/* Optimize by combining instructions for GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This file is part of GCC.
- reg_live_length is not updated
- reg_n_refs is not adjusted in the rare case when a register is
no longer required in a computation
- - there are extremely rare cases (see distribute_regnotes) when a
+ - there are extremely rare cases (see distribute_notes) when a
REG_DEAD note is lost
- a LOG_LINKS entry that refers to an insn with multiple SETs may be
removed because there is no way to know which register it was
static int total_attempts, total_merges, total_extras, total_successes;
+/* Sometimes combine tries to replace the right hand side of an insn
+ with the value of a REG_EQUAL note. This is the insn that has been
+ so modified, or null if none. */
+
+static rtx replaced_rhs_insn;
+
+/* When REPLACED_RHS_INSN is nonnull, this is a copy of the new right
+ hand side. */
+
+static rtx replaced_rhs_value;
\f
/* Vector mapping INSN_UIDs to cuids.
The cuids are like uids but increase monotonically always.
#define INSN_CUID(INSN) \
(INSN_UID (INSN) > max_uid_cuid ? insn_cuid (INSN) : uid_cuid[INSN_UID (INSN)])
-/* In case BITS_PER_WORD == HOST_BITS_PER_WIDE_INT, shifting by
- BITS_PER_WORD would invoke undefined behavior. Work around it. */
-
-#define UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD(val) \
- (((unsigned HOST_WIDE_INT) (val) << (BITS_PER_WORD - 1)) << 1)
-
/* Maximum register number, which is the size of the tables below. */
static unsigned int combine_max_regno;
(1) We do not want to reinitialize at each label.
(2) It is useful, but not critical, to know the actual value assigned
- to a register. Often just its form is helpful.
+ to a register. Often just its form is helpful.
Therefore, we maintain the following fields:
unsigned HOST_WIDE_INT last_set_nonzero_bits;
char last_set_sign_bit_copies;
- ENUM_BITFIELD(machine_mode) last_set_mode : 8;
+ ENUM_BITFIELD(machine_mode) last_set_mode : 8;
/* Set nonzero if references to register n in expressions should not be
used. last_set_invalid is set nonzero when this register is being
unsigned char sign_bit_copies;
unsigned HOST_WIDE_INT nonzero_bits;
+
+ /* Record the value of the label_tick when the last truncation
+ happened. The field truncated_to_mode is only valid if
+ truncation_label == label_tick. */
+
+ int truncation_label;
+
+ /* Record the last truncation seen for this register. If truncation
+ is not a nop to this mode we might be able to save an explicit
+ truncation if we know that value already contains a truncated
+ value. */
+
+ ENUM_BITFIELD(machine_mode) truncated_to_mode : 8;
};
static struct reg_stat *reg_stat;
\f
/* Record one modification to rtl structure
- to be undone by storing old_contents into *where.
- is_int is 1 if the contents are an int. */
+ to be undone by storing old_contents into *where. */
struct undo
{
struct undo *next;
- int is_int;
- union {rtx r; int i;} old_contents;
- union {rtx *r; int *i;} where;
+ enum { UNDO_RTX, UNDO_INT, UNDO_MODE } kind;
+ union { rtx r; int i; enum machine_mode m; } old_contents;
+ union { rtx *r; int *i; } where;
};
/* Record a bunch of changes to be undone, up to MAX_UNDO of them.
static rtx make_compound_operation (rtx, enum rtx_code);
static int get_pos_from_mask (unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT *);
+static rtx canon_reg_for_combine (rtx, rtx);
static rtx force_to_mode (rtx, enum machine_mode,
- unsigned HOST_WIDE_INT, rtx, int);
+ unsigned HOST_WIDE_INT, int);
static rtx if_then_else_cond (rtx, rtx *, rtx *);
static rtx known_cond (rtx, enum rtx_code, rtx, rtx);
static int rtx_equal_for_field_assignment_p (rtx, rtx);
static rtx make_field_assignment (rtx);
static rtx apply_distributive_law (rtx);
static rtx distribute_and_simplify_rtx (rtx, int);
+static rtx simplify_and_const_int_1 (enum machine_mode, rtx,
+ unsigned HOST_WIDE_INT);
static rtx simplify_and_const_int (rtx, enum machine_mode, rtx,
unsigned HOST_WIDE_INT);
static int merge_outer_ops (enum rtx_code *, HOST_WIDE_INT *, enum rtx_code,
HOST_WIDE_INT, enum machine_mode, int *);
-static rtx simplify_shift_const (rtx, enum rtx_code, enum machine_mode, rtx,
+static rtx simplify_shift_const_1 (enum rtx_code, enum machine_mode, rtx, int);
+static rtx simplify_shift_const (rtx, enum rtx_code, enum machine_mode, rtx,
int);
static int recog_for_combine (rtx *, rtx, rtx *);
static rtx gen_lowpart_for_combine (enum machine_mode, rtx);
static enum rtx_code simplify_comparison (enum rtx_code, rtx *, rtx *);
static void update_table_tick (rtx);
static void record_value_for_reg (rtx, rtx, rtx);
-static void check_promoted_subreg (rtx, rtx);
+static void check_conversions (rtx, rtx);
static void record_dead_and_set_regs_1 (rtx, rtx, void *);
static void record_dead_and_set_regs (rtx);
static int get_last_value_validate (rtx *, rtx, int, int);
static void record_promoted_value (rtx, rtx);
static int unmentioned_reg_p_1 (rtx *, void *);
static bool unmentioned_reg_p (rtx, rtx);
+static void record_truncated_value (rtx);
+static bool reg_truncated_to_mode (enum machine_mode, rtx);
+static rtx gen_lowpart_or_truncate (enum machine_mode, rtx);
\f
/* It is not safe to use ordinary gen_lowpart in combine.
#undef RTL_HOOKS_REG_NUM_SIGN_BIT_COPIES
#define RTL_HOOKS_REG_NUM_SIGN_BIT_COPIES reg_num_sign_bit_copies_for_combine
+#undef RTL_HOOKS_REG_TRUNCATED_TO_MODE
+#define RTL_HOOKS_REG_TRUNCATED_TO_MODE reg_truncated_to_mode
+
static const struct rtl_hooks combine_rtl_hooks = RTL_HOOKS_INITIALIZER;
\f
if (undobuf.frees)
buf = undobuf.frees, undobuf.frees = buf->next;
else
- buf = xmalloc (sizeof (struct undo));
+ buf = XNEW (struct undo);
- buf->is_int = 0;
+ buf->kind = UNDO_RTX;
buf->where.r = into;
buf->old_contents.r = oldval;
*into = newval;
if (undobuf.frees)
buf = undobuf.frees, undobuf.frees = buf->next;
else
- buf = xmalloc (sizeof (struct undo));
+ buf = XNEW (struct undo);
- buf->is_int = 1;
+ buf->kind = UNDO_INT;
buf->where.i = into;
buf->old_contents.i = oldval;
*into = newval;
}
#define SUBST_INT(INTO, NEWVAL) do_SUBST_INT(&(INTO), (NEWVAL))
+
+/* Similar to SUBST, but just substitute the mode. This is used when
+ changing the mode of a pseudo-register, so that any other
+ references to the entry in the regno_reg_rtx array will change as
+ well. */
+
+static void
+do_SUBST_MODE (rtx *into, enum machine_mode newval)
+{
+ struct undo *buf;
+ enum machine_mode oldval = GET_MODE (*into);
+
+ if (oldval == newval)
+ return;
+
+ if (undobuf.frees)
+ buf = undobuf.frees, undobuf.frees = buf->next;
+ else
+ buf = XNEW (struct undo);
+
+ buf->kind = UNDO_MODE;
+ buf->where.r = into;
+ buf->old_contents.m = oldval;
+ PUT_MODE (*into, newval);
+
+ buf->next = undobuf.undos, undobuf.undos = buf;
+}
+
+#define SUBST_MODE(INTO, NEWVAL) do_SUBST_MODE(&(INTO), (NEWVAL))
\f
/* Subroutine of try_combine. Determine whether the combine replacement
patterns NEWPAT and NEWI2PAT are cheaper according to insn_rtx_cost
Return nonzero if the combiner has turned an indirect jump
instruction into a direct jump. */
-int
+static int
combine_instructions (rtx f, unsigned int nregs)
{
rtx insn, next;
rtl_hooks = combine_rtl_hooks;
- reg_stat = xcalloc (nregs, sizeof (struct reg_stat));
+ reg_stat = XCNEWVEC (struct reg_stat, nregs);
init_recog_no_volatile ();
if (INSN_UID (insn) > i)
i = INSN_UID (insn);
- uid_cuid = xmalloc ((i + 1) * sizeof (int));
+ uid_cuid = XNEWVEC (int, i + 1);
max_uid_cuid = i;
nonzero_bits_mode = mode_for_size (HOST_BITS_PER_WIDE_INT, MODE_INT, 0);
sbitmap_zero (refresh_blocks);
/* Allocate array of current insn_rtx_costs. */
- uid_insn_cost = xcalloc (max_uid_cuid + 1, sizeof (int));
+ uid_insn_cost = XCNEWVEC (int, max_uid_cuid + 1);
last_insn_cost = max_uid_cuid;
for (insn = f, i = 0; insn; insn = NEXT_INSN (insn))
FOR_EACH_BB (this_basic_block)
{
for (insn = BB_HEAD (this_basic_block);
- insn != NEXT_INSN (BB_END (this_basic_block));
+ insn != NEXT_INSN (BB_END (this_basic_block));
insn = next ? next : NEXT_INSN (insn))
{
next = 0;
{
/* See if we know about function return values before this
insn based upon SUBREG flags. */
- check_promoted_subreg (insn, PATTERN (insn));
+ check_conversions (insn, PATTERN (insn));
/* Try this insn with each insn it links back to. */
be deleted or recognized by try_combine. */
rtx orig = SET_SRC (set);
SET_SRC (set) = note;
+ replaced_rhs_insn = temp;
+ replaced_rhs_value = copy_rtx (note);
next = try_combine (insn, temp, NULL_RTX,
&new_direct_jump_p);
+ replaced_rhs_insn = NULL;
if (next)
goto retry;
SET_SRC (set) = orig;
/* If this register is undefined at the start of the file, we can't
say what its contents were. */
&& ! REGNO_REG_SET_P
- (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start, REGNO (x))
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start, REGNO (x))
&& GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT)
{
if (set == 0 || GET_CODE (set) == CLOBBER)
for (i = XVECLEN (PATTERN (i3), 0) - 1; i >= 0; i--)
if (GET_CODE (XVECEXP (PATTERN (i3), 0, i)) == CLOBBER)
{
- /* Don't substitute for a register intended as a clobberable
+ /* Don't substitute for a register intended as a clobberable
operand. */
rtx reg = XEXP (XVECEXP (PATTERN (i3), 0, i), 0);
if (rtx_equal_p (reg, dest))
{
/* Make sure succ doesn't contain a volatile reference. */
if (succ != 0 && volatile_refs_p (PATTERN (succ)))
- return 0;
+ return 0;
for (p = NEXT_INSN (insn); p != i3; p = NEXT_INSN (p))
- if (INSN_P (p) && p != succ && volatile_refs_p (PATTERN (p)))
+ if (INSN_P (p) && p != succ && volatile_refs_p (PATTERN (p)))
return 0;
}
Consider:
- (set (reg:DI 101) (reg:DI 100))
+ (set (reg:DI 101) (reg:DI 100))
(set (subreg:SI (reg:DI 101) 0) <foo>)
This is NOT equivalent to:
- (parallel [(set (subreg:SI (reg:DI 100) 0) <foo>)
+ (parallel [(set (subreg:SI (reg:DI 100) 0) <foo>)
(set (reg:DI 101) (reg:DI 100))])
Not only does this modify 100 (in which case it might still be valid
rtx dest = SET_DEST (set);
rtx src = SET_SRC (set);
rtx inner_dest = dest;
+ rtx subdest;
while (GET_CODE (inner_dest) == STRICT_LOW_PART
|| GET_CODE (inner_dest) == SUBREG
|| (i1_not_in_src && reg_overlap_mentioned_p (i1dest, src)))
return 0;
- /* If DEST is used in I3, it is being killed in this insn,
- so record that for later.
+ /* If DEST is used in I3, it is being killed in this insn, so
+ record that for later. We have to consider paradoxical
+ subregs here, since they kill the whole register, but we
+ ignore partial subregs, STRICT_LOW_PART, etc.
Never add REG_DEAD notes for the FRAME_POINTER_REGNUM or the
STACK_POINTER_REGNUM, since these are always considered to be
live. Similarly for ARG_POINTER_REGNUM if it is fixed. */
- if (pi3dest_killed && REG_P (dest)
- && reg_referenced_p (dest, PATTERN (i3))
- && REGNO (dest) != FRAME_POINTER_REGNUM
+ subdest = dest;
+ if (GET_CODE (subdest) == SUBREG
+ && (GET_MODE_SIZE (GET_MODE (subdest))
+ >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (subdest)))))
+ subdest = SUBREG_REG (subdest);
+ if (pi3dest_killed
+ && REG_P (subdest)
+ && reg_referenced_p (subdest, PATTERN (i3))
+ && REGNO (subdest) != FRAME_POINTER_REGNUM
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
- && REGNO (dest) != HARD_FRAME_POINTER_REGNUM
+ && REGNO (subdest) != HARD_FRAME_POINTER_REGNUM
#endif
#if ARG_POINTER_REGNUM != FRAME_POINTER_REGNUM
- && (REGNO (dest) != ARG_POINTER_REGNUM
- || ! fixed_regs [REGNO (dest)])
+ && (REGNO (subdest) != ARG_POINTER_REGNUM
+ || ! fixed_regs [REGNO (subdest)])
#endif
- && REGNO (dest) != STACK_POINTER_REGNUM)
+ && REGNO (subdest) != STACK_POINTER_REGNUM)
{
if (*pi3dest_killed)
return 0;
- *pi3dest_killed = dest;
+ *pi3dest_killed = subdest;
}
}
&& !REG_USERVAR_P (x));
}
+
+/* Check whether X, the destination of a set, refers to part of
+ the register specified by REG. */
+
+static bool
+reg_subword_p (rtx x, rtx reg)
+{
+ /* Check that reg is an integer mode register. */
+ if (!REG_P (reg) || GET_MODE_CLASS (GET_MODE (reg)) != MODE_INT)
+ return false;
+
+ if (GET_CODE (x) == STRICT_LOW_PART
+ || GET_CODE (x) == ZERO_EXTRACT)
+ x = XEXP (x, 0);
+
+ return GET_CODE (x) == SUBREG
+ && SUBREG_REG (x) == reg
+ && GET_MODE_CLASS (GET_MODE (x)) == MODE_INT;
+}
+
+
/* Try to combine the insns I1 and I2 into I3.
Here I1 and I2 appear earlier than I3.
I1 can be zero; then we combine just I2 into I3.
