/* Definitions of various defaults for tm.h macros.
- Copyright (C) 1992, 1996, 1997, 1998, 1999, 2000, 2001
+ Copyright (C) 1992, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Free Software Foundation, Inc.
Contributed by Ron Guilmette (rfg@monkeys.com)
#ifndef GCC_DEFAULTS_H
#define GCC_DEFAULTS_H
+#ifndef GET_ENVIRONMENT
+#define GET_ENVIRONMENT(VALUE, NAME) do { (VALUE) = getenv (NAME); } while (0)
+#endif
+
+#define obstack_chunk_alloc ((void *(*) (long)) xmalloc)
+#define obstack_chunk_free ((void (*) (void *)) free)
+#define OBSTACK_CHUNK_SIZE 0
+#define gcc_obstack_init(OBSTACK) \
+ _obstack_begin ((OBSTACK), OBSTACK_CHUNK_SIZE, 0, \
+ obstack_chunk_alloc, \
+ obstack_chunk_free)
+
/* Define default standard character escape sequences. */
#ifndef TARGET_BELL
# define TARGET_BELL 007
# define TARGET_ESC 033
#endif
-/* Store in OUTPUT a string (made with alloca) containing
- an assembler-name for a local static variable or function named NAME.
+/* Store in OUTPUT a string (made with alloca) containing an
+ assembler-name for a local static variable or function named NAME.
LABELNO is an integer which is different for each call. */
+#ifndef ASM_PN_FORMAT
+# ifndef NO_DOT_IN_LABEL
+# define ASM_PN_FORMAT "%s.%lu"
+# else
+# ifndef NO_DOLLAR_IN_LABEL
+# define ASM_PN_FORMAT "%s$%lu"
+# else
+# define ASM_PN_FORMAT "__%s_%lu"
+# endif
+# endif
+#endif /* ! ASM_PN_FORMAT */
+
#ifndef ASM_FORMAT_PRIVATE_NAME
-#define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
- do { \
- int len = strlen (NAME); \
- char *temp = (char *) alloca (len + 3); \
- temp[0] = 'L'; \
- strcpy (&temp[1], (NAME)); \
- temp[len + 1] = '.'; \
- temp[len + 2] = 0; \
- (OUTPUT) = (char *) alloca (strlen (NAME) + 11); \
- ASM_GENERATE_INTERNAL_LABEL (OUTPUT, temp, LABELNO); \
+# define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \
+ do { const char *const name_ = (NAME); \
+ char *const output_ = (OUTPUT) = (char *) alloca (strlen (name_) + 32);\
+ sprintf (output_, ASM_PN_FORMAT, name_, (unsigned long)(LABELNO)); \
} while (0)
#endif
#ifndef ASM_OUTPUT_ADDR_VEC_ELT
#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
-do { fprintf (FILE, "\t%s\t", ASM_LONG); \
- ASM_OUTPUT_INTERNAL_LABEL (FILE, "L", (VALUE)); \
+do { fputs (integer_asm_op (POINTER_SIZE / UNITS_PER_WORD, TRUE), FILE); \
+ (*targetm.asm_out.internal_label) (FILE, "L", (VALUE)); \
fputc ('\n', FILE); \
} while (0)
#endif
-/* Provide default for ASM_OUTPUT_ALTERNATE_LABEL_NAME. */
