-- --
-- B o d y --
-- --
--- Copyright (C) 1992-2005 Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2009, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
--- ware Foundation; either version 2, or (at your option) any later ver- --
+-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
--- Public License distributed with GNAT; see file COPYING. If not, write --
--- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, --
--- Boston, MA 02110-1301, USA. --
+-- Public License distributed with GNAT; see file COPYING3. If not, go to --
+-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
with Opt; use Opt;
with Osint; use Osint;
with Output; use Output;
+with Par_SCO;
with Prepcomp;
with Repinfo; use Repinfo;
with Restrict;
+with Rtsfind;
+with SCOs;
with Sem;
with Sem_Ch8;
with Sem_Ch12;
with Snames;
with Sprint; use Sprint;
with Stringt;
-with Targparm;
+with Stylesw; use Stylesw;
+with Targparm; use Targparm;
with Tree_Gen;
with Treepr; use Treepr;
with Ttypes;
with Uname; use Uname;
with Urealp;
with Usage;
+with Validsw; use Validsw;
with System.Assertions;
Back_End_Mode : Back_End.Back_End_Mode_Type;
-- Record back end mode
-begin
- -- This inner block is set up to catch assertion errors and constraint
- -- errors. Since the code for handling these errors can cause another
- -- exception to be raised (namely Unrecoverable_Error), we need two
- -- nested blocks, so that the outer one handles unrecoverable error.
+ procedure Adjust_Global_Switches;
+ -- There are various interactions between front end switch settings,
+ -- including debug switch settings and target dependent parameters.
+ -- This procedure takes care of properly handling these interactions.
+ -- We do it after scanning out all the switches, so that we are not
+ -- depending on the order in which switches appear.
+
+ procedure Check_Bad_Body;
+ -- Called to check if the unit we are compiling has a bad body
+
+ procedure Check_Rep_Info;
+ -- Called when we are not generating code, to check if -gnatR was requested
+ -- and if so, explain that we will not be honoring the request.
+
+ procedure Check_Library_Items;
+ -- For debugging -- checks the behavior of Walk_Library_Items
+ pragma Warnings (Off, Check_Library_Items);
+ -- In case the call below is commented out
+
+ ----------------------------
+ -- Adjust_Global_Switches --
+ ----------------------------
+ procedure Adjust_Global_Switches is
begin
- -- Lib.Initialize need to be called before Scan_Compiler_Arguments,
- -- because it initialize a table that is filled by
- -- Scan_Compiler_Arguments.
+ -- Debug flag -gnatd.I is a synonym for Generate_SCIL and requires code
+ -- generation.
- Osint.Initialize;
- Fmap.Reset_Tables;
- Lib.Initialize;
- Lib.Xref.Initialize;
- Scan_Compiler_Arguments;
- Osint.Add_Default_Search_Dirs;
+ if Debug_Flag_Dot_II
+ and then Operating_Mode = Generate_Code
+ then
+ Generate_SCIL := True;
+ end if;
- Nlists.Initialize;
- Sinput.Initialize;
- Sem.Initialize;
- Csets.Initialize;
- Uintp.Initialize;
- Urealp.Initialize;
- Errout.Initialize;
- Namet.Initialize;
- Snames.Initialize;
- Stringt.Initialize;
- Inline.Initialize;
- Sem_Ch8.Initialize;
- Sem_Ch12.Initialize;
- Sem_Ch13.Initialize;
- Sem_Elim.Initialize;
- Sem_Eval.Initialize;
- Sem_Type.Init_Interp_Tables;
+ -- Set ASIS mode if -gnatt and -gnatc are set
- -- Acquire target parameters from system.ads (source of package System)
+ if Operating_Mode = Check_Semantics and then Tree_Output then
+ ASIS_Mode := True;
- declare
- use Sinput;
+ -- Turn off inlining in ASIS mode, since ASIS cannot handle the extra
+ -- information in the trees caused by inlining being active.
- S : Source_File_Index;
- N : Name_Id;
+ -- More specifically, the tree seems to be malformed from the ASIS
+ -- point of view if -gnatc and -gnatn appear together???
