#include "toplev.h"
#include "target.h"
#include "rtlhooks-def.h"
+/* Include output.h for dump_file. */
+#include "output.h"
/* Number of attempts to combine instructions in this function. */
int last_set_label;
/* These fields are maintained in parallel with last_set_value and are
- used to store the mode in which the register was last set, te bits
+ used to store the mode in which the register was last set, the bits
that were known to be zero when it was last set, and the number of
sign bits copies it was known to have when it was last set. */
those blocks as starting points. */
static sbitmap refresh_blocks;
\f
+/* The following array records the insn_rtx_cost for every insn
+ in the instruction stream. */
+
+static int *uid_insn_cost;
+
+/* Length of the currently allocated uid_insn_cost array. */
+
+static int last_insn_cost;
+
/* Incremented for each label. */
static int label_tick;
{
/* Sanity check that we're replacing oldval with a CONST_INT
that is a valid sign-extension for the original mode. */
- if (INTVAL (newval) != trunc_int_for_mode (INTVAL (newval),
- GET_MODE (oldval)))
- abort ();
+ gcc_assert (INTVAL (newval)
+ == trunc_int_for_mode (INTVAL (newval), GET_MODE (oldval)));
/* Replacing the operand of a SUBREG or a ZERO_EXTEND with a
CONST_INT is not valid, because after the replacement, the
when do_SUBST is called to replace the operand thereof, so we
perform this test on oldval instead, checking whether an
invalid replacement took place before we got here. */
- if ((GET_CODE (oldval) == SUBREG
- && GET_CODE (SUBREG_REG (oldval)) == CONST_INT)
- || (GET_CODE (oldval) == ZERO_EXTEND
- && GET_CODE (XEXP (oldval, 0)) == CONST_INT))
- abort ();
+ gcc_assert (!(GET_CODE (oldval) == SUBREG
+ && GET_CODE (SUBREG_REG (oldval)) == CONST_INT));
+ gcc_assert (!(GET_CODE (oldval) == ZERO_EXTEND
+ && GET_CODE (XEXP (oldval, 0)) == CONST_INT));
}
if (undobuf.frees)
#define SUBST_INT(INTO, NEWVAL) do_SUBST_INT(&(INTO), (NEWVAL))
\f
+/* Subroutine of try_combine. Determine whether the combine replacement
+ patterns NEWPAT and NEWI2PAT are cheaper according to insn_rtx_cost
+ that the original instruction sequence I1, I2 and I3. Note that I1
+ and/or NEWI2PAT may be NULL_RTX. This function returns false, if the
+ costs of all instructions can be estimated, and the replacements are
+ more expensive than the original sequence. */
+
+static bool
+combine_validate_cost (rtx i1, rtx i2, rtx i3, rtx newpat, rtx newi2pat)
+{
+ int i1_cost, i2_cost, i3_cost;
+ int new_i2_cost, new_i3_cost;
+ int old_cost, new_cost;
+
+ /* Lookup the original insn_rtx_costs. */
+ i2_cost = INSN_UID (i2) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i2)] : 0;
+ i3_cost = INSN_UID (i3) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i3)] : 0;
+
+ if (i1)
+ {
+ i1_cost = INSN_UID (i1) <= last_insn_cost
+ ? uid_insn_cost[INSN_UID (i1)] : 0;
+ old_cost = (i1_cost > 0 && i2_cost > 0 && i3_cost > 0)
+ ? i1_cost + i2_cost + i3_cost : 0;
+ }
+ else
+ {
+ old_cost = (i2_cost > 0 && i3_cost > 0) ? i2_cost + i3_cost : 0;
+ i1_cost = 0;
+ }
+
+ /* Calculate the replacement insn_rtx_costs. */
+ new_i3_cost = insn_rtx_cost (newpat);
+ if (newi2pat)
+ {
+ new_i2_cost = insn_rtx_cost (newi2pat);
+ new_cost = (new_i2_cost > 0 && new_i3_cost > 0)
+ ? new_i2_cost + new_i3_cost : 0;
+ }
+ else
+ {
+ new_cost = new_i3_cost;
+ new_i2_cost = 0;
+ }
+
+ /* Disallow this recombination if both new_cost and old_cost are
+ greater than zero, and new_cost is greater than old cost. */
+ if (!undobuf.other_insn
+ && old_cost > 0
+ && new_cost > old_cost)
+ {
+ if (dump_file)
+ {
+ if (i1)
+ {
+ fprintf (dump_file,
+ "rejecting combination of insns %d, %d and %d\n",
+ INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
+ fprintf (dump_file, "original costs %d + %d + %d = %d\n",
+ i1_cost, i2_cost, i3_cost, old_cost);
+ }
+ else
+ {
+ fprintf (dump_file,
+ "rejecting combination of insns %d and %d\n",
+ INSN_UID (i2), INSN_UID (i3));
+ fprintf (dump_file, "original costs %d + %d = %d\n",
+ i2_cost, i3_cost, old_cost);
+ }
+
+ if (newi2pat)
+ {
+ fprintf (dump_file, "replacement costs %d + %d = %d\n",
+ new_i2_cost, new_i3_cost, new_cost);
+ }
+ else
+ fprintf (dump_file, "replacement cost %d\n", new_cost);
+ }
+
+ return false;
+ }
+
+ /* Update the uid_insn_cost array with the replacement costs. */
+ uid_insn_cost[INSN_UID (i2)] = new_i2_cost;
+ uid_insn_cost[INSN_UID (i3)] = new_i3_cost;
+ if (i1)
+ uid_insn_cost[INSN_UID (i1)] = 0;
+
+ return true;
+}
+\f
/* Main entry point for combiner. F is the first insn of the function.
