# GCC target-specific configuration file.
-# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.
#This file is part of GCC.
# configure script. Putting it in a separate shell file lets us skip
# running autoconf when modifying target-specific information.
-# This file switches on the shell variable ${machine}, and also uses the
+# This file switches on the shell variable ${target}, and also uses the
# following shell variables:
#
# with_* Various variables as set by configure.
# This file sets the following shell variables for use by the
# autoconf-generated configure script:
#
-# cpu_type The name of the cpu, if different from machine.
+# cpu_type The name of the cpu, if different from the first
+# chunk of the canonical target name.
#
# tm_defines List of target macros to define for all compilations.
#
# tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
# Note that the preferred order is:
# - specific target header "${cpu_type}/${cpu_type.h}"
-# - generic headers like dbxelf.h elfos.h, netware.h, etc.
+# - generic headers like dbxelf.h elfos.h, etc.
# - specializing target headers like ${cpu_type.h}/elf.h
# This helps to keep OS specific stuff out of the CPU
# defining header ${cpu_type}/${cpu_type.h}.
# configure_default_options
# Set to an initializer for configure_default_options
# in configargs.h, based on --with-cpu et cetera.
+#
+# use_fixproto Set to "yes" if fixproto should be run normally,
+# "no" if fixproto should never be run.
# The following variables are used in each case-construct to build up the
# outgoing variables:
target_gtfiles=
need_64bit_hwint=
+# Default to not using fixproto. Targets which need fixproto should
+# specifically set this to 'yes'.
+use_fixproto=no
+
# Don't carry these over build->host->target. Please.
xm_file=
md_file=
# Obsolete configurations.
-case $machine in
- dummy)
+case ${target} in
+ dummy*)
if test "x$enable_obsolete" != xyes; then
- echo "*** Configuration $machine is obsolete." >&2
+ echo "*** Configuration ${target} is obsolete." >&2
echo "*** Specify --enable-obsolete to build it anyway." >&2
echo "*** Support will be REMOVED in the next major release of GCC," >&2
echo "*** unless a maintainer comes forward." >&2
# Unsupported targets list. Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern. The list
# should be in alphabetical order.
-case $machine in
+case ${target} in
alpha*-*-linux*libc1* \
| i[34567]86-sequent-sysv \
| i[34567]86-sequent-sysv[123]* \
| *-*-linux*oldld* \
| *-*-rtemsaout* \
| *-*-rtemscoff* \
+ | vax-*-vms* \
)
- echo "*** Configuration $machine not supported" 1>&2
+ echo "*** Configuration ${target} not supported" 1>&2
exit 1
;;
esac
# updated in each machine entry. Also set default extra_headers for some
# machines.
tm_p_file=
-cpu_type=`echo $machine | sed 's/-.*$//'`
-case $machine in
+cpu_type=`echo ${target} | sed 's/-.*$//'`
+case ${target} in
alpha*-*-*)
cpu_type=alpha
need_64bit_hwint=yes
hppa*-*-* | parisc*-*-*)
cpu_type=pa
;;
+m32r*-*-*)
+ cpu_type=m32r
+ ;;
m680[012]0-*-*)
cpu_type=m68k
extra_headers=math-68881.h
extra_modes=${cpu_type}/${cpu_type}-modes.def
fi
-case $machine in
+case ${target} in
x86_64-*-*)
tm_file="i386/biarch64.h ${tm_file}"
;;
esac
# On a.out targets, we need to use collect2.
-case $machine in
+case ${target} in
*-*-*aout*)
use_collect2=yes
;;
esac
# Common parts for widely ported systems.
-case $machine in
+case ${target} in
+*-*-darwin*)
+ tm_file="${tm_file} darwin.h"
+ tm_p_file="${tm_p_file} darwin-protos.h"
+ tmake_file="t-darwin"
+ target_gtfiles="\$(srcdir)/config/darwin.c"
+ c_target_objs="darwin-c.o"
+ cxx_target_objs="darwin-c.o"
+ extra_parts="crt2.o"
+ extra_objs="darwin.o"
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ ;;
+*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
+ # This is the place-holder for the generic a.out configuration
+ # of FreeBSD. No actual configuration resides here since
+ # there was only ever a bare-bones ix86 configuration for
+ # a.out and it exists solely in the machine-specific section.
+ # This place-holder must exist to avoid dropping into
+ # the generic ELF configuration of FreeBSD (i.e. it must be
+ # ordered before that section).
+ ;;
+*-*-freebsd*)
+ # This is the generic ELF configuration of FreeBSD. Later
+ # machine-specific sections may refine and add to this
+ # configuration.
+ #
+ # Due to tm_file entry ordering issues that vary between cpu
+ # architectures, we only define fbsd_tm_file to allow the
+ # machine-specific section to dictate the final order of all
+ # entries of tm_file with the minor exception that components
+ # of the tm_file set here will always be of the form:
+ #
+ # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
+ #
+ # The machine-specific section should not tamper with this
+ # ordering but may order all other entries of tm_file as it
+ # pleases around the provided core setting.
+ gas=yes
+ gnu_ld=yes
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+ case ${target} in
+ *-*-freebsd3 | *-*-freebsd[3].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
+ *-*-freebsd4 | *-*-freebsd[4].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
+ *-*-freebsd5 | *-*-freebsd[5].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
+ *-*-freebsd6 | *-*-freebsd[6].*)
+ tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
+ *)
+ echo 'Please update *-*-freebsd* in gcc/config.gcc'
+ exit 1
+ ;;
+ esac
+ tmake_file="t-slibgcc-elf-ver t-freebsd"
+ case ${enable_threads} in
+ no)
+ fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
+ ;;
+ "" | yes | posix)
+ thread_file='posix'
+ tmake_file="${tmake_file} t-freebsd-thread"
+ # Before 5.0, FreeBSD can't bind shared libraries to -lc
+ # when "optionally" threaded via weak pthread_* checks.
+ case ${target} in
+ *-*-freebsd[34] | *-*-freebsd[34].*)
+ tmake_file="${tmake_file} t-slibgcc-nolc-override"
+ ;;
+ esac
+ ;;
+ *)
+ echo 'Unknown thread configuration for FreeBSD'
+ exit 1
+ ;;
+ esac
+ fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
+ ;;
+*-*-kfreebsd*-gnu)
+ # Must come before *-*-gnu*
+ xm_defines=POSIX # needed for cross-compiling from FreeBSD?
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ # GNU tools are the only tools.
+ gas=yes
+ gnu_ld=yes
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ ;;
+*-*-linux*libc1* | *-*-linux*aout*)
+ # Avoid the generic linux case.
+ ;;
*-*-linux*)
- case $machine in
- *-*-linux*libc1* | *-*-linux*aout*)
- ;;
- *)
- extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
- gas=yes gnu_ld=yes
- case x${enable_threads} in
- x | xyes | xposix) thread_file='posix'
- ;;
- esac
- ;;
- esac
- ;;
+ # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ gas=yes
+ gnu_ld=yes
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ ;;
*-*-gnu*)
- # On the Hurd, the setup is just about the same on
- # each different CPU. The specific machines that we
- # support are matched above and just set $cpu_type.
