offset = INTVAL (XEXP (dest, 2));
dest = XEXP (dest, 0);
if (BITS_BIG_ENDIAN)
- offset = GET_MODE_BITSIZE (GET_MODE (dest)) - width - offset;
+ offset = GET_MODE_PRECISION (GET_MODE (dest)) - width - offset;
}
}
else
{
if (GET_CODE (dest) == STRICT_LOW_PART)
dest = XEXP (dest, 0);
- width = GET_MODE_BITSIZE (GET_MODE (dest));
+ width = GET_MODE_PRECISION (GET_MODE (dest));
offset = 0;
}
if (subreg_lowpart_p (dest))
;
/* Handle the case where inner is twice the size of outer. */
- else if (GET_MODE_BITSIZE (GET_MODE (SET_DEST (temp)))
- == 2 * GET_MODE_BITSIZE (GET_MODE (dest)))
- offset += GET_MODE_BITSIZE (GET_MODE (dest));
+ else if (GET_MODE_PRECISION (GET_MODE (SET_DEST (temp)))
+ == 2 * GET_MODE_PRECISION (GET_MODE (dest)))
+ offset += GET_MODE_PRECISION (GET_MODE (dest));
/* Otherwise give up for now. */
else
offset = -1;
}
if (offset >= 0
- && (GET_MODE_BITSIZE (GET_MODE (SET_DEST (temp)))
+ && (GET_MODE_PRECISION (GET_MODE (SET_DEST (temp)))
<= HOST_BITS_PER_DOUBLE_INT))
{
double_int m, o, i;
(REG_P (temp)
&& VEC_index (reg_stat_type, reg_stat,
REGNO (temp))->nonzero_bits != 0
- && GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
- && GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
+ && GET_MODE_PRECISION (GET_MODE (temp)) < BITS_PER_WORD
+ && GET_MODE_PRECISION (GET_MODE (temp)) < HOST_BITS_PER_INT
&& (VEC_index (reg_stat_type, reg_stat,
REGNO (temp))->nonzero_bits
!= GET_MODE_MASK (word_mode))))
(REG_P (temp)
&& VEC_index (reg_stat_type, reg_stat,
REGNO (temp))->nonzero_bits != 0
- && GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
- && GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
+ && GET_MODE_PRECISION (GET_MODE (temp)) < BITS_PER_WORD
+ && GET_MODE_PRECISION (GET_MODE (temp)) < HOST_BITS_PER_INT
&& (VEC_index (reg_stat_type, reg_stat,
REGNO (temp))->nonzero_bits
!= GET_MODE_MASK (word_mode)))))
&& CONST_INT_P (SET_SRC (x))
&& ((INTVAL (XEXP (SET_DEST (x), 1))
+ INTVAL (XEXP (SET_DEST (x), 2)))
- <= GET_MODE_BITSIZE (GET_MODE (XEXP (SET_DEST (x), 0))))
+ <= GET_MODE_PRECISION (GET_MODE (XEXP (SET_DEST (x), 0))))
&& ! side_effects_p (XEXP (SET_DEST (x), 0)))
{
HOST_WIDE_INT pos = INTVAL (XEXP (SET_DEST (x), 2));
rtx or_mask;
if (BITS_BIG_ENDIAN)
- pos = GET_MODE_BITSIZE (mode) - len - pos;
+ pos = GET_MODE_PRECISION (mode) - len - pos;
or_mask = gen_int_mode (src << pos, mode);
if (src == mask)
break;
pos = 0;
- len = GET_MODE_BITSIZE (GET_MODE (inner));
+ len = GET_MODE_PRECISION (GET_MODE (inner));
unsignedp = 0;
break;
pos = INTVAL (XEXP (SET_SRC (x), 2));
if (BITS_BIG_ENDIAN)
- pos = GET_MODE_BITSIZE (GET_MODE (inner)) - len - pos;
+ pos = GET_MODE_PRECISION (GET_MODE (inner)) - len - pos;
unsignedp = (code == ZERO_EXTRACT);
}
break;
break;
}
- if (len && pos >= 0 && pos + len <= GET_MODE_BITSIZE (GET_MODE (inner)))
+ if (len && pos >= 0
+ && pos + len <= GET_MODE_PRECISION (GET_MODE (inner)))
{
enum machine_mode mode = GET_MODE (SET_SRC (x));
(unsignedp ? LSHIFTRT : ASHIFTRT, mode,
gen_rtx_ASHIFT (mode,
gen_lowpart (mode, inner),
- GEN_INT (GET_MODE_BITSIZE (mode)
+ GEN_INT (GET_MODE_PRECISION (mode)
- len - pos)),
- GEN_INT (GET_MODE_BITSIZE (mode) - len)));
+ GEN_INT (GET_MODE_PRECISION (mode) - len)));
split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
if (GET_CODE (temp) == ASHIFTRT
&& CONST_INT_P (XEXP (temp, 1))
- && INTVAL (XEXP (temp, 1)) == GET_MODE_BITSIZE (mode) - 1)
+ && INTVAL (XEXP (temp, 1)) == GET_MODE_PRECISION (mode) - 1)
return simplify_shift_const (NULL_RTX, LSHIFTRT, mode, XEXP (temp, 0),
INTVAL (XEXP (temp, 1)));
rtx temp1 = simplify_shift_const
(NULL_RTX, ASHIFTRT, mode,
simplify_shift_const (NULL_RTX, ASHIFT, mode, temp,
- GET_MODE_BITSIZE (mode) - 1 - i),
- GET_MODE_BITSIZE (mode) - 1 - i);
+ GET_MODE_PRECISION (mode) - 1 - i),
+ GET_MODE_PRECISION (mode) - 1 - i);
/* If all we did was surround TEMP with the two shifts, we
haven't improved anything, so don't use it. Otherwise,
&& (UINTVAL (XEXP (XEXP (XEXP (x, 0), 0), 1))
== ((unsigned HOST_WIDE_INT) 1 << (i + 1)) - 1))
|| (GET_CODE (XEXP (XEXP (x, 0), 0)) == ZERO_EXTEND
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (XEXP (XEXP (x, 0), 0), 0)))
+ && (GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (XEXP (x, 0), 0), 0)))
== (unsigned int) i + 1))))
return simplify_shift_const
(NULL_RTX, ASHIFTRT, mode,
simplify_shift_const (NULL_RTX, ASHIFT, mode,