NREGS is the first unused pseudo-reg number.
refresh_blocks = sbitmap_alloc (last_basic_block);
sbitmap_zero (refresh_blocks);
+ /* Allocate array of current insn_rtx_costs. */
+ uid_insn_cost = xcalloc (max_uid_cuid + 1, sizeof (int));
+ last_insn_cost = max_uid_cuid;
+
for (insn = f, i = 0; insn; insn = NEXT_INSN (insn))
{
uid_cuid[INSN_UID (insn)] = ++i;
set_nonzero_bits_and_sign_copies (XEXP (links, 0), NULL_RTX,
NULL);
#endif
+
+ /* Record the current insn_rtx_cost of this instruction. */
+ if (NONJUMP_INSN_P (insn))
+ uid_insn_cost[INSN_UID (insn)] = insn_rtx_cost (PATTERN (insn));
+ if (dump_file)
+ fprintf(dump_file, "insn_cost %d: %d\n",
+ INSN_UID (insn), uid_insn_cost[INSN_UID (insn)]);
}
- if (GET_CODE (insn) == CODE_LABEL)
+ if (LABEL_P (insn))
label_tick++;
}
{
next = 0;
- if (GET_CODE (insn) == CODE_LABEL)
+ if (LABEL_P (insn))
label_tick++;
else if (INSN_P (insn))
/* If the linked insn has been replaced by a note, then there
is no point in pursuing this chain any further. */
- if (GET_CODE (link) == NOTE)
+ if (NOTE_P (link))
continue;
for (nextlinks = LOG_LINKS (link);
We need this special code because data flow connections
via CC0 do not get entered in LOG_LINKS. */
- if (GET_CODE (insn) == JUMP_INSN
+ if (JUMP_P (insn)
&& (prev = prev_nonnote_insn (insn)) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev)))
{
if ((next = try_combine (insn, prev,
}
/* Do the same for an insn that explicitly references CC0. */
- if (GET_CODE (insn) == INSN
+ if (NONJUMP_INSN_P (insn)
&& (prev = prev_nonnote_insn (insn)) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev))
&& GET_CODE (PATTERN (insn)) == SET
&& reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (insn))))
explicitly references CC0. If so, try this insn, that insn,
and its predecessor if it sets CC0. */
for (links = LOG_LINKS (insn); links; links = XEXP (links, 1))
- if (GET_CODE (XEXP (links, 0)) == INSN
+ if (NONJUMP_INSN_P (XEXP (links, 0))
&& GET_CODE (PATTERN (XEXP (links, 0))) == SET
&& reg_mentioned_p (cc0_rtx, SET_SRC (PATTERN (XEXP (links, 0))))
&& (prev = prev_nonnote_insn (XEXP (links, 0))) != 0
- && GET_CODE (prev) == INSN
+ && NONJUMP_INSN_P (prev)
&& sets_cc0_p (PATTERN (prev))
&& (next = try_combine (insn, XEXP (links, 0),
prev, &new_direct_jump_p)) != 0)
}
}
- if (GET_CODE (insn) != NOTE)
+ if (!NOTE_P (insn))
record_dead_and_set_regs (insn);
retry:
/* Clean up. */
sbitmap_free (refresh_blocks);
+ free (uid_insn_cost);
free (reg_stat);
free (uid_cuid);
/* Can't merge a function call. */
|| GET_CODE (src) == CALL
/* Don't eliminate a function call argument. */
- || (GET_CODE (i3) == CALL_INSN
+ || (CALL_P (i3)
&& (find_reg_fusage (i3, USE, dest)
|| (REG_P (dest)
&& REGNO (dest) < FIRST_PSEUDO_REGISTER
/* Don't substitute into an incremented register. */
|| FIND_REG_INC_NOTE (i3, dest)
|| (succ && FIND_REG_INC_NOTE (succ, dest))
+ /* Don't substitute into a non-local goto, this confuses CFG. */
+ || (JUMP_P (i3) && find_reg_note (i3, REG_NON_LOCAL_GOTO, NULL_RTX))
#if 0
/* Don't combine the end of a libcall into anything. */
/* ??? This gives worse code, and appears to be unnecessary, since no
are intervening stores. Also, don't move a volatile asm or
UNSPEC_VOLATILE across any other insns. */
|| (! all_adjacent
- && (((GET_CODE (src) != MEM
+ && (((!MEM_P (src)
|| ! find_reg_note (insn, REG_EQUIV, src))
&& use_crosses_set_p (src, INSN_CUID (insn)))
|| (GET_CODE (src) == ASM_OPERANDS && MEM_VOLATILE_P (src))
if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER)
{
/* Don't substitute for a register intended as a clobberable
- operand. */
+ operand. */
rtx reg = XEXP (XVECEXP (PATTERN (i3), 0, i), 0);
if (rtx_equal_p (reg, dest))
return 0;
#ifdef AUTO_INC_DEC
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_INC
- && (GET_CODE (i3) == JUMP_INSN
+ && (JUMP_P (i3)
|| reg_used_between_p (XEXP (link, 0), insn, i3)
|| reg_overlap_mentioned_p (XEXP (link, 0), PATTERN (i3))))
return 0;
but that would be much slower, and this ought to be equivalent. */
p = prev_nonnote_insn (insn);
- if (p && p != pred && GET_CODE (p) == INSN && sets_cc0_p (PATTERN (p))