- tm_file="${cpu_type}/gnu.h"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- # GNU always uses ELF.
- elf=yes
- # GNU tools are the only tools.
- gnu_ld=yes
- gas=yes
- # These details are the same as for Linux.
- # But here we need a little extra magic.
- tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
- case $machine in
- alpha*)
- tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
- ;;
- i[34567]86-*-*)
- tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
- ;;
- esac
- ;;
-*-*-openbsd*)
- tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- tmake_file="${tmake_file} t-openbsd-thread"
- fi
- ;;
+ # On the Hurd, the setup is just about the same on
+ # each different CPU. The specific machines that we
+ # support are matched above and just set $cpu_type.
+ tm_file="${cpu_type}/gnu.h"
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ # GNU tools are the only tools.
+ gas=yes
+ gnu_ld=yes
+ # These details are the same as for Linux.
+ # But here we need a little extra magic.
+ tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
+ case ${target} in
+ alpha*)
+ tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
+ ;;
+ i[34567]86-*-*)
+ tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
+ ;;
+ esac
+ ;;
*-*-netbsd*)
- tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
- gas=yes
- gnu_ld=yes
+ tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
+ gas=yes
+ gnu_ld=yes
- # NetBSD 2.0 and later get POSIX threads enabled by default.
- # Allow them to be explicitly enabled on any other version.
- case x${enable_threads} in
- x)
- case $machine in
- *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
- thread_file='posix'
- tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
- ;;
- esac
- ;;
- xyes | xposix)
- thread_file='posix'
- tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
- ;;
- esac
+ # NetBSD 2.0 and later get POSIX threads enabled by default.
+ # Allow them to be explicitly enabled on any other version.
+ case ${enable_threads} in
+ "")
+ case ${target} in
+ *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
+ thread_file='posix'
+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
+ ;;
+ esac
+ ;;
+ yes | posix)
+ thread_file='posix'
+ tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
+ ;;
+ esac
- # NetBSD 1.7 and later are set up to use GCC's crtstuff for
- # ELF configurations. We will clear extra_parts in the
- # a.out configurations.
- case $machine in
- *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- ;;
- esac
+ # NetBSD 1.7 and later are set up to use GCC's crtstuff for
+ # ELF configurations. We will clear extra_parts in the
+ # a.out configurations.
+ case ${target} in
+ *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
+ extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
+ ;;
+ esac
- # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
- # default (unless overridden by --disable-__cxa_atexit).
- case $machine in
- *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
- default_use_cxa_atexit=yes
- ;;
- esac
- ;;
-*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
- # This is the place-holder for the generic a.out configuration
- # of FreeBSD. No actual configuration resides here since
- # there was only ever a bare-bones ix86 configuration for
- # a.out and it exists solely in the machine-specific section.
- # This place-holder must exist to avoid dropping into
- # the generic ELF configuration of FreeBSD (i.e. it must be
- # ordered before that section).
- ;;
-*-*-freebsd*)
- # This is the generic ELF configuration of FreeBSD. Later
- # machine-specific sections may refine and add to this
- # configuration.
- #
- # Due to tm_file entry ordering issues that vary between cpu
- # architectures, we only define fbsd_tm_file to allow the
- # machine-specific section to dictate the final order of all
- # entries of tm_file with the minor exception that components
- # of the tm_file set here will always be of the form:
- #
- # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
- #
- # The machine-specific section should not tamper with this
- # ordering but may order all other entries of tm_file as it
- # pleases around the provided core setting.
- gas=yes
- gnu_ld=yes
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- case $machine in
- *-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";;
- *-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";;
- *-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";;
- *-*-freebsd6 | *-*-freebsd[6].*) fbsd_tm_file="freebsd6.h";;
- *) echo 'Please update *-*-freebsd* in gcc/config.gcc'; exit 1;;
- esac
- tmake_file="t-slibgcc-elf-ver t-freebsd"
- case x${enable_threads} in
- xno) fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h";;
- x | xyes | xpthreads | xposix)
- thread_file='posix'
- tmake_file="${tmake_file} t-freebsd-thread"
- # Before 5.0, FreeBSD can't bind shared libraries to -lc
- # when "optionally" threaded via weak pthread_* checks.
- case $machine in
- *-*-freebsd[34] | *-*-freebsd[34].*)
- tmake_file="${tmake_file} t-slibgcc-nolc-override";;
- esac
- ;;
- *) echo 'Unknown thread configuration for FreeBSD'; exit 1;;
- esac
- fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
- ;;
-*-*-darwin*)
- tm_file="${tm_file} darwin.h"
- tm_p_file="${tm_p_file} darwin-protos.h"
- tmake_file="t-darwin"
- target_gtfiles="\$(srcdir)/config/darwin.c"
- c_target_objs="darwin-c.o"
- cxx_target_objs="darwin-c.o"
- extra_parts="crt2.o"
- extra_objs="darwin.o"
- case x${enable_threads} in
- x | xyes | xposix) thread_file='posix'
- ;;
- esac
- ;;
+ # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
+ # default (unless overridden by --disable-__cxa_atexit).
+ case ${target} in
+ *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
+ default_use_cxa_atexit=yes
+ ;;
+ esac
+ ;;
+*-*-openbsd*)
+ tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
+ case ${enable_threads} in
+ yes)
+ thread_file='posix'
+ tmake_file="${tmake_file} t-openbsd-thread"
+ ;;
+ esac
+ ;;
+*-*-rtems*)
+ case ${enable_threads} in
+ yes) thread_file='rtems' ;;
+ esac
+ ;;
*-*-vxworks*)
- tmake_file=t-vxworks
- tm_file="${tm_file} elfos.h svr4.h vxworks.h"
- thread_file='vxworks'
- use_collect2=yes
- ;;
+ tmake_file=t-vxworks
+ tm_file="${tm_file} elfos.h svr4.h vxworks.h"
+ case ${enable_threads} in
+ no) ;;
+ "" | yes | vxworks) thread_file='vxworks' ;;
+ *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
+ esac
+ use_collect2=yes
+ xm_defines=POSIX
+ ;;
esac
-case $machine in
+case ${target} in
# Support site-specific machine types.
*local*)
- rest=`echo $machine | sed -e "s/$cpu_type-//"`
+ rest=`echo ${target} | sed -e "s/$cpu_type-//"`
tm_file=${cpu_type}/$rest.h
if test -f $srcdir/config/${cpu_type}/xm-$rest.h
then xm_file=${cpu_type}/xm-$rest.h
# Don't include t-ieee for now because we don't support that yet
# tmake_file="alpha/t-ieee"
tmake_file="alpha/t-unicosmk"
+ use_fixproto=yes
;;
alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
;;
-
alpha*-*-openbsd*)
tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
target_cpu_default="MASK_GAS"
tmake_file="alpha/t-alpha alpha/t-ieee"
;;
-
alpha*-dec-osf[45]*)
if test x$stabs = xyes
then
tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
tm_file="${tm_file} alpha/osf.h"
extra_headers=va_list.h
- case $machine in
+ case ${target} in
*-*-osf4*)
