# GCC target-specific configuration file.
-# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-# Free Software Foundation, Inc.
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+# 2008 Free Software Foundation, Inc.
#This file is part of GCC.
# This helps to keep OS specific stuff out of the CPU
# defining header ${cpu_type}/${cpu_type.h}.
#
+# It is possible to include automatically-generated
+# build-directory files by prefixing them with "./".
+# All other files should relative to $srcdir/config.
+#
# tm_p_file Location of file with declarations for functions
# in $out_file.
#
# cxx_target_objs List of extra target-dependent objects that be
# linked into the C++ compiler only.
#
+# fortran_target_objs List of extra target-dependent objects that be
+# linked into the fortran compiler only.
+#
# target_gtfiles List of extra source files with type information.
#
# xm_defines List of macros to define when compiling for the
# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
# for this target. This is true iff this target
# supports "long" or "wchar_t" wider than 32 bits.
+# The setting made here must match the one made in
+# other locations such as libcpp/configure.ac
#
# configure_default_options
# Set to an initializer for configure_default_options
extra_options=
c_target_objs=
cxx_target_objs=
+fortran_target_objs=
tm_defines=
xm_defines=
# Set this to force installation and use of collect2.
md_file=
# Obsolete configurations.
-case ${target} in
- c4x-* \
- | tic4x-* \
- )
- if test "x$enable_obsolete" != xyes; then
- echo "*** Configuration ${target} is obsolete." >&2
- echo "*** Specify --enable-obsolete to build it anyway." >&2
- echo "*** Support will be REMOVED in the next major release of GCC," >&2
- echo "*** unless a maintainer comes forward." >&2
- exit 1
- fi;;
-esac
+#case ${target} in
+# )
+# if test "x$enable_obsolete" != xyes; then
+# echo "*** Configuration ${target} is obsolete." >&2
+# echo "*** Specify --enable-obsolete to build it anyway." >&2
+# echo "*** Support will be REMOVED in the next major release of GCC," >&2
+# echo "*** unless a maintainer comes forward." >&2
+# exit 1
+# fi;;
+#esac
# Unsupported targets list. Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern. The list
# should be in alphabetical order.
case ${target} in
- alpha*-*-linux*libc1* \
- | i[34567]86-sequent-sysv \
- | i[34567]86-sequent-sysv[123]* \
- | i[34567]86-go32-* \
+ i[34567]86-go32-* \
| i[34567]86-*-go32* \
- | m68k-*-linux*aout* \
- | m68k-*-linux*libc1* \
| mips64orion*-*-rtems* \
- | powerpc-*-linux*libc1* \
- | sparc-*-linux*aout* \
- | sparc-*-linux*libc1* \
| sparc-hal-solaris2* \
| thumb-*-* \
+ | *-*-linux*aout* \
| *-*-linux*coff* \
+ | *-*-linux*libc1* \
| *-*-linux*oldld* \
| *-*-rtemsaout* \
| *-*-rtemscoff* \
+ | *-*-solaris2.[0-6] \
+ | *-*-solaris2.[0-6].* \
+ | *-*-sysv* \
| vax-*-vms* \
)
echo "*** Configuration ${target} not supported" 1>&2
am33_2.0-*-linux*)
cpu_type=mn10300
;;
-strongarm*-*-*)
- cpu_type=arm
- ;;
arm*-*-*)
cpu_type=arm
extra_headers="mmintrin.h arm_neon.h"
bfin*-*)
cpu_type=bfin
;;
-ep9312*-*-*)
- cpu_type=arm
+crisv32-*)
+ cpu_type=cris
;;
frv*) cpu_type=frv
;;
cpu_type=m68k
extra_headers=math-68881.h
;;
-xscale-*-*)
- cpu_type=arm
- extra_headers="mmintrin.h"
- ;;
i[34567]86-*-*)
cpu_type=i386
extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
- nmmintrin.h bmmintrin.h mmintrin-common.h"
+ nmmintrin.h bmmintrin.h mmintrin-common.h
+ wmmintrin.h"
;;
x86_64-*-*)
cpu_type=i386
extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
- nmmintrin.h bmmintrin.h mmintrin-common.h"
+ nmmintrin.h bmmintrin.h mmintrin-common.h
+ wmmintrin.h"
need_64bit_hwint=yes
;;
ia64-*-*)
extra_headers=ia64intrin.h
need_64bit_hwint=yes
;;
-hppa*-*-* | parisc*-*-*)
+hppa*-*-*)
cpu_type=pa
;;
m32r*-*-*)
cpu_type=m32r
;;
-m680[012]0-*-*)
- cpu_type=m68k
- extra_headers=math-68881.h
- ;;
m68k-*-*)
extra_headers=math-68881.h
;;
score*-*-*)
cpu_type=score
;;
-sparc64*-*-*)
- cpu_type=sparc
- need_64bit_hwint=yes
- ;;
sparc*-*-*)
cpu_type=sparc
+ need_64bit_hwint=yes
;;
spu*-*-*)
cpu_type=spu
need_64bit_hwint=yes
;;
