/* Optimize by combining instructions for GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
This file is part of GCC.
#include "expr.h"
#include "insn-attr.h"
#include "recog.h"
-#include "real.h"
#include "toplev.h"
#include "target.h"
#include "optabs.h"
static int label_tick;
-/* Reset to label_tick for each label. */
+/* Reset to label_tick for each extended basic block in scanning order. */
static int label_tick_ebb_start;
/* Record one modification to rtl structure
to be undone by storing old_contents into *where. */
+enum undo_kind { UNDO_RTX, UNDO_INT, UNDO_MODE };
+
struct undo
{
struct undo *next;
- enum { UNDO_RTX, UNDO_INT, UNDO_MODE } kind;
+ enum undo_kind kind;
union { rtx r; int i; enum machine_mode m; } old_contents;
union { rtx *r; int *i; } where;
};
static rtx try_combine (rtx, rtx, rtx, int *);
static void undo_all (void);
static void undo_commit (void);
-static rtx *find_split_point (rtx *, rtx);
+static rtx *find_split_point (rtx *, rtx, bool);
static rtx subst (rtx, rtx, rtx, int, int);
static rtx combine_simplify_rtx (rtx, enum machine_mode, int);
static rtx simplify_if_then_else (rtx);
little gain doing the checks here. Focus on catching invalid
transformations involving integer constants. */
if (GET_MODE_CLASS (GET_MODE (oldval)) == MODE_INT
- && GET_CODE (newval) == CONST_INT)
+ && CONST_INT_P (newval))
{
/* Sanity check that we're replacing oldval with a CONST_INT
that is a valid sign-extension for the original mode. */
perform this test on oldval instead, checking whether an
invalid replacement took place before we got here. */
gcc_assert (!(GET_CODE (oldval) == SUBREG
- && GET_CODE (SUBREG_REG (oldval)) == CONST_INT));
+ && CONST_INT_P (SUBREG_REG (oldval))));
gcc_assert (!(GET_CODE (oldval) == ZERO_EXTEND
- && GET_CODE (XEXP (oldval, 0)) == CONST_INT));
+ && CONST_INT_P (XEXP (oldval, 0))));
}
if (undobuf.frees)
/* Subroutine of try_combine. Determine whether the combine replacement
patterns NEWPAT, NEWI2PAT and NEWOTHERPAT are cheaper according to
insn_rtx_cost that the original instruction sequence I1, I2, I3 and
- undobuf.other_insn. Note that I1 and/or NEWI2PAT may be NULL_RTX.
+ undobuf.other_insn. Note that I1 and/or NEWI2PAT may be NULL_RTX.
NEWOTHERPAT and undobuf.other_insn may also both be NULL_RTX. This
function returns false, if the costs of all instructions can be
estimated, and the replacements are more expensive than the original
register and establishing log links when def is encountered.
Note that we do not clear next_use array in order to save time,
so we have to test whether the use is in the same basic block as def.
-
+
There are a few cases below when we do not consider the definition or
usage -- these are taken from original flow.c did. Don't ask me why it is
done this way; I don't know and if it works, I don't want to know. */
{
FOR_BB_INSNS_REVERSE (bb, insn)
{
- if (!INSN_P (insn))
+ if (!NONDEBUG_INSN_P (insn))
continue;
/* Log links are created only once. */
if (INSN_P (insn))
free_INSN_LIST_list (&LOG_LINKS (insn));
}
-
-
-
\f
/* Main entry point for combiner. F is the first insn of the function.
NREGS is the first unused pseudo-reg number.
#endif
rtx links, nextlinks;
rtx first;
+ basic_block last_bb;
int new_direct_jump_p = 0;
problems when, for example, we have j <<= 1 in a loop. */
nonzero_sign_valid = 0;
+ label_tick = label_tick_ebb_start = 1;
/* Scan all SETs and see if we can deduce anything about what
bits are known to be zero for some registers and how many copies
for what bits are known to be set. */
setup_incoming_promotions (first);
+ /* Allow the entry block and the first block to fall into the same EBB.
+ Conceptually the incoming promotions are assigned to the entry block. */
+ last_bb = ENTRY_BLOCK_PTR;
create_log_links ();
- label_tick_ebb_start = ENTRY_BLOCK_PTR->index;
FOR_EACH_BB (this_basic_block)
{
optimize_this_for_speed_p = optimize_bb_for_speed_p (this_basic_block);
last_call_luid = 0;
mem_last_set = -1;
- label_tick = this_basic_block->index;
+
+ label_tick++;
if (!single_pred_p (this_basic_block)
- || single_pred (this_basic_block)->index != label_tick - 1)
+ || single_pred (this_basic_block) != last_bb)
label_tick_ebb_start = label_tick;
+ last_bb = this_basic_block;
+
FOR_BB_INSNS (this_basic_block, insn)
if (INSN_P (insn) && BLOCK_FOR_INSN (insn))
{
nonzero_sign_valid = 1;
/* Now scan all the insns in forward order. */
-
- label_tick_ebb_start = ENTRY_BLOCK_PTR->index;
+ label_tick = label_tick_ebb_start = 1;
init_reg_last ();
setup_incoming_promotions (first);
+ last_bb = ENTRY_BLOCK_PTR;
FOR_EACH_BB (this_basic_block)
{
optimize_this_for_speed_p = optimize_bb_for_speed_p (this_basic_block);
last_call_luid = 0;
mem_last_set = -1;
- label_tick = this_basic_block->index;
+
+ label_tick++;
if (!single_pred_p (this_basic_block)
- || single_pred (this_basic_block)->index != label_tick - 1)
+ || single_pred (this_basic_block) != last_bb)
label_tick_ebb_start = label_tick;
+ last_bb = this_basic_block;
+
rtl_profile_for_bb (this_basic_block);
for (insn = BB_HEAD (this_basic_block);
insn != NEXT_INSN (BB_END (this_basic_block));
insn = next ? next : NEXT_INSN (insn))
{
next = 0;
- if (INSN_P (insn))
+ if (NONDEBUG_INSN_P (insn))
{
/* See if we know about function return values before this
insn based upon SUBREG flags. */
tree arg;
bool strictly_local = false;
- if (!targetm.calls.promote_function_args (TREE_TYPE (cfun->decl)))
- return;
-
for (arg = DECL_ARGUMENTS (current_function_decl); arg;
arg = TREE_CHAIN (arg))
{
- rtx reg = DECL_INCOMING_RTL (arg);
+ rtx x, reg = DECL_INCOMING_RTL (arg);
int uns1, uns3;
enum machine_mode mode1, mode2, mode3, mode4;
mode2 = TYPE_MODE (DECL_ARG_TYPE (arg));
uns3 = TYPE_UNSIGNED (DECL_ARG_TYPE (arg));
- /* The mode and signedness of the argument as it is actually passed,
+ /* The mode and signedness of the argument as it is actually passed,
after any TARGET_PROMOTE_FUNCTION_ARGS-driven ABI promotions. */
- mode3 = promote_mode (DECL_ARG_TYPE (arg), mode2, &uns3, 1);
+ mode3 = promote_function_mode (DECL_ARG_TYPE (arg), mode2, &uns3,
+ TREE_TYPE (cfun->decl), 0);
/* The mode of the register in which the argument is being passed. */
mode4 = GET_MODE (reg);
- /* Eliminate sign extensions in the callee when possible. Only
- do this when:
- (a) a mode promotion has occurred;
- (b) the mode of the register is the same as the mode of
- the argument as it is passed; and
- (c) the signedness does not change across any of the promotions; and
- (d) when no language-level promotions (which we cannot guarantee
- will have been done by an external caller) are necessary,
- unless we know that this function is only ever called from
- the current compilation unit -- all of whose call sites will
- do the mode1 --> mode2 promotion. */
- if (mode1 != mode3
- && mode3 == mode4
- && uns1 == uns3
- && (mode1 == mode2 || strictly_local))
- {
- /* Record that the value was promoted from mode1 to mode3,
- so that any sign extension at the head of the current
- function may be eliminated. */
- rtx x;
- x = gen_rtx_CLOBBER (mode1, const0_rtx);
- x = gen_rtx_fmt_e ((uns3 ? ZERO_EXTEND : SIGN_EXTEND), mode3, x);
- record_value_for_reg (reg, first, x);
- }
+ /* Eliminate sign extensions in the callee when:
+ (a) A mode promotion has occurred; */
+ if (mode1 == mode3)
+ continue;
+ /* (b) The mode of the register is the same as the mode of
+ the argument as it is passed; */
+ if (mode3 != mode4)
+ continue;
+ /* (c) There's no language level extension; */
+ if (mode1 == mode2)
+ ;
+ /* (c.1) All callers are from the current compilation unit. If that's
+ the case we don't have to rely on an ABI, we only have to know
+ what we're generating right now, and we know that we will do the
+ mode1 to mode2 promotion with the given sign. */
+ else if (!strictly_local)
+ continue;
+ /* (c.2) The combination of the two promotions is useful. This is
+ true when the signs match, or if the first promotion is unsigned.
