-- --
-- S p e c --
-- --
--- $Revision: 1.28 $
--- --
--- Copyright (C) 1992-2001 Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2009, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
--- ware Foundation; either version 2, or (at your option) any later ver- --
+-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
--- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
--- for more details. You should have received a copy of the GNU General --
--- Public License distributed with GNAT; see file COPYING. If not, write --
--- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
--- MA 02111-1307, USA. --
+-- or FITNESS FOR A PARTICULAR PURPOSE. --
+-- --
+-- As a special exception under Section 7 of GPL version 3, you are granted --
+-- additional permissions described in the GCC Runtime Library Exception, --
+-- version 3.1, as published by the Free Software Foundation. --
-- --
--- As a special exception, if other files instantiate generics from this --
--- unit, or you link this unit with other files to produce an executable, --
--- this unit does not by itself cause the resulting executable to be --
--- covered by the GNU General Public License. This exception does not --
--- however invalidate any other reasons why the executable file might be --
--- covered by the GNU Public License. --
+-- You should have received a copy of the GNU General Public License and --
+-- a copy of the GCC Runtime Library Exception along with this program; --
+-- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
+-- <http://www.gnu.org/licenses/>. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
--- It is now maintained by Ada Core Technologies Inc (http://www.gnat.com). --
+-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
-- for writing error messages and informational output. It is also used
-- by the debug source file output routines (see Sprintf.Print_Eol).
-with Types; use Types;
+with Hostparm; use Hostparm;
+with Types; use Types;
package Output is
-pragma Elaborate_Body (Output);
-
- -------------------------
- -- Line Buffer Control --
- -------------------------
+ pragma Elaborate_Body;
- -- Note: the following buffer and column position are maintained by
- -- the subprograms defined in this package, and are not normally
- -- directly modified or accessed by a client. However, a client is
- -- permitted to modify these values, using the knowledge that only
- -- Write_Eol actually generates any output.
-
- Buffer_Max : constant := 8192;
- Buffer : String (1 .. Buffer_Max + 1);
- -- Buffer used to build output line. We do line buffering because it
- -- is needed for the support of the debug-generated-code option (-gnatD).
- -- Historically it was first added because on VMS, line buffering is
- -- needed with certain file formats. So in any case line buffering must
- -- be retained for this purpose, even if other reasons disappear. Note
- -- any attempt to write more output to a line than can fit in the buffer
- -- will be silently ignored.
-
- Column : Pos range 1 .. Buffer'Length + 1 := 1;
- -- Column about to be written.
+ type Output_Proc is access procedure (S : String);
+ -- This type is used for the Set_Special_Output procedure. If this
+ -- procedure is called, then instead of lines being written to
+ -- standard error or standard output, a call is made to the given
+ -- procedure for each line, passing the line with an end of line
+ -- character (which is a single ASCII.LF character, even in systems
+ -- which normally use CR/LF or some other sequence for line end).
-----------------
-- Subprograms --
-----------------
+ procedure Set_Special_Output (P : Output_Proc);
+ -- Sets subsequent output to call procedure P. If P is null, then
+ -- the call cancels the effect of a previous call, reverting the
+ -- output to standard error or standard output depending on the
+ -- mode at the time of previous call. Any exception generated by
+ -- by calls to P is simply propagated to the caller of the routine
+ -- causing the write operation.
+
+ procedure Cancel_Special_Output;
+ -- Cancels the effect of a call to Set_Special_Output, if any.
+ -- The output is then directed to standard error or standard output
+ -- depending on the last call to Set_Standard_Error or Set_Standard_Output.
+ -- It is never an error to call Cancel_Special_Output. It has the same
+ -- effect as calling Set_Special_Output (null).
+
+ procedure Ignore_Output (S : String);
+ -- Does nothing. To disable output, pass Ignore_Output'Access to
+ -- Set_Special_Output.
+
procedure Set_Standard_Error;
-- Sets subsequent output to appear on the standard error file (whatever
- -- that might mean for the host operating system, if anything).
+ -- that might mean for the host operating system, if anything) when
+ -- no special output is in effect. When a special output is in effect,
+ -- the output will appear on standard error only after special output
+ -- has been cancelled.
procedure Set_Standard_Output;
-- Sets subsequent output to appear on the standard output file (whatever
- -- that might mean for the host operating system, if anything). This is
- -- the default mode before any call to either of the Set procedures.
