-- --
-- S p e c --
-- --
--- $Revision$
--- --
--- Copyright (C) 1992-2001 Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2006, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNAT; see file COPYING. If not, write --
--- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
--- MA 02111-1307, USA. --
+-- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, --
+-- Boston, MA 02110-1301, USA. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
--- It is now maintained by Ada Core Technologies Inc (http://www.gnat.com). --
+-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
--- This package contains the routines to output error messages. They
--- are basically system independent, however in some environments, e.g.
--- when the parser is embedded into an editor, it may be appropriate
--- to replace the implementation of this package.
+-- This package contains the routines to output error messages. They are
+-- basically system independent, however in some environments, e.g. when the
+-- parser is embedded into an editor, it may be appropriate to replace the
+-- implementation of this package.
+with Err_Vars;
+with Erroutc;
with Table;
with Types; use Types;
with Uintp; use Uintp;
+with System;
+
package Errout is
- Serious_Errors_Detected : Nat;
+ Serious_Errors_Detected : Nat renames Err_Vars.Serious_Errors_Detected;
-- This is a count of errors that are serious enough to stop expansion,
- -- and hence to prevent generation of an object file even if the
- -- switch -gnatQ is set.
+ -- and hence to prevent generation of an object file even if the switch
+ -- -gnatQ is set.
- Total_Errors_Detected : Nat;
- -- Number of errors detected so far. Includes count of serious errors
- -- and non-serious errors, so this value is always greater than or
- -- equal to the Serious_Errors_Detected value.
+ Total_Errors_Detected : Nat renames Err_Vars.Total_Errors_Detected;
+ -- Number of errors detected so far. Includes count of serious errors and
+ -- non-serious errors, so this value is always greater than or equal to
+ -- the Serious_Errors_Detected value.
- Warnings_Detected : Nat;
+ Warnings_Detected : Nat renames Err_Vars.Warnings_Detected;
-- Number of warnings detected
+ Configurable_Run_Time_Violations : Nat := 0;
+ -- Count of configurable run time violations so far. This is used to
+ -- suppress certain cascaded error messages when we know that we may not
+ -- have fully expanded some items, due to high integrity violations (i.e.
+ -- the use of constructs not permitted by the library in use, or improper
+ -- constructs in No_Run_Time mode).
+
type Compiler_State_Type is (Parsing, Analyzing);
Compiler_State : Compiler_State_Type;
- -- Indicates current state of compilation. This is put in the Errout
- -- spec because it affects the action of the error message handling.
- -- In particular, an attempt is made by Errout to suppress cascaded
- -- error messages in Parsing mode, but not in the other modes.
+ -- Indicates current state of compilation. This is put in the Errout spec
+ -- because it affects the action of the error message handling. In
+ -- particular, an attempt is made by Errout to suppress cascaded error
+ -- messages in Parsing mode, but not in the other modes.
- Current_Error_Source_File : Source_File_Index;
+ Current_Error_Source_File : Source_File_Index
+ renames Err_Vars.Current_Error_Source_File;
-- Id of current messages. Used to post file name when unit changes. This
-- is initialized to Main_Source_File at the start of a compilation, which
- -- means that no file names will be output unless there are errors in units
- -- other than the main unit. However, if the main unit has a pragma
- -- Source_Reference line, then this is initialized to No_Source_File,
- -- to force an initial reference to the real source file name.
+ -- means that no file names will be output unless there are errors in
+ -- units other than the main unit. However, if the main unit has a pragma
+ -- Source_Reference line, then this is initialized to No_Source_File, to
+ -- force an initial reference to the real source file name.
- Raise_Exception_On_Error : Nat := 0;
+ Raise_Exception_On_Error : Nat renames Err_Vars.Raise_Exception_On_Error;
-- If this value is non-zero, then any attempt to generate an error
- -- message raises the exception Error_Msg_Exception, and the error
- -- message is not output. This is used for defending against junk
- -- resulting from illegalities, and also for substitution of more
- -- appropriate error messages from higher semantic levels. It is
- -- a counter so that the increment/decrement protocol nests neatly.