+ In the later case, (sign_extend (zero_extend x)) is the same as
+ (zero_extend (zero_extend x)), so make sure to force UNS3 true. */
+ else if (uns1)
+ uns3 = true;
+ else if (uns3)
+ continue;
+
+ /* Record that the value was promoted from mode1 to mode3,
+ so that any sign extension at the head of the current
+ function may be eliminated. */
+ x = gen_rtx_CLOBBER (mode1, const0_rtx);
+ x = gen_rtx_fmt_e ((uns3 ? ZERO_EXTEND : SIGN_EXTEND), mode3, x);
+ record_value_for_reg (reg, first, x);
}
}
instead of this kludge. */
if (GET_MODE_BITSIZE (GET_MODE (x)) < BITS_PER_WORD
- && GET_CODE (src) == CONST_INT
+ && CONST_INT_P (src)
&& INTVAL (src) > 0
&& 0 != (INTVAL (src)
& ((HOST_WIDE_INT) 1
for (i = 0; i < XVECLEN (PATTERN (insn), 0); i++)
{
rtx elt = XVECEXP (PATTERN (insn), 0, i);
- rtx note;
switch (GET_CODE (elt))
{
/* Ignore SETs whose result isn't used but not those that
have side-effects. */
if (find_reg_note (insn, REG_UNUSED, SET_DEST (elt))
- && (!(note = find_reg_note (insn, REG_EH_REGION, NULL_RTX))
- || INTVAL (XEXP (note, 0)) <= 0)
- && ! side_effects_p (elt))
+ && insn_nothrow_p (insn)
+ && !side_effects_p (elt))
break;
/* If we have already found a SET, this is a second one and
return 1;
case MULT:
- return ! (GET_CODE (XEXP (x, 1)) == CONST_INT
+ return ! (CONST_INT_P (XEXP (x, 1))
&& exact_log2 (INTVAL (XEXP (x, 1))) >= 0);
default:
if (BINARY_P (x))
unsigned regno, nregs;
/* We assume here that no machine mode needs more than
32 hard registers when the value overlaps with a register
- for which FUNCTION_VALUE_REGNO_P is true. */
+ for which TARGET_FUNCTION_VALUE_REGNO_P is true. */
unsigned mask;
struct likely_spilled_retval_info info;
if (!NONJUMP_INSN_P (use) || GET_CODE (PATTERN (use)) != USE || insn == use)
return 0;
reg = XEXP (PATTERN (use), 0);
- if (!REG_P (reg) || !FUNCTION_VALUE_REGNO_P (REGNO (reg)))
+ if (!REG_P (reg) || !targetm.calls.function_value_regno_p (REGNO (reg)))
return 0;
regno = REGNO (reg);
nregs = hard_regno_nregs[regno][GET_MODE (reg)];
&& GET_MODE_CLASS (GET_MODE (x)) == MODE_INT;
}
+#ifdef AUTO_INC_DEC
+/* Replace auto-increment addressing modes with explicit operations to
+ access the same addresses without modifying the corresponding
+ registers. If AFTER holds, SRC is meant to be reused after the
+ side effect, otherwise it is to be reused before that. */
+
+static rtx
+cleanup_auto_inc_dec (rtx src, bool after, enum machine_mode mem_mode)
+{
+ rtx x = src;
+ const RTX_CODE code = GET_CODE (x);
+ int i;
+ const char *fmt;
+
+ switch (code)
+ {
+ case REG:
+ case CONST_INT:
+ case CONST_DOUBLE:
+ case CONST_FIXED:
+ case CONST_VECTOR:
+ case SYMBOL_REF:
+ case CODE_LABEL:
+ case PC:
+ case CC0:
+ case SCRATCH:
+ /* SCRATCH must be shared because they represent distinct values. */
+ return x;
+ case CLOBBER:
+ if (REG_P (XEXP (x, 0)) && REGNO (XEXP (x, 0)) < FIRST_PSEUDO_REGISTER)
+ return x;
+ break;
+
+ case CONST:
+ if (shared_const_p (x))
+ return x;
+ break;
+
+ case MEM:
+ mem_mode = GET_MODE (x);
+ break;
+
+ case PRE_INC:
+ case PRE_DEC:
+ case POST_INC:
+ case POST_DEC:
+ gcc_assert (mem_mode != VOIDmode && mem_mode != BLKmode);
+ if (after == (code == PRE_INC || code == PRE_DEC))
+ x = cleanup_auto_inc_dec (XEXP (x, 0), after, mem_mode);
+ else
+ x = gen_rtx_PLUS (GET_MODE (x),
+ cleanup_auto_inc_dec (XEXP (x, 0), after, mem_mode),
+ GEN_INT ((code == PRE_INC || code == POST_INC)
+ ? GET_MODE_SIZE (mem_mode)
+ : -GET_MODE_SIZE (mem_mode)));
+ return x;
+
+ case PRE_MODIFY:
+ case POST_MODIFY:
+ if (after == (code == PRE_MODIFY))
+ x = XEXP (x, 0);
+ else
+ x = XEXP (x, 1);
+ return cleanup_auto_inc_dec (x, after, mem_mode);
+
+ default:
+ break;
+ }
+
+ /* Copy the various flags, fields, and other information. We assume
+ that all fields need copying, and then clear the fields that should
+ not be copied. That is the sensible default behavior, and forces
+ us to explicitly document why we are *not* copying a flag. */
+ x = shallow_copy_rtx (x);
+
+ /* We do not copy the USED flag, which is used as a mark bit during
+ walks over the RTL. */
+ RTX_FLAG (x, used) = 0;
+
+ /* We do not copy FRAME_RELATED for INSNs. */
+ if (INSN_P (x))
+ RTX_FLAG (x, frame_related) = 0;
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (fmt[i] == 'e')
+ XEXP (x, i) = cleanup_auto_inc_dec (XEXP (x, i), after, mem_mode);
+ else if (fmt[i] == 'E' || fmt[i] == 'V')
+ {
+ int j;
+ XVEC (x, i) = rtvec_alloc (XVECLEN (x, i));
+ for (j = 0; j < XVECLEN (x, i); j++)
+ XVECEXP (x, i, j)
+ = cleanup_auto_inc_dec (XVECEXP (src, i, j), after, mem_mode);
+ }
+
+ return x;
+}
+#endif
+
+/* Auxiliary data structure for propagate_for_debug_stmt. */
+
+struct rtx_subst_pair
+{
+ rtx to;
+ bool adjusted;
+ bool after;
+};
-/* Delete the conditional jump INSN and adjust the CFG correspondingly.
+/* DATA points to an rtx_subst_pair. Return the value that should be
+ substituted. */
+
+static rtx
+propagate_for_debug_subst (rtx from, const_rtx old_rtx, void *data)
+{
+ struct rtx_subst_pair *pair = (struct rtx_subst_pair *)data;
+
+ if (!rtx_equal_p (from, old_rtx))
+ return NULL_RTX;
+ if (!pair->adjusted)
+ {
+ pair->adjusted = true;
+#ifdef AUTO_INC_DEC
+ pair->to = cleanup_auto_inc_dec (pair->to, pair->after, VOIDmode);
+#else
+ pair->to = copy_rtx (pair->to);
+#endif
+ pair->to = make_compound_operation (pair->to, SET);
+ return pair->to;
+ }
+ return copy_rtx (pair->to);
+}
+
+/* Replace occurrences of DEST with SRC in DEBUG_INSNs between INSN
+ and LAST. If MOVE holds, debug insns must also be moved past
+ LAST. */
+
+static void
+propagate_for_debug (rtx insn, rtx last, rtx dest, rtx src, bool move)
+{
+ rtx next, move_pos = move ? last : NULL_RTX, loc;
+
+ struct rtx_subst_pair p;
+ p.to = src;
+ p.adjusted = false;
+ p.after = move;
+
+ next = NEXT_INSN (insn);
+ while (next != last)
+ {
+ insn = next;
+ next = NEXT_INSN (insn);
+ if (DEBUG_INSN_P (insn))
+ {
+ loc = simplify_replace_fn_rtx (INSN_VAR_LOCATION_LOC (insn),
+ dest, propagate_for_debug_subst, &p);
+ if (loc == INSN_VAR_LOCATION_LOC (insn))
+ continue;
+ INSN_VAR_LOCATION_LOC (insn) = loc;
+ if (move_pos)
+ {
+ remove_insn (insn);
+ PREV_INSN (insn) = NEXT_INSN (insn) = NULL_RTX;
+ move_pos = emit_debug_insn_after (insn, move_pos);
+ }
+ else
+ df_insn_rescan (insn);
+ }
+ }
+}
+
+/* Delete the unconditional jump INSN and adjust the CFG correspondingly.
Note that the INSN should be deleted *after* removing dead edges, so
that the kept edge is the fallthrough edge for a (set (pc) (pc))
but not for a (set (pc) (label_ref FOO)). */
update_cfg_for_uncondjump (rtx insn)
{
basic_block bb = BLOCK_FOR_INSN (insn);
+ bool at_end = (BB_END (bb) == insn);
- if (BB_END (bb) == insn)
+ if (at_end)
purge_dead_edges (bb);
delete_insn (insn);
- if (EDGE_COUNT (bb->succs) == 1)
+ if (at_end && EDGE_COUNT (bb->succs) == 1)
single_succ_edge (bb)->flags |= EDGE_FALLTHRU;
}
I2 and not in I3, a REG_DEAD note must be made. */
rtx i3dest_killed = 0;
/* SET_DEST and SET_SRC of I2 and I1. */
- rtx i2dest, i2src, i1dest = 0, i1src = 0;
+ rtx i2dest = 0, i2src = 0, i1dest = 0, i1src = 0;
+ /* Set if I2DEST was reused as a scratch register. */
+ bool i2scratch = false;
/* PATTERN (I1) and PATTERN (I2), or a copy of it in certain cases. */
rtx i1pat = 0, i2pat = 0;
/* Indicates if I2DEST or I1DEST is in I2SRC or I1_SRC. */
/* Reset the hard register usage information. */
CLEAR_HARD_REG_SET (newpat_used_regs);
+ if (dump_file && (dump_flags & TDF_DETAILS))
+ {
+ if (i1)
+ fprintf (dump_file, "\nTrying %d, %d -> %d:\n",
+ INSN_UID (i1), INSN_UID (i2), INSN_UID (i3));
+ else
+ fprintf (dump_file, "\nTrying %d -> %d:\n",
+ INSN_UID (i2), INSN_UID (i3));
+ }
+
/* If I1 and I2 both feed I3, they can be in any order. To simplify the
code below, set I1 to be the earlier of the two insns. */
if (i1 && DF_INSN_LUID (i1) > DF_INSN_LUID (i2))
&& GET_CODE (SET_DEST (PATTERN (i3))) != STRICT_LOW_PART
&& ! reg_overlap_mentioned_p (SET_SRC (PATTERN (i3)),
SET_DEST (PATTERN (i3)))
- && next_real_insn (i2) == i3)
+ && next_active_insn (i2) == i3)
{
rtx p2 = PATTERN (i2);
subst_low_luid = DF_INSN_LUID (i2);
added_sets_2 = added_sets_1 = 0;
+ i2src = SET_DEST (PATTERN (i3));
i2dest = SET_SRC (PATTERN (i3));
i2dest_killed = dead_or_set_p (i2, i2dest);
constant. */
if (i1 == 0
&& (temp = single_set (i2)) != 0
- && (GET_CODE (SET_SRC (temp)) == CONST_INT
+ && (CONST_INT_P (SET_SRC (temp))
|| GET_CODE (SET_SRC (temp)) == CONST_DOUBLE)
&& GET_CODE (PATTERN (i3)) == SET
- && (GET_CODE (SET_SRC (PATTERN (i3))) == CONST_INT
+ && (CONST_INT_P (SET_SRC (PATTERN (i3)))
|| GET_CODE (SET_SRC (PATTERN (i3))) == CONST_DOUBLE)
&& reg_subword_p (SET_DEST (PATTERN (i3)), SET_DEST (temp)))
{
if (GET_CODE (dest) == ZERO_EXTRACT)
{
- if (GET_CODE (XEXP (dest, 1)) == CONST_INT
- && GET_CODE (XEXP (dest, 2)) == CONST_INT)
+ if (CONST_INT_P (XEXP (dest, 1))
+ && CONST_INT_P (XEXP (dest, 2)))
{
width = INTVAL (XEXP (dest, 1));
offset = INTVAL (XEXP (dest, 2));
if (offset >= 0
&& (GET_MODE_BITSIZE (GET_MODE (SET_DEST (temp)))
- <= HOST_BITS_PER_WIDE_INT * 2))
+ <= HOST_BITS_PER_DOUBLE_INT))
{
- HOST_WIDE_INT mhi, ohi, ihi;
- HOST_WIDE_INT mlo, olo, ilo;
+ double_int m, o, i;
rtx inner = SET_SRC (PATTERN (i3));
rtx outer = SET_SRC (temp);
- if (GET_CODE (outer) == CONST_INT)
- {
- olo = INTVAL (outer);
- ohi = olo < 0 ? -1 : 0;
- }
- else
- {
- olo = CONST_DOUBLE_LOW (outer);
- ohi = CONST_DOUBLE_HIGH (outer);
- }
-
- if (GET_CODE (inner) == CONST_INT)
- {
- ilo = INTVAL (inner);
- ihi = ilo < 0 ? -1 : 0;
- }
- else
- {
- ilo = CONST_DOUBLE_LOW (inner);
- ihi = CONST_DOUBLE_HIGH (inner);
- }
-
- if (width < HOST_BITS_PER_WIDE_INT)
- {
- mlo = ((unsigned HOST_WIDE_INT) 1 << width) - 1;
- mhi = 0;
- }
- else if (width < HOST_BITS_PER_WIDE_INT * 2)
- {
- mhi = ((unsigned HOST_WIDE_INT) 1
- << (width - HOST_BITS_PER_WIDE_INT)) - 1;
- mlo = -1;
- }
- else
- {
- mlo = -1;
- mhi = -1;
- }
-
- ilo &= mlo;
- ihi &= mhi;
-
- if (offset >= HOST_BITS_PER_WIDE_INT)
- {
- mhi = mlo << (offset - HOST_BITS_PER_WIDE_INT);
- mlo = 0;
- ihi = ilo << (offset - HOST_BITS_PER_WIDE_INT);
- ilo = 0;
- }
- else if (offset > 0)
- {
- mhi = (mhi << offset) | ((unsigned HOST_WIDE_INT) mlo
- >> (HOST_BITS_PER_WIDE_INT - offset));
- mlo = mlo << offset;
- ihi = (ihi << offset) | ((unsigned HOST_WIDE_INT) ilo
- >> (HOST_BITS_PER_WIDE_INT - offset));
- ilo = ilo << offset;
- }
+ o = rtx_to_double_int (outer);
+ i = rtx_to_double_int (inner);
- olo = (olo & ~mlo) | ilo;
- ohi = (ohi & ~mhi) | ihi;
+ m = double_int_mask (width);
+ i = double_int_and (i, m);
+ m = double_int_lshift (m, offset, HOST_BITS_PER_DOUBLE_INT, false);
+ i = double_int_lshift (i, offset, HOST_BITS_PER_DOUBLE_INT, false);
+ o = double_int_ior (double_int_and (o, double_int_not (m)), i);
combine_merges++;
subst_insn = i3;
i2dest = SET_DEST (temp);
i2dest_killed = dead_or_set_p (i2, i2dest);
+ /* Replace the source in I2 with the new constant and make the
+ resulting insn the new pattern for I3. Then skip to where we
+ validate the pattern. Everything was set up above. */
SUBST (SET_SRC (temp),
- immed_double_const (olo, ohi, GET_MODE (SET_DEST (temp))));
+ immed_double_int_const (o, GET_MODE (SET_DEST (temp))));
newpat = PATTERN (i2);
+
+ /* The dest of I3 has been replaced with the dest of I2. */
+ changed_i3_dest = 1;
goto validate_replacement;
}
}
}
}
- /* We come here when we are replacing a destination in I2 with the
- destination of I3. */
validate_replacement:
/* Note which hard regs this insn has as inputs. */
{
rtx set0 = XVECEXP (newpat, 0, 0);
rtx set1 = XVECEXP (newpat, 0, 1);
- rtx note;
if (((REG_P (SET_DEST (set1))
&& find_reg_note (i3, REG_UNUSED, SET_DEST (set1)))
|| (GET_CODE (SET_DEST (set1)) == SUBREG
&& find_reg_note (i3, REG_UNUSED, SUBREG_REG (SET_DEST (set1)))))
- && (!(note = find_reg_note (i3, REG_EH_REGION, NULL_RTX))
- || INTVAL (XEXP (note, 0)) <= 0)
- && ! side_effects_p (SET_SRC (set1)))
+ && insn_nothrow_p (i3)
+ && !side_effects_p (SET_SRC (set1)))
{
newpat = set0;
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
|| (GET_CODE (SET_DEST (set0)) == SUBREG
&& find_reg_note (i3, REG_UNUSED,
SUBREG_REG (SET_DEST (set0)))))
- && (!(note = find_reg_note (i3, REG_EH_REGION, NULL_RTX))
- || INTVAL (XEXP (note, 0)) <= 0)
- && ! side_effects_p (SET_SRC (set0)))
+ && insn_nothrow_p (i3)
+ && !side_effects_p (SET_SRC (set0)))
{
newpat = set1;
insn_code_number = recog_for_combine (&newpat, i3, &new_i3_notes);
undobuf.frees = buf;
}
}
+
+ i2scratch = m_split != 0;
}
/* If recog_for_combine has discarded clobbers, try to use them
/* If we can split it and use I2DEST, go ahead and see if that
helps things be recognized. Verify that none of the registers
are set between I2 and I3. */
- if (insn_code_number < 0 && (split = find_split_point (&newpat, i3)) != 0
+ if (insn_code_number < 0
+ && (split = find_split_point (&newpat, i3, false)) != 0
#ifdef HAVE_cc0
&& REG_P (i2dest)
#endif
bool subst_done = false;
newi2pat = NULL_RTX;
+ i2scratch = true;
+
+ /* *SPLIT may be part of I2SRC, so make sure we have the
+ original expression around for later debug processing.