}
}
- /* If I2 is setting a double-word pseudo to a constant and I3 is setting
- one of those words to another constant, merge them by making a new
+ /* If I2 is setting a pseudo to a constant and I3 is setting some
+ sub-part of it to another constant, merge them by making a new
constant. */
if (i1 == 0
&& (temp = single_set (i2)) != 0
&& (GET_CODE (SET_SRC (temp)) == CONST_INT
|| GET_CODE (SET_SRC (temp)) == CONST_DOUBLE)
- && REG_P (SET_DEST (temp))
- && GET_MODE_CLASS (GET_MODE (SET_DEST (temp))) == MODE_INT
- && GET_MODE_SIZE (GET_MODE (SET_DEST (temp))) == 2 * UNITS_PER_WORD
&& GET_CODE (PATTERN (i3)) == SET
- && GET_CODE (SET_DEST (PATTERN (i3))) == SUBREG
- && SUBREG_REG (SET_DEST (PATTERN (i3))) == SET_DEST (temp)
- && GET_MODE_CLASS (GET_MODE (SET_DEST (PATTERN (i3)))) == MODE_INT
- && GET_MODE_SIZE (GET_MODE (SET_DEST (PATTERN (i3)))) == UNITS_PER_WORD
- && GET_CODE (SET_SRC (PATTERN (i3))) == CONST_INT)
+ && (GET_CODE (SET_SRC (PATTERN (i3))) == CONST_INT
+ || GET_CODE (SET_SRC (PATTERN (i3))) == CONST_DOUBLE)
+ && reg_subword_p (SET_DEST (PATTERN (i3)), SET_DEST (temp)))
{
- HOST_WIDE_INT lo, hi;
+ rtx dest = SET_DEST (PATTERN (i3));
+ int offset = -1;
+ int width = 0;
- if (GET_CODE (SET_SRC (temp)) == CONST_INT)
- lo = INTVAL (SET_SRC (temp)), hi = lo < 0 ? -1 : 0;
+ if (GET_CODE (dest) == ZERO_EXTRACT)
+ {
+ if (GET_CODE (XEXP (dest, 1)) == CONST_INT
+ && GET_CODE (XEXP (dest, 2)) == CONST_INT)
+ {
+ width = INTVAL (XEXP (dest, 1));
+ offset = INTVAL (XEXP (dest, 2));
+ dest = XEXP (dest, 0);
+ if (BITS_BIG_ENDIAN)
+ offset = GET_MODE_BITSIZE (GET_MODE (dest)) - width - offset;
+ }
+ }
else
{
- lo = CONST_DOUBLE_LOW (SET_SRC (temp));
- hi = CONST_DOUBLE_HIGH (SET_SRC (temp));
+ if (GET_CODE (dest) == STRICT_LOW_PART)
+ dest = XEXP (dest, 0);
+ width = GET_MODE_BITSIZE (GET_MODE (dest));
+ offset = 0;
}
- if (subreg_lowpart_p (SET_DEST (PATTERN (i3))))
+ if (offset >= 0)
{
- /* We don't handle the case of the target word being wider
- than a host wide int. */
- gcc_assert (HOST_BITS_PER_WIDE_INT >= BITS_PER_WORD);
-
- lo &= ~(UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD (1) - 1);
- lo |= (INTVAL (SET_SRC (PATTERN (i3)))
- & (UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD (1) - 1));
+ /* If this is the low part, we're done. */
+ if (subreg_lowpart_p (dest))
+ ;
+ /* Handle the case where inner is twice the size of outer. */
+ else if (GET_MODE_BITSIZE (GET_MODE (SET_DEST (temp)))
+ == 2 * GET_MODE_BITSIZE (GET_MODE (dest)))
+ offset += GET_MODE_BITSIZE (GET_MODE (dest));
+ /* Otherwise give up for now. */
+ else
+ offset = -1;
}
- else if (HOST_BITS_PER_WIDE_INT == BITS_PER_WORD)
- hi = INTVAL (SET_SRC (PATTERN (i3)));
- else if (HOST_BITS_PER_WIDE_INT >= 2 * BITS_PER_WORD)
+
+ if (offset >= 0)
{
- int sign = -(int) ((unsigned HOST_WIDE_INT) lo
- >> (HOST_BITS_PER_WIDE_INT - 1));
+ HOST_WIDE_INT mhi, ohi, ihi;
+ HOST_WIDE_INT mlo, olo, ilo;
+ rtx inner = SET_SRC (PATTERN (i3));
+ rtx outer = SET_SRC (temp);
- lo &= ~ (UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD
- (UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD (1) - 1));
- lo |= (UWIDE_SHIFT_LEFT_BY_BITS_PER_WORD
- (INTVAL (SET_SRC (PATTERN (i3)))));
- if (hi == sign)
- hi = lo < 0 ? -1 : 0;
- }
- else
- /* We don't handle the case of the higher word not fitting
- entirely in either hi or lo. */
- gcc_unreachable ();
+ if (GET_CODE (outer) == CONST_INT)
+ {
+ olo = INTVAL (outer);
+ ohi = olo < 0 ? -1 : 0;
+ }
+ else
+ {
+ olo = CONST_DOUBLE_LOW (outer);
+ ohi = CONST_DOUBLE_HIGH (outer);
+ }
- combine_merges++;
- subst_insn = i3;
- subst_low_cuid = INSN_CUID (i2);
- added_sets_2 = added_sets_1 = 0;
- i2dest = SET_DEST (temp);
- i2dest_killed = dead_or_set_p (i2, i2dest);
+ if (GET_CODE (inner) == CONST_INT)
+ {
+ ilo = INTVAL (inner);
+ ihi = ilo < 0 ? -1 : 0;
+ }
+ else
+ {
+ ilo = CONST_DOUBLE_LOW (inner);
+ ihi = CONST_DOUBLE_HIGH (inner);
+ }
+
+ if (width < HOST_BITS_PER_WIDE_INT)
+ {
+ mlo = ((unsigned HOST_WIDE_INT) 1 << width) - 1;
+ mhi = 0;
+ }
+ else if (width < HOST_BITS_PER_WIDE_INT * 2)
+ {
+ mhi = ((unsigned HOST_WIDE_INT) 1
+ << (width - HOST_BITS_PER_WIDE_INT)) - 1;
+ mlo = -1;
+ }
+ else
+ {
+ mlo = -1;
+ mhi = -1;
+ }
- SUBST (SET_SRC (temp),
- immed_double_const (lo, hi, GET_MODE (SET_DEST (temp))));
+ ilo &= mlo;
+ ihi &= mhi;
- newpat = PATTERN (i2);
- goto validate_replacement;
+ if (offset >= HOST_BITS_PER_WIDE_INT)
+ {
+ mhi = mlo << (offset - HOST_BITS_PER_WIDE_INT);
+ mlo = 0;
+ ihi = ilo << (offset - HOST_BITS_PER_WIDE_INT);
+ ilo = 0;
+ }
+ else if (offset > 0)
+ {
+ mhi = (mhi << offset) | ((unsigned HOST_WIDE_INT) mlo
+ >> (HOST_BITS_PER_WIDE_INT - offset));
+ mlo = mlo << offset;
+ ihi = (ihi << offset) | ((unsigned HOST_WIDE_INT) ilo
+ >> (HOST_BITS_PER_WIDE_INT - offset));
+ ilo = ilo << offset;
+ }
+
+ olo = (olo & ~mlo) | ilo;
+ ohi = (ohi & ~mhi) | ihi;
+
+ combine_merges++;
+ subst_insn = i3;
+ subst_low_cuid = INSN_CUID (i2);
+ added_sets_2 = added_sets_1 = 0;
+ i2dest = SET_DEST (temp);
+ i2dest_killed = dead_or_set_p (i2, i2dest);
+
+ SUBST (SET_SRC (temp),
+ immed_double_const (olo, ohi, GET_MODE (SET_DEST (temp))));
+
+ newpat = PATTERN (i2);
+ goto validate_replacement;
+ }
}
#ifndef HAVE_cc0
make up a dummy I1 that is
(set Y OP)
and change I2 to be
- (set (reg:CC X) (compare:CC Y (const_int 0)))
+ (set (reg:CC X) (compare:CC Y (const_int 0)))
(We can ignore any trailing CLOBBERs.)
subst_insn = i3;
- /* It is possible that the source of I2 or I1 may be performing an
- unneeded operation, such as a ZERO_EXTEND of something that is known
- to have the high part zero. Handle that case by letting subst look at
- the innermost one of them.
-
- Another way to do this would be to have a function that tries to
- simplify a single insn instead of merging two or more insns. We don't
- do this because of the potential of infinite loops and because
- of the potential extra memory required. However, doing it the way
- we are is a bit of a kludge and doesn't catch all cases.
-
- But only do this if -fexpensive-optimizations since it slows things down
- and doesn't usually win. */
-
- if (flag_expensive_optimizations)
- {
- /* Pass pc_rtx so no substitutions are done, just simplifications. */
- if (i1)
- {
- subst_low_cuid = INSN_CUID (i1);
- i1src = subst (i1src, pc_rtx, pc_rtx, 0, 0);
- }
- else
- {
- subst_low_cuid = INSN_CUID (i2);
- i2src = subst (i2src, pc_rtx, pc_rtx, 0, 0);
- }
- }
-
#ifndef HAVE_cc0
/* Many machines that don't use CC0 have insns that can both perform an
arithmetic operation and set the condition code. These operations will
compare_mode))
{
unsigned int regno = REGNO (SET_DEST (newpat));
- rtx new_dest = gen_rtx_REG (compare_mode, regno);
+ rtx new_dest;
- if (regno >= FIRST_PSEUDO_REGISTER)
- SUBST (regno_reg_rtx[regno], new_dest);
+ if (regno < FIRST_PSEUDO_REGISTER)
+ new_dest = gen_rtx_REG (compare_mode, regno);
+ else
+ {
+ SUBST_MODE (regno_reg_rtx[regno], compare_mode);
+ new_dest = regno_reg_rtx[regno];
+ }
SUBST (SET_DEST (newpat), new_dest);
SUBST (XEXP (*cc_use, 0), new_dest);
else
#endif
{
+ /* It is possible that the source of I2 or I1 may be performing
+ an unneeded operation, such as a ZERO_EXTEND of something
+ that is known to have the high part zero. Handle that case
+ by letting subst look at the innermost one of them.
+
+ Another way to do this would be to have a function that tries
+ to simplify a single insn instead of merging two or more
+ insns. We don't do this because of the potential of infinite
+ loops and because of the potential extra memory required.
+ However, doing it the way we are is a bit of a kludge and
+ doesn't catch all cases.
+
+ But only do this if -fexpensive-optimizations since it slows
+ things down and doesn't usually win.
+
+ This is not done in the COMPARE case above because the
+ unmodified I2PAT is used in the PARALLEL and so a pattern
+ with a modified I2SRC would not match. */
+
+ if (flag_expensive_optimizations)
+ {
+ /* Pass pc_rtx so no substitutions are done, just
+ simplifications. */
+ if (i1)
+ {
+ subst_low_cuid = INSN_CUID (i1);
+ i1src = subst (i1src, pc_rtx, pc_rtx, 0, 0);
+ }
+ else
+ {
+ subst_low_cuid = INSN_CUID (i2);
+ i2src = subst (i2src, pc_rtx, pc_rtx, 0, 0);
+ }
+ }
+
n_occurrences = 0; /* `subst' counts here */
/* If I1 feeds into I2 (not into I3) and I1DEST is in I1SRC, we
&& asm_noperands (newpat) < 0)
{
rtx m_split, *split;
- rtx ni2dest = i2dest;
/* See if the MD file can split NEWPAT. If it can't, see if letting it
use I2DEST as a scratch register will help. In the latter case,
possible to try that as a scratch reg. This would require adding
more code to make it work though. */
- if (m_split == 0 && ! reg_overlap_mentioned_p (ni2dest, newpat))
+ if (m_split == 0 && ! reg_overlap_mentioned_p (i2dest, newpat))
{
- enum machine_mode new_mode = GET_MODE (SET_DEST (newpat));
- /* If I2DEST is a hard register or the only use of a pseudo,
- we can change its mode. */
- if (new_mode != GET_MODE (i2dest)
- && new_mode != VOIDmode
- && can_change_dest_mode (i2dest, added_sets_2, new_mode))
- ni2dest = gen_rtx_REG (GET_MODE (SET_DEST (newpat)),
- REGNO (i2dest));
+ enum machine_mode new_mode = GET_MODE (SET_DEST (newpat));
+ /* First try to split using the original register as a
+ scratch register. */
m_split = split_insns (gen_rtx_PARALLEL
(VOIDmode,
gen_rtvec (2, newpat,
gen_rtx_CLOBBER (VOIDmode,
- ni2dest))),
+ i2dest))),
i3);
- /* If the split with the mode-changed register didn't work, try
- the original register. */
- if (! m_split && ni2dest != i2dest)
+
+ /* If that didn't work, try changing the mode of I2DEST if
+ we can. */
+ if (m_split == 0
+ && new_mode != GET_MODE (i2dest)
+ && new_mode != VOIDmode
+ && can_change_dest_mode (i2dest, added_sets_2, new_mode))
{
- ni2dest = i2dest;
+ enum machine_mode old_mode = GET_MODE (i2dest);
+ rtx ni2dest;
+
+ if (REGNO (i2dest) < FIRST_PSEUDO_REGISTER)
+ ni2dest = gen_rtx_REG (new_mode, REGNO (i2dest));
+ else
+ {
+ SUBST_MODE (regno_reg_rtx[REGNO (i2dest)], new_mode);
+ ni2dest = regno_reg_rtx[REGNO (i2dest)];
+ }
+
m_split = split_insns (gen_rtx_PARALLEL
(VOIDmode,
gen_rtvec (2, newpat,
gen_rtx_CLOBBER (VOIDmode,
- i2dest))),
+ ni2dest))),
i3);
+
+ if (m_split == 0
+ && REGNO (i2dest) >= FIRST_PSEUDO_REGISTER)
+ {
+ struct undo *buf;
+
+ PUT_MODE (regno_reg_rtx[REGNO (i2dest)], old_mode);
+ buf = undobuf.undos;
+ undobuf.undos = buf->next;
+ buf->next = undobuf.frees;
+ undobuf.frees = buf;
+ }
}
}
i3set = single_set (NEXT_INSN (m_split));
i2set = single_set (m_split);
- /* In case we changed the mode of I2DEST, replace it in the
- pseudo-register table here. We can't do it above in case this
- code doesn't get executed and we do a split the other way. */
-
- if (REGNO (i2dest) >= FIRST_PSEUDO_REGISTER)
- SUBST (regno_reg_rtx[REGNO (i2dest)], ni2dest);
-
i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
/* If I2 or I3 has multiple SETs, we won't know how to track
rtx newdest = i2dest;
enum rtx_code split_code = GET_CODE (*split);
enum machine_mode split_mode = GET_MODE (*split);
+ bool subst_done = false;
+ newi2pat = NULL_RTX;
/* Get NEWDEST as a register in the proper mode. We have already
validated that we can do this. */
if (GET_MODE (i2dest) != split_mode && split_mode != VOIDmode)
{
- newdest = gen_rtx_REG (split_mode, REGNO (i2dest));
-
- if (REGNO (i2dest) >= FIRST_PSEUDO_REGISTER)
- SUBST (regno_reg_rtx[REGNO (i2dest)], newdest);
+ if (REGNO (i2dest) < FIRST_PSEUDO_REGISTER)
+ newdest = gen_rtx_REG (split_mode, REGNO (i2dest));
+ else
+ {
+ SUBST_MODE (regno_reg_rtx[REGNO (i2dest)], split_mode);
+ newdest = regno_reg_rtx[REGNO (i2dest)];
+ }
}
/* If *SPLIT is a (mult FOO (const_int pow2)), convert it to
}
#endif
- newi2pat = gen_rtx_SET (VOIDmode, newdest, *split);
- SUBST (*split, newdest);
+ /* Attempt to split binary operators using arithmetic identities. */
+ if (BINARY_P (SET_SRC (newpat))
+ && split_mode == GET_MODE (SET_SRC (newpat))
+ && ! side_effects_p (SET_SRC (newpat)))
+ {
+ rtx setsrc = SET_SRC (newpat);
+ enum machine_mode mode = GET_MODE (setsrc);
+ enum rtx_code code = GET_CODE (setsrc);
+ rtx src_op0 = XEXP (setsrc, 0);
+ rtx src_op1 = XEXP (setsrc, 1);
+
+ /* Split "X = Y op Y" as "Z = Y; X = Z op Z". */
+ if (rtx_equal_p (src_op0, src_op1))
+ {
+ newi2pat = gen_rtx_SET (VOIDmode, newdest, src_op0);
+ SUBST (XEXP (setsrc, 0), newdest);
+ SUBST (XEXP (setsrc, 1), newdest);
+ subst_done = true;
+ }
+ /* Split "((P op Q) op R) op S" where op is PLUS or MULT. */
+ else if ((code == PLUS || code == MULT)
+ && GET_CODE (src_op0) == code
+ && GET_CODE (XEXP (src_op0, 0)) == code
+ && (INTEGRAL_MODE_P (mode)
+ || (FLOAT_MODE_P (mode)
+ && flag_unsafe_math_optimizations)))
+ {
+ rtx p = XEXP (XEXP (src_op0, 0), 0);
+ rtx q = XEXP (XEXP (src_op0, 0), 1);
+ rtx r = XEXP (src_op0, 1);
+ rtx s = src_op1;
+
+ /* Split both "((X op Y) op X) op Y" and
+ "((X op Y) op Y) op X" as "T op T" where T is
+ "X op Y". */
+ if ((rtx_equal_p (p,r) && rtx_equal_p (q,s))
+ || (rtx_equal_p (p,s) && rtx_equal_p (q,r)))
+ {
+ newi2pat = gen_rtx_SET (VOIDmode, newdest,
+ XEXP (src_op0, 0));
+ SUBST (XEXP (setsrc, 0), newdest);
+ SUBST (XEXP (setsrc, 1), newdest);
+ subst_done = true;
+ }
+ /* Split "((X op X) op Y) op Y)" as "T op T" where
+ T is "X op Y". */
+ else if (rtx_equal_p (p,q) && rtx_equal_p (r,s))
+ {
+ rtx tmp = simplify_gen_binary (code, mode, p, r);
+ newi2pat = gen_rtx_SET (VOIDmode, newdest, tmp);
+ SUBST (XEXP (setsrc, 0), newdest);
+ SUBST (XEXP (setsrc, 1), newdest);
+ subst_done = true;
+ }
+ }
+ }
+
+ if (!subst_done)
+ {
+ newi2pat = gen_rtx_SET (VOIDmode, newdest, *split);
+ SUBST (*split, newdest);
+ }
+
i2_code_number = recog_for_combine (&newi2pat, i2, &new_i2_notes);
/* recog_for_combine might have added CLOBBERs to newi2pat.
&& GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != STRICT_LOW_PART
&& ! use_crosses_set_p (SET_SRC (XVECEXP (newpat, 0, 1)),
INSN_CUID (i2))
- /* Don't pass sets with (USE (MEM ...)) dests to the following. */
- && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != USE
- && GET_CODE (SET_DEST (XVECEXP (newpat, 0, 0))) != USE
&& ! reg_referenced_p (SET_DEST (XVECEXP (newpat, 0, 1)),
XVECEXP (newpat, 0, 0))
&& ! reg_referenced_p (SET_DEST (XVECEXP (newpat, 0, 0)),
XVECEXP (newpat, 0, 1))
&& ! (contains_muldiv (SET_SRC (XVECEXP (newpat, 0, 0)))
- && contains_muldiv (SET_SRC (XVECEXP (newpat, 0, 1)))))
+ && contains_muldiv (SET_SRC (XVECEXP (newpat, 0, 1))))
+#ifdef HAVE_cc0
+ /* We cannot split the parallel into two sets if both sets
+ reference cc0. */
+ && ! (reg_referenced_p (cc0_rtx, XVECEXP (newpat, 0, 0))
+ && reg_referenced_p (cc0_rtx, XVECEXP (newpat, 0, 1)))
+#endif
+ )
{
/* Normally, it doesn't matter which of the two is done first,
but it does if one references cc0. In that case, it has to
rtx ni2dest;
/* I3 now uses what used to be its destination and which is now
- I2's destination. This requires us to do a few adjustments. */
+ I2's destination. This requires us to do a few adjustments. */
PATTERN (i3) = newpat;
adjust_for_new_dest (i3);
/* We need a LOG_LINK from I3 to I2. But we used to have one,
- so we still will.
+ so we still will.
However, some later insn might be using I2's dest and have
a LOG_LINK pointing at I3. We must remove this link.
if (i3_subst_into_i2)
{
for (i = 0; i < XVECLEN (PATTERN (i2), 0); i++)
- if (GET_CODE (XVECEXP (PATTERN (i2), 0, i)) != USE
+ if ((GET_CODE (XVECEXP (PATTERN (i2), 0, i)) == SET
+ || GET_CODE (XVECEXP (PATTERN (i2), 0, i)) == CLOBBER)
&& REG_P (SET_DEST (XVECEXP (PATTERN (i2), 0, i)))
&& SET_DEST (XVECEXP (PATTERN (i2), 0, i)) != i2dest
&& ! find_reg_note (i2, REG_UNUSED,
for (undo = undobuf.undos; undo; undo = next)
{
next = undo->next;
- if (undo->is_int)
- *undo->where.i = undo->old_contents.i;
- else
- *undo->where.r = undo->old_contents.r;
+ switch (undo->kind)
+ {
+ case UNDO_RTX:
+ *undo->where.r = undo->old_contents.r;
+ break;
+ case UNDO_INT:
+ *undo->where.i = undo->old_contents.i;
+ break;
+ case UNDO_MODE:
+ PUT_MODE (*undo->where.r, undo->old_contents.m);
+ break;
+ default:
+ gcc_unreachable ();
+ }
undo->next = undobuf.frees;
undobuf.frees = undo;
}
undobuf.undos = 0;
}
-
\f
/* Find the innermost point within the rtx at LOC, possibly LOC itself,
where we have an arithmetic expression and return that point. LOC will
rtx dest = XEXP (SET_DEST (x), 0);
enum machine_mode mode = GET_MODE (dest);
unsigned HOST_WIDE_INT mask = ((HOST_WIDE_INT) 1 << len) - 1;
+ rtx or_mask;
if (BITS_BIG_ENDIAN)
pos = GET_MODE_BITSIZE (mode) - len - pos;
+ or_mask = gen_int_mode (src << pos, mode);
if (src == mask)
SUBST (SET_SRC (x),
- simplify_gen_binary (IOR, mode, dest, GEN_INT (src << pos)));
+ simplify_gen_binary (IOR, mode, dest, or_mask));
else
{
rtx negmask = gen_int_mode (~(mask << pos), mode);
SUBST (SET_SRC (x),
simplify_gen_binary (IOR, mode,
- simplify_gen_binary (AND, mode,
+ simplify_gen_binary (AND, mode,
dest, negmask),
- GEN_INT (src << pos)));
+ or_mask));
}
SUBST (SET_DEST (x), dest);
enum rtx_code code = GET_CODE (x);
enum machine_mode mode = GET_MODE (x);
rtx temp;
- rtx reversed;
int i;
/* If this is a commutative operation, put a constant last and a complex
&& ! (GET_CODE (XEXP (x, 1)) == SUBREG
&& OBJECT_P (SUBREG_REG (XEXP (x, 1)))))))
|| (UNARY_P (x)
- && (!OBJECT_P (XEXP (x, 0))
+ && (!OBJECT_P (XEXP (x, 0))
&& ! (GET_CODE (XEXP (x, 0)) == SUBREG
&& OBJECT_P (SUBREG_REG (XEXP (x, 0)))))))
{
else if (true_rtx == const0_rtx && false_rtx == const_true_rtx
&& ((reversed = reversed_comparison_code_parts
(cond_code, cond, cop1, NULL))
- != UNKNOWN))
+ != UNKNOWN))
x = simplify_gen_relational (reversed, mode, VOIDmode,
cond, cop1);
&& true_rtx == const0_rtx
&& ((reversed = reversed_comparison_code_parts
(cond_code, cond, cop1, NULL))
- != UNKNOWN))
+ != UNKNOWN))
x = simplify_gen_unary (NEG, mode,
simplify_gen_relational (reversed,
mode, VOIDmode,
return gen_lowpart (mode, SUBREG_REG (x));
if (GET_MODE_CLASS (GET_MODE (SUBREG_REG (x))) == MODE_CC)
- break;
+ break;
{
rtx temp;
temp = simplify_subreg (mode, SUBREG_REG (x), op0_mode,
break;
- case NOT:
- if (GET_CODE (XEXP (x, 0)) == SUBREG
- && subreg_lowpart_p (XEXP (x, 0))
- && (GET_MODE_SIZE (GET_MODE (XEXP (x, 0)))
- < GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (x, 0)))))
- && GET_CODE (SUBREG_REG (XEXP (x, 0))) == ASHIFT
- && XEXP (SUBREG_REG (XEXP (x, 0)), 0) == const1_rtx)
- {
- enum machine_mode inner_mode = GET_MODE (SUBREG_REG (XEXP (x, 0)));
-
- x = gen_rtx_ROTATE (inner_mode,
- simplify_gen_unary (NOT, inner_mode, const1_rtx,
- inner_mode),
- XEXP (SUBREG_REG (XEXP (x, 0)), 1));
- return gen_lowpart (mode, x);
- }
-
- /* Apply De Morgan's laws to reduce number of patterns for machines
- with negating logical insns (and-not, nand, etc.). If result has
- only one NOT, put it first, since that is how the patterns are
- coded. */
-
- if (GET_CODE (XEXP (x, 0)) == IOR || GET_CODE (XEXP (x, 0)) == AND)
- {
- rtx in1 = XEXP (XEXP (x, 0), 0), in2 = XEXP (XEXP (x, 0), 1);
- enum machine_mode op_mode;
-
- op_mode = GET_MODE (in1);
- in1 = simplify_gen_unary (NOT, op_mode, in1, op_mode);
-
- op_mode = GET_MODE (in2);
- if (op_mode == VOIDmode)
- op_mode = mode;
- in2 = simplify_gen_unary (NOT, op_mode, in2, op_mode);
-
- if (GET_CODE (in2) == NOT && GET_CODE (in1) != NOT)
- {
- rtx tem = in2;
- in2 = in1; in1 = tem;
- }
-
- return gen_rtx_fmt_ee (GET_CODE (XEXP (x, 0)) == IOR ? AND : IOR,
- mode, in1, in2);
- }
- break;
-
case NEG:
- /* (neg (xor A 1)) is (plus A -1) if A is known to be either 0 or 1. */
- if (GET_CODE (XEXP (x, 0)) == XOR
- && XEXP (XEXP (x, 0), 1) == const1_rtx
- && nonzero_bits (XEXP (XEXP (x, 0), 0), mode) == 1)
- return simplify_gen_binary (PLUS, mode, XEXP (XEXP (x, 0), 0),
- constm1_rtx);
-
temp = expand_compound_operation (XEXP (x, 0));
/* For C equal to the width of MODE minus 1, (neg (ashiftrt X C)) can be
if (GET_CODE (temp) == ASHIFTRT
&& GET_CODE (XEXP (temp, 1)) == CONST_INT
&& INTVAL (XEXP (temp, 1)) == GET_MODE_BITSIZE (mode) - 1)
- return simplify_shift_const (temp, LSHIFTRT, mode, XEXP (temp, 0),
+ return simplify_shift_const (NULL_RTX, LSHIFTRT, mode, XEXP (temp, 0),
INTVAL (XEXP (temp, 1)));
/* If X has only a single bit that might be nonzero, say, bit I, convert
GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))))
SUBST (XEXP (x, 0),
force_to_mode (XEXP (x, 0), GET_MODE (XEXP (x, 0)),
- GET_MODE_MASK (mode), NULL_RTX, 0));
-
- /* (truncate:SI ({sign,zero}_extend:DI foo:SI)) == foo:SI. */
- if ((GET_CODE (XEXP (x, 0)) == SIGN_EXTEND
- || GET_CODE (XEXP (x, 0)) == ZERO_EXTEND)
- && GET_MODE (XEXP (XEXP (x, 0), 0)) == mode)
- return XEXP (XEXP (x, 0), 0);
+ GET_MODE_MASK (mode), 0));
- /* (truncate:SI (OP:DI ({sign,zero}_extend:DI foo:SI))) is
- (OP:SI foo:SI) if OP is NEG or ABS. */
- if ((GET_CODE (XEXP (x, 0)) == ABS
- || GET_CODE (XEXP (x, 0)) == NEG)
- && (GET_CODE (XEXP (XEXP (x, 0), 0)) == SIGN_EXTEND
- || GET_CODE (XEXP (XEXP (x, 0), 0)) == ZERO_EXTEND)
- && GET_MODE (XEXP (XEXP (XEXP (x, 0), 0), 0)) == mode)
- return simplify_gen_unary (GET_CODE (XEXP (x, 0)), mode,
- XEXP (XEXP (XEXP (x, 0), 0), 0), mode);
-
- /* (truncate:SI (subreg:DI (truncate:SI X) 0)) is
- (truncate:SI x). */
- if (GET_CODE (XEXP (x, 0)) == SUBREG
- && GET_CODE (SUBREG_REG (XEXP (x, 0))) == TRUNCATE
- && subreg_lowpart_p (XEXP (x, 0)))
- return SUBREG_REG (XEXP (x, 0));
-
- /* If we know that the value is already truncated, we can
- replace the TRUNCATE with a SUBREG if TRULY_NOOP_TRUNCATION
- is nonzero for the corresponding modes. But don't do this
- for an (LSHIFTRT (MULT ...)) since this will cause problems
- with the umulXi3_highpart patterns. */
- if (TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
- GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))))
- && num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
- >= (unsigned int) (GET_MODE_BITSIZE (mode) + 1)
- && ! (GET_CODE (XEXP (x, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (x, 0), 0)) == MULT))
- return gen_lowpart (mode, XEXP (x, 0));
-
- /* A truncate of a comparison can be replaced with a subreg if
- STORE_FLAG_VALUE permits. This is like the previous test,
- but it works even if the comparison is done in a mode larger
- than HOST_BITS_PER_WIDE_INT. */
- if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && COMPARISON_P (XEXP (x, 0))
- && ((HOST_WIDE_INT) STORE_FLAG_VALUE & ~GET_MODE_MASK (mode)) == 0)
- return gen_lowpart (mode, XEXP (x, 0));
-
- /* Similarly, a truncate of a register whose value is a
- comparison can be replaced with a subreg if STORE_FLAG_VALUE
- permits. */
+ /* Similarly to what we do in simplify-rtx.c, a truncate of a register
+ whose value is a comparison can be replaced with a subreg if
+ STORE_FLAG_VALUE permits. */
if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& ((HOST_WIDE_INT) STORE_FLAG_VALUE & ~GET_MODE_MASK (mode)) == 0
&& (temp = get_last_value (XEXP (x, 0)))
&& COMPARISON_P (temp))
return gen_lowpart (mode, XEXP (x, 0));
-
break;
- case FLOAT_TRUNCATE:
- /* (float_truncate:SF (float_extend:DF foo:SF)) = foo:SF. */
- if (GET_CODE (XEXP (x, 0)) == FLOAT_EXTEND
- && GET_MODE (XEXP (XEXP (x, 0), 0)) == mode)
- return XEXP (XEXP (x, 0), 0);
-
- /* (float_truncate:SF (float_truncate:DF foo:XF))
- = (float_truncate:SF foo:XF).
- This may eliminate double rounding, so it is unsafe.
-
- (float_truncate:SF (float_extend:XF foo:DF))
- = (float_truncate:SF foo:DF).
-
- (float_truncate:DF (float_extend:XF foo:SF))
- = (float_extend:SF foo:DF). */
- if ((GET_CODE (XEXP (x, 0)) == FLOAT_TRUNCATE
- && flag_unsafe_math_optimizations)
- || GET_CODE (XEXP (x, 0)) == FLOAT_EXTEND)
- return simplify_gen_unary (GET_MODE_SIZE (GET_MODE (XEXP (XEXP (x, 0),
- 0)))
- > GET_MODE_SIZE (mode)
- ? FLOAT_TRUNCATE : FLOAT_EXTEND,
- mode,
- XEXP (XEXP (x, 0), 0), mode);
-
- /* (float_truncate (float x)) is (float x) */
- if (GET_CODE (XEXP (x, 0)) == FLOAT
- && (flag_unsafe_math_optimizations
- || ((unsigned)significand_size (GET_MODE (XEXP (x, 0)))
- >= (GET_MODE_BITSIZE (GET_MODE (XEXP (XEXP (x, 0), 0)))
- - num_sign_bit_copies (XEXP (XEXP (x, 0), 0),
- GET_MODE (XEXP (XEXP (x, 0), 0)))))))
- return simplify_gen_unary (FLOAT, mode,
- XEXP (XEXP (x, 0), 0),
- GET_MODE (XEXP (XEXP (x, 0), 0)));
-
- /* (float_truncate:SF (OP:DF (float_extend:DF foo:sf))) is
- (OP:SF foo:SF) if OP is NEG or ABS. */
- if ((GET_CODE (XEXP (x, 0)) == ABS
- || GET_CODE (XEXP (x, 0)) == NEG)
- && GET_CODE (XEXP (XEXP (x, 0), 0)) == FLOAT_EXTEND
- && GET_MODE (XEXP (XEXP (XEXP (x, 0), 0), 0)) == mode)
- return simplify_gen_unary (GET_CODE (XEXP (x, 0)), mode,
- XEXP (XEXP (XEXP (x, 0), 0), 0), mode);
-
- /* (float_truncate:SF (subreg:DF (float_truncate:SF X) 0))
- is (float_truncate:SF x). */
- if (GET_CODE (XEXP (x, 0)) == SUBREG
- && subreg_lowpart_p (XEXP (x, 0))
- && GET_CODE (SUBREG_REG (XEXP (x, 0))) == FLOAT_TRUNCATE)
- return SUBREG_REG (XEXP (x, 0));
- break;
- case FLOAT_EXTEND:
- /* (float_extend (float_extend x)) is (float_extend x)
-
- (float_extend (float x)) is (float x) assuming that double
- rounding can't happen.
- */
- if (GET_CODE (XEXP (x, 0)) == FLOAT_EXTEND
- || (GET_CODE (XEXP (x, 0)) == FLOAT
- && ((unsigned)significand_size (GET_MODE (XEXP (x, 0)))
- >= (GET_MODE_BITSIZE (GET_MODE (XEXP (XEXP (x, 0), 0)))
- - num_sign_bit_copies (XEXP (XEXP (x, 0), 0),
- GET_MODE (XEXP (XEXP (x, 0), 0)))))))
- return simplify_gen_unary (GET_CODE (XEXP (x, 0)), mode,
- XEXP (XEXP (x, 0), 0),
- GET_MODE (XEXP (XEXP (x, 0), 0)));
-
- break;
#ifdef HAVE_cc0
case COMPARE:
/* Convert (compare FOO (const_int 0)) to FOO unless we aren't
#endif
case PLUS:
- /* Canonicalize (plus (mult (neg B) C) A) to (minus A (mult B C)).
