@heading Tools/packages necessary for modifying GCC
@table @asis
-@item autoconf version 2.59
-@itemx GNU m4 version 1.4 (or later)
+@item autoconf version 2.64
+@itemx GNU m4 version 1.4.6 (or later)
Necessary when modifying @file{configure.ac}, @file{aclocal.m4}, etc.@:
to regenerate @file{configure} and @file{config.in} files.
-@item automake version 1.9.6
+@item automake version 1.11
Necessary when modifying a @file{Makefile.am} file to regenerate its
associated @file{Makefile.in}.
as any of their subdirectories.
For directories that use automake, GCC requires the latest release in
-the 1.9.x series, which is currently 1.9.6. When regenerating a directory
-to a newer version, please update all the directories using an older 1.9.x
+the 1.11 series, which is currently 1.11. When regenerating a directory
+to a newer version, please update all the directories using an older 1.11
to the latest released version.
@item gettext version 0.14.5 (or later)
Specify the installation directory for the shared libgcc library. The
default is @file{@var{libdir}}.
+@item --datarootdir=@var{dirname}
+Specify the root of the directory tree for read-only architecture-independent
+data files referenced by GCC@. The default is @file{@var{prefix}/share}.
+
@item --infodir=@var{dirname}
Specify the installation directory for documentation in info format.
-The default is @file{@var{prefix}/info}.
+The default is @file{@var{datarootdir}/info}.
@item --datadir=@var{dirname}
Specify the installation directory for some architecture-independent
-data files referenced by GCC@. The default is @file{@var{prefix}/share}.
+data files referenced by GCC@. The default is @file{@var{datarootdir}}.
+
+@item --docdir=@var{dirname}
+Specify the installation directory for documentation files (other
+than Info) for GCC@. The default is @file{@var{datarootdir}/doc}.
+
+@item --htmldir=@var{dirname}
+Specify the installation directory for HTML documentation files.
+The default is @file{@var{docdir}}.
+
+@item --pdfdir=@var{dirname}
+Specify the installation directory for PDF documentation files.
+The default is @file{@var{docdir}}.
@item --mandir=@var{dirname}
Specify the installation directory for manual pages. The default is
-@file{@var{prefix}/man}. (Note that the manual pages are only extracts from
-the full GCC manuals, which are provided in Texinfo format. The manpages
+@file{@var{datarootdir}/man}. (Note that the manual pages are only extracts
+from the full GCC manuals, which are provided in Texinfo format. The manpages
are derived by an automatic conversion process from parts of the full
manual.)
On MIPS targets, make @option{-mno-llsc} the default when no
@option{-mllsc} option is passed.
+@item --with-synci
+On MIPS targets, make @option{-msynci} the default when no
+@option{-mno-synci} option is passed.
+
+@item --without-synci
+On MIPS targets, make @option{-mno-synci} the default when no
+@option{-msynci} option is passed. This is the default.
+
@item --with-mips-plt
On MIPS targets, make use of copy relocations and PLTs.
These features are extensions to the traditional
support @option{--build-id} option, a warning is issued and the
@option{--enable-linker-build-id} option is ignored. The default is off.
+@item --enable-gnu-unique-object
+@itemx --disable-gnu-unique-object
+Tells GCC to use the gnu_unique_object relocation for C++ template
+static data members and inline function local statics. Enabled by
+default for a native toolchain with an assembler that accepts it and
+GLIBC 2.11 or above, otherwise disabled.
+
@end table
@subheading Cross-Compiler-Specific Options
@code{powerpc64-unknown-linux-gnu} host. In this case, pass
@option{--enable-bootstrap} to the configure script.
-@code{BUILD_CONFIG} can be used to bring in additional customization to
-the build. It can be set to a whitespace-separated list of names. For
-each such @code{NAME}, top-level @file{config/@code{NAME}.mk} will be
-included by the top-level @file{Makefile}, bringing in any settings it
-contains. Some examples are:
+@code{BUILD_CONFIG} can be used to bring in additional customization
+to the build. It can be set to a whitespace-separated list of names.
+For each such @code{NAME}, top-level @file{config/@code{NAME}.mk} will
+be included by the top-level @file{Makefile}, bringing in any settings
+it contains. The default @code{BUILD_CONFIG} can be set using the
+configure option @option{--with-build-config=@code{NAME}...}. Some
+examples of supported build configurations are:
@table @asis
@item @samp{bootstrap-O1}
Analogous to @code{bootstrap-O1}.