XEXP (XEXP (XEXP (x, 0), 0), 0),
- GET_MODE_BITSIZE (mode) - (i + 1)),
- GET_MODE_BITSIZE (mode) - (i + 1));
+ GET_MODE_PRECISION (mode) - (i + 1)),
+ GET_MODE_PRECISION (mode) - (i + 1));
/* If only the low-order bit of X is possibly nonzero, (plus x -1)
can become (ashiftrt (ashift (xor x 1) C) C) where C is
return simplify_shift_const (NULL_RTX, ASHIFTRT, mode,
simplify_shift_const (NULL_RTX, ASHIFT, mode,
gen_rtx_XOR (mode, XEXP (x, 0), const1_rtx),
- GET_MODE_BITSIZE (mode) - 1),
- GET_MODE_BITSIZE (mode) - 1);
+ GET_MODE_PRECISION (mode) - 1),
+ GET_MODE_PRECISION (mode) - 1);
/* If we are adding two things that have no bits in common, convert
the addition into an IOR. This will often be further simplified,
&& op1 == const0_rtx
&& mode == GET_MODE (op0)
&& (num_sign_bit_copies (op0, mode)
- == GET_MODE_BITSIZE (mode)))
+ == GET_MODE_PRECISION (mode)))
{
op0 = expand_compound_operation (op0);
return simplify_gen_unary (NEG, mode,
&& op1 == const0_rtx
&& mode == GET_MODE (op0)
&& (num_sign_bit_copies (op0, mode)
- == GET_MODE_BITSIZE (mode)))
+ == GET_MODE_PRECISION (mode)))
{
op0 = expand_compound_operation (op0);
return plus_constant (gen_lowpart (mode, op0), 1);
&& new_code == NE && GET_MODE_CLASS (mode) == MODE_INT
&& op1 == const0_rtx
&& (num_sign_bit_copies (op0, mode)
- == GET_MODE_BITSIZE (mode)))
+ == GET_MODE_PRECISION (mode)))
return gen_lowpart (mode,
expand_compound_operation (op0));
&& op1 == const0_rtx
&& mode == GET_MODE (op0)
&& (num_sign_bit_copies (op0, mode)
- == GET_MODE_BITSIZE (mode)))
+ == GET_MODE_PRECISION (mode)))
{
op0 = expand_compound_operation (op0);
return simplify_gen_unary (NOT, mode,
{
x = simplify_shift_const (NULL_RTX, ASHIFT, mode,
expand_compound_operation (op0),
- GET_MODE_BITSIZE (mode) - 1 - i);
+ GET_MODE_PRECISION (mode) - 1 - i);
if (GET_CODE (x) == AND && XEXP (x, 1) == const_true_rtx)
return XEXP (x, 0);
else
else if (SHIFT_COUNT_TRUNCATED && !REG_P (XEXP (x, 1)))
SUBST (XEXP (x, 1),
force_to_mode (XEXP (x, 1), GET_MODE (XEXP (x, 1)),
- targetm.shift_truncation_mask (GET_MODE (x)),
+ ((unsigned HOST_WIDE_INT) 1
+ << exact_log2 (GET_MODE_BITSIZE (GET_MODE (x))))
+ - 1,
0));
break;
}
else if (true_code == EQ && true_val == const0_rtx
&& (num_sign_bit_copies (from, GET_MODE (from))
- == GET_MODE_BITSIZE (GET_MODE (from))))
+ == GET_MODE_PRECISION (GET_MODE (from))))
{
false_code = EQ;
false_val = constm1_rtx;
&& rtx_equal_p (SUBREG_REG (XEXP (XEXP (t, 0), 0)), f)
&& (num_sign_bit_copies (f, GET_MODE (f))
> (unsigned int)
- (GET_MODE_BITSIZE (mode)
- - GET_MODE_BITSIZE (GET_MODE (XEXP (XEXP (t, 0), 0))))))
+ (GET_MODE_PRECISION (mode)
+ - GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (t, 0), 0))))))
{
c1 = XEXP (XEXP (t, 0), 1); z = f; op = GET_CODE (XEXP (t, 0));
extend_op = SIGN_EXTEND;
&& rtx_equal_p (SUBREG_REG (XEXP (XEXP (t, 0), 1)), f)
&& (num_sign_bit_copies (f, GET_MODE (f))
> (unsigned int)
- (GET_MODE_BITSIZE (mode)
- - GET_MODE_BITSIZE (GET_MODE (XEXP (XEXP (t, 0), 1))))))
+ (GET_MODE_PRECISION (mode)
+ - GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (t, 0), 1))))))
{
c1 = XEXP (XEXP (t, 0), 0); z = f; op = GET_CODE (XEXP (t, 0));
extend_op = SIGN_EXTEND;
&& ((1 == nonzero_bits (XEXP (cond, 0), mode)
&& (i = exact_log2 (UINTVAL (true_rtx))) >= 0)
|| ((num_sign_bit_copies (XEXP (cond, 0), mode)
- == GET_MODE_BITSIZE (mode))
+ == GET_MODE_PRECISION (mode))
&& (i = exact_log2 (-UINTVAL (true_rtx))) >= 0)))
return
simplify_shift_const (NULL_RTX, ASHIFT, mode,
rtx *cc_use;
/* (set (pc) (return)) gets written as (return). */
- if (GET_CODE (dest) == PC && GET_CODE (src) == RETURN)
+ if (GET_CODE (dest) == PC && ANY_RETURN_P (src))
return src;
/* Now that we know for sure which bits of SRC we are using, see if we can
if (dest == cc0_rtx
&& GET_CODE (src) == SUBREG
&& subreg_lowpart_p (src)
- && (GET_MODE_BITSIZE (GET_MODE (src))
- < GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (src)))))
+ && (GET_MODE_PRECISION (GET_MODE (src))
+ < GET_MODE_PRECISION (GET_MODE (SUBREG_REG (src)))))
{
rtx inner = SUBREG_REG (src);
enum machine_mode inner_mode = GET_MODE (inner);
#endif
&& (num_sign_bit_copies (XEXP (XEXP (src, 0), 0),
GET_MODE (XEXP (XEXP (src, 0), 0)))
- == GET_MODE_BITSIZE (GET_MODE (XEXP (XEXP (src, 0), 0))))
+ == GET_MODE_PRECISION (GET_MODE (XEXP (XEXP (src, 0), 0))))
