# GCC target-specific configuration file.
-# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
#This file is part of GCC.
#
# extra_programs Like extra_passes, but these are used when linking.
#
+# extra_options List of target-dependent .opt files.
+#
# c_target_objs List of extra target-dependent objects that be
# linked into the C compiler only.
#
extra_programs=
extra_objs=
extra_gcc_objs=
+extra_options=
c_target_objs=
cxx_target_objs=
tm_defines=
# Obsolete configurations.
case ${target} in
- dummy*)
+ sparc-*-openbsd* \
+ | i860-*-sysv4* \
+ | ip2k-*-elf \
+ | ns32k-*-netbsdelf* \
+ | ns32k-*-netbsd* \
+ | c4x-* \
+ | tic4x-* \
+ )
if test "x$enable_obsolete" != xyes; then
echo "*** Configuration ${target} is obsolete." >&2
echo "*** Specify --enable-obsolete to build it anyway." >&2
# machines.
tm_p_file=
cpu_type=`echo ${target} | sed 's/-.*$//'`
+cpu_is_64bit=
case ${target} in
alpha*-*-*)
cpu_type=alpha
cpu_type=arm
extra_headers="mmintrin.h"
;;
+bfin*-*)
+ cpu_type=bfin
+ ;;
ep9312*-*-*)
cpu_type=arm
;;
;;
i[34567]86-*-*)
cpu_type=i386
- extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h"
+ extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
;;
x86_64-*-*)
cpu_type=i386
- extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h"
+ extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
need_64bit_hwint=yes
;;
ia64-*-*)
cpu_type=rs6000
extra_headers="ppc-asm.h altivec.h spe.h"
need_64bit_hwint=yes
+ case x$with_cpu in
+ xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345]|xrs64a)
+ cpu_is_64bit=yes
+ ;;
+ esac
;;
rs6000*-*-*)
need_64bit_hwint=yes
cpu_type=sparc
;;
s390*-*-*)
+ cpu_type=s390
need_64bit_hwint=yes
;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
then
extra_modes=${cpu_type}/${cpu_type}-modes.def
fi
+if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
+then
+ extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
+fi
case ${target} in
x86_64-*-*)
case ${target} in
*-*-darwin*)
case ${target} in
+ *-darwin1[0-9]*) tm_file="${tm_file} darwin8.h" ;;
*-darwin[0-6]*) ;;
- *) tm_file="${tm_file} darwin7.h" ;;
+ *-darwin7*) tm_file="${tm_file} darwin7.h" ;;
+ *) tm_file="${tm_file} darwin8.h" ;;
esac
tm_file="${tm_file} darwin.h"
tm_p_file="${tm_p_file} darwin-protos.h"
tmake_file="t-darwin t-slibgcc-darwin"
target_gtfiles="\$(srcdir)/config/darwin.c"
+ extra_options="${extra_options} darwin.opt"
c_target_objs="darwin-c.o"
cxx_target_objs="darwin-c.o"
extra_parts="crt2.o"
tmake_file="${tmake_file} t-openbsd-thread"
;;
esac
+ case ${target} in
+ *-*-openbsd2.*|*-*-openbsd3.[012])
+ tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
+ esac
;;
*-*-rtems*)
case ${enable_threads} in
extra_headers=va_list.h
case ${target} in
*-*-osf4*)
- # Set target_cpu_default except on 4.0a.
+ # Define TARGET_SUPPORT_ARCH except on 4.0a.
case ${target} in
*-*-osf4.0a) ;;
- *) target_cpu_default=MASK_SUPPORT_ARCH
+ *) tm_defines="TARGET_SUPPORT_ARCH=1"
esac
;;
*-*-osf5*)
tm_file="${tm_file} alpha/osf5.h"
- target_cpu_default=MASK_SUPPORT_ARCH
+ tm_defines="TARGET_SUPPORT_ARCH=1"
;;
esac
case ${enable_threads} in
;;
arm-*-coff* | armel-*-coff*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
- tmake_file=arm/t-arm-coff
+ tmake_file="arm/t-arm arm/t-arm-coff"
;;
arm-semi-aof | armel-semi-aof)
tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
- tmake_file=arm/t-semi
+ tmake_file="arm/t-arm arm/t-semi"
;;
arm-wrs-vxworks)
tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
- tmake_file="${tmake_file} arm/t-vxworks"
+ tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
;;
arm*-*-freebsd*|strongarm*-*-freebsd*)
tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
- tmake_file="${tmake_file} arm/t-strongarm-elf"
+ tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
;;
arm*-*-netbsdelf*)
tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
- tmake_file="${tmake_file} arm/t-netbsd"
+ tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
;;
arm*-*-netbsd*)
tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
- tmake_file="t-netbsd arm/t-netbsd"
+ tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
extra_parts=""
use_collect2=yes
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
- tmake_file="${tmake_file} arm/t-linux"
+ tmake_file="${tmake_file} arm/t-arm arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
;;
arm*-*-uclinux*) # ARM ucLinux
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
- tmake_file=arm/t-arm-elf
+ tmake_file="arm/t-arm arm/t-arm-elf"
;;
arm*-*-ecos-elf)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
- tmake_file=arm/t-arm-elf
+ tmake_file="arm/t-arm arm/t-arm-elf"
+ ;;
+arm*-*-eabi* | arm*-*-symbianelf* )
+ # The BPABI long long divmod functions return a 128-bit value in
+ # registers r0-r3. Correctly modeling that requires the use of
+ # TImode.
