OSDN Git Service

* config/microblaze/microblaze.h (CC1_SPEC): Remove %{save-temps: }.
[pf3gnuchains/gcc-fork.git] / gcc / config.gcc
index 31ea32e..0f6aae1 100644 (file)
@@ -1,6 +1,6 @@
 # GCC target-specific configuration file.
 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-# 2008, 2009, 2010 Free Software Foundation, Inc.
+# 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 
 #This file is part of GCC.
 
 #                      default value of $default_use_cxa_atexit is set to
 #                      "no" except for targets which are known to be OK.
 #
+#  default_gnu_indirect_function
+#                       The default value for the $enable_gnu_indirect_function
+#                       variable.  enable_gnu_indirect_function relies
+#                      upon the presence of a non-standard gnu ifunc support
+#                      in the assembler, linker and dynamic linker.
+#                      Since not all libraries provide the dynamic linking
+#                      support, the default value of
+#                      $default_gnu_indirect_function is set to
+#                      "no" except for targets which are known to be OK.
+#
 #  gas_flag            Either yes or no depending on whether GNU as was
 #                      requested.
 #
@@ -62,7 +72,7 @@
 #  tm_file             A list of target macro files, if different from
 #                      "$cpu_type/$cpu_type.h". Usually it's constructed
 #                      per target in a way like this:
-#                      tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
+#                      tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
 #                      Note that the preferred order is:
 #                      - specific target header "${cpu_type}/${cpu_type.h}"
 #                      - generic headers like dbxelf.h elfos.h, etc.
 #  extra_headers       List of used header files from the directory
 #                      config/${cpu_type}.
 #
+#  user_headers_inc_next_pre
+#                      List of header file names of internal gcc header
+#                      files, which should be prefixed by an include_next.
+#  user_headers_inc_next_post
+#                      List of header file names of internal gcc header
+#                      files, which should be postfixed by an include_next.
 #  use_gcc_tgmath      If set, add tgmath.h to the list of used header
 #                      files.
 #
 out_file=
 tmake_file=
 extra_headers=
+user_headers_inc_next_pre=
+user_headers_inc_next_post=
 use_gcc_tgmath=yes
 use_gcc_stdint=none
 extra_passes=
@@ -197,11 +215,10 @@ thread_file=
 gas="$gas_flag"
 gnu_ld="$gnu_ld_flag"
 default_use_cxa_atexit=no
+default_gnu_indirect_function=no
 target_gtfiles=
 need_64bit_hwint=
 need_64bit_isa=
-# Selects the object file format reader/writer used by LTO.
-lto_binary_reader=lto-elf
 
 # Don't carry these over build->host->target.  Please.
 xm_file=
@@ -259,6 +276,7 @@ m32c*-*-*)
 alpha*-*-*)
        cpu_type=alpha
        need_64bit_hwint=yes
+       extra_options="${extra_options} g.opt"
        ;;
 am33_2.0-*-linux*)
        cpu_type=mn10300
@@ -281,6 +299,7 @@ crisv32-*)
        cpu_type=cris
        ;;
 frv*)  cpu_type=frv
+       extra_options="${extra_options} g.opt"
        ;;
 moxie*)        cpu_type=moxie
        ;;
@@ -292,42 +311,54 @@ i[34567]86-*-*)
        cpu_type=i386
        c_target_objs="i386-c.o"
        cxx_target_objs="i386-c.o"
+       extra_options="${extra_options} fused-madd.opt"
        extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
                       pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
                       nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
                       immintrin.h x86intrin.h avxintrin.h xopintrin.h
                       ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
-                      abmintrin.h"
+                      abmintrin.h bmiintrin.h tbmintrin.h"
        ;;
 x86_64-*-*)
        cpu_type=i386
        c_target_objs="i386-c.o"
        cxx_target_objs="i386-c.o"
+       extra_options="${extra_options} fused-madd.opt"
        extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
                       pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
                       nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
                       immintrin.h x86intrin.h avxintrin.h xopintrin.h
                       ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
-                      abmintrin.h"
+                      abmintrin.h bmiintrin.h tbmintrin.h"
        need_64bit_hwint=yes
        ;;
 ia64-*-*)
        extra_headers=ia64intrin.h
        need_64bit_hwint=yes
+       extra_options="${extra_options} g.opt fused-madd.opt"
        ;;
 hppa*-*-*)
        cpu_type=pa
        ;;
+lm32*)
+       extra_options="${extra_options} g.opt"
+       ;;
 m32r*-*-*)
         cpu_type=m32r
+       extra_options="${extra_options} g.opt"
         ;;
 m68k-*-*)
        extra_headers=math-68881.h
        ;;
+microblaze*-*-*)
+        cpu_type=microblaze
+       extra_options="${extra_options} g.opt"
+        ;;
 mips*-*-*)
        cpu_type=mips
        need_64bit_hwint=yes
        extra_headers="loongson.h"
+       extra_options="${extra_options} g.opt"
        ;;
 picochip-*-*)
         cpu_type=picochip
@@ -341,12 +372,15 @@ powerpc*-*-*)
                cpu_is_64bit=yes
                ;;
        esac
+       extra_options="${extra_options} g.opt fused-madd.opt"
        ;;
 rs6000*-*-*)
        need_64bit_hwint=yes
+       extra_options="${extra_options} g.opt fused-madd.opt"
        ;;
 score*-*-*)
        cpu_type=score
+       extra_options="${extra_options} g.opt"
        ;;
 sparc*-*-*)
        cpu_type=sparc
@@ -359,12 +393,16 @@ spu*-*-*)
 s390*-*-*)
        cpu_type=s390
        need_64bit_hwint=yes
+       extra_options="${extra_options} fused-madd.opt"
        ;;
 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 sh[123456789lbe]*-*-* | sh-*-*)
        cpu_type=sh
        need_64bit_hwint=yes
        ;;
+xtensa*-*-*)
+       extra_options="${extra_options} fused-madd.opt"
+       ;;
 esac
 
 tm_file=${cpu_type}/${cpu_type}.h
@@ -387,6 +425,9 @@ i[34567]86-*-*)
        if test "x$enable_cld" = xyes; then
                tm_defines="${tm_defines} USE_IX86_CLD=1"
        fi
+       if test "x$enable_frame_pointer" = xyes; then
+               tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
+       fi
        tm_file="vxworks-dummy.h ${tm_file}"
        ;;
 x86_64-*-*)
@@ -394,6 +435,9 @@ x86_64-*-*)
        if test "x$enable_cld" = xyes; then
                tm_defines="${tm_defines} USE_IX86_CLD=1"
        fi
+       if test "x$enable_frame_pointer" = xyes; then
+               tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
+       fi
        tm_file="vxworks-dummy.h ${tm_file}"
        ;;
 esac
@@ -405,6 +449,9 @@ case ${target} in
        ;;
 esac
 
+# Common C libraries.
+tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
+
 # Common parts for widely ported systems.
 case ${target} in
 *-*-darwin*)
@@ -485,6 +532,7 @@ case ${target} in
       ;;
   esac
   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
+  extra_options="$extra_options rpath.opt freebsd.opt"
   case ${target} in
     *-*-freebsd[345].*)
       :;;
@@ -508,15 +556,13 @@ case ${target} in
     *-*-gnu*)
       tmake_file="$tmake_file t-gnu";;
   esac
-  # Common C libraries.
-  tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
   # glibc / uclibc / bionic switch.
   # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
   case $target in
     *linux*)
       extra_options="$extra_options linux.opt";;
     *)
-      tm_defines="$tm_defines OPTION_GLIBC=1";;
+      tm_defines="$tm_defines SINGLE_LIBC";;
   esac
   case $target in
     *-*-*android*)
@@ -607,10 +653,15 @@ case ${target} in
   case ${enable_threads} in
     yes) thread_file='rtems' ;;
   esac
+  extra_options="${extra_options} rtems.opt"
   use_gcc_stdint=wrap
   ;;
 *-*-uclinux*)
   use_gcc_stdint=wrap
+  tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
+  ;;
+*-*-solaris2*)
+  extra_options="${extra_options} sol2.opt"
   ;;
 *-*-vxworks*)
   tmake_file=t-vxworks
@@ -660,12 +711,14 @@ alpha*-*-freebsd*)
        ;;
 alpha*-*-netbsd*)
        tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        target_cpu_default="MASK_GAS"
        tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
        ;;
 alpha*-*-openbsd*)
        tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
        tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
+       extra_options="${extra_options} openbsd.opt"
        # default x-alpha is only appropriate for dec-osf.
        target_cpu_default="MASK_GAS"
        tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
@@ -683,6 +736,7 @@ alpha*-dec-osf5.1*)
        tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
        tm_file="${tm_file} alpha/osf5.h"
        tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
+       extra_options="${extra_options} rpath.opt"
        extra_headers=va_list.h
        use_gcc_stdint=provide
        case ${enable_threads} in
@@ -695,7 +749,7 @@ alpha*-dec-osf5.1*)
 alpha64-dec-*vms*)
        tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
        xm_file="alpha/xm-vms.h vms/xm-vms64.h"
-       tmake_file="alpha/t-alpha vms/t-vms vms/t-vms64 alpha/t-vms alpha/t-ieee"
+       tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
        xmake_file=vms/x-vms
        exeext=.exe
        install_headers_dir=install-headers-cp
@@ -711,7 +765,7 @@ alpha*-dec-*vms*)
        extra_options="${extra_options} vms/vms.opt"
        ;;
 arc-*-elf*)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
        extra_parts="crtinit.o crtfini.o"
        ;;
 arm-wrs-vxworks)
@@ -724,16 +778,18 @@ arm*-*-freebsd*)
        ;;
 arm*-*-netbsdelf*)
        tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
        ;;
 arm*-*-netbsd*)
        tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
+       extra_options="${extra_options} netbsd.opt"
        tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
        extra_parts=""
        use_collect2=yes
        ;;
 arm*-*-linux*)                 # ARM GNU/Linux with ELF
-       tm_file="dbxelf.h elfos.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+       tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
        case $target in
        arm*b-*)
                tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
@@ -743,6 +799,7 @@ arm*-*-linux*)                      # ARM GNU/Linux with ELF
        case ${target} in
        arm*-*-linux-*eabi)
            tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
+           tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
            tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
            # Define multilib configuration for arm-linux-androideabi.
            case ${target} in
@@ -770,6 +827,7 @@ arm*-*-uclinux*)            # ARM ucLinux
        case ${target} in
        arm*-*-uclinux*eabi)
            tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
+           tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
            tmake_file="$tmake_file arm/t-bpabi"
            # The BPABI long long divmod functions return a 128-bit value in
            # registers r0-r3.  Correctly modeling that requires the use of
@@ -793,6 +851,7 @@ arm*-*-eabi* | arm*-*-symbianelf* )
        need_64bit_hwint=yes
        default_use_cxa_atexit=yes
        tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
+       tm_file="$tm_file ../../libgcc/config/arm/bpabi-lib.h"
        tmake_file="arm/t-arm arm/t-arm-elf"
        case ${target} in
        arm*-*-eabi*)
@@ -851,20 +910,18 @@ bfin*-elf*)
        use_collect2=no
        ;;
 bfin*-uclinux*)
-       tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
+       tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
        tmake_file=bfin/t-bfin-uclinux
-       tm_defines="${tm_defines} DEFAULT_LIBC=LIBC_UCLIBC"
-       extra_options="${extra_options} linux.opt"
        use_collect2=no
        ;;
 bfin*-linux-uclibc*)
-       tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
+       tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
        tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        use_collect2=no
        ;;
 bfin*-rtems*)
-       tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
+       tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
        tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
        ;;
 bfin*-*)
@@ -889,7 +946,7 @@ cris-*-elf | cris-*-none)
        use_gcc_stdint=wrap
        ;;
 crisv32-*-linux* | cris-*-linux*)
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
+       tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
        # We need to avoid using t-linux, so override default tmake_file
        tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
        extra_options="${extra_options} cris/linux.opt"
@@ -908,34 +965,38 @@ crx-*-elf)
        use_collect2=no
        ;;
 fr30-*-elf)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
        tmake_file=fr30/t-fr30
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        ;;
 frv-*-elf)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} frv/frv-abi.h"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+       tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
        tmake_file=frv/t-frv
        ;;
 frv-*-*linux*)
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
-                linux.h glibc-stdint.h frv/linux.h frv/frv-abi.h"
+       tm_file="dbxelf.h elfos.h ${tm_file} \
+                gnu-user.h linux.h glibc-stdint.h frv/linux.h"
+       tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
        tmake_file="${tmake_file} frv/t-frv frv/t-linux"
        ;;
 moxie-*-elf)
        gas=yes
        gnu_ld=yes
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h ${tm_file}"
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
        ;;
 moxie-*-uclinux*)
        gas=yes
        gnu_ld=yes
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
+       tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
        extra_parts="crti.o crtn.o crtbegin.o crtend.o"
        tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
-       tm_defines="${tm_defines} DEFAULT_LIBC=LIBC_UCLIBC"
-       extra_options="${extra_options} linux.opt"
+       ;;
+moxie-*-rtems*)
+       tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp t-rtems"
+       tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
        ;;
 h8300-*-rtems*)
        tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
@@ -947,7 +1008,7 @@ h8300-*-elf*)
        ;;
 hppa*64*-*-linux*)
        target_cpu_default="MASK_PA_11|MASK_PA_20"
-       tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
+       tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
                 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
                 pa/pa64-linux.h"
        tmake_file="${tmake_file} pa/t-linux64"
@@ -956,7 +1017,7 @@ hppa*64*-*-linux*)
        ;;
 hppa*-*-linux*)
        target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
+       tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
                 pa/pa32-regs.h pa/pa32-linux.h"
        tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
        # Set the libgcc version number
@@ -1006,6 +1067,10 @@ hppa[12]*-*-hpux10*)
        fi
        use_collect2=yes
        gas=yes
+       if test "x$with_dwarf2" != x; then
+               echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
+               dwarf2=no
+       fi
        ;;
 hppa*64*-*-hpux11*)
        target_cpu_default="MASK_PA_11|MASK_PA_20"
@@ -1076,6 +1141,7 @@ hppa[12]*-*-hpux11*)
        else
            tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
        fi
+       extra_parts="libgcc_stub.a"
        case x${enable_threads} in
        x | xyes | xposix )
                thread_file=posix
@@ -1093,24 +1159,22 @@ hppa[12]*-*-hpux11*)
                tm_file="${tm_file} hpux-stdint.h"
                ;;
        esac
+       if test "x$with_dwarf2" != x; then
+               echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
+               dwarf2=no
+       fi
        ;;
 i[34567]86-*-darwin*)
        need_64bit_hwint=yes
        need_64bit_isa=yes
-
-       # This is so that '.../configure && make' doesn't fail due to
-       # config.guess deciding that the configuration is i386-*-darwin* and
-       # then this file using that to set --with-cpu=i386 which has no -m64
-       # support.
-       with_cpu=${with_cpu:-generic}
+       # Baseline choice for a machine that allows m64 support.
+       with_cpu=${with_cpu:-core2}
        tmake_file="${tmake_file} t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
-       lto_binary_reader=lto-macho
        ;;
 x86_64-*-darwin*)
-       with_cpu=${with_cpu:-generic}
+       with_cpu=${with_cpu:-core2}
        tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
        tm_file="${tm_file} ${cpu_type}/darwin64.h"
-       lto_binary_reader=lto-macho
        ;;
 i[34567]86-*-elf*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
@@ -1129,19 +1193,23 @@ x86_64-*-freebsd*)
        ;;
 i[34567]86-*-netbsdelf*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        ;;
 i[34567]86-*-netbsd*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
+       extra_options="${extra_options} netbsd.opt"
        tmake_file="${tmake_file} t-netbsd"
        extra_parts=""
        use_collect2=yes
        ;;
 x86_64-*-netbsd*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        tmake_file="${tmake_file} i386/t-crtstuff"
        ;;
 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
        tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
+       extra_options="${extra_options} openbsd.opt"
        # needed to unconfuse gdb
        tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
        # we need collect2 until our bug is fixed...
@@ -1150,15 +1218,18 @@ i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
 i[34567]86-*-openbsd*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
        tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
+       extra_options="${extra_options} openbsd.opt"
        gas=yes
        gnu_ld=yes
        ;;
 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
                        # Intel 80386's running GNU/*
                        # with ELF format using glibc 2
-       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
+       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
        case ${target} in
        i[34567]86-*-linux*)
+               # Assume modern glibc
+               default_gnu_indirect_function=yes
                if test x$enable_targets = xall; then
                        tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
                        tm_defines="${tm_defines} TARGET_BI_ARCH=1"
@@ -1166,7 +1237,7 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i
                        need_64bit_hwint=yes
                        need_64bit_isa=yes
                        case X"${with_cpu}" in
-                       Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+                       Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
                                ;;
                        X)
                                if test x$with_cpu_64 = x; then
@@ -1175,7 +1246,7 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i
                                ;;
                        *)
                                echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
-                               echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+                               echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
                                exit 1
                                ;;
                        esac
@@ -1191,9 +1262,11 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i
        tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
        ;;
 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
-       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
+       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h \
                 i386/x86-64.h i386/linux64.h"
        case ${target} in
+       x86_64-*-linux*)
+         default_gnu_indirect_function=glibc-2011 ;;
        x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
        x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
        esac
@@ -1219,7 +1292,7 @@ i[34567]86-*-lynxos*)
        gas=yes
        ;;
 i[3456x]86-*-netware*)
-       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
+       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h tm-dwarf2.h i386/netware.h"
        tmake_file="${tmake_file} i386/t-netware"
        extra_objs=netware.o
        case /${with_ld} in
@@ -1238,7 +1311,7 @@ i[3456x]86-*-netware*)
        esac
        ;;
 i[34567]86-*-nto-qnx*)
-       tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
+       tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
        tmake_file="${tmake_file} i386/t-nto"
        gnu_ld=yes
        gas=yes
@@ -1249,7 +1322,7 @@ i[34567]86-*-rtems*)
        tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
        ;;
 i[34567]86-*-solaris2*)
-       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
+       tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sysv4.h sol2.h"
