/* Optimize by combining instructions for GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/* This module is essentially the "combiner" phase of the U. of Arizona
Portable Optimizer, but redone to work on our list-structured
#include "expr.h"
#include "insn-attr.h"
#include "recog.h"
-#include "real.h"
#include "toplev.h"
#include "target.h"
#include "optabs.h"
#include "timevar.h"
#include "tree-pass.h"
#include "df.h"
+#include "cgraph.h"
/* Number of attempts to combine instructions in this function. */
static rtx i2mod_new_rhs;
\f
-/* Maximum register number, which is the size of the tables below. */
-
-static unsigned int combine_max_regno;
-
-struct reg_stat {
+typedef struct reg_stat_struct {
/* Record last point of death of (hard or pseudo) register n. */
rtx last_death;
value. */
ENUM_BITFIELD(machine_mode) truncated_to_mode : 8;
-};
+} reg_stat_type;
+
+DEF_VEC_O(reg_stat_type);
+DEF_VEC_ALLOC_O(reg_stat_type,heap);
-static struct reg_stat *reg_stat;
+static VEC(reg_stat_type,heap) *reg_stat;
/* Record the luid of the last insn that invalidated memory
(anything that writes memory, and subroutine calls, but not pushes). */
/* Basic block in which we are performing combines. */
static basic_block this_basic_block;
+static bool optimize_this_for_speed_p;
\f
/* Length of the currently allocated uid_insn_cost array. */
static int label_tick;
-/* Reset to label_tick for each label. */
+/* Reset to label_tick for each extended basic block in scanning order. */
static int label_tick_ebb_start;
/* Record one modification to rtl structure
to be undone by storing old_contents into *where. */
+enum undo_kind { UNDO_RTX, UNDO_INT, UNDO_MODE };
+
struct undo
{
struct undo *next;
- enum { UNDO_RTX, UNDO_INT, UNDO_MODE } kind;
+ enum undo_kind kind;
union { rtx r; int i; enum machine_mode m; } old_contents;
union { rtx *r; int *i; } where;
};
static int n_occurrences;
-static rtx reg_nonzero_bits_for_combine (rtx, enum machine_mode, rtx,
+static rtx reg_nonzero_bits_for_combine (const_rtx, enum machine_mode, const_rtx,
enum machine_mode,
unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT *);
-static rtx reg_num_sign_bit_copies_for_combine (rtx, enum machine_mode, rtx,
+static rtx reg_num_sign_bit_copies_for_combine (const_rtx, enum machine_mode, const_rtx,
enum machine_mode,
unsigned int, unsigned int *);
static void do_SUBST (rtx *, rtx);
static void do_SUBST_INT (int *, int);
static void init_reg_last (void);
static void setup_incoming_promotions (rtx);
-static void set_nonzero_bits_and_sign_copies (rtx, rtx, void *);
+static void set_nonzero_bits_and_sign_copies (rtx, const_rtx, void *);
static int cant_combine_insn_p (rtx);
static int can_combine_p (rtx, rtx, rtx, rtx, rtx *, rtx *);
static int combinable_i3pat (rtx, rtx *, rtx, rtx, int, rtx *);
static rtx try_combine (rtx, rtx, rtx, int *);
static void undo_all (void);
static void undo_commit (void);
-static rtx *find_split_point (rtx *, rtx);
+static rtx *find_split_point (rtx *, rtx, bool);
static rtx subst (rtx, rtx, rtx, int, int);
static rtx combine_simplify_rtx (rtx, enum machine_mode, int);
static rtx simplify_if_then_else (rtx);
static rtx simplify_set (rtx);
static rtx simplify_logical (rtx);
static rtx expand_compound_operation (rtx);
-static rtx expand_field_assignment (rtx);
+static const_rtx expand_field_assignment (const_rtx);
static rtx make_extraction (enum machine_mode, rtx, HOST_WIDE_INT,
rtx, unsigned HOST_WIDE_INT, int, int, int);
static rtx extract_left_shift (rtx, int);
static enum rtx_code simplify_comparison (enum rtx_code, rtx *, rtx *);
static void update_table_tick (rtx);
static void record_value_for_reg (rtx, rtx, rtx);
-static void check_conversions (rtx, rtx);
-static void record_dead_and_set_regs_1 (rtx, rtx, void *);
+static void check_promoted_subreg (rtx, rtx);
+static void record_dead_and_set_regs_1 (rtx, const_rtx, void *);
static void record_dead_and_set_regs (rtx);
static int get_last_value_validate (rtx *, rtx, int, int);
-static rtx get_last_value (rtx);
-static int use_crosses_set_p (rtx, int);
-static void reg_dead_at_p_1 (rtx, rtx, void *);
+static rtx get_last_value (const_rtx);
+static int use_crosses_set_p (const_rtx, int);
+static void reg_dead_at_p_1 (rtx, const_rtx, void *);
static int reg_dead_at_p (rtx, rtx);
static void move_deaths (rtx, rtx, int, rtx, rtx *);
static int reg_bitfield_target_p (rtx, rtx);
static void record_promoted_value (rtx, rtx);
static int unmentioned_reg_p_1 (rtx *, void *);
static bool unmentioned_reg_p (rtx, rtx);
-static void record_truncated_value (rtx);
-static bool reg_truncated_to_mode (enum machine_mode, rtx);
+static int record_truncated_value (rtx *, void *);
+static void record_truncated_values (rtx *, void *);
+static bool reg_truncated_to_mode (enum machine_mode, const_rtx);
static rtx gen_lowpart_or_truncate (enum machine_mode, rtx);
\f
static const struct rtl_hooks combine_rtl_hooks = RTL_HOOKS_INITIALIZER;
\f
+/* Try to split PATTERN found in INSN. This returns NULL_RTX if
+ PATTERN can not be split. Otherwise, it returns an insn sequence.
+ This is a wrapper around split_insns which ensures that the
+ reg_stat vector is made larger if the splitter creates a new
+ register. */
+
+static rtx
+combine_split_insns (rtx pattern, rtx insn)
+{
+ rtx ret;
+ unsigned int nregs;
+
+ ret = split_insns (pattern, insn);
+ nregs = max_reg_num ();
+ if (nregs > VEC_length (reg_stat_type, reg_stat))
+ VEC_safe_grow_cleared (reg_stat_type, heap, reg_stat, nregs);
+ return ret;
+}
+
/* This is used by find_single_use to locate an rtx in LOC that
contains exactly one use of DEST, which is typically either a REG
or CC0. It returns a pointer to the innermost rtx expression
static rtx *
find_single_use (rtx dest, rtx insn, rtx *ploc)
{
+ basic_block bb;
rtx next;
rtx *result;
rtx link;
if (!REG_P (dest))
return 0;
- for (next = next_nonnote_insn (insn);
- next != 0 && !LABEL_P (next);
- next = next_nonnote_insn (next))
+ bb = BLOCK_FOR_INSN (insn);
+ for (next = NEXT_INSN (insn);
+ next && BLOCK_FOR_INSN (next) == bb;
+ next = NEXT_INSN (next))
if (INSN_P (next) && dead_or_set_p (next, dest))
{
for (link = LOG_LINKS (next); link; link = XEXP (link, 1))
little gain doing the checks here. Focus on catching invalid
transformations involving integer constants. */
if (GET_MODE_CLASS (GET_MODE (oldval)) == MODE_INT
- && GET_CODE (newval) == CONST_INT)
+ && CONST_INT_P (newval))
{
/* Sanity check that we're replacing oldval with a CONST_INT
that is a valid sign-extension for the original mode. */
perform this test on oldval instead, checking whether an
invalid replacement took place before we got here. */
gcc_assert (!(GET_CODE (oldval) == SUBREG
- && GET_CODE (SUBREG_REG (oldval)) == CONST_INT));
+ && CONST_INT_P (SUBREG_REG (oldval))));
gcc_assert (!(GET_CODE (oldval) == ZERO_EXTEND
- && GET_CODE (XEXP (oldval, 0)) == CONST_INT));
+ && CONST_INT_P (XEXP (oldval, 0))));
}
if (undobuf.frees)
buf->kind = UNDO_MODE;
buf->where.r = into;
buf->old_contents.m = oldval;
- PUT_MODE (*into, newval);
+ adjust_reg_mode (*into, newval);
buf->next = undobuf.undos, undobuf.undos = buf;
}
#define SUBST_MODE(INTO, NEWVAL) do_SUBST_MODE(&(INTO), (NEWVAL))
\f
/* Subroutine of try_combine. Determine whether the combine replacement
- patterns NEWPAT and NEWI2PAT are cheaper according to insn_rtx_cost
- that the original instruction sequence I1, I2 and I3. Note that I1
- and/or NEWI2PAT may be NULL_RTX. This function returns false, if the
- costs of all instructions can be estimated, and the replacements are
- more expensive than the original sequence. */
+ patterns NEWPAT, NEWI2PAT and NEWOTHERPAT are cheaper according to
+ insn_rtx_cost that the original instruction sequence I1, I2, I3 and
+ undobuf.other_insn. Note that I1 and/or NEWI2PAT may be NULL_RTX.
+ NEWOTHERPAT and undobuf.other_insn may also both be NULL_RTX. This
+ function returns false, if the costs of all instructions can be
+ estimated, and the replacements are more expensive than the original
+ sequence. */
static bool
-combine_validate_cost (rtx i1, rtx i2, rtx i3, rtx newpat, rtx newi2pat)
+combine_validate_cost (rtx i1, rtx i2, rtx i3, rtx newpat, rtx newi2pat,
+ rtx newotherpat)
{
int i1_cost, i2_cost, i3_cost;
int new_i2_cost, new_i3_cost;
}
/* Calculate the replacement insn_rtx_costs. */
- new_i3_cost = insn_rtx_cost (newpat);
+ new_i3_cost = insn_rtx_cost (newpat, optimize_this_for_speed_p);
if (newi2pat)
{
- new_i2_cost = insn_rtx_cost (newi2pat);
+ new_i2_cost = insn_rtx_cost (newi2pat, optimize_this_for_speed_p);
new_cost = (new_i2_cost > 0 && new_i3_cost > 0)
? new_i2_cost + new_i3_cost : 0;
}
int old_other_cost, new_other_cost;
old_other_cost = INSN_COST (undobuf.other_insn);
- new_other_cost = insn_rtx_cost (PATTERN (undobuf.other_insn));
+ new_other_cost = insn_rtx_cost (newotherpat, optimize_this_for_speed_p);
if (old_other_cost > 0 && new_other_cost > 0)
{
old_cost += old_other_cost;
next = NEXT_INSN (insn);
if (INSN_P (insn) && noop_move_p (insn))
{
- rtx note;
-
- /* If we're about to remove the first insn of a libcall
- then move the libcall note to the next real insn and
- update the retval note. */
- if ((note = find_reg_note (insn, REG_LIBCALL, NULL_RTX))
- && XEXP (note, 0) != insn)
- {
- rtx new_libcall_insn = next_real_insn (insn);
- rtx retval_note = find_reg_note (XEXP (note, 0),
- REG_RETVAL, NULL_RTX);
- REG_NOTES (new_libcall_insn)
- = gen_rtx_INSN_LIST (REG_LIBCALL, XEXP (note, 0),
- REG_NOTES (new_libcall_insn));
- XEXP (retval_note, 0) = new_libcall_insn;
- }
-
if (dump_file)
fprintf (dump_file, "deleting noop move %d\n", INSN_UID (insn));
{
basic_block bb;
rtx *next_use, insn;
- struct df_ref **def_vec, **use_vec;
+ df_ref *def_vec, *use_vec;
next_use = XCNEWVEC (rtx, max_reg_num ());
register and establishing log links when def is encountered.
Note that we do not clear next_use array in order to save time,
so we have to test whether the use is in the same basic block as def.
-
+
There are a few cases below when we do not consider the definition or
usage -- these are taken from original flow.c did. Don't ask me why it is
done this way; I don't know and if it works, I don't want to know. */
{
FOR_BB_INSNS_REVERSE (bb, insn)
{
- if (!INSN_P (insn))
+ if (!NONDEBUG_INSN_P (insn))
continue;
/* Log links are created only once. */
for (def_vec = DF_INSN_DEFS (insn); *def_vec; def_vec++)
{
- struct df_ref *def = *def_vec;
+ df_ref def = *def_vec;
int regno = DF_REF_REGNO (def);
rtx use_insn;
assignments later. */
if (regno >= FIRST_PSEUDO_REGISTER
|| asm_noperands (PATTERN (use_insn)) < 0)
- LOG_LINKS (use_insn) =
- alloc_INSN_LIST (insn, LOG_LINKS (use_insn));
+ {
+ /* Don't add duplicate links between instructions. */
+ rtx links;
+ for (links = LOG_LINKS (use_insn); links;
+ links = XEXP (links, 1))
+ if (insn == XEXP (links, 0))
+ break;
+
+ if (!links)
+ LOG_LINKS (use_insn) =
+ alloc_INSN_LIST (insn, LOG_LINKS (use_insn));
+ }
}
next_use[regno] = NULL_RTX;
}
for (use_vec = DF_INSN_USES (insn); *use_vec; use_vec++)
{
- struct df_ref *use = *use_vec;
+ df_ref use = *use_vec;
int regno = DF_REF_REGNO (use);
/* Do not consider the usage of the stack pointer
if (INSN_P (insn))
free_INSN_LIST_list (&LOG_LINKS (insn));
}
-
-
-
\f
/* Main entry point for combiner. F is the first insn of the function.
NREGS is the first unused pseudo-reg number.
#endif
rtx links, nextlinks;
rtx first;
+ basic_block last_bb;
int new_direct_jump_p = 0;
combine_extras = 0;
combine_successes = 0;
- combine_max_regno = nregs;
-
rtl_hooks = combine_rtl_hooks;
- reg_stat = XCNEWVEC (struct reg_stat, nregs);
+ VEC_safe_grow_cleared (reg_stat_type, heap, reg_stat, nregs);
init_recog_no_volatile ();
problems when, for example, we have j <<= 1 in a loop. */
nonzero_sign_valid = 0;
+ label_tick = label_tick_ebb_start = 1;
/* Scan all SETs and see if we can deduce anything about what
bits are known to be zero for some registers and how many copies
Also set any known values so that we can use it while searching
for what bits are known to be set. */
- label_tick = label_tick_ebb_start = 1;
-
setup_incoming_promotions (first);
+ /* Allow the entry block and the first block to fall into the same EBB.
+ Conceptually the incoming promotions are assigned to the entry block. */
+ last_bb = ENTRY_BLOCK_PTR;
create_log_links ();
FOR_EACH_BB (this_basic_block)
{
+ optimize_this_for_speed_p = optimize_bb_for_speed_p (this_basic_block);
last_call_luid = 0;
mem_last_set = -1;
+
label_tick++;
+ if (!single_pred_p (this_basic_block)
+ || single_pred (this_basic_block) != last_bb)
+ label_tick_ebb_start = label_tick;
+ last_bb = this_basic_block;
+
FOR_BB_INSNS (this_basic_block, insn)
if (INSN_P (insn) && BLOCK_FOR_INSN (insn))
{
/* Record the current insn_rtx_cost of this instruction. */
if (NONJUMP_INSN_P (insn))
- INSN_COST (insn) = insn_rtx_cost (PATTERN (insn));
+ INSN_COST (insn) = insn_rtx_cost (PATTERN (insn),
+ optimize_this_for_speed_p);
if (dump_file)
fprintf(dump_file, "insn_cost %d: %d\n",
INSN_UID (insn), INSN_COST (insn));
}
- else if (LABEL_P (insn))
- label_tick_ebb_start = label_tick;
}
nonzero_sign_valid = 1;
/* Now scan all the insns in forward order. */
-
label_tick = label_tick_ebb_start = 1;
init_reg_last ();
setup_incoming_promotions (first);
+ last_bb = ENTRY_BLOCK_PTR;
FOR_EACH_BB (this_basic_block)
{
+ optimize_this_for_speed_p = optimize_bb_for_speed_p (this_basic_block);
last_call_luid = 0;
mem_last_set = -1;
+
label_tick++;
+ if (!single_pred_p (this_basic_block)
+ || single_pred (this_basic_block) != last_bb)
+ label_tick_ebb_start = label_tick;
+ last_bb = this_basic_block;
+
+ rtl_profile_for_bb (this_basic_block);
for (insn = BB_HEAD (this_basic_block);
insn != NEXT_INSN (BB_END (this_basic_block));
insn = next ? next : NEXT_INSN (insn))
{
next = 0;
- if (INSN_P (insn))
+ if (NONDEBUG_INSN_P (insn))
{
/* See if we know about function return values before this
insn based upon SUBREG flags. */
- check_conversions (insn, PATTERN (insn));
+ check_promoted_subreg (insn, PATTERN (insn));
+
+ /* See if we can find hardregs and subreg of pseudos in
+ narrower modes. This could help turning TRUNCATEs
+ into SUBREGs. */
+ note_uses (&PATTERN (insn), record_truncated_values, NULL);
/* Try this insn with each insn it links back to. */
retry:
;
}
- else if (LABEL_P (insn))
- label_tick_ebb_start = label_tick;
}
}
+ default_rtl_profile ();
clear_log_links ();
clear_bb_flags ();
new_direct_jump_p |= purge_all_dead_edges ();
/* Clean up. */
free (uid_log_links);
free (uid_insn_cost);
- free (reg_stat);
+ VEC_free (reg_stat_type, heap, reg_stat);
{
struct undo *undo, *next;
init_reg_last (void)
{
unsigned int i;
- for (i = 0; i < combine_max_regno; i++)
- memset (reg_stat + i, 0, offsetof (struct reg_stat, sign_bit_copies));
+ reg_stat_type *p;
+
+ for (i = 0; VEC_iterate (reg_stat_type, reg_stat, i, p); ++i)
+ memset (p, 0, offsetof (reg_stat_type, sign_bit_copies));
}
\f
/* Set up any promoted values for incoming argument registers. */
setup_incoming_promotions (rtx first)
{
tree arg;
-
- if (!targetm.calls.promote_function_args (TREE_TYPE (cfun->decl)))
- return;
+ bool strictly_local = false;
for (arg = DECL_ARGUMENTS (current_function_decl); arg;
arg = TREE_CHAIN (arg))
{
- rtx reg = DECL_INCOMING_RTL (arg);
+ rtx x, reg = DECL_INCOMING_RTL (arg);
+ int uns1, uns3;
+ enum machine_mode mode1, mode2, mode3, mode4;
+ /* Only continue if the incoming argument is in a register. */
if (!REG_P (reg))
continue;
- if (TYPE_MODE (DECL_ARG_TYPE (arg)) == TYPE_MODE (TREE_TYPE (arg)))
- {
- enum machine_mode mode = TYPE_MODE (TREE_TYPE (arg));
- int uns = TYPE_UNSIGNED (TREE_TYPE (arg));
+ /* Determine, if possible, whether all call sites of the current
+ function lie within the current compilation unit. (This does
+ take into account the exporting of a function via taking its
+ address, and so forth.) */
+ strictly_local = cgraph_local_info (current_function_decl)->local;
+
+ /* The mode and signedness of the argument before any promotions happen
+ (equal to the mode of the pseudo holding it at that stage). */
+ mode1 = TYPE_MODE (TREE_TYPE (arg));
+ uns1 = TYPE_UNSIGNED (TREE_TYPE (arg));
+
+ /* The mode and signedness of the argument after any source language and
+ TARGET_PROMOTE_PROTOTYPES-driven promotions. */
+ mode2 = TYPE_MODE (DECL_ARG_TYPE (arg));
+ uns3 = TYPE_UNSIGNED (DECL_ARG_TYPE (arg));
+
+ /* The mode and signedness of the argument as it is actually passed,
+ after any TARGET_PROMOTE_FUNCTION_ARGS-driven ABI promotions. */
+ mode3 = promote_function_mode (DECL_ARG_TYPE (arg), mode2, &uns3,
+ TREE_TYPE (cfun->decl), 0);
+
+ /* The mode of the register in which the argument is being passed. */
+ mode4 = GET_MODE (reg);
+
+ /* Eliminate sign extensions in the callee when:
+ (a) A mode promotion has occurred; */
+ if (mode1 == mode3)
+ continue;
+ /* (b) The mode of the register is the same as the mode of
+ the argument as it is passed; */
+ if (mode3 != mode4)
+ continue;
+ /* (c) There's no language level extension; */
+ if (mode1 == mode2)
+ ;
+ /* (c.1) All callers are from the current compilation unit. If that's
+ the case we don't have to rely on an ABI, we only have to know
+ what we're generating right now, and we know that we will do the
+ mode1 to mode2 promotion with the given sign. */
+ else if (!strictly_local)
+ continue;
+ /* (c.2) The combination of the two promotions is useful. This is
+ true when the signs match, or if the first promotion is unsigned.
