/* Control flow optimization code for GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/* This file contains optimizer of the control flow. The main entry point is
cleanup_cfg. Following optimizations are performed:
#include "tree-pass.h"
#include "cfgloop.h"
#include "expr.h"
+#include "df.h"
+#include "dce.h"
+#include "dbgcnt.h"
#define FORWARDER_BLOCK_P(BB) ((BB)->flags & BB_FORWARDER_BLOCK)
-
+
/* Set to true when we are running first pass of try_optimize_cfg loop. */
static bool first_pass;
+
+/* Set to true if crossjumps occured in the latest run of try_optimize_cfg. */
+static bool crossjumps_occured;
+
static bool try_crossjump_to_edge (int, edge, edge);
static bool try_crossjump_bb (int, basic_block);
-static bool outgoing_edges_match (int *, struct equiv_info *);
+static bool outgoing_edges_match (int, basic_block, basic_block);
+static int flow_find_cross_jump (int, basic_block, basic_block, rtx *, rtx *);
+static bool old_insns_match_p (int, rtx, rtx);
static void merge_blocks_move_predecessor_nojumps (basic_block, basic_block);
static void merge_blocks_move_successor_nojumps (basic_block, basic_block);
static bool try_optimize_cfg (int);
static bool try_simplify_condjump (basic_block);
static bool try_forward_edges (int, basic_block);
-static edge thread_jump (int, edge, basic_block);
+static edge thread_jump (edge, basic_block);
static bool mark_effect (rtx, bitmap);
static void notice_new_block (basic_block);
static void update_forwarder_flag (basic_block);
static int mentions_nonequal_regs (rtx *, void *);
+static void merge_memattrs (rtx, rtx);
\f
/* Set flags for newly created block. */
/* If we are partitioning hot/cold basic blocks, we don't want to
mess up unconditional or indirect jumps that cross between hot
- and cold sections.
+ and cold sections.
Basic block partitioning may result in some jumps that appear to
- be optimizable (or blocks that appear to be mergeable), but which really
- must be left untouched (they are required to make it safely across
- partition boundaries). See the comments at the top of
+ be optimizable (or blocks that appear to be mergeable), but which really
+ must be left untouched (they are required to make it safely across
+ partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
if (BB_PARTITION (jump_block) != BB_PARTITION (jump_dest_block)
switch (GET_CODE (exp))
{
/* In case we do clobber the register, mark it as equal, as we know the
- value is dead so it don't have to match. */
+ value is dead so it don't have to match. */
case CLOBBER:
if (REG_P (XEXP (exp, 0)))
{
if exist, NULL otherwise. */
static edge
-thread_jump (int mode, edge e, basic_block b)
+thread_jump (edge e, basic_block b)
{
rtx set1, set2, cond1, cond2, insn;
enum rtx_code code1, code2, reversed_code2;
if (for_each_rtx (&cond2, mentions_nonequal_regs, nonequal))
goto failed_exit;
- /* In case liveness information is available, we need to prove equivalence
- only of the live values. */
- if (mode & CLEANUP_UPDATE_LIFE)
- AND_REG_SET (nonequal, b->il.rtl->global_live_at_end);
-
EXECUTE_IF_SET_IN_REG_SET (nonequal, 0, i, rsi)
goto failed_exit;
/* If we are partitioning hot/cold basic blocks, we don't want to
mess up unconditional or indirect jumps that cross between hot
- and cold sections.
-
+ and cold sections.
+
Basic block partitioning may result in some jumps that appear to
be optimizable (or blocks that appear to be mergeable), but which really m
- ust be left untouched (they are required to make it safely across
- partition boundaries). See the comments at the top of
+ ust be left untouched (they are required to make it safely across
+ partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
if (find_reg_note (BB_END (b), REG_CROSSING_JUMP, NULL_RTX))
int counter;
bool threaded = false;
int nthreaded_edges = 0;
- bool may_thread = first_pass | (b->flags & BB_DIRTY);
+ bool may_thread = first_pass | df_get_bb_dirty (b);
/* Skip complex edges because we don't know how to update them.
- Still handle fallthru edges, as we can succeed to forward fallthru
- edge to the same place as the branch edge of conditional branch
- and turn conditional branch to an unconditional branch. */
+ Still handle fallthru edges, as we can succeed to forward fallthru
+ edge to the same place as the branch edge of conditional branch
+ and turn conditional branch to an unconditional branch. */
if (e->flags & EDGE_COMPLEX)
{
ei_next (&ei);
up jumps that cross between hot/cold sections.
Basic block partitioning may result in some jumps that appear
- to be optimizable (or blocks that appear to be mergeable), but which
- really must be left untouched (they are required to make it safely
+ to be optimizable (or blocks that appear to be mergeable), but which
+ really must be left untouched (they are required to make it safely
across partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete
details. */
{
basic_block new_target = NULL;
bool new_target_threaded = false;
- may_thread |= target->flags & BB_DIRTY;
+ may_thread |= df_get_bb_dirty (target);
if (FORWARDER_BLOCK_P (target)
- && !(single_succ_edge (target)->flags & EDGE_CROSSING)
+ && !(single_succ_edge (target)->flags & EDGE_CROSSING)
&& single_succ (target) != EXIT_BLOCK_PTR)
{
/* Bypass trivial infinite loops. */
of probabilities. */
else if ((mode & CLEANUP_THREADING) && may_thread)
{
- edge t = thread_jump (mode, e, target);
+ edge t = thread_jump (e, target);
if (t)
{
if (!threaded_edges)
- threaded_edges = xmalloc (sizeof (*threaded_edges)
- * n_basic_blocks);
+ threaded_edges = XNEWVEC (edge, n_basic_blocks);
else
{
int i;
if (!new_target)
break;
- /* Avoid killing of loop pre-headers, as it is the place loop
- optimizer wants to hoist code to.
-
- For fallthru forwarders, the LOOP_BEG note must appear between
- the header of block and CODE_LABEL of the loop, for non forwarders
- it must appear before the JUMP_INSN. */
- if ((mode & CLEANUP_PRE_LOOP) && optimize && flag_loop_optimize)
- {
- rtx insn = (EDGE_SUCC (target, 0)->flags & EDGE_FALLTHRU
- ? BB_HEAD (target) : prev_nonnote_insn (BB_END (target)));
-
- if (!NOTE_P (insn))
- insn = NEXT_INSN (insn);
-
- for (; insn && !LABEL_P (insn) && !INSN_P (insn);
- insn = NEXT_INSN (insn))
- if (NOTE_P (insn)
- && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- break;
-
- if (insn && NOTE_P (insn))
- break;
-
- /* Do not clean up branches to just past the end of a loop
- at this time; it can mess up the loop optimizer's
- recognition of some patterns. */
-
- insn = PREV_INSN (BB_HEAD (target));
- if (insn && NOTE_P (insn)
- && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- break;
- }
-
counter++;
target = new_target;
threaded |= new_target_threaded;
merge_blocks_move_predecessor_nojumps (basic_block a, basic_block b)
{
rtx barrier;
- bool only_notes;
/* If we are partitioning hot/cold basic blocks, we don't want to
mess up unconditional or indirect jumps that cross between hot
and cold sections.