# Note the 'l'; we need to be able to match e.g. "shle" or "shl".
-sh[123456789lbe]*-*-*)
+sh[123456789lbe]*-*-* | sh-*-*)
cpu_type=sh
need_64bit_hwint=yes
;;
-tic4x-*-*)
- cpu_type=c4x
- ;;
esac
tm_file=${cpu_type}/${cpu_type}.h
fi
case ${target} in
+i[34567]86-*-*)
+ if test "x$enable_cld" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_CLD=1"
+ fi
+ ;;
x86_64-*-*)
tm_file="i386/biarch64.h ${tm_file}"
+ if test "x$enable_cld" = xyes; then
+ tm_defines="${tm_defines} USE_IX86_CLD=1"
+ fi
;;
esac
extra_options="${extra_options} darwin.opt"
c_target_objs="darwin-c.o"
cxx_target_objs="darwin-c.o"
+ fortran_target_objs="darwin-f.o"
extra_objs="darwin.o"
extra_gcc_objs="darwin-driver.o"
default_use_cxa_atexit=yes
esac
fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
;;
-*-*-linux*libc1* | *-*-linux*aout*)
- # Avoid the generic linux case.
- ;;
*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
# Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
then tmake_file=${cpu_type}/t-$rest
fi
;;
-alpha*-*-unicosmk*)
- use_collect2=yes
- tm_file="${tm_file} alpha/unicosmk.h"
-
- # Don't include t-ieee for now because we don't support that yet
- # tmake_file="alpha/t-ieee"
- tmake_file="alpha/t-unicosmk"
- use_fixproto=yes
- ;;
alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
;;
-arm*-*-freebsd*|strongarm*-*-freebsd*)
+arm*-*-freebsd*)
tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
;;
;;
esac
tm_file="$tm_file arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-uclinux*) # ARM ucLinux
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h arm/uclinux-elf.h"
+ tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h"
tmake_file="arm/t-arm arm/t-arm-elf"
case ${target} in
arm*-*-uclinux-*eabi)
default_use_cxa_atexit=yes
esac
tm_file="$tm_file arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-ecos-elf)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
tmake_file="arm/t-arm arm/t-arm-elf"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-eabi* | arm*-*-symbianelf* )
# The BPABI long long divmod functions return a 128-bit value in
;;
esac
tm_file="${tm_file} arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-*-rtems*)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
-arm*-*-elf | ep9312-*-elf)
+arm*-*-elf)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
tmake_file="arm/t-arm arm/t-arm-elf"
+ tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
arm*-wince-pe*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
-arm*-*-kaos*)
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
- tmake_file="arm/t-arm arm/t-arm-elf"
- ;;
avr-*-rtems*)
tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
tmake_file="avr/t-avr t-rtems avr/t-rtems"
tmake_file=bfin/t-bfin
use_collect2=no
;;
-c4x-*-rtems* | tic4x-*-rtems*)
- tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
- tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
- c_target_objs="c4x-c.o"
- cxx_target_objs="c4x-c.o"
- ;;
-c4x-* | tic4x-*)
- tmake_file=c4x/t-c4x
- c_target_objs="c4x-c.o"
- cxx_target_objs="c4x-c.o"
- ;;
-cris-*-aout)
- tm_file="dbxelf.h ${tm_file} cris/aout.h"
+crisv32-*-elf | crisv32-*-none)
+ tm_file="dbxelf.h elfos.h ${tm_file}"
+ tmake_file="cris/t-cris"
+ target_cpu_default=32
gas=yes
- tmake_file="cris/t-cris cris/t-aout"
- extra_options="${extra_options} cris/aout.opt"
+ extra_options="${extra_options} cris/elf.opt"
;;
cris-*-elf | cris-*-none)
tm_file="dbxelf.h elfos.h ${tm_file}"
gas=yes
extra_options="${extra_options} cris/elf.opt"
;;
-cris-*-linux*)
+crisv32-*-linux* | cris-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
# We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
extra_options="${extra_options} cris/linux.opt"
+ case $target in
+ cris-*-*)
+ target_cpu_default=10
+ ;;
+ crisv32-*-*)
+ target_cpu_default=32
+ ;;
+ esac
;;
crx-*-elf)
tm_file="elfos.h ${tm_file}"
linux.h frv/linux.h frv/frv-abi.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
-h8300-*-rtemscoff*)
- tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
- tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
- ;;
h8300-*-rtems*)
tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
use_fixproto=yes
;;
-hppa*64*-*-linux* | parisc*64*-*-linux*)
+hppa*64*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_PA_20"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