# Set target_cpu_default except on 4.0a.
- case $machine in
+ case ${target} in
*-*-osf4.0a) ;;
*) target_cpu_default=MASK_SUPPORT_ARCH
esac
target_cpu_default=MASK_SUPPORT_ARCH
;;
esac
- case x${enable_threads} in
- x | xyes | xpthreads | xposix)
+ case ${enable_threads} in
+ "" | yes | posix)
thread_file='posix'
tmake_file="${tmake_file} alpha/t-osf-pthread"
;;
arc-*-elf*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
extra_parts="crtinit.o crtfini.o"
+ use_fixproto=yes
;;
arm-*-coff* | armel-*-coff*)
tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
tmake_file=arm/t-semi
;;
+arm-wrs-vxworks)
+ tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
+ tmake_file="${tmake_file} arm/t-vxworks"
+ ;;
arm*-*-freebsd*|strongarm*-*-freebsd*)
tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
tmake_file="${tmake_file} arm/t-strongarm-elf"
use_collect2=yes
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
+ tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
- case x${enable_threads} in
- x | xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
;;
arm*-*-uclinux*) # ARM ucLinux
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
arm*-*-rtems*)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
tmake_file="arm/t-arm-elf t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
arm*-*-elf | ep9312-*-elf)
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
;;
avr-*-*)
tm_file="avr/avr.h dbxelf.h"
+ use_fixproto=yes
;;
c4x-*-rtems* | tic4x-*-rtems*)
tmake_file="c4x/t-c4x t-rtems"
tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
c_target_objs="c4x-c.o"
cxx_target_objs="c4x-c.o"
;;
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
;;
-d30v-*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- ;;
-dsp16xx-*)
- ;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
tmake_file=fr30/t-fr30
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ use_fixproto=yes
;;
frv-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
tmake_file=frv/t-frv
+ use_fixproto=yes
;;
h8300-*-rtems*)
tmake_file="h8300/t-h8300 t-rtems"
tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
h8300-*-elf*)
tmake_file="h8300/t-h8300 h8300/t-elf"
tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
+ use_fixproto=yes
;;
h8300-*-*)
tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
+ use_fixproto=yes
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
target_cpu_default="(MASK_PA_11 | MASK_PA_20)"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
- tmake_file=pa/t-linux64
+ tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux64"
gas=yes gnu_ld=yes
need_64bit_hwint=yes
;;
# port not yet contributed.
#hppa*-*-openbsd*)
# target_cpu_default="MASK_PA_11"
-# tmake_file=pa/t-bsd
# ;;
hppa1.1-*-pro*)
target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
- tmake_file="pa/t-bsd pa/t-pro"
+ tmake_file="pa/t-pro"
;;
hppa1.1-*-osf*)
target_cpu_default="MASK_PA_11"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
- tmake_file="pa/t-bsd pa/t-pa"
+ tmake_file="pa/t-pa"
use_collect2=yes
;;
hppa1.1-*-rtems*)
target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
- tmake_file="pa/t-bsd pa/t-pro t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
+ tmake_file="pa/t-pro t-rtems"
;;
hppa1.1-*-bsd*)
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
target_cpu_default="MASK_PA_11"
- tmake_file="pa/t-bsd pa/t-pa"
+ tmake_file="pa/t-pa"
use_collect2=yes
;;
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
if test x$enable_threads = x; then
enable_threads=$have_pthread_h
;;
esac
use_collect2=yes
+ use_fixproto=yes
;;
hppa1.0-*-hpux10*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
if test x$enable_threads = x; then
enable_threads=$have_pthread_h
;;
esac
use_collect2=yes
+ use_fixproto=yes
;;
hppa*64*-*-hpux11*)
if test x$gas = xyes
then
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
- pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
+ pa/pa64-regs.h pa/pa-hpux.h \
pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
else
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
- pa/pa64-regs.h pa/long_double.h pa/pa-hpux.h \
+ pa/pa64-regs.h pa/pa-hpux.h \
pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
fi
need_64bit_hwint=yes
;;
hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
case x${enable_threads} in
xyes | xposix )
use_collect2=yes
;;
hppa1.0-*-hpux11*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
+ tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
case x${enable_threads} in
xyes | xposix )
i370-*-opened*) # IBM 360/370/390 Architecture
xm_defines='FATAL_EXIT_CODE=12'
tm_file="i370/oe.h i370/i370.h"
- tmake_file="i370/t-oe i370/t-i370"
+ tmake_file="i370/t-i370"
c_target_objs="i370-c.o"
cxx_target_objs="i370-c.o"
+ # Don't bother fixing up header files; they're weird.