-#ifndef ASM_OUTPUT_ALTERNATE_LABEL_NAME
-#define ASM_OUTPUT_ALTERNATE_LABEL_NAME(FILE,INSN) \
-do { ASM_OUTPUT_LABEL(FILE,LABEL_ALTERNATE_NAME (INSN)); } while (0)
-#endif
-
/* choose a reasonable default for ASM_OUTPUT_ASCII. */
#ifndef ASM_OUTPUT_ASCII
#endif
#endif
+/* This is how to output the definition of a user-level label named
+ NAME, such as the label on a static function or variable NAME. */
+
+#ifndef ASM_OUTPUT_LABEL
+#define ASM_OUTPUT_LABEL(FILE,NAME) \
+ do { assemble_name ((FILE), (NAME)); fputs (":\n", (FILE)); } while (0)
+#endif
+
/* This is how to output a reference to a user-level label named NAME. */
#ifndef ASM_OUTPUT_LABELREF
#ifndef ASM_OUTPUT_DEBUG_LABEL
#define ASM_OUTPUT_DEBUG_LABEL(FILE, PREFIX, NUM) \
- ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM)
+ (*targetm.asm_out.internal_label) (FILE, PREFIX, NUM)
#endif
/* This is how we tell the assembler that a symbol is weak. */
#endif
#endif
+/* How to emit a .type directive. */
+#ifndef ASM_OUTPUT_TYPE_DIRECTIVE
+#if defined TYPE_ASM_OP && defined TYPE_OPERAND_FMT
+#define ASM_OUTPUT_TYPE_DIRECTIVE(STREAM, NAME, TYPE) \
+ do \
+ { \
+ fputs (TYPE_ASM_OP, STREAM); \
+ assemble_name (STREAM, NAME); \
+ fputs (", ", STREAM); \
+ fprintf (STREAM, TYPE_OPERAND_FMT, TYPE); \
+ putc ('\n', STREAM); \
+ } \
+ while (0)
+#endif
+#endif
+
+/* How to emit a .size directive. */
+#ifndef ASM_OUTPUT_SIZE_DIRECTIVE
+#ifdef SIZE_ASM_OP
+#define ASM_OUTPUT_SIZE_DIRECTIVE(STREAM, NAME, SIZE) \
+ do \
+ { \
+ HOST_WIDE_INT size_ = (SIZE); \
+ fputs (SIZE_ASM_OP, STREAM); \
+ assemble_name (STREAM, NAME); \
+ fprintf (STREAM, ", " HOST_WIDE_INT_PRINT_DEC "\n", size_); \
+ } \
+ while (0)
+
+#define ASM_OUTPUT_MEASURED_SIZE(STREAM, NAME) \
+ do \
+ { \
+ fputs (SIZE_ASM_OP, STREAM); \
+ assemble_name (STREAM, NAME); \
+ fputs (", .-", STREAM); \
+ assemble_name (STREAM, NAME); \
+ putc ('\n', STREAM); \
+ } \
+ while (0)
+
+#endif
+#endif
+
/* This determines whether or not we support weak symbols. */
#ifndef SUPPORTS_WEAK
-#ifdef ASM_WEAKEN_LABEL
+#if defined (ASM_WEAKEN_LABEL) || defined (ASM_WEAKEN_DECL)
#define SUPPORTS_WEAK 1
#else
#define SUPPORTS_WEAK 0
#endif
#endif
+/* By default, there is no prefix on user-defined symbols. */
+#ifndef USER_LABEL_PREFIX
+#define USER_LABEL_PREFIX ""
+#endif
+
/* If the target supports weak symbols, define TARGET_ATTRIBUTE_WEAK to
provide a weak attribute. Else define it to nothing.
