-- --
-- S p e c --
-- --
--- Copyright (C) 1992-2006, Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2007, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
with Err_Vars;
with Erroutc;
+with Namet; use Namet;
with Table;
-with Types; use Types;
-with Uintp; use Uintp;
+with Types; use Types;
+with Uintp; use Uintp;
with System;
-- message, similarly replaced by the names which are specified by the
-- Name_Id values stored in Error_Msg_Name_2 and Error_Msg_Name_3. The
-- names are decoded and cased according to the current identifier
- -- casing mode.
+ -- casing mode. Note: if a unit name ending with %b or %s is passed
+ -- for this kind of insertion, this suffix is simply stripped. Use a
+ -- unit name insertion ($) to process the suffix.
+
+ -- Insertion character %% (Double percent: insert literal name)
+ -- The character sequence %% acts as described above for %, except
+ -- that the name is simply obtained with Get_Name_String and is not
+ -- decoded or cased, it is inserted literally from the names table.
+ -- A trailing %b or %s is not treated specially.
-- Insertion character $ (Dollar: insert unit name from Names table)
-- The character $ is treated similarly to %, except that the name is
-- strings. If this postfix is not required, use the normal %
-- insertion for the unit name.
- -- Insertion character { (Left brace: insert literally from names table)
- -- The character { is treated similarly to %, except that the name is
- -- output literally as stored in the names table without adjusting the
- -- casing. This can be used for file names and in other situations
- -- where the name string is to be output unchanged.
+ -- Insertion character { (Left brace: insert file name from names table)
+ -- The character { is treated similarly to %, except that the input
+ -- value is a File_Name_Type value stored in Error_Msg_File_1 or
+ -- Error_Msg_File_2 or Error_Msg_File_3. The value is output literally,
+ -- enclosed in quotes as for %, but the case is not modified, the
+ -- insertion is the exact string stored in the names table without
+ -- adjusting the casing.
-- Insertion character * (Asterisk, insert reserved word name)
-- The insertion character * is treated exactly like % except that the
--
-- By convention, the # insertion character is only used at the end of
-- an error message, so the above strings only appear as the last
- -- characters of an error message.
+ -- characters of an error message. The only exceptions to this rule
+ -- are that an RM reference may follow in the form (RM .....) and a
+ -- right parenthesis may immediately follow the #. In the case of
+ -- continued messages, # can only appear at the end of a group of
+ -- continuation messsages, except that \\ messages which always start
+ -- a new line end the sequence from the point of view of this rule.
+ -- The idea is that for any use of -gnatj, it will still be the case
+ -- that a location reference appears only at the end of a line.
-- Insertion character } (Right brace: insert type reference)
-- The character } is replaced by a string describing the type
-- the message unconditional which means that it is output even if it
-- would normally be suppressed. See section above for a description
-- of the cases in which messages are normally suppressed. Note that
- -- warnings are never suppressed, so the use of the ! character in a
- -- warning message is never useful.
+ -- in the case of warnings, the meaning is that the warning should not
+ -- be removed in dead code (that's the only time that the use of !
+ -- has any effect for a warning).
+ --
+ -- Note: the presence of ! is ignored in continuation messages (i.e.
+ -- messages starting with the \ insertion character). The effect of the
+ -- use of ! in a parent message automatically applies to all of its
+ -- continuation messages (since we clearly don't want any case in which
+ -- continuations are separated from the parent message. It is allowable
+ -- to put ! in continuation messages, and the usual style is to include
+ -- it, since it makes it clear that the continuation is part of an
+ -- unconditional message.
-- Insertion character ? (Question: warning message)
- -- The character ? appearing anywhere in a message makes the message a
+ -- The character ? appearing anywhere in a message makes the message
-- warning instead of a normal error message, and the text of the
-- message will be preceded by "Warning:" instead of "Error:" in the
-- normal case. The handling of warnings if further controlled by the
-- the parser), but currently all relevant warnings are posted by the
-- semantic phase anyway. Messages starting with (style) are also
-- treated as warning messages.