        # Set default arch_32 to pentium4, tune_32 to generic like the other
        # i386 targets, although config.guess defaults to i386-pc-solaris2*.
        case ${target} in
@@ -1302,7 +1375,7 @@ i[34567]86-*-solaris2*)
                need_64bit_isa=yes
                use_gcc_stdint=wrap
                case X"${with_cpu}" in
-               Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+               Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
                        ;;
                X)
                        if test x$with_cpu_64 = x; then
@@ -1311,7 +1384,7 @@ i[34567]86-*-solaris2*)
                        ;;
                *)
                        echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
-                       echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+                       echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
                        exit 1
                        ;;
                esac
@@ -1330,7 +1403,7 @@ i[34567]86-*-solaris2*)
        esac
        ;;
 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
-       tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
+       tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
        case ${target} in
          *-vxworksae*)
            tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
@@ -1355,14 +1428,12 @@ i[34567]86-*-pe | i[34567]86-*-cygwin*)
        target_gtfiles="\$(srcdir)/config/i386/winnt.c"
        extra_options="${extra_options} i386/cygming.opt"
        extra_objs="winnt.o winnt-stubs.o"
-       c_target_objs="${c_target_objs} cygwin2.o msformat-c.o"
-       cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o"
-       extra_gcc_objs=cygwin1.o
+       c_target_objs="${c_target_objs} msformat-c.o"
+       cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
        if test x$enable_threads = xyes; then
                thread_file='posix'
        fi
        use_gcc_stdint=wrap
-       lto_binary_reader=lto-coff
        ;;
 i[34567]86-*-mingw* | x86_64-*-mingw*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
@@ -1378,11 +1449,13 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
        # This makes the logic if mingw's or the w64 feature set has to be used
        case ${target} in
                *-w64-*)
+                       user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
+                       user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
                        tm_file="${tm_file} i386/mingw-w64.h"
                        if test x$enable_targets = xall; then
                                tm_defines="${tm_defines} TARGET_BI_ARCH=1"
                                case X"${with_cpu}" in
-                               Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+                               Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
                                        ;;
                                X)
                                        if test x$with_cpu_64 = x; then
@@ -1391,7 +1464,7 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
                                        ;;
                                *)
                                        echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
-                                       echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+                                       echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
                                        exit 1
                                        ;;
                                esac
@@ -1407,7 +1480,7 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
        else
                tmake_eh_file="i386/t-sjlj-eh"
        fi
-       tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
+       tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming t-dfprules"
         case ${target} in
                x86_64-w64-*)
                                tmake_file="${tmake_file} i386/t-mingw-w64"
@@ -1433,7 +1506,6 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
        cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
        default_use_cxa_atexit=yes
        use_gcc_stdint=wrap
-       lto_binary_reader=lto-coff
        case ${enable_threads} in
          "" | yes | win32)       thread_file='win32'
          tmake_file="${tmake_file} i386/t-gthr-win32"
@@ -1457,6 +1529,7 @@ i[34567]86-*-mingw* | x86_64-*-mingw*)
 i[34567]86-*-interix3*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
        tmake_file="${tmake_file} i386/t-interix"
+       extra_options="${extra_options} rpath.opt interix.opt"
        extra_objs=winnt.o
        target_gtfiles="\$(srcdir)/config/i386/winnt.c"
        if test x$enable_threads = xyes ; then
@@ -1487,7 +1560,7 @@ ia64*-*-freebsd*)
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
        ;;
 ia64*-*-linux*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
+       tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
        tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
        if test x$with_system_libunwind != xyes ; then
                tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
@@ -1496,7 +1569,7 @@ ia64*-*-linux*)
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
        ;;
 ia64*-*-hpux*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
+       tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
        tmake_file="ia64/t-ia64 ia64/t-hpux"
        target_cpu_default="MASK_GNU_AS"
        case x$enable_threads in
@@ -1514,7 +1587,7 @@ ia64*-*-hpux*)
 ia64-hp-*vms*)
        tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
        xm_file="vms/xm-vms.h vms/xm-vms64.h"
-       tmake_file="vms/t-vms vms/t-vms64 ia64/t-ia64 ia64/t-vms"
+       tmake_file="vms/t-vms ia64/t-ia64 ia64/t-vms"
        xmake_file=vms/x-vms
        target_cpu_default="0"
        if test x$gas = xyes
@@ -1526,7 +1599,7 @@ ia64-hp-*vms*)
        extra_options="${extra_options} vms/vms.opt"
        ;;
 iq2000*-*-elf*)
-        tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
+        tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
         tmake_file=iq2000/t-iq2000
         out_file=iq2000/iq2000.c
         md_file=iq2000/iq2000.md
@@ -1536,29 +1609,29 @@ lm32-*-elf*)
        tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
         ;;
 lm32-*-rtems*)
-       tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h"
+       tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
        tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
        tmake_file="${tmake_file} t-rtems"
          ;;
 lm32-*-uclinux*)
-        tm_file="dbxelf.h elfos.h ${tm_file} linux.h lm32/uclinux-elf.h"
+        tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
        tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
         ;;
 m32r-*-elf*)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
        extra_parts="crtinit.o crtfini.o"
        ;;
 m32rle-*-elf*)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
        extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
        ;;
 m32r-*-rtems*)
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
+       tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
        tmake_file="m32r/t-m32r t-rtems"
        extra_parts="crtinit.o crtfini.o"
        ;;
 m32r-*-linux*)
