#You should have received a copy of the GNU General Public License
#along with GCC; see the file COPYING. If not, write to the Free
-#Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-#02111-1307, USA.
+#Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+#02110-1301, USA.
# This is the GCC target-specific configuration file
# where a configuration type is mapped to different system-specific
# Obsolete configurations.
case ${target} in
- sparc-*-openbsd* \
- | i860-*-sysv4* \
- | ip2k-*-elf \
- | ns32k-*-netbsdelf* \
- | ns32k-*-netbsd* \
+ c4x-* \
+ | tic4x-* \
)
if test "x$enable_obsolete" != xyes; then
echo "*** Configuration ${target} is obsolete." >&2
cpu_type=`echo ${target} | sed 's/-.*$//'`
cpu_is_64bit=
case ${target} in
+m32c*-*-*)
+ cpu_type=m32c
+ tmake_file=m32c/t-m32c
+ ;;
alpha*-*-*)
cpu_type=alpha
need_64bit_hwint=yes
ep9312*-*-*)
cpu_type=arm
;;
+frv*) cpu_type=frv
+ ;;
xscale-*-*)
cpu_type=arm
extra_headers="mmintrin.h"
# Common parts for widely ported systems.
case ${target} in
*-*-darwin*)
- case ${target} in
- *-darwin1[0-9]*) tm_file="${tm_file} darwin8.h" ;;
- *-darwin[0-6]*) ;;
- *-darwin7*) tm_file="${tm_file} darwin7.h" ;;
- *) tm_file="${tm_file} darwin8.h" ;;
- esac
- tm_file="${tm_file} darwin.h"
+ tm_file="${tm_file} darwin.h ${cpu_type}/darwin.h"
tm_p_file="${tm_p_file} darwin-protos.h"
- tmake_file="t-darwin t-slibgcc-darwin"
+ tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
target_gtfiles="\$(srcdir)/config/darwin.c"
extra_options="${extra_options} darwin.opt"
c_target_objs="darwin-c.o"
tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
*-*-freebsd6 | *-*-freebsd[6].*)
tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
+ *-*-freebsd7 | *-*-freebsd[7].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
+ *-*-freebsd8 | *-*-freebsd[8].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
+ *-*-freebsd9 | *-*-freebsd[9].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
*)
echo 'Please update *-*-freebsd* in gcc/config.gcc'
exit 1
;;
*-*-vxworks*)
tmake_file=t-vxworks
- tm_file="${tm_file} elfos.h svr4.h vxworks.h"
+ tm_file="${tm_file} elfos.h svr4.h"
+ xm_defines=POSIX
+ extra_options="${extra_options} vxworks.opt"
case ${enable_threads} in
no) ;;
"" | yes | vxworks) thread_file='vxworks' ;;
*) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
esac
- use_collect2=yes
- xm_defines=POSIX
;;
esac
use_collect2=yes
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
- tmake_file="${tmake_file} arm/t-arm arm/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
+ tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+ tmake_file="${tmake_file} t-linux arm/t-arm"
+ case ${target} in
+ arm*-*-linux-gnueabi)
+ tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
+ tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
+ # The BPABI long long divmod functions return a 128-bit value in
+ # registers r0-r3. Correctly modeling that requires the use of
+ # TImode.
+ need_64bit_hwint=yes
+ # The EABI requires the use of __cxa_atexit.
+ default_use_cxa_atexit=yes
+ ;;
+ *)
+ tmake_file="$tmake_file arm/t-linux"
+ ;;
+ esac
+ tm_file="$tm_file arm/aout.h arm/arm.h"
;;
arm*-*-uclinux*) # ARM ucLinux
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
arm*-wince-pe*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
tmake_file="arm/t-arm arm/t-wince-pe"
+ extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
arm-*-pe*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
tmake_file="arm/t-arm arm/t-pe"
+ extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
arm*-*-kaos*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
tmake_file=bfin/t-bfin-elf
use_collect2=no
- ;;
+ ;;
+bfin*-uclinux*)
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
+ tmake_file=bfin/t-bfin-elf
+ use_collect2=no
+ ;;
bfin*-*)
tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
tmake_file=bfin/t-bfin
use_collect2=no
- ;;
+ ;;
c4x-*-rtems* | tic4x-*-rtems*)
tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
tm_file="dbxelf.h ${tm_file} cris/aout.h"
gas=yes
tmake_file="cris/t-cris cris/t-aout"
+ extra_options="${extra_options} cris/aout.opt"
;;
cris-*-elf | cris-*-none)
tm_file="dbxelf.h elfos.h ${tm_file}"
tmake_file="cris/t-cris cris/t-elfmulti"
gas=yes
+ extra_options="${extra_options} cris/elf.opt"
;;
cris-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
# We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
+ extra_options="${extra_options} cris/linux.opt"
+ ;;
+crx-*-elf)
+ tm_file="elfos.h ${tm_file}"
+ extra_parts="crtbegin.o crtend.o"
+ use_collect2=no
;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
linux.h frv/linux.h frv/frv-abi.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
-h8300-*-rtems*)
+h8300-*-rtemscoff*)
tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
;;
+h8300-*-rtems*)
+ tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
+ tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
+ ;;
h8300-*-elf*)
tmake_file="h8300/t-h8300 h8300/t-elf"
tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="${tmake_file} pa/t-linux"
- # if not configured with --enable-sjlj-exceptions, bump the
- # libgcc version number
- if test x$sjlj != x1; then
- tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
+ # Set the libgcc version number
+ if test x$sjlj = x1; then
+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
+ else
+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
fi
;;
