the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA. */
+/* The purpose of this file is to define the characteristics of the i386,
+ independent of assembler syntax or operating system.
+
+ Three other files build on this one to describe a specific assembler syntax:
+ bsd386.h, att386.h, and sun386.h.
+
+ The actual tm.h file for a particular system should include
+ this file, and then the file for the appropriate assembler syntax.
+
+ Many macros that specify assembler syntax are omitted entirely from
+ this file because they really belong in the files for particular
+ assemblers. These include RP, IP, LPREFIX, PUT_OP_SIZE, USE_STAR,
+ ADDR_BEG, ADDR_END, PRINT_IREG, PRINT_SCALE, PRINT_B_I_S, and many
+ that start with ASM_ or end in ASM_OP. */
+
+/* Redefines for option macros. */
+
+#define TARGET_64BIT OPTION_ISA_64BIT
+#define TARGET_MMX OPTION_ISA_MMX
+#define TARGET_3DNOW OPTION_ISA_3DNOW
+#define TARGET_3DNOW_A OPTION_ISA_3DNOW_A
+#define TARGET_SSE OPTION_ISA_SSE
+#define TARGET_SSE2 OPTION_ISA_SSE2
+#define TARGET_SSE3 OPTION_ISA_SSE3
+#define TARGET_SSSE3 OPTION_ISA_SSSE3
+#define TARGET_SSE4_1 OPTION_ISA_SSE4_1
+#define TARGET_SSE4_2 OPTION_ISA_SSE4_2
+#define TARGET_SSE4A OPTION_ISA_SSE4A
+
#include "config/vxworks-dummy.h"
/* Algorithm to expand string function with. */
loop,
unrolled_loop
};
+
#define NAX_STRINGOP_ALGS 4
+
/* Specify what algorithm to use for stringops on known size.
When size is unknown, the UNKNOWN_SIZE alg is used. When size is
known at compile time or estimated via feedback, the SIZE array
For example initializer:
{{256, loop}, {-1, rep_prefix_4_byte}}
will use loop for blocks smaller or equal to 256 bytes, rep prefix will
- be used otherwise.
-*/
+ be used otherwise. */
struct stringop_algs
{
const enum stringop_alg unknown_size;
} size [NAX_STRINGOP_ALGS];
};
-/* The purpose of this file is to define the characteristics of the i386,
- independent of assembler syntax or operating system.
-
- Three other files build on this one to describe a specific assembler syntax:
- bsd386.h, att386.h, and sun386.h.
-
- The actual tm.h file for a particular system should include
- this file, and then the file for the appropriate assembler syntax.
-
- Many macros that specify assembler syntax are omitted entirely from
- this file because they really belong in the files for particular
- assemblers. These include RP, IP, LPREFIX, PUT_OP_SIZE, USE_STAR,
- ADDR_BEG, ADDR_END, PRINT_IREG, PRINT_SCALE, PRINT_B_I_S, and many
- that start with ASM_ or end in ASM_OP. */
-
/* Define the specific costs for a given cpu */
struct processor_costs {
X86_TUNE_DEEP_BRANCH_PREDICTION,
X86_TUNE_BRANCH_PREDICTION_HINTS,
X86_TUNE_DOUBLE_WITH_ADD,
- X86_TUNE_USE_SAHF, /* && !TARGET_64BIT */
+ X86_TUNE_USE_SAHF,
X86_TUNE_MOVX,
X86_TUNE_PARTIAL_REG_STALL,
X86_TUNE_PARTIAL_FLAG_REG_STALL,
X86_TUNE_USE_INCDEC,
X86_TUNE_PAD_RETURNS,
X86_TUNE_EXT_80387_CONSTANTS,
+ X86_TUNE_SHORTEN_X87_SSE,
+ X86_TUNE_AVOID_VECTOR_DECODE,
+ X86_TUNE_PROMOTE_HIMODE_IMUL,
+ X86_TUNE_SLOW_IMUL_IMM32_MEM,
+ X86_TUNE_SLOW_IMUL_IMM8,
+ X86_TUNE_MOVE_M1_VIA_OR,
+ X86_TUNE_NOT_UNPAIRABLE,
+ X86_TUNE_NOT_VECTORMODE,
X86_TUNE_LAST
};
#define TARGET_PAD_RETURNS ix86_tune_features[X86_TUNE_PAD_RETURNS]
#define TARGET_EXT_80387_CONSTANTS \
ix86_tune_features[X86_TUNE_EXT_80387_CONSTANTS]
+#define TARGET_SHORTEN_X87_SSE ix86_tune_features[X86_TUNE_SHORTEN_X87_SSE]
