if test "$library_path_setting" != "ok"; then
AC_MSG_ERROR([
*** LIBRARY_PATH shouldn't contain the current directory when
-*** building egcs. Please change the environment variable
+*** building gcc. Please change the environment variable
*** and run configure again.])
fi
if test "$gcc_exec_prefix_setting" != "ok"; then
AC_MSG_ERROR([
*** GCC_EXEC_PREFIX shouldn't contain the current directory when
-*** building egcs. Please change the environment variable
+*** building gcc. Please change the environment variable
*** and run configure again.])
fi
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test ! -x "$DEFAULT_LINKER"; then
AC_MSG_WARN([cannot execute: $DEFAULT_LINKER: check --with-ld or env. var. DEFAULT_LINKER])
- elif test "GNU" = `$DEFAULT_LINKER -v </dev/null 2>&1 | sed '1s/^GNU.*/GNU/;q'`; then
+ elif $DEFAULT_LINKER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
gnu_ld_flag=yes
fi
AC_DEFINE_UNQUOTED(DEFAULT_LINKER,"$DEFAULT_LINKER")
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test ! -x "$DEFAULT_ASSEMBLER"; then
AC_MSG_WARN([cannot execute: $DEFAULT_ASSEMBLER: check --with-as or env. var. DEFAULT_ASSEMBLER])
- elif test "GNU" = `$DEFAULT_ASSEMBLER -v </dev/null 2>&1 | sed '1s/^GNU.*/GNU/;q'`; then
+ elif $DEFAULT_ASSEMBLER -v < /dev/null 2>&1 | grep GNU > /dev/null; then
gas_flag=yes
fi
AC_DEFINE_UNQUOTED(DEFAULT_ASSEMBLER,"$DEFAULT_ASSEMBLER")
local_prefix=/usr/local
fi
-gxx_include_dir=
+# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
+# passed in by the toplevel make and thus we'd get different behavior
+# depending on where we built the sources.
+gcc_gxx_include_dir=
# Specify the g++ header file directory
AC_ARG_WITH(gxx-include-dir,
[ --with-gxx-include-dir=DIR
[case "${withval}" in
yes) AC_MSG_ERROR(bad value ${withval} given for g++ include directory) ;;
no) ;;
-*) gxx_include_dir=$with_gxx_include_dir ;;
+*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
esac])
-if test x${gxx_include_dir} = x; then
+if test x${gcc_gxx_include_dir} = x; then
if test x${enable_version_specific_runtime_libs} = xyes; then
- gxx_include_dir='${libsubdir}/include/g++'
+ gcc_gxx_include_dir='${libsubdir}/include/g++'
else
topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
changequote(<<, >>)dnl
- gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/g++"-${libstdcxx_interface}
+ gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/g++"-${libstdcxx_interface}
changequote([, ])dnl
fi
fi
*) AC_MSG_ERROR(bad value ${enableval} given for checking option) ;;
esac])
+AC_ARG_ENABLE(cpp,
+[ --disable-cpp don't provide a user-visible C preprocessor.],
+[], [enable_cpp=yes])
+
+AC_ARG_WITH(cpp_install_dir,
+[ --with-cpp-install-dir=DIR
+ install the user visible C preprocessor in DIR
+ (relative to PREFIX) as well as PREFIX/bin.],
+[if test x$withval = xyes; then
+ AC_MSG_ERROR([option --with-cpp-install-dir requires an argument])
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi])
+
# Use cpplib+cppmain for the preprocessor, but don't link it with the compiler.
cpp_main=cccp
AC_ARG_ENABLE(cpplib,
# Link cpplib into the compiler proper, for C/C++/ObjC.
AC_ARG_ENABLE(c-cpplib,
[ --enable-c-cpplib link cpplib directly into C and C++ compilers
- (implies --enable-cpplib).],
+ (EXPERIMENTAL) (implies --enable-cpplib).],
if test x$enable_c_cpplib != xno; then
extra_c_objs="${extra_c_objs} libcpp.a"
extra_cxx_objs="${extra_cxx_objs} ../libcpp.a"
- extra_c_flags=-DUSE_CPPLIB=1
+ extra_c_flags="${extra_c_flags} -DUSE_CPPLIB=1"
cpp_main=cppmain
fi)
if test x$enable_c_mbchar != xno; then
extra_c_flags=-DMULTIBYTE_CHARS=1
fi)
-
+
+# Disable fast fixincludes
+AC_ARG_ENABLE(fast-fixincludes,
+[ --disable-fast-fixincludes
+ Disable the new fast fixincludes.
+ Run the old fixincludes script unconditionally],
+if test x$enable_fast_fixincludes = xno ; then
+ cp $srcdir/fixincludes ./fixinc.sh
+fi)
+
# Enable Haifa scheduler.
AC_ARG_ENABLE(haifa,
[ --enable-haifa use the experimental scheduler.
--disable-haifa don't use the experimental scheduler for the
targets which normally enable it.])
-# Fast fixincludes
-#
-# This is a work in progress...
-AC_ARG_WITH(fast-fixincludes,
-[ --with-fast-fixincludes use a faster fixinclude program (experimental)],
-fast_fixinc="$with_fast_fixincludes",
-fast_fixinc=no)
-
-# Enable init_priority.
-AC_ARG_ENABLE(init-priority,
-[ --enable-init-priority use attributes to assign initialization order
- for static objects.
- --disable-init-priority conform to ISO C++ rules for ordering static objects
- (i.e. initialized in order of declaration). ],
-if test x$enable_init_priority != xno; then
- extra_c_flags=-DUSE_INIT_PRIORITY
-fi)
# Enable threads
# Pass with no value to take the default
AC_MSG_CHECKING([whether a default assembler was specified])
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
- if test x"$with_gas" = x"no"; then
+ if test x"$gas_flag" = x"no"; then
AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER)])
else
AC_MSG_RESULT([yes ($DEFAULT_ASSEMBLER - GNU as)])
AC_MSG_CHECKING([whether a default linker was specified])
if test x"${DEFAULT_LINKER+set}" = x"set"; then
- if test x"$with_gnu_ld" = x"no"; then
+ if test x"$gnu_ld_flag" = x"no"; then
AC_MSG_RESULT([yes ($DEFAULT_LINKER)])
else
AC_MSG_RESULT([yes ($DEFAULT_LINKER - GNU ld)])
AC_HEADER_TIME
GCC_HEADER_STRING
AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h time.h fcntl.h unistd.h stab.h sys/file.h sys/time.h sys/resource.h sys/param.h sys/times.h sys/stat.h)
+AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h time.h fcntl.h unistd.h stab.h sys/file.h sys/time.h sys/resource.h sys/param.h sys/times.h sys/stat.h direct.h)
# Check for thread headers.
AC_CHECK_HEADER(thread.h, [have_thread_h=yes], [have_thread_h=])
GCC_FUNC_VFPRINTF_DOPRNT
GCC_FUNC_PRINTF_PTR
+
+case "${host}" in
+*-*-uwin*)
+ # Under some versions of uwin, vfork is notoriously buggy and the test
+ # can hang configure; on other versions, vfork exists just as a stub.
+ # FIXME: This should be removed once vfork in uwin's runtime is fixed.
+ ac_cv_func_vfork_works=no
+ ;;
+esac
AC_FUNC_VFORK
GCC_NEED_DECLARATIONS(malloc realloc calloc free bcopy bzero bcmp \
index rindex getenv atol sbrk abort atof strerror getcwd getwd \
- strsignal)
+ strsignal putc_unlocked fputs_unlocked strstr)
GCC_NEED_DECLARATIONS(getrlimit setrlimit, [
#include <sys/types.h>
AC_DECL_SYS_SIGLIST
+# mkdir takes a single argument on some systems.
+GCC_FUNC_MKDIR_TAKES_ONE_ARG
+
# File extensions
manext='.1'
objext='.o'
use_collect2=
# Set this to override the default target model.
target_cpu_default=
- # Set this to control which fixincludes program to use.