+ -- message raises the exception Error_Msg_Exception, and the error message
+ -- is not output. This is used for defending against junk resulting from
+ -- illegalities, and also for substitution of more appropriate error
+ -- messages from higher semantic levels. It is a counter so that the
+ -- increment/decrement protocol nests neatly.
- Error_Msg_Exception : exception;
+ Error_Msg_Exception : exception renames Err_Vars.Error_Msg_Exception;
-- Exception raised if Raise_Exception_On_Error is true
-----------------------------------
-- 5. If a message attempts to insert an Error node, or a direct
-- reference to the Any_Type node, then the message is suppressed.
+ -- 6. Note that cases 2-5 only apply to error messages, not warning
+ -- messages. Warning messages are only suppressed for case 1.
+
-- This normal suppression action may be overridden in cases 2-5 (but not
-- in case 1) by setting All_Errors mode, or by setting the special
-- unconditional message insertion character (!) at the end of the message
-- Insertion character % (Percent: insert name from Names table)
-- The character % is replaced by the text for the name specified by
- -- the Name_Id value stored in Error_Msg_Name_1. A blank precedes
- -- the name if it is preceded by a non-blank character other than a
- -- left parenthesis. The name is enclosed in quotes unless manual
- -- quotation mode is set. If the Name_Id is set to No_Name, then
- -- no insertion occurs; if the Name_Id is set to Error_Name, then
- -- the string <error> is inserted. A second and third % may appear
- -- in a single message, similarly replaced by the names which are
- -- specified by the Name_Id values stored in Error_Msg_Name_2 and
- -- Error_Msg_Name_3. The names are decoded and cased according to
- -- the current identifier casing mode.
+ -- the Name_Id value stored in Error_Msg_Name_1. A blank precedes the
+ -- name if it is preceded by a non-blank character other than left
+ -- parenthesis. The name is enclosed in quotes unless manual quotation
+ -- mode is set. If the Name_Id is set to No_Name, then no insertion
+ -- occurs; if the Name_Id is set to Error_Name, then the string
+ -- <error> is inserted. A second and third % may appear in a single
+ -- message, similarly replaced by the names which are specified by the
+ -- Name_Id values stored in Error_Msg_Name_2 and Error_Msg_Name_3. The
+ -- names are decoded and cased according to the current identifier
+ -- casing mode.
-- Insertion character $ (Dollar: insert unit name from Names table)
- -- The character $ is treated similarly to %, except that the name
- -- is obtained from the Unit_Name_Type value in Error_Msg_Unit_1
- -- and Error_Msg_Unit_2, as provided by Get_Unit_Name_String in
- -- package Uname. Note that this name includes the postfix (spec)
- -- or (body) strings. If this postfix is not required, use the
- -- normal % insertion for the unit name.
+ -- The character $ is treated similarly to %, except that the name is
+ -- obtained from the Unit_Name_Type value in Error_Msg_Unit_1 and
+ -- Error_Msg_Unit_2, as provided by Get_Unit_Name_String in package
+ -- Uname. Note that this name includes the postfix (spec) or (body)
+ -- strings. If this postfix is not required, use the normal %
+ -- insertion for the unit name.
-- Insertion character { (Left brace: insert literally from names table)
- -- The character { is treated similarly to %, except that the
- -- name is output literally as stored in the names table without
- -- adjusting the casing. This can be used for file names and in
- -- other situations where the name string is to be output unchanged.
+ -- The character { is treated similarly to %, except that the name is
+ -- output literally as stored in the names table without adjusting the
+ -- casing. This can be used for file names and in other situations
+ -- where the name string is to be output unchanged.
-- Insertion character * (Asterisk, insert reserved word name)
- -- The insertion character * is treated exactly like % except that
- -- the resulting name is cased according to the default conventions
- -- for reserved words (see package Scans).
+ -- The insertion character * is treated exactly like % except that the
+ -- resulting name is cased according to the default conventions for
+ -- reserved words (see package Scans).
