addresses which require two reload registers. */
#define LEGITIMATE_PIC_OPERAND_P(X) legitimate_pic_operand_p (X)
-
-/* Nonzero if the constant value X is a legitimate general operand.
- Anything can be made to work except floating point constants.
- If TARGET_VIS, 0.0 can be made to work as well. */
-
-#define LEGITIMATE_CONSTANT_P(X) legitimate_constant_p (X)
-
-/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
- and check its validity for a certain class.
- We have two alternate definitions for each of them.
- The usual definition accepts all pseudo regs; the other rejects
- them unless they have been allocated suitable hard regs.
- The symbol REG_OK_STRICT causes the latter definition to be used.
-
- Most source files want to accept pseudo regs in the hope that
- they will get allocated to the class that the insn wants them to be in.
- Source files for reload pass need to be strict.
- After reload, it makes no difference, since pseudo regs have
- been eliminated by then. */
-
-#ifndef REG_OK_STRICT
-
-/* Nonzero if X is a hard reg that can be used as an index
- or if it is a pseudo reg. */
-#define REG_OK_FOR_INDEX_P(X) \
- (REGNO (X) < 32 \
- || REGNO (X) == FRAME_POINTER_REGNUM \
- || REGNO (X) >= FIRST_PSEUDO_REGISTER)
-
-/* Nonzero if X is a hard reg that can be used as a base reg
- or if it is a pseudo reg. */
-#define REG_OK_FOR_BASE_P(X) REG_OK_FOR_INDEX_P (X)
-
-#else
-
-/* Nonzero if X is a hard reg that can be used as an index. */
-#define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
-/* Nonzero if X is a hard reg that can be used as a base reg. */
-#define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
-
-#endif
\f
/* Should gcc use [%reg+%lo(xx)+offset] addresses? */
#define USE_AS_OFFSETABLE_LO10 0
#endif
\f
-/* On SPARC, the actual legitimate addresses must be REG+REG or REG+SMALLINT
- ordinarily. This changes a bit when generating PIC. The details are
- in sparc.c's implementation of TARGET_LEGITIMATE_ADDRESS_P. */
-
-#define SYMBOLIC_CONST(X) symbolic_operand (X, VOIDmode)
-
-#define RTX_OK_FOR_BASE_P(X) \
- ((GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
- || (GET_CODE (X) == SUBREG \
- && GET_CODE (SUBREG_REG (X)) == REG \
- && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
-
-#define RTX_OK_FOR_INDEX_P(X) \
- ((GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X)) \
- || (GET_CODE (X) == SUBREG \
- && GET_CODE (SUBREG_REG (X)) == REG \
- && REG_OK_FOR_INDEX_P (SUBREG_REG (X))))
-
-#define RTX_OK_FOR_OFFSET_P(X) \
- (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0x1000 - 8)
-
-#define RTX_OK_FOR_OLO10_P(X) \
- (GET_CODE (X) == CONST_INT && INTVAL (X) >= -0x1000 && INTVAL (X) < 0xc00 - 8)
-
-\f
/* Try a machine-dependent way of reloading an illegitimate address
operand. If we find one, push the reload and jump to WIN. This
macro is used in only one place: `find_reloads_address' in reload.c. */
} \
} while (0)
-#define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \
- ((CHAR) == '#' || (CHAR) == '*' || (CHAR) == '(' \
- || (CHAR) == ')' || (CHAR) == '_' || (CHAR) == '&')
-
-/* Print operand X (an rtx) in assembler syntax to file FILE.
- CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
- For `%' followed by punctuation, CODE is the punctuation and X is null. */
-
-#define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
-
-/* Print a memory address as an operand to reference that memory location. */
-
-#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
-{ register rtx base, index = 0; \
- int offset = 0; \
- register rtx addr = ADDR; \
- if (GET_CODE (addr) == REG) \
- fputs (reg_names[REGNO (addr)], FILE); \
- else if (GET_CODE (addr) == PLUS) \
- { \
- if (GET_CODE (XEXP (addr, 0)) == CONST_INT) \
- offset = INTVAL (XEXP (addr, 0)), base = XEXP (addr, 1);\
- else if (GET_CODE (XEXP (addr, 1)) == CONST_INT) \
- offset = INTVAL (XEXP (addr, 1)), base = XEXP (addr, 0);\
- else \
- base = XEXP (addr, 0), index = XEXP (addr, 1); \
- if (GET_CODE (base) == LO_SUM) \
- { \
- gcc_assert (USE_AS_OFFSETABLE_LO10 \
- && TARGET_ARCH64 \
- && ! TARGET_CM_MEDMID); \
- output_operand (XEXP (base, 0), 0); \
- fputs ("+%lo(", FILE); \
- output_address (XEXP (base, 1)); \
- fprintf (FILE, ")+%d", offset); \
- } \
- else \
- { \
- fputs (reg_names[REGNO (base)], FILE); \
- if (index == 0) \
- fprintf (FILE, "%+d", offset); \
- else if (GET_CODE (index) == REG) \
- fprintf (FILE, "+%s", reg_names[REGNO (index)]); \
- else if (GET_CODE (index) == SYMBOL_REF \
- || GET_CODE (index) == LABEL_REF \
- || GET_CODE (index) == CONST) \
- fputc ('+', FILE), output_addr_const (FILE, index); \
- else gcc_unreachable (); \
- } \
- } \
- else if (GET_CODE (addr) == MINUS \
- && GET_CODE (XEXP (addr, 1)) == LABEL_REF) \
- { \
- output_addr_const (FILE, XEXP (addr, 0)); \
- fputs ("-(", FILE); \
- output_addr_const (FILE, XEXP (addr, 1)); \
- fputs ("-.)", FILE); \
- } \
- else if (GET_CODE (addr) == LO_SUM) \
- { \
- output_operand (XEXP (addr, 0), 0); \
- if (TARGET_CM_MEDMID) \
- fputs ("+%l44(", FILE); \
- else \
- fputs ("+%lo(", FILE); \
- output_address (XEXP (addr, 1)); \
- fputc (')', FILE); \
- } \
- else if (flag_pic && GET_CODE (addr) == CONST \
- && GET_CODE (XEXP (addr, 0)) == MINUS \
- && GET_CODE (XEXP (XEXP (addr, 0), 1)) == CONST \
- && GET_CODE (XEXP (XEXP (XEXP (addr, 0), 1), 0)) == MINUS \
- && XEXP (XEXP (XEXP (XEXP (addr, 0), 1), 0), 1) == pc_rtx) \
- { \
- addr = XEXP (addr, 0); \
- output_addr_const (FILE, XEXP (addr, 0)); \
- /* Group the args of the second CONST in parenthesis. */ \
- fputs ("-(", FILE); \
- /* Skip past the second CONST--it does nothing for us. */\
- output_addr_const (FILE, XEXP (XEXP (addr, 1), 0)); \
- /* Close the parenthesis. */ \
- fputc (')', FILE); \
- } \
- else \
- { \
- output_addr_const (FILE, addr); \
- } \
-}
-
/* TLS support defaulting to original Sun flavor. GNU extensions
must be activated in separate configuration files. */
#ifdef HAVE_AS_TLS
OSDN Git Service