+ if (p && p != pred && NONJUMP_INSN_P (p) && sets_cc0_p (PATTERN (p))
&& ! all_adjacent)
return 0;
#endif
into the address of a MEM, so only prevent the combination if
i1 or i2 set the same MEM. */
if ((inner_dest != dest &&
- (GET_CODE (inner_dest) != MEM
+ (!MEM_P (inner_dest)
|| rtx_equal_p (i2dest, inner_dest)
|| (i1dest && rtx_equal_p (i1dest, inner_dest)))
&& (reg_overlap_mentioned_p (i2dest, inner_dest)
int i3_subst_into_i2 = 0;
/* Notes that I1, I2 or I3 is a MULT operation. */
int have_mult = 0;
+ int swap_i2i3 = 0;
int maxreg;
rtx temp;
where I2 and I3 are adjacent to avoid making difficult register
usage tests. */
- if (i1 == 0 && GET_CODE (i3) == INSN && GET_CODE (PATTERN (i3)) == SET
+ if (i1 == 0 && NONJUMP_INSN_P (i3) && GET_CODE (PATTERN (i3)) == SET
&& REG_P (SET_SRC (PATTERN (i3)))
&& REGNO (SET_SRC (PATTERN (i3))) >= FIRST_PSEUDO_REGISTER
&& find_reg_note (i3, REG_DEAD, SET_SRC (PATTERN (i3)))
{
/* We don't handle the case of the target word being wider
than a host wide int. */
- if (HOST_BITS_PER_WIDE_INT < BITS_PER_WORD)
- abort ();
+ gcc_assert (HOST_BITS_PER_WIDE_INT >= BITS_PER_WORD);
lo &= ~(UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD (1) - 1);
lo |= (INTVAL (SET_SRC (PATTERN (i3)))
else
/* We don't handle the case of the higher word not fitting
entirely in either hi or lo. */
- abort ();
+ gcc_unreachable ();
combine_merges++;
subst_insn = i3;
#if 0
if (!(GET_CODE (PATTERN (i3)) == SET
&& REG_P (SET_SRC (PATTERN (i3)))
- && GET_CODE (SET_DEST (PATTERN (i3))) == MEM
+ && MEM_P (SET_DEST (PATTERN (i3)))
&& (GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_INC
|| GET_CODE (XEXP (SET_DEST (PATTERN (i3)), 0)) == POST_DEC)))
/* It's not the exception. */
#ifdef INSN_SCHEDULING
/* If *SPLIT is a paradoxical SUBREG, when we split it, it should
be written as a ZERO_EXTEND. */
- if (split_code == SUBREG && GET_CODE (SUBREG_REG (*split)) == MEM)
+ if (split_code == SUBREG && MEM_P (SUBREG_REG (*split)))
{
#ifdef LOAD_EXTEND_OP
/* Or as a SIGN_EXTEND if LOAD_EXTEND_OP says that that's
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
if (insn_code_number >= 0)
- {
- rtx insn;
- rtx link;
-
- /* If we will be able to accept this, we have made a change to the
- destination of I3. This requires us to do a few adjustments. */
- PATTERN (i3) = newpat;
- adjust_for_new_dest (i3);
-
- /* I3 now uses what used to be its destination and which is
- now I2's destination. That means we need a LOG_LINK from
- I3 to I2. But we used to have one, so we still will.
-
- However, some later insn might be using I2's dest and have
- a LOG_LINK pointing at I3. We must remove this link.
- The simplest way to remove the link is to point it at I1,
- which we know will be a NOTE. */
-
- for (insn = NEXT_INSN (i3);
- insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
- || insn != BB_HEAD (this_basic_block->next_bb));
- insn = NEXT_INSN (insn))
- {
- if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
- {
- for (link = LOG_LINKS (insn); link;
- link = XEXP (link, 1))
- if (XEXP (link, 0) == i3)
- XEXP (link, 0) = i1;
-
- break;
- }
- }
- }
+ swap_i2i3 = 1;
}
/* Similarly, check for a case where we have a PARALLEL of two independent
they are adjacent to each other or not. */
{
rtx p = prev_nonnote_insn (i3);
- if (p && p != i2 && GET_CODE (p) == INSN && newi2pat
+ if (p && p != i2 && NONJUMP_INSN_P (p) && newi2pat
&& sets_cc0_p (newi2pat))
{
undo_all ();
}
#endif
+ /* Only allow this combination if insn_rtx_costs reports that the
+ replacement instructions are cheaper than the originals. */
+ if (!combine_validate_cost (i1, i2, i3, newpat, newi2pat))
+ {
+ undo_all ();
+ return 0;
+ }
+
/* We now know that we can do this combination. Merge the insns and
update the status of registers and LOG_LINKS. */
+ if (swap_i2i3)
+ {
+ rtx insn;
+ rtx link;
+ rtx ni2dest;
+
+ /* I3 now uses what used to be its destination and which is now
+ I2's destination. This requires us to do a few adjustments. */
+ PATTERN (i3) = newpat;
+ adjust_for_new_dest (i3);
+
+ /* We need a LOG_LINK from I3 to I2. But we used to have one,
+ so we still will.