+ In the later case, (sign_extend (zero_extend x)) is the same as
+ (zero_extend (zero_extend x)), so make sure to force UNS3 true. */
+ else if (uns1)
+ uns3 = true;
+ else if (uns3)
+ continue;
- mode = promote_mode (TREE_TYPE (arg), mode, &uns, 1);
- if (mode == GET_MODE (reg) && mode != DECL_MODE (arg))
- {
- rtx x;
- x = gen_rtx_CLOBBER (DECL_MODE (arg), const0_rtx);
- x = gen_rtx_fmt_e ((uns ? ZERO_EXTEND : SIGN_EXTEND), mode, x);
- record_value_for_reg (reg, first, x);
- }
- }
+ /* Record that the value was promoted from mode1 to mode3,
+ so that any sign extension at the head of the current
+ function may be eliminated. */
+ x = gen_rtx_CLOBBER (mode1, const0_rtx);
+ x = gen_rtx_fmt_e ((uns3 ? ZERO_EXTEND : SIGN_EXTEND), mode3, x);
+ record_value_for_reg (reg, first, x);
}
}
-\f
+
/* Called via note_stores. If X is a pseudo that is narrower than
HOST_BITS_PER_WIDE_INT and is being set, record what bits are known zero.
by any set of X. */
static void
-set_nonzero_bits_and_sign_copies (rtx x, rtx set, void *data)
+set_nonzero_bits_and_sign_copies (rtx x, const_rtx set, void *data)
{
rtx insn = (rtx) data;
unsigned int num;
(DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), REGNO (x))
&& GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT)
{
+ reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
+
if (set == 0 || GET_CODE (set) == CLOBBER)
{
- reg_stat[REGNO (x)].nonzero_bits = GET_MODE_MASK (GET_MODE (x));
- reg_stat[REGNO (x)].sign_bit_copies = 1;
+ rsp->nonzero_bits = GET_MODE_MASK (GET_MODE (x));
+ rsp->sign_bit_copies = 1;
return;
}
}
if (!link)
{
- reg_stat[REGNO (x)].nonzero_bits = GET_MODE_MASK (GET_MODE (x));
- reg_stat[REGNO (x)].sign_bit_copies = 1;
+ rsp->nonzero_bits = GET_MODE_MASK (GET_MODE (x));
+ rsp->sign_bit_copies = 1;
return;
}
}
instead of this kludge. */
if (GET_MODE_BITSIZE (GET_MODE (x)) < BITS_PER_WORD
- && GET_CODE (src) == CONST_INT
+ && CONST_INT_P (src)
&& INTVAL (src) > 0
&& 0 != (INTVAL (src)
& ((HOST_WIDE_INT) 1
#endif
/* Don't call nonzero_bits if it cannot change anything. */
- if (reg_stat[REGNO (x)].nonzero_bits != ~(unsigned HOST_WIDE_INT) 0)
- reg_stat[REGNO (x)].nonzero_bits
- |= nonzero_bits (src, nonzero_bits_mode);
+ if (rsp->nonzero_bits != ~(unsigned HOST_WIDE_INT) 0)
+ rsp->nonzero_bits |= nonzero_bits (src, nonzero_bits_mode);
num = num_sign_bit_copies (SET_SRC (set), GET_MODE (x));
- if (reg_stat[REGNO (x)].sign_bit_copies == 0
- || reg_stat[REGNO (x)].sign_bit_copies > num)
- reg_stat[REGNO (x)].sign_bit_copies = num;
+ if (rsp->sign_bit_copies == 0
+ || rsp->sign_bit_copies > num)
+ rsp->sign_bit_copies = num;
}
else
{
- reg_stat[REGNO (x)].nonzero_bits = GET_MODE_MASK (GET_MODE (x));
- reg_stat[REGNO (x)].sign_bit_copies = 1;
+ rsp->nonzero_bits = GET_MODE_MASK (GET_MODE (x));
+ rsp->sign_bit_copies = 1;
}
}
}
rtx *pdest, rtx *psrc)
{
int i;
- rtx set = 0, src, dest;
+ const_rtx set = 0;
+ rtx src, dest;
rtx p;
#ifdef AUTO_INC_DEC
rtx link;
for (i = 0; i < XVECLEN (PATTERN (insn), 0); i++)
{
rtx elt = XVECEXP (PATTERN (insn), 0, i);
- rtx note;
switch (GET_CODE (elt))
{
/* Ignore SETs whose result isn't used but not those that
have side-effects. */
if (find_reg_note (insn, REG_UNUSED, SET_DEST (elt))
- && (!(note = find_reg_note (insn, REG_EH_REGION, NULL_RTX))
- || INTVAL (XEXP (note, 0)) <= 0)
- && ! side_effects_p (elt))
+ && insn_nothrow_p (insn)
+ && !side_effects_p (elt))
break;
/* If we have already found a SET, this is a second one and
/* Don't eliminate a store in the stack pointer. */
if (dest == stack_pointer_rtx
/* Don't combine with an insn that sets a register to itself if it has
- a REG_EQUAL note. This may be part of a REG_NO_CONFLICT sequence. */
+ a REG_EQUAL note. This may be part of a LIBCALL sequence. */
|| (rtx_equal_p (src, dest) && find_reg_note (insn, REG_EQUAL, NULL_RTX))
/* Can't merge an ASM_OPERANDS. */
|| GET_CODE (src) == ASM_OPERANDS
|| (succ && FIND_REG_INC_NOTE (succ, dest))
/* Don't substitute into a non-local goto, this confuses CFG. */
|| (JUMP_P (i3) && find_reg_note (i3, REG_NON_LOCAL_GOTO, NULL_RTX))
-#if 0
- /* Don't combine the end of a libcall into anything. */
- /* ??? This gives worse code, and appears to be unnecessary, since no
- pass after flow uses REG_LIBCALL/REG_RETVAL notes. Local-alloc does
- use REG_RETVAL notes for noconflict blocks, but other code here
- makes sure that those insns don't disappear. */
- || find_reg_note (insn, REG_RETVAL, NULL_RTX)
-#endif
/* Make sure that DEST is not used after SUCC but before I3. */
|| (succ && ! all_adjacent
&& reg_used_between_p (dest, succ, i3))
&& use_crosses_set_p (src, DF_INSN_LUID (insn)))
|| (GET_CODE (src) == ASM_OPERANDS && MEM_VOLATILE_P (src))
|| GET_CODE (src) == UNSPEC_VOLATILE))
- /* If there is a REG_NO_CONFLICT note for DEST in I3 or SUCC, we get
- better register allocation by not doing the combine. */
- || find_reg_note (i3, REG_NO_CONFLICT, dest)
- || (succ && find_reg_note (succ, REG_NO_CONFLICT, dest))
/* Don't combine across a CALL_INSN, because that would possibly
change whether the life span of some REGs crosses calls or not,
and it is a pain to update that information.
Exception: if source is a constant, moving it later can't hurt.
- Accept that special case, because it helps -fforce-addr a lot. */
+ Accept that as a special case. */
|| (DF_INSN_LUID (insn) < last_call_luid && ! CONSTANT_P (src)))
return 0;
return 1;
case MULT:
- return ! (GET_CODE (XEXP (x, 1)) == CONST_INT
+ return ! (CONST_INT_P (XEXP (x, 1))
&& exact_log2 (INTVAL (XEXP (x, 1))) >= 0);
default:
if (BINARY_P (x))
/* Called via note_stores by likely_spilled_retval_p. Remove from info->mask
hard registers that are known to be written to / clobbered in full. */
static void
-likely_spilled_retval_1 (rtx x, rtx set, void *data)
+likely_spilled_retval_1 (rtx x, const_rtx set, void *data)
{
- struct likely_spilled_retval_info *info = data;
+ struct likely_spilled_retval_info *const info =
+ (struct likely_spilled_retval_info *) data;
unsigned regno, nregs;
unsigned new_mask;
unsigned regno, nregs;
/* We assume here that no machine mode needs more than
32 hard registers when the value overlaps with a register
- for which FUNCTION_VALUE_REGNO_P is true. */
+ for which TARGET_FUNCTION_VALUE_REGNO_P is true. */
unsigned mask;
struct likely_spilled_retval_info info;
if (!NONJUMP_INSN_P (use) || GET_CODE (PATTERN (use)) != USE || insn == use)
return 0;
reg = XEXP (PATTERN (use), 0);
- if (!REG_P (reg) || !FUNCTION_VALUE_REGNO_P (REGNO (reg)))
+ if (!REG_P (reg) || !targetm.calls.function_value_regno_p (REGNO (reg)))
return 0;
regno = REGNO (reg);
nregs = hard_regno_nregs[regno][GET_MODE (reg)];
&& GET_MODE_CLASS (GET_MODE (x)) == MODE_INT;
}
+#ifdef AUTO_INC_DEC
+/* Replace auto-increment addressing modes with explicit operations to
+ access the same addresses without modifying the corresponding
+ registers. If AFTER holds, SRC is meant to be reused after the
+ side effect, otherwise it is to be reused before that. */
+
+static rtx
+cleanup_auto_inc_dec (rtx src, bool after, enum machine_mode mem_mode)
+{
+ rtx x = src;
+ const RTX_CODE code = GET_CODE (x);
+ int i;
+ const char *fmt;
+
+ switch (code)
+ {
+ case REG:
+ case CONST_INT:
+ case CONST_DOUBLE:
+ case CONST_FIXED:
+ case CONST_VECTOR:
+ case SYMBOL_REF:
+ case CODE_LABEL:
+ case PC:
+ case CC0:
+ case SCRATCH:
+ /* SCRATCH must be shared because they represent distinct values. */
+ return x;
+ case CLOBBER:
+ if (REG_P (XEXP (x, 0)) && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)
+ return x;
+ break;
+
+ case CONST:
+ if (shared_const_p (x))
+ return x;
+ break;
+
+ case MEM:
+ mem_mode = GET_MODE (x);
+ break;
+
+ case PRE_INC:
+ case PRE_DEC:
+ case POST_INC:
+ case POST_DEC:
+ gcc_assert (mem_mode != VOIDmode && mem_mode != BLKmode);
+ if (after == (code == PRE_INC || code == PRE_DEC))
+ x = cleanup_auto_inc_dec (XEXP (x, 0), after, mem_mode);
+ else
+ x = gen_rtx_PLUS (GET_MODE (x),
+ cleanup_auto_inc_dec (XEXP (x, 0), after, mem_mode),
+ GEN_INT ((code == PRE_INC || code == POST_INC)
+ ? GET_MODE_SIZE (mem_mode)
+ : -GET_MODE_SIZE (mem_mode)));
+ return x;
+
+ case PRE_MODIFY:
+ case POST_MODIFY:
+ if (after == (code == PRE_MODIFY))
+ x = XEXP (x, 0);
+ else
+ x = XEXP (x, 1);
+ return cleanup_auto_inc_dec (x, after, mem_mode);
+
+ default:
+ break;
+ }
+
+ /* Copy the various flags, fields, and other information. We assume
+ that all fields need copying, and then clear the fields that should
+ not be copied. That is the sensible default behavior, and forces
+ us to explicitly document why we are *not* copying a flag. */
+ x = shallow_copy_rtx (x);
+
+ /* We do not copy the USED flag, which is used as a mark bit during
+ walks over the RTL. */
+ RTX_FLAG (x, used) = 0;
+
+ /* We do not copy FRAME_RELATED for INSNs. */
+ if (INSN_P (x))
+ RTX_FLAG (x, frame_related) = 0;
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (fmt[i] == 'e')
+ XEXP (x, i) = cleanup_auto_inc_dec (XEXP (x, i), after, mem_mode);
+ else if (fmt[i] == 'E' || fmt[i] == 'V')
+ {
+ int j;
+ XVEC (x, i) = rtvec_alloc (XVECLEN (x, i));
+ for (j = 0; j < XVECLEN (x, i); j++)
+ XVECEXP (x, i, j)
+ = cleanup_auto_inc_dec (XVECEXP (src, i, j), after, mem_mode);
+ }
+
+ return x;
+}
+#endif
+
+/* Auxiliary data structure for propagate_for_debug_stmt. */
+
+struct rtx_subst_pair
+{
+ rtx to;
+ bool adjusted;
+ bool after;
+};
+
+/* DATA points to an rtx_subst_pair. Return the value that should be
+ substituted. */
+
+static rtx
+propagate_for_debug_subst (rtx from, const_rtx old_rtx, void *data)
+{
+ struct rtx_subst_pair *pair = (struct rtx_subst_pair *)data;
+
+ if (!rtx_equal_p (from, old_rtx))
+ return NULL_RTX;
+ if (!pair->adjusted)
+ {
+ pair->adjusted = true;
+#ifdef AUTO_INC_DEC
+ pair->to = cleanup_auto_inc_dec (pair->to, pair->after, VOIDmode);
+#else
+ pair->to = copy_rtx (pair->to);
+#endif
+ pair->to = make_compound_operation (pair->to, SET);
+ return pair->to;
+ }
+ return copy_rtx (pair->to);
+}
+
+/* Replace occurrences of DEST with SRC in DEBUG_INSNs between INSN
+ and LAST. If MOVE holds, debug insns must also be moved past
+ LAST. */
+
+static void
+propagate_for_debug (rtx insn, rtx last, rtx dest, rtx src, bool move)
+{
+ rtx next, move_pos = move ? last : NULL_RTX, loc;
+
+ struct rtx_subst_pair p;
+ p.to = src;
+ p.adjusted = false;
+ p.after = move;
+
+ next = NEXT_INSN (insn);
+ while (next != last)
+ {
+ insn = next;
+ next = NEXT_INSN (insn);
+ if (DEBUG_INSN_P (insn))
+ {
+ loc = simplify_replace_fn_rtx (INSN_VAR_LOCATION_LOC (insn),
+ dest, propagate_for_debug_subst, &p);
+ if (loc == INSN_VAR_LOCATION_LOC (insn))
+ continue;
+ INSN_VAR_LOCATION_LOC (insn) = loc;
+ if (move_pos)
+ {
+ remove_insn (insn);
+ PREV_INSN (insn) = NEXT_INSN (insn) = NULL_RTX;
+ move_pos = emit_debug_insn_after (insn, move_pos);
+ }
+ else
+ df_insn_rescan (insn);
+ }
+ }
+}
+
+/* Delete the unconditional jump INSN and adjust the CFG correspondingly.
+ Note that the INSN should be deleted *after* removing dead edges, so
+ that the kept edge is the fallthrough edge for a (set (pc) (pc))
+ but not for a (set (pc) (label_ref FOO)). */
+
+static void
+update_cfg_for_uncondjump (rtx insn)
+{
+ basic_block bb = BLOCK_FOR_INSN (insn);
+ bool at_end = (BB_END (bb) == insn);
+
+ if (at_end)
+ purge_dead_edges (bb);
+
+ delete_insn (insn);
+ if (at_end && EDGE_COUNT (bb->succs) == 1)
+ single_succ_edge (bb)->flags |= EDGE_FALLTHRU;
+}
+
/* Try to combine the insns I1 and I2 into I3.
Here I1 and I2 appear earlier than I3.
I2 and not in I3, a REG_DEAD note must be made. */
rtx i3dest_killed = 0;
/* SET_DEST and SET_SRC of I2 and I1. */
- rtx i2dest, i2src, i1dest = 0, i1src = 0;
+ rtx i2dest = 0, i2src = 0, i1dest = 0, i1src = 0;
+ /* Set if I2DEST was reused as a scratch register. */
+ bool i2scratch = false;
/* PATTERN (I1) and PATTERN (I2), or a copy of it in certain cases. */
rtx i1pat = 0, i2pat = 0;
/* Indicates if I2DEST or I1DEST is in I2SRC or I1_SRC. */
/* Notes that I1, I2 or I3 is a MULT operation. */
int have_mult = 0;
int swap_i2i3 = 0;
+ int changed_i3_dest = 0;
int maxreg;
rtx temp;
rtx link;
+ rtx other_pat = 0;
+ rtx new_other_notes;
int i;
/* Exit early if one of the insns involved can't be used for
if (cant_combine_insn_p (i3)
|| cant_combine_insn_p (i2)
|| (i1 && cant_combine_insn_p (i1))
- || likely_spilled_retval_p (i3)
- /* We also can't do anything if I3 has a
- REG_LIBCALL note since we don't want to disrupt the contiguity of a
- libcall. */
-#if 0
- /* ??? This gives worse code, and appears to be unnecessary, since no
- pass after flow uses REG_LIBCALL/REG_RETVAL notes. */
- || find_reg_note (i3, REG_LIBCALL, NULL_RTX)
-#endif
- )
+ || likely_spilled_retval_p (i3))
return 0;
combine_attempts++;
/* Reset the hard register usage information. */
CLEAR_HARD_REG_SET (newpat_used_regs);
+ if (dump_file && (dump_flags & TDF_DETAILS))
+ {
+ if (i1)
+ fprintf (dump_file, "\nTrying %d, %d -> %d:\n",
+ INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
+ else
+ fprintf (dump_file, "\nTrying %d -> %d:\n",
+ INSN_UID (i2), INSN_UID (i3));
+ }
+
/* If I1 and I2 both feed I3, they can be in any order. To simplify the
code below, set I1 to be the earlier of the two insns. */
if (i1 && DF_INSN_LUID (i1) > DF_INSN_LUID (i2))
&& GET_CODE (SET_DEST (PATTERN (i3))) != STRICT_LOW_PART
&& ! reg_overlap_mentioned_p (SET_SRC (PATTERN (i3)),
SET_DEST (PATTERN (i3)))
- && next_real_insn (i2) == i3)
+ && next_active_insn (i2) == i3)
{
rtx p2 = PATTERN (i2);
subst_low_luid = DF_INSN_LUID (i2);
added_sets_2 = added_sets_1 = 0;
+ i2src = SET_DEST (PATTERN (i3));
i2dest = SET_SRC (PATTERN (i3));
i2dest_killed = dead_or_set_p (i2, i2dest);
constant. */
if (i1 == 0
&& (temp = single_set (i2)) != 0
- && (GET_CODE (SET_SRC (temp)) == CONST_INT
+ && (CONST_INT_P (SET_SRC (temp))
|| GET_CODE (SET_SRC (temp)) == CONST_DOUBLE)
&& GET_CODE (PATTERN (i3)) == SET
- && (GET_CODE (SET_SRC (PATTERN (i3))) == CONST_INT
+ && (CONST_INT_P (SET_SRC (PATTERN (i3)))
|| GET_CODE (SET_SRC (PATTERN (i3))) == CONST_DOUBLE)
&& reg_subword_p (SET_DEST (PATTERN (i3)), SET_DEST (temp)))
{
if (GET_CODE (dest) == ZERO_EXTRACT)
{
- if (GET_CODE (XEXP (dest, 1)) == CONST_INT
- && GET_CODE (XEXP (dest, 2)) == CONST_INT)
+ if (CONST_INT_P (XEXP (dest, 1))
+ && CONST_INT_P (XEXP (dest, 2)))
{
width = INTVAL (XEXP (dest, 1));
offset = INTVAL (XEXP (dest, 2));
if (offset >= 0
&& (GET_MODE_BITSIZE (GET_MODE (SET_DEST (temp)))
- <= HOST_BITS_PER_WIDE_INT * 2))
+ <= HOST_BITS_PER_DOUBLE_INT))
{
- HOST_WIDE_INT mhi, ohi, ihi;
- HOST_WIDE_INT mlo, olo, ilo;
+ double_int m, o, i;
rtx inner = SET_SRC (PATTERN (i3));
rtx outer = SET_SRC (temp);
- if (GET_CODE (outer) == CONST_INT)
- {
- olo = INTVAL (outer);
- ohi = olo < 0 ? -1 : 0;
- }
- else
- {
- olo = CONST_DOUBLE_LOW (outer);
- ohi = CONST_DOUBLE_HIGH (outer);
- }
-
- if (GET_CODE (inner) == CONST_INT)
- {
- ilo = INTVAL (inner);
- ihi = ilo < 0 ? -1 : 0;
- }
- else
- {
- ilo = CONST_DOUBLE_LOW (inner);
- ihi = CONST_DOUBLE_HIGH (inner);
- }
-
- if (width < HOST_BITS_PER_WIDE_INT)
- {
- mlo = ((unsigned HOST_WIDE_INT) 1 << width) - 1;
- mhi = 0;
- }
- else if (width < HOST_BITS_PER_WIDE_INT * 2)
- {
- mhi = ((unsigned HOST_WIDE_INT) 1
- << (width - HOST_BITS_PER_WIDE_INT)) - 1;
- mlo = -1;
- }
- else
- {
- mlo = -1;
- mhi = -1;
- }
-
- ilo &= mlo;
- ihi &= mhi;
-
- if (offset >= HOST_BITS_PER_WIDE_INT)
- {
- mhi = mlo << (offset - HOST_BITS_PER_WIDE_INT);
- mlo = 0;
- ihi = ilo << (offset - HOST_BITS_PER_WIDE_INT);
- ilo = 0;
- }
- else if (offset > 0)
- {
- mhi = (mhi << offset) | ((unsigned HOST_WIDE_INT) mlo
- >> (HOST_BITS_PER_WIDE_INT - offset));
- mlo = mlo << offset;
- ihi = (ihi << offset) | ((unsigned HOST_WIDE_INT) ilo
- >> (HOST_BITS_PER_WIDE_INT - offset));
- ilo = ilo << offset;
- }
+ o = rtx_to_double_int (outer);
+ i = rtx_to_double_int (inner);
- olo = (olo & ~mlo) | ilo;
- ohi = (ohi & ~mhi) | ihi;
+ m = double_int_mask (width);
+ i = double_int_and (i, m);
+ m = double_int_lshift (m, offset, HOST_BITS_PER_DOUBLE_INT, false);
+ i = double_int_lshift (i, offset, HOST_BITS_PER_DOUBLE_INT, false);
+ o = double_int_ior (double_int_and (o, double_int_not (m)), i);
combine_merges++;
subst_insn = i3;
i2dest = SET_DEST (temp);
i2dest_killed = dead_or_set_p (i2, i2dest);
+ /* Replace the source in I2 with the new constant and make the
+ resulting insn the new pattern for I3. Then skip to where we
+ validate the pattern. Everything was set up above. */
SUBST (SET_SRC (temp),
- immed_double_const (olo, ohi, GET_MODE (SET_DEST (temp))));
+ immed_double_int_const (o, GET_MODE (SET_DEST (temp))));
newpat = PATTERN (i2);
+
+ /* The dest of I3 has been replaced with the dest of I2. */
+ changed_i3_dest = 1;
goto validate_replacement;
}
}
if (i1 && GET_CODE (newpat) != CLOBBER)
{
- /* Before we can do this substitution, we must redo the test done
- above (see detailed comments there) that ensures that I1DEST
- isn't mentioned in any SETs in NEWPAT that are field assignments. */
-
- if (! combinable_i3pat (NULL_RTX, &newpat, i1dest, NULL_RTX,
- 0, (rtx*) 0))
+ /* Check that an autoincrement side-effect on I1 has not been lost.
