# Makefile for GNU C compiler.
-# Copyright (C) 1987, 88, 90-96, 1997 Free Software Foundation, Inc.
+# Copyright (C) 1987, 88, 90-97, 1998 Free Software Foundation, Inc.
#This file is part of GNU CC.
# Selection of languages to be made.
# This is overridden by configure.
-LANGUAGES = c proto gcov @all_languages@
+LANGUAGES = c proto gcov$(exeext) @all_languages@
# Selection of languages to be made during stage1 build.
# This is overridden by configure.
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
+# WARN_CFLAGS are the warning flags to pass to stage2 and stage3. It is
+# separate from BOOT_CFLAGS because people tend to override optimization
+# flags and we'd like them to still have warnings turned on. They are free
+# to explicitly turn warnings off if they wish.
# XCFLAGS is used for most compilations but not when using the GCC just built.
# TCFLAGS is used for compilations with the GCC just built.
XCFLAGS =
TCFLAGS =
CFLAGS = -g
-BOOT_CFLAGS = -O $(CFLAGS)
+BOOT_CFLAGS = -O2 $(CFLAGS)
+WARN_CFLAGS = -W -Wall
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =
T_CPPFLAGS =
CC = @CC@
-BISON = bison
+# srcdir might be a relative pathname which won't be valid in a subdirectory,
+# so we must use objdir/srcdir instead to make it safe. objdir is always
+# a full pathname.
+BISON = `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
+ /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
+ *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
+ esac else echo bison ; fi`
BISONFLAGS =
-LEX = flex
+LEX = `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
LEXFLAGS =
AR = ar
AR_FLAGS = rc
+LN = @symbolic_link@
DLLTOOL = dlltool
SHELL = /bin/sh
# on sysV, define this as cp.
$(srcdir)/ginclude/va-m32r.h $(srcdir)/ginclude/va-sh.h \
$(srcdir)/ginclude/va-v850.h $(srcdir)/ginclude/va-arc.h \
$(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \
- $(srcdir)/ginclude/proto.h $(EXTRA_HEADERS) \
- $(LANG_EXTRA_HEADERS)
+ $(EXTRA_HEADERS) $(LANG_EXTRA_HEADERS) \
+ $(srcdir)/ginclude/proto.h $(srcdir)/ginclude/stdbool.h
# Target to use whe installing assert.h. Some systems may
# want to set this empty.
# It also specifies -I./include to find, e.g., stddef.h.
GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS)
-# Special flags for compiling enquire.
-# We disable optimization to make floating point more reliable.
-ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
-ENQUIRE_LDFLAGS = $(LDFLAGS)
-
# Sed command to transform gcc to installed name. Overwritten by configure.
-program_transform_name = -e s,x,x,
-program_transform_cross_name = -e s,^,$(target_alias)-,
+program_transform_name = @program_transform_name@
+program_transform_cross_name = s,^,$(target_alias)-,
+
+build_canonical = @build_canonical@
+host_canonical = @host_canonical@
# Tools to use when building a cross-compiler.
# These are used because `configure' appends `cross-make'
# to the makefile when making a cross-compiler.
-TARGET_TOOLPREFIX = $(tooldir)/bin/
-AR_FOR_TARGET = $(TARGET_TOOLPREFIX)ar
+# Use the tools from the build tree, if they are available.
+
+# objdir is set by configure.
+objdir = @objdir@
+
+AR_FOR_TARGET = ` \
+ if [ -f $(objdir)/../binutils/ar ] ; then \
+ echo $(objdir)/../binutils/ar ; \
+ else \
+ if [ "$(host_canonical)" = "$(target)" ] ; then \
+ echo ar; \
+ else \
+ t='$(program_transform_name)'; echo ar | sed -e $$t ; \
+ fi; \
+ fi`
AR_FOR_TARGET_FLAGS = rc
-RANLIB_FOR_TARGET = $(TARGET_TOOLPREFIX)ranlib
-RANLIB_TEST_FOR_TARGET = [ -f $(TARGET_TOOLPREFIX)ranlib ]
-
+RANLIB_FOR_TARGET = ` \
+ if [ -f $(objdir)/../binutils/ranlib ] ; then \
+ echo $(objdir)/../binutils/ranlib ; \
+ else \
+ if [ "$(host_canonical)" = "$(target)" ] ; then \
+ echo ranlib; \
+ else \
+ t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
+ fi; \
+ fi`
+RANLIB_TEST_FOR_TARGET = \
+ [ -f $(RANLIB_FOR_TARGET) ] \
+ || ( [ "$(host_canonical)" = "$(target)" ] \
+ && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] )
+
+# We always act like a cross-compiler, even when we're
+# compiling native. This is because we want to use our own tools if
+# we can. We don't just set RANLIB to a complicated expression,
+# because the top level Makefile.in might override RANLIB_FOR_TARGET.
+# These are from the FSF file "cross-make".
+AR = $(AR_FOR_TARGET)
+AR_FLAGS = $(AR_FOR_TARGET_FLAGS)
+OLDAR = $(AR_FOR_TARGET)
+OLDAR_FLAGS = $(AR_FOR_TARGET_FLAGS)
+RANLIB = $(RANLIB_FOR_TARGET)
+RANLIB_TEST = $(RANLIB_TEST_FOR_TARGET)
+
# Dir to search for system headers. Overridden by cross-make.
SYSTEM_HEADER_DIR = /usr/include
lang_specs_files=@lang_specs_files@
lang_options_files=@lang_options_files@
GCC_THREAD_FILE=@thread_file@
+GTHREAD_FLAGS=@gthread_flags@
version=@version@
mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
# Directory in which the compiler finds g++ includes.
gxx_include_dir= @gxx_include_dir@
# Directory in which the old g++ header files may be found.
+# The reason we use $(libdir)/g++-include rather than using libsubdir
+# is for compatibility with older versions of libg++.
old_gxx_include_dir= $(libdir)/g++-include
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
# Extension (if any) to put in installed man-page filename.
manext = .1
objext = .o
-exeext = @build_exeext@
+exeext = @host_exeext@
+build_exeext = @build_exeext@
# Directory in which to put man pages.
mandir = @mandir@/man1
# system library.
OBSTACK=obstack.o
+# Configure will set these if you need vfprintf and possibly _doprnt support.
+VFPRINTF=@vfprintf@
+DOPRINT=@doprint@
+
# Specify the rule for actually making libgcc.a,
LIBGCC = libgcc.a
# and the rule for installing it.
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
# so that -g1 will be tested.
+#
+# -fexceptions is necessary for eh.o now that the exceptions are
+# the default for g++ only.
LIBGCC2_DEBUG_CFLAGS = -g1
-LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED
+LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -fexceptions @inhibit_libc@
# Additional options to use when compiling libgcc2.a.
# Some targets override this to -Iinclude
# Some targets override this to stmp-int-hdrs
LIBGCC2_DEPS =
-# Enquire target (This is a variable so that a target can choose not to
-# build it.)
-ENQUIRE = enquire
-
# libgcc1-test target (must also be overridable for a target)
LIBGCC1_TEST = libgcc1-test
# Often this is edited directly by `configure'.
EXTRA_HEADERS =@extra_headers_list@
-# Set this to `ld' to enable use of collect2.
+# Set this to `collect2' to enable use of collect2.
USE_COLLECT2 = @will_use_collect2@
MAYBE_USE_COLLECT2 = @maybe_use_collect2@
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.
-USE_COLLECT2 = ld
+USE_COLLECT2 = collect2$(exeext)
# List of extra C and assembler files to add to libgcc1.a.
# Assembler files should have names ending in `.asm'.
LIB2FUNCS_EXTRA =
# Default float.h source to use for cross-compiler.
-# This is overidden by configure.
+# This is overridden by configure.
CROSS_FLOAT_H=$(srcdir)/config/float-@float_format@.h
+# We do not try to build float.h anymore. Let configure select the
+# appropriate pre-built float.h file for the target.
+FLOAT_H=$(srcdir)/config/float-@float_format@.h
+
# Program to convert libraries.
LIBCONVERT =
# List of things which should already be built whenever we try to use xgcc
# to compile anything (without linking).
-GCC_PASSES=xgcc cc1 cpp $(EXTRA_PASSES)
+GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES)
# List of things which should already be built whenever we try to use xgcc
# to link anything.
HOST_ALLOCA=$(ALLOCA)
HOST_MALLOC=$(MALLOC)
HOST_OBSTACK=$(OBSTACK)
+HOST_VFPRINTF=$(VFPRINTF)
+HOST_DOPRINT=$(DOPRINT)
# Actual name to use when installing a native compiler.
-GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed $$t`
+GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed -e $$t`
# Actual name to use when installing a cross-compiler.
-GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed $$t`
+GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
# Choose the real default target.
ALL=all.internal
# Choose the real install target.
INSTALL_TARGET=install-normal
-# Source for float.h. Overridden by cross-make.
-FLOAT_H=float.h-nat
-
# Setup the testing framework, if you have one
EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \
echo $${rootme}/../expect/expect ; \
# Extra flags to use when compiling [m]crt0.o.
CRT0STUFF_T_CFLAGS =
+# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
+T =
+
# End of variables for you to override.
# Definition of `all' is here so that new rules inserted by sed
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
# Even if ALLOCA is set, don't use it if compiling with GCC.
-USE_ALLOCA= ` case "${CC}" in "${OLDCC}") echo "${ALLOCA}" ;; esac `
-USE_HOST_ALLOCA= ` case "${HOST_CC}"@"${HOST_ALLOCA}" in "${OLDCC}"@?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
+USE_ALLOCA= ${ALLOCA}
+USE_HOST_ALLOCA= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
+USE_HOST_VFPRINTF= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
+USE_HOST_DOPRINT= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
# Dependency on obstack, alloca, malloc or whatever library facilities
# are not installed in the system libraries.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC)
+LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC)
+HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT)
# How to link with both our special library facilities
# and the system's installed libraries.
-LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(CLIB)
+LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(VFPRINTF) $(DOPRINT) $(CLIB)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \
- $(HOST_CLIB)
+ $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) $(HOST_CLIB)
-HOST_RTL = $(HOST_PREFIX)rtl.o
+HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o
HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o
"SHELL=$(SHELL)" \
"STAGE_PREFIX=@stage_prefix_set_by_configure@" \
"exeext=$(exeext)" \
+ "build_exeext=$(build_exeext)" \
"objext=$(objext)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
+ "local_prefix=$(local_prefix)" \
+ "gxx_include_dir=$(gxx_include_dir)" \
"tooldir=$(tooldir)" \
"bindir=$(bindir)" \
"libsubdir=$(libsubdir)"
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)
-# Files specific to the C interpreter bytecode compiler(s).
