# Makefile for GNU C compiler.
-# Copyright (C) 1987, 88, 90-94, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1987, 88, 90-96, 1997 Free Software Foundation, Inc.
#This file is part of GNU CC.
#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING. If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+#the Free Software Foundation, 59 Temple Place - Suite 330,
+#Boston MA 02111-1307, USA.
# The targets for external use include:
# all, doc, proto, install, install-cross, install-cross-rest,
# This is overridden by configure.
LANGUAGES = c objective-c proto
+# Selection of languages to be made during stage1 build.
+# This is overridden by configure.
+BOOT_LANGUAGES = c
+
ALLOCA =
ALLOCA_FLAGS =
ALLOCA_FINISH = true
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
# XCFLAGS is used for most compilations but not when using the GCC just built.
+# TCFLAGS is used for compilations with the GCC just built.
XCFLAGS =
+TCFLAGS =
CFLAGS = -g
BOOT_CFLAGS = -O $(CFLAGS)
# These exists to be overridden by the x-* and t-* files, respectively.
# These permit overriding just for certain files.
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
-SYMLINK = ln -s
MAKEINFO = makeinfo
+MAKEINFOFLAGS =
TEXI2DVI = texi2dvi
# For GNUmake: let us decide what gets passed to recursive makes.
MAKEOVERRIDES =
# install-headers-tar or install-headers-cpio.
INSTALL_HEADERS_DIR = install-headers-tar
+# Header files that are made available under the same name
+# to programs compiled with GCC.
+USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
+ $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \
+ $(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \
+ $(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \
+ $(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-pa.h \
+ $(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \
+ $(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \
+ $(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \
+ $(srcdir)/ginclude/proto.h $(srcdir)/ginclude/va-sh.h $(EXTRA_HEADERS) \
+ $(LANG_EXTRA_HEADERS)
+
+# Target to use whe installing assert.h. Some systems may
+# want to set this empty.
+INSTALL_ASSERT_H = install-assert-h
+
# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -I./include to find, e.g., stddef.h.
-GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include
+GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS)
# Special flags for compiling enquire.
# We disable optimization to make floating point more reliable.
# Sed command to transform gcc to installed name. Overwritten by configure.
program_transform_name = -e s,x,x,
-program_transform_cross_name = -e s,^,$(target)-,
+program_transform_cross_name = -e s,^,$(target_alias)-,
# Tools to use when building a cross-compiler.
# These are used because `configure' appends `cross-make'
PREMADE_ATTRTAB =
target= ... `configure' substitutes actual target name here.
+target_alias= ... `configure' substitutes specified target name here.
xmake_file= ... `configure' substitutes actual x- file name here.
tmake_file= ... `configure' substitutes actual t- file name here.
out_file= ... `configure' substitutes actual out file name here.
host_xm_file= ... `configure' substitutes actual host xm- file name here.
lang_specs_files= ... `configure' substitutes actual lang spec file names here.
lang_options_files= ... `configure' puts actual lang options file names here.
+OBJC_THREAD_FILE= ... `configure' puts actual objc thread file name here.
version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c`
mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
# Directory in which to put the directories used by the compiler.
libdir = $(exec_prefix)/lib
# Directory in which the compiler finds executables, libraries, etc.
-libsubdir = $(libdir)/gcc-lib/$(target)/$(version)
+libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(version)
# Directory in which the compiler finds g++ includes.
-gxx_include_dir= $(libdir)/g++-include
+gxx_include_dir= $(prefix)/include/g++
+# Directory in which the old g++ header files may be found.
+old_gxx_include_dir= $(libdir)/g++-include
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
# assertdir is overridden in cross-make.
infodir = $(prefix)/info
# Extension (if any) to put in installed man-page filename.
manext = .1
-exeext =
objext = .o
-oldobjext = .o
+exeext =
# Directory in which to put man pages.
mandir = $(prefix)/man/man1
# Directory in which to find other cross-compilation tools and headers.
# Used in install-cross.
-tooldir = $(exec_prefix)/$(target)
+tooldir = $(exec_prefix)/$(target_alias)
# Dir for temp files.
tmpdir = /tmp
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
# so that -g1 will be tested.
-LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) -g1
+LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) -g1 -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED
# Additional options to use when compiling libgcc2.a.
# Some targets override this to -Iinclude
LIBGCC2_INCLUDES =
+# Additional target-dependent options for compiling libgcc2.a.
+TARGET_LIBGCC2_CFLAGS =
+
# Things which must be built before building libgcc2.a.
# Some targets override this to stmp-int-hdrs
LIBGCC2_DEPS =
# compiler proper (cc1, cc1obj, cc1plus).
EXTRA_OBJS =
+# List of extra object files that should be compiled and linked with
+# the gcc driver.
+EXTRA_GCC_OBJS =
+
# List of additional header files to install.
# Often this is edited directly by `configure'.
EXTRA_HEADERS =
LIB2FUNCS_EXTRA =
# Default float.h source to use for cross-compiler.
+# This is overidden by configure.
CROSS_FLOAT_H=float.h-cross
# Program to convert libraries.
# List of things which should already be built whenever we try to use xgcc
# to compile anything (without linking).
-GCC_PASSES=xgcc cc1 cpp $(EXTRA_PASSES)
+GCC_PASSES=xgcc$(exeext) cc1$(exeext) cpp$(exeext) $(EXTRA_PASSES)
# List of things which should already be built whenever we try to use xgcc
# to link anything.
# Extra flags to use when compiling crt{begin,end}.o.
CRTSTUFF_T_CFLAGS =
+# Extra flags to use when compiling [m]crt0.o.
+CRT0STUFF_T_CFLAGS =
+
# End of variables for you to override.
# Definition of `all' is here so that new rules inserted by sed
LANG_MAKEFILES =
LANG_STAGESTUFF =
LANG_DIFF_EXCLUDES =
+LANG_LIB2FUNCS =
+LANG_EXTRA_HEADERS =
# Flags to pass to recursive makes.
# CC is set by configure. Hosts without symlinks need special handling
"BISONFLAGS=$(BISONFLAGS)" \
"CC=set-by-configure" \
"CFLAGS=$(CFLAGS)" \
+ "CLIB=$(CLIB)" \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
"SHELL=$(SHELL)" \
+ "STAGE_PREFIX=set-by-configure" \
+ "exeext=$(exeext)" \
+ "objext=$(objext)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
# Files specific to the C interpreter bytecode compiler(s).
BC_OBJS = bc-emit.o bc-optab.o
+# Bytecode header files constructed at build time; vmsconfig.com wants this.