gas=yes gnu_ld=yes
need_64bit_hwint=yes
;;
-hppa*-*-linux* | parisc*-*-linux*)
+hppa*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
#hppa*-*-openbsd*)
# target_cpu_default="MASK_PA_11"
# ;;
-hppa1.1-*-pro*)
- target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
- pa/pa-pro-end.h libgloss.h"
- tmake_file="pa/t-pro"
- ;;
-hppa1.1-*-osf*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
- tmake_file="pa/t-pa"
- use_collect2=yes
- ;;
-hppa1.1-*-bsd*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
- tmake_file="pa/t-pa"
- use_collect2=yes
- ;;
hppa[12]*-*-hpux10*)
case ${target} in
hppa1.1-*-* | hppa2*-*-*)
tmake_file="i386/t-i386elf t-svr4"
use_fixproto=yes
;;
-i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
- if test x$gas = xyes
- then
- tm_file="${tm_file} usegas.h"
- fi
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
i[34567]86-*-aout*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
use_fixproto=yes
;;
-i[34567]86-*-beoself* | i[34567]86-*-beos*)
- tmake_file='i386/t-beos i386/t-crtpic'
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
- extra_parts='crtbegin.o crtend.o'
- ;;
i[34567]86-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
;;
extra_parts="crtbegin.o crtend.o crti.o crtn.o"
tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
;;
-i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
- if test x$gas = xyes
- then
- tm_file="usegas.h ${tm_file}"
- fi
- tmake_file=i386/t-sco5
- extra_parts="crtbegin.o crtend.o"
- extra_options="${extra_options} i386/sco5.opt"
- use_fixproto=yes
- ;;
i[34567]86-*-solaris2*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- tm_file="${tm_file} sol2-6.h"
- ;;
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
;;
if test x$gas = xyes; then
tm_file="usegas.h ${tm_file}"
fi
- case ${target} in
- *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
- tm_file="$tm_file tm-dwarf2.h"
- ;;
- esac
+ tm_file="$tm_file tm-dwarf2.h"
case ${target} in
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
esac
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
"":yes:* | yes:yes:* )
- case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- thread_file=posix95
- ;;
- *)
- thread_file=posix
- ;;
- esac
+ thread_file=posix
;;
"":*:yes | yes:*:yes )
thread_file=solaris
;;
esac
;;
-i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-crtpic t-svr4"
- extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- use_fixproto=yes
- ;;
-i[34567]86-*-sysv4*) # Intel 80386's running system V.4
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-crtpic t-svr4"
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
case ${target} in
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt"
extra_objs="winnt.o winnt-stubs.o"
- c_target_objs=cygwin2.o
- cxx_target_objs="cygwin2.o winnt-cxx.o"
+ c_target_objs="cygwin2.o msformat-c.o"
+ cxx_target_objs="cygwin2.o winnt-cxx.o msformat-c.o"
extra_gcc_objs=cygwin1.o
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
-i[34567]86-*-mingw32* | x86_64-*-mingw32*)
+i[34567]86-*-mingw* | x86_64-*-mingw*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
xm_file=i386/xm-mingw32.h
tmake_file="i386/t-cygming i386/t-mingw32"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt"
extra_objs="winnt.o winnt-stubs.o"
- cxx_target_objs=winnt-cxx.o
+ c_target_objs="msformat-c.o"
+ cxx_target_objs="winnt-cxx.o msformat-c.o"
default_use_cxa_atexit=yes
case ${enable_threads} in
"" | yes | win32)
;;
esac
case ${target} in
- *mingw32crt*)
- tm_file="${tm_file} i386/crtdll.h"
+ x86_64-*-mingw*)
+ tmake_file="${tmake_file} i386/t-crtfm"
;;
- *mingw32msv* | *mingw32*)
+ *)
+ ;;
+ esac
+ case ${target} in
+ *mingw32crt*)
+ tm_file="${tm_file} i386/crtdll.h"
+ ;;
+ *mingw32msv* | *mingw*)
;;
esac
- ;;
-i[34567]86-*-uwin*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
- tmake_file="i386/t-cygwin i386/t-uwin"
- extra_objs=winnt.o
- extra_options="${extra_options} i386/cygming.opt"
- target_gtfiles="\$(srcdir)/config/i386/winnt.c"
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- use_fixproto=yes
;;
i[34567]86-*-interix3*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
tm_file="${tm_file} dbxcoff.h"
fi
;;
-i[34567]86-*-kaos*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
- tmake_file="i386/t-i386elf t-svr4"
- ;;
ia64*-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
;;