-BC_OBJS = bc-emit.o bc-optab.o
-
-# Bytecode header files constructed at build time; vmsconfig.com wants this.
-BC_ALL = bc-arity.h bc-opcode.h bc-opname.h
-
SCHED_PREFIX = @sched_prefix@
SCHED_CFLAGS = @sched_cflags@
# Language-independent object files.
OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
- varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o regmove.o \
+ varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o regmove.o \
dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o \
integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \
- regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \
+ regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o gcse.o \
insn-peep.o reorg.o $(SCHED_PREFIX)sched.o final.o recog.o reg-stack.o \
insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
- profile.o insn-attrtab.o $(out_object_file) getpwd.o convert.o $(EXTRA_OBJS)
+ profile.o insn-attrtab.o $(out_object_file) getpwd.o $(EXTRA_OBJS) convert.o
# GEN files are listed separately, so they can be built before doing parallel
# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
# them before rtl.o is compiled.
-GEN= genemit genoutput genrecog genextract genflags gencodes genconfig genpeep
+GEN= genemit genoutput genrecog genextract genflags gencodes genconfig \
+ genpeep gengenrtl gencheck
CCCP=cccp
# Uncomment this line if you want to use cppmain (w/cpplib) as cpp.
# Files to be copied away after each stage in building.
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
- insn-attr.h insn-attrtab.c insn-opinit.c \
- stamp-flags stamp-config stamp-codes stamp-mlib \
- stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \
- stamp-attr stamp-attrtab stamp-opinit stamp-proto stamp-crt stamp-crtS stamp-crt0 \
- genemit$(exeext) genoutput$(exeext) genrecog$(exeext) genextract$(exeext) \
- genflags$(exeext) gencodes$(exeext) genconfig$(exeext) genpeep$(exeext) \
- genattrtab$(exeext) genattr$(exeext) genopinit$(exeext) \
- $(BC_ALL) \
- stamp-bcarity stamp-bcopcode stamp-bcopname \
- bi-arity$(exeext) bi-opcode$(exeext) bi-opname$(exeext) \
+ insn-attr.h insn-attrtab.c insn-opinit.c genrtl.c genrtl.h tree-check.h \
+ s-flags s-config s-codes s-mlib \
+ s-output s-recog s-emit s-extract s-peep \
+ s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
+ genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
+ genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
+ genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
+ genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
+ gencheck$(build_exeext) \
xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
$(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
gcov$(exeext) *.bp \
*.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
- *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack \
+ *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.gcse \
*.[si] \
$(LANG_STAGESTUFF)
_fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
_fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
_fixtfdi _fixunstfdi _floatditf \
- __gcc_bcmp _varargs __dummy _eprintf _op_new _op_vnew _new_handler \
- _op_delete _op_vdel _bb _shtab _clear_cache _trampoline __main _exit \
+ __gcc_bcmp _varargs __dummy _eprintf \
+ _bb _shtab _clear_cache _trampoline __main _exit \
_ctors _eh _pure
+FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
+ _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
+ _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
+ _sf_to_df
+
+DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
+ _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
+ _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
+ _df_to_sf
+
# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
# All they would do is cause complete recompilation every time
# If it is, rm *.o is an easy way to do it.
# CONFIG_H = $(host_xm_file) $(tm_file)
CONFIG_H =
-RTL_H = rtl.h rtl.def machmode.h machmode.def
-TREE_H = tree.h real.h tree.def machmode.h machmode.def
-BYTECODE_H = bytecode.h bc-emit.h bc-optab.h
+RTL_BASE_H = rtl.h rtl.def gansidecl.h machmode.h machmode.def
+RTL_H = $(RTL_BASE_H) genrtl.h
+TREE_H = tree.h real.h tree.def gansidecl.h machmode.h machmode.def tree-check.h
BASIC_BLOCK_H = basic-block.h bitmap.h
-
-# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
-T =
+DEMANGLE_H = demangle.h gansidecl.h
+RECOG_H = recog.h gansidecl.h
#\f
# Language makefile fragments.
# End of language makefile fragments.
#\f
-# Avoid a lot of time thinking about remaking Makefile.in and *.def.
-.SUFFIXES: .in .def
+# The only suffixes we want for implicit rules are .c and .o, so clear
+# the list and add them. This speeds up GNU Make, and allows -r to work.
+.SUFFIXES:
+.SUFFIXES: .c .o
Makefile: $(srcdir)/Makefile.in config.status $(srcdir)/version.c \
$(xmake_file) $(tmake_file) $(LANG_MAKEFILES)
$(srcdir)/config.in: $(srcdir)/cstamp-h.in
$(srcdir)/cstamp-h.in: $(srcdir)/configure.in $(srcdir)/acconfig.h
cd $(srcdir) && autoheader
+ @rm -f $(srcdir)/cstamp-h.in
echo timestamp > $(srcdir)/cstamp-h.in
-config.h: cstamp-h ; @true
+auto-host.h: cstamp-h ; @true
cstamp-h: config.in config.status
- CONFIG_HEADERS=config.h:config.in $(SHELL) config.status
+ CONFIG_HEADERS=auto-host.h:config.in $(SHELL) config.status
# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date. So we must verify that
# This is what to compile if making a cross-compiler.
# Note that we can compile enquire using the cross-compiler just built,
# although we can't run it on this machine.
-all.cross: native gcc-cross specs stmp-headers $(LIBGCC) $(STMP_FIXPROTO) \
+all.cross: native gcc-cross specs stmp-headers $(STMP_FIXPROTO) $(LIBGCC) \
$(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross
# This is what to compile if making gcc with a cross-compiler.
-all.build: native xgcc $(EXTRA_PARTS) lang.all.build
+all.build: native xgcc$(exeext) $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
-start.encap: native xgcc specs $(LIBGCC1) xlimits.h lang.start.encap
+start.encap: native xgcc$(exeext) specs $(LIBGCC1) xlimits.h lang.start.encap
# These can't be made until after GCC can run.
-rest.encap: stmp-headers $(LIBGCC) $(STMP_FIXPROTO) $(EXTRA_PARTS) lang.rest.encap
+rest.encap: stmp-headers $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
# This is what is made with the host's compiler
# whether making a cross compiler or not.
-native: config.status config.h cpp $(LANGUAGES) \
+native: config.status auto-host.h cpp$(exeext) $(LANGUAGES) \
$(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
# Define the names for selecting languages in LANGUAGES.
-C c: cc1
+C c: cc1$(exeext)
PROTO: proto
# Tell GNU make these are phony targets.
@echo "Testing libgcc1. Ignore linker warning messages."
$(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \
-nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name`
-libgcc1-test.o: libgcc1-test.c native xgcc
+libgcc1-test.o: libgcc1-test.c native xgcc$(exeext)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c
# Recompile all the language-independent object files.
# Create a list of the language-independent object files so the language
# subdirectories needn't mention their names explicitly.
-stamp-objlist: $(OBJS) $(BC_OBJS)
- echo " $(OBJS) $(BC_OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
+stamp-objlist: $(OBJS)
+ echo " $(OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
# and CC is `gcc'. It is renamed to `gcc' when it is installed.
-xgcc: gcc.o version.o choose-temp.o pexecute.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o version.o \
+xgcc$(exeext): gcc.o version.o choose-temp.o pexecute.o prefix.o version.o \
+ $(LIBDEPS) $(EXTRA_GCC_OBJS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o prefix.o version.o \
choose-temp.o pexecute.o $(EXTRA_GCC_OBJS) $(LIBS)
# Dump a specs file to make -B./ read these specs over installed ones.
-specs: xgcc
+specs: xgcc$(exeext)
$(GCC_FOR_TARGET) -dumpspecs > tmp-specs
mv tmp-specs specs
# We do want to create an executable named `xgcc', so we can use it to
# compile libgcc2.a.
# Also create gcc-cross, so that install-common will install properly.
-gcc-cross: xgcc
+gcc-cross: xgcc$(exeext)
cp xgcc$(exeext) gcc-cross$(exeext)
-cc1: $(P) $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
+cc1$(exeext): $(P) $(C_OBJS) $(OBJS) $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) $(OBJS) $(LIBS)
# Copy float.h from its source.
gfloat.h: $(FLOAT_H)
-rm -f gfloat.h
cp $(FLOAT_H) gfloat.h
-# Create float.h source for the native machine.
-float.h-nat: enquire
- -./enquire -f > tmp-float.h
- mv tmp-float.h float.h-nat
-
-# Create a dummy float.h source for a cross-compiler.
-# ??? This isn't used anymore. Should we create config/float-unkn.h
-# and make that the default float_format in configure?
-float.h-cross:
- echo "#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
- echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
- echo "#endif" >> t-float.h-cross
- mv t-float.h-cross float.h-cross
-
-# Used to compile enquire with standard cc, but have forgotten why.
-# Let's try with GCC.
-enquire: enquire.o $(GCC_PARTS)
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
-enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
-# Breaking this line caused a problem with one version of GNU make.