# port not yet contributed.
tmake_file="pa/t-pa"
use_collect2=yes
;;
-hppa1.1-*-rtems*)
- target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
- tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
- pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
- tmake_file="pa/t-pro t-rtems"
- ;;
hppa1.1-*-bsd*)
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
tmake_file="${tmake_file} pa/t-dce-thr"
;;
esac
+ # Set the libgcc version number
+ if test x$sjlj = x1; then
+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
+ else
+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
+ fi
use_collect2=yes
use_fixproto=yes
;;
pa/pa-hpux1010.opt pa/pa64-hpux.opt"
need_64bit_hwint=yes
tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
+ # Set the libgcc version number
+ if test x$sjlj = x1; then
+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
+ else
+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
+ fi
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
case x${enable_threads} in
xyes | xposix )
;;
esac
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+ # Set the libgcc version number
+ if test x$sjlj = x1; then
+ tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
+ else
+ tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
+ fi
case x${enable_threads} in
xyes | xposix )
thread_file=posix
use_collect2=yes
;;
i[34567]86-*-darwin*)
- tm_file="${tm_file} i386/darwin.h"
+ # All the configuration is presently done generically.
;;
i[34567]86-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
then
tm_file="${tm_file} usegas.h"
fi
- xm_defines="SMALL_ARG_MAX"
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
esac
- tmake_file="${tmake_file} i386/t-crtstuff"
+ tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm"
;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
esac
- tmake_file="${tmake_file} i386/t-linux64"
+ tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm"
;;
i[34567]86-*-gnu*)
;;
use_fixproto=yes
;;
i[34567]86-*-solaris2*)
- xm_defines="SMALL_ARG_MAX"
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
case ${target} in
*-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
use_fixproto=yes
;;
i[34567]86-*-sysv4*) # Intel 80386's running system V.4
- xm_defines="SMALL_ARG_MAX"
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
if test x$stabs = xyes
then
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
-i[4567]86-wrs-vxworks)
- tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
- tmake_file="${tmake_file} i386/t-vxworks"
+i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
+ tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
+ case ${target} in
+ *-vxworksae*)
+ tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
+ tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
+ ;;
+ *)
+ tm_file="${tm_file} vxworks.h i386/vxworks.h"
+ tmake_file="${tmake_file} i386/t-vxworks"
+ ;;
+ esac
;;
i[34567]86-*-pe | i[34567]86-*-cygwin*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
tmake_file="i386/t-cygwin i386/t-cygming"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt"
- extra_objs=winnt.o
+ extra_objs="winnt.o winnt-stubs.o"
c_target_objs=cygwin2.o
- cxx_target_objs=cygwin2.o
+ cxx_target_objs="cygwin2.o winnt-cxx.o"
extra_gcc_objs=cygwin1.o
if test x$enable_threads = xyes; then
thread_file='posix'
tmake_file="i386/t-cygming i386/t-mingw32"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt"
- extra_objs=winnt.o
+ extra_objs="winnt.o winnt-stubs.o"
+ cxx_target_objs=winnt-cxx.o
case ${enable_threads} in
"" | yes | win32) thread_file='win32' ;;
esac
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
tmake_file="i386/t-i386elf t-svr4"
;;
-i860-*-sysv4*)
- tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h"
- tmake_file="i860/t-i860 i860/t-svr4"
