+2005-05-29 Kazu Hirata <kazu@cs.umass.edu>
+
+ * cgraphunit.c, ipa-inline.c, loop-iv.c, modulo-sched.c,
+ opts.c, postreload-gcse.c, tree-browser.def, tree-eh.c,
+ tree-ssa-copyrename.c, tree-vect-analyze.c: Fix typos and
+ follow spelling conventions in error/dump messages.
+
+2005-05-29 Roger Sayle <roger@eyesopen.com>
+ Richard Henderson <rth@redhat.com>
+
+ * ifcvt.c (noce_emit_move_insn): Construct a SET pattern directly
+ if the RHS isn't suitable for calling emit_move_insn.
+
+2005-05-29 Kazu Hirata <kazu@cs.umass.edu>
+
+ * tree-ssa-ccp.c (ccp_fold): Return immediately after calling
+ fold_unary and fold_binary.
+
+2005-05-29 Roger Sayle <roger@eyesopen.com>
+
+ * reg-stack.c (propagate_stack): Always copy the source stack to
+ the destination. This routine is now only called when this is safe.
+ (better_edge): New function split out from convert_regs_1 to
+ determine which of two edges is better to propagate across.
+ (convert_regs_1): We need only search for a best edge if the
+ stack layout hasn't been defined yet. Use better_edge to help
+ find beste. No longer traverse unnecessary edges.
+
+2005-05-29 Keith Besaw <kbesaw@us.ibm.com>
+
+ * tree-ssa-alias.c (new_type_alias): New procedure to
+ create a type memory tag for a pointer with a may-alias
+ set determined from a variable declaration.
+ * tree-flow.h: export declaration of new_type_alias
+ * tree-optimize.c (init_tree_optimization_passes): document
+ that pass_may_alias cannot be called after pass_vectorize.
+ * tree-vect-transform (vect_create_data_ref_ptr): Call
+ new_type_alias when an type memory tag isn't available
+ for a reference.
+ (vectorizable_store): Use copy_virtual_operands to update
+ virtual defs in place (so that loop_version can be called).
+ Call mark_for_renaming for the virtual defs in case peeling
+ is done and virtual uses outside the loop need to be updated.
+
+2005-05-29 Dorit Naishlos <dorit@il.ibm.com>
+
+ PR tree-optimization/21639
+ * tree-complex.c (pass_lower_vector_s): Remove TODO_ggc_collect.
+
+2005-05-29 Jan Hubicka <jh@suse.cz>
+
+ PR tree-optimization/21562
+ * cfgexpand.c (construct_init_block): Deal properly with the case
+ of entry edge not pointing to very first basic block.
+
+2005-05-28 Kazu Hirata <kazu@cs.umass.edu>
+
+ * tree-ssa-ccp.c (ccp_fold): Remove code that produces
+ non-gimple min invariant.
+
+ * Makefile.in (OBJS-common): Add tree-cfgcleanup.o.
+ * tree-flow.h: Add prototypes for start_recording_case_labels
+ and end_recording_case_labels.
+ * tree-cfg.c (start_recording_case_labels,
+ end_recording_case_labels): Export.
+ (cleanup_tree_cfg_loop, modified_noreturn_calls,
+ cleanup_control_flow, cleanup_control_expr_graph,
+ remove_fallthru_edge, phi_alternatives_equal,
+ tree_forwarder_block_p, has_abnormal_incoming_edge_p,
+ remove_forwarder_block, cleanup_forwarder_blocks,
+ remove_forwarder_block_with_phi, merge_phi_nodes,
+ gate_merge_phi, pass_merge_phi): Move to ...
+ * tree-cfgcleanup.c: ... here.
+
+ * basic-block.h: Remove forward declaration of bb_ann_d.
+
+2005-05-28 Jan Hubicka <jh@suse.cz>
+
+ * tree-ssa-threadupdate.c: (create_edge_and_update_destination_phis):
+ Update profile.
+ * value-prof.c (tree_divmod_fixed_value_transform): Be more verbose in
+ debug output.
+ (tree_mod_subtract): Fix profile updating code.
+ (tree_divmod_values_to_profile): Do not produce useless value profilers
+ for divisions.
+
+2005-05-28 Kazu Hirata <kazu@cs.umass.edu>
+
+ * tree-ssa-dom.c (vrp_element_p): Define.