-       tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
+       tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
        # We override the tmake_file for linux -- why?
        tmake_file="t-slibgcc-elf-ver m32r/t-linux"
        gnu_ld=yes
@@ -1567,7 +1640,7 @@ m32r-*-linux*)
        fi
        ;;
 m32rle-*-linux*)
-       tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
+       tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
        # We override the tmake_file for linux -- why?
        tmake_file="t-slibgcc-elf-ver m32r/t-linux"
        gnu_ld=yes
@@ -1629,6 +1702,7 @@ m68k*-*-netbsdelf*)
        default_m68k_cpu=68020
        default_cf_cpu=5475
        tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        tm_defines="${tm_defines} MOTOROLA=1"
        ;;
 m68k*-*-openbsd*)
@@ -1637,6 +1711,7 @@ m68k*-*-openbsd*)
        # needed to unconfuse gdb
        tm_defines="${tm_defines} OBSD_OLD_GAS"
        tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
+       extra_options="${extra_options} openbsd.opt"
        tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
        # we need collect2 until our bug is fixed...
        use_collect2=yes
@@ -1655,9 +1730,8 @@ m68k-*-uclinux*)          # Motorola m68k/ColdFire running uClinux
                                # ABI.
        default_m68k_cpu=68020
        default_cf_cpu=5206
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
-       tm_defines="${tm_defines} MOTOROLA=1 DEFAULT_LIBC=LIBC_UCLIBC"
-       extra_options="${extra_options} linux.opt"
+       tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
+       tm_defines="${tm_defines} MOTOROLA=1"
        tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
        ;;
 m68k-*-linux*)         # Motorola m68k's running GNU/Linux
@@ -1666,7 +1740,7 @@ m68k-*-linux*)            # Motorola m68k's running GNU/Linux
        default_m68k_cpu=68020
        default_cf_cpu=5475
        with_arch=${with_arch:-m68k}
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
+       tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
        extra_options="${extra_options} m68k/ieee.opt"
        tm_defines="${tm_defines} MOTOROLA=1"
        tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
@@ -1685,7 +1759,7 @@ m68k-*-rtems*)
        extra_parts="crtbegin.o crtend.o"
        ;;
 mcore-*-elf)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
        tmake_file=mcore/t-mcore
        inhibit_libc=true
        ;;
@@ -1696,7 +1770,7 @@ mcore-*-pe*)
        use_gcc_stdint=wrap
        ;;
 mep-*-*)
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h ${tm_file}"
        tmake_file=mep/t-mep
        extra_parts="crtbegin.o crtend.o"
        c_target_objs="mep-pragma.o"
@@ -1707,9 +1781,23 @@ mep-*-*)
        fi
        use_gcc_stdint=wrap
        ;;
+microblaze*-linux*)
+       tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
+       c_target_objs="${c_target_objs} microblaze-c.o"
+       cxx_target_objs="${cxx_target_objs} microblaze-c.o"
+       tmake_file="${tmake_file} t-slibgcc-elf-ver t-slibgcc-nolc-override t-linux microblaze/t-microblaze"
+        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o crtbeginT.o"
+       ;;
+microblaze*-*-*)
+        tm_file="${tm_file} dbxelf.h"
+       c_target_objs="${c_target_objs} microblaze-c.o"
+       cxx_target_objs="${cxx_target_objs} microblaze-c.o"
+        tmake_file="${tmake_file} microblaze/t-microblaze"
+        ;;
 mips-sgi-irix6.5*)
        tm_file="elfos.h ${tm_file} mips/iris6.h"
        tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
+       extra_options="${extra_options} rpath.opt"
        target_cpu_default="MASK_ABICALLS"
        tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
        # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
@@ -1729,9 +1817,10 @@ mips-sgi-irix6.5*)
 mips*-*-netbsd*)                       # NetBSD/mips, either endian.
        target_cpu_default="MASK_ABICALLS"
        tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        ;;
 mips64*-*-linux* | mipsisa64*-*-linux*)
-       tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
+       tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
        tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
        tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
        case ${target} in
@@ -1753,7 +1842,7 @@ mips64*-*-linux* | mipsisa64*-*-linux*)
        test x$with_llsc != x || with_llsc=yes
        ;;
 mips*-*-linux*)                                # Linux MIPS, either endian.
-        tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
+        tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
        tmake_file="${tmake_file} mips/t-libgcc-mips16"
        case ${target} in
         mipsisa32r2*)
@@ -1769,6 +1858,7 @@ mips*-*-openbsd*)
        tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
        target_cpu_default="MASK_ABICALLS"
        tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
+       extra_options="${extra_options} openbsd.opt"
        case ${target} in
        mips*el-*-openbsd*)
            tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
@@ -1778,6 +1868,7 @@ mips*-*-openbsd*)
 mips*-sde-elf*)
        tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
        tmake_file="mips/t-sde mips/t-libgcc-mips16"
+       extra_options="${extra_options} mips/sde.opt"
        case "${with_newlib}" in
          yes)
