-feliminate-dwarf2-dups -feliminate-unused-debug-types @gol
-feliminate-unused-debug-symbols -fmem-report -fprofile-arcs @gol
-frandom-seed=@var{string} -fsched-verbose=@var{n} @gol
--ftest-coverage -ftime-report @gol
+-ftest-coverage -ftime-report -fvar-tracking @gol
-g -g@var{level} -gcoff -gdwarf-2 @gol
-ggdb -gstabs -gstabs+ -gvms -gxcoff -gxcoff+ @gol
-p -pg -print-file-name=@var{library} -print-libgcc-file-name @gol
-msched-prolog -mno-sched-prolog @gol
-mlittle-endian -mbig-endian -mwords-little-endian @gol
-malignment-traps -mno-alignment-traps @gol
--msoft-float -mhard-float -mfpe @gol
+-mfloat-abi=@var{name} soft-float -mhard-float -mfpe @gol
-mthumb-interwork -mno-thumb-interwork @gol
--mcpu=@var{name} -march=@var{name} -mfpe=@var{name} @gol
+-mcpu=@var{name} -march=@var{name} -mfpu=@var{name} @gol
-mstructure-size-boundary=@var{n} @gol
-mabort-on-noreturn @gol
-mlong-calls -mno-long-calls @gol
-mschedule=@var{cpu-type} -mspace-regs -msio -mwsio @gol
-nolibdld -static -threads}
-@emph{Intel 960 Options}
-@gccoptlist{-m@var{cpu-type} -masm-compat -mclean-linkage @gol
--mcode-align -mcomplex-addr -mleaf-procedures @gol
--mic-compat -mic2.0-compat -mic3.0-compat @gol
--mintel-asm -mno-clean-linkage -mno-code-align @gol
--mno-complex-addr -mno-leaf-procedures @gol
--mno-old-align -mno-strict-align -mno-tail-call @gol
--mnumerics -mold-align -msoft-float -mstrict-align @gol
--mtail-call}
-
@emph{DEC Alpha Options}
@gccoptlist{-mno-fp-regs -msoft-float -malpha-as -mgas @gol
-mieee -mieee-with-inexact -mieee-conformant @gol
-minline-int-divide-max-throughput -mno-dwarf2-asm @gol
-mfixed-range=@var{register-range}}
-@emph{D30V Options}
-@gccoptlist{-mextmem -mextmemory -monchip -mno-asm-optimize @gol
--masm-optimize -mbranch-cost=@var{n} -mcond-exec=@var{n}}
-
@emph{S/390 and zSeries Options}
@gccoptlist{-mtune=@var{cpu-type} -march=@var{cpu-type} @gol
-mhard-float -msoft-float -mbackchain -mno-backchain @gol
Therefore, the ABI obtained using version 0 will change as ABI bugs
are fixed.
-The default is version 1.
+The default is version 2.
@item -fno-access-control
@opindex fno-access-control
@item V
@opindex dV
Dump after the value profile transformations, to @file{@var{file}.13.vpt}.
+Also dump after variable tracking, to @file{@var{file}.35.vartrack}.
@item w
@opindex dw
Dump after the second flow pass, to @file{@var{file}.27.flow2}.
time spent executing operating system routines on behalf of the program.
Both numbers are in seconds.
+@item -fvar-tracking
+@opindex fvar-tracking
+Run variable tracking pass. It computes where variables are stored at each
+position in code. Better debugging information is then generated
+(if the debugging information format supports this information).
+
+It is enabled by default when compiling with optimization (@option{-Os},
+@option{-O}, @option{-O2}, ...), debugging information (@option{-g}) and
+the debug info format supports it.
+
@item -print-file-name=@var{library}
@opindex print-file-name
Print the full absolute name of the library file @var{library} that
* MIPS Options::
* i386 and x86-64 Options::
* HPPA Options::
-* Intel 960 Options::
* DEC Alpha Options::
* DEC Alpha/VMS Options::
* H8/300 Options::
* AVR Options::
* MCore Options::
* IA-64 Options::
-* D30V Options::
* S/390 and zSeries Options::
* CRIS Options::
* MMIX Options::
library that comes with GCC, with @option{-msoft-float} in order for
this to work.
+@item -mfloat-abi=@var{name}
+@opindex mfloat-abi
+Specifies which ABI to use for floating point values. Permissible values
+are: @samp{soft}, @samp{softfp} and @samp{hard}.
+
+@samp{soft} and @samp{hard} are equivalent to @option{-msoft-float}
+and @option{-mhard-float} respectively. @samp{softfp} allows the generation
+of floating point instructions, but still uses the soft-float calling
+conventions.