+BC_ALL = bc-arity.h bc-opcode.h bc-opname.h
+
# Language-independent object files.
OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
- function.o stmt.o expr.o calls.o expmed.o explow.o optabs.o varasm.o \
- rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o \
- dbxout.o sdbout.o dwarfout.o xcoffout.o \
+ function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
+ varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o \
+ dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o \
integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \
regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \
insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o \
#CCCP=cppmain
# Files to be copied away after each stage in building.
-STAGESTUFF = *.o insn-flags.h insn-config.h insn-codes.h \
+STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attrtab.c insn-opinit.c \
- stamp-flags stamp-config stamp-codes \
+ stamp-flags stamp-config stamp-codes stamp-mlib \
stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \
- stamp-attr stamp-attrtab stamp-opinit stamp-proto \
+ stamp-attr stamp-attrtab stamp-opinit stamp-proto stamp-crt stamp-crtS stamp-crt0 \
genemit$(exeext) genoutput$(exeext) genrecog$(exeext) genextract$(exeext) \
genflags$(exeext) gencodes$(exeext) genconfig$(exeext) genpeep$(exeext) \
genattrtab$(exeext) genattr$(exeext) genopinit$(exeext) \
- bc-arity.h bc-opcode.h bc-opname.h \
+ $(BC_ALL) \
stamp-bcarity stamp-bcopcode stamp-bcopname \
bi-arity$(exeext) bi-opcode$(exeext) bi-opname$(exeext) \
- $(GCC_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) $(CCCP) \
- cc1obj$(exeext) enquire$(exeext) protoize$(exeext) unprotoize$(exeext) \
+ $(GCC_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
+ $(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
+ protoize$(exeext) unprotoize$(exeext) \
specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
+ *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
+ *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack \
+ *.[si] \
$(LANG_STAGESTUFF)
# Members of libgcc1.a.
_fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
_fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
_fixtfdi _fixunstfdi _floatditf \
- __gcc_bcmp _varargs _eprintf _op_new _op_vnew _new_handler _op_delete \
- _op_vdel _bb _shtab _clear_cache _trampoline __main _exit _ctors _eh \
- _pure
-
-# Header files that are made available under the same name
-# to programs compiled with GCC.
-USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
- $(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \
- $(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \
- $(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \
- $(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-pa.h \
- $(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \
- $(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \
- $(srcdir)/ginclude/iso646.h \
- $(srcdir)/ginclude/proto.h $(EXTRA_HEADERS)
+ __gcc_bcmp _varargs __dummy _eprintf _op_new _op_vnew _new_handler \
+ _op_delete _op_vdel _bb _shtab _clear_cache _trampoline __main _exit \
+ _ctors _eh _pure
# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
RTL_H = rtl.h rtl.def machmode.h machmode.def
TREE_H = tree.h real.h tree.def machmode.h machmode.def
BYTECODE_H = bytecode.h bc-emit.h bc-optab.h
+
+# "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
+T =
\f
# Language makefile fragments.
.SUFFIXES: .in .def
Makefile: $(srcdir)/Makefile.in $(srcdir)/configure $(srcdir)/version.c \
- $(srcdir)/config/$(xmake_file) $(srcdir)/config/$(tmake_file) \
+ $(xmake_file) $(tmake_file) \
$(LANG_MAKEFILES)
cp config.status config.run
$(SHELL) config.run
# Create a list of the language-independent object files so the language
# subdirectories needn't mention their names explicitly.
-stamp-objlist: Makefile $(OBJS) $(BC_OBJS)
- echo " $(OBJS) $(BC_OBJS)" | sed -e 's, \([a-z]\), ../\1,g' >stamp-objlist
+stamp-objlist: $(OBJS) $(BC_OBJS)
+ echo " $(OBJS) $(BC_OBJS)" | sed -e 's, \([a-z0-9]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
# and CC is `gcc'. It is renamed to `gcc' when it is installed.
-xgcc: gcc.o version.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o xgcc gcc.o version.o $(LIBS)
+xgcc: gcc.o version.o choose-temp.o pexecute.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o version.o \
+ choose-temp.o pexecute.o $(EXTRA_GCC_OBJS) $(LIBS)
# Dump a specs file to make -B./ read these specs over installed ones.
specs: xgcc
# compile libgcc2.a.
# Also create gcc-cross, so that install-common will install properly.
gcc-cross: xgcc
- cp xgcc gcc-cross
+ cp xgcc$(exeext) gcc-cross$(exeext)
cc1: $(P) $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1 $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
cc1obj: $(P) $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1obj $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
# Copy float.h from its source.
gfloat.h: $(FLOAT_H)
+ -rm -f gfloat.h
cp $(FLOAT_H) gfloat.h
# Create float.h source for the native machine.
mv tmp-float.h float.h-nat
# Create a dummy float.h source for a cross-compiler.
+# ??? This isn't used anymore. Should we create config/float-unkn.h
+# and make that the default float_format in configure?
float.h-cross:
- echo "#error float.h values not known for cross-compiler" > t-float.h-cross
+ echo "#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
+ echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
+ echo "#endif" >> t-float.h-cross
mv t-float.h-cross float.h-cross
# Used to compile enquire with standard cc, but have forgotten why.
# Let's try with GCC.
enquire: enquire.o $(GCC_PARTS)
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o enquire
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
-# -if [ "$(srcdir)" != "." ]; then rm -f ./enquire.c; else true; fi
-# -cp $(srcdir)/enquire.c . > /dev/null 2>&1
# Breaking this line caused a problem with one version of GNU make.
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) -I. -c $(srcdir)/enquire.c
libgcc1.null: $(GCC_PASSES)
echo "__foo () {}" > dummy.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
- $(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy.o
- rm -f dummy.o dummy.c
+ $(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy$(objext)
+ rm -f dummy$(objext) dummy.c
# This is $(LIBGCC1) for a cross-compiler.
# We have no automatic way of building libgcc1.a,
# Compile the library of arithmetic subroutines with the native compiler.
# Don't compile it with GCC!
# (That would cause most arithmetic functions to call themselves.)
+#
+# NOTE: If you modify these rules substantially, please be sure to
+# check at least config/i386/t-sco5 and possibly other makefile
+# fragments.
libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
-rm -f tmplibgcc1.a
# Actually build it in tmplibgcc1.a, then rename at end,
for name in $(LIB1FUNCS); \
do \
echo $${name}; \
- rm -f $${name}.o; \
- $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
+ rm -f $${name}$(objext); \
+ $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- mv libgcc1$(oldobjext) $${name}.o; \
- $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}.o; \
- rm -f $${name}.o; \
+ mv libgcc1$(objext) $${name}$(objext); \
+ $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
+ rm -f $${name}$(objext); \
done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
for file in .. $(LIB1FUNCS_EXTRA); \
do \
if [ x$${file} != x.. ]; then \
- name=`echo $${file} | sed -e 's/[.]c$$//' -e 's/[.]asm$$//'`; \
+ name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
echo $${name}; \
if [ $${name}.asm = $${file} ]; then \
cp $${file} $${name}.s || exit 1; file=$${name}.s; \
else true; fi; \
- $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
+ $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}.o; \
+ $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- rm -f $${name}.[so]; \
+ rm -f $${name}.s $${name}$(objext); \
else true; \
fi; \
done
- $(RANLIB) tmplibgcc1.a
+ -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc1.a; else true; fi
mv tmplibgcc1.a libgcc1.a
# Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
echo $${name}; \
$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- mv libgcc1.o $${name}.o; \