+ This happens if I1DEST is mentioned in I2 and dies there, and
+ has disappeared from the new pattern. */
+ if ((FIND_REG_INC_NOTE (i1, NULL_RTX) != 0
+ && !i1_feeds_i3
+ && dead_or_set_p (i2, i1dest)
+ && !reg_overlap_mentioned_p (i1dest, newpat))
+ /* Before we can do this substitution, we must redo the test done
+ above (see detailed comments there) that ensures that I1DEST
+ isn't mentioned in any SETs in NEWPAT that are field assignments. */
+ || !combinable_i3pat (NULL_RTX, &newpat, i1dest, NULL_RTX, 0, 0))
{
undo_all ();
return 0;
}
}
- /* We come here when we are replacing a destination in I2 with the
- destination of I3. */
validate_replacement:
/* Note which hard regs this insn has as inputs. */
{
rtx set0 = XVECEXP (newpat, 0, 0);
rtx set1 = XVECEXP (newpat, 0, 1);
- rtx note;
if (((REG_P (SET_DEST (set1))
&& find_reg_note (i3, REG_UNUSED, SET_DEST (set1)))
|| (GET_CODE (SET_DEST (set1)) == SUBREG
&& find_reg_note (i3, REG_UNUSED, SUBREG_REG (SET_DEST (set1)))))
- && (!(note = find_reg_note (i3, REG_EH_REGION, NULL_RTX))
- || INTVAL (XEXP (note, 0)) <= 0)
- && ! side_effects_p (SET_SRC (set1)))
+ && insn_nothrow_p (i3)
+ && !side_effects_p (SET_SRC (set1)))
{
newpat = set0;
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
|| (GET_CODE (SET_DEST (set0)) == SUBREG
&& find_reg_note (i3, REG_UNUSED,
SUBREG_REG (SET_DEST (set0)))))
- && (!(note = find_reg_note (i3, REG_EH_REGION, NULL_RTX))
- || INTVAL (XEXP (note, 0)) <= 0)
- && ! side_effects_p (SET_SRC (set0)))
+ && insn_nothrow_p (i3)
+ && !side_effects_p (SET_SRC (set0)))
{
newpat = set1;
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
if (insn_code_number >= 0)
- {
- /* If we will be able to accept this, we have made a
- change to the destination of I3. This requires us to
- do a few adjustments. */
-
- PATTERN (i3) = newpat;
- adjust_for_new_dest (i3);
- }
+ changed_i3_dest = 1;
}
}
if (i1 && insn_code_number < 0 && GET_CODE (newpat) == SET
&& asm_noperands (newpat) < 0)
{
- rtx m_split, *split;
+ rtx parallel, m_split, *split;
/* See if the MD file can split NEWPAT. If it can't, see if letting it
use I2DEST as a scratch register will help. In the latter case,
convert I2DEST to the mode of the source of NEWPAT if we can. */
- m_split = split_insns (newpat, i3);
+ m_split = combine_split_insns (newpat, i3);
/* We can only use I2DEST as a scratch reg if it doesn't overlap any
inputs of NEWPAT. */
/* First try to split using the original register as a
scratch register. */
- m_split = split_insns (gen_rtx_PARALLEL
- (VOIDmode,
- gen_rtvec (2, newpat,
- gen_rtx_CLOBBER (VOIDmode,
- i2dest))),
- i3);
+ parallel = gen_rtx_PARALLEL (VOIDmode,
+ gen_rtvec (2, newpat,
+ gen_rtx_CLOBBER (VOIDmode,
+ i2dest)));
+ m_split = combine_split_insns (parallel, i3);
/* If that didn't work, try changing the mode of I2DEST if
we can. */
ni2dest = regno_reg_rtx[REGNO (i2dest)];
}
- m_split = split_insns (gen_rtx_PARALLEL
- (VOIDmode,
- gen_rtvec (2, newpat,
- gen_rtx_CLOBBER (VOIDmode,
- ni2dest))),
- i3);
+ parallel = (gen_rtx_PARALLEL
+ (VOIDmode,
+ gen_rtvec (2, newpat,
+ gen_rtx_CLOBBER (VOIDmode,
+ ni2dest))));
+ m_split = combine_split_insns (parallel, i3);
if (m_split == 0
&& REGNO (i2dest) >= FIRST_PSEUDO_REGISTER)
{
struct undo *buf;
- PUT_MODE (regno_reg_rtx[REGNO (i2dest)], old_mode);
+ adjust_reg_mode (regno_reg_rtx[REGNO (i2dest)], old_mode);
buf = undobuf.undos;
undobuf.undos = buf->next;
buf->next = undobuf.frees;
undobuf.frees = buf;
}
}
+
+ i2scratch = m_split != 0;
}
/* If recog_for_combine has discarded clobbers, try to use them
again for the split. */
if (m_split == 0 && newpat_vec_with_clobbers)
- m_split
- = split_insns (gen_rtx_PARALLEL (VOIDmode,
- newpat_vec_with_clobbers), i3);
+ {
+ parallel = gen_rtx_PARALLEL (VOIDmode, newpat_vec_with_clobbers);
+ m_split = combine_split_insns (parallel, i3);
+ }
if (m_split && NEXT_INSN (m_split) == NULL_RTX)
{
/* If we can split it and use I2DEST, go ahead and see if that
helps things be recognized. Verify that none of the registers
are set between I2 and I3. */
- if (insn_code_number < 0 && (split = find_split_point (&newpat, i3)) != 0
+ if (insn_code_number < 0
+ && (split = find_split_point (&newpat, i3, false)) != 0
#ifdef HAVE_cc0
&& REG_P (i2dest)
#endif
bool subst_done = false;
newi2pat = NULL_RTX;
+ i2scratch = true;
+
+ /* *SPLIT may be part of I2SRC, so make sure we have the
+ original expression around for later debug processing.
+ We should not need I2SRC any more in other cases. */
+ if (MAY_HAVE_DEBUG_INSNS)
+ i2src = copy_rtx (i2src);
+ else
+ i2src = NULL;
+
/* Get NEWDEST as a register in the proper mode. We have already
validated that we can do this. */
if (GET_MODE (i2dest) != split_mode && split_mode != VOIDmode)
an ASHIFT. This can occur if it was inside a PLUS and hence
appeared to be a memory address. This is a kludge. */
if (split_code == MULT
- && GET_CODE (XEXP (*split, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (*split, 1))
&& INTVAL (XEXP (*split, 1)) > 0
&& (i = exact_log2 (INTVAL (XEXP (*split, 1)))) >= 0)
{
&& GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) != STRICT_LOW_PART
&& ! (temp = SET_DEST (XVECEXP (newpat, 0, 1)),
(REG_P (temp)
- && reg_stat[REGNO (temp)].nonzero_bits != 0
+ && VEC_index (reg_stat_type, reg_stat,
+ REGNO (temp))->nonzero_bits != 0
&& GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
&& GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
- && (reg_stat[REGNO (temp)].nonzero_bits
+ && (VEC_index (reg_stat_type, reg_stat,
+ REGNO (temp))->nonzero_bits
!= GET_MODE_MASK (word_mode))))
&& ! (GET_CODE (SET_DEST (XVECEXP (newpat, 0, 1))) == SUBREG
&& (temp = SUBREG_REG (SET_DEST (XVECEXP (newpat, 0, 1))),
(REG_P (temp)
- && reg_stat[REGNO (temp)].nonzero_bits != 0
+ && VEC_index (reg_stat_type, reg_stat,
+ REGNO (temp))->nonzero_bits != 0
&& GET_MODE_BITSIZE (GET_MODE (temp)) < BITS_PER_WORD
&& GET_MODE_BITSIZE (GET_MODE (temp)) < HOST_BITS_PER_INT
- && (reg_stat[REGNO (temp)].nonzero_bits
+ && (VEC_index (reg_stat_type, reg_stat,
+ REGNO (temp))->nonzero_bits
!= GET_MODE_MASK (word_mode)))))
&& ! reg_overlap_mentioned_p (SET_DEST (XVECEXP (newpat, 0, 1)),
SET_SRC (XVECEXP (newpat, 0, 1)))
/* If we had to change another insn, make sure it is valid also. */
if (undobuf.other_insn)
{
- rtx other_pat = PATTERN (undobuf.other_insn);
- rtx new_other_notes;
- rtx note, next;
-
CLEAR_HARD_REG_SET (newpat_used_regs);
+ other_pat = PATTERN (undobuf.other_insn);
other_code_number = recog_for_combine (&other_pat, undobuf.other_insn,
&new_other_notes);
undo_all ();
return 0;
}
-
- PATTERN (undobuf.other_insn) = other_pat;
-
- /* If any of the notes in OTHER_INSN were REG_UNUSED, ensure that they
- are still valid. Then add any non-duplicate notes added by
- recog_for_combine. */
- for (note = REG_NOTES (undobuf.other_insn); note; note = next)
- {
- next = XEXP (note, 1);
-
- if (REG_NOTE_KIND (note) == REG_UNUSED
- && ! reg_set_p (XEXP (note, 0), PATTERN (undobuf.other_insn)))
- remove_note (undobuf.other_insn, note);
- }
-
- distribute_notes (new_other_notes, undobuf.other_insn,
- undobuf.other_insn, NULL_RTX, NULL_RTX, NULL_RTX);
}
+
#ifdef HAVE_cc0
/* If I2 is the CC0 setter and I3 is the CC0 user then check whether
they are adjacent to each other or not. */
/* Only allow this combination if insn_rtx_costs reports that the
replacement instructions are cheaper than the originals. */
- if (!combine_validate_cost (i1, i2, i3, newpat, newi2pat))
+ if (!combine_validate_cost (i1, i2, i3, newpat, newi2pat, other_pat))
{
undo_all ();
return 0;
}
+ if (MAY_HAVE_DEBUG_INSNS)
+ {
+ struct undo *undo;
+
+ for (undo = undobuf.undos; undo; undo = undo->next)
+ if (undo->kind == UNDO_MODE)
+ {
+ rtx reg = *undo->where.r;
+ enum machine_mode new_mode = GET_MODE (reg);
+ enum machine_mode old_mode = undo->old_contents.m;
+
+ /* Temporarily revert mode back. */
+ adjust_reg_mode (reg, old_mode);
+
+ if (reg == i2dest && i2scratch)
+ {
+ /* If we used i2dest as a scratch register with a
+ different mode, substitute it for the original
+ i2src while its original mode is temporarily
+ restored, and then clear i2scratch so that we don't
+ do it again later. */
+ propagate_for_debug (i2, i3, reg, i2src, false);
+ i2scratch = false;
+ /* Put back the new mode. */
+ adjust_reg_mode (reg, new_mode);
+ }
+ else
+ {
+ rtx tempreg = gen_raw_REG (old_mode, REGNO (reg));
+ rtx first, last;
+
+ if (reg == i2dest)
+ {
+ first = i2;
+ last = i3;
+ }
+ else
+ {
+ first = i3;
+ last = undobuf.other_insn;
+ gcc_assert (last);
+ }
+
+ /* We're dealing with a reg that changed mode but not
+ meaning, so we want to turn it into a subreg for
+ the new mode. However, because of REG sharing and
+ because its mode had already changed, we have to do
+ it in two steps. First, replace any debug uses of
+ reg, with its original mode temporarily restored,
+ with this copy we have created; then, replace the
+ copy with the SUBREG of the original shared reg,
+ once again changed to the new mode. */
+ propagate_for_debug (first, last, reg, tempreg, false);
+ adjust_reg_mode (reg, new_mode);
+ propagate_for_debug (first, last, tempreg,
+ lowpart_subreg (old_mode, reg, new_mode),
+ false);
+ }
+ }
+ }
+
+ /* If we will be able to accept this, we have made a
+ change to the destination of I3. This requires us to
+ do a few adjustments. */
+
+ if (changed_i3_dest)
+ {
+ PATTERN (i3) = newpat;
+ adjust_for_new_dest (i3);
+ }
+
/* We now know that we can do this combination. Merge the insns and
update the status of registers and LOG_LINKS. */
+ if (undobuf.other_insn)
+ {
+ rtx note, next;
+
+ PATTERN (undobuf.other_insn) = other_pat;
+
+ /* If any of the notes in OTHER_INSN were REG_UNUSED, ensure that they
+ are still valid. Then add any non-duplicate notes added by
+ recog_for_combine. */
+ for (note = REG_NOTES (undobuf.other_insn); note; note = next)
+ {
+ next = XEXP (note, 1);
+
+ if (REG_NOTE_KIND (note) == REG_UNUSED
+ && ! reg_set_p (XEXP (note, 0), PATTERN (undobuf.other_insn)))
+ remove_note (undobuf.other_insn, note);
+ }
+
+ distribute_notes (new_other_notes, undobuf.other_insn,
+ undobuf.other_insn, NULL_RTX, NULL_RTX, NULL_RTX);
+ }
+
if (swap_i2i3)
{
rtx insn;
call_usage = copy_rtx (call_usage);
if (substed_i2)
- replace_rtx (call_usage, i2dest, i2src);
+ {
+ /* I2SRC must still be meaningful at this point. Some splitting
+ operations can invalidate I2SRC, but those operations do not
+ apply to calls. */
+ gcc_assert (i2src);
+ replace_rtx (call_usage, i2dest, i2src);
+ }
if (substed_i1)
replace_rtx (call_usage, i1dest, i1src);
if (newi2pat)
{
+ if (MAY_HAVE_DEBUG_INSNS && i2scratch)
+ propagate_for_debug (i2, i3, i2dest, i2src, false);
INSN_CODE (i2) = i2_code_number;
PATTERN (i2) = newi2pat;
}
else
- SET_INSN_DELETED (i2);
+ {
+ if (MAY_HAVE_DEBUG_INSNS && i2src)
+ propagate_for_debug (i2, i3, i2dest, i2src, i3_subst_into_i2);
+ SET_INSN_DELETED (i2);
+ }
if (i1)
{
LOG_LINKS (i1) = 0;
REG_NOTES (i1) = 0;
+ if (MAY_HAVE_DEBUG_INSNS)
+ propagate_for_debug (i1, i3, i1dest, i1src, false);
SET_INSN_DELETED (i1);
}
if (newi2pat && new_i2_notes)
distribute_notes (new_i2_notes, i2, i2, NULL_RTX, NULL_RTX, NULL_RTX);
-
+
if (new_i3_notes)
distribute_notes (new_i3_notes, i3, i3, NULL_RTX, NULL_RTX, NULL_RTX);
if (i3dest_killed)
{
if (newi2pat && reg_set_p (i3dest_killed, newi2pat))
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i3dest_killed,
- NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i3dest_killed,
+ NULL_RTX),
NULL_RTX, i2, NULL_RTX, elim_i2, elim_i1);
else
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i3dest_killed,
- NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i3dest_killed,
+ NULL_RTX),
NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
elim_i2, elim_i1);
}
if (i2dest_in_i2src)
{
if (newi2pat && reg_set_p (i2dest, newi2pat))
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i2dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i2dest, NULL_RTX),
NULL_RTX, i2, NULL_RTX, NULL_RTX, NULL_RTX);
else
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i2dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i2dest, NULL_RTX),
NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
NULL_RTX, NULL_RTX);
}
if (i1dest_in_i1src)
{
if (newi2pat && reg_set_p (i1dest, newi2pat))
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i1dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i1dest, NULL_RTX),
NULL_RTX, i2, NULL_RTX, NULL_RTX, NULL_RTX);
else
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i1dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i1dest, NULL_RTX),
NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
NULL_RTX, NULL_RTX);
}
if (newi2pat)
note_stores (newi2pat, set_nonzero_bits_and_sign_copies, NULL);
note_stores (newpat, set_nonzero_bits_and_sign_copies, NULL);
-
- /* Set new_direct_jump_p if a new return or simple jump instruction
- has been created.