-
+
Basic block partitioning may result in some jumps that appear to
- be optimizable (or blocks that appear to be mergeable), but which really
- must be left untouched (they are required to make it safely across
- partition boundaries). See the comments at the top of
+ be optimizable (or blocks that appear to be mergeable), but which really
+ must be left untouched (they are required to make it safely across
+ partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
if (BB_PARTITION (a) != BB_PARTITION (b))
gcc_assert (BARRIER_P (barrier));
delete_insn (barrier);
- /* Move block and loop notes out of the chain so that we do not
- disturb their order.
-
- ??? A better solution would be to squeeze out all the non-nested notes
- and adjust the block trees appropriately. Even better would be to have
- a tighter connection between block trees and rtl so that this is not
- necessary. */
- only_notes = squeeze_notes (&BB_HEAD (a), &BB_END (a));
- gcc_assert (!only_notes);
-
/* Scramble the insn chain. */
if (BB_END (a) != PREV_INSN (BB_HEAD (b)))
reorder_insns_nobb (BB_HEAD (a), BB_END (a), PREV_INSN (BB_HEAD (b)));
- a->flags |= BB_DIRTY;
+ df_set_bb_dirty (a);
if (dump_file)
fprintf (dump_file, "Moved block %d before %d and merged.\n",
{
rtx barrier, real_b_end;
rtx label, table;
- bool only_notes;
/* If we are partitioning hot/cold basic blocks, we don't want to
mess up unconditional or indirect jumps that cross between hot
- and cold sections.
-
+ and cold sections.
+
Basic block partitioning may result in some jumps that appear to
- be optimizable (or blocks that appear to be mergeable), but which really
- must be left untouched (they are required to make it safely across
- partition boundaries). See the comments at the top of
+ be optimizable (or blocks that appear to be mergeable), but which really
+ must be left untouched (they are required to make it safely across
+ partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
if (BB_PARTITION (a) != BB_PARTITION (b))
if (barrier && BARRIER_P (barrier))
delete_insn (barrier);
- /* Move block and loop notes out of the chain so that we do not
- disturb their order.
-
- ??? A better solution would be to squeeze out all the non-nested notes
- and adjust the block trees appropriately. Even better would be to have
- a tighter connection between block trees and rtl so that this is not
- necessary. */
- only_notes = squeeze_notes (&BB_HEAD (b), &BB_END (b));
- gcc_assert (!only_notes);
-
/* Scramble the insn chain. */
reorder_insns_nobb (BB_HEAD (b), BB_END (b), BB_END (a));
/* If we are partitioning hot/cold basic blocks, we don't want to
mess up unconditional or indirect jumps that cross between hot
- and cold sections.
-
+ and cold sections.
+
Basic block partitioning may result in some jumps that appear to
- be optimizable (or blocks that appear to be mergeable), but which really
- must be left untouched (they are required to make it safely across
- partition boundaries). See the comments at the top of
+ be optimizable (or blocks that appear to be mergeable), but which really
+ must be left untouched (they are required to make it safely across
+ partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
if (BB_PARTITION (b) != BB_PARTITION (c))
return NULL;
-
-
/* If B has a fallthru edge to C, no need to move anything. */
if (e->flags & EDGE_FALLTHRU)
edge_iterator ei;
/* Avoid overactive code motion, as the forwarder blocks should be
- eliminated by edge redirection instead. One exception might have
+ eliminated by edge redirection instead. One exception might have
been if B is a forwarder block and C has no fallthru edge, but
that should be cleaned up by bb-reorder instead. */
if (FORWARDER_BLOCK_P (b) || FORWARDER_BLOCK_P (c))
if (! c_has_outgoing_fallthru)
{
merge_blocks_move_successor_nojumps (b, c);
- return next == ENTRY_BLOCK_PTR ? next->next_bb : next;
+ return next == ENTRY_BLOCK_PTR ? next->next_bb : next;
}
/* If B does not have an incoming fallthru, then it can be moved
return NULL;
}
\f
-/* Return true iff the condbranches at the end of BB1 and BB2 match. */
-bool
-condjump_equiv_p (struct equiv_info *info, bool call_init)
+
+/* Removes the memory attributes of MEM expression
+ if they are not equal. */
+
+void
+merge_memattrs (rtx x, rtx y)
+{
+ int i;
+ int j;
+ enum rtx_code code;
+ const char *fmt;
+
+ if (x == y)
+ return;
+ if (x == 0 || y == 0)
+ return;
+
+ code = GET_CODE (x);
+
+ if (code != GET_CODE (y))
+ return;
+
+ if (GET_MODE (x) != GET_MODE (y))
+ return;
+
+ if (code == MEM && MEM_ATTRS (x) != MEM_ATTRS (y))
+ {
+ if (! MEM_ATTRS (x))
+ MEM_ATTRS (y) = 0;
+ else if (! MEM_ATTRS (y))
+ MEM_ATTRS (x) = 0;
+ else
+ {
+ rtx mem_size;
+
+ if (MEM_ALIAS_SET (x) != MEM_ALIAS_SET (y))
+ {
+ set_mem_alias_set (x, 0);
+ set_mem_alias_set (y, 0);
+ }
+
+ if (! mem_expr_equal_p (MEM_EXPR (x), MEM_EXPR (y)))
+ {
+ set_mem_expr (x, 0);
+ set_mem_expr (y, 0);
+ set_mem_offset (x, 0);
+ set_mem_offset (y, 0);
+ }
+ else if (MEM_OFFSET (x) != MEM_OFFSET (y))
+ {
+ set_mem_offset (x, 0);
+ set_mem_offset (y, 0);
+ }
+
+ if (!MEM_SIZE (x))
+ mem_size = NULL_RTX;
+ else if (!MEM_SIZE (y))
+ mem_size = NULL_RTX;
+ else
+ mem_size = GEN_INT (MAX (INTVAL (MEM_SIZE (x)),
+ INTVAL (MEM_SIZE (y))));
+ set_mem_size (x, mem_size);
+ set_mem_size (y, mem_size);
+
+ set_mem_align (x, MIN (MEM_ALIGN (x), MEM_ALIGN (y)));
+ set_mem_align (y, MEM_ALIGN (x));
+ }
+ }
+
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ switch (fmt[i])
+ {
+ case 'E':
+ /* Two vectors must have the same length. */
+ if (XVECLEN (x, i) != XVECLEN (y, i))
+ return;
+
+ for (j = 0; j < XVECLEN (x, i); j++)
+ merge_memattrs (XVECEXP (x, i, j), XVECEXP (y, i, j));
+
+ break;
+
+ case 'e':
