# Makefile for GNU C compiler.
# Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
-# 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+# 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
#This file is part of GCC.
# Pointer to the GCC Project website
website=http://gcc.gnu.org
+# These directories contain files that are provided as part of a FSF tarball,
+# but not provided in CVS. Some GCC integrators like to use the CVS sources
+# but keep them read-only during a build, and so change these variables
+# from these defaults.
+parsedir = $(srcdir)
+docobjdir = $(srcdir)/doc
+
# Variables that exist for you to override.
# See below for how to change them for certain systems.
# This is how we control whether or not the additional warnings are applied.
.-warn = $(STRICT_WARN)
-GCC_WARN_CFLAGS = $(LOOSE_WARN) $($(@D)-warn) $(NOCOMMON_FLAG)
+GCC_WARN_CFLAGS = $(LOOSE_WARN) $($(@D)-warn) $(NOCOMMON_FLAG) $(WERROR) $($@-warn)
+
+# These files are to have -Werror bypassed in stage2:
+# These are very hard to completely clean due to target complexities.
+varasm.o-warn = -Wno-error
+gcc.o-warn = -Wno-error
+insn-conditions.o-warn = -Wno-error
+@out_object_file@-warn = -Wno-error
+# Bison-1.75 output often yields (harmless) -Wtraditional warnings
+gengtype-yacc.o-warn = -Wno-error
+c-parse.o-warn = -Wno-error
# All warnings have to be shut off in stage1 if the compiler used then
# isn't gcc; configure determines that. WARN_CFLAGS will be either
echo $(objdir)/../binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target)" ] ; then \
- echo ranlib; \
+ echo $(RANLIB); \
else \
t='$(program_transform_cross_name)'; echo ranlib | sed -e $$t ; \
fi; \
fi`
-RANLIB_TEST_FOR_TARGET = \
- [ -f $(RANLIB_FOR_TARGET) ] \
- || ( [ "$(host_canonical)" = "$(target)" ] \
- && [ -f /usr/bin/ranlib -o -f /bin/ranlib ] )
NM_FOR_TARGET = ` \
if [ -f ./nm ] ; then \
echo ./nm ; \
OBSTACK_H = $(srcdir)/../include/obstack.h
SPLAY_TREE_H= $(srcdir)/../include/splay-tree.h
FIBHEAP_H = $(srcdir)/../include/fibheap.h
+PARTITION_H = $(srcdir)/../include/partition.h
# Default native SYSTEM_HEADER_DIR, to be overridden by targets.
NATIVE_SYSTEM_HEADER_DIR = /usr/include
GCC_THREAD_FILE=@thread_file@
OBJC_BOEHM_GC=@objc_boehm_gc@
GTHREAD_FLAGS=@gthread_flags@
+host_hook_obj=@out_host_hook_obj@
# Be prepared for gcc2 merges.
gcc_version=@gcc_version@
gcc_version_trigger=@gcc_version_trigger@
T_TARGET =
T_TARGET : $(T_TARGET)
+# This should name the specs file that we're going to install. Target
+# Makefiles may override it and name another file to be generated from
+# the built-in specs and installed as the default spec, as long as
+# they also introduce a rule to generate a file name specs, to be used
+# at build time.
+SPECS = specs
+
# End of variables for you to override.
# Definition of `all' is here so that new rules inserted by sed
PARAMS_H = params.h params.def
TREE_H = tree.h tree.def $(MACHMODE_H) tree-check.h version.h builtins.def \
location.h
-BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h
+BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h $(PARTITION_H) \
+ hard-reg-set.h
DEMANGLE_H = $(srcdir)/../include/demangle.h
RECOG_H = recog.h
EXPR_H = expr.h
INTEGRATE_H = integrate.h varray.h
LOOP_H = loop.h varray.h bitmap.h
GCC_H = gcc.h version.h
-GGC_H = ggc.h varray.h gtype-desc.h
+GGC_H = ggc.h gtype-desc.h
TIMEVAR_H = timevar.h timevar.def
INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h
C_COMMON_H = c-common.h $(SPLAY_TREE_H) $(CPPLIB_H)
"BISON=$(BISON)" \
"BISONFLAGS=$(BISONFLAGS)" \
"CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
+ "DESTDIR=$(DESTDIR)" \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"LDFLAGS=$(LDFLAGS)" \
"FLEX=$(FLEX)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
"MAKEOVERRIDES=" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
- "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"exeext=$(exeext)" \
"build_exeext=$(build_exeext)" \
# Language-specific object files for C and Objective C.
C_AND_OBJC_OBJS = attribs.o c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
c-convert.o c-aux-info.o c-common.o c-opts.o c-format.o c-semantics.o \
- c-objc-common.o c-dump.o libcpp.a $(C_TARGET_OBJS)
+ c-objc-common.o c-dump.o c-pch.o libcpp.a $(C_TARGET_OBJS)
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o c-pretty-print.o $(C_AND_OBJC_OBJS)
OBJS = alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfglayout.o cfgloop.o \
+ cfgloopanal.o cfgloopmanip.o loop-init.o loop-unswitch.o \
cfgrtl.o combine.o conflict.o convert.o cse.o cselib.o dbxout.o \
debug.o df.o diagnostic.o doloop.o dominance.o \
dwarf2asm.o dwarf2out.o dwarfout.o emit-rtl.o except.o explow.o \
genrtl.o ggc-common.o global.o graph.o gtype-desc.o \
haifa-sched.o hashtable.o hooks.o ifcvt.o insn-attrtab.o insn-emit.o \
insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \
- integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
+ integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \
loop.o mbchar.o optabs.o params.o predict.o print-rtl.o print-tree.o \
profile.o ra.o ra-build.o ra-colorize.o ra-debug.o ra-rewrite.o \
real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \
reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o rtl-error.o \
sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \
- sibcall.o simplify-rtx.o ssa.o ssa-ccp.o ssa-dce.o stmt.o \
+ sibcall.o simplify-rtx.o sreal.o ssa.o ssa-ccp.o ssa-dce.o stmt.o \
stor-layout.o stringpool.o timevar.o toplev.o tracer.o tree.o tree-dump.o \
tree-inline.o unroll.o varasm.o varray.o version.o vmsdbgout.o xcoffout.o \
- et-forest.o $(GGC) $(out_object_file) $(EXTRA_OBJS)
+ alloc-pool.o et-forest.o \
+ $(GGC) $(out_object_file) $(EXTRA_OBJS) $(host_hook_obj)
BACKEND = main.o libbackend.a
xgcc$(exeext) cpp$(exeext) cc1$(exeext) $(EXTRA_PASSES) \
$(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) cc1obj$(exeext) \
protoize$(exeext) unprotoize$(exeext) \
- specs collect2$(exeext) $(USE_COLLECT2) \
+ $(SPECS) collect2$(exeext) $(USE_COLLECT2) \
gcov-iov$(build_exeext) gcov$(exeext) gcov-dump$(exeext) \
*.[0-9][0-9].* *.[si] libcpp.a libbackend.a libgcc.mk \
$(LANG_STAGESTUFF)
-# Library members defined in libgcc2.c.
-# Variable length limited to 255 charactes when passed to a shell script.
-LIB2FUNCS_1 = _muldi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 _clz \
