ac_help="$ac_help
--enable-checking enable expensive run-time checks."
ac_help="$ac_help
+ --disable-cpp don't provide a user-visible C preprocessor."
+ac_help="$ac_help
+ --with-cpp-install-dir=DIR
+ install the user visible C preprocessor in DIR
+ (relative to PREFIX) as well as PREFIX/bin."
+ac_help="$ac_help
--enable-cpplib use cpplib for the C preprocessor."
ac_help="$ac_help
--enable-c-cpplib link cpplib directly into C and C++ compilers
- (implies --enable-cpplib)."
+ (EXPERIMENTAL) (implies --enable-cpplib)."
ac_help="$ac_help
--enable-c-mbchar enable multibyte characters for C and C++."
ac_help="$ac_help
+ --disable-fast-fixincludes
+ Disable the new fast fixincludes.
+ Run the old fixincludes script unconditionally"
+ac_help="$ac_help
--enable-haifa use the experimental scheduler.
--disable-haifa don't use the experimental scheduler for the
targets which normally enable it."
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:589: checking LIBRARY_PATH variable" >&5
+echo "configure:599: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
if test "$library_path_setting" != "ok"; then
{ echo "configure: error:
*** LIBRARY_PATH shouldn't contain the current directory when
-*** building egcs. Please change the environment variable
+*** building gcc. Please change the environment variable
*** and run configure again." 1>&2; exit 1; }
fi
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:614: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:624: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
if test "$gcc_exec_prefix_setting" != "ok"; then
{ echo "configure: error:
*** GCC_EXEC_PREFIX shouldn't contain the current directory when
-*** building egcs. Please change the environment variable
+*** building gcc. Please change the environment variable
*** and run configure again." 1>&2; exit 1; }
fi
fi
+# Check whether --enable-cpp or --disable-cpp was given.
+if test "${enable_cpp+set}" = set; then
+ enableval="$enable_cpp"
+ :
+else
+ enable_cpp=yes
+fi
+
+
+# Check whether --with-cpp_install_dir or --without-cpp_install_dir was given.
+if test "${with_cpp_install_dir+set}" = set; then
+ withval="$with_cpp_install_dir"
+ if test x$withval = xyes; then
+ { echo "configure: error: option --with-cpp-install-dir requires an argument" 1>&2; exit 1; }
+elif test x$withval != xno; then
+ cpp_install_dir=$withval
+fi
+fi
+
+
# Use cpplib+cppmain for the preprocessor, but don't link it with the compiler.
cpp_main=cccp
# Check whether --enable-cpplib or --disable-cpplib was given.
fi
fi
-
+
+# Disable fast fixincludes
+# Check whether --enable-fast-fixincludes or --disable-fast-fixincludes was given.
+if test "${enable_fast_fixincludes+set}" = set; then
+ enableval="$enable_fast_fixincludes"