- */
- if (GET_CODE (XEXP (x, 0)) == MULT
- && GET_CODE (XEXP (XEXP (x, 0), 0)) == NEG)
- {
- rtx in1, in2;
-
- in1 = XEXP (XEXP (XEXP (x, 0), 0), 0);
- in2 = XEXP (XEXP (x, 0), 1);
- return simplify_gen_binary (MINUS, mode, XEXP (x, 1),
- simplify_gen_binary (MULT, mode,
- in1, in2));
- }
-
- /* If we have (plus (plus (A const) B)), associate it so that CONST is
- outermost. That's because that's the way indexed addresses are
- supposed to appear. This code used to check many more cases, but
- they are now checked elsewhere. */
- if (GET_CODE (XEXP (x, 0)) == PLUS
- && CONSTANT_ADDRESS_P (XEXP (XEXP (x, 0), 1)))
- return simplify_gen_binary (PLUS, mode,
- simplify_gen_binary (PLUS, mode,
- XEXP (XEXP (x, 0), 0),
- XEXP (x, 1)),
- XEXP (XEXP (x, 0), 1));
-
/* (plus (xor (and <foo> (const_int pow2 - 1)) <c>) <-c>)
when c is (const_int (pow2 + 1) / 2) is a sign extension of a
bit-field and can be replaced by either a sign_extend or a
GET_MODE_BITSIZE (mode) - (i + 1)),
GET_MODE_BITSIZE (mode) - (i + 1));
- /* (plus (comparison A B) C) can become (neg (rev-comp A B)) if
- C is 1 and STORE_FLAG_VALUE is -1 or if C is -1 and STORE_FLAG_VALUE
- is 1. This produces better code than the alternative immediately
- below. */
- if (COMPARISON_P (XEXP (x, 0))
- && ((STORE_FLAG_VALUE == -1 && XEXP (x, 1) == const1_rtx)
- || (STORE_FLAG_VALUE == 1 && XEXP (x, 1) == constm1_rtx))
- && (reversed = reversed_comparison (XEXP (x, 0), mode)))
- return
- simplify_gen_unary (NEG, mode, reversed, mode);
-
/* If only the low-order bit of X is possibly nonzero, (plus x -1)
can become (ashiftrt (ashift (xor x 1) C) C) where C is
the bitsize of the mode - 1. This allows simplification of
break;
case MINUS:
- /* If STORE_FLAG_VALUE is 1, (minus 1 (comparison foo bar)) can be done
- by reversing the comparison code if valid. */
- if (STORE_FLAG_VALUE == 1
- && XEXP (x, 0) == const1_rtx
- && COMPARISON_P (XEXP (x, 1))
- && (reversed = reversed_comparison (XEXP (x, 1), mode)))
- return reversed;
-
/* (minus <foo> (and <foo> (const_int -pow2))) becomes
(and <foo> (const_int pow2-1)) */
if (GET_CODE (XEXP (x, 1)) == AND
&& rtx_equal_p (XEXP (XEXP (x, 1), 0), XEXP (x, 0)))
return simplify_and_const_int (NULL_RTX, mode, XEXP (x, 0),
-INTVAL (XEXP (XEXP (x, 1), 1)) - 1);
-
- /* Canonicalize (minus A (mult (neg B) C)) to (plus (mult B C) A).
- */
- if (GET_CODE (XEXP (x, 1)) == MULT
- && GET_CODE (XEXP (XEXP (x, 1), 0)) == NEG)
- {
- rtx in1, in2;
-
- in1 = XEXP (XEXP (XEXP (x, 1), 0), 0);
- in2 = XEXP (XEXP (x, 1), 1);
- return simplify_gen_binary (PLUS, mode,
- simplify_gen_binary (MULT, mode,
- in1, in2),
- XEXP (x, 0));
- }
-
- /* Canonicalize (minus (neg A) (mult B C)) to
- (minus (mult (neg B) C) A). */
- if (GET_CODE (XEXP (x, 1)) == MULT
- && GET_CODE (XEXP (x, 0)) == NEG)
- {
- rtx in1, in2;
-
- in1 = simplify_gen_unary (NEG, mode, XEXP (XEXP (x, 1), 0), mode);
- in2 = XEXP (XEXP (x, 1), 1);
- return simplify_gen_binary (MINUS, mode,
- simplify_gen_binary (MULT, mode,
- in1, in2),
- XEXP (XEXP (x, 0), 0));
- }
-
- /* Canonicalize (minus A (plus B C)) to (minus (minus A B) C) for
- integers. */
- if (GET_CODE (XEXP (x, 1)) == PLUS && INTEGRAL_MODE_P (mode))
- return simplify_gen_binary (MINUS, mode,
- simplify_gen_binary (MINUS, mode,
- XEXP (x, 0),
- XEXP (XEXP (x, 1), 0)),
- XEXP (XEXP (x, 1), 1));
break;
case MULT:
case AND:
case IOR:
- case XOR:
return simplify_logical (x);
- case ABS:
- /* (abs (neg <foo>)) -> (abs <foo>) */
- if (GET_CODE (XEXP (x, 0)) == NEG)
- SUBST (XEXP (x, 0), XEXP (XEXP (x, 0), 0));
-
- /* If the mode of the operand is VOIDmode (i.e. if it is ASM_OPERANDS),
- do nothing. */
- if (GET_MODE (XEXP (x, 0)) == VOIDmode)
- break;
-
- /* If operand is something known to be positive, ignore the ABS. */
- if (GET_CODE (XEXP (x, 0)) == FFS || GET_CODE (XEXP (x, 0)) == ABS
- || ((GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))
- <= HOST_BITS_PER_WIDE_INT)
- && ((nonzero_bits (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
- & ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))) - 1)))
- == 0)))
- return XEXP (x, 0);
-
- /* If operand is known to be only -1 or 0, convert ABS to NEG. */
- if (num_sign_bit_copies (XEXP (x, 0), mode) == GET_MODE_BITSIZE (mode))
- return gen_rtx_NEG (mode, XEXP (x, 0));
-
- break;
-
- case FFS:
- /* (ffs (*_extend <X>)) = (ffs <X>) */
- if (GET_CODE (XEXP (x, 0)) == SIGN_EXTEND
- || GET_CODE (XEXP (x, 0)) == ZERO_EXTEND)
- SUBST (XEXP (x, 0), XEXP (XEXP (x, 0), 0));
- break;
-
- case POPCOUNT:
- case PARITY:
- /* (pop* (zero_extend <X>)) = (pop* <X>) */
- if (GET_CODE (XEXP (x, 0)) == ZERO_EXTEND)
- SUBST (XEXP (x, 0), XEXP (XEXP (x, 0), 0));
- break;
-
- case FLOAT:
- /* (float (sign_extend <X>)) = (float <X>). */
- if (GET_CODE (XEXP (x, 0)) == SIGN_EXTEND)
- SUBST (XEXP (x, 0), XEXP (XEXP (x, 0), 0));
- break;
-
case ASHIFT:
case LSHIFTRT:
case ASHIFTRT:
((HOST_WIDE_INT) 1
<< exact_log2 (GET_MODE_BITSIZE (GET_MODE (x))))
- 1,
- NULL_RTX, 0));
- break;
-
- case VEC_SELECT:
- {
- rtx op0 = XEXP (x, 0);
- rtx op1 = XEXP (x, 1);
- int len;
-
- gcc_assert (GET_CODE (op1) == PARALLEL);
- len = XVECLEN (op1, 0);
- if (len == 1
- && GET_CODE (XVECEXP (op1, 0, 0)) == CONST_INT
- && GET_CODE (op0) == VEC_CONCAT)
- {
- int offset = INTVAL (XVECEXP (op1, 0, 0)) * GET_MODE_SIZE (GET_MODE (x));
-
- /* Try to find the element in the VEC_CONCAT. */
- for (;;)
- {
- if (GET_MODE (op0) == GET_MODE (x))
- return op0;
- if (GET_CODE (op0) == VEC_CONCAT)
- {
- HOST_WIDE_INT op0_size = GET_MODE_SIZE (GET_MODE (XEXP (op0, 0)));
- if (offset < op0_size)
- op0 = XEXP (op0, 0);
- else
- {
- offset -= op0_size;
- op0 = XEXP (op0, 1);
- }
- }
- else
- break;
- }
- }
- }
-
+ 0));
break;
default:
if (GET_MODE_CLASS (mode) == MODE_INT
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
{
- src = force_to_mode (src, mode, ~(HOST_WIDE_INT) 0, NULL_RTX, 0);
+ src = force_to_mode (src, mode, ~(HOST_WIDE_INT) 0, 0);
SUBST (SET_SRC (x), src);
}
tmp = simplify_relational_operation (old_code, compare_mode, VOIDmode,
op0, op1);
if (!tmp)
- new_code = old_code;
+ new_code = old_code;
else if (!CONSTANT_P (tmp))
- {
- new_code = GET_CODE (tmp);
- op0 = XEXP (tmp, 0);
- op1 = XEXP (tmp, 1);
- }
+ {
+ new_code = GET_CODE (tmp);
+ op0 = XEXP (tmp, 0);
+ op1 = XEXP (tmp, 1);
+ }
else
{
rtx pat = PATTERN (other_insn);
if (can_change_dest_mode (dest, 0, compare_mode))
{
unsigned int regno = REGNO (dest);
- rtx new_dest = gen_rtx_REG (compare_mode, regno);
+ rtx new_dest;
- if (regno >= FIRST_PSEUDO_REGISTER)
- SUBST (regno_reg_rtx[regno], new_dest);
+ if (regno < FIRST_PSEUDO_REGISTER)
+ new_dest = gen_rtx_REG (compare_mode, regno);
+ else
+ {
+ SUBST_MODE (regno_reg_rtx[regno], compare_mode);
+ new_dest = regno_reg_rtx[regno];
+ }
SUBST (SET_DEST (x), new_dest);
SUBST (XEXP (*cc_use, 0), new_dest);
{
SUBST(SET_SRC (x), op0);
src = SET_SRC (x);
- }
+ }
else
{
/* Otherwise, update the COMPARE if needed. */
+ (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))
#ifndef WORD_REGISTER_OPERATIONS
&& (GET_MODE_SIZE (GET_MODE (src))
- < GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
+ < GET_MODE_SIZE (GET_MODE (SUBREG_REG (src))))
#endif
#ifdef CANNOT_CHANGE_MODE_CLASS
&& ! (REG_P (dest) && REGNO (dest) < FIRST_PSEUDO_REGISTER
enum machine_mode mode = GET_MODE (x);
rtx op0 = XEXP (x, 0);
rtx op1 = XEXP (x, 1);
- rtx reversed;
switch (GET_CODE (x))
{
case AND:
- /* Convert (A ^ B) & A to A & (~B) since the latter is often a single
- insn (and may simplify more). */
- if (GET_CODE (op0) == XOR
- && rtx_equal_p (XEXP (op0, 0), op1)
- && ! side_effects_p (op1))
- x = simplify_gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode,
- XEXP (op0, 1), mode),
- op1);
-
- if (GET_CODE (op0) == XOR
- && rtx_equal_p (XEXP (op0, 1), op1)
- && ! side_effects_p (op1))
- x = simplify_gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode,
- XEXP (op0, 0), mode),
- op1);
-
- /* Similarly for (~(A ^ B)) & A. */
- if (GET_CODE (op0) == NOT
- && GET_CODE (XEXP (op0, 0)) == XOR
- && rtx_equal_p (XEXP (XEXP (op0, 0), 0), op1)
- && ! side_effects_p (op1))
- x = simplify_gen_binary (AND, mode, XEXP (XEXP (op0, 0), 1), op1);
-
- if (GET_CODE (op0) == NOT
- && GET_CODE (XEXP (op0, 0)) == XOR
- && rtx_equal_p (XEXP (XEXP (op0, 0), 1), op1)
- && ! side_effects_p (op1))
- x = simplify_gen_binary (AND, mode, XEXP (XEXP (op0, 0), 0), op1);
-
/* We can call simplify_and_const_int only if we don't lose
any (sign) bits when converting INTVAL (op1) to
"unsigned HOST_WIDE_INT". */
|| INTVAL (op1) > 0))
{
x = simplify_and_const_int (x, mode, op0, INTVAL (op1));
-
- /* If we have (ior (and (X C1) C2)) and the next restart would be
- the last, simplify this by making C1 as small as possible
- and then exit. Only do this if C1 actually changes: for now
- this only saves memory but, should this transformation be
- moved to simplify-rtx.c, we'd risk unbounded recursion there. */
- if (GET_CODE (x) == IOR && GET_CODE (op0) == AND
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
- && GET_CODE (op1) == CONST_INT
- && (INTVAL (XEXP (op0, 1)) & INTVAL (op1)) != 0)
- return simplify_gen_binary (IOR, mode,
- simplify_gen_binary
- (AND, mode, XEXP (op0, 0),
- GEN_INT (INTVAL (XEXP (op0, 1))
- & ~INTVAL (op1))), op1);
-
if (GET_CODE (x) != AND)
return x;
op1 = XEXP (x, 1);
}
- /* Convert (A | B) & A to A. */
- if (GET_CODE (op0) == IOR
- && (rtx_equal_p (XEXP (op0, 0), op1)
- || rtx_equal_p (XEXP (op0, 1), op1))
- && ! side_effects_p (XEXP (op0, 0))
- && ! side_effects_p (XEXP (op0, 1)))
- return op1;
-
/* If we have any of (and (ior A B) C) or (and (xor A B) C),
apply the distributive law and then the inverse distributive
law to see if things simplify. */
break;
case IOR:
- /* (ior A C) is C if all bits of A that might be nonzero are on in C. */
- if (GET_CODE (op1) == CONST_INT
- && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && (nonzero_bits (op0, mode) & ~INTVAL (op1)) == 0)
- return op1;
-
- /* Convert (A & B) | A to A. */
- if (GET_CODE (op0) == AND
- && (rtx_equal_p (XEXP (op0, 0), op1)
- || rtx_equal_p (XEXP (op0, 1), op1))
- && ! side_effects_p (XEXP (op0, 0))
- && ! side_effects_p (XEXP (op0, 1)))
- return op1;
-
/* If we have (ior (and A B) C), apply the distributive law and then
the inverse distributive law to see if things simplify. */
return result;
}
- if (GET_CODE (op1) == AND)
- {
- rtx result = distribute_and_simplify_rtx (x, 1);
- if (result)
- return result;
- }
-
- /* Convert (ior (ashift A CX) (lshiftrt A CY)) where CX+CY equals the
- mode size to (rotate A CX). */
-
- if (((GET_CODE (op0) == ASHIFT && GET_CODE (op1) == LSHIFTRT)
- || (GET_CODE (op1) == ASHIFT && GET_CODE (op0) == LSHIFTRT))
- && rtx_equal_p (XEXP (op0, 0), XEXP (op1, 0))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
- && GET_CODE (XEXP (op1, 1)) == CONST_INT
- && (INTVAL (XEXP (op0, 1)) + INTVAL (XEXP (op1, 1))
- == GET_MODE_BITSIZE (mode)))
- return gen_rtx_ROTATE (mode, XEXP (op0, 0),
- (GET_CODE (op0) == ASHIFT
- ? XEXP (op0, 1) : XEXP (op1, 1)));
-
- /* If OP0 is (ashiftrt (plus ...) C), it might actually be
- a (sign_extend (plus ...)). If so, OP1 is a CONST_INT, and the PLUS
- does not affect any of the bits in OP1, it can really be done
- as a PLUS and we can associate. We do this by seeing if OP1
- can be safely shifted left C bits. */
- if (GET_CODE (op1) == CONST_INT && GET_CODE (op0) == ASHIFTRT
- && GET_CODE (XEXP (op0, 0)) == PLUS
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
- && INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT)
- {
- int count = INTVAL (XEXP (op0, 1));
- HOST_WIDE_INT mask = INTVAL (op1) << count;
-
- if (mask >> count == INTVAL (op1)
- && (mask & nonzero_bits (XEXP (op0, 0), mode)) == 0)
- {
- SUBST (XEXP (XEXP (op0, 0), 1),
- GEN_INT (INTVAL (XEXP (XEXP (op0, 0), 1)) | mask));
- return op0;
- }
- }
- break;
-
- case XOR:
- /* If we are XORing two things that have no bits in common,
- convert them into an IOR. This helps to detect rotation encoded
- using those methods and possibly other simplifications. */
-
- if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && (nonzero_bits (op0, mode)
- & nonzero_bits (op1, mode)) == 0)
- return (simplify_gen_binary (IOR, mode, op0, op1));
-
- /* Convert (XOR (NOT x) (NOT y)) to (XOR x y).