-
- If I3 is now an unconditional jump, ensure that it has a
- BARRIER following it since it may have initially been a
- conditional jump. It may also be the last nonnote insn. */
-
- if (returnjump_p (i3) || any_uncondjump_p (i3))
- {
- *new_direct_jump_p = 1;
- mark_jump_label (PATTERN (i3), i3, 0);
-
- if ((temp = next_nonnote_insn (i3)) == NULL_RTX
- || !BARRIER_P (temp))
- emit_barrier_after (i3);
- }
-
- if (undobuf.other_insn != NULL_RTX
- && (returnjump_p (undobuf.other_insn)
- || any_uncondjump_p (undobuf.other_insn)))
- {
- *new_direct_jump_p = 1;
-
- if ((temp = next_nonnote_insn (undobuf.other_insn)) == NULL_RTX
- || !BARRIER_P (temp))
- emit_barrier_after (undobuf.other_insn);
- }
-
- /* An NOOP jump does not need barrier, but it does need cleaning up
- of CFG. */
- if (GET_CODE (newpat) == SET
- && SET_SRC (newpat) == pc_rtx
- && SET_DEST (newpat) == pc_rtx)
- *new_direct_jump_p = 1;
}
-
+
if (undobuf.other_insn != NULL_RTX)
{
if (dump_file)
}
df_insn_rescan (i3);
}
-
+
+ /* Set new_direct_jump_p if a new return or simple jump instruction
+ has been created. Adjust the CFG accordingly. */
+
+ if (returnjump_p (i3) || any_uncondjump_p (i3))
+ {
+ *new_direct_jump_p = 1;
+ mark_jump_label (PATTERN (i3), i3, 0);
+ update_cfg_for_uncondjump (i3);
+ }
+
+ if (undobuf.other_insn != NULL_RTX
+ && (returnjump_p (undobuf.other_insn)
+ || any_uncondjump_p (undobuf.other_insn)))
+ {
+ *new_direct_jump_p = 1;
+ update_cfg_for_uncondjump (undobuf.other_insn);
+ }
+
+ /* A noop might also need cleaning up of CFG, if it comes from the
+ simplification of a jump. */
+ if (GET_CODE (newpat) == SET
+ && SET_SRC (newpat) == pc_rtx
+ && SET_DEST (newpat) == pc_rtx)
+ {
+ *new_direct_jump_p = 1;
+ update_cfg_for_uncondjump (i3);
+ }
+
combine_successes++;
undo_commit ();
*undo->where.i = undo->old_contents.i;
break;
case UNDO_MODE:
- PUT_MODE (*undo->where.r, undo->old_contents.m);
+ adjust_reg_mode (*undo->where.r, undo->old_contents.m);
break;
default:
gcc_unreachable ();
two insns. */
static rtx *
-find_split_point (rtx *loc, rtx insn)
+find_split_point (rtx *loc, rtx insn, bool set_src)
{
rtx x = *loc;
enum rtx_code code = GET_CODE (x);
if (MEM_P (SUBREG_REG (x)))
return loc;
#endif
- return find_split_point (&SUBREG_REG (x), insn);
+ return find_split_point (&SUBREG_REG (x), insn, false);
case MEM:
#ifdef HAVE_lo_sum
if (GET_CODE (XEXP (x, 0)) == CONST
|| GET_CODE (XEXP (x, 0)) == SYMBOL_REF)
{
+ enum machine_mode address_mode
+ = targetm.addr_space.address_mode (MEM_ADDR_SPACE (x));
+
SUBST (XEXP (x, 0),
- gen_rtx_LO_SUM (Pmode,
- gen_rtx_HIGH (Pmode, XEXP (x, 0)),
+ gen_rtx_LO_SUM (address_mode,
+ gen_rtx_HIGH (address_mode, XEXP (x, 0)),
XEXP (x, 0)));
return &XEXP (XEXP (x, 0), 0);
}
the first pseudo-reg (one of the virtual regs) as a placeholder;
it will not remain in the result. */
if (GET_CODE (XEXP (x, 0)) == PLUS
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
- && ! memory_address_p (GET_MODE (x), XEXP (x, 0)))
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
+ && ! memory_address_addr_space_p (GET_MODE (x), XEXP (x, 0),
+ MEM_ADDR_SPACE (x)))
{
rtx reg = regno_reg_rtx[FIRST_PSEUDO_REGISTER];
- rtx seq = split_insns (gen_rtx_SET (VOIDmode, reg, XEXP (x, 0)),
- subst_insn);
+ rtx seq = combine_split_insns (gen_rtx_SET (VOIDmode, reg,
+ XEXP (x, 0)),
+ subst_insn);
/* This should have produced two insns, each of which sets our
placeholder. If the source of the second is a valid address,
&& NONJUMP_INSN_P (NEXT_INSN (seq))
&& GET_CODE (PATTERN (NEXT_INSN (seq))) == SET
&& SET_DEST (PATTERN (NEXT_INSN (seq))) == reg
- && memory_address_p (GET_MODE (x),
- SET_SRC (PATTERN (NEXT_INSN (seq)))))
+ && memory_address_addr_space_p
+ (GET_MODE (x), SET_SRC (PATTERN (NEXT_INSN (seq))),
+ MEM_ADDR_SPACE (x)))
{
rtx src1 = SET_SRC (PATTERN (seq));
rtx src2 = SET_SRC (PATTERN (NEXT_INSN (seq)));
&& OBJECT_P (SUBREG_REG (XEXP (XEXP (x, 0), 0)))))
return &XEXP (XEXP (x, 0), 0);
}
+
+ /* If we have a PLUS whose first operand is complex, try computing it
+ separately by making a split there. */
+ if (GET_CODE (XEXP (x, 0)) == PLUS
+ && ! memory_address_addr_space_p (GET_MODE (x), XEXP (x, 0),
+ MEM_ADDR_SPACE (x))
+ && ! OBJECT_P (XEXP (XEXP (x, 0), 0))
+ && ! (GET_CODE (XEXP (XEXP (x, 0), 0)) == SUBREG
+ && OBJECT_P (SUBREG_REG (XEXP (XEXP (x, 0), 0)))))
+ return &XEXP (XEXP (x, 0), 0);
break;
case SET:
#endif
/* See if we can split SET_SRC as it stands. */
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
/* See if we can split SET_DEST as it stands. */
- split = find_split_point (&SET_DEST (x), insn);
+ split = find_split_point (&SET_DEST (x), insn, false);
if (split && split != &SET_DEST (x))
return split;
if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
&& (GET_MODE_BITSIZE (GET_MODE (XEXP (SET_DEST (x), 0)))
<= HOST_BITS_PER_WIDE_INT)
- && GET_CODE (XEXP (SET_DEST (x), 1)) == CONST_INT
- && GET_CODE (XEXP (SET_DEST (x), 2)) == CONST_INT
- && GET_CODE (SET_SRC (x)) == CONST_INT
+ && CONST_INT_P (XEXP (SET_DEST (x), 1))
+ && CONST_INT_P (XEXP (SET_DEST (x), 2))
+ && CONST_INT_P (SET_SRC (x))
&& ((INTVAL (XEXP (SET_DEST (x), 1))
+ INTVAL (XEXP (SET_DEST (x), 2)))
<= GET_MODE_BITSIZE (GET_MODE (XEXP (SET_DEST (x), 0))))
SUBST (SET_DEST (x), dest);
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
this is no worse, but if it took more than one insn, it will
be better. */
- if (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (SET_SRC (x), 1))
&& REG_P (XEXP (SET_SRC (x), 0))
&& (pos = exact_log2 (INTVAL (XEXP (SET_SRC (x), 1)))) >= 7
&& REG_P (SET_DEST (x))
if (extraction != 0)
{
SUBST (SET_SRC (x), extraction);
- return find_split_point (loc, insn);
+ return find_split_point (loc, insn, false);
}
}
break;
XEXP (SET_SRC (x), 0),
GEN_INT (pos))));
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
case SIGN_EXTRACT:
case ZERO_EXTRACT:
- if (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
- && GET_CODE (XEXP (SET_SRC (x), 2)) == CONST_INT)
+ if (CONST_INT_P (XEXP (SET_SRC (x), 1))
+ && CONST_INT_P (XEXP (SET_SRC (x), 2)))
{
inner = XEXP (SET_SRC (x), 0);
len = INTVAL (XEXP (SET_SRC (x), 1));
GEN_INT (pos)),
GEN_INT (((HOST_WIDE_INT) 1 << len) - 1)));
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
- len - pos)),
GEN_INT (GET_MODE_BITSIZE (mode) - len)));
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
GET_MODE (x),
XEXP (XEXP (x, 0), 0),
XEXP (XEXP (x, 1), 0))));
- return find_split_point (loc, insn);
+ return find_split_point (loc, insn, set_src);
}
/* Many RISC machines have a large set of logical insns. If the
}
break;
+ case PLUS:
+ case MINUS:
+ /* Split at a multiply-accumulate instruction. However if this is
+ the SET_SRC, we likely do not have such an instruction and it's
+ worthless to try this split. */
+ if (!set_src && GET_CODE (XEXP (x, 0)) == MULT)
+ return loc;
+
default:
break;
}
{
case RTX_BITFIELD_OPS: /* This is ZERO_EXTRACT and SIGN_EXTRACT. */
case RTX_TERNARY:
- split = find_split_point (&XEXP (x, 2), insn);
+ split = find_split_point (&XEXP (x, 2), insn, false);
if (split)
return split;
/* ... fall through ... */
case RTX_COMM_ARITH:
case RTX_COMPARE:
case RTX_COMM_COMPARE:
- split = find_split_point (&XEXP (x, 1), insn);
+ split = find_split_point (&XEXP (x, 1), insn, false);
if (split)
return split;
/* ... fall through ... */
if (GET_CODE (x) != AND && GET_CODE (XEXP (x, 0)) == AND)
return &XEXP (x, 0);
- split = find_split_point (&XEXP (x, 0), insn);
+ split = find_split_point (&XEXP (x, 0), insn, false);
if (split)
return split;
return loc;
enum machine_mode op0_mode = VOIDmode;
const char *fmt;
int len, i;
- rtx new;
+ rtx new_rtx;
/* Two expressions are equal if they are identical copies of a shared
RTX or if they are both registers with the same register number
&& GET_CODE (XVECEXP (x, 0, 0)) == SET
&& GET_CODE (SET_SRC (XVECEXP (x, 0, 0))) == ASM_OPERANDS)
{
- new = subst (XVECEXP (x, 0, 0), from, to, 0, unique_copy);
+ new_rtx = subst (XVECEXP (x, 0, 0), from, to, 0, unique_copy);
/* If this substitution failed, this whole thing fails. */
- if (GET_CODE (new) == CLOBBER
- && XEXP (new, 0) == const0_rtx)
- return new;
+ if (GET_CODE (new_rtx) == CLOBBER
+ && XEXP (new_rtx, 0) == const0_rtx)
+ return new_rtx;
- SUBST (XVECEXP (x, 0, 0), new);
+ SUBST (XVECEXP (x, 0, 0), new_rtx);
for (i = XVECLEN (x, 0) - 1; i >= 1; i--)
{
&& GET_CODE (dest) != CC0
&& GET_CODE (dest) != PC)
{
- new = subst (dest, from, to, 0, unique_copy);
+ new_rtx = subst (dest, from, to, 0, unique_copy);
/* If this substitution failed, this whole thing fails. */
- if (GET_CODE (new) == CLOBBER
- && XEXP (new, 0) == const0_rtx)
- return new;
+ if (GET_CODE (new_rtx) == CLOBBER
+ && XEXP (new_rtx, 0) == const0_rtx)
+ return new_rtx;
- SUBST (SET_DEST (XVECEXP (x, 0, i)), new);
+ SUBST (SET_DEST (XVECEXP (x, 0, i)), new_rtx);
}
}
}
{
if (COMBINE_RTX_EQUAL_P (XVECEXP (x, i, j), from))
{
- new = (unique_copy && n_occurrences
+ new_rtx = (unique_copy && n_occurrences
? copy_rtx (to) : to);
n_occurrences++;
}
else
{
- new = subst (XVECEXP (x, i, j), from, to, 0,
+ new_rtx = subst (XVECEXP (x, i, j), from, to, 0,
unique_copy);
/* If this substitution failed, this whole thing
fails. */
- if (GET_CODE (new) == CLOBBER
- && XEXP (new, 0) == const0_rtx)
- return new;
+ if (GET_CODE (new_rtx) == CLOBBER
+ && XEXP (new_rtx, 0) == const0_rtx)
+ return new_rtx;
}
- SUBST (XVECEXP (x, i, j), new);
+ SUBST (XVECEXP (x, i, j), new_rtx);
}
}
else if (fmt[i] == 'e')
{
/* If this is a register being set, ignore it. */
- new = XEXP (x, i);
+ new_rtx = XEXP (x, i);
if (in_dest
&& i == 0
&& (((code == SUBREG || code == ZERO_EXTRACT)
- && REG_P (new))
+ && REG_P (new_rtx))
|| code == STRICT_LOW_PART))
;
return gen_rtx_CLOBBER (VOIDmode, const0_rtx);
#endif
- new = (unique_copy && n_occurrences ? copy_rtx (to) : to);
+ new_rtx = (unique_copy && n_occurrences ? copy_rtx (to) : to);
n_occurrences++;
}
else
STRICT_LOW_PART, and ZERO_EXTRACT, which are the only
things aside from REG and MEM that should appear in a
SET_DEST. */
- new = subst (XEXP (x, i), from, to,
+ new_rtx = subst (XEXP (x, i), from, to,
(((in_dest
&& (code == SUBREG || code == STRICT_LOW_PART
|| code == ZERO_EXTRACT))
well as prevent accidents where two CLOBBERs are considered
to be equal, thus producing an incorrect simplification. */
- if (GET_CODE (new) == CLOBBER && XEXP (new, 0) == const0_rtx)
- return new;
+ if (GET_CODE (new_rtx) == CLOBBER && XEXP (new_rtx, 0) == const0_rtx)
+ return new_rtx;
if (GET_CODE (x) == SUBREG
- && (GET_CODE (new) == CONST_INT
- || GET_CODE (new) == CONST_DOUBLE))
+ && (CONST_INT_P (new_rtx)
+ || GET_CODE (new_rtx) == CONST_DOUBLE))
{
enum machine_mode mode = GET_MODE (x);
- x = simplify_subreg (GET_MODE (x), new,
+ x = simplify_subreg (GET_MODE (x), new_rtx,
GET_MODE (SUBREG_REG (x)),
SUBREG_BYTE (x));
if (! x)
x = gen_rtx_CLOBBER (mode, const0_rtx);
}
- else if (GET_CODE (new) == CONST_INT
+ else if (CONST_INT_P (new_rtx)
&& GET_CODE (x) == ZERO_EXTEND)
{
x = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
- new, GET_MODE (XEXP (x, 0)));
+ new_rtx, GET_MODE (XEXP (x, 0)));
gcc_assert (x);
}
else
- SUBST (XEXP (x, i), new);
+ SUBST (XEXP (x, i), new_rtx);
}
}
}
+ /* Check if we are loading something from the constant pool via float
+ extension; in this case we would undo compress_float_constant
+ optimization and degenerate constant load to an immediate value. */
+ if (GET_CODE (x) == FLOAT_EXTEND
+ && MEM_P (XEXP (x, 0))
+ && MEM_READONLY_P (XEXP (x, 0)))
+ {
+ rtx tmp = avoid_constant_pool_reference (x);
+ if (x != tmp)
+ return x;
+ }
+
/* Try to simplify X. If the simplification changed the code, it is likely
that further simplification will help, so loop, but limit the number
of repetitions that will be performed. */
/* Likewise, we can make the negate of a comparison operation
if the result values are - STORE_FLAG_VALUE and zero. */
- else if (GET_CODE (true_rtx) == CONST_INT
+ else if (CONST_INT_P (true_rtx)
&& INTVAL (true_rtx) == - STORE_FLAG_VALUE
&& false_rtx == const0_rtx)
x = simplify_gen_unary (NEG, mode,
mode, VOIDmode,
cond, cop1),
mode);
- else if (GET_CODE (false_rtx) == CONST_INT
+ else if (CONST_INT_P (false_rtx)
&& INTVAL (false_rtx) == - STORE_FLAG_VALUE
&& true_rtx == const0_rtx
&& ((reversed = reversed_comparison_code_parts
|| code == AND || code == IOR || code == XOR
|| code == SMAX || code == SMIN || code == UMAX || code == UMIN)
&& ((INTEGRAL_MODE_P (mode) && code != DIV)
- || (flag_unsafe_math_optimizations && FLOAT_MODE_P (mode))))
+ || (flag_associative_math && FLOAT_MODE_P (mode))))
{
if (GET_CODE (XEXP (x, 0)) == code)
{
(neg (sign_extract X 1 Y)) to (zero_extract X 1 Y). */
if (GET_CODE (temp) == ASHIFTRT
- && GET_CODE (XEXP (temp, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (temp, 1))
&& INTVAL (XEXP (temp, 1)) == GET_MODE_BITSIZE (mode) - 1)
return simplify_shift_const (NULL_RTX, LSHIFTRT, mode, XEXP (temp, 0),
INTVAL (XEXP (temp, 1)));
if (GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)
break;
- if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
- GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))))
+ if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
SUBST (XEXP (x, 0),
force_to_mode (XEXP (x, 0), GET_MODE (XEXP (x, 0)),
GET_MODE_MASK (mode), 0));
+ /* We can truncate a constant value and return it. */
+ if (CONST_INT_P (XEXP (x, 0)))
+ return gen_int_mode (INTVAL (XEXP (x, 0)), mode);
+
/* Similarly to what we do in simplify-rtx.c, a truncate of a register
whose value is a comparison can be replaced with a subreg if
STORE_FLAG_VALUE permits. */
return gen_lowpart (mode, XEXP (x, 0));
break;
-#ifdef HAVE_cc0
- case COMPARE:
- /* Convert (compare FOO (const_int 0)) to FOO unless we aren't
- using cc0, in which case we want to leave it as a COMPARE
- so we can distinguish it from a register-register-copy. */
- if (XEXP (x, 1) == const0_rtx)
- return XEXP (x, 0);
-
- /* x - 0 is the same as x unless x's mode has signed zeros and
- allows rounding towards -infinity. Under those conditions,
- 0 - 0 is -0. */
- if (!(HONOR_SIGNED_ZEROS (GET_MODE (XEXP (x, 0)))
- && HONOR_SIGN_DEPENDENT_ROUNDING (GET_MODE (XEXP (x, 0))))
- && XEXP (x, 1) == CONST0_RTX (GET_MODE (XEXP (x, 0))))
- return XEXP (x, 0);
- break;
-#endif
-
case CONST:
/* (const (const X)) can become (const X). Do it this way rather than
returning the inner CONST since CONST can be shared with a
sign_extract. The `and' may be a zero_extend and the two
<c>, -<c> constants may be reversed. */
if (GET_CODE (XEXP (x, 0)) == XOR
- && GET_CODE (XEXP (x, 1)) == CONST_INT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (x, 1)) == -INTVAL (XEXP (XEXP (x, 0), 1))
&& ((i = exact_log2 (INTVAL (XEXP (XEXP (x, 0), 1)))) >= 0
|| (i = exact_log2 (INTVAL (XEXP (x, 1)))) >= 0)
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& ((GET_CODE (XEXP (XEXP (x, 0), 0)) == AND
- && GET_CODE (XEXP (XEXP (XEXP (x, 0), 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (XEXP (x, 0), 0), 1))
&& (INTVAL (XEXP (XEXP (XEXP (x, 0), 0), 1))
== ((HOST_WIDE_INT) 1 << (i + 1)) - 1))
|| (GET_CODE (XEXP (XEXP (x, 0), 0)) == ZERO_EXTEND
/* (minus <foo> (and <foo> (const_int -pow2))) becomes
(and <foo> (const_int pow2-1)) */
if (GET_CODE (XEXP (x, 1)) == AND
- && GET_CODE (XEXP (XEXP (x, 1), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 1), 1))
&& exact_log2 (-INTVAL (XEXP (XEXP (x, 1), 1))) >= 0
&& rtx_equal_p (XEXP (XEXP (x, 1), 0), XEXP (x, 0)))
return simplify_and_const_int (NULL_RTX, mode, XEXP (x, 0),
}
/* Try simplify a*(b/c) as (a*b)/c. */
- if (FLOAT_MODE_P (mode) && flag_unsafe_math_optimizations
+ if (FLOAT_MODE_P (mode) && flag_associative_math
&& GET_CODE (XEXP (x, 0)) == DIV)
{
rtx tem = simplify_binary_operation (MULT, mode,
case UDIV:
/* If this is a divide by a power of two, treat it as a shift if
its first operand is a shift. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& (i = exact_log2 (INTVAL (XEXP (x, 1)))) >= 0
&& (GET_CODE (XEXP (x, 0)) == ASHIFT
|| GET_CODE (XEXP (x, 0)) == LSHIFTRT
case ROTATE:
case ROTATERT:
/* If this is a shift by a constant amount, simplify it. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT)
+ if (CONST_INT_P (XEXP (x, 1)))
return simplify_shift_const (x, code, mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
&& reversed_comparison_code (cond, NULL) != UNKNOWN
&& (true_rtx == pc_rtx
|| (CONSTANT_P (true_rtx)
- && GET_CODE (false_rtx) != CONST_INT && false_rtx != pc_rtx)
+ && !CONST_INT_P (false_rtx) && false_rtx != pc_rtx)
|| true_rtx == const0_rtx
|| (OBJECT_P (true_rtx) && !OBJECT_P (false_rtx))
|| (GET_CODE (true_rtx) == SUBREG && OBJECT_P (SUBREG_REG (true_rtx))
/* Look for cases where we have (abs x) or (neg (abs X)). */
if (GET_MODE_CLASS (mode) == MODE_INT
+ && comparison_p
+ && XEXP (cond, 1) == const0_rtx
&& GET_CODE (false_rtx) == NEG
&& rtx_equal_p (true_rtx, XEXP (false_rtx, 0))
- && comparison_p
&& rtx_equal_p (true_rtx, XEXP (cond, 0))
&& ! side_effects_p (true_rtx))
switch (true_code)
can actually do this more generally, but it doesn't seem worth it. */
if (true_code == NE && XEXP (cond, 1) == const0_rtx
- && false_rtx == const0_rtx && GET_CODE (true_rtx) == CONST_INT
+ && false_rtx == const0_rtx && CONST_INT_P (true_rtx)
&& ((1 == nonzero_bits (XEXP (cond, 0), mode)
&& (i = exact_log2 (INTVAL (true_rtx))) >= 0)
|| ((num_sign_bit_copies (XEXP (cond, 0), mode)
/* (IF_THEN_ELSE (NE REG 0) (0) (8)) is REG for nonzero_bits (REG) == 8. */
if (true_code == NE && XEXP (cond, 1) == const0_rtx
- && false_rtx == const0_rtx && GET_CODE (true_rtx) == CONST_INT
+ && false_rtx == const0_rtx && CONST_INT_P (true_rtx)
&& GET_MODE (XEXP (cond, 0)) == mode
&& (INTVAL (true_rtx) & GET_MODE_MASK (mode))
== nonzero_bits (XEXP (cond, 0), mode)
/* Attempt to simplify CC user. */
if (GET_CODE (pat) == SET)
{
- rtx new = simplify_rtx (SET_SRC (pat));
- if (new != NULL_RTX)
- SUBST (SET_SRC (pat), new);
+ rtx new_rtx = simplify_rtx (SET_SRC (pat));
+ if (new_rtx != NULL_RTX)
+ SUBST (SET_SRC (pat), new_rtx);
}
/* Convert X into a no-op move. */
{
int other_changed_previously = other_changed;
unsigned HOST_WIDE_INT mask;
+ rtx old_cc_use = *cc_use;
SUBST (*cc_use, gen_rtx_fmt_ee (new_code, GET_MODE (*cc_use),
dest, const0_rtx));
if ((recog_for_combine (&pat, other_insn, ¬e) < 0
&& ! check_asm_operands (pat)))
{
- PUT_CODE (*cc_use, old_code);
+ *cc_use = old_cc_use;
other_changed = 0;
op0 = simplify_gen_binary (XOR, GET_MODE (op0),
if (other_changed)
undobuf.other_insn = other_insn;
-#ifdef HAVE_cc0
- /* If we are now comparing against zero, change our source if
- needed. If we do not use cc0, we always have a COMPARE. */
- if (op1 == const0_rtx && dest == cc0_rtx)
- {
- SUBST (SET_SRC (x), op0);
- src = op0;
- }
- else
-#endif
-
/* Otherwise, if we didn't previously have a COMPARE in the
correct mode, we need one. */
if (GET_CODE (src) != COMPARE || GET_MODE (src) != compare_mode)
zero_extend to avoid the reload that would otherwise be required. */
if (GET_CODE (src) == SUBREG && subreg_lowpart_p (src)
+ && INTEGRAL_MODE_P (GET_MODE (SUBREG_REG (src)))
&& LOAD_EXTEND_OP (GET_MODE (SUBREG_REG (src))) != UNKNOWN
&& SUBREG_BYTE (src) == 0
&& (GET_MODE_SIZE (GET_MODE (src))
/* We can call simplify_and_const_int only if we don't lose
any (sign) bits when converting INTVAL (op1) to
"unsigned HOST_WIDE_INT". */
- if (GET_CODE (op1) == CONST_INT
+ if (CONST_INT_P (op1)
&& (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
|| INTVAL (op1) > 0))
{
Even for a mode that is no wider than a const_int,
we can't win, because we need to sign extend one of its bits through
the rest of it, and we don't know which bit. */
- if (GET_CODE (XEXP (x, 0)) == CONST_INT)
+ if (CONST_INT_P (XEXP (x, 0)))
return x;
/* Return if (subreg:MODE FROM 0) is not a safe replacement for
if (GET_CODE (XEXP (x, 0)) == CLOBBER)
return XEXP (x, 0);
- if (GET_CODE (XEXP (x, 1)) != CONST_INT
- || GET_CODE (XEXP (x, 2)) != CONST_INT
+ if (!CONST_INT_P (XEXP (x, 1))
+ || !CONST_INT_P (XEXP (x, 2))
|| GET_MODE (XEXP (x, 0)) == VOIDmode)
return x;
rtx temp2 = expand_compound_operation (temp);
/* Make sure this is a profitable operation. */
- if (rtx_cost (x, SET) > rtx_cost (temp2, SET))
+ if (rtx_cost (x, SET, optimize_this_for_speed_p)
+ > rtx_cost (temp2, SET, optimize_this_for_speed_p))
return temp2;
- else if (rtx_cost (x, SET) > rtx_cost (temp, SET))
+ else if (rtx_cost (x, SET, optimize_this_for_speed_p)
+ > rtx_cost (temp, SET, optimize_this_for_speed_p))
return temp;
else
return x;
We half-heartedly support variable positions, but do not at all
support variable lengths. */
-static rtx
-expand_field_assignment (rtx x)
+static const_rtx
+expand_field_assignment (const_rtx x)
{
rtx inner;
rtx pos; /* Always counts from low bit. */
pos = GEN_INT (subreg_lsb (XEXP (SET_DEST (x), 0)));
}