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) -I. -c $(srcdir)/enquire.c
-
# Build the version of limits.h that we will install.
xlimits.h: glimits.h limitx.h limity.h
if $(LIMITS_H_TEST) ; then \
# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
# Make an empty file instead.
libgcc1.null: $(GCC_PASSES)
- echo "__foo () {}" > dummy.c
+ echo "void __foo () {}" > dummy.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
$(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy$(objext)
rm -f dummy$(objext) dummy.c
# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
# But recompiling cc1 should not force recompilation of libgcc2.a.
# If you want to force recompilation, delete libgcc2.a.
-libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs
+libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs $(STMP_FIXPROTO)
-if [ -f libgcc2.ready ] ; then \
true; \
else \
touch libgcc2.ready; \
fi
-libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(LIB2FUNCS_EXTRA) \
- $(LANG_LIB2FUNCS) machmode.h longlong.h gbl-ctors.h config.status
+LIB2ADD = $(srcdir)/frame.c $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
+libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(FPBIT) $(DPBIT) $(LIB2ADD) \
+ machmode.h longlong.h frame.h gansidecl.h gbl-ctors.h config.status
# Actually build it in tmplibgcc2.a, then rename at end,
# so that libgcc2.a itself remains nonexistent if compilation is aborted.
-rm -f tmplibgcc2.a
$(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
rm -f $${name}$(objext); \
done
+ if [ x$(FPBIT) != x ]; then \
+ for name in $(FPBIT_FUNCS); \
+ do \
+ echo $${name}; \
+ $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
+ -DFINE_GRAINED_LIBRARIES $(FPBIT) -o $${name}$(objext); \
+ if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
+ rm -f $${name}$(objext); \
+ done; \
+ else true; fi;
+ if [ x$(DPBIT) != x ]; then \
+ for name in $(DPBIT_FUNCS); \
+ do \
+ echo $${name}; \
+ $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
+ -DFINE_GRAINED_LIBRARIES $(DPBIT) -o $${name}$(objext); \
+ if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
+ rm -f $${name}$(objext); \
+ done; \
+ else true; fi;
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
- for file in .. $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS); \
- do \
- if [ x$${file} != x.. ]; then \
- name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
- oname=` echo $${name} | sed -e 's,.*/,,'`; \
- if [ $${name}.txt = $${file} ]; then \
- for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \
- $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
- AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" \
- CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \
- HOST_PREFIX_1="$(HOST_PREFIX_1)" \
- LANGUAGES="$(LANGUAGES)" \
- LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR) $(AR_FLAGS) tmplibgcc2.a $${f}; \
- rm -f $${f}; \
- else true; \
- fi; done; \
- else \
- echo $${name}; \
- if [ $${name}.asm = $${file} ]; then \
- cp $${file} $${name}.s || exit 1; file=$${name}.s; \
- else true; fi; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
+ for file in $(LIB2ADD); do \
+ name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
+ oname=` echo $${name} | sed -e 's,.*/,,'`; \
+ if [ $${name}.txt = $${file} ]; then \
+ for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \
+ $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" \
+ CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \
+ HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ LANGUAGES="$(LANGUAGES)" \
+ LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR) $(AR_FLAGS) tmplibgcc2.a $${oname}$(objext); \
- rm -f $${name}.s $${oname}$(objext); \
- fi; \
- else true; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${f}; \
+ rm -f $${f}; \
+ else true; \
+ fi; done; \
+ else \
+ echo $${name}; \
+ if [ $${name}.asm = $${file} ]; then \
+ cp $${file} $${name}.s || exit 1; file=$${name}.s; \
+ else true; fi; \
+ $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
+ if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${oname}$(objext); \
+ rm -f $${name}.s $${oname}$(objext); \
fi; \
done
mv tmplibgcc2.a libgcc2.a
# Use the genmultilib shell script to generate the information the gcc
# driver program needs to select the library directory based on the
# switches.
-multilib.h: stamp-mlib; @true
-stamp-mlib: $(srcdir)/genmultilib Makefile
+multilib.h: s-mlib; @true
+s-mlib: $(srcdir)/genmultilib Makefile
$(SHELL) $(srcdir)/genmultilib \
"$(MULTILIB_OPTIONS)" \
"$(MULTILIB_DIRNAMES)" \
"$(MULTILIB_EXCEPTIONS)" \
"$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
$(srcdir)/move-if-change tmp-mlib.h multilib.h
- touch stamp-mlib
+ touch s-mlib
# Build multiple copies of libgcc.a, one for each target switch.
stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
- $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS) machmode.h longlong.h gbl-ctors.h \
- config.status
+ frame.h gansidecl.h \
+ $(LIB2ADD) machmode.h longlong.h gbl-ctors.h config.status
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
# Compile two additional files that are linked with every program
# linked using GCC on systems using COFF or ELF, for the sake of C++
# constructors.
-$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
+$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
+ defaults.h frame.h gbl-ctors.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
- -finhibit-size-directive -fno-inline-functions $(CRTSTUFF_T_CFLAGS) \
+ -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \
-c $(srcdir)/crtstuff.c -DCRT_BEGIN -o $(T)crtbegin$(objext)
-$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
+$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
+ defaults.h frame.h gbl-ctors.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
- -finhibit-size-directive -fno-inline-functions $(CRTSTUFF_T_CFLAGS) \
+ -finhibit-size-directive -fno-inline-functions -fno-exceptions $(CRTSTUFF_T_CFLAGS) \
-c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext)
# On some systems we also want to install versions of these files
# compiled using PIC for use in shared libraries.
-crtbeginS.o crtendS.o: stamp-crtS ; @true
+crtbeginS.o crtendS.o: s-crtS ; @true
-stamp-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
+s-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
+ defaults.h frame.h gbl-ctors.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
-DCRT_BEGIN -finhibit-size-directive -fno-inline-functions \
-g0 -c $(srcdir)/crtstuff.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
-DCRT_END -finhibit-size-directive -fno-inline-functions \
-g0 -c $(srcdir)/crtstuff.c -o crtendS$(objext)
- touch stamp-crtS
+ touch s-crtS
# Compile the start modules crt0.o and mcrt0.o that are linked with every program
-crt0.o: stamp-crt0 ; @true
-mcrt0.o: stamp-crt0; @true
+crt0.o: s-crt0 ; @true
+mcrt0.o: s-crt0; @true
-stamp-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H)
+s-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
-o crt0.o -c $(CRT0_S)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
-o mcrt0.o -c $(MCRT0_S)
- touch stamp-crt0
+ touch s-crt0
#\f
# Compiling object files from source files.
# C language specific files.
c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
- $(srcdir)/c-parse.h c-tree.h input.h flags.h
+ $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
$(srcdir)/c-parse.gperf >tmp-gperf.h
$(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
-c-decl.o : c-decl.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h output.h
-c-typeck.o : c-typeck.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h output.h
-c-lang.o : c-lang.c $(CONFIG_H) $(TREE_H)
-c-lex.o : c-lex.c $(CONFIG_H) $(TREE_H) c-lex.h c-tree.h $(srcdir)/c-parse.h \
- input.h flags.h $(srcdir)/c-gperf.h c-pragma.h
-c-aux-info.o : c-aux-info.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h
-c-convert.o : c-convert.c $(CONFIG_H) $(TREE_H) flags.h
-c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H) except.h function.h \
- defaults.h c-pragma.h
-c-iterate.o: c-iterate.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h flags.h
-
-# To make a configuration always use collect2, set USE_COLLECT2 to ld.
-ld: collect2
- rm -f ld$(exeext)
- $(LN) collect2$(exeext) ld$(exeext)
-
-collect2: collect2.o tlink.o hash.o cplus-dem.o underscore.o version.o \
- choose-temp.o $(LIBDEPS)
+c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h flags.h \
+ output.h toplev.h
+c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \
+ output.h expr.h insn-codes.h $(RTL_H) toplev.h
+c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h toplev.h
+c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \
+ $(srcdir)/c-parse.h input.h flags.h $(srcdir)/c-gperf.h c-pragma.h \
+ toplev.h output.h
+c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h
+c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
+c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) except.h \
+ function.h defaults.h c-pragma.h toplev.h
+c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
+ flags.h toplev.h
+
+collect2$(exeext): collect2.o tlink.o hash.o cplus-dem.o underscore.o \
+ version.o choose-temp.o $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
-rm -f collect2$(exeext)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ collect2.o tlink.o hash.o \
cplus-dem.o underscore.o version.o choose-temp.o $(LIBS)
-collect2.o : collect2.c $(CONFIG_H) gstab.h obstack.h demangle.h
+collect2.o : collect2.c $(CONFIG_H) system.h gansidecl.h gstab.h obstack.h \
+ $(DEMANGLE_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
-c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
-tlink.o: tlink.c demangle.h hash.h $(CONFIG_H)
-hash.o: hash.c hash.h
-cplus-dem.o: cplus-dem.c demangle.h
+tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h toplev.h
+hash.o: hash.c hash.h system.h toplev.h
+cplus-dem.o: cplus-dem.c $(DEMANGLE_H)
-underscore.c: stamp-under ; @true
+underscore.c: s-under ; @true
-stamp-under: $(GCC_PASSES)
+s-under: $(GCC_PASSES)