- $(AR) $(AR_FLAGS) tmplibgcc1.a $${name}.o; \
- rm -f $${name}.o; \
+ mv libgcc1$(objext) $${name}$(objext); \
+ $(AR) $(AR_FLAGS) tmplibgcc1.a $${name}$(objext); \
+ rm -f $${name}$(objext); \
done
-rm -f libgcc1.S
mv tmplibgcc1.a libgcc1-asm.a
for name in $(LIB1FUNCS); \
do \
echo $${name}; \
- $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
+ $(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
echo '#ifdef ' L$${name} >> libgcc1.S; \
cat libgcc1.s >> libgcc1.S; \
fi
libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(LIB2FUNCS_EXTRA) \
- machmode.h longlong.h gbl-ctors.h config.status
+ $(LANG_LIB2FUNCS) machmode.h longlong.h gbl-ctors.h config.status
# Actually build it in tmplibgcc2.a, then rename at end,
# so that libgcc2.a itself remains nonexistent if compilation is aborted.
-rm -f tmplibgcc2.a
do \
echo $${name}; \
$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
- $(srcdir)/libgcc2.c -o $${name}.o; \
+ $(srcdir)/libgcc2.c -o $${name}$(objext); \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}.o; \
- rm -f $${name}.o; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
+ rm -f $${name}$(objext); \
done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
- for file in .. $(LIB2FUNCS_EXTRA); \
+ for file in .. $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS); \
do \
if [ x$${file} != x.. ]; then \
- name=`echo $${file} | sed -e 's/[.]c$$//' -e 's/[.]asm$$//'`; \
- echo $${name}; \
- if [ $${name}.asm = $${file} ]; then \
- cp $${file} $${name}.s || exit 1; file=$${name}.s; \
- else true; fi; \
- $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}.o; \
- rm -f $${name}.[so]; \
+ name=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
+ oname=` echo $${name} | sed -e 's,.*/,,'`; \
+ if [ $${name}.txt = $${file} ]; then \
+ for f in .. `cat $${file}`; do if [ x$${f} != x.. ]; then \
+ $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" \
+ CFLAGS="$(CFLAGS)" HOST_PREFIX="$(HOST_PREFIX)" \
+ HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $${f}; \
+ if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${f}; \
+ rm -f $${f}; \
+ fi; done; \
+ else \
+ echo $${name}; \
+ if [ $${name}.asm = $${file} ]; then \
+ cp $${file} $${name}.s || exit 1; file=$${name}.s; \
+ else true; fi; \
+ $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
+ if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
+ $(AR) $(AR_FLAGS) tmplibgcc2.a $${oname}$(objext); \
+ rm -f $${name}.s $${oname}$(objext); \
+ fi; \
else true; \
fi; \
done
# message from ar, we make sure all files are writable.
-(cd tmpcopy; chmod +w * > /dev/null 2>&1)
(cd tmpcopy; $(AR) x ../$(LIBGCC2))
- (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *.o)
+ (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *$(objext))
rm -rf tmpcopy
-if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
# Actually build it in tmplibgcc.a, then rename at end,
# Use the genmultilib shell script to generate the information the gcc
# driver program needs to select the library directory based on the
# switches.
-multilib.h: $(srcdir)/genmultilib Makefile
- $(SHELL) $(srcdir)/genmultilib "$(MULTILIB_OPTIONS)" \
- "$(MULTILIB_DIRNAMES)" "$(MULTILIB_MATCHES)" > multilib.h
+multilib.h: stamp-mlib; @true
+stamp-mlib: $(srcdir)/genmultilib Makefile
+ $(SHELL) $(srcdir)/genmultilib \
+ "$(MULTILIB_OPTIONS)" \
+ "$(MULTILIB_DIRNAMES)" \
+ "$(MULTILIB_MATCHES)" \
+ "$(MULTILIB_EXCEPTIONS)" \
+ "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
+ $(srcdir)/move-if-change tmp-mlib.h multilib.h
+ touch stamp-mlib
# Build multiple copies of libgcc.a, one for each target switch.
stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
- $(LIB2FUNCS_EXTRA) machmode.h longlong.h gbl-ctors.h config.status
+ $(LIB2FUNCS_EXTRA) $(LANG_LIB2FUNCS) machmode.h longlong.h gbl-ctors.h \
+ config.status
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
RANLIB="$(RANLIB)" RANLIB_TEST="$(RANLIB_TEST)" \
HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \
+ MULTILIB_CFLAGS="$${flags}" \
LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \
dir="$${dir}" stmp-multilib-sub; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
# Subroutine of stmp-multilib so make -n works.
stmp-multilib-sub:
- rm -f $(dir)/libgcc.a $(LIBGCC2)
+ rm -f $(LIBGCC2)
+ if [ -d $(dir) ]; then \
+ cd $(dir); \
+ rm -f libgcc.a $(EXTRA_MULTILIB_PARTS); \
+ fi
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
else true; \
fi
(cd tmpcopy; $(AR) x ../$(LIBGCC2))
- (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *.o)
+ (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *$(objext))
rm -rf libgcc2.a tmpcopy
if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
if [ -d $(dir) ]; then true; else mkdir $(dir); fi
mv tmplibgcc.a $(dir)/libgcc.a
+ for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
+ $(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
+ AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
+ HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ MULTILIB_CFLAGS="$(MULTILIB_CFLAGS)" T="t" t$${f}; \
+ mv t$${f} $(dir)/$${f}; \
+ fi; done
objc-runtime: libobjc.a
# Build the Objective C runtime library.
-libobjc.a: cc1obj stmp-int-hdrs libgcc2.ready $(USE_COLLECT2) $(EXTRA_PARTS)
+libobjc.a: cc1obj specs stmp-int-hdrs libgcc2.ready $(USE_COLLECT2) $(EXTRA_PARTS)
if [ -d objc ]; then true; else mkdir objc; fi
thisdir1=`pwd`; \
srcdir1=`cd $(srcdir); pwd`; \
$(MAKE) -f $${srcdir1}/objc/Makefile libobjc.a \
srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
- GCC_CFLAGS="$(GCC_CFLAGS)"
+ GCC_CFLAGS="$(GCC_CFLAGS)" OBJC_THREAD_FILE="$(OBJC_THREAD_FILE)"
-rm -f libobjc.a
ln objc/libobjc.a . >/dev/null 2>&1 || cp objc/libobjc.a .
-if $(RANLIB_TEST) ; then $(RANLIB) libobjc.a; else true; fi
# This is used by objc/Makefile if the user runs that directly.
-sublibobjc.a: cc1obj stmp-int-hdrs libgcc2.ready
+sublibobjc.a: cc1obj specs stmp-int-hdrs libgcc2.ready
thisdir1=`pwd`; \
srcdir1=`cd $(srcdir); pwd`; \
cd objc; \
$(MAKE) -f $$srcdir1/objc/Makefile libobjc.a \
srcdir=$$srcdir1 tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
GCC_FOR_TARGET="$$thisdir1/xgcc -B$$thisdir1/" \
- GCC_CFLAGS="$(GCC_CFLAGS)"
+ GCC_CFLAGS="$(GCC_CFLAGS)" OBJC_THREAD_FILE="$(OBJC_THREAD_FILE)"
# Compile two additional files that are linked with every program
-# linked using GCC on system V, for the sake of C++ constructors.
-crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
+# linked using GCC on systems using COFF or ELF, for the sake of C++
+# constructors.
+$(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
+ -finhibit-size-directive -fno-inline-functions $(CRTSTUFF_T_CFLAGS) \
+ -c $(srcdir)/crtstuff.c -DCRT_BEGIN -o $(T)crtbegin$(objext)
+
+$(T)crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \
+ -finhibit-size-directive -fno-inline-functions $(CRTSTUFF_T_CFLAGS) \
+ -c $(srcdir)/crtstuff.c -DCRT_END -o $(T)crtend$(objext)
+
+# On some systems we also want to install versions of these files
+# compiled using PIC for use in shared libraries.