- if test x$fast_fixinc != xyes; then
- fixincludes=fixincludes
- else fixincludes=fixinc.sh ; fi
# Set this to control how the header file directory is installed.
install_headers_dir=install-headers-tar
# Set this to a non-empty list of args to pass to cpp if the target
tm_file=${cpu_type}/${cpu_type}.h
xm_file=${cpu_type}/xm-${cpu_type}.h
- # Set the default macros to define for GNU/Linux systems.
+ # On a.out targets, we need to use collect2.
+ case $machine in
+ *-*-*aout*)
+ use_collect2=yes
+ ;;
+ esac
+
+ # Common parts for linux-gnu and openbsd systems
case $machine in
*-*-linux-gnu*)
xm_defines="HAVE_ATEXIT POSIX BSTRING"
;;
+ *-*-openbsd*)
+ tm_file=${cpu_type}/openbsd.h
+ tmake_file="t-libc-ok t-openbsd"
+ # avoid surprises, always provide an xm-openbsd file
+ xm_file=${cpu_type}/xm-openbsd.h
+ # don't depend on processor x-fragments as well
+ xmake_file=none
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ tmake_file="${tmake_file} t-openbsd-thread"
+ fi
+ ;;
esac
case $machine in
a29k-*-*) # Default a29k environment.
use_collect2=yes
;;
+ alpha-*-interix)
+ tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h"
+
+ # GAS + IEEE_CONFORMANT+IEEE (no inexact);
+ #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE"
+
+ # GAS + IEEE_CONFORMANT
+ target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"
+
+ xm_file="alpha/xm-alpha-interix.h xm-interix.h"
+ xmake_file="x-interix alpha/t-pe"
+ tmake_file="alpha/t-interix alpha/t-ieee"
+ if test x$enable_threads = xyes ; then
+ thread_file='posix'
+ fi
+ if test x$stabs = xyes ; then
+ tm_file="${tm_file} dbxcoff.h"
+ fi
+ #prefix='$$INTERIX_ROOT'/usr/contrib
+ #local_prefix='$$INTERIX_ROOT'/usr/contrib
+ ;;
alpha*-*-linux-gnuecoff*)
tm_file="${tm_file} alpha/linux-ecoff.h alpha/linux.h"
target_cpu_default="MASK_GAS"
+ tmake_file="alpha/t-ieee"
gas=no
xmake_file=none
gas=yes gnu_ld=yes
alpha*-*-linux-gnulibc1*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-linux t-linux-gnulibc1 alpha/t-linux alpha/t-crtbe"
+ tmake_file="t-linux t-linux-gnulibc1 alpha/t-linux alpha/t-crtbe alpha/t-ieee"
extra_parts="crtbegin.o crtend.o"
- fixincludes=fixinc.wrap
xmake_file=none
gas=yes gnu_ld=yes
if test x$enable_threads = xyes; then
alpha*-*-linux-gnu*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-linux alpha/t-linux alpha/t-crtbe"
+ tmake_file="t-linux alpha/t-linux alpha/t-crtbe alpha/t-ieee"
extra_parts="crtbegin.o crtend.o"
xmake_file=none
- fixincludes=Makefile.in
gas=yes gnu_ld=yes
if test x$enable_threads = xyes; then
thread_file='posix'
alpha*-*-netbsd*)
tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-crtbe"
+ tmake_file="alpha/t-crtbe alpha/t-ieee"
extra_parts="crtbegin.o crtend.o"
xmake_file=none
- fixincludes=fixinc.wrap
gas=yes gnu_ld=yes
;;
+
+ alpha*-*-openbsd*)
+ # default x-alpha is only appropriate for dec-osf.
+ target_cpu_default="MASK_GAS"
+ tmake_file="alpha/t-ieee"
+ ;;
alpha*-dec-osf*)
if test x$stabs = xyes
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
+ tmake_file="alpha/t-ieee"
case $machine in
*-*-osf1*)
tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
;;
alpha*-*-vxworks*)
tm_file="${tm_file} dbx.h alpha/vxworks.h"
+ tmake_file="alpha/t-ieee"
if [ x$gas != xyes ]
then
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
+ thread_file='vxworks'
;;
alpha*-*-winnt*)
- tm_file="${tm_file} alpha/win-nt.h"
+ tm_file="${tm_file} alpha/alpha32.h alpha/win-nt.h winnt/win-nt.h"
xm_file="${xm_file} config/winnt/xm-winnt.h alpha/xm-winnt.h"
- tmake_file=t-libc-ok
+ tmake_file="t-libc-ok alpha/t-ieee"
xmake_file=winnt/x-winnt
extra_host_objs=oldnames.o
extra_gcc_objs="spawnv.o oldnames.o"
- fixincludes=fixinc.winnt
if test x$gnu_ld != xyes
then
extra_programs=ld.exe
alpha*-dec-vms*)
tm_file=alpha/vms.h
xm_file="${xm_file} alpha/xm-vms.h"
- tmake_file=alpha/t-vms
- fixincludes=Makefile.in
+ tmake_file="alpha/t-vms alpha/t-ieee"
;;
arc-*-elf*)
extra_parts="crtinit.o crtfini.o"
tm_file=arm/coff.h
tmake_file=arm/t-bare
;;
+ arm-*-vxworks*)
+ tm_file=arm/vxarm.h
+ tmake_file=arm/t-bare
+ thread_file='vxworks'
+ ;;
changequote(,)dnl
arm-*-riscix1.[01]*) # Acorn RISC machine (early versions)
changequote([,])dnl
arm-semi-aout | armel-semi-aout)
tm_file=arm/semi.h
tmake_file=arm/t-semi
- fixincludes=Makefile.in # There is nothing to fix
;;
arm-semi-aof | armel-semi-aof)
tm_file=arm/semiaof.h
tmake_file=arm/t-semiaof
- fixincludes=Makefile.in # There is nothing to fix
;;
arm*-*-netbsd*)
tm_file=arm/netbsd.h
xm_file="arm/xm-netbsd.h ${xm_file}"
tmake_file="t-netbsd arm/t-netbsd"
- # On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
+ use_collect2=yes
;;
arm*-*-linux-gnuaout*) # ARM GNU/Linux with a.out
cpu_type=arm
xmake_file=x-linux
tm_file=arm/linux-aout.h
tmake_file=arm/t-linux
- fixincludes=Makefile.in
gnu_ld=yes
;;
arm*-*-linux-gnu*) # ARM GNU/Linux with ELF
esac
tmake_file="t-linux arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in # Nothing to fix
gnu_ld=yes
+ case x${enable_threads} in
+ x | xyes | xpthreads | xposix)
+ thread_file='posix'
+ ;;
+ esac
+ ;;
+ arm*-*-uclinux*) # ARM ucLinux
+ tm_file=arm/uclinux-elf.h
+ tmake_file=arm/t-arm-elf
;;
arm*-*-aout)
tm_file=arm/aout.h
tm_file=arm/unknown-elf.h
tmake_file=arm/t-arm-elf
;;
+ arm*-*-oabi)
+ tm_file=arm/unknown-elf-oabi.h
+ tmake_file=arm/t-arm-elf
+ ;;
+ arm-*-pe*)
+ tm_file=arm/pe.h
+ tmake_file=arm/t-pe
+ extra_objs=pe.o
+ ;;
c1-convex-*) # Convex C1
target_cpu_default=1
use_collect2=yes
- fixincludes=Makefile.in
;;
c2-convex-*) # Convex C2
target_cpu_default=2
use_collect2=yes
- fixincludes=Makefile.in
;;
c32-convex-*)
target_cpu_default=4
use_collect2=yes
- fixincludes=Makefile.in
;;
c34-convex-*)
target_cpu_default=8
use_collect2=yes
- fixincludes=Makefile.in
;;
c38-convex-*)
target_cpu_default=16
use_collect2=yes
- fixincludes=Makefile.in
;;
c4x-*)
cpu_type=c4x
h8300-*-*)
float_format=i32
;;
+ hppa*-*-linux*)
+ target_cpu_default="(MASK_PA_11 | MASK_GAS | MASK_JUMP_IN_DELAY)"
+ tm_file="${tm_file} pa/elf.h linux.h pa/pa-linux.h"
+ tmake_file="t-linux pa/t-linux"