else if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
- && GET_CODE (XEXP (SET_DEST (x), 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (SET_DEST (x), 1)))
{
inner = XEXP (SET_DEST (x), 0);
len = INTVAL (XEXP (SET_DEST (x), 1));
pos = XEXP (SET_DEST (x), 2);
/* A constant position should stay within the width of INNER. */
- if (GET_CODE (pos) == CONST_INT
+ if (CONST_INT_P (pos)
&& INTVAL (pos) + len > GET_MODE_BITSIZE (GET_MODE (inner)))
break;
if (BITS_BIG_ENDIAN)
{
- if (GET_CODE (pos) == CONST_INT)
+ if (CONST_INT_P (pos))
pos = GEN_INT (GET_MODE_BITSIZE (GET_MODE (inner)) - len
- INTVAL (pos));
else if (GET_CODE (pos) == MINUS
- && GET_CODE (XEXP (pos, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (pos, 1))
&& (INTVAL (XEXP (pos, 1))
== GET_MODE_BITSIZE (GET_MODE (inner)) - len))
/* If position is ADJUST - X, new position is X. */
enum machine_mode pos_mode = word_mode;
enum machine_mode extraction_mode = word_mode;
enum machine_mode tmode = mode_for_size (len, MODE_INT, 1);
- rtx new = 0;
+ rtx new_rtx = 0;
rtx orig_pos_rtx = pos_rtx;
HOST_WIDE_INT orig_pos;
inner = SUBREG_REG (inner);
}
else if (GET_CODE (inner) == ASHIFT
- && GET_CODE (XEXP (inner, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (inner, 1))
&& pos_rtx == 0 && pos == 0
&& len > (unsigned HOST_WIDE_INT) INTVAL (XEXP (inner, 1)))
{
(ashift X (const_int C)), where LEN > C. Extract the
least significant (LEN - C) bits of X, giving an rtx
whose mode is MODE, then shift it left C times. */
- new = make_extraction (mode, XEXP (inner, 0),
+ new_rtx = make_extraction (mode, XEXP (inner, 0),
0, 0, len - INTVAL (XEXP (inner, 1)),
unsignedp, in_dest, in_compare);
- if (new != 0)
- return gen_rtx_ASHIFT (mode, new, XEXP (inner, 1));
+ if (new_rtx != 0)
+ return gen_rtx_ASHIFT (mode, new_rtx, XEXP (inner, 1));
}
inner_mode = GET_MODE (inner);
- if (pos_rtx && GET_CODE (pos_rtx) == CONST_INT)
+ if (pos_rtx && CONST_INT_P (pos_rtx))
pos = INTVAL (pos_rtx), pos_rtx = 0;
/* See if this can be done without an extraction. We never can if the
else
offset = pos / BITS_PER_UNIT;
- new = adjust_address_nv (inner, tmode, offset);
+ new_rtx = adjust_address_nv (inner, tmode, offset);
}
else if (REG_P (inner))
{
if (!validate_subreg (tmode, inner_mode, inner, final_word))
return NULL_RTX;
- new = gen_rtx_SUBREG (tmode, inner, final_word);
+ new_rtx = gen_rtx_SUBREG (tmode, inner, final_word);
}
else
- new = gen_lowpart (tmode, inner);
+ new_rtx = gen_lowpart (tmode, inner);
}
else
- new = inner;
+ new_rtx = inner;
}
else
- new = force_to_mode (inner, tmode,
+ new_rtx = force_to_mode (inner, tmode,
len >= HOST_BITS_PER_WIDE_INT
? ~(unsigned HOST_WIDE_INT) 0
: ((unsigned HOST_WIDE_INT) 1 << len) - 1,
make a STRICT_LOW_PART unless we made a MEM. */
if (in_dest)
- return (MEM_P (new) ? new
- : (GET_CODE (new) != SUBREG
+ return (MEM_P (new_rtx) ? new_rtx
+ : (GET_CODE (new_rtx) != SUBREG
? gen_rtx_CLOBBER (tmode, const0_rtx)
- : gen_rtx_STRICT_LOW_PART (VOIDmode, new)));
+ : gen_rtx_STRICT_LOW_PART (VOIDmode, new_rtx)));
if (mode == tmode)
- return new;
+ return new_rtx;
- if (GET_CODE (new) == CONST_INT)
- return gen_int_mode (INTVAL (new), mode);
+ if (CONST_INT_P (new_rtx)
+ || GET_CODE (new_rtx) == CONST_DOUBLE)
+ return simplify_unary_operation (unsignedp ? ZERO_EXTEND : SIGN_EXTEND,
+ mode, new_rtx, tmode);
/* If we know that no extraneous bits are set, and that the high
bit is not set, convert the extraction to the cheaper of
sign and zero extension, that are equivalent in these cases. */
if (flag_expensive_optimizations
&& (GET_MODE_BITSIZE (tmode) <= HOST_BITS_PER_WIDE_INT
- && ((nonzero_bits (new, tmode)
+ && ((nonzero_bits (new_rtx, tmode)
& ~(((unsigned HOST_WIDE_INT)
GET_MODE_MASK (tmode))
>> 1))
== 0)))
{
- rtx temp = gen_rtx_ZERO_EXTEND (mode, new);
- rtx temp1 = gen_rtx_SIGN_EXTEND (mode, new);
+ rtx temp = gen_rtx_ZERO_EXTEND (mode, new_rtx);
+ rtx temp1 = gen_rtx_SIGN_EXTEND (mode, new_rtx);
/* Prefer ZERO_EXTENSION, since it gives more information to
backends. */
- if (rtx_cost (temp, SET) <= rtx_cost (temp1, SET))
+ if (rtx_cost (temp, SET, optimize_this_for_speed_p)
+ <= rtx_cost (temp1, SET, optimize_this_for_speed_p))
return temp;
return temp1;
}
proper mode. */
return (gen_rtx_fmt_e (unsignedp ? ZERO_EXTEND : SIGN_EXTEND,
- mode, new));
+ mode, new_rtx));
}
/* Unless this is a COMPARE or we have a funny memory reference,
inner = adjust_address_nv (inner, wanted_inner_mode, offset);
}
- /* If INNER is not memory, we can always get it into the proper mode. If we
- are changing its mode, POS must be a constant and smaller than the size
- of the new mode. */
+ /* If INNER is not memory, get it into the proper mode. If we are changing
+ its mode, POS must be a constant and smaller than the size of the new
+ mode. */
else if (!MEM_P (inner))
{
+ /* On the LHS, don't create paradoxical subregs implicitely truncating
+ the register unless TRULY_NOOP_TRUNCATION. */
+ if (in_dest
+ && !TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (GET_MODE (inner)),
+ GET_MODE_BITSIZE (wanted_inner_mode)))
+ return NULL_RTX;
+
if (GET_MODE (inner) != wanted_inner_mode
&& (pos_rtx != 0
|| orig_pos + len > GET_MODE_BITSIZE (wanted_inner_mode)))
- return 0;
+ return NULL_RTX;
if (orig_pos < 0)
- return 0;
+ return NULL_RTX;
inner = force_to_mode (inner, wanted_inner_mode,
pos_rtx
/* Prefer ZERO_EXTENSION, since it gives more information to
backends. */
- if (rtx_cost (temp1, SET) < rtx_cost (temp, SET))
+ if (rtx_cost (temp1, SET, optimize_this_for_speed_p)
+ < rtx_cost (temp, SET, optimize_this_for_speed_p))
temp = temp1;
}
pos_rtx = temp;
pos_rtx = GEN_INT (pos);
/* Make the required operation. See if we can use existing rtx. */
- new = gen_rtx_fmt_eee (unsignedp ? ZERO_EXTRACT : SIGN_EXTRACT,
+ new_rtx = gen_rtx_fmt_eee (unsignedp ? ZERO_EXTRACT : SIGN_EXTRACT,
extraction_mode, inner, GEN_INT (len), pos_rtx);
if (! in_dest)
- new = gen_lowpart (mode, new);
+ new_rtx = gen_lowpart (mode, new_rtx);
- return new;
+ return new_rtx;
}
\f
/* See if X contains an ASHIFT of COUNT or more bits that can be commuted
/* This is the shift itself. If it is wide enough, we will return
either the value being shifted if the shift count is equal to
COUNT or a shift for the difference. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= count)
return simplify_shift_const (NULL_RTX, ASHIFT, mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)) - count);
case PLUS: case IOR: case XOR: case AND:
/* If we can safely shift this constant and we find the inner shift,
make a new operation. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& (INTVAL (XEXP (x, 1)) & ((((HOST_WIDE_INT) 1 << count)) - 1)) == 0
&& (tem = extract_left_shift (XEXP (x, 0), count)) != 0)
return simplify_gen_binary (code, mode, tem,
int mode_width = GET_MODE_BITSIZE (mode);
rtx rhs, lhs;
enum rtx_code next_code;
- int i;
- rtx new = 0;
+ int i, j;
+ rtx new_rtx = 0;
rtx tem;
const char *fmt;
case ASHIFT:
/* Convert shifts by constants into multiplications if inside
an address. */
- if (in_code == MEM && GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (in_code == MEM && CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
&& INTVAL (XEXP (x, 1)) >= 0)
{
- new = make_compound_operation (XEXP (x, 0), next_code);
- new = gen_rtx_MULT (mode, new,
+ new_rtx = make_compound_operation (XEXP (x, 0), next_code);
+ new_rtx = gen_rtx_MULT (mode, new_rtx,
GEN_INT ((HOST_WIDE_INT) 1
<< INTVAL (XEXP (x, 1))));
}
case AND:
/* If the second operand is not a constant, we can't do anything
with it. */
- if (GET_CODE (XEXP (x, 1)) != CONST_INT)
+ if (!CONST_INT_P (XEXP (x, 1)))
break;
/* If the constant is a power of two minus one and the first operand
if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
&& (i = exact_log2 (INTVAL (XEXP (x, 1)) + 1)) >= 0)
{
- new = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
- new = make_extraction (mode, new, 0, XEXP (XEXP (x, 0), 1), i, 1,
+ new_rtx = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
+ new_rtx = make_extraction (mode, new_rtx, 0, XEXP (XEXP (x, 0), 1), i, 1,
0, in_code == COMPARE);
}
&& GET_CODE (SUBREG_REG (XEXP (x, 0))) == LSHIFTRT
&& (i = exact_log2 (INTVAL (XEXP (x, 1)) + 1)) >= 0)
{
- new = make_compound_operation (XEXP (SUBREG_REG (XEXP (x, 0)), 0),
+ new_rtx = make_compound_operation (XEXP (SUBREG_REG (XEXP (x, 0)), 0),
next_code);
- new = make_extraction (GET_MODE (SUBREG_REG (XEXP (x, 0))), new, 0,
+ new_rtx = make_extraction (GET_MODE (SUBREG_REG (XEXP (x, 0))), new_rtx, 0,
XEXP (SUBREG_REG (XEXP (x, 0)), 1), i, 1,
0, in_code == COMPARE);
}
&& (i = exact_log2 (INTVAL (XEXP (x, 1)) + 1)) >= 0)
{
/* Apply the distributive law, and then try to make extractions. */
- new = gen_rtx_fmt_ee (GET_CODE (XEXP (x, 0)), mode,
+ new_rtx = gen_rtx_fmt_ee (GET_CODE (XEXP (x, 0)), mode,
gen_rtx_AND (mode, XEXP (XEXP (x, 0), 0),
XEXP (x, 1)),
gen_rtx_AND (mode, XEXP (XEXP (x, 0), 1),
XEXP (x, 1)));
- new = make_compound_operation (new, in_code);
+ new_rtx = make_compound_operation (new_rtx, in_code);
}
/* If we are have (and (rotate X C) M) and C is larger than the number
of bits in M, this is an extraction. */
else if (GET_CODE (XEXP (x, 0)) == ROTATE
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& (i = exact_log2 (INTVAL (XEXP (x, 1)) + 1)) >= 0
&& i <= INTVAL (XEXP (XEXP (x, 0), 1)))
{
- new = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
- new = make_extraction (mode, new,
+ new_rtx = make_compound_operation (XEXP (XEXP (x, 0), 0), next_code);
+ new_rtx = make_extraction (mode, new_rtx,
(GET_MODE_BITSIZE (mode)
- INTVAL (XEXP (XEXP (x, 0), 1))),
NULL_RTX, i, 1, 0, in_code == COMPARE);
else if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
&& !have_insn_for (LSHIFTRT, mode)
&& have_insn_for (ASHIFTRT, mode)
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT
&& mode_width <= HOST_BITS_PER_WIDE_INT)
If it doesn't end up being a ZERO_EXTEND, we will ignore it unless
we are in a COMPARE. */
else if ((i = exact_log2 (INTVAL (XEXP (x, 1)) + 1)) >= 0)
- new = make_extraction (mode,
+ new_rtx = make_extraction (mode,
make_compound_operation (XEXP (x, 0),
next_code),
0, NULL_RTX, i, 1, 0, in_code == COMPARE);
convert this into the appropriate bit extract. */
else if (in_code == COMPARE
&& (i = exact_log2 (INTVAL (XEXP (x, 1)))) >= 0)
- new = make_extraction (mode,
+ new_rtx = make_extraction (mode,
make_compound_operation (XEXP (x, 0),
next_code),
i, NULL_RTX, 1, 1, 0, 1);
&& mode_width <= HOST_BITS_PER_WIDE_INT
&& (nonzero_bits (XEXP (x, 0), mode) & (1 << (mode_width - 1))) == 0)
{
- new = gen_rtx_ASHIFTRT (mode,
+ new_rtx = gen_rtx_ASHIFTRT (mode,
make_compound_operation (XEXP (x, 0),
next_code),
XEXP (x, 1));
/* If we have (ashiftrt (ashift foo C1) C2) with C2 >= C1,
this is a SIGN_EXTRACT. */
- if (GET_CODE (rhs) == CONST_INT
+ if (CONST_INT_P (rhs)
&& GET_CODE (lhs) == ASHIFT
- && GET_CODE (XEXP (lhs, 1)) == CONST_INT
- && INTVAL (rhs) >= INTVAL (XEXP (lhs, 1)))
+ && CONST_INT_P (XEXP (lhs, 1))
+ && INTVAL (rhs) >= INTVAL (XEXP (lhs, 1))
+ && INTVAL (rhs) < mode_width)
{
- new = make_compound_operation (XEXP (lhs, 0), next_code);
- new = make_extraction (mode, new,
+ new_rtx = make_compound_operation (XEXP (lhs, 0), next_code);
+ new_rtx = make_extraction (mode, new_rtx,
INTVAL (rhs) - INTVAL (XEXP (lhs, 1)),
NULL_RTX, mode_width - INTVAL (rhs),
code == LSHIFTRT, 0, in_code == COMPARE);
if (!OBJECT_P (lhs)
&& ! (GET_CODE (lhs) == SUBREG
&& (OBJECT_P (SUBREG_REG (lhs))))
- && GET_CODE (rhs) == CONST_INT
+ && CONST_INT_P (rhs)
&& INTVAL (rhs) < HOST_BITS_PER_WIDE_INT
- && (new = extract_left_shift (lhs, INTVAL (rhs))) != 0)
- new = make_extraction (mode, make_compound_operation (new, next_code),
+ && INTVAL (rhs) < mode_width
+ && (new_rtx = extract_left_shift (lhs, INTVAL (rhs))) != 0)
+ new_rtx = make_extraction (mode, make_compound_operation (new_rtx, next_code),
0, NULL_RTX, mode_width - INTVAL (rhs),
code == LSHIFTRT, 0, in_code == COMPARE);
tem = make_compound_operation (SUBREG_REG (x), in_code);
{
- rtx simplified;
- simplified = simplify_subreg (GET_MODE (x), tem, GET_MODE (tem),
- SUBREG_BYTE (x));
+ rtx simplified = simplify_subreg (mode, tem, GET_MODE (SUBREG_REG (x)),
+ SUBREG_BYTE (x));
if (simplified)
tem = simplified;
if (GET_CODE (tem) != GET_CODE (SUBREG_REG (x))
- && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (tem))
+ && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))
&& subreg_lowpart_p (x))
{
rtx newer = force_to_mode (tem, mode, ~(HOST_WIDE_INT) 0,
if (GET_CODE (newer) != SUBREG)
newer = make_compound_operation (newer, in_code);
+ /* force_to_mode can expand compounds. If it just re-expanded the
+ compound use gen_lowpart instead to convert to the desired
+ mode. */
+ if (rtx_equal_p (newer, x))
+ return gen_lowpart (GET_MODE (x), tem);
+
return newer;
}
break;
}
- if (new)
+ if (new_rtx)
{
- x = gen_lowpart (mode, new);
+ x = gen_lowpart (mode, new_rtx);
code = GET_CODE (x);
}
for (i = 0; i < GET_RTX_LENGTH (code); i++)
if (fmt[i] == 'e')
{
- new = make_compound_operation (XEXP (x, i), next_code);
- SUBST (XEXP (x, i), new);
+ new_rtx = make_compound_operation (XEXP (x, i), next_code);
+ SUBST (XEXP (x, i), new_rtx);
}
+ else if (fmt[i] == 'E')
+ for (j = 0; j < XVECLEN (x, i); j++)
+ {
+ new_rtx = make_compound_operation (XVECEXP (x, i, j), next_code);
+ SUBST (XVECEXP (x, i, j), new_rtx);
+ }
/* If this is a commutative operation, the changes to the operands
may have made it noncanonical. */
static rtx
gen_lowpart_or_truncate (enum machine_mode mode, rtx x)
{
- if (GET_MODE_SIZE (GET_MODE (x)) <= GET_MODE_SIZE (mode)
- || TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
- GET_MODE_BITSIZE (GET_MODE (x)))
- || (REG_P (x) && reg_truncated_to_mode (mode, x)))
- return gen_lowpart (mode, x);
- else
- return simplify_gen_unary (TRUNCATE, mode, x, GET_MODE (x));
+ if (!CONST_INT_P (x)
+ && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (x))
+ && !TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
+ GET_MODE_BITSIZE (GET_MODE (x)))
+ && !(REG_P (x) && reg_truncated_to_mode (mode, x)))
+ {
+ /* Bit-cast X into an integer mode. */
+ if (!SCALAR_INT_MODE_P (GET_MODE (x)))
+ x = gen_lowpart (int_mode_for_mode (GET_MODE (x)), x);
+ x = simplify_gen_unary (TRUNCATE, int_mode_for_mode (mode),
+ x, GET_MODE (x));
+ }
+
+ return gen_lowpart (mode, x);
}
/* See if X can be simplified knowing that we will only refer to it in
/* If X is a CONST_INT, return a new one. Do this here since the
test below will fail. */
- if (GET_CODE (x) == CONST_INT)
+ if (CONST_INT_P (x))
{
if (SCALAR_INT_MODE_P (mode))
return gen_int_mode (INTVAL (x) & mask, mode);
&& (GET_MODE_MASK (GET_MODE (x)) & ~mask) == 0)
return gen_lowpart (mode, x);
+ /* We can ignore the effect of a SUBREG if it narrows the mode or
+ if the constant masks to zero all the bits the mode doesn't have. */
+ if (GET_CODE (x) == SUBREG
+ && subreg_lowpart_p (x)
+ && ((GET_MODE_SIZE (GET_MODE (x))
+ < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
+ || (0 == (mask
+ & GET_MODE_MASK (GET_MODE (x))
+ & ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x)))))))
+ return force_to_mode (SUBREG_REG (x), mode, mask, next_select);
+
+ /* The arithmetic simplifications here only work for scalar integer modes. */
+ if (!SCALAR_INT_MODE_P (mode) || !SCALAR_INT_MODE_P (GET_MODE (x)))
+ return gen_lowpart_or_truncate (mode, x);
+
switch (code)
{
case CLOBBER:
return force_to_mode (x, mode, mask, next_select);
break;
- case SUBREG:
- if (subreg_lowpart_p (x)
- /* We can ignore the effect of this SUBREG if it narrows the mode or
- if the constant masks to zero all the bits the mode doesn't
- have. */
- && ((GET_MODE_SIZE (GET_MODE (x))
- < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
- || (0 == (mask
- & GET_MODE_MASK (GET_MODE (x))
- & ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x)))))))
- return force_to_mode (SUBREG_REG (x), mode, mask, next_select);
- break;
+ case TRUNCATE:
+ /* Similarly for a truncate. */
+ return force_to_mode (XEXP (x, 0), mode, mask, next_select);
case AND:
/* If this is an AND with a constant, convert it into an AND
whose constant is the AND of that constant with MASK. If it
remains an AND of MASK, delete it since it is redundant. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT)
+ if (CONST_INT_P (XEXP (x, 1)))
{
x = simplify_and_const_int (x, op_mode, XEXP (x, 0),
mask & INTVAL (XEXP (x, 1)));
is just some low-order bits. If so, and it is MASK, we don't
need it. */
- if (GET_CODE (x) == AND && GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (GET_CODE (x) == AND && CONST_INT_P (XEXP (x, 1))
&& ((INTVAL (XEXP (x, 1)) & GET_MODE_MASK (GET_MODE (x)))
== mask))
x = XEXP (x, 0);
constant in the AND is wide enough, this might make a
cheaper constant. */
- if (GET_CODE (x) == AND && GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (GET_CODE (x) == AND && CONST_INT_P (XEXP (x, 1))
&& GET_MODE_MASK (GET_MODE (x)) != mask
&& GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT)
{
y = simplify_gen_binary (AND, GET_MODE (x),
XEXP (x, 0), GEN_INT (cval));
- if (rtx_cost (y, SET) < rtx_cost (x, SET))
+ if (rtx_cost (y, SET, optimize_this_for_speed_p)
+ < rtx_cost (x, SET, optimize_this_for_speed_p))
x = y;
}
&& (smask & ((HOST_WIDE_INT) 1 << (width - 1))) != 0)
smask |= (HOST_WIDE_INT) -1 << width;
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& exact_log2 (- smask) >= 0
&& (nonzero_bits (XEXP (x, 0), mode) & ~smask) == 0
&& (INTVAL (XEXP (x, 1)) & ~smask) != 0)
case MINUS:
/* If X is (minus C Y) where C's least set bit is larger than any bit
in the mask, then we may replace with (neg Y). */
- if (GET_CODE (XEXP (x, 0)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 0))
&& (((unsigned HOST_WIDE_INT) (INTVAL (XEXP (x, 0))
& -INTVAL (XEXP (x, 0))))
> mask))
/* Similarly, if C contains every bit in the fuller_mask, then we may
replace with (not Y). */
- if (GET_CODE (XEXP (x, 0)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 0))
&& ((INTVAL (XEXP (x, 0)) | (HOST_WIDE_INT) fuller_mask)
== INTVAL (XEXP (x, 0))))
{
constant we form is not wider than the mode of X. */
if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT
- && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
&& ((INTVAL (XEXP (XEXP (x, 0), 1))
+ floor_log2 (INTVAL (XEXP (x, 1))))
< GET_MODE_BITSIZE (GET_MODE (x)))
/* For most binary operations, just propagate into the operation and
change the mode if we have an operation of that mode. */
- op0 = gen_lowpart_or_truncate (op_mode,
- force_to_mode (XEXP (x, 0), mode, mask,
- next_select));
- op1 = gen_lowpart_or_truncate (op_mode,
- force_to_mode (XEXP (x, 1), mode, mask,
- next_select));
+ op0 = force_to_mode (XEXP (x, 0), mode, mask, next_select);
+ op1 = force_to_mode (XEXP (x, 1), mode, mask, next_select);
+
+ /* If we ended up truncating both operands, truncate the result of the
+ operation instead. */
+ if (GET_CODE (op0) == TRUNCATE
+ && GET_CODE (op1) == TRUNCATE)
+ {
+ op0 = XEXP (op0, 0);
+ op1 = XEXP (op1, 0);
+ }
+
+ op0 = gen_lowpart_or_truncate (op_mode, op0);
+ op1 = gen_lowpart_or_truncate (op_mode, op1);
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
x = simplify_gen_binary (code, op_mode, op0, op1);
because such a count will have a different meaning in a
wider mode. */
- if (! (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (! (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < GET_MODE_BITSIZE (mode))
&& ! (GET_MODE (XEXP (x, 1)) != VOIDmode
/* If the shift count is a constant and we can do arithmetic in
the mode of the shift, refine which bits we need. Otherwise, use the
conservative form of the mask. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < GET_MODE_BITSIZE (op_mode)
&& GET_MODE_BITSIZE (op_mode) <= HOST_BITS_PER_WIDE_INT)
this shift constant is valid for the host, and we can do arithmetic
in OP_MODE. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
&& GET_MODE_BITSIZE (op_mode) <= HOST_BITS_PER_WIDE_INT)
{
than a power of two), we can do this with just a shift. */
if (GET_CODE (x) == LSHIFTRT
- && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
/* The shift puts one of the sign bit copies in the least significant
bit. */
&& ((INTVAL (XEXP (x, 1))
those bits, we are requesting a copy of the sign bit and hence can
shift the sign bit to the appropriate location. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT && INTVAL (XEXP (x, 1)) >= 0
+ if (CONST_INT_P (XEXP (x, 1)) && INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT)
{
int i;
something that is still a shift. */
if ((GET_CODE (x) == LSHIFTRT || GET_CODE (x) == ASHIFTRT)
- && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& (INTVAL (XEXP (x, 1))
<= GET_MODE_BITSIZE (GET_MODE (x)) - (floor_log2 (mask) + 1))
in the mode of X, compute where the bits we care about are.