+ We should not need I2SRC any more in other cases. */
+ if (MAY_HAVE_DEBUG_INSNS)
+ i2src = copy_rtx (i2src);
+ else
+ i2src = NULL;
+
/* Get NEWDEST as a register in the proper mode. We have already
validated that we can do this. */
if (GET_MODE (i2dest) != split_mode && split_mode != VOIDmode)
an ASHIFT. This can occur if it was inside a PLUS and hence
appeared to be a memory address. This is a kludge. */
if (split_code == MULT
- && GET_CODE (XEXP (*split, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (*split, 1))
&& INTVAL (XEXP (*split, 1)) > 0
&& (i = exact_log2 (INTVAL (XEXP (*split, 1)))) >= 0)
{
return 0;
}
+ if (MAY_HAVE_DEBUG_INSNS)
+ {
+ struct undo *undo;
+
+ for (undo = undobuf.undos; undo; undo = undo->next)
+ if (undo->kind == UNDO_MODE)
+ {
+ rtx reg = *undo->where.r;
+ enum machine_mode new_mode = GET_MODE (reg);
+ enum machine_mode old_mode = undo->old_contents.m;
+
+ /* Temporarily revert mode back. */
+ adjust_reg_mode (reg, old_mode);
+
+ if (reg == i2dest && i2scratch)
+ {
+ /* If we used i2dest as a scratch register with a
+ different mode, substitute it for the original
+ i2src while its original mode is temporarily
+ restored, and then clear i2scratch so that we don't
+ do it again later. */
+ propagate_for_debug (i2, i3, reg, i2src, false);
+ i2scratch = false;
+ /* Put back the new mode. */
+ adjust_reg_mode (reg, new_mode);
+ }
+ else
+ {
+ rtx tempreg = gen_raw_REG (old_mode, REGNO (reg));
+ rtx first, last;
+
+ if (reg == i2dest)
+ {
+ first = i2;
+ last = i3;
+ }
+ else
+ {
+ first = i3;
+ last = undobuf.other_insn;
+ gcc_assert (last);
+ }
+
+ /* We're dealing with a reg that changed mode but not
+ meaning, so we want to turn it into a subreg for
+ the new mode. However, because of REG sharing and
+ because its mode had already changed, we have to do
+ it in two steps. First, replace any debug uses of
+ reg, with its original mode temporarily restored,
+ with this copy we have created; then, replace the
+ copy with the SUBREG of the original shared reg,
+ once again changed to the new mode. */
+ propagate_for_debug (first, last, reg, tempreg, false);
+ adjust_reg_mode (reg, new_mode);
+ propagate_for_debug (first, last, tempreg,
+ lowpart_subreg (old_mode, reg, new_mode),
+ false);
+ }
+ }
+ }
+
/* If we will be able to accept this, we have made a
change to the destination of I3. This requires us to
do a few adjustments. */
call_usage = copy_rtx (call_usage);
if (substed_i2)
- replace_rtx (call_usage, i2dest, i2src);
+ {
+ /* I2SRC must still be meaningful at this point. Some splitting
+ operations can invalidate I2SRC, but those operations do not
+ apply to calls. */
+ gcc_assert (i2src);
+ replace_rtx (call_usage, i2dest, i2src);
+ }
if (substed_i1)
replace_rtx (call_usage, i1dest, i1src);
if (newi2pat)
{
+ if (MAY_HAVE_DEBUG_INSNS && i2scratch)
+ propagate_for_debug (i2, i3, i2dest, i2src, false);
INSN_CODE (i2) = i2_code_number;
PATTERN (i2) = newi2pat;
}
else
- SET_INSN_DELETED (i2);
+ {
+ if (MAY_HAVE_DEBUG_INSNS && i2src)
+ propagate_for_debug (i2, i3, i2dest, i2src, i3_subst_into_i2);
+ SET_INSN_DELETED (i2);
+ }
if (i1)
{
LOG_LINKS (i1) = 0;
REG_NOTES (i1) = 0;
+ if (MAY_HAVE_DEBUG_INSNS)
+ propagate_for_debug (i1, i3, i1dest, i1src, false);
SET_INSN_DELETED (i1);
}
if (newi2pat && new_i2_notes)
distribute_notes (new_i2_notes, i2, i2, NULL_RTX, NULL_RTX, NULL_RTX);
-
+
if (new_i3_notes)
distribute_notes (new_i3_notes, i3, i3, NULL_RTX, NULL_RTX, NULL_RTX);
if (i3dest_killed)
{
if (newi2pat && reg_set_p (i3dest_killed, newi2pat))
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i3dest_killed,
- NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i3dest_killed,
+ NULL_RTX),
NULL_RTX, i2, NULL_RTX, elim_i2, elim_i1);
else
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i3dest_killed,
- NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i3dest_killed,
+ NULL_RTX),
NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
elim_i2, elim_i1);
}
if (i2dest_in_i2src)
{
if (newi2pat && reg_set_p (i2dest, newi2pat))
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i2dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i2dest, NULL_RTX),
NULL_RTX, i2, NULL_RTX, NULL_RTX, NULL_RTX);
else
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i2dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i2dest, NULL_RTX),
NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
NULL_RTX, NULL_RTX);
}
if (i1dest_in_i1src)
{
if (newi2pat && reg_set_p (i1dest, newi2pat))
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i1dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i1dest, NULL_RTX),
NULL_RTX, i2, NULL_RTX, NULL_RTX, NULL_RTX);
else
- distribute_notes (gen_rtx_EXPR_LIST (REG_DEAD, i1dest, NULL_RTX),
+ distribute_notes (alloc_reg_note (REG_DEAD, i1dest, NULL_RTX),
NULL_RTX, i3, newi2pat ? i2 : NULL_RTX,
NULL_RTX, NULL_RTX);
}
}
df_insn_rescan (i3);
}
-
+
/* Set new_direct_jump_p if a new return or simple jump instruction
has been created. Adjust the CFG accordingly. */
*new_direct_jump_p = 1;
update_cfg_for_uncondjump (i3);
}
-
+
combine_successes++;
undo_commit ();
two insns. */
static rtx *
-find_split_point (rtx *loc, rtx insn)
+find_split_point (rtx *loc, rtx insn, bool set_src)
{
rtx x = *loc;
enum rtx_code code = GET_CODE (x);
if (MEM_P (SUBREG_REG (x)))
return loc;
#endif
- return find_split_point (&SUBREG_REG (x), insn);
+ return find_split_point (&SUBREG_REG (x), insn, false);
case MEM:
#ifdef HAVE_lo_sum
if (GET_CODE (XEXP (x, 0)) == CONST
|| GET_CODE (XEXP (x, 0)) == SYMBOL_REF)
{
+ enum machine_mode address_mode
+ = targetm.addr_space.address_mode (MEM_ADDR_SPACE (x));
+
SUBST (XEXP (x, 0),
- gen_rtx_LO_SUM (Pmode,
- gen_rtx_HIGH (Pmode, XEXP (x, 0)),
+ gen_rtx_LO_SUM (address_mode,
+ gen_rtx_HIGH (address_mode, XEXP (x, 0)),
XEXP (x, 0)));
return &XEXP (XEXP (x, 0), 0);
}
the first pseudo-reg (one of the virtual regs) as a placeholder;
it will not remain in the result. */
if (GET_CODE (XEXP (x, 0)) == PLUS
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
- && ! memory_address_p (GET_MODE (x), XEXP (x, 0)))
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
+ && ! memory_address_addr_space_p (GET_MODE (x), XEXP (x, 0),
+ MEM_ADDR_SPACE (x)))
{
rtx reg = regno_reg_rtx[FIRST_PSEUDO_REGISTER];
rtx seq = combine_split_insns (gen_rtx_SET (VOIDmode, reg,
&& NONJUMP_INSN_P (NEXT_INSN (seq))
&& GET_CODE (PATTERN (NEXT_INSN (seq))) == SET
&& SET_DEST (PATTERN (NEXT_INSN (seq))) == reg
- && memory_address_p (GET_MODE (x),
- SET_SRC (PATTERN (NEXT_INSN (seq)))))
+ && memory_address_addr_space_p
+ (GET_MODE (x), SET_SRC (PATTERN (NEXT_INSN (seq))),
+ MEM_ADDR_SPACE (x)))
{
rtx src1 = SET_SRC (PATTERN (seq));
rtx src2 = SET_SRC (PATTERN (NEXT_INSN (seq)));
/* If we have a PLUS whose first operand is complex, try computing it
separately by making a split there. */
if (GET_CODE (XEXP (x, 0)) == PLUS
- && ! memory_address_p (GET_MODE (x), XEXP (x, 0))
+ && ! memory_address_addr_space_p (GET_MODE (x), XEXP (x, 0),
+ MEM_ADDR_SPACE (x))
&& ! OBJECT_P (XEXP (XEXP (x, 0), 0))
&& ! (GET_CODE (XEXP (XEXP (x, 0), 0)) == SUBREG
&& OBJECT_P (SUBREG_REG (XEXP (XEXP (x, 0), 0)))))
#endif
/* See if we can split SET_SRC as it stands. */
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
/* See if we can split SET_DEST as it stands. */
- split = find_split_point (&SET_DEST (x), insn);
+ split = find_split_point (&SET_DEST (x), insn, false);
if (split && split != &SET_DEST (x))
return split;
if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
&& (GET_MODE_BITSIZE (GET_MODE (XEXP (SET_DEST (x), 0)))
<= HOST_BITS_PER_WIDE_INT)
- && GET_CODE (XEXP (SET_DEST (x), 1)) == CONST_INT
- && GET_CODE (XEXP (SET_DEST (x), 2)) == CONST_INT
- && GET_CODE (SET_SRC (x)) == CONST_INT
+ && CONST_INT_P (XEXP (SET_DEST (x), 1))
+ && CONST_INT_P (XEXP (SET_DEST (x), 2))
+ && CONST_INT_P (SET_SRC (x))
&& ((INTVAL (XEXP (SET_DEST (x), 1))
+ INTVAL (XEXP (SET_DEST (x), 2)))
<= GET_MODE_BITSIZE (GET_MODE (XEXP (SET_DEST (x), 0))))
SUBST (SET_DEST (x), dest);
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
this is no worse, but if it took more than one insn, it will
be better. */
- if (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (SET_SRC (x), 1))
&& REG_P (XEXP (SET_SRC (x), 0))
&& (pos = exact_log2 (INTVAL (XEXP (SET_SRC (x), 1)))) >= 7
&& REG_P (SET_DEST (x))
if (extraction != 0)
{
SUBST (SET_SRC (x), extraction);
- return find_split_point (loc, insn);
+ return find_split_point (loc, insn, false);
}
}
break;
XEXP (SET_SRC (x), 0),
GEN_INT (pos))));
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
case SIGN_EXTRACT:
case ZERO_EXTRACT:
- if (GET_CODE (XEXP (SET_SRC (x), 1)) == CONST_INT
- && GET_CODE (XEXP (SET_SRC (x), 2)) == CONST_INT)
+ if (CONST_INT_P (XEXP (SET_SRC (x), 1))
+ && CONST_INT_P (XEXP (SET_SRC (x), 2)))
{
inner = XEXP (SET_SRC (x), 0);
len = INTVAL (XEXP (SET_SRC (x), 1));
GEN_INT (pos)),
GEN_INT (((HOST_WIDE_INT) 1 << len) - 1)));
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
- len - pos)),
GEN_INT (GET_MODE_BITSIZE (mode) - len)));
