%{m68060}%{mcpu32}%{m68332}%{m5200}%{m5206e}%{m528x}%{m5307}%{m5407}%{mcfv4e}\
%{mcpu=*:-mcpu=%*}%{march=*:-march=%*}\
"
+#define ASM_PCREL_SPEC "%{fPIC|fpic|mpcrel:--pcrel} \
+ %{msep-data|mid-shared-library:--pcrel} \
+"
-#define ASM_SPEC "%(asm_cpu_spec)"
+#define ASM_SPEC "%(asm_cpu_spec) %(asm_pcrel_spec)"
#define EXTRA_SPECS \
{ "asm_cpu_spec", ASM_CPU_SPEC }, \
+ { "asm_pcrel_spec", ASM_PCREL_SPEC }, \
SUBTARGET_EXTRA_SPECS
#define SUBTARGET_EXTRA_SPECS
\f
/* target machine storage layout */
-/* "long double" is the same as "double" on ColdFire targets. */
+/* "long double" is the same as "double" on ColdFire and fido
+ targets. */
-#define LONG_DOUBLE_TYPE_SIZE (TARGET_COLDFIRE ? 64 : 80)
+#define LONG_DOUBLE_TYPE_SIZE \
+ ((TARGET_COLDFIRE || TARGET_FIDOA) ? 64 : 80)
/* We need to know the size of long double at compile-time in libgcc2. */
-#ifdef __mcoldfire__
+#if defined(__mcoldfire__) || defined(__mfido__)
#define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
#else
#define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 80
/* Specify the registers used for certain standard purposes.
The values of these macros are register numbers. */
-#define STACK_POINTER_REGNUM 15
+#define STACK_POINTER_REGNUM SP_REG
/* Most m68k targets use %a6 as a frame pointer. The AmigaOS
ABI uses %a6 for shared library calls, therefore the frame
pointer is shifted to %a5 on this target. */
-#define FRAME_POINTER_REGNUM 14
+#define FRAME_POINTER_REGNUM A6_REG
#define FRAME_POINTER_REQUIRED 0
*/
#define ARG_POINTER_REGNUM 24
-#define STATIC_CHAIN_REGNUM 8
+#define STATIC_CHAIN_REGNUM A0_REG
#define M68K_STATIC_CHAIN_REG_NAME REGISTER_PREFIX "a0"
/* Register in which address to store a structure value
is passed to a function. */
-#define M68K_STRUCT_VALUE_REGNUM 9
+#define M68K_STRUCT_VALUE_REGNUM A1_REG
\f
#define INDEX_REG_CLASS GENERAL_REGS
#define BASE_REG_CLASS ADDR_REGS
-/* We do a trick here to modify the effective constraints on the
- machine description; we zorch the constraint letters that aren't
- appropriate for a specific target. This allows us to guarantee
- that a specific kind of register will not be used for a given target
- without fiddling with the register classes above. */
-#define REG_CLASS_FROM_LETTER(C) \
- ((C) == 'a' ? ADDR_REGS : \
- ((C) == 'd' ? DATA_REGS : \
- ((C) == 'f' ? (TARGET_HARD_FLOAT ? \
- FP_REGS : NO_REGS) : \
- NO_REGS)))
-
-/* For the m68k, `I' is used for the range 1 to 8
- allowed as immediate shift counts and in addq.
- `J' is used for the range of signed numbers that fit in 16 bits.
- `K' is for numbers that moveq can't handle.
- `L' is for range -8 to -1, range of values that can be added with subq.
- `M' is for numbers that moveq+notb can't handle.
- 'N' is for range 24 to 31, rotatert:SI 8 to 1 expressed as rotate.
- 'O' is for 16 (for rotate using swap).
- 'P' is for range 8 to 15, rotatert:HI 8 to 1 expressed as rotate.