@item @samp{bootstrap-debug}
-Builds stage2 without debug information, and uses
-@file{contrib/compare-debug} to compare object files.
+Verifies that the compiler generates the same executable code, whether
+or not it is asked to emit debug information. To this end, this
+option builds stage2 host programs without debug information, and uses
+@file{contrib/compare-debug} to compare them with the stripped stage3
+object files. If @code{BOOT_CFLAGS} is overridden so as to not enable
+debug information, stage2 will have it, and stage3 won't. This option
+is enabled by default when GCC bootstrapping is enabled, if
+@code{strip} can turn object files compiled with and without debug
+info into identical object files. In addition to better test
+coverage, this option makes default bootstraps faster and leaner.
+
+@item @samp{bootstrap-debug-big}
+Rather than comparing stripped object files, as in
+@code{bootstrap-debug}, this option saves internal compiler dumps
+during stage2 and stage3 and compares them as well, which helps catch
+additional potential problems, but at a great cost in terms of disk
+space. It can be specified in addition to @samp{bootstrap-debug}.
+
+@item @samp{bootstrap-debug-lean}
+This option saves disk space compared with @code{bootstrap-debug-big},
+but at the expense of some recompilation. Instead of saving the dumps
+of stage2 and stage3 until the final compare, it uses
+@option{-fcompare-debug} to generate, compare and remove the dumps
+during stage3, repeating the compilation that already took place in
+stage2, whose dumps were not saved.
+
+@item @samp{bootstrap-debug-lib}
+This option tests executable code invariance over debug information
+generation on target libraries, just like @code{bootstrap-debug-lean}
+tests it on host programs. It builds stage3 libraries with
+@option{-fcompare-debug}, and it can be used along with any of the
+@code{bootstrap-debug} options above.
+
+There aren't @code{-lean} or @code{-big} counterparts to this option
+because most libraries are only build in stage3, so bootstrap compares
+would not get significant coverage. Moreover, the few libraries built
+in stage2 are used in stage3 host programs, so we wouldn't want to
+compile stage2 libraries with different options for comparison purposes.
+
+@item @samp{bootstrap-debug-ckovw}
+Arranges for error messages to be issued if the compiler built on any
+stage is run without the option @option{-fcompare-debug}. This is
+useful to verify the full @option{-fcompare-debug} testing coverage. It
+must be used along with @code{bootstrap-debug-lean} and
+@code{bootstrap-debug-lib}.
+
+@item @samp{bootstrap-time}
+Arranges for the run time of each program started by the GCC driver,
+built in any stage, to be logged to @file{time.log}, in the top level of
+the build tree.
@end table
@samp{make pdf} in place of @samp{make dvi}, you can create documentation
in the form of @file{.pdf} files; this requires @command{texi2pdf}, which
is included with Texinfo version 4.8 and later. You can also
-@uref{http://www.gnu.org/order/order.html,,buy printed manuals from the
+@uref{http://shop.fsf.org/,,buy printed manuals from the
Free Software Foundation}, though such manuals may not be for the most
recent version of GCC@.
@uref{http://pware.hvcc.edu,,Hudson Valley Community College Open Source Software for IBM System p};
@item
-@uref{http://www.perzl.org/aix,,AIX 5L and 6 Open Source Packages}.
+@uref{http://www.perzl.org/aix/,,AIX 5L and 6 Open Source Packages}.
@end itemize
@item
@item
@uref{http://www.nongnu.org/avr/,,http://www.nongnu.org/avr/}
@item
-@uref{http://home.overta.ru/users/denisc/,,http://home.overta.ru/users/denisc/}
-@item
@uref{http://www.amelek.gda.pl/avr/,,http://www.amelek.gda.pl/avr/}
@end itemize
@end html
@heading @anchor{x-x-freebsd}*-*-freebsd*
-The version of binutils installed in @file{/usr/bin} probably works with
-this release of GCC@. However, on FreeBSD 4, bootstrapping against the
-latest FSF binutils is known to improve overall testsuite results; and,
-on FreeBSD/alpha, using binutils 2.14 or later is required to build libjava.
-
-Support for FreeBSD 1 was discontinued in GCC 3.2.
-
-Support for FreeBSD 2 will be discontinued after GCC 3.4. The
-following was true for GCC 3.1 but the current status is unknown.
