# separate from BOOT_CFLAGS because people tend to override optimization
# flags and we'd like them to still have warnings turned on. They are free
# to explicitly turn warnings off if they wish.
+# LOOSE_CFLAGS are the CFLAGS to use when compiling something which is only
+# compiled with gcc, such as libgcc and the frontends other than C.
# XCFLAGS is used for most compilations but not when using the GCC just built.
# TCFLAGS is used for compilations with the GCC just built.
XCFLAGS =
TCFLAGS =
CFLAGS = -g @stage1_warn_cflags@
BOOT_CFLAGS = -O2 $(CFLAGS)
-WARN_CFLAGS = -W -Wall -Wtraditional
+WARN_CFLAGS = @stage2_warn_cflags@
+LOOSE_CFLAGS = `echo $(CFLAGS)|sed -e 's/-pedantic//g' -e 's/-Wtraditional//g'`
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =
# These permit overriding just for certain files.
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
-MAKEINFO = `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
- then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
- else echo makeinfo ; fi`
+MAKEINFO = @MAKEINFO@
MAKEINFOFLAGS =
TEXI2DVI = texi2dvi
# For GNUmake: let us decide what gets passed to recursive makes.
[ -f $(RANLIB) ] \
|| [ -f /usr/bin/ranlib -o -f /bin/ranlib ]
+# Substitution type for target's getgroups 2nd arg.
+TARGET_GETGROUPS_T = @TARGET_GETGROUPS_T@
+
# Compiler to use for compiling libgcc1.a.
# OLDCC should not be the GNU C compiler,
# since that would compile typical libgcc1.a functions such as mulsi3
# want to set this empty.
INSTALL_ASSERT_H = install-assert-h
-# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
+# The GCC to use for compiling libgcc.a, enquire, and libgcc1-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
-GCC_FOR_TARGET = ./xgcc -B$(build_tooldir)/bin/ -B./ -I$(build_tooldir)/include
+GCC_FOR_TARGET = ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
-# It also specifies -I./include to find, e.g., stddef.h.
-GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS)
+# It also specifies -isystem ./include to find, e.g., stddef.h.
+GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_CFLAGS) -isystem ./include $(TCFLAGS)
# Specify the abi to use when building the c++ runtime
GXX_ABI_FLAG=@GXX_ABI_FLAG@
# Dir to search for system headers. Overridden by cross-make.
SYSTEM_HEADER_DIR = /usr/include
+# Where to find some libiberty headers.
+HASHTAB_H = $(srcdir)/../include/hashtab.h
+OBSTACK_H = $(srcdir)/../include/obstack.h
+SPLAY_TREE_H= $(srcdir)/../include/splay-tree.h
+
# Default cross SYSTEM_HEADER_DIR, to be overridden by targets.
CROSS_SYSTEM_HEADER_DIR = $(tooldir)/sys-include
# The default rule assumes that libgcc1.a is supplied by the user.
CROSS_LIBGCC1 = libgcc1.cross
-# Specify the rule for actually making libgcc2.a.
-LIBGCC2 = libgcc2.a
-
# Options to use when compiling libgcc2.a.
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
# Additional options to use when compiling libgcc2.a.
-# Some targets override this to -Iinclude
+# Some targets override this to -isystem include
LIBGCC2_INCLUDES =
# Additional target-dependent options for compiling libgcc2.a.
TARGET_LIBGCC2_CFLAGS =
+# Addition sources to handle exceptions; overridden by some targets.
+LIB2ADDEH = $(srcdir)/frame-dwarf2.c
+
# libgcc1-test target (must also be overridable for a target)
LIBGCC1_TEST = libgcc1-test
# Control whether header files are installed.
INSTALL_HEADERS=install-headers
+# Control whether Info documentation is built and installed.
+BUILD_INFO = @BUILD_INFO@
+INSTALL_INFO = @INSTALL_INFO@
+
# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# just as /usr/include is.
HOST_CC=$(CC)
HOST_CFLAGS=$(ALL_CFLAGS)
HOST_CLIB=$(CLIB)
-HOST_INTLLIBS=$(INTLLIBS)
HOST_LDFLAGS=$(LDFLAGS)
HOST_CPPFLAGS=$(ALL_CPPFLAGS)
HOST_ALLOCA=$(ALLOCA)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
-HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_INTLLIBS) $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT)
+HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC) $(HOST_PREFIX)$(HOST_VFPRINTF) $(HOST_PREFIX)$(HOST_DOPRINT)
# How to link with both our special library facilities
# and the system's installed libraries.
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \
- $(HOST_INTLLIBS) $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) \
- $(HOST_CLIB)
+ $(USE_HOST_VFPRINTF) $(USE_HOST_DOPRINT) $(HOST_CLIB)
+
+HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o \
+ $(HOST_PREFIX)ggc-none.o gensupport.o
-HOST_RTL = $(HOST_PREFIX)rtl.o $(HOST_PREFIX)bitmap.o $(HOST_PREFIX)ggc-none.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o
HOST_ERRORS = $(HOST_PREFIX)errors.o
-e 's|%% *|../|g' \
-e 's|%||g'
SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \
- "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
+ "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
+# Flags to pass when recursing into a frontend subdirectory.
+LANG_FLAGS_TO_PASS = $(SUBDIR_FLAGS_TO_PASS) \
+ "CFLAGS=$(LOOSE_CFLAGS)"
#\f
# Lists of files for various purposes.
# Language-specific object files for C and Objective C.
-C_AND_OBJC_OBJS = c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
- c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
+C_AND_OBJC_OBJS = c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
+ c-convert.o c-aux-info.o c-common.o c-iterate.o c-semantics.o @extra_c_objs@
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o $(C_AND_OBJC_OBJS)
# Language-independent object files.
-OBJS = diagnostic.o \
- toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
- function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
- builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
- dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
- integrate.o jump.o cse.o loop.o unroll.o flow.o combine.o varray.o \
+OBJS = diagnostic.o \
+ toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
+ function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
+ builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
+ dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
+ integrate.o jump.o cse.o loop.o unroll.o flow.o combine.o varray.o \
regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
- insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
- insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
- profile.o insn-attrtab.o $(out_object_file) $(EXTRA_OBJS) convert.o \
- mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o \
- predict.o lists.o ggc-common.o $(GGC) simplify-rtx.o ssa.o bb-reorder.o \
- sibcall.o
+ insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o regrename.o \
+ insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
+ profile.o insn-attrtab.o $(out_object_file) $(EXTRA_OBJS) convert.o \
+ mbchar.o splay-tree.o graph.o sbitmap.o resource.o hash.o predict.o \
+ lists.o ggc-common.o $(GGC) simplify-rtx.o ssa.o bb-reorder.o \
+ sibcall.o conflict.o timevar.o ifcvt.o
# GEN files are listed separately, so they can be built before doing parallel
# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
GEN= genemit genoutput genrecog genextract genflags gencodes genconfig \
genpeep gengenrtl gencheck
-CCCP=@cpp_main@
-
# Files to be copied away after each stage in building.
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
- s-flags s-config s-codes s-mlib s-unders s-genrtl \
+ s-flags s-config s-codes s-mlib s-under s-genrtl \
s-output s-recog s-emit s-extract s-peep s-check \
- s-attr s-attrtab s-opinit s-crt s-$(T)crtS s-crt0 \
+ s-attr s-attrtab s-opinit s-crt0 \
genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \
genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \
genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \
genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \
- gencheck$(build_exeext) \
+ gencheck$(build_exeext) genrtl.c genrtl.h \
xgcc$(exeext) xcpp$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES) \
- $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
- $(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
- protoize$(exeext) unprotoize$(exeext) \
- specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
- gcov$(exeext) *.[0-9][0-9].* *.[si] libcpp.a \
+ $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) cc1obj$(exeext) \
+ enquire$(exeext) protoize$(exeext) unprotoize$(exeext) \
+ specs collect2$(exeext) $(USE_COLLECT2) underscore.c tradcpp$(exeext) \
+ gcov$(exeext) *.[0-9][0-9].* *.[si] libcpp.a libgcc libgcc.mk \
$(LANG_STAGESTUFF)