-- Insertion character & (Ampersand: insert name from node)
-- The insertion character & is treated similarly to %, except that
-- the name is taken from the Chars field of the given node, and may
- -- refer to a child unit name, or a selected component. The casing
- -- is, if possible, taken from the original source reference, which
- -- is obtained from the Sloc field of the given node or nodes. If no
- -- Sloc is available (happens e.g. for nodes in package Standard),
- -- then the default case (see Scans spec) is used. The nodes to be
- -- used are stored in Error_Msg_Node_1, Error_Msg_Node_2. No insertion
- -- occurs for the Empty node, and the Error node results in the
- -- insertion of the characters <error>. In addition, if the special
- -- global variable Error_Msg_Qual_Level is non-zero, then the
- -- reference will include up to the given number of levels of
- -- qualification, using the scope chain.
+ -- refer to a child unit name, or a selected component. The casing is,
+ -- if possible, taken from the original source reference, which is
+ -- obtained from the Sloc field of the given node or nodes. If no Sloc
+ -- is available (happens e.g. for nodes in package Standard), then the
+ -- default case (see Scans spec) is used. The nodes to be used are
+ -- stored in Error_Msg_Node_1, Error_Msg_Node_2. No insertion occurs
+ -- for the Empty node, and the Error node results in the insertion of
+ -- the characters <error>. In addition, if the special global variable
+ -- Error_Msg_Qual_Level is non-zero, then the reference will include
+ -- up to the given number of levels of qualification, using the scope
+ -- chain.
-- Insertion character # (Pound: insert line number reference)
-- The character # is replaced by the string indicating the source
-- for locations in current file: at line nnn:ccc
-- for locations in other files: at filename:nnn:ccc
--
- -- By convention, the # insertion character is only used at the end
- -- of an error message, so the above strings only appear as the last
+ -- By convention, the # insertion character is only used at the end of
+ -- an error message, so the above strings only appear as the last
-- characters of an error message.
-- Insertion character } (Right brace: insert type reference)
-- The character } is replaced by a string describing the type
-- referenced by the entity whose Id is stored in Error_Msg_Node_1.
-- the string gives the name or description of the type, and also
- -- where appropriate the location of its declaration. Special
- -- cases like "some integer type" are handled appropriately. Only
- -- one } is allowed in a message, since there is not enough room
- -- for two (the insertion can be quite long, including a file name)
- -- In addition, if the special global variable Error_Msg_Qual_Level
- -- is non-zero, then the reference will include up to the given
- -- number of levels of qualification, using the scope chain.
+ -- where appropriate the location of its declaration. Special cases
+ -- like "some integer type" are handled appropriately. Only one } is
+ -- allowed in a message, since there is not enough room for two (the
+ -- insertion can be quite long, including a file name) In addition, if
+ -- the special global variable Error_Msg_Qual_Level is non-zero, then
+ -- the reference will include up to the given number of levels of
+ -- qualification, using the scope chain.
-- Insertion character @ (At: insert column number reference)
-- The character @ is replaced by null if the RM_Column_Check mode is
-- off (False). If the switch is on (True), then @ is replaced by the
- -- text string " in column nnn" where nnn is the decimal representation
- -- of the column number stored in Error_Msg_Col plus one (the plus one
- -- is because the number is stored 0-origin and displayed 1-origin).
+ -- text string " in column nnn" where nnn is the decimal
+ -- representation of the column number stored in Error_Msg_Col plus
+ -- one (the plus one is because the number is stored 0-origin and
+ -- displayed 1-origin).
-- Insertion character ^ (Carret: insert integer value)
-- The character ^ is replaced by the decimal conversion of the Uint
-- A second ^ may occur in the message, in which case it is replaced
-- by the decimal conversion of the Uint value in Error_Msg_Uint_2.
+ -- Insertion character > (Right bracket, run time name)
+ -- The character > is replaced by a string of the form (name) if
+ -- Targparm scanned out a Run_Time_Name (see package Targparm for
+ -- details). The name is enclosed in parentheses and output in mixed
+ -- case mode (upper case after any space in the name). If no run time
+ -- name is defined, this insertion character has no effect.