+ if test x$enable_fast_fixincludes = xno ; then
+ cp $srcdir/fixincludes ./fixinc.sh
+fi
+fi
+
+
# Enable Haifa scheduler.
# Check whether --enable-haifa or --disable-haifa was given.
if test "${enable_haifa+set}" = set; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:925: checking host system type" >&5
+echo "configure:965: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:946: checking target system type" >&5
+echo "configure:986: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:964: checking build system type" >&5
+echo "configure:1004: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:991: checking for $ac_word" >&5
+echo "configure:1031: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1021: checking for $ac_word" >&5
+echo "configure:1061: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1072: checking for $ac_word" >&5
+echo "configure:1112: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1104: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1144: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1115 "configure"
+#line 1155 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1146: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1186: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1151: checking whether we are using GNU C" >&5
+echo "configure:1191: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1200: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1179: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1219: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1222: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1262: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1250: checking whether a default assembler was specified" >&5
+echo "configure:1290: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1262: checking whether a default linker was specified" >&5
+echo "configure:1302: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1279: checking for $ac_word" >&5
+echo "configure:1319: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1311: checking for $ac_word" >&5
+echo "configure:1351: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1345: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1385: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1353 "configure"
+#line 1393 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1387: checking whether ln works" >&5
+echo "configure:1427: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1419: checking whether ln -s works" >&5
+echo "configure:1459: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1451: checking for volatile" >&5
+echo "configure:1491: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1456 "configure"
+#line 1496 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1463: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1503: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1486: checking for $ac_word" >&5
+echo "configure:1526: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1518: checking for $ac_word" >&5
+echo "configure:1558: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1559: checking for a BSD compatible install" >&5
+echo "configure:1599: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1610: checking how to run the C preprocessor" >&5
+echo "configure:1650: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1625 "configure"
+#line 1665 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1631: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1642 "configure"
+#line 1682 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1688: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1659 "configure"
+#line 1699 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1665: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1705: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1690: checking for ANSI C header files" >&5
+echo "configure:1730: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1695 "configure"
+#line 1735 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1703: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1720 "configure"
+#line 1760 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1738 "configure"
+#line 1778 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1759 "configure"
+#line 1799 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1794: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1834: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1799 "configure"
+#line 1839 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1808: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1848: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:1829: checking whether string.h and strings.h may both be included" >&5
+echo "configure:1869: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1834 "configure"
+#line 1874 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:1842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1882: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1863: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1903: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1868 "configure"
+#line 1908 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1884: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1924: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
-for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h fcntl.h unistd.h stab.h sys/file.h sys/time.h sys/resource.h sys/param.h sys/times.h sys/stat.h
+for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h fcntl.h unistd.h stab.h sys/file.h sys/time.h sys/resource.h sys/param.h sys/times.h sys/stat.h direct.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1908: checking for $ac_hdr" >&5
+echo "configure:1948: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1913 "configure"
+#line 1953 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1918: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:1948: checking for thread.h" >&5
+echo "configure:1988: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1953 "configure"
+#line 1993 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:1982: checking for pthread.h" >&5
+echo "configure:2022: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1987 "configure"
+#line 2027 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2032: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2019: checking for $ac_word" >&5
+echo "configure:2059: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# See if the system preprocessor understands the ANSI C preprocessor
# stringification operator.
echo $ac_n "checking whether cpp understands the stringify operator""... $ac_c" 1>&6
-echo "configure:2050: checking whether cpp understands the stringify operator" >&5
+echo "configure:2090: checking whether cpp understands the stringify operator" >&5
if eval "test \"`echo '$''{'gcc_cv_c_have_stringify'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2055 "configure"