- _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi _fixunssfsi \
- _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi
-
-LIB2FUNCS_2 = _floatdixf _fixunsxfsi _fixtfdi _fixunstfdi _floatditf \
- _clear_cache _trampoline __main _exit _absvsi2 _absvdi2 _addvsi3 \
- _addvdi3 _subvsi3 _subvdi3 _mulvsi3 _mulvdi3 _negvsi2 _negvdi2 _ctors
-
# Defined in libgcc2.c, included only in the static library.
-LIB2FUNCS_ST = _eprintf _gcov __gcc_bcmp
+LIB2FUNCS_ST = _eprintf __gcc_bcmp
+
+# Defined in libgcov.c, included only in gcov library
+LIBGCOV = _gcov
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
_lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
- _sf_to_df _thenan_sf _sf_to_usi _usi_to_sf
+ _sf_to_df _sf_to_tf _thenan_sf _sf_to_usi _usi_to_sf
DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
_fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
_lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
- _df_to_sf _thenan_df _df_to_usi _usi_to_df
+ _df_to_sf _df_to_tf _thenan_df _df_to_usi _usi_to_df
+
+TPBIT_FUNCS = _pack_tf _unpack_tf _addsub_tf _mul_tf _div_tf \
+ _fpcmp_parts_tf _compare_tf _eq_tf _ne_tf _gt_tf _ge_tf \
+ _lt_tf _le_tf _unord_tf _si_to_tf _tf_to_si _negate_tf _make_tf \
+ _tf_to_df _tf_to_sf _thenan_tf _tf_to_usi _usi_to_tf
# These might cause a divide overflow trap and so are compiled with
# unwinder info.
prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
# Dump a specs file to make -B./ read these specs over installed ones.
-specs: xgcc$(exeext)
+$(SPECS): xgcc$(exeext)
$(GCC_FOR_TARGET) -dumpspecs > tmp-specs
- mv tmp-specs specs
+ mv tmp-specs $(SPECS)
# We do want to create an executable named `xgcc', so we can use it to
# compile libgcc2.a.
libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) $(LIB2ADD_ST) xgcc$(exeext) specs
objext='$(objext)' \
LIB1ASMFUNCS='$(LIB1ASMFUNCS)' \
- LIB2FUNCS_1='$(LIB2FUNCS_1)' \
- LIB2FUNCS_2='$(LIB2FUNCS_2)' \
LIB2FUNCS_ST='$(LIB2FUNCS_ST)' \
+ LIBGCOV='$(LIBGCOV)' \
LIB2ADD='$(LIB2ADD)' \
LIB2ADD_ST='$(LIB2ADD_ST)' \
LIB2ADDEH='$(LIB2ADDEH)' \
LIB2_DIVMOD_FUNCS='$(LIB2_DIVMOD_FUNCS)' \
DPBIT='$(DPBIT)' \
DPBIT_FUNCS='$(DPBIT_FUNCS)' \
+ TPBIT='$(TPBIT)' \
+ TPBIT_FUNCS='$(TPBIT_FUNCS)' \
MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \
EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \
SHLIB_LINK='$(SHLIB_LINK)' \
# All the things that might cause us to want to recompile bits of libgcc.
LIBGCC_DEPS = $(GCC_PASSES) $(LANGUAGES) stmp-int-hdrs $(STMP_FIXPROTO) \
- libgcc.mk $(srcdir)/libgcc2.c $(TCONFIG_H) \
+ libgcc.mk $(srcdir)/libgcc2.c $(srcdir)/libgcov.c $(TCONFIG_H) \
$(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs \
- tsystem.h $(FPBIT) $(DPBIT) $(LIB2ADD) $(LIB2ADD_ST) $(LIB2ADDEH) \
- $(LIB2ADDEHDEP) $(EXTRA_PARTS) $(srcdir)/config/$(LIB1ASMSRC)
+ tsystem.h $(FPBIT) $(DPBIT) $(TPBIT) $(LIB2ADD) \
+ $(LIB2ADD_ST) $(LIB2ADDEH) $(LIB2ADDEHDEP) $(EXTRA_PARTS) \
+ $(srcdir)/config/$(LIB1ASMSRC)
+
+libgcov.a: libgcc.a; @true
libgcc.a: $(LIBGCC_DEPS)
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
- RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
- RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" \
c-errors.o: c-errors.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(C_TREE_H) flags.h diagnostic.h $(TM_P_H)
-c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
+c-parse.o : $(parsedir)/c-parse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(GGC_H) intl.h $(C_TREE_H) input.h flags.h toplev.h output.h $(CPPLIB_H) \
- gt-c-parse.h
+ varray.h gt-c-parse.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -c $(srcdir)/c-parse.c $(OUTPUT_OPTION)
+ -c $(parsedir)/c-parse.c $(OUTPUT_OPTION)
-$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
- cd $(srcdir) && \
+$(parsedir)/c-parse.c: $(parsedir)/c-parse.y
+ cd $(parsedir) && \
if $(BISON) $(BISONFLAGS) -o c-p$$$$.c c-parse.y; then \
test -f c-p$$$$.output && mv -f c-p$$$$.output c-parse.output ; \
mv -f c-p$$$$.c c-parse.c ; \
false ; \
fi
-$(srcdir)/c-parse.y: c-parse.in
+$(parsedir)/c-parse.y: c-parse.in
echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
-e "/^ifc$$/d" -e "/^end ifc$$/d" \
$(srcdir)/c-parse.in >>tmp-c-parse.y
- $(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
+ $(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $(parsedir)/c-parse.y
c-decl.o : c-decl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
$(C_TREE_H) $(GGC_H) $(TARGET_H) flags.h function.h output.h $(EXPR_H) \
c-aux-info.o : c-aux-info.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(C_TREE_H) flags.h toplev.h
c-convert.o : c-convert.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
- flags.h toplev.h $(C_COMMON_H)
+ flags.h toplev.h $(C_COMMON_H) real.h
c-pragma.o: c-pragma.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
function.h c-pragma.h toplev.h output.h $(GGC_H) $(TM_P_H) $(C_COMMON_H) gt-c-pragma.h
mbchar.o: mbchar.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) mbchar.h
c-common.o : c-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(OBSTACK_H) $(C_COMMON_H) flags.h toplev.h output.h c-pragma.h $(RTL_H) \
$(GGC_H) $(EXPR_H) $(TM_P_H) builtin-types.def builtin-attrs.def $(TARGET_H) \
- diagnostic.h except.h gt-c-common.h real.h langhooks.h
+ diagnostic.h except.h gt-c-common.h real.h langhooks.h varray.h
c-pretty-print.o : c-pretty-print.c c-pretty-print.h pretty-print.h \
$(C_COMMON_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) real.h
c-dump.o : c-dump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(C_TREE_H) tree-dump.h
+c-pch.o : c-pch.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(CPPLIB_H) $(TREE_H) \
+ c-common.h output.h toplev.h c-pragma.h $(GGC_H) debug.h
+
# Language-independent files.
DRIVER_DEFINES = \
libfuncs.h debug.h $(GGC_H) bitmap.h $(BASIC_BLOCK_H) hard-reg-set.h \
ssa.h cselib.h insn-addr.h
-ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
- flags.h $(GGC_H) varray.h $(HASHTAB_H) $(TM_P_H) langhooks.h \
- $(PARAMS_H)
+ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GGC_H) \
+ $(HASHTAB_H) toplev.h
ggc-simple.o: ggc-simple.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h $(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H)
ggc-page.o: ggc-page.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
- flags.h toplev.h $(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H)
+ flags.h toplev.h $(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H)
-stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
- $(OBSTACK_H) flags.h toplev.h $(GGC_H)
+stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ $(TREE_H) $(GGC_H) gt-stringpool.h
hashtable.o: hashtable.c hashtable.h $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(OBSTACK_H)
dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) $(lang_options_files) \
ssa.h $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) \
- langhooks.h insn-flags.h options.h cfglayout.h real.h
+ langhooks.h insn-flags.h options.h cfglayout.h real.h cfgloop.h hosthooks.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_NAME=\"$(target_alias)\" \
-c $(srcdir)/toplev.c $(OUTPUT_OPTION)
main.o : main.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h
+host-default.o : host-default.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
+ hosthooks.h hosthooks-def.h
+
rtl-error.o: rtl-error.c $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(INSN_ATTR_H) \
insn-config.h input.h toplev.h intl.h diagnostic.h $(CONFIG_H)
stmt.o : stmt.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \
function.h insn-config.h hard-reg-set.h $(EXPR_H) libfuncs.h except.h \
$(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H) $(TM_P_H) \
- langhooks.h $(PREDICT_H) gt-stmt.h