- begin
- Name_Buffer (1 .. 10) := "system.ads";
- Name_Len := 10;
- N := Name_Find;
- S := Load_Source_File (N);
+ Inline_Active := False;
- if S = No_Source_File then
- Write_Line
- ("fatal error, run-time library not installed correctly");
- Write_Line
- ("cannot locate file system.ads");
- raise Unrecoverable_Error;
+ -- Turn off SCIL generation in ASIS mode, since SCIL requires front-
+ -- end expansion.
- -- Remember source index of system.ads (which was read successfully)
+ Generate_SCIL := False;
+ end if;
- else
- System_Source_File_Index := S;
- end if;
+ -- SCIL mode needs to disable front-end inlining since the generated
+ -- trees (in particular order and consistency between specs compiled
+ -- as part of a main unit or as part of a with-clause) are causing
+ -- troubles.
- Targparm.Get_Target_Parameters
- (System_Text => Source_Text (S),
- Source_First => Source_First (S),
- Source_Last => Source_Last (S));
+ if Generate_SCIL then
+ Front_End_Inlining := False;
+ end if;
- -- Acquire configuration pragma information from Targparm
+ -- Tune settings for optimal SCIL generation in CodePeer_Mode
- Restrict.Restrictions := Targparm.Restrictions_On_Target;
- end;
+ if CodePeer_Mode then
+
+ -- Turn off inlining, confuses CodePeer output and gains nothing
+
+ Front_End_Inlining := False;
+ Inline_Active := False;
+
+ -- Turn off ASIS mode: incompatible with front-end expansion
+
+ ASIS_Mode := False;
+
+ -- Disable front-end optimizations, to keep the tree as close to the
+ -- source code as possible, and also to avoid inconsistencies between
+ -- trees when using different optimization switches.
+
+ Optimization_Level := 0;
+
+ -- Disable specific expansions for Restrictions pragmas to avoid
+ -- tree inconsistencies between compilations with different pragmas
+ -- that will cause different SCIL files to be generated for the
+ -- same Ada spec.
+
+ Treat_Restrictions_As_Warnings := True;
+
+ -- Suppress overflow, division by zero and access checks since they
+ -- are handled implicitly by CodePeer.
+
+ -- Turn off dynamic elaboration checks: generates inconsistencies in
+ -- trees between specs compiled as part of a main unit or as part of
+ -- a with-clause.
+
+ -- Turn off alignment checks: these cannot be proved statically by
+ -- CodePeer and generate false positives.
+
+ -- Enable all other language checks
+
+ Suppress_Options :=
+ (Access_Check => True,
+ Alignment_Check => True,
+ Division_Check => True,
+ Elaboration_Check => True,
+ Overflow_Check => True,
+ others => False);
+ Enable_Overflow_Checks := False;
+ Dynamic_Elaboration_Checks := False;
+
+ -- Kill debug of generated code, since it messes up sloc values
+
+ Debug_Generated_Code := False;
+
+ -- Turn cross-referencing on in case it was disabled (by e.g. -gnatD)
+ -- Do we really need to spend time generating xref in CodePeer
+ -- mode??? Consider setting Xref_Active to False.
+
+ Xref_Active := True;
+
+ -- Polling mode forced off, since it generates confusing junk
+
+ Polling_Required := False;
+
+ -- Set operating mode to Generate_Code to benefit from full
+ -- front-end expansion (e.g. generics).
+
+ Operating_Mode := Generate_Code;
+
+ -- We need SCIL generation of course
+
+ Generate_SCIL := True;
+
+ -- Enable assertions and debug pragmas, since they give CodePeer
+ -- valuable extra information.
+
+ Assertions_Enabled := True;
+ Debug_Pragmas_Enabled := True;
+
+ -- Suppress compiler warnings, since what we are interested in here
+ -- is what CodePeer can find out. Also disable all simple value
+ -- propagation. This is an optimization which is valuable for code
+ -- optimization, and also for generation of compiler warnings, but
+ -- these are being turned off anyway, and CodePeer understands
+ -- things more clearly if references are not optimized in this way.
+
+ Warning_Mode := Suppress;
+ Debug_Flag_MM := True;
+
+ -- Set normal RM validity checking, and checking of IN OUT parameters
+ -- (this might give CodePeer more useful checks to analyze, to be
+ -- confirmed???). All other validity checking is turned off, since
+ -- this can generate very complex trees that only confuse CodePeer
+ -- and do not bring enough useful info.