/* If we have named sections, and we're using crtstuff to run ctors,
use them for registering eh frame information. */
-#if defined (TARGET_ASM_NAMED_SECTION) && !defined(EH_FRAME_IN_DATA_SECTION)
+#if defined (TARGET_ASM_NAMED_SECTION) && DWARF2_UNWIND_INFO \
+ && !defined(EH_FRAME_IN_DATA_SECTION)
#ifndef EH_FRAME_SECTION_NAME
#define EH_FRAME_SECTION_NAME ".eh_frame"
#endif
#endif
#endif
-/* If we have no definition for UNIQUE_SECTION, but do have the
- ability to generate arbitrary sections, construct something
- reasonable. */
-#ifndef UNIQUE_SECTION
-#define UNIQUE_SECTION(DECL,RELOC) \
-do { \
- int len; \
- const char *name; \
- char *string; \
- \
- name = IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (DECL)); \
- /* Strip off any encoding in name. */ \
- STRIP_NAME_ENCODING (name, name); \
- \
- len = strlen (name) + 1; \
- string = alloca (len + 1); \
- sprintf (string, ".%s", name); \
- \
- DECL_SECTION_NAME (DECL) = build_string (len, string); \
-} while (0)
-#endif
-
/* By default, we generate a label at the beginning and end of the
text section, and compute the size of the text section by
subtracting the two. However, on some platforms that doesn't
your target, you should override these values by defining the
appropriate symbols in your tm.h file. */
+#ifndef BITS_PER_UNIT
+#define BITS_PER_UNIT 8
+#endif
+
+#ifndef BITS_PER_WORD
+#define BITS_PER_WORD (BITS_PER_UNIT * UNITS_PER_WORD)
+#endif
+
#ifndef CHAR_TYPE_SIZE
#define CHAR_TYPE_SIZE BITS_PER_UNIT
#endif
+#ifndef BOOL_TYPE_SIZE
+/* `bool' has size and alignment `1', on almost all platforms. */
+#define BOOL_TYPE_SIZE CHAR_TYPE_SIZE
+#endif
+
#ifndef SHORT_TYPE_SIZE
#define SHORT_TYPE_SIZE (BITS_PER_UNIT * MIN ((UNITS_PER_WORD + 1) / 2, 2))
#endif
#define WCHAR_TYPE_SIZE INT_TYPE_SIZE
#endif
-#ifndef WCHAR_UNSIGNED
-#define WCHAR_UNSIGNED 0
-#endif
-
#ifndef FLOAT_TYPE_SIZE
#define FLOAT_TYPE_SIZE BITS_PER_WORD
#endif
#define LONG_DOUBLE_TYPE_SIZE (BITS_PER_WORD * 2)
#endif
+/* Width in bits of a pointer. Mind the value of the macro `Pmode'. */
+#ifndef POINTER_SIZE
+#define POINTER_SIZE BITS_PER_WORD
+#endif
+
#ifndef BUILD_VA_LIST_TYPE
#define BUILD_VA_LIST_TYPE(X) ((X) = ptr_type_node)
#endif
#define PIC_OFFSET_TABLE_REGNUM INVALID_REGNUM
#endif
-/* Type used by GCOV counters. Use 64bit data type if target supports
- it. */
-#if LONG_TYPE_SIZE >= 64
-#define GCOV_TYPE_SIZE LONG_TYPE_SIZE
-#else
-#define GCOV_TYPE_SIZE LONG_LONG_TYPE_SIZE
-#endif
-
-
/* By default, the preprocessor should be invoked the same way in C++
as in C. */
#ifndef CPLUSPLUS_CPP_SPEC
#endif
/* By default, the C++ compiler will use function addresses in the
- vtable entries. Setting this non-zero tells the compiler to use
+ vtable entries. Setting this nonzero tells the compiler to use
function descriptors instead. The value of this macro says how
many words wide the descriptor is (normally 2). It is assumed
that the address of a function descriptor may be treated as a
#define TARGET_VTABLE_USES_DESCRIPTORS 0