Otherwise, we can't do anything. Don't change the mode of
the shift or propagate MODE into the shift, though. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0)
{
temp = simplify_binary_operation (code == ROTATE ? ROTATERT : ROTATE,
GET_MODE (x), GEN_INT (mask),
XEXP (x, 1));
- if (temp && GET_CODE (temp) == CONST_INT)
+ if (temp && CONST_INT_P (temp))
SUBST (XEXP (x, 0),
force_to_mode (XEXP (x, 0), GET_MODE (x),
INTVAL (temp), next_select));
wider than the mode of X. */
if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& (INTVAL (XEXP (XEXP (x, 0), 1)) + floor_log2 (mask)
< GET_MODE_BITSIZE (GET_MODE (x)))
else if (code == SUBREG)
{
enum machine_mode inner_mode = GET_MODE (SUBREG_REG (x));
- rtx new, r = known_cond (SUBREG_REG (x), cond, reg, val);
+ rtx new_rtx, r = known_cond (SUBREG_REG (x), cond, reg, val);
if (SUBREG_REG (x) != r)
{
/* We must simplify subreg here, before we lose track of the
original inner_mode. */
- new = simplify_subreg (GET_MODE (x), r,
+ new_rtx = simplify_subreg (GET_MODE (x), r,
inner_mode, SUBREG_BYTE (x));
- if (new)
- return new;
+ if (new_rtx)
+ return new_rtx;
else
SUBST (SUBREG_REG (x), r);
}
else if (code == ZERO_EXTEND)
{
enum machine_mode inner_mode = GET_MODE (XEXP (x, 0));
- rtx new, r = known_cond (XEXP (x, 0), cond, reg, val);
+ rtx new_rtx, r = known_cond (XEXP (x, 0), cond, reg, val);
if (XEXP (x, 0) != r)
{
/* We must simplify the zero_extend here, before we lose
track of the original inner_mode. */
- new = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
+ new_rtx = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
r, inner_mode);
- if (new)
- return new;
+ if (new_rtx)
+ return new_rtx;
else
SUBST (XEXP (x, 0), r);
}
for a SUBREG. */
if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == ROTATE
- && GET_CODE (XEXP (XEXP (src, 0), 0)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (src, 0), 0))
&& INTVAL (XEXP (XEXP (src, 0), 0)) == -2
&& rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
&& (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
< GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
&& GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
- && GET_CODE (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == CONST_INT
+ && CONST_INT_P (XEXP (SUBREG_REG (XEXP (src, 0)), 0))
&& INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
&& rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
SRC is an AND with all bits of that field set, then we can discard
the AND. */
if (GET_CODE (dest) == ZERO_EXTRACT
- && GET_CODE (XEXP (dest, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (dest, 1))
&& GET_CODE (src) == AND
- && GET_CODE (XEXP (src, 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (src, 1)))
{
HOST_WIDE_INT width = INTVAL (XEXP (dest, 1));
unsigned HOST_WIDE_INT and_mask = INTVAL (XEXP (src, 1));
lhs = expand_compound_operation (XEXP (src, 1));
if (GET_CODE (rhs) == AND
- && GET_CODE (XEXP (rhs, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (rhs, 1))
&& rtx_equal_for_field_assignment_p (XEXP (rhs, 0), dest))
c1 = INTVAL (XEXP (rhs, 1)), other = lhs;
else if (GET_CODE (lhs) == AND
- && GET_CODE (XEXP (lhs, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (lhs, 1))
&& rtx_equal_for_field_assignment_p (XEXP (lhs, 0), dest))
c1 = INTVAL (XEXP (lhs, 1)), other = rhs;
else
/* If SRC is masked by an AND that does not make a difference in
the value being stored, strip it. */
if (GET_CODE (assign) == ZERO_EXTRACT
- && GET_CODE (XEXP (assign, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (assign, 1))
&& INTVAL (XEXP (assign, 1)) < HOST_BITS_PER_WIDE_INT
&& GET_CODE (src) == AND
- && GET_CODE (XEXP (src, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (src, 1))
&& ((unsigned HOST_WIDE_INT) INTVAL (XEXP (src, 1))
== ((unsigned HOST_WIDE_INT) 1 << INTVAL (XEXP (assign, 1))) - 1))
src = XEXP (src, 0);
enum rtx_code outer_code, inner_code;
rtx decomposed, distributed, inner_op0, inner_op1, new_op0, new_op1, tmp;
+ /* Distributivity is not true for floating point as it can change the
+ value. So we don't do it unless -funsafe-math-optimizations. */
+ if (FLOAT_MODE_P (GET_MODE (x))
+ && ! flag_unsafe_math_optimizations)
+ return NULL_RTX;
+
decomposed = XEXP (x, n);
if (!ARITHMETIC_P (decomposed))
return NULL_RTX;
tmp = apply_distributive_law (simplify_gen_binary (inner_code, mode,
new_op0, new_op1));
if (GET_CODE (tmp) != outer_code
- && rtx_cost (tmp, SET) < rtx_cost (x, SET))
+ && rtx_cost (tmp, SET, optimize_this_for_speed_p)
+ < rtx_cost (x, SET, optimize_this_for_speed_p))
return tmp;
return NULL_RTX;
/* If VAROP is a CONST_INT, then we need to apply the mask in CONSTOP
to VAROP and return the new constant. */
- if (GET_CODE (varop) == CONST_INT)
+ if (CONST_INT_P (varop))
return gen_int_mode (INTVAL (varop) & constop, mode);
/* See what bits may be nonzero in VAROP. Unlike the general case of
a shift, AND, or zero_extract, we can do better. */
static rtx
-reg_nonzero_bits_for_combine (rtx x, enum machine_mode mode,
- rtx known_x ATTRIBUTE_UNUSED,
+reg_nonzero_bits_for_combine (const_rtx x, enum machine_mode mode,
+ const_rtx known_x ATTRIBUTE_UNUSED,
enum machine_mode known_mode ATTRIBUTE_UNUSED,
unsigned HOST_WIDE_INT known_ret ATTRIBUTE_UNUSED,
unsigned HOST_WIDE_INT *nonzero)
{
rtx tem;
+ reg_stat_type *rsp;
/* If X is a register whose nonzero bits value is current, use it.
Otherwise, if X is a register whose value we can find, use that
value. Otherwise, use the previously-computed global nonzero bits
for this register. */
- if (reg_stat[REGNO (x)].last_set_value != 0
- && (reg_stat[REGNO (x)].last_set_mode == mode
- || (GET_MODE_CLASS (reg_stat[REGNO (x)].last_set_mode) == MODE_INT
+ rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
+ if (rsp->last_set_value != 0
+ && (rsp->last_set_mode == mode
+ || (GET_MODE_CLASS (rsp->last_set_mode) == MODE_INT
&& GET_MODE_CLASS (mode) == MODE_INT))
- && ((reg_stat[REGNO (x)].last_set_label >= label_tick_ebb_start
- && reg_stat[REGNO (x)].last_set_label < label_tick)
- || (reg_stat[REGNO (x)].last_set_label == label_tick
- && DF_INSN_LUID (reg_stat[REGNO (x)].last_set) < subst_low_luid)
+ && ((rsp->last_set_label >= label_tick_ebb_start
+ && rsp->last_set_label < label_tick)
+ || (rsp->last_set_label == label_tick
+ && DF_INSN_LUID (rsp->last_set) < subst_low_luid)
|| (REGNO (x) >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (REGNO (x)) == 1
&& !REGNO_REG_SET_P
(DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), REGNO (x)))))
{
- *nonzero &= reg_stat[REGNO (x)].last_set_nonzero_bits;
+ *nonzero &= rsp->last_set_nonzero_bits;
return NULL;
}
instead of this kludge. */
if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode)
- && GET_CODE (tem) == CONST_INT
+ && CONST_INT_P (tem)
&& INTVAL (tem) > 0
&& 0 != (INTVAL (tem)
& ((HOST_WIDE_INT) 1
#endif
return tem;
}
- else if (nonzero_sign_valid && reg_stat[REGNO (x)].nonzero_bits)
+ else if (nonzero_sign_valid && rsp->nonzero_bits)
{
- unsigned HOST_WIDE_INT mask = reg_stat[REGNO (x)].nonzero_bits;
+ unsigned HOST_WIDE_INT mask = rsp->nonzero_bits;
if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode))
/* We don't know anything about the upper bits. */
be between 1 and the number of bits in MODE. */
static rtx
-reg_num_sign_bit_copies_for_combine (rtx x, enum machine_mode mode,
- rtx known_x ATTRIBUTE_UNUSED,
+reg_num_sign_bit_copies_for_combine (const_rtx x, enum machine_mode mode,
+ const_rtx known_x ATTRIBUTE_UNUSED,
enum machine_mode known_mode
ATTRIBUTE_UNUSED,
unsigned int known_ret ATTRIBUTE_UNUSED,
unsigned int *result)
{
rtx tem;
-
- if (reg_stat[REGNO (x)].last_set_value != 0
- && reg_stat[REGNO (x)].last_set_mode == mode
- && ((reg_stat[REGNO (x)].last_set_label >= label_tick_ebb_start
- && reg_stat[REGNO (x)].last_set_label < label_tick)
- || (reg_stat[REGNO (x)].last_set_label == label_tick
- && DF_INSN_LUID (reg_stat[REGNO (x)].last_set) < subst_low_luid)
+ reg_stat_type *rsp;
+
+ rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
+ if (rsp->last_set_value != 0
+ && rsp->last_set_mode == mode
+ && ((rsp->last_set_label >= label_tick_ebb_start
+ && rsp->last_set_label < label_tick)
+ || (rsp->last_set_label == label_tick
+ && DF_INSN_LUID (rsp->last_set) < subst_low_luid)
|| (REGNO (x) >= FIRST_PSEUDO_REGISTER
&& REG_N_SETS (REGNO (x)) == 1
&& !REGNO_REG_SET_P
(DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), REGNO (x)))))
{
- *result = reg_stat[REGNO (x)].last_set_sign_bit_copies;
+ *result = rsp->last_set_sign_bit_copies;
return NULL;
}
if (tem != 0)
return tem;
- if (nonzero_sign_valid && reg_stat[REGNO (x)].sign_bit_copies != 0
+ if (nonzero_sign_valid && rsp->sign_bit_copies != 0
&& GET_MODE_BITSIZE (GET_MODE (x)) == GET_MODE_BITSIZE (mode))
- *result = reg_stat[REGNO (x)].sign_bit_copies;
+ *result = rsp->sign_bit_copies;
return NULL;
}
implies that it must be called from a define_split. */
unsigned int
-extended_count (rtx x, enum machine_mode mode, int unsignedp)
+extended_count (const_rtx x, enum machine_mode mode, int unsignedp)
{
if (nonzero_sign_valid == 0)
return 0;
&& op0 == AND)
op0 = UNKNOWN;
+ *pop0 = op0;
+
/* ??? Slightly redundant with the above mask, but not entirely.
Moving this above means we'd have to sign-extend the mode mask
for the final test. */
- const0 = trunc_int_for_mode (const0, mode);
-
- *pop0 = op0;
- *pconst0 = const0;
+ if (op0 != UNKNOWN && op0 != NEG)
+ *pconst0 = trunc_int_for_mode (const0, mode);
return 1;
}
\f
+/* A helper to simplify_shift_const_1 to determine the mode we can perform
+ the shift in. The original shift operation CODE is performed on OP in
+ ORIG_MODE. Return the wider mode MODE if we can perform the operation
+ in that mode. Return ORIG_MODE otherwise. We can also assume that the
+ result of the shift is subject to operation OUTER_CODE with operand
+ OUTER_CONST. */
+
+static enum machine_mode
+try_widen_shift_mode (enum rtx_code code, rtx op, int count,
+ enum machine_mode orig_mode, enum machine_mode mode,
+ enum rtx_code outer_code, HOST_WIDE_INT outer_const)
+{
+ if (orig_mode == mode)
+ return mode;
+ gcc_assert (GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (orig_mode));
+
+ /* In general we can't perform in wider mode for right shift and rotate. */
+ switch (code)
+ {
+ case ASHIFTRT:
+ /* We can still widen if the bits brought in from the left are identical
+ to the sign bit of ORIG_MODE. */
+ if (num_sign_bit_copies (op, mode)
+ > (unsigned) (GET_MODE_BITSIZE (mode)
+ - GET_MODE_BITSIZE (orig_mode)))
+ return mode;
+ return orig_mode;
+
+ case LSHIFTRT:
+ /* Similarly here but with zero bits. */
+ if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
+ && (nonzero_bits (op, mode) & ~GET_MODE_MASK (orig_mode)) == 0)
+ return mode;
+
+ /* We can also widen if the bits brought in will be masked off. This
+ operation is performed in ORIG_MODE. */
+ if (outer_code == AND)
+ {
+ int care_bits = low_bitmask_len (orig_mode, outer_const);
+
+ if (care_bits >= 0
+ && GET_MODE_BITSIZE (orig_mode) - care_bits >= count)
+ return mode;
+ }
+ /* fall through */
+
+ case ROTATE:
+ return orig_mode;
+
+ case ROTATERT:
+ gcc_unreachable ();
+
+ default:
+ return mode;
+ }
+}
+
/* Simplify a shift of VAROP by COUNT bits. CODE says what kind of shift.
The result of the shift is RESULT_MODE. Return NULL_RTX if we cannot
simplify it. Otherwise, return a simplified value.