echo "int xxy_us_dummy;" >tmp-dum.c
$(GCC_FOR_TARGET) -S tmp-dum.c
echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c
fi
$(srcdir)/move-if-change tmp-under.c underscore.c
-rm -f tmp-dum.c tmp-dum.s
- touch stamp-under
+ touch s-under
# A file used by all variants of C.
-c-common.o : c-common.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h
+c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
+ flags.h toplev.h output.h
# Language-independent files.
-DDEFAULT_TARGET_VERSION=\"$(version)\" \
-DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
-DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\"
-gcc.o: gcc.c $(CONFIG_H) multilib.h Makefile $(lang_specs_files)
+gcc.o: gcc.c $(CONFIG_H) system.h gansidecl.h multilib.h Makefile \
+ $(lang_specs_files)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(DRIVER_DEFINES) \
-c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
+tree-check.h: s-check ; @true
+s-check : tree.def gencheck $(srcdir)/move-if-change
+ ./gencheck > tmp-check.h
+ $(srcdir)/move-if-change tmp-check.h tree-check.h
+ touch s-check
+
+gencheck : gencheck.o tree.h tree.def $(HOST_LIBDEPS)
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
+ gencheck.o $(HOST_LIBS)
+
+gencheck.o : gencheck.c hconfig.h system.h
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencheck.c
+
dumpvers: dumpvers.c
version.o: version.c
-obstack.o: obstack.c
-choose-temp.o: choose-temp.c
-pexecute.o: pexecute.c
+obstack.o: obstack.c $(CONFIG_H)
+choose-temp.o: choose-temp.c $(CONFIG_H) gansidecl.h system.h
+pexecute.o: pexecute.c $(CONFIG_H) system.h gansidecl.h
+prefix.o: prefix.c $(CONFIG_H) system.h gansidecl.h Makefile
+ $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
+ -DPREFIX=\"$(prefix)\" \
+ -c `echo $(srcdir)/prefix.c | sed 's,^\./,,'`
-convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h
+convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h toplev.h
-tree.o : tree.c $(CONFIG_H) $(TREE_H) flags.h function.h
-print-tree.o : print-tree.c $(CONFIG_H) $(TREE_H)
-stor-layout.o : stor-layout.c $(CONFIG_H) $(TREE_H) flags.h function.h
-fold-const.o : fold-const.c $(CONFIG_H) $(TREE_H) flags.h
-toplev.o : toplev.c $(CONFIG_H) $(TREE_H) $(RTL_H) bytecode.h bc-emit.h \
+tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h except.h
+print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H)
+stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
+ function.h expr.h insn-codes.h $(RTL_H) toplev.h except.h
+fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
+toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) \
flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
+ insn-codes.h insn-config.h recog.h Makefile toplev.h dwarfout.h \
+ dwarf2out.h sdbout.h dbxout.h \
$(lang_options_files)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
-DTARGET_NAME=\"$(target_alias)\" \
-c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
-rtl.o : rtl.c $(CONFIG_H) $(RTL_H)
+rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
-print-rtl.o : print-rtl.c $(CONFIG_H) $(RTL_H)
-rtlanal.o : rtlanal.c $(CONFIG_H) $(RTL_H)
+print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
+rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H)
-varasm.o : varasm.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h function.h \
- defaults.h insn-codes.h expr.h hard-reg-set.h regs.h xcoffout.h \
- output.h bytecode.h c-pragma.h
-function.o : function.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
- insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
- recog.h output.h bytecode.h bc-emit.h
-stmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
+varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
+ function.h defaults.h insn-codes.h expr.h hard-reg-set.h regs.h \
+ xcoffout.h output.h c-pragma.h toplev.h except.h
+function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ function.h insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h \
+ insn-config.h $(RECOG_H) output.h toplev.h except.h
+stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h except.h \
- loop.h recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h \
- bc-optab.h bc-emit.h
-except.o : except.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
- insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
- recog.h output.h except.h
-expr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h regs.h \
- insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h \
- typeclass.h bytecode.h bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h \
- bc-emit.h modemap.def hard-reg-set.h
-calls.o : calls.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-codes.h \
- insn-flags.h
-expmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
- insn-flags.h insn-config.h insn-codes.h expr.h recog.h real.h
-explow.o : explow.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h hard-reg-set.h \
- insn-config.h expr.h recog.h insn-flags.h insn-codes.h
-optabs.o : optabs.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
- insn-flags.h insn-config.h insn-codes.h expr.h recog.h reload.h
-dbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h regs.h \
- insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h
-sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h except.h \
+ loop.h $(RECOG_H) toplev.h output.h
+except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ function.h insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h \
+ insn-config.h $(RECOG_H) output.h except.h toplev.h
+expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
+ regs.h insn-flags.h insn-codes.h expr.h insn-config.h $(RECOG_H) output.h \
+ typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
+calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h expr.h \
+ insn-codes.h insn-flags.h regs.h toplev.h output.h
+expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ insn-flags.h insn-config.h insn-codes.h expr.h $(RECOG_H) real.h
+explow.o : explow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ hard-reg-set.h insn-config.h expr.h $(RECOG_H) insn-flags.h insn-codes.h
+optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ insn-flags.h insn-config.h insn-codes.h expr.h $(RECOG_H) reload.h
+dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h regs.h \
+ insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
+ toplev.h
+sdbout.o : sdbout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h except.h \
function.h expr.h output.h hard-reg-set.h regs.h defaults.h real.h \
- insn-config.h bytecode.h obstack.h xcoffout.h c-pragma.h
-dwarfout.o : dwarfout.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf.h flags.h \
- insn-config.h reload.h output.h defaults.h
-dwarf2out.o : dwarf2out.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf2.h flags.h \
- insn-config.h reload.h output.h defaults.h hard-reg-set.h regs.h expr.h
-xcoffout.o : xcoffout.c $(CONFIG_H) $(TREE_H) $(RTL_H) xcoffout.h flags.h
-emit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
- function.h regs.h insn-config.h insn-codes.h real.h expr.h bytecode.h \
- bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h bc-emit.h bc-opname.h
-real.o : real.c $(CONFIG_H) $(TREE_H)
-getpwd.o : getpwd.c $(CONFIG_H)
-
-integrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h integrate.h \
- insn-flags.h insn-config.h insn-codes.h expr.h real.h regs.h function.h \
- bytecode.h
-
-jump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \
- insn-config.h insn-flags.h insn-codes.h expr.h real.h
-stupid.o : stupid.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h
-
-cse.o : cse.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h real.h \
- insn-config.h recog.h
-profile.o : profile.c $(CONFIG_H) $(RTL_H) flags.h insn-flags.h gcov-io.h \
- tree.h output.h
-loop.o : loop.c $(CONFIG_H) $(RTL_H) flags.h loop.h insn-config.h \
- insn-flags.h insn-codes.h regs.h hard-reg-set.h recog.h expr.h real.h
-unroll.o : unroll.c $(CONFIG_H) $(RTL_H) insn-config.h insn-codes.h \
- integrate.h regs.h flags.h expr.h loop.h
-flow.o : flow.c $(CONFIG_H) $(RTL_H) flags.h insn-config.h \
+ insn-config.h obstack.h xcoffout.h c-pragma.h sdbout.h
+dwarfout.o : dwarfout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf.h \
+ flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
+dwarf2out.o : dwarf2out.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf2.h \
+ flags.h insn-config.h insn-codes.h reload.h output.h defaults.h \
+ hard-reg-set.h regs.h expr.h toplev.h dwarf2out.h
+xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \
+ flags.h
+emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ except.h function.h regs.h insn-config.h insn-codes.h $(RECOG_H) real.h \
+ expr.h obstack.h hard-reg-set.h bitmap.h
+real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
+getpwd.o : getpwd.c $(CONFIG_H) system.h
+
+integrate.o : integrate.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ integrate.h insn-flags.h insn-config.h insn-codes.h expr.h real.h regs.h \
+ function.h output.h $(RECOG_H) except.h toplev.h
+
+jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h regs.h \
+ insn-config.h insn-codes.h insn-flags.h $(RECOG_H) expr.h real.h except.h
+stupid.o : stupid.c $(CONFIG_H) system.h $(RTL_H) regs.h hard-reg-set.h flags.h
+
+cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) regs.h hard-reg-set.h flags.h \
+ real.h insn-config.h insn-codes.h $(RECOG_H) expr.h
+gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) regs.h hard-reg-set.h flags.h \
+ real.h insn-config.h insn-codes.h $(RECOG_H) expr.h basic-block.h
+profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-flags.h \
+ gcov-io.h $(TREE_H) output.h regs.h toplev.h
+loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h loop.h insn-config.h \
+ insn-flags.h insn-codes.h regs.h hard-reg-set.h $(RECOG_H) expr.h real.h
+unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h insn-codes.h \
+ integrate.h regs.h $(RECOG_H) flags.h expr.h loop.h
+flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) regs.h hard-reg-set.h output.h
-combine.o : combine.c $(CONFIG_H) $(RTL_H) flags.h \
+combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h \
insn-config.h insn-flags.h insn-codes.h insn-attr.h regs.h expr.h \
- $(BASIC_BLOCK_H) recog.h real.h hard-reg-set.h
-regclass.o : regclass.c $(CONFIG_H) $(RTL_H) hard-reg-set.h flags.h \
- $(BASIC_BLOCK_H) regs.h insn-config.h recog.h reload.h real.h bytecode.h
-local-alloc.o : local-alloc.c $(CONFIG_H) $(RTL_H) flags.h $(BASIC_BLOCK_H) \
- regs.h hard-reg-set.h insn-config.h recog.h output.h
-bitmap.o : bitmap.c $(CONFIG_H) $(RTL_H) flags.h $(BASIC_BLOCK_H) regs.h
-global.o : global.c $(CONFIG_H) $(RTL_H) flags.h \
+ $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h
+regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
+ $(BASIC_BLOCK_H) regs.h insn-config.h $(RECOG_H) reload.h real.h toplev.h \
+ output.h
+local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
+ $(BASIC_BLOCK_H) regs.h hard-reg-set.h insn-config.h $(RECOG_H) output.h
+bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
+ regs.h
+global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h \
$(BASIC_BLOCK_H) regs.h hard-reg-set.h insn-config.h output.h
-reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h output.h expr.h\
- reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h
-reload1.o : reload1.c $(CONFIG_H) $(RTL_H) real.h flags.h expr.h \
+reload.o : reload.c $(CONFIG_H) system.h $(RTL_H) flags.h output.h expr.h \
+ reload.h $(RECOG_H) hard-reg-set.h insn-config.h insn-codes.h regs.h \
+ real.h toplev.h
+reload1.o : reload1.c $(CONFIG_H) system.h $(RTL_H) real.h flags.h expr.h \
reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
- $(BASIC_BLOCK_H) recog.h output.h
-caller-save.o : caller-save.c $(CONFIG_H) $(RTL_H) flags.h \
- regs.h hard-reg-set.h insn-codes.h insn-config.h $(BASIC_BLOCK_H) recog.h \
+ $(BASIC_BLOCK_H) $(RECOG_H) output.h toplev.h
+caller-save.o : caller-save.c $(CONFIG_H) system.h $(RTL_H) flags.h \
+ regs.h hard-reg-set.h insn-codes.h insn-config.h $(BASIC_BLOCK_H) $(RECOG_H) \
reload.h expr.h
-reorg.o : reorg.c $(CONFIG_H) $(RTL_H) conditions.h hard-reg-set.h \
- $(BASIC_BLOCK_H) regs.h insn-config.h insn-attr.h insn-flags.h recog.h \
- flags.h output.h
-alias.o : alias.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \
+reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
+ $(BASIC_BLOCK_H) regs.h insn-config.h insn-codes.h insn-attr.h \
+ insn-flags.h $(RECOG_H) flags.h output.h expr.h
+alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h regs.h \
insn-codes.h
-regmove.o : regmove.c $(CONFIG_H) $(RTL_H) insn-config.h recog.h output.h \
- reload.h regs.h hard-reg-set.h flags.h expr.h insn-flags.h
-$(SCHED_PREFIX)sched.o : $(SCHED_PREFIX)sched.c $(CONFIG_H) $(RTL_H) $(BASIC_BLOCK_H) regs.h hard-reg-set.h \
- flags.h insn-config.h insn-attr.h
-final.o : final.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h regs.h \
- recog.h conditions.h insn-config.h insn-attr.h except.h real.h output.h \
- hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h
-recog.o : recog.c $(CONFIG_H) $(RTL_H) \
- regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
+regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
+ insn-codes.h recog.h output.h reload.h regs.h hard-reg-set.h flags.h \
+ expr.h insn-flags.h
+$(SCHED_PREFIX)sched.o : $(SCHED_PREFIX)sched.c $(CONFIG_H) system.h $(RTL_H) \
+ $(BASIC_BLOCK_H) regs.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
+ toplev.h
+final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h regs.h \
+ $(RECOG_H) conditions.h insn-config.h insn-attr.h except.h real.h output.h \
+ hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h \
+ toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
+recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) \
+ regs.h $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
insn-flags.h insn-codes.h real.h
-reg-stack.o : reg-stack.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
- regs.h hard-reg-set.h flags.h insn-config.h insn-flags.h
+reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) \
+ regs.h hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \
$(RTL_H) regs.h hard-reg-set.h real.h insn-config.h conditions.h \
- insn-flags.h output.h insn-attr.h insn-codes.h
+ insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
-mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H)
+mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) system.h
mips-tdump: mips-tdump.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
-mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H)
+mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) system.h
# Build file to support OSF/rose half-pic format.
-halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H)
+halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H) system.h
# Normally this target is not used; but it is used if you
# define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
# Each of the other insn-* files is handled by a similar pair of rules.
# This causes an anomaly in the results of make -n
-# because insn-* is older than stamp-*
+# because insn-* is older than s-*
# and thus make -n thinks that insn-* will be updated
# and force recompilation of things that depend on it.
# We use move-if-change precisely to avoid such recompilation.
# versions of make which don't like empty commands (nothing after the
# trailing `;'), we call true for each.
-insn-config.h: stamp-config ; @true
-stamp-config : $(md_file) genconfig $(srcdir)/move-if-change
+insn-config.h: s-config ; @true
+s-config : $(md_file) genconfig $(srcdir)/move-if-change
./genconfig $(md_file) > tmp-config.h
$(srcdir)/move-if-change tmp-config.h insn-config.h
- touch stamp-config
+ touch s-config
-insn-flags.h: stamp-flags ; @true
-stamp-flags : $(md_file) genflags $(srcdir)/move-if-change
+insn-flags.h: s-flags ; @true
+s-flags : $(md_file) genflags $(srcdir)/move-if-change
./genflags $(md_file) > tmp-flags.h
$(srcdir)/move-if-change tmp-flags.h insn-flags.h
- touch stamp-flags
+ touch s-flags
-insn-codes.h: stamp-codes ; @true
-stamp-codes : $(md_file) gencodes $(srcdir)/move-if-change
+insn-codes.h: s-codes ; @true
+s-codes : $(md_file) gencodes $(srcdir)/move-if-change
./gencodes $(md_file) > tmp-codes.h
$(srcdir)/move-if-change tmp-codes.h insn-codes.h
- touch stamp-codes
+ touch s-codes
insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) expr.h real.h output.h \
- insn-config.h insn-flags.h insn-codes.h
+ insn-config.h insn-flags.h insn-codes.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
-insn-emit.c: stamp-emit ; @true
-stamp-emit : $(md_file) genemit $(srcdir)/move-if-change
+insn-emit.c: s-emit ; @true
+s-emit : $(md_file) genemit $(srcdir)/move-if-change
./genemit $(md_file) > tmp-emit.c
$(srcdir)/move-if-change tmp-emit.c insn-emit.c
- touch stamp-emit
+ touch s-emit
-insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h recog.h \
- real.h output.h flags.h
+insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h $(RECOG_H) \
+ real.h output.h flags.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
-insn-recog.c: stamp-recog ; @true
-stamp-recog : $(md_file) genrecog $(srcdir)/move-if-change
+insn-recog.c: s-recog ; @true
+s-recog : $(md_file) genrecog $(srcdir)/move-if-change
./genrecog $(md_file) > tmp-recog.c
$(srcdir)/move-if-change tmp-recog.c insn-recog.c
- touch stamp-recog
+ touch s-recog
insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
- insn-config.h flags.h rtl.h recog.h expr.h reload.h
+ insn-config.h flags.h $(RECOG_H) expr.h reload.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
-insn-opinit.c: stamp-opinit ; @true
-stamp-opinit : $(md_file) genopinit $(srcdir)/move-if-change
+insn-opinit.c: s-opinit ; @true
+s-opinit : $(md_file) genopinit $(srcdir)/move-if-change
./genopinit $(md_file) > tmp-opinit.c
$(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
- touch stamp-opinit
+ touch s-opinit
-insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H)
+insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H) system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c
-insn-extract.c: stamp-extract ; @true
-stamp-extract : $(md_file) genextract $(srcdir)/move-if-change
+insn-extract.c: s-extract ; @true
+s-extract : $(md_file) genextract $(srcdir)/move-if-change
./genextract $(md_file) > tmp-extract.c
$(srcdir)/move-if-change tmp-extract.c insn-extract.c
- touch stamp-extract
+ touch s-extract
-insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h output.h real.h
+insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h output.h real.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c
-insn-peep.c: stamp-peep ; @true
-stamp-peep : $(md_file) genpeep $(srcdir)/move-if-change
+insn-peep.c: s-peep ; @true
+s-peep : $(md_file) genpeep $(srcdir)/move-if-change
./genpeep $(md_file) > tmp-peep.c
$(srcdir)/move-if-change tmp-peep.c insn-peep.c
- touch stamp-peep
+ touch s-peep
insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) regs.h real.h output.h \
- insn-attr.h insn-config.h
+ insn-attr.h insn-config.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
-insn-attr.h: stamp-attr ; @true
-stamp-attr : $(md_file) genattr $(srcdir)/move-if-change
+insn-attr.h: s-attr ; @true
+s-attr : $(md_file) genattr $(srcdir)/move-if-change
./genattr $(md_file) > tmp-attr.h
$(srcdir)/move-if-change tmp-attr.h insn-attr.h
- touch stamp-attr
+ touch s-attr
-insn-attrtab.c: stamp-attrtab ; @true
-stamp-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
+insn-attrtab.c: s-attrtab ; @true
+s-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
if cmp -s $(PREMADE_ATTRTAB_MD) $(md_file); \
then \
echo Using $(PREMADE_ATTRTAB); \
./genattrtab $(md_file) > tmp-attrtab.c; \
fi
$(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
- touch stamp-attrtab
+ touch s-attrtab
insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) regs.h real.h conditions.h \
- hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h recog.h \
- insn-codes.h
+ hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h $(RECOG_H) \
+ insn-codes.h system.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
-insn-output.c: stamp-output ; @true
-stamp-output : $(md_file) genoutput $(srcdir)/move-if-change
+insn-output.c: s-output ; @true
+s-output : $(md_file) genoutput $(srcdir)/move-if-change
./genoutput $(md_file) > tmp-output.c
$(srcdir)/move-if-change tmp-output.c insn-output.c
- touch stamp-output
+ touch s-output
+
+genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h
+genrtl.c genrtl.h : s-genrtl
+ @true # force gnu make to recheck modification times.
+
+s-genrtl: gengenrtl $(srcdir)/move-if-change $(RTL_BASE_H)
+ ./gengenrtl tmp-genrtl.h tmp-genrtl.c
+ $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
+ $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
+ touch s-genrtl
+
#\f
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
$(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
mv tmp-$@ $@
-genconfig : genconfig.o $(HOST_RTL) $(HOST_LIBDEPS)
+genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genconfig.o $(HOST_RTL) $(HOST_LIBS)
+ genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genconfig.o : genconfig.c $(RTL_H) $(build_xm_file)
+genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
-genflags : genflags.o $(HOST_RTL) $(HOST_LIBDEPS)
+genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genflags.o $(HOST_RTL) $(HOST_LIBS)
+ genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genflags.o : genflags.c $(RTL_H) $(build_xm_file)
+genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
-gencodes : gencodes.o $(HOST_RTL) $(HOST_LIBDEPS)
+gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- gencodes.o $(HOST_RTL) $(HOST_LIBS)
+ gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-gencodes.o : gencodes.c $(RTL_H) $(build_xm_file)
+gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
-genemit : genemit.o $(HOST_RTL) $(HOST_LIBDEPS)
+genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genemit.o $(HOST_RTL) $(HOST_LIBS)
+ genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genemit.o : genemit.c $(RTL_H) $(build_xm_file)
+genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
-genopinit : genopinit.o $(HOST_RTL) $(HOST_LIBDEPS)
+genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genopinit.o $(HOST_RTL) $(HOST_LIBS)
+ genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genopinit.o : genopinit.c $(RTL_H) $(build_xm_file)
+genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
-genrecog : genrecog.o $(HOST_RTL) $(HOST_LIBDEPS)
+genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genrecog.o $(HOST_RTL) $(HOST_LIBS)
+ genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genrecog.o : genrecog.c $(RTL_H) $(build_xm_file)
+genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
-genextract : genextract.o $(HOST_RTL) $(HOST_LIBDEPS)
+genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genextract.o $(HOST_RTL) $(HOST_LIBS)
+ genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genextract.o : genextract.c $(RTL_H) $(build_xm_file) insn-config.h
+genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
-genpeep : genpeep.o $(HOST_RTL) $(HOST_LIBDEPS)
+genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genpeep.o $(HOST_RTL) $(HOST_LIBS)
+ genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genpeep.o : genpeep.c $(RTL_H) $(build_xm_file)
+genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
-genattr : genattr.o $(HOST_RTL) $(HOST_LIBDEPS)
+genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genattr.o $(HOST_RTL) $(HOST_LIBS)
+ genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genattr.o : genattr.c $(RTL_H) $(build_xm_file)
+genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)
-genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) insn-config.h
+genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) system.h insn-config.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
-genoutput : genoutput.o $(HOST_RTL) $(HOST_LIBDEPS)
+genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- genoutput.o $(HOST_RTL) $(HOST_LIBS)
+ genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_LIBS)
-genoutput.o : genoutput.c $(RTL_H) $(build_xm_file)
+genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
+
+gengenrtl : gengenrtl.o $(HOST_LIBDEPS)
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
+ gengenrtl.o $(HOST_LIBS)
+
+gengenrtl.o : gengenrtl.c $(RTL_BASE_H) system.h
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gengenrtl.c
+
#\f
# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, alloca.o, etc.