-For FreeBSD 2 or any mutant a.out versions of FreeBSD 3: All
-configuration support and files as shipped with GCC 2.95 are still in
-place. FreeBSD 2.2.7 has been known to bootstrap completely; however,
-it is unknown which version of binutils was used (it is assumed that it
-was the system copy in @file{/usr/bin}) and C++ EH failures were noted.
-
-For FreeBSD using the ELF file format: DWARF 2 debugging is now the
-default for all CPU architectures. It had been the default on
-FreeBSD/alpha since its inception. You may use @option{-gstabs} instead
-of @option{-g}, if you really want the old debugging format. There are
+Support for FreeBSD 1 was discontinued in GCC 3.2. Support for
+FreeBSD 2 (and any mutant a.out variants of FreeBSD 3) was
+discontinued in GCC 4.0.
+
+In GCC 4.5, we enabled the use of @code{dl_iterate_phdr} inside boehm-gc on
+FreeBSD 7 or later. In order to better match the configuration of the
+FreeBSD system compiler: We also enabled the check to see if libc
+provides SSP support (which it does on FreeBSD 7), the use of
+@code{dl_iterate_phdr} inside @file{libgcc_s.so.1} (on FreeBSD 7 or later)
+and the use of @code{__cxa_atexit} by default (on FreeBSD 6 or later).
+
+We support FreeBSD using the ELF file format with DWARF 2 debugging
+for all CPU architectures. You may use @option{-gstabs} instead of
+@option{-g}, if you really want the old debugging format. There are
no known issues with mixing object files and libraries with different
-debugging formats. Otherwise, this release of GCC should now match more
-of the configuration used in the stock FreeBSD configuration of GCC@. In
-particular, @option{--enable-threads} is now configured by default.
-However, as a general user, do not attempt to replace the system
-compiler with this release. Known to bootstrap and check with good
-results on FreeBSD 4.9-STABLE and 5-CURRENT@. In the past, known to
-bootstrap and check with good results on FreeBSD 3.0, 3.4, 4.0, 4.2,
-4.3, 4.4, 4.5, 4.8-STABLE@.
-
-In principle, @option{--enable-threads} is now compatible with
-@option{--enable-libgcj} on FreeBSD@. However, it has only been built
-and tested on @samp{i386-*-freebsd[45]} and @samp{alpha-*-freebsd[45]}.
-The static
-library may be incorrectly built (symbols are missing at link time).
-There is a rare timing-based startup hang (probably involves an
-assumption about the thread library). Multi-threaded boehm-gc (required for
-libjava) exposes severe threaded signal-handling bugs on FreeBSD before
-4.5-RELEASE@. Other CPU architectures
-supported by FreeBSD will require additional configuration tuning in, at
-the very least, both boehm-gc and libffi.
-
-Shared @file{libgcc_s.so} is now built and installed by default.
+debugging formats. Otherwise, this release of GCC should now match
+more of the configuration used in the stock FreeBSD configuration of
+GCC@. In particular, @option{--enable-threads} is now configured by
+default. However, as a general user, do not attempt to replace the
+system compiler with this release. Known to bootstrap and check with
+good results on FreeBSD 7.2-STABLE@. In the past, known to bootstrap
+and check with good results on FreeBSD 3.0, 3.4, 4.0, 4.2, 4.3, 4.4,
+4.5, 4.8, 4.9 and 5-CURRENT@.
+
+The version of binutils installed in @file{/usr/bin} probably works
+with this release of GCC@. Bootstrapping against the latest GNU
+binutils and/or the version found in @file{/usr/ports/devel/binutils} has
+been known to enable additional features and improve overall testsuite
+results. However, it is currently known that boehm-gc (which itself
+is required for java) may not configure properly on FreeBSD prior to
+the FreeBSD 7.0 release with GNU binutils after 2.16.1.
@html
<hr />
@html
<hr />
@end html
-@heading @anchor{os2}OS/2
-
-GCC does not currently support OS/2. However, Andrew Zabolotny has been
-working on a generic OS/2 port with pgcc. The current code can be found
-at @uref{http://www.goof.com/pcg/os2/,,http://www.goof.com/pcg/os2/}.
-
-@html
-<hr />
-@end html
@heading @anchor{older}Older systems
GCC contains support files for many older (1980s and early
OSDN Git Service