+ langhooks.h $(PREDICT_H) gt-stmt.h $(OPTABS_H)
except.o : except.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h except.h function.h $(EXPR_H) libfuncs.h integrate.h langhooks.h \
insn-config.h hard-reg-set.h $(BASIC_BLOCK_H) output.h \
toplev.h function.h ggc.h $(TM_P_H) gt-explow.h
optabs.o : optabs.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h insn-config.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(RECOG_H) reload.h \
- toplev.h $(GGC_H) real.h $(TM_P_H) except.h gt-optabs.h
+ toplev.h $(GGC_H) real.h $(TM_P_H) except.h gt-optabs.h $(BASIC_BLOCK_H)
dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
flags.h $(REGS_H) debug.h $(TM_P_H) $(TARGET_H) function.h langhooks.h \
- insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h
+ insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h \
+ $(GGC_H) gt-dbxout.h
debug.o : debug.c debug.h $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H)
sdbout.o : sdbout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
flags.h function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) real.h \
- insn-config.h xcoffout.h c-pragma.h ggc.h $(TARGET_H) \
+ insn-config.h xcoffout.h c-pragma.h $(GGC_H) $(TARGET_H) \
sdbout.h toplev.h $(TM_P_H) except.h debug.h langhooks.h gt-sdbout.h
dwarfout.o : dwarfout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(RTL_H) dwarf.h flags.h insn-config.h reload.h output.h toplev.h $(TM_P_H) \
- debug.h langhooks.h
+ debug.h langhooks.h $(TARGET_H)
dwarf2out.o : dwarf2out.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(RTL_H) dwarf2.h debug.h flags.h insn-config.h reload.h output.h diagnostic.h real.h \
hard-reg-set.h $(REGS_H) $(EXPR_H) libfuncs.h toplev.h dwarf2out.h varray.h \
- $(GGC_H) except.h dwarf2asm.h $(TM_P_H) langhooks.h $(HASHTAB_H) gt-dwarf2out.h
+ $(GGC_H) except.h dwarf2asm.h $(TM_P_H) langhooks.h $(HASHTAB_H) \
+ gt-dwarf2out.h $(TARGET_H)
dwarf2asm.o : dwarf2asm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) flags.h $(RTL_H) \
- $(TREE_H) output.h dwarf2asm.h $(TM_P_H) $(GGC_H)
+ $(TREE_H) output.h dwarf2asm.h $(TM_P_H) $(GGC_H) gt-dwarf2asm.h
vmsdbgout.o : vmsdbgout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(RTL_H) flags.h output.h vmsdbg.h debug.h langhooks.h function.h $(TARGET_H)
xcoffout.o : xcoffout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
simplify-rtx.o : simplify-rtx.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(REGS_H) hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
- output.h function.h $(GGC_H) $(OBSTACK_H) $(TM_P_H) $(TREE_H)
+ output.h function.h $(GGC_H) $(OBSTACK_H) $(TM_P_H) $(TREE_H) $(TARGET_H)
cselib.o : cselib.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
output.h function.h cselib.h $(GGC_H) $(TM_P_H) gt-cselib.h
cse.o : cse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
- hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h \
- function.h $(BASIC_BLOCK_H) $(GGC_H) $(TM_P_H) $(TIMEVAR_H)
+ hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
+ output.h function.h $(BASIC_BLOCK_H) $(GGC_H) $(TM_P_H) $(TIMEVAR_H) \
+ except.h $(TARGET_H)
gcse.o : gcse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h ggc.h $(RECOG_H) $(EXPR_H) \
$(BASIC_BLOCK_H) function.h output.h toplev.h $(TM_P_H) $(PARAMS_H) except.h gt-gcse.h
$(BASIC_BLOCK_H) output.h ssa.h
ssa-dce.o : ssa-dce.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) hard-reg-set.h \
$(BASIC_BLOCK_H) ssa.h insn-config.h $(RECOG_H) output.h
-ssa-ccp.o : ssa-ccp.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+ssa-ccp.o : ssa-ccp.c $(CONFIG_H) system.h coretypes.h $(TM_H) $(RTL_H) hard-reg-set.h \
$(BASIC_BLOCK_H) ssa.h insn-config.h $(RECOG_H) output.h \
errors.h $(GGC_H) df.h function.h
-df.o : df.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) coretypes.h $(TM_H) $(RTL_H) \
+df.o : df.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
insn-config.h $(RECOG_H) function.h $(REGS_H) $(OBSTACK_H) hard-reg-set.h \
$(BASIC_BLOCK_H) df.h $(FIBHEAP_H)
conflict.o : conflict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(OBSTACK_H) \
$(TARGET_H) langhooks.h profile.h libfuncs.h gt-profile.h $(HASHTAB_H)
loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h $(LOOP_H) \
insn-config.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) \
- real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h \
+ real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h cfgloop.h \
toplev.h varray.h except.h cselib.h $(OPTABS_H) $(TM_P_H)
doloop.o : doloop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
- $(LOOP_H) $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) toplev.h
+ $(LOOP_H) $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) toplev.h \
+ cfgloop.h
unroll.o : unroll.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) insn-config.h \
function.h $(INTEGRATE_H) $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) $(LOOP_H) toplev.h \
- hard-reg-set.h varray.h $(BASIC_BLOCK_H) $(TM_P_H) $(PREDICT_H) $(PARAMS_H)
+ hard-reg-set.h varray.h $(BASIC_BLOCK_H) $(TM_P_H) $(PREDICT_H) $(PARAMS_H) \
+ cfgloop.h
+alloc-pool.o : alloc-pool.c $(CONFIG_H) $(SYSTEM_H) alloc-pool.h
flow.o : flow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
$(RECOG_H) function.h except.h $(EXPR_H) ssa.h $(GGC_H) $(TM_P_H)
cfg.o : cfg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
- function.h except.h $(GGC_H) $(TM_P_H)
+ function.h except.h $(GGC_H) $(TM_P_H) alloc-pool.h
cfgrtl.o : cfgrtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
function.h except.h $(GGC_H) $(TM_P_H) insn-config.h
cfgcleanup.o : cfgcleanup.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(TIMEVAR_H) $(BASIC_BLOCK_H) hard-reg-set.h output.h flags.h $(RECOG_H) toplev.h \
$(GGC_H) insn-config.h cselib.h $(TARGET_H) $(TM_P_H)
-cfgloop.o : cfgloop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
- $(BASIC_BLOCK_H) hard-reg-set.h
+cfgloop.o : cfgloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) coretypes.h $(TM_H) \
+ $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h flags.h
+cfgloopanal.o : cfgloopanal.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
+ $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h $(EXPR_H) coretypes.h $(TM_H)
+cfgloopmanip.o : cfgloopmanip.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \
+ $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h output.h coretypes.h $(TM_H)
+loop-init.o : loop-init.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) gcov-io.h \
+ gcov-iov.h $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h profile.h \
+ coretypes.h $(TM_H)
+loop-unswitch.o : loop-unswitch.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TM_H) \
+ $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h params.h \
+ output.h $(EXPR_H) coretypes.h $(TM_H)
dominance.o : dominance.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
hard-reg-set.h $(BASIC_BLOCK_H) et-forest.h
-et-forest.o : et-forest.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) et-forest.h
+et-forest.o : et-forest.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) et-forest.h alloc-pool.h
combine.o : combine.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \
function.h insn-config.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
$(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h $(TM_P_H)
reg-stack.o : reg-stack.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
$(RECOG_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h toplev.h reload.h \
varray.h function.h $(TM_P_H) $(GGC_H) gt-reg-stack.h
+sreal.o: sreal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) sreal.h
predict.o: predict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