+
+ Reset_Validity_Check_Options;
+ Validity_Check_Default := True;
+ Validity_Check_In_Out_Params := True;
+ Validity_Check_In_Params := True;
+
+ -- Turn off style check options since we are not interested in any
+ -- front-end warnings when we are getting CodePeer output.
+
+ Reset_Style_Check_Options;
+ end if;
-- Set Configurable_Run_Time mode if system.ads flag set
List_Representation_Info_Mechanisms := True;
end if;
- -- Output copyright notice if full list mode
+ -- Force Target_Strict_Alignment true if debug flag -gnatd.a is set
- if (Verbose_Mode or Full_List)
- and then (not Debug_Flag_7)
- then
- Write_Eol;
- Write_Str ("GNAT ");
- Write_Str (Gnat_Version_String);
- Write_Eol;
- Write_Str ("Copyright 1992-2005 Free Software Foundation, Inc.");
- Write_Eol;
+ if Debug_Flag_Dot_A then
+ Ttypes.Target_Strict_Alignment := True;
+ end if;
+
+ -- Disable static allocation of dispatch tables if -gnatd.t or if layout
+ -- is enabled. The front end's layout phase currently treats types that
+ -- have discriminant-dependent arrays as not being static even when a
+ -- discriminant constraint on the type is static, and this leads to
+ -- problems with subtypes of type Ada.Tags.Dispatch_Table_Wrapper. ???
+
+ if Debug_Flag_Dot_T or else Frontend_Layout_On_Target then
+ Static_Dispatch_Tables := False;
end if;
- -- Before we do anything else, adjust certain global values for
- -- debug switches which modify their normal natural settings.
+ -- Flip endian mode if -gnatd8 set
if Debug_Flag_8 then
Ttypes.Bytes_Big_Endian := not Ttypes.Bytes_Big_Endian;
end if;
+ -- Deal with forcing OpenVMS switches True if debug flag M is set, but
+ -- record the setting of Targparm.Open_VMS_On_Target in True_VMS_Target
+ -- before doing this, so we know if we are in real OpenVMS or not!
+
+ Opt.True_VMS_Target := Targparm.OpenVMS_On_Target;
+
if Debug_Flag_M then
Targparm.OpenVMS_On_Target := True;
Hostparm.OpenVMS := True;
end if;
+ -- Activate front end layout if debug flag -gnatdF is set
+
if Debug_Flag_FF then
Targparm.Frontend_Layout_On_Target := True;
end if;
- -- We take the default exception mechanism into account
+ -- Set and check exception mechnism
if Targparm.ZCX_By_Default_On_Target then
if Targparm.GCC_ZCX_Support_On_Target then
- Exception_Mechanism := Back_End_ZCX_Exceptions;
- else
- Exception_Mechanism := Front_End_ZCX_Exceptions;
- end if;
- end if;
-
- -- We take the command line exception mechanism into account
-
- if Opt.Zero_Cost_Exceptions_Set then
- if Opt.Zero_Cost_Exceptions_Val = False then
- Exception_Mechanism := Front_End_Setjmp_Longjmp_Exceptions;
-
- elsif Debug_Flag_XX then
- Exception_Mechanism := Front_End_ZCX_Exceptions;
-
- elsif Targparm.GCC_ZCX_Support_On_Target then
- Exception_Mechanism := Back_End_ZCX_Exceptions;
-
- elsif Targparm.Front_End_ZCX_Support_On_Target then
- Exception_Mechanism := Front_End_ZCX_Exceptions;
-
+ Exception_Mechanism := Back_End_Exceptions;
else
- Osint.Fail
- ("Zero Cost Exceptions not supported on this target");
+ Osint.Fail ("Zero Cost Exceptions not supported on this target");
end if;
end if;
else
Suppress_Options (Overflow_Check) := True;
end if;
+ end Adjust_Global_Switches;
- -- Check we have exactly one source file, this happens only in the case
- -- where the driver is called directly, it cannot happen when gnat1 is
- -- invoked from gcc in the normal case.