- split = find_split_point (&SET_SRC (x), insn);
+ split = find_split_point (&SET_SRC (x), insn, true);
if (split && split != &SET_SRC (x))
return split;
}
GET_MODE (x),
XEXP (XEXP (x, 0), 0),
XEXP (XEXP (x, 1), 0))));
- return find_split_point (loc, insn);
+ return find_split_point (loc, insn, set_src);
}
/* Many RISC machines have a large set of logical insns. If the
}
break;
+ case PLUS:
+ case MINUS:
+ /* Split at a multiply-accumulate instruction. However if this is
+ the SET_SRC, we likely do not have such an instruction and it's
+ worthless to try this split. */
+ if (!set_src && GET_CODE (XEXP (x, 0)) == MULT)
+ return loc;
+
default:
break;
}
{
case RTX_BITFIELD_OPS: /* This is ZERO_EXTRACT and SIGN_EXTRACT. */
case RTX_TERNARY:
- split = find_split_point (&XEXP (x, 2), insn);
+ split = find_split_point (&XEXP (x, 2), insn, false);
if (split)
return split;
/* ... fall through ... */
case RTX_COMM_ARITH:
case RTX_COMPARE:
case RTX_COMM_COMPARE:
- split = find_split_point (&XEXP (x, 1), insn);
+ split = find_split_point (&XEXP (x, 1), insn, false);
if (split)
return split;
/* ... fall through ... */
if (GET_CODE (x) != AND && GET_CODE (XEXP (x, 0)) == AND)
return &XEXP (x, 0);
- split = find_split_point (&XEXP (x, 0), insn);
+ split = find_split_point (&XEXP (x, 0), insn, false);
if (split)
return split;
return loc;
return new_rtx;
if (GET_CODE (x) == SUBREG
- && (GET_CODE (new_rtx) == CONST_INT
+ && (CONST_INT_P (new_rtx)
|| GET_CODE (new_rtx) == CONST_DOUBLE))
{
enum machine_mode mode = GET_MODE (x);
if (! x)
x = gen_rtx_CLOBBER (mode, const0_rtx);
}
- else if (GET_CODE (new_rtx) == CONST_INT
+ else if (CONST_INT_P (new_rtx)
&& GET_CODE (x) == ZERO_EXTEND)
{
x = simplify_unary_operation (ZERO_EXTEND, GET_MODE (x),
/* Likewise, we can make the negate of a comparison operation
if the result values are - STORE_FLAG_VALUE and zero. */
- else if (GET_CODE (true_rtx) == CONST_INT
+ else if (CONST_INT_P (true_rtx)
&& INTVAL (true_rtx) == - STORE_FLAG_VALUE
&& false_rtx == const0_rtx)
x = simplify_gen_unary (NEG, mode,
mode, VOIDmode,
cond, cop1),
mode);
- else if (GET_CODE (false_rtx) == CONST_INT
+ else if (CONST_INT_P (false_rtx)
&& INTVAL (false_rtx) == - STORE_FLAG_VALUE
&& true_rtx == const0_rtx
&& ((reversed = reversed_comparison_code_parts
(neg (sign_extract X 1 Y)) to (zero_extract X 1 Y). */
if (GET_CODE (temp) == ASHIFTRT
- && GET_CODE (XEXP (temp, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (temp, 1))
&& INTVAL (XEXP (temp, 1)) == GET_MODE_BITSIZE (mode) - 1)
return simplify_shift_const (NULL_RTX, LSHIFTRT, mode, XEXP (temp, 0),
INTVAL (XEXP (temp, 1)));
if (GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)
break;
- if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
- GET_MODE_BITSIZE (GET_MODE (XEXP (x, 0)))))
+ if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
SUBST (XEXP (x, 0),
force_to_mode (XEXP (x, 0), GET_MODE (XEXP (x, 0)),
GET_MODE_MASK (mode), 0));
+ /* We can truncate a constant value and return it. */
+ if (CONST_INT_P (XEXP (x, 0)))
+ return gen_int_mode (INTVAL (XEXP (x, 0)), mode);
+
/* Similarly to what we do in simplify-rtx.c, a truncate of a register
whose value is a comparison can be replaced with a subreg if
STORE_FLAG_VALUE permits. */
return gen_lowpart (mode, XEXP (x, 0));
break;
-#ifdef HAVE_cc0
- case COMPARE:
- /* Convert (compare FOO (const_int 0)) to FOO unless we aren't
- using cc0, in which case we want to leave it as a COMPARE
- so we can distinguish it from a register-register-copy. */
- if (XEXP (x, 1) == const0_rtx)
- return XEXP (x, 0);
-
- /* x - 0 is the same as x unless x's mode has signed zeros and
- allows rounding towards -infinity. Under those conditions,
- 0 - 0 is -0. */
- if (!(HONOR_SIGNED_ZEROS (GET_MODE (XEXP (x, 0)))
- && HONOR_SIGN_DEPENDENT_ROUNDING (GET_MODE (XEXP (x, 0))))
- && XEXP (x, 1) == CONST0_RTX (GET_MODE (XEXP (x, 0))))
- return XEXP (x, 0);
- break;
-#endif
-
case CONST:
/* (const (const X)) can become (const X). Do it this way rather than
returning the inner CONST since CONST can be shared with a
sign_extract. The `and' may be a zero_extend and the two
<c>, -<c> constants may be reversed. */
if (GET_CODE (XEXP (x, 0)) == XOR
- && GET_CODE (XEXP (x, 1)) == CONST_INT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (x, 1)) == -INTVAL (XEXP (XEXP (x, 0), 1))
&& ((i = exact_log2 (INTVAL (XEXP (XEXP (x, 0), 1)))) >= 0
|| (i = exact_log2 (INTVAL (XEXP (x, 1)))) >= 0)
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& ((GET_CODE (XEXP (XEXP (x, 0), 0)) == AND
- && GET_CODE (XEXP (XEXP (XEXP (x, 0), 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (XEXP (x, 0), 0), 1))
&& (INTVAL (XEXP (XEXP (XEXP (x, 0), 0), 1))
== ((HOST_WIDE_INT) 1 << (i + 1)) - 1))
|| (GET_CODE (XEXP (XEXP (x, 0), 0)) == ZERO_EXTEND
/* (minus <foo> (and <foo> (const_int -pow2))) becomes
(and <foo> (const_int pow2-1)) */
if (GET_CODE (XEXP (x, 1)) == AND
- && GET_CODE (XEXP (XEXP (x, 1), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 1), 1))
&& exact_log2 (-INTVAL (XEXP (XEXP (x, 1), 1))) >= 0
&& rtx_equal_p (XEXP (XEXP (x, 1), 0), XEXP (x, 0)))
return simplify_and_const_int (NULL_RTX, mode, XEXP (x, 0),
}
/* Try simplify a*(b/c) as (a*b)/c. */
- if (FLOAT_MODE_P (mode) && flag_associative_math
+ if (FLOAT_MODE_P (mode) && flag_associative_math
&& GET_CODE (XEXP (x, 0)) == DIV)
{
rtx tem = simplify_binary_operation (MULT, mode,
case UDIV:
/* If this is a divide by a power of two, treat it as a shift if
its first operand is a shift. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& (i = exact_log2 (INTVAL (XEXP (x, 1)))) >= 0
&& (GET_CODE (XEXP (x, 0)) == ASHIFT
|| GET_CODE (XEXP (x, 0)) == LSHIFTRT
case ROTATE:
case ROTATERT:
/* If this is a shift by a constant amount, simplify it. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT)
+ if (CONST_INT_P (XEXP (x, 1)))
return simplify_shift_const (x, code, mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)));
&& reversed_comparison_code (cond, NULL) != UNKNOWN
&& (true_rtx == pc_rtx
|| (CONSTANT_P (true_rtx)
- && GET_CODE (false_rtx) != CONST_INT && false_rtx != pc_rtx)
+ && !CONST_INT_P (false_rtx) && false_rtx != pc_rtx)
|| true_rtx == const0_rtx
|| (OBJECT_P (true_rtx) && !OBJECT_P (false_rtx))
|| (GET_CODE (true_rtx) == SUBREG && OBJECT_P (SUBREG_REG (true_rtx))
can actually do this more generally, but it doesn't seem worth it. */
if (true_code == NE && XEXP (cond, 1) == const0_rtx
- && false_rtx == const0_rtx && GET_CODE (true_rtx) == CONST_INT
+ && false_rtx == const0_rtx && CONST_INT_P (true_rtx)
&& ((1 == nonzero_bits (XEXP (cond, 0), mode)
&& (i = exact_log2 (INTVAL (true_rtx))) >= 0)
|| ((num_sign_bit_copies (XEXP (cond, 0), mode)
/* (IF_THEN_ELSE (NE REG 0) (0) (8)) is REG for nonzero_bits (REG) == 8. */
if (true_code == NE && XEXP (cond, 1) == const0_rtx
- && false_rtx == const0_rtx && GET_CODE (true_rtx) == CONST_INT
+ && false_rtx == const0_rtx && CONST_INT_P (true_rtx)
&& GET_MODE (XEXP (cond, 0)) == mode
&& (INTVAL (true_rtx) & GET_MODE_MASK (mode))
== nonzero_bits (XEXP (cond, 0), mode)
if (other_changed)
undobuf.other_insn = other_insn;
-#ifdef HAVE_cc0
- /* If we are now comparing against zero, change our source if
- needed. If we do not use cc0, we always have a COMPARE. */
- if (op1 == const0_rtx && dest == cc0_rtx)
- {
- SUBST (SET_SRC (x), op0);
- src = op0;
- }
- else
-#endif
-
/* Otherwise, if we didn't previously have a COMPARE in the
correct mode, we need one. */
if (GET_CODE (src) != COMPARE || GET_MODE (src) != compare_mode)
/* We can call simplify_and_const_int only if we don't lose
any (sign) bits when converting INTVAL (op1) to
"unsigned HOST_WIDE_INT". */
- if (GET_CODE (op1) == CONST_INT
+ if (CONST_INT_P (op1)
&& (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
|| INTVAL (op1) > 0))
{
Even for a mode that is no wider than a const_int,
we can't win, because we need to sign extend one of its bits through
the rest of it, and we don't know which bit. */
- if (GET_CODE (XEXP (x, 0)) == CONST_INT)
+ if (CONST_INT_P (XEXP (x, 0)))
return x;
/* Return if (subreg:MODE FROM 0) is not a safe replacement for
if (GET_CODE (XEXP (x, 0)) == CLOBBER)
return XEXP (x, 0);
- if (GET_CODE (XEXP (x, 1)) != CONST_INT
- || GET_CODE (XEXP (x, 2)) != CONST_INT
+ if (!CONST_INT_P (XEXP (x, 1))
+ || !CONST_INT_P (XEXP (x, 2))
|| GET_MODE (XEXP (x, 0)) == VOIDmode)
return x;
pos = GEN_INT (subreg_lsb (XEXP (SET_DEST (x), 0)));
}
else if (GET_CODE (SET_DEST (x)) == ZERO_EXTRACT
- && GET_CODE (XEXP (SET_DEST (x), 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (SET_DEST (x), 1)))
{
inner = XEXP (SET_DEST (x), 0);
len = INTVAL (XEXP (SET_DEST (x), 1));
pos = XEXP (SET_DEST (x), 2);
/* A constant position should stay within the width of INNER. */
- if (GET_CODE (pos) == CONST_INT
+ if (CONST_INT_P (pos)
&& INTVAL (pos) + len > GET_MODE_BITSIZE (GET_MODE (inner)))
break;
if (BITS_BIG_ENDIAN)
{
- if (GET_CODE (pos) == CONST_INT)
+ if (CONST_INT_P (pos))
pos = GEN_INT (GET_MODE_BITSIZE (GET_MODE (inner)) - len
- INTVAL (pos));
else if (GET_CODE (pos) == MINUS