+#line 2095 "configure"
#include "confdefs.h"
int main() {
char *test = S(foo);
; return 0; }
EOF
-if { (eval echo configure:2063: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2103: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_have_stringify=yes
else
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2086: checking for inttypes.h" >&5
+echo "configure:2126: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2091 "configure"
+#line 2131 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2099: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2139: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
fputs_unlocked
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2125: checking for $ac_func" >&5
+echo "configure:2165: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2130 "configure"
+#line 2170 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#AC_CHECK_TYPE(wchar_t, unsigned int)
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2182: checking for vprintf" >&5
+echo "configure:2222: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2187 "configure"
+#line 2227 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:2210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2234: checking for _doprnt" >&5
+echo "configure:2274: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2239 "configure"
+#line 2279 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2298: checking whether the printf functions support %p" >&5
+echo "configure:2338: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2306 "configure"
+#line 2346 "configure"
#include "confdefs.h"
#include <stdio.h>
exit (p != q);
}
EOF
-if { (eval echo configure:2319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2352: checking for pid_t" >&5
+echo "configure:2392: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2357 "configure"
+#line 2397 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2386: checking for vfork.h" >&5
+echo "configure:2426: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2391 "configure"
+#line 2431 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2396: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2436: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2421: checking for working vfork" >&5
+echo "configure:2461: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2427: checking for vfork" >&5
+echo "configure:2467: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2432 "configure"
+#line 2472 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2477 "configure"
+#line 2517 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2612: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
strsignal putc_unlocked fputs_unlocked
do
echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2600: checking whether $ac_func must be declared" >&5
+echo "configure:2640: checking whether $ac_func must be declared" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2605 "configure"
+#line 2645 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) $ac_func
; return 0; }
EOF
-if { (eval echo configure:2638: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2678: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_decl_needed_$ac_func=no"
else
for ac_func in getrlimit setrlimit
do
echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2667: checking whether $ac_func must be declared" >&5
+echo "configure:2707: checking whether $ac_func must be declared" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2672 "configure"
+#line 2712 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) $ac_func
; return 0; }
EOF
-if { (eval echo configure:2709: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2749: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_decl_needed_$ac_func=no"
else
echo $ac_n "checking for sys_siglist declaration in signal.h or unistd.h""... $ac_c" 1>&6
-echo "configure:2736: checking for sys_siglist declaration in signal.h or unistd.h" >&5
+echo "configure:2776: checking for sys_siglist declaration in signal.h or unistd.h" >&5
if eval "test \"`echo '$''{'ac_cv_decl_sys_siglist'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2741 "configure"
+#line 2781 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
char *msg = *(sys_siglist + 1);
; return 0; }
EOF
-if { (eval echo configure:2753: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2793: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_decl_sys_siglist=yes
else
fi
+# mkdir takes a single argument on some systems.
+echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
+echo "configure:2816: checking if mkdir takes one argument" >&5
+if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2821 "configure"
+#include "confdefs.h"
+
+#include <sys/types.h>
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+#ifdef HAVE_DIRECT_H
+# include <direct.h>
+#endif
+int main() {
+mkdir ("foo", 0);
+; return 0; }
+EOF
+if { (eval echo configure:2838: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_mkdir_takes_one_arg=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_mkdir_takes_one_arg=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gcc_cv_mkdir_takes_one_arg" 1>&6
+if test $gcc_cv_mkdir_takes_one_arg = yes ; then
+ cat >> confdefs.h <<\EOF
+#define MKDIR_TAKES_ONE_ARG 1
+EOF
+
+fi
+
+
# File extensions
manext='.1'
objext='.o'
host_truncate_target=
host_exeext=
-# It is relative to $prefix.
-cpp_install_dir=
-
# Decode the host machine, then the target machine.
# For the host machine, we save the xm_file variable as host_xm_file;
# then we decode the target machine and forget everything else
;;
*-*-openbsd*)
tm_file=${cpu_type}/openbsd.h
- # On OpenBSD systems, the headers are okay
- fixincludes=Makefile.in
tmake_file="t-libc-ok t-openbsd"
# avoid surprises, always provide an xm-openbsd file
xm_file=${cpu_type}/xm-openbsd.h
+ # don't depend on processor x-fragments as well
+ xmake_file=none
if test x$enable_threads = xyes; then
thread_file='posix'
tmake_file="${tmake_file} t-openbsd-thread"
a29k-*-*) # Default a29k environment.
use_collect2=yes
;;
+ alpha-*-interix)
+ tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h"
+
+ # GAS + IEEE_CONFORMANT+IEEE (no inexact);
+ #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE"
+
+ # GAS + IEEE_CONFORMANT
+ target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"
+
+ xm_file="alpha/xm-alpha-interix.h xm-interix.h"
+ xmake_file="x-interix alpha/t-pe"
+ tmake_file="alpha/t-interix"
+ if test x$enable_threads = xyes ; then
+ thread_file='posix'
+ fi
+ if test x$stabs = xyes ; then
+ tm_file="${tm_file} dbxcoff.h"
+ fi
+ #prefix='$$INTERIX_ROOT'/usr/contrib
+ #local_prefix='$$INTERIX_ROOT'/usr/contrib
+ ;;
alpha*-*-linux-gnuecoff*)
tm_file="${tm_file} alpha/linux-ecoff.h alpha/linux.h"
target_cpu_default="MASK_GAS"
alpha*-*-openbsd*)
