-Wno-attributes -Wno-builtin-macro-redefined @gol
-Wc++-compat -Wc++0x-compat -Wcast-align -Wcast-qual @gol
-Wchar-subscripts -Wclobbered -Wcomment @gol
--Wconversion -Wcoverage-mismatch -Wcpp -Wno-deprecated @gol
+-Wconversion -Wcoverage-mismatch -Wno-cpp -Wno-deprecated @gol
-Wno-deprecated-declarations -Wdisabled-optimization @gol
-Wno-div-by-zero -Wdouble-promotion -Wempty-body -Wenum-compare @gol
-Wno-endif-labels -Werror -Werror=* @gol
-fcompare-debug@r{[}=@var{opts}@r{]} -fcompare-debug-second @gol
-feliminate-dwarf2-dups -feliminate-unused-debug-types @gol
-feliminate-unused-debug-symbols -femit-class-debug-always @gol
+-fdebug-types-section @gol
-fmem-report -fpre-ipa-mem-report -fpost-ipa-mem-report -fprofile-arcs @gol
-frandom-seed=@var{string} -fsched-verbose=@var{n} @gol
-fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose @gol
-finline-functions -finline-functions-called-once -finline-limit=@var{n} @gol
-finline-small-functions -fipa-cp -fipa-cp-clone -fipa-matrix-reorg @gol
-fipa-pta -fipa-profile -fipa-pure-const -fipa-reference @gol
--fipa-struct-reorg -fira-algorithm=@var{algorithm} @gol
+-fira-algorithm=@var{algorithm} @gol
-fira-region=@var{region} @gol
-fira-loop-pressure -fno-ira-share-save-slots @gol
-fno-ira-share-spill-slots -fira-verbose=@var{n} @gol
-mapcs-reentrant -mno-apcs-reentrant @gol
-msched-prolog -mno-sched-prolog @gol
-mlittle-endian -mbig-endian -mwords-little-endian @gol
--mfloat-abi=@var{name} -msoft-float -mhard-float -mfpe @gol
+-mfloat-abi=@var{name} -mfpe @gol
-mfp16-format=@var{name}
-mthumb-interwork -mno-thumb-interwork @gol
-mcpu=@var{name} -march=@var{name} -mfpu=@var{name} @gol
-momit-leaf-frame-pointer -mno-red-zone -mno-tls-direct-seg-refs @gol
-mcmodel=@var{code-model} -mabi=@var{name} @gol
-m32 -m64 -mlarge-data-threshold=@var{num} @gol
--msse2avx -mfentry -m8bit-idiv}
+-msse2avx -mfentry -m8bit-idiv @gol
+-mavx256-split-unaligned-load -mavx256-split-unaligned-store}
+
+@emph{i386 and x86-64 Windows Options}
+@gccoptlist{-mconsole -mcygwin -mno-cygwin -mdll @gol
+-mnop-fun-dllimport -mthread @gol
+-municode -mwin32 -mwindows -fno-set-stack-executable}
@emph{IA-64 Options}
@gccoptlist{-mbig-endian -mlittle-endian -mgnu-as -mgnu-ld -mno-pic @gol
@emph{x86-64 Options}
See i386 and x86-64 Options.
-@emph{i386 and x86-64 Windows Options}
-@gccoptlist{-mconsole -mcygwin -mno-cygwin -mdll @gol
--mnop-fun-dllimport -mthread @gol
--municode -mwin32 -mwindows -fno-set-stack-executable}
-
@emph{Xstormy16 Options}
@gccoptlist{-msim}
comment, or whenever a Backslash-Newline appears in a @samp{//} comment.
This warning is enabled by @option{-Wall}.
-@item -Wno-cpp \
+@item -Wno-cpp
@r{(C, Objective-C, C++, Objective-C++ and Fortran only)}
Suppress warning messages emitted by @code{#warning} directives.
option will increase the size of debugging information by as much as a
factor of two.
+@item -fno-debug-types-section
+@opindex fno-debug-types-section
+@opindex fdebug-types-section
+By default when using DWARF v4 or higher type DIEs will be put into
+their own .debug_types section instead of making them part of the
+.debug_info section. It is more efficient to put them in a separate
+comdat sections since the linker will then be able to remove duplicates.
+But not all DWARF consumers support .debug_types sections yet.
