/* Subroutines for insn-output.c for HPPA.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+ 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
Contributed by Tim Moore (moore@cs.utah.edu), based on sparc.c
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
#include "tm_p.h"
#include "target.h"
#include "target-def.h"
+#include "df.h"
/* Return nonzero if there is a bypass for the output of
OUT_INSN and the fp store IN_INSN. */
#endif
static void pa_init_builtins (void);
static rtx hppa_builtin_saveregs (void);
+static void hppa_va_start (tree, rtx);
static tree hppa_gimplify_va_arg_expr (tree, tree, tree *, tree *);
static bool pa_scalar_mode_supported_p (enum machine_mode);
-static bool pa_commutative_p (rtx x, int outer_code);
+static bool pa_commutative_p (const_rtx x, int outer_code);
static void copy_fp_args (rtx) ATTRIBUTE_UNUSED;
static int length_fp_args (rtx) ATTRIBUTE_UNUSED;
static inline void pa_file_start_level (void) ATTRIBUTE_UNUSED;
#endif
static rtx pa_struct_value_rtx (tree, int);
static bool pa_pass_by_reference (CUMULATIVE_ARGS *, enum machine_mode,
- tree, bool);
+ const_tree, bool);
static int pa_arg_partial_bytes (CUMULATIVE_ARGS *, enum machine_mode,
tree, bool);
static struct machine_function * pa_init_machine_status (void);
static enum reg_class pa_secondary_reload (bool, rtx, enum reg_class,
enum machine_mode,
secondary_reload_info *);
-
+static void pa_extra_live_on_entry (bitmap);
/* The following extra sections are only used for SOM. */
static GTY(()) section *som_readonly_data_section;
registers which were saved by the current function's prologue. */
static int gr_saved, fr_saved;
+/* Boolean indicating whether the return pointer was saved by the
+ current function's prologue. */
+static bool rp_saved;
+
static rtx find_addr_reg (rtx);
/* Keep track of the number of bytes we have output in the CODE subspace
#endif
#undef TARGET_PROMOTE_FUNCTION_RETURN
-#define TARGET_PROMOTE_FUNCTION_RETURN hook_bool_tree_true
+#define TARGET_PROMOTE_FUNCTION_RETURN hook_bool_const_tree_true
#undef TARGET_PROMOTE_PROTOTYPES
-#define TARGET_PROMOTE_PROTOTYPES hook_bool_tree_true
+#define TARGET_PROMOTE_PROTOTYPES hook_bool_const_tree_true
#undef TARGET_STRUCT_VALUE_RTX
#define TARGET_STRUCT_VALUE_RTX pa_struct_value_rtx
#undef TARGET_EXPAND_BUILTIN_SAVEREGS
#define TARGET_EXPAND_BUILTIN_SAVEREGS hppa_builtin_saveregs
+#undef TARGET_EXPAND_BUILTIN_VA_START
+#define TARGET_EXPAND_BUILTIN_VA_START hppa_va_start
#undef TARGET_GIMPLIFY_VA_ARG_EXPR
#define TARGET_GIMPLIFY_VA_ARG_EXPR hppa_gimplify_va_arg_expr
#undef TARGET_SECONDARY_RELOAD
#define TARGET_SECONDARY_RELOAD pa_secondary_reload
+#undef TARGET_EXTRA_LIVE_ON_ENTRY
+#define TARGET_EXTRA_LIVE_ON_ENTRY pa_extra_live_on_entry
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
/* Parse the -mfixed-range= option string. */
/* Accept any constant that can be moved in one instruction into a
general register. */
int
-cint_ok_for_move (HOST_WIDE_INT intval)
+cint_ok_for_move (HOST_WIDE_INT ival)
{
/* OK if ldo, ldil, or zdepi, can be used. */
- return (CONST_OK_FOR_LETTER_P (intval, 'J')
