#GCC is free software; you can redistribute it and/or modify it under
#the terms of the GNU General Public License as published by the Free
-#Software Foundation; either version 2, or (at your option) any later
+#Software Foundation; either version 3, or (at your option) any later
#version.
#GCC is distributed in the hope that it will be useful, but WITHOUT
#for more details.
#You should have received a copy of the GNU General Public License
-#along with GCC; see the file COPYING. If not, write to the Free
-#Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-#02110-1301, USA.
+#along with GCC; see the file COPYING3. If not see
+#<http://www.gnu.org/licenses/>.
# This is the GCC target-specific configuration file
# where a configuration type is mapped to different system-specific
# extra_headers List of used header files from the directory
# config/${cpu_type}.
#
+# use_gcc_tgmath If set, add tgmath.h to the list of used header
+# files.
+#
# extra_passes List of extra executables compiled for this target
# machine, used for compiling from source to object.
#
out_file=
tmake_file=
extra_headers=
+use_gcc_tgmath=yes
extra_passes=
extra_parts=
extra_programs=
;;
arm*-*-*)
cpu_type=arm
- extra_headers="mmintrin.h"
+ extra_headers="mmintrin.h arm_neon.h"
;;
bfin*-*)
cpu_type=bfin
;;
frv*) cpu_type=frv
;;
+fido-*-*)
+ cpu_type=m68k
+ extra_headers=math-68881.h
+ ;;
xscale-*-*)
cpu_type=arm
extra_headers="mmintrin.h"
i[34567]86-*-*)
cpu_type=i386
extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
- pmmintrin.h tmmintrin.h"
+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+ nmmintrin.h"
;;
x86_64-*-*)
cpu_type=i386
extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
- pmmintrin.h tmmintrin.h"
+ pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
+ nmmintrin.h"
need_64bit_hwint=yes
;;
ia64-*-*)
c_target_objs="darwin-c.o"
cxx_target_objs="darwin-c.o"
extra_objs="darwin.o"
+ extra_gcc_objs="darwin-driver.o"
default_use_cxa_atexit=yes
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
# Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
default_use_cxa_atexit=yes
+ use_gcc_tgmath=no
;;
*-*-gnu*)
# On the Hurd, the setup is just about the same on
esac
# Assume that glibc is being used and so __cxa_atexit is provided.
default_use_cxa_atexit=yes
+ use_gcc_tgmath=no
;;
*-*-netbsd*)
tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
;;
*-*-vxworks*)
tmake_file=t-vxworks
- tm_file="${tm_file} elfos.h svr4.h"
xm_defines=POSIX
extra_options="${extra_options} vxworks.opt"
+ extra_objs=vxworks.o
case ${enable_threads} in
no) ;;
"" | yes | vxworks) thread_file='vxworks' ;;
tmake_file="arm/t-arm arm/t-semi"
;;
arm-wrs-vxworks)
- tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
+ tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
;;
arm*-*-freebsd*|strongarm*-*-freebsd*)
tm_file="$tm_file arm/aout.h arm/arm.h"
;;
arm*-*-uclinux*) # ARM ucLinux
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h arm/uclinux-elf.h"
tmake_file="arm/t-arm arm/t-arm-elf"
+ case ${target} in
+ arm*-*-uclinux-*eabi)
+ tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
+ tmake_file="$tmake_file arm/t-bpabi"
+ # The BPABI long long divmod functions return a 128-bit value in
+ # registers r0-r3. Correctly modeling that requires the use of
+ # TImode.
+ need_64bit_hwint=yes
+ # The EABI requires the use of __cxa_atexit.
+ default_use_cxa_atexit=yes
+ esac
+ tm_file="$tm_file arm/aout.h arm/arm.h"
;;
arm*-*-ecos-elf)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
;;
bfin*-uclinux*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
- tmake_file=bfin/t-bfin-elf
+ tmake_file=bfin/t-bfin-uclinux
+ use_collect2=no
+ ;;
+bfin*-linux-uclibc*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h"
+ tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
use_collect2=no
;;
bfin*-rtems*)