- && GET_CODE (XEXP (pos, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (pos, 1))
&& (INTVAL (XEXP (pos, 1))
== GET_MODE_BITSIZE (GET_MODE (inner)) - len))
/* If position is ADJUST - X, new position is X. */
inner = SUBREG_REG (inner);
}
else if (GET_CODE (inner) == ASHIFT
- && GET_CODE (XEXP (inner, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (inner, 1))
&& pos_rtx == 0 && pos == 0
&& len > (unsigned HOST_WIDE_INT) INTVAL (XEXP (inner, 1)))
{
inner_mode = GET_MODE (inner);
- if (pos_rtx && GET_CODE (pos_rtx) == CONST_INT)
+ if (pos_rtx && CONST_INT_P (pos_rtx))
pos = INTVAL (pos_rtx), pos_rtx = 0;
/* See if this can be done without an extraction. We never can if the
if (mode == tmode)
return new_rtx;
- if (GET_CODE (new_rtx) == CONST_INT)
- return gen_int_mode (INTVAL (new_rtx), mode);
+ if (CONST_INT_P (new_rtx)
+ || GET_CODE (new_rtx) == CONST_DOUBLE)
+ return simplify_unary_operation (unsignedp ? ZERO_EXTEND : SIGN_EXTEND,
+ mode, new_rtx, tmode);
/* If we know that no extraneous bits are set, and that the high
bit is not set, convert the extraction to the cheaper of
inner = adjust_address_nv (inner, wanted_inner_mode, offset);
}
- /* If INNER is not memory, we can always get it into the proper mode. If we
- are changing its mode, POS must be a constant and smaller than the size
- of the new mode. */
+ /* If INNER is not memory, get it into the proper mode. If we are changing
+ its mode, POS must be a constant and smaller than the size of the new
+ mode. */
else if (!MEM_P (inner))
{
+ /* On the LHS, don't create paradoxical subregs implicitely truncating
+ the register unless TRULY_NOOP_TRUNCATION. */
+ if (in_dest
+ && !TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (GET_MODE (inner)),
+ GET_MODE_BITSIZE (wanted_inner_mode)))
+ return NULL_RTX;
+
if (GET_MODE (inner) != wanted_inner_mode
&& (pos_rtx != 0
|| orig_pos + len > GET_MODE_BITSIZE (wanted_inner_mode)))
- return 0;
+ return NULL_RTX;
if (orig_pos < 0)
- return 0;
+ return NULL_RTX;
inner = force_to_mode (inner, wanted_inner_mode,
pos_rtx
/* This is the shift itself. If it is wide enough, we will return
either the value being shifted if the shift count is equal to
COUNT or a shift for the difference. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= count)
return simplify_shift_const (NULL_RTX, ASHIFT, mode, XEXP (x, 0),
INTVAL (XEXP (x, 1)) - count);
case PLUS: case IOR: case XOR: case AND:
/* If we can safely shift this constant and we find the inner shift,
make a new operation. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& (INTVAL (XEXP (x, 1)) & ((((HOST_WIDE_INT) 1 << count)) - 1)) == 0
&& (tem = extract_left_shift (XEXP (x, 0), count)) != 0)
return simplify_gen_binary (code, mode, tem,
case ASHIFT:
/* Convert shifts by constants into multiplications if inside
an address. */
- if (in_code == MEM && GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (in_code == MEM && CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
&& INTVAL (XEXP (x, 1)) >= 0)
{
case AND:
/* If the second operand is not a constant, we can't do anything
with it. */
- if (GET_CODE (XEXP (x, 1)) != CONST_INT)
+ if (!CONST_INT_P (XEXP (x, 1)))
break;
/* If the constant is a power of two minus one and the first operand
of bits in M, this is an extraction. */
else if (GET_CODE (XEXP (x, 0)) == ROTATE
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& (i = exact_log2 (INTVAL (XEXP (x, 1)) + 1)) >= 0
&& i <= INTVAL (XEXP (XEXP (x, 0), 1)))
{
else if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
&& !have_insn_for (LSHIFTRT, mode)
&& have_insn_for (ASHIFTRT, mode)
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT
&& mode_width <= HOST_BITS_PER_WIDE_INT)
/* If we have (ashiftrt (ashift foo C1) C2) with C2 >= C1,
this is a SIGN_EXTRACT. */
- if (GET_CODE (rhs) == CONST_INT
+ if (CONST_INT_P (rhs)
&& GET_CODE (lhs) == ASHIFT
- && GET_CODE (XEXP (lhs, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (lhs, 1))
&& INTVAL (rhs) >= INTVAL (XEXP (lhs, 1))
&& INTVAL (rhs) < mode_width)
{
if (!OBJECT_P (lhs)
&& ! (GET_CODE (lhs) == SUBREG
&& (OBJECT_P (SUBREG_REG (lhs))))
- && GET_CODE (rhs) == CONST_INT
+ && CONST_INT_P (rhs)
&& INTVAL (rhs) < HOST_BITS_PER_WIDE_INT
&& INTVAL (rhs) < mode_width
&& (new_rtx = extract_left_shift (lhs, INTVAL (rhs))) != 0)
tem = make_compound_operation (SUBREG_REG (x), in_code);
{
- rtx simplified;
- simplified = simplify_subreg (GET_MODE (x), tem, GET_MODE (tem),
- SUBREG_BYTE (x));
+ rtx simplified = simplify_subreg (mode, tem, GET_MODE (SUBREG_REG (x)),
+ SUBREG_BYTE (x));
if (simplified)
tem = simplified;
if (GET_CODE (tem) != GET_CODE (SUBREG_REG (x))
- && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (tem))
+ && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))
&& subreg_lowpart_p (x))
{
rtx newer = force_to_mode (tem, mode, ~(HOST_WIDE_INT) 0,
if (GET_CODE (newer) != SUBREG)
newer = make_compound_operation (newer, in_code);
+ /* force_to_mode can expand compounds. If it just re-expanded the
+ compound use gen_lowpart instead to convert to the desired
+ mode. */
+ if (rtx_equal_p (newer, x))
+ return gen_lowpart (GET_MODE (x), tem);
+
return newer;
}
static rtx
gen_lowpart_or_truncate (enum machine_mode mode, rtx x)
{
- if (GET_MODE_SIZE (GET_MODE (x)) <= GET_MODE_SIZE (mode)
- || TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
- GET_MODE_BITSIZE (GET_MODE (x)))
- || (REG_P (x) && reg_truncated_to_mode (mode, x)))
- return gen_lowpart (mode, x);
- else
- return simplify_gen_unary (TRUNCATE, mode, x, GET_MODE (x));
+ if (!CONST_INT_P (x)
+ && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (x))
+ && !TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
+ GET_MODE_BITSIZE (GET_MODE (x)))
+ && !(REG_P (x) && reg_truncated_to_mode (mode, x)))
+ {
+ /* Bit-cast X into an integer mode. */
+ if (!SCALAR_INT_MODE_P (GET_MODE (x)))
+ x = gen_lowpart (int_mode_for_mode (GET_MODE (x)), x);
+ x = simplify_gen_unary (TRUNCATE, int_mode_for_mode (mode),
+ x, GET_MODE (x));
+ }
+
+ return gen_lowpart (mode, x);
}
/* See if X can be simplified knowing that we will only refer to it in
/* If X is a CONST_INT, return a new one. Do this here since the
test below will fail. */
- if (GET_CODE (x) == CONST_INT)
+ if (CONST_INT_P (x))
{
if (SCALAR_INT_MODE_P (mode))
return gen_int_mode (INTVAL (x) & mask, mode);
&& (GET_MODE_MASK (GET_MODE (x)) & ~mask) == 0)
return gen_lowpart (mode, x);
- /* The arithmetic simplifications here do the wrong thing on vector modes. */
- if (VECTOR_MODE_P (mode) || VECTOR_MODE_P (GET_MODE (x)))
- return gen_lowpart (mode, x);
+ /* We can ignore the effect of a SUBREG if it narrows the mode or
+ if the constant masks to zero all the bits the mode doesn't have. */
+ if (GET_CODE (x) == SUBREG
+ && subreg_lowpart_p (x)
+ && ((GET_MODE_SIZE (GET_MODE (x))
+ < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
+ || (0 == (mask
+ & GET_MODE_MASK (GET_MODE (x))
+ & ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x)))))))
+ return force_to_mode (SUBREG_REG (x), mode, mask, next_select);
+
+ /* The arithmetic simplifications here only work for scalar integer modes. */
+ if (!SCALAR_INT_MODE_P (mode) || !SCALAR_INT_MODE_P (GET_MODE (x)))
+ return gen_lowpart_or_truncate (mode, x);
switch (code)
{
return force_to_mode (x, mode, mask, next_select);
break;
- case SUBREG:
- if (subreg_lowpart_p (x)
- /* We can ignore the effect of this SUBREG if it narrows the mode or
- if the constant masks to zero all the bits the mode doesn't
- have. */
- && ((GET_MODE_SIZE (GET_MODE (x))
- < GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))))
- || (0 == (mask
- & GET_MODE_MASK (GET_MODE (x))
- & ~GET_MODE_MASK (GET_MODE (SUBREG_REG (x)))))))
- return force_to_mode (SUBREG_REG (x), mode, mask, next_select);
- break;
+ case TRUNCATE:
+ /* Similarly for a truncate. */
+ return force_to_mode (XEXP (x, 0), mode, mask, next_select);
case AND:
/* If this is an AND with a constant, convert it into an AND
whose constant is the AND of that constant with MASK. If it
remains an AND of MASK, delete it since it is redundant. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT)
+ if (CONST_INT_P (XEXP (x, 1)))
{
x = simplify_and_const_int (x, op_mode, XEXP (x, 0),
mask & INTVAL (XEXP (x, 1)));
is just some low-order bits. If so, and it is MASK, we don't
need it. */
- if (GET_CODE (x) == AND && GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (GET_CODE (x) == AND && CONST_INT_P (XEXP (x, 1))
&& ((INTVAL (XEXP (x, 1)) & GET_MODE_MASK (GET_MODE (x)))
== mask))
x = XEXP (x, 0);
constant in the AND is wide enough, this might make a
cheaper constant. */
- if (GET_CODE (x) == AND && GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (GET_CODE (x) == AND && CONST_INT_P (XEXP (x, 1))
&& GET_MODE_MASK (GET_MODE (x)) != mask
&& GET_MODE_BITSIZE (GET_MODE (x)) <= HOST_BITS_PER_WIDE_INT)
{
&& (smask & ((HOST_WIDE_INT) 1 << (width - 1))) != 0)
smask |= (HOST_WIDE_INT) -1 << width;
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& exact_log2 (- smask) >= 0
&& (nonzero_bits (XEXP (x, 0), mode) & ~smask) == 0