            # newlib / libgloss.
@@ -1880,7 +1971,7 @@ mips*-*-rtems*)
        tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
        ;;
 mips-wrs-vxworks)
-       tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
+       tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
        tmake_file="${tmake_file} mips/t-vxworks"
        ;;
 mipstx39-*-elf* | mipstx39el-*-elf*)
@@ -1893,7 +1984,7 @@ mmix-knuth-mmixware)
        use_gcc_stdint=wrap
        ;;
 mn10300-*-*)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
        if test x$stabs = xyes
        then
                tm_file="${tm_file} dbx.h"
@@ -1908,6 +1999,7 @@ pdp11-*-*)
 picochip-*)
        tm_file="${tm_file} newlib-stdint.h"
        use_gcc_stdint=wrap
+       tmake_file="picochip/t-picochip t-pnt16-warn"
         ;;
 # port not yet contributed
 #powerpc-*-openbsd*)
@@ -1929,7 +2021,6 @@ powerpc-*-darwin*)
            ;;
        esac
        tmake_file="${tmake_file} t-slibgcc-darwin"
-       lto_binary_reader=lto-macho
        extra_headers=altivec.h
        ;;
 powerpc64-*-darwin*)
@@ -1937,7 +2028,6 @@ powerpc64-*-darwin*)
        extra_parts="crt2.o"
        tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin"
        tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
-       lto_binary_reader=lto-macho
        extra_headers=altivec.h
        ;;
 powerpc*-*-freebsd*)
@@ -1947,57 +2037,58 @@ powerpc*-*-freebsd*)
        ;;
 powerpc-*-netbsd*)
        tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        tmake_file="${tmake_file} rs6000/t-netbsd"
        extra_options="${extra_options} rs6000/sysv4.opt"
        ;;
 powerpc-*-eabispe*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
+       tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-spe rs6000/t-ppccomm"
        use_gcc_stdint=wrap
        ;;
 powerpc-*-eabisimaltivec*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
+       tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
        use_gcc_stdint=wrap
        ;;
 powerpc-*-eabisim*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
        use_gcc_stdint=wrap
        ;;
 powerpc-*-elf*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
        ;;
 powerpc-*-eabialtivec*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
+       tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
        use_gcc_stdint=wrap
        ;;
 powerpc-xilinx-eabi*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
        use_gcc_stdint=wrap
        ;;
 powerpc-*-eabi*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
        use_gcc_stdint=wrap
        ;;
 powerpc-*-rtems*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
+       tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
        ;;
 powerpc-*-linux* | powerpc64-*-linux*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+       tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
        maybe_biarch=yes
@@ -2041,12 +2132,12 @@ powerpc-*-linux* | powerpc64-*-linux*)
        fi
        ;;
 powerpc64-*-gnu*)
-       tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
+       tm_file="${tm_file} elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
        extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
        tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
        ;;
 powerpc-*-gnu-gnualtivec*)
-       tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
+       tm_file="${cpu_type}/${cpu_type}.h elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
        extra_options="${extra_options} rs6000/sysv4.opt"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
        if test x$enable_threads = xyes; then
@@ -2054,7 +2145,7 @@ powerpc-*-gnu-gnualtivec*)
        fi
        ;;
 powerpc-*-gnu*)
-       tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
+       tm_file="${cpu_type}/${cpu_type}.h elfos.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
        extra_options="${extra_options} rs6000/sysv4.opt"
        if test x$enable_threads = xyes; then
@@ -2062,7 +2153,7 @@ powerpc-*-gnu*)
        fi
        ;;
 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
-       tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+       tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
        tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
        extra_options="${extra_options} rs6000/sysv4.opt"
        extra_headers=ppc-asm.h
@@ -2082,24 +2173,23 @@ powerpc-*-lynxos*)
        tmake_file="t-lynx rs6000/t-lynx"
        extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
-       extra_options="${extra_options} lynx.opt"
        thread_file=lynx
        gnu_ld=yes
        gas=yes
        ;;
 powerpcle-*-elf*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
        extra_options="${extra_options} rs6000/sysv4.opt"
        ;;
 powerpcle-*-eabisim*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
        extra_options="${extra_options} rs6000/sysv4.opt"
        use_gcc_stdint=wrap
        ;;
 powerpcle-*-eabi*)
-       tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
+       tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
        tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
        extra_options="${extra_options} rs6000/sysv4.opt"
        use_gcc_stdint=wrap
@@ -2150,14 +2240,14 @@ rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
        extra_headers=altivec.h
        ;;
 rx-*-elf*)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
        tmake_file="${tmake_file} rx/t-rx"
        ;;
 s390-*-linux*)
-       tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
+       tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
        ;;
 s390x-*-linux*)
-       tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
+       tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
        tm_p_file=s390/s390-protos.h
        md_file=s390/s390.md
        extra_modes=s390/s390-modes.def
@@ -2165,7 +2255,7 @@ s390x-*-linux*)
        tmake_file="${tmake_file} s390/t-linux64"
        ;;
 s390x-ibm-tpf*)
-        tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
+        tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
         tm_p_file=s390/s390-protos.h
         md_file=s390/s390.md
         extra_modes=s390/s390-modes.def
@@ -2209,16 +2299,15 @@ sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
        case ${with_endian} in
        little*)        tm_file="sh/little.h ${tm_file}" ;;
        esac
-       tm_file="${tm_file} dbxelf.h elfos.h"
-       case ${target} in
-       sh*-*-netbsd*)  ;;
-       *)              tm_file="${tm_file} svr4.h" ;;
-       esac
-       tm_file="${tm_file} sh/elf.h"
+       tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
        case ${target} in
        sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
-                       tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
-       sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
+                       tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
+       sh*-*-netbsd*)
+                       tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
+                       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+
+                       ;;
        sh*-superh-elf) if test x$with_libgloss != xno; then
                                 with_libgloss=yes
                                 tm_file="${tm_file} sh/newlib.h"
@@ -2253,6 +2342,9 @@ sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
        sh64*)
                tmake_file="${tmake_file} sh/t-sh64"
                tm_file="${tm_file} sh/sh64.h"
+               if test x$with_newlib = xyes; then
+                       tm_file="${tm_file} newlib-stdint.h"
+               fi
                extra_headers="shmedia.h ushmedia.h sshmedia.h"
                ;;
        *-*-symbianelf*)
