ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
+ --with-local-prefix=DIR specifies directory to put local include"
+ac_help="$ac_help
+ --with-gxx-include-dir=DIR
+ specifies directory to put g++ header files"
+ac_help="$ac_help
+ --with-cpp-install-dir=DIR
+ install the user visible C preprocessor in DIR
+ (relative to PREFIX) as well as PREFIX/bin"
+ac_help="$ac_help
--with-gnu-ld arrange to work with GNU ld."
ac_help="$ac_help
--with-ld arrange to use the specified ld (full pathname)"
ac_help="$ac_help
--with-as arrange to use the specified as (full pathname)"
ac_help="$ac_help
- --with-stabs arrange to use stabs instead of host debug format"
-ac_help="$ac_help
- --with-elf arrange to use ELF instead of host debug format"
-ac_help="$ac_help
- --with-local-prefix=DIR specifies directory to put local include"
-ac_help="$ac_help
- --with-gxx-include-dir=DIR
- specifies directory to put g++ header files"
-ac_help="$ac_help
- --enable-multilib enable library support for multiple ABIs"
+ --enable-werror enable -Werror in bootstrap stage2 and later"
ac_help="$ac_help
--enable-checking[=LIST]
enable expensive run-time checks. With LIST,
Categories are: misc,tree,rtl,rtlflag,gc,gcac;
default is misc,tree,gc,rtlflag"
ac_help="$ac_help
- --with-cpp-install-dir=DIR
- install the user visible C preprocessor in DIR
- (relative to PREFIX) as well as PREFIX/bin"
+ --enable-coverage[=LEVEL]
+ enable compiler\'s code coverage collection.
+ Use to measure compiler performance and locate
+ unused parts of the compiler. With LEVEL, specify
+ optimization. Values are opt, noopt,
+ default is noopt"
+ac_help="$ac_help
+ --with-stabs arrange to use stabs instead of host debug format"
+ac_help="$ac_help
+ --with-elf arrange to use ELF instead of host debug format"
+ac_help="$ac_help
+ --enable-multilib enable library support for multiple ABIs"
ac_help="$ac_help
--enable-__cxa_atexit enable __cxa_atexit for C++"
ac_help="$ac_help
ac_help="$ac_help
--disable-shared don't provide a shared libgcc"
ac_help="$ac_help
+ --with-sysroot[=DIR] Search for usr/lib, usr/include, et al, within DIR."
+ac_help="$ac_help
--with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib"
ac_help="$ac_help
+ --enable-initfini-array use .init_array/.fini_array sections"
+ac_help="$ac_help
+ --enable-sjlj-exceptions
+ arrange to use setjmp/longjmp exception handling"
+ac_help="$ac_help
+ --enable-libunwind-exceptions force use libunwind for exceptions"
+ac_help="$ac_help
--enable-nls use Native Language Support (default)"
ac_help="$ac_help
--with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib"
enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
- --enable-sjlj-exceptions
- arrange to use setjmp/longjmp exception handling"
-ac_help="$ac_help
--enable-version-specific-runtime-libs
specify that runtime libraries should be
installed in a compiler-specific directory"
-remove=rm
-hard_link=ln
-symbolic_link='ln -s'
-copy=cp
+# Determine the host, build, and target systems
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:669: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:690: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:708: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+
+# Define variables host_canonical and build_canonical
+build_canonical=${build}
+host_canonical=${host}
+
+
+
+target_subdir=
+if test "${host}" != "${target}" ; then
+ target_subdir=${target_alias}/
+fi
+
+
+# Set program_transform_name
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
# Check for bogus environment variables.
# Test if LIBRARY_PATH contains the notation for the current directory
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:620: checking LIBRARY_PATH variable" >&5
+echo "configure:773: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:645: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:798: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
*** and run configure again." 1>&2; exit 1; }
fi
-# Check for additional parameters
+# -----------
+# Directories
+# -----------
+
+# Specify the local prefix
+local_prefix=
+# Check whether --with-local-prefix or --without-local-prefix was given.
+if test "${with_local_prefix+set}" = set; then
+ withval="$with_local_prefix"
+ case "${withval}" in
+yes) { echo "configure: error: bad value ${withval} given for local include directory prefix" 1>&2; exit 1; } ;;
+no) ;;
+*) local_prefix=$with_local_prefix ;;
+esac
+fi
+
+
+# Default local prefix if it is empty
+if test x$local_prefix = x; then
+ local_prefix=/usr/local
+fi
+
+# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
+# passed in by the toplevel make and thus we'd get different behavior
+# depending on where we built the sources.
+gcc_gxx_include_dir=
+# Specify the g++ header file directory
+# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
+if test "${with_gxx_include_dir+set}" = set; then
+ withval="$with_gxx_include_dir"
+ case "${withval}" in
+yes) { echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2; exit 1; } ;;
+no) ;;
+*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
+esac
+fi
+
+
+if test x${gcc_gxx_include_dir} = x; then
+ if test x${enable_version_specific_runtime_libs} = xyes; then
+ gcc_gxx_include_dir='${libsubdir}/include/c++'
+ else
+ topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
+ gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
+ fi
+fi
+
+# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
+if test "${with_cpp_install_dir+set}" = set; then
+ withval="$with_cpp_install_dir"
+ if test x$withval = xyes; then
+ { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi
+fi
+
+
+# -------------------
+# Find default linker
+# -------------------
# With GNU ld
# Check whether --with-gnu-ld or --without-gnu-ld was given.
fi
+echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
+echo "configure:907: checking whether a default linker was specified" >&5
+if test x"${DEFAULT_LINKER+set}" = x"set"; then
+ if test x"$gnu_ld_flag" = x"no"; then
+ echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
+ else
+ echo "$ac_t""yes ($DEFAULT_LINKER - GNU ld)" 1>&6
+ fi
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+# ----------------------
+# Find default assembler
+# ----------------------
+
# With GNU as
# Check whether --with-gnu-as or --without-gnu-as was given.
if test "${with_gnu_as+set}" = set; then
fi
-# With stabs
-# Check whether --with-stabs or --without-stabs was given.
-if test "${with_stabs+set}" = set; then
- withval="$with_stabs"
- stabs="$with_stabs"
+echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
+echo "configure:951: checking whether a default assembler was specified" >&5
+if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
+ if test x"$gas_flag" = x"no"; then
+ echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
+ else
+ echo "$ac_t""yes ($DEFAULT_ASSEMBLER - GNU as)" 1>&6
+ fi
else
- stabs=no
+ echo "$ac_t""no" 1>&6
fi
-
-# With ELF
-# Check whether --with-elf or --without-elf was given.
-if test "${with_elf+set}" = set; then
- withval="$with_elf"
- elf="$with_elf"
-else
- elf=no
-fi
-
-
-# Specify the local prefix
-local_prefix=
-# Check whether --with-local-prefix or --without-local-prefix was given.
-if test "${with_local_prefix+set}" = set; then
- withval="$with_local_prefix"
- case "${withval}" in
-yes) { echo "configure: error: bad value ${withval} given for local include directory prefix" 1>&2; exit 1; } ;;
-no) ;;
-*) local_prefix=$with_local_prefix ;;
-esac
-fi
-
-
-# Default local prefix if it is empty
-if test x$local_prefix = x; then
- local_prefix=/usr/local
-fi
-
-# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
-# passed in by the toplevel make and thus we'd get different behavior
-# depending on where we built the sources.
-gcc_gxx_include_dir=
-# Specify the g++ header file directory
-# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
-if test "${with_gxx_include_dir+set}" = set; then
- withval="$with_gxx_include_dir"
- case "${withval}" in
-yes) { echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2; exit 1; } ;;
-no) ;;
-*) gcc_gxx_include_dir=$with_gxx_include_dir ;;
-esac
-fi
-
-
-if test x${gcc_gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- gcc_gxx_include_dir='${libsubdir}/include/g++'
- else
- topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
- gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
- fi
-fi
-
-# Determine whether or not multilibs are enabled.
-# Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
- enableval="$enable_multilib"
- :
-else
- enable_multilib=yes
-fi
-
-
-
-# Enable expensive internal checks
-# Check whether --enable-checking or --disable-checking was given.
-if test "${enable_checking+set}" = set; then
- enableval="$enable_checking"
- ac_checking=
-ac_tree_checking=
-ac_rtl_checking=
-ac_rtlflag_checking=
-ac_gc_checking=
-ac_gc_always_collect=
-case "${enableval}" in
-yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;
- ac_rtlflag_checking=1 ;;
-no) ;;
-*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
- set fnord $enableval; shift
- IFS="$ac_save_IFS"
- for check
- do
- case $check in
- misc) ac_checking=1 ;;
- tree) ac_tree_checking=1 ;;
- rtlflag) ac_rtlflag_checking=1 ;;
- rtl) ac_rtl_checking=1 ;;
- gc) ac_gc_checking=1 ;;
- gcac) ac_gc_always_collect=1 ;;
- *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
- esac
- done
- ;;
-esac
-
-else
- # Enable some checks by default for development versions of GCC
-ac_checking=1; ac_tree_checking=1; ac_gc_checking=1; ac_rtlflag_checking=1;
-fi
-
-if test x$ac_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_CHECKING 1
-EOF
-
-fi
-if test x$ac_tree_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_TREE_CHECKING 1
-EOF
-
-fi
-if test x$ac_rtl_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_RTL_CHECKING 1
-EOF
-
-fi
-if test x$ac_rtlflag_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_RTL_FLAG_CHECKING 1
-EOF
-
-fi
-if test x$ac_gc_checking != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_GC_CHECKING 1
-EOF
-
-fi
-if test x$ac_gc_always_collect != x ; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_GC_ALWAYS_COLLECT 1
-EOF
-
-fi
-
-# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
-if test "${with_cpp_install_dir+set}" = set; then
- withval="$with_cpp_install_dir"
- if test x$withval = xyes; then
- { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
-elif test x$withval != xno; then
- cpp_install_dir=$withval
-fi
-fi
-
-
-# Enable __cxa_atexit for C++.
-# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
-if test "${enable___cxa_atexit+set}" = set; then
- enableval="$enable___cxa_atexit"
- :
-fi
-
-if test x$enable___cxa_atexit = xyes; then
- cat >> confdefs.h <<\EOF
-#define DEFAULT_USE_CXA_ATEXIT 1
-EOF
-
-fi
-
-# Enable Multibyte Characters for C/C++
-# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
-if test "${enable_c_mbchar+set}" = set; then
- enableval="$enable_c_mbchar"
- if test x$enable_c_mbchar != xno; then
- cat >> confdefs.h <<\EOF
-#define MULTIBYTE_CHARS 1
-EOF
-
-fi
-fi
-
-
-# Enable threads
-# Pass with no value to take the default
-# Pass with a value to specify a thread package
-# Check whether --enable-threads or --disable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval="$enable_threads"
- :
-else
- enable_threads=''
-fi
-
-
-enable_threads_flag=$enable_threads
-# Check if a valid thread package
-case x${enable_threads_flag} in
- x | xno)
- # No threads
- target_thread_file='single'
- ;;
- xyes)
- # default
- target_thread_file=''
- ;;
- xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
- xsolaris | xwin32 | xdce | xrtems| xvxworks | xaix)
- target_thread_file=$enable_threads_flag
- ;;
- *)
- echo "$enable_threads is an unknown thread package" 1>&2
- exit 1
- ;;
-esac
-
-# Check whether --enable-objc-gc or --disable-objc-gc was given.
-if test "${enable_objc_gc+set}" = set; then
- enableval="$enable_objc_gc"
- if test x$enable_objc_gc = xno; then
- objc_boehm_gc=''
-else
- objc_boehm_gc=1
-fi
-else
- objc_boehm_gc=''
-fi
-
-
-# Check whether --with-dwarf2 or --without-dwarf2 was given.
-if test "${with_dwarf2+set}" = set; then
- withval="$with_dwarf2"
- dwarf2="$with_dwarf2"
-else
- dwarf2=no
-fi
-
-
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
- enableval="$enable_shared"
-
- case $enable_shared in
- yes | no) ;;
- *)
- enable_shared=no
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
- esac
-
-else
- enable_shared=yes
-fi
-
-
-
-# Determine the host, build, and target systems
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1034: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1055: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1073: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-
-# Set program_transform_name
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
-else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
+# ---------------
+# Find C compiler
+# ---------------
# Find the native compiler
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1121: checking for $ac_word" >&5
+echo "configure:970: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1151: checking for $ac_word" >&5
+echo "configure:1000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1202: checking for $ac_word" >&5
+echo "configure:1051: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1234: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1083: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1245 "configure"
+#line 1094 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1276: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1125: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1281: checking whether we are using GNU C" >&5
+echo "configure:1130: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1290: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1309: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1158: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1342: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1191: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1345: checking whether cc understands -c and -o together" >&5
+echo "configure:1194: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1206: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1363: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1212: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1365: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1214: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1215: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
-# See if GNAT has been installed
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
-
+# -------------------------
+# Check C compiler features
+# -------------------------
-# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1412: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
+echo "configure:1255: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GNATBIND"; then
- ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+ save_CFLAGS="$CFLAGS"
+CFLAGS="-Wno-long-long"
+cat > conftest.$ac_ext <<EOF
+#line 1262 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1269: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_prog_cc_no_long_long=yes
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_prog_cc_no_long_long=no
fi
-GNATBIND="$ac_cv_prog_GNATBIND"
-if test -n "$GNATBIND"; then
- echo "$ac_t""$GNATBIND" 1>&6
-else
- echo "$ac_t""no" 1>&6
+rm -f conftest*
+CFLAGS="$save_CFLAGS"
fi
+echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
-if test -z "$ac_cv_prog_GNATBIND"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "gnatbind", so it can be a program name with args.
-set dummy gnatbind; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1444: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1285: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GNATBIND"; then
- ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 1300 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1306: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GNATBIND="gnatbind"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no"
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 1317 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 1334 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
fi
+rm -f conftest*
fi
-GNATBIND="$ac_cv_prog_GNATBIND"
-if test -n "$GNATBIND"; then
- echo "$ac_t""$GNATBIND" 1>&6
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
else
- echo "$ac_t""no" 1>&6
+ ac_cv_prog_CPP="$CPP"
fi
+echo "$ac_t""$CPP" 1>&6
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1365: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- GNATBIND="no"
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 1372 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1379: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
+rm -f conftest*
+done
+
fi
-echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
-echo "configure:1477: checking for compiler driver that understands Ada" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for volatile""... $ac_c" 1>&6
+echo "configure:1405: checking for volatile" >&5
+if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat >conftest.adb <<EOF
-procedure conftest is begin null; end conftest;
+ cat > conftest.$ac_ext <<EOF
+#line 1410 "configure"
+#include "confdefs.h"
+
+int main() {
+volatile int foo;
+; return 0; }
EOF
-gcc_cv_prog_adac=no
-# Have to do ac_tool_prefix and user overrides by hand.
-user_adac=$ADAC
-user_cc=$CC
-for cand in ${ac_tool_prefix}$user_adac $user_adac \
- ${ac_tool_prefix}$user_cc $user_cc \
- ${ac_tool_prefix}gcc gcc \
- ${ac_tool_prefix}cc cc \
- ${ac_tool_prefix}gnatgcc gnatgcc \
- ${ac_tool_prefix}gnatcc gnatcc \
- ${ac_tool_prefix}adagcc adagcc \
- ${ac_tool_prefix}adacc adacc ; do
- # There is a bug in all released versions of GCC which causes the
- # driver to exit successfully when the appropriate language module
- # has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
- # Therefore we must check for the error message as well as an
- # unsuccessful exit.