+ extra_parts="crtbegin.o crtend.o"
+ xmake_file=none
+ gas=yes gnu_ld=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
+ hppa*-*-openbsd*)
+ target_cpu_default="MASK_PA_11"
+ tmake_file=pa/t-openbsd
+ ;;
hppa1.1-*-pro*)
- tm_file="pa/pa-pro.h ${tm_file} pa/pa-pro-end.h libgloss.h"
+ target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
+ tm_file="${tm_file} elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
xm_file=pa/xm-papro.h
tmake_file=pa/t-pro
;;
hppa1.1-*-osf*)
- target_cpu_default=1
- tm_file="${tm_file} pa/pa-osf.h"
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-osf.h"
use_collect2=yes
- fixincludes=Makefile.in
;;
hppa1.1-*-rtems*)
- tm_file="pa/pa-pro.h ${tm_file} pa/pa-pro-end.h libgloss.h pa/rtems.h"
+ target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
+ tm_file="${tm_file} elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h"
xm_file=pa/xm-papro.h
tmake_file=pa/t-pro
;;
hppa1.0-*-osf*)
- tm_file="${tm_file} pa/pa-osf.h"
+ tm_file="${tm_file} pa/som.h pa/pa-osf.h"
use_collect2=yes
- fixincludes=Makefile.in
;;
hppa1.1-*-bsd*)
- target_cpu_default=1
+ tm_file="${tm_file} pa/som.h"
+ target_cpu_default="MASK_PA_11"
use_collect2=yes
- fixincludes=Makefile.in
;;
hppa1.0-*-bsd*)
+ tm_file="${tm_file} pa/som.h"
use_collect2=yes
- fixincludes=Makefile.in
;;
hppa1.0-*-hpux7*)
- tm_file="pa/pa-oldas.h ${tm_file} pa/pa-hpux7.h"
+ tm_file="pa/pa-oldas.h ${tm_file} pa/som.h pa/pa-hpux7.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
changequote(,)dnl
hppa1.0-*-hpux8.0[0-2]*)
changequote([,])dnl
- tm_file="${tm_file} pa/pa-hpux.h"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
changequote(,)dnl
hppa1.1-*-hpux8.0[0-2]*)
changequote([,])dnl
- target_cpu_default=1
- tm_file="${tm_file} pa/pa-hpux.h"
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa1.1-*-hpux8*)
- target_cpu_default=1
- tm_file="${tm_file} pa/pa-hpux.h"
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa1.0-*-hpux8*)
- tm_file="${tm_file} pa/pa-hpux.h"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
- target_cpu_default=1
- tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
tmake_file=pa/t-pa
use_collect2=yes
;;
hppa1.0-*-hpux10*)
- tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
+ tmake_file=pa/t-pa
if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
install_headers_dir=install-headers-cpio
use_collect2=yes
;;
+ hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
+ xm_file=pa/xm-pahpux.h
+ xmake_file=pa/x-pa-hpux
+ tmake_file=pa/t-pa
+ if [[ x$gas = xyes ]]
+ then
+ tm_file="${tm_file} pa/pa-gas.h"
+ fi
+# if [[ x$enable_threads = x ]]; then
+# enable_threads=$have_pthread_h
+# fi
+# if [[ x$enable_threads = xyes ]]; then
+# thread_file='dce'
+# tmake_file="${tmake_file} pa/t-dce-thr"
+# fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
+ hppa1.0-*-hpux11*)
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
+ xm_file=pa/xm-pahpux.h
+ xmake_file=pa/x-pa-hpux
+ if [[ x$gas = xyes ]]
+ then
+ tm_file="${tm_file} pa/pa-gas.h"
+ fi
+# if [[ x$enable_threads = x ]]; then
+# enable_threads=$have_pthread_h
+# fi
+# if [[ x$enable_threads = xyes ]]; then
+# thread_file='dce'
+# tmake_file="${tmake_file} pa/t-dce-thr"
+# fi
+ install_headers_dir=install-headers-cpio
+ use_collect2=yes
+ ;;
hppa1.1-*-hpux* | hppa2*-*-hpux*)
- target_cpu_default=1
- tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa1.0-*-hpux*)
- tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa1.1-*-hiux* | hppa2*-*-hiux*)
- target_cpu_default=1
- tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
+ target_cpu_default="MASK_PA_11"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa1.0-*-hiux*)
- tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
+ tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
if test x$gas = xyes
use_collect2=yes
;;
hppa*-*-lites*)
- target_cpu_default=1
+ tm_file="${tm_file} elfos.h pa/elf.h"
+ target_cpu_default="MASK_PA_11"
use_collect2=yes
- fixincludes=Makefile.in
;;
i370-*-mvs*)
;;
changequote(,)dnl
+ i[34567]86-*-elf*)
+changequote([,])dnl
+ xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h"
+ tm_file=i386/i386elf.h
+ tmake_file=i386/t-i386elf
+ xmake_file=x-svr4
+ ;;
+changequote(,)dnl
i[34567]86-ibm-aix*) # IBM PS/2 running AIX
changequote([,])dnl
if test x$gas = xyes
xmake_file=i386/x-sysv3
tm_file=i386/seq-sysv3.h
tmake_file=i386/t-crtstuff
- fixincludes=fixinc.ptx
extra_parts="crtbegin.o crtend.o"
install_headers_dir=install-headers-cpio
;;
tm_file=i386/seq2-sysv3.h
tmake_file=i386/t-crtstuff
extra_parts="crtbegin.o crtend.o"
- fixincludes=fixinc.ptx
install_headers_dir=install-headers-cpio
;;
changequote(,)dnl
tm_file=i386/ptx4-i.h
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
- fixincludes=fixinc.ptx
install_headers_dir=install-headers-cpio
;;
i386-sun-sunos*) # Sun i386 roadrunner
changequote([,])dnl
tm_file=i386/vxi386.h
tmake_file=i386/t-i386bare
+ thread_file='vxworks'
;;
changequote(,)dnl
i[34567]86-*-aout*)
changequote(,)dnl
i[34567]86-*-freebsdelf*)
changequote([,])dnl
- tm_file="i386/i386.h i386/att.h linux.h i386/freebsd-elf.h i386/perform.h"
- # On FreeBSD, the headers are already ok, except for math.h.
- fixincludes=fixinc.wrap
+ tm_file="i386/i386.h i386/att.h svr4.h i386/freebsd-elf.h i386/perform.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- tmake_file=i386/t-freebsd
+ tmake_file=t-freebsd
gas=yes
gnu_ld=yes
stabs=yes
i[34567]86-*-freebsd*)
changequote([,])dnl
tm_file=i386/freebsd.h
- # On FreeBSD, the headers are already ok, except for math.h.
- fixincludes=fixinc.wrap
- tmake_file=i386/t-freebsd
+ tmake_file=t-freebsd
;;
- # We are hoping OpenBSD is still close enough to NetBSD that we can
- # share the configurations.
changequote(,)dnl
- i[34567]86-*-netbsd* | i[34567]86-*-openbsd*)
+ i[34567]86-*-netbsd*)
changequote([,])dnl
tm_file=i386/netbsd.h
- # On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
tmake_file=t-netbsd
+ use_collect2=yes
+ ;;
+changequote(,)dnl
+ i[34567]86-*-openbsd*)
+changequote([,])dnl
+ # we need collect2 until our bug is fixed...