- $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H) $(PREDICT_H) real.h \
- $(PARAMS_H) $(TARGET_H)
+ $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H) $(PREDICT_H) sreal.h \
+ $(PARAMS_H) $(TARGET_H) cfgloop.h
lists.o: lists.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h $(RTL_H) $(GGC_H)
-bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
- $(TREE_H) flags.h $(BASIC_BLOCK_H) hard-reg-set.h output.h cfglayout.h $(TARGET_H)
+bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ $(RTL_H) $(BASIC_BLOCK_H) flags.h output.h cfglayout.h $(FIBHEAP_H) \
+ $(TARGET_H)
tracer.o : tracer.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
$(BASIC_BLOCK_H) hard-reg-set.h output.h cfglayout.h flags.h \
$(PARAMS_H) profile.h
cfglayout.o : cfglayout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
insn-config.h $(BASIC_BLOCK_H) hard-reg-set.h output.h function.h \
- cfglayout.h
+ cfglayout.h cfgloop.h
timevar.o : timevar.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TIMEVAR_H) flags.h \
- intl.h
+ intl.h toplev.h
regrename.o : regrename.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \
resource.h $(OBSTACK_H) flags.h $(TM_P_H)
$(SHELL) $(srcdir)/move-if-change tmp-preds.h tm-preds.h
$(STAMP) s-preds
-GTFILES = $(srcdir)/location.h $(srcdir)/coretypes.h \
- $(host_xm_file_list) $(tm_file_list) $(HASHTAB_H) \
+GTFILES = $(srcdir)/location.h $(srcdir)/coretypes.h $(srcdir)/cpplib.h \
+ $(host_xm_file_list) $(tm_file_list) $(HASHTAB_H) $(SPLAY_TREE_H) \
$(srcdir)/bitmap.h $(srcdir)/function.h $(srcdir)/rtl.h $(srcdir)/optabs.h \
$(srcdir)/tree.h $(srcdir)/libfuncs.h $(srcdir)/hashtable.h $(srcdir)/real.h \
$(srcdir)/varray.h $(srcdir)/ssa.h $(srcdir)/insn-addr.h $(srcdir)/cselib.h \
+ $(srcdir)/basic-block.h $(srcdir)/location.h \
$(srcdir)/c-common.h $(srcdir)/c-tree.h \
- $(srcdir)/basic-block.h \
$(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c \
- $(srcdir)/dwarf2out.c $(srcdir)/emit-rtl.c \
- $(srcdir)/except.c $(srcdir)/explow.c $(srcdir)/expr.c \
+ $(srcdir)/dbxout.c $(srcdir)/dwarf2out.c $(srcdir)/dwarf2asm.c \
+ $(srcdir)/emit-rtl.c $(srcdir)/except.c $(srcdir)/explow.c $(srcdir)/expr.c \
$(srcdir)/fold-const.c $(srcdir)/function.c \
$(srcdir)/gcse.c $(srcdir)/integrate.c $(srcdir)/lists.c $(srcdir)/optabs.c \
$(srcdir)/profile.c $(srcdir)/ra-build.c $(srcdir)/regclass.c \
$(srcdir)/reg-stack.c \
$(srcdir)/sdbout.c $(srcdir)/stmt.c $(srcdir)/stor-layout.c \
- $(srcdir)/tree.c $(srcdir)/varasm.c \
+ $(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
$(out_file) \
@all_gtfiles@
gt-explow.h gt-stor-layout.h gt-regclass.h gt-lists.h : s-gtype; @true
gt-alias.h gt-cselib.h gt-fold-const.h gt-gcse.h gt-profile.h : s-gtype; @true
gt-expr.h gt-sdbout.h gt-optabs.h gt-bitmap.h gt-dwarf2out.h : s-gtype ; @true
-gt-ra-build.h gt-reg-stack.h : s-gtype ; @true
+gt-ra-build.h gt-reg-stack.h gt-dwarf2asm.h gt-dbxout.h : s-gtype ; @true
gt-c-common.h gt-c-decl.h gt-c-parse.h gt-c-pragma.h : s-gtype; @true
-gt-c-objc-common.h gtype-c.h gt-location.h : s-gtype ; @true
+gt-c-objc-common.h gtype-c.h gt-location.h gt-stringpool.h : s-gtype ; @true
gtyp-gen.h: Makefile
echo "/* This file is machine generated. Do not edit. */" > tmp-gtyp.h
- echo "static const char *srcdir = " >> tmp-gtyp.h
+ echo "static const char *const srcdir = " >> tmp-gtyp.h
echo "\"$(GTFILES_SRCDIR)\"" >> tmp-gtyp.h
echo ";" >> tmp-gtyp.h
- echo "static const char *lang_files[] = {" >> tmp-gtyp.h
+ echo "static const char *const lang_files[] = {" >> tmp-gtyp.h
ll="$(GTFILES_FILES_FILES)"; \
for f in $$ll; do \
echo "\"$$f\", "; done >> tmp-gtyp.h
echo "NULL};" >> tmp-gtyp.h
- echo "static const char *langs_for_lang_files[] = {" >> tmp-gtyp.h
+ echo "static const char *const langs_for_lang_files[] = {" >> tmp-gtyp.h
ff="$(GTFILES_FILES_LANGS)"; \
for f in $$ff; do \
echo "\"$$f\", " ; done >> tmp-gtyp.h
echo "NULL};" >> tmp-gtyp.h
- echo "static const char *all_files[] = {" >> tmp-gtyp.h
+ echo "static const char *const all_files[] = {" >> tmp-gtyp.h
gf="$(GTFILES)"; \
for f in $$gf; do \
echo "\"$$f\", "; done >> tmp-gtyp.h
echo " NULL};" >> tmp-gtyp.h
- echo "static const char *lang_dir_names[] = { \"c\", " >> tmp-gtyp.h
+ echo "static const char *const lang_dir_names[] = { \"c\", " >> tmp-gtyp.h
gf="$(GTFILES_LANG_DIR_NAMES)"; \
for l in $$gf; do \
echo "\"$$l\", "; done >> tmp-gtyp.h
$(BUILD_CC) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
$(srcdir)/gengtype.c $(OUTPUT_OPTION)
-gengtype-lex.o : $(srcdir)/gengtype-lex.c gengtype.h $(srcdir)/gengtype-yacc.c \
+gengtype-lex.o : $(parsedir)/gengtype-lex.c gengtype.h $(parsedir)/gengtype-yacc.c \
$(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H)
$(BUILD_CC) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/gengtype-lex.c $(OUTPUT_OPTION)
+ $(parsedir)/gengtype-lex.c $(OUTPUT_OPTION)
-gengtype-yacc.o : $(srcdir)/gengtype-yacc.c gengtype.h $(BCONFIG_H) $(SYSTEM_H) \
+gengtype-yacc.o : $(parsedir)/gengtype-yacc.c gengtype.h $(BCONFIG_H) $(SYSTEM_H) \
coretypes.h $(GTM_H)
$(BUILD_CC) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \
- $(srcdir)/gengtype-yacc.c $(OUTPUT_OPTION)
+ $(parsedir)/gengtype-yacc.c $(OUTPUT_OPTION)
# The sed command works around a bug in flex-2.5.4.
-$(srcdir)/gengtype-lex.c : $(srcdir)/gengtype-lex.l
- cd $(srcdir) && \
- $(FLEX) $(FLEXFLAGS) -t -o$@ gengtype-lex.l | \
+$(parsedir)/gengtype-lex.c : $(srcdir)/gengtype-lex.l
+ $(FLEX) $(FLEXFLAGS) -t -o- $(srcdir)/gengtype-lex.l | \
sed 's/^\(char msg\[\];\)/yyconst \1/' > g-$$$$ ; \
if test $$? -eq 0 ; then \
- mv -f g-$$$$ gengtype-lex.c ; \
+ mv -f g-$$$$ $(parsedir)/gengtype-lex.c ; \
else \
- rm -f g-$$$$.* ; \
+ rm -f g-$$$$ ; \
false ; \
fi
-$(srcdir)/gengtype-yacc.c: $(srcdir)/gengtype-yacc.y
- (cd $(srcdir) && \
- $(BISON) $(BISONFLAGS) -d -o gengtype-yacc.c gengtype-yacc.y || \
- ( rm -f $@ && false ) )
+$(parsedir)/gengtype-yacc.c: $(srcdir)/gengtype-yacc.y
+ if $(BISON) $(BISONFLAGS) -d -o g-yacc.$$$$.c $(srcdir)/gengtype-yacc.y; then \
+ mv -f g-yacc.$$$$.h $(parsedir)/gengtype-yacc.h; \
+ mv -f g-yacc.$$$$.c $(parsedir)/gengtype-yacc.c; \
+ else \
+ rm -f g-yacc.$$$$.*; \
+ false; \
+ fi
genconditions$(build_exeext) : genconditions.o $(BUILD_EARLY_SUPPORT) \
$(BUILD_RTL) $(BUILD_ERRORS) $(BUILD_LIBDEPS)
# Make-lang.in should add dependencies of po-generated on any generated
# files which need to be scanned by gettext (usually Yacc-generated parsers).
-po-generated: c-parse.c
+po-generated: $(parsedir)/c-parse.c
#\f
# Remake cpp and protoize.
LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o cpptrad.o \
cpphash.o cpperror.o cppinit.o cppdefault.o cppmain.o \
- hashtable.o line-map.o mkdeps.o prefix.o mbchar.o
+ hashtable.o line-map.o mkdeps.o prefix.o mbchar.o cpppch.o
LIBCPP_DEPS = $(CPPLIB_H) cpphash.h line-map.h hashtable.h intl.h \
$(OBSTACK_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H)
cpptrad.o: cpptrad.c $(LIBCPP_DEPS)
cppfiles.o: cppfiles.c $(LIBCPP_DEPS) $(SPLAY_TREE_H) mkdeps.h
cppinit.o: cppinit.c $(LIBCPP_DEPS) cppdefault.h mkdeps.h prefix.h
+cpppch.o: cpppch.c $(LIBCPP_DEPS) mkdeps.h
cppdefault.o: cppdefault.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) cppdefault.h \
Makefile
gcov-iov$(build_exeext): gcov-iov.o
$(BUILD_CC) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) gcov-iov.o -o $@
gcov-iov.h: gcov-iov$(build_exeext)
- ./$< > $@
+ ./gcov-iov$(build_exeext) > $@
gcov.o: gcov.c gcov-io.h gcov-iov.h intl.h $(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H)
gcov-dump.o: gcov-dump.c gcov-io.h gcov-iov.h $(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H)
.PHONY: install-gcc-tooldir
install-gcc-tooldir:
- $(SHELL) ${srcdir}/mkinstalldirs $(gcc_tooldir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(gcc_tooldir)