+
+ However, some later insn might be using I2's dest and have
+ a LOG_LINK pointing at I3. We must remove this link.
+ The simplest way to remove the link is to point it at I1,
+ which we know will be a NOTE. */
+
+ /* newi2pat is usually a SET here; however, recog_for_combine might
+ have added some clobbers. */
+ if (GET_CODE (newi2pat) == PARALLEL)
+ ni2dest = SET_DEST (XVECEXP (newi2pat, 0, 0));
+ else
+ ni2dest = SET_DEST (newi2pat);
+
+ for (insn = NEXT_INSN (i3);
+ insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
+ || insn != BB_HEAD (this_basic_block->next_bb));
+ insn = NEXT_INSN (insn))
+ {
+ if (INSN_P (insn) && reg_referenced_p (ni2dest, PATTERN (insn)))
+ {
+ for (link = LOG_LINKS (insn); link;
+ link = XEXP (link, 1))
+ if (XEXP (link, 0) == i3)
+ XEXP (link, 0) = i1;
+
+ break;
+ }
+ }
+ }
+
{
rtx i3notes, i2notes, i1notes = 0;
rtx i3links, i2links, i1links = 0;
INSN_CODE (i3) = insn_code_number;
PATTERN (i3) = newpat;
- if (GET_CODE (i3) == CALL_INSN && CALL_INSN_FUNCTION_USAGE (i3))
+ if (CALL_P (i3) && CALL_INSN_FUNCTION_USAGE (i3))
{
rtx call_usage = CALL_INSN_FUNCTION_USAGE (i3);
PATTERN (i2) = newi2pat;
}
else
- {
- PUT_CODE (i2, NOTE);
- NOTE_LINE_NUMBER (i2) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (i2) = 0;
- }
+ SET_INSN_DELETED (i2);
if (i1)
{
LOG_LINKS (i1) = 0;
REG_NOTES (i1) = 0;
- PUT_CODE (i1, NOTE);
- NOTE_LINE_NUMBER (i1) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (i1) = 0;
+ SET_INSN_DELETED (i1);
}
/* Get death notes for everything that is now used in either I3 or
mark_jump_label (PATTERN (i3), i3, 0);
if ((temp = next_nonnote_insn (i3)) == NULL_RTX
- || GET_CODE (temp) != BARRIER)
+ || !BARRIER_P (temp))
emit_barrier_after (i3);
}
*new_direct_jump_p = 1;
if ((temp = next_nonnote_insn (undobuf.other_insn)) == NULL_RTX
- || GET_CODE (temp) != BARRIER)
+ || !BARRIER_P (temp))
emit_barrier_after (undobuf.other_insn);
}
#ifdef INSN_SCHEDULING
/* If we are making a paradoxical SUBREG invalid, it becomes a split
point. */
- if (GET_CODE (SUBREG_REG (x)) == MEM)
+ if (MEM_P (SUBREG_REG (x)))
return loc;
#endif
return find_split_point (&SUBREG_REG (x), insn);
if (seq
&& NEXT_INSN (seq) != NULL_RTX
&& NEXT_INSN (NEXT_INSN (seq)) == NULL_RTX
- && GET_CODE (seq) == INSN
+ && NONJUMP_INSN_P (seq)
&& GET_CODE (PATTERN (seq)) == SET
&& SET_DEST (PATTERN (seq)) == reg
&& ! reg_mentioned_p (reg,
SET_SRC (PATTERN (seq)))
- && GET_CODE (NEXT_INSN (seq)) == INSN
+ && NONJUMP_INSN_P (NEXT_INSN (seq))
&& GET_CODE (PATTERN (NEXT_INSN (seq))) == SET
&& SET_DEST (PATTERN (NEXT_INSN (seq))) == reg
&& memory_address_p (GET_MODE (x),
{
x = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
new, GET_MODE (XEXP (x, 0)));
- if (! x)
- abort ();
+ gcc_assert (x);
}
else
SUBST (XEXP (x, i), new);
/* Don't change the mode of the MEM if that would change the meaning
of the address. */
- if (GET_CODE (SUBREG_REG (x)) == MEM
+ if (MEM_P (SUBREG_REG (x))
&& (MEM_VOLATILE_P (SUBREG_REG (x))
|| mode_dependent_address_p (XEXP (SUBREG_REG (x), 0))))
return gen_rtx_CLOBBER (mode, const0_rtx);
rtx op1 = XEXP (x, 1);
int len;
- if (GET_CODE (op1) != PARALLEL)
- abort ();
+ gcc_assert (GET_CODE (op1) == PARALLEL);
len = XVECLEN (op1, 0);
if (len == 1
&& GET_CODE (XVECEXP (op1, 0, 0)) == CONST_INT
rtx f = make_compound_operation (false_rtx, SET);
rtx cond_op0 = XEXP (cond, 0);
rtx cond_op1 = XEXP (cond, 1);
- enum rtx_code op = NIL, extend_op = NIL;
+ enum rtx_code op = UNKNOWN, extend_op = UNKNOWN;
enum machine_mode m = mode;
rtx z = 0, c1 = NULL_RTX;
temp = subst (temp, pc_rtx, pc_rtx, 0, 0);
temp = gen_binary (op, m, gen_lowpart (m, z), temp);
- if (extend_op != NIL)
+ if (extend_op != UNKNOWN)
temp = simplify_gen_unary (extend_op, mode, temp, m);
return temp;
if (GET_CODE (src) == COMPARE)
op0 = XEXP (src, 0), op1 = XEXP (src, 1);
else
- op0 = src, op1 = const0_rtx;
+ op0 = src, op1 = CONST0_RTX (GET_MODE (src));
tmp = simplify_relational_operation (old_code, compare_mode, VOIDmode,
op0, op1);
zero_extend to avoid the reload that would otherwise be required. */
if (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)
- && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != NIL
+ && LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != UNKNOWN
&& SUBREG_BYTE (src) == 0
&& (GET_MODE_SIZE (GET_MODE (src))
> GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
- && GET_CODE (SUBREG_REG (src)) == MEM)