# m68hc11 and m68hc12 share the same machine description.
m68hc11-*-*|m6811-*-*)
- tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
+ tm_file="dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h"
tm_p_file="m68hc11/m68hc11-protos.h"
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11-gas"
+ tmake_file="m68hc11/t-m68hc11"
use_fixproto=yes
;;
m68hc12-*-*|m6812-*-*)
- tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
+ tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h m68hc11/m68hc11.h"
tm_p_file="m68hc11/m68hc11-protos.h"
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11-gas"
+ tmake_file="m68hc11/t-m68hc11"
extra_options="${extra_options} m68hc11/m68hc11.opt"
use_fixproto=yes
;;
tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
use_fixproto=yes
;;
-m68020-*-elf* | m68k-*-elf* | fido-*-elf*)
+m68k-*-elf* | fido-*-elf*)
case ${target} in
fido-*-elf*)
# Check that $with_cpu makes sense.
esac
extra_parts="crtbegin.o crtend.o"
;;
-m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
+m68k*-*-netbsdelf*)
default_m68k_cpu=68020
default_cf_cpu=5475
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
tmake_file=mcore/t-mcore
use_fixproto=yes
+ inhibit_libc=true
;;
mcore-*-pe*)
tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
tmake_file=mcore/t-mcore-pe
use_fixproto=yes
+ inhibit_libc=true
;;
mips-sgi-irix[56]*)
tm_file="elfos.h ${tm_file} mips/iris.h"
tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
tmake_file="${tmake_file} mips/t-vxworks"
;;
-mips-wrs-windiss) # Instruction-level simulator for VxWorks.
- xm_defines=POSIX
- tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
- tmake_file="${tmake_file} mips/t-elf mips/t-libgcc-mips16"
- thread_file=
- ;;
mipstx39-*-elf* | mipstx39el-*-elf*)
tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
use_collect2=no
use_fixproto=yes
;;
-mt-*-elf)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- tmake_file="${tmake_file} mt/t-mt"
- ;;
-ns32k-*-netbsdelf*)
- echo "GCC does not yet support the ${target} target"; exit 1
- ;;
-ns32k-*-netbsd*)
- tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
- # On NetBSD, the headers are already okay, except for math.h.
- tmake_file="t-netbsd ns32k/t-ns32k"
- extra_parts=""
- use_collect2=yes
- ;;
pdp11-*-bsd)
tm_file="${tm_file} pdp11/2bsd.h"
use_fixproto=yes
extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
;;
-powerpc-*-beos*)
- tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
- extra_headers=
- use_fixproto=yes
- ;;
powerpc-*-darwin*)
extra_options="${extra_options} rs6000/darwin.opt"
extra_parts="crt2.o"
tmake_file="${tmake_file} rs6000/t-netbsd"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
-powerpc-*-chorusos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- case ${enable_threads} in
- yes | posix)
- thread_file='posix'
- ;;
- esac
- use_fixproto=yes
- ;;
powerpc-*-eabispe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
extra_options="${extra_options} rs6000/sysv4.opt"
powerpc-*-linux*spe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
extra_options="${extra_options} rs6000/sysv4.opt"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*paired*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/750cl.h"
;;
esac
;;
-powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
- tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- thread_file=""
- use_fixproto=yes
- ;;
powerpc-*-lynxos*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
gnu_ld=yes
gas=yes
;;
-powerpcle-*-sysv*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- use_fixproto=yes
- ;;
powerpcle-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
-powerpc-*-kaos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- ;;
-powerpcle-*-kaos*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- ;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
thread_file='aix'
extra_headers=
;;
-rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
+rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix52
extra_options="${extra_options} rs6000/aix64.opt"
thread_file='aix'
extra_headers=altivec.h
;;
+rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
+ tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h"
+ tmake_file=rs6000/t-aix52
+ extra_options="${extra_options} rs6000/aix64.opt"
+ use_collect2=yes
+ thread_file='aix'
+ extra_headers=altivec.h
+ ;;
s390-*-linux*)
tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
tmake_file=score/t-score-elf
extra_objs="score7.o score3.o"
;;
-sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
+sh-*-elf* | sh[12346l]*-*-elf* | \
sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
- sh-*-linux* | sh[346lbe]*-*-linux* | \
+ sh-*-linux* | sh[2346lbe]*-*-linux* | \
sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
sh64-*-netbsd* | sh64l*-*-netbsd*)
tmake_file="${tmake_file} sh/t-sh sh/t-elf"
case ${target} in
sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
tm_file="${tm_file} linux.h sh/linux.h" ;;
- sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
- ;;
sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
sh*-superh-elf) if test x$with_libgloss != xno; then
with_libgloss=yes
fi
use_fixproto=yes
;;
-sh-*-rtemscoff*)
- tmake_file="sh/t-sh t-rtems sh/t-rtems"
- tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
- ;;
sh-*-rtems*)
tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
use_fixproto=yes
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
- tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
+ tmake_file="${tmake_file} sparc/t-linux"
+ if test x$enable_targets = xall; then
+ tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
+ tmake_file="${tmake_file} sparc/t-linux64"
+ else
+ tm_file="${tm_file} sparc/linux.h"
+ fi
+ tmake_file="${tmake_file} sparc/t-crtfm"
;;
sparc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
"":yes:* | yes:yes:* ) thread_file=posix ;;
"":*:yes | yes:*:yes ) thread_file=solaris ;;
esac
- need_64bit_hwint=yes
;;
sparc-*-solaris2*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- tm_file="${tm_file} sol2-6.h"
- ;;
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
;;
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
- case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- if test x$gnu_ld = xno; then
- tm_file="${tm_file} sparc/sol26-sld.h"
- fi
- ;;
- *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
- tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld-bi.h"
- fi
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas-bi.h"
- fi
- tm_file="${tm_file} tm-dwarf2.h"
- tmake_file="$tmake_file sparc/t-sol2-64"
- need_64bit_hwint=yes
- test x$with_cpu != x || with_cpu=v9
- ;;
- esac
+ tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sparc/sol2-gld-bi.h"
+ fi
+ if test x$gas = xyes; then
+ tm_file="${tm_file} sparc/sol2-gas-bi.h"
+ fi
+ tm_file="${tm_file} tm-dwarf2.h"
+ tmake_file="$tmake_file sparc/t-sol2-64"
+ test x$with_cpu != x || with_cpu=v9
c_target_objs="sol2-c.o"
cxx_target_objs="sol2-c.o"
extra_objs="sol2.o"
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
"":yes:* | yes:yes:* )
- case ${target} in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
- thread_file=posix95
- ;;
- *)
- thread_file=posix
- ;;
- esac
+ thread_file=posix
;;
"":*:yes | yes:*:yes )
thread_file=solaris
;;
esac
;;
-sparc-*-sysv4*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
sparc-wrs-vxworks)
tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
tmake_file="${tmake_file} sparc/t-vxworks"
x) with_cpu=ultrasparc ;;
*) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
esac
- need_64bit_hwint=yes
;;
sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h sparc/linux64.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
;;
c_target_objs="${c_target_objs} spu-c.o"
cxx_target_objs="${cxx_target_objs} spu-c.o"
;;
-strongarm-*-elf*)
- tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-strongarm-elf"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- use_fixproto=yes
- ;;
-strongarm-*-pe)
- tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
- tmake_file="arm/t-arm arm/t-strongarm-pe"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- extra_options="${extra_options} arm/pe.opt"
- extra_objs=pe.o
- use_fixproto=yes
- ;;
-strongarm-*-kaos*)
- tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
- tmake_file="arm/t-arm arm/t-strongarm-elf"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- ;;
v850e1-*-*)
target_cpu_default="TARGET_CPU_v850e1"
tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
cxx_target_objs="v850-c.o"
use_fixproto=yes
;;
-vax-*-bsd*) # VAXen running BSD
- tm_file="${tm_file} vax/bsd.h"
- tmake_file=vax/t-memfuncs
- use_collect2=yes
- use_fixproto=yes
- ;;
-vax-*-sysv*) # VAXen running system V
- tm_file="${tm_file} vax/vaxv.h"
- tmake_file=vax/t-memfuncs
- use_fixproto=yes
- ;;
vax-*-netbsdelf*)
tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
;;
tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
use_collect2=yes
;;
-vax-*-ultrix*) # VAXen running ultrix
- tm_file="${tm_file} vax/ultrix.h"
- tmake_file=vax/t-memfuncs
- use_fixproto=yes
- ;;
-xscale-*-elf)
- tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-xscale-elf"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- use_fixproto=yes
- ;;
-xscale-*-coff)
- tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
- tmake_file="arm/t-arm arm/t-xscale-coff"
- out_file=arm/arm.c
- md_file=arm/arm.md
- extra_modes=arm/arm-modes.def
- use_fixproto=yes
- ;;
xstormy16-*-elf)