&& (INTVAL (XEXP (x, 1)) & ~smask) != 0)
case MINUS:
/* If X is (minus C Y) where C's least set bit is larger than any bit
in the mask, then we may replace with (neg Y). */
- if (GET_CODE (XEXP (x, 0)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 0))
&& (((unsigned HOST_WIDE_INT) (INTVAL (XEXP (x, 0))
& -INTVAL (XEXP (x, 0))))
> mask))
/* Similarly, if C contains every bit in the fuller_mask, then we may
replace with (not Y). */
- if (GET_CODE (XEXP (x, 0)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 0))
&& ((INTVAL (XEXP (x, 0)) | (HOST_WIDE_INT) fuller_mask)
== INTVAL (XEXP (x, 0))))
{
constant we form is not wider than the mode of X. */
if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& INTVAL (XEXP (XEXP (x, 0), 1)) < HOST_BITS_PER_WIDE_INT
- && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
&& ((INTVAL (XEXP (XEXP (x, 0), 1))
+ floor_log2 (INTVAL (XEXP (x, 1))))
< GET_MODE_BITSIZE (GET_MODE (x)))
/* For most binary operations, just propagate into the operation and
change the mode if we have an operation of that mode. */
- op0 = gen_lowpart_or_truncate (op_mode,
- force_to_mode (XEXP (x, 0), mode, mask,
- next_select));
- op1 = gen_lowpart_or_truncate (op_mode,
- force_to_mode (XEXP (x, 1), mode, mask,
- next_select));
+ op0 = force_to_mode (XEXP (x, 0), mode, mask, next_select);
+ op1 = force_to_mode (XEXP (x, 1), mode, mask, next_select);
+
+ /* If we ended up truncating both operands, truncate the result of the
+ operation instead. */
+ if (GET_CODE (op0) == TRUNCATE
+ && GET_CODE (op1) == TRUNCATE)
+ {
+ op0 = XEXP (op0, 0);
+ op1 = XEXP (op1, 0);
+ }
+
+ op0 = gen_lowpart_or_truncate (op_mode, op0);
+ op1 = gen_lowpart_or_truncate (op_mode, op1);
if (op_mode != GET_MODE (x) || op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
x = simplify_gen_binary (code, op_mode, op0, op1);
because such a count will have a different meaning in a
wider mode. */
- if (! (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (! (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < GET_MODE_BITSIZE (mode))
&& ! (GET_MODE (XEXP (x, 1)) != VOIDmode
/* If the shift count is a constant and we can do arithmetic in
the mode of the shift, refine which bits we need. Otherwise, use the
conservative form of the mask. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < GET_MODE_BITSIZE (op_mode)
&& GET_MODE_BITSIZE (op_mode) <= HOST_BITS_PER_WIDE_INT)
this shift constant is valid for the host, and we can do arithmetic
in OP_MODE. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT
&& GET_MODE_BITSIZE (op_mode) <= HOST_BITS_PER_WIDE_INT)
{
than a power of two), we can do this with just a shift. */
if (GET_CODE (x) == LSHIFTRT
- && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
/* The shift puts one of the sign bit copies in the least significant
bit. */
&& ((INTVAL (XEXP (x, 1))
those bits, we are requesting a copy of the sign bit and hence can
shift the sign bit to the appropriate location. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT && INTVAL (XEXP (x, 1)) >= 0
+ if (CONST_INT_P (XEXP (x, 1)) && INTVAL (XEXP (x, 1)) >= 0
&& INTVAL (XEXP (x, 1)) < HOST_BITS_PER_WIDE_INT)
{
int i;
something that is still a shift. */
if ((GET_CODE (x) == LSHIFTRT || GET_CODE (x) == ASHIFTRT)
- && GET_CODE (XEXP (x, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0
&& (INTVAL (XEXP (x, 1))
<= GET_MODE_BITSIZE (GET_MODE (x)) - (floor_log2 (mask) + 1))
in the mode of X, compute where the bits we care about are.
Otherwise, we can't do anything. Don't change the mode of
the shift or propagate MODE into the shift, though. */
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) >= 0)
{
temp = simplify_binary_operation (code == ROTATE ? ROTATERT : ROTATE,
GET_MODE (x), GEN_INT (mask),
XEXP (x, 1));
- if (temp && GET_CODE (temp) == CONST_INT)
+ if (temp && CONST_INT_P (temp))
SUBST (XEXP (x, 0),
force_to_mode (XEXP (x, 0), GET_MODE (x),
INTVAL (temp), next_select));
wider than the mode of X. */
if (GET_CODE (XEXP (x, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (x, 0), 1))
&& INTVAL (XEXP (XEXP (x, 0), 1)) >= 0
&& (INTVAL (XEXP (XEXP (x, 0), 1)) + floor_log2 (mask)
< GET_MODE_BITSIZE (GET_MODE (x)))
for a SUBREG. */
if (GET_CODE (src) == AND && GET_CODE (XEXP (src, 0)) == ROTATE
- && GET_CODE (XEXP (XEXP (src, 0), 0)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (src, 0), 0))
&& INTVAL (XEXP (XEXP (src, 0), 0)) == -2
&& rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
&& (GET_MODE_SIZE (GET_MODE (XEXP (src, 0)))
< GET_MODE_SIZE (GET_MODE (SUBREG_REG (XEXP (src, 0)))))
&& GET_CODE (SUBREG_REG (XEXP (src, 0))) == ROTATE
- && GET_CODE (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == CONST_INT
+ && CONST_INT_P (XEXP (SUBREG_REG (XEXP (src, 0)), 0))
&& INTVAL (XEXP (SUBREG_REG (XEXP (src, 0)), 0)) == -2
&& rtx_equal_for_field_assignment_p (dest, XEXP (src, 1)))
{
SRC is an AND with all bits of that field set, then we can discard
the AND. */
if (GET_CODE (dest) == ZERO_EXTRACT
- && GET_CODE (XEXP (dest, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (dest, 1))
&& GET_CODE (src) == AND
- && GET_CODE (XEXP (src, 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (src, 1)))
{
HOST_WIDE_INT width = INTVAL (XEXP (dest, 1));
unsigned HOST_WIDE_INT and_mask = INTVAL (XEXP (src, 1));
lhs = expand_compound_operation (XEXP (src, 1));
if (GET_CODE (rhs) == AND
- && GET_CODE (XEXP (rhs, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (rhs, 1))
&& rtx_equal_for_field_assignment_p (XEXP (rhs, 0), dest))
c1 = INTVAL (XEXP (rhs, 1)), other = lhs;
else if (GET_CODE (lhs) == AND
- && GET_CODE (XEXP (lhs, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (lhs, 1))
&& rtx_equal_for_field_assignment_p (XEXP (lhs, 0), dest))
c1 = INTVAL (XEXP (lhs, 1)), other = rhs;
else
/* If SRC is masked by an AND that does not make a difference in
the value being stored, strip it. */
if (GET_CODE (assign) == ZERO_EXTRACT
- && GET_CODE (XEXP (assign, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (assign, 1))
&& INTVAL (XEXP (assign, 1)) < HOST_BITS_PER_WIDE_INT
&& GET_CODE (src) == AND
- && GET_CODE (XEXP (src, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (src, 1))
&& ((unsigned HOST_WIDE_INT) INTVAL (XEXP (src, 1))
== ((unsigned HOST_WIDE_INT) 1 << INTVAL (XEXP (assign, 1))) - 1))
src = XEXP (src, 0);
enum rtx_code outer_code, inner_code;
rtx decomposed, distributed, inner_op0, inner_op1, new_op0, new_op1, tmp;
+ /* Distributivity is not true for floating point as it can change the
+ value. So we don't do it unless -funsafe-math-optimizations. */
+ if (FLOAT_MODE_P (GET_MODE (x))
+ && ! flag_unsafe_math_optimizations)
+ return NULL_RTX;
+
decomposed = XEXP (x, n);
if (!ARITHMETIC_P (decomposed))
return NULL_RTX;
/* If VAROP is a CONST_INT, then we need to apply the mask in CONSTOP
to VAROP and return the new constant. */
- if (GET_CODE (varop) == CONST_INT)
+ if (CONST_INT_P (varop))
return gen_int_mode (INTVAL (varop) & constop, mode);
/* See what bits may be nonzero in VAROP. Unlike the general case of
instead of this kludge. */
if (GET_MODE_BITSIZE (GET_MODE (x)) < GET_MODE_BITSIZE (mode)
- && GET_CODE (tem) == CONST_INT
+ && CONST_INT_P (tem)
&& INTVAL (tem) > 0
&& 0 != (INTVAL (tem)
& ((HOST_WIDE_INT) 1
return 1;
}
\f
+/* A helper to simplify_shift_const_1 to determine the mode we can perform
+ the shift in. The original shift operation CODE is performed on OP in
+ ORIG_MODE. Return the wider mode MODE if we can perform the operation
+ in that mode. Return ORIG_MODE otherwise. We can also assume that the
+ result of the shift is subject to operation OUTER_CODE with operand
+ OUTER_CONST. */
+
+static enum machine_mode
+try_widen_shift_mode (enum rtx_code code, rtx op, int count,
+ enum machine_mode orig_mode, enum machine_mode mode,
+ enum rtx_code outer_code, HOST_WIDE_INT outer_const)
+{
+ if (orig_mode == mode)
+ return mode;
+ gcc_assert (GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (orig_mode));
+
+ /* In general we can't perform in wider mode for right shift and rotate. */
+ switch (code)
+ {
+ case ASHIFTRT:
+ /* We can still widen if the bits brought in from the left are identical
+ to the sign bit of ORIG_MODE. */
+ if (num_sign_bit_copies (op, mode)
+ > (unsigned) (GET_MODE_BITSIZE (mode)
+ - GET_MODE_BITSIZE (orig_mode)))
+ return mode;
+ return orig_mode;
+
+ case LSHIFTRT:
+ /* Similarly here but with zero bits. */
+ if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
+ && (nonzero_bits (op, mode) & ~GET_MODE_MASK (orig_mode)) == 0)
+ return mode;
+
+ /* We can also widen if the bits brought in will be masked off. This
+ operation is performed in ORIG_MODE. */
+ if (outer_code == AND)
+ {
+ int care_bits = low_bitmask_len (orig_mode, outer_const);
+
+ if (care_bits >= 0
+ && GET_MODE_BITSIZE (orig_mode) - care_bits >= count)
+ return mode;
+ }
+ /* fall through */
+
+ case ROTATE:
+ return orig_mode;
+
+ case ROTATERT:
+ gcc_unreachable ();
+
+ default:
+ return mode;
+ }
+}
+
/* Simplify a shift of VAROP by COUNT bits. CODE says what kind of shift.
