conversion and addition
operation if one operand is a constant and converting the constant
- does not change it. We can always safely permute them if we are
- making the address narrower. */
+ does not change it or if one operand is a constant and we are
+ using a ptr_extend instruction (POINTERS_EXTEND_UNSIGNED < 0).
+ We can always safely permute them if we are making the address
+ narrower. */
if (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (from_mode)
|| (GET_CODE (x) == PLUS
&& GET_CODE (XEXP (x, 1)) == CONST_INT
- && XEXP (x, 1) == convert_memory_address (to_mode, XEXP (x, 1))))
+ && (XEXP (x, 1) == convert_memory_address (to_mode, XEXP (x, 1))
+ || POINTERS_EXTEND_UNSIGNED < 0)))
return gen_rtx_fmt_ee (GET_CODE (x), to_mode,
convert_memory_address (to_mode, XEXP (x, 0)),
XEXP (x, 1));
x, POINTERS_EXTEND_UNSIGNED);
#endif /* defined(POINTERS_EXTEND_UNSIGNED) */
}
-
-/* Given a memory address or facsimile X, construct a new address,
- currently equivalent, that is stable: future stores won't change it.
-
- X must be composed of constants, register and memory references
- combined with addition, subtraction and multiplication:
- in other words, just what you can get from expand_expr if sum_ok is 1.
-
- Works by making copies of all regs and memory locations used
- by X and combining them the same way X does.
- You could also stabilize the reference to this address
- by copying the address to a register with copy_to_reg;
- but then you wouldn't get indexed addressing in the reference. */
-
-rtx
-copy_all_regs (rtx x)
-{
- if (REG_P (x))
- {
- if (REGNO (x) != FRAME_POINTER_REGNUM
-#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
- && REGNO (x) != HARD_FRAME_POINTER_REGNUM
-#endif
- )
- x = copy_to_reg (x);
- }
- else if (MEM_P (x))
- x = copy_to_reg (x);
- else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS
- || GET_CODE (x) == MULT)
- {
- rtx op0 = copy_all_regs (XEXP (x, 0));
- rtx op1 = copy_all_regs (XEXP (x, 1));
- if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
- x = gen_rtx_fmt_ee (GET_CODE (x), Pmode, op0, op1);
- }
- return x;
-}
\f
/* Return something equivalent to X but valid as a memory address
for something of mode MODE. When X is not itself valid, this
/* At this point, any valid address is accepted. */
if (memory_address_p (mode, x))
- goto win;
+ goto done;
/* If it was valid before but breaking out memory refs invalidated it,
use it the old way. */
if (memory_address_p (mode, oldx))
- goto win2;
+ {
+ x = oldx;
+ goto done;
+ }
/* Perform machine-dependent transformations on X
in certain cases. This is not necessary since the code
below can handle all possible cases, but machine-dependent
transformations can make better code. */
- LEGITIMIZE_ADDRESS (x, oldx, mode, win);
+ LEGITIMIZE_ADDRESS (x, oldx, mode, done);
/* PLUS and MULT can appear in special ways
as the result of attempts to make an address usable for indexing.
the register is a valid address. */
else
x = force_reg (Pmode, x);
-
- goto done;
-
- win2:
- x = oldx;
- win:
- if (flag_force_addr && ! cse_not_expected && !REG_P (x)
- /* Don't copy an addr via a reg if it is one of our stack slots. */
- && ! (GET_CODE (x) == PLUS
- && (XEXP (x, 0) == virtual_stack_vars_rtx
- || XEXP (x, 0) == virtual_incoming_args_rtx)))
- {
- if (general_operand (x, Pmode))
- x = force_reg (Pmode, x);
- else
- x = force_operand (x, NULL_RTX);
- }
}
done:
+ gcc_assert (memory_address_p (mode, x));
/* If we didn't change the address, we are done. Otherwise, mark
a reg as a pointer if we have REG or REG + CONST_INT. */
if (oldx == x)
return x;
}
-/* Like `memory_address' but pretend `flag_force_addr' is 0. */
-
-rtx
-memory_address_noforce (enum machine_mode mode, rtx x)
-{
- int ambient_force_addr = flag_force_addr;
- rtx val;
-
- flag_force_addr = 0;
- val = memory_address (mode, x);
- flag_force_addr = ambient_force_addr;
- return val;
-}
-
/* Convert a mem ref into one with a valid memory address.