+crtbeginS.o crtendS.o: stamp-crtS ; @true
+
+stamp-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
-DCRT_BEGIN -finhibit-size-directive -fno-inline-functions \
- -g0 -c $(srcdir)/crtstuff.c -o crtbegin.o
-
-crtend.o: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
- $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
+ -g0 -c $(srcdir)/crtstuff.c
+ mv crtstuff$(objext) crtbeginS$(objext)
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS_S) \
-DCRT_END -finhibit-size-directive -fno-inline-functions \
- -g0 -c $(srcdir)/crtstuff.c -o crtend.o
+ -g0 -c $(srcdir)/crtstuff.c -o crtendS$(objext)
+ touch stamp-crtS
+
+# Compile the start modules crt0.o and mcrt0.o that are linked with every program
+crt0.o: stamp-crt0 ; @true
+mcrt0.o: stamp-crt0; @true
+
+stamp-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H)
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
+ -o crt0.o -c $(CRT0_S)
+ $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \
+ -o mcrt0.o -c $(MCRT0_S)
+ touch stamp-crt0
\f
# Compiling object files from source files.
$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c
-$(srcdir)/c-parse.y: $(srcdir)/c-parse.in
+$(srcdir)/c-parse.y: c-parse.in
+ echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
-e "/^ifc$$/d" -e "/^end ifc$$/d" \
- $(srcdir)/c-parse.in >tmp-c-parse.y
+ $(srcdir)/c-parse.in >>tmp-c-parse.y
$(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
-$(srcdir)/c-gperf.h: $(srcdir)/c-parse.gperf
+$(srcdir)/c-gperf.h: c-parse.gperf
gperf -p -j1 -i 1 -g -o -t -G -N is_reserved_word -k1,3,$$ \
$(srcdir)/c-parse.gperf >tmp-gperf.h
$(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
input.h flags.h $(srcdir)/c-gperf.h c-pragma.h
c-aux-info.o : c-aux-info.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h
c-convert.o : c-convert.c $(CONFIG_H) $(TREE_H) flags.h
-c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H) c-pragma.h
+c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H) except.h function.h \
+ defaults.h c-pragma.h
c-iterate.o: c-iterate.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h flags.h
# To make a configuration always use collect2, set USE_COLLECT2 to ld.
ln collect2$(exeext) ld$(exeext) > /dev/null 2>&1 \
|| cp collect2$(exeext) ld$(exeext)
-collect2 : collect2.o cplus-dem.o underscore.o version.o $(LIBDEPS)
+collect2 : collect2.o cplus-dem.o underscore.o version.o \
+ choose-temp.o $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
- -rm -f collect2
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o collect2 collect2.o cplus-dem.o \
- underscore.o version.o $(LIBS)
+ -rm -f collect2$(exeext)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ collect2.o \
+ cplus-dem.o underscore.o version.o choose-temp.o $(LIBS)
collect2.o : collect2.c $(CONFIG_H) gstab.h obstack.h demangle.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DTARGET_MACHINE=\"$(target)\" $(MAYBE_USE_COLLECT2) \
+ -DTARGET_MACHINE=\"$(target_alias)\" $(MAYBE_USE_COLLECT2) \
-c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
cplus-dem.o: cplus-dem.c demangle.h
-underscore.c: $(GCC_PASSES)
+underscore.c: stamp-under ; @true
+
+stamp-under: $(GCC_PASSES)
echo "int xxy_us_dummy;" >tmp-dum.c
$(GCC_FOR_TARGET) -S tmp-dum.c
echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c
fi
$(srcdir)/move-if-change tmp-under.c underscore.c
-rm -f tmp-dum.c tmp-dum.s
+ touch stamp-under
# Objective C language specific files.
$(srcdir)/objc-parse.c : $(srcdir)/objc-parse.y
cd $(srcdir); $(BISON) $(BISONFLAGS) objc-parse.y -o objc-parse.c
$(srcdir)/objc-parse.y: $(srcdir)/c-parse.in
+ echo '/*WARNING: This file is automatically generated!*/' >tmp-objc-prs.y
sed -e "/^ifc$$/,/^end ifc$$/d" \
-e "/^ifobjc$$/d" -e "/^end ifobjc$$/d" \
- $(srcdir)/c-parse.in >tmp-objc-prs.y
+ $(srcdir)/c-parse.in >>tmp-objc-prs.y
$(srcdir)/move-if-change tmp-objc-prs.y $(srcdir)/objc-parse.y
objc-act.o : objc-act.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h c-lex.h \
# Language-independent files.
-gcc.o: gcc.c $(CONFIG_H) multilib.h config.status $(lang_specs_files)
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
+DRIVER_DEFINES = \
-DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \
-DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
-DDEFAULT_TARGET_VERSION=\"$(version)\" \
- -DDEFAULT_TARGET_MACHINE=\"$(target)\" \
- -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\" \
- $(MAYBE_TARGET_DEFAULT) \
+ -DDEFAULT_TARGET_MACHINE=\"$(target_alias)\" \
+ -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\"
+gcc.o: gcc.c $(CONFIG_H) multilib.h config.status $(lang_specs_files)
+ $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
+ $(DRIVER_DEFINES) \
-c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
dumpvers: dumpvers.c
version.o: version.c
obstack.o: obstack.c
+choose-temp.o: choose-temp.c
+pexecute.o: pexecute.c
convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h
toplev.o : toplev.c $(CONFIG_H) $(TREE_H) $(RTL_H) bytecode.h bc-emit.h \
flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
$(lang_options_files)
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- $(MAYBE_TARGET_DEFAULT) $(MAYBE_USE_COLLECT2) \
+ $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(MAYBE_USE_COLLECT2) \
+ -DTARGET_NAME=\"$(target_alias)\" \
-c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
rtl.o : rtl.c $(CONFIG_H) $(RTL_H)
output.h bytecode.h c-pragma.h
function.o : function.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
- recog.h output.h bytecode.h
+ recog.h output.h bytecode.h bc-emit.h
stmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
- insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h loop.h \
- recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h bc-optab.h \
- bc-emit.h
+ insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h except.h \
+ loop.h recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h \
+ bc-optab.h bc-emit.h
+except.o : except.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
+ insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
+ recog.h output.h except.h
expr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h regs.h \
insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h \
typeclass.h bytecode.h bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h \
- bc-emit.h modemap.def
+ bc-emit.h modemap.def hard-reg-set.h
calls.o : calls.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-codes.h \
insn-flags.h
expmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h expr.h recog.h reload.h
dbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h regs.h \
insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h
-sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) gsyms.h flags.h \
- insn-config.h reload.h
+sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h except.h \
+ function.h expr.h output.h hard-reg-set.h regs.h defaults.h real.h \
+ bytecode.h obstack.h xcoffout.h c-pragma.h
dwarfout.o : dwarfout.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf.h flags.h \
insn-config.h reload.h output.h defaults.h
+dwarf2out.o : dwarf2out.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf2.h flags.h \
+ insn-config.h reload.h output.h defaults.h hard-reg-set.h regs.h
xcoffout.o : xcoffout.c $(CONFIG_H) $(TREE_H) $(RTL_H) xcoffout.h flags.h
emit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
function.h regs.h insn-config.h insn-codes.h real.h expr.h bytecode.h \
getpwd.o : getpwd.c $(CONFIG_H)
integrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h integrate.h \
- insn-flags.h insn-config.h insn-codes.h expr.h real.h function.h \
+ insn-flags.h insn-config.h insn-codes.h expr.h real.h regs.h function.h \
bytecode.h
jump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \
global.o : global.c $(CONFIG_H) $(RTL_H) flags.h \
basic-block.h regs.h hard-reg-set.h insn-config.h output.h
-reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h \
+reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h output.h \
reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h
-reload1.o : reload1.c $(CONFIG_H) $(RTL_H) flags.h expr.h \
+reload1.o : reload1.c $(CONFIG_H) $(RTL_H) real.h flags.h expr.h \
reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
basic-block.h recog.h output.h
caller-save.o : caller-save.c $(CONFIG_H) $(RTL_H) flags.h \
- regs.h hard-reg-set.h insn-config.h basic-block.h recog.h reload.h expr.h
+ regs.h hard-reg-set.h insn-codes.h insn-config.h basic-block.h recog.h \