+ use_collect2=yes
;;
changequote(,)dnl
i[34567]86-*-coff*)
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
tm_file=i386/linux-oldld.h
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
;;
xmake_file=x-linux-aout
tmake_file="t-linux-aout i386/t-crtstuff"
tm_file=i386/linux-aout.h
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
;;
tm_file=i386/linux.h
tmake_file="t-linux t-linux-gnulibc1 i386/t-crtstuff"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
if test x$enable_threads = xyes; then
tm_file=i386/linux.h
tmake_file="t-linux i386/t-crtstuff"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
float_format=i386
if test x$enable_threads = xyes; then
;;
changequote(,)dnl
i[34567]86-*-gnu*)
+ float_format=i386
changequote([,])dnl
;;
changequote(,)dnl
i[34567]86-go32-msdos | i[34567]86-*-go32*)
changequote([,])dnl
- xm_file=i386/xm-go32.h
- tm_file=i386/go32.h
- tmake_file=i386/t-go32
+ echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead."
+ exit 1
;;
changequote(,)dnl
i[34567]86-pc-msdosdjgpp*)
changequote([,])dnl
- xm_file=i386/xm-go32.h
- tm_file=i386/go32.h
- tmake_file=i386/t-go32
- xmake_file=i386/x-go32
+ xm_file=i386/xm-djgpp.h
+ tm_file=i386/djgpp.h
+ tmake_file=i386/t-djgpp
+ xmake_file=i386/x-djgpp
gnu_ld=yes
gas=yes
exeext=.exe
- case $host in
- *pc-msdosdjgpp*)
+ case $host in *pc-msdosdjgpp*)
target_alias=djgpp
;;
esac
changequote([,])dnl
tm_file=i386/moss.h
tmake_file=t-libc-ok
- fixincludes=Makefile.in
gnu_ld=yes
gas=yes
;;
xm_file="xm-siglist.h xm-alloca.h ${xm_file} i386/xm-sco5.h"
xm_defines="USG SVR3"
xmake_file=i386/x-sco5
- fixincludes=fixinc.sco
install_headers_dir=install-headers-cpio
tm_file=i386/sco5.h
if test x$gas = xyes
else
tmake_file=i386/t-sco5
fi
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
;;
changequote(,)dnl
i[34567]86-*-sco3.2v4*) # 80386 running SCO 3.2v4 system
xm_file="${xm_file} i386/xm-sco.h"
xm_defines="USG SVR3 BROKEN_LDEXP SMALL_ARG_MAX NO_SYS_SIGLIST"
xmake_file=i386/x-sco4
- fixincludes=fixinc.sco
install_headers_dir=install-headers-cpio
if test x$stabs = xyes
then
tmake_file=i386/t-sol2
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
xmake_file=x-svr4
- case $machine in
-changequote(,)dnl
- *-*-solaris2.[0-4])
-changequote([,])dnl
- fixincludes=fixinc.svr4;;
- *)
- fixincludes=fixinc.wrap;;
- esac
if test x$enable_threads = xyes; then
thread_file='solaris'
fi
changequote([,])dnl
xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
xm_defines="USG POSIX"
- tm_file=i386/sysv4.h
+ tm_file=i386/sysv5.h
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
tmake_file=i386/t-crtpic
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
- fixincludes=fixinc.svr4
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
;;
changequote(,)dnl
i[34567]86-*-sysv4*) # Intel 80386's running system V.4
tmake_file="i386/t-crtpic i386/t-udk"
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
- fixincludes="fixinc.svr4"
+ install_headers_dir=install-headers-cpio
;;
changequote(,)dnl
i[34567]86-*-osf1*) # Intel 80386's running OSF/1 1.3+
cpu_type=i386
xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h i386/xm-osf1elf.h"
xm_defines="USE_C_ALLOCA SMALL_ARG_MAX"
- fixincludes=Makefile.in #Don't do it on OSF/1
if test x$stabs = xyes
then
tm_file=i386/osf1elfgdb.h
tm_file=i386/win32.h
xmake_file=i386/x-cygwin
extra_objs=winnt.o
- fixincludes=Makefile.in
if test x$enable_threads = xyes; then
thread_file='win32'
fi
tm_file=i386/cygwin.h
xmake_file=i386/x-cygwin
extra_objs=winnt.o
- fixincludes=Makefile.in
if test x$enable_threads = xyes; then
thread_file='win32'
fi
tmake_file="i386/t-cygwin i386/t-mingw32"
extra_objs=winnt.o
xmake_file=i386/x-cygwin
- fixincludes=Makefile.in
if test x$enable_threads = xyes; then
thread_file='win32'
fi
esac
;;
changequote(,)dnl
+ i[34567]86-*-uwin*)
+changequote([,])dnl
+ tm_file=i386/uwin.h
+ xm_file="${xm_file} i386/xm-uwin.h"
+ xm_defines="USG NO_STAB_H NO_SYS_SIGLIST"
+ tmake_file="i386/t-cygwin i386/t-uwin"
+ extra_objs=winnt.o
+ xmake_file=i386/x-cygwin
+ if test x$enable_threads = xyes; then
+ thread_file='win32'
+ fi
+ exeext=.exe
+ ;;
+changequote(,)dnl
+ i[34567]86-*-interix*)
+changequote([,])dnl
+ tm_file="i386/i386-interix.h interix.h"
+ xm_file="i386/xm-i386-interix.h xm-interix.h"
+ xm_defines="USG NO_SYS_SIGLIST"
+ tmake_file="i386/t-interix"
+ extra_objs=interix.o
+ xmake_file=x-interix
+ if test x$enable_threads = xyes ; then
+ thread_file='posix'
+ fi
+ if test x$stabs = xyes ; then
+ tm_file="${tm_file} dbxcoff.h"
+ fi
+ ;;
+changequote(,)dnl
i[34567]86-*-winnt3*)
changequote([,])dnl
tm_file=i386/win-nt.h
tmake_file=i386/t-winnt
extra_host_objs="winnt.o oldnames.o"
extra_gcc_objs="spawnv.o oldnames.o"
- fixincludes=fixinc.winnt
if test x$gnu_ld != xyes
then
extra_programs=ld.exe
tm_file=i386/dgux.h
tmake_file=i386/t-dgux
xmake_file=i386/x-dgux
- fixincludes=fixinc.dgux
install_headers_dir=install-headers-cpio
;;
i860-alliant-*) # Alliant FX/2800
float_format=m68k
;;
m68020-*-elf* | m68k-*-elf*)
- tm_file="m68k/m68020-elf.h libgloss.h"
+ tm_file="m68k/m68020-elf.h"
xm_file=m68k/xm-m68kv.h
tmake_file=m68k/t-m68kelf
header_files=math-68881.h
;;
m68k*-*-netbsd*)
tm_file=m68k/netbsd.h
- # On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
tmake_file=t-netbsd
float_format=m68k
+ use_collect2=yes
+ ;;
+ m68k*-*-openbsd*)
+ float_format=m68k
+ # we need collect2 until our bug is fixed...