+ --------------------
+ -- Check_Bad_Body --
+ --------------------
- if Osint.Number_Of_Files /= 1 then
- Usage;
- Write_Eol;
- Osint.Fail ("you must provide one source file");
+ procedure Check_Bad_Body is
+ Sname : Unit_Name_Type;
+ Src_Ind : Source_File_Index;
+ Fname : File_Name_Type;
- elsif Usage_Requested then
- Usage;
- end if;
+ procedure Bad_Body_Error (Msg : String);
+ -- Issue message for bad body found
- Original_Operating_Mode := Operating_Mode;
- Frontend;
- Main_Unit_Node := Cunit (Main_Unit);
- Main_Kind := Nkind (Unit (Main_Unit_Node));
+ --------------------
+ -- Bad_Body_Error --
+ --------------------
- -- Check for suspicious or incorrect body present if we are doing
- -- semantic checking. We omit this check in syntax only mode, because
- -- in that case we do not know if we need a body or not.
+ procedure Bad_Body_Error (Msg : String) is
+ begin
+ Error_Msg_N (Msg, Main_Unit_Node);
+ Error_Msg_File_1 := Fname;
+ Error_Msg_N ("remove incorrect body in file{!", Main_Unit_Node);
+ end Bad_Body_Error;
- if Operating_Mode /= Check_Syntax
- and then
- ((Main_Kind = N_Package_Declaration
- and then not Body_Required (Main_Unit_Node))
- or else (Main_Kind = N_Generic_Package_Declaration
- and then not Body_Required (Main_Unit_Node))
- or else Main_Kind = N_Package_Renaming_Declaration
- or else Main_Kind = N_Subprogram_Renaming_Declaration
- or else Nkind (Original_Node (Unit (Main_Unit_Node)))
- in N_Generic_Instantiation)
- then
- Bad_Body : declare
- Sname : Unit_Name_Type := Unit_Name (Main_Unit);
- Src_Ind : Source_File_Index;
- Fname : File_Name_Type;
-
- procedure Bad_Body_Error (Msg : String);
- -- Issue message for bad body found
-
- --------------------
- -- Bad_Body_Error --
- --------------------
-
- procedure Bad_Body_Error (Msg : String) is
- begin
- Error_Msg_N (Msg, Main_Unit_Node);
- Error_Msg_Name_1 := Fname;
- Error_Msg_N
- ("remove incorrect body in file{!", Main_Unit_Node);
- end Bad_Body_Error;
+ -- Start of processing for Check_Bad_Body
- -- Start of processing for Bad_Body
+ begin
+ -- Nothing to do if we are only checking syntax, because we don't know
+ -- enough to know if we require or forbid a body in this case.
- begin
- Sname := Unit_Name (Main_Unit);
+ if Operating_Mode = Check_Syntax then
+ return;
+ end if;
- -- If we do not already have a body name, then get the body name
- -- (but how can we have a body name here ???)
+ -- Check for body not allowed
- if not Is_Body_Name (Sname) then
- Sname := Get_Body_Name (Sname);
- end if;
+ if (Main_Kind = N_Package_Declaration
+ and then not Body_Required (Main_Unit_Node))
+ or else (Main_Kind = N_Generic_Package_Declaration
+ and then not Body_Required (Main_Unit_Node))
+ or else Main_Kind = N_Package_Renaming_Declaration
+ or else Main_Kind = N_Subprogram_Renaming_Declaration
+ or else Nkind (Original_Node (Unit (Main_Unit_Node)))
+ in N_Generic_Instantiation
+ then
+ Sname := Unit_Name (Main_Unit);
+
+ -- If we do not already have a body name, then get the body name
+ -- (but how can we have a body name here ???)
+
+ if not Is_Body_Name (Sname) then
+ Sname := Get_Body_Name (Sname);
+ end if;
- Fname := Get_File_Name (Sname, Subunit => False);
- Src_Ind := Load_Source_File (Fname);
-
- -- Case where body is present and it is not a subunit. Exclude
- -- the subunit case, because it has nothing to do with the
- -- package we are compiling. It is illegal for a child unit and a
- -- subunit with the same expanded name (RM 10.2(9)) to appear
- -- together in a partition, but there is nothing to stop a
- -- compilation environment from having both, and the test here
- -- simply allows that. If there is an attempt to include both in
- -- a partition, this is diagnosed at bind time. In Ada 83 mode
- -- this is not a warning case.
-
- -- Note: if weird file names are being used, we can have
- -- situation where the file name that supposedly contains body,
- -- in fact contains a spec, or we can't tell what it contains.