+ reload.h expr.h
reorg.o : reorg.c $(CONFIG_H) $(RTL_H) conditions.h hard-reg-set.h \
basic-block.h regs.h insn-config.h insn-attr.h insn-flags.h recog.h \
flags.h output.h
sched.o : sched.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h hard-reg-set.h \
flags.h insn-config.h insn-attr.h
final.o : final.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h regs.h \
- recog.h conditions.h insn-config.h insn-attr.h real.h output.h \
+ recog.h conditions.h insn-config.h insn-attr.h except.h real.h output.h \
hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h
recog.o : recog.c $(CONFIG_H) $(RTL_H) \
regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
insn-flags.h insn-codes.h real.h
reg-stack.o : reg-stack.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
- regs.h hard-reg-set.h flags.h insn-config.h
+ regs.h hard-reg-set.h flags.h insn-config.h insn-flags.h
-$(out_object_file): $(out_file) $(CONFIG_H) \
+$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \
$(RTL_H) regs.h hard-reg-set.h real.h insn-config.h conditions.h \
insn-flags.h output.h insn-attr.h insn-codes.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o mips-tfile mips-tfile.o version.o $(LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H)
mips-tdump: mips-tdump.o version.o $(LIBDEPS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o mips-tdump mips-tdump.o version.o $(LIBS)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H)
mv tmp-$@ $@
genconfig : genconfig.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genconfig \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genconfig.o $(HOST_RTL) $(HOST_LIBS)
genconfig.o : genconfig.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
genflags : genflags.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genflags \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genflags.o $(HOST_RTL) $(HOST_LIBS)
genflags.o : genflags.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
gencodes : gencodes.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gencodes \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencodes.o $(HOST_RTL) $(HOST_LIBS)
gencodes.o : gencodes.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
genemit : genemit.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genemit \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genemit.o $(HOST_RTL) $(HOST_LIBS)
genemit.o : genemit.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
genopinit : genopinit.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genopinit \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genopinit.o $(HOST_RTL) $(HOST_LIBS)
genopinit.o : genopinit.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
genrecog : genrecog.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genrecog \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genrecog.o $(HOST_RTL) $(HOST_LIBS)
genrecog.o : genrecog.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
genextract : genextract.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genextract \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genextract.o $(HOST_RTL) $(HOST_LIBS)
genextract.o : genextract.c $(RTL_H) $(build_xm_file) insn-config.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
genpeep : genpeep.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genpeep \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genpeep.o $(HOST_RTL) $(HOST_LIBS)
genpeep.o : genpeep.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
genattr : genattr.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genattr \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattr.o $(HOST_RTL) $(HOST_LIBS)
genattr.o : genattr.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genattrtab \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)
genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) insn-config.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
genoutput : genoutput.o $(HOST_RTL) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genoutput \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genoutput.o $(HOST_RTL) $(HOST_LIBS)
genoutput.o : genoutput.c $(RTL_H) $(build_xm_file)
touch $(HOST_PREFIX_1)
\f
# Remake bytecode files.
-# BI_ALL=bi-run.o
-BI_ALL=
-BC_ALL=bc-opname.h bc-opcode.h bc-arity.h
BI_OBJ=bi-parser.o bi-lexer.o bi-reverse.o
-
bc-emit.o : bc-emit.c $(CONFIG_H) $(RTL_H) real.h $(BYTECODE_H) \
- bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
+ bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
bc-optab.o : bc-optab.c $(CONFIG_H) $(REAL_H) $(BYTECODE_H) \
- bc-opcode.h bc-typecd.h bc-typecd.def
-
-
-bytecode: $(BI_ALL) $(BC_ALL)
+ bc-opcode.h bc-typecd.h bc-typecd.def
bi-arity: bi-arity.o $(BI_OBJ) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o bi-arity \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
bi-arity.o $(BI_OBJ) $(HOST_LIBS)
bi-opcode: bi-opcode.o $(BI_OBJ) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o bi-opcode \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
bi-opcode.o $(BI_OBJ) $(HOST_LIBS)
bi-opname: bi-opname.o $(BI_OBJ) $(HOST_LIBDEPS)
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o bi-opname \
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
bi-opname.o $(BI_OBJ) $(HOST_LIBS)
-bi-run.o: $(srcdir)/bi-run.c $(srcdir)/bi-run.h $(srcdir)/bc-typecd.h \
- bc-opname.h bc-arity.h bc-opcode.h
- $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/bi-run.c
$(srcdir)/bi-parser.h: $(srcdir)/bi-parser.c
$(srcdir)/bi-parser.c: $(srcdir)/bi-parser.y
cd $(srcdir); $(BISON) $(BISONFLAGS) -d bi-parser.y -o bi-parser.c
-bi-parser.o: $(srcdir)/bi-parser.c $(srcdir)/bi-defs.h $(build_xm_file)
+
+bi-parser.o: $(srcdir)/bi-parser.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-parser.c
-bi-lexer.o: $(srcdir)/bi-lexer.c $(srcdir)/bi-parser.h $(build_xm_file)
+bi-lexer.o: bi-lexer.c $(srcdir)/bi-parser.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-lexer.c
-bi-arity.o: bi-arity.c $(srcdir)/bi-defs.h $(build_xm_file)
+bi-arity.o: bi-arity.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-arity.c
-bi-opcode.o: bi-opcode.c $(srcdir)/bi-defs.h $(build_xm_file)
+bi-opcode.o: bi-opcode.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-opcode.c
-bi-opname.o: bi-opname.c $(srcdir)/bi-defs.h $(build_xm_file)
+bi-opname.o: bi-opname.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-opname.c
-bi-reverse.o: bi-reverse.c $(srcdir)/bi-defs.h
+bi-reverse.o: bi-reverse.c bi-defs.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-reverse.c
-
bc-arity.h: stamp-bcarity ; @true
stamp-bcarity : $(srcdir)/bytecode.def bi-arity $(srcdir)/move-if-change
./bi-arity < $(srcdir)/bytecode.def >tmp-bc-arity.h
ln $(CCCP)$(exeext) cpp$(exeext) > /dev/null 2>&1 \
|| cp $(CCCP)$(exeext) cpp$(exeext)
cccp: cccp.o cexp.o version.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cccp cccp.o cexp.o version.o $(LIBS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cccp.o cexp.o \
+ version.o $(LIBS)
cexp.o: $(srcdir)/cexp.c $(CONFIG_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
$(srcdir)/cexp.c: $(srcdir)/cexp.y
cd $(srcdir); $(BISON) -o cexp.c cexp.y
+
cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status
# The reason we use $(libdir)/g++-include rather than using libsubdir
# is for compatibility with the current version of libg++.
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
+ -DOLD_GPLUSPLUS_INCLUDE_DIR=\"$(old_gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
cppmain: cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
version.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cppmain \
- cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
- version.o $(LIBS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cppmain.o cpplib.o cpphash.o \
+ cppalloc.o cpperror.o cppexp.o version.o $(LIBS)
+
+cppmain.o: cppmain.c $(CONFIG_H) cpplib.h
-cpplib.o: cpplib.c $(CONFIG_H) pcp.h version.c config.status
+cpplib.o: cpplib.c $(CONFIG_H) cpplib.h cpphash.h config.status
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
+ -DOLD_GPLUSPLUS_INCLUDE_DIR=\"$(old_gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-c `echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
+cpperror.o: cpperror.c $(CONFIG_H) cpplib.h
+
+cppexp.o: cppexp.c $(CONFIG_H) cpplib.h
+
+cpphash.o: cpphash.c cpplib.h cpphash.h
+
+cppalloc.o: cppalloc.c $(CONFIG_H)
+
# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).