# Members of libgcc1.a.
FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
_fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
_lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
- _sf_to_df _thenan_sf _sf_to_usi _df_to_usi
+ _sf_to_df _thenan_sf _sf_to_usi
DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \
_fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
_lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \
- _df_to_sf _thenan_df _sf_to_usi _df_to_usi
+ _df_to_sf _thenan_df _df_to_usi
# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
EXPR_H = expr.h insn-codes.h
REGS_H = regs.h varray.h $(MACHMODE_H)
INTEGRATE_H = integrate.h varray.h
-LOOP_H = loop.h varray.h basic-block.h
+LOOP_H = loop.h varray.h bitmap.h
GCC_H = gcc.h version.h
+GGC_H = ggc.h varray.h
+TIMEVAR_H = timevar.h timevar.def
+INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h
#\f
# Language makefile fragments.
$(srcdir)/configure: $(srcdir)/configure.in
cd $(srcdir); autoconf
+gccbug: $(srcdir)/gccbug.in
+ CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status
+
+mklibgcc: $(srcdir)/mklibgcc.in
+ CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status
+
# cstamp-h.in controls rebuilding of config.in.
# It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
# delete it. A stamp file is needed as autoheader won't update the file if
# This is what to compile if making gcc with a cross-compiler.
all.build: native xgcc$(exeext) xcpp$(exeext) $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
-start.encap: native xgcc$(exeext) xcpp$(exeext) specs $(LIBGCC1) \
+start.encap: native xgcc$(exeext) xcpp$(exeext) specs \
xlimits.h lang.start.encap
# These can't be made until after GCC can run.
rest.encap: $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap
$(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
# Define the names for selecting languages in LANGUAGES.
-C c: cc1$(exeext)
+C c: cc1$(exeext) tradcpp$(exeext)
PROTO: proto
# Tell GNU make these are phony targets.
mv tmp-xlimits.h xlimits.h
#\f
# Build libgcc.a.
-# This is done in two parts because some functions, in libgcc1.c,
-# must be compiled with something other than GCC,
-# while the rest, in libgcc2.c, must be compiled with xgcc.
-# That means we can't do libgcc2.c until after xgcc, cc1, etc.
-
-# Use this as value of LIBGCC1 to cause conversion to GNU library format.
-# LIBCONVERT should put its output in libgcc1.conv.
-libgcc1.conv: libgcc1.a
- $(LIBCONVERT) libgcc1.a libgcc1.conv
-
-# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
-# Make an empty file instead.
-libgcc1.null: $(GCC_PASSES)
- echo "void __foo () {}" > dummy.c
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
- $(AR_CREATE_FOR_TARGET) libgcc1.null dummy$(objext)
- rm -f dummy$(objext) dummy.c
-
-# This is $(LIBGCC1) for a cross-compiler.
-# We have no automatic way of building libgcc1.a,
-# so it's up to the installer to find a way to do that.
-# This rule deliberately does not depend on libgcc1.a
-# so that it will fail if the installer hasn't provided it.
-libgcc1.cross:
- mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false)
-
-# Compile the library of arithmetic subroutines with the native compiler.
-# Don't compile it with GCC!
-# (That would cause most arithmetic functions to call themselves.)
-#
-# NOTE: If you modify these rules substantially, please be sure to
-# check at least config/i386/t-sco5 and possibly other makefile
-# fragments.
-libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
- -rm -f tmplibgcc1.a
-# Actually build it in tmplibgcc1.a, then rename at end,
-# so that libgcc1.a itself remains nonexistent if compilation is aborted.
-# -e causes any failing command to make this rule fail.
-# -e doesn't work in certain shells, so we test $$? as well.
-# lynx has a broken ar, it always complains when the initial library is
-# empty, thus this command works only if we don't do -e
-# There is a trailing backslash (\) deleted from the following line.
-# set -e;
- for name in $(LIB1FUNCS); \
- do \
- echo $${name}; \
- rm -f $${name}$(objext); \
- $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- mv libgcc1$(objext) $${name}$(objext); \
- $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
- rm -f $${name}$(objext); \
- done
-# Some shells crash when a loop has no items.
-# So make sure there is always at least one--`..'.
-# Then ignore it.
-# We don't use -e here because there are if statements
-# that should not make the command give up when the if condition is false.
-# Instead, we test for failure after each command where it matters.
- for file in .. $(LIB1FUNCS_EXTRA); \
- do \
- if [ x$${file} != x.. ]; then \
- name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
- echo $${name}; \
- if [ $${name}.asm = $${file} ]; then \
- cp $${file} $${name}.s || exit 1; file=$${name}.s; \
- else true; fi; \
- $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- rm -f $${name}.s $${name}$(objext); \
- else true; \
- fi; \
- done
- -if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) tmplibgcc1.a; \
- else true; fi
- mv tmplibgcc1.a libgcc1.a
-
-# Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
-# functions. LIB1ASMSRC is the name of the source file in the config
-# subdirectory.
-libgcc1-asm.a: libgcc2.ready config.status $(srcdir)/config/$(LIB1ASMSRC)
- -rm -f tmplibgcc1.a libgcc1.S
- cp $(srcdir)/config/$(LIB1ASMSRC) libgcc1.S
-# Actually build it in tmplibgcc1.a, then rename at end,
-# so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
-# -e causes any failing command to make this rule fail.
-# -e doesn't work in certain shells, so we test $$? as well.
-# lynx has a broken ar, it always complains when the initial library is
-# empty, thus this command works only if we don't do -e
-# There is a trailing backslash (\) deleted from the following line.
-# set -e;
- for name in $(LIB1ASMFUNCS); \
- do \
- echo $${name}; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- mv libgcc1$(objext) $${name}$(objext); \
- $(AR_CREATE_FOR_TARGET) tmplibgcc1.a $${name}$(objext); \
- rm -f $${name}$(objext); \
- done
- -rm -f libgcc1.S
- mv tmplibgcc1.a libgcc1-asm.a
-
-# Generate assembly versions of the functions required for libgcc1.
-# You'll still need to massage the code by hand (possibly hacking
-# underscores and local labels) but this will get you started.
-libgcc1.S: libgcc1.c $(CONFIG_H) config.status
- -rm -f libgcc1.S
- touch libgcc1.S
- for name in $(LIB1FUNCS); \
- do \
- echo $${name}; \
- $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- echo '#ifdef ' L$${name} >> libgcc1.S; \
- cat libgcc1.s >> libgcc1.S; \
- echo '#endif /*' L$${name} '*/' >> libgcc1.S; \
- echo "" >> libgcc1.S; \
- done
-
-# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
-# But recompiling cc1 should not force recompilation of libgcc2.a.
-# If you want to force recompilation, delete libgcc2.a.
-libgcc2.ready: $(GCC_PASSES) stmp-int-hdrs $(STMP_FIXPROTO)
- -if [ -f libgcc2.ready ] ; then \
- true; \
- else \
- touch libgcc2.ready; \
- fi
-LIB2ADD = $(srcdir)/frame.c $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
-libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(FPBIT) $(DPBIT) $(LIB2ADD) \
- $(MACHMODE_H) longlong.h frame.h gbl-ctors.h config.status stmp-int-hdrs \
- tsystem.h
-# Actually build it in tmplibgcc2.a, then rename at end,
-# so that libgcc2.a itself remains nonexistent if compilation is aborted.
- -rm -f tmplibgcc2.a
-# -e causes any failing command to make this rule fail.
-# -e doesn't work in certain shells, so we test $$? as well.
