/* Definitions of target machine for GNU compiler, for DEC Alpha.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2004, 2005 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2004, 2005, 2007, 2008, 2009, 2010
+ Free Software Foundation, Inc.
Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu)
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/* Target CPU builtins. */
#define TARGET_CPU_CPP_BUILTINS() \
while (0)
#endif
+#define SWITCH_TAKES_ARG(CHAR) \
+ (DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G')
+
#define WORD_SWITCH_TAKES_ARG(STR) \
(!strcmp (STR, "rpath") || DEFAULT_WORD_SWITCH_TAKES_ARG(STR))
ALPHA_FPTM_SUI /* Software completion, w/underflow & inexact traps */
};
-extern int target_flags;
-
extern enum alpha_trap_precision alpha_tp;
extern enum alpha_fp_rounding_mode alpha_fprm;
extern enum alpha_fp_trap_mode alpha_fptm;
{"cpu", "%{!mcpu=*:-mcpu=%(VALUE)}" }, \
{"tune", "%{!mtune=*:-mtune=%(VALUE)}" }
-/* Sometimes certain combinations of command options do not make sense
- on a particular target machine. You can define a macro
- `OVERRIDE_OPTIONS' to take account of this. This macro, if
- defined, is executed once just after all the command options have
- been parsed.
-
- On the Alpha, it is used to translate target-option strings into
- numeric values. */
-
-#define OVERRIDE_OPTIONS override_options ()
-
/* Define this macro to change register usage conditional on target flags.
for (i = 32; i < 63; i++) \
fixed_regs[i] = call_used_regs[i] = 1; \
}
-
-
-/* Show we can debug even without a frame pointer. */
-#define CAN_DEBUG_WITHOUT_FP
\f
/* target machine storage layout */
/* Define the size of `long long'. The default is the twice the word size. */
#define LONG_LONG_TYPE_SIZE 64
-/* We're IEEE unless someone says to use VAX. */
-#define TARGET_FLOAT_FORMAT \
- (TARGET_FLOAT_VAX ? VAX_FLOAT_FORMAT : IEEE_FLOAT_FORMAT)
-
/* The two floating-point formats we support are S-floating, which is
4 bytes, and T-floating, which is 8 bytes. `float' is S and `double'
and `long double' are T. */
registers can hold 64-bit integers as well, but not smaller values. */
#define HARD_REGNO_MODE_OK(REGNO, MODE) \
- ((REGNO) >= 32 && (REGNO) <= 62 \
+ (IN_RANGE ((REGNO), 32, 62) \
? (MODE) == SFmode || (MODE) == DFmode || (MODE) == DImode \
|| (MODE) == SCmode || (MODE) == DCmode \
: 1)
/* Base register for access to local variables of the function. */
#define HARD_FRAME_POINTER_REGNUM 15
-/* Value should be nonzero if functions must have frame pointers.
- Zero means the frame pointer need not be set up (and parms
- may be accessed via the stack pointer) in functions that seem suitable.
- This is computed in `reload', in reload1.c. */
-#define FRAME_POINTER_REQUIRED 0
-
/* Base register for access to arguments of the function. */
#define ARG_POINTER_REGNUM 31
{0x00000000, 0x7fffffff}, /* FLOAT_REGS */ \
{0xffffffff, 0xffffffff} }
+/* The following macro defines cover classes for Integrated Register
+ Allocator. Cover classes is a set of non-intersected register
+ classes covering all hard registers used for register allocation
+ purpose. Any move between two registers of a cover class should be
+ cheaper than load or store of the registers. The macro value is
+ array of register classes with LIM_REG_CLASSES used as the end
+ marker. */
+
+#define IRA_COVER_CLASSES \
+{ \
+ GENERAL_REGS, FLOAT_REGS, LIM_REG_CLASSES \
+}
+
/* The same information, inverted:
Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
: (REGNO) == 24 ? R24_REG \
: (REGNO) == 25 ? R25_REG \
: (REGNO) == 27 ? R27_REG \
- : (REGNO) >= 32 && (REGNO) <= 62 ? FLOAT_REGS \
+ : IN_RANGE ((REGNO), 32, 62) ? FLOAT_REGS \
: GENERAL_REGS)
/* The class value for index registers, and the one for base regs. */
#define PREFERRED_RELOAD_CLASS alpha_preferred_reload_class
-/* Loading and storing HImode or QImode values to and from memory
- usually requires a scratch register. The exceptions are loading
- QImode and HImode from an aligned address to a general register
- unless byte instructions are permitted.