proto: config.status protoize unprotoize SYSCALLS.c.X
-protoize: protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) \
- protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS) -o protoize
+protoize: protoize.o getopt.o getopt1.o getpwd.o version.o \
+ pexecute.o choose-temp.o $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
+ protoize.o getopt.o getopt1.o getpwd.o version.o \
+ pexecute.o choose-temp.o $(LIBS)
protoize.o: stamp-proto ; @true
-unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) $(LDFLAGS) \
- unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS) \
- -o unprotoize
+unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o \
+ pexecute.o choose-temp.o $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
+ unprotoize.o getopt.o getopt1.o getpwd.o version.o \
+ pexecute.o choose-temp.o $(LIBS)
unprotoize.o: stamp-proto ; @true
-stamp-proto: $(srcdir)/protoize.c getopt.h $(CONFIG_H)
+stamp-proto: protoize.c getopt.h $(CONFIG_H)
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DSTD_PROTO_DIR=\"$(libsubdir)\" \
-DUNPROTOIZE $(srcdir)/protoize.c
- mv protoize.o unprotoize.o
+ mv protoize$(objext) unprotoize$(objext)
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
$(srcdir)/protoize.c
touch stamp-proto
-getopt.o: $(srcdir)/getopt.c getopt.h
+getopt.o: getopt.c getopt.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c
-getopt1.o: $(srcdir)/getopt1.c getopt.h
+getopt1.o: getopt1.c getopt.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt1.c
# This info describes the target machine, so compile with GCC just built.
-SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) stmp-int-hdrs
+SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
+ stmp-int-hdrs
-rm -f SYSCALLS.c tmp-SYSCALLS.s
cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DSTD_PROTO_DIR=0" tmp-proto.c
@echo Expect zero differences.
diff $(srcdir)/protoize.c tmp-proto.c | cat
- -rm -f tmp-proto.[cso]
+ -rm -f tmp-proto.[cs] tmp-proto$(objext)
\f
# Build the include directory. The stamp files are stmp-* rather than
# stamp-* so that mostlyclean does not force the include directory to
# The sed command gets just the last file name component;
# this is necessary because VPATH could add a dirname.
# Using basename would be simpler, but some systems don't have it.
- objdir=`pwd`; \
- cd $(srcdir); \
- for file in $(USER_H); do \
- realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
- rm -f $$objdir/include/$$realfile; \
- cp ginclude/$$realfile $$objdir/include; \
- chmod a+r $$objdir/include/$$realfile; \
+ for file in .. $(USER_H); do \
+ if [ X$$file != X.. ]; then \
+ realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
+ rm -f include/$$realfile; \
+ cp $$file include; \
+ chmod a+r include/$$realfile; \
+ fi; \
done
rm -f include/limits.h
cp xlimits.h include/limits.h
touch stmp-headers
# Build fixed copies of system files.
-stmp-fixinc: $(srcdir)/$(FIXINCLUDES) gsyslimits.h
+stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
rm -rf include
mkdir include
if [ x$(FIXINCLUDES) != xMakefile.in ]; \
thisdir1=`pwd`; \
srcdir1=`cd $(srcdir); pwd`; \
cd objc; \
- $(MAKE) -f $${srcdir1}/objc/Makefile copy-headers \
- srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
- GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
- GCC_CFLAGS="$(GCC_CFLAGS)" incinstalldir=$${thisdir1}/include
+ if [ -f $${srcdir1}/objc/Makefile ]; then \
+ $(MAKE) -f $${srcdir1}/objc/Makefile copy-headers \
+ srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
+ GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
+ GCC_CFLAGS="$(GCC_CFLAGS)" incinstalldir=$${thisdir1}/include; \
+ fi
touch objc-headers
# Files related to the fixproto script.
mv tmp-deduced.h deduced.h
gen-protos: gen-protos.o scan.o cppalloc.o $(HOST_LIBDEPS)
- ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gen-protos \
+ ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gen-protos.o scan.o cppalloc.o $(HOST_LIBS)
gen-protos.o: gen-protos.c scan.h $(build_xm_file)
mv xsys-protos.hT xsys-protos.h
rm -rf fixtmp.c
-fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o version.o
- $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o fix-header \
- fix-header.o scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o version.o cppexp.o $(HOST_LIBS)
+fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
+ cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o version.o
+ $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
+ scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o version.o \
+ cppexp.o $(HOST_LIBS)
fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
-scan-decls.o: scan-decls.c scan.h $(build_xm_file)
+scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
# stmp-fixproto depends on this, not on fix-header directly.
info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info
$(srcdir)/cpp.info: cpp.texi
- cd $(srcdir); $(MAKEINFO) cpp.texi
+ cd $(srcdir); $(MAKEINFO) $(MAKEINFOFLAGS) cpp.texi
$(srcdir)/gcc.info: gcc.texi extend.texi install.texi invoke.texi \
md.texi rtl.texi tm.texi
- cd $(srcdir); $(MAKEINFO) gcc.texi
+ cd $(srcdir); $(MAKEINFO) $(MAKEINFOFLAGS) gcc.texi
dvi: $(srcdir)/gcc.dvi $(srcdir)/cpp.dvi lang.dvi
# Using unprotoize.c is not quite right in the first place,
# but what better way is there?
-rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
- -rm -f libgcc1.null $(LIB2FUNCS_EXTRA)
+ -rm -f libgcc1.null
-rm -f *.dvi
-rm -f */*.dvi
-if [ -f md.pre-cpp ]; then \
-rm -f objc-parse.output
-rm -f c-parse.output
-rm -f *.asm
+ -rm -f float.h
# Delete anything likely to be found in the source directory
# that shouldn't be in the distribution.
install: $(INSTALL_TARGET) ; @true
# Copy the compiler files into directories where they will be run.
+# Install the driver last so that the window when things are
+# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
- install-man install-info lang.install-normal
+ install-libobjc install-man install-info lang.install-normal install-driver
# Do nothing while making gcc with a cross-compiler. The person who
# makes gcc for the target machine has to know how to put a complete
# Install float.h for cross compiler.
# Run this on the target machine!
-install-float-h-cross: install-dir
+install-float-h-cross: installdirs
# if [ -f enquire ] ; then true; else false; fi
# Note: don't use -. We should fail right away if enquire was not made.
./enquire -f > $(tmpdir)/float.h
-rm -f $(tmpdir)/float.h
chmod a-x $(libsubdir)/include/float.h
-# Create the installation directory.
-install-dir:
+# Create the installation directories.