-# lynx has a broken ar, it always complains when the initial library is
-# empty, thus this command works only if we don't do -e
-# There is a trailing backslash (\) deleted from the following line.
-# set -e;
- for name in $(LIB2FUNCS); \
- do \
- echo $${name}; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
- $(MAYBE_USE_COLLECT2) $(srcdir)/libgcc2.c -o $${name}$(objext); \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR_CREATE_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
- rm -f $${name}$(objext); \
- done
- for name in $(LIB2FUNCS_EH); \
- do \
- echo $${name}; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) -fexceptions $(INCLUDES) -c \
- -DL$${name} $(srcdir)/libgcc2.c -o $${name}$(objext); \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR_CREATE_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
- rm -f $${name}$(objext); \
- done
- if [ x$(FPBIT) != x ]; then \
- for name in $(FPBIT_FUNCS); \
- do \
- echo $${name}; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
- -DFINE_GRAINED_LIBRARIES $(FPBIT) -o $${name}$(objext); \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR_CREATE_FOR_TARGET) tmplibgcc2.a $${name}$(objext); \
- rm -f $${name}$(objext); \
- done; \
- else true; fi;
- if [ x$(DPBIT) != x ]; then \
- for name in $(DPBIT_FUNCS); \
- do \
- echo $${name}; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
- -DFINE_GRAINED_LIBRARIES $(DPBIT) -o _dp$${name}$(objext); \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR_CREATE_FOR_TARGET) tmplibgcc2.a _dp$${name}$(objext); \
- rm -f _dp$${name}$(objext); \
- done; \
- else true; fi;
-# Some shells crash when a loop has no items.
-# So make sure there is always at least one--`..'.
-# Then ignore it.
-# We don't use -e here because there are if statements
-# that should not make the command give up when the if condition is false.
-# Instead, we test for failure after each command where it matters.
- for file in $(LIB2ADD); do \
- name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
- oname=` echo $${name} | sed -e 's,.*/,,'`; \
- if [ $${name}.txt = $${file} ]; then \
- for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \
- $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
- AR_FOR_TARGET="$(AR_FOR_TARGET)" \
- AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
- AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
- AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" CC="$(CC)" \
- CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \
- HOST_PREFIX_1="$(HOST_PREFIX_1)" \
- LANGUAGES="$(LANGUAGES)" \
- LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR_CREATE_FOR_TARGET) tmplibgcc2.a $${f}; \
- rm -f $${f}; \
- else true; \
- fi; done; \
- else \
- echo $${name}; \
- if [ $${name}.asm = $${file} ]; then \
- cp $${file} $${name}.s || exit 1; file=$${name}.s; \
- else true; fi; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR_CREATE_FOR_TARGET) tmplibgcc2.a $${oname}$(objext); \
- rm -f $${name}.s $${oname}$(objext); \
- fi; \
- done
- mv tmplibgcc2.a libgcc2.a
-# These lines were deleted from above the mv command
-# because ranlibing libgcc.a itself should suffice.
-# -if [ x${HPUX_GAS} = x ] ; then \
-# if $(RANLIB_TEST_FOR_TARGET) ; then \
-# $(RANLIB_FOR_TARGET) tmplibgcc2.a;
-# else true; fi; \
-# else true; fi
-
-# Combine the various libraries into a single library, libgcc.a.
-# $(LIBGCC1) is added after $(LIBGCC2) so that routines written in
-# assembler will be used in preference to the C versions.
-libgcc.a: $(LIBGCC1) $(LIBGCC2)
- -rm -rf tmplibgcc.a libgcc.a tmpcopy
- mkdir tmpcopy
- (cd tmpcopy; $(AR_EXTRACT_FOR_TARGET) ../$(LIBGCC2))
-# Some versions of ar (specifically the one in RISC/os 5.x), create an
-# unwritable table of contents file, and then print an error message when
-# the second ar command tries to overwrite this file. To avoid the error
-# message from ar, we make sure all files are writable.
- -(cd tmpcopy; chmod +w * > /dev/null 2>&1)
- -if [ x$(LIBGCC1) != x ]; \
- then (cd tmpcopy; $(AR_EXTRACT_FOR_TARGET) ../$(LIBGCC1)); \
- else true; \
- fi
- (cd tmpcopy; $(AR_CREATE_FOR_TARGET) ../tmplibgcc.a *$(objext))
- rm -rf tmpcopy
- -if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) tmplibgcc.a; \
- else true; fi
-# Actually build it in tmplibgcc.a, then rename at end,
-# so that libgcc.a itself remains nonexistent if compilation is aborted.
- mv tmplibgcc.a libgcc.a
+LIB2ADD = $(LIB2ADDEH) $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS)
+
+libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) xgcc$(exeext)
+ objext='$(objext)' \
+ OLDCC='$(OLDCC)' \
+ LIBGCC1='$(LIBGCC1)' \
+ LIB1FUNCS='$(LIB1FUNCS)' \
+ LIB1ASMFUNCS='$(LIB1ASMFUNCS)' \
+ LIB1FUNCS_EXTRA='$(LIB1FUNCS_EXTRA)' \
+ LIB2FUNCS='$(LIB2FUNCS)' \
+ LIB2FUNCS_EH='$(LIB2FUNCS_EH)' \
+ LIB2ADD='$(LIB2ADD)' \
+ FPBIT='$(FPBIT)' \
+ FPBIT_FUNCS='$(FPBIT_FUNCS)' \
+ DPBIT='$(DPBIT)' \
+ DPBIT_FUNCS='$(DPBIT_FUNCS)' \
+ MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \
+ EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \
+ $(SHELL) mklibgcc > tmp-libgcc.mk
+ mv tmp-libgcc.mk libgcc.mk
+
+# All the things that might cause us to want to recompile bits of libgcc.
+LIBGCC_DEPS = $(GCC_PASSES) $(LANGUAGES) stmp-int-hdrs $(STMP_FIXPROTO) \
+ libgcc.mk $(srcdir)/libgcc1.c $(srcdir)/libgcc2.c $(CONFIG_H) \
+ $(MACHMODE_H) longlong.h frame.h gbl-ctors.h config.status \
+ stmp-int-hdrs tsystem.h $(FPBIT) $(DPBIT) $(LIB2ADD)
+
+libgcc.a: $(LIBGCC_DEPS)
+ $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ AR_FOR_TARGET="$(AR_FOR_TARGET)" \
+ AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
+ AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
+ OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" CFLAGS="$(CFLAGS)" \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
+ RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
+ LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
+ INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
+ LIB1ASMSRC='$(LIB1ASMSRC)' \
+ -f libgcc.mk all
# Use the genmultilib shell script to generate the information the gcc
# driver program needs to select the library directory based on the
touch s-mlib
# Build multiple copies of libgcc.a, one for each target switch.
-stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
- frame.h tsystem.h \
- $(LIB2ADD) $(MACHMODE_H) longlong.h gbl-ctors.h config.status
- for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
- dir=`echo $$i | sed -e 's/;.*$$//'`; \
- flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
- $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
- AR_FOR_TARGET="$(AR_FOR_TARGET)" \
- AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
- AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
- AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- CC="$(CC)" CFLAGS="$(CFLAGS)" \
- RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
- RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
- LANGUAGES="$(LANGUAGES)" \
- HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
- LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \
- MULTILIB_CFLAGS="$${flags}" \
- LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \
- dir="$${dir}" stmp-multilib-sub; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- done
- touch stmp-multilib
-
-# Subroutine of stmp-multilib so make -n works.