@@ -2365,32 +2457,47 @@ sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
        ;;
 sh-*-rtems*)
        tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
+       tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
        ;;
 sh-wrs-vxworks)
        tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
-       tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
-       ;;
-sparc-*-netbsdelf*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
-       extra_options="${extra_options} sparc/long-double-switch.opt"
-       ;;
-sparc64-*-openbsd*)
-       tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
-       tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
-       extra_options="${extra_options} sparc/little-endian.opt"
-       gas=yes gnu_ld=yes
-       with_cpu=ultrasparc
+       tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
        ;;
 sparc-*-elf*)
-       tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
-       tmake_file="sparc/t-elf sparc/t-crtfm"
-       extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+       tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
+       case ${target} in
+           *-leon-*)
+               tmake_file="sparc/t-leon"
+               ;;
+           *-leon[3-9]*)
+               tmake_file="sparc/t-leon3"
+               ;;
+           *)
+               tmake_file="sparc/t-elf"
+               ;;
+       esac
+       tmake_file="${tmake_file} sparc/t-crtfm"
+       extra_parts="crtbegin.o crtend.o"
        ;;
-sparc-*-linux*)                # SPARC's running GNU/Linux, libc6
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
+sparc-*-rtems*)
+       tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
+       tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
+       extra_parts="crtbegin.o crtend.o"
+       ;;
+sparc-*-linux*)
+       tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h"
        extra_options="${extra_options} sparc/long-double-switch.opt"
-       tmake_file="${tmake_file} sparc/t-linux"
+       case ${target} in
+           *-leon-*)
+               tmake_file="${tmake_file} sparc/t-leon"
+               ;;
+           *-leon[3-9]*)
+               tmake_file="${tmake_file} sparc/t-leon3"
+               ;;
+           *)
+               tmake_file="${tmake_file} sparc/t-linux"
+               ;;
+       esac
        if test x$enable_targets = xall; then
                tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
                tmake_file="${tmake_file} sparc/t-linux64"
@@ -2399,19 +2506,13 @@ sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
        fi
        tmake_file="${tmake_file} sparc/t-crtfm"
        ;;
-sparc-*-rtems*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
-       tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
-       extra_parts="crti.o crtn.o crtbegin.o crtend.o"
-       ;;
-sparc64-*-rtems*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
-       extra_options="${extra_options} sparc/little-endian.opt"
-       tmake_file="${tmake_file} sparc/t-crtfm t-rtems"
-       extra_parts="crtbegin.o crtend.o"
+sparc-*-netbsdelf*)
+       tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+       extra_options="${extra_options} sparc/long-double-switch.opt"
        ;;
 sparc*-*-solaris2*)
-       tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
+       tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sol2.h"
        case ${target} in
            *-*-solaris2.1[0-9]*)
                tm_file="${tm_file} sol2-10.h"
@@ -2462,15 +2563,26 @@ sparc*-*-solaris2*)
        esac
        ;;
 sparc-wrs-vxworks)
-       tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
+       tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
        tmake_file="${tmake_file} sparc/t-vxworks"
        ;;
 sparc64-*-elf*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
+       tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
        extra_options="${extra_options} sparc/little-endian.opt"
        tmake_file="${tmake_file} sparc/t-crtfm"
        extra_parts="crtbegin.o crtend.o"
        ;;
+sparc64-*-rtems*)
+       tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
+       extra_options="${extra_options} sparc/little-endian.opt"
+       tmake_file="${tmake_file} sparc/t-crtfm t-rtems"
+       extra_parts="crtbegin.o crtend.o"
+       ;;
+sparc64-*-linux*)
+       tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/linux64.h"
+       extra_options="${extra_options} sparc/long-double-switch.opt"
+       tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
+       ;;
 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
        tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
        extra_options="${extra_options} sparc/long-double-switch.opt"
@@ -2481,17 +2593,21 @@ sparc64-*-freebsd*|ultrasparc-*-freebsd*)
                *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
        esac
        ;;
-sparc64-*-linux*)              # 64-bit SPARC's running GNU/Linux
-       tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
-       extra_options="${extra_options} sparc/long-double-switch.opt"
-       tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
-       ;;
 sparc64-*-netbsd*)
        tm_file="sparc/biarch64.h ${tm_file}"
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+       tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        extra_options="${extra_options} sparc/long-double-switch.opt"
        tmake_file="${tmake_file} sparc/t-netbsd64"
        ;;
+sparc64-*-openbsd*)
+       tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
+       tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
+       extra_options="${extra_options} openbsd.opt"
+       extra_options="${extra_options} sparc/little-endian.opt"
+       gas=yes gnu_ld=yes
+       with_cpu=ultrasparc
+       ;;
 spu-*-elf*)
        tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
        tmake_file="spu/t-spu-elf"
@@ -2502,10 +2618,11 @@ spu-*-elf*)
        ;;
 v850e1-*-*)
        target_cpu_default="TARGET_CPU_v850e1"
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
        tm_p_file=v850/v850-protos.h
        tmake_file=v850/t-v850e
        md_file=v850/v850.md
+       extra_modes=v850/v850-modes.def
        out_file=v850/v850.c
        extra_options="${extra_options} v850/v850.opt"
        if test x$stabs = xyes
@@ -2519,10 +2636,11 @@ v850e1-*-*)
        ;;
 v850e-*-*)
        target_cpu_default="TARGET_CPU_v850e"
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
        tm_p_file=v850/v850-protos.h
        tmake_file=v850/t-v850e
        md_file=v850/v850.md
+       extra_modes=v850/v850-modes.def
        out_file=v850/v850.c
        extra_options="${extra_options} v850/v850.opt"
        if test x$stabs = xyes
@@ -2536,7 +2654,7 @@ v850e-*-*)
        ;;
 v850-*-*)
        target_cpu_default="TARGET_CPU_generic"
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
        tmake_file=v850/t-v850
        if test x$stabs = xyes
        then
@@ -2548,25 +2666,28 @@ v850-*-*)
        use_gcc_stdint=wrap
        ;;
 vax-*-linux*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
+       tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
        tmake_file="${tmake_file} vax/t-linux"
        ;;
 vax-*-netbsdelf*)
        tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
+       extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
        ;;
 vax-*-netbsd*)
        tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
+       extra_options="${extra_options} netbsd.opt"
        tmake_file=t-netbsd
        extra_parts=""
        use_collect2=yes
        ;;
 vax-*-openbsd*)
        tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
+       extra_options="${extra_options} openbsd.opt"
        use_collect2=yes
        ;;
 xstormy16-*-elf)