enum rtx_code outer_op = UNKNOWN;
HOST_WIDE_INT outer_const = 0;
int complement_p = 0;
- rtx new, x;
+ rtx new_rtx, x;
/* Make sure and truncate the "natural" shift on the way in. We don't
want to do this inside the loop as it makes it more difficult to
if (GET_CODE (varop) == CLOBBER)
return NULL_RTX;
- /* If we discovered we had to complement VAROP, leave. Making a NOT
- here would cause an infinite loop. */
- if (complement_p)
- break;
-
/* Convert ROTATERT to ROTATE. */
if (code == ROTATERT)
{
count = bitsize - count;
}
- /* We need to determine what mode we will do the shift in. If the
- shift is a right shift or a ROTATE, we must always do it in the mode
- it was originally done in. Otherwise, we can do it in MODE, the
- widest mode encountered. */
- shift_mode
- = (code == ASHIFTRT || code == LSHIFTRT || code == ROTATE
- ? result_mode : mode);
+ shift_mode = try_widen_shift_mode (code, varop, count, result_mode,
+ mode, outer_op, outer_const);
/* Handle cases where the count is greater than the size of the mode
minus 1. For ASHIFT, use the size minus one as the count (this can
}
}
+ /* If we discovered we had to complement VAROP, leave. Making a NOT
+ here would cause an infinite loop. */
+ if (complement_p)
+ break;
+
/* An arithmetic right shift of a quantity known to be -1 or 0
is a no-op. */
if (code == ASHIFTRT
case ZERO_EXTEND:
case SIGN_EXTRACT:
case ZERO_EXTRACT:
- new = expand_compound_operation (varop);
- if (new != varop)
+ new_rtx = expand_compound_operation (varop);
+ if (new_rtx != varop)
{
- varop = new;
+ varop = new_rtx;
continue;
}
break;
&& (tmode = mode_for_size (GET_MODE_BITSIZE (mode) - count,
MODE_INT, 1)) != BLKmode)
{
- new = adjust_address_nv (varop, tmode,
+ new_rtx = adjust_address_nv (varop, tmode,
BYTES_BIG_ENDIAN ? 0
: count / BITS_PER_UNIT);
varop = gen_rtx_fmt_e (code == ASHIFTRT ? SIGN_EXTEND
- : ZERO_EXTEND, mode, new);
+ : ZERO_EXTEND, mode, new_rtx);
count = 0;
continue;
}
/* Some machines use MULT instead of ASHIFT because MULT
is cheaper. But it is still better on those machines to
merge two shifts into one. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
case UDIV:
/* Similar, for when divides are cheaper. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
case ROTATE:
/* Here we have two nested shifts. The result is usually the
AND of a new shift with a mask. We compute the result below. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& INTVAL (XEXP (varop, 1)) >= 0
&& INTVAL (XEXP (varop, 1)) < GET_MODE_BITSIZE (GET_MODE (varop))
&& GET_MODE_BITSIZE (result_mode) <= HOST_BITS_PER_WIDE_INT
/* Give up if we can't compute an outer operation to use. */
if (mask_rtx == 0
- || GET_CODE (mask_rtx) != CONST_INT
+ || !CONST_INT_P (mask_rtx)
|| ! merge_outer_ops (&outer_op, &outer_const, AND,
INTVAL (mask_rtx),
result_mode, &complement_p))
B is not a constant. */
else if (GET_CODE (varop) == code
- && GET_CODE (XEXP (varop, 0)) == CONST_INT
- && GET_CODE (XEXP (varop, 1)) != CONST_INT)
+ && CONST_INT_P (XEXP (varop, 0))
+ && !CONST_INT_P (XEXP (varop, 1)))
{
- rtx new = simplify_const_binary_operation (code, mode,
+ rtx new_rtx = simplify_const_binary_operation (code, mode,
XEXP (varop, 0),
GEN_INT (count));
- varop = gen_rtx_fmt_ee (code, mode, new, XEXP (varop, 1));
+ varop = gen_rtx_fmt_ee (code, mode, new_rtx, XEXP (varop, 1));
count = 0;
continue;
}
break;
case NOT:
+ if (VECTOR_MODE_P (mode))
+ break;
+
/* Make this fit the case below. */
varop = gen_rtx_XOR (mode, XEXP (varop, 0),
GEN_INT (GET_MODE_MASK (mode)));
what a ZERO_EXTRACT looks like. Also, some machines have
(and (shift)) insns. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
/* We can't do this if we have (ashiftrt (xor)) and the
constant has its sign bit set in shift_mode. */
&& !(code == ASHIFTRT && GET_CODE (varop) == XOR
&& 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
shift_mode))
- && (new = simplify_const_binary_operation (code, result_mode,
+ && (new_rtx = simplify_const_binary_operation (code, result_mode,
XEXP (varop, 1),
GEN_INT (count))) != 0
- && GET_CODE (new) == CONST_INT
+ && CONST_INT_P (new_rtx)
&& merge_outer_ops (&outer_op, &outer_const, GET_CODE (varop),
- INTVAL (new), result_mode, &complement_p))
+ INTVAL (new_rtx), result_mode, &complement_p))
{
varop = XEXP (varop, 0);
continue;
logical expression, make a new logical expression, and apply
the inverse distributive law. This also can't be done
for some (ashiftrt (xor)). */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& !(code == ASHIFTRT && GET_CODE (varop) == XOR
&& 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
shift_mode)))
/* (ashift (plus foo C) N) is (plus (ashift foo N) C'). */
if (code == ASHIFT
- && GET_CODE (XEXP (varop, 1)) == CONST_INT
- && (new = simplify_const_binary_operation (ASHIFT, result_mode,
+ && CONST_INT_P (XEXP (varop, 1))
+ && (new_rtx = simplify_const_binary_operation (ASHIFT, result_mode,
XEXP (varop, 1),
GEN_INT (count))) != 0
- && GET_CODE (new) == CONST_INT
+ && CONST_INT_P (new_rtx)
&& merge_outer_ops (&outer_op, &outer_const, PLUS,
- INTVAL (new), result_mode, &complement_p))
+ INTVAL (new_rtx), result_mode, &complement_p))
{
varop = XEXP (varop, 0);
continue;
leg for shift(logical). See details in logical handling above
for reasoning in doing so. */
if (code == LSHIFTRT
- && GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (varop, 1))
&& mode_signbit_p (result_mode, XEXP (varop, 1))
- && (new = simplify_const_binary_operation (code, result_mode,
+ && (new_rtx = simplify_const_binary_operation (code, result_mode,
XEXP (varop, 1),
GEN_INT (count))) != 0
- && GET_CODE (new) == CONST_INT
+ && CONST_INT_P (new_rtx)
&& merge_outer_ops (&outer_op, &outer_const, XOR,
- INTVAL (new), result_mode, &complement_p))
+ INTVAL (new_rtx), result_mode, &complement_p))
{
varop = XEXP (varop, 0);
continue;
&& GET_CODE (XEXP (varop, 0)) == ASHIFTRT
&& count == (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
&& (code == LSHIFTRT || code == ASHIFTRT)
- && GET_CODE (XEXP (XEXP (varop, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (varop, 0), 1))
&& INTVAL (XEXP (XEXP (varop, 0), 1)) == count
&& rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
{
if the truncate does not affect the value. */
if (code == LSHIFTRT
&& GET_CODE (XEXP (varop, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (varop, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (varop, 0), 1))
&& (INTVAL (XEXP (XEXP (varop, 0), 1))
>= (GET_MODE_BITSIZE (GET_MODE (XEXP (varop, 0)))
- GET_MODE_BITSIZE (GET_MODE (varop)))))
break;
}
- /* We need to determine what mode to do the shift in. If the shift is
- a right shift or ROTATE, we must always do it in the mode it was
- originally done in. Otherwise, we can do it in MODE, the widest mode
- encountered. The code we care about is that of the shift that will
- actually be done, not the shift that was originally requested. */
- shift_mode
- = (code == ASHIFTRT || code == LSHIFTRT || code == ROTATE
- ? result_mode : mode);
+ shift_mode = try_widen_shift_mode (code, varop, count, result_mode, mode,
+ outer_op, outer_const);
/* We have now finished analyzing the shift. The result should be
a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
if (outer_op != UNKNOWN)
{
- if (GET_MODE_BITSIZE (result_mode) < HOST_BITS_PER_WIDE_INT)
+ if (GET_RTX_CLASS (outer_op) != RTX_UNARY
+ && GET_MODE_BITSIZE (result_mode) < HOST_BITS_PER_WIDE_INT)
outer_const = trunc_int_for_mode (outer_const, result_mode);
if (outer_op == AND)
REG_NOTES (insn) = 0;
insn_code_number = recog (pat, insn, &num_clobbers_to_add);
+ if (dump_file && (dump_flags & TDF_DETAILS))
+ {
+ if (insn_code_number < 0)
+ fputs ("Failed to match this instruction:\n", dump_file);
+ else
+ fputs ("Successfully matched this instruction:\n", dump_file);
+ print_rtl_single (dump_file, pat);
+ }
/* If it isn't, there is the possibility that we previously had an insn
that clobbered some register as a side effect, but the combined
PATTERN (insn) = pat;
insn_code_number = recog (pat, insn, &num_clobbers_to_add);
+ if (dump_file && (dump_flags & TDF_DETAILS))
+ {
+ if (insn_code_number < 0)
+ fputs ("Failed to match this instruction:\n", dump_file);
+ else
+ fputs ("Successfully matched this instruction:\n", dump_file);
+ print_rtl_single (dump_file, pat);
+ }
}
PATTERN (insn) = old_pat;
REG_NOTES (insn) = old_notes;
if (REG_P (XEXP (XVECEXP (newpat, 0, i), 0))
&& ! reg_dead_at_p (XEXP (XVECEXP (newpat, 0, i), 0), insn))
return -1;
- if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) != SCRATCH)
+ if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) != SCRATCH)
{
gcc_assert (REG_P (XEXP (XVECEXP (newpat, 0, i), 0)));
- notes = gen_rtx_EXPR_LIST (REG_UNUSED,
- XEXP (XVECEXP (newpat, 0, i), 0), notes);
+ notes = alloc_reg_note (REG_UNUSED,
+ XEXP (XVECEXP (newpat, 0, i), 0), notes);
}
}
pat = newpat;
constant integer or has a mode the same size. */
if (GET_MODE_SIZE (omode) > UNITS_PER_WORD
&& ! ((imode == VOIDmode
- && (GET_CODE (x) == CONST_INT
+ && (CONST_INT_P (x)
|| GET_CODE (x) == CONST_DOUBLE))
|| isize == osize))
goto fail;
}
fail:
- return gen_rtx_CLOBBER (imode, const0_rtx);
+ return gen_rtx_CLOBBER (omode, const0_rtx);
}
\f
/* Simplify a comparison between *POP0 and *POP1 where CODE is the
&& GET_CODE (XEXP (XEXP (op1, 0), 0)) == SUBREG
&& (GET_MODE (SUBREG_REG (XEXP (XEXP (op0, 0), 0)))
== GET_MODE (SUBREG_REG (XEXP (XEXP (op1, 0), 0))))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& XEXP (op0, 1) == XEXP (op1, 1)
&& XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
&& XEXP (op0, 1) == XEXP (XEXP (op1, 0), 1)
|| (GET_CODE (op0) == ASHIFTRT
&& (code != GTU && code != LTU
&& code != GEU && code != LEU)))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& INTVAL (XEXP (op0, 1)) >= 0
&& INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT
&& XEXP (op0, 1) == XEXP (op1, 1))
present. */
else if (GET_CODE (op0) == AND && GET_CODE (op1) == AND
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
- && GET_CODE (XEXP (op1, 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (op0, 1))
+ && CONST_INT_P (XEXP (op1, 1)))
{
rtx inner_op0 = XEXP (op0, 0);
rtx inner_op1 = XEXP (op1, 0);
but some things may really be comparisons with zero but not start
out looking that way. */
- while (GET_CODE (op1) == CONST_INT)
+ while (CONST_INT_P (op1))
{
enum machine_mode mode = GET_MODE (op0);
unsigned int mode_width = GET_MODE_BITSIZE (mode);
/* Except we can't if SHIFT_COUNT_TRUNCATED is set, since we might
have already reduced the shift count modulo the word size. */
if (!SHIFT_COUNT_TRUNCATED
- && GET_CODE (XEXP (op0, 0)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 0))
&& XEXP (op0, 1) == const1_rtx
&& equality_comparison_p && const_op == 0
&& (i = exact_log2 (INTVAL (XEXP (op0, 0)))) >= 0)
case ROTATE:
/* If we are testing equality and our count is a constant, we
can perform the inverse operation on our RHS. */
- if (equality_comparison_p && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (equality_comparison_p && CONST_INT_P (XEXP (op0, 1))
&& (tem = simplify_binary_operation (ROTATERT, mode,
op1, XEXP (op0, 1))) != 0)
{
a particular bit. Convert it to an AND of a constant of that
bit. This will be converted into a ZERO_EXTRACT. */
if (const_op == 0 && sign_bit_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT)
{
op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0),
&& ((unsigned HOST_WIDE_INT) const_op
< (((unsigned HOST_WIDE_INT) 1
<< (GET_MODE_BITSIZE (mode) - 1))))
- && cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
+ && have_insn_for (COMPARE, mode))
{
op0 = XEXP (op0, 0);
continue;
&& subreg_lowpart_p (op0)
&& GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0))) > mode_width
&& GET_CODE (SUBREG_REG (op0)) == PLUS
- && GET_CODE (XEXP (SUBREG_REG (op0), 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (SUBREG_REG (op0), 1)))
{
enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0));
rtx a = XEXP (SUBREG_REG (op0), 0);
&& (unsigned_comparison_p || equality_comparison_p)
&& (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
&& ((unsigned HOST_WIDE_INT) const_op < GET_MODE_MASK (mode))
- && cmp_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
+ && have_insn_for (COMPARE, mode))
{
op0 = XEXP (op0, 0);
continue;
/* The sign bit of (minus (ashiftrt X C) X), where C is the number
of bits in X minus 1, is one iff X > 0. */
if (sign_bit_comparison_p && GET_CODE (XEXP (op0, 0)) == ASHIFTRT
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
&& (unsigned HOST_WIDE_INT) INTVAL (XEXP (XEXP (op0, 0), 1))
== mode_width - 1
&& rtx_equal_p (XEXP (XEXP (op0, 0), 0), XEXP (op0, 1)))
in STORE_FLAG_VALUE, we can compare with X. */
if (const_op == 0 && equality_comparison_p
&& mode_width <= HOST_BITS_PER_WIDE_INT
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& GET_CODE (XEXP (op0, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
&& INTVAL (XEXP (XEXP (op0, 0), 1)) >= 0
&& INTVAL (XEXP (XEXP (op0, 0), 1)) < HOST_BITS_PER_WIDE_INT)
{
the underlying value. */
if (equality_comparison_p
&& const_op == 0
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT
&& ((INTVAL (XEXP (op0, 1)) & GET_MODE_MASK (mode))
== (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)))
known to hold a value of the required mode the
transformation is invalid. */
if ((equality_comparison_p || unsigned_comparison_p)
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& (i = exact_log2 ((INTVAL (XEXP (op0, 1))
& GET_MODE_MASK (mode))
+ 1)) >= 0
#endif
|| (mode_width <= GET_MODE_BITSIZE (tmode)
&& subreg_lowpart_p (XEXP (op0, 0))))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT
&& GET_MODE_BITSIZE (tmode) <= HOST_BITS_PER_WIDE_INT
&& ((c1 = INTVAL (XEXP (op0, 1))) & ~mask) == 0
if (GET_CODE (shift_op) == NOT
|| (GET_CODE (shift_op) == XOR
- && GET_CODE (XEXP (shift_op, 1)) == CONST_INT
- && GET_CODE (shift_count) == CONST_INT
+ && CONST_INT_P (XEXP (shift_op, 1))
+ && CONST_INT_P (shift_count)
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& (INTVAL (XEXP (shift_op, 1))
== (HOST_WIDE_INT) 1 << INTVAL (shift_count))))
are known to be zero, we can do this by comparing FOO with C
shifted right N bits so long as the low-order N bits of C are
zero. */
- if (GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (op0, 1))
&& INTVAL (XEXP (op0, 1)) >= 0
&& ((INTVAL (XEXP (op0, 1)) + ! equality_comparison_p)
< HOST_BITS_PER_WIDE_INT)
/* If we are doing a sign bit comparison, it means we are testing
a particular bit. Convert it to the appropriate AND. */
- if (sign_bit_comparison_p && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (sign_bit_comparison_p && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT)
{
op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0),
the low bit to the sign bit, we can convert this to an AND of the
low-order bit. */
if (const_op == 0 && equality_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& (unsigned HOST_WIDE_INT) INTVAL (XEXP (op0, 1))
== mode_width - 1)
{
/* If this is an equality comparison with zero, we can do this
as a logical shift, which might be much simpler. */
if (equality_comparison_p && const_op == 0
- && GET_CODE (XEXP (op0, 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (op0, 1)))
{
op0 = simplify_shift_const (NULL_RTX, LSHIFTRT, mode,
XEXP (op0, 0),
/* If OP0 is a sign extension and CODE is not an unsigned comparison,
do the comparison in a narrower mode. */
if (! unsigned_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& GET_CODE (XEXP (op0, 0)) == ASHIFT
&& XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
&& (tmode = mode_for_size (mode_width - INTVAL (XEXP (op0, 1)),
constant, which is usually represented with the PLUS
between the shifts. */
if (! unsigned_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& GET_CODE (XEXP (op0, 0)) == PLUS
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
&& GET_CODE (XEXP (XEXP (op0, 0), 0)) == ASHIFT
&& XEXP (op0, 1) == XEXP (XEXP (XEXP (op0, 0), 0), 1)
&& (tmode = mode_for_size (mode_width - INTVAL (XEXP (op0, 1)),
the low order N bits of FOO are known to be zero, we can do this
by comparing FOO with C shifted left N bits so long as no
overflow occurs. */
- if (GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (op0, 1))
&& INTVAL (XEXP (op0, 1)) >= 0
&& INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT
&& mode_width <= HOST_BITS_PER_WIDE_INT
can replace this with an LT or GE comparison. */
if (const_op == 0
&& (equality_comparison_p || sign_bit_comparison_p)
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& (unsigned HOST_WIDE_INT) INTVAL (XEXP (op0, 1))
== mode_width - 1)
{
{
int zero_extended;
+ /* If this is a test for negative, we can make an explicit
+ test of the sign bit. Test this first so we can use
+ a paradoxical subreg to extend OP0. */
+
+ if (op1 == const0_rtx && (code == LT || code == GE)
+ && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
+ {
+ op0 = simplify_gen_binary (AND, tmode,
+ gen_lowpart (tmode, op0),
+ GEN_INT ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode)
+ - 1)));
+ code = (code == LT) ? NE : EQ;
+ break;
+ }
+
/* If the only nonzero bits in OP0 and OP1 are those in the
narrower mode and this is an equality or unsigned comparison,
we can use the wider mode. Similarly for sign-extended
|| code == LEU || code == LTU)
&& (nonzero_bits (op0, tmode)
& ~GET_MODE_MASK (mode)) == 0
- && ((GET_CODE (op1) == CONST_INT
+ && ((CONST_INT_P (op1)
|| (nonzero_bits (op1, tmode)
& ~GET_MODE_MASK (mode)) == 0)));
XEXP (op0, 0)),
gen_lowpart (tmode,
XEXP (op0, 1)));
-
- op0 = gen_lowpart (tmode, op0);
- if (zero_extended && GET_CODE (op1) == CONST_INT)
- op1 = GEN_INT (INTVAL (op1) & GET_MODE_MASK (mode));
- op1 = gen_lowpart (tmode, op1);
- break;
- }
-
- /* If this is a test for negative, we can make an explicit
- test of the sign bit. */
-
- if (op1 == const0_rtx && (code == LT || code == GE)
- && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
- {
- op0 = simplify_gen_binary (AND, tmode,
- gen_lowpart (tmode, op0),
- GEN_INT ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (mode)
- - 1)));
- code = (code == LT) ? NE : EQ;
- break;
+ else
+ {
+ if (zero_extended)
+ {
+ op0 = simplify_gen_unary (ZERO_EXTEND, tmode, op0, mode);
+ op1 = simplify_gen_unary (ZERO_EXTEND, tmode, op1, mode);
+ }
+ else
+ {
+ op0 = simplify_gen_unary (SIGN_EXTEND, tmode, op0, mode);
+ op1 = simplify_gen_unary (SIGN_EXTEND, tmode, op1, mode);
+ }
+ break;
+ }
}
}
{
enum rtx_code code = GET_CODE (x);
const char *fmt;
- int i, ret = 1;
+ int i, j, ret = 1;
if (GET_RTX_CLASS (code) == '2'
|| GET_RTX_CLASS (code) == 'c')
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
if (fmt[i] == 'e')
ret += count_rtxs (XEXP (x, i));
+ else if (fmt[i] == 'E')
+ for (j = 0; j < XVECLEN (x, i); j++)
+ ret += count_rtxs (XVECEXP (x, i, j));
return ret;
}
{
enum rtx_code code = GET_CODE (x);
const char *fmt = GET_RTX_FORMAT (code);
- int i;
+ int i, j;
if (code == REG)
{
unsigned int r;
for (r = regno; r < endregno; r++)
- reg_stat[r].last_set_table_tick = label_tick;
+ {
+ reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, r);
+ rsp->last_set_table_tick = label_tick;
+ }
return;
}
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- /* Note that we can't have an "E" in values stored; see
- get_last_value_validate. */
if (fmt[i] == 'e')
{
/* Check for identical subexpressions. If x contains
update_table_tick (XEXP (x, i));
}
+ else if (fmt[i] == 'E')
+ for (j = 0; j < XVECLEN (x, i); j++)
+ update_table_tick (XVECEXP (x, i, j));
}
/* Record that REG is set to VALUE in insn INSN. If VALUE is zero, we
unsigned int regno = REGNO (reg);
unsigned int endregno = END_REGNO (reg);
unsigned int i;
+ reg_stat_type *rsp;
/* If VALUE contains REG and we have a previous value for REG, substitute
the previous value. */
register. */
for (i = regno; i < endregno; i++)
{
+ rsp = VEC_index (reg_stat_type, reg_stat, i);
+
if (insn)
- reg_stat[i].last_set = insn;
+ rsp->last_set = insn;
- reg_stat[i].last_set_value = 0;
- reg_stat[i].last_set_mode = 0;
- reg_stat[i].last_set_nonzero_bits = 0;
- reg_stat[i].last_set_sign_bit_copies = 0;
- reg_stat[i].last_death = 0;
- reg_stat[i].truncated_to_mode = 0;
+ rsp->last_set_value = 0;
+ rsp->last_set_mode = VOIDmode;
+ rsp->last_set_nonzero_bits = 0;
+ rsp->last_set_sign_bit_copies = 0;
+ rsp->last_death = 0;
+ rsp->truncated_to_mode = VOIDmode;
}
/* Mark registers that are being referenced in this value. */
for (i = regno; i < endregno; i++)
{
- reg_stat[i].last_set_label = label_tick;
+ rsp = VEC_index (reg_stat_type, reg_stat, i);
+ rsp->last_set_label = label_tick;
if (!insn
- || (value && reg_stat[i].last_set_table_tick >= label_tick_ebb_start))
- reg_stat[i].last_set_invalid = 1;
+ || (value && rsp->last_set_table_tick >= label_tick_ebb_start))
+ rsp->last_set_invalid = 1;
else
- reg_stat[i].last_set_invalid = 0;
+ rsp->last_set_invalid = 0;
}
/* The value being assigned might refer to X (like in "x++;"). In that
case, we must replace it with (clobber (const_int 0)) to prevent
infinite loops. */
- if (value && ! get_last_value_validate (&value, insn,
- reg_stat[regno].last_set_label, 0))
+ rsp = VEC_index (reg_stat_type, reg_stat, regno);
+ if (value && !get_last_value_validate (&value, insn, label_tick, 0))
{
value = copy_rtx (value);
- if (! get_last_value_validate (&value, insn,
- reg_stat[regno].last_set_label, 1))
+ if (!get_last_value_validate (&value, insn, label_tick, 1))
value = 0;
}
/* For the main register being modified, update the value, the mode, the
nonzero bits, and the number of sign bit copies. */
- reg_stat[regno].last_set_value = value;
+ rsp->last_set_value = value;
if (value)
{
enum machine_mode mode = GET_MODE (reg);
subst_low_luid = DF_INSN_LUID (insn);
- reg_stat[regno].last_set_mode = mode;
+ rsp->last_set_mode = mode;
if (GET_MODE_CLASS (mode) == MODE_INT
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
mode = nonzero_bits_mode;
- reg_stat[regno].last_set_nonzero_bits = nonzero_bits (value, mode);
- reg_stat[regno].last_set_sign_bit_copies
+ rsp->last_set_nonzero_bits = nonzero_bits (value, mode);
+ rsp->last_set_sign_bit_copies
= num_sign_bit_copies (value, GET_MODE (reg));
}
}
set is occurring. */
static void
-record_dead_and_set_regs_1 (rtx dest, rtx setter, void *data)
+record_dead_and_set_regs_1 (rtx dest, const_rtx setter, void *data)
{
rtx record_dead_insn = (rtx) data;
unsigned int endregno = END_REGNO (XEXP (link, 0));
for (i = regno; i < endregno; i++)
- reg_stat[i].last_death = insn;
+ {
+ reg_stat_type *rsp;
+
+ rsp = VEC_index (reg_stat_type, reg_stat, i);
+ rsp->last_death = insn;
+ }
}
else if (REG_NOTE_KIND (link) == REG_INC)
record_value_for_reg (XEXP (link, 0), insn, NULL_RTX);
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i))
{
- reg_stat[i].last_set_invalid = 1;
- reg_stat[i].last_set = insn;
- reg_stat[i].last_set_value = 0;
- reg_stat[i].last_set_mode = 0;
- reg_stat[i].last_set_nonzero_bits = 0;
- reg_stat[i].last_set_sign_bit_copies = 0;
- reg_stat[i].last_death = 0;
- reg_stat[i].truncated_to_mode = 0;
+ reg_stat_type *rsp;
+
+ rsp = VEC_index (reg_stat_type, reg_stat, i);
+ rsp->last_set_invalid = 1;
+ rsp->last_set = insn;
+ rsp->last_set_value = 0;
+ rsp->last_set_mode = VOIDmode;
+ rsp->last_set_nonzero_bits = 0;
+ rsp->last_set_sign_bit_copies = 0;
+ rsp->last_death = 0;
+ rsp->truncated_to_mode = VOIDmode;
}
last_call_luid = mem_last_set = DF_INSN_LUID (insn);
for (links = LOG_LINKS (insn); links;)
{
+ reg_stat_type *rsp;
+
insn = XEXP (links, 0);
set = single_set (insn);
continue;
}
- if (reg_stat[regno].last_set == insn)
+ rsp = VEC_index (reg_stat_type, reg_stat, regno);
+ if (rsp->last_set == insn)
{
if (SUBREG_PROMOTED_UNSIGNED_P (subreg) > 0)
- reg_stat[regno].last_set_nonzero_bits &= GET_MODE_MASK (mode);
+ rsp->last_set_nonzero_bits &= GET_MODE_MASK (mode);
}
if (REG_P (SET_SRC (set)))
an explicit truncation. */
static bool
-reg_truncated_to_mode (enum machine_mode mode, rtx x)
+reg_truncated_to_mode (enum machine_mode mode, const_rtx x)
{
- enum machine_mode truncated = reg_stat[REGNO (x)].truncated_to_mode;
+ reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
+ enum machine_mode truncated = rsp->truncated_to_mode;
if (truncated == 0
- || reg_stat[REGNO (x)].truncation_label < label_tick_ebb_start)
+ || rsp->truncation_label < label_tick_ebb_start)
return false;
if (GET_MODE_SIZE (truncated) <= GET_MODE_SIZE (mode))
return true;
return false;
}
-/* X is a REG or a SUBREG. If X is some sort of a truncation record
- it. For non-TRULY_NOOP_TRUNCATION targets we might be able to turn
- a truncate into a subreg using this information. */
+/* Callback for for_each_rtx. If *P is a hard reg or a subreg record the mode
+ that the register is accessed in. For non-TRULY_NOOP_TRUNCATION targets we
+ might be able to turn a truncate into a subreg using this information.