# Build fixed copies of system files.
stmp-fixinc: fixinc.sh gsyslimits.h
docdir = $(srcdir)/doc
doc: $(BUILD_INFO) $(GENERATED_MANPAGES) gccbug
-info: $(docdir)/cpp.info $(docdir)/gcc.info $(docdir)/gccint.info $(docdir)/gccinstall.info lang.info $(docdir)/cppinternals.info
+info: $(docobjdir)/cpp.info $(docobjdir)/gcc.info $(docobjdir)/gccint.info $(docobjdir)/gccinstall.info lang.info $(docobjdir)/cppinternals.info
TEXI_CPP_FILES = $(docdir)/cpp.texi $(docdir)/include/fdl.texi \
$(docdir)/cppenv.texi $(docdir)/cppopts.texi
TEXI_CPPINT_FILES = $(docdir)/cppinternals.texi
-$(docdir)/cpp.info: $(TEXI_CPP_FILES)
- cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/cpp.info doc/cpp.texi
+$(docobjdir)/cpp.info: $(TEXI_CPP_FILES)
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) -I $(docdir)/include \
+ -o $@ $(docdir)/cpp.texi
-$(docdir)/gcc.info: $(TEXI_GCC_FILES)
- cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/gcc.info doc/gcc.texi
+$(docobjdir)/gcc.info: $(TEXI_GCC_FILES)
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) -I $(docdir)/include \
+ -o $@ $(docdir)/gcc.texi
-$(docdir)/gccint.info: $(TEXI_GCCINT_FILES)
- cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/gccint.info doc/gccint.texi
+$(docobjdir)/gccint.info: $(TEXI_GCCINT_FILES)
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) -I $(docdir)/include \
+ -o $@ $(docdir)/gccint.texi
-$(docdir)/gccinstall.info: $(TEXI_GCCINSTALL_FILES)
- cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/gccinstall.info doc/install.texi
+$(docobjdir)/gccinstall.info: $(TEXI_GCCINSTALL_FILES)
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) -I $(docdir)/include \
+ -o $@ $(docdir)/install.texi
-$(docdir)/cppinternals.info: $(TEXI_CPPINT_FILES)
- cd $(srcdir) && $(MAKEINFO) $(MAKEINFOFLAGS) -I doc -I doc/include -o doc/cppinternals.info \
- doc/cppinternals.texi
+$(docobjdir)/cppinternals.info: $(TEXI_CPPINT_FILES)
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) -I $(docdir)/include \
+ -o $@ $(docdir)/cppinternals.texi
dvi: gcc.dvi gccint.dvi gccinstall.dvi cpp.dvi lang.dvi cppinternals.dvi
cppinternals.dvi: $(TEXI_CPPINT_FILES)
$(TEXI2DVI) -I $(docdir) -I $(docdir)/include $(docdir)/cppinternals.texi
-generated-manpages: $(docdir)/gcov.1 $(docdir)/cpp.1 $(docdir)/gcc.1 \
- $(docdir)/gfdl.7 $(docdir)/gpl.7 $(docdir)/fsf-funding.7 \
+generated-manpages: $(docobjdir)/gcov.1 $(docobjdir)/cpp.1 $(docobjdir)/gcc.1 \
+ $(docobjdir)/gfdl.7 $(docobjdir)/gpl.7 $(docobjdir)/fsf-funding.7 \
lang.generated-manpages
-$(docdir)/gcov.1: $(docdir)/gcov.texi
- $(STAMP) $(docdir)/gcov.1
+$(docobjdir)/gcov.1: $(docdir)/gcov.texi
+ $(STAMP) $(docobjdir)/gcov.1
-$(TEXI2POD) $(docdir)/gcov.texi > gcov.pod
- -($(POD2MAN) --section=1 gcov.pod > $(docdir)/gcov.1.T$$$$ && \
- mv -f $(docdir)/gcov.1.T$$$$ $(docdir)/gcov.1) || \
- (rm -f $(docdir)/gcov.1.T$$$$ && exit 1)
+ -($(POD2MAN) --section=1 gcov.pod > $(docobjdir)/gcov.1.T$$$$ && \
+ mv -f $(docobjdir)/gcov.1.T$$$$ $(docobjdir)/gcov.1) || \
+ (rm -f $(docobjdir)/gcov.1.T$$$$ && exit 1)
-rm -f gcov.pod
-$(docdir)/cpp.1: $(docdir)/cpp.texi $(docdir)/cppenv.texi \
+$(docobjdir)/cpp.1: $(docdir)/cpp.texi $(docdir)/cppenv.texi \
$(docdir)/cppopts.texi
- $(STAMP) $(docdir)/cpp.1
+ $(STAMP) $(docobjdir)/cpp.1
-$(TEXI2POD) $(docdir)/cpp.texi > cpp.pod
- -($(POD2MAN) --section=1 cpp.pod > $(docdir)/cpp.1.T$$$$ && \
- mv -f $(docdir)/cpp.1.T$$$$ $(docdir)/cpp.1) || \
- (rm -f $(docdir)/cpp.1.T$$$$ && exit 1)
+ -($(POD2MAN) --section=1 cpp.pod > $(docobjdir)/cpp.1.T$$$$ && \
+ mv -f $(docobjdir)/cpp.1.T$$$$ $(docobjdir)/cpp.1) || \
+ (rm -f $(docobjdir)/cpp.1.T$$$$ && exit 1)
-rm -f cpp.pod
-$(docdir)/gcc.1: $(docdir)/invoke.texi $(docdir)/cppenv.texi \
+$(docobjdir)/gcc.1: $(docdir)/invoke.texi $(docdir)/cppenv.texi \
$(docdir)/cppopts.texi
- $(STAMP) $(docdir)/gcc.1
+ $(STAMP) $(docobjdir)/gcc.1
-$(TEXI2POD) $(docdir)/invoke.texi > gcc.pod
- -($(POD2MAN) --section=1 gcc.pod > $(docdir)/gcc.1.T$$$$ && \
- mv -f $(docdir)/gcc.1.T$$$$ $(docdir)/gcc.1) || \
- (rm -f $(docdir)/gcc.1.T$$$$ && exit 1)
+ -($(POD2MAN) --section=1 gcc.pod > $(docobjdir)/gcc.1.T$$$$ && \
+ mv -f $(docobjdir)/gcc.1.T$$$$ $(docobjdir)/gcc.1) || \
+ (rm -f $(docobjdir)/gcc.1.T$$$$ && exit 1)
-rm -f gcc.pod
-$(docdir)/gfdl.7: $(docdir)/include/fdl.texi
- $(STAMP) $(docdir)/gfdl.7
+$(docobjdir)/gfdl.7: $(docdir)/include/fdl.texi
+ $(STAMP) $(docobjdir)/gfdl.7
-$(TEXI2POD) $(docdir)/include/fdl.texi > gfdl.pod
- -($(POD2MAN) --section=7 gfdl.pod > $(docdir)/gfdl.7.T$$$$ && \
- mv -f $(docdir)/gfdl.7.T$$$$ $(docdir)/gfdl.7) || \
- (rm -f $(docdir)/gfdl.7.T$$$$ && exit 1)
+ -($(POD2MAN) --section=7 gfdl.pod > $(docobjdir)/gfdl.7.T$$$$ && \
+ mv -f $(docobjdir)/gfdl.7.T$$$$ $(docobjdir)/gfdl.7) || \
+ (rm -f $(docobjdir)/gfdl.7.T$$$$ && exit 1)
-rm -f gfdl.pod
-$(docdir)/gpl.7: $(docdir)/include/gpl.texi
- $(STAMP) $(docdir)/gpl.7
+$(docobjdir)/gpl.7: $(docdir)/include/gpl.texi
+ $(STAMP) $(docobjdir)/gpl.7
-$(TEXI2POD) $(docdir)/include/gpl.texi > gpl.pod
- -($(POD2MAN) --section=7 gpl.pod > $(docdir)/gpl.7.T$$$$ && \
- mv -f $(docdir)/gpl.7.T$$$$ $(docdir)/gpl.7) || \
- (rm -f $(docdir)/gpl.7.T$$$$ && exit 1)
+ -($(POD2MAN) --section=7 gpl.pod > $(docobjdir)/gpl.7.T$$$$ && \
+ mv -f $(docobjdir)/gpl.7.T$$$$ $(docobjdir)/gpl.7) || \
+ (rm -f $(docobjdir)/gpl.7.T$$$$ && exit 1)
-rm -f gpl.pod
-$(docdir)/fsf-funding.7: $(docdir)/include/funding.texi
- $(STAMP) $(docdir)/fsf-funding.7
+$(docobjdir)/fsf-funding.7: $(docdir)/include/funding.texi
+ $(STAMP) $(docobjdir)/fsf-funding.7
-$(TEXI2POD) $(docdir)/include/funding.texi > fsf-funding.pod
-($(POD2MAN) --section=7 fsf-funding.pod \
- > $(docdir)/fsf-funding.7.T$$$$ && \
- mv -f $(docdir)/fsf-funding.7.T$$$$ $(docdir)/fsf-funding.7) || \
- (rm -f $(docdir)/fsf-funding.7.T$$$$ && exit 1)
+ > $(docobjdir)/fsf-funding.7.T$$$$ && \
+ mv -f $(docobjdir)/fsf-funding.7.T$$$$ $(docobjdir)/fsf-funding.7) || \
+ (rm -f $(docobjdir)/fsf-funding.7.T$$$$ && exit 1)
-rm -f fsf-funding.pod
#\f
# Delete debugging dump files.
-rm -f *.[0-9][0-9].* */*.[0-9][0-9].*
# Delete some files made during installation.
- -rm -f specs SYSCALLS.c.X SYSCALLS.c
+ -rm -f specs $(SPECS) SYSCALLS.c.X SYSCALLS.c
-rm -f collect collect2 mips-tfile mips-tdump
# Delete files generated for fixproto
-rm -rf fix-header$(build_exeext) xsys-protos.h deduced.h tmp-deduced.h \
# that don't exist in the distribution.
INTL_CLEAN = intl.clean
clean: mostlyclean $(INTL_CLEAN) lang.clean
- -rm -f libgcc.a libgcc_eh.a libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).1
+ -rm -f libgcc.a libgcc_eh.a libgcov.a
+ -rm -f libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).1
-rm -f config.h tconfig.h bconfig.h tm_p.h tm.h
-rm -f cs-*
-rm -rf libgcc
-rm -f c-parse.y c-parse.c c-parse.output TAGS
-rm -f cpp.??s cpp.*aux
-rm -f gcc.??s gcc.*aux
- -rm -f $(docdir)/cpp.info* $(docdir)/gcc.info* $(docdir)/gccint.info*
- -rm -f $(docdir)/cppinternals.info*
- -rm -f $(docdir)/gcov.1 $(docdir)/cpp.1 $(docdir)/gcc.1
- -rm -f $(docdir)/fsf-funding.7 $(docdir)/gfdl.7 $(docdir)/gpl.7
+ -rm -f $(docobjdir)/cpp.info* $(docobjdir)/gcc.info* $(docobjdir)/gccint.info*
+ -rm -f $(docobjdir)/cppinternals.info*
+ -rm -f $(docobjdir)/gcov.1 $(docobjdir)/cpp.1 $(docobjdir)/gcc.1
+ -rm -f $(docobjdir)/fsf-funding.7 $(docobjdir)/gfdl.7 $(docobjdir)/gpl.7
#\f
# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.