- || CONST_OK_FOR_LETTER_P (intval, 'N')
- || CONST_OK_FOR_LETTER_P (intval, 'K'));
+ return (VAL_14_BITS_P (ival)
+ || ldil_cint_p (ival)
+ || zdepi_cint_p (ival));
}
\f
/* Return truth value of whether OP can be used as an operand in a
&& (TARGET_64BIT ? INT_14_BITS (op) : INT_11_BITS (op))));
}
+/* True iff the operand OP can be used as the destination operand of
+ an integer store. This also implies the operand could be used as
+ the source operand of an integer load. Symbolic, lo_sum and indexed
+ memory operands are not allowed. We accept reloading pseudos and
+ other memory operands. */
+int
+integer_store_memory_operand (rtx op, enum machine_mode mode)
+{
+ return ((reload_in_progress
+ && REG_P (op)
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER
+ && reg_renumber [REGNO (op)] < 0)
+ || (GET_CODE (op) == MEM
+ && (reload_in_progress || memory_address_p (mode, XEXP (op, 0)))
+ && !symbolic_memory_operand (op, VOIDmode)
+ && !IS_LO_SUM_DLT_ADDR_P (XEXP (op, 0))
+ && !IS_INDEX_ADDR_P (XEXP (op, 0))));
+}
+
+/* True iff ldil can be used to load this CONST_INT. The least
+ significant 11 bits of the value must be zero and the value must
+ not change sign when extended from 32 to 64 bits. */
+int
+ldil_cint_p (HOST_WIDE_INT ival)
+{
+ HOST_WIDE_INT x = ival & (((HOST_WIDE_INT) -1 << 31) | 0x7ff);
+
+ return x == 0 || x == ((HOST_WIDE_INT) -1 << 31);
+}
+
/* True iff zdepi can be used to generate this CONST_INT.
zdepi first sign extends a 5-bit signed number to a given field
length, then places this field anywhere in a zero. */
tmp_reg = ((reload_in_progress || reload_completed)
? reg : gen_reg_rtx (Pmode));
+ /* Force function labels into memory. */
+ if (function_label_operand (orig, mode))
+ orig = force_const_mem (mode, orig);
+
emit_move_insn (tmp_reg,
gen_rtx_PLUS (word_mode, pic_offset_table_rtx,
gen_rtx_HIGH (word_mode, orig)));
{
case TLS_MODEL_GLOBAL_DYNAMIC:
tmp = gen_reg_rtx (Pmode);
- emit_insn (gen_tgd_load (tmp, addr));
+ if (flag_pic)
+ emit_insn (gen_tgd_load_pic (tmp, addr));
+ else
+ emit_insn (gen_tgd_load (tmp, addr));
ret = hppa_tls_call (tmp);
break;
ret = gen_reg_rtx (Pmode);
tmp = gen_reg_rtx (Pmode);
start_sequence ();
- emit_insn (gen_tld_load (tmp, addr));
+ if (flag_pic)
+ emit_insn (gen_tld_load_pic (tmp, addr));
+ else
+ emit_insn (gen_tld_load (tmp, addr));
t1 = hppa_tls_call (tmp);
insn = get_insns ();
end_sequence ();
tmp = gen_reg_rtx (Pmode);
ret = gen_reg_rtx (Pmode);
emit_insn (gen_tp_load (tp));
- emit_insn (gen_tie_load (tmp, addr));
+ if (flag_pic)
+ emit_insn (gen_tie_load_pic (tmp, addr));
+ else
+ emit_insn (gen_tie_load (tmp, addr));
emit_move_insn (ret, gen_rtx_PLUS (Pmode, tp, tmp));
break;
addresses from the destination operand. */
if (GET_CODE (operand0) == MEM && IS_INDEX_ADDR_P (XEXP (operand0, 0)))
{
- /* This is only safe up to the beginning of life analysis. */
- gcc_assert (!no_new_pseudos);
+ gcc_assert (can_create_pseudo_p ());
tem = copy_to_mode_reg (Pmode, XEXP (operand0, 0));
operand0 = replace_equiv_address (operand0, tem);
case ADDR_EXPR:
return 1;
+ case POINTER_PLUS_EXPR:
case PLUS_EXPR:
case MINUS_EXPR:
reloc = reloc_needed (TREE_OPERAND (exp, 0));
/* Account for space used by the callee general register saves. */
for (i = 18, j = frame_pointer_needed ? 4 : 3; i >= j; i--)
- if (regs_ever_live[i])
+ if (df_regs_ever_live_p (i))
size += UNITS_PER_WORD;
/* Account for space used by the callee floating point register saves. */
for (i = FP_SAVED_REG_LAST; i >= FP_SAVED_REG_FIRST; i -= FP_REG_STEP)
- if (regs_ever_live[i]
- || (!TARGET_64BIT && regs_ever_live[i + 1]))
+ if (df_regs_ever_live_p (i)
+ || (!TARGET_64BIT && df_regs_ever_live_p (i + 1)))
{
freg_saved = 1;
to output the assembler directives which denote the start
of a function. */
fprintf (file, "\t.CALLINFO FRAME=" HOST_WIDE_INT_PRINT_DEC, actual_fsize);
- if (regs_ever_live[2])
- fputs (",CALLS,SAVE_RP", file);
- else
+ if (current_function_is_leaf)
fputs (",NO_CALLS", file);
+ else
+ fputs (",CALLS", file);
+ if (rp_saved)
+ fputs (",SAVE_RP", file);
/* The SAVE_SP flag is used to indicate that register %r3 is stored
at the beginning of the frame and that it is used as the frame
/* Save RP first. The calling conventions manual states RP will
always be stored into the caller's frame at sp - 20 or sp - 16
depending on which ABI is in use. */
- if (regs_ever_live[2] || current_function_calls_eh_return)
- store_reg (2, TARGET_64BIT ? -16 : -20, STACK_POINTER_REGNUM);
+ if (df_regs_ever_live_p (2) || current_function_calls_eh_return)
+ {
+ store_reg (2, TARGET_64BIT ? -16 : -20, STACK_POINTER_REGNUM);
+ rp_saved = true;
+ }
+ else
+ rp_saved = false;
/* Allocate the local frame and set up the frame pointer if needed. */
if (actual_fsize != 0)
}
for (i = 18; i >= 4; i--)
- if (regs_ever_live[i] && ! call_used_regs[i])
+ if (df_regs_ever_live_p (i) && ! call_used_regs[i])
{
store_reg (i, offset, FRAME_POINTER_REGNUM);
offset += UNITS_PER_WORD;
}
for (i = 18; i >= 3; i--)
- if (regs_ever_live[i] && ! call_used_regs[i])
+ if (df_regs_ever_live_p (i) && ! call_used_regs[i])
{
/* If merge_sp_adjust_with_store is nonzero, then we can
optimize the first GR save. */
/* Now actually save the FP registers. */
for (i = FP_SAVED_REG_LAST; i >= FP_SAVED_REG_FIRST; i -= FP_REG_STEP)
{
- if (regs_ever_live[i]
- || (! TARGET_64BIT && regs_ever_live[i + 1]))
+ if (df_regs_ever_live_p (i)
+ || (! TARGET_64BIT && df_regs_ever_live_p (i + 1)))
{
rtx addr, insn, reg;
addr = gen_rtx_MEM (DFmode, gen_rtx_POST_INC (DFmode, tmpreg));
/* Try to restore RP early to avoid load/use interlocks when
RP gets used in the return (bv) instruction. This appears to still
be necessary even when we schedule the prologue and epilogue. */
- if (regs_ever_live [2] || current_function_calls_eh_return)
+ if (rp_saved)
{
ret_off = TARGET_64BIT ? -16 : -20;
if (frame_pointer_needed)
}
for (i = 18; i >= 4; i--)
- if (regs_ever_live[i] && ! call_used_regs[i])
+ if (df_regs_ever_live_p (i) && ! call_used_regs[i])
{
load_reg (i, offset, FRAME_POINTER_REGNUM);
offset += UNITS_PER_WORD;
for (i = 18; i >= 3; i--)
{
- if (regs_ever_live[i] && ! call_used_regs[i])
+ if (df_regs_ever_live_p (i) && ! call_used_regs[i])
{
/* Only for the first load.