+ use_collect2=yes
;;
m68k-*-sysv3*) # Motorola m68k's running system V.3
xm_file="xm-alloca.h ${xm_file}"
xmake_file=x-linux
tm_file=m68k/linux-aout.h
tmake_file="t-linux-aout m68k/t-linux-aout"
- fixincludes=Makefile.in # The headers are ok already.
extra_headers=math-68881.h
float_format=m68k
gnu_ld=yes
tm_file=m68k/linux.h
tmake_file="t-linux t-linux-gnulibc1 m68k/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in # The headers are ok already.
extra_headers=math-68881.h
float_format=m68k
gnu_ld=yes
tm_file=m68k/linux.h
tmake_file="t-linux m68k/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in # The headers are ok already.
extra_headers=math-68881.h
float_format=m68k
gnu_ld=yes
then
tmake_file=m88k/t-dgux-gas
fi
- fixincludes=fixinc.dgux
;;
m88k-dolphin-sysv3*)
tm_file=m88k/dolph.h
tmake_file=m88k/t-luna
fi
;;
+ m88k-*-openbsd*)
+ tmake_file="${tmake_file} m88k/t-luna-gas"
+ ;;
m88k-*-sysv3*)
tm_file=m88k/sysv3.h
extra_parts="crtbegin.o crtend.o"
tmake_file=m88k/t-sysv4
;;
mips-sgi-irix6*) # SGI System V.4., IRIX 6
- tm_file=mips/iris6.h
+ if test "x$gnu_ld" = xyes
+ then
+ tm_file="mips/iris6.h mips/iris6gld.h"
+ else
+ tm_file=mips/iris6.h
+ fi
+ tmake_file=mips/t-iris6
xm_file=mips/xm-iris6.h
- fixincludes=fixinc.irix
xmake_file=mips/x-iris6
- tmake_file=mips/t-iris6
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
;;
mips-wrs-vxworks)
- tm_file="mips/elf.h libgloss.h"
+ tm_file="mips/elf.h mips/vxworks.h"
tmake_file=mips/t-ecoff
gas=yes
gnu_ld=yes
extra_parts="crtbegin.o crtend.o"
-# thread_file='vxworks'
+ thread_file='vxworks'
;;
mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
tm_file="mips/iris6.h mips/cross64.h"
xm_defines=USG
xm_file="mips/xm-iris5.h"
- fixincludes=Makefile.in
xmake_file=mips/x-iris
tmake_file=mips/t-cross64
# See comment in mips/iris[56].h files.
fi
xm_defines=USG
xm_file="mips/xm-iris5.h"
- fixincludes=fixinc.irix
xmake_file=mips/x-iris
# mips-tfile doesn't work yet
tmake_file=mips/t-mips-gas
;;
mips-dec-bsd*) # Decstation running 4.4 BSD
tm_file=mips/dec-bsd.h
- fixincludes=
if test x$gas = xyes
then
tmake_file=mips/t-mips-gas
mipsel-*-netbsd* | mips-dec-netbsd*) # Decstation running NetBSD
tm_file=mips/netbsd.h
# On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
tmake_file=t-netbsd
;;
mips*-*-linux*) # Linux MIPS, either endian.
extra_parts="crtbegin.o crtend.o"
gnu_ld=yes
gas=yes
- fixincludes=Makefile.in
+ ;;
+ mips*el-*-openbsd*) # mips little endian
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ tm_file=mips/openbsd.h
+ ;;
+ mips*-*-openbsd*) # mips big endian
+ target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ tm_file=mips/openbsd-be.h
;;
mips-sony-bsd* | mips-sony-newsos*) # Sony NEWS 3600 or risc/news.
tm_file="mips/news4.h ${tm_file}"
tmake_file=mips/t-ecoff
;;
mipsel-*-elf*)
- tm_file="mips/elfl.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elfl.h"
+ tmake_file=mips/t-elf
;;
mips-*-elf*)
- tm_file="mips/elf.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elf.h"
+ tmake_file=mips/t-elf
;;
mips64el-*-elf*)
- tm_file="mips/elfl64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elfl64.h"
+ tmake_file=mips/t-elf
;;
mips64orionel-*-elf*)
- tm_file="mips/elforion.h mips/elfl64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elforion.h mips/elfl64.h"
+ tmake_file=mips/t-elf
;;
mips64-*-elf*)
- tm_file="mips/elf64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elf64.h"
+ tmake_file=mips/t-elf
;;
mips64orion-*-elf*)
- tm_file="mips/elforion.h mips/elf64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elforion.h mips/elf64.h"
+ tmake_file=mips/t-elf
;;
mips64orion-*-rtems*)
tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h"
tmake_file="mips/t-ecoff t-rtems"
;;
mipstx39el-*-elf*)
- tm_file="mips/r3900.h mips/elfl.h mips/abi64.h libgloss.h"
+ tm_file="mips/r3900.h mips/elfl.h mips/abi64.h"
tmake_file=mips/t-r3900
;;
mipstx39-*-elf*)
- tm_file="mips/r3900.h mips/elf.h mips/abi64.h libgloss.h"
+ tm_file="mips/r3900.h mips/elf.h mips/abi64.h"
tmake_file=mips/t-r3900
- # FIXME mips-elf should be fixed to use crtstuff.
- use_collect2=yes
;;
mips-*-*) # Default MIPS RISC-OS 4.0.
if test x$stabs = xyes; then
tm_file=ns32k/netbsd.h
xm_file="ns32k/xm-netbsd.h ${xm_file}"
# On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
tmake_file=t-netbsd
+ use_collect2=yes
;;
pdp11-*-bsd)
tm_file="${tm_file} pdp11/2bsd.h"
;;
pdp11-*-*)
;;
+ ns32k-*-openbsd*)
+ # Nothing special
+ ;;
pyramid-*-*)
cpu_type=pyr
xmake_file=pyr/x-pyr
xmake_file=romp/x-mach
use_collect2=yes
;;
+ romp-*-openbsd*)
+ # Nothing special
+ ;;
+ powerpc-*-openbsd*)
+ tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd"
+ ;;
powerpc-*-beos*)
cpu_type=rs6000
tm_file=rs6000/beos.h
powerpc-*-eabiaix*)
tm_file=rs6000/eabiaix.h
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- fixincludes=Makefile.in
extra_headers=ppc-asm.h
;;
powerpc-*-eabisim*)
tm_file=rs6000/eabisim.h
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- fixincludes=Makefile.in
extra_headers=ppc-asm.h
;;
powerpc-*-eabi*)
else
tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
fi
- fixincludes=Makefile.in
extra_headers=ppc-asm.h
;;
powerpc-*-rtems*)
else
tmake_file="rs6000/t-ppc t-rtems rs6000/t-ppccomm"
fi
- fixincludes=Makefile.in
extra_headers=ppc-asm.h
;;
powerpc-*-linux-gnulibc1)
tmake_file="rs6000/t-ppc t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
fi
xmake_file=x-linux
- fixincludes=Makefile.in
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
if test x$enable_threads = xyes; then
tmake_file="rs6000/t-ppc t-linux rs6000/t-ppccomm"
fi
xmake_file=x-linux
- fixincludes=Makefile.in
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_headers=ppc-asm.h
if test x$enable_threads = xyes; then
powerpcle-*-eabisim*)
tm_file=rs6000/eabilesim.h
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- fixincludes=Makefile.in
extra_headers=ppc-asm.h
;;
powerpcle-*-eabi*)
else
tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
fi
- fixincludes=Makefile.in
extra_headers=ppc-asm.h
;;
powerpcle-*-winnt* )
tm_file=rs6000/win-nt.h
tmake_file=rs6000/t-winnt
# extra_objs=pe.o
- fixincludes=Makefile.in
if test x$enable_threads = xyes; then
thread_file='win32'
fi
tmake_file=rs6000/t-winnt
xmake_file=rs6000/x-cygwin
# extra_objs=pe.o
- fixincludes=Makefile.in
if test x$enable_threads = xyes; then
thread_file='win32'
fi
tmake_file="rs6000/t-ppc rs6000/t-ppccomm"
fi
xmake_file=rs6000/x-sysv4
- case $machine in
-changequote(,)dnl
- *-*-solaris2.[0-4])
-changequote([,])dnl
- fixincludes=fixinc.svr4;;
- *)
- fixincludes=fixinc.wrap;;
- esac
extra_headers=ppc-asm.h
;;
changequote(,)dnl
changequote([,])dnl
tm_file=rs6000/aix31.h
xmake_file=rs6000/x-aix31
+ float_format=none
use_collect2=yes
;;
changequote(,)dnl
else
tmake_file=rs6000/t-newas
fi
+ float_format=none
use_collect2=yes
;;
changequote(,)dnl
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
changequote([,])dnl
- if test "$gnu_ld" = yes
- tm_file=rs6000/aix41-gld.h
- else
- tm_file=rs6000/aix41.h
- fi
+ tm_file=rs6000/aix41.h
if test x$host != x$target
then
tmake_file=rs6000/t-xnewas
else
tmake_file=rs6000/t-newas
fi
- xmake_file=rs6000/x-aix41
+ if test "$gnu_ld" = yes
+ then
+ xmake_file=rs6000/x-aix41-gld
+ else
+ xmake_file=rs6000/x-aix41
+ fi
+ float_format=none
use_collect2=yes
;;
changequote(,)dnl
- rs6000-ibm-aix4.[3456789].* | powerpc-ibm-aix4.[3456789].*)
+ rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
changequote([,])dnl
tm_file=rs6000/aix43.h
if test x$host != x$target
tmake_file=rs6000/t-aix43
fi
xmake_file=rs6000/x-aix43
+ float_format=none
use_collect2=yes
;;
changequote(,)dnl
tmake_file=rs6000/t-aix43
fi
xmake_file=rs6000/x-aix43
+ float_format=none
use_collect2=yes
;;
rs6000-ibm-aix*)
+ float_format=none
use_collect2=yes
;;
rs6000-bull-bosx)
+ float_format=none
use_collect2=yes
;;
rs6000-*-mach*)
;;
sparc-*-netbsd*)
tm_file=sparc/netbsd.h
- # On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
tmake_file=t-netbsd
+ use_collect2=yes
+ ;;
+ sparc-*-openbsd*)
+ # we need collect2 until our bug is fixed...