;;
i370-*-mvs*)
xm_defines='FATAL_EXIT_CODE=12'
tmake_file="i370/t-i370"
c_target_objs="i370-c.o"
cxx_target_objs="i370-c.o"
+ use_fixproto=yes
;;
i370-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h i370/i370.h"
tmake_file="t-slibgcc-elf-ver t-linux"
# broken_install=yes
- elf=yes
;;
i[34567]86-*-darwin*)
tm_file="${tm_file} i386/darwin.h"
i[34567]86-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
tmake_file="i386/t-i386elf t-svr4"
- ;;
-i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
- xm_defines="SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtpic
- ;;
-i[34567]86-*-netware) # Intel 80386's running netware
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h"
- tmake_file=i386/t-netware
+ use_fixproto=yes
;;
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
if test x$gas = xyes
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
i[34567]86-*-aout*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
+ use_fixproto=yes
;;
i[34567]86-*-beoself* | i[34567]86-*-beos*)
tmake_file='i386/t-beos i386/t-crtpic'
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
extra_parts='crtbegin.o crtend.o'
;;
-i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h"
- tmake_file=t-freebsd
- ;;
i[34567]86-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
;;
;;
i[34567]86-*-coff*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
- ;;
-i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
- # with a.out format
- tmake_file="t-linux-aout i386/t-crtstuff"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h"
- gnu_ld=yes
- ;;
-i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
- # with ELF format using the
- # GNU/Linux C library 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='single'
- fi
+ use_fixproto=yes
;;
i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
# with ELF format using glibc 2
i386/x86-64.h i386/linux64.h"
tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64"
;;
+i[34567]86-*-kfreebsd*-gnu) # must be before i[34567]86-*-gnu*
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h kfreebsdgnu.h i386/kfreebsdgnu.h"
+ tmake_file="t-slibgcc-elf-ver t-kfreebsd-gnu i386/t-crtstuff"
+ float_format=i386
+ use_fixproto=no
+ ;;
i[34567]86-*-gnu*)
;;
i[34567]86-pc-msdosdjgpp*)
gnu_ld=yes
gas=yes
;;
-i[34567]86-moss-msdos* | i[34567]86-*-moss*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h"
- tmake_file=t-libc-ok
- gnu_ld=yes
- gas=yes
- ;;
i[34567]86-*-lynxos*)
if test x$gas = xyes
then
else
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h"
fi
- ;;
-i[34567]86-*-mach*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h"
-# tmake_file=t-libc-ok
- use_collect2=yes
+ use_fixproto=yes
;;
i[34567]86-*-nto-qnx*)
tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
extra_parts="crtbegin.o crtend.o crti.o crtn.o"
tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
fi
tmake_file=i386/t-sco5
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
i[34567]86-*-solaris2*)
xm_defines="SMALL_ARG_MAX"
if test x$enable_threads = xyes; then
thread_file='posix'
fi
+ use_fixproto=yes
;;
i[34567]86-*-sysv4*) # Intel 80386's running system V.4
xm_defines="SMALL_ARG_MAX"
fi
tmake_file="i386/t-crtpic t-svr4"
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
-i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
- tmake_file="i386/t-crtpic i386/t-udk t-svr4"
- extra_parts="crtbegin.o crtend.o"
- ;;
-i[34567]86-*-sysv*) # Intel 80386's running system V
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h"
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.ifile"
- else
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- else
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- tmake_file="$tmake_file i386/t-crtpic"
- ;;
-i386-*-vsta) # Intel 80386's running VSTa kernel
- xm_file="i386/xm-vsta.h"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/vsta.h"
+i[4567]86-wrs-vxworks)
+ tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
+ tmake_file="${tmake_file} i386/t-vxworks"
;;
i[34567]86-*-pe | i[34567]86-*-cygwin*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
if test x$enable_threads = xyes; then
thread_file='win32'
fi
- case $machine in
+ case ${target} in
*mingw32crt*)
tm_file="${tm_file} i386/crtdll.h"
;;
if test x$enable_threads = xyes; then
thread_file='win32'
fi
+ use_fixproto=yes
;;
i[34567]86-*-interix3*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
- tmake_file="t-interix i386/t-interix"
- extra_objs=winnt.o
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- ;;
-i[34567]86-*-interix*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h"
- tmake_file="t-interix i386/t-interix"
+ tmake_file="i386/t-interix"
extra_objs=winnt.o
if test x$enable_threads = xyes ; then
thread_file='posix'
tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h"
tmake_file="i860/t-i860 i860/t-svr4"
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
-i960-*-coff*)
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
- tmake_file=i960/t-960bare
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-*-rtems)
- tmake_file="i960/t-960bare t-rtems"
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-*-*) # Default i960 environment.
- use_collect2=yes
- tmake_file=i960/t-960bare
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
ia64*-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
+ use_fixproto=yes
;;
ia64*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
fi
;;
ia64*-*-hpux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h ia64/hpux_longdouble.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
tmake_file="ia64/t-ia64 ia64/t-hpux"
target_cpu_default="MASK_GNU_AS"
case x$enable_threads in
use_collect2=no
c_target_objs="ia64-c.o"
cxx_target_objs="ia64-c.o"
+ # If we decide to run fixproto we should define FIXPROTO_DEFINES
+ # in ia64/t-hpux, and also fix the definition of putenv in
+ # sys-protos.h (const char not char).
;;
ip2k-*-elf)
tm_file="elfos.h ${tm_file}"
+ use_fixproto=yes
;;
iq2000*-*-elf*)
tm_file="svr4.h elfos.h iq2000/iq2000.h"
tmake_file=iq2000/t-iq2000
out_file=iq2000/iq2000.c
md_file=iq2000/iq2000.md
+ use_fixproto=yes
;;
m32r-*-elf*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
extra_parts="crtinit.o crtfini.o"
+ use_fixproto=yes
+ ;;
+m32rle-*-elf*)
+ tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
+ extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
+ use_fixproto=yes
+ ;;
+m32r-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ tmake_file="m32r/t-linux"
+ gnu_ld=yes
+ use_fixproto=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
;;
+m32rle-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ tmake_file="m32r/t-linux"
+ gnu_ld=yes
+ use_fixproto=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
# m68hc11 and m68hc12 share the same machine description.
m68hc11-*-*|m6811-*-*)
tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
tmake_file="m68hc11/t-m68hc11-gas"
+ use_fixproto=yes
;;
m68hc12-*-*|m6812-*-*)
tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
md_file="m68hc11/m68hc11.md"
out_file="m68hc11/m68hc11.c"
tmake_file="m68hc11/t-m68hc11-gas"
+ use_fixproto=yes
;;
-m68000-hp-hpux*) # HP 9000 series 300
- tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h m68k/hp310.h"
- tm_defines="TARGET_DEFAULT=0" # 68000, no 68881, no bitfield ops
- if test x$gas = xyes
- then
- tm_defines="${tm_defines} DBX_DEBUGGING_INFO=1 USE_GAS"
- fi
- tmake_file=m68k/t-hp320
- use_collect2=yes
- ;;
-m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
- tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h"
- if test x$gas = xyes
- then
- tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS"
- else
- tm_defines="NO_DOT_IN_LABEL NO_BUGS"
- fi
- use_collect2=yes
- ;;
-m68k-hp-hpux*) # HP 9000 series 300
- tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h"
- if test x$gas = xyes
- then
- tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS"
- fi
- use_collect2=yes
- ;;
m68k-*-aout*)
tmake_file=m68k/t-m68kbare
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
tmake_file=m68k/t-m68kbare
tm_defines="MOTOROLA USE_GAS"
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
+ use_fixproto=yes
;;
m68020-*-elf* | m68k-*-elf*)
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
+ tm_defines="MOTOROLA USE_GAS"
tmake_file=m68k/t-m68kelf
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
- case $machine in
+ tm_defines="MOTOROLA USE_GAS"
+ case ${target} in
m68010*)
target_cpu_default="0"
;;
;;
esac
;;
-m68k*-*-netbsd*)
- tm_file="m68k/m68k.h netbsd.h netbsd-aout.h m68k/netbsd.h"
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
- ;;
-m68k*-*-openbsd*)
- # needed to unconfuse gdb
- tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
- tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
- tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
-m68k-*-sysv4*) # Motorola m68k's running system V.4
- tm_file="m68k/m68k.h m68k/sgs.h dbxelf.h elfos.h svr4.h m68k/m68kv4.h"
- tm_defines="MOTOROLA SGS SGS_CMP_ORDER SGS_SWITCH_TABLES"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
+m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc
+ tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
+ tm_defines="MOTOROLA USE_GAS"
+ tmake_file=m68k/t-uclinux
+ use_fixproto=no
;;