+ --
+ -- Note: the presence of ? is ignored in continuation messages (i.e.
+ -- messages starting with the \ insertion character). The warning
+ -- status of continuations is determined only by the parent message
+ -- which is being continued. It is allowable to put ? in continuation
+ -- messages, and the usual style is to include it, since it makes it
+ -- clear that the continuation is part of a warning message.
-- Insertion character < (Less Than: conditional warning message)
-- The character < appearing anywhere in a message is used for a
-- Insertion character ` (Backquote: set manual quotation mode)
-- The backquote character always appears in pairs. Each backquote of
- -- the pair is replaced by a double quote character. In addition, Any
+ -- the pair is replaced by a double quote character. In addition, any
-- reserved keywords, or name insertions between these backquotes are
-- not surrounded by the usual automatic double quotes. See the
-- section below on manual quotation mode for further details.
-- messages are treated as a unit. The \ character must be the first
-- character of the message text.
- -- Insertion character | (vertical bar, non-serious error)
+ -- Insertion character \\ (Two backslashes, continuation with new line)
+ -- This differs from \ only in -gnatjnn mode (Error_Message_Line_Length
+ -- set non-zero). This sequence forces a new line to start even when
+ -- continuations are being gathered into a single message.
+
+ -- Insertion character | (Vertical bar: non-serious error)
-- By default, error messages (other than warning messages) are
-- considered to be fatal error messages which prevent expansion or
-- generation of code in the presence of the -gnatQ switch. If the
-- non-serious, and does not cause Serious_Errors_Detected to be
-- incremented (so expansion is not prevented by such a msg).
+ -- Insertion character ~ (Tilde: insert string)
+ -- Indicates that Error_Msg_String (1 .. Error_Msg_Strlen) is to be
+ -- inserted to replace the ~ character. The string is inserted in the
+ -- literal form it appears, without any action on special characters.
+
----------------------------------------
-- Specialization of Messages for VMS --
----------------------------------------
Error_Msg_Name_3 : Name_Id renames Err_Vars.Error_Msg_Name_3;
-- Name_Id values for % insertion characters in message
- Error_Msg_Unit_1 : Name_Id renames Err_Vars.Error_Msg_Unit_1;
- Error_Msg_Unit_2 : Name_Id renames Err_Vars.Error_Msg_Unit_2;
- -- Name_Id values for $ insertion characters in message
+ Error_Msg_File_1 : File_Name_Type renames Err_Vars.Error_Msg_File_1;
+ Error_Msg_File_2 : File_Name_Type renames Err_Vars.Error_Msg_File_2;
+ Error_Msg_File_3 : File_Name_Type renames Err_Vars.Error_Msg_File_3;
+ -- File_Name_Type values for { insertion characters in message
+
+ Error_Msg_Unit_1 : Unit_Name_Type renames Err_Vars.Error_Msg_Unit_1;
+ Error_Msg_Unit_2 : Unit_Name_Type renames Err_Vars.Error_Msg_Unit_2;
+ -- Unit_Name_Type values for $ insertion characters in message
Error_Msg_Node_1 : Node_Id renames Err_Vars.Error_Msg_Node_1;
Error_Msg_Node_2 : Node_Id renames Err_Vars.Error_Msg_Node_2;
-- Used if current message contains a < insertion character to indicate
-- if the current message is a warning message.
+ Error_Msg_String : String renames Err_Vars.Error_Msg_String;
+ Error_Msg_Strlen : Natural renames Err_Vars.Error_Msg_Strlen;
+ -- Used if current message contains a ~ insertion character to indicate
+ -- insertion of the string Error_Msg_String (1 .. Error_Msg_Strlen).
+
-----------------------------------------------------
-- Format of Messages and Manual Quotation Control --
-----------------------------------------------------
-- used for keywords (actually the first compilation unit keyword) in the
-- source file.
+ -- Note: a special exception is that RM is never treated as a keyword
+ -- but instead is copied literally into the message, this avoids the
+ -- need for writing 'R'M for all reference manual quotes.