- -- Skip the error message in these cases.
-
- if Src_Ind /= No_Source_File
- and then Get_Expected_Unit_Type (Fname) = Expect_Body
- and then not Source_File_Is_Subunit (Src_Ind)
+ Fname := Get_File_Name (Sname, Subunit => False);
+ Src_Ind := Load_Source_File (Fname);
+
+ -- Case where body is present and it is not a subunit. Exclude
+ -- the subunit case, because it has nothing to do with the
+ -- package we are compiling. It is illegal for a child unit and a
+ -- subunit with the same expanded name (RM 10.2(9)) to appear
+ -- together in a partition, but there is nothing to stop a
+ -- compilation environment from having both, and the test here
+ -- simply allows that. If there is an attempt to include both in
+ -- a partition, this is diagnosed at bind time. In Ada 83 mode
+ -- this is not a warning case.
+
+ -- Note: if weird file names are being used, we can have
+ -- situation where the file name that supposedly contains body,
+ -- in fact contains a spec, or we can't tell what it contains.
+ -- Skip the error message in these cases.
+
+ -- Also ignore body that is nothing but pragma No_Body; (that's the
+ -- whole point of this pragma, to be used this way and to cause the
+ -- body file to be ignored in this context).
+
+ if Src_Ind /= No_Source_File
+ and then Get_Expected_Unit_Type (Fname) = Expect_Body
+ and then not Source_File_Is_Subunit (Src_Ind)
+ and then not Source_File_Is_No_Body (Src_Ind)
+ then
+ Errout.Finalize (Last_Call => False);
+
+ Error_Msg_Unit_1 := Sname;
+
+ -- Ada 83 case of a package body being ignored. This is not an
+ -- error as far as the Ada 83 RM is concerned, but it is almost
+ -- certainly not what is wanted so output a warning. Give this
+ -- message only if there were no errors, since otherwise it may
+ -- be incorrect (we may have misinterpreted a junk spec as not
+ -- needing a body when it really does).
+
+ if Main_Kind = N_Package_Declaration
+ and then Ada_Version = Ada_83
+ and then Operating_Mode = Generate_Code
+ and then Distribution_Stub_Mode /= Generate_Caller_Stub_Body
+ and then not Compilation_Errors
then
- Error_Msg_Name_1 := Sname;
-
- -- Ada 83 case of a package body being ignored. This is not an
- -- error as far as the Ada 83 RM is concerned, but it is
- -- almost certainly not what is wanted so output a warning.
- -- Give this message only if there were no errors, since
- -- otherwise it may be incorrect (we may have misinterpreted a
- -- junk spec as not needing a body when it really does).
-
- if Main_Kind = N_Package_Declaration
- and then Ada_Version = Ada_83
- and then Operating_Mode = Generate_Code
- and then Distribution_Stub_Mode /= Generate_Caller_Stub_Body
- and then not Compilation_Errors
- then
- Error_Msg_N
- ("package % does not require a body?!", Main_Unit_Node);
- Error_Msg_Name_1 := Fname;
- Error_Msg_N
- ("body in file{?! will be ignored", Main_Unit_Node);
+ Error_Msg_N
+ ("package $$ does not require a body?", Main_Unit_Node);
+ Error_Msg_File_1 := Fname;
+ Error_Msg_N ("body in file{? will be ignored", Main_Unit_Node);
-- Ada 95 cases of a body file present when no body is
-- permitted. This we consider to be an error.
- else
- -- For generic instantiations, we never allow a body
+ else
+ -- For generic instantiations, we never allow a body
- if Nkind (Original_Node (Unit (Main_Unit_Node)))
- in N_Generic_Instantiation
- then
- Bad_Body_Error
- ("generic instantiation for % does not allow a body");
+ if Nkind (Original_Node (Unit (Main_Unit_Node)))
+ in N_Generic_Instantiation
+ then
+ Bad_Body_Error
+ ("generic instantiation for $$ does not allow a body");
-- A library unit that is a renaming never allows a body
- elsif Main_Kind in N_Renaming_Declaration then
- Bad_Body_Error
- ("renaming declaration for % does not allow a body!");
+ elsif Main_Kind in N_Renaming_Declaration then
+ Bad_Body_Error
+ ("renaming declaration for $$ does not allow a body!");
-- Remaining cases are packages and generic packages. Here
-- we only do the test if there are no previous errors,
-- incorrectly believe that a package does not allow a body
-- when in fact it does.