+ merge_memattrs (XEXP (x, i), XEXP (y, i));
+ }
+ }
+ return;
+}
+
+
+/* Return true if I1 and I2 are equivalent and thus can be crossjumped. */
+
+static bool
+old_insns_match_p (int mode ATTRIBUTE_UNUSED, rtx i1, rtx i2)
{
- basic_block bb1 = info->x_block;
- basic_block bb2 = info->y_block;
- edge b1 = BRANCH_EDGE (bb1);
- edge b2 = BRANCH_EDGE (bb2);
- edge f1 = FALLTHRU_EDGE (bb1);
- edge f2 = FALLTHRU_EDGE (bb2);
- bool reverse, match;
- rtx set1, set2, cond1, cond2;
- rtx src1, src2;
- enum rtx_code code1, code2;
-
- /* Get around possible forwarders on fallthru edges. Other cases
- should be optimized out already. */
- if (FORWARDER_BLOCK_P (f1->dest))
- f1 = single_succ_edge (f1->dest);
-
- if (FORWARDER_BLOCK_P (f2->dest))
- f2 = single_succ_edge (f2->dest);
-
- /* To simplify use of this function, return false if there are
- unneeded forwarder blocks. These will get eliminated later
- during cleanup_cfg. */
- if (FORWARDER_BLOCK_P (f1->dest)
- || FORWARDER_BLOCK_P (f2->dest)
- || FORWARDER_BLOCK_P (b1->dest)
- || FORWARDER_BLOCK_P (b2->dest))
+ rtx p1, p2;
+
+ /* Verify that I1 and I2 are equivalent. */
+ if (GET_CODE (i1) != GET_CODE (i2))
return false;
- if (f1->dest == f2->dest && b1->dest == b2->dest)
- reverse = false;
- else if (f1->dest == b2->dest && b1->dest == f2->dest)
- reverse = true;
- else
+ p1 = PATTERN (i1);
+ p2 = PATTERN (i2);
+
+ if (GET_CODE (p1) != GET_CODE (p2))
return false;
- set1 = pc_set (BB_END (bb1));
- set2 = pc_set (BB_END (bb2));
- if ((XEXP (SET_SRC (set1), 1) == pc_rtx)
- != (XEXP (SET_SRC (set2), 1) == pc_rtx))
- reverse = !reverse;
-
- src1 = SET_SRC (set1);
- src2 = SET_SRC (set2);
- cond1 = XEXP (src1, 0);
- cond2 = XEXP (src2, 0);
- code1 = GET_CODE (cond1);
- if (reverse)
- code2 = reversed_comparison_code (cond2, BB_END (bb2));
- else
- code2 = GET_CODE (cond2);
+ /* If this is a CALL_INSN, compare register usage information.
+ If we don't check this on stack register machines, the two
+ CALL_INSNs might be merged leaving reg-stack.c with mismatching
+ numbers of stack registers in the same basic block.
+ If we don't check this on machines with delay slots, a delay slot may
+ be filled that clobbers a parameter expected by the subroutine.
- if (code2 == UNKNOWN)
+ ??? We take the simple route for now and assume that if they're
+ equal, they were constructed identically. */
+
+ if (CALL_P (i1)
+ && (!rtx_equal_p (CALL_INSN_FUNCTION_USAGE (i1),
+ CALL_INSN_FUNCTION_USAGE (i2))
+ || SIBLING_CALL_P (i1) != SIBLING_CALL_P (i2)))
return false;
- if (call_init && !struct_equiv_init (STRUCT_EQUIV_START | info->mode, info))
- gcc_unreachable ();
- /* Make the sources of the pc sets unreadable so that when we call
- insns_match_p it won't process them.
- The death_notes_match_p from insns_match_p won't see the local registers
- used for the pc set, but that could only cause missed optimizations when
- there are actually condjumps that use stack registers. */
- SET_SRC (set1) = pc_rtx;
- SET_SRC (set2) = pc_rtx;
- /* Verify codes and operands match. */
- if (code1 == code2)
+#ifdef STACK_REGS
+ /* If cross_jump_death_matters is not 0, the insn's mode
+ indicates whether or not the insn contains any stack-like
+ regs. */
+
+ if ((mode & CLEANUP_POST_REGSTACK) && stack_regs_mentioned (i1))
{
- match = (insns_match_p (BB_END (bb1), BB_END (bb2), info)
- && rtx_equiv_p (&XEXP (cond1, 0), XEXP (cond2, 0), 1, info)
- && rtx_equiv_p (&XEXP (cond1, 1), XEXP (cond2, 1), 1, info));
+ /* If register stack conversion has already been done, then
+ death notes must also be compared before it is certain that
+ the two instruction streams match. */
+
+ rtx note;
+ HARD_REG_SET i1_regset, i2_regset;
+
+ CLEAR_HARD_REG_SET (i1_regset);
+ CLEAR_HARD_REG_SET (i2_regset);
+ for (note = REG_NOTES (i1); note; note = XEXP (note, 1))
+ if (REG_NOTE_KIND (note) == REG_DEAD && STACK_REG_P (XEXP (note, 0)))
+ SET_HARD_REG_BIT (i1_regset, REGNO (XEXP (note, 0)));
+
+ for (note = REG_NOTES (i2); note; note = XEXP (note, 1))
+ if (REG_NOTE_KIND (note) == REG_DEAD && STACK_REG_P (XEXP (note, 0)))
+ SET_HARD_REG_BIT (i2_regset, REGNO (XEXP (note, 0)));
+
+ if (!hard_reg_set_equal_p (i1_regset, i2_regset))
+ return false;
}
- else if (code1 == swap_condition (code2))
+#endif
+
+ if (reload_completed
+ ? rtx_renumbered_equal_p (p1, p2) : rtx_equal_p (p1, p2))
+ return true;
+
+ /* Do not do EQUIV substitution after reload. First, we're undoing the
+ work of reload_cse. Second, we may be undoing the work of the post-
+ reload splitting pass. */
+ /* ??? Possibly add a new phase switch variable that can be used by
+ targets to disallow the troublesome insns after splitting. */
+ if (!reload_completed)
+ {
+ /* The following code helps take care of G++ cleanups. */
+ rtx equiv1 = find_reg_equal_equiv_note (i1);
+ rtx equiv2 = find_reg_equal_equiv_note (i2);
+
+ if (equiv1 && equiv2
+ /* If the equivalences are not to a constant, they may
+ reference pseudos that no longer exist, so we can't
+ use them. */
+ && (! reload_completed
+ || (CONSTANT_P (XEXP (equiv1, 0))
+ && rtx_equal_p (XEXP (equiv1, 0), XEXP (equiv2, 0)))))
+ {
+ rtx s1 = single_set (i1);
+ rtx s2 = single_set (i2);
+ if (s1 != 0 && s2 != 0
+ && rtx_renumbered_equal_p (SET_DEST (s1), SET_DEST (s2)))
+ {
+ validate_change (i1, &SET_SRC (s1), XEXP (equiv1, 0), 1);
+ validate_change (i2, &SET_SRC (s2), XEXP (equiv2, 0), 1);
+ if (! rtx_renumbered_equal_p (p1, p2))
+ cancel_changes (0);
+ else if (apply_change_group ())
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+\f
+/* Look through the insns at the end of BB1 and BB2 and find the longest
+ sequence that are equivalent. Store the first insns for that sequence
+ in *F1 and *F2 and return the sequence length.