-$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) $(RTL_H)
+$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h
rm -f $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
+$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(CONFIG_H) system.h $(RTL_H) \
+ flags.h $(BASIC_BLOCK_H) regs.h
+ rm -f $(HOST_PREFIX)bitmap.c
+ sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c
+
$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H)
rm -f $(HOST_PREFIX)rtlanal.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/obstack.c > $(HOST_PREFIX)obstack.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
+$(HOST_PREFIX_1)vfprintf.o: vfprintf.c
+ rm -f $(HOST_PREFIX)vfprintf.c
+ sed -e 's/config[.]h/hconfig.h/' $(srcdir)/vfprintf.c > $(HOST_PREFIX)vfprintf.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)vfprintf.c
+
+$(HOST_PREFIX_1)doprint.o: doprint.c
+ rm -f $(HOST_PREFIX)doprint.c
+ sed -e 's/config[.]h/hconfig.h/' $(srcdir)/doprint.c > $(HOST_PREFIX)doprint.c
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)doprint.c
+
$(HOST_PREFIX_1)malloc.o: malloc.c
rm -f $(HOST_PREFIX)malloc.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
# that does not need to compile alloca, malloc or whatever.
$(HOST_PREFIX_1):
touch $(HOST_PREFIX_1)
-#\f
-# Remake bytecode files.
-BI_OBJ=bi-parser.o bi-lexer.o bi-reverse.o
-
-bc-emit.o : bc-emit.c $(CONFIG_H) $(RTL_H) real.h $(BYTECODE_H) \
- bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
-bc-optab.o : bc-optab.c $(CONFIG_H) $(REAL_H) $(BYTECODE_H) \
- bc-opcode.h bc-typecd.h bc-typecd.def
-
-bi-arity: bi-arity.o $(BI_OBJ) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- bi-arity.o $(BI_OBJ) $(HOST_LIBS)
-bi-opcode: bi-opcode.o $(BI_OBJ) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- bi-opcode.o $(BI_OBJ) $(HOST_LIBS)
-bi-opname: bi-opname.o $(BI_OBJ) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
- bi-opname.o $(BI_OBJ) $(HOST_LIBS)
-
-$(srcdir)/bi-parser.h: $(srcdir)/bi-parser.c
-$(srcdir)/bi-parser.c: $(srcdir)/bi-parser.y
- cd $(srcdir); $(BISON) $(BISONFLAGS) -d bi-parser.y -o bi-parser.c
-
-bi-parser.o: $(srcdir)/bi-parser.c bi-defs.h $(build_xm_file)
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/bi-parser.c
-bi-lexer.o: bi-lexer.c $(srcdir)/bi-parser.h $(build_xm_file)
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/bi-lexer.c
-bi-arity.o: bi-arity.c bi-defs.h $(build_xm_file)
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/bi-arity.c
-bi-opcode.o: bi-opcode.c bi-defs.h $(build_xm_file)
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/bi-opcode.c
-bi-opname.o: bi-opname.c bi-defs.h $(build_xm_file)
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/bi-opname.c
-bi-reverse.o: bi-reverse.c bi-defs.h
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/bi-reverse.c
-
-bc-arity.h: stamp-bcarity ; @true
-stamp-bcarity : $(srcdir)/bytecode.def bi-arity $(srcdir)/move-if-change
- ./bi-arity < $(srcdir)/bytecode.def >tmp-bc-arity.h
- $(srcdir)/move-if-change tmp-bc-arity.h bc-arity.h
- touch stamp-bcarity
-
-bc-opcode.h: stamp-bcopcode ; @true
-stamp-bcopcode : $(srcdir)/bytecode.def bi-opcode $(srcdir)/move-if-change
- ./bi-opcode < $(srcdir)/bytecode.def >tmp-bcopcd.h
- $(srcdir)/move-if-change tmp-bcopcd.h bc-opcode.h
- touch stamp-bcopcode
-
-bc-opname.h: stamp-bcopname ; @true
-stamp-bcopname : $(srcdir)/bytecode.def bi-opname $(srcdir)/move-if-change
- ./bi-opname < $(srcdir)/bytecode.def >tmp-bcopnm.h
- $(srcdir)/move-if-change tmp-bcopnm.h bc-opname.h
- touch stamp-bcopname
-
-bytecode.mostlyclean:
- -rm -f bc-arity.h bc-opcode.h bc-opname.h
-
-bytecode.distclean bytecode.clean: bytecode.mostlyclean
- -rm -f bi-arity bi-opcode bi-opname bi-lexer
-
-bytecode.maintainer-clean: bytecode.clean
- -rm -f bi-parser.c bi-parser.h
#\f
# Remake cpp and protoize.
# Making the preprocessor
-cpp: $(CCCP)
+cpp$(exeext): $(CCCP)$(exeext)
-rm -f cpp$(exeext)
$(LN) $(CCCP)$(exeext) cpp$(exeext)
-cccp: cccp.o cexp.o version.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cccp.o cexp.o \
+cccp$(exeext): cccp.o cexp.o version.o prefix.o $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cccp.o cexp.o prefix.o \
version.o $(LIBS)
-cexp.o: $(srcdir)/cexp.c $(CONFIG_H)
+cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h gansidecl.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
$(srcdir)/cexp.c: $(srcdir)/cexp.y
cd $(srcdir); $(BISON) -o cexp.c cexp.y
-cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status
-# The reason we use $(libdir)/g++-include rather than using libsubdir
-# is for compatibility with the current version of libg++.
+cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status system.h gansidecl.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DOLD_GPLUSPLUS_INCLUDE_DIR=\"$(old_gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
- -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
+ -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`
-cppmain: cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
- version.o $(LIBDEPS)
+cppmain$(exeext): cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
+ prefix.o version.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cppmain.o cpplib.o cpphash.o \
- cppalloc.o cpperror.o cppexp.o version.o $(LIBS)
+ cppalloc.o cpperror.o cppexp.o prefix.o version.o $(LIBS)
-cppmain.o: cppmain.c $(CONFIG_H) cpplib.h
+cppmain.o: cppmain.c $(CONFIG_H) cpplib.h system.h gansidecl.h
-cpplib.o: cpplib.c $(CONFIG_H) cpplib.h cpphash.h config.status
+cpplib.o: cpplib.c $(CONFIG_H) cpplib.h cpphash.h config.status system.h \
+ gansidecl.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DOLD_GPLUSPLUS_INCLUDE_DIR=\"$(old_gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
- -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
+ -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-c `echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
-cpperror.o: cpperror.c $(CONFIG_H) cpplib.h
+cpperror.o: cpperror.c $(CONFIG_H) cpplib.h system.h gansidecl.h
-cppexp.o: cppexp.c $(CONFIG_H) cpplib.h
+cppexp.o: cppexp.c $(CONFIG_H) cpplib.h system.h gansidecl.h
-cpphash.o: cpphash.c cpplib.h cpphash.h
+cpphash.o: cpphash.c cpplib.h cpphash.h $(CONFIG_H) system.h gansidecl.h
-cppalloc.o: cppalloc.c $(CONFIG_H)
+cppalloc.o: cppalloc.c $(CONFIG_H) cpplib.h system.h gansidecl.h
# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).
-proto: config.status protoize unprotoize SYSCALLS.c.X
+proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X
-protoize: protoize.o getopt.o getopt1.o getpwd.o version.o \
+protoize$(exeext): protoize.o getopt.o getopt1.o getpwd.o version.o \
pexecute.o choose-temp.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
protoize.o getopt.o getopt1.o getpwd.o version.o \
pexecute.o choose-temp.o $(LIBS)
-protoize.o: stamp-proto ; @true
-unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o \
+unprotoize$(exeext): unprotoize.o getopt.o getopt1.o getpwd.o version.o \
pexecute.o choose-temp.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
unprotoize.o getopt.o getopt1.o getpwd.o version.o \
pexecute.o choose-temp.o $(LIBS)
-unprotoize.o: stamp-proto ; @true
-stamp-proto: protoize.c getopt.h $(CONFIG_H)
+protoize.o: protoize.c getopt.h $(CONFIG_H) system.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
- -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
+ -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DSTD_PROTO_DIR=\"$(libsubdir)\" \
- -DUNPROTOIZE $(srcdir)/protoize.c
- mv protoize$(objext) unprotoize$(objext)
+ $(srcdir)/protoize.c
+
+unprotoize.o: unprotoize.c protoize.c getopt.h $(CONFIG_H) system.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
- -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
+ -DCROSS_INCLUDE_DIR=\"$(tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DSTD_PROTO_DIR=\"$(libsubdir)\" \
- $(srcdir)/protoize.c
- touch stamp-proto
+ $(srcdir)/unprotoize.c
getopt.o: getopt.c getopt.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c
diff $(srcdir)/protoize.c tmp-proto.c | cat
-rm -f tmp-proto.[cs] tmp-proto$(objext)
-gcov.o: gcov.c gcov-io.h
+gcov.o: gcov.c gcov-io.h system.h
-gcov: gcov.o $(LIBDEPS)
+# Only one of 'gcov' or 'gcov.exe' is actually built, depending
+# upon whether $(exeext) is empty or not.
+gcov$(exeext): gcov.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) gcov.o $(LIBS) -o $@
#\f
# Build the include directory. The stamp files are stmp-* rather than
-# stamp-* so that mostlyclean does not force the include directory to
+# s-* so that mostlyclean does not force the include directory to
# be rebuilt.
-# Build the include directory except for float.h (which depends upon
+# Build the include directory including float.h (which no longer depends upon
# enquire).
-stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h
+stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h gfloat.h
# Copy in the headers provided with gcc.
# The sed command gets just the last file name component;
# this is necessary because VPATH could add a dirname.
# Using basename would be simpler, but some systems don't have it.
+# The touch command is here to workaround an AIX/Linux NFS bug.
for file in .. $(USER_H); do \
if [ X$$file != X.. ]; then \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
+ touch include/$$realfile; \
rm -f include/$$realfile; \
cp $$file include; \
chmod a+r include/$$realfile; \
rm -f include/limits.h
cp xlimits.h include/limits.h
chmod a+r include/limits.h
+ rm -f include/float.h
+ if [ -s gfloat.h ]; then \
+ cp gfloat.h include/float.h && \
+ chmod a+r include/float.h; \
+ else :; fi
# Install the README
rm -f include/README
cp $(srcdir)/README-fixinc include/README
chmod a+r include/README
- touch stmp-int-hdrs
+ touch $@
-# Build the complete include directory.
-stmp-headers: stmp-int-hdrs gfloat.h
- rm -f include/float.h
- cp gfloat.h include/float.h
- chmod a+r include/float.h
- touch stmp-headers
+# Now that gfloat.h no longer depends upon enquire, this is actually a no-op.