m68k-*-linux*) # Motorola m68k's running GNU/Linux
# with ELF format using glibc 2
# aka the GNU/Linux C library 6.
tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
- tm_defines="MOTOROLA USE_GAS LINUX_DEFAULT_ELF"
+ tm_defines="MOTOROLA USE_GAS"
tmake_file="t-slibgcc-elf-ver t-linux"
;;
m68k-*-rtems*)
- tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
+ tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
+ tm_defines="MOTOROLA USE_GAS"
extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
mcore-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
tmake_file=mcore/t-mcore
+ use_fixproto=yes
;;
mcore-*-pe*)
tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
tmake_file=mcore/t-mcore-pe
+ use_fixproto=yes
;;
-mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI
- tm_file="${tm_file} mips/iris5.h"
+mips-sgi-irix6*) # SGI System V.4., IRIX 6
+ tm_file="${tm_file} mips/iris5.h mips/iris6.h"
+ tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
if test x$gas = xyes
then
- tm_file="${tm_file} mips/sdb.h mips/iris5gas.h mips/iris6-o32-gas.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
- fi
- tmake_file=mips/t-iris5-gas
- else
- tm_file="${tm_file} mips/iris6-o32-as.h"
- tmake_file=mips/t-iris5-as
+ tm_file="${tm_file} mips/iris6gas.h"
fi
- tm_file="${tm_file} mips/iris6-o32.h"
- tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
- xm_file=mips/xm-iris5.h
- target_cpu_default="MASK_ABICALLS"
- # mips-tfile doesn't work yet
- # See comment in mips/iris5.h file.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
-mips-sgi-irix6*) # SGI System V.4., IRIX 6
- tm_file="${tm_file} mips/iris5.h mips/iris6.h"
if test "x$gnu_ld" = xyes
then
tm_file="${tm_file} mips/iris6gld.h"
+ tmake_file="$tmake_file mips/t-iris6gld"
fi
- tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
+ # See comment in mips/iris5.h file. Only enabled for O32 ABI
+ # without GNU as.
+ if test x$gas = xno
+ then
+ use_collect2=yes
+ fi
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
+ use_fixproto=yes
;;
mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
tm_file="${tm_file} mips/iris5.h mips/iris6.h mips/cross64.h"
- xm_file=mips/xm-iris5.h
tmake_file="mips/t-iris mips/t-cross64"
target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
+ use_fixproto=yes
;;
mips-sgi-irix5*) # SGI System V.4., IRIX 5
tm_file="${tm_file} mips/iris5.h"
tmake_file=mips/t-iris5-as
fi
tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
- xm_file=mips/xm-iris5.h
target_cpu_default="MASK_ABICALLS"
# mips-tfile doesn't work yet
# See comment in mips/iris5.h file.
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
+ use_fixproto=yes
;;
mips*-*-netbsd*) # NetBSD/mips, either endian.
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
- tmake_file="${tmake_file}"
;;
mips64*-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
gnu_ld=yes
gas=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
;;
mips*-*-linux*) # Linux MIPS, either endian.
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
- case $machine in
+ case ${target} in
mipsisa32*-*)
target_cpu_default="MASK_SOFT_FLOAT"
tm_defines="MIPS_ISA_DEFAULT=32"
tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
- case $machine in
+ case ${target} in
mips*el-*-openbsd*)
tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
*) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
+ use_fixproto=yes
;;
mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
+ use_fixproto=yes
;;
mipsisa64-*-elf* | mipsisa64el-*-elf*)
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-isa3264
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
+ use_fixproto=yes
;;
mipsisa64sr71k-*-elf*)
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-sr71k
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
+ use_fixproto=yes
;;
mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-elf
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
+ use_fixproto=yes
;;
mips-*-elf* | mipsel-*-elf*)
tm_file="${tm_file} mips/elf.h"
tmake_file=mips/t-elf
+ use_fixproto=yes
;;
mips64-*-elf* | mips64el-*-elf*)
tm_file="${tm_file} mips/elf64.h"
tmake_file=mips/t-elf
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
+ use_fixproto=yes
;;
mips64vr-*-elf* | mips64vrel-*-elf*)
tm_file="mips/vr.h ${tm_file} mips/elf64.h"
tm_defines="MIPS_ABI_DEFAULT=ABI_O64 MIPS_MARCH_CONTROLS_SOFT_FLOAT=1"
tmake_file=mips/t-vr
+ use_fixproto=yes
;;
mips64orion-*-elf* | mips64orionel-*-elf*)
tm_file="${tm_file} mips/elforion.h mips/elf64.h"
tmake_file=mips/t-elf
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
+ use_fixproto=yes
;;
mips*-*-rtems*)
tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
- tmake_file="mips/t-elf t-rtems"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
+ tmake_file="mips/t-elf t-rtems mips/t-rtems"
+ ;;
+mips-wrs-vxworks)
+ # We want vxworks.h after mips/elf.h, which unfortunately means we
+ # have to redo the tm_file list from scratch.
+ tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
+ tmake_file="${tmake_file} mips/t-vxworks"
+ target_cpu_default="MASK_GAS"
+ ;;
+mips-wrs-windiss) # Instruction-level simulator for VxWorks.