The result of the shift is RESULT_MODE. Return NULL_RTX if we cannot
simplify it. Otherwise, return a simplified value.
count = bitsize - count;
}
- /* We need to determine what mode we will do the shift in. If the
- shift is a right shift or a ROTATE, we must always do it in the mode
- it was originally done in. Otherwise, we can do it in MODE, the
- widest mode encountered. */
- shift_mode
- = (code == ASHIFTRT || code == LSHIFTRT || code == ROTATE
- ? result_mode : mode);
+ shift_mode = try_widen_shift_mode (code, varop, count, result_mode,
+ mode, outer_op, outer_const);
/* Handle cases where the count is greater than the size of the mode
minus 1. For ASHIFT, use the size minus one as the count (this can
/* Some machines use MULT instead of ASHIFT because MULT
is cheaper. But it is still better on those machines to
merge two shifts into one. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
case UDIV:
/* Similar, for when divides are cheaper. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& exact_log2 (INTVAL (XEXP (varop, 1))) >= 0)
{
varop
case ROTATE:
/* Here we have two nested shifts. The result is usually the
AND of a new shift with a mask. We compute the result below. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& INTVAL (XEXP (varop, 1)) >= 0
&& INTVAL (XEXP (varop, 1)) < GET_MODE_BITSIZE (GET_MODE (varop))
&& GET_MODE_BITSIZE (result_mode) <= HOST_BITS_PER_WIDE_INT
/* Give up if we can't compute an outer operation to use. */
if (mask_rtx == 0
- || GET_CODE (mask_rtx) != CONST_INT
+ || !CONST_INT_P (mask_rtx)
|| ! merge_outer_ops (&outer_op, &outer_const, AND,
INTVAL (mask_rtx),
result_mode, &complement_p))
B is not a constant. */
else if (GET_CODE (varop) == code
- && GET_CODE (XEXP (varop, 0)) == CONST_INT
- && GET_CODE (XEXP (varop, 1)) != CONST_INT)
+ && CONST_INT_P (XEXP (varop, 0))
+ && !CONST_INT_P (XEXP (varop, 1)))
{
rtx new_rtx = simplify_const_binary_operation (code, mode,
XEXP (varop, 0),
what a ZERO_EXTRACT looks like. Also, some machines have
(and (shift)) insns. */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
/* We can't do this if we have (ashiftrt (xor)) and the
constant has its sign bit set in shift_mode. */
&& !(code == ASHIFTRT && GET_CODE (varop) == XOR
&& (new_rtx = simplify_const_binary_operation (code, result_mode,
XEXP (varop, 1),
GEN_INT (count))) != 0
- && GET_CODE (new_rtx) == CONST_INT
+ && CONST_INT_P (new_rtx)
&& merge_outer_ops (&outer_op, &outer_const, GET_CODE (varop),
INTVAL (new_rtx), result_mode, &complement_p))
{
logical expression, make a new logical expression, and apply
the inverse distributive law. This also can't be done
for some (ashiftrt (xor)). */
- if (GET_CODE (XEXP (varop, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (varop, 1))
&& !(code == ASHIFTRT && GET_CODE (varop) == XOR
&& 0 > trunc_int_for_mode (INTVAL (XEXP (varop, 1)),
shift_mode)))
/* (ashift (plus foo C) N) is (plus (ashift foo N) C'). */
if (code == ASHIFT
- && GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (varop, 1))
&& (new_rtx = simplify_const_binary_operation (ASHIFT, result_mode,
XEXP (varop, 1),
GEN_INT (count))) != 0
- && GET_CODE (new_rtx) == CONST_INT
+ && CONST_INT_P (new_rtx)
&& merge_outer_ops (&outer_op, &outer_const, PLUS,
INTVAL (new_rtx), result_mode, &complement_p))
{
leg for shift(logical). See details in logical handling above
for reasoning in doing so. */
if (code == LSHIFTRT
- && GET_CODE (XEXP (varop, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (varop, 1))
&& mode_signbit_p (result_mode, XEXP (varop, 1))
&& (new_rtx = simplify_const_binary_operation (code, result_mode,
XEXP (varop, 1),
GEN_INT (count))) != 0
- && GET_CODE (new_rtx) == CONST_INT
+ && CONST_INT_P (new_rtx)
&& merge_outer_ops (&outer_op, &outer_const, XOR,
INTVAL (new_rtx), result_mode, &complement_p))
{
&& GET_CODE (XEXP (varop, 0)) == ASHIFTRT
&& count == (GET_MODE_BITSIZE (GET_MODE (varop)) - 1)
&& (code == LSHIFTRT || code == ASHIFTRT)
- && GET_CODE (XEXP (XEXP (varop, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (varop, 0), 1))
&& INTVAL (XEXP (XEXP (varop, 0), 1)) == count
&& rtx_equal_p (XEXP (XEXP (varop, 0), 0), XEXP (varop, 1)))
{
if the truncate does not affect the value. */
if (code == LSHIFTRT
&& GET_CODE (XEXP (varop, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (varop, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (varop, 0), 1))
&& (INTVAL (XEXP (XEXP (varop, 0), 1))
>= (GET_MODE_BITSIZE (GET_MODE (XEXP (varop, 0)))
- GET_MODE_BITSIZE (GET_MODE (varop)))))
break;
}
- /* We need to determine what mode to do the shift in. If the shift is
- a right shift or ROTATE, we must always do it in the mode it was
- originally done in. Otherwise, we can do it in MODE, the widest mode
- encountered. The code we care about is that of the shift that will
- actually be done, not the shift that was originally requested. */
- shift_mode
- = (code == ASHIFTRT || code == LSHIFTRT || code == ROTATE
- ? result_mode : mode);
+ shift_mode = try_widen_shift_mode (code, varop, count, result_mode, mode,
+ outer_op, outer_const);
/* We have now finished analyzing the shift. The result should be
a shift of type CODE with SHIFT_MODE shifting VAROP COUNT places. If
if (REG_P (XEXP (XVECEXP (newpat, 0, i), 0))
&& ! reg_dead_at_p (XEXP (XVECEXP (newpat, 0, i), 0), insn))
return -1;
- if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) != SCRATCH)
+ if (GET_CODE (XEXP (XVECEXP (newpat, 0, i), 0)) != SCRATCH)
{
gcc_assert (REG_P (XEXP (XVECEXP (newpat, 0, i), 0)));
- notes = gen_rtx_EXPR_LIST (REG_UNUSED,
- XEXP (XVECEXP (newpat, 0, i), 0), notes);
+ notes = alloc_reg_note (REG_UNUSED,
+ XEXP (XVECEXP (newpat, 0, i), 0), notes);
}
}
pat = newpat;
constant integer or has a mode the same size. */
if (GET_MODE_SIZE (omode) > UNITS_PER_WORD
&& ! ((imode == VOIDmode
- && (GET_CODE (x) == CONST_INT
+ && (CONST_INT_P (x)
|| GET_CODE (x) == CONST_DOUBLE))
|| isize == osize))
goto fail;
&& GET_CODE (XEXP (XEXP (op1, 0), 0)) == SUBREG
&& (GET_MODE (SUBREG_REG (XEXP (XEXP (op0, 0), 0)))
== GET_MODE (SUBREG_REG (XEXP (XEXP (op1, 0), 0))))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& XEXP (op0, 1) == XEXP (op1, 1)
&& XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
&& XEXP (op0, 1) == XEXP (XEXP (op1, 0), 1)
|| (GET_CODE (op0) == ASHIFTRT
&& (code != GTU && code != LTU
&& code != GEU && code != LEU)))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& INTVAL (XEXP (op0, 1)) >= 0
&& INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT
&& XEXP (op0, 1) == XEXP (op1, 1))
present. */
else if (GET_CODE (op0) == AND && GET_CODE (op1) == AND
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
- && GET_CODE (XEXP (op1, 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (op0, 1))
+ && CONST_INT_P (XEXP (op1, 1)))
{
rtx inner_op0 = XEXP (op0, 0);
rtx inner_op1 = XEXP (op1, 0);
but some things may really be comparisons with zero but not start
out looking that way. */
- while (GET_CODE (op1) == CONST_INT)
+ while (CONST_INT_P (op1))
{
enum machine_mode mode = GET_MODE (op0);
unsigned int mode_width = GET_MODE_BITSIZE (mode);
/* Except we can't if SHIFT_COUNT_TRUNCATED is set, since we might
have already reduced the shift count modulo the word size. */
if (!SHIFT_COUNT_TRUNCATED
- && GET_CODE (XEXP (op0, 0)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 0))
&& XEXP (op0, 1) == const1_rtx
&& equality_comparison_p && const_op == 0
&& (i = exact_log2 (INTVAL (XEXP (op0, 0)))) >= 0)
case ROTATE:
/* If we are testing equality and our count is a constant, we
can perform the inverse operation on our RHS. */
- if (equality_comparison_p && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (equality_comparison_p && CONST_INT_P (XEXP (op0, 1))
&& (tem = simplify_binary_operation (ROTATERT, mode,
op1, XEXP (op0, 1))) != 0)
{
a particular bit. Convert it to an AND of a constant of that
bit. This will be converted into a ZERO_EXTRACT. */
if (const_op == 0 && sign_bit_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT)
{
op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0),
&& subreg_lowpart_p (op0)
&& GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0))) > mode_width
&& GET_CODE (SUBREG_REG (op0)) == PLUS
- && GET_CODE (XEXP (SUBREG_REG (op0), 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (SUBREG_REG (op0), 1)))
{
enum machine_mode inner_mode = GET_MODE (SUBREG_REG (op0));
rtx a = XEXP (SUBREG_REG (op0), 0);
/* The sign bit of (minus (ashiftrt X C) X), where C is the number
of bits in X minus 1, is one iff X > 0. */
if (sign_bit_comparison_p && GET_CODE (XEXP (op0, 0)) == ASHIFTRT
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
&& (unsigned HOST_WIDE_INT) INTVAL (XEXP (XEXP (op0, 0), 1))
== mode_width - 1
&& rtx_equal_p (XEXP (XEXP (op0, 0), 0), XEXP (op0, 1)))
in STORE_FLAG_VALUE, we can compare with X. */
if (const_op == 0 && equality_comparison_p
&& mode_width <= HOST_BITS_PER_WIDE_INT
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& GET_CODE (XEXP (op0, 0)) == LSHIFTRT
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
&& INTVAL (XEXP (XEXP (op0, 0), 1)) >= 0
&& INTVAL (XEXP (XEXP (op0, 0), 1)) < HOST_BITS_PER_WIDE_INT)
{
the underlying value. */
if (equality_comparison_p
&& const_op == 0
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT
&& ((INTVAL (XEXP (op0, 1)) & GET_MODE_MASK (mode))
== (unsigned HOST_WIDE_INT) 1 << (mode_width - 1)))
known to hold a value of the required mode the
transformation is invalid. */
if ((equality_comparison_p || unsigned_comparison_p)
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& (i = exact_log2 ((INTVAL (XEXP (op0, 1))
& GET_MODE_MASK (mode))
+ 1)) >= 0
#endif
|| (mode_width <= GET_MODE_BITSIZE (tmode)
&& subreg_lowpart_p (XEXP (op0, 0))))
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT
&& GET_MODE_BITSIZE (tmode) <= HOST_BITS_PER_WIDE_INT
&& ((c1 = INTVAL (XEXP (op0, 1))) & ~mask) == 0
if (GET_CODE (shift_op) == NOT
|| (GET_CODE (shift_op) == XOR
- && GET_CODE (XEXP (shift_op, 1)) == CONST_INT
- && GET_CODE (shift_count) == CONST_INT
+ && CONST_INT_P (XEXP (shift_op, 1))
+ && CONST_INT_P (shift_count)
&& GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& (INTVAL (XEXP (shift_op, 1))
== (HOST_WIDE_INT) 1 << INTVAL (shift_count))))
are known to be zero, we can do this by comparing FOO with C
shifted right N bits so long as the low-order N bits of C are
zero. */
