BLOCK_MOVE_LAST /* generate just the last store */
};
+/* Information about one recognised processor. Defined here for the
+ benefit of TARGET_CPU_CPP_BUILTINS. */
+struct mips_cpu_info {
+ /* The 'canonical' name of the processor as far as GCC is concerned.
+ It's typically a manufacturer's prefix followed by a numerical
+ designation. It should be lower case. */
+ const char *name;
+
+ /* The internal processor number that most closely matches this
+ entry. Several processors can have the same value, if there's no
+ difference between them from GCC's point of view. */
+ enum processor_type cpu;
+
+ /* The ISA level that the processor implements. */
+ int isa;
+};
+
extern char mips_reg_names[][8]; /* register names (a0 vs. $4). */
extern char mips_print_operand_punct[256]; /* print_operand punctuation chars */
extern const char *current_function_file; /* filename current function is in */
extern int mips16; /* whether generating mips16 code */
extern int mips16_hard_float; /* mips16 without -msoft-float */
extern int mips_entry; /* generate entry/exit for mips16 */
-extern const char *mips_cpu_string; /* for -mcpu=<xxx> */
extern const char *mips_arch_string; /* for -march=<xxx> */
extern const char *mips_tune_string; /* for -mtune=<xxx> */
extern const char *mips_isa_string; /* for -mips{1,2,3,4} */
extern const char *mips_abi_string; /* for -mabi={32,n32,64} */
extern const char *mips_entry_string; /* for -mentry */
extern const char *mips_no_mips16_string;/* for -mno-mips16 */
-extern const char *mips_explicit_type_size_string;/* for -mexplicit-type-size */
extern const char *mips_cache_flush_func;/* for -mflush-func= and -mno-flush-func */
extern int mips_split_addresses; /* perform high/lo_sum support */
extern int dslots_load_total; /* total # load related delay slots */
extern GTY(()) rtx mips_load_reg3; /* 3rd reg to check for load delay */
extern GTY(()) rtx mips_load_reg4; /* 4th reg to check for load delay */
extern int mips_string_length; /* length of strings for mips16 */
+extern const struct mips_cpu_info mips_cpu_info_table[];
+extern const struct mips_cpu_info *mips_arch_info;
+extern const struct mips_cpu_info *mips_tune_info;
/* Functions to change what output section we are using. */
extern void sdata_section PARAMS ((void));
#define TUNE_MIPS5000 (mips_tune == PROCESSOR_R5000)
#define TUNE_MIPS6000 (mips_tune == PROCESSOR_R6000)
+/* Define preprocessor macros for the -march and -mtune options.
+ PREFIX is either _MIPS_ARCH or _MIPS_TUNE, INFO is the selected
+ processor. If INFO's canonical name is "foo", define PREFIX to
+ be "foo", and define an additional macro PREFIX_FOO. */
+#define MIPS_CPP_SET_PROCESSOR(PREFIX, INFO) \
+ do \
+ { \
+ char *macro, *p; \
+ \
+ macro = concat ((PREFIX), "_", (INFO)->name, NULL); \
+ for (p = macro; *p != 0; p++) \
+ *p = TOUPPER (*p); \
+ \
+ builtin_define (macro); \
+ builtin_define_with_value ((PREFIX), (INFO)->name, 1); \
+ free (macro); \
+ } \
+ while (0)
+
/* Target CPU builtins. */
#define TARGET_CPU_CPP_BUILTINS() \
do \
if (!flag_iso) \
builtin_define ("mips"); \