- We also cannot load an unaligned address or a paradoxical SUBREG into an
- FP register. */
-
-#define SECONDARY_INPUT_RELOAD_CLASS(CLASS,MODE,IN) \
- alpha_secondary_reload_class((CLASS), (MODE), (IN), 1)
-
-#define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS,MODE,OUT) \
- alpha_secondary_reload_class((CLASS), (MODE), (OUT), 0)
-
/* If we are copying between general and FP registers, we need a memory
location unless the FIX extension is available. */
#define MEMORY_MOVE_COST(MODE,CLASS,IN) (2*alpha_memory_latency)
/* Provide the cost of a branch. Exact meaning under development. */
-#define BRANCH_COST 5
+#define BRANCH_COST(speed_p, predictable_p) 5
\f
/* Stack layout; function entry, exit and calling. */
/* Define this if the maximum size of all the outgoing args is to be
accumulated and pushed during the prologue. The amount can be
- found in the variable current_function_outgoing_args_size. */
+ found in the variable crtl->outgoing_args_size. */
#define ACCUMULATE_OUTGOING_ARGS 1
/* Offset of first parameter from the argument pointer register value. */
{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
{ FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}}
-/* Given FROM and TO register numbers, say whether this elimination is allowed.
- Frame pointer elimination is automatically handled.
-
- All eliminations are valid since the cases where FP can't be
- eliminated are already handled. */
-
-#define CAN_ELIMINATE(FROM, TO) 1
-
/* Round up to a multiple of 16 bytes. */
#define ALPHA_ROUND(X) (((X) + 15) & ~ 15)
in a register. */
/* #define REG_PARM_STACK_SPACE */
-/* Value is the number of bytes of arguments automatically
- popped when returning from a subroutine call.
- FUNDECL is the declaration node of the function (as a tree),
- FUNTYPE is the data type of the function (as a tree),
- or for a library call it is an identifier node for the subroutine name.
- SIZE is the number of bytes of arguments passed on the stack. */
-
-#define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
-
/* Define how to find the value returned by a function.
VALTYPE is the data type of the value (as a tree).
If the precise function being called is known, FUNC is its FUNCTION_DECL;
On Alpha, these are $16-$21 and $f16-$f21. */
#define FUNCTION_ARG_REGNO_P(N) \
- (((N) >= 16 && (N) <= 21) || ((N) >= 16 + 32 && (N) <= 21 + 32))
+ (IN_RANGE ((N), 16, 21) || ((N) >= 16 + 32 && (N) <= 21 + 32))
\f
/* Define a data type for recording info about an argument list
during the scan of that argument list. This data type should
: (((MODE) == BLKmode ? int_size_in_bytes (TYPE) : GET_MODE_SIZE (MODE)) \
+ (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
-/* Update the data in CUM to advance over an argument
- of mode MODE and data type TYPE.
- (TYPE is null for libcalls where that information may not be available.) */
-
-#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
- ((CUM) += \
- (targetm.calls.must_pass_in_stack (MODE, TYPE)) \
- ? 6 : ALPHA_ARG_SIZE (MODE, TYPE, NAMED))
-
-/* Determine where to put an argument to a function.
- Value is zero to push the argument on the stack,
- or a hard register in which to store the argument.
-
- MODE is the argument's machine mode.
- TYPE is the data type of the argument (as a tree).
- This is null for libcalls where that information may
- not be available.
- CUM is a variable of type CUMULATIVE_ARGS which gives info about
- the preceding args and about the function being called.
- NAMED is nonzero if this argument is a named parameter
- (otherwise it is an extra parameter matching an ellipsis).
-
- On Alpha the first 6 words of args are normally in registers
- and the rest are pushed. */
-
-#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
- function_arg((CUM), (MODE), (TYPE), (NAMED))
-
-/* Try to output insns to set TARGET equal to the constant C if it can be
- done in less than N insns. Do all computations in MODE. Returns the place
- where the output has been placed if it can be done and the insns have been
- emitted. If it would take more than N insns, zero is returned and no
- insns and emitted. */
-
-/* Define the information needed to generate branch and scc insns. This is
- stored from the compare operation. Note that we can't use "rtx" here
- since it hasn't been defined! */
-
-struct alpha_compare
-{
- struct rtx_def *op0, *op1;
- int fp_p;
-};
-
-extern struct alpha_compare alpha_compare;
-
/* Make (or fake) .linkage entry for function call.
IS_LOCAL is 0 if name is used in call, 1 if name is used in definition. */
#define EPILOGUE_USES(REGNO) ((REGNO) == 26)
\f
-/* Output assembler code for a block containing the constant parts
- of a trampoline, leaving space for the variable parts.
-
- The trampoline should set the static chain pointer to value placed
- into the trampoline and should branch to the specified routine.
- Note that $27 has been set to the address of the trampoline, so we can
- use it for addressability of the two data items. */
-
-#define TRAMPOLINE_TEMPLATE(FILE) \
-do { \
- fprintf (FILE, "\tldq $1,24($27)\n"); \
- fprintf (FILE, "\tldq $27,16($27)\n"); \
- fprintf (FILE, "\tjmp $31,($27),0\n"); \
- fprintf (FILE, "\tnop\n"); \
- fprintf (FILE, "\t.quad 0,0\n"); \
-} while (0)
-
-/* Section in which to place the trampoline. On Alpha, instructions
- may only be placed in a text segment. */
-
-#define TRAMPOLINE_SECTION text_section
-
/* Length in units of the trampoline for entering a nested function. */
#define TRAMPOLINE_SIZE 32
#define TRAMPOLINE_ALIGNMENT 64
-/* Emit RTL insns to initialize the variable parts of a trampoline.
