-f\input texinfo @c -*-texinfo-*-
+\input texinfo @c -*-texinfo-*-
@c %**start of header
@c oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
The Cross-Referencing Tools gnatxref and gnatfind
-* gnatxref Switches::
-* gnatfind Switches::
+* Switches for gnatxref::
+* Switches for gnatfind::
* Project Files for gnatxref and gnatfind::
* Regular Expressions in gnatfind and gnatxref::
* Examples of gnatxref Usage::
* Project-Wide Checks::
* Rule exemption::
* Predefined Rules::
+* Example of gnatcheck Usage::
Sample Bodies Using gnatstub
@item
The switches
-@option{^-gnatz^/DISTRIBUTION_STUBS^}, @option{-gnatzc}, and @option{-gnatzr}
-may not be combined with any other switches.
+^^@option{/DISTRIBUTION_STUBS=},^
+@option{-gnatzc} and @option{-gnatzr} may not be combined with any other
+switches, and only one of them may appear in the command line.
@ifclear vms
@item
Once a ``V'' appears in the string (that is a use of the @option{-gnatV}
switch), then all further characters in the switch are interpreted
as validity checking options (@pxref{Validity Checking}).
+
+@item
+Option ``em'', ``ec'', ``ep'', ``l='' and ``R'' must be the last options in
+a combined list of options.
@end ifclear
@end itemize
This switch disables warnings for a @code{with} of an internal GNAT
implementation unit.
+@item -gnatw.i
+@emph{Activate warnings on overlapping actuals.}
+@cindex @option{-gnatw.i} (@command{gcc})
+This switch enables a warning on statically detectable overlapping actuals in
+a subprogram call, when one of the actuals is an in-out parameter, and the
+types of the actuals are not by-copy types. The warning is off by default,
+and is not included under -gnatwa.
+
+@item -gnatw.I
+@emph{Disable warnings on overlapping actuals.}
+@cindex @option{-gnatw.I} (@command{gcc})
+This switch disables warnings on overlapping actuals in a call..
+
@item -gnatwj
@emph{Activate warnings on obsolescent features (Annex J).}
@cindex @option{-gnatwj} (@command{gcc})
a space must separate the two tokens.
@item
+if the token following a right parenthesis starts with a letter or digit, then
+a space must separate the two tokens.
+
+@item
A right parenthesis must either be the first non-blank character on
a line, or it must be preceded by a non-blank character.
XTRA_PARENS, and DOS_LINE_ENDINGS. In addition
@end ifset
-
-
The switch
@ifclear vms
@option{-gnatyN}
@ifclear vms
@item -eL
@cindex @option{-eL} (@command{gnatmake})
+@cindex symbolic links
Follow all symbolic links when processing project files.
+This should be used if your project uses symbolic links for files or
+directories, but is not needed in other cases.
+
+@cindex naming scheme
+This also assumes that no directory matches the naming scheme for files (for
+instance that you do not have a directory called "sources.ads" when using the
+default GNAT naming scheme).
+
+When you do not have to use this switch (ie by default), gnatmake is able to
+save a lot of system calls (several per source file and object file), which
+can result in a significant speed up to load and manipulate a project file,
+especially when using source files from a remote system.
+
@end ifclear
@item ^-eS^/STANDARD_OUTPUT_FOR_COMMANDS^
@item
@code{Cross_Reference}
@item
+@code{Check}
+@item
@code{Eliminate}
@item
@code{Pretty_Printer}
package @code{Linker} for command LINK (invoking @code{^gnatlink^gnatlink^})
@item
+package @code{Check} for command CHECK
+(invoking @code{^gnatcheck^gnatcheck^})
+
+@item
package @code{Metrics} for command METRIC
(invoking @code{^gnatmetric^gnatmetric^})
use the @code{gnat} driver (see @ref{The GNAT Driver and Project Files}).
@menu
-* gnatxref Switches::
-* gnatfind Switches::
+* Switches for gnatxref::
+* Switches for gnatfind::
* Project Files for gnatxref and gnatfind::
* Regular Expressions in gnatfind and gnatxref::
* Examples of gnatxref Usage::
* Examples of gnatfind Usage::
@end menu
-@node gnatxref Switches
+@node Switches for gnatxref
@section @code{gnatxref} Switches
@noindent
you can say @samp{gnatxref ^-ag^/ALL_FILES/IGNORE_LOCALS^} instead of
@samp{gnatxref ^-a -g^/ALL_FILES /IGNORE_LOCALS^}.