# For historical reasons, the target files omit the 'x'.
tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
esac
case ${target} in
-i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
- tmake_file="${tmake_file} i386/t-gmm_malloc"
- ;;
i[34567]86-*-linux* | x86_64-*-linux*)
tmake_file="${tmake_file} i386/t-pmm_malloc"
;;
# This block sets nothing except for with_cpu.
if test x$with_cpu = x ; then
case ${target} in
- ep9312-*-*)
- # A Cirrus ARM variant.
- with_cpu="ep9312"
- ;;
i386-*-*)
with_cpu=i386
;;
frv550-*-*linux*)
with_cpu=fr550
;;
- m680[012]0-*-*)
- with_cpu=`echo ${target} | sed 's/-.*$//'`
- ;;
m68k*-*-*)
case "$with_arch" in
"cf")
esac
fi
-# Similarly for --with-float
-if test x$with_float = x; then
- case ${target} in
- ep9312-*-*)
- with_float=hard
- ;;
- esac
-fi
-
# Similarly for --with-schedule.
if test x$with_schedule = x; then
case ${target} in
- hppa1* | parisc1*)
+ hppa1*)
# Override default PA8000 scheduling model.
with_schedule=7100LC
;;
case "$with_arch" in
"" \
| armv[23456] | armv2a | armv3m | armv4t | armv5t \
- | armv5te | armv6j |armv6k | armv6z | armv6zk \
+ | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
+ | armv7 | armv7-a | armv7-r | armv7-m \
| iwmmxt | ep9312)
# OK
;;
esac
;;
- fido-*-* | m680[012]0-*-* | m68k*-*-*)
+ fido-*-* | m68k*-*-*)
supported_defaults="arch cpu"
case "$with_arch" in
"" | "m68k"| "cf")
esac
;;
- hppa*-*-* | parisc*-*-*)
+ hppa*-*-*)
supported_defaults="arch schedule"
case "$with_arch" in
esac
;;
- mt-*-*)
- supported_defaults="arch"
-
- case "$with_arch" in
- "" \
- | ms1-64-001 \
- | ms1-16-002 \
- | ms1-16-003 \
- | ms2 \
- | "")
- # OK
- ;;
- *)
- echo "Unknown arch used in --with-arch=$with_arch" 1>&2
- exit 1
- ;;
- esac
- ;;
-
powerpc*-*-* | rs6000-*-*)
supported_defaults="cpu float tune"
"" | common \
| power | power[23456] | power6x | powerpc | powerpc64 \
| rios | rios1 | rios2 | rsc | rsc1 | rs64a \
- | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
- | 601 | 602 | 603 | 603e | ec603e | 604 \
- | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
+ | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
+ | 505 | 601 | 602 | 603 | 603e | ec603e | 604 \
+ | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 | e300c[23] \
| 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
# OK
;;
for which in arch tune; do
eval "val=\$with_$which"
case ${val} in
- "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec)
+ "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
# OK
;;
*)
fi
;;
- hppa*-*-* | parisc*-*-*)
+ hppa*-*-*)
target_cpu_default2="MASK_BIG_SWITCH"
if test x$gas = xyes
then
fi
;;
- fido*-*-* | m680[012]0-*-* | m68k*-*-*)
+ fido*-*-* | m68k*-*-*)
target_cpu_default2=$m68k_cpu_ident
if [ x"$m68k_arch_family" != x ]; then
tmake_file="m68k/t-$m68k_arch_family $tmake_file"