+
@item -gstabs+
@opindex gstabs+
Produce debugging information in stabs format (if that is supported),
compilation unit.
Enabled by default at @option{-O} and higher.
-@item -fipa-struct-reorg
-@opindex fipa-struct-reorg
-Perform structure reorganization optimization, that change C-like structures
-layout in order to better utilize spatial locality. This transformation is
-affective for programs containing arrays of structures. Available in two
-compilation modes: profile-based (enabled with @option{-fprofile-generate})
-or static (which uses built-in heuristics). It works only in whole program
-mode, so it requires @option{-fwhole-program} to be
-enabled. Structures considered @samp{cold} by this transformation are not
-affected (see @option{--param struct-reorg-cold-struct-ratio=@var{value}}).
-
-With this flag, the program debug info reflects a new structure layout.
-
@item -fipa-pta
@opindex fipa-pta
Perform interprocedural pointer analysis and interprocedural modification
This option enables the extraction of object files with GIMPLE bytecode out of
library archives. This improves the quality of optimization by exposing more
-code the the link time optimizer. This information specify what symbols
+code the link time optimizer. This information specify what symbols
can be accessed externally (by non-LTO object or during dynamic linking).
Resulting code quality improvements on binaries (and shared libraries that do
use hidden visibility) is similar to @code{-fwhole-program}. See
@var{name} are given in the following table:
@table @gcctabopt
-@item struct-reorg-cold-struct-ratio
-The threshold ratio (as a percentage) between a structure frequency
-and the frequency of the hottest structure in the program. This parameter
-is used by struct-reorg optimization enabled by @option{-fipa-struct-reorg}.
-We say that if the ratio of a structure frequency, calculated by profiling,
-to the hottest structure frequency in the program is less than this
-parameter, then structure reorganization is not applied to this structure.
-The default is 10.
-
@item predictable-branch-outcome
When branch is predicted to be taken with probability lower than this threshold
(in percent), then it is considered well predictable. The default is 10.
The maximum number of namespaces to consult for suggestions when C++
name lookup fails for an identifier. The default is 1000.
+@item max-stores-to-sink
+The maximum number of conditional stores paires that can be sunk. Set to 0
+if either vectorization (@option{-ftree-vectorize}) or if-conversion
+(@option{-ftree-loop-if-convert}) is disabled. The default is 2.
+
@end table
@end table
string. All lines after this directive up to the next directive or
blank line are considered to be the text for the spec string. If this
results in an empty string then the spec will be deleted. (Or, if the
-spec did not exist, then nothing will happened.) Otherwise, if the spec
+spec did not exist, then nothing will happen.) Otherwise, if the spec
does not currently exist a new spec will be created. If the spec does
exist then its contents will be overridden by the text of this
directive, unless the first character of that text is the @samp{+}
compile your entire program with the same ABI, and link with a
compatible set of libraries.
-@item -mhard-float
-@opindex mhard-float
-Equivalent to @option{-mfloat-abi=hard}.
-
-@item -msoft-float
-@opindex msoft-float
-Equivalent to @option{-mfloat-abi=soft}.
-
@item -mlittle-endian
@opindex mlittle-endian
Generate code for a processor running in little-endian mode. This is
to 255, 8bit unsigned integer divide will be used instead of
32bit/64bit integer divide.
+@item -mavx256-split-unaligned-load
+@item -mavx256-split-unaligned-store
+@opindex avx256-split-unaligned-load
+@opindex avx256-split-unaligned-store
+Split 32-byte AVX unaligned load and store.
+
@end table
These @samp{-m} switches are supported in addition to the above
about addresses and sizes of sections.
@end table
+@node i386 and x86-64 Windows Options
+@subsection i386 and x86-64 Windows Options
+@cindex i386 and x86-64 Windows Options
+
+These additional options are available for Windows targets:
+
+@table @gcctabopt
+@item -mconsole
+@opindex mconsole
+This option is available for Cygwin and MinGW targets. It
+specifies that a console application is to be generated, by
+instructing the linker to set the PE header subsystem type
+required for console applications.
+This is the default behavior for Cygwin and MinGW targets.
+
+@item -mdll
+@opindex mdll
+This option is available for Cygwin and MinGW targets. It
+specifies that a DLL - a dynamic link library - is to be
+generated, enabling the selection of the required runtime
+startup object and entry point.