+
-- In the case of names, the default mode for the error text processor
-- is to surround the name by quotation marks automatically. The case
-- used for the identifier names is taken from the source program where
-- Initializes for output of error messages. Must be called for each
-- source file before using any of the other routines in the package.
- procedure Finalize;
- -- Finalize processing of error messages for one file and output message
- -- indicating the number of detected errors.
+ procedure Finalize (Last_Call : Boolean);
+ -- Finalize processing of error message list. Includes processing for
+ -- duplicated error messages, and other similar final adjustment of the
+ -- list of error messages. Note that this procedure must be called before
+ -- calling Compilation_Errors to determine if there were any errors. It
+ -- is perfectly fine to call Finalize more than once, providing that the
+ -- parameter Last_Call is set False for every call except the last call.
+
+ -- This multiple call capability is used to do some processing that may
+ -- generate messages. Call Finalize to eliminate duplicates and remove
+ -- deleted warnings. Test for compilation errors using Compilation_Errors,
+ -- then generate some more errors/warnings, call Finalize again to make
+ -- sure that all duplicates in these new messages are dealt with, then
+ -- finally call Output_Messages to output the final list of messages. The
+ -- argument Last_Call must be set False on all calls except the last call,
+ -- and must be set True on the last call (a value of True activates some
+ -- processing that must only be done after all messages are posted).
+
+ procedure Output_Messages;
+ -- Output list of messages, including messages giving number of detected
+ -- errors and warnings.
procedure Error_Msg (Msg : String; Flag_Location : Source_Ptr);
-- Output a message at specified location. Can be called from the parser
procedure Remove_Warning_Messages (N : Node_Id);
-- Remove any warning messages corresponding to the Sloc of N or any
- -- of its descendent nodes. No effect if no such warnings.
+ -- of its descendent nodes. No effect if no such warnings. Note that
+ -- style messages (identified by the fact that they start with "(style)"
+ -- are not removed by this call. Basically the idea behind this procedure
+ -- is to remove warnings about execution conditions from known dead code.
procedure Remove_Warning_Messages (L : List_Id);
- -- Remove warnings on all elements of a list
+ -- Remove warnings on all elements of a list (Calls Remove_Warning_Messages
+ -- on each element of the list, see above).
procedure Set_Ignore_Errors (To : Boolean);
-- Following a call to this procedure with To=True, all error calls are
-- Called in response to a pragma Warnings (On) to record the source
-- location from which warnings are to be turned back on.
- function Compilation_Errors return Boolean
- renames Erroutc.Compilation_Errors;
+ procedure Set_Specific_Warning_Off
+ (Loc : Source_Ptr;
+ Msg : String;
+ Config : Boolean)
+ renames Erroutc.Set_Specific_Warning_Off;
+ -- This is called in response to the two argument form of pragma Warnings
+ -- where the first argument is OFF, and the second argument is the prefix
+ -- of a specific warning to be suppressed. The first argument is the start
+ -- of the suppression range, and the second argument is the string from
+ -- the pragma.
+
+ procedure Set_Specific_Warning_On
+ (Loc : Source_Ptr;
+ Msg : String;
+ Err : out Boolean)
+ renames Erroutc.Set_Specific_Warning_On;
+ -- This is called in response to the two argument form of pragma Warnings
+ -- where the first argument is ON, and the second argument is the prefix
+ -- of a specific warning to be suppressed. The first argument is the end
+ -- of the suppression range, and the second argument is the string from
+ -- the pragma. Err is set to True on return to report the error of no
+ -- matching Warnings Off pragma preceding this one.
+
+ function Compilation_Errors return Boolean;
-- Returns true if errors have been detected, or warnings in -gnatwe
- -- (treat warnings as errors) mode.
+ -- (treat warnings as errors) mode. Note that it is mandatory to call
+ -- Finalize before calling this routine.
procedure Error_Msg_CRT (Feature : String; N : Node_Id);
-- Posts a non-fatal message on node N saying that the feature identified
OSDN Git Service