+ use_collect2=yes
;;
sparc-*-bsd*)
tm_file=sparc/bsd.h
xm_file="${xm_file} sparc/xm-linux.h"
tm_file=sparc/linux-aout.h
xmake_file=x-linux
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
;;
sparc-*-linux-gnulibc1*) # Sparc's running GNU/Linux, libc5
tm_file=sparc/linux.h
tmake_file="t-linux t-linux-gnulibc1"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
+ float_format=sparc
;;
sparc-*-linux-gnu*) # Sparc's running GNU/Linux, libc6
xm_file="${xm_file} sparc/xm-linux.h"
tm_file=sparc/linux.h
tmake_file="t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- fixincludes=Makefile.in #On Linux, the headers are ok already.
gnu_ld=yes
if test x$enable_threads = xyes; then
thread_file='posix'
fi
+ float_format=sparc
;;
sparc-*-lynxos*)
if test x$gas = xyes
tmake_file="sparc/t-sol2 sparc/t-sol2-64"
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
- fixincludes=fixinc.wrap
- float_format=i128
+ float_format=none
if test x${enable_threads} = x ; then
enable_threads=$have_pthread_h
if test x${enable_threads} = x ; then
fi
fi
;;
+ sparc-hal-solaris2*)
+ xm_file=sparc/xm-sol2.h
+ tm_file="sparc/sol2.h sparc/hal.h"
+ tmake_file="sparc/t-halos sparc/t-sol2"
+ xmake_file=sparc/x-sysv4
+ extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
+ broken_install=yes
+ ;;
sparc-*-solaris2*)
if test x$gnu_ld = xyes
then
changequote(,)dnl
*-*-solaris2.[0-4])
changequote([,])dnl
- fixincludes=fixinc.svr4;;
+ float_format=i128
+ ;;
*)
- fixincludes=fixinc.wrap;;
+ float_format=none
+ ;;
esac
- float_format=i128
if test x${enable_threads} = x; then
enable_threads=$have_pthread_h
if test x${enable_threads} = x; then
xm_file="sparc/xm-sp64.h sparc/xm-linux.h"
tm_file=sparc/linux64.h
xmake_file=x-linux
- fixincludes=Makefile.in # The headers are ok already.
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
+ float_format=sparc
;;
# This hasn't been upgraded to GCC 2.
# tahoe-harris-*) # Harris tahoe, using COFF.
xm_file=arm/xm-thumb.h
md_file=arm/thumb.md
tmake_file=arm/t-thumb
- fixincludes=Makefile.in # There is nothing to fix
+ ;;
+ thumb-*-elf* | thumbel-*-elf*)
+ tm_file=arm/telf.h
+ out_file=arm/thumb.c
+ xm_file=arm/xm-thumb.h
+ md_file=arm/thumb.md
+ tmake_file=arm/t-thumb-elf
+ ;;
+ thumb-*-linux-gnu*)
+ tm_file=arm/linux-telf.h
+ out_file=arm/thumb.c
+ xm_file=arm/xm-thumb.h
+ md_file=arm/thumb.md
+ tmake_file=arm/t-thumb-linux
+ ;;
+ thumb-*-uclinux*)
+ tm_file=arm/uclinux-telf.h
+ out_file=arm/thumb.c
+ md_file=arm/thumb.md
+ tmake_file=arm/t-thumb-linux
+ xm_file=arm/xm-thumb.h
+ ;;
+ thumb-wrs-vxworks)
+ tm_file=arm/tcoff.h
+ out_file=arm/thumb.c
+ xm_file=arm/xm-thumb.h
+ md_file=arm/thumb.md
+ tmake_file=arm/t-thumb
+ thread_file='vxworks'
+ ;;
+ thumb-*-pe)
+ tm_file=arm/tpe.h
+ out_file=arm/thumb.c
+ xm_file=arm/xm-thumb.h
+ md_file=arm/thumb.md
+ tmake_file=arm/t-pe-thumb
+ extra_objs=pe.o
;;
# This hasn't been upgraded to GCC 2.
# tron-*-*)
;;
vax-*-netbsd*)
tm_file="${tm_file} netbsd.h vax/netbsd.h"
- # On NetBSD, the headers are already okay, except for math.h.
- fixincludes=fixinc.wrap
tmake_file=t-netbsd
float_format=vax
+ use_collect2=yes
+ ;;
+ vax-*-openbsd*)
+ tmake_file="${tmake_file} vax/t-openbsd"
;;
vax-*-ultrix*) # vaxen running ultrix
tm_file="${tm_file} vax/ultrix.h"
# GNU tools are the only tools.
gnu_ld=yes
gas=yes
- # On GNU, the headers are already okay.
- fixincludes=Makefile.in
xmake_file=x-linux # These details are the same as Linux.
tmake_file=t-gnu # These are not.
;;
*-*-sysv4*)
- fixincludes=fixinc.svr4
xmake_try_sysv=x-sysv
install_headers_dir=install-headers-cpio
;;
target_cpu_default2=1
;;
i586-*-*)
- target_cpu_default2=2
+ case $target_alias in
+ k6-*)
+ target_cpu_default2=4
+ ;;
+ *)
+ target_cpu_default2=2
+ ;;
+ esac
;;
i686-*-* | i786-*-*)
target_cpu_default2=3
alpha*-*-*)
case $machine in
alphaev6*)
- target_cpu_default2="MASK_CPU_EV6|MASK_BXW|MASK_CIX|MASK_MAX"
+ target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
;;
alphapca56*)
target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
xarm[23678] | xarm250 | xarm[67][01]0 \
| xarm7m | xarm7dm | xarm7dmi | xarm7tdmi \
| xarm7100 | xarm7500 | xarm7500fe | xarm810 \
- | xstrongarm | xstrongarm110)
+ | xstrongarm | xstrongarm110 | xstrongarm1100)
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
xcommon | xpower | xpower2 | xpowerpc | xrios \
| xrios1 | xrios2 | xrsc | xrsc1 \
| x601 | x602 | x603 | x603e | x604 | x604e | x620 \
+ | xec603e | x740 | x750 | x401 \
| x403 | x505 | x801 | x821 | x823 | x860)
target_cpu_default2="\"$with_cpu\""
;;
then float_format=i64
fi
+if test $float_format = none
+then float_h_file=Makefile.in
+else float_h_file=float-$float_format.h
+fi
+
if test x$enable_haifa = x
then
case $target in
esac
fi
+# Handle cpp installation.