+installdirs:
+ -if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; chmod a+rx $(prefix) ; fi
+ -if [ -d $(exec_prefix) ] ; then true ; else mkdir $(exec_prefix) ; chmod a+rx $(exec_prefix) ; fi
-if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi
-if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi
# This dir isn't currently searched by cpp.
# -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
- -if [ -d $(libdir)/gcc-lib/$(target) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target) ; chmod a+rx $(libdir)/gcc-lib/$(target) ; fi
- -if [ -d $(libdir)/gcc-lib/$(target)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version) ; chmod a+rx $(libdir)/gcc-lib/$(target)/$(version) ; fi
- -if [ -d $(libdir)/gcc-lib/$(target)/$(version)/include ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version)/include ; chmod a+rx $(libdir)/gcc-lib/$(target)/$(version)/include ; fi
+ -if [ -d $(libdir)/gcc-lib/$(target_alias) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias) ; chmod a+rx $(libdir)/gcc-lib/$(target_alias) ; fi
+ -if [ -d $(libdir)/gcc-lib/$(target_alias)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias)/$(version) ; chmod a+rx $(libdir)/gcc-lib/$(target_alias)/$(version) ; fi
+ -if [ -d $(libdir)/gcc-lib/$(target_alias)/$(version)/include ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target_alias)/$(version)/include ; chmod a+rx $(libdir)/gcc-lib/$(target_alias)/$(version)/include ; fi
-if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
-if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
-if [ -d $(tooldir) ] ; then true ; else mkdir $(tooldir) ; chmod a+rx $(tooldir) ; fi
-if [ -d $(mandir) ] ; then true ; else mkdir $(mandir) ; chmod a+rx $(mandir) ; fi
# Install the compiler executables built during cross compilation.
-install-common: native install-dir xgcc $(EXTRA_PARTS) lang.install-common
+install-common: native installdirs $(EXTRA_PARTS) lang.install-common
for file in $(COMPILERS); do \
if [ -f $$file ] ; then \
rm -f $(libsubdir)/$$file; \
rm -f $(libsubdir)/specs; \
$(INSTALL_DATA) specs $(libsubdir)/specs; \
fi
-# Install the driver program as $(target)-gcc
-# and also as either gcc (if native) or $(tooldir)/bin/gcc.
- -if [ -f gcc-cross$(exeext) ] ; then \
- rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
- $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
- if [ -d $(tooldir)/bin/. ] ; then \
- rm -f $(tooldir)/bin/gcc$(exeext); \
- $(INSTALL_PROGRAM) gcc-cross$(exeext) $(tooldir)/bin/gcc$(exeext); \
- else true; fi; \
- else \
- rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
- $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
- rm -f $(bindir)/$(target)-gcc-1$(exeext); \
- ln $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target)-gcc-1$(exeext) \
- > /dev/null 2>&1 \
- || cp $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target)-gcc-1$(exeext); \
- mv $(bindir)/$(target)-gcc-1$(exeext) $(bindir)/$(target)-gcc$(exeext); \
- fi
# Install protoize if it was compiled.
-if [ -f protoize$(exeext) ]; \
then \
-rm -f $(libsubdir)/cpp$(exeext)
$(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
+# Install the driver program as $(target_alias)-gcc
+# and also as either gcc (if native) or $(tooldir)/bin/gcc.
+install-driver: xgcc
+ -if [ -f gcc-cross$(exeext) ] ; then \
+ rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
+ if [ -d $(tooldir)/bin/. ] ; then \
+ rm -f $(tooldir)/bin/gcc$(exeext); \
+ $(INSTALL_PROGRAM) gcc-cross$(exeext) $(tooldir)/bin/gcc$(exeext); \
+ else true; fi; \
+ else \
+ rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
+ $(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
+ rm -f $(bindir)/$(target_alias)-gcc-1$(exeext); \
+ ln $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-1$(exeext) \
+ > /dev/null 2>&1 \
+ || cp $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target_alias)-gcc-1$(exeext); \
+ mv $(bindir)/$(target_alias)-gcc-1$(exeext) $(bindir)/$(target_alias)-gcc$(exeext); \
+ fi
+
# Install the info files.
-install-info: doc install-dir lang.install-info
+install-info: doc installdirs lang.install-info
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
cd $(srcdir); for f in cpp.info* gcc.info*; \
do $(INSTALL_DATA) $$f $(infodir)/$$f; done
-chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
# Install the man pages.
-install-man: install-dir $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
+install-man: installdirs $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
-if [ -f gcc-cross ] ; then \
rm -f $(mandir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_CROSS_NAME)$(manext); \
-chmod a-x $(mandir)/cccp$(manext)
# Install the library.
-install-libgcc: libgcc.a install-dir
+install-libgcc: libgcc.a installdirs
-if [ -f libgcc.a ] ; then \
rm -f $(libsubdir)/libgcc.a; \
$(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
else true; fi
# Install multiple versions of libgcc.a.
-install-multilib: stmp-multilib install-dir
+install-multilib: stmp-multilib installdirs
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; fi; \
- rm -f $(libsubdir)/$${dir}/libgcc.a; \
- $(INSTALL_DATA) $${dir}/libgcc.a $(libsubdir)/$${dir}/libgcc.a; \
+ for f in libgcc.a $(EXTRA_MULTILIB_PARTS); do \
+ rm -f $(libsubdir)/$${dir}/$${f}; \
+ $(INSTALL_DATA) $${dir}/$${f} $(libsubdir)/$${dir}/$${f}; \
+ done; \
if $(RANLIB_TEST); then \
(cd $(libsubdir)/$${dir}; $(RANLIB) libgcc.a); else true; fi; \
chmod a-x $(libsubdir)/$${dir}/libgcc.a; \
done
# Install the objc run time library.
-install-libobjc: libobjc.a install-dir
+install-libobjc: installdirs
-if [ -f libobjc.a ] ; then \
rm -f $(libsubdir)/libobjc.a; \
$(INSTALL_DATA) libobjc.a $(libsubdir)/libobjc.a; \
else true; fi
# Install all the header files built in the include subdirectory.
-install-headers: install-include-dir $(INSTALL_HEADERS_DIR) install-assert-h
+install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H)
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
-files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
fi
# Create or recreate the gcc private include file directory.
-install-include-dir: install-dir
+install-include-dir: installdirs
-rm -rf $(libsubdir)/include
mkdir $(libsubdir)/include
-chmod a+rx $(libsubdir)/include
## Don't replace the assert.h already there if it is not from GCC.
## This code would be simpler if it tested for -f ... && ! grep ...
## but supposedly the ! operator is missing in sh on some systems.
-install-assert-h: assert.h install-dir
+install-assert-h: assert.h installdirs
if [ -f $(assertdir)/assert.h ]; \
then \
if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
fi
# Use this target to install the program `collect2' under the name `ld'.
-install-collect2: collect2 install-dir
+install-collect2: collect2 installdirs
$(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/ld$(exeext)
# Install the driver program as $(libsubdir)/gcc for collect2.
$(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)
# This target exists to do the initial work before the language specific
# stuff gets done.
-distdir-start: doc $(srcdir)/INSTALL c-parse.y $(srcdir)/c-gperf.h objc-parse.y \
- c-parse.c objc-parse.c cexp.c
+distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
+ $(srcdir)/objc-parse.y $(srcdir)/c-parse.c $(srcdir)/objc-parse.c \
+ $(srcdir)/cexp.c
@if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
then true; \
else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
$(LANG_DIFF_EXCLUDES) \
gcc-$(oldversion) gcc-$(version) > diffs
-# do make -f ../gcc/Makefile maketest DIR=../gcc
-# in the intended test directory to make it a suitable test directory.
-# THIS IS OBSOLETE; use the -srcdir operand in configure instead.