+#define TARGET_AVOID_VECTOR_DECODE \
+ ix86_tune_features[X86_TUNE_AVOID_VECTOR_DECODE]
+#define TARGET_TUNE_PROMOTE_HIMODE_IMUL \
+ ix86_tune_features[X86_TUNE_PROMOTE_HIMODE_IMUL]
+#define TARGET_SLOW_IMUL_IMM32_MEM \
+ ix86_tune_features[X86_TUNE_SLOW_IMUL_IMM32_MEM]
+#define TARGET_SLOW_IMUL_IMM8 ix86_tune_features[X86_TUNE_SLOW_IMUL_IMM8]
+#define TARGET_MOVE_M1_VIA_OR ix86_tune_features[X86_TUNE_MOVE_M1_VIA_OR]
+#define TARGET_NOT_UNPAIRABLE ix86_tune_features[X86_TUNE_NOT_UNPAIRABLE]
+#define TARGET_NOT_VECTORMODE ix86_tune_features[X86_TUNE_NOT_VECTORMODE]
/* Feature tests against the various architecture variations. */
enum ix86_arch_indices {
#define TARGET_FISTTP (TARGET_SSE3 && TARGET_80387)
extern int x86_prefetch_sse;
-#define TARGET_PREFETCH_SSE x86_prefetch_sse
-extern int x86_cmpxchg16b;
+#define TARGET_ABM x86_abm
#define TARGET_CMPXCHG16B x86_cmpxchg16b
+#define TARGET_POPCNT x86_popcnt
+#define TARGET_PREFETCH_SSE x86_prefetch_sse
+#define TARGET_SAHF x86_sahf
+#define TARGET_RECIP x86_recip
#define ASSEMBLER_DIALECT (ix86_asm_dialect)
#define TARGET_ANY_GNU_TLS (TARGET_GNU_TLS || TARGET_GNU2_TLS)
#define TARGET_SUN_TLS (ix86_tls_dialect == TLS_DIALECT_SUN)
+extern int ix86_isa_flags;
+
#ifndef TARGET_64BIT_DEFAULT
#define TARGET_64BIT_DEFAULT 0
#endif
#define TARGET_TLS_DIRECT_SEG_REFS_DEFAULT 0
#endif
+/* Fence to use after loop using storent. */
+
+extern tree x86_mfence;
+#define FENCE_FOLLOWING_MOVNT x86_mfence
+
/* Once GDB has been enhanced to deal with functions without frame
pointers, we can change this to allow for elimination of
the frame pointer in leaf functions. */
#define TARGET_DEFAULT 0
+/* Extra bits to force. */
+#define TARGET_SUBTARGET_DEFAULT 0
+#define TARGET_SUBTARGET_ISA_DEFAULT 0
+
+/* Extra bits to force on w/ 32-bit mode. */
+#define TARGET_SUBTARGET32_DEFAULT 0
+#define TARGET_SUBTARGET32_ISA_DEFAULT 0
+
+/* Extra bits to force on w/ 64-bit mode. */
+#define TARGET_SUBTARGET64_DEFAULT 0
+#define TARGET_SUBTARGET64_ISA_DEFAULT 0
+
/* This is not really a target flag, but is done this way so that
it's analogous to similar code for Mach-O on PowerPC. darwin.h
redefines this to 1. */
#define TARGET_MACHO 0
+/* Likewise, for the Windows 64-bit ABI. */
+#define TARGET_64BIT_MS_ABI 0
+
/* Subtargets may reset this to 1 in order to enable 96-bit long double
with the rounding mode forced to 53 bits. */
#define TARGET_96_ROUND_53_LONG_DOUBLE 0
#ifndef CC1_CPU_SPEC
#define CC1_CPU_SPEC_1 "\
-%{!mtune*: \
-%{m386:mtune=i386 \
-%n`-m386' is deprecated. Use `-march=i386' or `-mtune=i386' instead.\n} \
-%{m486:-mtune=i486 \
-%n`-m486' is deprecated. Use `-march=i486' or `-mtune=i486' instead.\n} \
-%{mpentium:-mtune=pentium \
-%n`-mpentium' is deprecated. Use `-march=pentium' or `-mtune=pentium' instead.\n} \
-%{mpentiumpro:-mtune=pentiumpro \
-%n`-mpentiumpro' is deprecated. Use `-march=pentiumpro' or `-mtune=pentiumpro' instead.\n} \
%{mcpu=*:-mtune=%* \
-%n`-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.\n}} \
+%n`-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.\n} \
%<mcpu=* \
%{mintel-syntax:-masm=intel \
%n`-mintel-syntax' is deprecated. Use `-masm=intel' instead.\n} \
size_t arch_len = strlen (ix86_arch_string); \
size_t tune_len = strlen (ix86_tune_string); \
int last_arch_char = ix86_arch_string[arch_len - 1]; \
- int last_tune_char = ix86_tune_string[tune_len - 1]; \
+ int last_tune_char = ix86_tune_string[tune_len - 1]; \