- elsif not Compilation_Errors then
- if Main_Kind = N_Package_Declaration then
- Bad_Body_Error
- ("package % does not allow a body!");
+ elsif not Compilation_Errors then
+ if Main_Kind = N_Package_Declaration then
+ Bad_Body_Error
+ ("package $$ does not allow a body!");
- elsif Main_Kind = N_Generic_Package_Declaration then
- Bad_Body_Error
- ("generic package % does not allow a body!");
- end if;
+ elsif Main_Kind = N_Generic_Package_Declaration then
+ Bad_Body_Error
+ ("generic package $$ does not allow a body!");
end if;
-
end if;
+
end if;
- end Bad_Body;
+ end if;
+ end if;
+ end Check_Bad_Body;
+
+ -------------------------
+ -- Check_Library_Items --
+ -------------------------
+
+ -- Walk_Library_Items has plenty of assertions, so all we need to do is
+ -- call it, just for these assertions, not actually doing anything else.
+
+ procedure Check_Library_Items is
+
+ procedure Action (Item : Node_Id);
+ -- Action passed to Walk_Library_Items to do nothing
+
+ ------------
+ -- Action --
+ ------------
+
+ procedure Action (Item : Node_Id) is
+ begin
+ null;
+ end Action;
+
+ procedure Walk is new Sem.Walk_Library_Items (Action);
+
+ -- Start of processing for Check_Library_Items
+
+ begin
+ Walk;
+ end Check_Library_Items;
+
+ --------------------
+ -- Check_Rep_Info --
+ --------------------
+
+ procedure Check_Rep_Info is
+ begin
+ if List_Representation_Info /= 0
+ or else List_Representation_Info_Mechanisms
+ then
+ Set_Standard_Error;
+ Write_Eol;
+ Write_Str
+ ("cannot generate representation information, no code generated");
+ Write_Eol;
+ Write_Eol;
+ Set_Standard_Output;
end if;
+ end Check_Rep_Info;
+
+-- Start of processing for Gnat1drv
+
+begin
+ -- This inner block is set up to catch assertion errors and constraint
+ -- errors. Since the code for handling these errors can cause another
+ -- exception to be raised (namely Unrecoverable_Error), we need two
+ -- nested blocks, so that the outer one handles unrecoverable error.
+
+ begin
+ -- Initialize all packages. For the most part, these initialization
+ -- calls can be made in any order. Exceptions are as follows:
+
+ -- Lib.Initialize need to be called before Scan_Compiler_Arguments,
+ -- because it initializes a table filled by Scan_Compiler_Arguments.
+
+ Osint.Initialize;
+ Fmap.Reset_Tables;
+ Lib.Initialize;
+ Lib.Xref.Initialize;
+ Scan_Compiler_Arguments;
+ Osint.Add_Default_Search_Dirs;
+
+ Nlists.Initialize;
+ Sinput.Initialize;
+ Sem.Initialize;
+ Csets.Initialize;
+ Uintp.Initialize;
+ Urealp.Initialize;
+ Errout.Initialize;
+ Namet.Initialize;
+ SCOs.Initialize;
+ Snames.Initialize;
+ Stringt.Initialize;
+ Inline.Initialize;
+ Par_SCO.Initialize;
+ Sem_Ch8.Initialize;
+ Sem_Ch12.Initialize;
+ Sem_Ch13.Initialize;
+ Sem_Elim.Initialize;
+ Sem_Eval.Initialize;
+ Sem_Type.Init_Interp_Tables;
+
+ -- Acquire target parameters from system.ads (source of package System)
+
+ declare
+ use Sinput;
+
+ S : Source_File_Index;
+ N : File_Name_Type;
+
+ begin
+ Name_Buffer (1 .. 10) := "system.ads";
+ Name_Len := 10;
+ N := Name_Find;
+ S := Load_Source_File (N);
+
+ if S = No_Source_File then
+ Write_Line
+ ("fatal error, run-time library not installed correctly");
+ Write_Line
+ ("cannot locate file system.ads");
+ raise Unrecoverable_Error;
+
+ -- Remember source index of system.ads (which was read successfully)
+
+ else
+ System_Source_File_Index := S;
+ end if;
+
+ Targparm.Get_Target_Parameters
+ (System_Text => Source_Text (S),
+ Source_First => Source_First (S),
+ Source_Last => Source_Last (S));
+
+ -- Acquire configuration pragma information from Targparm
+
+ Restrict.Restrictions := Targparm.Restrictions_On_Target;
+ end;
+
+ Adjust_Global_Switches;
+
+ -- Output copyright notice if full list mode unless we have a list
+ -- file, in which case we defer this so that it is output in the file
+
+ if (Verbose_Mode or else (Full_List and then Full_List_File_Name = null))
+ and then not Debug_Flag_7
+ then
+ Write_Eol;
+ Write_Str ("GNAT ");
+ Write_Str (Gnat_Version_String);
+ Write_Eol;
+ Write_Str ("Copyright 1992-" &
+ Current_Year &
+ ", Free Software Foundation, Inc.");
+ Write_Eol;
+ end if;
+
+ -- Check we do not have more than one source file, this happens only in
+ -- the case where the driver is called directly, it cannot happen when
+ -- gnat1 is invoked from gcc in the normal case.