+
+ To simplify callers of this function, if the blocks match exactly,
+ store the head of the blocks in *F1 and *F2. */
+
+static int
+flow_find_cross_jump (int mode ATTRIBUTE_UNUSED, basic_block bb1,
+ basic_block bb2, rtx *f1, rtx *f2)
+{
+ rtx i1, i2, last1, last2, afterlast1, afterlast2;
+ int ninsns = 0;
+
+ /* Skip simple jumps at the end of the blocks. Complex jumps still
+ need to be compared for equivalence, which we'll do below. */
+
+ i1 = BB_END (bb1);
+ last1 = afterlast1 = last2 = afterlast2 = NULL_RTX;
+ if (onlyjump_p (i1)
+ || (returnjump_p (i1) && !side_effects_p (PATTERN (i1))))
{
- match = (insns_match_p (BB_END (bb1), BB_END (bb2), info)
- && rtx_equiv_p (&XEXP (cond1, 1), XEXP (cond2, 0), 1, info)
- && rtx_equiv_p (&XEXP (cond1, 0), XEXP (cond2, 1), 1, info));
+ last1 = i1;
+ i1 = PREV_INSN (i1);
+ }
+ i2 = BB_END (bb2);
+ if (onlyjump_p (i2)
+ || (returnjump_p (i2) && !side_effects_p (PATTERN (i2))))
+ {
+ last2 = i2;
+ /* Count everything except for unconditional jump as insn. */
+ if (!simplejump_p (i2) && !returnjump_p (i2) && last1)
+ ninsns++;
+ i2 = PREV_INSN (i2);
}
- else
- match = false;
- SET_SRC (set1) = src1;
- SET_SRC (set2) = src2;
- match &= verify_changes (0);
-
- /* If we return true, we will join the blocks. Which means that
- we will only have one branch prediction bit to work with. Thus
- we require the existing branches to have probabilities that are
- roughly similar. */
- if (match
- && !optimize_size
- && maybe_hot_bb_p (bb1)
- && maybe_hot_bb_p (bb2))
+
+ while (true)
{
- int prob2;
+ /* Ignore notes. */
+ while (!INSN_P (i1) && i1 != BB_HEAD (bb1))
+ i1 = PREV_INSN (i1);
- if (b1->dest == b2->dest)
- prob2 = b2->probability;
- else
- /* Do not use f2 probability as f2 may be forwarded. */
- prob2 = REG_BR_PROB_BASE - b2->probability;
+ while (!INSN_P (i2) && i2 != BB_HEAD (bb2))
+ i2 = PREV_INSN (i2);
- /* Fail if the difference in probabilities is greater than 50%.
- This rules out two well-predicted branches with opposite
- outcomes. */
- if (abs (b1->probability - prob2) > REG_BR_PROB_BASE / 2)
+ if (i1 == BB_HEAD (bb1) || i2 == BB_HEAD (bb2))
+ break;
+
+ if (!old_insns_match_p (mode, i1, i2))
+ break;
+
+ merge_memattrs (i1, i2);
+
+ /* Don't begin a cross-jump with a NOTE insn. */
+ if (INSN_P (i1))
{
- if (dump_file)
- fprintf (dump_file,
- "Outcomes of branch in bb %i and %i differ too much (%i %i)\n",
- bb1->index, bb2->index, b1->probability, prob2);
+ /* If the merged insns have different REG_EQUAL notes, then
+ remove them. */
+ rtx equiv1 = find_reg_equal_equiv_note (i1);
+ rtx equiv2 = find_reg_equal_equiv_note (i2);
+
+ if (equiv1 && !equiv2)
+ remove_note (i1, equiv1);
+ else if (!equiv1 && equiv2)
+ remove_note (i2, equiv2);
+ else if (equiv1 && equiv2
+ && !rtx_equal_p (XEXP (equiv1, 0), XEXP (equiv2, 0)))
+ {
+ remove_note (i1, equiv1);
+ remove_note (i2, equiv2);
+ }
- match = false;
+ afterlast1 = last1, afterlast2 = last2;
+ last1 = i1, last2 = i2;
+ ninsns++;
}
+
+ i1 = PREV_INSN (i1);
+ i2 = PREV_INSN (i2);
}
- if (dump_file && match)
- fprintf (dump_file, "Conditionals in bb %i and %i match.\n",
- bb1->index, bb2->index);
+#ifdef HAVE_cc0
+ /* Don't allow the insn after a compare to be shared by
+ cross-jumping unless the compare is also shared. */
+ if (ninsns && reg_mentioned_p (cc0_rtx, last1) && ! sets_cc0_p (last1))
+ last1 = afterlast1, last2 = afterlast2, ninsns--;
+#endif
+
+ /* Include preceding notes and labels in the cross-jump. One,
+ this may bring us to the head of the blocks as requested above.
+ Two, it keeps line number notes as matched as may be. */
+ if (ninsns)
+ {
+ while (last1 != BB_HEAD (bb1) && !INSN_P (PREV_INSN (last1)))
+ last1 = PREV_INSN (last1);
+
+ if (last1 != BB_HEAD (bb1) && LABEL_P (PREV_INSN (last1)))
+ last1 = PREV_INSN (last1);
+
+ while (last2 != BB_HEAD (bb2) && !INSN_P (PREV_INSN (last2)))
+ last2 = PREV_INSN (last2);
- if (!match)
- cancel_changes (0);
- return match;
+ if (last2 != BB_HEAD (bb2) && LABEL_P (PREV_INSN (last2)))
+ last2 = PREV_INSN (last2);
+
+ *f1 = last1;
+ *f2 = last2;
+ }
+
+ return ninsns;
}
-/* Return true iff outgoing edges of INFO->y_block and INFO->x_block match,
- together with the branch instruction. This means that if we commonize the
- control flow before end of the basic block, the semantic remains unchanged.
- If we need to compare jumps, we set STRUCT_EQUIV_MATCH_JUMPS in *MODE,
- and pass *MODE to struct_equiv_init or assign it to INFO->mode, as
- appropriate.
+/* Return true iff outgoing edges of BB1 and BB2 match, together with
+ the branch instruction. This means that if we commonize the control
+ flow before end of the basic block, the semantic remains unchanged.