- Also convert (XOR (NOT x) y) to (NOT (XOR x y)), similarly for
- (NOT y). */
- {
- int num_negated = 0;
-
- if (GET_CODE (op0) == NOT)
- num_negated++, op0 = XEXP (op0, 0);
- if (GET_CODE (op1) == NOT)
- num_negated++, op1 = XEXP (op1, 0);
-
- if (num_negated == 2)
- {
- SUBST (XEXP (x, 0), op0);
- SUBST (XEXP (x, 1), op1);
- }
- else if (num_negated == 1)
- return
- simplify_gen_unary (NOT, mode,
- simplify_gen_binary (XOR, mode, op0, op1),
- mode);
- }
-
- /* Convert (xor (and A B) B) to (and (not A) B). The latter may
- correspond to a machine insn or result in further simplifications
- if B is a constant. */
-
- if (GET_CODE (op0) == AND
- && rtx_equal_p (XEXP (op0, 1), op1)
- && ! side_effects_p (op1))
- return simplify_gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode,
- XEXP (op0, 0), mode),
- op1);
-
- else if (GET_CODE (op0) == AND
- && rtx_equal_p (XEXP (op0, 0), op1)
- && ! side_effects_p (op1))
- return simplify_gen_binary (AND, mode,
- simplify_gen_unary (NOT, mode,
- XEXP (op0, 1), mode),
- op1);
-
- /* (xor (comparison foo bar) (const_int 1)) can become the reversed
- comparison if STORE_FLAG_VALUE is 1. */
- if (STORE_FLAG_VALUE == 1
- && op1 == const1_rtx
- && COMPARISON_P (op0)
- && (reversed = reversed_comparison (op0, mode)))
- return reversed;
-
- /* (lshiftrt foo C) where C is the number of bits in FOO minus 1
- is (lt foo (const_int 0)), so we can perform the above
- simplification if STORE_FLAG_VALUE is 1. */
-
- if (STORE_FLAG_VALUE == 1
- && op1 == const1_rtx
- && GET_CODE (op0) == LSHIFTRT
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
- && INTVAL (XEXP (op0, 1)) == GET_MODE_BITSIZE (mode) - 1)
- return gen_rtx_GE (mode, XEXP (op0, 0), const0_rtx);
-
- /* (xor (comparison foo bar) (const_int sign-bit))
- when STORE_FLAG_VALUE is the sign bit. */
- if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && ((STORE_FLAG_VALUE & GET_MODE_MASK (mode))
- == (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1))
- && op1 == const_true_rtx
- && COMPARISON_P (op0)
- && (reversed = reversed_comparison (op0, mode)))
- return reversed;
-
+ if (GET_CODE (op1) == AND)
+ {
+ rtx result = distribute_and_simplify_rtx (x, 1);
+ if (result)
+ return result;
+ }
break;
default:
len = INTVAL (XEXP (x, 1));
pos = INTVAL (XEXP (x, 2));
- /* If this goes outside the object being extracted, replace the object
- with a (use (mem ...)) construct that only combine understands
- and is used only for this purpose. */
+ /* This should stay within the object being extracted, fail otherwise. */
if (len + pos > GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))))
- SUBST (XEXP (x, 0), gen_rtx_USE (GET_MODE (x), XEXP (x, 0)));
+ return x;
if (BITS_BIG_ENDIAN)
pos = GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))) - len - pos;
if (GET_CODE (x) == ZERO_EXTEND)
{
/* (zero_extend:DI (truncate:SI foo:DI)) is just foo:DI if we
- know that the last value didn't have any inappropriate bits
- set. */
+ know that the last value didn't have any inappropriate bits
+ set. */
if (GET_CODE (XEXP (x, 0)) == TRUNCATE
&& GET_MODE (XEXP (XEXP (x, 0), 0)) == GET_MODE (x)
&& GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT
return SUBREG_REG (XEXP (x, 0));
/* (zero_extend:DI (truncate:SI foo:DI)) is just foo:DI when foo
- is a comparison and STORE_FLAG_VALUE permits. This is like
- the first case, but it works even when GET_MODE (x) is larger
- than HOST_WIDE_INT. */
+ is a comparison and STORE_FLAG_VALUE permits. This is like
+ the first case, but it works even when GET_MODE (x) is larger
+ than HOST_WIDE_INT. */
if (GET_CODE (XEXP (x, 0)) == TRUNCATE
&& GET_MODE (XEXP (XEXP (x, 0), 0)) == GET_MODE (x)
&& COMPARISON_P (XEXP (XEXP (x, 0), 0))
modewidth = GET_MODE_BITSIZE (GET_MODE (x));
if (modewidth + len >= pos)
- tem = simplify_shift_const (NULL_RTX, unsignedp ? LSHIFTRT : ASHIFTRT,
- GET_MODE (x),
- simplify_shift_const (NULL_RTX, ASHIFT,
- GET_MODE (x),
- XEXP (x, 0),
- modewidth - pos - len),
- modewidth - len);
-
+ {
+ enum machine_mode mode = GET_MODE (x);
+ tem = gen_lowpart (mode, XEXP (x, 0));
+ if (!tem || GET_CODE (tem) == CLOBBER)
+ return x;
+ tem = simplify_shift_const (NULL_RTX, ASHIFT, mode,
+ tem, modewidth - pos - len);
+ tem = simplify_shift_const (NULL_RTX, unsignedp ? LSHIFTRT : ASHIFTRT,
+ mode, tem, modewidth - len);
+ }
else if (unsignedp && len < HOST_BITS_PER_WIDE_INT)
tem = simplify_and_const_int (NULL_RTX, GET_MODE (x),
simplify_shift_const (NULL_RTX, LSHIFTRT,
len = INTVAL (XEXP (SET_DEST (x), 1));
pos = XEXP (SET_DEST (x), 2);
- /* If the position is constant and spans the width of INNER,
- surround INNER with a USE to indicate this. */
+ /* A constant position should stay within the width of INNER. */
if (GET_CODE (pos) == CONST_INT
&& INTVAL (pos) + len > GET_MODE_BITSIZE (GET_MODE (inner)))
- inner = gen_rtx_USE (GET_MODE (SET_DEST (x)), inner);
+ break;
if (BITS_BIG_ENDIAN)
{
it is an RTX that represents a variable starting position; otherwise,
POS is the (constant) starting bit position (counted from the LSB).
- INNER may be a USE. This will occur when we started with a bitfield
- that went outside the boundary of the object in memory, which is
- allowed on most machines. To isolate this case, we produce a USE
- whose mode is wide enough and surround the MEM with it. The only
- code that understands the USE is this routine. If it is not removed,
- it will cause the resulting insn not to match.
-
UNSIGNEDP is nonzero for an unsigned reference and zero for a
signed reference.
ignore the POS lowest bits, etc. */
enum machine_mode is_mode = GET_MODE (inner);
enum machine_mode inner_mode;
- enum machine_mode wanted_inner_mode = byte_mode;
+ enum machine_mode wanted_inner_mode;
enum machine_mode wanted_inner_reg_mode = word_mode;
enum machine_mode pos_mode = word_mode;
enum machine_mode extraction_mode = word_mode;
enum machine_mode tmode = mode_for_size (len, MODE_INT, 1);
- int spans_byte = 0;
rtx new = 0;
rtx orig_pos_rtx = pos_rtx;
HOST_WIDE_INT orig_pos;
- /* Get some information about INNER and get the innermost object. */
- if (GET_CODE (inner) == USE)
- /* (use:SI (mem:QI foo)) stands for (mem:SI foo). */
- /* We don't need to adjust the position because we set up the USE
- to pretend that it was a full-word object. */
- spans_byte = 1, inner = XEXP (inner, 0);
- else if (GET_CODE (inner) == SUBREG && subreg_lowpart_p (inner))
+ if (GET_CODE (inner) == SUBREG && subreg_lowpart_p (inner))
{
/* If going from (subreg:SI (mem:QI ...)) to (mem:QI ...),
consider just the QI as the memory to extract from.
appropriate STRICT_LOW_PART operation available.
For MEM, we can avoid an extract if the field starts on an appropriate
- boundary and we can change the mode of the memory reference. However,
- we cannot directly access the MEM if we have a USE and the underlying
- MEM is not TMODE. This combination means that MEM was being used in a
- context where bits outside its mode were being referenced; that is only
- valid in bit-field insns. */
+ boundary and we can change the mode of the memory reference. */
if (tmode != BLKmode
- && ! (spans_byte && inner_mode != tmode)
&& ((pos_rtx == 0 && (pos % BITS_PER_WORD) == 0
&& !MEM_P (inner)
+ && (inner_mode == tmode
+ || !REG_P (inner)
+ || TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (tmode),
+ GET_MODE_BITSIZE (inner_mode))
+ || reg_truncated_to_mode (tmode, inner))
&& (! in_dest
|| (REG_P (inner)
&& have_insn_for (STRICT_LOW_PART, tmode))))
len >= HOST_BITS_PER_WIDE_INT
? ~(unsigned HOST_WIDE_INT) 0
: ((unsigned HOST_WIDE_INT) 1 << len) - 1,
- NULL_RTX, 0);
+ 0);
/* If this extraction is going into the destination of a SET,
make a STRICT_LOW_PART unless we made a MEM. */
don't do anything with zero-extending field extracts starting at
the low-order bit since they are simple AND operations. */
if (pos_rtx == 0 && pos == 0 && ! in_dest
- && ! in_compare && ! spans_byte && unsignedp)
+ && ! in_compare && unsignedp)
return 0;
- /* Unless we are allowed to span bytes or INNER is not MEM, reject this if
- we would be spanning bytes or if the position is not a constant and the
- length is not 1. In all other cases, we would only be going outside
- our object in cases when an original shift would have been
- undefined. */
- if (! spans_byte && MEM_P (inner)
+ /* Unless INNER is not MEM, reject this if we would be spanning bytes or
+ if the position is not a constant and the length is not 1. In all
+ other cases, we would only be going outside our object in cases when
+ an original shift would have been undefined. */
+ if (MEM_P (inner)
&& ((pos_rtx == 0 && pos + len > GET_MODE_BITSIZE (is_mode))
|| (pos_rtx != 0 && len != 1)))
return 0;
&& GET_MODE_SIZE (pos_mode) < GET_MODE_SIZE (GET_MODE (pos_rtx)))
pos_mode = GET_MODE (pos_rtx);
- /* If this is not from memory, the desired mode is wanted_inner_reg_mode;
- if we have to change the mode of memory and cannot, the desired mode is
- EXTRACTION_MODE. */
+ /* If this is not from memory, the desired mode is the preferred mode
+ for an extraction pattern's first input operand, or word_mode if there
+ is none. */
if (!MEM_P (inner))
wanted_inner_mode = wanted_inner_reg_mode;
- else if (inner_mode != wanted_inner_mode
- && (mode_dependent_address_p (XEXP (inner, 0))
- || MEM_VOLATILE_P (inner)))
- wanted_inner_mode = extraction_mode;
+ else
+ {
+ /* Be careful not to go beyond the extracted object and maintain the
+ natural alignment of the memory. */
+ wanted_inner_mode = smallest_mode_for_size (len, MODE_INT);
+ while (pos % GET_MODE_BITSIZE (wanted_inner_mode) + len
+ > GET_MODE_BITSIZE (wanted_inner_mode))
+ {
+ wanted_inner_mode = GET_MODE_WIDER_MODE (wanted_inner_mode);
+ gcc_assert (wanted_inner_mode != VOIDmode);
+ }
+
+ /* If we have to change the mode of memory and cannot, the desired mode
+ is EXTRACTION_MODE. */
+ if (inner_mode != wanted_inner_mode
+ && (mode_dependent_address_p (XEXP (inner, 0))
+ || MEM_VOLATILE_P (inner)
+ || pos_rtx))
+ wanted_inner_mode = extraction_mode;
+ }
orig_pos = pos;
Note that it can only be less than 0 if !MEM_P (inner). */
}
- /* If INNER has a wider mode, make it smaller. If this is a constant
- extract, try to adjust the byte to point to the byte containing
+ /* If INNER has a wider mode, and this is a constant extraction, try to
+ make it smaller and adjust the byte to point to the byte containing
the value. */
if (wanted_inner_mode != VOIDmode
+ && inner_mode != wanted_inner_mode
+ && ! pos_rtx
&& GET_MODE_SIZE (wanted_inner_mode) < GET_MODE_SIZE (is_mode)
- && ((MEM_P (inner)
- && (inner_mode == wanted_inner_mode
- || (! mode_dependent_address_p (XEXP (inner, 0))
- && ! MEM_VOLATILE_P (inner))))))
+ && MEM_P (inner)
+ && ! mode_dependent_address_p (XEXP (inner, 0))
+ && ! MEM_VOLATILE_P (inner))
{
int offset = 0;
/* If bytes are big endian and we had a paradoxical SUBREG, we must
adjust OFFSET to compensate. */
if (BYTES_BIG_ENDIAN
- && ! spans_byte
&& GET_MODE_SIZE (inner_mode) < GET_MODE_SIZE (is_mode))
offset -= GET_MODE_SIZE (is_mode) - GET_MODE_SIZE (inner_mode);
- /* If this is a constant position, we can move to the desired byte.
- Be careful not to go beyond the original object and maintain the
- natural alignment of the memory. */
- if (pos_rtx == 0)
- {
- enum machine_mode bfmode = smallest_mode_for_size (len, MODE_INT);
- offset += (pos / GET_MODE_BITSIZE (bfmode)) * GET_MODE_SIZE (bfmode);
- pos %= GET_MODE_BITSIZE (bfmode);
- }
+ /* We can now move to the desired byte. */
+ offset += (pos / GET_MODE_BITSIZE (wanted_inner_mode))
+ * GET_MODE_SIZE (wanted_inner_mode);
+ pos %= GET_MODE_BITSIZE (wanted_inner_mode);
if (BYTES_BIG_ENDIAN != BITS_BIG_ENDIAN
- && ! spans_byte
&& is_mode != wanted_inner_mode)
offset = (GET_MODE_SIZE (is_mode)
- GET_MODE_SIZE (wanted_inner_mode) - offset);
- if (offset != 0 || inner_mode != wanted_inner_mode)
- inner = adjust_address_nv (inner, wanted_inner_mode, offset);
+ inner = adjust_address_nv (inner, wanted_inner_mode, offset);
}
/* If INNER is not memory, we can always get it into the proper mode. If we
|| orig_pos + len > GET_MODE_BITSIZE (wanted_inner_mode)))
return 0;
+ if (orig_pos < 0)
+ return 0;
+
inner = force_to_mode (inner, wanted_inner_mode,
pos_rtx
|| len + orig_pos >= HOST_BITS_PER_WIDE_INT
? ~(unsigned HOST_WIDE_INT) 0
: ((((unsigned HOST_WIDE_INT) 1 << len) - 1)
<< orig_pos),
- NULL_RTX, 0);
+ 0);
}
/* Adjust mode of POS_RTX, if needed. If we want a wider mode, we
&& subreg_lowpart_p (x))
{
rtx newer = force_to_mode (tem, mode, ~(HOST_WIDE_INT) 0,
- NULL_RTX, 0);
-
+ 0);
+
/* If we have something other than a SUBREG, we might have
done an expansion, so rerun ourselves. */
if (GET_CODE (newer) != SUBREG)
newer = make_compound_operation (newer, in_code);
-
+
return newer;
}
SUBST (XEXP (x, i), new);
}
+ /* If this is a commutative operation, the changes to the operands
+ may have made it noncanonical. */
+ if (COMMUTATIVE_ARITH_P (x)
+ && swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
+ {
+ tem = XEXP (x, 0);
+ SUBST (XEXP (x, 0), XEXP (x, 1));
+ SUBST (XEXP (x, 1), tem);
+ }
+
return x;
}
\f
return pos;
}
\f
+/* If X refers to a register that equals REG in value, replace these
+ references with REG. */
+static rtx
+canon_reg_for_combine (rtx x, rtx reg)
+{
+ rtx op0, op1, op2;
+ const char *fmt;
+ int i;
+ bool copied;
+
+ enum rtx_code code = GET_CODE (x);
+ switch (GET_RTX_CLASS (code))
+ {
+ case RTX_UNARY:
+ op0 = canon_reg_for_combine (XEXP (x, 0), reg);
+ if (op0 != XEXP (x, 0))
+ return simplify_gen_unary (GET_CODE (x), GET_MODE (x), op0,
+ GET_MODE (reg));
+ break;
+
+ case RTX_BIN_ARITH:
+ case RTX_COMM_ARITH:
+ op0 = canon_reg_for_combine (XEXP (x, 0), reg);
+ op1 = canon_reg_for_combine (XEXP (x, 1), reg);
+ if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
+ return simplify_gen_binary (GET_CODE (x), GET_MODE (x), op0, op1);
+ break;
+
+ case RTX_COMPARE:
+ case RTX_COMM_COMPARE:
+ op0 = canon_reg_for_combine (XEXP (x, 0), reg);
+ op1 = canon_reg_for_combine (XEXP (x, 1), reg);
+ if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
+ return simplify_gen_relational (GET_CODE (x), GET_MODE (x),
+ GET_MODE (op0), op0, op1);
+ break;
+
+ case RTX_TERNARY:
+ case RTX_BITFIELD_OPS:
+ op0 = canon_reg_for_combine (XEXP (x, 0), reg);
+ op1 = canon_reg_for_combine (XEXP (x, 1), reg);
+ op2 = canon_reg_for_combine (XEXP (x, 2), reg);
+ if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1) || op2 != XEXP (x, 2))
+ return simplify_gen_ternary (GET_CODE (x), GET_MODE (x),
+ GET_MODE (op0), op0, op1, op2);
+
+ case RTX_OBJ:
+ if (REG_P (x))
+ {
+ if (rtx_equal_p (get_last_value (reg), x)
+ || rtx_equal_p (reg, get_last_value (x)))
+ return reg;
+ else
+ break;
+ }
+
+ /* fall through */
+
+ default:
+ fmt = GET_RTX_FORMAT (code);
+ copied = false;
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (fmt[i] == 'e')
+ {
+ rtx op = canon_reg_for_combine (XEXP (x, i), reg);
+ if (op != XEXP (x, i))
+ {
+ if (!copied)
+ {
+ copied = true;
+ x = copy_rtx (x);
+ }
+ XEXP (x, i) = op;
+ }
+ }
+ else if (fmt[i] == 'E')
+ {
+ int j;
+ for (j = 0; j < XVECLEN (x, i); j++)
+ {
+ rtx op = canon_reg_for_combine (XVECEXP (x, i, j), reg);
+ if (op != XVECEXP (x, i, j))
+ {
+ if (!copied)
+ {
+ copied = true;
+ x = copy_rtx (x);
+ }
+ XVECEXP (x, i, j) = op;
+ }
+ }
+ }
+
+ break;
+ }
+
+ return x;
+}
+
+/* Return X converted to MODE. If the value is already truncated to
+ MODE we can just return a subreg even though in the general case we
+ would need an explicit truncation. */
+
+static rtx
+gen_lowpart_or_truncate (enum machine_mode mode, rtx x)
+{
+ if (GET_MODE_SIZE (GET_MODE (x)) <= GET_MODE_SIZE (mode)
+ || TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
+ GET_MODE_BITSIZE (GET_MODE (x)))
+ || (REG_P (x) && reg_truncated_to_mode (mode, x)))
+ return gen_lowpart (mode, x);
+ else
+ return simplify_gen_unary (TRUNCATE, mode, x, GET_MODE (x));
+}
+
/* See if X can be simplified knowing that we will only refer to it in
MODE and will only refer to those bits that are nonzero in MASK.