+
-- Insertion character ! (Exclamation: unconditional message)
-- The character ! appearing as the last character of a message makes
-- the message unconditional which means that it is output even if it
-- would normally be suppressed. See section above for a description
- -- of the cases in which messages are normally suppressed.
+ -- of the cases in which messages are normally suppressed. Note that
+ -- warnings are never suppressed, so the use of the ! character in a
+ -- warning message is never useful.
+ --
+ -- Note: the presence of ! is ignored in continuation messages (i.e.
+ -- messages starting with the \ insertion character). The effect of the
+ -- use of ! in a parent message automatically applies to all of its
+ -- continuation messages (since we clearly don't want any case in which
+ -- continuations are separated from the parent message. It is allowable
+ -- to put ! in continuation messages, and the usual style is to include
+ -- it, since it makes it clear that the continuation is part of an
+ -- unconditional message.
-- Insertion character ? (Question: warning message)
-- The character ? appearing anywhere in a message makes the message
- -- a warning instead of a normal error message, and the text of the
- -- message will be preceded by "Warning:" instead of "Error:" The
- -- handling of warnings if further controlled by the Warning_Mode
- -- option (-w switch), see package Opt for further details, and
- -- also by the current setting from pragma Warnings. This pragma
- -- applies only to warnings issued from the semantic phase (not
- -- the parser), but currently all relevant warnings are posted
- -- by the semantic phase anyway. Messages starting with (style)
- -- are also treated as warning messages.
+ -- warning instead of a normal error message, and the text of the
+ -- message will be preceded by "Warning:" instead of "Error:" in the
+ -- normal case. The handling of warnings if further controlled by the
+ -- Warning_Mode option (-w switch), see package Opt for further
+ -- details, and also by the current setting from pragma Warnings. This
+ -- pragma applies only to warnings issued from the semantic phase (not
+ -- the parser), but currently all relevant warnings are posted by the
+ -- semantic phase anyway. Messages starting with (style) are also
+ -- treated as warning messages.
+ --
+ -- Note: the presence of ? is ignored in continuation messages (i.e.
+ -- messages starting with the \ insertion character). The warning
+ -- status of continuations is determined only by the parent message
+ -- which is being continued. It is allowable to put ? in continuation
+ -- messages, and the usual style is to include it, since it makes it
+ -- clear that the continuation is part of a warning message.
+
+ -- Insertion character < (Less Than: conditional warning message)
+ -- The character < appearing anywhere in a message is used for a
+ -- conditional error message. If Error_Msg_Warn is True, then the
+ -- effect is the same as ? described above. If Error_Msg_Warn is
+ -- False, then there is no effect.
-- Insertion character A-Z (Upper case letter: Ada reserved word)
-- If two or more upper case letters appear in the message, they are
-- quotes are added unless manual quotation mode is currently set.
-- Insertion character ` (Backquote: set manual quotation mode)
- -- The backquote character always appears in pairs. Each backquote
- -- of the pair is replaced by a double quote character. In addition,
- -- Any reserved keywords, or name insertions between these backquotes
- -- are not surrounded by the usual automatic double quotes. See the
+ -- The backquote character always appears in pairs. Each backquote of
+ -- the pair is replaced by a double quote character. In addition, any
+ -- reserved keywords, or name insertions between these backquotes are
+ -- not surrounded by the usual automatic double quotes. See the
-- section below on manual quotation mode for further details.
-- Insertion character ' (Quote: literal character)
-- Precedes a character which is placed literally into the message.
-- Used to insert characters into messages that are one of the
- -- insertion characters defined here.
+ -- insertion characters defined here. Also useful in inserting
+ -- sequences of upper case letters (e.g. RM) which are not to be
+ -- treated as keywords.
-- Insertion character \ (Backslash: continuation message)
-- Indicates that the message is a continuation of a message
- -- previously posted. This is used to ensure that such groups
- -- of messages are treated as a unit. The \ character must be
- -- the first character of the message text.
+ -- previously posted. This is used to ensure that such groups of
+ -- messages are treated as a unit. The \ character must be the first
+ -- character of the message text.