+
@item -mlittle-endian
@opindex mlittle-endian
Generate code for a processor running in little-endian mode. This is
assembly code. This option can be used in conjunction with or instead
of the @option{-mcpu=} option. Permissible names are: @samp{armv2},
@samp{armv2a}, @samp{armv3}, @samp{armv3m}, @samp{armv4}, @samp{armv4t},
-@samp{armv5}, @samp{armv5t}, @samp{armv5te}, @samp{armv6j},
+@samp{armv5}, @samp{armv5t}, @samp{armv5te}, @samp{armv6}, @samp{armv6j},
@samp{iwmmxt}, @samp{ep9312}.
-@item -mfpe=@var{number}
+@item -mfpu=@var{name}
+@itemx -mfpe=@var{number}
@itemx -mfp=@var{number}
+@opindex mfpu
@opindex mfpe
@opindex mfp
-This specifies the version of the floating point emulation available on
-the target. Permissible values are 2 and 3. @option{-mfp=} is a synonym
-for @option{-mfpe=}, for compatibility with older versions of GCC@.
+This specifies what floating point hardware (or hardware emulation) is
+available on the target. Permissible names are: @samp{fpa}, @samp{fpe2},
+@samp{fpe3}, @samp{maverick}, @samp{vfp}. @option{-mfp} and @option{-mfpe}
+are synonyms for @option{-mpfu}=@samp{fpe}@var{number}, for compatibility
+with older versions of GCC@.
+
+If @option{-msoft-float} is specified this specifies the format of
+floating point values.
@item -mstructure-size-boundary=@var{n}
@opindex mstructure-size-boundary
@item -mfpmath=@var{unit}
@opindex march
-generate floating point arithmetics for selected unit @var{unit}. the choices
+Generate floating point arithmetics for selected unit @var{unit}. The choices
for @var{unit} are:
@table @samp
@option{-msse2} switches to enable SSE extensions and make this option
effective. For x86-64 compiler, these extensions are enabled by default.
-The resulting code should be considerably faster in majority of cases and avoid
+The resulting code should be considerably faster in the majority of cases and avoid
the numerical instability problems of 387 code, but may break some existing
code that expects temporaries to be 80bit.
-This is the default choice for x86-64 compiler.
-
-@item pni
-Use all SSE extensions enabled by @option{-msse2} as well as the new
-SSE extensions in Prescott New Instructions. @option{-mpni} also
-enables 2 builtin functions, @code{__builtin_ia32_monitor} and
-@code{__builtin_ia32_mwait}, for new instructions @code{monitor} and
-@code{mwait}.
+This is the default choice for the x86-64 compiler.
@item sse,387
Attempt to utilize both instruction sets at once. This effectively double the
amount of available registers and on chips with separate execution units for
387 and SSE the execution resources too. Use this option with care, as it is
-still experimental, because gcc register allocator does not model separate
+still experimental, because the gcc register allocator does not model separate
functional units well resulting in instable performance.
@end table
standard of 80 bits for a @code{long double}.
@strong{Warning:} if you override the default value for your target ABI, the
-structures and arrays containing @code{long double} will change their size as
-well as function calling convention for function taking @code{long double}
-will be modified. Hence they will not be binary compatible with arrays or
-structures in code compiled without that switch.
+structures and arrays containing @code{long double} variables will change
+their size as well as function calling convention for function taking
+@code{long double} will be modified. Hence they will not be binary
+compatible with arrays or structures in code compiled without that switch.
@item -msvr3-shlib
@opindex m3dnow
@opindex mno-3dnow
These switches enable or disable the use of built-in functions that allow
-direct access to the MMX, SSE and 3Dnow extensions of the instruction set.
+direct access to the MMX, SSE, SSE2, PNI and 3Dnow extensions of the
+instruction set.
@xref{X86 Built-in Functions}, for details of the functions enabled
and disabled by these switches.
linker.
@end table
-@node Intel 960 Options
-@subsection Intel 960 Options
-
-These @samp{-m} options are defined for the Intel 960 implementations:
-
-@table @gcctabopt
-@item -m@var{cpu-type}
-@opindex mka
-@opindex mkb
-@opindex mmc
-@opindex mca
-@opindex mcf
-@opindex msa
-@opindex msb
-Assume the defaults for the machine type @var{cpu-type} for some of
-the other options, including instruction scheduling, floating point
-support, and addressing modes. The choices for @var{cpu-type} are
-@samp{ka}, @samp{kb}, @samp{mc}, @samp{ca}, @samp{cf},
-@samp{sa}, and @samp{sb}.
-The default is
-@samp{kb}.
-
-@item -mnumerics
-@itemx -msoft-float
-@opindex mnumerics
-@opindex msoft-float
-The @option{-mnumerics} option indicates that the processor does support
-floating-point instructions. The @option{-msoft-float} option indicates
-that floating-point support should not be assumed.