&& ! side_effects_p (src))
{
rtx true_rtx = (GET_CODE (XEXP (src, 0)) == NE
if (! SCALAR_INT_MODE_P (GET_MODE (XEXP (x, 0))))
return x;
- len = GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)));
+ len = GET_MODE_PRECISION (GET_MODE (XEXP (x, 0)));
/* If the inner object has VOIDmode (the only way this can happen
is if it is an ASM_OPERANDS), we can't do anything since we don't
know how much masking to do. */
pos = INTVAL (XEXP (x, 2));
/* This should stay within the object being extracted, fail otherwise. */
- if (len + pos > GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))))
+ if (len + pos > GET_MODE_PRECISION (GET_MODE (XEXP (x, 0))))
return x;
if (BITS_BIG_ENDIAN)
- pos = GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0))) - len - pos;
+ pos = GET_MODE_PRECISION (GET_MODE (XEXP (x, 0))) - len - pos;
break;
rtx temp2 = expand_compound_operation (temp);
/* Make sure this is a profitable operation. */
- if (rtx_cost (x, SET, optimize_this_for_speed_p)
- > rtx_cost (temp2, SET, optimize_this_for_speed_p))
+ if (set_src_cost (x, optimize_this_for_speed_p)
+ > set_src_cost (temp2, optimize_this_for_speed_p))
return temp2;
- else if (rtx_cost (x, SET, optimize_this_for_speed_p)
- > rtx_cost (temp, SET, optimize_this_for_speed_p))
+ else if (set_src_cost (x, optimize_this_for_speed_p)
+ > set_src_cost (temp, optimize_this_for_speed_p))
return temp;
else
return x;
if (GET_CODE (XEXP (x, 0)) == TRUNCATE
&& GET_MODE (XEXP (XEXP (x, 0), 0)) == GET_MODE (x)
&& COMPARISON_P (XEXP (XEXP (x, 0), 0))
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))
+ && (GET_MODE_PRECISION (GET_MODE (XEXP (x, 0)))
<= HOST_BITS_PER_WIDE_INT)
&& (STORE_FLAG_VALUE & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
return XEXP (XEXP (x, 0), 0);
&& GET_MODE (SUBREG_REG (XEXP (x, 0))) == GET_MODE (x)
&& subreg_lowpart_p (XEXP (x, 0))
&& COMPARISON_P (SUBREG_REG (XEXP (x, 0)))
- && (GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))
+ && (GET_MODE_PRECISION (GET_MODE (XEXP (x, 0)))
<= HOST_BITS_PER_WIDE_INT)
&& (STORE_FLAG_VALUE & ~GET_MODE_MASK (GET_MODE (XEXP (x, 0)))) == 0)
return SUBREG_REG (XEXP (x, 0));
extraction. Then the constant of 31 would be substituted in
to produce such a position. */
- modewidth = GET_MODE_BITSIZE (GET_MODE (x));
+ modewidth = GET_MODE_PRECISION (GET_MODE (x));
if (modewidth >= pos + len)
{
enum machine_mode mode = GET_MODE (x);
&& GET_CODE (XEXP (SET_DEST (x), 0)) == SUBREG)
{
inner = SUBREG_REG (XEXP (SET_DEST (x), 0));
- len = GET_MODE_BITSIZE (GET_MODE (XEXP (SET_DEST (x), 0)));
+ len = GET_MODE_PRECISION (GET_MODE (XEXP (SET_DEST (x), 0)));
pos = GEN_INT (subreg_lsb (XEXP (SET_DEST (x), 0)));
}
else if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
/* A constant position should stay within the width of INNER. */
if (CONST_INT_P (pos)
- && INTVAL (pos) + len > GET_MODE_BITSIZE (GET_MODE (inner)))
+ && INTVAL (pos) + len > GET_MODE_PRECISION (GET_MODE (inner)))
break;
if (BITS_BIG_ENDIAN)
{
if (CONST_INT_P (pos))
- pos = GEN_INT (GET_MODE_BITSIZE (GET_MODE (inner)) - len
+ pos = GEN_INT (GET_MODE_PRECISION (GET_MODE (inner)) - len
- INTVAL (pos));
else if (GET_CODE (pos) == MINUS
&& CONST_INT_P (XEXP (pos, 1))
&& (INTVAL (XEXP (pos, 1))
- == GET_MODE_BITSIZE (GET_MODE (inner)) - len))
+ == GET_MODE_PRECISION (GET_MODE (inner)) - len))
/* If position is ADJUST - X, new position is X. */
pos = XEXP (pos, 0);
else
pos = simplify_gen_binary (MINUS, GET_MODE (pos),
- GEN_INT (GET_MODE_BITSIZE (
+ GEN_INT (GET_MODE_PRECISION (
GET_MODE (inner))
- len),
pos);
: BITS_PER_UNIT)) == 0
/* We can't do this if we are widening INNER_MODE (it
may not be aligned, for one thing). */
- && GET_MODE_BITSIZE (inner_mode) >= GET_MODE_BITSIZE (tmode)
+ && GET_MODE_PRECISION (inner_mode) >= GET_MODE_PRECISION (tmode)
&& (inner_mode == tmode
|| (! mode_dependent_address_p (XEXP (inner, 0))
&& ! MEM_VOLATILE_P (inner))))))
/* POS counts from lsb, but make OFFSET count in memory order. */
if (BYTES_BIG_ENDIAN)
- offset = (GET_MODE_BITSIZE (is_mode) - len - pos) / BITS_PER_UNIT;
+ offset = (GET_MODE_PRECISION (is_mode) - len - pos) / BITS_PER_UNIT;
else
offset = pos / BITS_PER_UNIT;
/* Prefer ZERO_EXTENSION, since it gives more information to
backends. */
- if (rtx_cost (temp, SET, optimize_this_for_speed_p)
- <= rtx_cost (temp1, SET, optimize_this_for_speed_p))