Pass through anything else unchanged. */
{
if (!MEM_P (ref))
return ref;
- if (! (flag_force_addr && CONSTANT_ADDRESS_P (XEXP (ref, 0)))
- && memory_address_p (GET_MODE (ref), XEXP (ref, 0)))
+ ref = use_anchored_address (ref);
+ if (memory_address_p (GET_MODE (ref), XEXP (ref, 0)))
return ref;
/* Don't alter REF itself, since that is probably a stack slot. */
return replace_equiv_address (ref, XEXP (ref, 0));
}
-\f
-/* Return a modified copy of X with its memory address copied
- into a temporary register to protect it from side effects.
- If X is not a MEM, it is returned unchanged (and not copied).
- Perhaps even if it is a MEM, if there is no need to change it. */
+
+/* If X is a memory reference to a member of an object block, try rewriting
+ it to use an anchor instead. Return the new memory reference on success
+ and the old one on failure. */
rtx
-stabilize (rtx x)
+use_anchored_address (rtx x)
{
- if (!MEM_P (x)
- || ! rtx_unstable_p (XEXP (x, 0)))
+ rtx base;
+ HOST_WIDE_INT offset;
+
+ if (!flag_section_anchors)
+ return x;
+
+ if (!MEM_P (x))
return x;
- return
- replace_equiv_address (x, force_reg (Pmode, copy_all_regs (XEXP (x, 0))));
+ /* Split the address into a base and offset. */
+ base = XEXP (x, 0);
+ offset = 0;
+ if (GET_CODE (base) == CONST
+ && GET_CODE (XEXP (base, 0)) == PLUS
+ && GET_CODE (XEXP (XEXP (base, 0), 1)) == CONST_INT)
+ {
+ offset += INTVAL (XEXP (XEXP (base, 0), 1));
+ base = XEXP (XEXP (base, 0), 0);
+ }
+
+ /* Check whether BASE is suitable for anchors. */
+ if (GET_CODE (base) != SYMBOL_REF
+ || !SYMBOL_REF_HAS_BLOCK_INFO_P (base)
+ || SYMBOL_REF_ANCHOR_P (base)
+ || SYMBOL_REF_BLOCK (base) == NULL
+ || !targetm.use_anchors_for_symbol_p (base))
+ return x;
+
+ /* Decide where BASE is going to be. */
+ place_block_symbol (base);
+
+ /* Get the anchor we need to use. */
+ offset += SYMBOL_REF_BLOCK_OFFSET (base);
+ base = get_section_anchor (SYMBOL_REF_BLOCK (base), offset,
+ SYMBOL_REF_TLS_MODEL (base));
+
+ /* Work out the offset from the anchor. */
+ offset -= SYMBOL_REF_BLOCK_OFFSET (base);
+
+ /* If we're going to run a CSE pass, force the anchor into a register.
+ We will then be able to reuse registers for several accesses, if the
+ target costs say that that's worthwhile. */
+ if (!cse_not_expected)
+ base = force_reg (GET_MODE (base), base);
+
+ return replace_equiv_address (x, plus_constant (base, offset));
}
\f
/* Copy the value or contents of X to a new temp reg and return that reg. */
align = MIN (sa, ca);
}
+ else if (MEM_P (x) && MEM_POINTER (x))
+ align = MEM_ALIGN (x);
if (align)
mark_reg_pointer (temp, align);
#endif
enum machine_mode
-promote_mode (tree type, enum machine_mode mode, int *punsignedp,
+promote_mode (const_tree type, enum machine_mode mode, int *punsignedp,
int for_call ATTRIBUTE_UNUSED)
{
- enum tree_code code = TREE_CODE (type);
+ const enum tree_code code = TREE_CODE (type);
int unsignedp = *punsignedp;
#ifndef PROMOTE_MODE
{
#ifdef PROMOTE_FUNCTION_MODE
case INTEGER_TYPE: case ENUMERAL_TYPE: case BOOLEAN_TYPE:
- case CHAR_TYPE: case REAL_TYPE: case OFFSET_TYPE:
+ case REAL_TYPE: case OFFSET_TYPE: case FIXED_POINT_TYPE:
#ifdef PROMOTE_MODE
if (for_call)
{
/* Round the size of a block to be pushed up to the boundary required
by this machine. SIZE is the desired size, which need not be constant. */
-rtx
+static rtx
round_push (rtx size)
{
int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
rtx seq;
start_sequence ();
+ do_pending_stack_adjust ();
/* We must validize inside the sequence, to ensure that any instructions
created by the validize call also get moved to the right place. */
if (sa != 0)
}
else
{
+ do_pending_stack_adjust ();
if (sa != 0)
sa = validize_mem (sa);
emit_insn (fcn (sa, stack_pointer_rtx));
gen_rtx_MEM (BLKmode, stack_pointer_rtx)));
}
+ discard_pending_stack_adjust ();
+
if (after)
{
rtx seq;
emit_stack_save (SAVE_NONLOCAL, &r_save, NULL_RTX);
}
\f
-#ifdef SETJMP_VIA_SAVE_AREA
-/* Optimize RTL generated by allocate_dynamic_stack_space for targets
- where SETJMP_VIA_SAVE_AREA is true. The problem is that on these
- platforms, the dynamic stack space used can corrupt the original
- frame, thus causing a crash if a longjmp unwinds to it. */
-
-void
-optimize_save_area_alloca (void)
-{
- rtx insn;
-
- for (insn = get_insns (); insn; insn = NEXT_INSN(insn))
- {
- rtx note;
-
- if (!NONJUMP_INSN_P (insn))
- continue;
-
- for (note = REG_NOTES (insn); note; note = XEXP (note, 1))
- {
- if (REG_NOTE_KIND (note) != REG_SAVE_AREA)
- continue;
-
- if (!current_function_calls_setjmp)
- {
- rtx pat = PATTERN (insn);
-
- /* If we do not see the note in a pattern matching
- these precise characteristics, we did something
- entirely wrong in allocate_dynamic_stack_space.