+if test x$enable_cpp != xno
+then
+ tmake_file="$tmake_file t-install-cpp"
+fi
+
# Say what files are being used for the output code and MD file.
echo "Using \`$srcdir/config/$out_file' to output insns."
echo "Using \`$srcdir/config/$md_file' as machine description file."
# auto-host.h is the file containing items generated by autoconf and is
# the first file included by config.h.
null_defines=
-host_xm_file="auto-host.h gansidecl.h ${host_xm_file}"
+host_xm_file="auto-host.h gansidecl.h ${host_xm_file} hwint.h"
# If host=build, it is correct to have hconfig include auto-host.h
# as well. If host!=build, we are in error and need to do more
# work to find out the build config parameters.
if test x$host = x$build
then
- build_xm_file="auto-host.h gansidecl.h ${build_xm_file}"
+ build_xm_file="auto-host.h gansidecl.h ${build_xm_file} hwint.h"
else
# We create a subdir, then run autoconf in the subdir.
# To prevent recursion we set host and build for the new
mv auto-host.h ../auto-build.h
cd ..
rm -rf $tempdir
- build_xm_file="auto-build.h gansidecl.h ${build_xm_file}"
+ build_xm_file="auto-build.h gansidecl.h ${build_xm_file} hwint.h"
fi
xm_file="gansidecl.h ${xm_file}"
fi
for file in `eval echo '$'$var`; do
+ case $file in
+ auto-config.h)
+ ;;
+ *)
+ echo '#ifdef IN_GCC' >>$link
+ ;;
+ esac
echo "#include \"$file\"" >>$link
+ case $file in
+ auto-config.h)
+ ;;
+ *)
+ echo '#endif' >>$link
+ ;;
+ esac
done
for def in `eval echo '$'$define`; do
gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
changequote([,])dnl
+# Internationalization
+PACKAGE=gcc
+VERSION="$gcc_version"
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION")
+AC_SUBST(PACKAGE)
+AC_SUBST(VERSION)
+
+ALL_LINGUAS="en_UK"
+
+# NLS support is still experimental, so disable it by default for now.
+AC_ARG_ENABLE(nls,
+ [ --enable-nls use Native Language Support (disabled by default)],
+ , enable_nls=no)
+
+AM_GNU_GETTEXT
+XGETTEXT="AWK='$AWK' \$(SHELL) \$(top_srcdir)/exgettext $XGETTEXT"
+
# Get an absolute path to the GCC top-level source directory
holddir=`pwd`
cd $srcdir
if $symbolic_link $srcdir/gcc.c symtest.tem 2>/dev/null
then
cc_set_by_configure="\$(CC)"
+ quoted_cc_set_by_configure="\$(CC)"
stage_prefix_set_by_configure="\$(STAGE_PREFIX)"
else
rm -f symtest.tem
symbolic_link="cp"
fi
cc_set_by_configure="\`case '\$(CC)' in stage*) echo '\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\$(CC)';; esac\`"
+ quoted_cc_set_by_configure="\\\`case '\\\$(CC)' in stage*) echo '\\\$(CC)' | sed -e 's|stage|../stage|g';; *) echo '\\\$(CC)';; esac\\\`"
stage_prefix_set_by_configure="\`case '\$(STAGE_PREFIX)' in stage*) echo '\$(STAGE_PREFIX)' | sed -e 's|stage|../stage|g';; *) echo '\$(STAGE_PREFIX)';; esac\`"
fi
rm -f symtest.tem
tm_file_list=
for f in $tm_file; do
- if test $f != "gansidecl.h" ; then
- tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
- else
- tm_file_list="${tm_file_list} $f"
- fi
+ case $f in
+ gansidecl.h )
+ tm_file_list="${tm_file_list} $f" ;;
+ *) tm_file_list="${tm_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
host_xm_file_list=
for f in $host_xm_file; do
- if test $f != "auto-host.h" -a $f != "gansidecl.h" ; then
- host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
- else
- host_xm_file_list="${host_xm_file_list} $f"
- fi
+ case $f in
+ auto-host.h | gansidecl.h | hwint.h )
+ host_xm_file_list="${host_xm_file_list} $f" ;;
+ *) host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
build_xm_file_list=
for f in $build_xm_file; do
- if test $f != "auto-build.h" -a $f != "auto-host.h" -a $f != "gansidecl.h" ; then
- build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
- else
- build_xm_file_list="${build_xm_file_list} $f"
- fi
+ case $f in
+ auto-build.h | auto-host.h | gansidecl.h | hwint.h )
+ build_xm_file_list="${build_xm_file_list} $f" ;;
+ *) build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
# Define macro CROSS_COMPILE in compilation
fi
elif test x$host = x$target; then
# Native build.
- gcc_cv_as=as$host_exeext
+ # Search the same directories that the installed compiler will
+ # search. Else we may find the wrong assembler and lose. If we
+ # do not find a suitable assembler binary, then try the user's
+ # path.
+ #
+ # Also note we have to check MD_EXEC_PREFIX before checking the
+ # user's path. Unfortunately, there is no good way to get at the
+ # value of MD_EXEC_PREFIX here. So we do a brute force search
+ # through all the known MD_EXEC_PREFIX values. Ugh. This needs
+ # to be fixed as part of the make/configure rewrite too.
+
+ if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ else
+ test_prefix=$exec_prefix
+ fi
+
+ # If the loop below does not find an assembler, then use whatever
+ # one we can find in the users's path.
+ # user's path.
+ as=as$host_exeext
+
+ test_dirs="$test_prefix/lib/gcc-lib/$target/$gcc_version \
+ $test_prefix/lib/gcc-lib/$target \
+ /usr/lib/gcc/$target/$gcc_version \
+ /usr/lib/gcc/$target \
+ $test_prefix/$target/bin/$target/$gcc_version \
+ $test_prefix/$target/bin \
+ /usr/libexec \
+ /usr/ccs/gcc \
+ /usr/ccs/bin \
+ /udk/usr/ccs/bin \
+ /bsd43/usr/lib/cmplrs/cc \
+ /usr/cross64/usr/bin \
+ /usr/lib/cmplrs/cc \
+ /sysv/usr/lib/cmplrs/cc \
+ /svr4/usr/lib/cmplrs/cc \
+ /usr/bin"
+
+ for dir in $test_dirs; do
+ if test -f $dir/as$host_exeext; then
+ gcc_cv_as=$dir/as$host_exeext
+ break;
+ fi
+ done
fi
if test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
fi
AC_MSG_RESULT($gcc_cv_as_subsections)
+case "$target" in
+ sparc*-*-*)
+ AC_MSG_CHECKING(assembler .register pseudo-op support)
+ gcc_cv_as_register_pseudo_op=
+ if test x$gcc_cv_as != x; then
+ # Check if we have .register
+ echo ".register %g2, #scratch" > conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_register_pseudo_op=yes
+ AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP)
+ fi
+ rm -f conftest.s conftest.o
+ fi
+ AC_MSG_RESULT($gcc_cv_as_register_pseudo_op)
+
+ AC_MSG_CHECKING([assembler offsetable %lo() support])
+ gcc_cv_as_offsetable_lo10=
+ if test x$gcc_cv_as != x; then
+ # Check if assembler has offsetable %lo()
+ echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
+ echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
+ gcc_cv_as_flags64="-xarch=v9"
+ if ! $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_flags64="-64"
+ if ! $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_flags64=""
+ fi
+ fi
+ if test -n "$gcc_cv_as_flags64" ; then
+ if $gcc_cv_as $gcc_cv_as_flags64 -o conftest1.o conftest1.s > /dev/null 2>&1; then
+ if cmp conftest.o conftest1.o > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_as_offsetable_lo10=yes
+ AC_DEFINE(HAVE_AS_OFFSETABLE_LO10)
+ fi
+ fi
+ fi
+ rm -f conftest.s conftest.o conftest1.s conftest1.o
+ fi
+ AC_MSG_RESULT($gcc_cv_as_offsetable_lo10)
+ ;;
+
+changequote(,)dnl
+ i[34567]86-*-*)
+changequote([,])dnl
+ AC_MSG_CHECKING(assembler instructions)
+ gcc_cv_as_instructions=
+ if test x$gcc_cv_as != x; then
+ set "filds fists" "filds mem; fists mem"
+ while test $# -gt 0
+ do
+ echo "$2" > conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" "
+ AC_DEFINE_UNQUOTED(HAVE_GAS_`echo "$1" | tr '[a-z ]' '[A-Z_]'`)
+ fi
+ shift 2
+ done
+ rm -f conftest.s conftest.o
+ fi
+ AC_MSG_RESULT($gcc_cv_as_instructions)
+ ;;
+esac
+
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
all_compilers=
all_stagestuff=
all_diff_excludes=
-all_outputs=Makefile
+all_outputs='Makefile intl/Makefile po/Makefile.in fixinc/Makefile'