+ && MEM_P (SUBREG_REG (src)))
{
SUBST (SET_SRC (x),
gen_rtx_fmt_e (LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))),
break;
default:
- abort ();
+ gcc_unreachable ();
}
return x;
The subreg adds or removes high bits; its mode is
irrelevant to the meaning of this extraction,
since POS and LEN count from the lsb. */
- if (GET_CODE (SUBREG_REG (inner)) == MEM)
+ if (MEM_P (SUBREG_REG (inner)))
is_mode = GET_MODE (SUBREG_REG (inner));
inner = SUBREG_REG (inner);
}
if (tmode != BLKmode
&& ! (spans_byte && inner_mode != tmode)
&& ((pos_rtx == 0 && (pos % BITS_PER_WORD) == 0
- && GET_CODE (inner) != MEM
+ && !MEM_P (inner)
&& (! in_dest
|| (REG_P (inner)
&& have_insn_for (STRICT_LOW_PART, tmode))))
- || (GET_CODE (inner) == MEM && pos_rtx == 0
+ || (MEM_P (inner) && pos_rtx == 0
&& (pos
% (STRICT_ALIGNMENT ? GET_MODE_ALIGNMENT (tmode)
: BITS_PER_UNIT)) == 0
If INNER is not a MEM, get a piece consisting of just the field
of interest (in this case POS % BITS_PER_WORD must be 0). */
- if (GET_CODE (inner) == MEM)
+ if (MEM_P (inner))
{
HOST_WIDE_INT offset;
make a STRICT_LOW_PART unless we made a MEM. */
if (in_dest)
- return (GET_CODE (new) == MEM ? new
+ return (MEM_P (new) ? new
: (GET_CODE (new) != SUBREG
? gen_rtx_CLOBBER (tmode, const0_rtx)
: gen_rtx_STRICT_LOW_PART (VOIDmode, new)));
length is not 1. In all other cases, we would only be going outside
our object in cases when an original shift would have been
undefined. */
- if (! spans_byte && GET_CODE (inner) == MEM
+ if (! spans_byte && MEM_P (inner)
&& ((pos_rtx == 0 && pos + len > GET_MODE_BITSIZE (is_mode))
|| (pos_rtx != 0 && len != 1)))
return 0;
/* If this is not from memory, the desired mode is wanted_inner_reg_mode;
if we have to change the mode of memory and cannot, the desired mode is
EXTRACTION_MODE. */
- if (GET_CODE (inner) != MEM)
+ if (!MEM_P (inner))
wanted_inner_mode = wanted_inner_reg_mode;
else if (inner_mode != wanted_inner_mode
&& (mode_dependent_address_p (XEXP (inner, 0))
If it's a MEM we need to recompute POS relative to that.
However, if we're extracting from (or inserting into) a register,
we want to recompute POS relative to wanted_inner_mode. */
- int width = (GET_CODE (inner) == MEM
+ int width = (MEM_P (inner)
? GET_MODE_BITSIZE (is_mode)
: GET_MODE_BITSIZE (wanted_inner_mode));
pos_rtx
= gen_rtx_MINUS (GET_MODE (pos_rtx), GEN_INT (width - len), pos_rtx);
/* POS may be less than 0 now, but we check for that below.
- Note that it can only be less than 0 if GET_CODE (inner) != MEM. */
+ Note that it can only be less than 0 if !MEM_P (inner). */
}
/* If INNER has a wider mode, make it smaller. If this is a constant
the value. */
if (wanted_inner_mode != VOIDmode
&& GET_MODE_SIZE (wanted_inner_mode) < GET_MODE_SIZE (is_mode)
- && ((GET_CODE (inner) == MEM
+ && ((MEM_P (inner)
&& (inner_mode == wanted_inner_mode
|| (! mode_dependent_address_p (XEXP (inner, 0))
&& ! MEM_VOLATILE_P (inner))))))
/* If INNER is not memory, we can always get it into the proper mode. If we
are changing its mode, POS must be a constant and smaller than the size
of the new mode. */
- else if (GET_CODE (inner) != MEM)
+ else if (!MEM_P (inner))
{
if (GET_MODE (inner) != wanted_inner_mode
&& (pos_rtx != 0
&& (GET_MODE_MASK (GET_MODE (x)) & ~mask) == 0)
return gen_lowpart (mode, x);
- /* If we aren't changing the mode, X is not a SUBREG, and all zero bits in
- MASK are already known to be zero in X, we need not do anything. */
- if (GET_MODE (x) == mode && code != SUBREG && (~mask & nonzero) == 0)
- return x;
-
switch (code)
{
case CLOBBER:
/* We can only change the mode of the shift if we can do arithmetic
in the mode of the shift and INNER_MASK is no wider than the
- width of OP_MODE. */
- if (GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT
- || (inner_mask & ~GET_MODE_MASK (op_mode)) != 0)
+ width of X's mode. */
+ if ((inner_mask & ~GET_MODE_MASK (GET_MODE (x))) != 0)
op_mode = GET_MODE (x);
inner = force_to_mode (inner, op_mode, inner_mask, reg, next_select);
in STORE_FLAG_VALUE and FOO has a single bit that might be nonzero,
which is equal to STORE_FLAG_VALUE. */
if ((mask & ~STORE_FLAG_VALUE) == 0 && XEXP (x, 1) == const0_rtx
+ && GET_MODE (XEXP (x, 0)) == mode
&& exact_log2 (nonzero_bits (XEXP (x, 0), mode)) >= 0
&& (nonzero_bits (XEXP (x, 0), mode)
== (unsigned HOST_WIDE_INT) STORE_FLAG_VALUE))
/* Check for a paradoxical SUBREG of a MEM compared with the MEM.