- errors=`($cand -c conftest.adb) 2>&1 || echo failure`
- if test x"$errors" = x; then
- gcc_cv_prog_adac=$cand
- break
- fi
-done
-rm -f conftest.*
+if { (eval echo configure:1417: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_c_volatile=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_c_volatile=no
+fi
+rm -f conftest*
fi
-echo "$ac_t""$gcc_cv_prog_adac" 1>&6
-ADAC=$gcc_cv_prog_adac
-
+echo "$ac_t""$gcc_cv_c_volatile" 1>&6
+if test $gcc_cv_c_volatile = yes ; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_VOLATILE 1
+EOF
-if test x$GNATBIND != xno && test x$ADAC != xno; then
- have_gnat=yes
-else
- have_gnat=no
fi
-echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1522: checking whether ${CC-cc} accepts -Wno-long-long" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
+echo $ac_n "checking for long double""... $ac_c" 1>&6
+echo "configure:1439: checking for long double" >&5
+if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- save_CFLAGS="$CFLAGS"
-CFLAGS="-Wno-long-long"
+ if test "$GCC" = yes; then
+ gcc_cv_c_long_double=yes
+else
cat > conftest.$ac_ext <<EOF
-#line 1529 "configure"
+#line 1447 "configure"
#include "confdefs.h"
int main() {
-
+/* The Stardent Vistra knows sizeof(long double), but does not support it. */
+long double foo = 0.0;
+/* On Ultrix 4.3 cc, long double is 4 and double is 8. */
+switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1457: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_prog_cc_no_long_long=yes
+ gcc_cv_c_long_double=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_prog_cc_no_long_long=no
+ gcc_cv_c_long_double=no
fi
rm -f conftest*
-CFLAGS="$save_CFLAGS"
+fi
fi
-echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
+echo "$ac_t""$gcc_cv_c_long_double" 1>&6
+if test $gcc_cv_c_long_double = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LONG_DOUBLE 1
+EOF
-if test x$have_gnat != xno ; then
-echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1553: checking whether ${ADAC} accepts -Wno-long-long" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
+fi
+
+echo $ac_n "checking for long long int""... $ac_c" 1>&6
+echo "configure:1479: checking for long long int" >&5
+if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat >conftest.adb <<EOF
-procedure conftest is begin null; end conftest;
+ cat > conftest.$ac_ext <<EOF
+#line 1484 "configure"
+#include "confdefs.h"
+
+int main() {
+long long int i;
+; return 0; }
EOF
-if $ADAC -Wno-long-long -c conftest.adb 1>&5 2>&5 ; then
- ac_cv_prog_adac_no_long_long=yes
+if { (eval echo configure:1491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_long_long=yes
else
- ac_cv_prog_adac_no_long_long=no
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_long_long=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_adac_no_long_long" 1>&6
+echo "$ac_t""$ac_cv_c_long_long" 1>&6
+ if test $ac_cv_c_long_long = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LONG_LONG 1
+EOF
+
+ fi
+echo $ac_n "checking for __int64""... $ac_c" 1>&6
+echo "configure:1511: checking for __int64" >&5
+if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_cv_prog_adac_no_long_long=yes
-fi
+ cat > conftest.$ac_ext <<EOF
+#line 1516 "configure"
+#include "confdefs.h"
-strict1_warn=
-if test $ac_cv_prog_cc_no_long_long = yes && \
- test $ac_cv_prog_adac_no_long_long = yes ; then
- strict1_warn="-pedantic -Wno-long-long"
+int main() {
+__int64 i;
+; return 0; }
+EOF
+if { (eval echo configure:1523: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c___int64=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c___int64=no
+fi
+rm -f conftest*
fi
+echo "$ac_t""$ac_cv_c___int64" 1>&6
+ if test $ac_cv_c___int64 = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE___INT64 1
+EOF
+
+ fi
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1581: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
+echo "configure:1544: checking for built-in _Bool" >&5
+if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1596 "configure"
+#line 1549 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+
+int main() {
+_Bool foo;
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1602: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+if { (eval echo configure:1556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_c__bool=yes
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
+ gcc_cv_c__bool=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$gcc_cv_c__bool" 1>&6
+if test $gcc_cv_c__bool = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE__BOOL 1
+EOF
+
+fi
+
+
+# sizeof(char) is 1 by definition.
+echo $ac_n "checking size of short""... $ac_c" 1>&6
+echo "configure:1580: checking size of short" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1613 "configure"
+#line 1586 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (short) == $ac_size):;
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1619: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+if { (eval echo configure:1596: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_short=$ac_size
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
+fi
+rm -f conftest*
+ if test x$ac_cv_sizeof_short != x ; then break; fi
+done
+
+fi
+
+if test x$ac_cv_sizeof_short = x ; then
+ { echo "configure: error: cannot determine a size for short" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof_short" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+EOF
+
+
+echo $ac_n "checking size of int""... $ac_c" 1>&6
+echo "configure:1619: checking size of int" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1630 "configure"
+#line 1625 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (int) == $ac_size):;
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1636: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+if { (eval echo configure:1635: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_int=$ac_size
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
fi
rm -f conftest*
+ if test x$ac_cv_sizeof_int != x ; then break; fi
+done
+
fi
-rm -f conftest*
+
+if test x$ac_cv_sizeof_int = x ; then
+ { echo "configure: error: cannot determine a size for int" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof_int" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+EOF
+
+
+echo $ac_n "checking size of long""... $ac_c" 1>&6
+echo "configure:1658: checking size of long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
+ cat > conftest.$ac_ext <<EOF
+#line 1664 "configure"
+#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (long) == $ac_size):;
+; return 0; }
+EOF
+if { (eval echo configure:1674: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_long=$ac_size
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
rm -f conftest*
- ac_cv_prog_CPP="$CPP"
+ if test x$ac_cv_sizeof_long != x ; then break; fi
+done
+
fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
+
+if test x$ac_cv_sizeof_long = x ; then
+ { echo "configure: error: cannot determine a size for long" 1>&2; exit 1; }
fi
-echo "$ac_t""$CPP" 1>&6
+echo "$ac_t""$ac_cv_sizeof_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+EOF
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1661: checking for inline" >&5
-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+
+if test $ac_cv_c_long_long = yes; then
+ echo $ac_n "checking size of long long""... $ac_c" 1>&6
+echo "configure:1698: checking size of long long" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1668 "configure"
+#line 1704 "configure"
#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
int main() {
-} $ac_kw foo() {
+switch (0) case 0: case (sizeof (long long) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1675: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1714: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_c_inline=$ac_kw; break
+ ac_cv_sizeof_long_long=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest*
+ if test x$ac_cv_sizeof_long_long != x ; then break; fi
done
fi
-echo "$ac_t""$ac_cv_c_inline" 1>&6
-case "$ac_cv_c_inline" in
- inline | yes) ;;
- no) cat >> confdefs.h <<\EOF
-#define inline
-EOF
- ;;
- *) cat >> confdefs.h <<EOF
-#define inline $ac_cv_c_inline
+if test x$ac_cv_sizeof_long_long = x ; then
+ { echo "configure: error: cannot determine a size for long long" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
EOF
- ;;
-esac
-echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1701: checking for volatile" >&5
-if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
+
+fi
+if test $ac_cv_c___int64 = yes; then
+ echo $ac_n "checking size of __int64""... $ac_c" 1>&6
+echo "configure:1739: checking size of __int64" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 1706 "configure"
+#line 1745 "configure"
#include "confdefs.h"
+#include "confdefs.h"
+#include <sys/types.h>
+
int main() {
-volatile int foo;
+switch (0) case 0: case (sizeof (__int64) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:1713: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- gcc_cv_c_volatile=yes
+ ac_cv_sizeof___int64=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_c_volatile=no
fi
rm -f conftest*
+ if test x$ac_cv_sizeof___int64 != x ; then break; fi
+done
+
fi
-echo "$ac_t""$gcc_cv_c_volatile" 1>&6
-if test $gcc_cv_c_volatile = yes ; then
- cat >> confdefs.h <<\EOF
-#define HAVE_VOLATILE 1
+if test x$ac_cv_sizeof___int64 = x ; then
+ { echo "configure: error: cannot determine a size for __int64" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof___int64" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF___INT64 $ac_cv_sizeof___int64
EOF
-fi
+fi
-echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1735: checking for long double" >&5
-if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
+echo $ac_n "checking execution character set""... $ac_c" 1>&6
+echo "configure:1780: checking execution character set" >&5
+if eval "test \"`echo '$''{'ac_cv_c_charset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$GCC" = yes; then
- gcc_cv_c_long_double=yes
-else
-cat > conftest.$ac_ext <<EOF
-#line 1743 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 1785 "configure"
#include "confdefs.h"
-
-int main() {
-/* The Stardent Vistra knows sizeof(long double), but does not support it. */
-long double foo = 0.0;
-/* On Ultrix 4.3 cc, long double is 4 and double is 8. */
-switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
-; return 0; }
+#if '\n' == 0x0A && ' ' == 0x20 && '0' == 0x30 \
+ && 'A' == 0x41 && 'a' == 0x61 && '!' == 0x21
+ASCII
+#endif
EOF
-if { (eval echo configure:1753: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_c_long_double=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "ASCII" >/dev/null 2>&1; then
rm -rf conftest*
- gcc_cv_c_long_double=no
+ ac_cv_c_charset=ASCII
fi
rm -f conftest*
+
+ if test x${ac_cv_c_charset+set} != xset; then
+ cat > conftest.$ac_ext <<EOF
+#line 1801 "configure"
+#include "confdefs.h"
+#if '\n' == 0x15 && ' ' == 0x40 && '0' == 0xF0 \
+ && 'A' == 0xC1 && 'a' == 0x81 && '!' == 0x5A
+EBCDIC
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "EBCDIC" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_c_charset=EBCDIC
fi
+rm -f conftest*
+
+ fi
+ if test x${ac_cv_c_charset+set} != xset; then
+ ac_cv_c_charset=unknown
+ fi
fi
-echo "$ac_t""$gcc_cv_c_long_double" 1>&6
-if test $gcc_cv_c_long_double = yes; then
+echo "$ac_t""$ac_cv_c_charset" 1>&6
+if test $ac_cv_c_charset = unknown; then
+ { echo "configure: error: *** Cannot determine host character set." 1>&2; exit 1; }
+elif test $ac_cv_c_charset = EBCDIC; then
cat >> confdefs.h <<\EOF
-#define HAVE_LONG_DOUBLE 1
+#define HOST_EBCDIC 1
EOF
fi
-echo $ac_n "checking for long long int""... $ac_c" 1>&6
-echo "configure:1775: checking for long long int" >&5
-if eval "test \"`echo '$''{'ac_cv_c_long_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+# -----------------
+# Find Ada compiler
+# -----------------
+
+# See if GNAT has been installed
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
else
- cat > conftest.$ac_ext <<EOF
-#line 1780 "configure"
-#include "confdefs.h"
+ ac_tool_prefix=
+fi
-int main() {
-long long int i;
-; return 0; }
-EOF
-if { (eval echo configure:1787: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_long_long=yes
+
+# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1846: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_long_long=no
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-rm -f conftest*
+fi
+GNATBIND="$ac_cv_prog_GNATBIND"
+if test -n "$GNATBIND"; then
+ echo "$ac_t""$GNATBIND" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-echo "$ac_t""$ac_cv_c_long_long" 1>&6
- if test $ac_cv_c_long_long = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_LONG_LONG 1
-EOF
- fi
-echo $ac_n "checking for __int64""... $ac_c" 1>&6
-echo "configure:1807: checking for __int64" >&5
-if eval "test \"`echo '$''{'ac_cv_c___int64'+set}'`\" = set"; then
+if test -z "$ac_cv_prog_GNATBIND"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "gnatbind", so it can be a program name with args.
+set dummy gnatbind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1878: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1812 "configure"
-#include "confdefs.h"
+ if test -n "$GNATBIND"; then
+ ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GNATBIND="gnatbind"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no"
+fi
+fi
+GNATBIND="$ac_cv_prog_GNATBIND"
+if test -n "$GNATBIND"; then
+ echo "$ac_t""$GNATBIND" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
-int main() {
-__int64 i;
-; return 0; }
-EOF
-if { (eval echo configure:1819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c___int64=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c___int64=no
+ GNATBIND="no"
fi
-rm -f conftest*
fi
-echo "$ac_t""$ac_cv_c___int64" 1>&6
- if test $ac_cv_c___int64 = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE___INT64 1
+echo $ac_n "checking for compiler driver that understands Ada""... $ac_c" 1>&6
+echo "configure:1911: checking for compiler driver that understands Ada" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_adac'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
EOF
+gcc_cv_prog_adac=no
+# Have to do ac_tool_prefix and user overrides by hand.
+for cand in ${ADAC+"$ADAC"} ${CC+"$CC"} \
+ ${ac_tool_prefix}gcc gcc \
+ ${ac_tool_prefix}cc cc \
+ ${ac_tool_prefix}gnatgcc gnatgcc \
+ ${ac_tool_prefix}gnatcc gnatcc \
+ ${ac_tool_prefix}adagcc adagcc \
+ ${ac_tool_prefix}adacc adacc ; do
+ # There is a bug in all released versions of GCC which causes the
+ # driver to exit successfully when the appropriate language module
+ # has not been installed. This is fixed in 2.95.4, 3.0.2, and 3.1.
+ # Therefore we must check for the error message as well as an
+ # unsuccessful exit.
+ errors=`($cand -c conftest.adb) 2>&1 || echo failure`
+ if test x"$errors" = x; then
+ gcc_cv_prog_adac=$cand
+ break
+ fi
+done
+rm -f conftest.*
+fi
+
+echo "$ac_t""$gcc_cv_prog_adac" 1>&6
+ADAC=$gcc_cv_prog_adac
+
+
+if test x$GNATBIND != xno && test x$ADAC != xno; then
+ have_gnat=yes
+else
+ have_gnat=no
+fi
- fi
-echo $ac_n "checking for built-in _Bool""... $ac_c" 1>&6
-echo "configure:1840: checking for built-in _Bool" >&5
-if eval "test \"`echo '$''{'gcc_cv_c__bool'+set}'`\" = set"; then
+if test x$have_gnat != xno ; then
+echo $ac_n "checking whether ${ADAC} accepts -Wno-long-long""... $ac_c" 1>&6
+echo "configure:1954: checking whether ${ADAC} accepts -Wno-long-long" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_adac_no_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1845 "configure"
-#include "confdefs.h"
-
-int main() {
-_Bool foo;
-; return 0; }
+ cat >conftest.adb <<EOF
+procedure conftest is begin null; end conftest;
EOF
-if { (eval echo configure:1852: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_c__bool=yes
+if $ADAC -Wno-long-long -c conftest.adb 1>&5 2>&5 ; then
+ ac_cv_prog_adac_no_long_long=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_c__bool=no
+ ac_cv_prog_adac_no_long_long=no
fi
rm -f conftest*
+fi
+echo "$ac_t""$ac_cv_prog_adac_no_long_long" 1>&6
+else
+ ac_cv_prog_adac_no_long_long=yes
fi
-echo "$ac_t""$gcc_cv_c__bool" 1>&6
-if test $gcc_cv_c__bool = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE__BOOL 1
-EOF
+# ---------------------
+# Warnings and checking
+# ---------------------
+strict1_warn=
+if test $ac_cv_prog_cc_no_long_long = yes && \
+ test $ac_cv_prog_adac_no_long_long = yes ; then
+ strict1_warn="-pedantic -Wno-long-long"
fi
-# sizeof(char) is 1 by definition.
-echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:1876: checking size of short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 1882 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
+# If the native compiler is GCC, we can enable warnings even in stage1.
+# That's useful for people building cross-compilers, or just running a
+# quick `make'.
+warn_cflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
+fi
-int main() {
-switch (0) case 0: case (sizeof (short) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:1892: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_short=$ac_size
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+# Check whether --enable-werror or --disable-werror was given.
+if test "${enable_werror+set}" = set; then
+ enableval="$enable_werror"
+ :
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+ enable_werror=yes
fi
-rm -f conftest*
- if test x$ac_cv_sizeof_short != x ; then break; fi
-done
+if test x$enable_werror = xyes ; then
+ WERROR=-Werror
fi
-if test x$ac_cv_sizeof_short = x ; then
- { echo "configure: error: cannot determine a size for short" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_SHORT $ac_cv_sizeof_short
-EOF
+# Enable expensive internal checks
+# Check whether --enable-checking or --disable-checking was given.