- if (GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (op0, 1))
&& INTVAL (XEXP (op0, 1)) >= 0
&& ((INTVAL (XEXP (op0, 1)) + ! equality_comparison_p)
< HOST_BITS_PER_WIDE_INT)
/* If we are doing a sign bit comparison, it means we are testing
a particular bit. Convert it to the appropriate AND. */
- if (sign_bit_comparison_p && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (sign_bit_comparison_p && CONST_INT_P (XEXP (op0, 1))
&& mode_width <= HOST_BITS_PER_WIDE_INT)
{
op0 = simplify_and_const_int (NULL_RTX, mode, XEXP (op0, 0),
the low bit to the sign bit, we can convert this to an AND of the
low-order bit. */
if (const_op == 0 && equality_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& (unsigned HOST_WIDE_INT) INTVAL (XEXP (op0, 1))
== mode_width - 1)
{
/* If this is an equality comparison with zero, we can do this
as a logical shift, which might be much simpler. */
if (equality_comparison_p && const_op == 0
- && GET_CODE (XEXP (op0, 1)) == CONST_INT)
+ && CONST_INT_P (XEXP (op0, 1)))
{
op0 = simplify_shift_const (NULL_RTX, LSHIFTRT, mode,
XEXP (op0, 0),
/* If OP0 is a sign extension and CODE is not an unsigned comparison,
do the comparison in a narrower mode. */
if (! unsigned_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& GET_CODE (XEXP (op0, 0)) == ASHIFT
&& XEXP (op0, 1) == XEXP (XEXP (op0, 0), 1)
&& (tmode = mode_for_size (mode_width - INTVAL (XEXP (op0, 1)),
constant, which is usually represented with the PLUS
between the shifts. */
if (! unsigned_comparison_p
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& GET_CODE (XEXP (op0, 0)) == PLUS
- && GET_CODE (XEXP (XEXP (op0, 0), 1)) == CONST_INT
+ && CONST_INT_P (XEXP (XEXP (op0, 0), 1))
&& GET_CODE (XEXP (XEXP (op0, 0), 0)) == ASHIFT
&& XEXP (op0, 1) == XEXP (XEXP (XEXP (op0, 0), 0), 1)
&& (tmode = mode_for_size (mode_width - INTVAL (XEXP (op0, 1)),
the low order N bits of FOO are known to be zero, we can do this
by comparing FOO with C shifted left N bits so long as no
overflow occurs. */
- if (GET_CODE (XEXP (op0, 1)) == CONST_INT
+ if (CONST_INT_P (XEXP (op0, 1))
&& INTVAL (XEXP (op0, 1)) >= 0
&& INTVAL (XEXP (op0, 1)) < HOST_BITS_PER_WIDE_INT
&& mode_width <= HOST_BITS_PER_WIDE_INT
can replace this with an LT or GE comparison. */
if (const_op == 0
&& (equality_comparison_p || sign_bit_comparison_p)
- && GET_CODE (XEXP (op0, 1)) == CONST_INT
+ && CONST_INT_P (XEXP (op0, 1))
&& (unsigned HOST_WIDE_INT) INTVAL (XEXP (op0, 1))
== mode_width - 1)
{
{
int zero_extended;
+ /* If this is a test for negative, we can make an explicit
+ test of the sign bit. Test this first so we can use
+ a paradoxical subreg to extend OP0. */
+
+ if (op1 == const0_rtx && (code == LT || code == GE)
+ && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
+ {
+ op0 = simplify_gen_binary (AND, tmode,
+ gen_lowpart (tmode, op0),
+ GEN_INT ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode)
+ - 1)));
+ code = (code == LT) ? NE : EQ;
+ break;
+ }
+
/* If the only nonzero bits in OP0 and OP1 are those in the
narrower mode and this is an equality or unsigned comparison,
we can use the wider mode. Similarly for sign-extended
|| code == LEU || code == LTU)
&& (nonzero_bits (op0, tmode)
& ~GET_MODE_MASK (mode)) == 0
- && ((GET_CODE (op1) == CONST_INT
+ && ((CONST_INT_P (op1)
|| (nonzero_bits (op1, tmode)
& ~GET_MODE_MASK (mode)) == 0)));
XEXP (op0, 0)),
gen_lowpart (tmode,
XEXP (op0, 1)));
-
- op0 = gen_lowpart (tmode, op0);
- if (zero_extended && GET_CODE (op1) == CONST_INT)
- op1 = GEN_INT (INTVAL (op1) & GET_MODE_MASK (mode));
- op1 = gen_lowpart (tmode, op1);
- break;
- }
-
- /* If this is a test for negative, we can make an explicit
- test of the sign bit. */
-
- if (op1 == const0_rtx && (code == LT || code == GE)
- && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT)
- {
- op0 = simplify_gen_binary (AND, tmode,
- gen_lowpart (tmode, op0),
- GEN_INT ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (mode)
- - 1)));
- code = (code == LT) ? NE : EQ;
- break;
+ else
+ {
+ if (zero_extended)
+ {
+ op0 = simplify_gen_unary (ZERO_EXTEND, tmode, op0, mode);
+ op1 = simplify_gen_unary (ZERO_EXTEND, tmode, op1, mode);
+ }
+ else
+ {
+ op0 = simplify_gen_unary (SIGN_EXTEND, tmode, op0, mode);
+ op1 = simplify_gen_unary (SIGN_EXTEND, tmode, op1, mode);
+ }
+ break;
+ }
}
}
rsp->last_set = insn;
rsp->last_set_value = 0;
- rsp->last_set_mode = 0;
+ rsp->last_set_mode = VOIDmode;
rsp->last_set_nonzero_bits = 0;
rsp->last_set_sign_bit_copies = 0;
rsp->last_death = 0;
- rsp->truncated_to_mode = 0;
+ rsp->truncated_to_mode = VOIDmode;
}
/* Mark registers that are being referenced in this value. */
case, we must replace it with (clobber (const_int 0)) to prevent
infinite loops. */
rsp = VEC_index (reg_stat_type, reg_stat, regno);
- if (value && ! get_last_value_validate (&value, insn,
- rsp->last_set_label, 0))
+ if (value && !get_last_value_validate (&value, insn, label_tick, 0))
{
value = copy_rtx (value);
- if (! get_last_value_validate (&value, insn,
- rsp->last_set_label, 1))
+ if (!get_last_value_validate (&value, insn, label_tick, 1))
value = 0;
}
rsp->last_set_invalid = 1;
rsp->last_set = insn;
rsp->last_set_value = 0;
- rsp->last_set_mode = 0;
+ rsp->last_set_mode = VOIDmode;
rsp->last_set_nonzero_bits = 0;
rsp->last_set_sign_bit_copies = 0;
rsp->last_death = 0;
- rsp->truncated_to_mode = 0;
+ rsp->truncated_to_mode = VOIDmode;
}
last_call_luid = mem_last_set = DF_INSN_LUID (insn);
}
}
\f
-/* Utility routine for the following function. Verify that all the registers
- mentioned in *LOC are valid when *LOC was part of a value set when
- label_tick == TICK. Return 0 if some are not.
-
- If REPLACE is nonzero, replace the invalid reference with
- (clobber (const_int 0)) and return 1. This replacement is useful because
- we often can get useful information about the form of a value (e.g., if
- it was produced by a shift that always produces -1 or 0) even though
- we don't know exactly what registers it was produced from. */
+/* Verify that all the registers and memory references mentioned in *LOC are
+ still valid. *LOC was part of a value set in INSN when label_tick was
+ equal to TICK. Return 0 if some are not. If REPLACE is nonzero, replace
+ the invalid references with (clobber (const_int 0)) and return 1. This
+ replacement is useful because we often can get useful information about
+ the form of a value (e.g., if it was produced by a shift that always
+ produces -1 or 0) even though we don't know exactly what registers it
+ was produced from. */
static int
get_last_value_validate (rtx *loc, rtx insn, int tick, int replace)
return 1;
}
- /* If this is a memory reference, make sure that there were
- no stores after it that might have clobbered the value. We don't
- have alias info, so we assume any store invalidates it. */
+ /* If this is a memory reference, make sure that there were no stores after
+ it that might have clobbered the value. We don't have alias info, so we
+ assume any store invalidates it. Moreover, we only have local UIDs, so
+ we also assume that there were stores in the intervening basic blocks. */
else if (MEM_P (x) && !MEM_READONLY_P (x)
- && DF_INSN_LUID (insn) <= mem_last_set)
+ && (tick != label_tick || DF_INSN_LUID (insn) <= mem_last_set))
{
if (replace)
*loc = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
return 0;
/* If the value has all its registers valid, return it. */
- if (get_last_value_validate (&value, rsp->last_set,
- rsp->last_set_label, 0))
+ if (get_last_value_validate (&value, rsp->last_set, rsp->last_set_label, 0))
return value;
/* Otherwise, make a copy and replace any invalid register with
(clobber (const_int 0)). If that fails for some reason, return 0. */
value = copy_rtx (value);
- if (get_last_value_validate (&value, rsp->last_set,
- rsp->last_set_label, 1))
+ if (get_last_value_validate (&value, rsp->last_set, rsp->last_set_label, 1))
return value;
return 0;
return;
if (where_dead
+ && BLOCK_FOR_INSN (where_dead) == BLOCK_FOR_INSN (to_insn)
&& DF_INSN_LUID (where_dead) >= from_luid
&& DF_INSN_LUID (where_dead) < DF_INSN_LUID (to_insn))
{
*pnotes = note;
}
else
- *pnotes = gen_rtx_EXPR_LIST (REG_DEAD, x, *pnotes);
+ *pnotes = alloc_reg_note (REG_DEAD, x, *pnotes);
}
return;
return 0;
}
+
+/* Return the next insn after INSN that is neither a NOTE nor a
+ DEBUG_INSN. This routine does not look inside SEQUENCEs. */
+
+static rtx
+next_nonnote_nondebug_insn (rtx insn)
+{
+ while (insn)
+ {
+ insn = NEXT_INSN (insn);
+ if (insn == 0)
+ break;
+ if (NOTE_P (insn))
+ continue;
+ if (DEBUG_INSN_P (insn))
+ continue;
+ break;
+ }
+
+ return insn;
+}
+
+
\f
/* Given a chain of REG_NOTES originally from FROM_INSN, try to place them
as appropriate. I3 and I2 are the insns resulting from the combination
place = i2;
else
{
- gcc_assert (flag_non_call_exceptions);
+ gcc_assert (cfun->can_throw_non_call_exceptions);
if (may_trap_p (i3))
place = i3;
else if (i2 && may_trap_p (i2))
place = from_insn;
else if (reg_referenced_p (XEXP (note, 0), PATTERN (i3)))
place = i3;
- else if (i2 != 0 && next_nonnote_insn (i2) == i3
+ else if (i2 != 0 && next_nonnote_nondebug_insn (i2) == i3
&& reg_referenced_p (XEXP (note, 0), PATTERN (i2)))
place = i2;
else if ((rtx_equal_p (XEXP (note, 0), elim_i2)
for (tem = PREV_INSN (tem); place == 0; tem = PREV_INSN (tem))
{
- if (! INSN_P (tem))
+ if (!NONDEBUG_INSN_P (tem))
{
if (tem == BB_HEAD (bb))
break;
&& ! reg_bitfield_target_p (piece,
PATTERN (place)))
{
- rtx new_note
- = gen_rtx_EXPR_LIST (REG_DEAD, piece, NULL_RTX);
+ rtx new_note = alloc_reg_note (REG_DEAD, piece,
+ NULL_RTX);
distribute_notes (new_note, place, place,
NULL_RTX, NULL_RTX, NULL_RTX);
for (tem = PREV_INSN (place); ;
tem = PREV_INSN (tem))
{
- if (! INSN_P (tem))
+ if (!NONDEBUG_INSN_P (tem))
{
if (tem == BB_HEAD (bb))
break;
}
if (place2)
- REG_NOTES (place2)
- = gen_rtx_fmt_ee (GET_CODE (note), REG_NOTE_KIND (note),
- XEXP (note, 0), REG_NOTES (place2));
+ add_reg_note (place2, REG_NOTE_KIND (note), XEXP (note, 0));
}
}
\f
(insn && (this_basic_block->next_bb == EXIT_BLOCK_PTR
|| BB_HEAD (this_basic_block->next_bb) != insn));
insn = NEXT_INSN (insn))
- if (INSN_P (insn) && reg_overlap_mentioned_p (reg, PATTERN (insn)))
+ if (DEBUG_INSN_P (insn))
+ continue;
+ else if (INSN_P (insn) && reg_overlap_mentioned_p (reg, PATTERN (insn)))
{
if (reg_referenced_p (reg, PATTERN (insn)))
place = insn;
TODO_ggc_collect, /* todo_flags_finish */
}
};
-