# Handle cpp installation.
install-cpp: cpp$(exeext)
-if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(bindir)/$(CPP_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(bindir)/$(CPP_CROSS_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(CPP_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_CROSS_NAME)$(exeext); \
if [ x$(cpp_install_dir) != x ]; then \
- rm -f $(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
else true; fi; \
else \
- rm -f $(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext); \
if [ x$(cpp_install_dir) != x ]; then \
- rm -f $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
else true; fi; \
fi
# Create the installation directories.
+# $(libdir)/gcc-lib/include isn't currently searched by cpp.
installdirs:
- -if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; chmod a+rx $(prefix) ; fi
- -if [ -d $(exec_prefix) ] ; then true ; else mkdir $(exec_prefix) ; chmod a+rx $(exec_prefix) ; fi
- -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi
- -if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi
-# This dir isn't currently searched by cpp.
-# -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
- -fdir= ; for dir in `echo $(libsubdir) | tr '/' ' '`; do \
- fdir=$${fdir}/$${dir}; \
- if [ -d $${fdir} ] ; then true ; else mkdir $${fdir}; chmod a+rx $${fdir}; fi ; \
- done
- -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
- -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
- -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi
- -if [ -d $(slibdir) ] ; then true ; else mkdir $(slibdir) ; chmod a+rx $(slibdir) ; fi
-# We don't use mkdir -p to create the parents of man1dir,
-# because some systems don't support it.
-# Instead, we use this technique to create the immediate parent of man1dir.
- -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
- if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi
- -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; chmod a+rx $(man1dir) ; fi
- -if [ -d $(man7dir) ] ; then true ; else mkdir $(man7dir) ; chmod a+rx $(man7dir) ; fi
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(libsubdir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(bindir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(includedir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(infodir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(slibdir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(man1dir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(man7dir)
# Install the compiler executables built during cross compilation.
install-common: native $(EXTRA_PARTS) lang.install-common
for file in $(COMPILERS); do \
if [ -f $$file ] ; then \
- rm -f $(libsubdir)/$$file; \
- $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
+ rm -f $(DESTDIR)$(libsubdir)/$$file; \
+ $(INSTALL_PROGRAM) $$file $(DESTDIR)$(libsubdir)/$$file; \
else true; \
fi; \
done
for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
if [ x"$$file" != x.. ]; then \
- rm -f $(libsubdir)/$$file; \
- $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
+ rm -f $(DESTDIR)$(libsubdir)/$$file; \
+ $(INSTALL_PROGRAM) $$file $(DESTDIR)$(libsubdir)/$$file; \
else true; fi; \
done
for file in $(EXTRA_PARTS) ..; do \
if [ x"$$file" != x.. ]; then \
- rm -f $(libsubdir)/$$file; \
- $(INSTALL_DATA) $$file $(libsubdir)/$$file; \
- chmod a-x $(libsubdir)/$$file; \
+ rm -f $(DESTDIR)$(libsubdir)/$$file; \
+ $(INSTALL_DATA) $$file $(DESTDIR)$(libsubdir)/$$file; \
+ chmod a-x $(DESTDIR)$(libsubdir)/$$file; \
else true; fi; \
done
# Don't mess with specs if it doesn't exist yet.
-if [ -f specs ] ; then \
- rm -f $(libsubdir)/specs; \
- $(INSTALL_DATA) specs $(libsubdir)/specs; \
- chmod a-x $(libsubdir)/specs; \
+ rm -f $(DESTDIR)$(libsubdir)/specs; \
+ $(INSTALL_DATA) $(SPECS) $(DESTDIR)$(libsubdir)/specs; \
+ chmod a-x $(DESTDIR)$(libsubdir)/specs; \
fi
# Install protoize if it was compiled.
-if [ -f protoize$(exeext) ]; \
then \
if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
- rm -f $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext); \
else \
- rm -f $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
- rm -f $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \
fi ; \
- rm -f $(libsubdir)/SYSCALLS.c.X; \
- $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
- chmod a-x $(libsubdir)/SYSCALLS.c.X; \
+ rm -f $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
+ $(INSTALL_DATA) SYSCALLS.c.X $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
+ chmod a-x $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \
fi
# Install gcov if it was compiled.
-if [ -f gcov$(exeext) ]; \
then \
- rm -f $(bindir)/gcov$(exeext); \
- $(INSTALL_PROGRAM) gcov$(exeext) $(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/gcov$(exeext); \
+ $(INSTALL_PROGRAM) gcov$(exeext) $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \
fi
- $(INSTALL_SCRIPT) gccbug $(bindir)/$(GCCBUG_INSTALL_NAME)
+ $(INSTALL_SCRIPT) gccbug $(DESTDIR)$(bindir)/$(GCCBUG_INSTALL_NAME)
# Install the driver program as $(target_alias)-gcc,
# $(target-alias)-gcc-$(version)
# and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
install-driver: installdirs xgcc$(exeext)
-if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
- rm -f $(bindir)/$(target_alias)-gcc-$(version); \
- $(LN) $(bindir)/$(GCC_CROSS_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-$(version) ; \
- if [ -d $(gcc_tooldir)/bin/. ] ; then \
- rm -f $(gcc_tooldir)/bin/gcc$(exeext); \
- $(INSTALL_PROGRAM) gcc-cross$(exeext) $(gcc_tooldir)/bin/gcc$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(GCC_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) gcc-cross$(exeext) $(DESTDIR)$(bindir)/$(GCC_CROSS_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(target_alias)-gcc-$(version); \
+ ( cd $(DESTDIR)$(bindir) && \
+ $(LN) $(GCC_CROSS_NAME)$(exeext) $(target_alias)-gcc-$(version) ); \
+ if [ -d $(DESTDIR)$(gcc_tooldir)/bin/. ] ; then \
+ rm -f $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \
+ $(INSTALL_PROGRAM) gcc-cross$(exeext) $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \
else true; fi; \
else \
- rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
- rm -f $(bindir)/$(target_alias)-gcc-$(version); \
- $(LN) $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-$(version) ; \
- rm -f $(bindir)/$(target_alias)-gcc-tmp$(exeext); \
- $(LN) $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-tmp$(exeext); \
- mv $(bindir)/$(target_alias)-gcc-tmp$(exeext) $(bindir)/$(GCC_TARGET_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(bindir)/$(target_alias)-gcc-$(version); \
+ ( cd $(DESTDIR)$(bindir) && \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_alias)-gcc-$(version) ); \
+ rm -f $(DESTDIR)$(bindir)/$(target_alias)-gcc-tmp$(exeext); \
+ ( cd $(DESTDIR)$(bindir) && \
+ $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_alias)-gcc-tmp$(exeext) && \
+ mv -f $(target_alias)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \
fi
# Install the info files.
# $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
# to do the install.
install-info: doc installdirs lang.install-info
- -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
- -rm -f $(infodir)/cppinternals.info* $(infodir)/gccint.info*
- if [ -f $(docdir)/gcc.info ]; then \
- for f in $(docdir)/cpp.info* $(docdir)/gcc.info* \
- $(docdir)/cppinternals.info* $(docdir)/gccint.info*; do \
+ -rm -f $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info*
+ -rm -f $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info*
+ if [ -f $(docobjdir)/gcc.info ]; then \
+ for f in $(docobjdir)/cpp.info* $(docobjdir)/gcc.info* \
+ $(docobjdir)/cppinternals.info* $(docobjdir)/gccint.info*; do \
realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
- $(INSTALL_DATA) $$f $(infodir)/$$realfile; \
+ $(INSTALL_DATA) $$f $(DESTDIR)$(infodir)/$$realfile; \
done; \
else true; fi
-if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
- if [ -f $(infodir)/dir ] ; then \
+ if [ -f $(DESTDIR)$(infodir)/dir ] ; then \
for f in cpp.info gcc.info gccint.info cppinternals.info; do \
- if [ -f $(infodir)/$$f ]; then \
- install-info --dir-file=$(infodir)/dir $(infodir)/$$f; \
+ if [ -f $(DESTDIR)$(infodir)/$$f ]; then \
+ install-info --dir-file=$(DESTDIR)$(infodir)/dir $(DESTDIR)$(infodir)/$$f; \
else true; fi; \
done; \
else true; fi; \
else true; fi;