# config.guess deciding that the configuration is i386-*-darwin* and
# then this file using that to set --with-cpu=i386 which has no -m64
# support.
- with_arch=${with_arch:-nocona}
with_cpu=${with_cpu:-generic}
+ tmake_file="${tmake_file} i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
;;
x86_64-*-darwin*)
- with_arch=${with_arch:-nocona}
with_cpu=${with_cpu:-generic}
- tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin"
+ tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
tm_file="${tm_file} ${cpu_type}/darwin64.h"
;;
i[34567]86-*-elf*)
if test x$enable_targets = xall; then
tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
- tmake_file="${tmake_file} i386/t-linux64"
+ tmake_file="${tmake_file} i386/t-linux64 i386/t-fprules-softfp64 soft-fp/t-softfp"
need_64bit_hwint=yes
# FIXME: -m64 for i[34567]86-*-* should be allowed just
# like -m32 for x86_64-*-*.
case X"${with_cpu}" in
- Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
+ Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
;;
X)
with_cpu=generic
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
+ echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
exit 1
;;
esac
i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
esac
- tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
+ tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
esac
- tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
+ tmake_file="${tmake_file} i386/t-linux64 i386/t-crtpc i386/t-crtfm i386/t-fprules-softfp64 soft-fp/t-softfp t-dfprules"
;;
i[34567]86-*-gnu*)
;;
# FIXME: -m64 for i[34567]86-*-* should be allowed just
# like -m32 for x86_64-*-*.
case X"${with_cpu}" in
- Xgeneric|Xnocona|Xx86-64|Xk8|Xopteron|Xathlon64|Xathlon-fx)
+ Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
;;
X)
with_cpu=generic
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic nocona x86-64 k8 opteron athlon64 athlon-fx" 1>&2
+ echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
exit 1
;;
esac
use_fixproto=yes
;;
i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
- tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
case ${target} in
*-vxworksae*)
- tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
+ tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
;;
*)
- tm_file="${tm_file} vxworks.h i386/vxworks.h"
+ tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
tmake_file="${tmake_file} i386/t-vxworks"
;;
esac
thread_file='posix'
fi
;;
-i[34567]86-*-mingw32*)
+i[34567]86-*-mingw32* | x86_64-*-mingw32*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
xm_file=i386/xm-mingw32.h
tmake_file="i386/t-cygming i386/t-mingw32"
tmake_file="ia64/t-ia64 ia64/t-hpux"
target_cpu_default="MASK_GNU_AS"
case x$enable_threads in
- xyes | xposix )
+ x | xyes | xposix )
thread_file=posix
;;
esac
;;
m68k-*-aout*)
default_m68k_cpu=68020
- tmake_file=m68k/t-m68kbare
- tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
+ default_cf_cpu=5206
+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
;;
m68k-*-coff*)
default_m68k_cpu=68020
- tmake_file=m68k/t-m68kbare
- tm_defines="${tm_defines} MOTOROLA USE_GAS"
- tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
+ default_cf_cpu=5206
+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
use_fixproto=yes
;;
-m68020-*-elf* | m68k-*-elf*)
- default_m68k_cpu=68020
- tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
- tm_defines="${tm_defines} MOTOROLA USE_GAS"
- tmake_file=m68k/t-m68kelf
+m68020-*-elf* | m68k-*-elf* | fido-*-elf*)
+ case ${target} in
+ fido-*-elf*)
+ # Check that $with_cpu makes sense.
+ case $with_cpu in
+ "" | "fidoa")
+ ;;
+ *)
+ echo "Cannot accept --with-cpu=$with_cpu"
+ exit 1
+ ;;
+ esac
+ with_cpu=fidoa
+ ;;
+ *)
+ default_m68k_cpu=68020
+ default_cf_cpu=5206
+ ;;
+ esac
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
+ # Add multilibs for targets other than fido.
+ case ${target} in
+ fido-*-elf*)
+ ;;
+ *)
+ tmake_file="$tmake_file m68k/t-mlibs"
+ ;;
+ esac
extra_parts="crtbegin.o crtend.o"
;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
default_m68k_cpu=68020
+ default_cf_cpu=5475
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
- tm_defines="${tm_defines} MOTOROLA USE_GAS"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
;;
m68k*-*-openbsd*)
default_m68k_cpu=68020
+ default_cf_cpu=5475
# needed to unconfuse gdb
tm_defines="${tm_defines} OBSD_OLD_GAS"
- tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
+ tm_file="${tm_file} openbsd.h m68k/openbsd.h"
tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
-m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc
+m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
+ # with uClibc, using the original
+ # m68k-elf-based ABI
+ default_m68k_cpu=68020
+ default_cf_cpu=5206
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
+ tmake_file="m68k/t-floatlib m68k/t-uclinux"
+ use_fixproto=no
+ ;;
+m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
+ # with uClibc, using the new GNU/Linux-style
+ # ABI.