+if test "${enable_checking+set}" = set; then
+ enableval="$enable_checking"
+ ac_checking=
+ac_tree_checking=
+ac_rtl_checking=
+ac_rtlflag_checking=
+ac_gc_checking=
+ac_gc_always_collect=
+case "${enableval}" in
+yes) ac_checking=1 ; ac_tree_checking=1 ; ac_gc_checking=1 ;
+ ac_rtlflag_checking=1 ;;
+no) ;;
+*) IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="$IFS,"
+ set fnord $enableval; shift
+ IFS="$ac_save_IFS"
+ for check
+ do
+ case $check in
+ misc) ac_checking=1 ;;
+ tree) ac_tree_checking=1 ;;
+ rtlflag) ac_rtlflag_checking=1 ;;
+ rtl) ac_rtl_checking=1 ;;
+ gc) ac_gc_checking=1 ;;
+ gcac) ac_gc_always_collect=1 ;;
+ valgrind) ac_checking_valgrind=1 ;;
+ *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
+ esac
+ done
+ ;;
+esac
-echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1915: checking size of int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 1921 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
+ # Enable some checks by default for development versions of GCC
+ac_checking=1; ac_tree_checking=1; ac_gc_checking=1; ac_rtlflag_checking=1;
+fi
+nocommon_flag=""
+if test x$ac_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_CHECKING 1
+EOF
-int main() {
-switch (0) case 0: case (sizeof (int) == $ac_size):;
-; return 0; }
+ nocommon_flag=-fno-common
+fi
+
+if test x$ac_tree_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_TREE_CHECKING 1
EOF
-if { (eval echo configure:1931: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_int=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+
fi
-rm -f conftest*
- if test x$ac_cv_sizeof_int != x ; then break; fi
-done
+if test x$ac_rtl_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_RTL_CHECKING 1
+EOF
fi
+if test x$ac_rtlflag_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_RTL_FLAG_CHECKING 1
+EOF
-if test x$ac_cv_sizeof_int = x ; then
- { echo "configure: error: cannot determine a size for int" 1>&2; exit 1; }
fi
-echo "$ac_t""$ac_cv_sizeof_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_INT $ac_cv_sizeof_int
+if test x$ac_gc_checking != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_GC_CHECKING 1
EOF
+fi
+if test x$ac_gc_always_collect != x ; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_GC_ALWAYS_COLLECT 1
+EOF
-echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:1954: checking size of long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
+fi
+valgrind_path_defines=
+valgrind_command=
+if test x$ac_checking_valgrind != x ; then
+ # It is certainly possible that there's valgrind but no valgrind.h.
+ # GCC relies on making annotations so we must have both.
+ echo $ac_n "checking for VALGRIND_DISCARD in <memcheck.h>""... $ac_c" 1>&6
+echo "configure:2092: checking for VALGRIND_DISCARD in <memcheck.h>" >&5
cat > conftest.$ac_ext <<EOF
-#line 1960 "configure"
-#include "confdefs.h"
+#line 2094 "configure"
#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (long) == $ac_size):;
-; return 0; }
+#include <memcheck.h>
+#ifndef VALGRIND_DISCARD
+#error VALGRIND_DISCARD not defined
+#endif
EOF
-if { (eval echo configure:1970: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- ac_cv_sizeof_long=$ac_size
+ gcc_cv_header_memcheck_h=yes
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_header_memcheck_h=no
fi
rm -f conftest*
- if test x$ac_cv_sizeof_long != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_long = x ; then
- { echo "configure: error: cannot determine a size for long" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
-EOF
-
-
-if test $ac_cv_c_long_long = yes; then
- echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:1994: checking size of long long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
+ echo "$ac_t""$gcc_cv_header_memcheck_h" 1>&6
+ ac_safe=`echo "valgrind.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for valgrind.h""... $ac_c" 1>&6
+echo "configure:2118: checking for valgrind.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 2000 "configure"
-#include "confdefs.h"
+#line 2123 "configure"
#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (long long) == $ac_size):;
-; return 0; }
+#include <valgrind.h>
EOF
-if { (eval echo configure:2010: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- ac_cv_sizeof_long_long=$ac_size
+ eval "ac_cv_header_$ac_safe=yes"
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
- if test x$ac_cv_sizeof_long_long != x ; then break; fi
-done
-
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ have_valgrind_h=yes
+else
+ echo "$ac_t""no" 1>&6
+have_valgrind_h=no
fi
-if test x$ac_cv_sizeof_long_long = x ; then
- { echo "configure: error: cannot determine a size for long long" 1>&2; exit 1; }
+ # Extract the first word of "valgrind", so it can be a program name with args.
+set dummy valgrind; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2153: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_valgrind_path'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$valgrind_path" in
+ /*)
+ ac_cv_path_valgrind_path="$valgrind_path" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if $ac_dir/$ac_word --version | grep valgrind- >/dev/null 2>&1; then
+ ac_cv_path_valgrind_path="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
fi
-echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+valgrind_path="$ac_cv_path_valgrind_path"
+if test -n "$valgrind_path"; then
+ echo "$ac_t""$valgrind_path" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "x$valgrind_path" = "x" || (test $have_valgrind_h = no && test $gcc_cv_header_memcheck_h = no); then
+ { echo "configure: error: *** Can't find both valgrind and valgrind.h/memcheck.h" 1>&2; exit 1; }
+ fi
+ valgrind_path_defines=-DVALGRIND_PATH='\"'$valgrind_path'\"'
+ valgrind_command="$valgrind_path -q"
+ cat >> confdefs.h <<\EOF
+#define ENABLE_VALGRIND_CHECKING 1
+EOF
+
+ if test $gcc_cv_header_memcheck_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MEMCHECK_H 1
EOF
+ fi
+fi
+
+
+
+# Enable code coverage collection
+# Check whether --enable-coverage or --disable-coverage was given.
+if test "${enable_coverage+set}" = set; then
+ enableval="$enable_coverage"
+ case "${enableval}" in
+yes|noopt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -O0 -DSELF_COVERAGE=1"
+ ;;
+opt)
+ coverage_flags="-fprofile-arcs -ftest-coverage -O2 -DSELF_COVERAGE=2"
+ ;;
+*)
+ { echo "configure: error: unknown coverage setting $enableval" 1>&2; exit 1; }
+ ;;
+esac
+else
+ coverage_flags=""
+fi
+
-fi
-if test $ac_cv_c___int64 = yes; then
- echo $ac_n "checking size of __int64""... $ac_c" 1>&6
-echo "configure:2035: checking size of __int64" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof___int64'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 2041 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
+# -------------------------------
+# Miscenalleous configure options
+# -------------------------------
-int main() {
-switch (0) case 0: case (sizeof (__int64) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:2051: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof___int64=$ac_size
+# With stabs
+# Check whether --with-stabs or --without-stabs was given.
+if test "${with_stabs+set}" = set; then
+ withval="$with_stabs"
+ stabs="$with_stabs"
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+ stabs=no
fi
-rm -f conftest*
- if test x$ac_cv_sizeof___int64 != x ; then break; fi
-done
-fi
-if test x$ac_cv_sizeof___int64 = x ; then
- { echo "configure: error: cannot determine a size for __int64" 1>&2; exit 1; }
+# With ELF
+# Check whether --with-elf or --without-elf was given.
+if test "${with_elf+set}" = set; then
+ withval="$with_elf"
+ elf="$with_elf"
+else
+ elf=no
fi
-echo "$ac_t""$ac_cv_sizeof___int64" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF___INT64 $ac_cv_sizeof___int64
-EOF
+# Determine whether or not multilibs are enabled.
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ :
+else
+ enable_multilib=yes
fi
-echo $ac_n "checking execution character set""... $ac_c" 1>&6
-echo "configure:2076: checking execution character set" >&5
-if eval "test \"`echo '$''{'ac_cv_c_charset'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2081 "configure"
-#include "confdefs.h"
-#if '\n' == 0x0A && ' ' == 0x20 && '0' == 0x30 \
- && 'A' == 0x41 && 'a' == 0x61 && '!' == 0x21
-ASCII
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "ASCII" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_c_charset=ASCII
+
+
+# Enable __cxa_atexit for C++.
+# Check whether --enable-__cxa_atexit or --disable-__cxa_atexit was given.
+if test "${enable___cxa_atexit+set}" = set; then
+ enableval="$enable___cxa_atexit"
+ :
fi
-rm -f conftest*
- if test x${ac_cv_c_charset+set} != xset; then
- cat > conftest.$ac_ext <<EOF
-#line 2097 "configure"
-#include "confdefs.h"
-#if '\n' == 0x15 && ' ' == 0x40 && '0' == 0xF0 \
- && 'A' == 0xC1 && 'a' == 0x81 && '!' == 0x5A
-EBCDIC
-#endif
+if test x$enable___cxa_atexit = xyes; then
+ cat >> confdefs.h <<\EOF
+#define DEFAULT_USE_CXA_ATEXIT 1
EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "EBCDIC" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_c_charset=EBCDIC
-fi
-rm -f conftest*
- fi
- if test x${ac_cv_c_charset+set} != xset; then
- ac_cv_c_charset=unknown
- fi
fi
-
-echo "$ac_t""$ac_cv_c_charset" 1>&6
-if test $ac_cv_c_charset = unknown; then
- { echo "configure: error: *** Cannot determine host character set." 1>&2; exit 1; }
-elif test $ac_cv_c_charset = EBCDIC; then
+
+# Enable Multibyte Characters for C/C++
+# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
+if test "${enable_c_mbchar+set}" = set; then
+ enableval="$enable_c_mbchar"
+ if test x$enable_c_mbchar != xno; then
cat >> confdefs.h <<\EOF
-#define HOST_EBCDIC 1
+#define MULTIBYTE_CHARS 1
EOF
fi
+fi
-# If the native compiler is GCC, we can enable warnings even in stage1.
-# That's useful for people building cross-compilers, or just running a
-# quick `make'.
-warn_cflags=
-if test "x$GCC" = "xyes"; then
- warn_cflags='$(GCC_WARN_CFLAGS)'
+
+# Enable threads
+# Pass with no value to take the default
+# Pass with a value to specify a thread package
+# Check whether --enable-threads or --disable-threads was given.
+if test "${enable_threads+set}" = set; then
+ enableval="$enable_threads"
+ :
+else
+ enable_threads=''
fi
-# Stage specific cflags for build.
-stage1_cflags=
-case $build in
-vax-*-*)
- if test x$GCC = xyes
- then
- stage1_cflags="-Wa,-J"
- else
- stage1_cflags="-J"
- fi
- ;;
-powerpc-*-darwin*)
- # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
- # sources; use -no-cpp-precomp to get to GNU cpp.
- # Apple's GCC has bugs in designated initializer handling, so disable
- # that too.
- stage1_cflags="-no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
- ;;
+enable_threads_flag=$enable_threads
+# Check if a valid thread package
+case x${enable_threads_flag} in
+ x | xno)
+ # No threads
+ target_thread_file='single'
+ ;;
+ xyes)
+ # default
+ target_thread_file=''
+ ;;
+ xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
+ xsolaris | xwin32 | xdce | xrtems| xvxworks | xaix)
+ target_thread_file=$enable_threads_flag
+ ;;
+ *)
+ echo "$enable_threads is an unknown thread package" 1>&2
+ exit 1
+ ;;
esac
-
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2158: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftestmake <<\EOF
-all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
+# Check whether --enable-objc-gc or --disable-objc-gc was given.
+if test "${enable_objc_gc+set}" = set; then
+ enableval="$enable_objc_gc"
+ if test x$enable_objc_gc = xno; then
+ objc_boehm_gc=''
else
- eval ac_cv_prog_make_${ac_make}_set=no
+ objc_boehm_gc=1
fi
-rm -f conftestmake
+else
+ objc_boehm_gc=''
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
+
+
+# Check whether --with-dwarf2 or --without-dwarf2 was given.
+if test "${with_dwarf2+set}" = set; then
+ withval="$with_dwarf2"
+ dwarf2="$with_dwarf2"
else
- echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
+ dwarf2=no
fi
-echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:2186: checking whether a default assembler was specified" >&5
-if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
- if test x"$gas_flag" = x"no"; then
- echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
- else
- echo "$ac_t""yes ($DEFAULT_ASSEMBLER - GNU as)" 1>&6
- fi
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+
+ case $enable_shared in
+ yes | no) ;;
+ *)
+ enable_shared=no
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "Xgcc" || test "X$pkg" = "Xlibgcc"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+ esac
+
else
- echo "$ac_t""no" 1>&6
+ enable_shared=yes
fi
-echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:2198: checking whether a default linker was specified" >&5
-if test x"${DEFAULT_LINKER+set}" = x"set"; then
- if test x"$gnu_ld_flag" = x"no"; then
- echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
- else
- echo "$ac_t""yes ($DEFAULT_LINKER - GNU ld)" 1>&6
- fi
+
+
+# Check whether --with-sysroot or --without-sysroot was given.
+if test "${with_sysroot+set}" = set; then
+ withval="$with_sysroot"
+
+ case ${with_sysroot} in
+ yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_alias}/sys-root' ;;
+ *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
+ esac
+
+ TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
+ CROSS_SYSTEM_HEADER_DIR='$(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR)'
+
+ if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ else
+ test_prefix=$exec_prefix
+ fi
+ case ${TARGET_SYSTEM_ROOT} in
+ "${test_prefix}"|"${test_prefix}/"*|\
+ '${exec_prefix}'|'${exec_prefix}/'*)
+ t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
+ TARGET_SYSTEM_ROOT_DEFINE="$t"
+ ;;
+ esac
+
else
- echo "$ac_t""no" 1>&6
+
+ TARGET_SYSTEM_ROOT=
+ TARGET_SYSTEM_ROOT_DEFINE=
+ CROSS_SYSTEM_HEADER_DIR='$(gcc_tooldir)/sys-include'
+
fi
-echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:2210: checking for GNU C library" >&5
-if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
+
+
+
+
+# -------------------------
+# Checks for other programs
+# -------------------------
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:2410: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 2215 "configure"
-#include "confdefs.h"
-#include <features.h>
-int main() {
-
-#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
-#error Not a GNU C library system
-#endif
-; return 0; }
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
EOF
-if { (eval echo configure:2225: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_glibc=yes
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_glibc=no
+ eval ac_cv_prog_make_${ac_make}_set=no
fi
-rm -f conftest*
+rm -f conftestmake
fi
-
-echo "$ac_t""$gcc_cv_glibc" 1>&6
-if test $gcc_cv_glibc = yes; then
- cat >> confdefs.h <<\EOF
-#define _GNU_SOURCE 1
-EOF
-
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
fi
+
# Find some useful tools
-for ac_prog in mawk gawk nawk awk
+for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2251: checking for $ac_word" >&5
+echo "configure:2443: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:2281: checking whether ln works" >&5
+echo "configure:2473: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2313: checking whether ln -s works" >&5
+echo "configure:2505: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2347: checking for $ac_word" >&5
+echo "configure:2539: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2385: checking for a BSD compatible install" >&5
+echo "configure:2577: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- # OSF/1 installbsd also uses dspmsg, but is usable.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ # OSF/1 installbsd also uses dspmsg, but is usable.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# See if we have the mktemp command.
+# Extract the first word of "mktemp", so it can be a program name with args.
+set dummy mktemp; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2631: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$have_mktemp_command"; then
+ ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_have_mktemp_command="yes"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
+fi
+fi
+have_mktemp_command="$ac_cv_prog_have_mktemp_command"
+if test -n "$have_mktemp_command"; then
+ echo "$ac_t""$have_mktemp_command" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+# Do we have a single-tree copy of texinfo?