merge_sp_adjust_with_load holds the register load
/* Actually do the restores now. */
for (i = FP_SAVED_REG_LAST; i >= FP_SAVED_REG_FIRST; i -= FP_REG_STEP)
- if (regs_ever_live[i]
- || (! TARGET_64BIT && regs_ever_live[i + 1]))
+ if (df_regs_ever_live_p (i)
+ || (! TARGET_64BIT && df_regs_ever_live_p (i + 1)))
{
rtx src = gen_rtx_MEM (DFmode, gen_rtx_POST_INC (DFmode, tmpreg));
rtx dest = gen_rtx_REG (DFmode, i);
emit_move_insn (gen_rtx_REG (word_mode, 26), gen_rtx_REG (word_mode, 2));
- /* The address of the function is loaded into %r25 with a instruction-
+ /* The address of the function is loaded into %r25 with an instruction-
relative sequence that avoids the use of relocations. The sequence
is split so that the load_offset_label_address instruction can
occupy the delay slot of the call to _mcount. */
return saved_rp;
}
-/* This is only valid once reload has completed because it depends on
- knowing exactly how much (if any) frame there is and...
-
- It's only valid if there is no frame marker to de-allocate and...
-
- It's only valid if %r2 hasn't been saved into the caller's frame
- (we're not profiling and %r2 isn't live anywhere). */
-int
-hppa_can_use_return_insn_p (void)
-{
- return (reload_completed
- && (compute_frame_size (get_frame_size (), 0) ? 0 : 1)
- && ! regs_ever_live[2]
- && ! frame_pointer_needed);
-}
-
void
emit_bcond_fp (enum rtx_code code, rtx operand0)
{
if (regno >= FIRST_PSEUDO_REGISTER || GET_CODE (x) == SUBREG)
regno = true_regnum (x);
- /* Handle out of range displacement for integer mode loads/stores of
- FP registers. */
- if (((regno >= FIRST_PSEUDO_REGISTER || regno == -1)
- && GET_MODE_CLASS (mode) == MODE_INT
- && FP_REG_CLASS_P (class))
- || (class == SHIFT_REGS && (regno <= 0 || regno >= 32)))
+ /* In order to allow 14-bit displacements in integer loads and stores,
+ we need to prevent reload from generating out of range integer mode
+ loads and stores to the floating point registers. Previously, we
+ used to call for a secondary reload and have emit_move_sequence()
+ fix the instruction sequence. However, reload occasionally wouldn't
+ generate the reload and we would end up with an invalid REG+D memory
+ address. So, now we use an intermediate general register for most
+ memory loads and stores. */
+ if ((regno >= FIRST_PSEUDO_REGISTER || regno == -1)
+ && GET_MODE_CLASS (mode) == MODE_INT
+ && FP_REG_CLASS_P (class))
+ {
+ /* Reload passes (mem:SI (reg/f:DI 30 %r30) when it wants to check
+ the secondary reload needed for a pseudo. It never passes a
+ REG+D address. */
+ if (GET_CODE (x) == MEM)
+ {
+ x = XEXP (x, 0);
+
+ /* We don't need an intermediate for indexed and LO_SUM DLT
+ memory addresses. When INT14_OK_STRICT is true, it might
+ appear that we could directly allow register indirect
+ memory addresses. However, this doesn't work because we
+ don't support SUBREGs in floating-point register copies
+ and reload doesn't tell us when it's going to use a SUBREG. */
+ if (IS_INDEX_ADDR_P (x)
+ || IS_LO_SUM_DLT_ADDR_P (x))
+ return NO_REGS;
+
+ /* Otherwise, we need an intermediate general register. */
+ return GENERAL_REGS;
+ }
+
+ /* Request a secondary reload with a general scratch register
+ for everthing else. ??? Could symbolic operands be handled
+ directly when generating non-pic PA 2.0 code? */
+ sri->icode = in_p ? reload_in_optab[mode] : reload_out_optab[mode];