-
- Note, one way this could happen is if SETJMP_VIA_SAVE_AREA
- was defined on a machine where stacks grow towards higher
- addresses.
-
- Right now only supported port with stack that grow upward
- is the HPPA and it does not define SETJMP_VIA_SAVE_AREA. */
- gcc_assert (GET_CODE (pat) == SET
- && SET_DEST (pat) == stack_pointer_rtx
- && GET_CODE (SET_SRC (pat)) == MINUS
- && XEXP (SET_SRC (pat), 0) == stack_pointer_rtx);
-
- /* This will now be transformed into a (set REG REG)
- so we can just blow away all the other notes. */
- XEXP (SET_SRC (pat), 1) = XEXP (note, 0);
- REG_NOTES (insn) = NULL_RTX;
- }
- else
- {
- /* setjmp was called, we must remove the REG_SAVE_AREA
- note so that later passes do not get confused by its
- presence. */
- if (note == REG_NOTES (insn))
- {
- REG_NOTES (insn) = XEXP (note, 1);
- }
- else
- {
- rtx srch;
-
- for (srch = REG_NOTES (insn); srch; srch = XEXP (srch, 1))
- if (XEXP (srch, 1) == note)
- break;
-
- gcc_assert (srch);
-
- XEXP (srch, 1) = XEXP (note, 1);
- }
- }
- /* Once we've seen the note of interest, we need not look at
- the rest of them. */
- break;
- }
- }
-}
-#endif /* SETJMP_VIA_SAVE_AREA */
-
/* Return an rtx representing the address of an area of memory dynamically
pushed on the stack. This region of memory is always aligned to
a multiple of BIGGEST_ALIGNMENT.
rtx
allocate_dynamic_stack_space (rtx size, rtx target, int known_align)
{
-#ifdef SETJMP_VIA_SAVE_AREA
- rtx setjmpless_size = NULL_RTX;
-#endif
-
/* If we're asking for zero bytes, it doesn't matter what we point
to since we can't dereference it. But return a reasonable
address anyway. */
return virtual_stack_dynamic_rtx;
/* Otherwise, show we're calling alloca or equivalent. */
- current_function_calls_alloca = 1;
+ cfun->calls_alloca = 1;
/* Ensure the size is in the proper mode. */
if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode)
/* We can't attempt to minimize alignment necessary, because we don't
know the final value of preferred_stack_boundary yet while executing
this code. */
- cfun->preferred_stack_boundary = PREFERRED_STACK_BOUNDARY;
+ crtl->preferred_stack_boundary = PREFERRED_STACK_BOUNDARY;
/* We will need to ensure that the address we return is aligned to
BIGGEST_ALIGNMENT. If STACK_DYNAMIC_OFFSET is defined, we don't
avoid clobbering the reg save area. Note that the offset of
virtual_incoming_args_rtx includes the preallocated stack args space.
It would be no problem to clobber that, but it's on the wrong side
- of the old save area. */
- {
- rtx dynamic_offset
- = expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx,
- stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ of the old save area.