- -- Insertion character | (vertical bar, non-serious error)
+ -- Insertion character \\ (Two backslashes, continuation with new line)
+ -- This differs from \ only in -gnatjnn mode (Error_Message_Line_Length
+ -- set non-zero). This sequence forces a new line to start even when
+ -- continuations are being gathered into a single message.
+
+ -- Insertion character | (Vertical bar: non-serious error)
-- By default, error messages (other than warning messages) are
- -- considered to be fatal error messages which prevent expansion
- -- or generation of code in the presence of the -gnatQ switch.
- -- If the insertion character | appears, the message is considered
- -- to be non-serious, and does not cause Serious_Errors_Detected
- -- to be incremented (so expansion is not prevented by such a msg).
+ -- considered to be fatal error messages which prevent expansion or
+ -- generation of code in the presence of the -gnatQ switch. If the
+ -- insertion character | appears, the message is considered to be
+ -- non-serious, and does not cause Serious_Errors_Detected to be
+ -- incremented (so expansion is not prevented by such a msg).
+
+ -- Insertion character ~ (Tilde: insert string)
+ -- Indicates that Error_Msg_String (1 .. Error_Msg_Strlen) is to be
+ -- inserted to replace the ~ character. The string is inserted in the
+ -- literal form it appears, without any action on special characters.
+
+ ----------------------------------------
+ -- Specialization of Messages for VMS --
+ ----------------------------------------
+
+ -- Some messages mention gcc-style switch names. When using an OpenVMS
+ -- host, such switch names must be converted to their corresponding VMS
+ -- qualifer. The following table controls this translation. In each case
+ -- the original message must contain the string "-xxx switch", where xxx
+ -- is the Gname? entry from below, and this string will be replaced by
+ -- "/yyy qualifier", where yyy is the corresponding Vname? entry.
+
+ Gname1 : aliased constant String := "fno-strict-aliasing";
+ Vname1 : aliased constant String := "OPTIMIZE=NO_STRICT_ALIASING";
+
+ Gname2 : aliased constant String := "gnatX";
+ Vname2 : aliased constant String := "EXTENSIONS_ALLOWED";
+
+ Gname3 : aliased constant String := "gnatW";
+ Vname3 : aliased constant String := "WIDE_CHARACTER_ENCODING";
+
+ Gname4 : aliased constant String := "gnatf";
+ Vname4 : aliased constant String := "REPORT_ERRORS=FULL";
+
+ Gname5 : aliased constant String := "gnat05";
+ Vname5 : aliased constant String := "05";
+
+ type Cstring_Ptr is access constant String;
+
+ Gnames : array (Nat range <>) of Cstring_Ptr :=
+ (Gname1'Access,
+ Gname2'Access,
+ Gname3'Access,
+ Gname4'Access,
+ Gname5'Access);
+
+ Vnames : array (Nat range <>) of Cstring_Ptr :=
+ (Vname1'Access,
+ Vname2'Access,
+ Vname3'Access,
+ Vname4'Access,
+ Vname5'Access);
-----------------------------------------------------
-- Global Values Used for Error Message Insertions --
-- passed to the error message routine for insertion sequences described
-- above. The reason these are passed globally is that the insertion
-- mechanism is essentially an untyped one in which the appropriate
- -- variables are set dependingon the specific insertion characters used.
+ -- variables are set depending on the specific insertion characters used.
+
+ -- Note that is mandatory that the caller ensure that global variables
+ -- are set before the Error_Msg call, otherwise the result is undefined.