+ return NO_REGS;
+ }
+
+ /* We need a secondary register (GPR) for copies between the SAR
+ and anything other than a general register. */
+ if (class == SHIFT_REGS && (regno <= 0 || regno >= 32))
{
sri->icode = in_p ? reload_in_optab[mode] : reload_out_optab[mode];
return NO_REGS;
/* A SAR<->FP register copy requires a secondary register (GPR) as
well as secondary memory. */
if (regno >= 0 && regno < FIRST_PSEUDO_REGISTER
- && ((REGNO_REG_CLASS (regno) == SHIFT_REGS && FP_REG_CLASS_P (class))
- || (class == SHIFT_REGS
- && FP_REG_CLASS_P (REGNO_REG_CLASS (regno)))))
+ && (REGNO_REG_CLASS (regno) == SHIFT_REGS
+ && FP_REG_CLASS_P (class)))
{
sri->icode = in_p ? reload_in_optab[mode] : reload_out_optab[mode];
return NO_REGS;
}
/* Secondary reloads of symbolic operands require %r1 as a scratch
- register when we're generating PIC code and the operand isn't
+ register when we're generating PIC code and when the operand isn't
readonly. */
if (GET_CODE (x) == HIGH)
x = XEXP (x, 0);
return NO_REGS;
}
+/* Implement TARGET_EXTRA_LIVE_ON_ENTRY. The argument pointer
+ is only marked as live on entry by df-scan when it is a fixed
+ register. It isn't a fixed register in the 64-bit runtime,
+ so we need to mark it here. */
+
+static void
+pa_extra_live_on_entry (bitmap regs)
+{
+ if (TARGET_64BIT)
+ bitmap_set_bit (regs, ARG_POINTER_REGNUM);
+}
+
+/* Implement EH_RETURN_HANDLER_RTX. The MEM needs to be volatile
+ to prevent it from being deleted. */
+
+rtx
+pa_eh_return_handler_rtx (void)
+{
+ rtx tmp;
+
+ tmp = gen_rtx_PLUS (word_mode, frame_pointer_rtx,
+ TARGET_64BIT ? GEN_INT (-16) : GEN_INT (-20));
+ tmp = gen_rtx_MEM (word_mode, tmp);
+ tmp->volatil = 1;
+ return tmp;
+}
+
/* In the 32-bit runtime, arguments larger than eight bytes are passed
by invisible reference. As a GCC extension, we also pass anything
with a zero or variable size by reference.
static bool
pa_pass_by_reference (CUMULATIVE_ARGS *ca ATTRIBUTE_UNUSED,
- enum machine_mode mode, tree type,
+ enum machine_mode mode, const_tree type,
bool named ATTRIBUTE_UNUSED)
{
HOST_WIDE_INT size;
}
enum direction
-function_arg_padding (enum machine_mode mode, tree type)
+function_arg_padding (enum machine_mode mode, const_tree type)
{
if (mode == BLKmode
|| (TARGET_64BIT && type && AGGREGATE_TYPE_P (type)))
offset, 0, 0, OPTAB_LIB_WIDEN));
}
-void
+static void
hppa_va_start (tree valist, rtx nextarg)
{
nextarg = expand_builtin_saveregs ();
/* Args grow down. Not handled by generic routines. */
- u = fold_convert (valist_type, size_in_bytes (type));
- t = build2 (MINUS_EXPR, valist_type, valist, u);
+ u = fold_convert (sizetype, size_in_bytes (type));
+ u = fold_build1 (NEGATE_EXPR, sizetype, u);
+ t = build2 (POINTER_PLUS_EXPR, valist_type, valist, u);
/* Copied from va-pa.h, but we probably don't need to align to
word size, since we generate and preserve that invariant. */
- u = build_int_cst (valist_type, (size > 4 ? -8 : -4));
- t = build2 (BIT_AND_EXPR, valist_type, t, u);
+ u = size_int (size > 4 ? -8 : -4);
+ t = fold_convert (sizetype, t);
+ t = build2 (BIT_AND_EXPR, sizetype, t, u);
+ t = fold_convert (valist_type, t);
t = build2 (MODIFY_EXPR, valist_type, valist, t);
ofs = (8 - size) % 4;
if (ofs != 0)
{
- u = fold_convert (valist_type, size_int (ofs));
- t = build2 (PLUS_EXPR, valist_type, t, u);
+ u = size_int (ofs);
+ t = build2 (POINTER_PLUS_EXPR, valist_type, t, u);