+ (vrp_hash_elt): Change the type of records to
+ VEC(vrp_element_p,heap).
+ (vrp_free): New.
+ (tree_ssa_dominator_optimize): Pass vrp_free to htab_create.
+ Update uses of VRP records.
+ (simplify_cond_and_lookup_avail_expr, record_range): Update
+ uses of VRP records.
+
+ * tree-inline.c (cfun_stack): Change the type to
+ VEC(function_p,heap).
+ (push_cfun, pop_cfun): Use VEC instead of VARRAY.
+
+2005-05-27 Ian Lance Taylor <ian@airs.com>
+
+ * c-decl.c (add_stmt): Add C frontend specific version.
+ (stmts_are_full_exprs_p): Remove.
+ * c-common.h (STMT_IS_FULL_EXPR_P): Remove.
+ (stmts_are_full_exprs_p): Don't declare.
+ * c-semantics.c (add_stmt): Remove.
+
+2005-05-27 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * config/mips/mips-protos.h (mips_declare_object): Add printf
+ attribute.
+ * config/mips/mips.c (mips_declare_object_name): Fix format
+ argument.
+
+2005-05-27 Roger Sayle <roger@eyesopen.com>
+
+ * reg-stack.c (compensate_edge): Remove original prototype.
+ (propagate_stack): New function to copy the stack layout
+ at the start of a basic block from the layout at the end of
+ one of its predecessors.
+ (compensate_edge): Assume that both source and destination
+ blocks have already had their stack layouts defined.
+ (compensate_edges): Traverse all non-entry edges in the CFG
+ and call compensate_edge on each in turn.
+ (convert_regs_1): Change return type to void. Call
+ propagate_stack instead of compensate_edge.
+ (convert_regs_2): Change return type to void. Update call
+ to convert_regs_1 to ignore the (now void) return value.
+ (convert_regs): Update calls to convert_regs_2 to ignore
+ the (now void) return value. After all the basic blocks have
+ been processed, call compensate_edges to actually emit new
+ insns.
+ (reg_to_stack): Initialize the aux info for each basic block
+ with FOR_EACH_BB instead of which FOR_EACH_BB_REVERSE.
+
+2005-05-28 Jan Hubicka <jh@suse.cz>
+
+ * except.c (can_throw_internal_1, can_throw_external_1): Add
+ "is_resx" argument.
+ (can_throw_external, can_throw_internal): Bring into sync wrt
+ dealing resx.
+ * except.h (can_throw_internal_1, can_throw_external_1): Update
+ prototype.
+ * tree-eh.c (tree_can_throw_internal, tree_can_throw_external):
+ Deal properly with resx.
+
+2005-05-27 Kazu Hirata <kazu@cs.umass.edu>
+
+ * basic-block.h (basic_block_def): Add phi_nodes and
+ predictions. Remove tree_annotations.
+ * predict.c (tree_predicted_by_p, tree_predict_edge,
+ combine_predictions_for_bb): Adjust references to predictions.
+ * tree-cfg.c (init_empty_tree_cfg, create_bb): Don't call
+ create_block_annotation.
+ (create_block_annotation, free_blocks_annotatios,
+ clear_blocks_annotations): Remove.
+ (dump_cfg_stats): Don't print out the memory spent on
+ bb_ann_d.
+ (delete_tree_cfg_annotations): Don't call free_blocks_annotations.
+ * tree-flow-inline.h (bb_ann): Remove.
+ (phi_nodes, set_phi_nodes): Update references to phi_nodes.
+ * tree-flow.h (bb_ann_d): Remove.
+ * tree-if-conv.c (process_phi_nodes): Update a reference to
+ phi_nodes.
+ * tree-phinodes.c (reserve_phi_args_for_new_edge,
+ create_phi_node, remove_phi_node): Likewise.
+ * tree-pretty-print.c (dump_generic_bb_buff): Don't call bb_ann.
+ * tree-ssa-dom.c (threaded_blocks): New.
+ (tree_ssa_dominator_optimize): Initialize, clear, and free
+ threaded_blocks. Update a call to thread_through_all_blocks.
+ (thread_across_edge): Use threaded_blocks instead of setting
+ incoming_edge_threaded.
+ * tree-ssa-threadupdate.c (threaded_through_all_blocks): Take
+ a bitmap of blocks that are threaded through.