+
+ What used to happen is that, since we did not know for sure
+ whether setjmp() was invoked until after RTL generation, we
+ would use reg notes to store the "optimized" size and fix things
+ up later. These days we know this information before we ever
+ start building RTL so the reg notes are unnecessary. */
+ if (!cfun->calls_setjmp)
+ {
+ int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
- if (!current_function_calls_setjmp)
- {
- int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
-
- /* See optimize_save_area_alloca to understand what is being
- set up here. */
-
- /* ??? Code below assumes that the save area needs maximal
- alignment. This constraint may be too strong. */
- gcc_assert (PREFERRED_STACK_BOUNDARY == BIGGEST_ALIGNMENT);
-
- if (GET_CODE (size) == CONST_INT)
- {
- HOST_WIDE_INT new = INTVAL (size) / align * align;
-
- if (INTVAL (size) != new)
- setjmpless_size = GEN_INT (new);
- else
- setjmpless_size = size;
- }
- else
- {
- /* Since we know overflow is not possible, we avoid using
- CEIL_DIV_EXPR and use TRUNC_DIV_EXPR instead. */
- setjmpless_size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size,
- GEN_INT (align), NULL_RTX, 1);
- setjmpless_size = expand_mult (Pmode, setjmpless_size,
- GEN_INT (align), NULL_RTX, 1);
- }
- /* Our optimization works based upon being able to perform a simple
- transformation of this RTL into a (set REG REG) so make sure things
- did in fact end up in a REG. */
- if (!register_operand (setjmpless_size, Pmode))
- setjmpless_size = force_reg (Pmode, setjmpless_size);
- }
+ /* ??? Code below assumes that the save area needs maximal
+ alignment. This constraint may be too strong. */
+ gcc_assert (PREFERRED_STACK_BOUNDARY == BIGGEST_ALIGNMENT);
- size = expand_binop (Pmode, add_optab, size, dynamic_offset,
- NULL_RTX, 1, OPTAB_LIB_WIDEN);
- }
+ if (GET_CODE (size) == CONST_INT)
+ {
+ HOST_WIDE_INT new = INTVAL (size) / align * align;
+
+ if (INTVAL (size) != new)
+ size = GEN_INT (new);
+ }
+ else
+ {
+ /* Since we know overflow is not possible, we avoid using
+ CEIL_DIV_EXPR and use TRUNC_DIV_EXPR instead. */
+ size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size,
+ GEN_INT (align), NULL_RTX, 1);
+ size = expand_mult (Pmode, size,
+ GEN_INT (align), NULL_RTX, 1);
+ }
+ }
+ else
+ {
+ rtx dynamic_offset
+ = expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx,
+ stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN);
+
+ size = expand_binop (Pmode, add_optab, size, dynamic_offset,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
#endif /* SETJMP_VIA_SAVE_AREA */
/* Round the size to a multiple of the required stack alignment.
#endif
/* Check stack bounds if necessary. */
- if (current_function_limit_stack)
+ if (crtl->limit_stack)
{
rtx available;
rtx space_available = gen_label_rtx ();
}
anti_adjust_stack (size);
-#ifdef SETJMP_VIA_SAVE_AREA
- if (setjmpless_size != NULL_RTX)
- {
- rtx note_target = get_last_insn ();
-
- REG_NOTES (note_target)
- = gen_rtx_EXPR_LIST (REG_SAVE_AREA, setjmpless_size,
- REG_NOTES (note_target));
- }
-#endif /* SETJMP_VIA_SAVE_AREA */
#ifdef STACK_GROWS_DOWNWARD
emit_move_insn (target, virtual_stack_dynamic_rtx);
/* Return an rtx representing the register or memory location
in which a scalar value of data type VALTYPE
was returned by a function call to function FUNC.
- FUNC is a FUNCTION_DECL node if the precise function is known,
- otherwise 0.
+ FUNC is a FUNCTION_DECL, FNTYPE a FUNCTION_TYPE node if the precise
+ function is known, otherwise 0.
OUTGOING is 1 if on a machine with register windows this function
should return the register in which the function will put its result
and 0 otherwise. */
rtx
-hard_function_value (tree valtype, tree func ATTRIBUTE_UNUSED,
+hard_function_value (const_tree valtype, const_tree func, const_tree fntype,
int outgoing ATTRIBUTE_UNUSED)
{
rtx val;
-#ifdef FUNCTION_OUTGOING_VALUE
- if (outgoing)
- val = FUNCTION_OUTGOING_VALUE (valtype, func);
- else
-#endif
- val = FUNCTION_VALUE (valtype, func);
+ val = targetm.calls.function_value (valtype, func ? func : fntype, outgoing);
if (REG_P (val)
&& GET_MODE (val) == BLKmode)
enum machine_mode tmpmode;
/* int_size_in_bytes can return -1. We don't need a check here
- since the value of bytes will be large enough that no mode
- will match and we will abort later in this function. */
+ since the value of bytes will then be large enough that no
+ mode will match anyway. */
for (tmpmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
tmpmode != VOIDmode;