+stmp-headers:
+ touch $@
+
+fixinc.sh :
+ DEST=`cd $(srcdir) ; pwd`/$@ CC=$(CC) MAKE=$(MAKE) CFLAGS="$(CFLAGS)" \
+ export DEST CC MAKE CFLAGS ; \
+ echo DEST=$$DEST CC=$$CC MAKE=$$MAKE CFLAGS=$$CFLAGS ; \
+ cd ../contrib/fixinc ; \
+ $(SHELL) mkfixinc.sh $(target) $$DEST
# Build fixed copies of system files.
stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
$(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
else true; fi; \
done; \
+ rm -f include/assert.h; \
+ cp $(srcdir)/assert.h include/assert.h; \
+ chmod a+r include/assert.h; \
else true; \
fi
rm -f include/syslimits.h
# Files related to the fixproto script.
deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
- CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
+ if [ -d $(SYSTEM_HEADER_DIR) ]; \
+ then \
+ CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
export CC; \
- $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h
- mv tmp-deduced.h deduced.h
+ $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \
+ mv tmp-deduced.h deduced.h; \
+ else \
+ touch deduced.h; \
+ fi
gen-protos: gen-protos.o scan.o cppalloc.o $(HOST_LIBDEPS)
${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gen-protos.o scan.o cppalloc.o $(HOST_LIBS)
-gen-protos.o: gen-protos.c scan.h $(build_xm_file)
+gen-protos.o: gen-protos.c scan.h $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c
-scan.o: scan.c scan.h $(build_xm_file)
+scan.o: scan.c scan.h $(build_xm_file) system.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
rm -rf fixtmp.c
fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
- cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o version.o
+ cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o prefix.o version.o
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
- scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o version.o \
- cppexp.o $(HOST_LIBS)
+ scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o prefix.o \
+ version.o cppexp.o $(HOST_LIBS)
-fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h $(build_xm_file)
+fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h $(build_xm_file) \
+ system.h cpplib.h cpphash.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
-scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file)
+scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file) system.h gansidecl.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
# stmp-fixproto depends on this, not on fix-header directly.
else \
: This line works around a 'make' bug in BSDI 1.1.; \
FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
- $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
+ if [ -d $(SYSTEM_HEADER_DIR) ] ; then \
+ $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
+ else true; fi; \
touch include/fixed; \
fi
touch stmp-fixproto
# Remake the info files.
doc: info
-info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info
-
-$(srcdir)/cpp.info: cpp.texi
- cd $(srcdir); $(MAKEINFO) $(MAKEINFOFLAGS) cpp.texi
+info: cpp.info gcc.info lang.info
-$(srcdir)/gcc.info: gcc.texi extend.texi install.texi invoke.texi \
- md.texi rtl.texi tm.texi gcov.texi
- cd $(srcdir); $(MAKEINFO) $(MAKEINFOFLAGS) gcc.texi
+cpp.info: $(srcdir)/cpp.texi
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o cpp.info $(srcdir)/cpp.texi
-dvi: $(srcdir)/gcc.dvi $(srcdir)/cpp.dvi lang.dvi
+gcc.info: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
+ $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
+ $(srcdir)/tm.texi $(srcdir)/gcov.texi
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I$(srcdir) -o gcc.info $(srcdir)/gcc.texi
-# This works with GNU Make's default rule.
-$(srcdir)/gcc.dvi: gcc.texi extend.texi install.texi invoke.texi \
- md.texi rtl.texi tm.texi gcov.texi
- $(TEXI2DVI) $<
+dvi: gcc.dvi cpp.dvi lang.dvi
# This works with GNU Make's default rule.
-$(srcdir)/cpp.dvi: cpp.texi
- $(TEXI2DVI) $<
-
-$(srcdir)/INSTALL: install1.texi install.texi
- cd $(srcdir); $(MAKEINFO) -D INSTALLONLY --no-header --no-split \
- install1.texi -o INSTALL
+gcc.dvi: $(srcdir)/gcc.texi $(srcdir)/extend.texi $(srcdir)/install.texi \
+ $(srcdir)/invoke.texi $(srcdir)/md.texi $(srcdir)/rtl.texi \
+ $(srcdir)/tm.texi $(srcdir)/gcov.texi
+ TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
+ texindex gcc.??
+ TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
+
+cpp.dvi: $(srcdir)/cpp.texi
+ TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
+ texindex cpp.??
+ TEXINPUTS=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
+
+
+INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi
+ $(MAKEINFO) -D INSTALLONLY --no-header --no-split -o INSTALL \
+ $(srcdir)/install1.texi
#\f
# Deletion of files made during compilation.
# There are four levels of this:
# (less duplicated code).
-mostlyclean: bytecode.mostlyclean lang.mostlyclean
+mostlyclean: lang.mostlyclean
-rm -f $(STAGESTUFF)
# Delete the temporary source copies for cross compilation.
-rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
# Delete the temp files made in the course of building libgcc.a.
-rm -f tmplibgcc* tmpcopy xlimits.h libgcc1-test
for name in $(LIB1FUNCS); do rm -f $${name}.c; done
-# Delete other temporary files.
- -rm -f tmp-float.h tmp-gcc.xtar.gz
- -rm -f tmp-foo1 tmp-foo2 tmp-proto.* tmp-unproto.1 tmp-SYSCALLS.s
- -rm -f tmp-c-parse.y tmp-gperf.h
- -rm -f tmp-specs t-float.h-cross tmp-xlimits.h
- -rm -f tmp-fixtmp.c xsys-protos.hT
-# Delete the stamp files.
- -rm -f stamp-* tmp-*
+# Delete other built files.
+ -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
+# Delete the stamp and temporary files.
+ -rm -f s-* tmp-* stamp-* stmp-*
-rm -f */stamp-* */tmp-*
# Delete debugging dump files.
-rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
- -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack
+ -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack *.addressof
+ -rm -f *.regmove *.mach *.bp *.gcse
-rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl
-rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2
- -rm -f */*.sched2 */*.stack
+ -rm -f */*.sched2 */*.stack */*.regmove */*.gcse
# Delete some files made during installation.
-rm -f specs gfloat.h float.h-* enquire SYSCALLS.c.X SYSCALLS.c
-rm -f collect collect2 mips-tfile mips-tdump alloca.s
# Delete all files made by compilation
# that don't exist in the distribution.
-clean: mostlyclean bytecode.clean lang.clean
+clean: mostlyclean lang.clean
# It may not be quite desirable to delete unprotoize.c here,
# but the spec for `make clean' requires it.
# Using unprotoize.c is not quite right in the first place,
rm -f md ; \
fi
# Delete the include directory.
- -rm -rf stmp-* include
- -rm -f */stmp-*
+ -rm -rf include
# Delete files used by the "multilib" facility (including libgcc subdirs).
-rm -f multilib.h tmpmultilib*
-if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
fi ; fi
+ -rm -fr stage1 stage2 stage3 stage4
# Delete all files that users would normally create
# while building and installing GCC.
-distclean: clean bytecode.distclean lang.distclean
- -rm -f tm.h config.h config2.h tconfig.h hconfig.h md cstamp-h
+distclean: clean lang.distclean
+ -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
+ -rm -f md cstamp-h
-rm -f config.status config.run config.cache config.bak
-rm -f Make-lang Make-hooks Make-host Make-target
-rm -f Makefile specs.h options.h *.oaux
- -rm -fr stage1 stage2 stage3 stage4
+ -rm -f gthr-default.h
-rm -f */stage1 */stage2 */stage3 */stage4 */include
-rm -f c-parse.output
-rm -f *.asm
-rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz
-rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
-rm -f *lose config/*lose config/*/*lose
- -rm -f *.s *.s[0-9] *.i install1.texi config/ChangeLog
+ -rm -f *.s *.s[0-9] *.i config/ChangeLog
-rm -f */=* */"#"* */*~*
-rm -f */patch* */*.orig */*.rej
-rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz
maintainer-clean:
@echo 'This command is intended for maintainers to use; it'
@echo 'deletes files that may need special tools to rebuild.'
- $(MAKE) distclean bytecode.maintainer-clean lang.maintainer-clean
+ $(MAKE) distclean lang.maintainer-clean
-rm -f c-parse.y c-gperf.h
-rm -f c-parse.c c-parse.h c-parse.output
-rm -f cexp.c cexp.output TAGS
if [ x"$$file" != x.. ]; then \
rm -f $(libsubdir)/$$file; \
$(INSTALL_DATA) $$file $(libsubdir)/$$file; \
+ chmod a-x $(libsubdir)/$$file; \
else true; fi; \
done
# Don't mess with specs if it doesn't exist yet.
-if [ -f specs ] ; then \
rm -f $(libsubdir)/specs; \
$(INSTALL_DATA) specs $(libsubdir)/specs; \
+ chmod a-x $(libsubdir)/specs; \
fi
# Install protoize if it was compiled.
-if [ -f protoize$(exeext) ]; \
# Install the driver program as $(target_alias)-gcc
# and also as either gcc (if native) or $(tooldir)/bin/gcc.
-install-driver: xgcc
+install-driver: xgcc$(exeext)
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
$(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
# to do the install. The sed rule was copied from stmp-int-hdrs.
install-info: doc installdirs lang.install-info
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
- for f in $(srcdir)/cpp.info* $(srcdir)/gcc.info*; do \
+ for f in cpp.info* gcc.info*; do \
realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$f $(infodir)/$$realfile; \
done
# Install the man pages.
install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
- -if [ -f gcc-cross ] ; then \
+ -if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(mandir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_CROSS_NAME)$(manext); \
chmod a-x $(mandir)/$(GCC_CROSS_NAME)$(manext); \
chmod a-x $(assertdir)/assert.h; \
fi
-# Use this target to install the program `collect2' under the name `ld'.
+# Use this target to install the program `collect2' under the name `collect2'.
install-collect2: collect2 installdirs
- $(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/ld$(exeext)
+ $(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/collect2$(exeext)
# Install the driver program as $(libsubdir)/gcc for collect2.
$(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)
echo "append LDFLAGS \" -L$(objdir)/../ld\"" >> ./tmp0; \
else true; \
fi
- @if [ $(build_canonical) != $(host_canonical) ] ; then \
- echo "set tmpdir /tmp" >> ./tmp0 ; \
- else echo "set tmpdir $(objdir)/testsuite" >> ./tmp0 ; \
- fi
+ echo "set tmpdir $(objdir)/testsuite" >> ./tmp0
@echo "set srcdir \"\$${srcdir}/testsuite\"" >> ./tmp0
@echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0
@cat ./tmp0 > site.exp
-e '1,/^## All variables above are.*##/ d' >> site.exp
-@rm -f ./tmp?