+if test -f $srcdir/../texinfo/Makefile.in; then
+ MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
+ gcc_cv_prog_makeinfo_modern=yes
+ echo "$ac_t""Using makeinfo from the unified source tree." 1>&6
+else
+ # See if makeinfo has been installed and is modern enough
+ # that we can use it.
+ # Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2670: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -n "$MAKEINFO"; then
+ # Found it, now check the version.
+ echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
+echo "configure:2699: checking for modern makeinfo" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_prog_version=`$MAKEINFO --version 2>&1 |
+ sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
+ echo "configure:2705: version of makeinfo is $ac_prog_version" >&5
+ case $ac_prog_version in
+ '') gcc_cv_prog_makeinfo_modern=no;;
+ 4.[2-9]*)
+ gcc_cv_prog_makeinfo_modern=yes;;
+ *) gcc_cv_prog_makeinfo_modern=no;;
+ esac
+
+fi
+
+echo "$ac_t""$gcc_cv_prog_makeinfo_modern" 1>&6
+else
+ gcc_cv_prog_makeinfo_modern=no
+fi
+
+fi
+
+if test $gcc_cv_prog_makeinfo_modern = no; then
+ echo "configure: warning:
+*** Makeinfo is missing or too old.
+*** Info documentation will not be built." 1>&2
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+fi
+
+# Is pod2man recent enough to regenerate manpages?
+echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
+echo "configure:2733: checking for recent Pod::Man" >&5
+if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
+ echo "$ac_t""yes" 1>&6
+ GENERATED_MANPAGES=generated-manpages
+else
+ echo "$ac_t""no" 1>&6
+ GENERATED_MANPAGES=
+fi
+
+# How about lex?
+if test -f $srcdir/../flex/skel.c; then
+ FLEX='$(objdir)/../flex/flex'
+else
+ # Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2749: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_FLEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_FLEX" && ac_cv_prog_FLEX="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing flex"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+ echo "$ac_t""$FLEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+# Bison?
+# The -L switch is so bison can find its skeleton file.
+if test -f $srcdir/../bison/bison.simple; then
+ BISON='$(objdir)/../bison/bison -L $(srcdir)/../bison/'
+else
+ # Extract the first word of "bison", so it can be a program name with args.
+set dummy bison; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2786: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_BISON="bison"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_BISON" && ac_cv_prog_BISON="${CONFIG_SHELL-/bin/sh} ${srcdir}/../missing bison"
+fi
+fi
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+ echo "$ac_t""$BISON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+# --------------------
+# Checks for C headers
+# --------------------
+
+echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
+echo "configure:2820: checking for GNU C library" >&5
+if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2825 "configure"
+#include "confdefs.h"
+#include <features.h>
+int main() {
+#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
+#error Not a GNU C library system
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:2835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_glibc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_glibc=no
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
+rm -f conftest*
fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+echo "$ac_t""$gcc_cv_glibc" 1>&6
+if test $gcc_cv_glibc = yes; then
+ cat >> confdefs.h <<\EOF
+#define _GNU_SOURCE 1
+EOF
+fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2436: checking for ANSI C header files" >&5
+echo "configure:2856: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2441 "configure"
+#line 2861 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2466 "configure"
+#line 2886 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2484 "configure"
+#line 2904 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2505 "configure"
+#line 2925 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:2540: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2960: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2545 "configure"
+#line 2965 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2974: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking for working stdbool.h""... $ac_c" 1>&6
-echo "configure:2575: checking for working stdbool.h" >&5
+echo "configure:2995: checking for working stdbool.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdbool_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2580 "configure"
+#line 3000 "configure"
#include "confdefs.h"
#include <stdbool.h>
int main() {
bool foo = false;
; return 0; }
EOF
-if { (eval echo configure:2587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3007: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_stdbool_h=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2608: checking whether string.h and strings.h may both be included" >&5
+echo "configure:3028: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2613 "configure"
+#line 3033 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:2621: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2642: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:3062: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2647 "configure"
+#line 3067 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2663: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3083: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
fcntl.h unistd.h sys/file.h sys/time.h \
sys/resource.h sys/param.h sys/times.h sys/stat.h \
- direct.h malloc.h langinfo.h
+ direct.h malloc.h langinfo.h ldfcn.h wchar.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2690: checking for $ac_hdr" >&5
+echo "configure:3110: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2695 "configure"
+#line 3115 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3120: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2730: checking for thread.h" >&5
+echo "configure:3150: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2735 "configure"
+#line 3155 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2764: checking for pthread.h" >&5
+echo "configure:3184: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2769 "configure"
+#line 3189 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2774: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# These tests can't be done till we know if we have limits.h.
echo $ac_n "checking for CHAR_BIT""... $ac_c" 1>&6
-echo "configure:2799: checking for CHAR_BIT" >&5
+echo "configure:3219: checking for CHAR_BIT" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_char_bit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2804 "configure"
+#line 3224 "configure"
#include "confdefs.h"
#ifdef HAVE_LIMITS_H
#include <limits.h>
rm -rf conftest*
gcc_cv_decl_char_bit=no
fi
-rm -f conftest*
-
-
-fi
-
-echo "$ac_t""$gcc_cv_decl_char_bit" 1>&6
-if test $gcc_cv_decl_char_bit = no; then
- echo $ac_n "checking number of bits in a byte""... $ac_c" 1>&6
-echo "configure:2829: checking number of bits in a byte" >&5
-if eval "test \"`echo '$''{'gcc_cv_c_nbby'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- i=8
- gcc_cv_c_nbby=
- while test $i -lt 65; do
- cat > conftest.$ac_ext <<EOF
-#line 2837 "configure"
-#include "confdefs.h"
-
-int main() {
-switch(0) {
- case (unsigned char)((unsigned long)1 << $i) == ((unsigned long)1 << $i):
- case (unsigned char)((unsigned long)1<<($i-1)) == ((unsigned long)1<<($i-1)):
- ; }
-; return 0; }
-EOF
-if { (eval echo configure:2847: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_c_nbby=$i; break
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- i=`expr $i + 1`
- done
- test -z "$gcc_cv_c_nbby" && gcc_cv_c_nbby=failed
-
-fi
-
-echo "$ac_t""$gcc_cv_c_nbby" 1>&6
-if test $gcc_cv_c_nbby = failed; then
- { echo "configure: error: cannot determine number of bits in a byte" 1>&2; exit 1; }
-else
- cat >> confdefs.h <<EOF
-#define CHAR_BIT $gcc_cv_c_nbby
-EOF
-
-fi
-fi
-echo $ac_n "checking byte ordering""... $ac_c" 1>&6
-echo "configure:2872: checking byte ordering" >&5
-if eval "test \"`echo '$''{'ac_cv_c_compile_endian'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_c_compile_endian=unknown
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 2886 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_LIMITS_H
-# include <limits.h>
-#endif
-/* This structure must have no internal padding. */
- struct {
- char prefix[sizeof "\nendian:" - 1];
- short word;
- char postfix[2];
- } tester = {
- "\nendian:",
-#if SIZEOF_SHORT == 4
- ('A' << (CHAR_BIT * 3)) | ('B' << (CHAR_BIT * 2)) |
-#endif
- ('A' << CHAR_BIT) | 'B',
- 'X', '\n'
-};
-EOF
-if { (eval echo configure:2906: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- od -c conftest.o |
- sed 's/^[0-7]*[ ]*/ /
- s/\*/./g
- s/ \\n/*/g
- s/ [0-9][0-9][0-9]/./g
- s/ \\[^ ]/./g' |
- tr -d '
- ' | tr -s '*' '
-' | fold | sed '$a\
-' > conftest.dmp
- if grep 'endian:AB' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_compile_endian=big-endian
- elif grep 'endian:BA' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_compile_endian=little-endian
- fi
-fi
-rm -rf conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-
-fi
-
-echo "$ac_t""$ac_cv_c_compile_endian" 1>&6
-if test $ac_cv_c_compile_endian = unknown; then
- { echo "configure: error: *** unable to determine endianness" 1>&2; exit 1; }
-elif test $ac_cv_c_compile_endian = big-endian; then
- cat >> confdefs.h <<\EOF
-#define HOST_WORDS_BIG_ENDIAN 1
-EOF
-
-fi
-
-echo $ac_n "checking floating point format""... $ac_c" 1>&6
-echo "configure:2945: checking floating point format" >&5
-if eval "test \"`echo '$''{'ac_cv_c_float_format'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 2958 "configure"
-#include "confdefs.h"
-/* This will not work unless sizeof(double) == 8. */
-extern char sizeof_double_must_be_8 [sizeof(double) == 8 ? 1 : -1];
-
-/* This structure must have no internal padding. */
-struct possibility {
- char prefix[8];
- double candidate;
- char postfix[8];
-};
-
-#define C(cand) { "\nformat:", cand, ":tamrof\n" }
-struct possibility table [] =
-{
- C( 3.25724264705901305206e+01), /* @@IEEEFP - IEEE 754 */
- C( 3.53802595280598432000e+18), /* D__float - VAX */
- C( 5.32201830133125317057e-19), /* D.PDP-10 - PDP-10 - the dot is 0x13a */
- C( 1.77977764695171661377e+10), /* IBMHEXFP - s/390 format, ascii */
- C(-5.22995989424860458374e+10) /* IBMHEXFP - s/390 format, EBCDIC */
-};
-EOF
-if { (eval echo configure:2980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- od -c conftest.o |
- sed 's/^[0-7]*[ ]*/ /
- s/\*/./g
- s/ \\n/*/g
- s/ [0-9][0-9][0-9]/./g
- s/ \\[^ ]/./g' |
- tr -d '
- ' | tr -s '*' '
-' | fold | sed '$a\
-' > conftest.dmp
- if grep 'format:.@IEEEF.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (big-endian)'
- elif grep 'format:.I@@PFE.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (big-endian)'
- elif grep 'format:.FEEEI@.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (little-endian)'
- elif grep 'format:.EFP@@I.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IEEE (little-endian)'
- elif grep 'format:.__floa.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='VAX D-float'
- elif grep 'format:..PDP-1.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='PDP-10'
- elif grep 'format:.BMHEXF.:tamrof' conftest.dmp >/dev/null 2>&1; then
- ac_cv_c_float_format='IBM 370 hex'
- else
- { echo "configure: error: Unknown floating point format" 1>&2; exit 1; }
- fi
-else
- { echo "configure: error: compile failed" 1>&2; exit 1; }
-fi
-rm -rf conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-
-fi
-
-echo "$ac_t""$ac_cv_c_float_format" 1>&6
-# IEEE is the default format. If the float endianness isn't the same
-# as the integer endianness, we have to set FLOAT_WORDS_BIG_ENDIAN
-# (which is a tristate: yes, no, default). This is only an issue with
-# IEEE; the other formats are only supported by a few machines each,
-# all with the same endianness.
-format=
-fbigend=
-case $ac_cv_c_float_format in
- 'IEEE (big-endian)' )
- if test $ac_cv_c_compile_endian = little-endian; then
- fbigend=1
- fi
- ;;
- 'IEEE (little-endian)' )
- if test $ac_cv_c_compile_endian = big-endian; then
- fbigend=0
- fi
- ;;
- 'VAX D-float' )
- format=VAX_FLOAT_FORMAT
- ;;
- 'PDP-10' )
- format=PDP10_FLOAT_FORMAT
- ;;
- 'IBM 370 hex' )
- format=IBM_FLOAT_FORMAT
- ;;
-esac
-if test -n "$format"; then
- cat >> confdefs.h <<EOF
-#define HOST_FLOAT_FORMAT $format
-EOF
-
-fi
-if test -n "$fbigend"; then
- cat >> confdefs.h <<EOF
-#define HOST_FLOAT_WORDS_BIG_ENDIAN $fbigend
-EOF
-
-fi
-
-
-# See if we have the mktemp command.
-# Extract the first word of "mktemp", so it can be a program name with args.
-set dummy mktemp; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3069: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$have_mktemp_command"; then
- ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_have_mktemp_command="yes"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
-fi
-fi
-have_mktemp_command="$ac_cv_prog_have_mktemp_command"
-if test -n "$have_mktemp_command"; then
- echo "$ac_t""$have_mktemp_command" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-# Do we have a single-tree copy of texinfo?
-if test -f $srcdir/../texinfo/Makefile.in; then
- MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
- gcc_cv_prog_makeinfo_modern=yes
- echo "$ac_t""Using makeinfo from the unified source tree." 1>&6
-else
- # See if makeinfo has been installed and is modern enough
- # that we can use it.
- # Extract the first word of "makeinfo", so it can be a program name with args.
-set dummy makeinfo; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3108: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$MAKEINFO"; then
- ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_MAKEINFO="makeinfo"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-MAKEINFO="$ac_cv_prog_MAKEINFO"
-if test -n "$MAKEINFO"; then
- echo "$ac_t""$MAKEINFO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+rm -f conftest*
-if test -n "$MAKEINFO"; then
- # Found it, now check the version.
- echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:3137: checking for modern makeinfo" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_prog_version=`$MAKEINFO --version 2>&1 |
- sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:3143: version of makeinfo is $ac_prog_version" >&5
- case $ac_prog_version in
- '') gcc_cv_prog_makeinfo_modern=no;;
- 4.[1-9]*)
- gcc_cv_prog_makeinfo_modern=yes;;
- *) gcc_cv_prog_makeinfo_modern=no;;
- esac
fi
-echo "$ac_t""$gcc_cv_prog_makeinfo_modern" 1>&6
+echo "$ac_t""$gcc_cv_decl_char_bit" 1>&6
+if test $gcc_cv_decl_char_bit = no; then
+ echo $ac_n "checking number of bits in a byte""... $ac_c" 1>&6
+echo "configure:3249: checking number of bits in a byte" >&5
+if eval "test \"`echo '$''{'gcc_cv_c_nbby'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- gcc_cv_prog_makeinfo_modern=no
-fi
-
-fi
+ i=8
+ gcc_cv_c_nbby=
+ while test $i -lt 65; do
+ cat > conftest.$ac_ext <<EOF
+#line 3257 "configure"
+#include "confdefs.h"
-if test $gcc_cv_prog_makeinfo_modern = no; then
- echo "configure: warning:
-*** Makeinfo is missing or too old.
-*** Info documentation will not be built." 1>&2
- BUILD_INFO=
+int main() {
+switch(0) {
+ case (unsigned char)((unsigned long)1 << $i) == ((unsigned long)1 << $i):
+ case (unsigned char)((unsigned long)1<<($i-1)) == ((unsigned long)1<<($i-1)):
+ ; }
+; return 0; }
+EOF
+if { (eval echo configure:3267: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_c_nbby=$i; break
else
- BUILD_INFO=info
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
+rm -f conftest*
+ i=`expr $i + 1`
+ done
+ test -z "$gcc_cv_c_nbby" && gcc_cv_c_nbby=failed
-# Is pod2man recent enough to regenerate manpages?
-echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
-echo "configure:3171: checking for recent Pod::Man" >&5
-if (perl -e 'use 1.10 Pod::Man') >/dev/null 2>&1; then
- echo "$ac_t""yes" 1>&6
- GENERATED_MANPAGES=generated-manpages
-else
- echo "$ac_t""no" 1>&6
- GENERATED_MANPAGES=
fi
-# How about lex?
-if test -f $srcdir/../flex/skel.c; then
- FLEX='$(objdir)/../flex/flex'
+echo "$ac_t""$gcc_cv_c_nbby" 1>&6
+if test $gcc_cv_c_nbby = failed; then
+ { echo "configure: error: cannot determine number of bits in a byte" 1>&2; exit 1; }
else
- # Extract the first word of "flex", so it can be a program name with args.