+ xm_defines=POSIX
+ tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
+ tmake_file="${tmake_file} mips/t-elf"
+ target_cpu_default="MASK_GAS"
+ thread_file=
;;
mipstx39-*-elf* | mipstx39el-*-elf*)
tm_file="${tm_file} mips/r3900.h mips/elf.h"
tmake_file=mips/t-r3900
+ use_fixproto=yes
;;
mmix-knuth-mmixware)
need_64bit_hwint=yes
tm_file="${tm_file} dbx.h"
fi
use_collect2=no
+ use_fixproto=yes
;;
ns32k-*-netbsdelf*)
- echo "GCC does not yet support the ${machine} target"; exit 1
+ echo "GCC does not yet support the ${target} target"; exit 1
;;
ns32k-*-netbsd*)
tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
;;
pdp11-*-bsd)
tm_file="${tm_file} pdp11/2bsd.h"
+ use_fixproto=yes
;;
pdp11-*-*)
+ use_fixproto=yes
;;
avr-*-*)
+ use_fixproto=yes
;;
# port not yet contributed
#powerpc-*-openbsd*)
tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
tmake_file="rs6000/t-fprules rs6000/t-beos"
extra_headers=
+ use_fixproto=yes
;;
powerpc-*-darwin*)
tm_file="${tm_file} rs6000/darwin.h"
- tmake_file="t-darwin rs6000/t-darwin"
+ tmake_file="t-darwin t-slibgcc-darwin rs6000/t-darwin"
extra_headers=altivec.h
- # override ppc default
- need_64bit_hwint=
;;
powerpc*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
powerpc-*-chorusos*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
+ case ${enable_threads} in
+ yes | posix)
+ thread_file='posix'
+ ;;
esac
+ use_fixproto=yes
;;
powerpc-*-eabispe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
powerpc-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ use_fixproto=yes
;;
powerpc-*-eabialtivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
powerpc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
tmake_file="rs6000/t-fprules t-rtems rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
powerpc-*-linux*altivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
extra_headers=ppc-asm.h
;;
-powerpc-wrs-windiss*)
+powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
thread_file=""
+ use_fixproto=yes
;;
powerpcle-*-sysv*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
+ use_fixproto=yes
;;
powerpcle-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
+ use_fixproto=yes
;;
powerpcle-*-eabisim*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
tmake_file="rs6000/t-fprules rs6000/t-newas"
use_collect2=yes
extra_headers=
+ use_fixproto=yes
;;
rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
tm_file="svr3.h lynx.h rs6000/lynxbase.h rs6000/rs6000.h rs6000/lynx.h"
tmake_file=rs6000/t-fprules
use_collect2=yes
+ use_fixproto=yes
;;
s390-*-linux*)
tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
out_file=s390/s390.c
tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64"
;;
+s390x-ibm-tpf*)
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
+ tm_p_file=s390/s390-protos.h
+ md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ out_file=s390/s390.c
+ tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
+ ;;
sh-*-elf* | sh[2346l]*-*-elf* | sh*-*-kaos*)
tmake_file="sh/t-sh sh/t-elf"
- case $machine in
- shl* | sh64l*)
+ case ${target} in
+ shl* | sh[234]l* | sh64l*)
tm_file="sh/little.h ${tm_file}"
tmake_file="${tmake_file} sh/t-le"
;;
esac
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h"
- case $machine in
+ case ${target} in
sh64*)
tmake_file="${tmake_file} sh/t-sh64"
tm_file="${tm_file} sh/sh64.h"
sh2e*) target_cpu_default="SELECT_SH2E" ;;
sh2*) target_cpu_default="SELECT_SH2" ;;
esac
- case $machine in
+ case ${target} in
sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
esac
- case $machine in
+ case ${target} in
sh*-*-kaos*) tm_file="${tm_file} kaos.h sh/kaos-sh.h" ;;
esac
+ use_fixproto=yes
;;
sh-*-rtemself*)
tmake_file="sh/t-sh sh/t-elf t-rtems"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
sh-*-rtems*)
tmake_file="sh/t-sh t-rtems"
tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
sh-*-linux* | sh[2346lbe]*-*-linux*)
tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux"
- case $machine in
+ case ${target} in
sh*be-*-* | sh*eb-*-*) ;;
*)
tm_file="sh/little.h ${tm_file}"
esac
tmake_file="${tmake_file} sh/t-linux"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
- case $machine in
+ case ${target} in
sh64*)
tmake_file="${tmake_file} sh/t-sh64"
tm_file="${tm_file} sh/sh64.h"
sh2e*) target_cpu_default="SELECT_SH2E" ;;
sh2*) target_cpu_default="SELECT_SH2" ;;
esac
- case $machine in
+ case ${target} in
sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
esac
;;
sh64-*-netbsd* | sh64l*-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
tmake_file="${tmake_file} sh/t-sh sh/t-elf"
- case $machine in
+ case ${target} in
sh*l*-*)
tm_file="sh/little.h ${tm_file}"
tmake_file="${tmake_file} sh/t-le"
tmake_file="${tmake_file} sh/t-be"
;;
esac
- case $machine in
+ case ${target} in
sh5*-*)
# SHmedia, 32-bit ABI
target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT"
;;
esac
;;
+sh-wrs-vxworks)
+ tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
+ ;;
sh-*-*)
tm_file="${tm_file} dbxcoff.h sh/coff.h"
+ use_fixproto=yes
;;
sparc-tti-*)
tm_file="${tm_file} sparc/pbd.h"
+ use_fixproto=yes
;;
sparc-*-netbsdelf*)
tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
use_collect2=yes
;;
sparc64-*-openbsd*)
- tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
+ tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
gas=yes gnu_ld=yes
with_cpu=ultrasparc
;;
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
tmake_file="sparc/t-elf sparc/t-crtfm"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ use_fixproto=yes
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='rtems'
- fi
;;
sparc64-*-solaris2* | sparcv9-*-solaris2*)
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
- case $machine in
+ case ${target} in
*-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
if test x$gnu_ld = xno; then
tm_file="${tm_file} sparc/sol26-sld.h"
fi
;;
- *-*-solaris2.[789])
+ *-*-solaris2.[789] | *-*-solaris2.1[0-9])
tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
if test x$gnu_ld = xyes; then
tm_file="${tm_file} sparc/sol2-gld-bi.h"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
tmake_file=t-svr4
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
sparclite-*-coff*)
- tm_file="${tm_file} gofast.h sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
+ tm_file="${tm_file} sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
tmake_file=sparc/t-sparclite
;;
sparclite-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/liteelf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/liteelf.h"
tmake_file="sparc/t-sparclite sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
sparc86x-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h gofast.h sparc/sp86x-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/sp86x-elf.h"
tmake_file="sparc/t-sp86x sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
sparc64-*-aout*)
tm_file="sparc/sparc.h sparc/aout.h sparc/sp64-aout.h"
+ use_fixproto=yes
;;
sparc64-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
tmake_file="${tmake_file} sparc/t-crtfm"
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
+ use_fixproto=yes
;;
strongarm-*-pe)
tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
extra_objs=pe.o
+ use_fixproto=yes
;;
strongarm-*-kaos*)
tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
;;
+v850e1-*-*)
+ target_cpu_default="TARGET_CPU_v850e1"
+ tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
+ tm_p_file=v850/v850-protos.h
+ tmake_file=v850/t-v850e
+ md_file=v850/v850.md
+ out_file=v850/v850.c
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ c_target_objs="v850-c.o"
+ cxx_target_objs="v850-c.o"
+ use_fixproto=yes
+ ;;
v850e-*-*)
target_cpu_default="TARGET_CPU_v850e"
tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
tm_p_file=v850/v850-protos.h
- tmake_file=v850/t-v850
+ tmake_file=v850/t-v850e
md_file=v850/v850.md
out_file=v850/v850.c
if test x$stabs = xyes
use_collect2=no
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
+ use_fixproto=yes
;;
v850-*-*)
target_cpu_default="TARGET_CPU_generic"
use_collect2=no
c_target_objs="v850-c.o"
cxx_target_objs="v850-c.o"
+ use_fixproto=yes
;;
vax-*-bsd*) # VAXen running BSD
tm_file="${tm_file} vax/bsd.h"
use_collect2=yes
+ use_fixproto=yes
;;
vax-*-sysv*) # VAXen running system V
tm_file="${tm_file} vax/vaxv.h"
+ use_fixproto=yes
;;
vax-*-netbsdelf*)
tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
;;
vax-*-ultrix*) # VAXen running ultrix
tm_file="${tm_file} vax/ultrix.h"
- ;;
-vax-*-vms*) # VAXen running VMS
- echo "Configuration $machine no longer supported" 1>&2
- exit 1
- ;;
-vax-*-*) # VAX default entry
+ use_fixproto=yes
;;
xscale-*-elf)
tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
+ use_fixproto=yes
;;
xscale-*-coff)
tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
out_file=arm/arm.c
md_file=arm/arm.md
extra_modes=arm/arm-modes.def
+ use_fixproto=yes
;;
xstormy16-*-elf)
# For historical reasons, the target files omit the 'x'.
out_file=stormy16/stormy16.c
tmake_file="stormy16/t-stormy16"
extra_parts="crtbegin.o crtend.o"
+ use_fixproto=yes
;;
xtensa-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
;;
am33_2.0-*-linux*)
tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
- tmake_file="t-linux mn10300/t-linux"
+ tmake_file="t-slibgcc-elf-ver t-linux mn10300/t-linux"
gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
use_collect2=no
;;
*)
- echo "*** Configuration $machine not supported" 1>&2
+ echo "*** Configuration ${target} not supported" 1>&2
exit 1
;;