+ need_64bit_hwint=yes
+ default_use_cxa_atexit=yes
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
+ tmake_file="arm/t-arm arm/t-arm-elf"
+ case ${target} in
+ arm*-*-eabi*)
+ tmake_file="${tmake_file} arm/t-bpabi"
+ ;;
+ arm*-*-symbianelf*)
+ tm_file="${tm_file} arm/symbian.h"
+ # We do not include t-bpabi for Symbian OS because the system
+ # provides its own implementation of the BPABI functions.
+ tmake_file="${tmake_file} t-slibgcc-elf-ver arm/t-symbian"
+ ;;
+ esac
+ tm_file="${tm_file} arm/aout.h arm/arm.h"
;;
arm*-*-rtems*)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
- tmake_file="arm/t-arm-elf t-rtems"
+ tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
;;
arm*-*-elf | ep9312-*-elf)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-arm-elf
+ tmake_file="arm/t-arm arm/t-arm-elf"
;;
arm*-wince-pe*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
- tmake_file=arm/t-wince-pe
+ tmake_file="arm/t-arm arm/t-wince-pe"
+ extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
arm-*-pe*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
- tmake_file=arm/t-pe
+ tmake_file="arm/t-arm arm/t-pe"
+ extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
arm*-*-kaos*)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
- tmake_file=arm/t-arm-elf
+ tmake_file="arm/t-arm arm/t-arm-elf"
+ ;;
+avr-*-rtems*)
+ tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
+ tmake_file="avr/t-avr t-rtems avr/t-rtems"
;;
avr-*-*)
tm_file="avr/avr.h dbxelf.h"
use_fixproto=yes
;;
+bfin*-elf*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
+ tmake_file=bfin/t-bfin-elf
+ use_collect2=no
+ ;;
+bfin*-*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
+ tmake_file=bfin/t-bfin
+ use_collect2=no
+ ;;
c4x-*-rtems* | tic4x-*-rtems*)
- tmake_file="c4x/t-c4x t-rtems"
+ tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
c_target_objs="c4x-c.o"
cxx_target_objs="c4x-c.o"
tm_file="dbxelf.h ${tm_file} cris/aout.h"
gas=yes
tmake_file="cris/t-cris cris/t-aout"
+ extra_options="${extra_options} cris/aout.opt"
;;
cris-*-elf | cris-*-none)
tm_file="dbxelf.h elfos.h ${tm_file}"
tmake_file="cris/t-cris cris/t-elfmulti"
gas=yes
+ extra_options="${extra_options} cris/elf.opt"
;;
cris-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
# We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
+ extra_options="${extra_options} cris/linux.opt"
;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
linux.h frv/linux.h frv/frv-abi.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
-h8300-*-rtems*)
- tmake_file="h8300/t-h8300 t-rtems"
+h8300-*-rtemscoff*)
+ tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
;;
+h8300-*-rtems*)
+ tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
+ tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
+ ;;
h8300-*-elf*)
tmake_file="h8300/t-h8300 h8300/t-elf"
tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
use_fixproto=yes
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
- target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_BIG_SWITCH)"
+ target_cpu_default="MASK_PA_11|MASK_PA_20"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
tmake_file="${tmake_file} pa/t-linux64"
need_64bit_hwint=yes
;;
hppa*-*-linux* | parisc*-*-linux*)
- target_cpu_default="(MASK_PA_11 | MASK_NO_SPACE_REGS | MASK_BIG_SWITCH)"
+ target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="${tmake_file} pa/t-linux"
;;
# port not yet contributed.
#hppa*-*-openbsd*)
-# target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
+# target_cpu_default="MASK_PA_11"
# ;;
hppa1.1-*-pro*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT | MASK_BIG_SWITCH)"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
+ target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
+ pa/pa-pro-end.h libgloss.h"
tmake_file="pa/t-pro"
;;
hppa1.1-*-osf*)
- target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
tmake_file="pa/t-pa"
use_collect2=yes
;;
-hppa1.1-*-rtems*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT | MASK_BIG_SWITCH)"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
- tmake_file="pa/t-pro t-rtems"
- ;;
hppa1.1-*-bsd*)
- target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
+ target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
tmake_file="pa/t-pa"
use_collect2=yes
;;
-hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
- target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- case ${enable_threads} in
- "")
- if test x$have_pthread_h = xyes ; then
- tmake_file="${tmake_file} pa/t-dce-thr"
- fi
- ;;
- yes | dce)
- tmake_file="${tmake_file} pa/t-dce-thr"
- ;;
+hppa[12]*-*-hpux10*)
+ case ${target} in
+ hppa1.1-*-* | hppa2*-*-*)
+ target_cpu_default="MASK_PA_11"
+ ;;
+ esac
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
+ pa/pa-hpux.h pa/pa-hpux10.h"
+ extra_options="${extra_options} pa/pa-hpux.opt"
+ case ${target} in
+ *-*-hpux10.[1-9]*)
+ tm_file="${tm_file} pa/pa-hpux1010.h"
+ extra_options="${extra_options} pa/pa-hpux1010.opt"
+ ;;
esac
- use_collect2=yes
- use_fixproto=yes
- ;;
-hppa1.0-*-hpux10*)
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
case ${enable_threads} in
"")
use_fixproto=yes
;;
hppa*64*-*-hpux11*)
+ target_cpu_default="MASK_PA_11|MASK_PA_20"
if test x$gnu_ld = xyes
then