+
+ if Osint.Number_Of_Files /= 1 then
+ Usage;
+ Write_Eol;
+ Osint.Fail ("you must provide one source file");
+
+ elsif Usage_Requested then
+ Usage;
+ end if;
+
+ Original_Operating_Mode := Operating_Mode;
+ Frontend;
+
+ -- Exit with errors if the main source could not be parsed
+
+ if Sinput.Main_Source_File = No_Source_File then
+ Errout.Finalize (Last_Call => True);
+ Errout.Output_Messages;
+ Exit_Program (E_Errors);
+ end if;
+
+ Main_Unit_Node := Cunit (Main_Unit);
+ Main_Kind := Nkind (Unit (Main_Unit_Node));
+ Check_Bad_Body;
-- Exit if compilation errors detected
+ Errout.Finalize (Last_Call => False);
+
if Compilation_Errors then
Treepr.Tree_Dump;
Sem_Ch13.Validate_Unchecked_Conversions;
- Errout.Finalize;
+ Sem_Ch13.Validate_Address_Clauses;
+ Errout.Output_Messages;
Namet.Finalize;
-- Generate ALI file if specially requested
Tree_Gen;
end if;
+ Errout.Finalize (Last_Call => True);
Exit_Program (E_Errors);
end if;
Set_Generate_Code (Main_Unit);
- -- If we have a corresponding spec, then we need object
- -- code for the spec unit as well
+ -- If we have a corresponding spec, and it comes from source
+ -- or it is not a generated spec for a child subprogram body,
+ -- then we need object code for the spec unit as well.
if Nkind (Unit (Main_Unit_Node)) in N_Unit_Body
and then not Acts_As_Spec (Main_Unit_Node)
then
- Set_Generate_Code
- (Get_Cunit_Unit_Number (Library_Unit (Main_Unit_Node)));
+ if Nkind (Unit (Main_Unit_Node)) = N_Subprogram_Body
+ and then not Comes_From_Source (Library_Unit (Main_Unit_Node))
+ then
+ null;
+ else
+ Set_Generate_Code
+ (Get_Cunit_Unit_Number (Library_Unit (Main_Unit_Node)));
+ end if;
end if;
-- Case of no code required to be generated, exit indicating no error
if Original_Operating_Mode = Check_Syntax then
Treepr.Tree_Dump;
- Errout.Finalize;
+ Errout.Finalize (Last_Call => True);
+ Errout.Output_Messages;
Tree_Gen;
Namet.Finalize;
- Exit_Program (E_Success);
+ Check_Rep_Info;
+
+ -- Use a goto instead of calling Exit_Program so that finalization
+ -- occurs normally.