\
if (TARGET_64BIT) \
{ \
builtin_define ("__SSE3__"); \
if (TARGET_SSSE3) \
builtin_define ("__SSSE3__"); \
- if (TARGET_SSE4A) \
+ if (TARGET_SSE4_1) \
+ builtin_define ("__SSE4_1__"); \
+ if (TARGET_SSE4_2) \
+ builtin_define ("__SSE4_2__"); \
+ if (TARGET_SSE4A) \
builtin_define ("__SSE4A__"); \
if (TARGET_SSE_MATH && TARGET_SSE) \
builtin_define ("__SSE_MATH__"); \
== (TARGET_64BIT ? 3 : 2)); \
} \
j = PIC_OFFSET_TABLE_REGNUM; \
- if (j != INVALID_REGNUM) \
+ if (j != INVALID_REGNUM) \
{ \
- fixed_regs[j] = 1; \
- call_used_regs[j] = 1; \
+ fixed_regs[j] = 1; \
+ call_used_regs[j] = 1; \
} \
if (! TARGET_MMX) \
{ \
for (i = FIRST_REX_SSE_REG; i <= LAST_REX_SSE_REG; i++) \
reg_names[i] = ""; \
} \
+ if (TARGET_64BIT_MS_ABI) \
+ { \
+ call_used_regs[4 /*RSI*/] = 0; \
+ call_used_regs[5 /*RDI*/] = 0; \
+ } \
} while (0)
/* Return number of consecutive hard regs needed starting at reg REGNO
GENERAL_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp %esp %r8 - %r15*/
FP_TOP_REG, FP_SECOND_REG, /* %st(0) %st(1) */
FLOAT_REGS,
+ SSE_FIRST_REG,
SSE_REGS,
MMX_REGS,
FP_TOP_SSE_REGS,
#define FLOAT_CLASS_P(CLASS) \
reg_class_subset_p ((CLASS), FLOAT_REGS)
#define SSE_CLASS_P(CLASS) \
- ((CLASS) == SSE_REGS)
+ reg_class_subset_p ((CLASS), SSE_REGS)
#define MMX_CLASS_P(CLASS) \
((CLASS) == MMX_REGS)
#define MAYBE_INTEGER_CLASS_P(CLASS) \
"GENERAL_REGS", \
"FP_TOP_REG", "FP_SECOND_REG", \
"FLOAT_REGS", \
+ "SSE_FIRST_REG", \
"SSE_REGS", \
"MMX_REGS", \
"FP_TOP_SSE_REGS", \
{ 0x1100ff, 0x1fe0 }, /* GENERAL_REGS */ \
{ 0x100, 0x0 }, { 0x0200, 0x0 },/* FP_TOP_REG, FP_SECOND_REG */\
{ 0xff00, 0x0 }, /* FLOAT_REGS */ \
+ { 0x200000, 0x0 }, /* SSE_FIRST_REG */ \
{ 0x1fe00000,0x1fe000 }, /* SSE_REGS */ \
{ 0xe0000000, 0x1f }, /* MMX_REGS */ \
{ 0x1fe00100,0x1fe000 }, /* FP_TOP_SSE_REG */ \
#define ANY_FP_REG_P(X) (REG_P (X) && ANY_FP_REGNO_P (REGNO (X)))
#define ANY_FP_REGNO_P(N) (FP_REGNO_P (N) || SSE_REGNO_P (N))
+#define X87_FLOAT_MODE_P(MODE) \
+ (TARGET_80387 && ((MODE) == SFmode || (MODE) == DFmode || (MODE) == XFmode))
+
#define SSE_REG_P(N) (REG_P (N) && SSE_REGNO_P (REGNO (N)))
#define SSE_REGNO_P(N) \
(IN_RANGE ((N), FIRST_SSE_REG, LAST_SSE_REG) \
(! IN_RANGE ((SRC), FIRST_STACK_REG, LAST_STACK_REG))
\f
-#define DLL_IMPORT_EXPORT_PREFIX '#'
-
#define FASTCALL_PREFIX '@'
\f
struct machine_function GTY(())
verify whether there's any such instruction live by testing that
REG_SP is live. */
#define ix86_current_function_calls_tls_descriptor \
- (ix86_tls_descriptor_calls_expanded_in_cfun && regs_ever_live[SP_REG])
+ (ix86_tls_descriptor_calls_expanded_in_cfun && df_regs_ever_live_p (SP_REG))
/* Control behavior of x86_file_start. */
#define X86_FILE_START_VERSION_DIRECTIVE false
#define SYMBOL_FLAG_FAR_ADDR (SYMBOL_FLAG_MACH_DEP << 0)
#define SYMBOL_REF_FAR_ADDR_P(X) \
((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_FAR_ADDR) != 0)
+
+/* Flags to mark dllimport/dllexport. Used by PE ports, but handy to
+ have defined always, to avoid ifdefing. */
+#define SYMBOL_FLAG_DLLIMPORT (SYMBOL_FLAG_MACH_DEP << 1)
+#define SYMBOL_REF_DLLIMPORT_P(X) \
+ ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_DLLIMPORT) != 0)
+
+#define SYMBOL_FLAG_DLLEXPORT (SYMBOL_FLAG_MACH_DEP << 2)
+#define SYMBOL_REF_DLLEXPORT_P(X) \
+ ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_DLLEXPORT) != 0)
+
/*
Local variables:
version-control: t
OSDN Git Service