- Error_Msg_Col : Column_Number;
+ Error_Msg_Col : Column_Number renames Err_Vars.Error_Msg_Col;
-- Column for @ insertion character in message
- Error_Msg_Uint_1 : Uint;
- Error_Msg_Uint_2 : Uint;
+ Error_Msg_Uint_1 : Uint renames Err_Vars.Error_Msg_Uint_1;
+ Error_Msg_Uint_2 : Uint renames Err_Vars.Error_Msg_Uint_2;
-- Uint values for ^ insertion characters in message
- Error_Msg_Sloc : Source_Ptr;
+ Error_Msg_Sloc : Source_Ptr renames Err_Vars.Error_Msg_Sloc;
-- Source location for # insertion character in message
- Error_Msg_Name_1 : Name_Id;
- Error_Msg_Name_2 : Name_Id;
- Error_Msg_Name_3 : Name_Id;
+ Error_Msg_Name_1 : Name_Id renames Err_Vars.Error_Msg_Name_1;
+ Error_Msg_Name_2 : Name_Id renames Err_Vars.Error_Msg_Name_2;
+ Error_Msg_Name_3 : Name_Id renames Err_Vars.Error_Msg_Name_3;
-- Name_Id values for % insertion characters in message
- Error_Msg_Unit_1 : Name_Id;
- Error_Msg_Unit_2 : Name_Id;
+ Error_Msg_Unit_1 : Name_Id renames Err_Vars.Error_Msg_Unit_1;
+ Error_Msg_Unit_2 : Name_Id renames Err_Vars.Error_Msg_Unit_2;
-- Name_Id values for $ insertion characters in message
- Error_Msg_Node_1 : Node_Id;
- Error_Msg_Node_2 : Node_Id;
+ Error_Msg_Node_1 : Node_Id renames Err_Vars.Error_Msg_Node_1;
+ Error_Msg_Node_2 : Node_Id renames Err_Vars.Error_Msg_Node_2;
-- Node_Id values for & insertion characters in message
- Error_Msg_Qual_Level : Int := 0;
+ Error_Msg_Qual_Level : Int renames Err_Vars.Error_Msg_Qual_Level;
-- Number of levels of qualification required for type name (see the
-- description of the } insertion character. Note that this value does
-- note get reset by any Error_Msg call, so the caller is responsible
-- for resetting it.
- Warn_On_Instance : Boolean := False;
- -- Normally if a warning is generated in a generic template from the
- -- analysis of the template, then the warning really belongs in the
- -- template, and the default value of False for this Boolean achieves
- -- that effect. If Warn_On_Instance is set True, then the warnings are
- -- generated on the instantiation (referring to the template) rather
- -- than on the template itself.
+ Error_Msg_Warn : Boolean renames Err_Vars.Error_Msg_Warn;
+ -- Used if current message contains a < insertion character to indicate
+ -- if the current message is a warning message.
+
+ Error_Msg_String : String renames Err_Vars.Error_Msg_String;
+ Error_Msg_Strlen : Natural renames Err_Vars.Error_Msg_Strlen;
+ -- Used if current message contains a ~ insertion character to indicate
+ -- insertion of the string Error_Msg_String (1 .. Error_Msg_Strlen).
-----------------------------------------------------
-- Format of Messages and Manual Quotation Control --
-- Message ID Definitions --
----------------------------
- type Error_Msg_Id is new Int;
+ subtype Error_Msg_Id is Erroutc.Error_Msg_Id;
+ function "=" (Left, Right : Error_Msg_Id) return Boolean
+ renames Erroutc."=";
-- A type used to represent specific error messages. Used by the clients
-- of this package only in the context of the Get_Error_Id and
-- Change_Error_Text subprograms.
- No_Error_Msg : constant Error_Msg_Id := 0;
+ No_Error_Msg : constant Error_Msg_Id := Erroutc.No_Error_Msg;
-- A constant which is different from any value returned by Get_Error_Id.
-- Typically used by a client to indicate absense of a saved Id value.
- function Get_Msg_Id return Error_Msg_Id;
+ function Get_Msg_Id return Error_Msg_Id renames Erroutc.Get_Msg_Id;
-- Returns the Id of the message most recently posted using one of the
-- Error_Msg routines.
- function Get_Location (E : Error_Msg_Id) return Source_Ptr;
- -- Returns the flag location of the error message with the given id E.