esac
# Support for --with-cpu and related options (and a few unrelated options,
# too).
- case "x$with_cpu" in
- xyes | xno)
- echo "--with-cpu must be passed a value" 1>&2
- exit 1
- ;;
- esac
+case ${with_cpu} in
+ yes | no)
+ echo "--with-cpu must be passed a value" 1>&2
+ exit 1
+ ;;
+esac
- # If there is no $with_cpu option, try to infer one from ${machine}.
- # This block sets nothing except for with_cpu.
- if test x$with_cpu = x
- then
- case $machine in
- ep9312-*-*)
- # A Cirrus ARM variant.
- with_cpu="ep9312"
- ;;
- i486-*-*)
- with_cpu=i486
- ;;
- i586-*-*)
- case $target_alias in
- k6_2-*)
- with_cpu=k6-2
- ;;
- k6_3-*)
- with_cpu=k6-3
- ;;
- k6-*)
- with_cpu=k6
- ;;
- pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
- with_cpu=pentium-mmx
- ;;
- *)
- with_cpu=pentium
- ;;
- esac
- ;;
- i686-*-* | i786-*-*)
- case $target_alias in
- k8-*)
- with_cpu=k8
- ;;
- athlon_xp-*|athlon_mp-*|athlon_4-*)
- with_cpu=athlon-4
- ;;
- athlon_tbird-*|athlon-*)
- with_cpu=athlon
- ;;
- pentium2-*)
- with_cpu=pentium2
- ;;
- pentium3-*)
- with_cpu=pentium3
- ;;
- pentium4-*)
- with_cpu=pentium4
- ;;
- *)
- with_cpu=pentiumpro
- ;;
- esac
- ;;
- x86_64-*-*)
- with_cpu=k8
- ;;
- alpha*-*-*)
- case $machine in
- alphaev6[78]*)
- with_cpu=ev67
- ;;
- alphaev6*)
- with_cpu=ev6
- ;;
- alphapca56*)
- with_cpu=pca56
- ;;
- alphaev56*)
- with_cpu=ev56
- ;;
- alphaev5*)
- with_cpu=ev5
- ;;
- esac
- ;;
- sparc*-*-*)
- with_cpu="`echo $machine | sed 's/-.*$//'`"
- if [ x$with_cpu = xsparc64 ]; then
- with_cpu=v9
- fi
- ;;
- esac
- fi
+# If there is no $with_cpu option, try to infer one from ${target}.
+# This block sets nothing except for with_cpu.
+if test x$with_cpu = x ; then
+ case ${target} in
+ ep9312-*-*)
+ # A Cirrus ARM variant.
+ with_cpu="ep9312"
+ ;;
+ i486-*-*)
+ with_cpu=i486
+ ;;
+ i586-*-*)
+ case ${target_noncanonical} in
+ k6_2-*)
+ with_cpu=k6-2
+ ;;
+ k6_3-*)
+ with_cpu=k6-3
+ ;;
+ k6-*)
+ with_cpu=k6
+ ;;
+ pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
+ with_cpu=pentium-mmx
+ ;;
+ *)
+ with_cpu=pentium
+ ;;
+ esac
+ ;;
+ i686-*-* | i786-*-*)
+ case ${target_noncanonical} in
+ k8-*|opteron-*|athlon_64-*)
+ with_cpu=k8
+ ;;
+ athlon_xp-*|athlon_mp-*|athlon_4-*)
+ with_cpu=athlon-4
+ ;;
+ athlon_tbird-*|athlon-*)
+ with_cpu=athlon
+ ;;
+ pentium2-*)
+ with_cpu=pentium2
+ ;;
+ pentium3-*)
+ with_cpu=pentium3
+ ;;
+ pentium4-*)
+ with_cpu=pentium4
+ ;;
+ *)
+ with_cpu=pentiumpro
+ ;;
+ esac
+ ;;
+ x86_64-*-*)
+ with_cpu=k8
+ ;;
+ alphaev6[78]*-*-*)
+ with_cpu=ev67
+ ;;
+ alphaev6*-*-*)
+ with_cpu=ev6
+ ;;
+ alphapca56*-*-*)
+ with_cpu=pca56
+ ;;
+ alphaev56*-*-*)
+ with_cpu=ev56
+ ;;
+ alphaev5*-*-*)
+ with_cpu=ev5
+ ;;
+ sparc*-*-*)
+ with_cpu="`echo ${target} | sed 's/-.*$//'`"
+ if [ x$with_cpu = xsparc64 ]; then
+ with_cpu=v9
+ fi
+ ;;
+ esac
+fi
# Similarly for --with-schedule.
if test x$with_schedule = x; then
- case $machine in
+ case ${target} in
hppa1* | parisc1*)