- -chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
- -chmod a-x $(infodir)/cppinternals.info* $(infodir)/gccint.info*
+ -chmod a-x $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info*
+ -chmod a-x $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info*
# Install the man pages.
install-man: installdirs $(GENERATED_MANPAGES) lang.install-man
-if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
- $(INSTALL_DATA) $(docdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
- chmod a-x $(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
+ rm -f $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
+ $(INSTALL_DATA) $(docobjdir)/gcc.1 $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
+ chmod a-x $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext); \
else \
- rm -f $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
- $(INSTALL_DATA) $(docdir)/gcc.1 $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
- chmod a-x $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
+ rm -f $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
+ $(INSTALL_DATA) $(docobjdir)/gcc.1 $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
+ chmod a-x $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext); \
fi
- -rm -f $(man1dir)/cpp$(man1ext)
- -$(INSTALL_DATA) $(docdir)/cpp.1 $(man1dir)/cpp$(man1ext)
- -chmod a-x $(man1dir)/cpp$(man1ext)
- -rm -f $(man1dir)/gcov$(man1ext)
- -$(INSTALL_DATA) $(docdir)/gcov.1 $(man1dir)/gcov$(man1ext)
- -chmod a-x $(man1dir)/gcov$(man1ext)
- -rm -f $(man7dir)/fsf-funding$(man7ext)
- -$(INSTALL_DATA) $(docdir)/fsf-funding.7 $(man7dir)/fsf-funding$(man7ext)
- -chmod a-x $(man7dir)/fsf-funding$(man7ext)
- -rm -f $(man7dir)/gfdl$(man7ext)
- -$(INSTALL_DATA) $(docdir)/gfdl.7 $(man7dir)/gfdl$(man7ext)
- -chmod a-x $(man7dir)/gfdl$(man7ext)
- -rm -f $(man7dir)/gpl$(man7ext)
- -$(INSTALL_DATA) $(docdir)/gpl.7 $(man7dir)/gpl$(man7ext)
- -chmod a-x $(man7dir)/gpl$(man7ext)
+ -rm -f $(DESTDIR)$(man1dir)/cpp$(man1ext)
+ -$(INSTALL_DATA) $(docobjdir)/cpp.1 $(DESTDIR)$(man1dir)/cpp$(man1ext)
+ -chmod a-x $(DESTDIR)$(man1dir)/cpp$(man1ext)
+ -rm -f $(DESTDIR)$(man1dir)/gcov$(man1ext)
+ -$(INSTALL_DATA) $(docobjdir)/gcov.1 $(DESTDIR)$(man1dir)/gcov$(man1ext)
+ -chmod a-x $(DESTDIR)$(man1dir)/gcov$(man1ext)
+ -rm -f $(DESTDIR)$(man7dir)/fsf-funding$(man7ext)
+ -$(INSTALL_DATA) $(docobjdir)/fsf-funding.7 $(DESTDIR)$(man7dir)/fsf-funding$(man7ext)
+ -chmod a-x $(DESTDIR)$(man7dir)/fsf-funding$(man7ext)
+ -rm -f $(DESTDIR)$(man7dir)/gfdl$(man7ext)
+ -$(INSTALL_DATA) $(docobjdir)/gfdl.7 $(DESTDIR)$(man7dir)/gfdl$(man7ext)
+ -chmod a-x $(DESTDIR)$(man7dir)/gfdl$(man7ext)
+ -rm -f $(DESTDIR)$(man7dir)/gpl$(man7ext)
+ -$(INSTALL_DATA) $(docobjdir)/gpl.7 $(DESTDIR)$(man7dir)/gpl$(man7ext)
+ -chmod a-x $(DESTDIR)$(man7dir)/gpl$(man7ext)
# Install the library.
-install-libgcc: libgcc.mk libgcc.a installdirs
- if $(RANLIB_TEST_FOR_TARGET); then \
- r_f_t=$(RANLIB_FOR_TARGET); \
- else \
- r_f_t=: ; \
- fi; \
+install-libgcc: libgcc.mk libgcc.a libgcov.a installdirs
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
BUILD_PREFIX="$(BUILD_PREFIX)" BUILD_PREFIX_1="$(BUILD_PREFIX_1)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
- RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
MAKEOVERRIDES= \
INSTALL_DATA="$(INSTALL_DATA)" \
- RANLIB_FOR_TARGET="$$r_f_t" \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
+ DESTDIR="$(DESTDIR)" \
libsubdir="$(libsubdir)" \
slibdir="$(slibdir)" \
-f libgcc.mk install
-# Install multiple versions of libgcc.a.
+# Install multiple versions of libgcc.a, libgcov.a.
install-multilib: stmp-multilib installdirs
- if $(RANLIB_TEST_FOR_TARGET); then \
- r_f_t=$(RANLIB_FOR_TARGET); \
- else \
- r_f_t=: ; \
- fi; \
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
BUILD_PREFIX="$(BUILD_PREFIX)" BUILD_PREFIX_1="$(BUILD_PREFIX_1)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \
- RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
NM_FOR_TARGET="$(NM_FOR_TARGET)" AWK="$(AWK)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
INCLUDES="$(INCLUDES)" \
LIB1ASMSRC='$(LIB1ASMSRC)' \
MAKEOVERRIDES= \
INSTALL_DATA="$(INSTALL_DATA)" \
- RANLIB_FOR_TARGET="$$r_f_t" \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
+ DESTDIR="$(DESTDIR)" \
libsubdir="$(libsubdir)" \
slibdir="$(slibdir)" \
-f libgcc.mk install
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
# Don't need to use LN_S here since we really do need ln -s and no substitutes.
- -files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
+ -files=`cd $(DESTDIR)$(libsubdir)/include; find . -type l -print 2>/dev/null`; \
if [ $$? -eq 0 ]; then \
dir=`cd include; ${PWD}`; \
for i in $$files; do \
- dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
+ dest=`ls -ld $(DESTDIR)$(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
if expr "$$dest" : "$$dir.*" > /dev/null; then \
- rm -f $(libsubdir)/include/$$i; \
- ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \
+ rm -f $(DESTDIR)$(libsubdir)/include/$$i; \
+ ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(DESTDIR)$(libsubdir)/include/$$i; \
fi; \
done; \
fi
# Create or recreate the gcc private include file directory.
install-include-dir: installdirs
- -rm -rf $(libsubdir)/include
- mkdir $(libsubdir)/include
- -chmod a+rx $(libsubdir)/include
+ -rm -rf $(DESTDIR)$(libsubdir)/include
+ mkdir $(DESTDIR)$(libsubdir)/include
+ -chmod a+rx $(DESTDIR)$(libsubdir)/include
# Install the include directory using tar.
install-headers-tar: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
# found in CDPATH, corrupting the output. We could just redirect the
# output of `cd', but some shells lose on redirection within `()'s
(cd `${PWD}`/include ; \
- tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar xpf - )
+ tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include; tar xpf - )
# /bin/sh on some systems returns the status of the first tar,
# and that can lose with GNU tar which always writes a full block.
# So use `exit 0' to ignore its exit status.
install-headers-cpio: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
# See discussion about the use of `pwd` above
cd `${PWD}`/include ; \
- find . -print | cpio -pdum $(libsubdir)/include
+ find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include
# Install the include directory using cp.
install-headers-cp: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
- cp -p -r include $(libsubdir)
+ cp -p -r include $(DESTDIR)$(libsubdir)