If other bits are being computed or if masking operations are done
Return a possibly simplified expression, but always convert X to
MODE. If X is a CONST_INT, AND the CONST_INT with MASK.
- Also, if REG is nonzero and X is a register equal in value to REG,
- replace X with REG.
-
If JUST_SELECT is nonzero, don't optimize by noticing that bits in MASK
are all off in X. This is used when X will be complemented, by either
NOT, NEG, or XOR. */
static rtx
force_to_mode (rtx x, enum machine_mode mode, unsigned HOST_WIDE_INT mask,
- rtx reg, int just_select)
+ int just_select)
{
enum rtx_code code = GET_CODE (x);
int next_select = just_select || code == XOR || code == NOT || code == NEG;
if (GET_CODE (x) == CONST_INT)
{
if (SCALAR_INT_MODE_P (mode))
- return gen_int_mode (INTVAL (x) & mask, mode);
+ return gen_int_mode (INTVAL (x) & mask, mode);
else
{
x = GEN_INT (INTVAL (x) & mask);
generating something that won't match. */
return x;
- case USE:
- /* X is a (use (mem ..)) that was made from a bit-field extraction that
- spanned the boundary of the MEM. If we are now masking so it is
- within that boundary, we don't need the USE any more. */
- if (! BITS_BIG_ENDIAN
- && (mask & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
- return force_to_mode (XEXP (x, 0), mode, mask, reg, next_select);
- break;
-
case SIGN_EXTEND:
case ZERO_EXTEND:
case ZERO_EXTRACT:
case SIGN_EXTRACT:
x = expand_compound_operation (x);
if (GET_CODE (x) != code)
- return force_to_mode (x, mode, mask, reg, next_select);
- break;
-
- case REG:
- if (reg != 0 && (rtx_equal_p (get_last_value (reg), x)
- || rtx_equal_p (reg, get_last_value (x))))
- x = reg;
+ return force_to_mode (x, mode, mask, next_select);
break;
case SUBREG:
|| (0 == (mask
& GET_MODE_MASK (GET_MODE (x))
& ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x)))))))
- return force_to_mode (SUBREG_REG (x), mode, mask, reg, next_select);
+ return force_to_mode (SUBREG_REG (x), mode, mask, next_select);
break;
case AND:
&& (INTVAL (XEXP (x, 1)) & ~smask) != 0)
return force_to_mode (plus_constant (XEXP (x, 0),
(INTVAL (XEXP (x, 1)) & smask)),
- mode, smask, reg, next_select);
+ mode, smask, next_select);
}
/* ... fall through ... */
{
x = simplify_gen_unary (NEG, GET_MODE (x), XEXP (x, 1),
GET_MODE (x));
- return force_to_mode (x, mode, mask, reg, next_select);
+ return force_to_mode (x, mode, mask, next_select);
}
/* Similarly, if C contains every bit in the fuller_mask, then we may
{
x = simplify_gen_unary (NOT, GET_MODE (x),
XEXP (x, 1), GET_MODE (x));
- return force_to_mode (x, mode, mask, reg, next_select);
+ return force_to_mode (x, mode, mask, next_select);
}
mask = fuller_mask;
XEXP (XEXP (x, 0), 0), temp);
x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), temp,
XEXP (XEXP (x, 0), 1));
- return force_to_mode (x, mode, mask, reg, next_select);
+ return force_to_mode (x, mode, mask, next_select);
}
binop:
/* For most binary operations, just propagate into the operation and
change the mode if we have an operation of that mode. */
- op0 = gen_lowpart (op_mode,
- force_to_mode (XEXP (x, 0), mode, mask,
- reg, next_select));
- op1 = gen_lowpart (op_mode,
- force_to_mode (XEXP (x, 1), mode, mask,
- reg, next_select));
+ op0 = gen_lowpart_or_truncate (op_mode,
+ force_to_mode (XEXP (x, 0), mode, mask,
+ next_select));
+ op1 = gen_lowpart_or_truncate (op_mode,
+ force_to_mode (XEXP (x, 1), mode, mask,
+ next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
x = simplify_gen_binary (code, op_mode, op0, op1);
else
mask = fuller_mask;
- op0 = gen_lowpart (op_mode,
- force_to_mode (XEXP (x, 0), op_mode,
- mask, reg, next_select));
+ op0 = gen_lowpart_or_truncate (op_mode,
+ force_to_mode (XEXP (x, 0), op_mode,
+ mask, next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0))
x = simplify_gen_binary (code, op_mode, op0, XEXP (x, 1));
if ((inner_mask & ~GET_MODE_MASK (GET_MODE (x))) != 0)
op_mode = GET_MODE (x);
- inner = force_to_mode (inner, op_mode, inner_mask, reg, next_select);
+ inner = force_to_mode (inner, op_mode, inner_mask, next_select);
if (GET_MODE (x) != op_mode || inner != XEXP (x, 0))
x = simplify_gen_binary (LSHIFTRT, op_mode, inner, XEXP (x, 1));
if (GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT
&& (mask == ((unsigned HOST_WIDE_INT) 1
<< (GET_MODE_BITSIZE (GET_MODE (x)) - 1))))
- return force_to_mode (XEXP (x, 0), mode, mask, reg, next_select);
+ return force_to_mode (XEXP (x, 0), mode, mask, next_select);
/* If this is a shift by a constant, get a mask that contains those bits
that are not copies of the sign bit. We then have two cases: If
if (GET_CODE (XEXP (x, 1)) == CONST_INT && INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT)
{
- int i = -1;
+ int i;
/* If the considered data is wider than HOST_WIDE_INT, we can't
represent a mask for all its bits in a single scalar.
nonzero >>= INTVAL (XEXP (x, 1));
}
- if ((mask & ~nonzero) == 0
- || (i = exact_log2 (mask)) >= 0)
+ if ((mask & ~nonzero) == 0)
+ {
+ x = simplify_shift_const (NULL_RTX, LSHIFTRT, GET_MODE (x),
+ XEXP (x, 0), INTVAL (XEXP (x, 1)));
+ if (GET_CODE (x) != ASHIFTRT)
+ return force_to_mode (x, mode, mask, next_select);
+ }
+
+ else if ((i = exact_log2 (mask)) >= 0)
{
x = simplify_shift_const
- (x, LSHIFTRT, GET_MODE (x), XEXP (x, 0),
- i < 0 ? INTVAL (XEXP (x, 1))
- : GET_MODE_BITSIZE (GET_MODE (x)) - 1 - i);
+ (NULL_RTX, LSHIFTRT, GET_MODE (x), XEXP (x, 0),
+ GET_MODE_BITSIZE (GET_MODE (x)) - 1 - i);
if (GET_CODE (x) != ASHIFTRT)
- return force_to_mode (x, mode, mask, reg, next_select);
+ return force_to_mode (x, mode, mask, next_select);
}
}
&& GET_CODE (XEXP (x, 0)) == ASHIFT
&& XEXP (XEXP (x, 0), 1) == XEXP (x, 1))
return force_to_mode (XEXP (XEXP (x, 0), 0), mode, mask,
- reg, next_select);
+ next_select);
break;
if (temp && GET_CODE (temp) == CONST_INT)
SUBST (XEXP (x, 0),
force_to_mode (XEXP (x, 0), GET_MODE (x),
- INTVAL (temp), reg, next_select));
+ INTVAL (temp), next_select));
}
break;
/* If we just want the low-order bit, the NEG isn't needed since it
won't change the low-order bit. */
if (mask == 1)
- return force_to_mode (XEXP (x, 0), mode, mask, reg, just_select);
+ return force_to_mode (XEXP (x, 0), mode, mask, just_select);
/* We need any bits less significant than the most significant bit in
MASK since carries from those bits will affect the bits we are
x = simplify_gen_binary (LSHIFTRT, GET_MODE (x),
temp, XEXP (XEXP (x, 0), 1));
- return force_to_mode (x, mode, mask, reg, next_select);
+ return force_to_mode (x, mode, mask, next_select);
}
/* (and (not FOO) CONST) is (not (or FOO (not CONST))), so we must
mask = fuller_mask;
unop:
- op0 = gen_lowpart (op_mode,
- force_to_mode (XEXP (x, 0), mode, mask,
- reg, next_select));
+ op0 = gen_lowpart_or_truncate (op_mode,
+ force_to_mode (XEXP (x, 0), mode, mask,
+ next_select));
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0))
x = simplify_gen_unary (code, op_mode, op0, op_mode);
break;
&& exact_log2 (nonzero_bits (XEXP (x, 0), mode)) >= 0
&& (nonzero_bits (XEXP (x, 0), mode)
== (unsigned HOST_WIDE_INT) STORE_FLAG_VALUE))
- return force_to_mode (XEXP (x, 0), mode, mask, reg, next_select);
+ return force_to_mode (XEXP (x, 0), mode, mask, next_select);
break;
written in a narrower mode. We play it safe and do not do so. */
SUBST (XEXP (x, 1),
- gen_lowpart (GET_MODE (x),
+ gen_lowpart_or_truncate (GET_MODE (x),
force_to_mode (XEXP (x, 1), mode,
- mask, reg, next_select)));
+ mask, next_select)));
SUBST (XEXP (x, 2),
- gen_lowpart (GET_MODE (x),
+ gen_lowpart_or_truncate (GET_MODE (x),
force_to_mode (XEXP (x, 2), mode,
- mask, reg, next_select)));
+ mask, next_select)));
break;
default:
}
/* Ensure we return a value of the proper mode. */
- return gen_lowpart (mode, x);
+ return gen_lowpart_or_truncate (mode, x);
}
\f
/* Return nonzero if X is an expression that has one of two values depending on
*ptrue = simplify_gen_relational (code, mode, VOIDmode,
true0, true1);
*pfalse = simplify_gen_relational (code, mode, VOIDmode,
- false0, false1);
+ false0, false1);
}
else
{
if (XEXP (x, 0) != r)
{
/* We must simplify the zero_extend here, before we lose
- track of the original inner_mode. */
+ track of the original inner_mode. */
new = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
r, inner_mode);
if (new)
/* Shift OTHER right POS places and make it the source, restricting it
to the proper length and mode. */
- src = force_to_mode (simplify_shift_const (NULL_RTX, LSHIFTRT,
- GET_MODE (src), other, pos),
- mode,
+ src = canon_reg_for_combine (simplify_shift_const (NULL_RTX, LSHIFTRT,
+ GET_MODE (src),
+ other, pos),
+ dest);
+ src = force_to_mode (src, mode,
GET_MODE_BITSIZE (mode) >= HOST_BITS_PER_WIDE_INT
? ~(unsigned HOST_WIDE_INT) 0
: ((unsigned HOST_WIDE_INT) 1 << len) - 1,
- dest, 0);
+ 0);
/* If SRC is masked by an AND that does not make a difference in
the value being stored, strip it. */
break;
case SUBREG:
- /* Non-paradoxical SUBREGs distributes over all operations, provided
- the inner modes and byte offsets are the same, this is an extraction
- of a low-order part, we don't convert an fp operation to int or
- vice versa, and we would not be converting a single-word
- operation into a multi-word operation. The latter test is not
- required, but it prevents generating unneeded multi-word operations.
- Some of the previous tests are redundant given the latter test, but
- are retained because they are required for correctness.
+ /* Non-paradoxical SUBREGs distributes over all operations,
+ provided the inner modes and byte offsets are the same, this
+ is an extraction of a low-order part, we don't convert an fp
+ operation to int or vice versa, this is not a vector mode,
+ and we would not be converting a single-word operation into a
+ multi-word operation. The latter test is not required, but
+ it prevents generating unneeded multi-word operations. Some
+ of the previous tests are redundant given the latter test,
+ but are retained because they are required for correctness.
We produce the result slightly differently in this case. */
!= GET_MODE_CLASS (GET_MODE (SUBREG_REG (lhs))))
|| (GET_MODE_SIZE (GET_MODE (lhs))
> GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))))
- || GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))) > UNITS_PER_WORD)
+ || VECTOR_MODE_P (GET_MODE (lhs))
+ || GET_MODE_SIZE (GET_MODE (SUBREG_REG (lhs))) > UNITS_PER_WORD
+ /* Result might need to be truncated. Don't change mode if
+ explicit truncation is needed. */
+ || !TRULY_NOOP_TRUNCATION
+ (GET_MODE_BITSIZE (GET_MODE (x)),
+ GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (lhs)))))
return x;
tem = simplify_gen_binary (code, GET_MODE (SUBREG_REG (lhs)),
expanding a bit field assignment. When we apply the distributive
law to this, we get (ior (and (A (not B))) (and (B (not B)))),
which then simplifies to (and (A (not B))).
-
+
Note that no checks happen on the validity of applying the inverse
distributive law. This is pointless since we can do it in the
few places where this routine is called.
return NULL_RTX;
}
\f
-/* We have X, a logical `and' of VAROP with the constant CONSTOP, to be done
- in MODE.
-
- Return an equivalent form, if different from X. Otherwise, return X. If
- X is zero, we are to always construct the equivalent form. */
+/* Simplify a logical `and' of VAROP with the constant CONSTOP, to be done
+ in MODE. Return an equivalent form, if different from (and VAROP
+ (const_int CONSTOP)). Otherwise, return NULL_RTX. */
static rtx
-simplify_and_const_int (rtx x, enum machine_mode mode, rtx varop,
- unsigned HOST_WIDE_INT constop)
+simplify_and_const_int_1 (enum machine_mode mode, rtx varop,
+ unsigned HOST_WIDE_INT constop)
{
unsigned HOST_WIDE_INT nonzero;
+ unsigned HOST_WIDE_INT orig_constop;
+ rtx orig_varop;
int i;
+ orig_varop = varop;
+ orig_constop = constop;
+ if (GET_CODE (varop) == CLOBBER)
+ return NULL_RTX;
+
/* Simplify VAROP knowing that we will be only looking at some of the
bits in it.