+ function Get_Location (E : Error_Msg_Id) return Source_Ptr
+ renames Erroutc.Get_Location;
+ -- Returns the flag location of the error message with the given id E
------------------------
-- List Pragmas Table --
Ploc : Source_Ptr;
end record;
- -- Note: Ploc points to the terminating semicolon in the List_Off and
- -- Page cases, and to the pragma keyword for List_On. In the case of
- -- a pragma List_Off, a List_On entry is also made in the table,
- -- pointing to the pragma keyword. This ensures that, as required,
- -- a List (Off) pragma is listed even in list off mode.
+ -- Note: Ploc points to the terminating semicolon in the List_Off and Page
+ -- cases, and to the pragma keyword for List_On. In the case of a pragma
+ -- List_Off, a List_On entry is also made in the table, pointing to the
+ -- pragma keyword. This ensures that, as required, a List (Off) pragma is
+ -- listed even in list off mode.
package List_Pragmas is new Table.Table (
Table_Component_Type => List_Pragma_Record,
procedure Error_Msg_N (Msg : String; N : Node_Or_Entity_Id);
-- Output a message at the Sloc of the given node. This routine can be
- -- called from the parser or the semantic analyzer, although the call
- -- from the latter is much more common (and is the most usual way of
- -- generating error messages from the analyzer). The message text may
- -- contain a single & insertion, which will reference the given node.
- -- The message is suppressed if the node N already has a message posted,
- -- or if it is a warning and warnings and N is an entity node for which
- -- warnings are suppressed.
+ -- called from the parser or the semantic analyzer, although the call from
+ -- the latter is much more common (and is the most usual way of generating
+ -- error messages from the analyzer). The message text may contain a
+ -- single & insertion, which will reference the given node. The message is
+ -- suppressed if the node N already has a message posted, or if it is a
+ -- warning and warnings and N is an entity node for which warnings are
+ -- suppressed.
+
+ procedure Error_Msg_F (Msg : String; N : Node_Id);
+ -- Similar to Error_Msg_N except that the message is placed on the
+ -- first node of the construct N (First_Node (N)).
procedure Error_Msg_NE
(Msg : String;
E : Node_Or_Entity_Id);
-- Output a message at the Sloc of the given node N, with an insertion of
-- the name from the given entity node E. This is used by the semantic
- -- routines, where this is a common error message situation. The Msg
- -- text will contain a & or } as usual to mark the insertion point.
- -- This routine can be called from the parser or the analyzer.
+ -- routines, where this is a common error message situation. The Msg text
+ -- will contain a & or } as usual to mark the insertion point. This
+ -- routine can be called from the parser or the analyzer.
+
+ procedure Error_Msg_FE
+ (Msg : String;
+ N : Node_Id;
+ E : Node_Or_Entity_Id);
+ -- Same as Error_Msg_NE, except that the message is placed on the first
+ -- node of the construct N (First_Node (N)).
procedure Error_Msg_NEL
(Msg : String;
-- Exactly the same as Error_Msg_NE, except that the flag is placed at
-- the specified Flag_Location instead of at Sloc (N).
+ procedure Error_Msg_NW
+ (Eflag : Boolean;
+ Msg : String;
+ N : Node_Or_Entity_Id);
+ -- This routine is used for posting a message conditionally. The message
+ -- is posted (with the same effect as Error_Msg_N (Msg, N) if and only
+ -- if Eflag is True and if the node N is within the main extended source
+ -- unit and comes from source. Typically this is a warning mode flag.
+
procedure Change_Error_Text (Error_Id : Error_Msg_Id; New_Msg : String);
-- The error message text of the message identified by Id is replaced by
-- the given text. This text may contain insertion characters in the
-- usual manner, and need not be the same length as the original text.
- procedure Purge_Messages (From : Source_Ptr; To : Source_Ptr);
+ function First_Node (C : Node_Id) return Node_Id;
+ -- Given a construct C, finds the first node in the construct, i.e. the
+ -- one with the lowest Sloc value. This is useful in placing error msgs.
+
+ function First_Sloc (N : Node_Id) return Source_Ptr;
+ -- Given the node for an expression, return a source pointer value that
+ -- points to the start of the first token in the expression. In the case
+ -- where the expression is parenthesized, an attempt is made to include
+ -- the parentheses (i.e. to return the location of the initial paren).