}
t = fold_convert (ptr, t);
optimize, 0, NULL);
/* Now delete the delay insn. */
- PUT_CODE (NEXT_INSN (insn), NOTE);
- NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+ SET_INSN_DELETED (NEXT_INSN (insn));
}
/* Output an insn to save %r1. The runtime documentation doesn't
for other purposes. */
if (TARGET_64BIT)
{
- if (actual_fsize == 0 && !regs_ever_live[2])
+ if (actual_fsize == 0 && !df_regs_ever_live_p (2))
/* Use the return pointer slot in the frame marker. */
output_asm_insn ("std %%r1,-16(%%r30)", xoperands);
else
}
else
{
- if (actual_fsize == 0 && !regs_ever_live[2])
+ if (actual_fsize == 0 && !df_regs_ever_live_p (2))
/* Use the return pointer slot in the frame marker. */
output_asm_insn ("stw %%r1,-20(%%r30)", xoperands);
else
/* Now restore the value of %r1 in the delay slot. */
if (TARGET_64BIT)
{
- if (actual_fsize == 0 && !regs_ever_live[2])
+ if (actual_fsize == 0 && !df_regs_ever_live_p (2))
return "ldd -16(%%r30),%%r1";
else
return "ldd -40(%%r30),%%r1";
}
else
{
- if (actual_fsize == 0 && !regs_ever_live[2])
+ if (actual_fsize == 0 && !df_regs_ever_live_p (2))
return "ldw -20(%%r30),%%r1";
else
return "ldw -12(%%r30),%%r1";
output_asm_insn ("nop\n\tb,n %0", xoperands);
/* Delete the jump. */
- PUT_CODE (NEXT_INSN (insn), NOTE);
- NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+ SET_INSN_DELETED (NEXT_INSN (insn));
return "";
}
optimize, 0, NULL);
/* Now delete the delay insn. */
- PUT_CODE (NEXT_INSN (insn), NOTE);
- NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+ SET_INSN_DELETED (NEXT_INSN (insn));
delay_insn_deleted = 1;
}
NULL);
/* Now delete the delay insn. */
- PUT_CODE (NEXT_INSN (insn), NOTE);
- NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+ SET_INSN_DELETED (NEXT_INSN (insn));
delay_insn_deleted = 1;
}
output_asm_insn ("b,n %0", xoperands);
/* Delete the jump. */
- PUT_CODE (NEXT_INSN (insn), NOTE);
- NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+ SET_INSN_DELETED (NEXT_INSN (insn));
return "";
}
static void
pa_encode_section_info (tree decl, rtx rtl, int first)
{
+ int old_referenced = 0;
+
+ if (!first && MEM_P (rtl) && GET_CODE (XEXP (rtl, 0)) == SYMBOL_REF)
+ old_referenced
+ = SYMBOL_REF_FLAGS (XEXP (rtl, 0)) & SYMBOL_FLAG_REFERENCED;
+
default_encode_section_info (decl, rtl, first);
if (first && TEXT_SPACE_P (decl))
if (TREE_CODE (decl) == FUNCTION_DECL)
hppa_encode_label (XEXP (rtl, 0));
}
+ else if (old_referenced)
+ SYMBOL_REF_FLAGS (XEXP (rtl, 0)) |= old_referenced;
}
/* This is sort of inverse to pa_encode_section_info. */
space register selection rules for memory addresses. Therefore, we
don't consider a + b == b + a, as this might be inside a MEM. */
static bool
-pa_commutative_p (rtx x, int outer_code)
+pa_commutative_p (const_rtx x, int outer_code)
{
return (COMMUTATIVE_P (x)
&& (TARGET_NO_SPACE_REGS
PATTERN (floater))),
anchor);
- PUT_CODE (anchor, NOTE);
- NOTE_LINE_NUMBER (anchor) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (anchor) = 0;
+ SET_INSN_DELETED (anchor);
/* Emit a special USE insn for FLOATER, then delete
the floating insn. */
anchor);
JUMP_LABEL (temp) = JUMP_LABEL (anchor);
- PUT_CODE (anchor, NOTE);
- NOTE_LINE_NUMBER (anchor) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (anchor) = 0;
+ SET_INSN_DELETED (anchor);
/* Emit a special USE insn for FLOATER, then delete
the floating insn. */