\
+ /* Treat _R3000 and _R4000 like register-size defines, \
+ which is how they've historically been used. */ \
if (TARGET_64BIT) \
{ \
builtin_define ("__mips64"); \
- /* Silly, but will do until processor defines. */ \
builtin_define_std ("R4000"); \
builtin_define ("_R4000"); \
} \
else \
{ \
- /* Ditto. */ \
builtin_define_std ("R3000"); \
builtin_define ("_R3000"); \
} \
if (TARGET_MIPS16) \
builtin_define ("__mips16"); \
\
+ MIPS_CPP_SET_PROCESSOR ("_MIPS_ARCH", mips_arch_info); \
+ MIPS_CPP_SET_PROCESSOR ("_MIPS_TUNE", mips_tune_info); \
+ \
if (ISA_MIPS1) \
{ \
builtin_define ("__mips=1"); \
#define TARGET_ENDIAN_DEFAULT MASK_BIG_ENDIAN
#endif
+/* 'from-abi' makes a good default: you get whatever the ABI requires. */
#ifndef MIPS_ISA_DEFAULT
-#define MIPS_ISA_DEFAULT 1
+#ifndef MIPS_CPU_STRING_DEFAULT
+#define MIPS_CPU_STRING_DEFAULT "from-abi"
+#endif
#endif
#ifdef IN_LIBGCC2
#endif
#ifndef MULTILIB_DEFAULTS
-#define MULTILIB_DEFAULTS { MULTILIB_ENDIAN_DEFAULT, MULTILIB_ISA_DEFAULT }
+#define MULTILIB_DEFAULTS \
+ { MULTILIB_ENDIAN_DEFAULT, MULTILIB_ISA_DEFAULT, MULTILIB_ABI_DEFAULT }
#endif
/* We must pass -EL to the linker by default for little endian embedded
#define TARGET_OPTIONS \
{ \
SUBTARGET_TARGET_OPTIONS \
- { "cpu=", &mips_cpu_string, \
- N_("Specify CPU for scheduling purposes")}, \
{ "tune=", &mips_tune_string, \
N_("Specify CPU for scheduling purposes")}, \
{ "arch=", &mips_arch_string, \
N_("Specify CPU for code generation purposes")}, \
+ { "abi=", &mips_abi_string, \
+ N_("Specify an ABI")}, \
{ "ips", &mips_isa_string, \
N_("Specify a Standard MIPS ISA")}, \
{ "entry", &mips_entry_string, \
N_("Use mips16 entry/exit psuedo ops")}, \
{ "no-mips16", &mips_no_mips16_string, \
N_("Don't use MIPS16 instructions")}, \
- { "explicit-type-size", &mips_explicit_type_size_string, \
- NULL}, \
{ "no-flush-func", &mips_cache_flush_func, \
N_("Don't call any cache flush functions")}, \
{ "flush-func=", &mips_cache_flush_func, \
#define BRANCH_LIKELY_P() GENERATE_BRANCHLIKELY
#define HAVE_SQRT_P() (!ISA_MIPS1)
+/* True if the ABI can only work with 64-bit integer registers. We
+ generally allow ad-hoc variations for TARGET_SINGLE_FLOAT, but
+ otherwise floating-point registers must also be 64-bit. */
+#define ABI_NEEDS_64BIT_REGS (mips_abi == ABI_64 \
+ || mips_abi == ABI_O64 \
+ || mips_abi == ABI_N32)
+
+/* Likewise for 32-bit regs. */
+#define ABI_NEEDS_32BIT_REGS (mips_abi == ABI_32)
+
/* ISA has instructions for managing 64 bit fp and gp regs (eg. mips3). */
#define ISA_HAS_64BIT_REGS (ISA_MIPS3 \
|| ISA_MIPS4 \
/* GAS_ASM_SPEC is passed when using gas, rather than the MIPS
assembler. */
-#define GAS_ASM_SPEC "%{march=*} %{mtune=*} %{mcpu=*} %{m4650} %{mmad:-m4650} %{m3900} %{v} %{mgp32} %{mgp64} %(abi_gas_asm_spec) %{mabi=32:%{!mips*:-mips1}}"
+#define GAS_ASM_SPEC "%{mtune=*} %{v}"
extern int mips_abi;
#define MIPS_ABI_DEFAULT ABI_32
#endif
-#ifndef ABI_GAS_ASM_SPEC
-#define ABI_GAS_ASM_SPEC ""
+/* Use the most portable ABI flag for the ASM specs. */
+
+#if MIPS_ABI_DEFAULT == ABI_32