Note that all SUBREGs of MEM are paradoxical; otherwise they
would have been rewritten. */
- if (GET_CODE (x) == MEM && GET_CODE (y) == SUBREG
- && GET_CODE (SUBREG_REG (y)) == MEM
+ if (MEM_P (x) && GET_CODE (y) == SUBREG
+ && MEM_P (SUBREG_REG (y))
&& rtx_equal_p (SUBREG_REG (y),
gen_lowpart (GET_MODE (SUBREG_REG (y)), x)))
return 1;
- if (GET_CODE (y) == MEM && GET_CODE (x) == SUBREG
- && GET_CODE (SUBREG_REG (x)) == MEM
+ if (MEM_P (y) && GET_CODE (x) == SUBREG
+ && MEM_P (SUBREG_REG (x))
&& rtx_equal_p (SUBREG_REG (x),
gen_lowpart (GET_MODE (SUBREG_REG (x)), y)))
return 1;
the width of this mode matter. It is assumed that the width of this mode
is smaller than or equal to HOST_BITS_PER_WIDE_INT.
- If *POP0 or OP1 are NIL, it means no operation is required. Only NEG, PLUS,
+ If *POP0 or OP1 are UNKNOWN, it means no operation is required. Only NEG, PLUS,
IOR, XOR, and AND are supported. We may set *POP0 to SET if the proper
result is simply *PCONST0.
if (op0 == AND)
const1 &= const0;
- /* If OP0 or OP1 is NIL, this is easy. Similarly if they are the same or
+ /* If OP0 or OP1 is UNKNOWN, this is easy. Similarly if they are the same or
if OP0 is SET. */
- if (op1 == NIL || op0 == SET)
+ if (op1 == UNKNOWN || op0 == SET)
return 1;
- else if (op0 == NIL)
+ else if (op0 == UNKNOWN)
op0 = op1, const0 = const1;
else if (op0 == op1)
const0 += const1;
break;
case NEG:
- op0 = NIL;
+ op0 = UNKNOWN;
break;
default:
break;
const0 &= GET_MODE_MASK (mode);
if (const0 == 0
&& (op0 == IOR || op0 == XOR || op0 == PLUS))
- op0 = NIL;
+ op0 = UNKNOWN;
else if (const0 == 0 && op0 == AND)
op0 = SET;
else if ((unsigned HOST_WIDE_INT) const0 == GET_MODE_MASK (mode)
&& op0 == AND)
- op0 = NIL;
+ op0 = UNKNOWN;
/* ??? Slightly redundant with the above mask, but not entirely.
Moving this above means we'd have to sign-extend the mode mask
unsigned int mode_words
= (GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD;
/* We form (outer_op (code varop count) (outer_const)). */
- enum rtx_code outer_op = NIL;
+ enum rtx_code outer_op = UNKNOWN;
HOST_WIDE_INT outer_const = 0;
rtx const_rtx;
int complement_p = 0;
varop = XEXP (varop, 0);
continue;
}
+
+ /* Check for 'PLUS signbit', which is the canonical form of 'XOR
+ signbit', and attempt to change the PLUS to an XOR and move it to
+ the outer operation as is done above in the AND/IOR/XOR case
+ leg for shift(logical). See details in logical handling above
+ for reasoning in doing so. */
+ if (code == LSHIFTRT
+ && GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && mode_signbit_p (result_mode, XEXP (varop, 1))
+ && (new = simplify_binary_operation (code, result_mode,
+ XEXP (varop, 1),
+ GEN_INT (count))) != 0
+ && GET_CODE (new) == CONST_INT
+ && merge_outer_ops (&outer_op, &outer_const, XOR,
+ INTVAL (new), result_mode, &complement_p))
+ {
+ varop = XEXP (varop, 0);
+ continue;
+ }
+
break;
case MINUS:
/* We have now finished analyzing the shift. The result should be
a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
- OUTER_OP is non-NIL, it is an operation that needs to be applied
+ OUTER_OP is non-UNKNOWN, it is an operation that needs to be applied
to the result of the shift. OUTER_CONST is the relevant constant,
but we must turn off all bits turned off in the shift.