-set dummy flex; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3187: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+ cat >> confdefs.h <<EOF
+#define CHAR_BIT $gcc_cv_c_nbby
+EOF
+
+fi
+fi
+echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:3292: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$FLEX"; then
- ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+ ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 3299 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:3310: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 3314 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:3325: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_bigendian=yes
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_FLEX="flex"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_FLEX" && ac_cv_prog_FLEX="false"
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_bigendian=no
fi
+rm -f conftest*
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
-FLEX="$ac_cv_prog_FLEX"
-if test -n "$FLEX"; then
- echo "$ac_t""$FLEX" 1>&6
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+ echo $ac_n "cross-compiling... " 2>&6
else
- echo "$ac_t""no" 1>&6
+ cat > conftest.$ac_ext <<EOF
+#line 3345 "configure"
+#include "confdefs.h"
+main () {
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:3358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_bigendian=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_bigendian=yes
fi
-
+rm -fr conftest*
fi
-# Bison?
-# The -L switch is so bison can find its skeleton file.
-if test -f $srcdir/../bison/bison.simple; then
- BISON='$(objdir)/../bison/bison -L $(srcdir)/../bison/'
-else
- # Extract the first word of "bison", so it can be a program name with args.
-set dummy bison; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3224: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$BISON"; then
- ac_cv_prog_BISON="$BISON" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_BISON="bison"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_BISON" && ac_cv_prog_BISON="false"
fi
fi
-BISON="$ac_cv_prog_BISON"
-if test -n "$BISON"; then
- echo "$ac_t""$BISON" 1>&6
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = unknown; then
+echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
+echo "configure:3376: checking to probe for byte ordering" >&5
+
+cat >conftest.c <<EOF
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
+int main() { _ascii (); _ebcdic (); return 0; }
+EOF
+ if test -f conftest.c ; then
+ if ${CC-cc} ${CFLAGS} conftest.c -o conftest.o && test -f conftest.o ; then
+ if test `grep -l BIGenDianSyS conftest.o` ; then
+ echo $ac_n ' big endian probe OK, ' 1>&6
+ ac_cv_c_bigendian=yes
+ fi
+ if test `grep -l LiTTleEnDian conftest.o` ; then
+ echo $ac_n ' little endian probe OK, ' 1>&6
+ if test $ac_cv_c_bigendian = yes ; then
+ ac_cv_c_bigendian=unknown;
+ else
+ ac_cv_c_bigendian=no
+ fi
+ fi
+ echo $ac_n 'guessing bigendian ... ' >&6
+ fi
+ fi
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+fi
+if test $ac_cv_c_bigendian = yes; then
+ cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HOST_WORDS_BIG_ENDIAN 1
+EOF
+
+ BYTEORDER=4321
else
- echo "$ac_t""no" 1>&6
+ BYTEORDER=1234
fi
+cat >> confdefs.h <<EOF
+#define BYTEORDER $BYTEORDER
+EOF
+if test $ac_cv_c_bigendian = unknown; then
+ { echo "configure: error: unknown endianess - sorry" 1>&2; exit 1; }
fi
+
+# --------
+# UNSORTED
+# --------
+
+# Stage specific cflags for build.
+stage1_cflags=
+case $build in
+vax-*-*)
+ if test x$GCC = xyes
+ then
+ stage1_cflags="-Wa,-J"
+ else
+ stage1_cflags="-J"
+ fi
+ ;;
+powerpc-*-darwin*)
+ # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+ # sources; use -no-cpp-precomp to get to GNU cpp.
+ # Apple's GCC has bugs in designated initializer handling, so disable
+ # that too.
+ stage1_cflags="-no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+ ;;
+esac
+
+
# These libraries may be used by collect2.
# We may need a special search path to get them linked.
echo $ac_n "checking for collect2 libraries""... $ac_c" 1>&6
-echo "configure:3256: checking for collect2 libraries" >&5
+echo "configure:3456: checking for collect2 libraries" >&5
if eval "test \"`echo '$''{'gcc_cv_collect2_libs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
LIBS="$libs"
cat > conftest.$ac_ext <<EOF
-#line 3267 "configure"
+#line 3467 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldopen()
; return 0; }
EOF
-if { (eval echo configure:3278: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gcc_cv_collect2_libs="$libs"; break
else
esac
-# When building Ada code on Alpha, we need exc_resume which is usually in
-# -lexc. So test for it.
+# When building Ada code on Alpha, we need exc_resume which is usually in
+# -lexc. So test for it.
+save_LIBS="$LIBS"
+LIBS=
+
+echo $ac_n "checking for library containing exc_resume""... $ac_c" 1>&6
+echo "configure:3504: checking for library containing exc_resume" >&5
+if eval "test \"`echo '$''{'ac_cv_search_exc_resume'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_func_search_save_LIBS="$LIBS"
+ac_cv_search_exc_resume="no"
+cat > conftest.$ac_ext <<EOF
+#line 3511 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char exc_resume();
+
+int main() {
+exc_resume()
+; return 0; }
+EOF
+if { (eval echo configure:3522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_search_exc_resume="none required"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+test "$ac_cv_search_exc_resume" = "no" && for i in exc; do
+LIBS="-l$i $ac_func_search_save_LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3533 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char exc_resume();
+
+int main() {
+exc_resume()
+; return 0; }
+EOF
+if { (eval echo configure:3544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_cv_search_exc_resume="-l$i"
+break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+LIBS="$ac_func_search_save_LIBS"
+fi
+
+echo "$ac_t""$ac_cv_search_exc_resume" 1>&6
+if test "$ac_cv_search_exc_resume" != "no"; then
+ test "$ac_cv_search_exc_resume" = "none required" || LIBS="$ac_cv_search_exc_resume $LIBS"
+
+else :
+
+fi
+GNAT_LIBEXC="$LIBS"
+LIBS="$save_LIBS"
+
+
+# Some systems put ldexp and frexp in libm instead of libc; assume
+# they're both in the same place. jcf-dump needs them.
save_LIBS="$LIBS"
LIBS=
-echo $ac_n "checking for library containing exc_resume""... $ac_c" 1>&6
-echo "configure:3304: checking for library containing exc_resume" >&5
-if eval "test \"`echo '$''{'ac_cv_search_exc_resume'+set}'`\" = set"; then
+echo $ac_n "checking for library containing ldexp""... $ac_c" 1>&6
+echo "configure:3574: checking for library containing ldexp" >&5
+if eval "test \"`echo '$''{'ac_cv_search_ldexp'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
-ac_cv_search_exc_resume="no"
+ac_cv_search_ldexp="no"
cat > conftest.$ac_ext <<EOF
-#line 3311 "configure"
+#line 3581 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char exc_resume();
+char ldexp();
int main() {
-exc_resume()
+ldexp()
; return 0; }
EOF
-if { (eval echo configure:3322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ac_cv_search_exc_resume="none required"
+ ac_cv_search_ldexp="none required"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest*
-test "$ac_cv_search_exc_resume" = "no" && for i in exc; do
+test "$ac_cv_search_ldexp" = "no" && for i in m; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3333 "configure"
+#line 3603 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char exc_resume();
+char ldexp();
int main() {
-exc_resume()
+ldexp()
; return 0; }
EOF
-if { (eval echo configure:3344: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3614: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ac_cv_search_exc_resume="-l$i"
+ ac_cv_search_ldexp="-l$i"
break
else
echo "configure: failed program was:" >&5
LIBS="$ac_func_search_save_LIBS"
fi
-echo "$ac_t""$ac_cv_search_exc_resume" 1>&6
-if test "$ac_cv_search_exc_resume" != "no"; then
- test "$ac_cv_search_exc_resume" = "none required" || LIBS="$ac_cv_search_exc_resume $LIBS"
+echo "$ac_t""$ac_cv_search_ldexp" 1>&6
+if test "$ac_cv_search_ldexp" != "no"; then
+ test "$ac_cv_search_ldexp" = "none required" || LIBS="$ac_cv_search_ldexp $LIBS"
else :
fi
-GNAT_LIBEXC="$LIBS"
+LDEXP_LIB="$LIBS"
LIBS="$save_LIBS"
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:3373: checking for preprocessor stringizing operator" >&5
+echo "configure:3643: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3378 "configure"
+#line 3648 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:3411: checking for inttypes.h" >&5
+echo "configure:3681: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3416 "configure"
+#line 3686 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:3424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3694: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
for ac_func in times clock dup2 kill getrlimit setrlimit atoll atoq \
sysconf strsignal putc_unlocked fputc_unlocked fputs_unlocked \
fwrite_unlocked fprintf_unlocked getrusage nl_langinfo lstat \
- scandir alphasort
+ scandir alphasort gettimeofday mbstowcs wcswidth
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3451: checking for $ac_func" >&5
+echo "configure:3721: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3456 "configure"
+#line 3726 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:3505: checking for ssize_t" >&5
+echo "configure:3775: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3510 "configure"
+#line 3780 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:3541: checking for uid_t in sys/types.h" >&5
+echo "configure:3811: checking for uid_t in sys/types.h" >&5
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3546 "configure"
+#line 3816 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:3575: checking type of array argument to getgroups" >&5
+echo "configure:3845: checking type of array argument to getgroups" >&5
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
-#line 3583 "configure"
+#line 3853 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
}
EOF
-if { (eval echo configure:3608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_type_getgroups=gid_t
else
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
-#line 3622 "configure"
+#line 3892 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:3663: checking whether the printf functions support %p" >&5
+echo "configure:3933: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 3671 "configure"
+#line 3941 "configure"
#include "confdefs.h"
#include <stdio.h>
return (p != q);
}
EOF
-if { (eval echo configure:3684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:3722: checking for pid_t" >&5
+echo "configure:3992: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3727 "configure"
+#line 3997 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:3756: checking for vfork.h" >&5
+echo "configure:4026: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3761 "configure"
+#line 4031 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3766: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4036: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:3791: checking for working vfork" >&5
+echo "configure:4061: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:3797: checking for vfork" >&5
+echo "configure:4067: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3802 "configure"
+#line 4072 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:3825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 3847 "configure"
+#line 4117 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:3942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3967: checking for $ac_func" >&5
+echo "configure:4237: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3972 "configure"
+#line 4242 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
EOF
echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:4266: checking for working mmap from /dev/zero" >&5
+echo "configure:4536: checking for working mmap from /dev/zero" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
- # If this is not cygwin, and /dev/zero is a character device, it's probably
- # safe to assume it works.
+ # When cross-building, assume that this works, unless we know it
+ # doesn't. Of course, we have no way of knowing if there even is a /dev/zero
+ # on the host, let alone whether mmap will work on it.
case "$host_os" in
cygwin* | win32 | pe | mingw* ) ac_cv_func_mmap_dev_zero=buggy ;;
- * ) if test -c /dev/zero
- then ac_cv_func_mmap_dev_zero=yes
- else ac_cv_func_mmap_dev_zero=no
- fi ;;
+ darwin* ) ac_cv_func_mmap_dev_zero=no ;;
+ * ) ac_cv_func_mmap_dev_zero=yes ;;
esac
else
cat > conftest.$ac_ext <<EOF
-#line 4282 "configure"
+#line 4551 "configure"
#include "confdefs.h"
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:4286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_dev_zero=yes
else
fi
echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
-echo "configure:4313: checking for working mmap with MAP_ANON(YMOUS)" >&5
+echo "configure:4582: checking for working mmap with MAP_ANON(YMOUS)" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
# Unlike /dev/zero, it is not safe to assume MAP_ANON(YMOUS) works
# just because it's there. Some SCO Un*xen define it but don't implement it.
- ac_cv_func_mmap_anon=no
+ case "$host_os" in
+ darwin* ) ac_cv_func_mmap_anon=yes ;;
+ * ) ac_cv_func_mmap_anon=no ;;
+ esac
else
cat > conftest.$ac_ext <<EOF
-#line 4323 "configure"
+#line 4595 "configure"
#include "confdefs.h"
#define USE_MAP_ANON
#include "ct-mmap.inc"
EOF
-if { (eval echo configure:4328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4600: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_anon=yes
else
rm -f ct-mmap.inc
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:4356: checking for working mmap of a file" >&5
+echo "configure:4628: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done > conftestdata$$
if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_file=no
+ case "$host_os" in
+ darwin* ) ac_cv_func_mmap_file=yes ;;
+ * ) ac_cv_func_mmap_file=no ;;
+ esac
else
cat > conftest.$ac_ext <<EOF
-#line 4371 "configure"
+#line 4646 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
exit(0);
}
EOF
-if { (eval echo configure:4408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:4447: checking for iconv" >&5
+echo "configure:4722: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 4455 "configure"
+#line 4730 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:4465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 4477 "configure"
+#line 4752 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:4487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:4508: checking for iconv declaration" >&5
+echo "configure:4783: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4514 "configure"
+#line 4789 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:4533: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4808: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include"
for ac_func in getenv atol sbrk abort atof getcwd getwd \
strsignal putc_unlocked fputs_unlocked fwrite_unlocked \
- fprintf_unlocked strstr errno \
+ fprintf_unlocked strstr errno vasprintf \
malloc realloc calloc free basename getopt clock
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4571: checking whether $ac_func is declared" >&5
+echo "configure:4846: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4576 "configure"
+#line 4851 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4590: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4865: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
cat >> confdefs.h <<\EOF
#define HAVE_DECL_ERRNO 1
EOF
+ cat >> confdefs.h <<\EOF
+#define HAVE_DECL_VASPRINTF 1
+EOF
\
cat >> confdefs.h <<\EOF
#define HAVE_DECL_MALLOC 1
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4689: checking whether $ac_func is declared" >&5
+echo "configure:4967: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4694 "configure"
+#line 4972 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4990: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
fi
+cat > conftest.$ac_ext <<EOF
+#line 5029 "configure"
+#include "confdefs.h"
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif
+
+int main() {
+rlim_t l = 0;
+; return 0; }
+EOF
+if { (eval echo configure:5042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define rlim_t long
+EOF
+
+fi
+rm -f conftest*
+
+for ac_func in ldgetname
+do
+ ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
+echo "configure:5059: checking whether $ac_func is declared" >&5
+if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5064 "configure"
+#include "confdefs.h"
+#undef $ac_tr_decl
+#define $ac_tr_decl 1
+
+#include "ansidecl.h"
+#include "system.h"
+#ifdef HAVE_LDFCN_H
+#include <ldfcn.h>
+#endif
+
+
+int main() {
+#ifndef $ac_func
+char *(*pfn) = (char *(*)) $ac_func ;
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:5082: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ eval "gcc_cv_have_decl_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "gcc_cv_have_decl_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6 ; cat >> confdefs.h <<EOF
+#define $ac_tr_decl 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6 ; cat >> confdefs.h <<EOF
+#define $ac_tr_decl 0
+EOF
+
+fi
+
+done
+if test x = y ; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_DECL_LDGETNAME 1
+EOF
+fi
+
+
for ac_func in times
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4754: checking whether $ac_func is declared" >&5
+echo "configure:5118: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4759 "configure"
+#line 5123 "configure"
#include "confdefs.h"
#undef $ac_tr_decl
#define $ac_tr_decl 1
#endif
; return 0; }
EOF
-if { (eval echo configure:4777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5141: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
# More time-related stuff.
echo $ac_n "checking for struct tms""... $ac_c" 1>&6
-echo "configure:4811: checking for struct tms" >&5
+echo "configure:5175: checking for struct tms" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tms'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4817 "configure"
+#line 5181 "configure"
#include "confdefs.h"
#include "ansidecl.h"
struct tms tms;
; return 0; }
EOF
-if { (eval echo configure:4830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5194: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tms=yes
else
# use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
# revisit after autoconf 2.50.
echo $ac_n "checking for clock_t""... $ac_c" 1>&6
-echo "configure:4853: checking for clock_t" >&5
+echo "configure:5217: checking for clock_t" >&5
if eval "test \"`echo '$''{'gcc_cv_type_clock_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4859 "configure"
+#line 5223 "configure"
#include "confdefs.h"
#include "ansidecl.h"
clock_t x;
; return 0; }
EOF
-if { (eval echo configure:4869: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_type_clock_t=yes
else
fi
+echo $ac_n "checking for uchar""... $ac_c" 1>&6
+echo "configure:5254: checking for uchar" >&5
+if eval "test \"`echo '$''{'gcc_cv_type_uchar'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5259 "configure"
+#include "confdefs.h"
+
+#include "ansidecl.h"
+#include "system.h"
+
+int main() {
+if ((uchar *)0) return 0;
+ if (sizeof(uchar)) return 0;
+; return 0; }
+EOF
+if { (eval echo configure:5270: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_type_uchar=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_type_uchar=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gcc_cv_type_uchar" 1>&6
+if test $ac_cv_type_uchar = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_UCHAR 1
+EOF
+
+fi
+
# Restore CFLAGS from before the gcc_AC_NEED_DECLARATIONS tests.
CFLAGS="$saved_CFLAGS"
+# Check whether --enable-initfini-array or --disable-initfini-array was given.