# default x-alpha is only appropriate for dec-osf.
target_cpu_default="MASK_GAS"
- xmake_file=none
;;
alpha*-dec-osf*)
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
+ thread_file='vxworks'
;;
alpha*-*-winnt*)
- tm_file="${tm_file} alpha/win-nt.h"
+ tm_file="${tm_file} alpha/alpha32.h alpha/win-nt.h winnt/win-nt.h"
xm_file="${xm_file} config/winnt/xm-winnt.h alpha/xm-winnt.h"
tmake_file=t-libc-ok
xmake_file=winnt/x-winnt
arm-*-vxworks*)
tm_file=arm/vxarm.h
tmake_file=arm/t-bare
+ thread_file='vxworks'
;;
arm-*-riscix1.[01]*) # Acorn RISC machine (early versions)
tm_file=arm/riscix1-1.h
tm_file=arm/netbsd.h
xm_file="arm/xm-netbsd.h ${xm_file}"
tmake_file="t-netbsd arm/t-netbsd"
+ use_collect2=yes
;;
arm*-*-linux-gnuaout*) # ARM GNU/Linux with a.out
cpu_type=arm
float_format=i32
;;
hppa*-*-openbsd*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tmake_file=pa/t-openbsd
;;
hppa1.1-*-pro*)
tmake_file=pa/t-pro
;;
hppa1.1-*-osf*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa-osf.h"
use_collect2=yes
;;
use_collect2=yes
;;
hppa1.1-*-bsd*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
use_collect2=yes
;;
hppa1.0-*-bsd*)
use_collect2=yes
;;
hppa1.1-*-hpux8.0[0-2]*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
use_collect2=yes
;;
hppa1.1-*-hpux8*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa-hpux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
use_collect2=yes
;;
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux10.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
use_collect2=yes
;;
hppa1.1-*-hpux* | hppa2*-*-hpux*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hpux9.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
use_collect2=yes
;;
hppa1.1-*-hiux* | hppa2*-*-hiux*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa-hpux.h pa/pa-hiux.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
use_collect2=yes
;;
hppa*-*-lites*)
- target_cpu_default="MASK_SNAKE"
+ target_cpu_default="MASK_PA_11"
use_collect2=yes
;;
i370-*-mvs*)
i[34567]86-wrs-vxworks*)
tm_file=i386/vxi386.h
tmake_file=i386/t-i386bare
+ thread_file='vxworks'
;;
i[34567]86-*-aout*)
tm_file=i386/i386-aout.h
# use_collect2=yes
;;
i[34567]86-*-freebsdelf*)
- tm_file="i386/i386.h i386/att.h linux.h i386/freebsd-elf.h i386/perform.h"
- # On FreeBSD, the headers are already ok, except for math.h.
- fixincludes=fixinc.wrap
+ tm_file="i386/i386.h i386/att.h svr4.h i386/freebsd-elf.h i386/perform.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- tmake_file=i386/t-freebsd
+ tmake_file=t-freebsd
gas=yes
gnu_ld=yes
stabs=yes
;;
i[34567]86-*-freebsd*)
tm_file=i386/freebsd.h
- tmake_file=i386/t-freebsd
+ tmake_file=t-freebsd
;;
i[34567]86-*-netbsd*)
tm_file=i386/netbsd.h
tmake_file=t-netbsd
+ use_collect2=yes
;;
i[34567]86-*-openbsd*)
- # Remove when the math emulator is fixed
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
tmake_file=i386/t-crtpic
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
;;
i[34567]86-*-sysv4*) # Intel 80386's running system V.4
xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
tmake_file="i386/t-crtpic i386/t-udk"
xmake_file=x-svr4
extra_parts="crtbegin.o crtend.o"
+ install_headers_dir=install-headers-cpio
;;
i[34567]86-*-osf1*) # Intel 80386's running OSF/1 1.3+
cpu_type=i386
tmake_file="i386/t-cygwin i386/t-uwin"
extra_objs=winnt.o
xmake_file=i386/x-cygwin
- fixincludes=Makefile.in
if test x$enable_threads = xyes; then
thread_file='win32'
fi
exeext=.exe
;;
i[34567]86-*-interix*)
- tm_file=i386/interix.h
- xm_file="${xm_file} xm-interix.h"
+ tm_file="i386/i386-interix.h interix.h"
+ xm_file="i386/xm-i386-interix.h xm-interix.h"
xm_defines="USG NO_SYS_SIGLIST"
tmake_file="i386/t-interix"
extra_objs=interix.o
xmake_file=x-interix
- fixincludes=fixinc.interix
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes ; then
thread_file='posix'
fi
- if [ x$stabs = xyes ]; then
+ if test x$stabs = xyes ; then
tm_file="${tm_file} dbxcoff.h"
fi
;;
;;
m68k-hp-bsd4.4*) # HP 9000/3xx running 4.4bsd
tm_file=m68k/hp3bsd44.h
- xmake_file=m68k/x-hp3bsd44
use_collect2=yes
extra_headers=math-68881.h
float_format=m68k
tm_file=m68k/netbsd.h
tmake_file=t-netbsd
float_format=m68k
+ use_collect2=yes
;;
m68k*-*-openbsd*)
float_format=m68k
# fi
;;
mips-wrs-vxworks)
- tm_file="mips/elf.h libgloss.h"
+ tm_file="mips/elf.h libgloss.h mips/vxworks.h"
tmake_file=mips/t-ecoff
gas=yes
gnu_ld=yes
extra_parts="crtbegin.o crtend.o"
gnu_ld=yes
gas=yes
- fixincludes=Makefile.in
;;
mips*el-*-openbsd*) # mips little endian
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file=mips/openbsd.h
- xmake_file=none
;;
mips*-*-openbsd*) # mips big endian
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file=mips/openbsd-be.h
- xmake_file=none
;;
mips-sony-bsd* | mips-sony-newsos*) # Sony NEWS 3600 or risc/news.
tm_file="mips/news4.h ${tm_file}"
;;
mipsel-*-elf*)
tm_file="mips/elfl.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tmake_file=mips/t-elf
;;
mips-*-elf*)
- tm_file="mips/elf.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elf.h"
+ tmake_file=mips/t-elf
;;
mips64el-*-elf*)
- tm_file="mips/elfl64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elfl64.h"
+ tmake_file=mips/t-elf
;;
mips64orionel-*-elf*)
tm_file="mips/elforion.h mips/elfl64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tmake_file=mips/t-elf
;;
mips64-*-elf*)
- tm_file="mips/elf64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tm_file="mips/elf64.h"
+ tmake_file=mips/t-elf
;;
mips64orion-*-elf*)
tm_file="mips/elforion.h mips/elf64.h libgloss.h"
- tmake_file=mips/t-ecoff
+ tmake_file=mips/t-elf
;;
mips64orion-*-rtems*)
tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h"
tmake_file="mips/t-ecoff t-rtems"
;;
mipstx39el-*-elf*)
- tm_file="mips/r3900.h mips/elfl.h mips/abi64.h libgloss.h"
+ tm_file="mips/r3900.h mips/elfl.h mips/abi64.h"
tmake_file=mips/t-r3900
;;
mipstx39-*-elf*)
- tm_file="mips/r3900.h mips/elf.h mips/abi64.h libgloss.h"
+ tm_file="mips/r3900.h mips/elf.h mips/abi64.h"
tmake_file=mips/t-r3900
- # FIXME mips-elf should be fixed to use crtstuff.