CONSTOP are not significant and will never be examined. We must
ensure that is the case by explicitly masking out those bits
before returning. */
- varop = force_to_mode (varop, mode, constop, NULL_RTX, 0);
+ varop = force_to_mode (varop, mode, constop, 0);
/* If VAROP is a CLOBBER, we will fail so return it. */
if (GET_CODE (varop) == CLOBBER)
XEXP (varop, 1),
constop))));
- /* If VAROP is PLUS, and the constant is a mask of low bite, distribute
+ /* If VAROP is PLUS, and the constant is a mask of low bits, distribute
the AND and see if one of the operands simplifies to zero. If so, we
may eliminate it. */
return o0;
}
- /* Get VAROP in MODE. Try to get a SUBREG if not. Don't make a new SUBREG
- if we already had one (just check for the simplest cases). */
- if (x && GET_CODE (XEXP (x, 0)) == SUBREG
- && GET_MODE (XEXP (x, 0)) == mode
- && SUBREG_REG (XEXP (x, 0)) == varop)
- varop = XEXP (x, 0);
- else
- varop = gen_lowpart (mode, varop);
-
- /* If we can't make the SUBREG, try to return what we were given. */
- if (GET_CODE (varop) == CLOBBER)
- return x ? x : varop;
+ /* Make a SUBREG if necessary. If we can't make it, fail. */
+ varop = gen_lowpart (mode, varop);
+ if (varop == NULL_RTX || GET_CODE (varop) == CLOBBER)
+ return NULL_RTX;
/* If we are only masking insignificant bits, return VAROP. */
if (constop == nonzero)
- x = varop;
- else
- {
- /* Otherwise, return an AND. */
- constop = trunc_int_for_mode (constop, mode);
- /* See how much, if any, of X we can use. */
- if (x == 0 || GET_CODE (x) != AND || GET_MODE (x) != mode)
- x = simplify_gen_binary (AND, mode, varop, GEN_INT (constop));
+ return varop;
- else
- {
- if (GET_CODE (XEXP (x, 1)) != CONST_INT
- || (unsigned HOST_WIDE_INT) INTVAL (XEXP (x, 1)) != constop)
- SUBST (XEXP (x, 1), GEN_INT (constop));
+ if (varop == orig_varop && constop == orig_constop)
+ return NULL_RTX;
- SUBST (XEXP (x, 0), varop);
- }
- }
+ /* Otherwise, return an AND. */
+ return simplify_gen_binary (AND, mode, varop, gen_int_mode (constop, mode));
+}
+
+
+/* We have X, a logical `and' of VAROP with the constant CONSTOP, to be done
+ in MODE.
+
+ Return an equivalent form, if different from X. Otherwise, return X. If
+ X is zero, we are to always construct the equivalent form. */
+
+static rtx
+simplify_and_const_int (rtx x, enum machine_mode mode, rtx varop,
+ unsigned HOST_WIDE_INT constop)
+{
+ rtx tem = simplify_and_const_int_1 (mode, varop, constop);
+ if (tem)
+ return tem;
+ if (!x)
+ x = simplify_gen_binary (AND, GET_MODE (varop), varop,
+ gen_int_mode (constop, mode));
+ if (GET_MODE (x) != mode)
+ x = gen_lowpart (mode, x);
return x;
}
\f
if (reg_stat[REGNO (x)].last_set_value != 0
&& (reg_stat[REGNO (x)].last_set_mode == mode
- || (GET_MODE_CLASS (reg_stat[REGNO (x)].last_set_mode) == MODE_INT
+ || (GET_MODE_CLASS (reg_stat[REGNO (x)].last_set_mode) == MODE_INT
&& GET_MODE_CLASS (mode) == MODE_INT))
&& (reg_stat[REGNO (x)].last_set_label == label_tick
|| (REGNO (x) >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (REGNO (x)) == 1
&& ! REGNO_REG_SET_P
- (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
REGNO (x))))
&& INSN_CUID (reg_stat[REGNO (x)].last_set) < subst_low_cuid)
{
{
#ifdef SHORT_IMMEDIATES_SIGN_EXTEND
/* If X is narrower than MODE and TEM is a non-negative
- constant that would appear negative in the mode of X,
- sign-extend it for use in reg_nonzero_bits because some
- machines (maybe most) will actually do the sign-extension
- and this is the conservative approach.
+ constant that would appear negative in the mode of X,
+ sign-extend it for use in reg_nonzero_bits because some
+ machines (maybe most) will actually do the sign-extension
+ and this is the conservative approach.
- ??? For 2.5, try to tighten up the MD files in this regard
- instead of this kludge. */
+ ??? For 2.5, try to tighten up the MD files in this regard
+ instead of this kludge. */
if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode)
&& GET_CODE (tem) == CONST_INT
unsigned HOST_WIDE_INT mask = reg_stat[REGNO (x)].nonzero_bits;
if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode))
- /* We don't know anything about the upper bits. */
- mask |= GET_MODE_MASK (mode) ^ GET_MODE_MASK (GET_MODE (x));
+ /* We don't know anything about the upper bits. */
+ mask |= GET_MODE_MASK (mode) ^ GET_MODE_MASK (GET_MODE (x));
*nonzero &= mask;
}
if (reg_stat[REGNO (x)].last_set_value != 0
&& reg_stat[REGNO (x)].last_set_mode == mode
&& (reg_stat[REGNO (x)].last_set_label == label_tick
- || (REGNO (x) >= FIRST_PSEUDO_REGISTER
+ || (REGNO (x) >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (REGNO (x)) == 1
&& ! REGNO_REG_SET_P
- (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
+ (ENTRY_BLOCK_PTR->next_bb->il.rtl->global_live_at_start,
REGNO (x))))
&& INSN_CUID (reg_stat[REGNO (x)].last_set) < subst_low_cuid)
{
if (nonzero_sign_valid && reg_stat[REGNO (x)].sign_bit_copies != 0
&& GET_MODE_BITSIZE (GET_MODE (x)) == GET_MODE_BITSIZE (mode))
*result = reg_stat[REGNO (x)].sign_bit_copies;
-
+
return NULL;
}
\f
}
\f
/* Simplify a shift of VAROP by COUNT bits. CODE says what kind of shift.
- The result of the shift is RESULT_MODE. X, if nonzero, is an expression
- that we started with.
+ The result of the shift is RESULT_MODE. Return NULL_RTX if we cannot
+ simplify it. Otherwise, return a simplified value.
The shift is normally computed in the widest mode we find in VAROP, as
long as it isn't a different number of words than RESULT_MODE. Exceptions
- are ASHIFTRT and ROTATE, which are always done in their original mode, */
+ are ASHIFTRT and ROTATE, which are always done in their original mode. */
static rtx
-simplify_shift_const (rtx x, enum rtx_code code,
- enum machine_mode result_mode, rtx varop,
- int orig_count)
+simplify_shift_const_1 (enum rtx_code code, enum machine_mode result_mode,
+ rtx varop, int orig_count)
{
enum rtx_code orig_code = code;
- unsigned int count;
- int signed_count;
+ rtx orig_varop = varop;
+ int count;
enum machine_mode mode = result_mode;
enum machine_mode shift_mode, tmode;
unsigned int mode_words
/* We form (outer_op (code varop count) (outer_const)). */
enum rtx_code outer_op = UNKNOWN;
HOST_WIDE_INT outer_const = 0;
- rtx const_rtx;
int complement_p = 0;
- rtx new;
+ rtx new, x;
/* Make sure and truncate the "natural" shift on the way in. We don't
want to do this inside the loop as it makes it more difficult to
what was requested. */
if (orig_count < 0 || orig_count >= (int) GET_MODE_BITSIZE (mode))
- {
- if (x)
- return x;
-
- return gen_rtx_fmt_ee (code, mode, varop, GEN_INT (orig_count));
- }
+ return NULL_RTX;
count = orig_count;
while (count != 0)
{
- /* If we have an operand of (clobber (const_int 0)), just return that
- value. */
+ /* If we have an operand of (clobber (const_int 0)), fail. */
if (GET_CODE (varop) == CLOBBER)
- return varop;
+ return NULL_RTX;
/* If we discovered we had to complement VAROP, leave. Making a NOT
here would cause an infinite loop. */
multiple operations, each of which are defined, we know what the
result is supposed to be. */
- if (count > (unsigned int) (GET_MODE_BITSIZE (shift_mode) - 1))
+ if (count > (GET_MODE_BITSIZE (shift_mode) - 1))
{
if (code == ASHIFTRT)
count = GET_MODE_BITSIZE (shift_mode) - 1;
}
break;
- case USE:
- /* Similar to the case above, except that we can only do this if
- the resulting mode is the same as that of the underlying
- MEM and adjust the address depending on the *bits* endianness
- because of the way that bit-field extract insns are defined. */
- if ((code == ASHIFTRT || code == LSHIFTRT)
- && (tmode = mode_for_size (GET_MODE_BITSIZE (mode) - count,
- MODE_INT, 1)) != BLKmode
- && tmode == GET_MODE (XEXP (varop, 0)))
- {
- if (BITS_BIG_ENDIAN)
- new = XEXP (varop, 0);
- else
- {
- new = copy_rtx (XEXP (varop, 0));
- SUBST (XEXP (new, 0),
- plus_constant (XEXP (new, 0),
- count / BITS_PER_UNIT));
- }
-
- varop = gen_rtx_fmt_e (code == ASHIFTRT ? SIGN_EXTEND
- : ZERO_EXTEND, mode, new);
- count = 0;
- continue;
- }
- break;
-
case SUBREG:
/* If VAROP is a SUBREG, strip it as long as the inner operand has
the same number of words as what we've seen so far. Then store
interpreted as the sign bit in a narrower mode, so, if
the result is narrower, don't discard the shift. */
if (code == LSHIFTRT
- && count == (unsigned int) (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_BITSIZE (result_mode) - 1)
&& (GET_MODE_BITSIZE (result_mode)
>= GET_MODE_BITSIZE (GET_MODE (varop))))
{
&& INTVAL (XEXP (varop, 1)) >= 0
&& INTVAL (XEXP (varop, 1)) < GET_MODE_BITSIZE (GET_MODE (varop))
&& GET_MODE_BITSIZE (result_mode) <= HOST_BITS_PER_WIDE_INT
- && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
+ && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
+ && !VECTOR_MODE_P (result_mode))
{
enum rtx_code first_code = GET_CODE (varop);
unsigned int first_count = INTVAL (XEXP (varop, 1));
(ashiftrt:M1 (ashift:M1 (and:M1 (subreg:M1 FOO 0 C2) C3) C1).
This simplifies certain SIGN_EXTEND operations. */
if (code == ASHIFT && first_code == ASHIFTRT
- && count == (unsigned int)
- (GET_MODE_BITSIZE (result_mode)
+ && count == (GET_MODE_BITSIZE (result_mode)
- GET_MODE_BITSIZE (GET_MODE (varop))))
{
/* C3 has the low-order C1 bits zero. */
> first_count))
{
varop = XEXP (varop, 0);
-
- signed_count = count - first_count;
- if (signed_count < 0)
- count = -signed_count, code = ASHIFT;
- else
- count = signed_count;
+ count -= first_count;
+ if (count < 0)
+ {
+ count = -count;
+ code = ASHIFT;
+ }
continue;
}
mask_rtx = GEN_INT (nonzero_bits (varop, GET_MODE (varop)));
mask_rtx
- = simplify_binary_operation (code, result_mode, mask_rtx,
- GEN_INT (count));
+ = simplify_const_binary_operation (code, result_mode, mask_rtx,
+ GEN_INT (count));
/* Give up if we can't compute an outer operation to use. */
if (mask_rtx == 0
/* If the shifts are in the same direction, we add the
counts. Otherwise, we subtract them. */
- signed_count = count;
if ((code == ASHIFTRT || code == LSHIFTRT)
== (first_code == ASHIFTRT || first_code == LSHIFTRT))
- signed_count += first_count;
+ count += first_count;
else
- signed_count -= first_count;
+ count -= first_count;
/* If COUNT is positive, the new shift is usually CODE,
except for the two exceptions below, in which case it is
FIRST_CODE. If the count is negative, FIRST_CODE should
always be used */
- if (signed_count > 0
+ if (count > 0
&& ((first_code == ROTATE && code == ASHIFT)
|| (first_code == ASHIFTRT && code == LSHIFTRT)))
- code = first_code, count = signed_count;
- else if (signed_count < 0)
- code = first_code, count = -signed_count;
- else
- count = signed_count;
+ code = first_code;
+ else if (count < 0)
+ code = first_code, count = -count;
varop = XEXP (varop, 0);
continue;
B is not a constant. */
else if (GET_CODE (varop) == code
- && GET_CODE (XEXP (varop, 1)) != CONST_INT
- && 0 != (new
- = simplify_binary_operation (code, mode,
- XEXP (varop, 0),
- GEN_INT (count))))
+ && GET_CODE (XEXP (varop, 0)) == CONST_INT
+ && GET_CODE (XEXP (varop, 1)) != CONST_INT)
{
+ rtx new = simplify_const_binary_operation (code, mode,
+ XEXP (varop, 0),
+ GEN_INT (count));
varop = gen_rtx_fmt_ee (code, mode, new, XEXP (varop, 1));
count = 0;
continue;
&& XEXP (XEXP (varop, 0), 1) == constm1_rtx
&& (STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
&& (code == LSHIFTRT || code == ASHIFTRT)
- && count == (unsigned int)
- (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
+ && count == (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
&& rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
{
count = 0;
&& !(code == ASHIFTRT && GET_CODE (varop) == XOR
&& 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
shift_mode))
- && (new = simplify_binary_operation (code, result_mode,
- XEXP (varop, 1),
- GEN_INT (count))) != 0
+ && (new = simplify_const_binary_operation (code, result_mode,
+ XEXP (varop, 1),
+ GEN_INT (count))) != 0
&& GET_CODE (new) == CONST_INT
&& merge_outer_ops (&outer_op, &outer_const, GET_CODE (varop),
INTVAL (new), result_mode, &complement_p))
for some (ashiftrt (xor)). */
if (GET_CODE (XEXP (varop, 1)) == CONST_INT
&& !(code == ASHIFTRT && GET_CODE (varop) == XOR
- && 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
+ && 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
shift_mode)))
{
rtx lhs = simplify_shift_const (NULL_RTX, code, shift_mode,
varop = apply_distributive_law (varop);
count = 0;
- continue;
+ continue;
}
break;
if (code == LSHIFTRT
&& XEXP (varop, 1) == const0_rtx
&& GET_MODE (XEXP (varop, 0)) == result_mode
- && count == (unsigned int) (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_BITSIZE (result_mode) - 1)
&& GET_MODE_BITSIZE (result_mode) <= HOST_BITS_PER_WIDE_INT
- && ((STORE_FLAG_VALUE
- & ((HOST_WIDE_INT) 1
- < (GET_MODE_BITSIZE (result_mode) - 1))))
+ && STORE_FLAG_VALUE == -1
&& nonzero_bits (XEXP (varop, 0), result_mode) == 1
&& merge_outer_ops (&outer_op, &outer_const, XOR,
(HOST_WIDE_INT) 1, result_mode,
/* (lshiftrt (neg A) C) where A is either 0 or 1 and C is one less
than the number of bits in the mode is equivalent to A. */
if (code == LSHIFTRT
- && count == (unsigned int) (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_BITSIZE (result_mode) - 1)
&& nonzero_bits (XEXP (varop, 0), result_mode) == 1)
{
varop = XEXP (varop, 0);
is one less than the number of bits in the mode is
equivalent to (xor A 1). */
if (code == LSHIFTRT
- && count == (unsigned int) (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_BITSIZE (result_mode) - 1)
&& XEXP (varop, 1) == constm1_rtx
&& nonzero_bits (XEXP (varop, 0), result_mode) == 1
&& merge_outer_ops (&outer_op, &outer_const, XOR,
/* (ashift (plus foo C) N) is (plus (ashift foo N) C'). */
if (code == ASHIFT
&& GET_CODE (XEXP (varop, 1)) == CONST_INT
- && (new = simplify_binary_operation (ASHIFT, result_mode,
- XEXP (varop, 1),
- GEN_INT (count))) != 0
+ && (new = simplify_const_binary_operation (ASHIFT, result_mode,
+ XEXP (varop, 1),
+ GEN_INT (count))) != 0
&& GET_CODE (new) == CONST_INT
&& merge_outer_ops (&outer_op, &outer_const, PLUS,
INTVAL (new), result_mode, &complement_p))
if (code == LSHIFTRT
&& GET_CODE (XEXP (varop, 1)) == CONST_INT
&& mode_signbit_p (result_mode, XEXP (varop, 1))
- && (new = simplify_binary_operation (code, result_mode,
- XEXP (varop, 1),
- GEN_INT (count))) != 0
+ && (new = simplify_const_binary_operation (code, result_mode,
+ XEXP (varop, 1),
+ GEN_INT (count))) != 0
&& GET_CODE (new) == CONST_INT
&& merge_outer_ops (&outer_op, &outer_const, XOR,
INTVAL (new), result_mode, &complement_p))
if ((STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
&& GET_CODE (XEXP (varop, 0)) == ASHIFTRT
- && count == (unsigned int)
- (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
+ && count == (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
&& (code == LSHIFTRT || code == ASHIFTRT)
&& GET_CODE (XEXP (XEXP (varop, 0), 1)) == CONST_INT
- && (unsigned HOST_WIDE_INT) INTVAL (XEXP (XEXP (varop, 0), 1))
- == count
+ && INTVAL (XEXP (XEXP (varop, 0), 1)) == count
&& rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
{
count = 0;
a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
OUTER_OP is non-UNKNOWN, it is an operation that needs to be applied
to the result of the shift. OUTER_CONST is the relevant constant,
- but we must turn off all bits turned off in the shift.