+ * tree.h: Move the prototype of threaded_through_blocks to
+ tree-flow.h.
+
+ * domwalk.c (walk_dominator_tree, init_walk_dominator_tree,
+ fini_walk_dominator_tree): Use VEC instead of VARRAY.
+ * domwalk.h (dom_walk_data): Change the type of
+ block_data_stack and free_block_data to VEC(void_p,heap)*.
+ * tree-ssa-dse.c (dse_initialize_block_local_data,
+ dse_optimize_stmt, dse_record_phis, dse_finalize_block): Use
+ VEC instead of VARRAY.
+
+2005-05-27 Jan Hubicka <jh@suse.cz>
+
+ * cgraph.c: Include tree-gimple.h
+ (cgraph_edge): Rename expr to stmt.
+ (cgraph_create_edge): Likewise.
+ (cgraph_clone_node): Likewise.
+ * cgraph.h (cgraph_node): Use call_stmt instead of call_expr.
+ * cgraphunit.c (record_call_1): Rename to ...
+ (record_reference): ... this one; do not build edges.
+ (cgraph_varpool_analyze_pending_decls): Call record_reference directly.
+ (current_basic_block): Kill.
+ (cgraph_create_edges): Rewrite to work on gimple statements nicely.
+ (verify_cgraph_node): Likewise.
+ * tree-inline.c (copy_body_r): Do not mess up with cgraph edges.
+ (copy_bb): Mess up with cgraph edges here; simplify EH handling.
+ (copy_edges_for_bb): Simplify EH handling.
+ (expand_call_inline): Pass statement to cgraph_edge and
+ cgraph_create_edge.
+
+2005-05-27 Richard Guenther <rguenth@gcc.gnu.org>
+
+ * tree-inline.c (copy_body_r): Manually fold *& to deal
+ with ADDR_EXPRs with mismatched types for now.
+
+ * gimplify.c (fold_indirect_ref_rhs): New function.
+ (gimplify_modify_expr_rhs): Use it instead of pessimistic
+ fold_indirect_ref.
+
+ * fold-const.c (fold_indirect_ref_1): Add type argument;
+ make sure the resulting expression is of this type.
+ (build_fold_indirect_ref, fold_indirect_ref): Adjust callers.
+
+2005-05-27 Kazu Hirata <kazu@cs.umass.edu>
+
+ PR tree-optimization/21658
+ * tree-ssa-ccp.c (ccp_fold): Call fold_binary instead of
+ fold_binary_to_constant. Likewise, call fold_unary instead of
+ fold_unary_to_constant.
+
+2005-05-27 Nathan Sidwell <nathan@codesourcery.com>
+
+ * vec.h: Implement integral type vector specialization.
+ (VEC_T): Define a non-GTY structure.
+ (VEC_T_GTY): Define a GTY structure.
+ (VEC_TA): Rename to ...
+ (VEC_TA_GTY): ... here.
+ (DEF_VEC_I, DEF_VEC_ALLOC_I): New.
+ (DEF_VEC_P, DEF_VEC_ALLOC_P): Adjust.
+ (DEF_VEC_FUNC_P, DEF_VEC_ALLOC_FUNC_P): New, broken out of
+ DEF_VEC_P and DEF_VEC_ALLOC_P.
+ (DEF_VEC_O, DEF_VEC_ALLOC_O): Adjust.
+ (DEF_VEC_FUNC_O, DEF_VEC_ALLOC_FUNC_O): New, broken out of
+ DEF_VEC_O and DEF_VEC_ALLOC_O.
+ * global.c: Use DEF_VEC_I, DEF_VEC_ALLOC_I.
+ * lambda-code.c: Likewise.
+ * tree-into-ssa.c: Likewise.
+ * tree-ssa-live.c: Likewise.
+
+2005-05-27 Kazu Hirata <kazu@cs.umass.edu>
+
+ * tree-into-ssa.c (update_ssa): Ensure that the operand cache
+ is up-to-date.
+ * tree-ssa-dom.c (tree_ssa_dominator_optimize): Call
+ update_stmt_if_modified before calling update_ssa.
+
+2005-05-27 Ralf Corsepius <ralf.corsepius@rtems.org>
+
+ * config/rs6000/t-rtems: Remove roe multilib variant.