- use_collect2=yes
;;
mips-*-*) # Default MIPS RISC-OS 4.0.
if test x$stabs = xyes; then
xm_file="ns32k/xm-netbsd.h ${xm_file}"
# On NetBSD, the headers are already okay, except for math.h.
tmake_file=t-netbsd
+ use_collect2=yes
;;
pdp11-*-bsd)
tm_file="${tm_file} pdp11/2bsd.h"
;;
powerpc-*-openbsd*)
tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd"
- xmake_file=none
;;
powerpc-*-beos*)
cpu_type=rs6000
use_collect2=yes
;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
- if test "$gnu_ld" = yes
- then
- tm_file=rs6000/aix41-gld.h
- else
- tm_file=rs6000/aix41.h
- fi
+ tm_file=rs6000/aix41.h
if test x$host != x$target
then
tmake_file=rs6000/t-xnewas
else
tmake_file=rs6000/t-newas
fi
- xmake_file=rs6000/x-aix41
+ if test "$gnu_ld" = yes
+ then
+ xmake_file=rs6000/x-aix41-gld
+ else
+ xmake_file=rx6000/x-aix41
+ fi
float_format=none
use_collect2=yes
;;
sparc-*-netbsd*)
tm_file=sparc/netbsd.h
tmake_file=t-netbsd
+ use_collect2=yes
;;
sparc-*-openbsd*)
# we need collect2 until our bug is fixed...
tmake_file="sparc/t-halos sparc/t-sol2"
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
- fixincludes=fixinc.svr4
broken_install=yes
;;
sparc-*-solaris2*)
md_file=arm/thumb.md
tmake_file=arm/t-thumb
;;
+ thumb-wrs-vxworks)
+ tm_file=arm/tcoff.h
+ out_file=arm/thumb.c
+ xm_file=arm/xm-thumb.h
+ md_file=arm/thumb.md
+ tmake_file=arm/t-thumb
+ thread_file='vxworks'
+ ;;
# This hasn't been upgraded to GCC 2.
# tron-*-*)
# cpu_type=gmicro
tm_file="${tm_file} netbsd.h vax/netbsd.h"
tmake_file=t-netbsd
float_format=vax
+ use_collect2=yes
;;
vax-*-openbsd*)
- tmake_file="${tm_file} vax/t-openbsd"
+ tmake_file="${tmake_file} vax/t-openbsd"
;;
vax-*-ultrix*) # vaxen running ultrix
tm_file="${tm_file} vax/ultrix.h"
target_cpu_default2=1
;;
i586-*-*)
- target_cpu_default2=2
+ case $target_alias in
+ k6-*)
+ target_cpu_default2=4
+ ;;
+ *)
+ target_cpu_default2=2
+ ;;
+ esac
;;
i686-*-* | i786-*-*)
target_cpu_default2=3
alpha*-*-*)
case $machine in
alphaev6*)
- target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_CIX|MASK_MAX"
+ target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
;;
alphapca56*)
target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
fi
# Handle cpp installation.
-if [ x$enable_cpp != x ]
+if test x$enable_cpp != xno
then
tmake_file="$tmake_file t-install-cpp"
fi
# auto-host.h is the file containing items generated by autoconf and is
# the first file included by config.h.
null_defines=
-host_xm_file="auto-host.h gansidecl.h ${host_xm_file}"
+host_xm_file="auto-host.h gansidecl.h ${host_xm_file} hwint.h"
# If host=build, it is correct to have hconfig include auto-host.h
# as well. If host!=build, we are in error and need to do more
# work to find out the build config parameters.
if test x$host = x$build
then
- build_xm_file="auto-host.h gansidecl.h ${build_xm_file}"
+ build_xm_file="auto-host.h gansidecl.h ${build_xm_file} hwint.h"
else
# We create a subdir, then run autoconf in the subdir.
# To prevent recursion we set host and build for the new
mv auto-host.h ../auto-build.h
cd ..