- target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_GAS | MASK_GNU_LD | MASK_BIG_SWITCH)"
- else
- target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_GAS | MASK_BIG_SWITCH)"
+ target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
if test x$gas = xyes
then
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
- pa/pa64-regs.h pa/pa-hpux.h \
- pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
+ pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
+ pa/pa-hpux11.h"
else
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
- pa/pa64-regs.h pa/pa-hpux.h \
- pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
+ pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
+ pa/pa-hpux11.h"
fi
+ case ${target} in
+ *-*-hpux11.[1-9]*)
+ tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
+ extra_options="${extra_options} pa/pa-hpux1111.opt"
+ ;;
+ *)
+ tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
+ ;;
+ esac
+ extra_options="${extra_options} pa/pa-hpux.opt \
+ pa/pa-hpux1010.opt pa/pa64-hpux.opt"
need_64bit_hwint=yes
- tmake_file="pa/t-pa64 pa/t-pa-hpux"
+ tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
case x${enable_threads} in
xyes | xposix )
;;
esac
;;
-hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
- target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
- case x${enable_threads} in
- xyes | xposix )
- thread_file=posix
+hppa[12]*-*-hpux11*)
+ case ${target} in
+ hppa1.1-*-* | hppa2*-*-*)
+ target_cpu_default="MASK_PA_11"
+ ;;
+ esac
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
+ pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
+ extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
+ case ${target} in
+ *-*-hpux11.[1-9]*)
+ tm_file="${tm_file} pa/pa-hpux1111.h"
+ extra_options="${extra_options} pa/pa-hpux1111.opt"
;;
esac
- use_collect2=yes
- ;;
-hppa1.0-*-hpux11*)
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
case x${enable_threads} in
xyes | xposix )
x86_64-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
;;
-i[34567]86-*-openbsd*)
+i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
# needed to unconfuse gdb
tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
+i[34567]86-*-openbsd*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
+ tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
+ gas=yes
+ gnu_ld=yes
+ ;;
i[34567]86-*-coff*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
use_fixproto=yes
esac
tmake_file="${tmake_file} i386/t-crtstuff"
;;
-x86_64-*-linux*)
+x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
i386/x86-64.h i386/linux64.h"
+ case ${target} in
+ x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
+ x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
+ esac
tmake_file="${tmake_file} i386/t-linux64"
;;
i[34567]86-*-gnu*)
xm_file=i386/xm-djgpp.h
tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
tmake_file=i386/t-djgpp
+ extra_options="${extra_options} i386/djgpp.opt"
gnu_ld=yes
gas=yes
;;
i[34567]86-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h svr3.h lynx.h i386/lynx.h"
- else
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h"
- fi
- use_fixproto=yes
+ xm_defines=POSIX
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
+ tmake_file="i386/t-crtstuff t-lynx"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ extra_options="${extra_options} lynx.opt"
+ thread_file=lynx
+ gnu_ld=yes
+ gas=yes
+ ;;
+i[3456x]86-*-netware*)
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
+ tmake_file=i386/t-netware
+ extra_objs=netware.o
+ case /${with_ld} in
+ */nwld)
+ extra_objs="$extra_objs nwld.o"
+ tm_file="${tm_file} i386/nwld.h"
+ tmake_file="${tmake_file} i386/t-nwld"
+ extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
+ ;;
+ esac
+ case x${enable_threads} in
+ x | xyes | xposix) thread_file='posix';;
+ xnks) thread_file='nks';;
+ xno) ;;
+ *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
+ esac
;;
i[34567]86-*-nto-qnx*)
tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
fi
tmake_file=i386/t-sco5
extra_parts="crtbegin.o crtend.o"
+ extra_options="${extra_options} i386/sco5.opt"
use_fixproto=yes
;;
i[34567]86-*-solaris2*)
xm_defines="SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h"
- tmake_file="i386/t-sol2 t-svr4"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
+ case ${target} in
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
+ tm_file="${tm_file} sol26.h"
+ esac
+ tm_file="${tm_file} i386/sol2.h"
+ tmake_file="t-sol2 i386/t-sol2 t-svr4"
+ c_target_objs="sol2-c.o"
+ cxx_target_objs="sol2-c.o"
+ extra_objs="sol2.o"
+ tm_p_file="${tm_p_file} sol2-protos.h"
if test x$gnu_ld = xyes; then
tmake_file="$tmake_file t-slibgcc-elf-ver"
+ tm_defines="${tm_defines} TARGET_GNU_LD=1"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
case ${target} in
- *-*-solaris2.[789] | *-*-solaris2.1[0-9])
+ *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
tm_file="$tm_file tm-dwarf2.h"
;;
esac
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
+ case ${target} in
+ *-*-solaris2.1[0-9]*)
+ tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
+ tm_defines="${tm_defines} TARGET_BI_ARCH=1"
+ tmake_file="$tmake_file i386/t-sol2-10"
+ need_64bit_hwint=yes
+ # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
+ # part of the base system.