# List of language makefile fragments.
all_lang_makefiles=
all_headers=
for t in $target_list
do
x=
- for l in .. $all_languages
+ for lang in .. $all_languages
do
- if test $l != ".."; then
- x="$x $l.$t"
+ if test $lang != ".."; then
+ x="$x $lang.$t"
fi
done
echo "lang.$t: $x" >> Make-hooks
AC_SUBST(sched_cflags)
if test x$enable_haifa != x; then
# Explicitly remove files that need to be recompiled for the Haifa scheduler.
- for x in genattrtab.o toplev.o loop.o unroll.o *sched.o; do
+ for x in genattrtab.o toplev.o *sched.o; do
if test -f $x; then
echo "Removing $x"
rm -f $x
done
fi
-# Warn if using init_priority.
-AC_MSG_CHECKING(whether to enable init_priority by default)
-if test x$enable_init_priority != xyes; then
- enable_init_priority=no
+# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
+# absolute path for gcc_tooldir based on inserting the number of up-directory
+# movements required to get from $(exec_prefix) to $(prefix) into the basic
+# $(libsubdir)/@(unlibsubdir) based path.
+# Don't set gcc_tooldir to tooldir since that's only passed in by the toplevel
+# make and thus we'd get different behavior depending on where we built the
+# sources.
+if test x$exec_prefix = xNONE -o x$exec_prefix = x$prefix; then
+ gcc_tooldir='$(libsubdir)/$(unlibsubdir)/../$(target_alias)'
+else
+changequote(<<, >>)dnl
+# An explanation of the sed strings:
+# -e 's|^\$(prefix)||' matches and eliminates 'prefix' from 'exec_prefix'
+# -e 's|/$||' match a trailing forward slash and eliminates it
+# -e 's|^[^/]|/|' forces the string to start with a forward slash (*)
+# -e 's|/[^/]*|../|g' replaces each occurance of /<directory> with ../
+#
+# (*) Note this pattern overwrites the first character of the string
+# with a forward slash if one is not already present. This is not a
+# problem because the exact names of the sub-directories concerned is
+# unimportant, just the number of them matters.
+#
+# The practical upshot of these patterns is like this:
+#
+# prefix exec_prefix result
+# ------ ----------- ------
+# /foo /foo/bar ../
+# /foo/ /foo/bar ../
+# /foo /foo/bar/ ../
+# /foo/ /foo/bar/ ../
+# /foo /foo/bar/ugg ../../
+#
+ dollar='$$'
+ gcc_tooldir="\$(libsubdir)/\$(unlibsubdir)/\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/\$(dollar)||' -e 's|^[^/]|/|' -e 's|/[^/]*|../|g'\`\$(target_alias)"
+changequote([, ])dnl
fi
-AC_MSG_RESULT($enable_init_priority)
+AC_SUBST(gcc_tooldir)
+AC_SUBST(dollar)
# Nothing to do for FLOAT_H, float_format already handled.
objdir=`pwd`
# Substitute configuration variables
AC_SUBST(subdirs)
-AC_SUBST(all_languages)
AC_SUBST(all_boot_languages)
AC_SUBST(all_compilers)
-AC_SUBST(all_lang_makefiles)
-AC_SUBST(all_stagestuff)
AC_SUBST(all_diff_excludes)
-AC_SUBST(all_lib2funcs)
AC_SUBST(all_headers)
+AC_SUBST(all_lang_makefiles)
+AC_SUBST(all_languages)
+AC_SUBST(all_lib2funcs)
+AC_SUBST(all_stagestuff)
+AC_SUBST(build_exeext)
+AC_SUBST(build_install_headers_dir)
+AC_SUBST(build_xm_file_list)
+AC_SUBST(cc_set_by_configure)
+AC_SUBST(quoted_cc_set_by_configure)
+AC_SUBST(cpp_install_dir)
AC_SUBST(cpp_main)
-AC_SUBST(extra_passes)
-AC_SUBST(extra_programs)
-AC_SUBST(extra_parts)
+AC_SUBST(dep_host_xmake_file)
+AC_SUBST(dep_tmake_file)
+AC_SUBST(extra_c_flags)
AC_SUBST(extra_c_objs)
-AC_SUBST(extra_cxx_objs)
AC_SUBST(extra_cpp_objs)
-AC_SUBST(extra_c_flags)
+AC_SUBST(extra_cxx_objs)
+AC_SUBST(extra_headers_list)
AC_SUBST(extra_objs)
+AC_SUBST(extra_parts)
+AC_SUBST(extra_passes)
+AC_SUBST(extra_programs)
+AC_SUBST(fixinc_defs)
+AC_SUBST(float_h_file)
+AC_SUBST(gcc_gxx_include_dir)
+AC_SUBST(gcc_version)
+AC_SUBST(gcc_version_trigger)
+AC_SUBST(host_exeext)
AC_SUBST(host_extra_gcc_objs)
-AC_SUBST(extra_headers_list)
-AC_SUBST(dep_host_xmake_file)
-AC_SUBST(dep_tmake_file)
-AC_SUBST(out_file)
-AC_SUBST(out_object_file)
-AC_SUBST(md_file)
-AC_SUBST(tm_file_list)
-AC_SUBST(build_xm_file_list)
AC_SUBST(host_xm_file_list)
-AC_SUBST(lang_specs_files)
+AC_SUBST(install)
+AC_SUBST(JAVAGC)
AC_SUBST(lang_options_files)
+AC_SUBST(lang_specs_files)
AC_SUBST(lang_tree_files)
-AC_SUBST(thread_file)
-AC_SUBST(objc_boehm_gc)
-AC_SUBST(JAVAGC)
-AC_SUBST(gcc_version)
-AC_SUBST(gcc_version_trigger)
AC_SUBST(local_prefix)
-AC_SUBST(gxx_include_dir)
-AC_SUBST(fixincludes)
-AC_SUBST(build_install_headers_dir)
-AC_SUBST(build_exeext)
-AC_SUBST(host_exeext)
-AC_SUBST(float_format)
-AC_SUBST(will_use_collect2)
AC_SUBST(maybe_use_collect2)
-AC_SUBST(cc_set_by_configure)
+AC_SUBST(md_file)
+AC_SUBST(objc_boehm_gc)
+AC_SUBST(out_file)
+AC_SUBST(out_object_file)
AC_SUBST(stage_prefix_set_by_configure)
-AC_SUBST(install)
AC_SUBST(symbolic_link)
+AC_SUBST(thread_file)
+AC_SUBST(tm_file_list)
+AC_SUBST(will_use_collect2)
+
AC_SUBST_FILE(target_overrides)
AC_SUBST_FILE(host_overrides)
fi
done
else true ; fi
+# Avoid having to add intl to our include paths.
+if test -f intl/libintl.h; then
+ echo creating libintl.h
+ echo '#include "intl/libintl.h"' >libintl.h
+fi
],
[
host='${host}'
cross_defines='${cross_defines}'
cross_overrides='${cross_overrides}'
build_overrides='${build_overrides}'
+cpp_install_dir='${cpp_install_dir}'
])