-@node gnatfind Switches
+@node Switches for gnatfind
@section @code{gnatfind} Switches
@noindent
* Project-Wide Checks::
* Rule exemption::
* Predefined Rules::
+* Example of gnatcheck Usage::
@end menu
@node Format of the Report File
Short format of the report file (no version information, no list of applied
rules, no list of checked sources is included)
-@cindex @option{^-s1^/COMPILER_STYLE^} (@command{gnatcheck})
-@item ^-s1^/COMPILER_STYLE^
-Include the compiler-style section in the report file
-
-@cindex @option{^-s2^/BY_RULES^} (@command{gnatcheck})
-@item ^-s2^/BY_RULES^
-Include the section containing diagnostics ordered by rules in the report file
-
-@cindex @option{^-s3^/BY_FILES_BY_RULES^} (@command{gnatcheck})
-@item ^-s3^/BY_FILES_BY_RULES^
-Include the section containing diagnostics ordered by files and then by rules
-in the report file
+@cindex @option{^--include-file=@var{file}^/INCLUDE_FILE=@var{file}^} (@command{gnatcheck})
+@item ^--include-file^/INCLUDE_FILE^
+Append the content of the specified text file to the report file
@cindex @option{^-t^/TIME^} (@command{gnatcheck})
@item ^-t^/TIME^
@cindex @option{-from} (@command{gnatcheck})
@item -from=@var{rule_option_filename}
-Read the rule options from the text file @var{rule_option_filename}, referred as
-``rule file'' below.
+Read the rule options from the text file @var{rule_option_filename}, referred
+to as a ``coding standard file'' below.
@end table
@noindent
The default behavior is that all the rule checks are disabled.
-A rule file is a text file containing a set of rule options.
-@cindex Rule file (for @code{gnatcheck})
+A coding standard file is a text file that contains a set of rule options
+described above.
+@cindex Coding standard file (for @code{gnatcheck})
The file may contain empty lines and Ada-style comments (comment
-lines and end-of-line comments). The rule file has free format; that is,
-you do not have to start a new rule option on a new line.
+lines and end-of-line comments). There can be several rule options on a
+single line (separated by a space).
-A rule file may contain other @option{-from=@var{rule_option_filename}}
+A coding standard file may reference other coding standard files by including
+more @option{-from=@var{rule_option_filename}}
options, each such option being replaced with the content of the
-corresponding rule file during the rule files processing. In case a
+corresponding coding standard file during processing. In case a
cycle is detected (that is, @file{@var{rule_file_1}} reads rule options
from @file{@var{rule_file_2}}, and @file{@var{rule_file_2}} reads
(directly or indirectly) rule options from @file{@var{rule_file_1}}),
-the processing of rule files is interrupted and a part of their content
-is ignored.
+processing fails with an error message.
@node Adding the Results of Compiler Checks to gnatcheck Output
@group
pragma Annotate (gnatcheck, @i{exemption_control}, @i{Rule_Name}, [@i{justification}]);
-@i{exemption_control} ::= "Exempt_On" | "Exempt_Off"
+@i{exemption_control} ::= Exempt_On | Exempt_Off
@i{Rule_Name} ::= string_literal
delimited by an @code{exempt_on} and @code{exempt_off} annotation pair:
@smallexample @c ada
-pragma Annotate (gnatcheck, "Exempt_On", Rule_Name, "justification");
+pragma Annotate (gnatcheck, Exempt_On, Rule_Name, "justification");
-- source code section
-pragma Annotate (gnatcheck, "Exempt_Off", Rule_Name);
+pragma Annotate (gnatcheck, Exempt_Off, Rule_Name);
@end smallexample
@cindex @code{Anonymous_Subtypes} rule (for @command{gnatcheck})
@noindent
-Flag all uses of anonymous subtypes. A use of an anonymous subtype is
+Flag all uses of anonymous subtypes (except cases when subtype indication
+is a part of a record component definition, and this subtype indication
+depends on a discriminant). A use of an anonymous subtype is
any instance of a subtype indication with a constraint, other than one
that occurs immediately within a subtype declaration. Any use of a range
other than as a constraint used immediately within a subtype declaration
@cindex @code{Positional_Generic_Parameters} rule (for @command{gnatcheck})
@noindent
-Flag each instantiation using positional parameter notation.
+Flag each positional actual generic parameter except for the case when
+the generic unit being iinstantiated has exactly one generic formal
+parameter.
This rule has no parameters.
@cindex @code{Positional_Parameters} rule (for @command{gnatcheck})
@noindent
-Flag each subprogram or entry call using positional parameter notation,
+Flag each positional parameter notation in a subprogram or entry call,
except for the following:
@itemize @bullet
@item
-Invocations of prefix or infix operators are not flagged
+Parameters of calls to of prefix or infix operators are not flagged
@item
If the called subprogram or entry has only one formal parameter,
-the call is not flagged;
+the parameter of the call is not flagged;
@item
If a subprogram call uses the @emph{Object.Operation} notation, then
@itemize @minus
This rule has no parameters.