# Override default PA8000 scheduling model.
with_schedule=7100LC
# supported_defaults.
supported_defaults=
- case "$machine" in
+ case "${target}" in
alpha*-*-*)
supported_defaults="cpu tune"
for which in cpu tune; do
eval "val=\$with_$which"
- case "x$val" in
- x \
- | xev4 | xev45 | x21064 | xev5 | x21164 | xev56 | x21164a \
- | xpca56 | x21164PC | x21164pc | xev6 | x21264 | xev67 \
- | x21264a)
+ case "$val" in
+ "" \
+ | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
+ | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
+ | 21264a)
;;
*)
echo "Unknown CPU used in --with-$which=$val" 1>&2
;;
arm*-*-*)
- supported_defaults="arch cpu float tune"
+ supported_defaults="arch cpu float tune fpu"
for which in cpu tune; do
eval "val=\$with_$which"
- case "x$val" in
- x \
- | xarm[236789] | xarm250 | xarm[67][01]0 \
- | xarm60 | xarm620 | xarm7d | xarm7di \
- | xarm7m | xarm7dm | xarm7dmi | xarm[79]tdmi \
- | xarm70 | xarm700i | xarm710t | xarm720 \
- | xarm720t | xarm740t | xarm710c | xarm920 \
- | xarm920t | xarm940t | xarm9e | xarm10tdmi \
- | xarm7100 | xarm7500 | xarm7500fe | xarm810 \
- | xarm1020t \
- | xxscale | xiwmmxt \
- | xep9312 \
- | xstrongarm | xstrongarm110 | xstrongarm11[01]0)
+ case "$val" in
+ "" \
+ | arm[236789] | arm250 | arm[67][01]0 \
+ | arm60 | arm620 | arm7d | arm7di \
+ | arm7m | arm7dm | arm7dmi | arm[79]tdmi \
+ | arm70 | arm700i | arm710t | arm720 \
+ | arm720t | arm740t | arm710c | arm920 \
+ | arm920t | arm926ejs | arm940t | arm9e | arm10tdmi \
+ | arm7100 | arm7500 | arm7500fe | arm810 \
+ | arm1026ejs | arm1020t | arm1136js | arm1136jfs \
+ | xscale | iwmmxt \
+ | ep9312 \
+ | strongarm | strongarm110 | strongarm11[01]0)
# OK
;;
*)
esac
done
- case "x$with_arch" in
- x \
- | xarmv[2345] | xarmv2a | xarmv3m | xarmv4t | xarmv5t \
- | xarmv5te | ep9312)
+ case "$with_arch" in
+ "" \
+ | armv[23456] | armv2a | armv3m | armv4t | armv5t \
+ | armv5te | armv6j | ep9312)
# OK
;;
*)
;;
esac
- case "x$with_float" in
- x \
- | xsoft | xhard)
+ case "$with_float" in
+ "" \
+ | soft | hard | softfp)
# OK
;;
*)
;;
esac
+ case "$with_fpu" in
+ "" \
+ | fpa | fpe2 | fpe3 | maverick | vfp )
+ # OK
+ ;;
+ *)
+ echo "Unknown fpu used in --with-fpu=$fpu" 2>&1
+ exit 1
+ ;;
+ esac
+
if test "x$with_arch" != x && test "x$with_cpu" != x; then
echo "Warning: --with-arch overrides --with-cpu" 1>&2
fi
hppa*-*-* | parisc*-*-*)
supported_defaults="arch schedule"
- case "x$with_arch" in
- x | x1.0 | x1.1 | x2.0)
+ case "$with_arch" in
+ "" | 1.0 | 1.1 | 2.0)
# OK
;;
*)
;;
esac
- case "x$with_schedule" in
- x | x700 | x7100 | x7100LC | x7200 | x7300 | x8000)
+ case "$with_schedule" in
+ "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
# OK
;;
*)
supported_defaults="arch cpu tune"
for which in arch cpu tune; do
eval "val=\$with_$which"
- case "x$val" in
- x \
- | xi386 | xi486 \
- | xi586 | xpentium | xpentium-mmx | xwinchip-c6 | xwinchip2 \
- | xc3 | xc3-2 | xi686 | xpentiumpro | xpentium2 | xpentium3 \
- | xpentium4 | xk6 | xk6-2 | xk6-3 | xathlon | xathlon-tbird \
- | xathlon-4 | xathlon-xp | xathlon-mp | xk8)
+ case ${val} in
+ "" | i386 | i486 \
+ | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
+ | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
+ | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
+ | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
+ | athlon64 | athlon-fx)
# OK
;;
*)
mips*-*-*)
supported_defaults="abi arch float tune"
- case "x$with_float" in
- x \
- | xsoft | xhard)
+ case ${with_float} in
+ "" | soft | hard)
# OK
;;
*)
;;
esac
- case "x$with_abi" in
- x \
- | x32 | xo64 | xn32 | x64 | xeabi)
+ case ${with_abi} in
+ "" | 32 | o64 | n32 | 64 | eabi)
# OK
;;
*)
for which in cpu tune; do
eval "val=\$with_$which"
- case "x$val" in
- x \
- | xdefault32 | xdefault64 \
- | xcommon \
- | xpower | xpower2 | xpower3 | xpower4 \
- | xpowerpc | xpowerpc64 \
- | xrios | xrios1 | xrios2 | xrsc | xrsc1 | xrs64a \
- | x401 | x403 | x405 | x405fp | x440 | x440fp | x505 \
- | x601 | x602 | x603 | x603e | xec603e | x604 \
- | x604e | x620 | x630 | x740 | x750 | x7400 | x7450 \
- | x8540 | x801 | x821 | x823 | x860 | x970)
+ case ${val} in
+ default32 | default64)
+ with_which="with_$which"
+ eval $with_which=
+ ;;
+ "" | common \
+ | power | power2 | power3 | power4 \
+ | powerpc | powerpc64 \
+ | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
+ | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
+ | 601 | 602 | 603 | 603e | ec603e | 604 \
+ | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
+ | 8540 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
# OK
;;
*)
for which in arch tune; do
eval "val=\$with_$which"
- case x$val in
- x \
- | xg5 | xg6 | xz900 | xz990)
+ case ${val} in
+ "" | g5 | g6 | z900 | z990)
# OK
;;
*)
esac
done
- case "x$with_mode" in
- x \
- | xesa | xzarch)
+ case ${with_mode} in
+ "" | esa | zarch)
# OK
;;
*)
for which in cpu tune; do
eval "val=\$with_$which"
- case x$val in
- x \
- | xsparc | xsparcv9 | xsparc64 | xsparc86x \
- | xv7 | xcypress | xv8 | xsupersparc | xsparclite | xf930 \
- | xf934 | xhypersparc | xsparclite86x | xsparclet | tsc701 \
- | xv9 | xultrasparc | xultrasparc3)
+ case ${val} in
+ "" | sparc | sparcv9 | sparc64 | sparc86x \
+ | v7 | cypress | v8 | supersparc | sparclite | f930 \
+ | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
+ | v9 | ultrasparc | ultrasparc3)
# OK
;;
*)
esac
done
- case "x$with_float" in
- x \
- | xsoft | xhard)
+ case ${with_float} in
+ "" | soft | hard)
# OK
;;
*)
v850*-*-*)
supported_defaults=cpu
- case "x$with_cpu" in
- x | xv850e)
+ case ${with_cpu} in
+ "" | v850e | v850e1)
# OK
;;
*)
# Set some miscellaneous flags for particular targets.
target_cpu_default2=
- case $machine in
+ case ${target} in
alpha*-*-*)
if test x$gas = xyes
then
;;
mips*-*-*)
- case $machine in
+ case ${target} in
mips*-*-ecoff* | mips*-*-elf*)
if test x$gas = xyes
then
fi
;;
esac
- case $machine in
+ case ${target} in
mips*el-*-*)
tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
;;
esac
if test "x$enable_gofast" = xyes
then
- tm_defines="INIT_SUBTARGET_OPTABS=INIT_GOFAST_OPTABS $tm_defines"
- tm_file="gofast.h $tm_file"
+ tm_defines="US_SOFTWARE_GOFAST $tm_defines"
tmake_file="mips/t-gofast $tmake_file"
else
tmake_file="mips/t-mips $tmake_file"
esac
t=
- all_defaults="abi cpu arch tune schedule float mode"
+ all_defaults="abi cpu arch tune schedule float mode fpu"
for option in $all_defaults
do
eval "val=\$with_$option"