-CHECK_TARGETS = check-gcc check-g++
+CHECK_TARGETS = check-gcc check-g++ check-g77
check: $(CHECK_TARGETS)
export TCL_LIBRARY ; fi ; \
$(RUNTEST) --tool gcc $(RUNTESTFLAGS)
+check-g77: testsuite/site.exp
+ -rootme=`pwd`; export rootme; \
+ srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
+ cd testsuite; \
+ EXPECT=${EXPECT} ; export EXPECT ; \
+ if [ -f $${rootme}/../expect/expect ] ; then \
+ TCL_LIBRARY=$${srcdir}/../tcl/library ; \
+ export TCL_LIBRARY ; fi ; \
+ $(RUNTEST) --tool g77 $(RUNTESTFLAGS)
+
# These exist for maintenance purposes.
# Update the tags table.
TAGS: force
cd $(srcdir); \
- mkdir temp; \
- mv -f c-parse.[ch] objc-parse.c cexp.c =*.[chy] temp; \
+ mkdir tmp-tags; \
+ mv -f c-parse.[ch] cexp.c =*.[chy] tmp-tags; \
etags *.y *.h *.c; \
- mv temp/* .; \
- rmdir temp
+ mv tmp-tags/* .; \
+ rmdir tmp-tags
-# Create the distribution tar file.
-#dist: gcc-$(version).tar.gz
-dist: gcc.xtar.gz
+# Create the distribution tar.gz file.
+dist: tmp-gcc.xtar
+ gzip --best < tmp-gcc.xtar > tmp-gcc.xtar.gz
+ mv tmp-gcc.xtar.gz gcc-$(version).tar.gz
-gcc.xtar.gz: gcc.xtar
- gzip --best < gcc.xtar > tmp-gcc.xtar.gz
- mv tmp-gcc.xtar.gz gcc.xtar.gz
-
-#gcc-$(version).tar.gz: gcc-$(version).tar
-# gzip < gcc-$(version).tar > gcc-$(version).tar.gz
-
-#gcc-$(version).tar:
-gcc.xtar: distdir
+tmp-gcc.xtar: distdir
# Make the distribution.
- tar -chf gcc.xtar gcc-$(version)
+ tar -chf tmp-gcc.xtar gcc-$(version)
+
+distdir-cvs: force
+ if [ -d $(srcdir)/CVS ]; then cvs -r update; fi
# This target exists to do the initial work before the language specific
# stuff gets done.
distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
- $(srcdir)/objc-parse.y $(srcdir)/c-parse.c $(srcdir)/objc-parse.c \
- $(srcdir)/cexp.c
+ $(srcdir)/c-parse.c $(srcdir)/cexp.c $(srcdir)/config.in \
+ $(srcdir)/version.c TAGS
@if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
then true; \
else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
mkdir tmp
mkdir tmp/config
mkdir tmp/ginclude
- mkdir tmp/objc
for file in *[0-9a-zA-Z+]; do \
$(LN) $$file tmp; \
done
cd config; \
for file in *[0-9a-zA-Z+]; do \
- if test -d $$file && test "$$file" != RCS; then \
+ if test -d $$file && test "$$file" != RCS && test "$$file" != CVS; then \
mkdir ../tmp/config/$$file; \
cd $$file; \
for subfile in *[0-9a-zA-Z+]; do \
# Get rid of everything we don't want in the distribution. We'd want
# this to use Makefile.in, but it doesn't have the `lang.foo' targets
# expanded.
- cd gcc-$(version); make extraclean
+ cd gcc-$(version); make extraclean VERSION_DEP=
-distdir: distdir-start lang.distdir distdir-finish
+distdir: distdir-cvs distdir-start lang.distdir distdir-finish
# make diff oldversion=M.N
# creates a diff file between an older distribution and this one.
# The -P option assumes this is GNU diff.
diff:
diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
- -x cexp.c -x bi-parser.c -x objc-parse.y -x objc-parse.c \
- -x bi-parser.h -x TAGS \
+ -x cexp.c -x -x TAGS -x INSTALL \
+ -x configure -x config.in \
-x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
-x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
$(LANG_DIFF_EXCLUDES) \
- gcc-$(oldversion) gcc-$(version) > diffs
+ gcc-$(oldversion) gcc-$(version) > gcc-$(oldversion)-$(version).diff
-bootstrap: force
+bootstrap bootstrap-lean: force
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
# To prevent `make install' from compiling alloca.o and then relinking cc1
# because alloca.o is newer, we permit these recursive makes to compile
# alloca.o. Then cc1 is newer, so it won't have to be relinked.
- $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
+ $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
$(MAKE) stage2
- $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
+ -if test $@ = bootstrap-lean; then rm -rf stage1; else true; fi
+ $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
-bootstrap2: force
- $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
+bootstrap2 bootstrap2-lean: force
+ $(MAKE) CC="stage1/xgcc$(exeext) -Bstage1/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
$(MAKE) stage2
- $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
+ -if test $@ = bootstrap2-lean; then rm -rf stage1; else true; fi
+ $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
-bootstrap3: force
- $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
+bootstrap3 bootstrap3-lean: force
+ $(MAKE) CC="stage2/xgcc$(exeext) -Bstage2/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
+
+bootstrap4 bootstrap4-lean: force
+ $(MAKE) CC="stage3/xgcc$(exeext) -Bstage3/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)"
# Compare the object files in the current directory with those in the
# stage2 directory.
# ./ avoids bug in some versions of tail.
-compare: force
+compare compare3 compare4 compare-lean compare3-lean compare4-lean: force
-rm -f .bad_compare
+ case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
for file in *$(objext); do \
tail +16c ./$$file > tmp-foo1; \
- tail +16c stage2/$$file > tmp-foo2 \
+ tail +16c stage$$stage/$$file > tmp-foo2 \
&& (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
done
+ case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
for dir in tmp-foo $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
tail +16c ./$$file > tmp-foo1; \
- tail +16c stage2/$$file > tmp-foo2 \
+ tail +16c stage$$stage/$$file > tmp-foo2 \
&& (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
done; \
fi; \
done
-rm -f tmp-foo*
+ case "$@" in compare | compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac; \
if [ -f .bad_compare ]; then \
echo "Bootstrap comparison failure!"; \
cat .bad_compare; \
exit 1; \
- else true; \
+ else \
+ case "$@" in \
+ *-lean ) rm -rf stage$$stage ;; \
+ *) ;; \
+ esac; true; \
fi
-# Similar, but compare with stage3 directory
-compare3: force
- for file in *$(objext); do \
- tail +16c ./$$file > tmp-foo1; \
- tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
- && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
- done
- for dir in tmp-foo $(SUBDIRS); do \
- if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
- for file in $$dir/*$(objext); do \
- tail +16c ./$$file > tmp-foo1; \
- tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
- && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
- done; \
- fi; \
- done
- -rm -f tmp-foo*
-
# Compare the object files in the current directory with those in the
# stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
# running tail and the overhead of twice copying each object file.
-gnucompare: force
- for file in *$(objext); do \
- cmp --ignore-initial=16 $$file stage2/$$file || true ; \
- done
- for dir in tmp-foo $(SUBDIRS); do \
- if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
- for file in $$dir/*$(objext); do \
- cmp --ignore-initial=16 $$file stage2/$$file || true ; \
- done; \
- fi; \
- done
-
-# Similar, but compare with stage3 directory
-gnucompare3: force
+gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force
+ -rm -f .bad_compare
+ case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
for file in *$(objext); do \
- cmp --ignore-initial=16 $$file stage3/$$file || true ; \
+ (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
done
+ case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
for dir in tmp-foo $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
- cmp --ignore-initial=16 $$file stage3/$$file || true ; \
+ (cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \
done; \
fi; \
done
+ case "$@" in gnucompare | gnucompare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac; \
+ if [ -f .bad_compare ]; then \
+ echo "Bootstrap comparison failure!"; \
+ cat .bad_compare; \
+ exit 1; \
+ else \
+ case "$@" in \
+ *-lean ) rm -rf stage$$stage ;; \
+ esac; true; \
+ fi
# Copy the object files from a particular stage into a subdirectory.
stage1-start:
.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
force:
+
+# ---
+# The enquire rules are still useful for building new float-anything.h.
+# Special flags for compiling enquire.
+# We disable optimization to make floating point more reliable.
+ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
+ENQUIRE_LDFLAGS = $(LDFLAGS)
+
+# Enquire target (This is a variable so that a target can choose not to
+# build it.)
+ENQUIRE = enquire
+
+# Test to see whether <float.h> exists in the system header files,
+# and is not derived from GCC.
+FLOAT_H_TEST = \
+ [ -f $(SYSTEM_HEADER_DIR)/float.h ] && \
+ if grep 'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR)/float.h >/dev/null; \
+ then false; \
+ else :; fi
+# We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
+# to ensure, we're emitting a full blown <float.h> ourselves.
+FLOAT_H_TEST = false
+
+# Used to compile enquire with standard cc, but have forgotten why.
+# Let's try with GCC.
+enquire: enquire.o $(GCC_PARTS)
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
+enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
+ if $(FLOAT_H_TEST); then \
+ rm -f include/float.h; \
+ SYS_FLOAT_H_WRAP=1; \
+ else :; \
+ SYS_FLOAT_H_WRAP=0; \
+ fi; \
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) \
+ -DSYS_FLOAT_H_WRAP=$$SYS_FLOAT_H_WRAP \
+ -I. -c $(srcdir)/enquire.c
+
+# Create float.h source for the native machine.
+# Make it empty if we can use the system float.h without changes.
+float.h-nat: enquire
+ -./enquire -f > tmp-float.h
+ grep '#define [^_]' tmp-float.h >/dev/null || true > tmp-float.h
+ mv tmp-float.h float.h-nat
+
+# Create a dummy float.h source for a cross-compiler.
+# ??? This isn't used anymore. Should we create config/float-unkn.h
+# and make that the default float_format in configure?
+float.h-cross:
+ echo "#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
+ echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
+ echo "#endif" >> t-float.h-cross
+ mv t-float.h-cross float.h-cross
+
OSDN Git Service