rm -rf $tempdir
- build_xm_file="auto-build.h gansidecl.h ${build_xm_file}"
+ build_xm_file="auto-build.h gansidecl.h ${build_xm_file} hwint.h"
fi
xm_file="gansidecl.h ${xm_file}"
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:5923: checking for strerror in -lcposix" >&5
+echo "configure:6040: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5931 "configure"
+#line 6048 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:5942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5965: checking for working const" >&5
+echo "configure:6082: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5970 "configure"
+#line 6087 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6019: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6136: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6040: checking for inline" >&5
+echo "configure:6157: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 6047 "configure"
+#line 6164 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:6054: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6171: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6080: checking for off_t" >&5
+echo "configure:6197: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6085 "configure"
+#line 6202 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6113: checking for size_t" >&5
+echo "configure:6230: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6118 "configure"
+#line 6235 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6148: checking for working alloca.h" >&5
+echo "configure:6265: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6153 "configure"
+#line 6270 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6181: checking for alloca" >&5
+echo "configure:6298: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6186 "configure"
+#line 6303 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6246: checking whether alloca needs Cray hooks" >&5
+echo "configure:6363: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6251 "configure"
+#line 6368 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6276: checking for $ac_func" >&5
+echo "configure:6393: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6281 "configure"
+#line 6398 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6331: checking stack direction for C alloca" >&5
+echo "configure:6448: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 6339 "configure"
+#line 6456 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:6358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6383: checking for $ac_hdr" >&5
+echo "configure:6500: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6388 "configure"
+#line 6505 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6393: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6422: checking for $ac_func" >&5
+echo "configure:6539: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6427 "configure"
+#line 6544 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:6475: checking for working mmap" >&5
+echo "configure:6592: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 6483 "configure"
+#line 6600 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:6623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6651: checking for $ac_hdr" >&5
+echo "configure:6768: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6656 "configure"
+#line 6773 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6661: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6778: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6691: checking for $ac_func" >&5
+echo "configure:6808: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6696 "configure"
+#line 6813 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6748: checking for $ac_func" >&5
+echo "configure:6865: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6753 "configure"
+#line 6870 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:6810: checking for LC_MESSAGES" >&5
+echo "configure:6927: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6815 "configure"
+#line 6932 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:6822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:6843: checking whether NLS is requested" >&5
+echo "configure:6960: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:6863: checking whether included gettext is requested" >&5
+echo "configure:6980: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6882: checking for libintl.h" >&5
+echo "configure:6999: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6887 "configure"
+#line 7004 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:6909: checking for gettext in libc" >&5
+echo "configure:7026: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6914 "configure"
+#line 7031 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:6921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:6937: checking for bindtextdomain in -lintl" >&5
+echo "configure:7054: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6945 "configure"
+#line 7062 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:6956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:6972: checking for gettext in libintl" >&5
+echo "configure:7089: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:6977: checking for gettext in -lintl" >&5
+echo "configure:7094: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6985 "configure"
+#line 7102 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:6996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7035: checking for $ac_word" >&5
+echo "configure:7152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7069: checking for $ac_func" >&5
+echo "configure:7186: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7074 "configure"
+#line 7191 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7124: checking for $ac_word" >&5