+if test "${enable_initfini_array+set}" = set; then
+ enableval="$enable_initfini_array"
+ :
+else
+
+echo $ac_n "checking for .preinit_array/.init_array/.fini_array support""... $ac_c" 1>&6
+echo "configure:5300: checking for .preinit_array/.init_array/.fini_array support" >&5
+if eval "test \"`echo '$''{'gcc_cv_initfini_array'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ gcc_cv_initfini_array=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5308 "configure"
+#include "confdefs.h"
+
+static int x = -1;
+int main (void) { return x; }
+int foo (void) { x = 0; }
+int (*fp) (void) __attribute__ ((section (".init_array"))) = foo;
+EOF
+if { (eval echo configure:5316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ gcc_cv_initfini_array=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ gcc_cv_initfini_array=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$gcc_cv_initfini_array" 1>&6
+ enable_initfini_array=$gcc_cv_initfini_array
+
+fi
+
+if test $enable_initfini_array = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_INITFINI_ARRAY 1
+EOF
+
+fi
+
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:4894: checking if mkdir takes one argument" >&5
+echo "configure:5344: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4899 "configure"
+#line 5349 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:4916: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5366: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
-config_gtfiles=
+# With Setjmp/Longjmp based exception handling.
+# Check whether --enable-sjlj-exceptions or --disable-sjlj-exceptions was given.
+if test "${enable_sjlj_exceptions+set}" = set; then
+ enableval="$enable_sjlj_exceptions"
+ sjlj=`if test $enableval = yes; then echo 1; else echo 0; fi`
+cat >> confdefs.h <<EOF
+#define CONFIG_SJLJ_EXCEPTIONS $sjlj
+EOF
+
+fi
+
+
+echo $ac_n "checking for main in -lunwind""... $ac_c" 1>&6
+echo "configure:5406: checking for main in -lunwind" >&5
+ac_lib_var=`echo unwind'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lunwind $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5414 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:5421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ use_libunwind_default=yes
+else
+ echo "$ac_t""no" 1>&6
+use_libunwind_default=no
+fi
+
+# Use libunwind based exception handling.
+# Check whether --enable-libunwind-exceptions or --disable-libunwind-exceptions was given.
+if test "${enable_libunwind_exceptions+set}" = set; then
+ enableval="$enable_libunwind_exceptions"
+ use_libunwind_exceptions=$enableval
+else
+ use_libunwind_exceptions=$use_libunwind_default
+fi
+
+if test x"$use_libunwind_exceptions" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define USE_LIBUNWIND_EXCEPTIONS 1
+EOF
+
+fi
+
+# --------------------------------------------------------
+# Build, host, and target specific configuration fragments
+# --------------------------------------------------------
+
+target_gtfiles=
build_xm_file=
build_xm_defines=
build_install_headers_dir=install-headers-tar
then tm_file="$tm_file tm-dwarf2.h"
fi
-if test x$float_format = x
-then float_format=i64
-fi
-
-if test $float_format = none
-then float_h_file=Makefile.in
-else float_h_file=float-$float_format.h
-fi
-
# Say what files are being used for the output code and MD file.
echo "Using \`$srcdir/config/$out_file' for machine-specific logic."
echo "Using \`$srcdir/config/$md_file' as machine description file."
done
fi
+if test x$need_64bit_hwint = xyes; then
+ cat >> confdefs.h <<\EOF
+#define NEED_64BIT_HOST_WIDE_INT 1
+EOF
+
+fi
+
count=a
for f in $host_xm_file; do
count=${count}x
echo " $srcdir/config/$f"
done
fi
+echo "Using ${out_host_hook_obj} for host machine hooks."
if test "$host_xm_file" != "$build_xm_file"; then
count=a
fi
# Look for a file containing extra machine modes.
-if test -f $srcdir/config/${cpu_type}/${cpu_type}-modes.def; then
- extra_modes_file='$(srcdir)/config/'${cpu_type}/${cpu_type}-modes.def
+if test -n "$extra_modes" && test -f $srcdir/config/$extra_modes; then
+ extra_modes_file='$(srcdir)'/config/${extra_modes}
cat >> confdefs.h <<EOF
-#define EXTRA_MODES_FILE "${cpu_type}/${cpu_type}-modes.def"
+#define EXTRA_MODES_FILE "$extra_modes"
EOF
cat >> confdefs.h <<\EOF
# auto-host.h is the file containing items generated by autoconf and is
# the first file included by config.h.
-# If host=build, it is correct to have hconfig include auto-host.h
+# If host=build, it is correct to have bconfig include auto-host.h
# as well. If host!=build, we are in error and need to do more
# work to find out the build config parameters.
if test x$host = x$build
cd ..
rm -rf $tempdir
build_auto=auto-build.h
- FORBUILD=../$build
+ FORBUILD=../build-$build_alias
fi
tm_file="${tm_file} defaults.h"
-host_xm_file="auto-host.h ansidecl.h ${host_xm_file} ${tm_file}"
-build_xm_file="${build_auto} ansidecl.h ${build_xm_file} ${tm_file}"
-xm_file="ansidecl.h ${xm_file} ${tm_file}"
+tm_p_file="${tm_p_file} tm-preds.h"
+host_xm_file="auto-host.h ansidecl.h ${host_xm_file}"
+build_xm_file="${build_auto} ansidecl.h ${build_xm_file}"
+# We don't want ansidecl.h in target files, write code there in ISO/GNU C.
+# put this back in temporarily.
+xm_file="ansidecl.h ${xm_file}"
+
+# --------
+# UNSORTED
+# --------
# Truncate the target if necessary
if test x$host_truncate_target != x; then
echo $ac_n "checking for library containing strerror""... $ac_c" 1>&6
-echo "configure:5193: checking for library containing strerror" >&5
+echo "configure:5718: checking for library containing strerror" >&5
if eval "test \"`echo '$''{'ac_cv_search_strerror'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_strerror="no"
cat > conftest.$ac_ext <<EOF
-#line 5200 "configure"
+#line 5725 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_strerror="none required"
else
test "$ac_cv_search_strerror" = "no" && for i in cposix; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5222 "configure"
+#line 5747 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_strerror="-l$i"
break
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5256: checking for working const" >&5
+echo "configure:5781: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5261 "configure"
+#line 5786 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:5310: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5331: checking for off_t" >&5
+echo "configure:5856: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5336 "configure"
+#line 5861 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5364: checking for size_t" >&5
+echo "configure:5889: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5369 "configure"
+#line 5894 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5399: checking for working alloca.h" >&5
+echo "configure:5924: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5404 "configure"
+#line 5929 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:5411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5432: checking for alloca" >&5
+echo "configure:5957: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5437 "configure"
+#line 5962 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:5465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5497: checking whether alloca needs Cray hooks" >&5
+echo "configure:6022: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5502 "configure"
+#line 6027 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5527: checking for $ac_func" >&5
+echo "configure:6052: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5532 "configure"
+#line 6057 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6080: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5582: checking stack direction for C alloca" >&5
+echo "configure:6107: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 5590 "configure"
+#line 6115 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:5609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
-echo "configure:5632: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo "configure:6157: checking whether we are using the GNU C Library 2.1 or newer" >&5
if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5637 "configure"
+#line 6162 "configure"
#include "confdefs.h"
#include <features.h>
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5673: checking for $ac_hdr" >&5
+echo "configure:6198: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5678 "configure"
+#line 6203 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5683: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6208: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup strtoul tsearch __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5714: checking for $ac_func" >&5
+echo "configure:6239: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5719 "configure"
+#line 6244 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5742: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:5783: checking for iconv" >&5
+echo "configure:6308: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 5791 "configure"
+#line 6316 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:5801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 5813 "configure"
+#line 6338 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:5823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:5844: checking for iconv declaration" >&5
+echo "configure:6369: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5850 "configure"
+#line 6375 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:5869: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6394: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:5898: checking for nl_langinfo and CODESET" >&5
+echo "configure:6423: checking for nl_langinfo and CODESET" >&5
if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5903 "configure"
+#line 6428 "configure"
#include "confdefs.h"
#include <langinfo.h>
int main() {
char* cs = nl_langinfo(CODESET);
; return 0; }
EOF
-if { (eval echo configure:5910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_langinfo_codeset=yes
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:5933: checking for LC_MESSAGES" >&5
+echo "configure:6458: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5938 "configure"
+#line 6463 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:5945: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:5966: checking whether NLS is requested" >&5
+echo "configure:6491: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:5989: checking whether included gettext is requested" >&5
+echo "configure:6514: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6009: checking for libintl.h" >&5
+echo "configure:6534: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6014 "configure"
+#line 6539 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6019: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6544: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
EOF
echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
-echo "configure:6040: checking for GNU gettext in libc" >&5
+echo "configure:6565: checking for GNU gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6045 "configure"
+#line 6570 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:6054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gnugettext1_libc=yes
else
if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
-echo "configure:6070: checking for GNU gettext in libintl" >&5
+echo "configure:6595: checking for GNU gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gt_save_LIBS="$LIBS"
LIBS="$LIBS -lintl $LIBICONV"
cat > conftest.$ac_ext <<EOF
-#line 6077 "configure"
+#line 6602 "configure"
#include "confdefs.h"
#include <libintl.h>
extern int _nl_msg_cat_cntr;
return (int) gettext ("") + _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:6086: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gnugettext1_libintl=yes
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6119: checking for $ac_func" >&5
+echo "configure:6644: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6124 "configure"
+#line 6649 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6176: checking for $ac_word" >&5
+echo "configure:6701: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6210: checking for $ac_word" >&5
+echo "configure:6735: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6247: checking for $ac_word" >&5
+echo "configure:6772: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6297: checking for $ac_word" >&5
+echo "configure:6822: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6331: checking for $ac_word" >&5
+echo "configure:6856: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6367: checking for $ac_word" >&5
+echo "configure:6892: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6439: checking for $ac_word" >&5
+echo "configure:6964: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_verc_fail=yes
else
echo $ac_n "checking version of bison""... $ac_c" 1>&6
-echo "configure:6472: checking version of bison" >&5
+echo "configure:6997: checking version of bison" >&5
ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
case $ac_prog_version in
'') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
if test "x$CATOBJEXT" != x; then
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:6517: checking for catalogs to be installed" >&5
+echo "configure:7042: checking for catalogs to be installed" >&5
# Look for .po and .gmo files in the source directory.
CATALOGS=
XLINGUAS=
case $host_os in
win32 | pe | cygwin* | mingw32* | uwin*)
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:6575: checking whether windows registry support is requested" >&5
+echo "configure:7100: checking whether windows registry support is requested" >&5
if test "x$enable_win32_registry" != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:6584: checking for library containing RegOpenKeyExA" >&5
+echo "configure:7109: checking for library containing RegOpenKeyExA" >&5
if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_RegOpenKeyExA="no"
cat > conftest.$ac_ext <<EOF
-#line 6591 "configure"
+#line 7116 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:6602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="none required"
else
test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6613 "configure"
+#line 7138 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:6624: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="-l$i"
break
if test "x$enable_win32_registry" != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:6666: checking registry key on windows hosts" >&5
+echo "configure:7191: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
fi
done
+symbolic_link='ln -s'
+
# If the host doesn't support symlinks, modify CC in
# FLAGS_TO_PASS so CC="stage1/xgcc -Bstage1/" works.
# Otherwise, we can use "CC=$(CC)".
tm_p_file_list=
for f in $tm_p_file; do
- tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f"
+ case $f in
+ tm-preds.h )
+ tm_p_file_list="${tm_p_file_list} $f" ;;
+ *) tm_p_file_list="${tm_p_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
host_xm_file_list=
| powerpc*-*-*,powerpc64*-*-*)
CROSS="$CROSS -DNATIVE_CROSS" ;;
esac
+elif test "x$TARGET_SYSTEM_ROOT" != x; then
+ # This is just $(TARGET_SYSTEM_ROOT)$(NATIVE_SYSTEM_HEADER_DIR)
+ SYSTEM_HEADER_DIR='$(CROSS_SYSTEM_HEADER_DIR)'
fi
# If this is a cross-compiler that does not
# This prevents libgcc2 from containing any code which requires libc
# support.
inhibit_libc=
-if test x$host != x$target && test x$with_headers = x; then
+if { test x$host != x$target && test "x$with_headers" = x &&
+ test "x$with_sysroot" = x ; } || test x$with_newlib = xyes ; then
inhibit_libc=-Dinhibit_libc
-else
- if test x$with_newlib = xyes; then
- inhibit_libc=-Dinhibit_libc
- fi
fi
# When building gcc with a cross-compiler, we need to adjust things so
# that the generator programs are still built with the native compiler.
# Also, we cannot run fixincludes or fix-header.
-# Note that the terminology here is wrong; it should be BUILD_* throughout.
-# FIXME.
# These are the normal (build=host) settings:
BUILD_PREFIX=
BUILD_PREFIX_1=ignore-
-HOST_CC='$(CC)'
-HOST_CFLAGS='$(ALL_CFLAGS)'
+BUILD_CC='$(CC)'
+BUILD_CFLAGS='$(ALL_CFLAGS)'
STMP_FIXINC=stmp-fixinc
STMP_FIXPROTO=stmp-fixproto
then
BUILD_PREFIX=build-
BUILD_PREFIX_1=build-
- HOST_CC='$(CC_FOR_BUILD)'
- HOST_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS_FOR_BUILD) $(XCFLAGS)'
+ BUILD_CC='$(CC_FOR_BUILD)'
+ BUILD_CFLAGS='$(INTERNAL_CFLAGS) $(T_CFLAGS) $(CFLAGS_FOR_BUILD) $(XCFLAGS)'
- STMP_FIXINC=
- STMP_FIXPROTO=
+ if test "x$TARGET_SYSTEM_ROOT" = x; then
+ STMP_FIXINC=
+ STMP_FIXPROTO=
+ fi
fi
# Expand extra_headers to include complete path.
done
fi
-if test x$use_collect2 = xno; then
- use_collect2=
-fi
-
# Add a definition of USE_COLLECT2 if system wants one.
-if test x$use_collect2 != x
-then
- host_xm_defines="${host_xm_defines} USE_COLLECT2"
- xm_defines="${xm_defines} USE_COLLECT2"
-fi
-
-# If we have gas in the build tree, make a link to it.
-if test -f ../gas/Makefile; then
- rm -f as; $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
-fi
-
-# If we have nm and objdump in the build tree, make a link to them.
-if test -f ../binutils/Makefile; then
- rm -f nm; $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
- rm -f objdump; $symbolic_link ../binutils/objdump$host_exeext objdump$host_exeext 2>/dev/null
-fi
-
-# If we have ld in the build tree, make a link to it.
-if test -f ../ld/Makefile; then
- rm -f collect-ld; $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext 2>/dev/null
-fi
+case $use_collect2 in
+ no) use_collect2= ;;
+ "") ;;
+ *)
+ host_xm_defines="${host_xm_defines} USE_COLLECT2"
+ xm_defines="${xm_defines} USE_COLLECT2"
+ ;;
+esac
-# Figure out what assembler we will be using.