-
- If we were passed a value for X, see if we can use any pieces of
- it. If not, make new rtx. */
+ but we must turn off all bits turned off in the shift. */
- if (x && GET_RTX_CLASS (GET_CODE (x)) == RTX_BIN_ARITH
- && GET_CODE (XEXP (x, 1)) == CONST_INT
- && (unsigned HOST_WIDE_INT) INTVAL (XEXP (x, 1)) == count)
- const_rtx = XEXP (x, 1);
- else
- const_rtx = GEN_INT (count);
-
- if (x && GET_CODE (XEXP (x, 0)) == SUBREG
- && GET_MODE (XEXP (x, 0)) == shift_mode
- && SUBREG_REG (XEXP (x, 0)) == varop)
- varop = XEXP (x, 0);
- else if (GET_MODE (varop) != shift_mode)
- varop = gen_lowpart (shift_mode, varop);
-
- /* If we can't make the SUBREG, try to return what we were given. */
- if (GET_CODE (varop) == CLOBBER)
- return x ? x : varop;
+ if (outer_op == UNKNOWN
+ && orig_code == code && orig_count == count
+ && varop == orig_varop
+ && shift_mode == GET_MODE (varop))
+ return NULL_RTX;
- new = simplify_binary_operation (code, shift_mode, varop, const_rtx);
- if (new != 0)
- x = new;
- else
- x = gen_rtx_fmt_ee (code, shift_mode, varop, const_rtx);
+ /* Make a SUBREG if necessary. If we can't make it, fail. */
+ varop = gen_lowpart (shift_mode, varop);
+ if (varop == NULL_RTX || GET_CODE (varop) == CLOBBER)
+ return NULL_RTX;
/* If we have an outer operation and we just made a shift, it is
possible that we could have simplified the shift were it not
for the outer operation. So try to do the simplification
recursively. */
- if (outer_op != UNKNOWN && GET_CODE (x) == code
- && GET_CODE (XEXP (x, 1)) == CONST_INT)
- x = simplify_shift_const (x, code, shift_mode, XEXP (x, 0),
- INTVAL (XEXP (x, 1)));
+ if (outer_op != UNKNOWN)
+ x = simplify_shift_const_1 (code, shift_mode, varop, count);
+ else
+ x = NULL_RTX;
+
+ if (x == NULL_RTX)
+ x = simplify_gen_binary (code, shift_mode, varop, GEN_INT (count));
/* If we were doing an LSHIFTRT in a wider mode than it was originally,
turn off all the bits that the shift would have turned off. */
GET_MODE_MASK (result_mode) >> orig_count);
/* Do the remainder of the processing in RESULT_MODE. */
- x = gen_lowpart (result_mode, x);
+ x = gen_lowpart_or_truncate (result_mode, x);
/* If COMPLEMENT_P is set, we have to complement X before doing the outer
operation. */
return x;
}
+
+/* Simplify a shift of VAROP by COUNT bits. CODE says what kind of shift.
+ The result of the shift is RESULT_MODE. If we cannot simplify it,
+ return X or, if it is NULL, synthesize the expression with
+ simplify_gen_binary. Otherwise, return a simplified value.
+
+ The shift is normally computed in the widest mode we find in VAROP, as
+ long as it isn't a different number of words than RESULT_MODE. Exceptions
+ are ASHIFTRT and ROTATE, which are always done in their original mode. */
+
+static rtx
+simplify_shift_const (rtx x, enum rtx_code code, enum machine_mode result_mode,
+ rtx varop, int count)
+{
+ rtx tem = simplify_shift_const_1 (code, result_mode, varop, count);
+ if (tem)
+ return tem;
+
+ if (!x)
+ x = simplify_gen_binary (code, GET_MODE (varop), varop, GEN_INT (count));
+ if (GET_MODE (x) != result_mode)
+ x = gen_lowpart (result_mode, x);
+ return x;
+}
+
\f
/* Like recog, but we receive the address of a pointer to a new pattern.
We try to match the rtx that the pointer points to.
op0 = force_to_mode (op0, mode,
((HOST_WIDE_INT) 1
<< (GET_MODE_BITSIZE (mode) - 1)),
- NULL_RTX, 0);
+ 0);
/* Now try cases based on the opcode of OP0. If none of the cases
does a "continue", we exit this loop immediately after the
&& ! unsigned_comparison_p
&& (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
&& ((unsigned HOST_WIDE_INT) const_op
- < (((unsigned HOST_WIDE_INT) 1
+ < (((unsigned HOST_WIDE_INT) 1
<< (GET_MODE_BITSIZE (mode) - 1))))
&& cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
{
HOST_WIDE_INT c1 = -INTVAL (XEXP (SUBREG_REG (op0), 1));
if ((c1 > 0
- && (unsigned HOST_WIDE_INT) c1
+ && (unsigned HOST_WIDE_INT) c1
< (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)
&& (equality_comparison_p || unsigned_comparison_p)
/* (A - C1) zero-extends if it is positive and sign-extends
{
op0 = SUBREG_REG (op0);
continue;
- }
+ }
}
/* If the inner mode is narrower and we are extracting the low part,
case UNEQ: case LTGT:
case LT: case LTU: case UNLT: case LE: case LEU: case UNLE:
case GT: case GTU: case UNGT: case GE: case GEU: case UNGE:
- case UNORDERED: case ORDERED:
+ case UNORDERED: case ORDERED:
/* We can't do anything if OP0 is a condition code value, rather
than an actual data value. */
if (const_op != 0
&& XEXP (XEXP (op0, 0), 0) == const1_rtx)
{
op0 = simplify_and_const_int
- (op0, mode, gen_rtx_LSHIFTRT (mode,
- XEXP (op0, 1),
- XEXP (XEXP (op0, 0), 1)),
+ (NULL_RTX, mode, gen_rtx_LSHIFTRT (mode,
+ XEXP (op0, 1),
+ XEXP (XEXP (op0, 0), 1)),
(HOST_WIDE_INT) 1);
continue;
}
/* If this AND operation is really a ZERO_EXTEND from a narrower
mode, the constant fits within that mode, and this is either an
equality or unsigned comparison, try to do this comparison in
- the narrower mode. */
+ the narrower mode.
+
+ Note that in:
+
+ (ne:DI (and:DI (reg:DI 4) (const_int 0xffffffff)) (const_int 0))
+ -> (ne:DI (reg:SI 4) (const_int 0))
+
+ unless TRULY_NOOP_TRUNCATION allows it or the register is
+ known to hold a value of the required mode the
+ transformation is invalid. */
if ((equality_comparison_p || unsigned_comparison_p)
&& GET_CODE (XEXP (op0, 1)) == CONST_INT
&& (i = exact_log2 ((INTVAL (XEXP (op0, 1))
& GET_MODE_MASK (mode))
+ 1)) >= 0
&& const_op >> i == 0
- && (tmode = mode_for_size (i, MODE_INT, 1)) != BLKmode)
+ && (tmode = mode_for_size (i, MODE_INT, 1)) != BLKmode
+ && (TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (tmode),
+ GET_MODE_BITSIZE (GET_MODE (op0)))
+ || (REG_P (XEXP (op0, 0))
+ && reg_truncated_to_mode (tmode, XEXP (op0, 0)))))
{
op0 = gen_lowpart (tmode, XEXP (op0, 0));
continue;
{
/* For paradoxical subregs, allow case 1 as above. Case 3 isn't
implemented. */
- if (REG_P (SUBREG_REG (op0)))
+ if (REG_P (SUBREG_REG (op0)))
{
op0 = SUBREG_REG (op0);
op1 = gen_lowpart (GET_MODE (op0), op1);
reg_stat[i].last_set_nonzero_bits = 0;
reg_stat[i].last_set_sign_bit_copies = 0;
reg_stat[i].last_death = 0;
+ reg_stat[i].truncated_to_mode = 0;
}
/* Mark registers that are being referenced in this value. */
for (i = regno; i < endregno; i++)
{
reg_stat[i].last_set_label = label_tick;
- if (value && reg_stat[i].last_set_table_tick == label_tick)
+ if (!insn || (value && reg_stat[i].last_set_table_tick == label_tick))
reg_stat[i].last_set_invalid = 1;
else
reg_stat[i].last_set_invalid = 0;
if (GET_CODE (dest) == SUBREG)
dest = SUBREG_REG (dest);
+ if (!record_dead_insn)
+ {
+ if (REG_P (dest))
+ record_value_for_reg (dest, NULL_RTX, NULL_RTX);
+ return;
+ }
+
if (REG_P (dest))
{
/* If we are setting the whole register, we know its value. Otherwise
reg_stat[i].last_set_nonzero_bits = 0;
reg_stat[i].last_set_sign_bit_copies = 0;
reg_stat[i].last_death = 0;
+ reg_stat[i].truncated_to_mode = 0;
}
last_call_cuid = mem_last_set = INSN_CUID (insn);
- /* Don't bother recording what this insn does. It might set the
- return value register, but we can't combine into a call
- pattern anyway, so there's no point trying (and it may cause
- a crash, if e.g. we wind up asking for last_set_value of a
- SUBREG of the return value register). */
- return;
+ /* We can't combine into a call pattern. Remember, though, that
+ the return value register is set at this CUID. We could
+ still replace a register with the return value from the
+ wrong subroutine call! */
+ note_stores (PATTERN (insn), record_dead_and_set_regs_1, NULL_RTX);
}
-
- note_stores (PATTERN (insn), record_dead_and_set_regs_1, insn);
+ else
+ note_stores (PATTERN (insn), record_dead_and_set_regs_1, insn);
}
/* If a SUBREG has the promoted bit set, it is in fact a property of the
}
}
-/* Scan X for promoted SUBREGs. For each one found,
- note what it implies to the registers used in it. */
+/* Check if X, a register, is known to contain a value already
+ truncated to MODE. In this case we can use a subreg to refer to
+ the truncated value even though in the generic case we would need
+ an explicit truncation. */
+
+static bool
+reg_truncated_to_mode (enum machine_mode mode, rtx x)
+{
+ enum machine_mode truncated = reg_stat[REGNO (x)].truncated_to_mode;
+
+ if (truncated == 0 || reg_stat[REGNO (x)].truncation_label != label_tick)
+ return false;
+ if (GET_MODE_SIZE (truncated) <= GET_MODE_SIZE (mode))
+ return true;
+ if (TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
+ GET_MODE_BITSIZE (truncated)))
+ return true;
+ return false;
+}
+
+/* X is a REG or a SUBREG. If X is some sort of a truncation record
+ it. For non-TRULY_NOOP_TRUNCATION targets we might be able to turn
+ a truncate into a subreg using this information. */
+
+static void
+record_truncated_value (rtx x)
+{
+ enum machine_mode truncated_mode;
+
+ if (GET_CODE (x) == SUBREG && REG_P (SUBREG_REG (x)))
+ {
+ enum machine_mode original_mode = GET_MODE (SUBREG_REG (x));
+ truncated_mode = GET_MODE (x);
+
+ if (GET_MODE_SIZE (original_mode) <= GET_MODE_SIZE (truncated_mode))
+ return;
+
+ if (TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (truncated_mode),
+ GET_MODE_BITSIZE (original_mode)))
+ return;
+
+ x = SUBREG_REG (x);
+ }
+ /* ??? For hard-regs we now record everything. We might be able to
+ optimize this using last_set_mode. */
+ else if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
+ truncated_mode = GET_MODE (x);
+ else
+ return;
+
+ if (reg_stat[REGNO (x)].truncated_to_mode == 0
+ || reg_stat[REGNO (x)].truncation_label < label_tick
+ || (GET_MODE_SIZE (truncated_mode)
+ < GET_MODE_SIZE (reg_stat[REGNO (x)].truncated_to_mode)))
+ {
+ reg_stat[REGNO (x)].truncated_to_mode = truncated_mode;
+ reg_stat[REGNO (x)].truncation_label = label_tick;
+ }
+}
+
+/* Scan X for promoted SUBREGs and truncated REGs. For each one
+ found, note what it implies to the registers used in it. */
static void
-check_promoted_subreg (rtx insn, rtx x)
+check_conversions (rtx insn, rtx x)
{
- if (GET_CODE (x) == SUBREG && SUBREG_PROMOTED_VAR_P (x)
- && REG_P (SUBREG_REG (x)))
- record_promoted_value (insn, x);
+ if (GET_CODE (x) == SUBREG || REG_P (x))
+ {
+ if (GET_CODE (x) == SUBREG
+ && SUBREG_PROMOTED_VAR_P (x)
+ && REG_P (SUBREG_REG (x)))
+ record_promoted_value (insn, x);
+
+ record_truncated_value (x);
+ }
else
{
const char *format = GET_RTX_FORMAT (GET_CODE (x));
switch (format[i])
{
case 'e':
- check_promoted_subreg (insn, XEXP (x, i));
+ check_conversions (insn, XEXP (x, i));
break;
case 'V':
case 'E':
if (XVEC (x, i) != 0)
for (j = 0; j < XVECLEN (x, i); j++)
- check_promoted_subreg (insn, XVECEXP (x, i, j));
+ check_conversions (insn, XVECEXP (x, i, j));
break;
}
}
{
rtx place = 0, place2 = 0;
- /* If this NOTE references a pseudo register, ensure it references
- the latest copy of that register. */
- if (XEXP (note, 0) && REG_P (XEXP (note, 0))
- && REGNO (XEXP (note, 0)) >= FIRST_PSEUDO_REGISTER)
- XEXP (note, 0) = regno_reg_rtx[REGNO (XEXP (note, 0))];
-
next_note = XEXP (note, 1);
switch (REG_NOTE_KIND (note))
{
if (place && JUMP_P (place))
{
rtx label = JUMP_LABEL (place);
-
+
if (!label)
JUMP_LABEL (place) = XEXP (note, 0);
else
if (place2 && JUMP_P (place2))
{
rtx label = JUMP_LABEL (place2);
-
+
if (!label)
JUMP_LABEL (place2) = XEXP (note, 0);
else
break;
case REG_DEAD:
- /* If the register is used as an input in I3, it dies there.
+ /* If we replaced the right hand side of FROM_INSN with a
+ REG_EQUAL note, the original use of the dying register
+ will not have been combined into I3 and I2. In such cases,
+ FROM_INSN is guaranteed to be the first of the combined
+ instructions, so we simply need to search back before
+ FROM_INSN for the previous use or set of this register,
+ then alter the notes there appropriately.
+
+ If the register is used as an input in I3, it dies there.
Similarly for I2, if it is nonzero and adjacent to I3.
If the register is not used as an input in either I3 or I2
use of A and put the death note there. */
if (from_insn
- && CALL_P (from_insn)
- && find_reg_fusage (from_insn, USE, XEXP (note, 0)))
- place = from_insn;
- else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
- place = i3;
- else if (i2 != 0 && next_nonnote_insn (i2) == i3
- && reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
- place = i2;
-
- if (place == 0
- && (rtx_equal_p (XEXP (note, 0), elim_i2)
- || rtx_equal_p (XEXP (note, 0), elim_i1)))
- break;
+ && from_insn == replaced_rhs_insn
+ && !reg_overlap_mentioned_p (XEXP (note, 0), replaced_rhs_value))
+ tem = from_insn;
+ else
+ {
+ if (from_insn
+ && CALL_P (from_insn)
+ && find_reg_fusage (from_insn, USE, XEXP (note, 0)))
+ place = from_insn;
+ else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
+ place = i3;
+ else if (i2 != 0 && next_nonnote_insn (i2) == i3
+ && reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
+ place = i2;
+ else if (rtx_equal_p (XEXP (note, 0), elim_i2)
+ || rtx_equal_p (XEXP (note, 0), elim_i1))
+ break;
+ tem = i3;
+ }
if (place == 0)
{
basic_block bb = this_basic_block;
- for (tem = PREV_INSN (i3); place == 0; tem = PREV_INSN (tem))
+ for (tem = PREV_INSN (tem); place == 0; tem = PREV_INSN (tem))
{
if (! INSN_P (tem))
{
}
/* Try combining insns through substitution. */
-static void
+static unsigned int
rest_of_handle_combine (void)
{
int rebuild_jump_labels_after_combine
delete_dead_jumptables ();
cleanup_cfg (CLEANUP_EXPENSIVE | CLEANUP_UPDATE_LIFE);
}
+ return 0;
}
struct tree_opt_pass pass_combine =