+
+ goto End_Of_Program;
elsif Original_Operating_Mode = Check_Semantics then
Back_End_Mode := Declarations_Only;
elsif Main_Kind in N_Generic_Renaming_Declaration then
Back_End_Mode := Generate_Object;
+ -- It's not an error to generate SCIL for e.g. a spec which has a body
+
+ elsif CodePeer_Mode then
+ Back_End_Mode := Generate_Object;
+
-- In all other cases (specs which have bodies, generics, and bodies
-- where subunits are missing), we cannot generate code and we generate
-- a warning message. Note that generic instantiations are gone at this
Back_End_Mode := Skip;
end if;
- -- At this stage Call_Back_End is set to indicate if the backend should
- -- be called to generate code. If it is not set, then code generation
- -- has been turned off, even though code was requested by the original
+ -- At this stage Back_End_Mode is set to indicate if the backend should
+ -- be called to generate code. If it is Skip, then code generation has
+ -- been turned off, even though code was requested by the original
-- command. This is not an error from the user point of view, but it is
-- an error from the point of view of the gcc driver, so we must exit
-- with an error status.
-- generate code).
if Back_End_Mode = Skip then
+ Set_Standard_Error;
Write_Str ("cannot generate code for ");
Write_Str ("file ");
Write_Name (Unit_File_Name (Main_Unit));
end if;
Write_Eol;
+ Set_Standard_Output;
Sem_Ch13.Validate_Unchecked_Conversions;
- Errout.Finalize;
+ Sem_Ch13.Validate_Address_Clauses;
+ Errout.Finalize (Last_Call => True);
+ Errout.Output_Messages;
Treepr.Tree_Dump;
Tree_Gen;
Write_ALI (Object => False);
Namet.Finalize;
+ Check_Rep_Info;
-- Exit program with error indication, to kill object file
-- enabled, because the front end determines representations.
-- Annotation is also suppressed in the case of compiling for
- -- the Java VM, since representations are largely symbolic there.
+ -- a VM, since representations are largely symbolic there.
if Back_End_Mode = Declarations_Only
- and then (not Back_Annotate_Rep_Info
- or else Main_Kind = N_Subunit
- or else Targparm.Frontend_Layout_On_Target
- or else Hostparm.Java_VM)
+ and then (not (Back_Annotate_Rep_Info or Generate_SCIL)
+ or else Main_Kind = N_Subunit
+ or else Targparm.Frontend_Layout_On_Target
+ or else Targparm.VM_Target /= No_VM)
then
Sem_Ch13.Validate_Unchecked_Conversions;
- Errout.Finalize;
+ Sem_Ch13.Validate_Address_Clauses;
+ Errout.Finalize (Last_Call => True);
+ Errout.Output_Messages;
Write_ALI (Object => False);
Tree_Dump;
Tree_Gen;
Namet.Finalize;
+ Check_Rep_Info;
return;
end if;
Namet.Lock;
Stringt.Lock;
+ -- ???Check_Library_Items under control of a debug flag, because it
+ -- currently does not work if the -gnatn switch (back end inlining) is
+ -- used.
+
+ if Debug_Flag_Dot_WW then
+ Check_Library_Items;
+ end if;
+
-- Here we call the back end to generate the output code
+ Generating_Code := True;
Back_End.Call_Back_End (Back_End_Mode);
-- Once the backend is complete, we unlock the names table. This call
Sem_Ch13.Validate_Unchecked_Conversions;
+ -- Validate address clauses (again using alignment values annotated
+ -- by the backend where possible).
+
+ Sem_Ch13.Validate_Address_Clauses;
+
-- Now we complete output of errors, rep info and the tree info. These
-- are delayed till now, since it is perfectly possible for gigi to
-- generate errors, modify the tree (in particular by setting flags
-- indicating that elaboration is required, and also to back annotate
-- representation information for List_Rep_Info.
- Errout.Finalize;
+ Errout.Finalize (Last_Call => True);
+ Errout.Output_Messages;
List_Rep_Info;
-- Only write the library if the backend did not generate any error
exception
-- Handle fatal internal compiler errors
+ when Rtsfind.RE_Not_Available =>
+ Comperr.Compiler_Abort ("RE_Not_Available");
+
when System.Assertions.Assert_Failure =>
Comperr.Compiler_Abort ("Assert_Failure");
Comperr.Compiler_Abort ("Storage_Error");
end;
--- The outer exception handles an unrecoverable error
+ <<End_Of_Program>>
+ null;
+
+ -- The outer exception handles an unrecoverable error
exception
when Unrecoverable_Error =>
- Errout.Finalize;
+ Errout.Finalize (Last_Call => True);
+ Errout.Output_Messages;
Set_Standard_Error;
Write_Str ("compilation abandoned");
OSDN Git Service