+ if (set_src_cost (temp, optimize_this_for_speed_p)
+ <= set_src_cost (temp1, optimize_this_for_speed_p))
return temp;
return temp1;
}
other cases, we would only be going outside our object in cases when
an original shift would have been undefined. */
if (MEM_P (inner)
- && ((pos_rtx == 0 && pos + len > GET_MODE_BITSIZE (is_mode))
+ && ((pos_rtx == 0 && pos + len > GET_MODE_PRECISION (is_mode))
|| (pos_rtx != 0 && len != 1)))
return 0;
/* Prefer ZERO_EXTENSION, since it gives more information to
backends. */
- if (rtx_cost (temp1, SET, optimize_this_for_speed_p)
- < rtx_cost (temp, SET, optimize_this_for_speed_p))
+ if (set_src_cost (temp1, optimize_this_for_speed_p)
+ < set_src_cost (temp, optimize_this_for_speed_p))
temp = temp1;
}
pos_rtx = temp;
{
enum rtx_code code = GET_CODE (x);
enum machine_mode mode = GET_MODE (x);
- int mode_width = GET_MODE_BITSIZE (mode);
+ int mode_width = GET_MODE_PRECISION (mode);
rtx rhs, lhs;
enum rtx_code next_code;
int i, j;
{
new_rtx = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
new_rtx = make_extraction (mode, new_rtx,
- (GET_MODE_BITSIZE (mode)
+ (GET_MODE_PRECISION (mode)
- INTVAL (XEXP (XEXP (x, 0), 1))),
NULL_RTX, i, 1, 0, in_code == COMPARE);
}
&& GET_CODE (lhs) == ASHIFT
&& CONST_INT_P (XEXP (lhs, 1))
&& INTVAL (rhs) >= INTVAL (XEXP (lhs, 1))
+ && INTVAL (XEXP (lhs, 1)) >= 0
&& INTVAL (rhs) < mode_width)
{
new_rtx = make_compound_operation (XEXP (lhs, 0), next_code);
/* It is not valid to do a right-shift in a narrower mode
than the one it came in with. */
if ((code == LSHIFTRT || code == ASHIFTRT)
- && GET_MODE_BITSIZE (mode) < GET_MODE_BITSIZE (GET_MODE (x)))
+ && GET_MODE_PRECISION (mode) < GET_MODE_PRECISION (GET_MODE (x)))
op_mode = GET_MODE (x);
/* Truncate MASK to fit OP_MODE. */
unsigned HOST_WIDE_INT cval
= UINTVAL (XEXP (x, 1))
| (GET_MODE_MASK (GET_MODE (x)) & ~mask);
- int width = GET_MODE_BITSIZE (GET_MODE (x));
+ int width = GET_MODE_PRECISION (GET_MODE (x));
rtx y;
/* If MODE is narrower than HOST_WIDE_INT and CVAL is a negative
y = simplify_gen_binary (AND, GET_MODE (x),
XEXP (x, 0), GEN_INT (cval));
- if (rtx_cost (y, SET, optimize_this_for_speed_p)
- < rtx_cost (x, SET, optimize_this_for_speed_p))
+ if (set_src_cost (y, optimize_this_for_speed_p)
+ < set_src_cost (x, optimize_this_for_speed_p))
x = y;
}
This may eliminate that PLUS and, later, the AND. */
{
- unsigned int width = GET_MODE_BITSIZE (mode);
+ unsigned int width = GET_MODE_PRECISION (mode);
unsigned HOST_WIDE_INT smask = mask;
/* If MODE is narrower than HOST_WIDE_INT and mask is a negative
&& CONST_INT_P (XEXP (x, 1))
&& ((INTVAL (XEXP (XEXP (x, 0), 1))
+ floor_log2 (INTVAL (XEXP (x, 1))))
- < GET_MODE_BITSIZE (GET_MODE (x)))
+ < GET_MODE_PRECISION (GET_MODE (x)))
&& (UINTVAL (XEXP (x, 1))
& ~nonzero_bits (XEXP (x, 0), GET_MODE (x))) == 0)
{
if (! (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
- && INTVAL (XEXP (x, 1)) < GET_MODE_BITSIZE (mode))
+ && INTVAL (XEXP (x, 1)) < GET_MODE_PRECISION (mode))
&& ! (GET_MODE (XEXP (x, 1)) != VOIDmode
&& (nonzero_bits (XEXP (x, 1), GET_MODE (XEXP (x, 1)))
- < (unsigned HOST_WIDE_INT) GET_MODE_BITSIZE (mode))))
+ < (unsigned HOST_WIDE_INT) GET_MODE_PRECISION (mode))))
break;
/* If the shift count is a constant and we can do arithmetic in
conservative form of the mask. */
if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
- && INTVAL (XEXP (x, 1)) < GET_MODE_BITSIZE (op_mode)
+ && INTVAL (XEXP (x, 1)) < GET_MODE_PRECISION (op_mode)
&& HWI_COMPUTABLE_MODE_P (op_mode))
mask >>= INTVAL (XEXP (x, 1));
else
bit. */
&& ((INTVAL (XEXP (x, 1))
+ num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0))))
- >= GET_MODE_BITSIZE (GET_MODE (x)))
+ >= GET_MODE_PRECISION (GET_MODE (x)))
&& exact_log2 (mask + 1) >= 0
/* Number of bits left after the shift must be more than the mask
needs. */
&& ((INTVAL (XEXP (x, 1)) + exact_log2 (mask + 1))
- <= GET_MODE_BITSIZE (GET_MODE (x)))
+ <= GET_MODE_PRECISION (GET_MODE (x)))
/* Must be more sign bit copies than the mask needs. */
&& ((int) num_sign_bit_copies (XEXP (x, 0), GET_MODE (XEXP (x, 0)))
>= exact_log2 (mask + 1)))
x = simplify_gen_binary (LSHIFTRT, GET_MODE (x), XEXP (x, 0),
- GEN_INT (GET_MODE_BITSIZE (GET_MODE (x))
+ GEN_INT (GET_MODE_PRECISION (GET_MODE (x))
- exact_log2 (mask + 1)));
goto shiftrt;
represent a mask for all its bits in a single scalar.