- 'R' is for numbers that mov3q can handle. */
-#define CONST_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'I' ? (VALUE) > 0 && (VALUE) <= 8 : \
- (C) == 'J' ? (VALUE) >= -0x8000 && (VALUE) <= 0x7FFF : \
- (C) == 'K' ? (VALUE) < -0x80 || (VALUE) >= 0x80 : \
- (C) == 'L' ? (VALUE) < 0 && (VALUE) >= -8 : \
- (C) == 'M' ? (VALUE) < -0x100 || (VALUE) >= 0x100 : \
- (C) == 'N' ? (VALUE) >= 24 && (VALUE) <= 31 : \
- (C) == 'O' ? (VALUE) == 16 : \
- (C) == 'P' ? (VALUE) >= 8 && (VALUE) <= 15 : \
- (C) == 'R' ? valid_mov3q_const (VALUE) : 0)
-
-/* "G" defines all of the floating constants that are *NOT* 68881
- constants. This is so 68881 constants get reloaded and the
- fpmovecr is used. */
-#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'G' ? ! (TARGET_68881 && standard_68881_constant_p (VALUE)) : 0 )
-
-/* `Q' means address register indirect addressing mode.
- `S' is for operands that satisfy 'm' when -mpcrel is in effect.
- `T' is for operands that satisfy 's' when -mpcrel is not in effect.
- `U' is for register offset addressing.
- `W' is for const_call_operands. */
-#define EXTRA_CONSTRAINT(OP,CODE) \
- ((CODE) == 'S' \
- ? (TARGET_PCREL \
- && GET_CODE (OP) == MEM \
- && (GET_CODE (XEXP (OP, 0)) == SYMBOL_REF \
- || GET_CODE (XEXP (OP, 0)) == LABEL_REF \
- || GET_CODE (XEXP (OP, 0)) == CONST)) \
- : \
- (CODE) == 'T' \
- ? (!flag_pic \
- && (GET_CODE (OP) == SYMBOL_REF \
- || GET_CODE (OP) == LABEL_REF \
- || GET_CODE (OP) == CONST)) \
- : \
- (CODE) == 'Q' \
- ? m68k_matches_q_p (OP) \
- : \
- (CODE) == 'U' \
- ? m68k_matches_u_p (OP) \
- : \
- (CODE) == 'W' \
- ? const_call_operand (OP, VOIDmode) \
- : 0)
-
#define PREFERRED_RELOAD_CLASS(X,CLASS) \
m68k_preferred_reload_class (X, CLASS)
/* On the m68k the return value defaults to D0. */
#define FUNCTION_VALUE(VALTYPE, FUNC) \
- gen_rtx_REG (TYPE_MODE (VALTYPE), 0)
+ gen_rtx_REG (TYPE_MODE (VALTYPE), D0_REG)
/* On the m68k the return value defaults to D0. */
-#define LIBCALL_VALUE(MODE) gen_rtx_REG (MODE, 0)
+#define LIBCALL_VALUE(MODE) gen_rtx_REG (MODE, D0_REG)
/* On the m68k, D0 is usually the only register used. */
-#define FUNCTION_VALUE_REGNO_P(N) ((N) == 0)
+#define FUNCTION_VALUE_REGNO_P(N) ((N) == D0_REG)
/* Define this to be true when FUNCTION_VALUE_REGNO_P is true for
more than one register.
We don't replace %fp for targets that don't map it to %a6
since it may confuse GAS. */
#define M68K_REGNAME(r) ( \
- ((FRAME_POINTER_REGNUM == 14) \
+ ((FRAME_POINTER_REGNUM == A6_REG) \
&& ((r) == FRAME_POINTER_REGNUM) \
&& frame_pointer_needed) ? \
M68K_FP_REG_NAME : reg_names[(r)])
#define INCOMING_FRAME_SP_OFFSET 4
/* All registers are live on exit from an interrupt routine. */
-#define EPILOGUE_USES(REGNO) \
- (reload_completed && m68k_interrupt_function_p (current_function_decl))
+#define EPILOGUE_USES(REGNO) \
+ (reload_completed \
+ && (m68k_get_function_kind (current_function_decl) \
+ == m68k_fk_interrupt_handler))
/* Describe how we implement __builtin_eh_return. */
#define EH_RETURN_DATA_REGNO(N) \
FPUTYPE_COLDFIRE
};
+enum m68k_function_kind
+{
+ m68k_fk_normal_function,
+ m68k_fk_interrupt_handler,
+ m68k_fk_interrupt_thread
+};
+
/* Variables in m68k.c; see there for details. */
extern const char *m68k_library_id_string;
extern int m68k_last_compare_had_fp_operands;
OSDN Git Service