We may assume that there exists one edge with a common destination. */
static bool
-outgoing_edges_match (int *mode, struct equiv_info *info)
+outgoing_edges_match (int mode, basic_block bb1, basic_block bb2)
{
- basic_block bb1 = info->y_block;
- basic_block bb2 = info->x_block;
int nehedges1 = 0, nehedges2 = 0;
edge fallthru1 = 0, fallthru2 = 0;
edge e1, e2;
& (EDGE_COMPLEX | EDGE_FAKE)) == 0
&& (!JUMP_P (BB_END (bb2)) || simplejump_p (BB_END (bb2))));
- *mode |= STRUCT_EQUIV_MATCH_JUMPS;
/* Match conditional jumps - this may get tricky when fallthru and branch
edges are crossed. */
if (EDGE_COUNT (bb1->succs) == 2
&& any_condjump_p (BB_END (bb1))
&& onlyjump_p (BB_END (bb1)))
{
+ edge b1, f1, b2, f2;
+ bool reverse, match;
+ rtx set1, set2, cond1, cond2;
+ enum rtx_code code1, code2;
+
if (EDGE_COUNT (bb2->succs) != 2
|| !any_condjump_p (BB_END (bb2))
|| !onlyjump_p (BB_END (bb2)))
return false;
- info->mode = *mode;
- return condjump_equiv_p (info, true);
+
+ b1 = BRANCH_EDGE (bb1);
+ b2 = BRANCH_EDGE (bb2);
+ f1 = FALLTHRU_EDGE (bb1);
+ f2 = FALLTHRU_EDGE (bb2);
+
+ /* Get around possible forwarders on fallthru edges. Other cases
+ should be optimized out already. */
+ if (FORWARDER_BLOCK_P (f1->dest))
+ f1 = single_succ_edge (f1->dest);
+
+ if (FORWARDER_BLOCK_P (f2->dest))
+ f2 = single_succ_edge (f2->dest);
+
+ /* To simplify use of this function, return false if there are
+ unneeded forwarder blocks. These will get eliminated later
+ during cleanup_cfg. */
+ if (FORWARDER_BLOCK_P (f1->dest)
+ || FORWARDER_BLOCK_P (f2->dest)
+ || FORWARDER_BLOCK_P (b1->dest)
+ || FORWARDER_BLOCK_P (b2->dest))
+ return false;
+
+ if (f1->dest == f2->dest && b1->dest == b2->dest)
+ reverse = false;
+ else if (f1->dest == b2->dest && b1->dest == f2->dest)
+ reverse = true;
+ else
+ return false;
+
+ set1 = pc_set (BB_END (bb1));
+ set2 = pc_set (BB_END (bb2));
+ if ((XEXP (SET_SRC (set1), 1) == pc_rtx)
+ != (XEXP (SET_SRC (set2), 1) == pc_rtx))
+ reverse = !reverse;
+
+ cond1 = XEXP (SET_SRC (set1), 0);
+ cond2 = XEXP (SET_SRC (set2), 0);
+ code1 = GET_CODE (cond1);
+ if (reverse)
+ code2 = reversed_comparison_code (cond2, BB_END (bb2));
+ else
+ code2 = GET_CODE (cond2);
+
+ if (code2 == UNKNOWN)
+ return false;
+
+ /* Verify codes and operands match. */
+ match = ((code1 == code2
+ && rtx_renumbered_equal_p (XEXP (cond1, 0), XEXP (cond2, 0))
+ && rtx_renumbered_equal_p (XEXP (cond1, 1), XEXP (cond2, 1)))
+ || (code1 == swap_condition (code2)
+ && rtx_renumbered_equal_p (XEXP (cond1, 1),
+ XEXP (cond2, 0))
+ && rtx_renumbered_equal_p (XEXP (cond1, 0),
+ XEXP (cond2, 1))));
+
+ /* If we return true, we will join the blocks. Which means that
+ we will only have one branch prediction bit to work with. Thus
+ we require the existing branches to have probabilities that are
+ roughly similar. */
+ if (match
+ && !optimize_size
+ && maybe_hot_bb_p (bb1)
+ && maybe_hot_bb_p (bb2))
+ {
+ int prob2;
+
+ if (b1->dest == b2->dest)
+ prob2 = b2->probability;
+ else
+ /* Do not use f2 probability as f2 may be forwarded. */
+ prob2 = REG_BR_PROB_BASE - b2->probability;
+
+ /* Fail if the difference in probabilities is greater than 50%.
+ This rules out two well-predicted branches with opposite
+ outcomes. */
+ if (abs (b1->probability - prob2) > REG_BR_PROB_BASE / 2)
+ {
+ if (dump_file)
+ fprintf (dump_file,
+ "Outcomes of branch in bb %i and %i differ too much (%i %i)\n",
+ bb1->index, bb2->index, b1->probability, prob2);
+
+ return false;
+ }
+ }
+
+ if (dump_file && match)
+ fprintf (dump_file, "Conditionals in bb %i and %i match.\n",
+ bb1->index, bb2->index);
+
+ return match;
}
/* Generic case - we are seeing a computed jump, table jump or trapping
identical = false;
}
- if (identical
- && struct_equiv_init (STRUCT_EQUIV_START | *mode, info))
+ if (identical)
{
+ replace_label_data rr;
bool match;
- /* Indicate that LABEL1 is to be replaced with LABEL2
+ /* Temporarily replace references to LABEL1 with LABEL2
in BB1->END so that we could compare the instructions. */
- info->y_label = label1;
- info->x_label = label2;
+ rr.r1 = label1;
+ rr.r2 = label2;
+ rr.update_label_nuses = false;
+ for_each_rtx (&BB_END (bb1), replace_label, &rr);
- match = insns_match_p (BB_END (bb1), BB_END (bb2), info);
+ match = old_insns_match_p (mode, BB_END (bb1), BB_END (bb2));
if (dump_file && match)
fprintf (dump_file,
"Tablejumps in bb %i and %i match.\n",
bb1->index, bb2->index);
+ /* Set the original label in BB1->END because when deleting
+ a block whose end is a tablejump, the tablejump referenced
+ from the instruction is deleted too. */
+ rr.r1 = label2;
+ rr.r2 = label1;
+ for_each_rtx (&BB_END (bb1), replace_label, &rr);
+
return match;
}
}
/* First ensure that the instructions match. There may be many outgoing
edges so this test is generally cheaper. */
- if (!struct_equiv_init (STRUCT_EQUIV_START | *mode, info)
- || !insns_match_p (BB_END (bb1), BB_END (bb2), info))
+ if (!old_insns_match_p (mode, BB_END (bb1), BB_END (bb2)))
return false;
/* Search the outgoing edges, ensure that the counts do match, find possible
FOR_EACH_EDGE (e1, ei, bb1->succs)
{
e2 = EDGE_SUCC (bb2, ei.index);
-
+
if (e1->flags & EDGE_EH)
nehedges1++;
return false;
}
- /* We don't need to match the rest of edges as above checks should be enough
- to ensure that they are equivalent. */
+ /* The same checks as in try_crossjump_to_edge. It is required for RTL
+ version of sequence abstraction. */
+ FOR_EACH_EDGE (e1, ei, bb2->succs)
+ {
+ edge e2;
+ edge_iterator ei;
+ basic_block d1 = e1->dest;
+
+ if (FORWARDER_BLOCK_P (d1))
+ d1 = EDGE_SUCC (d1, 0)->dest;
+
+ FOR_EACH_EDGE (e2, ei, bb1->succs)
+ {
+ basic_block d2 = e2->dest;
+ if (FORWARDER_BLOCK_P (d2))
+ d2 = EDGE_SUCC (d2, 0)->dest;
+ if (d1 == d2)
+ break;
+ }
+
+ if (!e2)
+ return false;
+ }
+
return true;
}
+/* Returns true if BB basic block has a preserve label. */
+
+static bool
+block_has_preserve_label (basic_block bb)
+{
+ return (bb
+ && block_label (bb)
+ && LABEL_PRESERVE_P (block_label (bb)));
+}
+
/* E1 and E2 are edges with the same destination block. Search their
predecessors for common code. If found, redirect control flow from
(maybe the middle of) E1->SRC to (maybe the middle of) E2->SRC. */
static bool
try_crossjump_to_edge (int mode, edge e1, edge e2)
{
- int nmatch, i;
+ int nmatch;
basic_block src1 = e1->src, src2 = e2->src;
basic_block redirect_to, redirect_from, to_remove;
+ rtx newpos1, newpos2;
edge s;
edge_iterator ei;
- struct equiv_info info;
- rtx x_active, y_active;
+
+ newpos1 = newpos2 = NULL_RTX;
/* If we have partitioned hot/cold basic blocks, it is a bad idea
to try this optimization.
partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
- if (flag_reorder_blocks_and_partition && no_new_pseudos)
+ if (flag_reorder_blocks_and_partition && reload_completed)
return false;
/* Search backward through forwarder blocks. We don't need to worry
return false;
/* Look for the common insn sequence, part the first ... */
- info.x_block = src2;
- info.y_block = src1;
- if (!outgoing_edges_match (&mode, &info))
+ if (!outgoing_edges_match (mode, src1, src2))
return false;
/* ... and part the second. */
- info.input_cost = optimize_size ? COSTS_N_INSNS (1) : -1;
- nmatch = struct_equiv_block_eq (STRUCT_EQUIV_START | mode, &info);
+ nmatch = flow_find_cross_jump (mode, src1, src2, &newpos1, &newpos2);
/* Don't proceed with the crossjump unless we found a sufficient number
of matching instructions or the 'from' block was totally matched
(such that its predecessors will hopefully be redirected and the
block removed). */
- if (!nmatch)
- return false;
- if ((nmatch -info.cur.input_count < PARAM_VALUE (PARAM_MIN_CROSSJUMP_INSNS))
- && (info.cur.y_start != BB_HEAD (src1)))
- return false;
- while (info.need_rerun)
- {
- nmatch = struct_equiv_block_eq (STRUCT_EQUIV_RERUN | mode, &info);
- if (!nmatch)
- return false;
- if ((nmatch -info.cur.input_count < PARAM_VALUE (PARAM_MIN_CROSSJUMP_INSNS))
- && (info.cur.y_start != BB_HEAD (src1)))
- return false;
- }
- nmatch = struct_equiv_block_eq (STRUCT_EQUIV_FINAL | mode, &info);
- if ((nmatch -info.cur.input_count < PARAM_VALUE (PARAM_MIN_CROSSJUMP_INSNS))
- && (info.cur.y_start != BB_HEAD (src1)))
+ if ((nmatch < PARAM_VALUE (PARAM_MIN_CROSSJUMP_INSNS))
+ && (newpos1 != BB_HEAD (src1)))
return false;
- /* Skip possible basic block header. */
- x_active = info.cur.x_start;
- if (LABEL_P (x_active))
- x_active = NEXT_INSN (x_active);
- if (NOTE_P (x_active))
- x_active = NEXT_INSN (x_active);
-
- y_active = info.cur.y_start;
- if (LABEL_P (y_active))
- y_active = NEXT_INSN (y_active);
- if (NOTE_P (y_active))
- y_active = NEXT_INSN (y_active);
-
- /* In order for this code to become active, either we have to be called
- before reload, or struct_equiv_block_eq needs to add register scavenging
- code to allocate input_reg after reload. */
- if (info.input_reg)
- {
- emit_insn_before (gen_move_insn (info.input_reg, info.x_input),
- x_active);
- emit_insn_before (gen_move_insn (info.input_reg, info.y_input),
- y_active);
- }
-
- for (i = 0; i < info.cur.local_count; i++)
- if (info.local_rvalue[i])
- emit_insn_before (gen_move_insn (info.x_local[i], info.y_local[i]),
- y_active);
+ /* Avoid deleting preserve label when redirecting ABNORMAL edges. */
+ if (block_has_preserve_label (e1->dest)
+ && (e1->flags & EDGE_ABNORMAL))
+ return false;
/* Here we know that the insns in the end of SRC1 which are common with SRC2
will be deleted.
/* Avoid splitting if possible. We must always split when SRC2 has
EH predecessor edges, or we may end up with basic blocks with both
normal and EH predecessor edges. */
- if (info.cur.x_start == BB_HEAD (src2)
+ if (newpos2 == BB_HEAD (src2)
&& !(EDGE_PRED (src2, 0)->flags & EDGE_EH))
redirect_to = src2;
else
{
- if (info.cur.x_start == BB_HEAD (src2))
+ if (newpos2 == BB_HEAD (src2))
{
/* Skip possible basic block header. */
- if (LABEL_P (info.cur.x_start))
- info.cur.x_start = NEXT_INSN (info.cur.x_start);
- if (NOTE_P (info.cur.x_start))
- info.cur.x_start = NEXT_INSN (info.cur.x_start);
+ if (LABEL_P (newpos2))
+ newpos2 = NEXT_INSN (newpos2);
+ if (NOTE_P (newpos2))
+ newpos2 = NEXT_INSN (newpos2);
}
if (dump_file)
fprintf (dump_file, "Splitting bb %i before %i insns\n",
src2->index, nmatch);
- redirect_to = split_block (src2, PREV_INSN (info.cur.x_start))->dest;
- COPY_REG_SET (info.y_block->il.rtl->global_live_at_end,
- info.x_block->il.rtl->global_live_at_end);
+ redirect_to = split_block (src2, PREV_INSN (newpos2))->dest;
}
if (dump_file)
- {
- fprintf (dump_file, "Cross jumping from bb %i to bb %i; %i common insns",
- src1->index, src2->index, nmatch);
- if (info.cur.local_count)
- fprintf (dump_file, ", %i local registers", info.cur.local_count);
- fprintf (dump_file, "\n");
- }
+ fprintf (dump_file,
+ "Cross jumping from bb %i to bb %i; %i common insns\n",
+ src1->index, src2->index, nmatch);
- redirect_to->count += src1->count;
- redirect_to->frequency += src1->frequency;
- /* We may have some registers visible trought the block. */
- redirect_to->flags |= BB_DIRTY;
+ /* We may have some registers visible through the block. */
+ df_set_bb_dirty (redirect_to);
/* Recompute the frequencies and counts of outgoing edges. */
FOR_EACH_EDGE (s, ei, redirect_to->succs)
s->count += s2->count;
/* Take care to update possible forwarder blocks. We verified
- that there is no more than one in the chain, so we can't run
- into infinite loop. */
+ that there is no more than one in the chain, so we can't run
+ into infinite loop. */
if (FORWARDER_BLOCK_P (s->dest))
{
single_succ_edge (s->dest)->count += s2->count;
/ (redirect_to->frequency + src1->frequency));
}
+ /* Adjust count and frequency for the block. An earlier jump
+ threading pass may have left the profile in an inconsistent
+ state (see update_bb_profile_for_threading) so we must be
+ prepared for overflows. */
+ redirect_to->count += src1->count;
+ redirect_to->frequency += src1->frequency;
+ if (redirect_to->frequency > BB_FREQ_MAX)
+ redirect_to->frequency = BB_FREQ_MAX;
update_br_prob_note (redirect_to);
/* Edit SRC1 to go to REDIRECT_TO at NEWPOS1. */
- redirect_from = split_block (src1, PREV_INSN (y_active))->src;
+ /* Skip possible basic block header. */
+ if (LABEL_P (newpos1))
+ newpos1 = NEXT_INSN (newpos1);
+
+ if (NOTE_P (newpos1))
+ newpos1 = NEXT_INSN (newpos1);
+
+ redirect_from = split_block (src1, PREV_INSN (newpos1))->src;
to_remove = single_succ (redirect_from);
redirect_edge_and_branch_force (single_succ_edge (redirect_from), redirect_to);
/* If we are partitioning hot/cold basic blocks, we don't want to
mess up unconditional or indirect jumps that cross between hot
- and cold sections.