- FNADDR is an RTX for the address of the function's pure code.
- CXT is an RTX for the static chain value for the function. */
-
-#define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
- alpha_initialize_trampoline (TRAMP, FNADDR, CXT, 16, 24, 8)
-
/* A C expression whose value is RTL representing the value of the return
address for the frame COUNT steps up from the current frame.
FRAMEADDR is the frame pointer of the COUNT frame, or the frame pointer of
#define RETURN_ADDR_RTX alpha_return_addr
+/* Provide a definition of DWARF_FRAME_REGNUM here so that fallback unwinders
+ can use DWARF_ALT_FRAME_RETURN_COLUMN defined below. This is just the same
+ as the default definition in dwarf2out.c. */
+#undef DWARF_FRAME_REGNUM
+#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
+
/* Before the prologue, RA lives in $26. */
#define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, 26)
#define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (26)
#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 28)
#define EH_RETURN_HANDLER_RTX \
gen_rtx_MEM (Pmode, plus_constant (stack_pointer_rtx, \
- current_function_outgoing_args_size))
+ crtl->outgoing_args_size))
\f
/* Addressing modes, and classification of registers for them. */
symbolic addresses into registers. */
#define CONSTANT_ADDRESS_P(X) \
- (GET_CODE (X) == CONST_INT \
+ (CONST_INT_P (X) \
&& (unsigned HOST_WIDE_INT) (INTVAL (X) + 0x8000) < 0x10000)
/* Include all constant integers and constant doubles, but not
#define NONSTRICT_REG_OK_FP_BASE_P(X) \
(REGNO (X) == 31 || REGNO (X) == 63 \
|| (REGNO (X) >= FIRST_PSEUDO_REGISTER \
- && REGNO (X) < LAST_VIRTUAL_REGISTER))
+ && REGNO (X) < LAST_VIRTUAL_POINTER_REGISTER))
/* Nonzero if X is a hard reg that can be used as a base reg. */
#define STRICT_REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
#define REG_OK_FOR_BASE_P(X) NONSTRICT_REG_OK_FOR_BASE_P (X)
#endif
\f
-/* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression that is a
- valid memory address for an instruction. */
-
-#ifdef REG_OK_STRICT
-#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN) \
-do { \
- if (alpha_legitimate_address_p (MODE, X, 1)) \
- goto WIN; \
-} while (0)
-#else
-#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, WIN) \
-do { \
- if (alpha_legitimate_address_p (MODE, X, 0)) \
- goto WIN; \
-} while (0)
-#endif
-
-/* Try machine-dependent ways of modifying an illegitimate address
- to be legitimate. If we find one, return the new, valid address.
- This macro is used in only one place: `memory_address' in explow.c. */
-
-#define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
-do { \
- rtx new_x = alpha_legitimize_address (X, NULL_RTX, MODE); \
- if (new_x) \
- { \
- X = new_x; \
- goto WIN; \
- } \
-} while (0)
-
/* Try a machine-dependent way of reloading an illegitimate address
operand. If we find one, push the reload and jump to WIN. This
macro is used in only one place: `find_reloads_address' in reload.c. */
Without byte/word accesses, we want no more than four instructions;
with, several single byte accesses are better. */
-#define MOVE_RATIO (TARGET_BWX ? 7 : 2)
+#define MOVE_RATIO(speed) (TARGET_BWX ? 7 : 2)
/* Largest number of bytes of an object that can be placed in a register.
On the Alpha we have plenty of registers, so use TImode. */
#define CANONICALIZE_COMPARISON(CODE,OP0,OP1) \
do { \
if (((CODE) == GE || (CODE) == GT || (CODE) == GEU || (CODE) == GTU) \
- && (GET_CODE (OP1) == REG || (OP1) == const0_rtx)) \
+ && (REG_P (OP1) || (OP1) == const0_rtx)) \
{ \
rtx tem = (OP0); \
(OP0) = (OP1); \
(CODE) = swap_condition (CODE); \
} \
if (((CODE) == LT || (CODE) == LTU) \
- && GET_CODE (OP1) == CONST_INT && INTVAL (OP1) == 256) \
+ && CONST_INT_P (OP1) && INTVAL (OP1) == 256) \
{ \
(CODE) = (CODE) == LT ? LE : LEU; \
(OP1) = GEN_INT (255); \
#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
print_operand_address((FILE), (ADDR))
\f
-/* Implement `va_start' for varargs and stdarg. */
-#define EXPAND_BUILTIN_VA_START(valist, nextarg) \
- alpha_va_start (valist, nextarg)
-\f
/* Tell collect that the object format is ECOFF. */
#define OBJECT_FORMAT_COFF
#define EXTENDED_COFF
OSDN Git Service