#endif
+/* By default, the vtable entries are void pointers, the so the alignment
+ is the same as pointer alignment. The value of this macro specifies
+ the alignment of the vtable entry in bits. It should be defined only
+ when special alignment is necessary. */
+#ifndef TARGET_VTABLE_ENTRY_ALIGN
+#define TARGET_VTABLE_ENTRY_ALIGN POINTER_SIZE
+#endif
+
+/* There are a few non-descriptor entries in the vtable at offsets below
+ zero. If these entries must be padded (say, to preserve the alignment
+ specified by TARGET_VTABLE_ENTRY_ALIGN), set this to the number of
+ words in each data entry. */
+#ifndef TARGET_VTABLE_DATA_ENTRY_DISTANCE
+#define TARGET_VTABLE_DATA_ENTRY_DISTANCE 1
+#endif
+
/* Select a format to encode pointers in exception handling data. We
prefer those that result in fewer dynamic relocations. Assume no
special support here and encode direct references. */
? ptrmemfunc_vbit_in_pfn : ptrmemfunc_vbit_in_delta)
#endif
-/* True if it is possible to profile code that does not have a frame
- pointer. */
-
-#ifndef TARGET_ALLOWS_PROFILING_WITHOUT_FRAME_POINTER
-#define TARGET_ALLOWS_PROFILING_WITHOUT_FRAME_POINTER true
-#endif
-
-/* GAS and SYSV4 assemblers accept these. */
-#if defined (OBJECT_FORMAT_ELF) || defined (OBJECT_FORMAT_ROSE)
-#ifndef UNALIGNED_SHORT_ASM_OP
-#define UNALIGNED_SHORT_ASM_OP "\t.2byte\t"
-#endif
-#ifndef UNALIGNED_INT_ASM_OP
-#define UNALIGNED_INT_ASM_OP "\t.4byte\t"
-#endif
-#ifndef UNALIGNED_DOUBLE_INT_ASM_OP
-#define UNALIGNED_DOUBLE_INT_ASM_OP "\t.8byte\t"
-#endif
-#endif /* OBJECT_FORMAT_ELF || OBJECT_FORMAT_ROSE */
-
-#ifndef ASM_BYTE_OP
-#define ASM_BYTE_OP "\t.byte\t"
-#endif
-
#ifndef DEFAULT_GDB_EXTENSIONS
#define DEFAULT_GDB_EXTENSIONS 1
#endif
#define PREFERRED_DEBUGGING_TYPE NO_DEBUG
#endif
+/* Define codes for all the float formats that we know of. */
+#define UNKNOWN_FLOAT_FORMAT 0
+#define IEEE_FLOAT_FORMAT 1
+#define VAX_FLOAT_FORMAT 2
+#define IBM_FLOAT_FORMAT 3
+#define C4X_FLOAT_FORMAT 4
+
+/* Default to IEEE float if not specified. Nearly all machines use it. */
+#ifndef TARGET_FLOAT_FORMAT
+#define TARGET_FLOAT_FORMAT IEEE_FLOAT_FORMAT
+#endif
+
+/* Determine the register class for registers suitable to be the base
+ address register in a MEM. Allow the choice to be dependent upon
+ the mode of the memory access. */
+#ifndef MODE_BASE_REG_CLASS
+#define MODE_BASE_REG_CLASS(MODE) BASE_REG_CLASS
+#endif
+
+#ifndef LARGEST_EXPONENT_IS_NORMAL
+#define LARGEST_EXPONENT_IS_NORMAL(SIZE) 0
+#endif
+
+#ifndef ROUND_TOWARDS_ZERO
+#define ROUND_TOWARDS_ZERO 0
+#endif
+
+#ifndef MODE_HAS_NANS
+#define MODE_HAS_NANS(MODE) \
+ (FLOAT_MODE_P (MODE) \
+ && TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT \
+ && !LARGEST_EXPONENT_IS_NORMAL (GET_MODE_BITSIZE (MODE)))
+#endif
+
+#ifndef MODE_HAS_INFINITIES
+#define MODE_HAS_INFINITIES(MODE) \
+ (FLOAT_MODE_P (MODE) \
+ && TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT \
+ && !LARGEST_EXPONENT_IS_NORMAL (GET_MODE_BITSIZE (MODE)))