+
+2005-05-26 Roger Sayle <roger@eyesopen.com>
+
+ PR tree-optimization/9814
+ * ifcvt.c (noce_emit_move_insn): If we fail to recognize the move
+ instruction, add the necessary clobbers by re-expanding the RTL
+ for arithmetic operations via optab.c's expand_unop/expand_binop.
+ (noce_try_bitop): New function to optimize bit manipulation idioms
+ of the form "if (x & C) x = x op C" and "if (!(x & C) x = x op C".
+ (noce_process_if_block): Call noce_try_bitop.
+
+2005-05-26 Roger Sayle <roger@eyesopen.com>
+
+ * reg-stack.c (convert_regs_entry, convert_regs_exit,
+ convert_regs_1, convert_regs_2, convert_regs): Delete prototypes.
+ (reg_to_stack): Move to end of the file. Initialize the per
+ basic block information here, instead of...
+ (convert_regs_entry): Here.
+ (convert_regs): Change unused return type to void.
+
+2005-05-27 Kazu Hirata <kazu@cs.umass.edu>
+
+ * c-pch.c, timevar.c, timevar.h, unwind-compat.c,
+ unwind-dw2-fde-compat.c, unwind-dw2-fde.c, config/mmix/mmix.h,
+ config/rs6000/eabispe.h, config/rs6000/lynx.h,
+ config/sh/elf.h, config/sh/symbian-pre.h,
+ config/sparc/sparc-protos.h: Update copyright.
+
+2005-05-26 Mike Stump <mrs@apple.com>
+
+ * darwin.h (ASM_OUTPUT_LABELREF): Handle quoted non-lazy pointers
+ for Objective-C++.
+
+2005-05-26 Richard Guenther <rguenth@gcc.gnu.org>
+
+ * tree-ssa-forwprop.c (forward_propagate_addr_expr):
+ See through ADDR_EXPR in finding place to propagate into.
+
+2005-05-26 Kazu Hirata <kazu@cs.umass.edu>
+
+ * c-common.c, c-parser.c, cfgbuild.c, cfghooks.c, cfghooks.h,
+ cfgrtl.c, cgraphunit.c, ddg.c, expr.h, gcse.c, ggc-page.c,
+ ggc-zone.c, gimplify.c, ipa-inline.c, longlong.h, targhooks.c,
+ tree-flow-inline.h, tree-pass.h, tree-ssa-dse.c,
+ tree-ssa-loop-im.c, tree-ssa-loop-ivopts.c,
+ tree-ssa-operands.c, tree-vect-analyze.c,
+ tree-vect-transform.c, tree-vectorizer.c, tree.c,
+ config/arm/arm.c, config/bfin/bfin.c, config/frv/frv.c,
+ config/frv/frv.md, config/i386/i386.c, config/i386/sse.md,
+ config/m68hc11/m68hc11.c, config/m68hc11/m68hc11.h,
+ config/mcore/mcore.c, config/mips/mips.c, config/mips/mips.md,
+ config/rs6000/darwin-ldouble.c, config/rs6000/rs6000.c,
+ config/rs6000/rs6000.h, config/sh/sh.c, config/sh/sh.md,
+ config/sh/ushmedia.h, config/sparc/sparc.c,
+ config/sparc/sparc.md, config/stormy16/stormy-abi: Fix comment
+ typos. Follow spelling conventions.
+ * doc/invoke.texi, doc/tm.texi, doc/tree-ssa.texi: Fix typos.
+ Follow spelling conventions.
+
+2005-05-26 David Ung <davidu@mips.com>
+
+ * config/mips/mips.c (mips_use_ins_ext_p): New helper function
+ that determines whether the MIPS32/64 R2 ext/ins should be used.
+ * config/mips/mips.h (ISA_HAS_EXT_INS): New macro.
+ * config/mips/mips.md (extzv): Changed predicate for operand to
+ nonimmediate_operand. Add code to generate insn patterns for
+ extzvsi and extzvdi.
+ (extzv<mode>): New pattern to match mips32/64 r2 ext insn.
+ (insv): Similarly for insertion.
+ (insv<mode>): Similarly.
+
+2005-05-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * simplify-rtx.c (avoid_constant_pool_reference): Support
+ offsetted addresses in the constant pool.
+
+2005-05-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * df.h (DF_SUBREGS, df_local_def_available_p, df_insn_modified_p): New.