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
ia64*-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
# in ia64/t-hpux, and also fix the definition of putenv in
# sys-protos.h (const char not char).
;;
-ip2k-*-elf)
- tm_file="elfos.h ${tm_file}"
- use_fixproto=yes
- ;;
iq2000*-*-elf*)
tm_file="svr4.h elfos.h iq2000/iq2000.h"
tmake_file=iq2000/t-iq2000
;;
m32r-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
# We override the tmake_file for linux -- why?
tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
;;
m32rle-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
# We override the tmake_file for linux -- why?
tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
tm_defines="MOTOROLA USE_GAS"
tmake_file=m68k/t-m68kelf
extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
use_collect2=no
use_fixproto=yes
;;
+mt-*-elf)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ tmake_file="${tmake_file} mt/t-mt"
+ ;;
ns32k-*-netbsdelf*)
echo "GCC does not yet support the ${target} target"; exit 1
;;
pdp11-*-*)
use_fixproto=yes
;;
-avr-*-*)
- use_fixproto=yes
- ;;
# port not yet contributed
#powerpc-*-openbsd*)
# tmake_file="${tmake_file} rs6000/t-fprules "
test x$with_cpu != x || cpu_is_64bit=yes
test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
+ if test x${enable_secureplt} = xyes; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
;;
powerpc64-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
;;
powerpc-*-beos*)
use_fixproto=yes
;;
powerpc-*-darwin*)
- tm_file="${tm_file} rs6000/darwin.h"
- tmake_file="${tmake_file} rs6000/t-darwin"
+ extra_options="${extra_options} rs6000/darwin.opt"
case ${target} in
- *-darwin1[0-9]*) tmake_file="${tmake_file} rs6000/t-darwin8" ;;
- *-darwin[0-7]*) ;;
- *-darwin[8-9]*) tmake_file="${tmake_file} rs6000/t-darwin8" ;;
+ *-darwin1[0-9]* | *-darwin[8-9]*)
+ tmake_file="${tmake_file} rs6000/t-darwin8"
+ tm_file="${tm_file} rs6000/darwin8.h"
+ ;;
+ *-darwin7*)
+ tm_file="${tm_file} rs6000/darwin7.h"
+ ;;
+ *-darwin[0-6]*)
+ ;;
esac
extra_headers=altivec.h
;;
powerpc*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
tmake_file="${tmake_file} rs6000/t-netbsd"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-chorusos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
case ${enable_threads} in
yes | posix)
thread_file='posix'
;;
powerpc-*-eabispe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-spe rs6000/t-ppccomm"
;;
powerpc-*-eabisimaltivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabisim*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
use_fixproto=yes
;;
powerpc-*-eabialtivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
;;
powerpc-*-eabi*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
;;
powerpc-*-linux*altivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*spe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
case ${enable_targets}:${cpu_is_64bit} in
*powerpc64* | all:* | *:yes)
fi
tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
tmake_file="$tmake_file rs6000/t-linux64"
+ extra_options="${extra_options} rs6000/linux64.opt"
;;
*)
tm_file="${tm_file} rs6000/linux.h"
;;
esac
+ if test x${enable_secureplt} = xyes; then
+ tm_file="rs6000/secureplt.h ${tm_file}"
+ fi
;;
powerpc-*-gnu-gnualtivec*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
+ extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
if test x$enable_threads = xyes; then
thread_file='posix'
powerpc-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
-powerpc-wrs-vxworks*)
+powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
# We want vxworks.h after rs6000/sysv4.h, which unfortunately
# means we have to redo the tm_file list from scratch.
tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
- tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
+ extra_options="${extra_options} rs6000/sysv4.opt"
extra_headers=ppc-asm.h
+ case ${target} in
+ *-vxworksae*)
+ tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
+ tmake_file="${tmake_file} rs6000/t-vxworksae"
+ ;;
+ *-vxworks*)
+ tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
+ ;;
+ esac
;;
-powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
+powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
- thread_file=""
+ tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
+ thread_file=""
use_fixproto=yes
- ;;
+ ;;
powerpc-*-lynxos*)
xm_defines=POSIX
tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
tmake_file="t-lynx rs6000/t-lynx"
+ extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
extra_options="${extra_options} lynx.opt"
thread_file=lynx
powerpcle-*-sysv*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
use_fixproto=yes
;;
powerpcle-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
use_fixproto=yes
;;
powerpcle-*-eabisim*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpcle-*-eabi*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-kaos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpcle-*-kaos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ extra_options="${extra_options} rs6000/sysv4.opt"
;;
rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
tmake_file="rs6000/t-fprules rs6000/t-newas"
+ extra_options="${extra_options} rs6000/aix41.opt"
use_collect2=yes
extra_headers=
use_fixproto=yes
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix43
+ extra_options="${extra_options} rs6000/aix64.opt"
use_collect2=yes
thread_file='aix'
extra_headers=
;;
rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
+ extra_options="${extra_options} rs6000/aix64.opt"
tmake_file=rs6000/t-aix43
use_collect2=yes
thread_file='aix'
rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
tmake_file=rs6000/t-aix52
+ extra_options="${extra_options} rs6000/aix64.opt"
use_collect2=yes
thread_file='aix'
extra_headers=
tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
;;
s390x-ibm-tpf*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
- tm_p_file=s390/s390-protos.h
- md_file=s390/s390.md
- extra_modes=s390/s390-modes.def
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- out_file=s390/s390.c
- tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
- thread_file='tpf'
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
+ tm_p_file=s390/s390-protos.h
+ md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
+ out_file=s390/s390.c
+ extra_parts="crtbeginS.o crtendS.o"
+ tmake_file="s390/t-crtstuff s390/t-tpf"
+ thread_file='tpf'
+ extra_options="${extra_options} s390/tpf.opt"
;;
sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
sh5-32media | sh5-32media-nofpu | \
sh5-compact | sh5-compact-nofpu)
tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
- tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`"
+ tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`=1"
;;
*)
echo "with_multilib_list=${sh_multilib} not supported."