to match the HP Compiler ABI. */
rtx
-function_value (tree valtype, tree func ATTRIBUTE_UNUSED)
+function_value (const_tree valtype, const_tree func ATTRIBUTE_UNUSED)
{
enum machine_mode valmode;
}
if ((INTEGRAL_TYPE_P (valtype)
- && TYPE_PRECISION (valtype) < BITS_PER_WORD)
+ && GET_MODE_BITSIZE (TYPE_MODE (valtype)) < BITS_PER_WORD)
|| POINTER_TYPE_P (valtype))
valmode = word_mode;
else
gcc_assert (TARGET_SOM);
if (TARGET_GAS)
{
- if (cfun && !cfun->machine->in_nsubspa)
+ if (cfun && cfun->machine && !cfun->machine->in_nsubspa)
{
/* We only want to emit a .nsubspa directive once at the
start of the function. */
text section to output debugging information. Thus, we
need to forget that we are in the text section so that
varasm.c will call us when text_section is selected again. */
- gcc_assert (!cfun || cfun->machine->in_nsubspa == 2);
+ gcc_assert (!cfun || !cfun->machine
+ || cfun->machine->in_nsubspa == 2);
in_section = NULL;
}
output_section_asm_op ("\t.SPACE $TEXT$\n\t.NSUBSPA $CODE$");
/* Worker function for TARGET_RETURN_IN_MEMORY. */
bool
-pa_return_in_memory (tree type, tree fntype ATTRIBUTE_UNUSED)
+pa_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED)
{
/* SOM ABI says that objects larger than 64 bits are returned in memory.
PA64 ABI says that objects larger than 128 bits are returned in memory.
}
#endif
+/* Return true if a change from mode FROM to mode TO for a register
+ in register class CLASS is invalid. */
+
+bool
+pa_cannot_change_mode_class (enum machine_mode from, enum machine_mode to,
+ enum reg_class class)
+{
+ if (from == to)
+ return false;
+
+ /* Reject changes to/from complex and vector modes. */
+ if (COMPLEX_MODE_P (from) || VECTOR_MODE_P (from)
+ || COMPLEX_MODE_P (to) || VECTOR_MODE_P (to))
+ return true;
+
+ if (GET_MODE_SIZE (from) == GET_MODE_SIZE (to))
+ return false;
+
+ /* There is no way to load QImode or HImode values directly from
+ memory. SImode loads to the FP registers are not zero extended.
+ On the 64-bit target, this conflicts with the definition of
+ LOAD_EXTEND_OP. Thus, we can't allow changing between modes
+ with different sizes in the floating-point registers. */
+ if (MAYBE_FP_REG_CLASS_P (class))
+ return true;
+
+ /* HARD_REGNO_MODE_OK places modes with sizes larger than a word
+ in specific sets of registers. Thus, we cannot allow changing
+ to a larger mode when it's larger than a word. */
+ if (GET_MODE_SIZE (to) > UNITS_PER_WORD
+ && GET_MODE_SIZE (to) > GET_MODE_SIZE (from))
+ return true;
+
+ return false;
+}
+
+/* Returns TRUE if it is a good idea to tie two pseudo registers
+ when one has mode MODE1 and one has mode MODE2.
+ If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
+ for any hard reg, then this must be FALSE for correct output.
+
+ We should return FALSE for QImode and HImode because these modes
+ are not ok in the floating-point registers. However, this prevents
+ tieing these modes to SImode and DImode in the general registers.
+ So, this isn't a good idea. We rely on HARD_REGNO_MODE_OK and
+ CANNOT_CHANGE_MODE_CLASS to prevent these modes from being used
+ in the floating-point registers. */
+
+bool
+pa_modes_tieable_p (enum machine_mode mode1, enum machine_mode mode2)
+{
+ /* Don't tie modes in different classes. */
+ if (GET_MODE_CLASS (mode1) != GET_MODE_CLASS (mode2))
+ return false;
+
+ return true;
+}
+
#include "gt-pa.h"