for the outer operation. So try to do the simplification
recursively. */
- if (outer_op != NIL && GET_CODE (x) == code
+ if (outer_op != UNKNOWN && GET_CODE (x) == code
&& GET_CODE (XEXP (x, 1)) == CONST_INT)
x = simplify_shift_const (x, code, shift_mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
if (complement_p)
x = simplify_gen_unary (NOT, result_mode, x, result_mode);
- if (outer_op != NIL)
+ if (outer_op != UNKNOWN)
{
if (GET_MODE_BITSIZE (result_mode) < HOST_BITS_PER_WIDE_INT)
outer_const = trunc_int_for_mode (outer_const, result_mode);
/* X might be a paradoxical (subreg (mem)). In that case, gen_lowpart
won't know what to do. So we will strip off the SUBREG here and
process normally. */
- if (GET_CODE (x) == SUBREG && GET_CODE (SUBREG_REG (x)) == MEM)
+ if (GET_CODE (x) == SUBREG && MEM_P (SUBREG_REG (x)))
{
x = SUBREG_REG (x);
if (GET_MODE (x) == mode)
result = gen_lowpart_common (mode, x);
#ifdef CANNOT_CHANGE_MODE_CLASS
- if (result != 0
- && GET_CODE (result) == SUBREG
- && REG_P (SUBREG_REG (result))
- && REGNO (SUBREG_REG (result)) >= FIRST_PSEUDO_REGISTER)
- bitmap_set_bit (&subregs_of_mode, REGNO (SUBREG_REG (result))
- * MAX_MACHINE_MODE
- + GET_MODE (result));
+ if (result != 0 && GET_CODE (result) == SUBREG)
+ record_subregs_of_mode (result);
#endif
if (result)
return result;
- if (GET_CODE (x) == MEM)
+ if (MEM_P (x))
{
int offset = 0;
break;
case GEU:
- /* >= C is equivalent to < (C - 1). */
+ /* >= C is equivalent to > (C - 1). */
if (const_op > 1)
{
const_op -= 1;
those bits.
3. SUBREG_REG (op0) is a memory and LOAD_EXTEND_OP is defined and not
- NIL. In that case we know those bits are zeros or ones. We must
+ UNKNOWN. In that case we know those bits are zeros or ones. We must
also be sure that they are the same as the upper bits of op1.
We can never remove a SUBREG for a non-equality comparison because
else
record_value_for_reg (dest, record_dead_insn, NULL_RTX);
}
- else if (GET_CODE (dest) == MEM
+ else if (MEM_P (dest)
/* Ignore pushes, they clobber nothing. */
&& ! push_operand (dest, GET_MODE (dest)))
mem_last_set = INSN_CUID (record_dead_insn);
record_value_for_reg (XEXP (link, 0), insn, NULL_RTX);
}
- if (GET_CODE (insn) == CALL_INSN)
+ if (CALL_P (insn))
{
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i))
/* If this is a memory reference, make sure that there were
no stores after it that might have clobbered the value. We don't
have alias info, so we assume any store invalidates it. */
- else if (GET_CODE (x) == MEM && ! RTX_UNCHANGING_P (x)
+ else if (MEM_P (x) && !MEM_READONLY_P (x)
&& INSN_CUID (insn) <= mem_last_set)
{
if (replace)
/* Scan backwards until we find a REG_DEAD note, SET, CLOBBER, label, or
beginning of function. */
- for (; insn && GET_CODE (insn) != CODE_LABEL && GET_CODE (insn) != BARRIER;
+ for (; insn && !LABEL_P (insn) && !BARRIER_P (insn);
insn = prev_nonnote_insn (insn))
{
note_stores (PATTERN (insn), reg_dead_at_p_1, NULL);
case CLOBBER:
/* If we are clobbering a MEM, mark any hard registers inside the
address as used. */
- if (GET_CODE (XEXP (x, 0)) == MEM)
+ if (MEM_P (XEXP (x, 0)))
mark_used_regs_combine (XEXP (XEXP (x, 0), 0));
return;
|| GET_CODE (testreg) == STRICT_LOW_PART)
testreg = XEXP (testreg, 0);
- if (GET_CODE (testreg) == MEM)
+ if (MEM_P (testreg))
mark_used_regs_combine (XEXP (testreg, 0));
mark_used_regs_combine (SET_SRC (x));
For a REG (the only other possibility), the entire value is
being replaced so the old value is not used in this insn. */
- if (GET_CODE (dest) == MEM)
+ if (MEM_P (dest))
move_deaths (XEXP (dest, 0), maybe_kill_insn, from_cuid,
to_insn, pnotes);
return;
/* Just get rid of this note, as it is unused later anyway. */
break;
- case REG_VTABLE_REF:
- /* ??? Should remain with *a particular* memory load. Given the
- nature of vtable data, the last insn seems relatively safe. */
- place = i3;
- break;
-
case REG_NON_LOCAL_GOTO:
- if (GET_CODE (i3) == JUMP_INSN)
+ if (JUMP_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == JUMP_INSN)
- place = i2;
else
- abort ();
+ {
+ gcc_assert (i2 && JUMP_P (i2));
+ place = i2;
+ }
break;
case REG_EH_REGION:
/* These notes must remain with the call or trapping instruction. */
- if (GET_CODE (i3) == CALL_INSN)