But we only care about the lower bits, so calculate these. */
- if (GET_MODE_BITSIZE (GET_MODE (x)) > HOST_BITS_PER_WIDE_INT)
+ if (GET_MODE_PRECISION (GET_MODE (x)) > HOST_BITS_PER_WIDE_INT)
{
nonzero = ~(unsigned HOST_WIDE_INT) 0;
- /* GET_MODE_BITSIZE (GET_MODE (x)) - INTVAL (XEXP (x, 1))
+ /* GET_MODE_PRECISION (GET_MODE (x)) - INTVAL (XEXP (x, 1))
is the number of bits a full-width mask would have set.
We need only shift if these are fewer than nonzero can
hold. If not, we must keep all bits set in nonzero. */
- if (GET_MODE_BITSIZE (GET_MODE (x)) - INTVAL (XEXP (x, 1))
+ if (GET_MODE_PRECISION (GET_MODE (x)) - INTVAL (XEXP (x, 1))
< HOST_BITS_PER_WIDE_INT)
nonzero >>= INTVAL (XEXP (x, 1))
+ HOST_BITS_PER_WIDE_INT
- - GET_MODE_BITSIZE (GET_MODE (x)) ;
+ - GET_MODE_PRECISION (GET_MODE (x)) ;
}
else
{
{
x = simplify_shift_const
(NULL_RTX, LSHIFTRT, GET_MODE (x), XEXP (x, 0),
- GET_MODE_BITSIZE (GET_MODE (x)) - 1 - i);
+ GET_MODE_PRECISION (GET_MODE (x)) - 1 - i);
if (GET_CODE (x) != ASHIFTRT)
return force_to_mode (x, mode, mask, next_select);
&& CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& (INTVAL (XEXP (x, 1))
- <= GET_MODE_BITSIZE (GET_MODE (x)) - (floor_log2 (mask) + 1))
+ <= GET_MODE_PRECISION (GET_MODE (x)) - (floor_log2 (mask) + 1))
&& GET_CODE (XEXP (x, 0)) == ASHIFT
&& XEXP (XEXP (x, 0), 1) == XEXP (x, 1))
return force_to_mode (XEXP (XEXP (x, 0), 0), mode, mask,
&& CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& (INTVAL (XEXP (XEXP (x, 0), 1)) + floor_log2 (mask)
- < GET_MODE_BITSIZE (GET_MODE (x)))
+ < GET_MODE_PRECISION (GET_MODE (x)))
&& INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT)
{
temp = gen_int_mode (mask << INTVAL (XEXP (XEXP (x, 0), 1)),
false values when testing X. */
else if (x == constm1_rtx || x == const0_rtx
|| (mode != VOIDmode
- && num_sign_bit_copies (x, mode) == GET_MODE_BITSIZE (mode)))
+ && num_sign_bit_copies (x, mode) == GET_MODE_PRECISION (mode)))
{
*ptrue = constm1_rtx, *pfalse = const0_rtx;
return x;
return x;
pos = get_pos_from_mask ((~c1) & GET_MODE_MASK (GET_MODE (dest)), &len);
- if (pos < 0 || pos + len > GET_MODE_BITSIZE (GET_MODE (dest))
- || GET_MODE_BITSIZE (GET_MODE (dest)) > HOST_BITS_PER_WIDE_INT
+ if (pos < 0 || pos + len > GET_MODE_PRECISION (GET_MODE (dest))
+ || GET_MODE_PRECISION (GET_MODE (dest)) > HOST_BITS_PER_WIDE_INT
|| (c1 & nonzero_bits (other, GET_MODE (dest))) != 0)
return x;
other, pos),
dest);
src = force_to_mode (src, mode,
- GET_MODE_BITSIZE (mode) >= HOST_BITS_PER_WIDE_INT
+ GET_MODE_PRECISION (mode) >= HOST_BITS_PER_WIDE_INT
? ~(unsigned HOST_WIDE_INT) 0
: ((unsigned HOST_WIDE_INT) 1 << len) - 1,
0);
tmp = apply_distributive_law (simplify_gen_binary (inner_code, mode,
new_op0, new_op1));
if (GET_CODE (tmp) != outer_code
- && rtx_cost (tmp, SET, optimize_this_for_speed_p)
- < rtx_cost (x, SET, optimize_this_for_speed_p))
+ && (set_src_cost (tmp, optimize_this_for_speed_p)
+ < set_src_cost (x, optimize_this_for_speed_p)))
return tmp;
return NULL_RTX;
{
unsigned HOST_WIDE_INT mask = rsp->nonzero_bits;
- if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode))
+ if (GET_MODE_PRECISION (GET_MODE (x)) < GET_MODE_PRECISION (mode))
/* We don't know anything about the upper bits. */
mask |= GET_MODE_MASK (mode) ^ GET_MODE_MASK (GET_MODE (x));
*nonzero &= mask;
return tem;
if (nonzero_sign_valid && rsp->sign_bit_copies != 0
- && GET_MODE_BITSIZE (GET_MODE (x)) == GET_MODE_BITSIZE (mode))
+ && GET_MODE_PRECISION (GET_MODE (x)) == GET_MODE_PRECISION (mode))
*result = rsp->sign_bit_copies;
return NULL;
return (unsignedp
? (HWI_COMPUTABLE_MODE_P (mode)
- ? (unsigned int) (GET_MODE_BITSIZE (mode) - 1
+ ? (unsigned int) (GET_MODE_PRECISION (mode) - 1
- floor_log2 (nonzero_bits (x, mode)))
: 0)
: num_sign_bit_copies (x, mode) - 1);