-stmp-multilib-sub:
- rm -f $(LIBGCC2)
- if [ -d $(dir) ]; then \
- cd $(dir); \
- rm -f libgcc.a $(EXTRA_MULTILIB_PARTS); \
- else true; \
- fi
+stmp-multilib: $(LIBGCC_DEPS)
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
- AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- CC="$(CC)" CFLAGS="$(CFLAGS)" \
- HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
- LANGUAGES="$(LANGUAGES)" \
- LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC2)
- if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
- then true; \
- else rm -f $(LIBGCC1); \
- fi
- if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
- then true; \
- else \
- $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
- AR_FOR_TARGET="$(AR_FOR_TARGET)" \
- AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
- AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
- AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- CC="$(CC)" CFLAGS="$(CFLAGS)" \
- HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
- LANGUAGES="$(LANGUAGES)" \
- LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC1); \
- fi
- rm -rf tmplibgcc.a tmpcopy
- mkdir tmpcopy
- (cd tmpcopy; $(AR_EXTRACT_FOR_TARGET) ../$(LIBGCC2))
-# Some versions of ar (specifically the one in RISC/os 5.x), create an
-# unwritable table of contents file, and then print an error message when
-# the second ar command tries to overwrite this file. To avoid the error
-# message from ar, we make sure all files are writable.
- -(cd tmpcopy; chmod +w * > /dev/null 2>&1)
- if [ x$(LIBGCC1) != x ]; \
- then (cd tmpcopy; $(AR_EXTRACT_FOR_TARGET) ../$(LIBGCC1)); \
- else true; \
- fi
- (cd tmpcopy; $(AR_CREATE_FOR_TARGET) ../tmplibgcc.a *$(objext))
- rm -rf libgcc2.a tmpcopy
- if $(RANLIB_TEST_FOR_TARGET) ; then \
- $(RANLIB_FOR_TARGET) tmplibgcc.a; \
- else true; fi
- if [ -d $(dir) ]; then true; else mkdir $(dir); fi
- mv tmplibgcc.a $(dir)/libgcc.a
- for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
- $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
- AR_FOR_TARGET="$(AR_FOR_TARGET)" \
- AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
- AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
- AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
- CC="$(CC)" CFLAGS="$(CFLAGS)" \
- HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
- LANGUAGES="$(LANGUAGES)" \
- MULTILIB_CFLAGS="$(MULTILIB_CFLAGS)" T="t" t$${f}; \
- mv t$${f} $(dir)/$${f}; \
- else true; \
- fi; done
+ OLDCC="$(OLDCC)" CCLIBFLAGS="$(CCLIBFLAGS)" CFLAGS="$(CFLAGS)" \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)" \
+ RANLIB_TEST_FOR_TARGET="$(RANLIB_TEST_FOR_TARGET)" \
+ LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" \
+ INCLUDES="$(INCLUDES)" MAYBE_USE_COLLECT2="$(MAYBE_USE_COLLECT2)" \
+ CONFIG_H="$(CONFIG_H)" MACHMODE_H="$(MACHMODE_H)" \
+ LIB1ASMSRC='$(LIB1ASMSRC)' \
+ -f libgcc.mk all
+ touch stmp-multilib
# Compile two additional files that are linked with every program
# linked using GCC on systems using COFF or ELF, for the sake of C++
-fno-exceptions $(CRTSTUFF_T_CFLAGS) @inhibit_libc@ \
-c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext)
-# On some systems we also want to install versions of these files
-# compiled using PIC for use in shared libraries.
-$(T)crtbeginS.o $(T)crtendS.o: s-$(T)crtS ; @true
+# These are versions of crtbegin and crtend for shared libraries.
+$(T)crtbeginS.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
+ defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
+ -finhibit-size-directive -fno-inline-functions \
+ -fno-exceptions $(CRTSTUFF_T_CFLAGS_S) @inhibit_libc@ \
+ -c $(srcdir)/crtstuff.c -DCRT_BEGIN -DCRTSTUFFS_O \
+ -o $(T)crtbeginS$(objext)
-s-$(T)crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
+$(T)crtendS.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) \
defaults.h frame.h gbl-ctors.h stmp-int-hdrs tsystem.h
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
- -DCRT_BEGIN -DCRTSTUFFS_O -finhibit-size-directive \
- -fno-inline-functions -fno-exceptions @inhibit_libc@ -g0 \
- -c $(srcdir)/crtstuff.c -o $(T)crtbeginS$(objext)
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
- -DCRT_END -DCRTSTUFFS_O -finhibit-size-directive \
- -fno-inline-functions -fno-exceptions @inhibit_libc@ -g0 \
- -c $(srcdir)/crtstuff.c -o $(T)crtendS$(objext)
- touch s-$(T)crtS
-
-# Compile the start modules crt0.o and mcrt0.o that are linked with every program
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
+ -finhibit-size-directive -fno-inline-functions \
+ -fno-exceptions $(CRTSTUFF_T_CFLAGS_S) @inhibit_libc@ \
+ -c $(srcdir)/crtstuff.c -DCRT_END -DCRTSTUFFS_O \
+ -o $(T)crtendS$(objext)
+
+# Compile the start modules crt0.o and mcrt0.o that are linked with
+# every program
crt0.o: s-crt0 ; @true
mcrt0.o: s-crt0; @true
# C language specific files.
-c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h ggc.h \
- $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
+c-errors.o: c-errors.c $(CONFIG_H) system.h $(TREE_H) c-tree.h flags.h \
+ diagnostic.h
+c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h $(GGC_H) \
+ $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h \
+ toplev.h output.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
$(srcdir)/c-gperf.h: c-parse.gperf
gperf -L C -F ', 0, 0' -p -j1 -i 1 -g -o -t -G -N is_reserved_word \
-k1,3,$$ $(srcdir)/c-parse.gperf >tmp-gperf.h || ( \
- echo "See " $(website)/cvs.html#generated_files >&2 ; \
+ echo "See $(website)/cvs.html#generated_files" >&2 ; \
exit 1 )
$(SHELL) $(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
-c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h ggc.h \
- c-lex.h flags.h function.h output.h toplev.h defaults.h
+c-decl.o : c-decl.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
+ c-common.h $(GGC_H) c-lex.h flags.h function.h output.h $(EXPR_H) \
+ toplev.h defaults.h intl.h
c-typeck.o : c-typeck.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h \
flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h
-c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h ggc.h \
- c-lex.h toplev.h output.h function.h
+c-lang.o : c-lang.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-common.h \
+ $(GGC_H) c-lex.h toplev.h output.h function.h
c-lex.o : c-lex.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-lex.h c-tree.h \
c-common.h $(srcdir)/c-parse.h $(srcdir)/c-gperf.h c-pragma.h input.h \
- intl.h flags.h toplev.h output.h mbchar.h ggc.h
+ intl.h flags.h toplev.h output.h mbchar.h $(GGC_H)
c-aux-info.o : c-aux-info.c $(CONFIG_H) system.h $(TREE_H) c-tree.h \
c-common.h flags.h toplev.h
c-convert.o : c-convert.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h
c-pragma.o: c-pragma.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) function.h \
- defaults.h c-pragma.h toplev.h ggc.h
+ defaults.h c-pragma.h toplev.h $(GGC_H)
c-iterate.o: c-iterate.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) c-tree.h \
c-common.h flags.h toplev.h $(EXPR_H)
mbchar.o: mbchar.c $(CONFIG_H) system.h mbchar.h
graph.o: graph.c $(CONFIG_H) system.h toplev.h flags.h output.h $(RTL_H) \
function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h
-sbitmap.o: sbitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H)
+sbitmap.o: sbitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
+ $(BASIC_BLOCK_H)
COLLECT2_OBJS = collect2.o tlink.o hash.o intl.o underscore.o version.o
collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(COLLECT2_OBJS) $(LIBS)