+echo "configure:7241: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7160: checking for $ac_word" >&5
+echo "configure:7277: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 7192 "configure"
+#line 7309 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:7200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7223: checking whether catgets can be used" >&5
+echo "configure:7340: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7236: checking for main in -li" >&5
+echo "configure:7353: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7244 "configure"
+#line 7361 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7279: checking for catgets" >&5
+echo "configure:7396: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7284 "configure"
+#line 7401 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:7307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7329: checking for $ac_word" >&5
+echo "configure:7446: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7365: checking for $ac_word" >&5
+echo "configure:7482: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7402: checking for $ac_word" >&5
+echo "configure:7519: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7437: checking for $ac_word" >&5
+echo "configure:7554: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7495: checking for $ac_word" >&5
+echo "configure:7612: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7529: checking for $ac_word" >&5
+echo "configure:7646: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7565: checking for $ac_word" >&5
+echo "configure:7682: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:7658: checking for catalogs to be installed" >&5
+echo "configure:7775: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:7686: checking for linux/version.h" >&5
+echo "configure:7803: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7691 "configure"
+#line 7808 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
tm_file_list=
for f in $tm_file; do
- if test $f != "gansidecl.h" ; then
- tm_file_list="${tm_file_list} \$(srcdir)/config/$f"
- else
- tm_file_list="${tm_file_list} $f"
- fi
+ case $f in
+ gansidecl.h )
+ tm_file_list="${tm_file_list} $f" ;;
+ *) tm_file_list="${tm_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
host_xm_file_list=
for f in $host_xm_file; do
- if test $f != "auto-host.h" -a $f != "gansidecl.h" ; then
- host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f"
- else
- host_xm_file_list="${host_xm_file_list} $f"
- fi
+ case $f in
+ auto-host.h | gansidecl.h | hwint.h )
+ host_xm_file_list="${host_xm_file_list} $f" ;;
+ *) host_xm_file_list="${host_xm_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
build_xm_file_list=
for f in $build_xm_file; do
- if test $f != "auto-build.h" -a $f != "auto-host.h" -a $f != "gansidecl.h" ; then
- build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f"
- else
- build_xm_file_list="${build_xm_file_list} $f"
- fi
+ case $f in
+ auto-build.h | auto-host.h | gansidecl.h | hwint.h )
+ build_xm_file_list="${build_xm_file_list} $f" ;;
+ *) build_xm_file_list="${build_xm_file_list} \$(srcdir)/config/$f" ;;
+ esac
done
# Define macro CROSS_COMPILE in compilation
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7930: checking assembler alignment features" >&5
+echo "configure:8047: checking assembler alignment features" >&5
gcc_cv_as=
gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
fi
elif test x$host = x$target; then
# Native build.
- gcc_cv_as=as$host_exeext
+ # Search the same directories that the installed compiler will
+ # search. Else we may find the wrong assembler and lose. If we
+ # do not find a suitable assembler binary, then try the user's
+ # path.
+ #
+ # Also note we have to check MD_EXEC_PREFIX before checking the
+ # user's path. Unfortunately, there is no good way to get at the
+ # value of MD_EXEC_PREFIX here. So we do a brute force search
+ # through all the known MD_EXEC_PREFIX values. Ugh. This needs
+ # to be fixed as part of the make/configure rewrite too.
+
+ if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ test_prefix=/usr/local
+ else
+ test_prefix=$prefix
+ fi
+ else
+ test_prefix=$exec_prefix
+ fi
+
+ # If the loop below does not find an assembler, then use whatever
+ # one we can find in the users's path.
+ # user's path.
+ as=as$host_exeext
+
+ test_dirs="$test_prefix/lib/gcc-lib/$target/$gcc_version \
+ $test_prefix/lib/gcc-lib/$target \
+ /usr/lib/gcc/$target/$gcc_version \
+ /usr/lib/gcc/$target \
+ $test_prefix/$target/bin/$target/$gcc_version \
+ $test_prefix/$target/bin \
+ /usr/libexec \
+ /usr/ccs/gcc \
+ /usr/ccs/bin \
+ /udk/usr/ccs/bin \
+ /bsd43/usr/lib/cmplrs/cc \
+ /usr/cross64/usr/bin \
+ /usr/lib/cmplrs/cc \
+ /sysv/usr/lib/cmplrs/cc \
+ /svr4/usr/lib/cmplrs/cc \
+ /usr/bin"
+
+ for dir in $test_dirs; do
+ if test -f $dir/as$host_exeext; then
+ gcc_cv_as=$dir/as$host_exeext
+ break;
+ fi
+ done
fi
if test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8003: checking assembler subsection support" >&5
+echo "configure:8168: checking assembler subsection support" >&5
gcc_cv_as_subsections=
if test x$gcc_cv_as != x; then
# Check if we have .subsection
fi
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
+echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
+echo "configure:8208: checking assembler instructions" >&5
+gcc_cv_as_instructions=
+if test x$gcc_cv_as != x; then
+ set "filds fists" "filds mem; fists mem"
+ while test $# -gt 0
+ do
+ echo "$2" > conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+ gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" "
+ cat >> confdefs.h <<EOF
+#define HAVE_GAS_`echo "$1" | tr 'a-z ' 'A-Z_'` 1
+EOF
+
+ fi
+ shift 2
+ done
+ rm -f conftest.s conftest.o
+fi
+echo "$ac_t""$gcc_cv_as_instructions" 1>&6
+
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
OSDN Git Service