+ * df.c (DF_SUBREGS, df_local_def_available_p, df_insn_modified_p): New.
+
+2005-05-26 Jakub Jelinek <jakub@redhat.com>
+
+ PR target/21716
+ * reg-stack.c (swap_rtx_condition): Don't crash if %ax user was not
+ found in the basic block and last insn in the basic block is not
+ INSN_P. Remove explicit unspec numbers that are no longer valid
+ from comments.
+
+2005-05-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * tree-vect-transform.c (vectorizable_operation): Try word_mode
+ vectorization if UNITS_PER_WORD == UNITS_PER_SIMD_WORD, even
+ if a vector mode is available.
+
+2005-05-25 Roger Sayle <roger@eyesopen.com>
+
+ PR middle-end/21709
+ * fold-const.c (const_binop): Check for division by zero during
+ complex division.
+
+2005-05-26 Ian Lance Taylor <ian@airs.com>
+
+ * reload1.c (verify_initial_elim_offsets): Add braces to avoid
+ having a declaration after a statement.
+
+2005-05-26 Richard Sandiford <rsandifo@redhat.com>
+
+ * opt-functions.awk (var_type): New function.
+ (var_set): Use CLVC_STRING if var_type returns "const char *".
+ * opth-gen.awk: Use var_type to find out the types of variables.
+ Don't print comments above each "extern" definition.
+ * optc-gen.awk: Use var_type in the same way.
+ * opts.h (cl_var_cond): Rename to...
+ (cl_var_type): ...this. Add CLVC_STRING.
+ (cl_option): Make "flag_var" a "void *" pointer. Replace "var_cond"
+ with "var_type".
+ * opts.c (handle_option, option_enabled): Update after above name
+ change. Cast flag_var before using it. Handle CLVC_STRING.
+
+ * config/alpha/alpha.h (alpha_tls_size): Delete.
+ * config/alpha/alpha.c (alpha_tls_size, alpha_cpu_string)
+ (alpha_tune_string, alpha_tp_string, alpha_fprm_string)
+ (alpha_fptm_string, alpha_mlat_string): Delete.
+ (alpha_handle_option): Don't set the above variables here. Use the
+ integer argument to check the validity of -mtls-size=.
+ * config/alpha/alpha.opt (mcpu=, mtune=, mfp-rounding-mode=)
+ (mfp-trap-mode=, mtrap-precision=, mmemory-latency=): Add Var()s.
+ (mtls-size=): Likewise. Convert to a UInteger and initialize the
+ variable to 32.
+
+ * config/arc/arc.c (arc_cpu_string, arc_text_string)
+ (arc_data_string, arc_rodata_string): Delete.
+ (arc_handle_option): Don't set the above variables here.
+ * config/arc/arc.opt (mcpu=, mtext=, mdata=, mrodata=): Add Var()s
+ and initialize them.
+
+ * config/arm/arm.c (target_fpu_name, target_fpe_name)
+ (target_float_abi_name, target_abi_name, structure_size_string)
+ (arm_pic_register_string): Delete.
+ (arm_handle_option): Don't set the above variables here, except
+ in the handling of -mhard-float and -msoft-float.
+ * config/arm/arm.opt (mabi=, mfloat-abi=, mfp=, mfpe=, mfpu=)
+ (mpic-register=, mstructure-size-boundary=): Add Var()s.
+
+ * config/avr/avr.c (avr_init_stack, avr_mcu_name, TARGET_HANDLE_OPTION)
+ (avr_handle_option): Delete.
+ * config/avr/avr.opt (mmcu=, minit-stack=): Add Var()s and initialize
+ them.
+
+ * config/bfin/bfin.c (bfin_library_id): Delete.
+ (bfin_handle_option): Don't set it.
+ * config/bfin/bfin.opt (mshared-library-id=): Add Var().
+
+ * config/c4x/c4x.h (c4x_rpts_cycles): Delete.
+ * config/c4x/c4x.c (c4x_rpts_cycles): Delete.
+ (c4x_handle_option): Don't set c4x_rpts_cycles here.
+ * config/c4x/c4x.opt (mrpts=): Add Var().
+
+ * config/cris/aout.h (CRIS_SUBTARGET_HANDLE_OPTION): Don't set
+ cris_elinux_stacksize_str here.