        # For historical reasons, the target files omit the 'x'.
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
        tm_p_file=stormy16/stormy16-protos.h
        md_file=stormy16/stormy16.md
        out_file=stormy16/stormy16.c
@@ -2575,28 +2696,28 @@ xstormy16-*-elf)
        extra_parts="crtbegin.o crtend.o"
        ;;
 xtensa*-*-elf*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
+       tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
        tmake_file="xtensa/t-xtensa xtensa/t-elf"
        ;;
 xtensa*-*-linux*)
-       tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
+       tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
        tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
        ;;
 am33_2.0-*-linux*)
-       tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
+       tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
        tmake_file="${tmake_file} mn10300/t-linux"
        gas=yes gnu_ld=yes
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
        use_collect2=no
        ;;
 m32c-*-rtems*)
-       tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
+       tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
        tmake_file="${tmake_file} t-rtems"
        c_target_objs="m32c-pragma.o"
        cxx_target_objs="m32c-pragma.o"
        ;;
 m32c-*-elf*)
-       tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+       tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
        c_target_objs="m32c-pragma.o"
        cxx_target_objs="m32c-pragma.o"
        ;;
@@ -2677,6 +2798,10 @@ case ${target} in
        arch=bdver1
        cpu=bdver1
        ;;
+      btver1-*)
+       arch=btver1
+       cpu=btver1
+       ;;
       amdfam10-*|barcelona-*)
        arch=amdfam10
        cpu=amdfam10
@@ -2735,6 +2860,14 @@ case ${target} in
        arch=core2
        cpu=core2
        ;;
+      corei7-*)
+       arch=corei7
+       cpu=corei7
+       ;;
+      corei7_avx-*)
+       arch=corei7-avx
+       cpu=corei7-avx
+       ;;
       pentium_m-*)
        arch=pentium-m
        cpu=pentium-m
@@ -2758,6 +2891,10 @@ case ${target} in
        arch=bdver1
        cpu=bdver1
        ;;
+      btver1-*)
+       arch=btver1
+       cpu=btver1
+       ;;
       amdfam10-*|barcelona-*)
        arch=amdfam10
        cpu=amdfam10
@@ -2782,6 +2919,10 @@ case ${target} in
        arch=core2
        cpu=core2
        ;;
+      corei7-*)
+       arch=corei7
+       cpu=corei7
+       ;;
       *)
        arch=x86-64
        cpu=generic
@@ -2831,6 +2972,9 @@ if test x$with_cpu = x ; then
     mips*-*-vxworks)
       with_arch=mips2
       ;;
+    sparc-leon*-*)
+      with_cpu=v8;
+      ;;
     sparc*-*-*)
       with_cpu="`echo ${target} | sed 's/-.*$//'`"
       ;;
@@ -2920,6 +3064,9 @@ if test x$with_fpmath != x; then
   case ${target} in
     i[34567]86-*-* | x86_64-*-*)
       case ${with_fpmath} in
+      avx)
+       tm_file="${tm_file} i386/avxmath.h"
+       ;;
       sse)
        tm_file="${tm_file} i386/ssemath.h"
        ;;
@@ -3164,8 +3311,8 @@ case "${target}" in
                                ;;
                        "" | x86-64 | generic | native \
                        | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
-                       | opteron-sse3 | athlon-fx | bdver1 | amdfam10 \
-                       | barcelona | nocona | core2 | atom)
+                       | opteron-sse3 | athlon-fx | bdver1 | btver1 | amdfam10 \
+                       | barcelona | nocona | core2 | corei7 | corei7-avx | atom)
                                # OK
                                ;;
                        *)
@@ -3301,7 +3448,7 @@ case "${target}" in
                for which in arch tune; do
                        eval "val=\$with_$which"
                        case ${val} in
-                       "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
+                       "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
                                # OK
                                ;;
                        *)
@@ -3347,9 +3494,11 @@ case "${target}" in
                for which in cpu tune; do
                        eval "val=\$with_$which"
                        case ${val} in
-                       "" | sparc | sparcv9 | sparc64 | sparc86x \
-                       | v7 | cypress | v8 | supersparc | sparclite | f930 \
-                       | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
+                       "" | sparc | sparcv9 | sparc64 \
+                       | v7 | cypress \
+                       | v8 | supersparc | hypersparc | leon \
+                       | sparclite | f930 | f934 | sparclite86x \
+                       | sparclet | tsc701 \
                        | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
                                # OK
                                ;;
@@ -3450,6 +3599,9 @@ case ${target} in
        i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
                tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
                ;;
+       i[34567]86-*-freebsd* | x86_64-*-freebsd*)
+               tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
+               ;;
        ia64*-*-linux*)
                tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
                ;;
@@ -3464,13 +3616,7 @@ case ${target} in
                                tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
                                ;;
                esac
-               if test "x$enable_gofast" = xyes
-               then
-                       tm_defines="US_SOFTWARE_GOFAST $tm_defines"
-                       tmake_file="mips/t-gofast $tmake_file"
-               else
-                       tmake_file="mips/t-mips $tmake_file"
-               fi
+               tmake_file="mips/t-mips $tmake_file"
                ;;
 
        powerpc*-*-* | rs6000-*-*)
@@ -3496,6 +3642,15 @@ case ${target} in
                cxx_target_objs="${cxx_target_objs} sh-c.o"
                ;;
 
+       sparc-leon*-*)
+               if test x$with_tune = x ; then
+                 with_tune=leon;
+               fi
+
+               # The SPARC port checks this value at compile-time.
+               target_cpu_default2="TARGET_CPU_$with_cpu"
+               ;;
+
        sparc*-*-*)
                # Some standard aliases.
                case x$with_cpu in
@@ -3510,6 +3665,7 @@ case ${target} in
                # The SPARC port checks this value at compile-time.
                target_cpu_default2="TARGET_CPU_$with_cpu"
                ;;
+
        v850*-*-*)
                # FIXME: The v850 is "special" in that it does not support
                # runtime CPU selection, only --with-cpu.