+# Identify the assembler which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the assembler
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target assembler and hope that it will have the same features
+# as the host->target assembler we'll be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:6880: checking what assembler to use" >&5
+echo "configure:7400: checking what assembler to use" >&5
+in_tree_gas=no
gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
-gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
elif test -x "$AS"; then
elif test -x as$host_exeext; then
# Build using assembler in the current directory.
gcc_cv_as=./as$host_exeext
-elif test -f $gcc_cv_as_gas_srcdir/configure.in -a -f ../gas/Makefile; then
- # Single tree build which includes gas.
- for f in $gcc_cv_as_bfd_srcdir/configure $gcc_cv_as_gas_srcdir/configure $gcc_cv_as_gas_srcdir/configure.in $gcc_cv_as_gas_srcdir/Makefile.in
- do
- gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
- if test x$gcc_cv_gas_version != x; then
- break
- fi
- done
- gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
- gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
+elif test -f $gcc_cv_as_gas_srcdir/configure.in \
+ && test -f ../gas/Makefile; then
+ # Single tree build which includes gas.
+ in_tree_gas=yes
+ gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
+for f in $gcc_cv_as_bfd_srcdir/configure \
+ $gcc_cv_as_gas_srcdir/configure \
+ $gcc_cv_as_gas_srcdir/configure.in \
+ $gcc_cv_as_gas_srcdir/Makefile.in ; do
+ gcc_cv_gas_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
+ if test x$gcc_cv_gas_version != x; then
+ break
+ fi
+done
+gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
+gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
+
+ rm -f as$host_exeext
+ $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
fi
if test "x$gcc_cv_as" = x; then
fi
done
fi
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- echo "$ac_t"""newly built gas"" 1>&6
-else
- echo "$ac_t""$gcc_cv_as" 1>&6
-fi
+case $in_tree_gas in
+ yes)
+ echo "$ac_t"""newly built gas"" 1>&6
+ ;;
+ no)
+ echo "$ac_t""$gcc_cv_as" 1>&6
+ ;;
+esac
-# Figure out what linker we will be using.
+# Identify the linker which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the linker
+# which will be driven by the driver program.
+#
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target linker and hope that it will have the same features
+# as the host->target linker we'll be using.
echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:6974: checking what linker to use" >&5
+echo "configure:7511: checking what linker to use" >&5
+in_tree_ld=no
gcc_cv_ld=
gcc_cv_gld_major_version=
gcc_cv_gld_minor_version=
gcc_cv_ld="$DEFAULT_LINKER"
elif test -x "$LD"; then
gcc_cv_ld="$LD"
-elif test -x ld$host_exeext; then
+elif test -x collect-ld$host_exeext; then
# Build using linker in the current directory.
- gcc_cv_ld=./ld$host_exeext
-elif test -f $gcc_cv_ld_gld_srcdir/configure.in -a -f ../ld/Makefile; then
+ gcc_cv_ld=./collect-ld$host_exeext
+elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
+ && test -f ../ld/Makefile; then
# Single tree build which includes ld.
+ in_tree_ld=yes
for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
do
gcc_cv_gld_version=`grep '^VERSION=[0-9]*\.[0-9]*' $f`
done
gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+ rm -f collect-ld$host_exeext
+ $symbolic_link ../ld/ld-new$host_exeext collect-ld$host_exeext \
+ 2>/dev/null
fi
if test "x$gcc_cv_ld" = x; then
fi
done
fi
-if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
- echo "$ac_t"""newly built ld"" 1>&6
-else
- echo "$ac_t""$gcc_cv_ld" 1>&6
-fi
+case $in_tree_ld in
+ yes)
+ echo "$ac_t"""newly built ld"" 1>&6
+ ;;
+ no)
+ echo "$ac_t""$gcc_cv_ld" 1>&6
+ ;;
+esac
# Figure out what nm we will be using.
+gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:7067: checking what nm to use" >&5
+echo "configure:7614: checking what nm to use" >&5
+in_tree_nm=no
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
+elif test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile; then
+ # Single tree build which includes binutils.
+ in_tree_nm=yes
+ gcc_cv_nm=./nm$host_exeext
+ rm -f nm$host_exeext
+ $symbolic_link ../binutils/nm-new$host_exeext nm$host_exeext 2>/dev/null
elif test "x$program_prefix" != xNONE; then
gcc_cv_nm=${program_prefix}nm$host_exeext
else
gcc_cv_nm=`echo nm | sed ${program_transform_name}`$host_exeext
fi
-echo "$ac_t""$gcc_cv_nm" 1>&6
+case $in_tree_nm in
+ yes) echo "$ac_t"""newly built nm"" 1>&6 ;;
+ no) echo "$ac_t""$gcc_cv_nm" 1>&6 ;;
+esac
# Figure out what objdump we will be using.
echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:7079: checking what objdump to use" >&5
+echo "configure:7637: checking what objdump to use" >&5
+in_tree_objdump=no
if test -x objdump$host_exeext; then
gcc_cv_objdump=./objdump$host_exeext
+elif test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile; then
+ # Single tree build which includes binutils.
+ in_tree_objdump=yes
+ gcc_cv_objdump=./objdump$host_exeext
+ rm -f objdump$host_exeext
+ $symbolic_link ../binutils/objdump$host_exeext \
+ objdump$host_exeext 2>/dev/null
elif test "x$program_prefix" != xNONE; then
gcc_cv_objdump=${program_prefix}objdump$host_exeext
else
- gcc_cv_objdump=`echo objdump | sed ${program_transform_name}`$host_exeext
+ gcc_cv_objdump=`echo objdump | \
+ sed ${program_transform_name}`$host_exeext
fi
-echo "$ac_t""$gcc_cv_objdump" 1>&6
+case $in_tree_objdump in
+ yes) echo "$ac_t"""newly built objdump"" 1>&6 ;;
+ no) echo "$ac_t""$gcc_cv_objdump" 1>&6 ;;
+esac
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7091: checking assembler alignment features" >&5
+echo "configure:7662: checking assembler alignment features" >&5
gcc_cv_as_alignment_features=none
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- # Gas version 2.6 and later support for .balign and .p2align.
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".balign and .p2align"
- cat >> confdefs.h <<\EOF
+if test $in_tree_gas = yes; then
+ # Gas version 2.6 and later support for .balign and .p2align.
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 6 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ gcc_cv_as_alignment_features=".balign and .p2align"
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
EOF
- fi
- # Gas version 2.8 and later support specifying the maximum
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- cat >> confdefs.h <<\EOF
+
+
+fi
+
+ # Gas version 2.8 and later support specifying the maximum
+ # bytes to skip when using .p2align.
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 8 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ gcc_cv_as_alignment_features=".p2align including maximum skip"
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
EOF
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo ".balign 4" > conftest.s
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:7139: checking assembler subsection support" >&5
+echo "configure:7723: checking assembler subsection support" >&5
gcc_cv_as_subsections=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_subsections="working .subsection -1"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 9 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_subsections="working .subsection -1"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .subsection
echo ".subsection 1" > conftest.s
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:7179: checking assembler weak support" >&5
+echo "configure:7772: checking assembler weak support" >&5
gcc_cv_as_weak=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 2 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_weak="yes"
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .weak
echo " .weak foobar" > conftest.s
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:7202: checking assembler hidden support" >&5
+echo "configure:7802: checking assembler hidden support" >&5
gcc_cv_as_hidden=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -eq 12 \
- -a "$gcc_cv_gas_patch_version" -ge 1 \
- -o "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -gt 12 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_hidden="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& (test $gcc_cv_gas_minor_version -gt 12 \
+ || (test $gcc_cv_gas_minor_version -eq 12 \
+ && test $gcc_cv_gas_patch_version -ge 1 )) \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_hidden="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .hidden
echo " .hidden foobar" > conftest.s
fi
echo "$ac_t""$gcc_cv_as_hidden" 1>&6
libgcc_visibility=$gcc_cv_as_hidden
+case "$target" in
+ mips-sgi-irix6*)
+ if test x"$gnu_ld_flag" = x"no"; then
+ # Even if using gas with .hidden support, the resulting object files
+ # cannot be linked with the IRIX 6 O32 linker. With the N32 and
+ # N64 linkers, the problem is that the linker refuses to accept
+ # -call_shared (passed by default to the linker) and -r (used to
+ # link the object file generated without .hidden directives with
+ # one that hides symbols), so we also lose.
+ libgcc_visibility=no
+ fi
+ ;;
+esac
echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:7265: checking assembler leb128 support" >&5
+echo "configure:7883: checking assembler leb128 support" >&5
gcc_cv_as_leb128=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 11 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_leb128="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_leb128="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we have .[us]leb128, and support symbol arithmetic with it.
cat > conftest.s <<EOF
echo "$ac_t""$gcc_cv_as_leb128" 1>&6
echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:7310: checking assembler eh_frame optimization" >&5
+echo "configure:7937: checking assembler eh_frame optimization" >&5
gcc_cv_as_eh_frame=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_eh_frame="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 12 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_eh_frame="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if this is GAS.
as_ver=`$gcc_cv_as --version < /dev/null 2> /dev/null | head -1`
echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:7391: checking assembler section merging support" >&5
+echo "configure:8027: checking assembler section merging support" >&5
gcc_cv_as_shf_merge=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
- gcc_cv_as_shf_merge=yes
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 12 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_shf_merge=yes
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
# Check if we support SHF_MERGE sections
echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:7414: checking assembler thread-local storage support" >&5
+echo "configure:8059: checking assembler thread-local storage support" >&5
gcc_cv_as_tls=no
conftest_s=
tls_first_major=
leal foo@DTPOFF(%eax), %edx
movl foo@GOTTPOFF(%ebx), %eax
subl foo@GOTTPOFF(%ebx), %eax
+ addl foo@GOTNTPOFF(%ebx), %eax
+ movl foo@INDNTPOFF, %eax
movl $foo@TPOFF, %eax
subl $foo@TPOFF, %eax
leal foo@NTPOFF(%ecx), %eax'
tls_first_major=2
- tls_first_minor=13
+ tls_first_minor=14
+ ;;
+ x86_64-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ movq %fs:0, %rax
+ leaq foo@TLSGD(%rip), %rdi
+ leaq foo@TLSLD(%rip), %rdi
+ leaq foo@DTPOFF(%rax), %rdx
+ movq foo@GOTTPOFF(%rip), %rax
+ movq $foo@TPOFF, %rax'
+ tls_first_major=2
+ tls_first_minor=14
;;
ia64-*-*)
conftest_s='
tls_first_major=2
tls_first_minor=13
;;
+ s390-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .long foo@TLSGD
+ .long foo@TLSLDM
+ .long foo@DTPOFF
+ .long foo@NTPOFF
+ .long foo@GOTNTPOFF
+ .long foo@INDNTPOFF
+ l %r1,foo@GOTNTPOFF(%r12)
+ l %r1,0(%r1):tls_load:foo
+ bas %r14,0(%r1,%r13):tls_gdcall:foo
+ bas %r14,0(%r1,%r13):tls_ldcall:foo'
+ tls_first_major=2
+ tls_first_minor=14
+ ;;
+ s390x-*-*)
+ conftest_s='
+ .section ".tdata","awT",@progbits
+foo: .long 25
+ .text
+ .quad foo@TLSGD
+ .quad foo@TLSLDM
+ .quad foo@DTPOFF
+ .quad foo@NTPOFF
+ .quad foo@GOTNTPOFF
+ lg %r1,foo@GOTNTPOFF(%r12)
+ larl %r1,foo@INDNTPOFF
+ brasl %r14,__tls_get_offset@PLT:tls_gdcall:foo
+ brasl %r14,__tls_get_offset@PLT:tls_ldcall:foo'
+ tls_first_major=2
+ tls_first_minor=14
+ ;;
esac
if test -z "$tls_first_major"; then
:
-elif test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
-then
- if test "$gcc_cv_gas_major_version" -eq "$tls_first_major" \
- -a "$gcc_cv_gas_minor_version" -ge "$tls_first_minor" \
- -o "$gcc_cv_gas_major_version" -gt "$tls_first_major"; then
+elif test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq $tls_first_major \
+&& test $gcc_cv_gas_minor_version -ge $tls_first_minor \
+|| test $gcc_cv_gas_major_version -gt $tls_first_major ; then
+
+
gcc_cv_as_tls=yes
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
if $gcc_cv_as --fatal-warnings -o conftest.o conftest.s > /dev/null 2>&1
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:7506: checking assembler supports explicit relocations" >&5
+echo "configure:8206: checking assembler supports explicit relocations" >&5
if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_explicit_relocs=unknown
- if test x$gcc_cv_gas_major_version != x \
- -a x$gcc_cv_gas_minor_version != x
- then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 12 \
- -o "$gcc_cv_gas_major_version" -gt 2; then
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 12 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_explicit_relocs=yes
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
cat > conftest.s << 'EOF'
.set nomacro
;;
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:7556: checking assembler .register pseudo-op support" >&5
+echo "configure:8259: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:7584: checking assembler supports -relax" >&5
+echo "configure:8287: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:7612: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:8315: checking assembler and linker support unaligned pc related relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:7639: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+echo "configure:8342: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
- if test "x$gcc_cv_as_flags64" != xno; then
- echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:7680: checking for assembler offsetable %lo() support" >&5
+ echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
+echo "configure:8382: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- gcc_cv_as_offsetable_lo10=unknown
- if test "x$gcc_cv_as" != x; then
- # Check if assembler has offsetable %lo()
- echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
- echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
- if $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s \
- > /dev/null 2>&1 &&
- $gcc_cv_as $gcc_cv_as_flags64 -o conftest1.o conftest1.s \
- > /dev/null 2>&1; then
- if cmp conftest.o conftest1.o > /dev/null 2>&1; then
- gcc_cv_as_offsetable_lo10=no
- else
- gcc_cv_as_offsetable_lo10=yes
- fi
- else
+ gcc_cv_as_offsetable_lo10=unknown
+ if test "x$gcc_cv_as" != x; then
+ # Check if assembler has offsetable %lo()
+ echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
+ echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
+ if $gcc_cv_as -xarch=v9 -o conftest.o conftest.s \
+ > /dev/null 2>&1 &&
+ $gcc_cv_as -xarch=v9 -o conftest1.o conftest1.s \
+ > /dev/null 2>&1; then
+ if cmp conftest.o conftest1.o > /dev/null 2>&1; then
gcc_cv_as_offsetable_lo10=no
+ else
+ gcc_cv_as_offsetable_lo10=yes
fi
- rm -f conftest.s conftest.o conftest1.s conftest1.o
+ else
+ gcc_cv_as_offsetable_lo10=no
fi
-
+ rm -f conftest.s conftest.o conftest1.s conftest1.o
+ fi
+
fi
echo "$ac_t""$gcc_cv_as_offsetable_lo10" 1>&6
- if test "x$gcc_cv_as_offsetable_lo10" = xyes; then
- cat >> confdefs.h <<\EOF
+ if test "x$gcc_cv_as_offsetable_lo10" = xyes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_OFFSETABLE_LO10 1
EOF
- fi
fi
;;
i[34567]86-*-* | x86_64-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:7720: checking assembler instructions" >&5
+echo "configure:8421: checking assembler instructions" >&5
gcc_cv_as_instructions=
- if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 9 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_instructions="filds fists"
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"
while test $# -gt 0
echo "$ac_t""$gcc_cv_as_instructions" 1>&6
echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:7747: checking assembler GOTOFF in data directives" >&5
+echo "configure:8455: checking assembler GOTOFF in data directives" >&5
gcc_cv_as_gotoff_in_data=no
- if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
- then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2; then
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
gcc_cv_as_gotoff_in_data=yes
- fi
+
+
+fi
+
elif test x$gcc_cv_as != x; then
cat > conftest.s <<EOF
.text
echo "$ac_t""$gcc_cv_as_gotoff_in_data" 1>&6
;;
+
+ ia64*-*-*)
+ echo $ac_n "checking assembler supports ltoffx and ldxmov""... $ac_c" 1>&6
+echo "configure:8489: checking assembler supports ltoffx and ldxmov" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ gcc_cv_as_ltoffx_ldxmov_relocs=unknown
+ if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 14 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ gcc_cv_as_ltoffx_ldxmov_relocs=yes
+
+
+fi
+
+ elif test x$gcc_cv_as != x; then
+ cat > conftest.s << 'EOF'
+ .text
+ addl r15 = @ltoffx(x#), gp
+ ;;
+ ld8.mov r16 = [r15], x#
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_ltoffx_ldxmov_relocs=yes
+ else
+ gcc_cv_as_ltoffx_ldxmov_relocs=no
+ fi
+ rm -f conftest.s conftest.o
+ fi
+
+fi
+
+echo "$ac_t""$gcc_cv_as_ltoffx_ldxmov_relocs" 1>&6
+ if test "x$gcc_cv_as_ltoffx_ldxmov_relocs" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_LTOFFX_LDXMOV_RELOCS 1
+EOF
+
+ fi
+ ;;
esac
echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:7777: checking assembler dwarf2 debug_line support" >&5