+ * config/cris/aout.opt (melinux-stacksize=): Add Var().
+ * config/cris/cris.h (cris_max_stackframe_str, cris_cpu_str)
+ (cris_tune_str, cris_elinux_stacksize_str): Delete.
+ * config/cris/cris.c (cris_max_stackframe_str, cris_cpu_str)
+ (cris_tune_str, cris_elinux_stacksize_str): Delete.
+ (cris_handle_option): Don't set the above variables here.
+ * config/cris/cris.opt (mcpu=, march=, mtune=, mmax-stackframe=)
+ (max-stackframe=): Add Var()s.
+
+ * config/i386/i386.h (ix86_tune_string, ix86_arch_string): Delete.
+ * config/i386/i386.c (ix86_cmodel_string, ix86_asm_string)
+ (ix86_tls_dialect_string, ix86_tune_string, ix86_arch_string)
+ (ix86_fpmath_string, ix86_regparm_string, ix86_align_loops_string)
+ (ix86_align_jumps_string, ix86_preferred_stack_boundary_string)
+ (ix86_branch_cost_string, ix86_align_funcs_string): Delete.
+ (ix86_handle_option): Don't set the above variables here.
+ * config/i386/i386.opt (malign-functions=, malign-jumps=)
+ (malign-loops=, march=, masm=, mbranch-cost=, mcmodel=, mfpmath=)
+ (mpreferred-stack-boundary=, mregparm=, mtls-dialect=, mtune=): Add
+ Var()s.
+
+ * config/ia64/ia64.h (ia64_tls_size): Delete.
+ * config/ia64/ia64.c (ia64_tls_size): Delete.
+ (ia64_handle_option): Treat -mtls-size= as a UInteger option,
+ reading the integer argument from the "value" parameter. Don't
+ set ia64_tls_size here.
+ * config/ia64/ia64.opt (mtls-size=): Turn into a UInteger option.
+ Add Var() and Init().
+
+ * config/m32r/m32r.h (m32r_cache_flush_func): Delete.
+ (m32r_cache_flush_trap): Delete.
+ * config/m32r/m32r.c (m32r_cache_flush_func): Delete.
+ (m32r_cache_flush_trap): Delete.
+ (m32r_handle_option): Don't set the above variables when handling
+ -mflush-func= and -mflush-trap=.
+ * config/m32r/m32r.opt (-mflush-func=, -mflush-trap=): Add Var()s
+ and Init()s.
+
+ * config/mips/mips.h (mips_cache_flush_func): Delete.
+ * config/mips/mips.c (mips_arch_string, mips_tune_string)
+ (mips_cache_flush_func): Delete.
+ (mips_handle_option): Don't set the above variables when handling
+ -march=, -mtune= and -mflush-func=.
+ * config/mips/mips.opt (march=, mflush-func=, mtune=): Add Var()s.
+
+ * config/s390/s390.c (s390_arch_string): Delete.
+ (s390_handle_option): Don't set it here.
+ * config/s390/s390.opt (march=): Add Var().
+
+ * config/sparc/sparc.h (sparc_cmodel_string): Delete.
+ * config/sparc/sparc.c (sparc_cmodel_string): Delete.
+ (sparc_handle_option): Don't set it here.
+ * config/sparc/sparc.opt (mcmodel=): Add Var().
+
+2005-05-25 Roger Sayle <roger@eyesopen.com>
+
+ * convert.c (convert_to_integer) <POINTER_TYPE>: Avoid recursive
+ call to convert_to_integer by building the NOP_EXPR directly.
+
+2005-05-25 Richard Sandiford <rsandifo@redhat.com>
+
+ * config/rs6000/rs6000.opt (mprioritize-restricted-insns=): Fix typo.
+
2005-05-25 Daniel Berlin <dberlin@dberlin.org>
Jeff Law <law@redhat.com>
2005-05-17 Paolo Bonzini <bonzini@gnu.org>
+ * tree-ssa-math-opts.c: New file.
+
+2005-05-17 Paolo Bonzini <bonzini@gnu.org>
+
* Makefile.in: Add tree-ssa-math-opts.c.
* expr.c (expand_expr_real_1) <case RDIV_EXPR>: Never emit as a*(1/b).
* fold-const.c (distribute_real_division): New.
OSDN Git Service