+ if (CALL_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == CALL_INSN)
+ else if (i2 && CALL_P (i2))
place = i2;
- else if (flag_non_call_exceptions)
+ else
{
+ gcc_assert (flag_non_call_exceptions);
if (may_trap_p (i3))
place = i3;
else if (i2 && may_trap_p (i2))
can now prove that the instructions can't trap. Drop the
note in this case. */
}
- else
- abort ();
break;
case REG_ALWAYS_RETURN:
case REG_SETJMP:
/* These notes must remain with the call. It should not be
possible for both I2 and I3 to be a call. */
- if (GET_CODE (i3) == CALL_INSN)
+ if (CALL_P (i3))
place = i3;
- else if (i2 && GET_CODE (i2) == CALL_INSN)
- place = i2;
else
- abort ();
+ {
+ gcc_assert (i2 && CALL_P (i2));
+ place = i2;
+ }
break;
case REG_UNUSED:
place = i2;
}
- /* Don't attach REG_LABEL note to a JUMP_INSN which has
- JUMP_LABEL already. Instead, decrement LABEL_NUSES. */
- if (place && GET_CODE (place) == JUMP_INSN && JUMP_LABEL (place))
+ /* Don't attach REG_LABEL note to a JUMP_INSN. Add
+ a JUMP_LABEL instead or decrement LABEL_NUSES. */
+ if (place && JUMP_P (place))
{
- if (JUMP_LABEL (place) != XEXP (note, 0))
- abort ();
- if (GET_CODE (JUMP_LABEL (place)) == CODE_LABEL)
- LABEL_NUSES (JUMP_LABEL (place))--;
+ rtx label = JUMP_LABEL (place);
+
+ if (!label)
+ JUMP_LABEL (place) = XEXP (note, 0);
+ else
+ {
+ gcc_assert (label == XEXP (note, 0));
+ if (LABEL_P (label))
+ LABEL_NUSES (label)--;
+ }
place = 0;
}
- if (place2 && GET_CODE (place2) == JUMP_INSN && JUMP_LABEL (place2))
+ if (place2 && JUMP_P (place2))
{
- if (JUMP_LABEL (place2) != XEXP (note, 0))
- abort ();
- if (GET_CODE (JUMP_LABEL (place2)) == CODE_LABEL)
- LABEL_NUSES (JUMP_LABEL (place2))--;
+ rtx label = JUMP_LABEL (place2);
+
+ if (!label)
+ JUMP_LABEL (place2) = XEXP (note, 0);
+ else
+ {
+ gcc_assert (label == XEXP (note, 0));
+ if (LABEL_P (label))
+ LABEL_NUSES (label)--;
+ }
place2 = 0;
}
break;
/* If the insn previously containing this note still exists,
put it back where it was. Otherwise move it to the previous
insn. Adjust the corresponding REG_LIBCALL note. */
- if (GET_CODE (from_insn) != NOTE)
+ if (!NOTE_P (from_insn))
place = from_insn;
else
{
case REG_LIBCALL:
/* This is handled similarly to REG_RETVAL. */
- if (GET_CODE (from_insn) != NOTE)
+ if (!NOTE_P (from_insn))
place = from_insn;
else
{
use of A and put the death note there. */
if (from_insn
- && GET_CODE (from_insn) == CALL_INSN
+ && CALL_P (from_insn)
&& find_reg_fusage (from_insn, USE, XEXP (note, 0)))
place = from_insn;
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
distribute_notes (old_notes, tem, tem, NULL_RTX);
distribute_links (LOG_LINKS (tem));
- PUT_CODE (tem, NOTE);
- NOTE_LINE_NUMBER (tem) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (tem) = 0;
+ SET_INSN_DELETED (tem);
#ifdef HAVE_cc0
/* Delete the setter too. */
cc0_setter, NULL_RTX);
distribute_links (LOG_LINKS (cc0_setter));
- PUT_CODE (cc0_setter, NOTE);
- NOTE_LINE_NUMBER (cc0_setter)
- = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (cc0_setter) = 0;
+ SET_INSN_DELETED (cc0_setter);
}
#endif
}
}
}
else if (reg_referenced_p (XEXP (note, 0), PATTERN (tem))
- || (GET_CODE (tem) == CALL_INSN
+ || (CALL_P (tem)
&& find_reg_fusage (tem, USE, XEXP (note, 0))))
{
place = tem;
default:
/* Any other notes should not be present at this point in the
compilation. */
- abort ();
+ gcc_unreachable ();
}
if (place)
replace I3, I2, and I1 by I3 and I2. But in that case the
destination of I2 also remains unchanged. */
- if (GET_CODE (XEXP (link, 0)) == NOTE
+ if (NOTE_P (XEXP (link, 0))
|| (set = single_set (XEXP (link, 0))) == 0)
continue;
place = insn;
break;
}
- else if (GET_CODE (insn) == CALL_INSN
+ else if (CALL_P (insn)
&& find_reg_fusage (insn, USE, reg))
{
place = insn;
rtx x = *loc;
if (x != NULL_RTX
- && (REG_P (x) || GET_CODE (x) == MEM)
+ && (REG_P (x) || MEM_P (x))
&& ! reg_mentioned_p (x, (rtx) expr))
return 1;
return 0;
insn_cuid (rtx insn)
{
while (insn != 0 && INSN_UID (insn) > max_uid_cuid
- && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == USE)
+ && NONJUMP_INSN_P (insn) && GET_CODE (PATTERN (insn)) == USE)
insn = NEXT_INSN (insn);
- if (INSN_UID (insn) > max_uid_cuid)
- abort ();
+ gcc_assert (INSN_UID (insn) <= max_uid_cuid);
return INSN_CUID (insn);
}
OSDN Git Service