-
+ and cold sections.
+
Basic block partitioning may result in some jumps that appear to
- be optimizable (or blocks that appear to be mergeable), but which really
- must be left untouched (they are required to make it safely across
- partition boundaries). See the comments at the top of
+ be optimizable (or blocks that appear to be mergeable), but which really
+ must be left untouched (they are required to make it safely across
+ partition boundaries). See the comments at the top of
bb-reorder.c:partition_hot_cold_basic_blocks for complete details. */
- if (BB_PARTITION (EDGE_PRED (bb, 0)->src) !=
- BB_PARTITION (EDGE_PRED (bb, 1)->src)
+ if (BB_PARTITION (EDGE_PRED (bb, 0)->src) !=
+ BB_PARTITION (EDGE_PRED (bb, 1)->src)
|| (EDGE_PRED (bb, 0)->flags & EDGE_CROSSING))
return false;
FOR_EACH_EDGE (e, ei, bb->preds)
{
if (e->flags & EDGE_FALLTHRU)
- fallthru = e;
+ {
+ fallthru = e;
+ break;
+ }
}
changed = false;
e = EDGE_PRED (ev, ix);
ix++;
- /* As noted above, first try with the fallthru predecessor. */
+ /* As noted above, first try with the fallthru predecessor (or, a
+ fallthru predecessor if we are in cfglayout mode). */
if (fallthru)
{
/* Don't combine the fallthru edge into anything else.
/* If nothing changed since the last attempt, there is nothing
we can do. */
if (!first_pass
- && (!(e->src->flags & BB_DIRTY)
- && !(fallthru->src->flags & BB_DIRTY)))
+ && (!(df_get_bb_dirty (e->src))
+ && !(df_get_bb_dirty (fallthru->src))))
continue;
if (try_crossjump_to_edge (mode, e, fallthru))
/* If nothing changed since the last attempt, there is nothing
we can do. */
if (!first_pass
- && (!(e->src->flags & BB_DIRTY)
- && !(e2->src->flags & BB_DIRTY)))
+ && (!(df_get_bb_dirty (e->src))
+ && !(df_get_bb_dirty (e2->src))))
continue;
if (try_crossjump_to_edge (mode, e, e2))
}
}
+ if (changed)
+ crossjumps_occured = true;
+
return changed;
}
int iterations = 0;
basic_block bb, b, next;
- if (mode & CLEANUP_CROSSJUMP)
- add_noreturn_fake_exit_edges ();
-
- if (mode & (CLEANUP_UPDATE_LIFE | CLEANUP_CROSSJUMP | CLEANUP_THREADING))
+ if (mode & (CLEANUP_CROSSJUMP | CLEANUP_THREADING))
clear_bb_flags ();
+ crossjumps_occured = false;
+
FOR_EACH_BB (bb)
update_forwarder_flag (bb);
bool changed_here = false;
/* Delete trivially dead basic blocks. */
- while (EDGE_COUNT (b->preds) == 0)
+ if (EDGE_COUNT (b->preds) == 0)
{
c = b->prev_bb;
if (dump_file)
delete_basic_block (b);
if (!(mode & CLEANUP_CFGLAYOUT))
changed = true;
- b = c;
+ /* Avoid trying to remove ENTRY_BLOCK_PTR. */
+ b = (c == ENTRY_BLOCK_PTR ? c->next_bb : c);
+ continue;
}
/* Remove code labels no longer used. */
{
rtx label = BB_HEAD (b);
- delete_insn_chain (label, label);
- /* In the case label is undeletable, move it after the
+ delete_insn_chain (label, label, false);
+ /* If the case label is undeletable, move it after the
BASIC_BLOCK note. */
- if (NOTE_LINE_NUMBER (BB_HEAD (b)) == NOTE_INSN_DELETED_LABEL)
+ if (NOTE_KIND (BB_HEAD (b)) == NOTE_INSN_DELETED_LABEL)
{
rtx bb_note = NEXT_INSN (BB_HEAD (b));
reorder_insns_nobb (label, label, bb_note);
BB_HEAD (b) = bb_note;
+ if (BB_END (b) == bb_note)
+ BB_END (b) = label;
}
if (dump_file)
fprintf (dump_file, "Deleted label in block %i.\n",
does not fit merge_blocks interface and is kept here in
hope that it will become useless once more of compiler
is transformed to use cfg_layout mode. */
-
+
if ((mode & CLEANUP_CFGLAYOUT)
&& can_merge_blocks_p (b, c))
{
while (changed);
}
- if (mode & CLEANUP_CROSSJUMP)
- remove_fake_exit_edges ();
-
FOR_ALL_BB (b)
b->flags &= ~(BB_FORWARDER_BLOCK | BB_NONTHREADABLE_BLOCK);
return changed;
}
-/* Merges sequential blocks if possible. */
-
-bool
-merge_seq_blocks (void)
+/* Delete any jump tables never referenced. We can't delete them at the
+ time of removing tablejump insn as they are referenced by the preceding
+ insns computing the destination, so we delay deleting and garbagecollect
+ them once life information is computed. */
+void
+delete_dead_jumptables (void)
{
basic_block bb;
- bool changed = false;
- for (bb = ENTRY_BLOCK_PTR->next_bb; bb != EXIT_BLOCK_PTR; )
+ /* A dead jump table does not belong to any basic block. Scan insns
+ between two adjacent basic blocks. */
+ FOR_EACH_BB (bb)
{
- if (single_succ_p (bb)
- && can_merge_blocks_p (bb, single_succ (bb)))
+ rtx insn, next;
+
+ for (insn = NEXT_INSN (BB_END (bb));
+ insn && !NOTE_INSN_BASIC_BLOCK_P (insn);
+ insn = next)
{
- /* Merge the blocks and retry. */
- merge_blocks (bb, single_succ (bb));
- changed = true;
- continue;
- }
+ next = NEXT_INSN (insn);
+ if (LABEL_P (insn)
+ && LABEL_NUSES (insn) == LABEL_PRESERVE_P (insn)
+ && JUMP_P (next)
+ && (GET_CODE (PATTERN (next)) == ADDR_VEC
+ || GET_CODE (PATTERN (next)) == ADDR_DIFF_VEC))
+ {
+ rtx label = insn, jump = next;
- bb = bb->next_bb;
- }
+ if (dump_file)
+ fprintf (dump_file, "Dead jumptable %i removed\n",
+ INSN_UID (insn));
- return changed;
+ next = NEXT_INSN (next);
+ delete_insn (jump);
+ delete_insn (label);
+ }
+ }
+ }
}
+
\f
/* Tidy the CFG by deleting unreachable code and whatnot. */
{
bool changed = false;
+ /* Set the cfglayout mode flag here. We could update all the callers
+ but that is just inconvenient, especially given that we eventually
+ want to have cfglayout mode as the default. */
+ if (current_ir_type () == IR_RTL_CFGLAYOUT)
+ mode |= CLEANUP_CFGLAYOUT;
+
timevar_push (TV_CLEANUP_CFG);
if (delete_unreachable_blocks ())
{
changed = true;
/* We've possibly created trivially dead code. Cleanup it right
now to introduce more opportunities for try_optimize_cfg. */
- if (!(mode & (CLEANUP_NO_INSN_DEL | CLEANUP_UPDATE_LIFE))
+ if (!(mode & (CLEANUP_NO_INSN_DEL))
&& !reload_completed)
- delete_trivially_dead_insns (get_insns(), max_reg_num ());
+ delete_trivially_dead_insns (get_insns (), max_reg_num ());
}
compact_blocks ();
+ /* To tail-merge blocks ending in the same noreturn function (e.g.