collect2.o : collect2.c $(CONFIG_H) system.h gstab.h intl.h \
- $(srcdir)/../include/obstack.h $(DEMANGLE_H) collect2.h version.h
+ $(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
-c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
-tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h collect2.h
+tlink.o: tlink.c $(DEMANGLE_H) hash.h $(CONFIG_H) system.h collect2.h intl.h
hash.o: hash.c hash.h system.h toplev.h
vfprintf.o: $(srcdir)/../libiberty/vfprintf.c $(CONFIG_H) system.h
# A file used by all variants of C.
-c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
- c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) ggc.h \
+c-common.o : c-common.c $(CONFIG_H) system.h $(TREE_H) \
+ c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
+ $(EXPR_H)
+
+c-semantics.o : c-semantics.c $(CONFIG_H) system.h $(TREE_H) c-tree.h c-lex.h \
+ c-common.h flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \
$(EXPR_H)
# Language-independent files.
version.o: version.c version.h
ggc-common.o: ggc-common.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
- flags.h ggc.h varray.h hash.h
+ flags.h $(GGC_H) varray.h hash.h
ggc-simple.o: ggc-simple.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
- ggc.h varray.h
+ $(GGC_H) varray.h $(TIMEVAR_H)
-ggc-page.o: ggc-page.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
- ggc.h varray.h
+ggc-page.o: ggc-page.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h toplev.h \
+ $(GGC_H) varray.h $(TIMEVAR_H)
-ggc-none.o: ggc-none.c $(CONFIG_H) $(RTL_H) ggc.h
+ggc-none.o: ggc-none.c $(CONFIG_H) $(RTL_H) $(GGC_H)
-ggc-callbacks.o: ggc-callbacks.c $(CONFIG_H) $(RTL_H) $(TREE_H) ggc.h
+ggc-callbacks.o: ggc-callbacks.c $(CONFIG_H) $(RTL_H) $(TREE_H) $(GGC_H)
obstack.o: $(srcdir)/../libiberty/obstack.c $(CONFIG_H)
rm -f obstack.c
convert.o: convert.c $(CONFIG_H) system.h $(TREE_H) flags.h convert.h toplev.h
tree.o : tree.c $(CONFIG_H) system.h $(TREE_H) flags.h function.h toplev.h \
- ggc.h $(HASHTAB_H)
-print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) ggc.h
+ $(GGC_H) $(HASHTAB_H) output.h
+print-tree.o : print-tree.c $(CONFIG_H) system.h $(TREE_H) $(GGC_H)
stor-layout.o : stor-layout.c $(CONFIG_H) system.h $(TREE_H) flags.h \
- function.h $(EXPR_H) $(RTL_H) toplev.h ggc.h
+ function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H)
fold-const.o : fold-const.c $(CONFIG_H) system.h $(TREE_H) flags.h toplev.h \
$(RTL_H) ggc.h
-diagnostic.o : diagnostic.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) tm_p.h flags.h \
- input.h insn-attr.h insn-codes.h insn-config.h toplev.h intl.h
+diagnostic.o : diagnostic.c diagnostic.h \
+ $(CONFIG_H) system.h $(TREE_H) $(RTL_H) tm_p.h flags.h \
+ $(GGC_H) input.h $(INSN_ATTR_H) insn-codes.h insn-config.h toplev.h intl.h
toplev.o : toplev.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) function.h \
- flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
+ flags.h input.h $(INSN_ATTR_H) xcoffout.h defaults.h output.h diagnostic.h \
insn-codes.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h dwarfout.h \
- dwarf2out.h sdbout.h dbxout.h $(EXPR_H) $(BASIC_BLOCK_H) graph.h loop.h \
- except.h regs.h $(lang_options_files)
+ dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \
+ graph.h loop.h except.h regs.h $(TIMEVAR_H) $(lang_options_files)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
-DTARGET_NAME=\"$(target_alias)\" \
-c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
-rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h ggc.h toplev.h
+rtl.o : rtl.c $(CONFIG_H) system.h $(RTL_H) bitmap.h $(GGC_H) toplev.h
-print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) $(BASIC_BLOCK_H)
+print-rtl.o : print-rtl.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h \
+ $(BASIC_BLOCK_H)
rtlanal.o : rtlanal.c $(CONFIG_H) system.h $(RTL_H)
errors.o : errors.c $(CONFIG_H) system.h errors.h
varasm.o : varasm.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h \
function.h defaults.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
- xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h ggc.h
+ xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h $(GGC_H)
function.o : function.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
function.h insn-flags.h insn-codes.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
- insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h ggc.h
+ insn-config.h $(RECOG_H) output.h toplev.h except.h hash.h $(GGC_H)
stmt.o : stmt.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
insn-flags.h insn-config.h insn-codes.h hard-reg-set.h $(EXPR_H) except.h \
- $(LOOP_H) $(RECOG_H) toplev.h output.h varray.h ggc.h
+ $(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H)
except.o : except.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
function.h insn-flags.h $(EXPR_H) $(REGS_H) hard-reg-set.h \
- insn-config.h $(RECOG_H) output.h except.h toplev.h intl.h ggc.h
+ insn-config.h $(RECOG_H) output.h except.h toplev.h intl.h $(GGC_H)
expr.o : expr.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h function.h \
$(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h $(RECOG_H) \
output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
- ggc.h intl.h
+ reload.h $(GGC_H) intl.h
builtins.o : builtins.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
function.h $(REGS_H) insn-flags.h insn-codes.h $(EXPR_H) insn-config.h \
$(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
except.h
calls.o : calls.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h $(EXPR_H) \
- insn-flags.h $(REGS_H) toplev.h output.h function.h
+ insn-flags.h $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H)
expmed.o : expmed.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) real.h toplev.h
explow.o : explow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-codes.h toplev.h function.h
optabs.o : optabs.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h $(EXPR_H) $(RECOG_H) reload.h \
- toplev.h ggc.h real.h
+ toplev.h $(GGC_H) real.h
dbxout.o : dbxout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h $(REGS_H) \
insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
toplev.h
sdbout.o : sdbout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) flags.h except.h \
function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) defaults.h real.h \
- insn-config.h $(srcdir)/../include/obstack.h xcoffout.h c-pragma.h \
+ insn-config.h $(OBSTACK_H) xcoffout.h c-pragma.h \
sdbout.h toplev.h
dwarfout.o : dwarfout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf.h \
flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
dwarf2out.o : dwarf2out.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) dwarf2.h \
flags.h insn-config.h reload.h output.h defaults.h \
hard-reg-set.h $(REGS_H) $(EXPR_H) toplev.h dwarf2out.h varray.h \
- ggc.h except.h
+ $(GGC_H) except.h
xcoffout.o : xcoffout.c $(CONFIG_H) system.h $(TREE_H) $(RTL_H) xcoffout.h \
- flags.h toplev.h output.h dbxout.h ggc.h
+ flags.h toplev.h output.h dbxout.h $(GGC_H)
emit-rtl.o : emit-rtl.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
- function.h $(REGS_H) insn-config.h $(RECOG_H) real.h ggc.h \
+ function.h $(REGS_H) insn-config.h $(RECOG_H) real.h $(GGC_H) \
$(EXPR_H) $(srcdir)/../include/obstack.h hard-reg-set.h bitmap.h toplev.h \
$(HASHTAB_H)
real.o : real.c $(CONFIG_H) system.h $(TREE_H) toplev.h
intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H)
jump.o : jump.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h $(REGS_H) \
insn-config.h insn-flags.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \
- toplev.h insn-attr.h
+ toplev.h $(INSN_ATTR_H)
simplify-rtx.o : simplify-rtx.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) \
hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \
- output.h function.h cselib.h ggc.h $(srcdir)/../include/obstack.h
+ output.h function.h cselib.h ggc.h $(OBSTACK_H)
cse.o : cse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
- real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h ggc.h
+ real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h output.h function.h $(GGC_H)
gcse.o : gcse.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h \
flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) \
function.h output.h toplev.h
hard-reg-set.h flags.h insn-config.h $(RECOG_H) $(BASIC_BLOCK_H)
resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h system.h \
$(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h \
- insn-attr.h
+ $(INSN_ATTR_H) except.h
lcm.o : lcm.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) hard-reg-set.h flags.h \
- real.h insn-config.h insn-attr.h $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
+ real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H)
ssa.o : ssa.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) $(BASIC_BLOCK_H) \
output.h insn-config.h
-profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) flags.h insn-flags.h \
- gcov-io.h $(TREE_H) output.h $(REGS_H) toplev.h function.h insn-config.h \
- ggc.h
+conflict.o : conflict.c $(CONFIG_H) system.h $(OBSTACK_H) $(HASHTAB_H) \
+ $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H)
+profile.o : profile.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ insn-flags.h insn-config.h output.h $(REGS_H) $(EXPR_H) function.h \
+ gcov-io.h toplev.h $(GGC_H) hard-reg-set.h $(BASIC_BLOCK_H)
loop.o : loop.c $(CONFIG_H) system.h $(RTL_H) flags.h $(LOOP_H) insn-config.h \
insn-flags.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) real.h \
$(BASIC_BLOCK_H) function.h toplev.h varray.h except.h cselib.h
unroll.o : unroll.c $(CONFIG_H) system.h $(RTL_H) insn-config.h function.h \
$(INTEGRATE_H) $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) $(LOOP_H) toplev.h \
- varray.h
+ hard-reg-set.h varray.h $(BASIC_BLOCK_H)
flow.o : flow.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h insn-config.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \
insn-flags.h function.h except.h $(EXPR_H)
combine.o : combine.c $(CONFIG_H) system.h $(RTL_H) flags.h function.h \
- insn-config.h insn-flags.h insn-codes.h insn-attr.h $(REGS_H) $(EXPR_H) \
+ insn-config.h insn-flags.h insn-codes.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
$(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h
regclass.o : regclass.c $(CONFIG_H) system.h $(RTL_H) hard-reg-set.h flags.h \
$(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h real.h \
- toplev.h function.h output.h ggc.h
+ toplev.h function.h output.h $(GGC_H)
local-alloc.o : local-alloc.c $(CONFIG_H) system.h $(RTL_H) flags.h \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \
- output.h function.h insn-attr.h toplev.h
+ output.h function.h $(INSN_ATTR_H) toplev.h
bitmap.o : bitmap.c $(CONFIG_H) system.h $(RTL_H) flags.h $(BASIC_BLOCK_H) \
$(REGS_H)
global.o : global.c $(CONFIG_H) system.h $(RTL_H) flags.h reload.h function.h \
$(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
$(RECOG_H) reload.h $(EXPR_H) toplev.h
reorg.o : reorg.c $(CONFIG_H) system.h $(RTL_H) conditions.h hard-reg-set.h \
- $(BASIC_BLOCK_H) $(REGS_H) insn-config.h insn-attr.h insn-flags.h \
+ $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) insn-flags.h \
$(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h
alias.o : alias.c $(CONFIG_H) system.h $(RTL_H) flags.h hard-reg-set.h \
- $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h ggc.h function.h \
+ $(REGS_H) toplev.h output.h $(EXPR_H) insn-flags.h $(GGC_H) function.h \
cselib.h $(TREE_H)
regmove.o : regmove.c $(CONFIG_H) system.h $(RTL_H) insn-config.h \
- $(RECOG_H) output.h reload.h $(REGS_H) hard-reg-set.h flags.h function.h \
+ $(RECOG_H) output.h $(REGS_H) hard-reg-set.h flags.h function.h \
$(EXPR_H) insn-flags.h $(BASIC_BLOCK_H) toplev.h
haifa-sched.o : haifa-sched.c $(CONFIG_H) system.h $(RTL_H) \
$(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \
- insn-attr.h toplev.h $(RECOG_H) except.h
+ $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h
final.o : final.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h intl.h \
- $(REGS_H) $(RECOG_H) conditions.h insn-config.h insn-attr.h function.h \
+ $(REGS_H) $(RECOG_H) conditions.h insn-config.h $(INSN_ATTR_H) function.h \
real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
- dbxout.h
+ dbxout.h $(BASIC_BLOCK_H)
recog.o : recog.c $(CONFIG_H) system.h $(RTL_H) function.h $(BASIC_BLOCK_H) \
- $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h insn-attr.h \
- insn-flags.h insn-codes.h real.h toplev.h output.h resource.h
+ $(REGS_H) $(RECOG_H) hard-reg-set.h flags.h insn-config.h $(INSN_ATTR_H) \
+ insn-flags.h insn-codes.h real.h toplev.h output.h
reg-stack.o : reg-stack.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) $(RECOG_H) \
$(REGS_H) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
varray.h function.h
-dyn-string.o: dyn-string.c dyn-string.h $(CONFIG_H) system.h
predict.o: predict.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
$(RECOG_H) insn-flags.h function.h except.h $(EXPR_H)
-lists.o: lists.c $(CONFIG_H) system.h toplev.h $(RTL_H) ggc.h
+lists.o: lists.c $(CONFIG_H) system.h toplev.h $(RTL_H) $(GGC_H)
bb-reorder.o : bb-reorder.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \
$(RECOG_H) insn-flags.h function.h except.h $(EXPR_H)
-
-$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) ggc.h \
+timevar.o : timevar.c $(CONFIG_H) system.h $(TIMEVAR_H) flags.h intl.h
+regrename.o : regrename.c $(CONFIG_H) system.h $(RTL_H) $(TREE_H) flags.h \
+ insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h \
+ $(RECOG_H) function.h resource.h
+ifcvt.o : ifcvt.c $(CONFIG_H) system.h $(RTL_H) $(REGS_H) \
+ flags.h insn-config.h function.h $(RECOG_H) $(BASIC_BLOCK_H) $(EXPR_H) \
+ output.h
+$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) $(GGC_H) \
$(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \
- insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
+ insn-flags.h output.h $(INSN_ATTR_H) insn-codes.h system.h toplev.h function.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
# Build auxiliary files that support ecoff format.
touch s-peep
insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) $(REGS_H) real.h \
- output.h insn-attr.h insn-config.h system.h toplev.h $(RECOG_H)
+ output.h $(INSN_ATTR_H) insn-config.h system.h toplev.h $(RECOG_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
insn-attr.h: s-attr ; @true
$(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
touch s-attrtab
-insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) ggc.h $(REGS_H) real.h \
- conditions.h hard-reg-set.h insn-config.h insn-flags.h insn-attr.h \
+insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) $(GGC_H) $(REGS_H) real.h \
+ conditions.h hard-reg-set.h insn-config.h insn-flags.h $(INSN_ATTR_H) \
output.h $(RECOG_H) function.h insn-codes.h system.h toplev.h flags.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
$(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c
touch s-output
-genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h ggc.h
+genrtl.o : genrtl.c $(CONFIG_H) $(RTL_H) system.h $(GGC_H)
genrtl.c genrtl.h : s-genrtl
@true # force gnu make to recheck modification times.