{
if (orig_mode == mode)
return mode;
- gcc_assert (GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (orig_mode));
+ gcc_assert (GET_MODE_PRECISION (mode) > GET_MODE_PRECISION (orig_mode));
/* In general we can't perform in wider mode for right shift and rotate. */
switch (code)
/* We can still widen if the bits brought in from the left are identical
to the sign bit of ORIG_MODE. */
if (num_sign_bit_copies (op, mode)
- > (unsigned) (GET_MODE_BITSIZE (mode)
- - GET_MODE_BITSIZE (orig_mode)))
+ > (unsigned) (GET_MODE_PRECISION (mode)
+ - GET_MODE_PRECISION (orig_mode)))
return mode;
return orig_mode;
int care_bits = low_bitmask_len (orig_mode, outer_const);
if (care_bits >= 0
- && GET_MODE_BITSIZE (orig_mode) - care_bits >= count)
+ && GET_MODE_PRECISION (orig_mode) - care_bits >= count)
return mode;
}
/* fall through */
}
}
-/* Simplify a shift of VAROP by COUNT bits. CODE says what kind of shift.
- The result of the shift is RESULT_MODE. Return NULL_RTX if we cannot
- simplify it. Otherwise, return a simplified value.
+/* Simplify a shift of VAROP by ORIG_COUNT bits. CODE says what kind
+ of shift. The result of the shift is RESULT_MODE. Return NULL_RTX
+ if we cannot simplify it. Otherwise, return a simplified value.
The shift is normally computed in the widest mode we find in VAROP, as
long as it isn't a different number of words than RESULT_MODE. Exceptions
want to do this inside the loop as it makes it more difficult to
combine shifts. */
if (SHIFT_COUNT_TRUNCATED)
- orig_count &= targetm.shift_truncation_mask (mode);
+ orig_count &= GET_MODE_BITSIZE (mode) - 1;
/* If we were given an invalid count, don't do anything except exactly
what was requested. */
- if (orig_count < 0 || orig_count >= (int) GET_MODE_BITSIZE (mode))
+ if (orig_count < 0 || orig_count >= (int) GET_MODE_PRECISION (mode))
return NULL_RTX;
count = orig_count;
/* Convert ROTATERT to ROTATE. */
if (code == ROTATERT)
{
- unsigned int bitsize = GET_MODE_BITSIZE (result_mode);;
+ unsigned int bitsize = GET_MODE_PRECISION (result_mode);
code = ROTATE;
if (VECTOR_MODE_P (result_mode))
count = bitsize / GET_MODE_NUNITS (result_mode) - count;
multiple operations, each of which are defined, we know what the
result is supposed to be. */
- if (count > (GET_MODE_BITSIZE (shift_mode) - 1))
+ if (count > (GET_MODE_PRECISION (shift_mode) - 1))
{
if (code == ASHIFTRT)
- count = GET_MODE_BITSIZE (shift_mode) - 1;
+ count = GET_MODE_PRECISION (shift_mode) - 1;
else if (code == ROTATE || code == ROTATERT)
- count %= GET_MODE_BITSIZE (shift_mode);
+ count %= GET_MODE_PRECISION (shift_mode);
else
{
/* We can't simply return zero because there may be an
is a no-op. */
if (code == ASHIFTRT
&& (num_sign_bit_copies (varop, shift_mode)
- == GET_MODE_BITSIZE (shift_mode)))
+ == GET_MODE_PRECISION (shift_mode)))
{
count = 0;
break;
if (code == ASHIFTRT
&& (count + num_sign_bit_copies (varop, shift_mode)
- >= GET_MODE_BITSIZE (shift_mode)))
- count = GET_MODE_BITSIZE (shift_mode) - 1;
+ >= GET_MODE_PRECISION (shift_mode)))
+ count = GET_MODE_PRECISION (shift_mode) - 1;
/* We simplify the tests below and elsewhere by converting
ASHIFTRT to LSHIFTRT if we know the sign bit is clear.
AND of a new shift with a mask. We compute the result below. */
if (CONST_INT_P (XEXP (varop, 1))
&& INTVAL (XEXP (varop, 1)) >= 0
- && INTVAL (XEXP (varop, 1)) < GET_MODE_BITSIZE (GET_MODE (varop))
+ && INTVAL (XEXP (varop, 1)) < GET_MODE_PRECISION (GET_MODE (varop))
&& HWI_COMPUTABLE_MODE_P (result_mode)
&& HWI_COMPUTABLE_MODE_P (mode)
&& !VECTOR_MODE_P (result_mode))
we have (ashift:M1 (subreg:M1 (ashiftrt:M2 FOO C1) 0) C2)
with C2 == GET_MODE_BITSIZE (M1) - GET_MODE_BITSIZE (M2),
we can convert it to
- (ashiftrt:M1 (ashift:M1 (and:M1 (subreg:M1 FOO 0 C2) C3) C1).