+ a call to abort) we have to insert fake edges to exit. Do this
+ here once. The fake edges do not interfere with any other CFG
+ cleanups. */
+ if (mode & CLEANUP_CROSSJUMP)
+ add_noreturn_fake_exit_edges ();
+
+ if (!dbg_cnt (cfg_cleanup))
+ return changed;
+
while (try_optimize_cfg (mode))
{
delete_unreachable_blocks (), changed = true;
- if (mode & CLEANUP_UPDATE_LIFE)
- {
- /* Cleaning up CFG introduces more opportunities for dead code
- removal that in turn may introduce more opportunities for
- cleaning up the CFG. */
- if (!update_life_info_in_dirty_blocks (UPDATE_LIFE_GLOBAL_RM_NOTES,
- PROP_DEATH_NOTES
- | PROP_SCAN_DEAD_CODE
- | PROP_KILL_DEAD_CODE
- | ((mode & CLEANUP_LOG_LINKS)
- ? PROP_LOG_LINKS : 0)))
- break;
- }
- else if (!(mode & CLEANUP_NO_INSN_DEL)
- && (mode & CLEANUP_EXPENSIVE)
- && !reload_completed)
+ if (!(mode & CLEANUP_NO_INSN_DEL))
{
- if (!delete_trivially_dead_insns (get_insns(), max_reg_num ()))
+ /* Try to remove some trivially dead insns when doing an expensive
+ cleanup. But delete_trivially_dead_insns doesn't work after
+ reload (it only handles pseudos) and run_fast_dce is too costly
+ to run in every iteration.
+
+ For effective cross jumping, we really want to run a fast DCE to
+ clean up any dead conditions, or they get in the way of performing
+ useful tail merges.
+
+ Other transformations in cleanup_cfg are not so sensitive to dead
+ code, so delete_trivially_dead_insns or even doing nothing at all
+ is good enough. */
+ if ((mode & CLEANUP_EXPENSIVE) && !reload_completed
+ && !delete_trivially_dead_insns (get_insns (), max_reg_num ()))
break;
+ else if ((mode & CLEANUP_CROSSJUMP)
+ && crossjumps_occured)
+ run_fast_dce ();
}
else
break;
- delete_dead_jumptables ();
}
+ if (mode & CLEANUP_CROSSJUMP)
+ remove_fake_exit_edges ();
+
+ /* Don't call delete_dead_jumptables in cfglayout mode, because
+ that function assumes that jump tables are in the insns stream.
+ But we also don't _have_ to delete dead jumptables in cfglayout
+ mode because we shouldn't even be looking at things that are
+ not in a basic block. Dead jumptables are cleaned up when
+ going out of cfglayout mode. */
+ if (!(mode & CLEANUP_CFGLAYOUT))
+ delete_dead_jumptables ();
+
timevar_pop (TV_CLEANUP_CFG);
return changed;
}
\f
-static void
+static unsigned int
rest_of_handle_jump (void)
{
delete_unreachable_blocks ();
if (cfun->tail_call_emit)
fixup_tail_calls ();
+ return 0;
}
-struct tree_opt_pass pass_jump =
+struct rtl_opt_pass pass_jump =
{
+ {
+ RTL_PASS,
"sibling", /* name */
- NULL, /* gate */
- rest_of_handle_jump, /* execute */
+ NULL, /* gate */
+ rest_of_handle_jump, /* execute */
NULL, /* sub */
NULL, /* next */
0, /* static_pass_number */
0, /* properties_provided */
0, /* properties_destroyed */
TODO_ggc_collect, /* todo_flags_start */
- TODO_dump_func |
TODO_verify_flow, /* todo_flags_finish */
- 'i' /* letter */
+ }
};
-static void
+static unsigned int
rest_of_handle_jump2 (void)
{
- /* Turn NOTE_INSN_EXPECTED_VALUE into REG_BR_PROB. Do this
- before jump optimization switches branch directions. */
- if (flag_guess_branch_prob)
- expected_value_to_br_prob ();
-
delete_trivially_dead_insns (get_insns (), max_reg_num ());
- reg_scan (get_insns (), max_reg_num ());
if (dump_file)
- dump_flow_info (dump_file);
- cleanup_cfg ((optimize ? CLEANUP_EXPENSIVE : 0) | CLEANUP_PRE_LOOP
- | (flag_thread_jumps ? CLEANUP_THREADING : 0));
-
- create_loop_notes ();
-
- purge_line_number_notes ();
-
- if (optimize)
- cleanup_cfg (CLEANUP_EXPENSIVE | CLEANUP_PRE_LOOP);
-
- /* Jump optimization, and the removal of NULL pointer checks, may
- have reduced the number of instructions substantially. CSE, and
- future passes, allocate arrays whose dimensions involve the
- maximum instruction UID, so if we can reduce the maximum UID
- we'll save big on memory. */
- renumber_insns (dump_file);
+ dump_flow_info (dump_file, dump_flags);
+ cleanup_cfg ((optimize ? CLEANUP_EXPENSIVE : 0)
+ | (flag_thread_jumps ? CLEANUP_THREADING : 0));
+ return 0;
}
-struct tree_opt_pass pass_jump2 =
+struct rtl_opt_pass pass_jump2 =
{
+ {
+ RTL_PASS,
"jump", /* name */
- NULL, /* gate */
- rest_of_handle_jump2, /* execute */
+ NULL, /* gate */
+ rest_of_handle_jump2, /* execute */
NULL, /* sub */
NULL, /* next */
0, /* static_pass_number */
0, /* properties_provided */
0, /* properties_destroyed */
TODO_ggc_collect, /* todo_flags_start */
- TODO_dump_func, /* todo_flags_finish */
- 'j' /* letter */
+ TODO_dump_func | TODO_verify_rtl_sharing,/* todo_flags_finish */
+ }
};
OSDN Git Service