+@node Example of gnatcheck Usage
+@section Example of @command{gnatcheck} Usage
+
+@noindent
+Here is a simple example. Suppose that in the current directory we have a
+project file named @file{gnatcheck_example.gpr} with the following content:
+
+@smallexample @c projectfile
+project Gnatcheck_Example is
+
+ for Source_Dirs use ("src");
+ for Object_Dir use "obj";
+ for Main use ("main.adb");
+
+ package Check is
+ for Default_Switches ("ada") use ("-rules", "-from=coding_standard");
+ end Check;
+
+end Gnatcheck_Example;
+@end smallexample
+
+@noindent
+And the file named @file{coding_standard} is also located in the current
+directory and has the following content:
+
+@smallexample
+-----------------------------------------------------
+-- This is a sample gnatcheck coding standard file --
+-----------------------------------------------------
+
+-- First, turning on rules, that are directly implemented in gnatcheck
++RAbstract_Type_Declarations
++RAnonymous_Arrays
++RLocal_Packages
++RFloat_Equality_Checks
++REXIT_Statements_With_No_Loop_Name
+
+-- Then, activating compiler checks of interest:
++RStyle_Checks:e
+-- This style check checks if a unit name is present on END keyword that
+-- is the end of the unit declaration
+@end smallexample
+
+@noindent
+And the subdirectory @file{src} contains the following Ada sources:
+
+@file{pack.ads}:
+
+@smallexample @c ada
+package Pack is
+ type T is abstract tagged private;
+ procedure P (X : T) is abstract;
+
+ package Inner is
+ type My_Float is digits 8;
+ function Is_Equal (L, R : My_Float) return Boolean;
+ end Inner;
+private
+ type T is abstract tagged null record;
+end;
+@end smallexample
+
+@noindent
+@file{pack.adb}:
+
+@smallexample @c ada
+package body Pack is
+ package body Inner is
+ function Is_Equal (L, R : My_Float) return Boolean is
+ begin
+ return L = R;
+ end;
+ end Inner;
+end Pack;
+@end smallexample
+
+@noindent
+and @file{main.adb}
+
+@smallexample @c ada
+with Pack; use Pack;
+procedure Main is
+
+ pragma Annotate
+ (gnatcheck, Exempt_On, "Anonymous_Arrays", "this one is fine");
+ Float_Array : array (1 .. 10) of Inner.My_Float;
+ pragma Annotate (gnatcheck, Exempt_Off, "Anonymous_Arrays");
+
+ Another_Float_Array : array (1 .. 10) of Inner.My_Float;
+
+ use Inner;
+
+ B : Boolean := False;
+
+begin
+ for J in Float_Array'Range loop
+ if Is_Equal (Float_Array (J), Another_Float_Array (J)) then
+ B := True;
+ exit;
+ end if;
+ end loop;
+end Main;
+@end smallexample
+
+@noindent
+And suppose we call @command{gnatcheck} from the current directory using
+the @command{gnat} driver:
+
+@smallexample
+ gnat check -Pgnatcheck_example.gpr
+@end smallexample
+
+@noindent
+As a result, @command{gnatcheck} is called to check all the files from the
+project @file{gnatcheck_example.gpr} using the coding standard defined by
+the file @file{coding_standard}. As the result, the @command{gnatcheck}
+report file named @file{gnatcheck.out} will be created in the current
+directory, and it will have the following content:
+
+@smallexample
+RULE CHECKING REPORT
+
+1. OVERVIEW
+
+Date and time of execution: 2009.10.28 14:17
+Tool version: GNATCHECK (built with ASIS 2.0.R for GNAT Pro 6.3.0w (20091016))
+Command line:
+
+gnatcheck -files=.../GNAT-TEMP-000004.TMP -cargs -gnatec=.../GNAT-TEMP-000003.TMP -rules -from=coding_standard
+
+Coding standard (applied rules):
+ Abstract_Type_Declarations
+ Anonymous_Arrays
+ EXIT_Statements_With_No_Loop_Name
+ Float_Equality_Checks
+ Local_Packages
+
+ Compiler style checks: -gnatye
+
+Number of coding standard violations: 6
+Number of exempted coding standard violations: 1
+
+2. DETECTED RULE VIOLATIONS
+
+2.1. NON-EXEMPTED VIOLATIONS
+
+Source files with non-exempted violations
+ pack.ads
+ pack.adb
+ main.adb
+
+List of violations grouped by files, and ordered by increasing source location:
+
+pack.ads:2:4: declaration of abstract type
+pack.ads:5:4: declaration of local package
+pack.ads:10:30: declaration of abstract type
+pack.ads:11:1: (style) "end Pack" required
+pack.adb:5:19: use of equality operation for float values
+pack.adb:6:7: (style) "end Is_Equal" required
+main.adb:9:26: anonymous array type
+main.adb:19:10: exit statement with no loop name
+
+2.2. EXEMPTED VIOLATIONS
+
+Source files with exempted violations
+ main.adb
+
+List of violations grouped by files, and ordered by increasing source location:
+
+main.adb:6:18: anonymous array type
+ (this one is fine)
+
+2.3. SOURCE FILES WITH NO VIOLATION
+
+ No files without violations
+
+END OF REPORT
+@end smallexample
+
@c *********************************
@node Creating Sample Bodies Using gnatstub
OSDN Git Service