itoolsdir = $(libsubdir)/install-tools
# Don't install the headers. Instead, install appropriate scripts
# and supporting files for fixincludes to be run later.
install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir \
mkheaders xlimits.h
- -rm -rf $(itoolsdir)
- $(SHELL) $(srcdir)/mkinstalldirs $(itoolsdir)/include
+ -rm -rf $(DESTDIR)$(itoolsdir)
+ $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(itoolsdir)/include
for file in $(USER_H); do \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
$(INSTALL_DATA) $$file \
- $(itoolsdir)/include/$$realfile ; \
+ $(DESTDIR)$(itoolsdir)/include/$$realfile ; \
done
- $(INSTALL_DATA) xlimits.h $(itoolsdir)/include/limits.h
+ $(INSTALL_DATA) xlimits.h $(DESTDIR)$(itoolsdir)/include/limits.h
if [ x$(STMP_FIXINC) != x ] ; then \
$(INSTALL_DATA) $(srcdir)/README-fixinc \
- $(itoolsdir)/include/README ; \
- $(INSTALL_PROGRAM) fixinc.sh $(itoolsdir)/fixinc.sh ; \
- $(INSTALL_PROGRAM) fixinc/fixincl $(itoolsdir)/fixincl ; \
- $(INSTALL_DATA) $(srcdir)/gsyslimits.h $(itoolsdir)/gsyslimits.h ; \
+ $(DESTDIR)$(itoolsdir)/include/README ; \
+ $(INSTALL_PROGRAM) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh ; \
+ $(INSTALL_PROGRAM) fixinc/fixincl $(DESTDIR)$(itoolsdir)/fixincl ; \
+ $(INSTALL_DATA) $(srcdir)/gsyslimits.h $(DESTDIR)$(itoolsdir)/gsyslimits.h ; \
else :; fi
if [ x$(STMP_FIXPROTO) != x ] ; then \
$(INSTALL_PROGRAM) $(srcdir)/mkinstalldirs \
- $(itoolsdir)/mkinstalldirs ; \
- $(INSTALL_PROGRAM) $(srcdir)/fixproto $(itoolsdir)/fixproto ; \
+ $(DESTDIR)$(itoolsdir)/mkinstalldirs ; \
+ $(INSTALL_PROGRAM) $(srcdir)/fixproto $(DESTDIR)$(itoolsdir)/fixproto ; \
$(INSTALL_PROGRAM) fix-header$(build_exeext) \
- $(itoolsdir)/fix-header$(build_exeext) ; \
+ $(DESTDIR)$(itoolsdir)/fix-header$(build_exeext) ; \
else :; fi
- $(INSTALL_PROGRAM) mkheaders $(itoolsdir)/mkheaders
+ $(INSTALL_PROGRAM) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders
echo 'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \
- > $(itoolsdir)/mkheaders.conf
+ > $(DESTDIR)$(itoolsdir)/mkheaders.conf
echo 'OTHER_FIXINCLUDES_DIRS="$(OTHER_FIXINCLUDES_DIRS)"' \
- >> $(itoolsdir)/mkheaders.conf
+ >> $(DESTDIR)$(itoolsdir)/mkheaders.conf
echo 'FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"' \
- >> $(itoolsdir)/mkheaders.conf
- echo 'STMP_FIXPROTO="$(STMP_FIXPROTO)"' >> $(itoolsdir)/mkheaders.conf
- echo 'STMP_FIXINC="$(STMP_FIXINC)"' >> $(itoolsdir)/mkheaders.conf
+ >> $(DESTDIR)$(itoolsdir)/mkheaders.conf
+ echo 'STMP_FIXPROTO="$(STMP_FIXPROTO)"' >> $(DESTDIR)$(itoolsdir)/mkheaders.conf
+ echo 'STMP_FIXINC="$(STMP_FIXINC)"' >> $(DESTDIR)$(itoolsdir)/mkheaders.conf
# Use this target to install the program `collect2' under the name `collect2'.
install-collect2: collect2 installdirs
- $(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/collect2$(exeext)
+ $(INSTALL_PROGRAM) collect2$(exeext) $(DESTDIR)$(libsubdir)/collect2$(exeext)
# Install the driver program as $(libsubdir)/gcc for collect2.
- $(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)
+ $(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(libsubdir)/gcc$(exeext)
# Cancel installation by deleting the installed files.
uninstall: intl.uninstall lang.uninstall
- -rm -rf $(libsubdir)
- -rm -rf $(bindir)/$(GCC_INSTALL_NAME)$(exeext)
- -rm -rf $(bindir)/$(GCC_CROSS_NAME)$(exeext)
- -rm -f $(bindir)/$(CPP_INSTALL_NAME)$(exeext)
- -rm -f $(bindir)/$(CPP_CROSS_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(libsubdir)
+ -rm -rf $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(bindir)/$(GCC_CROSS_NAME)$(exeext)
+ -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext)
+ -rm -f $(DESTDIR)$(bindir)/$(CPP_CROSS_NAME)$(exeext)
-if [ x$(cpp_install_dir) != x ]; then \
- rm -f $(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
- rm -f $(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \
+ rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_CROSS_NAME)$(exeext); \
else true; fi
- -rm -rf $(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext)
- -rm -rf $(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext)
- -rm -rf $(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext)
- -rm -rf $(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext)
- -rm -rf $(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
- -rm -rf $(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
- -rm -rf $(man1dir)/$(GCC_CROSS_NAME)$(man1ext)
- -rm -rf $(man1dir)/cpp$(man1ext)
- -rm -rf $(man1dir)/protoize$(man1ext)
- -rm -rf $(man1dir)/unprotoize$(man1ext)
- -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
- -rm -f $(infodir)/cppinternals.info* $(infodir)/gccint.info*
+ -rm -rf $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(bindir)/$(PROTOIZE_CROSS_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(bindir)/$(UNPROTOIZE_CROSS_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
+ -rm -rf $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext)
+ -rm -rf $(DESTDIR)$(man1dir)/$(GCC_CROSS_NAME)$(man1ext)
+ -rm -rf $(DESTDIR)$(man1dir)/cpp$(man1ext)
+ -rm -rf $(DESTDIR)$(man1dir)/protoize$(man1ext)
+ -rm -rf $(DESTDIR)$(man1dir)/unprotoize$(man1ext)
+ -rm -f $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info*
+ -rm -f $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info*
#\f
# These targets are for the dejagnu testsuites. The file site.exp
# contains global variables that all the testsuites will use.
@echo "set target_alias $(target_alias)" >> ./tmp0
# CFLAGS is set even though it's empty to show we reserve the right to set it.
@echo "set CFLAGS \"\"" >> ./tmp0
- @echo "set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> ./tmp0
+ @echo "set CXXFLAGS \"\"" >> ./tmp0
@echo "set TESTING_IN_BUILD_TREE 1" >> ./tmp0
@echo "set HAVE_LIBSTDCXX_V3 1" >> ./tmp0
# If newlib has been configured, we need to pass -B to gcc so it can find
CFLAGS="$(BOOT_CFLAGS)" \
LDFLAGS="$(BOOT_LDFLAGS)" \
WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \
+ WERROR="@WERROR@" \
STRICT_WARN="$(STRICT2_WARN)" \
libdir=$(libdir) \
LANGUAGES="$(LANGUAGES)" \
-if [ -f as$(exeext) ] ; then (cd stage1 && $(LN_S) ../as$(exeext) .) ; else true ; fi
-if [ -f ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -rm -f stage1/libgcc.a stage1/libgcc_eh.a
+ -rm -f stage1/libgcc.a stage1/libgcc_eh.a stage1/libgcov.a
-cp libgcc.a stage1
- -if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) stage1/libgcc.a; \
- else true; fi
+ -$(RANLIB_FOR_TARGET) stage1/libgcc.a
+ -cp libgcov.a stage1
+ -$(RANLIB_FOR_TARGET) stage1/libgcov.a
-if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage1; \
- if $(RANLIB_TEST_FOR_TARGET) ; then \
$(RANLIB_FOR_TARGET) stage1/libgcc_eh.a; \
- else true; fi; fi
+ fi
-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
cp stage1/$${f} . ; \
else true; \
-if [ -f as$(exeext) ] ; then (cd stage2 && $(LN_S) ../as$(exeext) .) ; else true ; fi
-if [ -f ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -rm -f stage2/libgcc.a stage2/libgcc_eh.a
+ -rm -f stage2/libgcc.a stage2/libgcov.a stage2/libgcc_eh.a
-cp libgcc.a stage2
- -if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) stage2/libgcc.a; \
- else true; fi
+ -$(RANLIB_FOR_TARGET) stage2/libgcc.a
+ -cp libgcov.a stage2
+ -$(RANLIB_FOR_TARGET) stage2/libgcov.a
-if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage2; \
- if $(RANLIB_TEST_FOR_TARGET) ; then \
$(RANLIB_FOR_TARGET) stage2/libgcc_eh.a; \
- else true; fi; fi
+ fi
-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
cp stage2/$${f} . ; \
else true; \
-if [ -f as$(exeext) ] ; then (cd stage3 && $(LN_S) ../as$(exeext) .) ; else true ; fi
-if [ -f ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -rm -f stage3/libgcc.a stage3/libgcc_eh.a
+ -rm -f stage3/libgcc.a stage3/libgcov.a stage3/libgcc_eh.a
-cp libgcc.a stage3
- -if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) stage3/libgcc.a; \
- else true; fi
+ -$(RANLIB_FOR_TARGET) stage3/libgcc.a
+ -cp libgcov.a stage3
+ -$(RANLIB_FOR_TARGET) stage3/libgcov.a
-if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage3; \
- if $(RANLIB_TEST_FOR_TARGET) ; then \
$(RANLIB_FOR_TARGET) stage3/libgcc_eh.a; \
- else true; fi; fi
+ fi
-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
cp stage3/$${f} . ; \
else true; \
-if [ -f as$(exeext) ] ; then (cd stage4 && $(LN_S) ../as$(exeext) .) ; else true ; fi
-if [ -f ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../ld$(exeext) .) ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi
- -rm -f stage4/libgcc.a stage4/libgcc_eh.a
+ -rm -f stage4/libgcc.a stage4/libgcov.a stage4/libgcc_eh.a
-cp libgcc.a stage4
- -if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) stage4/libgcc.a; \
- else true; fi
+ -$(RANLIB_FOR_TARGET) stage4/libgcc.a
+ -cp libgcov.a stage4
+ -$(RANLIB_FOR_TARGET) stage4/libgcov.a
-if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage4; \
- if $(RANLIB_TEST_FOR_TARGET) ; then \
$(RANLIB_FOR_TARGET) stage4/libgcc_eh.a; \
- else true; fi; fi
+ fi
-for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
cp stage4/$${f} . ; \
else true; \
OSDN Git Service