-
-@item -mleaf-procedures
-@itemx -mno-leaf-procedures
-@opindex mleaf-procedures
-@opindex mno-leaf-procedures
-Do (or do not) attempt to alter leaf procedures to be callable with the
-@code{bal} instruction as well as @code{call}. This will result in more
-efficient code for explicit calls when the @code{bal} instruction can be
-substituted by the assembler or linker, but less efficient code in other
-cases, such as calls via function pointers, or using a linker that doesn't
-support this optimization.
-
-@item -mtail-call
-@itemx -mno-tail-call
-@opindex mtail-call
-@opindex mno-tail-call
-Do (or do not) make additional attempts (beyond those of the
-machine-independent portions of the compiler) to optimize tail-recursive
-calls into branches. You may not want to do this because the detection of
-cases where this is not valid is not totally complete. The default is
-@option{-mno-tail-call}.
-
-@item -mcomplex-addr
-@itemx -mno-complex-addr
-@opindex mcomplex-addr
-@opindex mno-complex-addr
-Assume (or do not assume) that the use of a complex addressing mode is a
-win on this implementation of the i960. Complex addressing modes may not
-be worthwhile on the K-series, but they definitely are on the C-series.
-The default is currently @option{-mcomplex-addr} for all processors except
-the CB and CC@.
-
-@item -mcode-align
-@itemx -mno-code-align
-@opindex mcode-align
-@opindex mno-code-align
-Align code to 8-byte boundaries for faster fetching (or don't bother).
-Currently turned on by default for C-series implementations only.
-
-@ignore
-@item -mclean-linkage
-@itemx -mno-clean-linkage
-@opindex mclean-linkage
-@opindex mno-clean-linkage
-These options are not fully implemented.
-@end ignore
-
-@item -mic-compat
-@itemx -mic2.0-compat
-@itemx -mic3.0-compat
-@opindex mic-compat
-@opindex mic2.0-compat
-@opindex mic3.0-compat
-Enable compatibility with iC960 v2.0 or v3.0.
-
-@item -masm-compat
-@itemx -mintel-asm
-@opindex masm-compat
-@opindex mintel-asm
-Enable compatibility with the iC960 assembler.
-
-@item -mstrict-align
-@itemx -mno-strict-align
-@opindex mstrict-align
-@opindex mno-strict-align
-Do not permit (do permit) unaligned accesses.
-
-@item -mold-align
-@opindex mold-align
-Enable structure-alignment compatibility with Intel's gcc release version
-1.3 (based on gcc 1.37). This option implies @option{-mstrict-align}.
-
-@item -mlong-double-64
-@opindex mlong-double-64
-Implement type @samp{long double} as 64-bit floating point numbers.
-Without the option @samp{long double} is implemented by 80-bit
-floating point numbers. The only reason we have it because there is
-no 128-bit @samp{long double} support in @samp{fp-bit.c} yet. So it
-is only useful for people using soft-float targets. Otherwise, we
-should recommend against use of it.
-
-@end table
-
@node DEC Alpha Options
@subsection DEC Alpha Options
scheduling, but does not always do so.
@end table
-@node D30V Options
-@subsection D30V Options
-@cindex D30V Options
-
-These @samp{-m} options are defined for D30V implementations:
-
-@table @gcctabopt
-@item -mextmem
-@opindex mextmem
-Link the @samp{.text}, @samp{.data}, @samp{.bss}, @samp{.strings},
-@samp{.rodata}, @samp{.rodata1}, @samp{.data1} sections into external
-memory, which starts at location @code{0x80000000}.
-
-@item -mextmemory
-@opindex mextmemory
-Same as the @option{-mextmem} switch.
-
-@item -monchip
-@opindex monchip
-Link the @samp{.text} section into onchip text memory, which starts at
-location @code{0x0}. Also link @samp{.data}, @samp{.bss},
-@samp{.strings}, @samp{.rodata}, @samp{.rodata1}, @samp{.data1} sections
-into onchip data memory, which starts at location @code{0x20000000}.
-
-@item -mno-asm-optimize
-@itemx -masm-optimize
-@opindex mno-asm-optimize
-@opindex masm-optimize
-Disable (enable) passing @option{-O} to the assembler when optimizing.
-The assembler uses the @option{-O} option to automatically parallelize
-adjacent short instructions where possible.
-
-@item -mbranch-cost=@var{n}
-@opindex mbranch-cost
-Increase the internal costs of branches to @var{n}. Higher costs means
-that the compiler will issue more instructions to avoid doing a branch.
-The default is 2.
-
-@item -mcond-exec=@var{n}
-@opindex mcond-exec
-Specify the maximum number of conditionally executed instructions that
-replace a branch. The default is 4.
-@end table
-
@node S/390 and zSeries Options
@subsection S/390 and zSeries Options
@cindex S/390 and zSeries Options
OSDN Git Service