-maketest:
- ln -s $(DIR)/*.[chy] .
- ln -s $(DIR)/configure .
- ln -s $(DIR)/*.def .
- -rm -f =*
- ln -s $(DIR)/.gdbinit .
- ln -s $(DIR)/$(FIXINCLUDES) .
- -ln -s $(DIR)/bison.simple .
- ln -s $(DIR)/config .
- ln -s $(DIR)/move-if-change .
-# The then and else were swapped to avoid a problem on Ultrix.
- if [ ! -f Makefile ] ; then ln -s $(DIR)/Makefile .; else false; fi
- -rm tm.h aux-output.c config.h md
- make clean
-# You must then run config to set up for compilation.
-
bootstrap: force
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
- $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES=c
+ $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)"
$(MAKE) stage1
# This used to define ALLOCA as empty, but that would lead to bad results
# for a subsequent `make install' since that would not have ALLOCA empty.
# ./ avoids bug in some versions of tail.
compare: force
- for file in *.o; do \
+ for file in *$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
- && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \
+ && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done
for dir in tmp-foo $(SUBDIRS); do \
- if [ "`echo $$dir/*.o`" != "$$dir/*.o" ] ; then \
- for file in $$dir/*.o; do \
+ if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
+ for file in $$dir/*$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
- && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \
+ && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done; \
fi; \
done
# Similar, but compare with stage3 directory
compare3: force
- for file in *.o; do \
+ for file in *$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
- && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \
+ && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done
for dir in tmp-foo $(SUBDIRS); do \
- if [ "`echo $$dir/*.o`" != "$$dir/*.o" ] ; then \
- for file in $$dir/*.o; do \
+ if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
+ for file in $$dir/*$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
- && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \
+ && (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done; \
fi; \
done
# running tail and the overhead of twice copying each object file.
gnucompare: force
- for file in *.o; do \
+ for file in *$(objext); do \
cmp --ignore-initial=16 $$file stage2/$$file || true ; \
done
for dir in tmp-foo $(SUBDIRS); do \
- if [ "`echo $$dir/*.o`" != "$$dir/*.o" ] ; then \
- for file in $$dir/*.o; do \
+ if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
+ for file in $$dir/*$(objext); do \
cmp --ignore-initial=16 $$file stage2/$$file || true ; \
done; \
fi; \
# Similar, but compare with stage3 directory
gnucompare3: force
- for file in *.o; do \
+ for file in *$(objext); do \
cmp --ignore-initial=16 $$file stage3/$$file || true ; \
done
for dir in tmp-foo $(SUBDIRS); do \
- if [ "`echo $$dir/*.o`" != "$$dir/*.o" ] ; then \
- for file in $$dir/*.o; do \
+ if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
+ for file in $$dir/*$(objext); do \
cmp --ignore-initial=16 $$file stage3/$$file || true ; \
done; \
fi; \
-mv $(STAGESTUFF) stage1
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
- -if [ -f as ] ; then cp as stage1 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage1 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage1 ; else true ; fi
+ -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage1 || cp as$(exeext) stage1 ; else true ; fi
+ -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage1 || cp ld$(exeext) stage1 ; else true ; fi
+ -if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage1 || cp collect-ld$(exeext) stage1 ; else true ; fi
-rm -f stage1/libgcc.a
-cp libgcc.a stage1
-if $(RANLIB_TEST) ; then $(RANLIB) stage1/libgcc.a; else true; fi
+ -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
+ cp stage1/$${f} . ; \
+ fi; done
stage1: force stage1-start lang.stage1
stage2-start:
-mv $(STAGESTUFF) stage2
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
- -if [ -f as ] ; then cp as stage2 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage2 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage2 ; else true ; fi
+ -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage2 || cp as$(exeext) stage2 ; else true ; fi
+ -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage2 || cp ld$(exeext) stage2 ; else true ; fi
+ -if [ -f collect-ld ] ; then ln -s ../collect-ld$(exeext) stage2 || cp collect-ld$(exeext) stage2 ; else true ; fi
-rm -f stage2/libgcc.a
-cp libgcc.a stage2
-if $(RANLIB_TEST) ; then $(RANLIB) stage2/libgcc.a; else true; fi
+ -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
+ cp stage2/$${f} . ; \
+ fi; done
stage2: force stage2-start lang.stage2
stage3-start:
-mv $(STAGESTUFF) stage3
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
- -if [ -f as ] ; then cp as stage3 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage3 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage3 ; else true ; fi
+ -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage3 || cp as$(exeext) stage3 ; else true ; fi
+ -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage3 || cp ld$(exeext) stage3 ; else true ; fi
+ -if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage3 || cp collect-ld$(exeext) stage3 ; else true ; fi
-rm -f stage3/libgcc.a
-cp libgcc.a stage3
-if $(RANLIB_TEST) ; then $(RANLIB) stage3/libgcc.a; else true; fi
+ -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
+ cp stage3/$${f} . ; \
+ fi; done
stage3: force stage3-start lang.stage3
stage4-start:
-mv $(STAGESTUFF) stage4
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
- -if [ -f as ] ; then cp as stage4 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage4 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage4 ; else true ; fi
+ -if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage4 || cp as$(exeext) stage4 ; else true ; fi
+ -if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage4 || cp ld$(exeext) stage4 ; else true ; fi
+ -if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage4 || cp collect-ld$(exeext) stage4 ; else true ; fi
-rm -f stage4/libgcc.a
-cp libgcc.a stage4
-if $(RANLIB_TEST) ; then $(RANLIB) stage4/libgcc.a; else true; fi
+ -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \
+ cp stage4/$${f} . ; \
+ fi; done
stage4: force stage4-start lang.stage4
# Copy just the executable files from a particular stage into a subdirectory,
# and delete the object files. Use this if you're just verifying a version
# that is pretty sure to work, and you are short of disk space.
-risky-stage1: force
- -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
- -mv $(GCC_PARTS) stage1
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as ] ; then cp as stage1 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage1 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage1 ; else true ; fi
- -rm -f stage1/libgcc.a
- -cp libgcc.a stage1 && $(RANLIB) stage1/libgcc.a
- -make clean
+risky-stage1: stage1
+ - make clean
-risky-stage2: force
- -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
- -mv $(GCC_PARTS) stage2
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as ] ; then cp as stage2 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage2 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage2 ; else true ; fi
- -rm -f stage2/libgcc.a
- -cp libgcc.a stage2 && $(RANLIB) stage2/libgcc.a
+risky-stage2: stage2
-make clean
-risky-stage3: force
- -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
- -mv $(GCC_PARTS) stage3
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as ] ; then cp as stage3 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage3 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage3 ; else true ; fi
- -rm -f stage3/libgcc.a
- -cp libgcc.a stage3 && $(RANLIB) stage3/libgcc.a
+risky-stage3: stage3
-make clean
-risky-stage4: force
- -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
- -mv $(GCC_PARTS) stage4
-# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
-# dir will work properly.
- -if [ -f as ] ; then cp as stage4 ; else true ; fi
- -if [ -f ld ] ; then cp ld stage4 ; else true ; fi
- -if [ -f real-ld ] ; then cp real-ld stage4 ; else true ; fi
- -rm -f stage4/libgcc.a
- -cp libgcc.a stage4 && $(RANLIB) stage4/libgcc.a
+risky-stage4: stage4
-make clean
#In GNU Make, ignore whether `stage*' exists.
OSDN Git Service