esac
done
if test x${enable_incomplete_targets} == xyes ; then
- tm_defines="$tm_defines SUPPORT_SH1 SUPPORT_SH2E SUPPORT_SH4 SUPPORT_SH4_SINGLE SUPPORT_SH2A SUPPORT_SH2A_SINGLE SUPPORT_SH5_32MEDIA SUPPORT_SH5_32MEDIA_NOFPU SUPPORT_SH5_64MEDIA SUPPORT_SH5_64MEDIA_NOFPU"
+ tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
fi
use_fixproto=yes
;;
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
;;
-sparc-*-openbsd*)
- tm_defines=OBSD_OLD_GAS
- tm_file="sparc/sparc.h openbsd.h sparc/openbsd.h"
- # needed to unconfuse gdb
- tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
sparc64-*-openbsd*)
tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
extra_options="${extra_options} sparc/little-endian.opt"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
sparc64-*-solaris2* | sparcv9-*-solaris2*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h tm-dwarf2.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
fi
if test x$gas = xyes; then
tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
fi
+ tm_file="${tm_file} tm-dwarf2.h"
tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
if test x$gnu_ld = xyes; then
tmake_file="$tmake_file t-slibgcc-elf-ver"
fi
;;
*-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
- tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h tm-dwarf2.h"
+ tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld-bi.h"
fi
if test x$gas = xyes; then
tm_file="${tm_file} sparc/sol2-gas-bi.h"
fi
+ tm_file="${tm_file} tm-dwarf2.h"
tmake_file="$tmake_file sparc/t-sol2-64"
need_64bit_hwint=yes
;;
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
+ extra_options="${extra_options} arm/pe.opt"
extra_objs=pe.o
use_fixproto=yes
;;
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
use_collect2=no
;;
+m32c-*-elf*)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+ c_target_objs="m32c-pragma.o"
+ cxx_target_objs="m32c-pragma.o"
+ use_fixproto=yes
+ ;;
*)
echo "*** Configuration ${target} not supported" 1>&2
exit 1
alphaev5*-*-*)
with_cpu=ev5
;;
- frv-*-*linux*)
+ frv-*-*linux* | frv400-*-*linux*)
with_cpu=fr400
;;
+ frv550-*-*linux*)
+ with_cpu=fr550
+ ;;
sparc*-*-*)
with_cpu="`echo ${target} | sed 's/-.*$//'`"
if [ x$with_cpu = xsparc64 ]; then
supported_defaults=cpu
case "$with_cpu" in
fr400) ;;
+ fr550) ;;
*)
echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
exit 1
esac
;;
+ mt-*-*)
+ supported_defaults="arch"
+
+ case "$with_arch" in
+ "" \
+ | ms1-64-001 \
+ | ms1-16-002 \
+ | ms1-16-003 \
+ | ms2 \
+ | "")
+ # OK
+ ;;
+ *)
+ echo "Unknown arch used in --with-arch=$with_arch" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
powerpc*-*-* | rs6000-*-*)
supported_defaults="cpu float tune"
with_which="with_$which"
eval $with_which=
;;
+ 405cr)
+ tm_defines="${tm_defines} CONFIG_PPC405CR"
+ eval "with_$which=405"
+ ;;
"" | common \
| power | power[2345] | powerpc | powerpc64 \
| rios | rios1 | rios2 | rsc | rsc1 | rs64a \
for which in arch tune; do
eval "val=\$with_$which"
case ${val} in
- "" | g5 | g6 | z900 | z990)
+ "" | g5 | g6 | z900 | z990 | z9-109)
# OK
;;
*)
;;
esac
- # The Sparc port checks this value at compile-time.
+ # The SPARC port checks this value at compile-time.
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
v850*-*-*)
;;
*)
echo "This target does not support --with-$option." 2>&1
+ echo "Valid --with options are: $supported_defaults" 2>&1
exit 1
;;
esac
OSDN Git Service