+
+ procedure Purge_Messages (From : Source_Ptr; To : Source_Ptr)
+ renames Erroutc.Purge_Messages;
-- All error messages whose location is in the range From .. To (not
-- including the end points) will be deleted from the error listing.
-- Remove any warning messages corresponding to the Sloc of N or any
-- of its descendent nodes. No effect if no such warnings.
- procedure Set_Warnings_Mode_Off (Loc : Source_Ptr);
+ procedure Remove_Warning_Messages (L : List_Id);
+ -- Remove warnings on all elements of a list
+
+ procedure Set_Ignore_Errors (To : Boolean);
+ -- Following a call to this procedure with To=True, all error calls are
+ -- ignored. A call with To=False restores the default treatment in which
+ -- error calls are treated as usual (and as described in this spec).
+
+ procedure Set_Warnings_Mode_Off (Loc : Source_Ptr)
+ renames Erroutc.Set_Warnings_Mode_Off;
-- Called in response to a pragma Warnings (Off) to record the source
-- location from which warnings are to be turned off.
- procedure Set_Warnings_Mode_On (Loc : Source_Ptr);
+ procedure Set_Warnings_Mode_On (Loc : Source_Ptr)
+ renames Erroutc.Set_Warnings_Mode_On;
-- Called in response to a pragma Warnings (On) to record the source
-- location from which warnings are to be turned back on.
- function Compilation_Errors return Boolean;
+ procedure Set_Specific_Warning_Off (Loc : Source_Ptr; Msg : String)
+ renames Erroutc.Set_Specific_Warning_Off;
+ -- This is called in response to the two argument form of pragma Warnings
+ -- where the first argument is OFF, and the second argument is the prefix
+ -- of a specific warning to be suppressed. The first argument is the start
+ -- of the suppression range, and the second argument is the string from
+ -- the pragma.
+
+ procedure Set_Specific_Warning_On
+ (Loc : Source_Ptr;
+ Msg : String;
+ Err : out Boolean)
+ renames Erroutc.Set_Specific_Warning_On;
+ -- This is called in response to the two argument form of pragma Warnings
+ -- where the first argument is ON, and the second argument is the prefix
+ -- of a specific warning to be suppressed. The first argument is the end
+ -- of the suppression range, and the second argument is the string from
+ -- the pragma. Err is set to True on return to report the error of no
+ -- matching Warnings Off pragma preceding this one.
+
+ function Compilation_Errors return Boolean
+ renames Erroutc.Compilation_Errors;
-- Returns true if errors have been detected, or warnings in -gnatwe
-- (treat warnings as errors) mode.
- procedure dmsg (Id : Error_Msg_Id);
+ procedure Error_Msg_CRT (Feature : String; N : Node_Id);
+ -- Posts a non-fatal message on node N saying that the feature identified
+ -- by the Feature argument is not supported in either configurable
+ -- run-time mode or no run-time mode (as appropriate). In the former case,
+ -- the name of the library is output if available.
+
+ procedure dmsg (Id : Error_Msg_Id) renames Erroutc.dmsg;
-- Debugging routine to dump an error message
+ ------------------------------------
+ -- Utility Interface for Back End --
+ ------------------------------------
+
+ -- The following subprograms can be used by the back end for the purposes
+ -- of concocting error messages that are not output via Errout, e.g. the
+ -- messages generated by the gcc back end.
+
+ procedure Set_Identifier_Casing
+ (Identifier_Name : System.Address;
+ File_Name : System.Address);
+ -- The identifier is a null terminated string that represents the name of
+ -- an identifier appearing in the source program. File_Name is a null
+ -- terminated string giving the corresponding file name for the identifier
+ -- as obtained from the front end by the use of Full_Debug_Name to the
+ -- source file referenced by the corresponding source location value. On
+ -- return, the name is in Name_Buffer, null terminated with Name_Len set.
+ -- This name is the identifier name as passed, cased according to the
+ -- default identifier casing for the given file.
+
end Errout;
OSDN Git Service