+ Return -1 if traversing *P is complete or 0 otherwise. */
-static void
-record_truncated_value (rtx x)
+static int
+record_truncated_value (rtx *p, void *data ATTRIBUTE_UNUSED)
{
+ rtx x = *p;
enum machine_mode truncated_mode;
+ reg_stat_type *rsp;
if (GET_CODE (x) == SUBREG && REG_P (SUBREG_REG (x)))
{
truncated_mode = GET_MODE (x);
if (GET_MODE_SIZE (original_mode) <= GET_MODE_SIZE (truncated_mode))
- return;
+ return -1;
if (TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (truncated_mode),
GET_MODE_BITSIZE (original_mode)))
- return;
+ return -1;
x = SUBREG_REG (x);
}
else if (REG_P (x) && REGNO (x) < FIRST_PSEUDO_REGISTER)
truncated_mode = GET_MODE (x);
else
- return;
+ return 0;
- if (reg_stat[REGNO (x)].truncated_to_mode == 0
- || reg_stat[REGNO (x)].truncation_label < label_tick_ebb_start
+ rsp = VEC_index (reg_stat_type, reg_stat, REGNO (x));
+ if (rsp->truncated_to_mode == 0
+ || rsp->truncation_label < label_tick_ebb_start
|| (GET_MODE_SIZE (truncated_mode)
- < GET_MODE_SIZE (reg_stat[REGNO (x)].truncated_to_mode)))
+ < GET_MODE_SIZE (rsp->truncated_to_mode)))
{
- reg_stat[REGNO (x)].truncated_to_mode = truncated_mode;
- reg_stat[REGNO (x)].truncation_label = label_tick;
+ rsp->truncated_to_mode = truncated_mode;
+ rsp->truncation_label = label_tick;
}
+
+ return -1;
}
-/* Scan X for promoted SUBREGs and truncated REGs. For each one
- found, note what it implies to the registers used in it. */
+/* Callback for note_uses. Find hardregs and subregs of pseudos and
+ the modes they are used in. This can help truning TRUNCATEs into
+ SUBREGs. */
static void
-check_conversions (rtx insn, rtx x)
+record_truncated_values (rtx *x, void *data ATTRIBUTE_UNUSED)
{
- if (GET_CODE (x) == SUBREG || REG_P (x))
- {
- if (GET_CODE (x) == SUBREG
- && SUBREG_PROMOTED_VAR_P (x)
- && REG_P (SUBREG_REG (x)))
- record_promoted_value (insn, x);
+ for_each_rtx (x, record_truncated_value, NULL);
+}
- record_truncated_value (x);
- }
+/* Scan X for promoted SUBREGs. For each one found,
+ note what it implies to the registers used in it. */
+
+static void
+check_promoted_subreg (rtx insn, rtx x)
+{
+ if (GET_CODE (x) == SUBREG
+ && SUBREG_PROMOTED_VAR_P (x)
+ && REG_P (SUBREG_REG (x)))
+ record_promoted_value (insn, x);
else
{
const char *format = GET_RTX_FORMAT (GET_CODE (x));
switch (format[i])
{
case 'e':
- check_conversions (insn, XEXP (x, i));
+ check_promoted_subreg (insn, XEXP (x, i));
break;
case 'V':
case 'E':
if (XVEC (x, i) != 0)
for (j = 0; j < XVECLEN (x, i); j++)
- check_conversions (insn, XVECEXP (x, i, j));
+ check_promoted_subreg (insn, XVECEXP (x, i, j));
break;
}
}
}
\f
-/* Utility routine for the following function. Verify that all the registers
- mentioned in *LOC are valid when *LOC was part of a value set when
- label_tick == TICK. Return 0 if some are not.
-
- If REPLACE is nonzero, replace the invalid reference with
- (clobber (const_int 0)) and return 1. This replacement is useful because
- we often can get useful information about the form of a value (e.g., if
- it was produced by a shift that always produces -1 or 0) even though
- we don't know exactly what registers it was produced from. */
+/* Verify that all the registers and memory references mentioned in *LOC are
+ still valid. *LOC was part of a value set in INSN when label_tick was
+ equal to TICK. Return 0 if some are not. If REPLACE is nonzero, replace
+ the invalid references with (clobber (const_int 0)) and return 1. This
+ replacement is useful because we often can get useful information about
+ the form of a value (e.g., if it was produced by a shift that always
+ produces -1 or 0) even though we don't know exactly what registers it
+ was produced from. */
static int
get_last_value_validate (rtx *loc, rtx insn, int tick, int replace)
rtx x = *loc;
const char *fmt = GET_RTX_FORMAT (GET_CODE (x));
int len = GET_RTX_LENGTH (GET_CODE (x));
- int i;
+ int i, j;
if (REG_P (x))
{
unsigned int j;
for (j = regno; j < endregno; j++)
- if (reg_stat[j].last_set_invalid
- /* If this is a pseudo-register that was only set once and not
- live at the beginning of the function, it is always valid. */
- || (! (regno >= FIRST_PSEUDO_REGISTER
- && REG_N_SETS (regno) == 1
- && !REGNO_REG_SET_P
- (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), regno))
- && reg_stat[j].last_set_label > tick))
+ {
+ reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, j);
+ if (rsp->last_set_invalid
+ /* If this is a pseudo-register that was only set once and not
+ live at the beginning of the function, it is always valid. */
+ || (! (regno >= FIRST_PSEUDO_REGISTER
+ && REG_N_SETS (regno) == 1
+ && (!REGNO_REG_SET_P
+ (DF_LR_IN (ENTRY_BLOCK_PTR->next_bb), regno)))
+ && rsp->last_set_label > tick))
{
if (replace)
*loc = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
return replace;
}
+ }
return 1;
}
- /* If this is a memory reference, make sure that there were
- no stores after it that might have clobbered the value. We don't
- have alias info, so we assume any store invalidates it. */
+ /* If this is a memory reference, make sure that there were no stores after
+ it that might have clobbered the value. We don't have alias info, so we
+ assume any store invalidates it. Moreover, we only have local UIDs, so
+ we also assume that there were stores in the intervening basic blocks. */
else if (MEM_P (x) && !MEM_READONLY_P (x)
- && DF_INSN_LUID (insn) <= mem_last_set)
+ && (tick != label_tick || DF_INSN_LUID (insn) <= mem_last_set))
{
if (replace)
*loc = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
replace) == 0)
return 0;
}
- /* Don't bother with these. They shouldn't occur anyway. */
else if (fmt[i] == 'E')
- return 0;
+ for (j = 0; j < XVECLEN (x, i); j++)
+ if (get_last_value_validate (&XVECEXP (x, i, j),
+ insn, tick, replace) == 0)
+ return 0;
}
/* If we haven't found a reason for it to be invalid, it is valid. */
is known longer known reliably. */
static rtx
-get_last_value (rtx x)
+get_last_value (const_rtx x)
{
unsigned int regno;
rtx value;
+ reg_stat_type *rsp;
/* If this is a non-paradoxical SUBREG, get the value of its operand and
then convert it to the desired mode. If this is a paradoxical SUBREG,
return 0;
regno = REGNO (x);
- value = reg_stat[regno].last_set_value;
+ rsp = VEC_index (reg_stat_type, reg_stat, regno);
+ value = rsp->last_set_value;
/* If we don't have a value, or if it isn't for this basic block and
it's either a hard register, set more than once, or it's a live
block. */
if (value == 0
- || (reg_stat[regno].last_set_label < label_tick_ebb_start
+ || (rsp->last_set_label < label_tick_ebb_start
&& (regno < FIRST_PSEUDO_REGISTER
|| REG_N_SETS (regno) != 1
|| REGNO_REG_SET_P
/* If the value was set in a later insn than the ones we are processing,
we can't use it even if the register was only set once. */
- if (reg_stat[regno].last_set_label == label_tick
- && DF_INSN_LUID (reg_stat[regno].last_set) >= subst_low_luid)
+ if (rsp->last_set_label == label_tick
+ && DF_INSN_LUID (rsp->last_set) >= subst_low_luid)
return 0;
/* If the value has all its registers valid, return it. */
- if (get_last_value_validate (&value, reg_stat[regno].last_set,
- reg_stat[regno].last_set_label, 0))
+ if (get_last_value_validate (&value, rsp->last_set, rsp->last_set_label, 0))
return value;
/* Otherwise, make a copy and replace any invalid register with
(clobber (const_int 0)). If that fails for some reason, return 0. */
value = copy_rtx (value);
- if (get_last_value_validate (&value, reg_stat[regno].last_set,
- reg_stat[regno].last_set_label, 1))
+ if (get_last_value_validate (&value, rsp->last_set, rsp->last_set_label, 1))
return value;
return 0;
that is set in an instruction more recent than FROM_LUID. */
static int
-use_crosses_set_p (rtx x, int from_luid)
+use_crosses_set_p (const_rtx x, int from_luid)
{
const char *fmt;
int i;
return 1;
#endif
for (; regno < endreg; regno++)
- if (reg_stat[regno].last_set
- && reg_stat[regno].last_set_label == label_tick
- && DF_INSN_LUID (reg_stat[regno].last_set) > from_luid)
- return 1;
+ {
+ reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, regno);
+ if (rsp->last_set
+ && rsp->last_set_label == label_tick
+ && DF_INSN_LUID (rsp->last_set) > from_luid)
+ return 1;
+ }
return 0;
}
reg_dead_flag to 1 if X is a CLOBBER and to -1 it is a SET. */
static void
-reg_dead_at_p_1 (rtx dest, rtx x, void *data ATTRIBUTE_UNUSED)
+reg_dead_at_p_1 (rtx dest, const_rtx x, void *data ATTRIBUTE_UNUSED)
{
unsigned int regno, endregno;
return 0;
}
- /* Scan backwards until we find a REG_DEAD note, SET, CLOBBER, label, or
- beginning of function. */
- for (; insn && !LABEL_P (insn) && !BARRIER_P (insn);
- insn = prev_nonnote_insn (insn))
+ /* Scan backwards until we find a REG_DEAD note, SET, CLOBBER, or
+ beginning of basic block. */
+ block = BLOCK_FOR_INSN (insn);
+ for (;;)
{
- note_stores (PATTERN (insn), reg_dead_at_p_1, NULL);
- if (reg_dead_flag)
- return reg_dead_flag == 1 ? 1 : 0;
+ if (INSN_P (insn))
+ {
+ note_stores (PATTERN (insn), reg_dead_at_p_1, NULL);
+ if (reg_dead_flag)
+ return reg_dead_flag == 1 ? 1 : 0;
- if (find_regno_note (insn, REG_DEAD, reg_dead_regno))
- return 1;
- }
+ if (find_regno_note (insn, REG_DEAD, reg_dead_regno))
+ return 1;
+ }
- /* Get the basic block that we were in. */
- if (insn == 0)
- block = ENTRY_BLOCK_PTR->next_bb;
- else
- {
- FOR_EACH_BB (block)
- if (insn == BB_HEAD (block))
- break;
+ if (insn == BB_HEAD (block))
+ break;
- if (block == EXIT_BLOCK_PTR)
- return 0;
+ insn = PREV_INSN (insn);
}
+ /* Look at live-in sets for the basic block that we were in. */
for (i = reg_dead_regno; i < reg_dead_endregno; i++)
if (REGNO_REG_SET_P (df_get_live_in (block), i))
return 0;
if (code == REG)
{
unsigned int regno = REGNO (x);
- rtx where_dead = reg_stat[regno].last_death;
+ rtx where_dead = VEC_index (reg_stat_type, reg_stat, regno)->last_death;
/* Don't move the register if it gets killed in between from and to. */
if (maybe_kill_insn && reg_set_p (x, maybe_kill_insn)
return;
if (where_dead
+ && BLOCK_FOR_INSN (where_dead) == BLOCK_FOR_INSN (to_insn)
&& DF_INSN_LUID (where_dead) >= from_luid
&& DF_INSN_LUID (where_dead) < DF_INSN_LUID (to_insn))
{
for (i = deadregno; i < deadend; i++)
if (i < regno || i >= ourend)
- REG_NOTES (where_dead)
- = gen_rtx_EXPR_LIST (REG_DEAD,
- regno_reg_rtx[i],
- REG_NOTES (where_dead));
+ add_reg_note (where_dead, REG_DEAD, regno_reg_rtx[i]);
}
/* If we didn't find any note, or if we found a REG_DEAD note that
*pnotes = note;
}
else
- *pnotes = gen_rtx_EXPR_LIST (REG_DEAD, x, *pnotes);
+ *pnotes = alloc_reg_note (REG_DEAD, x, *pnotes);
}
return;
return 0;
}
+
+/* Return the next insn after INSN that is neither a NOTE nor a
+ DEBUG_INSN. This routine does not look inside SEQUENCEs. */
+
+static rtx
+next_nonnote_nondebug_insn (rtx insn)
+{
+ while (insn)
+ {
+ insn = NEXT_INSN (insn);
+ if (insn == 0)
+ break;
+ if (NOTE_P (insn))
+ continue;
+ if (DEBUG_INSN_P (insn))
+ continue;
+ break;
+ }
+
+ return insn;
+}
+
+
\f
/* Given a chain of REG_NOTES originally from FROM_INSN, try to place them
as appropriate. I3 and I2 are the insns resulting from the combination
place = i2;
else
{
- gcc_assert (flag_non_call_exceptions);
+ gcc_assert (cfun->can_throw_non_call_exceptions);
if (may_trap_p (i3))
place = i3;
else if (i2 && may_trap_p (i2))
break;
case REG_INC:
- case REG_NO_CONFLICT:
/* These notes say something about how a register is used. They must
be present on any use of the register in I2 or I3. */
if (reg_mentioned_p (XEXP (note, 0), PATTERN (i3)))
}
break;
- case REG_LABEL:
+ case REG_LABEL_TARGET:
+ case REG_LABEL_OPERAND:
/* This can show up in several ways -- either directly in the
pattern, or hidden off in the constant pool with (or without?)
a REG_EQUAL note. */
place = i2;
}
- /* Don't attach REG_LABEL note to a JUMP_INSN. Add
- a JUMP_LABEL instead or decrement LABEL_NUSES. */
- if (place && JUMP_P (place))
+ /* For REG_LABEL_TARGET on a JUMP_P, we prefer to put the note
+ as a JUMP_LABEL or decrement LABEL_NUSES if it's already
+ there. */
+ if (place && JUMP_P (place)
+ && REG_NOTE_KIND (note) == REG_LABEL_TARGET
+ && (JUMP_LABEL (place) == NULL
+ || JUMP_LABEL (place) == XEXP (note, 0)))
{
rtx label = JUMP_LABEL (place);
if (!label)
JUMP_LABEL (place) = XEXP (note, 0);
- else
- {
- gcc_assert (label == XEXP (note, 0));
- if (LABEL_P (label))
- LABEL_NUSES (label)--;
- }
- place = 0;
+ else if (LABEL_P (label))
+ LABEL_NUSES (label)--;
}
- if (place2 && JUMP_P (place2))
+
+ if (place2 && JUMP_P (place2)
+ && REG_NOTE_KIND (note) == REG_LABEL_TARGET
+ && (JUMP_LABEL (place2) == NULL
+ || JUMP_LABEL (place2) == XEXP (note, 0)))
{
rtx label = JUMP_LABEL (place2);
if (!label)
JUMP_LABEL (place2) = XEXP (note, 0);
- else
- {
- gcc_assert (label == XEXP (note, 0));
- if (LABEL_P (label))
- LABEL_NUSES (label)--;
- }
+ else if (LABEL_P (label))
+ LABEL_NUSES (label)--;
place2 = 0;
}
break;
to simply delete it. */
break;
- case REG_LIBCALL_ID:
- /* If the insn previously containing this note still exists,
- put it back where it was. Otherwise move it to the previous
- insn. */
- if (!NOTE_P (from_insn))
- place = from_insn;
- else
- place = prev_real_insn (from_insn);
- break;
- case REG_RETVAL:
- /* If the insn previously containing this note still exists,
- put it back where it was. Otherwise move it to the previous
- insn. Adjust the corresponding REG_LIBCALL note. */
- if (!NOTE_P (from_insn))
- place = from_insn;
- else
- {
- tem = find_reg_note (XEXP (note, 0), REG_LIBCALL, NULL_RTX);
- place = prev_real_insn (from_insn);
- if (tem && place)
- XEXP (tem, 0) = place;
- /* If we're deleting the last remaining instruction of a
- libcall sequence, don't add the notes. */
- else if (XEXP (note, 0) == from_insn)
- tem = place = 0;
- /* Don't add the dangling REG_RETVAL note. */
- else if (! tem)
- place = 0;
- }
- break;
-
- case REG_LIBCALL:
- /* This is handled similarly to REG_RETVAL. */
- if (!NOTE_P (from_insn))
- place = from_insn;
- else
- {
- tem = find_reg_note (XEXP (note, 0), REG_RETVAL, NULL_RTX);
- place = next_real_insn (from_insn);
- if (tem && place)
- XEXP (tem, 0) = place;
- /* If we're deleting the last remaining instruction of a
- libcall sequence, don't add the notes. */
- else if (XEXP (note, 0) == from_insn)
- tem = place = 0;
- /* Don't add the dangling REG_LIBCALL note. */
- else if (! tem)
- place = 0;
- }
- break;
-
case REG_DEAD:
/* If we replaced the right hand side of FROM_INSN with a
REG_EQUAL note, the original use of the dying register
place = from_insn;
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
place = i3;
- else if (i2 != 0 && next_nonnote_insn (i2) == i3
+ else if (i2 != 0 && next_nonnote_nondebug_insn (i2) == i3
&& reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
place = i2;
else if ((rtx_equal_p (XEXP (note, 0), elim_i2)
for (tem = PREV_INSN (tem); place == 0; tem = PREV_INSN (tem))
{
- if (! INSN_P (tem))
+ if (!NONDEBUG_INSN_P (tem))
{
if (tem == BB_HEAD (bb))
break;
distribute_links (LOG_LINKS (tem));
SET_INSN_DELETED (tem);
+ if (tem == i2)
+ i2 = NULL_RTX;
#ifdef HAVE_cc0
/* Delete the setter too. */
distribute_links (LOG_LINKS (cc0_setter));
SET_INSN_DELETED (cc0_setter);
+ if (cc0_setter == i2)
+ i2 = NULL_RTX;
}
#endif
}
if (place && REG_NOTE_KIND (note) == REG_DEAD)
{
unsigned int regno = REGNO (XEXP (note, 0));
-
+ reg_stat_type *rsp = VEC_index (reg_stat_type, reg_stat, regno);
if (dead_or_set_p (place, XEXP (note, 0))
|| reg_bitfield_target_p (XEXP (note, 0), PATTERN (place)))
/* Unless the register previously died in PLACE, clear
last_death. [I no longer understand why this is
being done.] */
- if (reg_stat[regno].last_death != place)
- reg_stat[regno].last_death = 0;
+ if (rsp->last_death != place)
+ rsp->last_death = 0;
place = 0;
}
else
- reg_stat[regno].last_death = place;
+ rsp->last_death = place;
/* If this is a death note for a hard reg that is occupying
multiple registers, ensure that we are still using all
&& ! reg_bitfield_target_p (piece,
PATTERN (place)))
{
- rtx new_note
- = gen_rtx_EXPR_LIST (REG_DEAD, piece, NULL_RTX);
+ rtx new_note = alloc_reg_note (REG_DEAD, piece,
+ NULL_RTX);
distribute_notes (new_note, place, place,
NULL_RTX, NULL_RTX, NULL_RTX);
for (tem = PREV_INSN (place); ;
tem = PREV_INSN (tem))
{
- if (! INSN_P (tem))
+ if (!NONDEBUG_INSN_P (tem))
{
if (tem == BB_HEAD (bb))
break;
|| reg_bitfield_target_p (piece,
PATTERN (tem)))
{
- REG_NOTES (tem)
- = gen_rtx_EXPR_LIST (REG_UNUSED, piece,
- REG_NOTES (tem));
+ add_reg_note (tem, REG_UNUSED, piece);
break;
}
}
}
if (place2)
- REG_NOTES (place2)
- = gen_rtx_fmt_ee (GET_CODE (note), REG_NOTE_KIND (note),
- XEXP (note, 0), REG_NOTES (place2));
+ add_reg_note (place2, REG_NOTE_KIND (note), XEXP (note, 0));
}
}
\f
(insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
|| BB_HEAD (this_basic_block->next_bb) != insn));
insn = NEXT_INSN (insn))
- if (INSN_P (insn) && reg_overlap_mentioned_p (reg, PATTERN (insn)))
+ if (DEBUG_INSN_P (insn))
+ continue;
+ else if (INSN_P (insn) && reg_overlap_mentioned_p (reg, PATTERN (insn)))
{
if (reg_referenced_p (reg, PATTERN (insn)))
place = insn;
return 0;
}
-struct tree_opt_pass pass_combine =
+struct rtl_opt_pass pass_combine =
{
+ {
+ RTL_PASS,
"combine", /* name */
gate_handle_combine, /* gate */
rest_of_handle_combine, /* execute */
NULL, /* next */
0, /* static_pass_number */
TV_COMBINE, /* tv_id */
- 0, /* properties_required */
+ PROP_cfglayout, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
TODO_dump_func |
- TODO_df_finish |
+ TODO_df_finish | TODO_verify_rtl_sharing |
TODO_ggc_collect, /* todo_flags_finish */
- 'c' /* letter */
+ }
};
-