+echo "configure:8534: checking assembler dwarf2 debug_line support" >&5
gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
# ??? Once 2.11 is released, probably need to add first known working
# version to the per-target configury.
case "$target" in
- i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-* | m68*-*-* | x86_64*-*-* | hppa*-*-*)
+ i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-* | m68*-*-* \
+ | x86_64*-*-* | hppa*-*-* | arm*-*-* | strongarm*-*-* | xscale*-*-*)
insn="nop"
;;
ia64*-*-*)
insn="nop 0"
;;
esac
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
-then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- && test x"$insn" != x ; then
- gcc_cv_as_dwarf2_debug_line="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_dwarf2_debug_line="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x -a x"$insn" != x ; then
echo ' .file 1 "conftest.s"' > conftest.s
echo ' .loc 1 3 0' >> conftest.s
echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:7833: checking assembler --gdwarf2 support" >&5
+echo "configure:8596: checking assembler --gdwarf2 support" >&5
gcc_cv_as_gdwarf2_flag=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
-then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- && test x"$insn" != x ; then
- gcc_cv_as_gdwarf2_debug_flag="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_gdwarf2_flag="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x -a x"$insn" != x ; then
echo '' > conftest.s
# ??? This fails with non-gnu grep.
echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:7862: checking assembler --gstabs support" >&5
+echo "configure:8630: checking assembler --gstabs support" >&5
gcc_cv_as_gstabs_flag=no
-if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
-then
- if test "$gcc_cv_gas_major_version" -eq 2 \
- -a "$gcc_cv_gas_minor_version" -ge 11 \
- -o "$gcc_cv_gas_major_version" -gt 2 \
- && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
- && test x"$insn" != x ; then
- gcc_cv_as_gstabs_debug_flag="yes"
- fi
+if test $in_tree_gas = yes ; then
+ if test $gcc_cv_gas_major_version -eq 2 \
+&& test $gcc_cv_gas_minor_version -ge 11 \
+|| test $gcc_cv_gas_major_version -gt 2 ; then
+
+
+ if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_gstabs_flag="yes"
+ fi
+
+
+fi
+
elif test x$gcc_cv_as != x -a x"$insn" != x ; then
echo '' > conftest.s
# ??? This fails with non-gnu grep.
fi
echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
+echo $ac_n "checking linker read-only and read-write section mixing""... $ac_c" 1>&6
+echo "configure:8663: checking linker read-only and read-write section mixing" >&5
+gcc_cv_ld_ro_rw_mix=unknown
+if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
+ gcc_cv_ld_ro_rw_mix=read-write
+ fi
+elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x -a x$gcc_cv_objdump != x ; then
+ echo '.section "myfoosect", "a"' > conftest1.s
+ echo '.section "myfoosect", "aw"' > conftest2.s
+ echo '.byte 1' >> conftest2.s
+ echo '.section "myfoosect", "a"' > conftest3.s
+ echo '.byte 0' >> conftest3.s
+ if $gcc_cv_as -o conftest1.o conftest1.s > /dev/null 2>&1 \
+ && $gcc_cv_as -o conftest2.o conftest2.s > /dev/null 2>&1 \
+ && $gcc_cv_as -o conftest3.o conftest3.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -shared -o conftest1.so conftest1.o \
+ conftest2.o conftest3.o; then
+ gcc_cv_ld_ro_rw_mix=`$gcc_cv_objdump -h conftest1.so \
+ | grep -A1 myfoosect`
+ if echo "$gcc_cv_ld_ro_rw_mix" | grep CONTENTS > /dev/null; then
+ if echo "$gcc_cv_ld_ro_rw_mix" | grep READONLY > /dev/null; then
+ gcc_cv_ld_ro_rw_mix=read-only
+ else
+ gcc_cv_ld_ro_rw_mix=read-write
+ fi
+ fi
+ fi
+ rm -f conftest.* conftest[123].*
+fi
+if test x$gcc_cv_ld_ro_rw_mix = xread-write; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LD_RO_RW_SECTION_MIXING 1
+EOF
+
+fi
+echo "$ac_t""$gcc_cv_ld_ro_rw_mix" 1>&6
+
echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7890: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:8701: checking linker PT_GNU_EH_FRAME support" >&5
gcc_cv_ld_eh_frame_hdr=no
-if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
+if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
gcc_cv_ld_eh_frame_hdr=yes
fi
fi
echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
-if test "$prefix" != "/usr" && test "$prefix" != "/usr/local" ; then
+# Miscellaneous target-specific checks.
+case "$target" in
+ mips*-*-*)
+ echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
+echo "configure:8725: checking whether libgloss uses STARTUP directives consistently" >&5
+ gcc_cv_mips_libgloss_startup=no
+ gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
+ if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ else
+ test_prefix=$exec_prefix
+ fi
+ for f in $gcc_cv_libgloss_srcdir/mips/idt.ld $test_prefix/$target_alias/lib/idt.ld
+ do
+ if grep '^STARTUP' $f > /dev/null 2>&1; then
+ gcc_cv_mips_libgloss_startup=yes
+ break
+ fi
+ done
+ if test x"$gcc_cv_mips_libgloss_startup" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MIPS_LIBGLOSS_STARTUP_DIRECTIVES 1
+EOF
+
+ fi
+ echo "$ac_t""$gcc_cv_mips_libgloss_startup" 1>&6
+ ;;
+esac
+
+if test x$with_sysroot = x && test x$host = x$target \
+ && test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" ; then
cat >> confdefs.h <<EOF
#define PREFIX_INCLUDE_DIR "$prefix/include"
EOF
enable_languages=all
fi
else
- if test x"${enable_languages}" = x;
+ if test x"${enable_languages}" = x \
+ || test x"${enable_languages}" = xyes;
then
{ echo "configure: error: --enable-languages needs at least one language argument" 1>&2; exit 1; }
fi
esac
done
-remaining_languages=${enable_languages}
+expected_languages=`echo ,${enable_languages}, | sed -e 's:,: :g' -e 's: *: :g' -e 's: *: :g' -e 's:^ ::' -e 's: $::'`
+found_languages=
subdirs=
for lang in ${srcdir}/*/config-lang.in ..
do
*,all,*) add_this_lang=yes ;;
*) add_this_lang=no ;;
esac
+ found_languages="${found_languages} ${lang_alias}"
if test x"${add_this_lang}" = xyes; then
- remaining_languages=`echo $remaining_languages | sed -e s/${lang_alias}//g`
case $lang in
${srcdir}/ada/config-lang.in)
if test x$have_gnat = xyes ; then
esac
done
-remaining_languages_check=`echo $remaining_languages | sed -e 's/,//g' -e 's/^c$//'g`
-if test "xxx$remaining_languages_check" != "xxx" -a "xxx$remaining_languages_check" != "xxxall" ; then
- remaining_languages_clean=`echo $remaining_languages | sed -e 's/^c,//' -e 's/,c,/,/' -e 's/,c$//' -e 's/^c$//' -e 's/,,*/,/g' -e 's/^,//g' -e 's/,$//g' `
- echo "Language alias(es) not found: $remaining_languages_clean"
- echo "Refer to the configure instructions in the doc directory"
- exit 1
+missing_languages=
+for expected_language in ${expected_languages} ..
+do
+ if test "${expected_language}" != ..; then
+ missing_language="${expected_language}"
+ if test "${expected_language}" = "c" \
+ || test "${expected_language}" = "all"; then
+ missing_language=
+ fi
+ for found_language in ${found_languages} ..
+ do
+ if test "${found_language}" != ..; then
+ if test "${expected_language}" = "${found_language}"; then
+ missing_language=
+ fi
+ fi
+ done
+ if test "x${missing_language}" != x; then
+ missing_languages="${missing_languages} ${missing_language}"
+ fi
+ fi
+done
+
+if test "x$missing_languages" != x; then
+ { echo "configure: error:
+The following requested languages were not found:${missing_languages}
+The following languages were available: c${found_languages}" 1>&2; exit 1; }
fi
# Make gthr-default.h if we have a thread file.
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:8062: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:8930: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
MAINT='#'
fi
-# With Setjmp/Longjmp based exception handling.
-# Check whether --enable-sjlj-exceptions or --disable-sjlj-exceptions was given.
-if test "${enable_sjlj_exceptions+set}" = set; then
- enableval="$enable_sjlj_exceptions"
- sjlj=`if test $enableval = yes; then echo 1; else echo 0; fi`
-cat >> confdefs.h <<EOF
-#define CONFIG_SJLJ_EXCEPTIONS $sjlj
-EOF
-
-fi
-
-
# Make empty files to contain the specs and options for each language.
# Then add #include lines to for a compiler that has specs and/or options.
# List of language makefile fragments.
all_lang_makefiles=
# Files for gengtype
-all_gtfiles="$config_gtfiles"
+all_gtfiles="$target_gtfiles"
+# Files for gengtype with language
+all_gtfiles_files_langs=
+all_gtfiles_files_files=
# Add the language fragments.
# Languages are added via two mechanisms. Some information must be
all_stagestuff="$all_stagestuff $stagestuff"
all_outputs="$all_outputs $outputs"
all_gtfiles="$all_gtfiles $gtfiles"
+ for f in .. $gtfiles
+ do
+ if test $f != ".."
+ then
+ all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
+ all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
+ fi
+ done
fi
done
+# Pick up gtfiles for c
+gtfiles=
+s="c"
+. ${srcdir}/c-config-lang.in
+all_gtfiles="$all_gtfiles $gtfiles"
+for f in .. $gtfiles
+do
+ if test $f != ".."
+ then
+ all_gtfiles_files_langs="$all_gtfiles_files_langs ${s} "
+ all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
+ fi
+done
+
check_languages=
for language in .. $all_languages
do
rm -f Make-hooks
touch Make-hooks
-target_list="all.build all.cross start.encap rest.encap \
+target_list="all.build all.cross start.encap rest.encap tags \
info dvi generated-manpages \
install-normal install-common install-info install-man \
uninstall \
fi
echo "source ${srcdir}/gdbinit.in" >> .gdbinit
-# Define variables host_canonical and build_canonical
-# because some Cygnus local changes in the Makefile depend on them.
-build_canonical=${build}
-host_canonical=${host}
-target_subdir=
-if test "${host}" != "${target}" ; then
- target_subdir=${target_alias}/
-fi
-
-
-
-
# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
# absolute path for gcc_tooldir based on inserting the number of up-directory
# movements required to get from $(exec_prefix) to $(prefix) into the basic
-# Nothing to do for FLOAT_H, float_format already handled.
objdir=`${PWDCMD-pwd}`
+
+
+
+
+
# Echo that links are built
if test x$host = x$target
then
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
-s%@enable_multilib@%$enable_multilib%g
-s%@enable_shared@%$enable_shared%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@build_canonical@%$build_canonical%g
+s%@host_canonical@%$host_canonical%g
+s%@target_subdir@%$target_subdir%g
s%@CC@%$CC%g
s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
+s%@CPP@%$CPP%g
s%@GNATBIND@%$GNATBIND%g
s%@ADAC@%$ADAC%g
s%@strict1_warn@%$strict1_warn%g
-s%@CPP@%$CPP%g
s%@warn_cflags@%$warn_cflags%g
-s%@stage1_cflags@%$stage1_cflags%g
+s%@WERROR@%$WERROR%g
+s%@nocommon_flag@%$nocommon_flag%g
+s%@valgrind_path@%$valgrind_path%g
+s%@valgrind_path_defines@%$valgrind_path_defines%g
+s%@valgrind_command@%$valgrind_command%g
+s%@coverage_flags@%$coverage_flags%g
+s%@enable_multilib@%$enable_multilib%g
+s%@enable_shared@%$enable_shared%g
+s%@TARGET_SYSTEM_ROOT@%$TARGET_SYSTEM_ROOT%g
+s%@TARGET_SYSTEM_ROOT_DEFINE@%$TARGET_SYSTEM_ROOT_DEFINE%g
+s%@CROSS_SYSTEM_HEADER_DIR@%$CROSS_SYSTEM_HEADER_DIR%g
s%@SET_MAKE@%$SET_MAKE%g
s%@AWK@%$AWK%g
s%@LN@%$LN%g
s%@GENERATED_MANPAGES@%$GENERATED_MANPAGES%g
s%@FLEX@%$FLEX%g
s%@BISON@%$BISON%g
+s%@stage1_cflags@%$stage1_cflags%g
s%@COLLECT2_LIBS@%$COLLECT2_LIBS%g
s%@GNAT_LIBEXC@%$GNAT_LIBEXC%g
+s%@LDEXP_LIB@%$LDEXP_LIB%g
s%@TARGET_GETGROUPS_T@%$TARGET_GETGROUPS_T%g
s%@LIBICONV@%$LIBICONV%g
s%@manext@%$manext%g
s%@inhibit_libc@%$inhibit_libc%g
s%@BUILD_PREFIX@%$BUILD_PREFIX%g
s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
-s%@HOST_CC@%$HOST_CC%g
-s%@HOST_CFLAGS@%$HOST_CFLAGS%g
+s%@BUILD_CC@%$BUILD_CC%g
+s%@BUILD_CFLAGS@%$BUILD_CFLAGS%g
s%@STMP_FIXINC@%$STMP_FIXINC%g
s%@STMP_FIXPROTO@%$STMP_FIXPROTO%g
s%@libgcc_visibility@%$libgcc_visibility%g
s%@zlibdir@%$zlibdir%g
s%@zlibinc@%$zlibinc%g
s%@MAINT@%$MAINT%g
-s%@build_canonical@%$build_canonical%g
-s%@host_canonical@%$host_canonical%g
-s%@target_subdir@%$target_subdir%g
s%@gcc_tooldir@%$gcc_tooldir%g
s%@dollar@%$dollar%g
s%@slibdir@%$slibdir%g
s%@objdir@%$objdir%g
s%@subdirs@%$subdirs%g
+s%@srcdir@%$srcdir%g
s%@all_boot_languages@%$all_boot_languages%g
s%@all_compilers@%$all_compilers%g
s%@all_gtfiles@%$all_gtfiles%g
+s%@all_gtfiles_files_langs@%$all_gtfiles_files_langs%g
+s%@all_gtfiles_files_files@%$all_gtfiles_files_files%g
s%@all_lang_makefiles@%$all_lang_makefiles%g
s%@all_languages@%$all_languages%g
s%@all_stagestuff@%$all_stagestuff%g
s%@host_xm_file_list@%$host_xm_file_list%g
s%@host_xm_file@%$host_xm_file%g
s%@host_xm_defines@%$host_xm_defines%g
+s%@out_host_hook_obj@%$out_host_hook_obj%g
s%@install@%$install%g
s%@lang_options_files@%$lang_options_files%g
s%@lang_specs_files@%$lang_specs_files%g
s%@thread_file@%$thread_file%g
s%@tm_file_list@%$tm_file_list%g
s%@tm_file@%$tm_file%g
+s%@tm_defines@%$tm_defines%g
s%@tm_p_file_list@%$tm_p_file_list%g
s%@tm_p_file@%$tm_p_file%g
s%@xm_file@%$xm_file%g
OSDN Git Service