+ extra_parts="gmon.o crtbegin.o crtend.o"
+ ;;
+ *)
+ extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
+ ;;
+ esac
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
- no:*:*) ;;
- *:yes:* ) thread_file=posix ;;
- yes:*:* | *:*:yes ) thread_file=solaris ;;
+ "":yes:* | yes:yes:* )
+ case ${target} in
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
+ thread_file=posix95
+ ;;
+ *)
+ thread_file=posix
+ ;;
+ esac
+ ;;
+ "":*:yes | yes:*:yes )
+ thread_file=solaris
+ ;;
esac
;;
i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
xm_file=i386/xm-cygwin.h
tmake_file="i386/t-cygwin i386/t-cygming"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
+ extra_options="${extra_options} i386/cygming.opt"
extra_objs=winnt.o
c_target_objs=cygwin2.o
cxx_target_objs=cygwin2.o
xm_file=i386/xm-mingw32.h
tmake_file="i386/t-cygming i386/t-mingw32"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
+ extra_options="${extra_options} i386/cygming.opt"
extra_objs=winnt.o
case ${enable_threads} in
"" | yes | win32) thread_file='win32' ;;
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
tmake_file="i386/t-cygwin i386/t-uwin"
extra_objs=winnt.o
+ extra_options="${extra_options} i386/cygming.opt"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
if test x$enable_threads = xyes; then
thread_file='win32'
;;
ia64*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
- tmake_file="${tmake_file} ia64/t-ia64 ia64/t-glibc"
+ tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
+ if test x$with_system_libunwind != xyes ; then
+ tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
+ fi
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
- if test x"$use_libunwind_exceptions" = xyes; then
- tmake_file="$tmake_file t-libunwind"
- fi
;;
ia64*-*-hpux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
use_collect2=no
c_target_objs="ia64-c.o"
cxx_target_objs="ia64-c.o"
+ extra_options="${extra_options} ia64/ilp32.opt"
# If we decide to run fixproto we should define FIXPROTO_DEFINES
# in ia64/t-hpux, and also fix the definition of putenv in
# sys-protos.h (const char not char).
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
# We override the tmake_file for linux -- why?
- tmake_file="m32r/t-linux"
+ tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
use_fixproto=yes
if test x$enable_threads = xyes; then
tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
# We override the tmake_file for linux -- why?
- tmake_file="m32r/t-linux"
+ tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
use_fixproto=yes
if test x$enable_threads = xyes; then
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
tmake_file="m68hc11/t-m68hc11-gas"
+ extra_options="${extra_options} m68hc11/m68hc11.opt"
use_fixproto=yes
;;
m68k-*-aout*)
# with ELF format using glibc 2
# aka the GNU/Linux C library 6.
tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
+ extra_options="${extra_options} m68k/ieee.opt"
tm_defines="MOTOROLA USE_GAS"
# if not configured with --enable-sjlj-exceptions, bump the
# libgcc version number
tmake_file=mcore/t-mcore-pe
use_fixproto=yes
;;
-mips-sgi-irix6*) # SGI System V.4., IRIX 6
- tm_file="${tm_file} mips/iris5.h mips/iris6.h"
- tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
- if test x$gas = xyes
- then
- tm_file="${tm_file} mips/iris6gas.h"
- fi
- if test "x$gnu_ld" = xyes
- then
- tm_file="${tm_file} mips/iris6gld.h"
- tmake_file="$tmake_file mips/t-irix-gld"
- fi
- target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
- tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
- # See comment in mips/iris5.h file. Only enabled for O32 ABI
- # without GNU as.
- if test x$gas = xno
- then
- use_collect2=yes
- fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- use_fixproto=yes
- ;;
-mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
- tm_file="${tm_file} mips/iris5.h mips/iris6.h mips/cross64.h"
- tmake_file="mips/t-iris mips/t-cross64"
- target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
- tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
- # See comment in mips/iris[56].h files.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- use_fixproto=yes
- ;;
-mips-sgi-irix5*) # SGI System V.4., IRIX 5
- tm_file="${tm_file} mips/iris5.h"
- if test x$gas = xyes
+mips-sgi-irix[56]*)
+ tm_file="elfos.h ${tm_file} mips/iris.h"
+ tmake_file="mips/t-iris mips/t-slibgcc-irix"
+ target_cpu_default="MASK_ABICALLS"
+ case ${target} in
+ *-*-irix5*)
+ tm_file="${tm_file} mips/iris5.h"
+ ;;
+
+ *-*-irix6*)
+ tm_file="${tm_file} mips/iris6.h"
+ tmake_file="${tmake_file} mips/t-iris6"
+ tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ esac
+ if test "x$stabs" = xyes
then
- tm_file="${tm_file} mips/sdb.h mips/iris5gas.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
- fi
- tmake_file=mips/t-iris5-gas
- else
- tmake_file=mips/t-iris5-as
+ tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
fi
if test "x$gnu_ld" = xyes
then
- tm_file="${tm_file} mips/iris5gld.h"
- tmake_file="$tmake_file mips/t-irix-gld"
- fi
- tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
- target_cpu_default="MASK_ABICALLS"
- # mips-tfile doesn't work yet
- # See comment in mips/iris5.h file.
- if test x$gas = xno
- then
- use_collect2=yes
+ tm_defines="${tm_defines} IRIX_USING_GNU_LD"
fi
# if test x$enable_threads = xyes; then
# thread_file='irix'
use_fixproto=yes
;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ target_cpu_default="MASK_ABICALLS"
tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
;;
mips64*-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
tmake_file="${tmake_file} mips/t-linux64"
-
- # This default ABI is a partial lie: t-linux64 overrides the
- # DRIVER_SELF_SPEC that sets the default abi, in the spec file
- # that is installed. What GCC thinks of as the default must
- # remain as ABI_32 such that the SONAMEs of the libgcc shared
- # libraries remain compatible with those of mips-linux-gnu.
- tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32"
- target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ tm_defines="MIPS_ABI_DEFAULT=ABI_N32"
gnu_ld=yes
gas=yes
;;
;;
mips*-*-openbsd*)
tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
+ target_cpu_default="MASK_ABICALLS"
tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
case ${target} in
mips*el-*-openbsd*)
esac
;;
mipsisa32-*-elf* | mipsisa32el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
use_fixproto=yes
;;
mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
use_fixproto=yes
;;
mipsisa64-*-elf* | mipsisa64el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
use_fixproto=yes
;;
mipsisa64sr71k-*-elf*)
- tm_file="${tm_file} mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-sr71k
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
use_fixproto=yes
;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
- tm_file="${tm_file} mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
;;
mips-*-elf* | mipsel-*-elf*)
- tm_file="${tm_file} mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-elf
use_fixproto=yes
;;
mips64-*-elf* | mips64el-*-elf*)
- tm_file="${tm_file} mips/elf64.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
;;
mips64vr-*-elf* | mips64vrel-*-elf*)
- tm_file="mips/vr.h ${tm_file} mips/elf64.h"
+ tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
tmake_file=mips/t-vr
use_fixproto=yes
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
- tm_file="${tm_file} mips/elforion.h mips/elf64.h"
+ tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
tmake_file=mips/t-elf
- target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
+ target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
;;
mips*-*-rtems*)
- tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
+ tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
tmake_file="mips/t-elf t-rtems mips/t-rtems"
;;
mips-wrs-vxworks)
# have to redo the tm_file list from scratch.
tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
tmake_file="${tmake_file} mips/t-vxworks"
- target_cpu_default="MASK_GAS"
;;
mips-wrs-windiss) # Instruction-level simulator for VxWorks.
xm_defines=POSIX
tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
tmake_file="${tmake_file} mips/t-elf"
- target_cpu_default="MASK_GAS"
thread_file=
;;
mipstx39-*-elf* | mipstx39el-*-elf*)
- tm_file="${tm_file} mips/r3900.h mips/elf.h"
+ tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
tmake_file=mips/t-r3900
use_fixproto=yes
;;
pdp11-*-*)
use_fixproto=yes
;;
-avr-*-*)
- use_fixproto=yes
- ;;
# port not yet contributed
#powerpc-*-openbsd*)
# tmake_file="${tmake_file} rs6000/t-fprules "
# extra_headers=
# ;;
powerpc64-*-linux*)
- tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- case x$with_cpu in
- x|xpowerpc64|xdefault64) tm_file="${tm_file} rs6000/default64.h";;
- esac
- tm_file="${tm_file} rs6000/linux64.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ test x$with_cpu != x || cpu_is_64bit=yes
+ test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
;;
powerpc64-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
;;
powerpc-*-beos*)
powerpc-*-darwin*)
tm_file="${tm_file} rs6000/darwin.h"
tmake_file="${tmake_file} rs6000/t-darwin"
+ extra_options="${extra_options} rs6000/darwin.opt"
+ case ${target} in
+ *-darwin1[0-9]*) tmake_file="${tmake_file} rs6000/t-darwin8" ;;
+ *-darwin[0-7]*) ;;
+ *-darwin[8-9]*) tmake_file="${tmake_file} rs6000/t-darwin8" ;;
+ esac
extra_headers=altivec.h
;;
powerpc*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
tmake_file="${tmake_file} rs6000/t-netbsd"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-chorusos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
case ${enable_threads} in
yes | posix)
thread_file='posix'
;;
powerpc-*-eabispe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-spe rs6000/t-ppccomm"
;;
powerpc-*-eabisimaltivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabisim*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
use_fixproto=yes
;;
powerpc-*-eabialtivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabi*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
;;
powerpc-*-linux*altivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*spe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ case ${enable_targets}:${cpu_is_64bit} in
+ *powerpc64* | all:* | *:yes)
+ if test x$cpu_is_64bit = xyes; then
+ tm_file="${tm_file} rs6000/default64.h"
+ fi
+ tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
+ tmake_file="$tmake_file rs6000/t-linux64"
+ extra_options="${extra_options} rs6000/linux64.opt"
+ ;;
+ *)
+ tm_file="${tm_file} rs6000/linux.h"
+ ;;
+ esac
;;
powerpc-*-gnu-gnualtivec*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
thread_file='posix'
powerpc-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
+ extra_options="${extra_options} rs6000/sysv4.opt"
extra_headers=ppc-asm.h
;;
powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
thread_file=""
use_fixproto=yes
;;
+powerpc-*-lynxos*)
+ xm_defines=POSIX
+ tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
+ tmake_file="t-lynx rs6000/t-lynx"
+ extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ extra_options="${extra_options} lynx.opt"
+ thread_file=lynx
+ gnu_ld=yes
+ gas=yes
+ ;;
powerpcle-*-sysv*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
use_fixproto=yes
;;
powerpcle-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
use_fixproto=yes
;;
powerpcle-*-eabisim*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpcle-*-eabi*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-kaos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpcle-*-kaos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