+ -- that might mean for the host operating system, if anything) when
+ -- no special output is in effect. When a special output is in effect,
+ -- the output will appear on standard output only after special output
+ -- has been cancelled. Output to standard output is the default mode
+ -- before any call to either of the Set procedures.
+
+ procedure Indent;
+ -- Increases the current indentation level. Whenever a line is written
+ -- (triggered by Eol), an appropriate amount of whitespace is added to the
+ -- beginning of the line, wrapping around if it gets too long.
+
+ procedure Outdent;
+ -- Decreases the current indentation level
procedure Write_Char (C : Character);
- -- Write one character to the standard output file. Note that the
- -- character should not be LF or CR (use Write_Eol for end of line)
+ -- Write one character to the standard output file. If the character is LF,
+ -- this is equivalent to Write_Eol.
+
+ procedure Write_Erase_Char (C : Character);
+ -- If last character in buffer matches C, erase it, otherwise no effect
procedure Write_Eol;
-- Write an end of line (whatever is required by the system in use,
-- e.g. CR/LF for DOS, or LF for Unix) to the standard output file.
-- This routine also empties the line buffer, actually writing it
-- to the file. Note that Write_Eol is the only routine that causes
- -- any actual output to be written.
+ -- any actual output to be written. Trailing spaces are removed.
+
+ procedure Write_Eol_Keep_Blanks;
+ -- Similar as Write_Eol, except that trailing spaces are not removed
procedure Write_Int (Val : Int);
-- Write an integer value with no leading blanks or zeroes. Negative
-- values are preceded by a minus sign).
+ procedure Write_Spaces (N : Nat);
+ -- Write N spaces
+
procedure Write_Str (S : String);
-- Write a string of characters to the standard output file. Note that
- -- end of line is handled separately using WRITE_EOL, so the string
- -- should not contain either of the characters LF or CR, but it may
- -- contain horizontal tab characters.
+ -- end of line is normally handled separately using WRITE_EOL, but it
+ -- is allowed for the string to contain LF (but not CR) characters,
+ -- which are properly interpreted as end of line characters. The string
+ -- may also contain horizontal tab characters.
procedure Write_Line (S : String);
-- Equivalent to Write_Str (S) followed by Write_Eol;
+ function Column return Pos;
+ pragma Inline (Column);
+ -- Returns the number of the column about to be written (e.g. a value
+ -- of 1 means the current line is empty).
+
+ -------------------------
+ -- Buffer Save/Restore --
+ -------------------------
+
+ -- This facility allows the current line buffer to be saved and restored
+
+ type Saved_Output_Buffer is private;
+ -- Type used for Save/Restore_Buffer
+
+ Buffer_Max : constant := Hostparm.Max_Line_Length;
+ -- Maximal size of a buffered output line
+
+ function Save_Output_Buffer return Saved_Output_Buffer;
+ -- Save current line buffer and reset line buffer to empty
+
+ procedure Restore_Output_Buffer (S : Saved_Output_Buffer);
+ -- Restore previously saved output buffer. The value in S is not affected
+ -- so it is legitimate to restore a buffer more than once.
+
--------------------------
-- Debugging Procedures --
--------------------------
-- names, precisely to make sure that they are only used for debugging!
procedure w (C : Character);
- -- Dump quote, character quote, followed by line return
+ -- Dump quote, character, quote, followed by line return
procedure w (S : String);
-- Dump string followed by line return
procedure w (L : String; B : Boolean);
-- Dump contents of string followed by blank, Boolean, line return
+private
+ -- Note: the following buffer and column position are maintained by the
+ -- subprograms defined in this package, and cannot be directly modified or
+ -- accessed by a client.
+
+ Buffer : String (1 .. Buffer_Max + 1) := (others => '*');
+ for Buffer'Alignment use 4;
+ -- Buffer used to build output line. We do line buffering because it
+ -- is needed for the support of the debug-generated-code option (-gnatD).
+ -- Historically it was first added because on VMS, line buffering is
+ -- needed with certain file formats. So in any case line buffering must
+ -- be retained for this purpose, even if other reasons disappear. Note
+ -- any attempt to write more output to a line than can fit in the buffer
+ -- will be silently ignored. The alignment clause improves the efficiency
+ -- of the save/restore procedures.
+
+ Next_Col : Positive range 1 .. Buffer'Length + 1 := 1;
+ -- Column about to be written
+
+ type Saved_Output_Buffer is record
+ Buffer : String (1 .. Buffer_Max + 1);
+ Next_Col : Positive;
+ Cur_Indentation : Natural;
+ end record;
+
end Output;