+#endif
+
+#ifndef MODE_HAS_SIGNED_ZEROS
+#define MODE_HAS_SIGNED_ZEROS(MODE) \
+ (FLOAT_MODE_P (MODE) && TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT)
+#endif
+
+#ifndef MODE_HAS_SIGN_DEPENDENT_ROUNDING
+#define MODE_HAS_SIGN_DEPENDENT_ROUNDING(MODE) \
+ (FLOAT_MODE_P (MODE) \
+ && TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT \
+ && !ROUND_TOWARDS_ZERO)
+#endif
+
+/* If FLOAT_WORDS_BIG_ENDIAN is not defined in the header files,
+ then the word-endianness is the same as for integers. */
+#ifndef FLOAT_WORDS_BIG_ENDIAN
+#define FLOAT_WORDS_BIG_ENDIAN WORDS_BIG_ENDIAN
+#endif
+
+#ifndef TARGET_FLT_EVAL_METHOD
+#define TARGET_FLT_EVAL_METHOD 0
+#endif
+
+#ifndef HOT_TEXT_SECTION_NAME
+#define HOT_TEXT_SECTION_NAME "text.hot"
+#endif
+
+#ifndef UNLIKELY_EXECUTED_TEXT_SECTION_NAME
+#define UNLIKELY_EXECUTED_TEXT_SECTION_NAME "text.unlikely"
+#endif
+
+#ifndef VECTOR_MODE_SUPPORTED_P
+#define VECTOR_MODE_SUPPORTED_P(MODE) 0
+#endif
+
+/* Determine whether __cxa_atexit, rather than atexit, is used to
+ register C++ destructors for local statics and global objects. */
+#ifndef DEFAULT_USE_CXA_ATEXIT
+#define DEFAULT_USE_CXA_ATEXIT 0
+#endif
+
+/* Determine whether extra constraint letter should be handled
+ via address reload (like 'o'). */
+#ifndef EXTRA_MEMORY_CONSTRAINT
+#define EXTRA_MEMORY_CONSTRAINT(C,STR) 0
+#endif
+
+/* Determine whether extra constraint letter should be handled
+ as an address (like 'p'). */
+#ifndef EXTRA_ADDRESS_CONSTRAINT
+#define EXTRA_ADDRESS_CONSTRAINT(C,STR) 0
+#endif
+
+/* When a port defines CONSTRAINT_LEN, it should use DEFAULT_CONSTRAINT_LEN
+ for all the characters that it does not want to change, so things like the
+ 'length' of a digit in a matching constraint is an implementation detail,
+ and not part of the interface. */
+#define DEFAULT_CONSTRAINT_LEN(C,STR) 1
+
+#ifndef CONSTRAINT_LEN
+#define CONSTRAINT_LEN(C,STR) DEFAULT_CONSTRAINT_LEN (C, STR)
+#endif
+
+#if defined (CONST_OK_FOR_LETTER_P) && ! defined (CONST_OK_FOR_CONSTRAINT_P)
+#define CONST_OK_FOR_CONSTRAINT_P(VAL,C,STR) CONST_OK_FOR_LETTER_P (VAL, C)
+#endif
+
+#if defined (CONST_DOUBLE_OK_FOR_LETTER_P) && ! defined (CONST_DOUBLE_OK_FOR_CONSTRAINT_P)
+#define CONST_DOUBLE_OK_FOR_CONSTRAINT_P(OP,C,STR) \
+ CONST_DOUBLE_OK_FOR_LETTER_P (OP, C)
+#endif
+
+#define REG_CLASS_FROM_CONSTRAINT(C,STR) REG_CLASS_FROM_LETTER (C)
+
+#if defined (EXTRA_CONSTRAINT) && ! defined (EXTRA_CONSTRAINT_STR)
+#define EXTRA_CONSTRAINT_STR(OP, C,STR) EXTRA_CONSTRAINT (OP, C)
+#endif
+
+/* Determine whether the the entire c99 runtime
+ is present in the runtime library. */
+#ifndef TARGET_C99_FUNCTIONS
+#define TARGET_C99_FUNCTIONS 0
+#endif
+
+/* Indicate that CLZ and CTZ are undefined at zero. */
+#ifndef CLZ_DEFINED_VALUE_AT_ZERO
+#define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) 0
+#endif
+#ifndef CTZ_DEFINED_VALUE_AT_ZERO
+#define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) 0
+#endif
+
#endif /* ! GCC_DEFAULTS_H */
OSDN Git Service