$(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
mv tmp-$@ $@
+gensupport.o: gensupport.c $(RTL_H) $(OBSTACK_H) system.h errors.h gensupport.h
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gensupport.c
+
genconfig : genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genconfig.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) system.h errors.h
+genconfig.o : genconfig.c $(RTL_H) $(build_xm_file) \
+ system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
genflags : genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genflags.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genflags.o : genflags.c $(RTL_H) $(build_xm_file) system.h errors.h
+genflags.o : genflags.c $(RTL_H) $(OBSTACK_H) $(build_xm_file) \
+ system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
gencodes : gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencodes.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) system.h errors.h
+gencodes.o : gencodes.c $(RTL_H) $(build_xm_file) \
+ system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
genemit : genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genemit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h errors.h
+genemit.o : genemit.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
genopinit : genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genopinit.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) system.h errors.h
+genopinit.o : genopinit.c $(RTL_H) $(build_xm_file) \
+ system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
genrecog : genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genrecog.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) system.h errors.h
- $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
-
+genrecog.o : genrecog.c $(RTL_H) $(build_xm_file) \
+ system.h errors.h gensupport.h
+ $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
genextract : genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genextract.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genextract.o : genextract.c $(RTL_H) $(build_xm_file) system.h insn-config.h errors.h
+genextract.o : genextract.c $(RTL_H) $(build_xm_file) \
+ system.h insn-config.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
genpeep : genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genpeep.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h errors.h
+genpeep.o : genpeep.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
genattr : genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattr.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h errors.h
+genattr.o : genattr.c $(RTL_H) $(build_xm_file) system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) system.h errors.h ggc.h
+genattrtab.o : genattrtab.c $(RTL_H) $(OBSTACK_H) $(build_xm_file) \
+ system.h errors.h $(GGC_H) gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
genoutput : genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genoutput.o $(HOST_RTL) $(HOST_PRINT) $(HOST_ERRORS) $(HOST_LIBS)
-genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) system.h errors.h
+genoutput.o : genoutput.c $(RTL_H) $(build_xm_file) \
+ system.h errors.h gensupport.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
gengenrtl : gengenrtl.o $(HOST_LIBDEPS)
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, alloca.o, etc.
$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) system.h $(RTL_H) \
- bitmap.h ggc.h toplev.h
+ bitmap.h $(GGC_H) toplev.h
rm -f $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
$(HOST_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(CONFIG_H) system.h $(RTL_H) \
- flags.h $(BASIC_BLOCK_H) $(REGS_H)
+ flags.h bitmap.h
rm -f $(HOST_PREFIX)bitmap.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c > $(HOST_PREFIX)bitmap.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)bitmap.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/ggc-none.c > $(HOST_PREFIX)ggc-none.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)ggc-none.c
-
#\f
# Remake internationalization support.
-DLOCALEDIR=\"$(localedir)\" \
-c `echo $(srcdir)/intl.c | sed 's,^\./,,'`
-# This is needed to when doing a partial build after a `make clean'.
-# libintl.a does not depend on intl.all,
-# as that would force a lot of recompiling.
-$(top_builddir)/intl/libintl.a:
- @echo "$(MAKE) intl.all"
- @$(MAKE) $(FLAGS_TO_PASS) intl.all
+$(top_builddir)/intl/libintl.a: intl.all
# Make sure all the headers are there for xgettext to scan.
$(INTL_TARGETS): $(srcdir)/c-gperf.h \
- $(srcdir)/c-parse.c $(srcdir)/c-parse.h $(srcdir)/cexp.c
+ $(srcdir)/c-parse.c $(srcdir)/c-parse.h
intl.all intl.install intl.uninstall intl.distdir \
intl.mostlyclean intl.clean intl.distclean intl.maintainer-clean:
target=`expr $@ : 'intl.\(.*\)'` && \
echo "(cd $$d && $(MAKE) $$target)" && \
(cd $$d && AWK='$(AWK)' $(MAKE) $(SUBDIR_FLAGS_TO_PASS) $$target); \
+ if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
done
# intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
#\f
# Remake cpp and protoize.
-# Making the preprocessor
-cpp$(exeext): $(CCCP)$(exeext)
- -rm -f cpp$(exeext)
- $(LN) $(CCCP)$(exeext) cpp$(exeext)
-CCCP_OBJS = cccp.o cexp.o intl.o prefix.o version.o @extra_cpp_objs@ mbchar.o
-cccp$(exeext): $(CCCP_OBJS) $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(CCCP_OBJS) $(LIBS)
-cexp.o: $(srcdir)/cexp.c $(CONFIG_H) system.h mbchar.h
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
-$(srcdir)/cexp.c: $(srcdir)/cexp.y
- cd $(srcdir); $(BISON) -o cexp.c cexp.y
-
PREPROCESSOR_DEFINES = \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(gcc_tooldir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\"
-# We use $(libsubdir)/$(unlibsubdir) to match the
-# -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
-cccp.o: cccp.c $(CONFIG_H) intl.h pcp.h version.c config.status system.h \
- mbchar.h prefix.h Makefile.in version.h
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- $(PREPROCESSOR_DEFINES) \
- -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`
-LIBCPP_OBJS = cpplib.o cpphash.o cpperror.o cppexp.o cppfiles.o \
- cppinit.o cppulp.o cpplex.o mkdeps.o \
- prefix.o version.o mbchar.o @extra_cpp_objs@
+LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o \
+ cpphash.o cpperror.o cppinit.o cppulp.o cppdefault.o \
+ mkdeps.o prefix.o version.o mbchar.o @extra_cpp_objs@
-LIBCPP_DEPS = cpplib.h cpphash.h intl.h system.h
-HASHTAB_H = $(srcdir)/../include/hashtab.h
+LIBCPP_DEPS = cpplib.h cpphash.h intl.h system.h
# All the other archives built/used by this makefile are for targets. This
# one is strictly for the host.
$(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS)
if $(RANLIB_TEST) ; then $(RANLIB) libcpp.a ; else true ; fi
-cppmain$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cppmain$(exeext) cppmain.o \
+cpp$(exeext): cppmain.o intl.o libcpp.a $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cpp$(exeext) cppmain.o \
intl.o libcpp.a $(LIBS)
cppmain.o: cppmain.c $(CONFIG_H) cpplib.h intl.h system.h
cpperror.o: cpperror.c $(CONFIG_H) $(LIBCPP_DEPS)
cppexp.o: cppexp.c $(CONFIG_H) $(LIBCPP_DEPS)
cpplex.o: cpplex.c $(CONFIG_H) $(LIBCPP_DEPS)
-cpplib.o: cpplib.c $(CONFIG_H) $(LIBCPP_DEPS) $(HASHTAB_H)
-cpphash.o: cpphash.c $(CONFIG_H) $(LIBCPP_DEPS) $(HASHTAB_H)
-cppfiles.o: cppfiles.c $(CONFIG_H) $(LIBCPP_DEPS) $(HASHTAB_H) mkdeps.h
-
-cppinit.o: cppinit.c $(CONFIG_H) $(LIBCPP_DEPS) $(HASHTAB_H) mkdeps.h \
- prefix.h output.h Makefile version.h
+cppmacro.o: cppmacro.c $(CONFIG_H) $(LIBCPP_DEPS)
+cpplib.o: cpplib.c $(CONFIG_H) $(LIBCPP_DEPS) $(OBSTACK_H)
+cpphash.o: cpphash.c $(CONFIG_H) $(LIBCPP_DEPS) $(OBSTACK_H)
+cppfiles.o: cppfiles.c $(CONFIG_H) $(LIBCPP_DEPS) $(SPLAY_TREE_H) mkdeps.h
+cppinit.o: cppinit.c $(CONFIG_H) $(LIBCPP_DEPS) cppdefault.h \
+ mkdeps.h prefix.h output.h version.h
+
+cppdefault.o: cppdefault.c $(CONFIG_H) system.h cppdefault.h Makefile
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(PREPROCESSOR_DEFINES) \
- -c `echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
+ -c `echo $(srcdir)/cppdefault.c | sed 's,^\./,,'`
mkdeps.o: mkdeps.c $(CONFIG_H) system.h mkdeps.h
+# The traditional mode preprocessor, a separate program for ease of
+# maintenance. Some code is shared with the ISO-C cpp.
+tradcpp$(exeext): tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o tradcpp$(exeext) \
+ tradcpp.o tradcif.o cppdefault.o version.o intl.o $(LIBS)
+
+tradcpp.o: tradcpp.c $(CONFIG_H) system.h version.h cppdefault.h
+tradcif.o: $(srcdir)/tradcif.c $(CONFIG_H) system.h
+
+$(srcdir)/tradcif.c: $(srcdir)/tradcif.y
+ cd $(srcdir); $(BISON) $(BISONFLAGS) -o tradcif.c tradcif.y
+
# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).
SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
stmp-int-hdrs
-rm -f SYSCALLS.c tmp-SYSCALLS.s
- cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
+ sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
+ $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c
-rm -f SYSCALLS.c tmp-SYSCALLS.s
deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
if [ -d $(SYSTEM_HEADER_DIR) ]; \
then \
- CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
+ CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -isystem include -isystem ${SYSTEM_HEADER_DIR}"; \
export CC; \
$(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \
mv tmp-deduced.h deduced.h; \
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
- cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
+ sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
+ deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
mv tmp-fixtmp.c fixtmp.c
$(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
| sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
mv xsys-protos.hT xsys-protos.h
rm -rf fixtmp.c
-fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
+# This is nominally a 'build' program, but it's run only when host==build,
+# so we can (indeed, must) use $(LIBDEPS) and $(LIBS).
+fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(LIBDEPS) \
libcpp.a
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
- scan-decls.o scan.o libcpp.a $(HOST_LIBS) ../libiberty/libiberty.a
+ scan-decls.o scan.o libcpp.a $(LIBS)
-fix-header.o: fix-header.c $(srcdir)/../include/obstack.h scan.h \
+fix-header.o: fix-header.c $(OBSTACK_H) scan.h \
xsys-protos.h $(build_xm_file) system.h cpplib.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
# The if statement is so that we don't run fixproto a second time
# if it has already been run on the files in `include'.
stmp-fixproto: fixhdr.ready fixproto stmp-int-hdrs
- @echo "Various warnings and error messages from fixproto are normal"
- -if [ -f include/fixed ] ; then true; \
+ if [ -f include/fixed ] ; then true; \
else \
: This line works around a 'make' bug in BSDI 1.1.; \
FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
export mkinstalldirs; \
if [ -d $(SYSTEM_HEADER_DIR) ] ; then \
$(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
+ if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \
else true; fi; \
touch include/fixed; \
fi
#\f
# Remake the info files.
-doc: info
+doc: $(BUILD_INFO) gccbug
info: cpp.info gcc.info lang.info
cpp.info: $(srcdir)/cpp.texi
INSTALL: $(srcdir)/install1.texi $(srcdir)/install.texi
cd $(srcdir); $(MAKEINFO) -D INSTALLONLY \
- --no-split -o INSTALL install1.texi
+ --no-split --no-headers -o INSTALL install1.texi
#\f
# Deletion of files made during compilation.
# There are four levels of this:
-rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
-rm -f $(HOST_PREFIX_1)obstack.c
# Delete the temp files made in the course of building libgcc.a.
- -rm -f tmplibgcc* tmpcopy xlimits.h libgcc1-test
+ -rm -f xlimits.h libgcc1-test
for name in $(LIB1FUNCS); do rm -f $${name}.c; done
# Delete other built files.
- -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
+ -rm -f t-float.h-cross xsys-protos.hT
# Delete the stamp and temporary files.
-rm -f s-* tmp-* stamp-* stmp-*
-rm -f */stamp-* */tmp-*
# Delete files generated for fixproto
-rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
gen-protos fixproto.list fixtmp.* fixhdr.ready
+# Delete files generated for fixincl
+ -rm -rf fixincl fixinc.sh specs.ready
+ (cd fixinc && $(MAKE) clean)
# Delete unwanted output files from TeX.
-rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
-rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
# that don't exist in the distribution.
INTL_CLEAN = intl.clean
clean: mostlyclean $(INTL_CLEAN) lang.clean
- -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
- -rm -f libgcc1.null
+ -rm -f libgcc.a
+ -rm -rf libgcc
-rm -f *.dvi
-rm -f */*.dvi
-if [ -f md.pre-cpp ]; then \
$(MAKE) INTL_DISTCLEAN= INTL_CLEAN= INTL_MOSTLYCLEAN= \
intl.maintainer-clean lang.maintainer-clean distclean
-rm -f c-parse.y c-gperf.h
- -rm -f c-parse.c c-parse.h c-parse.output
- -rm -f cexp.c cexp.output TAGS
+ -rm -f c-parse.c c-parse.h c-parse.output TAGS
-rm -f cpp.info* cpp.??s cpp.*aux
-rm -f gcc.info* gcc.??s gcc.*aux
#\f
# Install the driver last so that the window when things are
# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
- $(INSTALL_CPP) install-man install-info intl.install lang.install-normal \
- install-driver
+ $(INSTALL_CPP) install-man $(INSTALL_INFO) intl.install \
+ lang.install-normal install-driver
# Do nothing while making gcc with a cross-compiler. The person who
# makes gcc for the target machine has to know how to put a complete
fi
-rm -f $(libsubdir)/cpp$(exeext)
$(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
+ -rm -f $(libsubdir)/tradcpp$(exeext)
+ $(INSTALL_PROGRAM) tradcpp$(exeext) $(libsubdir)/tradcpp$(exeext)
# Install gcov if it was compiled.
-if [ -f gcov$(exeext) ]; \
then \
-chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
# Install the man pages.
-install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
+install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cpp.1 lang.install-man
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
chmod a-x $(man1dir)/$(GCC_INSTALL_NAME)$(manext); \
fi
- -rm -f $(man1dir)/cccp$(manext)
- -$(INSTALL_DATA) $(srcdir)/cccp.1 $(man1dir)/cccp$(manext)
- -chmod a-x $(man1dir)/cccp$(manext)
+ -rm -f $(man1dir)/cpp$(manext)
+ -$(INSTALL_DATA) $(srcdir)/cpp.1 $(man1dir)/cpp$(manext)
+ -chmod a-x $(man1dir)/cpp$(manext)
# Install the library.
install-libgcc: libgcc.a installdirs
-rm -rf $(bindir)/$(GCOV_INSTALL_NAME)$(exeext)
-rm -rf $(man1dir)/$(GCC_INSTALL_NAME)$(manext)
-rm -rf $(man1dir)/$(GCC_CROSS_NAME)$(manext)
- -rm -rf $(man1dir)/cccp$(manext)
+ -rm -rf $(man1dir)/cpp$(manext)
-rm -rf $(man1dir)/protoize$(manext)
-rm -rf $(man1dir)/unprotoize$(manext)
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
TAGS: force
cd $(srcdir); \
mkdir tmp-tags; \
- mv -f c-parse.[ch] cexp.c =*.[chy] tmp-tags; \
+ mv -f c-parse.[ch] =*.[chy] tmp-tags; \
etags *.y *.h *.c; \
mv tmp-tags/* .; \
rmdir tmp-tags
# This target exists to do the initial work before the language specific
# stuff gets done.
distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
- $(srcdir)/c-parse.c $(srcdir)/cexp.c $(srcdir)/config.in \
- $(srcdir)/version.c TAGS
+ $(srcdir)/c-parse.c $(srcdir)/config.in $(srcdir)/version.c TAGS
@case '$(USE_NLS)' in \
yes) ;; \
*) echo "configure with --enable-nls before making a distribution"; \
test -f $(srcdir)/$$file && $(LN_S) $(srcdir)/$$file tmp; \
done
if test "$(srcdir)" != "." ; then \
- for file in c-parse.c cexp.c ; do \
+ for file in c-parse.c ; do \
test -f ./$$file && $(LN_S) ../$$file tmp; \
done; \
fi
# The -P option assumes this is GNU diff.
diff:
diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
- -x cexp.c -x -x TAGS -x INSTALL \
- -x configure -x config.in \
+ -x TAGS -x INSTALL -x configure -x config.in \
-x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
-x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
$(LANG_DIFF_EXCLUDES) \
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
- $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)"
+ $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" LANG_LIB2FUNCS=
$(MAKE) stage1
-if test $@ = bootstrap-lean; then cd stage1 ; rm -f $(VOL_FILES); else true; fi
# This used to define ALLOCA as empty, but that would lead to bad results