+#define MULTILIB_ABI_DEFAULT "mabi=32"
+#define ASM_ABI_DEFAULT_SPEC "-32"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_O64
+#define MULTILIB_ABI_DEFAULT "mabi=o64"
+#define ASM_ABI_DEFAULT_SPEC "-mabi=o64"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_N32
+#define MULTILIB_ABI_DEFAULT "mabi=n32"
+#define ASM_ABI_DEFAULT_SPEC "-n32"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_64
+#define MULTILIB_ABI_DEFAULT "mabi=64"
+#define ASM_ABI_DEFAULT_SPEC "-64"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_EABI
+#define MULTILIB_ABI_DEFAULT "mabi=eabi"
+#define ASM_ABI_DEFAULT_SPEC "-mabi=eabi"
+#endif
+
+#if MIPS_ABI_DEFAULT == ABI_MEABI
+/* Most GAS don't know about MEABI. */
+#define MULTILIB_ABI_DEFAULT "mabi=meabi"
+#define ASM_ABI_DEFAULT_SPEC ""
+#endif
+
+/* Only ELF targets can switch the ABI. */
+#ifndef OBJECT_FORMAT_ELF
+#undef ASM_ABI_DEFAULT_SPEC
+#define ASM_ABI_DEFAULT_SPEC ""
#endif
/* TARGET_ASM_SPEC is used to select either MIPS_AS_ASM_SPEC or
#define SUBTARGET_ASM_SPEC ""
#endif
-/* ASM_SPEC is the set of arguments to pass to the assembler. */
+/* ASM_SPEC is the set of arguments to pass to the assembler. Note: we
+ pass -mgp32, -mgp64, -march, -mabi=eabi and -meabi=o64 regardless of
+ whether we're using GAS. These options can only be used properly
+ with GAS, and it is better to get an error from a non-GAS assembler
+ than to silently generate bad code. */
#undef ASM_SPEC
#define ASM_SPEC "\
%(subtarget_asm_optimizing_spec) \
%(subtarget_asm_debugging_spec) \
%{membedded-pic} \
-%{mabi=32:-32}%{mabi=o32:-32}%{mabi=n32:-n32}%{mabi=64:-64}%{mabi=n64:-64} \
+%{mabi=32:-32}%{mabi=n32:-n32}%{mabi=64:-64}%{mabi=n64:-64} \
+%{mabi=eabi} %{mabi=o64} %{!mabi*: %(asm_abi_default_spec)} \
+%{mgp32} %{mgp64} %{march=*} \
%(target_asm_spec) \
%(subtarget_asm_spec)"
#ifndef CC1_SPEC
#define CC1_SPEC "\
%{gline:%{!g:%{!g0:%{!g1:%{!g2: -g1}}}}} \
-%{mips1:-mfp32 -mgp32} %{mips2:-mfp32 -mgp32}\
-%{mips3:%{!msingle-float:%{!m4650:-mfp64}} -mgp64} \
-%{mips4:%{!msingle-float:%{!m4650:-mfp64}} -mgp64} \
-%{mips32:-mfp32 -mgp32} \
-%{mips64:%{!msingle-float:-mfp64} -mgp64} \
-%{mfp64:%{msingle-float:%emay not use both -mfp64 and -msingle-float}} \
-%{mfp64:%{m4650:%emay not use both -mfp64 and -m4650}} \
-%{mint64|mlong64|mlong32:-mexplicit-type-size }\
-%{mgp32: %{mfp64:%emay not use both -mgp32 and -mfp64} %{!mfp32: -mfp32}} \
%{G*} %{EB:-meb} %{EL:-mel} %{EB:%{EL:%emay not use both -EB and -EL}} \
%{save-temps: } \
%(subtarget_cc1_spec)"
{ "subtarget_cpp_spec", SUBTARGET_CPP_SPEC }, \
{ "mips_as_asm_spec", MIPS_AS_ASM_SPEC }, \
{ "gas_asm_spec", GAS_ASM_SPEC }, \
- { "abi_gas_asm_spec", ABI_GAS_ASM_SPEC }, \
{ "target_asm_spec", TARGET_ASM_SPEC }, \
{ "subtarget_mips_as_asm_spec", SUBTARGET_MIPS_AS_ASM_SPEC }, \
{ "subtarget_asm_optimizing_spec", SUBTARGET_ASM_OPTIMIZING_SPEC }, \
{ "subtarget_asm_debugging_spec", SUBTARGET_ASM_DEBUGGING_SPEC }, \
{ "subtarget_asm_spec", SUBTARGET_ASM_SPEC }, \
+ { "asm_abi_default_spec", ASM_ABI_DEFAULT_SPEC }, \
{ "endian_spec", ENDIAN_SPEC }, \
SUBTARGET_EXTRA_SPECS
OSDN Git Service