+ (ashiftrt:M1 (ashift:M1 (and:M1 (subreg:M1 FOO 0) C3) C2) C1).
This simplifies certain SIGN_EXTEND operations. */
if (code == ASHIFT && first_code == ASHIFTRT
- && count == (GET_MODE_BITSIZE (result_mode)
- - GET_MODE_BITSIZE (GET_MODE (varop))))
+ && count == (GET_MODE_PRECISION (result_mode)
+ - GET_MODE_PRECISION (GET_MODE (varop))))
{
/* C3 has the low-order C1 bits zero. */
if (code == ASHIFTRT
|| (code == ROTATE && first_code == ASHIFTRT)
- || GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT
+ || GET_MODE_PRECISION (mode) > HOST_BITS_PER_WIDE_INT
|| (GET_MODE (varop) != result_mode
&& (first_code == ASHIFTRT || first_code == LSHIFTRT
|| first_code == ROTATE
&& XEXP (XEXP (varop, 0), 1) == constm1_rtx
&& (STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
&& (code == LSHIFTRT || code == ASHIFTRT)
- && count == (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
+ && count == (GET_MODE_PRECISION (GET_MODE (varop)) - 1)
&& rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
{
count = 0;
case EQ:
/* Convert (lshiftrt (eq FOO 0) C) to (xor FOO 1) if STORE_FLAG_VALUE
says that the sign bit can be tested, FOO has mode MODE, C is
- GET_MODE_BITSIZE (MODE) - 1, and FOO has only its low-order bit
+ GET_MODE_PRECISION (MODE) - 1, and FOO has only its low-order bit
that may be nonzero. */
if (code == LSHIFTRT
&& XEXP (varop, 1) == const0_rtx
&& GET_MODE (XEXP (varop, 0)) == result_mode
- && count == (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_PRECISION (result_mode) - 1)
&& HWI_COMPUTABLE_MODE_P (result_mode)
&& STORE_FLAG_VALUE == -1
&& nonzero_bits (XEXP (varop, 0), result_mode) == 1
/* (lshiftrt (neg A) C) where A is either 0 or 1 and C is one less
than the number of bits in the mode is equivalent to A. */
if (code == LSHIFTRT
- && count == (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_PRECISION (result_mode) - 1)
&& nonzero_bits (XEXP (varop, 0), result_mode) == 1)
{
varop = XEXP (varop, 0);
is one less than the number of bits in the mode is
equivalent to (xor A 1). */
if (code == LSHIFTRT
- && count == (GET_MODE_BITSIZE (result_mode) - 1)
+ && count == (GET_MODE_PRECISION (result_mode) - 1)
&& XEXP (varop, 1) == constm1_rtx
&& nonzero_bits (XEXP (varop, 0), result_mode) == 1
&& merge_outer_ops (&outer_op, &outer_const, XOR, 1, result_mode,
if ((STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
&& GET_CODE (XEXP (varop, 0)) == ASHIFTRT
- && count == (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
+ && count == (GET_MODE_PRECISION (GET_MODE (varop)) - 1)
&& (code == LSHIFTRT || code == ASHIFTRT)
&& CONST_INT_P (XEXP (XEXP (varop, 0), 1))
&& INTVAL (XEXP (XEXP (varop, 0), 1)) == count
&& GET_CODE (XEXP (varop, 0)) == LSHIFTRT
&& CONST_INT_P (XEXP (XEXP (varop, 0), 1))
&& (INTVAL (XEXP (XEXP (varop, 0), 1))
- >= (GET_MODE_BITSIZE (GET_MODE (XEXP (varop, 0)))
- - GET_MODE_BITSIZE (GET_MODE (varop)))))
+ >= (GET_MODE_PRECISION (GET_MODE (XEXP (varop, 0)))
+ - GET_MODE_PRECISION (GET_MODE (varop)))))
{
rtx varop_inner = XEXP (varop, 0);
if (outer_op != UNKNOWN)
{
if (GET_RTX_CLASS (outer_op) != RTX_UNARY
- && GET_MODE_BITSIZE (result_mode) < HOST_BITS_PER_WIDE_INT)
+ && GET_MODE_PRECISION (result_mode) < HOST_BITS_PER_WIDE_INT)
outer_const = trunc_int_for_mode (outer_const, result_mode);
if (outer_op == AND)
simplify_compare_const (enum rtx_code code, rtx op0, rtx *pop1)
{
enum machine_mode mode = GET_MODE (op0);
- unsigned int mode_width = GET_MODE_BITSIZE (mode);
+ unsigned int mode_width = GET_MODE_PRECISION (mode);
HOST_WIDE_INT const_op = INTVAL (*pop1);
/* Get the constant we are comparing against and turn off all bits
&& XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
&& XEXP (op0, 1) == XEXP (XEXP (op1, 0), 1)
&& (INTVAL (XEXP (op0, 1))
- == (GET_MODE_BITSIZE (GET_MODE (op0))
- - (GET_MODE_BITSIZE
+ == (GET_MODE_PRECISION (GET_MODE (op0))
+ - (GET_MODE_PRECISION
(GET_MODE (SUBREG_REG (XEXP (XEXP (op0, 0), 0))))))))
{
op0 = SUBREG_REG (XEXP (XEXP (op0, 0), 0));
&& GET_CODE (inner_op1) == SUBREG
&& (GET_MODE (SUBREG_REG (inner_op0))
== GET_MODE (SUBREG_REG (inner_op1)))
- && (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (inner_op0)))
+ && (GET_MODE_PRECISION (GET_MODE (SUBREG_REG (inner_op0)))