tmake_file="rs6000/t-fprules rs6000/t-newas"
+ extra_options="${extra_options} rs6000/aix41.opt"
use_collect2=yes
extra_headers=
use_fixproto=yes
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix43
+ extra_options="${extra_options} rs6000/aix64.opt"
use_collect2=yes
thread_file='aix'
extra_headers=
;;
rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
+ extra_options="${extra_options} rs6000/aix64.opt"
tmake_file=rs6000/t-aix43
use_collect2=yes
thread_file='aix'
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix52
+ extra_options="${extra_options} rs6000/aix64.opt"
use_collect2=yes
thread_file='aix'
extra_headers=
;;
-rs6000-*-lynxos*)
- tm_file="svr3.h lynx.h rs6000/lynxbase.h rs6000/rs6000.h rs6000/lynx.h"
- tmake_file=rs6000/t-fprules
- use_collect2=yes
- use_fixproto=yes
- ;;
s390-*-linux*)
tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
tmake_file="${tmake_file} s390/t-crtstuff"
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
out_file=s390/s390.c
tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
+ thread_file='tpf'
;;
sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
+sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
sh-*-linux* | sh[346lbe]*-*-linux* | \
sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
sh64-*-netbsd* | sh64l*-*-netbsd*)
tm_file="${tm_file} sh/elf.h"
case ${target} in
sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
- tm_file="${tm_file} sh/linux.h" ;;
+ tm_file="${tm_file} linux.h sh/linux.h" ;;
sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
;;
sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
tm_file="${tm_file} sh/sh64.h"
extra_headers="shmedia.h ushmedia.h sshmedia.h"
;;
+ *-*-symbianelf*)
+ tmake_file="sh/t-symbian"
+ tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
+ extra_objs="symbian.o"
+ extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ ;;
esac
# sed el/eb endian suffixes away to avoid confusion with sh[23]e
case `echo ${target} | sed 's/e[lb]-/-/'` in
sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
+ sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
+ sh4a_single*) sh_cpu_target=sh4a-single ;;
+ sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
+ sh4al) sh_cpu_target=sh4al ;;
+ sh4a*) sh_cpu_target=sh4a ;;
sh4_single_only*) sh_cpu_target=sh4-single-only ;;
sh4_single*) sh_cpu_target=sh4-single ;;
sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
sh3e*) sh_cpu_target=sh3e ;;
sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
+ sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
+ sh2a_single*) sh_cpu_target=sh2a-single ;;
+ sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
+ sh2a*) sh_cpu_target=sh2a ;;
sh2e*) sh_cpu_target=sh2e ;;
sh2*) sh_cpu_target=sh2 ;;
*) sh_cpu_target=sh1 ;;
case $sh_cpu_default in
sh5-64media-nofpu | sh5-64media | \
sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
+ sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
+ sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
sh3e | sh3 | sh2e | sh2 | sh1) ;;
"") sh_cpu_default=${sh_cpu_target} ;;
sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
- *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only ;;
+ *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
esac
fi
target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr a-z- A-Z_`
case ${sh_multilib} in
sh1 | sh2 | sh2e | sh3 | sh3e | \
sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
+ sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
+ sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
sh5-64media | sh5-64media-nofpu | \
sh5-32media | sh5-32media-nofpu | \
sh5-compact | sh5-compact-nofpu)
tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
- tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`"
+ tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`=1"
;;
*)
echo "with_multilib_list=${sh_multilib} not supported."
esac
done
if test x${enable_incomplete_targets} == xyes ; then
- tm_defines="$tm_defines SUPPORT_SH1 SUPPORT_SH2E SUPPORT_SH4 SUPPORT_SH4_SINGLE SUPPORT_SH5_32MEDIA SUPPORT_SH5_32MEDIA_NOFPU SUPPORT_SH5_64MEDIA SUPPORT_SH5_64MEDIA_NOFPU"
+ tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
fi
use_fixproto=yes
;;
sh-*-rtemscoff*)
- tmake_file="sh/t-sh t-rtems"
+ tmake_file="sh/t-sh t-rtems sh/t-rtems"
tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
;;
sh-*-rtems*)
- tmake_file="sh/t-sh sh/t-elf t-rtems"
+ tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
;;
sh-wrs-vxworks)
use_fixproto=yes
;;
sparc-*-netbsdelf*)
- tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
;;
sparc-*-openbsd*)
tm_defines=OBSD_OLD_GAS
use_collect2=yes
;;
sparc64-*-openbsd*)
- tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
+ tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
+ extra_options="${extra_options} sparc/little-endian.opt"
gas=yes gnu_ld=yes
with_cpu=ultrasparc
;;
sparc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
tmake_file="sparc/t-elf sparc/t-crtfm"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
use_fixproto=yes
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-crtfm"
;;
sparc-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
fi
if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas-bi.h"
+ tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
fi
- tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
+ tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
if test x$gnu_ld = xyes; then
tmake_file="$tmake_file t-slibgcc-elf-ver"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
+ c_target_objs="sol2-c.o"
+ cxx_target_objs="sol2-c.o"
+ extra_objs="sol2.o"
+ tm_p_file="${tm_p_file} sol2-protos.h"
extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
- no:*:*) ;;
- *:yes:* ) thread_file=posix ;;
- yes:*:* | *:*:yes ) thread_file=solaris ;;
+ "":yes:* | yes:yes:* ) thread_file=posix ;;
+ "":*:yes | yes:*:yes ) thread_file=solaris ;;
esac
need_64bit_hwint=yes
;;
sparc-*-solaris2*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
+ case ${target} in
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
+ tm_file="${tm_file} sol26.h"
+ esac
+ tm_file="${tm_file} sparc/sol2.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld.h"
fi
- tmake_file="sparc/t-sol2 sparc/t-crtfm"
+ if test x$gas = xyes; then
+ tm_file="${tm_file} sparc/sol2-gas.h"
+ fi
+ tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
if test x$gnu_ld = xyes; then
tmake_file="$tmake_file t-slibgcc-elf-ver"
else
tm_file="${tm_file} sparc/sol26-sld.h"
fi
;;
- *-*-solaris2.[789] | *-*-solaris2.1[0-9])
+ *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h tm-dwarf2.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld-bi.h"
need_64bit_hwint=yes
;;
esac
+ c_target_objs="sol2-c.o"
+ cxx_target_objs="sol2-c.o"
+ extra_objs="sol2.o"
+ tm_p_file="${tm_p_file} sol2-protos.h"
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
- no:*:*) ;;
- *:yes:* ) thread_file=posix ;;
- yes:*:* | *:*:yes ) thread_file=solaris ;;
+ "":yes:* | yes:yes:* )
+ case ${target} in
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
+ thread_file=posix95
+ ;;
+ *)
+ thread_file=posix
+ ;;
+ esac
+ ;;
+ "":*:yes | yes:*:yes )
+ thread_file=solaris
+ ;;
esac
;;
sparc-*-sysv4*)
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
-sparclite-*-coff*)
- tm_file="${tm_file} sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
- tmake_file=sparc/t-sparclite
- ;;
-sparclite-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/liteelf.h"
- tmake_file="sparc/t-sparclite sparc/t-crtfm"
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
-sparc86x-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/sp86x-elf.h"
- tmake_file="sparc/t-sp86x sparc/t-crtfm"
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
sparc64-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
+ extra_options="${extra_options} sparc/little-endian.opt"
tmake_file="${tmake_file} sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-crtfm"
case "x$with_cpu" in
xultrasparc) ;;
need_64bit_hwint=yes
;;
sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
;;
sparc64-*-netbsd*)
- tmake_file="${tmake_file} sparc/t-netbsd64"
tm_file="sparc/biarch64.h ${tm_file}"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ extra_options="${extra_options} sparc/long-double-switch.opt"
+ tmake_file="${tmake_file} sparc/t-netbsd64"
;;
strongarm-*-elf*)
tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-strongarm-elf
+ tmake_file="arm/t-arm arm/t-strongarm-elf"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
;;
strongarm-*-pe)
tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
- tmake_file=arm/t-strongarm-pe
+ tmake_file="arm/t-arm arm/t-strongarm-pe"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
+ extra_options="${extra_options} arm/pe.opt"
extra_objs=pe.o
use_fixproto=yes
;;
strongarm-*-kaos*)
tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
- tmake_file=arm/t-strongarm-elf
+ tmake_file="arm/t-arm arm/t-strongarm-elf"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
tmake_file=v850/t-v850e
md_file=v850/v850.md
out_file=v850/v850.c
+ extra_options="${extra_options} v850/v850.opt"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
tmake_file=v850/t-v850e
md_file=v850/v850.md
out_file=v850/v850.c
+ extra_options="${extra_options} v850/v850.opt"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
;;
xscale-*-elf)
tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file=arm/t-xscale-elf
+ tmake_file="arm/t-arm arm/t-xscale-elf"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
;;
xscale-*-coff)
tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
- tmake_file=arm/t-xscale-coff
+ tmake_file="arm/t-arm arm/t-xscale-coff"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
tm_p_file=stormy16/stormy16-protos.h
md_file=stormy16/stormy16.md
out_file=stormy16/stormy16.c
+ extra_options=stormy16/stormy16.opt
tmake_file="stormy16/t-stormy16"
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
esac
+case ${target} in
+i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
+ tmake_file="${tmake_file} i386/t-gmm_malloc"
+ ;;
+i[34567]86-*-linux* | x86_64-*-linux*)
+ tmake_file="${tmake_file} i386/t-pmm_malloc"
+ ;;
+i[34567]86-*-* | x86_64-*-*)
+ tmake_file="${tmake_file} i386/t-gmm_malloc"
+ ;;
+esac
+
# Support for --with-cpu and related options (and a few unrelated options,
# too).
case ${with_cpu} in
esac
fi
- # Similarly for --with-schedule.
- if test x$with_schedule = x; then
- case ${target} in
- hppa1* | parisc1*)
- # Override default PA8000 scheduling model.
- with_schedule=7100LC
- ;;
- esac
- fi
+# Similarly for --with-schedule.
+if test x$with_schedule = x; then
+ case ${target} in
+ hppa1* | parisc1*)
+ # Override default PA8000 scheduling model.
+ with_schedule=7100LC
+ ;;
+ esac
+fi
- # Validate and mark as valid any --with options supported
- # by this target. In order to use a particular --with option
- # you must list it in supported_defaults; validating the value
- # is optional. This case statement should set nothing besides
- # supported_defaults.
+# Validate and mark as valid any --with options supported
+# by this target. In order to use a particular --with option
+# you must list it in supported_defaults; validating the value
+# is optional. This case statement should set nothing besides
+# supported_defaults.