+
+@item -mnop-fun-dllimport
+@opindex mnop-fun-dllimport
+This option is available for Cygwin and MinGW targets. It
+specifies that the dllimport attribute should be ignored.
+
+@item -mthread
+@opindex mthread
+This option is available for MinGW targets. It specifies
+that MinGW-specific thread support is to be used.
+
+@item -municode
+@opindex municode
+This option is available for mingw-w64 targets. It specifies
+that the UNICODE macro is getting pre-defined and that the
+unicode capable runtime startup code is chosen.
+
+@item -mwin32
+@opindex mwin32
+This option is available for Cygwin and MinGW targets. It
+specifies that the typical Windows pre-defined macros are to
+be set in the pre-processor, but does not influence the choice
+of runtime library/startup code.
+
+@item -mwindows
+@opindex mwindows
+This option is available for Cygwin and MinGW targets. It
+specifies that a GUI application is to be generated by
+instructing the linker to set the PE header subsystem type
+appropriately.
+
+@item -fno-set-stack-executable
+@opindex fno-set-stack-executable
+This option is available for MinGW targets. It specifies that
+the executable flag for stack used by nested functions isn't
+set. This is necessary for binaries running in kernel mode of
+Windows, as there the user32 API, which is used to set executable
+privileges, isn't available.
+
+@item -mpe-aligned-commons
+@opindex mpe-aligned-commons
+This option is available for Cygwin and MinGW targets. It
+specifies that the GNU extension to the PE file format that
+permits the correct alignment of COMMON variables should be
+used when generating code. It will be enabled by default if
+GCC detects that the target assembler found during configuration
+supports the feature.
+@end table
+
+See also under @ref{i386 and x86-64 Options} for standard options.
+
@node IA-64 Options
@subsection IA-64 Options
@cindex IA-64 Options
These are listed under @xref{i386 and x86-64 Options}.
-@node i386 and x86-64 Windows Options
-@subsection i386 and x86-64 Windows Options
-@cindex i386 and x86-64 Windows Options
-
-These additional options are available for Windows targets:
-
-@table @gcctabopt
-@item -mconsole
-@opindex mconsole
-This option is available for Cygwin and MinGW targets. It
-specifies that a console application is to be generated, by
-instructing the linker to set the PE header subsystem type
-required for console applications.
-This is the default behavior for Cygwin and MinGW targets.
-
-@item -mdll
-@opindex mdll
-This option is available for Cygwin and MinGW targets. It
-specifies that a DLL - a dynamic link library - is to be
-generated, enabling the selection of the required runtime
-startup object and entry point.
-
-@item -mnop-fun-dllimport
-@opindex mnop-fun-dllimport
-This option is available for Cygwin and MinGW targets. It
-specifies that the dllimport attribute should be ignored.
-
-@item -mthread
-@opindex mthread
-This option is available for MinGW targets. It specifies
-that MinGW-specific thread support is to be used.
-
-@item -municode
-@opindex municode
-This option is available for mingw-w64 targets. It specifies
-that the UNICODE macro is getting pre-defined and that the
-unicode capable runtime startup code is chosen.
-
-@item -mwin32
-@opindex mwin32
-This option is available for Cygwin and MinGW targets. It
-specifies that the typical Windows pre-defined macros are to
-be set in the pre-processor, but does not influence the choice
-of runtime library/startup code.
-
-@item -mwindows
-@opindex mwindows
-This option is available for Cygwin and MinGW targets. It
-specifies that a GUI application is to be generated by
-instructing the linker to set the PE header subsystem type
-appropriately.
-
-@item -fno-set-stack-executable
-@opindex fno-set-stack-executable
-This option is available for MinGW targets. It specifies that
-the executable flag for stack used by nested functions isn't
-set. This is necessary for binaries running in kernel mode of
-Windows, as there the user32 API, which is used to set executable
-privileges, isn't available.
-
-@item -mpe-aligned-commons
-@opindex mpe-aligned-commons
-This option is available for Cygwin and MinGW targets. It
-specifies that the GNU extension to the PE file format that
-permits the correct alignment of COMMON variables should be
-used when generating code. It will be enabled by default if
-GCC detects that the target assembler found during configuration
-supports the feature.
-@end table
-
-See also under @ref{i386 and x86-64 Options} for standard options.
-
@node Xstormy16 Options
@subsection Xstormy16 Options
@cindex Xstormy16 Options
OSDN Git Service