<= HOST_BITS_PER_WIDE_INT)
&& (0 == ((~c0) & nonzero_bits (SUBREG_REG (inner_op0),
GET_MODE (SUBREG_REG (inner_op0)))))
while (CONST_INT_P (op1))
{
enum machine_mode mode = GET_MODE (op0);
- unsigned int mode_width = GET_MODE_BITSIZE (mode);
+ unsigned int mode_width = GET_MODE_PRECISION (mode);
unsigned HOST_WIDE_INT mask = GET_MODE_MASK (mode);
int equality_comparison_p;
int sign_bit_comparison_p;
if (sign_bit_comparison_p && HWI_COMPUTABLE_MODE_P (mode))
op0 = force_to_mode (op0, mode,
(unsigned HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (mode) - 1),
+ << (GET_MODE_PRECISION (mode) - 1),
0);
/* Now try cases based on the opcode of OP0. If none of the cases
else
{
mode = new_mode;
- i = (GET_MODE_BITSIZE (mode) - 1 - i);
+ i = (GET_MODE_PRECISION (mode) - 1 - i);
}
}
if (mode_width <= HOST_BITS_PER_WIDE_INT
&& subreg_lowpart_p (op0)
- && GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0))) > mode_width
+ && GET_MODE_PRECISION (GET_MODE (SUBREG_REG (op0))) > mode_width
&& GET_CODE (SUBREG_REG (op0)) == PLUS
&& CONST_INT_P (XEXP (SUBREG_REG (op0), 1)))
{
/* (A - C1) sign-extends if it is positive and 1-extends
if it is negative, C2 both sign- and 1-extends. */
|| (num_sign_bit_copies (a, inner_mode)
- > (unsigned int) (GET_MODE_BITSIZE (inner_mode)
+ > (unsigned int) (GET_MODE_PRECISION (inner_mode)
- mode_width)
&& const_op < 0)))
|| ((unsigned HOST_WIDE_INT) c1
< (unsigned HOST_WIDE_INT) 1 << (mode_width - 2)
/* (A - C1) always sign-extends, like C2. */
&& num_sign_bit_copies (a, inner_mode)
- > (unsigned int) (GET_MODE_BITSIZE (inner_mode)
+ > (unsigned int) (GET_MODE_PRECISION (inner_mode)
- (mode_width - 1))))
{
op0 = SUBREG_REG (op0);
/* If the inner mode is narrower and we are extracting the low part,
we can treat the SUBREG as if it were a ZERO_EXTEND. */
if (subreg_lowpart_p (op0)
- && GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0))) < mode_width)
+ && GET_MODE_PRECISION (GET_MODE (SUBREG_REG (op0))) < mode_width)
/* Fall through */ ;
else
break;
the code has been changed. */
&& (0
#ifdef WORD_REGISTER_OPERATIONS
- || (mode_width > GET_MODE_BITSIZE (tmode)
+ || (mode_width > GET_MODE_PRECISION (tmode)
&& mode_width <= BITS_PER_WORD)
#endif
- || (mode_width <= GET_MODE_BITSIZE (tmode)
+ || (mode_width <= GET_MODE_PRECISION (tmode)
&& subreg_lowpart_p (XEXP (op0, 0))))
&& CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT
op1 = gen_lowpart (GET_MODE (op0), op1);
}
}
- else if ((GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0)))
+ else if ((GET_MODE_PRECISION (GET_MODE (SUBREG_REG (op0)))
<= HOST_BITS_PER_WIDE_INT)
&& (nonzero_bits (SUBREG_REG (op0),
GET_MODE (SUBREG_REG (op0)))
if (zero_extended
|| ((num_sign_bit_copies (op0, tmode)
- > (unsigned int) (GET_MODE_BITSIZE (tmode)
- - GET_MODE_BITSIZE (mode)))
+ > (unsigned int) (GET_MODE_PRECISION (tmode)
+ - GET_MODE_PRECISION (mode)))
&& (num_sign_bit_copies (op1, tmode)
- > (unsigned int) (GET_MODE_BITSIZE (tmode)
- - GET_MODE_BITSIZE (mode)))))
+ > (unsigned int) (GET_MODE_PRECISION (tmode)
+ - GET_MODE_PRECISION (mode)))))
{
/* If OP0 is an AND and we don't have an AND in MODE either,
make a new AND in the proper mode. */
else if (GET_CODE (setter) == SET
&& GET_CODE (SET_DEST (setter)) == SUBREG
&& SUBREG_REG (SET_DEST (setter)) == dest
- && GET_MODE_BITSIZE (GET_MODE (dest)) <= BITS_PER_WORD
+ && GET_MODE_PRECISION (GET_MODE (dest)) <= BITS_PER_WORD
&& subreg_lowpart_p (SET_DEST (setter)))
record_value_for_reg (dest, record_dead_insn,
gen_lowpart (GET_MODE (dest),
unsigned int regno = REGNO (SUBREG_REG (subreg));
enum machine_mode mode = GET_MODE (subreg);
- if (GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT)
+ if (GET_MODE_PRECISION (mode) > HOST_BITS_PER_WIDE_INT)
return;
for (links = LOG_LINKS (insn); links;)
}
break;
+ case REG_ARGS_SIZE:
+ {
+ /* ??? How to distribute between i3-i1. Assume i3 contains the
+ entire adjustment. Assert i3 contains at least some adjust. */
+ int old_size, args_size = INTVAL (XEXP (note, 0));
+ old_size = fixup_args_size_notes (PREV_INSN (i3), i3, args_size);
+ gcc_assert (old_size != args_size);
+ }
+ break;
+
case REG_NORETURN:
case REG_SETJMP:
/* These notes must remain with the call. It should not be
OSDN Git Service