- supported_defaults=
- case "${target}" in
+supported_defaults=
+case "${target}" in
alpha*-*-*)
supported_defaults="cpu tune"
for which in cpu tune; do
# See if it matches any of the entries in arm-cores.def
eval "val=\$with_$which"
if [ x"$val" = x ] \
- || grep "^ARM_CORE($val," \
+ || grep "^ARM_CORE(\"$val\"," \
${srcdir}/config/arm/arm-cores.def \
> /dev/null; then
# Ok
+ new_val=`grep "^ARM_CORE(\"$val\"," \
+ ${srcdir}/config/arm/arm-cores.def | \
+ sed -e 's/^[^,]*,[ ]*//' | \
+ sed -e 's/,.*$//'`
+ eval "target_${which}_cname=$new_val"
+ echo "For $val real value is $new_val"
true
else
echo "Unknown CPU used in --with-$which=$val" 1>&2
case "$with_arch" in
"" \
| armv[23456] | armv2a | armv3m | armv4t | armv5t \
- | armv5te | armv6j | iwmmxt | ep9312)
+ | armv5te | armv6j |armv6k | armv6z | armv6zk \
+ | iwmmxt | ep9312)
# OK
;;
*)
;;
mips*-*-*)
- supported_defaults="abi arch float tune"
+ supported_defaults="abi arch float tune divide"
case ${with_float} in
"" | soft | hard)
exit 1
;;
esac
+
+ case ${with_divide} in
+ "" | breaks | traps)
+ # OK
+ ;;
+ *)
+ echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
+ exit 1
+ esac
;;
powerpc*-*-* | rs6000-*-*)
eval $with_which=
;;
"" | common \
- | power | power2 | power3 | power4 \
- | powerpc | powerpc64 \
+ | power | power[2345] | powerpc | powerpc64 \
| rios | rios1 | rios2 | rsc | rsc1 | rs64a \
| 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
| 601 | 602 | 603 | 603e | ec603e | 604 \
| 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
- | 8540 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
+ | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
# OK
;;
*)
"" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
# OK
;;
+ m2a | m2a-single | m2a-single-only | m2a-nofpu)
+ ;;
+ m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
+ ;;
*)
echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
+ echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
+ echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
exit 1
;;
esac
;;
esac
;;
- esac
+esac
- # Set some miscellaneous flags for particular targets.
- target_cpu_default2=
- case ${target} in
+# Set some miscellaneous flags for particular targets.
+target_cpu_default2=
+case ${target} in
alpha*-*-*)
if test x$gas = xyes
then
;;
arm*-*-*)
- case "x$with_cpu" in
- x)
- # The most generic
- target_cpu_default2="TARGET_CPU_generic"
- ;;
-
- *)
- target_cpu_default2="TARGET_CPU_$with_cpu"
- ;;
- esac
+ if test x$target_cpu_cname = x
+ then
+ target_cpu_default2=TARGET_CPU_generic
+ else
+ target_cpu_default2=TARGET_CPU_$target_cpu_cname
+ fi
;;
m68k*-linux*)
;;
hppa*-*-* | parisc*-*-*)
+ target_cpu_default2="MASK_BIG_SWITCH"
if test x$gas = xyes
then
- target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
+ target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
fi
;;
mips*-*-*)
- case ${target} in
- mips*-*-ecoff* | mips*-*-elf*)
- if test x$gas = xyes
- then
- if test x$gnu_ld = xyes
- then
- target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
- else
- target_cpu_default2="MASK_GAS"
- fi
- fi
- ;;
- mips*-*-*)
- if test x$gas = xyes
- then
- target_cpu_default2="MASK_GAS"
- fi
- ;;
- esac
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default2="MASK_SPLIT_ADDRESSES"
+ fi
case ${target} in
mips*el-*-*)
tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
;;
esac
- case $tm_file in
- *mips/elf.h* | *mips/elf64.h*)
- tm_defines="OBJECT_FORMAT_ELF $tm_defines"
- ;;
- esac
if test "x$enable_gofast" = xyes
then
tm_defines="US_SOFTWARE_GOFAST $tm_defines"
c_target_objs="${c_target_objs} rs6000-c.o"
cxx_target_objs="${cxx_target_objs} rs6000-c.o"
tmake_file="rs6000/t-rs6000 ${tmake_file}"
+
+ if test x$enable_e500_double = xyes
+ then
+ tm_file="$tm_file rs6000/e500-double.h"
+ fi
;;
sparc*-*-*)
xsparc)
with_cpu=v7
;;
- xsparc86x)
- with_cpu=sparclite86x
- ;;
xsparcv9 | xsparc64)
with_cpu=v9
;;
;;
esac
;;
- esac
+esac
- t=
- all_defaults="abi cpu arch tune schedule float mode fpu"
- for option in $all_defaults
- do
- eval "val=\$with_$option"
- if test -n "$val"; then
- case " $supported_defaults " in
- *" $option "*)
- ;;
- *)
- echo "This target does not support --with-$option." 2>&1
- exit 1
- ;;
- esac
+t=
+all_defaults="abi cpu arch tune schedule float mode fpu divide"
+for option in $all_defaults
+do
+ eval "val=\$with_$option"
+ if test -n "$val"; then
+ case " $supported_defaults " in
+ *" $option "*)
+ ;;
+ *)
+ echo "This target does not support --with-$option." 2>&1
+ exit 1
+ ;;
+ esac
- if test "x$t" = x
- then
- t="{ \"$option\", \"$val\" }"
- else
- t="${t}, { \"$option\", \"$val\" }"
- fi
+ if test "x$t" = x
+ then
+ t="{ \"$option\", \"$val\" }"
+ else
+ t="${t}, { \"$option\", \"$val\" }"
fi
- done
- if test "x$t" = x
- then
- configure_default_options="{ { NULL, NULL} }"
- else
- configure_default_options="{ ${t} }"
fi
+done
- if test "$target_cpu_default2" != ""
+if test "x$t" = x
+then
+ configure_default_options="{ { NULL, NULL} }"
+else
+ configure_default_options="{ ${t} }"
+fi
+
+if test "$target_cpu_default2" != ""
+then
+ if test "$target_cpu_default" != ""
then
- if test "$target_cpu_default" != ""
- then
- target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
- else
- target_cpu_default=$target_cpu_default2
- fi
+ target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
+ else
+ target_cpu_default=$target_cpu_default2
fi
+fi