default_m68k_cpu=68020
- tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
- tm_defines="${tm_defines} MOTOROLA USE_GAS"
- tmake_file=m68k/t-uclinux
+ default_cf_cpu=5206
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS UCLIBC_DEFAULT=1"
+ extra_options="${extra_options} linux.opt"
+ tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
use_fixproto=no
;;
m68k-*-linux*) # Motorola m68k's running GNU/Linux
# with ELF format using glibc 2
# aka the GNU/Linux C library 6.
default_m68k_cpu=68020
- tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
+ default_cf_cpu=5475
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
extra_options="${extra_options} m68k/ieee.opt"
- tm_defines="${tm_defines} MOTOROLA USE_GAS"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
# if not configured with --enable-sjlj-exceptions, bump the
# libgcc version number
if test x$sjlj != x1; then
;;
m68k-*-rtems*)
default_m68k_cpu=68020
- tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
- tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
- tm_defines="${tm_defines} MOTOROLA USE_GAS"
+ default_cf_cpu=5206
+ tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
+ tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
extra_parts="crtbegin.o crtend.o"
;;
mcore-*-elf)
then
tm_defines="${tm_defines} IRIX_USING_GNU_LD"
fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
+ case ${enable_threads}:${have_pthread_h} in
+ "":yes | yes:yes ) thread_file=posix ;;
+ esac
use_fixproto=yes
;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
*) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
esac
;;
-mipsisa32-*-elf* | mipsisa32el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
- ;;
-mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
- tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
+mips*-sde-elf*)
+ tm_file="elfos.h ${tm_file} mips/elf.h mips/sde.h"
+ tmake_file="mips/t-sde mips/t-libgcc-mips16"
+ case ${target} in
+ mipsisa32r2*)
+ tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa32*)
+ tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
+ ;;
+ mipsisa64*)
+ tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
+ esac
;;
+mipsisa32-*-elf* | mipsisa32el-*-elf* | \
+mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
mipsisa64-*-elf* | mipsisa64el-*-elf*)
tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-isa3264
- target_cpu_default="MASK_64BIT|MASK_FLOAT64"
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
- use_fixproto=yes
+ tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
+ case ${target} in
+ mipsisa32r2*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
+ ;;
+ mipsisa32*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
+ ;;
+ mipsisa64*)
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
+ ;;
+ esac
+ case ${target} in
+ mipsisa32*-*-elfoabi*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
+ tm_file="${tm_file} mips/elfoabi.h"
+ ;;
+ mipsisa64*-*-elfoabi*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
+ tm_file="${tm_file} mips/elfoabi.h"
+ ;;
+ *-*-elf*)
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
+ ;;
+ esac
;;
mipsisa64sr71k-*-elf*)
tm_file="elfos.h ${tm_file} mips/elf.h"
;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file="mips/t-elf mips/t-sb1"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
;;
mips-*-elf* | mipsel-*-elf*)
tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-elf
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
use_fixproto=yes
;;
mips64-*-elf* | mips64el-*-elf*)
tm_file="elfos.h ${tm_file} mips/elf.h"
- tmake_file=mips/t-elf
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
- tmake_file=mips/t-elf
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
target_cpu_default="MASK_64BIT|MASK_FLOAT64"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
;;
mips*-*-rtems*)
tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
- tmake_file="mips/t-elf t-rtems mips/t-rtems"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
;;
mips-wrs-vxworks)
- # We want vxworks.h after mips/elf.h, which unfortunately means we
- # have to redo the tm_file list from scratch.
- tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
+ tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
tmake_file="${tmake_file} mips/t-vxworks"
;;
mips-wrs-windiss) # Instruction-level simulator for VxWorks.
xm_defines=POSIX
tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
- tmake_file="${tmake_file} mips/t-elf"
+ tmake_file="${tmake_file} mips/t-elf mips/t-libgcc-mips16"
thread_file=
;;
mipstx39-*-elf* | mipstx39el-*-elf*)
tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
- tmake_file=mips/t-r3900
+ tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
use_fixproto=yes
;;
mmix-knuth-mmixware)
fi
;;
powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
- # We want vxworks.h after rs6000/sysv4.h, which unfortunately
- # means we have to redo the tm_file list from scratch.
- tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
extra_options="${extra_options} rs6000/sysv4.opt"
extra_headers=ppc-asm.h
sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
- sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
+ sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
sh3e | sh3 | sh2e | sh2 | sh1) ;;
"") sh_cpu_default=${sh_cpu_target} ;;
*) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
for sh_multilib in ${sh_multilibs}; do
case ${sh_multilib} in
sh1 | sh2 | sh2e | sh3 | sh3e | \
- sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
+ sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\
sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
sh5-64media | sh5-64media-nofpu | \
;;
sh-wrs-vxworks)
tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
+ tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
;;
sh-*-*)
tm_file="${tm_file} dbxcoff.h sh/coff.h"
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
+sparc-wrs-vxworks)
+ tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
+ tmake_file="${tmake_file} sparc/t-vxworks"
+ ;;
sparc64-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
extra_options="${extra_options} sparc/little-endian.opt"
;;
i686-*-* | i786-*-*)
case ${target_noncanonical} in
+ amdfam10-*|barcelona-*)
+ with_cpu=amdfam10
+ ;;
k8-*|opteron-*|athlon_64-*)
with_cpu=k8
;;
athlon_tbird-*|athlon-*)
with_cpu=athlon
;;
+ geode-*)
+ with_cpu=geode
+ ;;
pentium2-*)
with_cpu=pentium2
;;
nocona-*)
with_cpu=nocona
;;
+ core2-*)
+ with_cpu=core2
+ ;;
pentium_m-*)
with_cpu=pentium-m
;;
;;
x86_64-*-*)
case ${target_noncanonical} in
+ amdfam10-*|barcelona-*)
+ with_cpu=amdfam10
+ ;;
k8-*|opteron-*|athlon_64-*)
with_cpu=k8
;;
nocona-*)
with_cpu=nocona
;;
+ core2-*)
+ with_cpu=core2
+ ;;
*)
with_cpu=generic
;;
with_cpu=`echo ${target} | sed 's/-.*$//'`
;;
m68k*-*-*)
- with_cpu=m${default_m68k_cpu}
+ case "$with_arch" in
+ "cf")
+ with_cpu=${default_cf_cpu}
+ ;;
+ "" | "m68k")
+ with_cpu=m${default_m68k_cpu}
+ ;;
+ esac
+ ;;
+ mips*-*-vxworks)
+ with_arch=mips2
;;
sparc*-*-*)
with_cpu="`echo ${target} | sed 's/-.*$//'`"
case "$with_fpu" in
"" \
- | fpa | fpe2 | fpe3 | maverick | vfp )
+ | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | neon )
# OK
;;
*)
esac
;;
- m680[012]0-*-* | m68k*-*-*)
- supported_defaults="cpu"
+ fido-*-* | m680[012]0-*-* | m68k*-*-*)
+ supported_defaults="arch cpu"
+ case "$with_arch" in
+ "" | "m68k"| "cf")
+ m68k_arch_family="$with_arch"
+ ;;
+ *)
+ echo "Invalid --with-arch=$with_arch" 1>&2
+ exit 1
+ ;;
+ esac
# We always have a $with_cpu setting here.
case "$with_cpu" in
- "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
- # OK
+ "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
+ m68k_cpu_ident=$with_cpu
+ ;;
+ "m68020-40")
+ m68k_cpu_ident=m68020
+ tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
+ ;;
+ "m68020-60")
+ m68k_cpu_ident=m68020
+ tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
;;
*)
- echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
- echo "m68000 m68010 m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
- exit 1
+ # We need the C identifier rather than the string.
+ m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
+ 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
+ $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
+ ${srcdir}/config/m68k/m68k-devices.def`
+ if [ x"$m68k_cpu_ident" = x ] ; then
+ echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ fi
+ with_cpu="mcpu=$with_cpu"
;;
esac
;;
| i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
| c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
| pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
- | athlon-4 | athlon-xp | athlon-mp \
+ | athlon-4 | athlon-xp | athlon-mp | geode \
| prescott | pentium-m | pentium4m | pentium3m)
case "${target}" in
x86_64-*-*)
esac
# OK
;;
- "" | k8 | opteron | athlon64 | athlon-fx | nocona | generic)
+ "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
# OK
;;
*)
for which in arch tune; do
eval "val=\$with_$which"
case ${val} in
- "" | g5 | g6 | z900 | z990 | z9-109)
+ "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec)
# OK
;;
*)
esac
;;
+ spu-*-*)
+ supported_defaults="arch tune"
+
+ for which in arch tune; do
+ eval "val=\$with_$which"
+ case ${val} in
+ "" | cell | celledp)
+ # OK
+ ;;
+ *)
+ echo "Unknown cpu used in --with-$which=$val." 1>&2
+ exit 1
+ ;;
+ esac
+ done
+ ;;
+
v850*-*-*)
supported_defaults=cpu
case ${with_cpu} in
fi
;;
+ fido*-*-* | m680[012]0-*-* | m68k*-*-*)
+ target_cpu_default2=$m68k_cpu_ident
+ if [ x"$m68k_arch_family" != x ]; then
+ tmake_file="m68k/t-$m68k_arch_family $tmake_file"
+ fi
+ ;;
+
mips*-*-*)
if test x$gnu_ld = xyes
then